Burkert: The Global Supplier of Customized Fluid Control Solutions

Transcription

1

2 Burkert: The Global Supplier of Customized Fluid Control Solutions With unmatched Reduction of Total Cost of Ownership Innovative LINK and NET Technology 50 subsidiaries worldwide What is it that makes Burkert a global supplier of Customized Fluid Control Systems and Solutions? It is the combination of innovative technology and a convincing philosophy. Burkert puts its motto Easy into practice. With intelligent products and systems solutions, the Easy technology makes it easy to control flow, level, analysis, pressure or temperature. Process knowledge, coupled with the systems and the knowhow of Burkert s engineers, results in economical controls in virtually all applications. Burkert s services range from application and system engineering through support during installation and commissioning, up to after sales service and hotline assistance. The sensor, valve and controller systems are completely pre-assembled, ready for immediate installation and operation. full system integration by Easy LINK and full communication capability by Easy NET for flow, level, analytical, pressure and temperature control. Easy LINK conforms to the principle of Decentralized Intelligence in the automated process, whereby each loop has its own control and communication intelligence. Decentralized Intelligence means combining the controller with either the valve or the sensor. This concept allows Easy LINK to be applied with most of the usual and proven technologies (analog, frequency, binary and relay). The choice of technology depends on the control method used: Monitoring, ON/OFF, Continuous Solenoid or Continuous Pneumatic Control. Burkert serves a multitude of diversified markets that include food & beverage, water treatment, textiles, pulp & paper, fine chemicals, pharmaceuticals and semi-conductors. Burkert s strength also lies in engineering analytical and medical devices. More than 20 new systems and products are introduced in this wide range of markets every year. Thus Burkert has made a name for itself as the most dynamic and innovative systems developer in the industry. The Easy Technology Burkert is the only company able to offer customers complete Fluid Control Solutions which are based on Easy LINK is effecting a more reliable process, more efficient process data communication and notably reduced Total Cost of Ownership. Thus Easy LINK is the simplest and best adapted pointto-point connection between sensor and valve. The innovative Easy NET system permits sensors, valves and controllers to communicate with a higher automation level via binary and analog signals as well as fieldbusses: PROFIBUS, DeviceNet, INTERBUS and AS-Interface. The process valves with integrated PID controllers and fieldbus interfaces enable the most efficient

3 communication to a PLC. The Easy NET technology makes it possible to transmit external set points, process values, diagnosis signals and control commands. Control Systems are basically differentiated into ON/OFF, Continuous Solenoid and Continuous Pneumatic Control Systems. For all these systems Burkert has the appropriate sensor, valve and controller technologies, perfectly suited for all liquids or gases to be controlled - whether pure, viscous, lubricated or particle loaded fluids. The choice of control method is determined by the process accuracy demanded. Usually the Total Cost of Ownership is dominated by hidden but very timeconsuming work such as installation, programming, testing and maintenance. The innovative Easy System of Burkert reduces this additional work to a minimum, resulting in a fraction of the previous cost and generating an unbeatable low Total Cost of Ownership for the customer. Burkert s Customized Fluid Control Solutions: - to order - to install - to commission - to operate - to maintain - to service

