Fluid Control Contents
|
|
- Christal Fletcher
- 6 years ago
- Views:
Transcription
1 Fluid Control Contents Solenoid Valves with Differential ressure Series Material ressure Temperature Function age 8410 Brass 1/4" NT - " NT 1.45 to 3 psi 194 F / Brass 1/4" NT - 1" NT 1.45 to 145 psi 30 F / Brass 1/4" NT - " NT 7 to 580 psi 194 F / Brass 1/4" NT - 1" NT 14.5 to 363 psi 39 F / O GF 30 (NSF) 1/" NT - 3/4" NT 4 to 15 psi 1 F / Stainless steel 1/4" NT - " NT 1.45 to 3 psi 194 F / -16-1
2 Series 8410 /-way valves Orifice 0.3 to.0 For neutral gases and liquids Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to " NT Operating pressure: 1.45 to 3 psi (0.1 to 16 bar) (see technical data) Description Solenoid valve for air, water, and other neutral fluids Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required [4.35 psi (0.3 bar for EDM)] Fluid temperature: 14 F up to max. 194 F (-10 C up to max. +90 C) mbient temperature: 14 F up to max. 1 F (-10 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Seat seal: Internal parts: size NT Orifice inch Cv-Value Brass NBR Stainless steel, VDF For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - articularly suitable as a water valve according to DIN EN Technical data * Operating pressure psi NBR Normally open Manual override aa FM 30 F (110 C) bb aab b EDM 30 F (110 C) / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX XX.9101.XXXXX / XX.9101.XXXXX / XX.9151.XXXXX / XX.9101.XXXXX / XX.9151.XXXXX XX.9101.XXXXX XX.9151.XXXXX * For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC Solenoid 9101 / 9151 (standard voltages) DC C 50z 60z 4V 4V V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 ower consumption Solenoid DC C Inrush olding W 15V 1V W 45V 35V Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved -
3 Series 8410 Mounting bracket size NT 1/4, 3/8, 1/ / /4, 1 1/ Drawing legend Index Description B 101 Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts With solenoid 9101 size NT B 1/ / / / / / Service kits For valves with solenoid , , , For valves with solenoid 9151 With solenoid 9151 size NT B 1 1/ / Further options on request: - Explosion protected version - Flange connections - Sealed core tube - ulse model in DC only - ow power consumption W (only 4V DC) - With NT thread Further options (solenoids) XXXXXXX.9136 Solenoid in protection class x II GD EEx m II T4 T 130 C, with 3 m connection cable ,
4 /-way valves Orifice 0.3 to 1.0 For hot water and steam Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to 1" NT Operating pressure: 1.45 to 145 psi (0.1 to 10 bar) Series 8680 Click-on Solenoid interchangeable without tools Description (standard valve) Solenoid valve for hot water and steam Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required Fluid temperature: max. 30 F (+150 C) mbient temperature: max. 140 F (+60 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Seat seal: Internal parts: Brass NBR Stainless steel, Brass a a b b For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - articularly suitable as a water valve according to DIN EN Technical data Operating pressure psi size NT Orifice inch Cv-Value * NBR Normally open Manual override / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX XX.9101.XXXXX * For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC Solenoid 9101 (standard voltages) ower consumption DC C 50z 60z 4V 4V V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved C Solenoid DC Inrush olding W 15V 1V -4
5 Series 8680 Mounting bracket size NT 1/4, 3/8, 1/ / Drawing legend B Index Description 101 Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector * service kit consists of these individual parts. size NT B 1/ / / / Service kits For valves with solenoid Further options on request -5
6 Series /-way valves Orifice 0.3 to.0 For neutral gases and liquids Indirectly solenoid actuated iston valves Internal thread 1/4" NT to " NT Operating pressure: 7.5 to 580 psi (0.5 to 40 bar) (see technical data) Description (standard valve) Solenoid valve for air, water, and other neutral fluids Switching function: normally closed Flow direction: determined Differential pressure: 7.5 psi (0.5 bar) required Fluid temperature: -4 F up to max. 194 F (-0 C up to max. +90 C) mbient temperature: -4 F up to max. 1 F (-0 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Click-on Solenoid interchangeable without tools Material Body: Seat seal: Internal parts: Brass NBR Stainless steel, Brass, TFE For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - Compact piston valve - igh flow rate - Damped operation - Functional compact design - Solenoid in Click-on design - Stainless steel piston bushing a a b b Technical data size NT Orifice inch Cv-Value * NBR Normally open Manual override Operating pressure psi FM 110 C EDM 110 C Sealed core tube ** 1/ XX.9151.XXXXX / XX.9151.XXXXX / XX.9151.XXXXX / XX.9151.XXXXX XX.9151.XXXXX / XX.9151.XXXXX / XX.9151.XXXXX XX.9151.XXXXX ** For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC ** With solenoid DC 915 / C 9156 Solenoid 9151 (standard voltages) DC C 50z 60z 4V 4V V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 ower consumption C Solenoid DC Inrush olding W 45V 35V Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved C with rectifier plug only -6
