86740/ /2-way piston valves
|
|
- Lambert Long
- 6 years ago
- Views:
Transcription
1 > > ort size: DN , G1/ (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical features Medium: Slightly aggressive gases and liquids Switching function: Normally closed Operation: Solenoid actuated, with forced lifting Mounting: Optional, preferably solenoid vertical on top Flow direction: Determined ort size: G1/4, G3/8, G1/2, G3/4, G1, G1 1/4, G1 1/2, G2 1/4 NT, 3/8 NT, 1/2 NT, 3/4 NT, 1 NT, 1 1/4 NT, 1 1/2 NT, 2 NT Operating pressure: bar ( psi) bar ( psi) Fluid temperature: C ( F) mbient temperature: C ( F) Material: Body: Stainless steel (1.4408) Seat seal: NBR Internal parts: Stainless steel, TFE / Carbon For contaminated fluids insertion of a strainer is recommended. Technical data - standard models Symbol ort size Orifice (mm) xxxxx lease insert voltage and frequency codes *1) Cv-value (US) kv value x 1,2 *2) For gases and liquid fluids up to 40 mm2/s (cst) Flow kv value *1) (m3/h) Operating pressure *2) (bar) Weight (kg) Model Model G1/4 8 2, , xxxxx xxxxx 1/4 NT 8 2, , xxxxx xxxxx G3/8 10 3, , xxxxx xxxxx 3/8 NT 10 3, , xxxxx xxxxx G1/2 12 4, , xxxxx xxxxx 1/2 NT 12 4, , xxxxx xxxxx G3/4 20 6, , xxxxx xxxxx 3/4 NT 20 6, , xxxxx xxxxx G , xxxxx xxxxx 1 NT , xxxxx xxxxx G1 1/ , xxxxx xxxxx 1 1/4 NT , xxxxx xxxxx G1 1/ , xxxxx xxxxx 1 1/2 NT , xxxxx xxxxx G , xxxxx xxxxx 2 NT , xxxxx xxxxx en
2 Option selector Thread form Standard solenoid systems Voltage and Frequency Solenoid 8301/8304 Code Voltage Code Frequency Voltage Frequency ower consumption Inrush Holding V d.c W 22 W V a.c. *1) Hz 25 V 25 V V a.c. *1) Hz 25 V 25 V V a.c. *1) Hz 25 V 25 V V a.c. *1) Hz 25 V 25 V Voltage and Frequency Solenoid 8401/ V d.c W 40 W V a.c. *1) Hz 45 V 45 V V a.c. *1) Hz 45 V 45 V V a.c. *1) Hz 45 V 45 V V a.c. *1) Hz 45 V 45 V *1) C with rectifier plug Further versions on request! ISO G 4 NT 5 ort size 1/4 0 3/8 1 1/2 2 3/ / / Valve options Normally open (NO), Mounting position: solenoid vertical on top Manual override, Seat seal FM, Fluid temperature C *3) Seat seal TFE, Fluid temperature C *3) Leakage rate E acc. to DIN EN Seat seal EDM, for hot water, Fluid temperature C Normally open (NO), Seat seal FM, Fluid temperature C *3), Mounting position: solenoid vertical on top Max. operating pressure 40 bar, Electrical position indicator with 2 limit switches (Reed contact) Seat seal FM, with larger bleed orifices in the piston, for fluids such as fuel and oil, viscosity max. 80 mm2/s (cst), Fluid temperature C *3), Designed for ammonia, Seat seal CR 75 Version for drinking water on request Electrical details for all solenoid systems Design DIN VDE 0580 Voltage range ±10% Duty cycle rotection class en Socket 100% ED EN I65 Form acc. to DIN EN (included) ccording to DIN VDE 0580 at a solenoid temperature of +20 C. t operating state temperature the input power of a coil decreases by up to ca. 30% due to physical reasons. dditional solenoid systems TEX category rotection class Solenoid Standard Voltages II2G Ex me II T3 T 140 C V d.c., 110 V a.c., 230 V a.c. II3G II3D II3G II3D Frequency See table frequency codes Voltage See table voltage codes Solenoid options Ex n IIB T4 Gc Ex tc IIIB T130 C Dc I *2) 24 V d.c., 110 V a.c., 230 V a.c. Ex n IIB T4 Gc Ex tc IIIB T130 C Dc I *2) 24 V d.c., 110 V a.c., 230 V a.c. ttention! The conditions imposed on the Ex approvals lead to reduction of the permissible standard temperature ranges in the cases of explosion protected solenoids. *2) d.c. only, for a.c. solenoids with design inspection certificate acc. to category 2, e. g. xxxxxxx.8441 *3) Up to max. 200 C fluid temperature with solenoid for higher temperature xx xxx
3 Section View 1/ NT *704 *705 *1505 *702 * *107 * No. Description 101 Valve body 102 Valve cover *103 Valve piston 104 Socket head cap screw ressure spring *106 Seal ring *107 Seal ring 400 Solenoid 701 Core tube *702 Straight pin 703 Round plate *704 ressure spring *705 Core 1400 Socket (included) 1501 Hexagon screw 1502 Round plate 1504 Gasket *1505 O-ring 1 1/ NT * *704 *705 *1504 *702 * *107 No. Description 101 Valve body 102 Valve cover *103 Valve piston 104 Socket head cap screw ressure spring (2x) *106 Seal ring *107 Seal ring 400 Solenoid 701 Core tube *702 Straight pin 703 Round plate *704 ressure spring *705 Core 1400 Socket (included) 1501 Hexagon screw 1502 Round plate *1504 O-ring (2x) * * These individual parts form a complete wearing unit. When ordering spare parts please state Model No. and Series No. en
4 Dimensions 1/ NT Dimensions in mm rojection/first angle H 60 2 H1 1 R T L1 L Ø 1 Solenoid rotatable Socket turnable 4 x 90 (Socket included) ort size R ø H H1 L L1 T Model G1/ , x.xxxxx 1/4 NT , x.xxxxx G3/ , x.xxxxx 3/8 NT ,5 10, x.xxxxx G1/ x.xxxxx 1/2 NT , x.xxxxx G3/ , x.xxxxx 3/4 NT , x.xxxxx G , x.xxxxx 1 NT , x.xxxxx en