4 Analytical Valve Systems Burkert offers a wide range of Analytical Valve Systems in several industrial fields that have been specially developed for high demands and are produced under clean-room conditions. The materials utilized guarantee first class quality and reliability. The dead volume free design ensures a process without any entrainment. A diaphragm provides perfect separation of fluid and valve mechanics. A new and revolutionary MICRO System for nano-liter dispensing has been introduced in the market. This Customized Fluid Control System is based on a unique combination of micro system technology flow sensor and micro flipper solenoid valve with isolating diaphragm. Local service teams consult and support customers during engineering of Customized Analytical Valve Systems mounted on a customized manifold with integrated piping. That results in an optimized Total Cost of Ownership. Pre-assembly and testing is another good reason for confiding in the skillful experts of Burkert. Solenoid Valve Systems Solenoid Valve Systems from Burkert are suited to operate with neutral, aggressive and contaminated fluids, steam and other high temperature media. For contaminated media Burkert offers solenoid valves with isolating diaphragms. The spectrum of products ranges up to Solenoid Valve Systems with integrated flow sensors. Universal solenoid valves are available as top quality single devices made of stainless steel, brass or plastic that can be utilized for various purposes. A wide range of seal materials has been proven to use with acids, lyes, corrosive and toxic fluids. Water valves are developed in a compact and water hammer free design. To protect against explosion Burkert has introduced several Solenoid Valve Systems with special approvals in the market. The sophisticated Easy LINK technology connects the solenoid valve to an intelligent sensor and allows the direct control of the valve. Burkertś Customized Solenoid Valve Systems are pre-assembled and tested. Sensor/Instrumentation and Controller Systems Burkert s easy to handle Sensor and Controller Systems have proven their outstanding performance all over the world. The Burkert product program contains sensor/ switches and transmitters for flow, level, analysis, pressure and temperature. Controller systems are available for batch, ph control and chlorine control. Easy LINK technology makes it possible to connect the sensor/switches and transmitters to valves or controllers forming high-performance systems with Decentralized Intelligence. The Sensor and Controller Systems from Burkert optionally include a fieldbus interface and allow compatibility to a higher automation level via Easy NET.

5 Process Actuation Systems The broad product range of Burkert Process Actuation Systems varies from pneumatic single pilot valves through valve islands up to the Remote Process Actuation Control System AirLINE suitable to control even complex applications. Banjo valves are designed for direct and quick mounting onto pneumatic actuators for the process industry. Special types of Process Actuation Systems have NAMUR connections ensuring easy assembly on different pneumatic actuators. The unique Remote Process Actuation Control System AirLINE offers any combination of valve island functionality, electronic I/O modules and fieldbus connectivity in a very compact and revolutionary design even with integrated Mini PLC. The field of explosion protection is another important application area of Process Actuation Systems. Various types of protection are available. The unique Easy LINK and Easy NET technology permits connection to an intelligent sensor and a higher automation level, respectively. Process Valve Systems The spectrum of Process Valve Systems is capacious: it contains angle seat valves, globe valves, diaphragm and quarter-turn valves which are actuated in pneumatic, electrical or manual manner. Burkert Process Valve Systems are obtainable for ON/OFF and Continuous Control. TOP and SIDE Control units with Decentralized Intelligence are designed to be combined with almost every process valve. They have an integrated positioner and a PID controller which can be connected via Easy LINK to a sensor. The advantages are obvious: programmable flow characteristics, low wiring costs and improved communication methods resulting in an optimized Total Cost of Ownership. Easy NET integrates the system to the next higher automation level. The Intelligent Sensors ALL IN ONE set new standards in Indication, Monitoring, Transmitting and ON/OFF Control - and can be obtained for flow, analytical, pressure and temperature control. The user-friendly large display indicates the process value in digits and as a scalable bar graph. The process value is measured and transmitted to a controller via Easy LINK. Freely programmable switching points can be defined both in hysteresis and window mode over the entire measuring range for monitoring. ON/OFF Control enables the entry of internal and external set point values and in addition permits communication with analog output signals to an external PLC. Remote operation allows separating display and sensor unit.