7 Series Mounting bracket* Content: 1 stainless steel mounting bracket and screws size NT 1/4, 3/8, 1/ / Ø /4, 1 1/ * For image of valve with mounting bracket, see 8410 series (page 65) Drawing legend Index Description 101 Valve body 10 Valve cover *103 Valve plate 104 llen head screw *105 ressure spring *106 Gasket *107 O-ring *108 ip seal 400 Solenoid 701 Core tube *70 O-ring *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector R T * service kit consists of these individual parts. size NT ø 1 T 1/ / / / / / Service kits Further options on request For valves with solenoid
8 Sanitary utomation Flatsan /-way valves Description Solenoid Valve for potable water Switching function: normally closed Flow Direction: determined Fluid Temperature: +5 C up to +70 C mbient Temperature: +5 C up to +50 C Mounting position: as required Material Body in contact with media: Seals in contact with media: Other wetted materials: S EDM S, stainless steel Ø 8,8 Connector Rapp RR ,1 R 1 1,7,5 View on 9,9 6,4 1 O'ring 6x1.5 1 O'ring 8.5x1.5 Ø 11,1 Ø 3,5 1 Compact build for easy integration. atching coils with 1W power consumption. 3 Wide range of voltages and connections. 4 igh flow rates and pressures up to 10 bar. 5 Water tested for 300,000 cycles R 9 Ø 6,5 1,5 80 ` 5 Orifice inch Cv Value Operating pressure G/min m3/h psi Function atching Voltage ower Consumption Electrical connection /-Way Solenoid Valve Cartridge C U NC Yes 5 V DC 1.W ins Cartridge C U NC Yes 5 V DC 1.W R RR Cartridge C BFW NC Yes 9 V DC 1.W ins Cartridge C BFW NC Yes 9 V DC 1.W R RR
9 Sanitary utomation dditional Ranges Catridge valves FS Flatsan valves were designed with the requirements of the sanitary automation industry in mind. Easily achieving 300,000 cycles without service, the low power consumption and compact build allow easy integration into OEM products. Water pilots Quick to integrate into existing systems, FS water pilots were designed for minimal power and space usage. Customized interfaces are available. igh-flow diaphragm valves These valves are ideal where higher flows are required but space and power consumption are at a premium. wide range of connections and electrical options are available on request. Direct acting solenoid valves With integrated 15 mm compression fittings, these valves were designed for low water pressure, and function without a pressure differential. atching versions are available. WRS approved. -9
10 /-way valves Orifice 0.3 to 1.0 For neutral steam and liquids Indirectly solenoid actuated iston valves Internal thread 1/4" NT to 1" NT Operating pressure: 15 to 363 psi (1 to 5 bar) Description (standard valve) Solenoid valve for steam, hot water, and other neutral fluids Switching function: Flow direction: Differential pressure: Fluid temperature: mbient temperature: Mounting position: Material Body: Seat seal: Internal parts: normally closed determined 15 psi (1 bar) required 14 F up to max. 39 F (-10 C up to max. +00 C) 14 F up to max. 1 F (-10 C up to max. +50 C), with solenoid mounted vertical underneath, max. 140 F (+60 C) as required, preferably with solenoid vertical on top Brass TFE Stainless steel, FM, TFE Series Click-on Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - Compact piston valve - igh flow rate - Damped operation - Functional compact design - Solenoid in Click-on design - Stainless steel piston bushing a a b b Technical data Operating pressure psi size NT Orifice inch Cv-Value * TFE Normally open Manual override / XX.915.XXXXX / XX.915.XXXXX / XX.915.XXXXX / XX.915.XXXXX XX.915.XXXXX * For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC Solenoid 915 (standard voltages) ower consumption DC C 50z 60z 4V 4V V 10V 30V 0V C Solenoid DC Inrush olding W 15V 10V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved -10
11 Series Mounting bracket* Content: 1 stainless steel mounting bracket and screws size NT 1/4, 3/8, 1/ Ø 3/ * For image of valve with mounting bracket, see 8410 series (page 65) Drawing legend Index Description Valve body 10 Valve cover *103 Valve plate 104 llen head screw *105 ressure spring *106 Gasket *107 O-ring *108 ip seal 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector R T * service kit consists of these individual parts. size NT ø 1 T 1/ / / / Service kits For valves with solenoid Further options on request -11