5 1 1/ NT Dimensions in mm rojection/first angle 76, ,5 81,5 2 H1 1 R H T L1 L Ø 1 Solenoid rotatable Socket turnable 4 x 90 (Socket included) ort size R ø H H1 L L1 T Model G1 1/ ,5 183, x.xxxxx 1 1/4 NT ,5 183, x.xxxxx G1 1/ ,5 183, x.xxxxx 1 1/2 NT ,5 183, x.xxxxx G , x.xxxxx 2 NT , , x.xxxxx Note to ressure Equipment Directive (ED): The valves of this series, including the connection size DN 25 (G1), are according to rt. 4 3 of the ressure Equipment Directive (ED) 2014/68/EU (97/23/EG). This means interpretation and production are in accordance to engineers practice wellknown in the member countries. The CE-sign at the valve refers not to the ED. Thus the declaration of conformity is not longer applicable for this directive. For valves > DN 25 (G1) rt. 3 (1) No.1.4 applies: The basic requirements of the Enclosure I of the ED must be fulfilled. The CE-sign at the valve includes the ED. certificate of conformity of this directive will be available on request. Note to Electromagnetic Compatibility Guideline (EMC): The valves shall be provided with an electrical circuit which ensures the limits of the harmonised standards EN and EN are observed, and hence the requirements of the Electromagnetic Compatibility Guideline 2014/30/EU (2004/108/EG) satisfield. en
/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More information/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
More information82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
More information82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
More informationTo order, quote model number from table overleaf, e. g for a DN 25 valve.
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads /4 to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More information2/2-way valves DN 8 to DN 50
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More informationFluid Control Contents
Fluid Control Contents Solenoid Valves with Differential ressure Series Material ressure Temperature Function age 8410 Brass 1/4" NT - " NT 1.45 to 3 psi 194 F / - 8680 Brass 1/4" NT - 1" NT 1.45 to 145
More informationAcoustic Signals Industrial Airhorns > AP Series Product overview
udible Signals INDUSTRIL IRHORNS SOUNDERS coustic Signals Industrial irhorns > Series roduct overview The Series of air horns are suitable for general purpose signalling where high output is required such
More informationContents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
More informationFluid Control Contents
Fluid Control Contents Solenoid Valves without Differential ressure - Miniature Solenoid Valves Series Material Connection ressure Temperature Function age Chipsol Stainless steel Cartridge 0 to 6 psi
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More informationFunction. Orifice (mm) NBR (Perbunan) 0 EPDM 1 FKM (Viton) 2 FFKM (Kalrez) / O-ring FKM 4
Working from 0 bar up Short switching times Suited for fine vacuum down to 1,33 10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoid
More information2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
More informationContents. Series Material Connection Pressure Temperature Function Page Aluminium G 3/4 - G 2 1/ bar +85 C 2/2 202
Contents Valves for Dust Filters Series Material Connection ressure Temperature Function age 82900 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 202 82960 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 204
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More information% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More informationHERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
More informationSolenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationFlow direction: Fixed. G1/4, G1/2 NAMUR G1/ Aluminium xxxx***** G1/4, G1/2 NAMUR G1/ Stainless steel xxxx*****
HERION 9805 SERIES Indirect solenoid actuated poppet valves with NMUR interface / - Internal thread G/, / NPT or flanged Main application: single operated actuators TÜV-approval based on IE 6 508,DIN V
More information97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
More informationHigh Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationTechnical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationHigh Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
More information97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface
9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More information2/2 way Coaxial valve CXRM compact, pilot operated Modular design
2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / way poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V 9 Valves for safety systems up to SIL Solenoid valve
More information4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information3/2 and 4/2 directional seat valves with solenoid actuation
1/16 3/ and 4/ directional seat valves with solenoid actuation RE 047-XH-B/01.10 Replaces: 09.07 ype E-.SE 6...XH ype W-.SE 6...XH Size 6 Component series 6X Maximum operating pressure 40 bar Maximum flow
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More informationProportional pressure reducing valve, in 3-way version
roportional pressure reducing valve, in 3-way version RE 29184/06.11 Replaces: 12.02 1/12 ype 3DRE and 3DREE Size 6 Component series 2X Maximum operating pressure Maximum flow 100 bar 15 l/min able of
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationDSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More informationProportional pressure reducing valve of 3-way design