6 SELECTION CHART to select Gases Liquids Sensor Systems 2/2-Way 3/2-Way 2/2-Way Port connection [inch] Orifice [inch] Pressure [psig] Compressed air Dry air Neutral gases Water Hotwater up to 120 o C Demineralized water Slightly dirty fluids Slightly aggressive Aggressive fluids Steam Miniature, direct acting Compact, direct acting Zerodifferential pressure Servo- Assisted Angle-Seat Isolating Diaphragm Miniature, direct acting Compact, direct acting Isolating Diaphragm Ball Valves Electrically Pneumatically Angle-Seat Globe Valve Control Valve Diaphragm Manually Pneumatically Pilots SOLENOID VALVE SYSTEMS 1/8 1/16-3/ /8-3/8 5/64-1/ /4 5/64-1/ /4-3/8 1/8-1/ /4-1 3/8-3/ /8-2 3/8-11/ /2-1 1/ /8-1 3/8-3/ /2-2 1/ /2-2 1/ /2-1 7/ /8-1 7/16-9/ /4 1/8-5/ /2-2 1/ /8 3/64-1/ /8-1/4 5/64-7/ /4 5/64-1/ PROCESS VALVES 1/4-1 1/2 3/8-11/ /4-1 1/2 3/8-11/ /8-3/4 1/2-3/ /2-2 1/2 1/2-21/ Flange 1/ /2-2 1/ /4-2 1/ /4-2 1/ /4, NAMUR 3/64-1/ Page Page Page ,54 53,54 53,54 53,54 53,54 53,54 55,56 55,56 55,56 55,56 55, SENSORS/TRANSMITTERS/BATCH CONTROL Flow Control Flow Sensor/Switch for Easy ON/OFF Control Flow Sensor/Transmitter for Continuous Control Magmeter Analytical Control Inductive Conductivity Transmitter Temperature Control Temperature Sensor/Switch for Easy ON/OFF Control Pressure Control Pressure Sensor/Switch for Easy ON/OFF Control Level Control Ultrasonic Level Transmitter ,66 65,68 65,

7 SELECTION GUIDE 2/2-Way Solenoid Valve Systems Miniature, direct acting 8 Compact, direct acting Zero-differential pressure Servo-Assisted Angle-Seat 31 Isolating Diaphragm 13 3/2-Way Solenoid Valve Systems Miniature, direct acting 32 Compact, direct acting 33,36 Isolating Diaphragm Quality Certificates Explosion protection to Eurostandard Underwriters Laboratories Canadian Standard Association European Community Process Valves Ball Valves Angle-Seat Globe Valve Control Valve Isolating Diaphragm Pilots Sensor Systems Flow Control Analytical Control Temperature Control Pressure Control Level Control Accessories Timer; Cable Plugs Quality System ISO 9001 Technical Information 82 Type specification in 83 numeric order Burkert International 87

8 Miniature Solenoid Valve with threaded port connection 2/2-Way, Miniature Normally closed /2-Way, NPT 1 /8, psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions, as required 6011 High-quality FPM seal material standard Direct acting. Brass body valve for neutral gases and liquids such as compressed air, water, hydraulic oil. Stainless steel valve for more difficult and slightly aggressive media. Suitable for technical vacuum. Pressure range psig, max. -10 o C o C +55 o C, max. Brass, stainless steel FPM Coil material Polyamide Power consumption DC: 4 W AC: 9 VA (inrush), 6 VA (hold) IP 65 (standard delivery: cable plug cable plug DIN C, V) Options - Wide range of cable plug options Type 2506 with LED and varistor (see page 81) x M3 6 depth NPT/8 A/F with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] Brass valve body NPT 1/8 1/ NPT 1/8 5/ NPT 1/8 3/ Stainless steel valve body NPT 1/8 1/ NPT 1/8 5/ NPT 1/8 3/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Brass valve body D S T U V W X Y H A F U Stainless steel valve body T U V W X Y Z A B G V W 8

9 Compact Solenoid Valve for neutral gases and liquids Normally closed /2-Way, NPT 1 /8 to NPT 3 /8, psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions, as required 2/2-Way, Compact Modular direct acting solenoid valve system with brass body. Ideal for neutral gases and liquids such as compressed air, natural gas, water, hydraulic oil. Suitable for technical vacuum. High-quality FKM seal material standard 6013 Pressure range 0 to 355 psig, max. +14 o F o F +131 o F, max. Brass FKM Coil material Polyamide Power consumption DC: 8 W 10W (34VA, 14VA) AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - s - Explosion Proof CSA Class 1 Div1 Class H Coil Variable dimensions [inch] A B C D E F Threaded port NPT 1/ Threaded port NPT 1/ with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/8 5/ NPT 1/8 7/ NPT 1/8 1/ NPT 1/4 1/ NPT 1/4 5/ NPT 3/8 1/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz T U V W F G M A W X Y H A F U V W X Y Z H W Y Y 9