12 Series /-way valves Orifice 0.5 to 0.8 For neutral gases and liquids Indirectly solenoid actuated Diaphragm valves Internal threads 1/" NT and 3/4" NT Operating pressure: 4.35 to 15 psi (0.3 to 10.5 bar) Description (standard valve) Solenoid valve for potable water and other neutral fluids Switching function: normally closed Flow direction: determined Fluid temperature: 41 F to max. 1 F (+5 C to max. +50 C) mbient temperature: 3 F to max. 1 F (0 C to max. +50 C) Mounting position: as required, preferably solenoid vertical on top Click-on Solenoid interchangeable without tools Material Body: olymer (O GF 30) Seat seal: EDM Internal parts: Stainless steel, VDF For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - International approvals Technical data valves size NT Orifice inch Cv-Value** * Solenoid in DC or C pressure psi 1/ XXXXX / XXXXX * For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC ** With gases and liquids up to 1 inch /s (cst) a a b This valve is tested and certified as a component by NSF International against NSF/NSI Standard 4 for materials and structural integrity requirements only and against NSF/NSI Standard 61 for material requirements only. b Solenoid 9101 (standard voltages) DC C 50z 60z 4V 4V V 10V 05V 30V 0V ower consumption C Solenoid DC Inrush olding W 15V 1V / 7W Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved -1
13 Series Drawing legend Index Description 101 Valve body 10 Valve cover *103 Diaphragm 104 ex head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts. size NT B 1/ / Further options (valves) XXXXX54.XXXX atching system (only in DC) XXXXX67.XXXX Normally open (NO) Further options on request Specific NSF listed voltages for this valve can be found on: -13
14 Water Treatment and urification Water treatment and purification Drinking water is one of the most valuable resources on Earth. Keenly aware of its limited supply, Norgren turned its attention to the water treatment and purification market years ago. Our range of products and solutions are suited for a range of demanding applications, ranging from sea water desalination through to water sample analysis. Diaphragm solenoid valves Buschjost s brass, stainless steel and plastic diaphragm valves are developed specifically for handling water and are ideal for controlling both the intake and treatment process flow. Direct acting solenoid valves Norgren s range of direct acting solenoid valves are ideal for applications with low operating pressure differential. Quick connectors such as integrated push-in or compression fittings allow easy installation into the fluid circuit. Media separated solenoid valves Well suited for chemical dosing applications or for handling low flows of high-grade deionised water, these valves are well established in the water purification industry
15 Water Treatment and urification Valve islands and pneumatic pilots Where flows or impurities are higher and pneumatically operated valves are used, Norgren s compact valve islands and range of pneumatic pilots can save critical assembly time and increase performance of the system. ir preparation Norgren s established range of air preparation equipment includes filters, regulators, and lubricators as well as pneumatic tubing and fittings. Water Treatment and urification Buschjost s new Series designed for the demanding needs of the water purification market. Solenoid completely encased; I65 protection Solenoid interchangeable without tools (Click-on ) Stainless steel jacketed threads Reliable diaphragm guidance at high flow rates, damped closing water hammer free Optimised range offers excellent flow rates This valve is tested and certified as a component by NSF International against NSF/NSI Standard 4 for materials and structural integrity requirements only and against NSF/NSI Standard 61 for material requirements only. -15
16 Series 8740 /-way valves Orifice 0.3 to.0 For slightly aggressive gases and liquids Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to " NT Operating pressure: 1.45 to 3 psi (0.1 to 16 bar) (see technical data) Description (standard valve) Solenoid valve for slightly aggressive gases and liquids Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required [4.35 psi ((0.3 bar) for EDM] Fluid temperature: 14 F up to max. 194 F (-10 C up to max. +90 C) mbient temperature: 14 F up to max. 1 F (-10 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Stainless steel Seat seal: NBR Internal parts: Stainless steel, VDF Click-on Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) Technical data size NT Orifice inch Operating pressure psi Cv-Value * NBR Normally open Manual override a a b FM 30 F (110 C) b EDM 30 F (110 C) / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX / XX.9101.XXXXX XX.9101.XXXXX / XX.9101.XXXXX / XX.9151.XXXXX / XX.9101.XXXXX / XX.9151.XXXXX XX.9101.XXXXX XX.9151.XXXXX * For orders please state voltage and frequency, e.g.: for 30V 50z or for 4V DC Solenoid 9101 / 9151 (standard voltages) ower consumption DC C 50z 60z 4V 4V V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN (included) The solenoids are U listed and CS approved Solenoid DC C Inrush olding W 15V 1V W 45V 35V -16