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics
More information97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
More informationSolenoid valve Types EV220B 15 - EV220B 50
Data sheet Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationNAMUR FLANGE: With integrated exhaust air recirculation Ordering information
00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled
More informationSolenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More informationDSE3B /118 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 215/118 ED DSE3B DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 4401-03 p max 350 bar Q max 40 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP 4.2-4-03-350)
More information5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
More information02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
More informationFunctional Symbols and Application Notes
Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol
More information3/2 and 4/2 directional poppet valve with solenoid actuation
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component
More information2/2-way assisted lift operated solenoid valve type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet 2/2-way assisted lift operated solenoid valve type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve
More informationInline Paddle Wheel Flow Switch
Inline addle Wheel Flow Switch Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type can be combined with... Valve Alarm
More information4-way directional servo-valve
4-way directional servo-valve RE 29564/09.10 Replaces: 01.07 1/12 Type 4WS.2E Size 6 Component series 2X Maximum operating pressure 315 bar Maximum flow 48 l/min HD5994 Table of contents Contents age Features
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More informationANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
More informationValve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow l/min see par
41 510/112 ED EXPLOSION-PROOF VERSION SOLENOID OPERATED DIRECTIONAL CONTROL VALVES in compliance with ATEX 94/9/EC MD1K ISO 4401-03 (CETOP 03) E4P4K CETOP P05 E07P4K ISO 4401-07 (CETOP 07) E5P4K ISO 4401-08
More information% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationThe New Filter Valve Technology
The New Filter Valve Technology HIGH FLOW, QUICK RESPONSE.. Connections Ports available in NPT, and BSPP G thread to international standards Response Minimized space above the diaphragm guarantees fast
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More informationServo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B
Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive
More informationSolenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
More informationSolenoid valve Types EV220B 15 - EV220B 50
Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationOur policy is one of continued research and development. We therefore reserve the right
970 Namur /-, /- and /-Directional control valves Electromagnetic indirectly controlled soft seal spool valves G /4, /4 NPT NAMUR-interface For single and double operated actuators Exhaust air recirculation
More informationLifting / Lowering valve type HSV
Lifting / Lowering valve type HSV Flow Q max = 160 lpm p max = 400 bar Type HSV 21(22) Example circuit Type HSV 61 Type HSV 21 R2-150 - G 24 1. General information This valve combination type HSV is preferably
More informationLifting / Lowering valve type HSV and HZV
Lifting / Lowering type HSV and HZV Flow Q max = 160 lpm p max = 400 bar Type HSV 21(22) Example circuits Type HZV 21 R6/10-150 - G 24 Type HSV 41(6 Type HSV 21 R2-150 - G 24 1. General information This
More information3/2 and 4/2 directional seat valves with solenoid actuation
1/16 /2 and 4/2 directional seat valves with solenoid actuation RE 22047-XH-B2/09.12 Replaces: 05.12 ype E-.SE 6...X... ype W-.SE 6...X... Size 6 Component series 6X Maximum operating pressure 420 bar
More information/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More information2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat. N/en
00 / poppet valves electromagnetic actuated, directly controlled, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 8, DIN V Valves for safety systems up to SIL Solenoid valve also suitable
More informationTechnical Principles of Valves
Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationRPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More information5 Port Solenoid Valve
ort Solenoid Valve 7-6/7-8 Series Metal Seal Rubber Seal ISO Standard Size /Size 7-8/Single unit. Conforms to ISO standard /I Interface conforms to ISO standard Size (7-6) and Size (7-8). Outstanding high
More informationFor single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010
4/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-4 /4-16 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 7/2012 Replaces 10/2010 4/2 way cartridge valves solenoid operated spool
More informationV82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More information