10 Customized Solenoid Valve Systems Fluid Control Solutions Wide product range for neutral and difficult media Customized, pre-assembled and tested systems High reliability and safety in operation Monitoring and ON/OFF Control with LINK Intelligent Sensor/Switch ALL IN ONE with outstanding Human-Machine Interface sets new standards in Easy LINK allows the direct control of a solenoid valve, a process valve or other devices. Easy LINK connection leads to unmatched economical solutions for any measuring parameter. Easy NET integrates the intelligent sensor in fieldbus configurations (e.g. AS-Interface). Indication Monitoring Transmitting ON/OFF Control 10

11 Compact Solenoid Valve for more difficult and slightly aggressive media Normally closed /2-Way, NPT 1 /8 - NPT 1 /4, psig Medium is only in contact with the valve internals and body High-quality FKM seal material as standard 2/2-Way, Compact Modular, direct acting solenoid valve system. Stainless steel body for more aggressive media. Suitable for technical vacuum. Pressure range psig, max. +14 o F o F +131 o F, max. Stainless steel FKM Coil material Polyamide Power consumption DC: 8 W AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - LED cable plug - Haz-EX CSA Class 1 Div1 H rated coil Coil can be changed easily with valve in place 6013 Variable dimensions [inch] A B C D E F Threaded port NPT 1/ Threaded port NPT 1/ Threaded port NPT 1) 1/ ) Only for version NPT 1/4, orifice 5/32 with H conduit plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/8 5/ NPT 1/4 5/ NPT 1/4 1/ NPT 1/4 1) 5/ ) Only for version NPT 1/4, orifice 5/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz B C D E F G R J S T U D K 1) L 1) M 1) N 1)

12 Solenoid Valve for steam and media at high temperatures up to 356 o F 2/2-Way, Compact 6013 Normally closed 6013 Modular direct acting solenoid valve system with brass body and stainless steel seat. For neutral gases and liquids, high temperatures such us hot water, steam, hot air, thermal oils. Applications: heating, sterilizing, impregnating. Pressure range psig, max. (max. steam pressure is o F) 14 o F o F +130 o F, max. Brass Seat material Stainless steel PTFE/Graphite Coil material Epoxy Power consumption 32 mm coil: DC: 8 W AC: 24 VA(inrush),17 VA(hold) 40 mm coil: DC: 10 W AC: 30 VA(inrush),22 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN A) Options - Version up to 250 o F with Epoxy coil and EPDM seal - LED cable plug - Haz-Ex CSA Class 1 Div.1 2/2-Way, NPT 1 /4, psig Fluid temperature up to 356 o F Erosion resistant, st.steel seat High-quality seal material PTFE standard Media is only in contact with the valve internals and body Variable dimensions [inch] Coil A B C D E F 1.26" mm NPT 1/ " mm NPT 1/ Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/ NPT 1/4 1/ with standard-cable plug V AC/DC 24/DC 24/60 120/60 240/ C 1) D 1) N 1) P 1) D 2) S 2) T 2) U 2) 1) 1.26" coil, 8W; 2) 1.58" coil, 10W 12