17 Series 8740 Mounting bracket* size NT 1/4, 3/8, 1/ / /4, 1 1/ * For image of valve with mounting bracket, see 8410 series Drawing legend 1400 B Index Description Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts With solenoid 9101 size NT Service kits For valves with solenoid , , , For valves with solenoid 9151 B , / / / / / / With solenoid 9151 size NT Further options (valves) - Explosion protected version - Flange connections - Sealed core tube - atching version in DC only - ow power consumption W (only 4VDC) - With NT thread Further options (solenoids) XXXXXXX.9136 B Solenoid in protection class x II GD EEx m II T4 T 130 C, with 3 m connection cable Further options on request 1 1/ /
18 Fluid Control Solutions Turn it to good use: Click-on -18
Contents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More informationFluid Control Contents
Fluid Control Contents Solenoid Valves without Differential ressure - Miniature Solenoid Valves Series Material Connection ressure Temperature Function age Chipsol Stainless steel Cartridge 0 to 6 psi
More informationTo order, quote model number from table overleaf, e. g for a DN 25 valve.
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads /4 to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More information2/2-way valves DN 8 to DN 50
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More information86740/ /2-way piston valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical
More informationAcoustic Signals Industrial Airhorns > AP Series Product overview
udible Signals INDUSTRIL IRHORNS SOUNDERS coustic Signals Industrial irhorns > Series roduct overview The Series of air horns are suitable for general purpose signalling where high output is required such
More information/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More information82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
More information/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
More informationContents. Series Material Connection Pressure Temperature Function Page Aluminium G 3/4 - G 2 1/ bar +85 C 2/2 202
Contents Valves for Dust Filters Series Material Connection ressure Temperature Function age 82900 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 202 82960 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 204
More information82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationServo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B
Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive
More informationSolenoid valves 2/2-way servo operated type EV220B 15 50
MAKING MODERN LIVING POSSIBLE Datasheet Solenoid valves 2/2-way servo operated type EV220B 15 50 EV220B 15 50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass,
More informationSolenoid valve Types EV220B 15 - EV220B 50
Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless
More informationSolenoid valves 2/2-way servo-operated Type EV220B 15-50
Solenoid valves /-way servo-operated Type EVB 5-5 Features EVB NC and NO For robust industrial application For water, steam, oil, compressed air and gases Flow range for water:. to 6 m³/h Differential
More informationSolenoid valve Types EV220B 15 - EV220B 50
Data sheet Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationData sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More information2/2 way Coaxial valve CXRM compact, pilot operated Modular design
2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More information% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationSolenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More informationThe extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to
More information2/2-way assisted lift operated solenoid valve type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet 2/2-way assisted lift operated solenoid valve type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More informationData sheet. Solenoid valves 2/2-way direct-operated Type EV210B. February 2002 DKACV.PD.200.A B1504
Data sheet Solenoid valves 2/2-way direct-operated Type EV210B February 2002 DKACV.PD.200.A5.02 520B1504 closed Type EV210B NC for neutral liquids and gases DN 1.5-25 B - G1 Features Technical data 1 )
More informationSolenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More information26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
More informationOur policy is one of continued research and development. We therefore reserve the right
For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust
More information97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
More information4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
More informationType EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet
Data sheet Servo-operated 2/2-way solenoid valves for high air Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
More informationFlow direction: Fixed. G1/4, G1/2 NAMUR G1/ Aluminium xxxx***** G1/4, G1/2 NAMUR G1/ Stainless steel xxxx*****
HERION 9805 SERIES Indirect solenoid actuated poppet valves with NMUR interface / - Internal thread G/, / NPT or flanged Main application: single operated actuators TÜV-approval based on IE 6 508,DIN V
More informationThe manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
More informationServo-operated 2/2-way solenoid valves for steam Type EV225B
Data sheet Servo-operated 2/2-way solenoid valves for steam EV225B EV225B is a servo-operated 2/2-way solenoid valve for use in steam applications. The design is based on a PTFE diaphragm concept, ensuring
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationServo-operated 2/2-way solenoid valves for high pressure
Data sheet Servo-operated 2/2-way solenoid valves for high Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
More information2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationTechnical Information
Technical Information Solenoid Valve Basics Switching Functions & Symbols.......................280 Number of Ways..................................281 Direct cting Solenoid Valves........................282
More information2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid. Low dead volume, low internal volume. High chemical resistance
2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid Low dead volume, low internal volume High chemical resistance Low power consumption Internal contours easily flushed Optional impulse
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT
Normally Closed or Normally Open Hot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT 2/2 Features Handle the challenges of high-temperature fluids PTFE and EPDM discs, stainless steel
More informationBurkert: The Global Supplier of Customized Fluid Control Solutions
Burkert: The Global Supplier of Customized Fluid Control Solutions With unmatched Reduction of Total Cost of Ownership Innovative LINK and NET Technology 50 subsidiaries worldwide What is it that makes
More informationSolenoid valves, 2/2-way servo-operated type EV220B 6-22
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves, 2/2-way servo-operated type EV220B 6-22 EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4 to 1. This
More informationZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref:
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE Model/Ref: 1422203 www.lauridsenindustri.com CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework.
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationSolenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationFunction. Orifice (mm) NBR (Perbunan) 0 EPDM 1 FKM (Viton) 2 FFKM (Kalrez) / O-ring FKM 4
Working from 0 bar up Short switching times Suited for fine vacuum down to 1,33 10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoid
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More information97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationSTAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More informationSolenoid Valves Catalogue
Solenoid Valves Catalogue lcon Solenoid Valve Range US Keeping the World Flowing Contents Section Page Section Page Introduction 3 U Series 4 U Series Exd 6 U3/U33 Series 8 U3/U33 Series Exd 0 68 Series
More informationS21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
More informationPilot operated solenoid valves for pneumatic actuators
Pilot solenoid valves for pneumatic actuators 3 / 2 and 5 / 2 way solenoid valves Orifice size 6 and 12 mm NAMUR and threaded connections Pressure range 0 (2) 8 bar For air and inert gases With TÜV-approval
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More information3/2 or 5/2 way solenoid valves. Direct NAMUR mount.
095 / or 5/ way solenoid valves. irect NMU mount. pplications 095 deally suited as pilot valves for single or double acting cylinders and actuators with NMU mount. ompact valve convertible from 5/ to /
More informationGSR - your partner for valve technology. Welcome to the world of valve technology. Your GSR Team
Welcome to the world of valve technology GSR - your partner for valve technology This is the world of solenoid valves, with and without explosion protection, of external medium-controlled valves and motorised
More information4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.
qwer Normally Closed or Normally Open and Hot Water Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Handle the challenges of high-temperature fluids. PTFE and EPDM discs,
More informationAir Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
More information3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
More information