13 Solenoid Valve with Isolating Diaphragm; for neutral, aggressive, slightly contaminated fluids Normally closed Normally open 330 2/2-Way, NPT 1 /4, psig Separating diaphragm isolates solenoid system from operating fluid Long service life, even in nonlube conditions Insensitive to slightly contaminated fluids 2/2-Way, Isolating diaphragm 330 Direct acting valve with pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. Making it less sensitive to contaminated fluids than a plungertype system and provides a long service life, even in unlubricated applications. Pressure range psig, max. +14 o F o F +131 o F, max. Brass, stainless steel FPM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN A, V) Options - EPDM seal - Vacuum - Electrical feedback signaller Impulse coil (zero watt coil) NPT 1/ with standard-cable plug V AC/DC Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] Brass valve body (normally closed) NPT 1/4 1/ NPT 1/4 5/ Stainless steel valve body (normally closed) NPT 1/4 1/ NPT 1/4 5/ Brass valve body (normally open) NPT 1/4 1/ NPT 1/4 5/ Stainless steel valve body (normally open) NPT 1/4 1/ NPT 1/4 5/ ) Flow rate reduced 20% with DC-current operation Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/60 Brass valve body (normally closed) US US US US US US US US Stainless steel valve body (normally closed) V US E F T US U V Brass valve body (normally open) A K L R E F G H Stainless steel valve body (normally open) N K G H A B C D 13

14 Solenoid Valve for 150# Steam and 356 F Neutral Fluids 2/2-Way, Compact 255 Normally closed Direct acting solenoid valve system. For neutral gases and liquids, high temperature fluids such as hot water, steam, hot air and thermal oils. Applications: heating, sterilizing /2-Way, NPT 1 /4 - NPT 3 /8, psig Fluid temperature up to 356 o F Metal seal between coil and valve body Stainless steel seat eliminates danger of erosion and dezincification Pressure range Coil material Power consumption cable plug Options - High temperature version up to 480 F - 1/32 orifice for high pressure to 1400 psig psig, max. -40 o F... max. steam +356 o F +131 o F, max. Brass, stainless steel PTFE Epoxy DC: 12 W AC: 35 to 40 VA (inrush) IP65 (standard delivery: H conduit plug) Dimensions: Brass version with standard cable plug V AC/DC Port Orifice Cv Pressure R. Material Weight connect. (AC) (DC) 1) Body Seal [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 1/ Brass PTFE 1.5 NPT 1/4 1/ St.Steel PTFE 1.5 NPT 1/4 5/ Brass PTFE 1.5 NPT 1/4 5/ St.Steel PTFE 1.5 NPT 1/4 1/ Brass PTFE 1.5 NPT 1/4 1/ St.Steel PTFE 1.5 NPT 3/8 1/ Brass PTFE 1.5 NPT 3/8 5/ Brass PTFE 1.5 NPT 3/8 1/ Brass PTFE 1.5 1) Dependent from media temperature V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz P Q R J K L M W X A C Z S T U V W X Y Z A B G V on request CD 0058 K M CD on request CD 0140 V J L CD 0014 P U W CD 00584

15 Water Valve Systems for ON/OFF Control Complete program of high reliability water valves with options for Diagnostic and Insensitive to slightly contaminated and aggressive fluids due to separating diaphragm Waterhammer-free Operating as from zero pressure Monitoring due to integrated flow / no flow sensor ON/OFF Control with LINK NET with AS-Interface connectivity 15

16 Zero-differential Pressure 6213 Solenoid Valve for clean neutral liquids up to 194 o F Normally closed /2-Way, NPT 1 /4 - NPT2, psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Modular, servo-assisted solenoid valve system. Operates with zero pressure differential. For clean neutral liquids such as water and oils. Pressure range Coil material psig, max. +14 o F o F +131 o F, max. Brass NBR Polyamide Power consumption DC: 10 W (Orifice 1/4,3/8,1/2,3/4) AC: Orifice [inch] 3/8 1/2 3/4 1 11/2 Inrush [VA] Hold [VA] Hold [W] IP65 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [inch] - AC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/ /2 1/ /4 3/ / /2 1 1/ / Variable dimensions [inch] - DC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/ /2 1/ /4 3/ with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 1/ NPT 3/8 3/ NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/ NPT 1 1/2 1 1/ NPT 2 1 1/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz N P D S T G V W X Y L Z S T H C X Y Z S T C D A X Y Z S 1) NPT 1/4 UL Recognized Only

17 Solenoid Valve for hotwater, low pressure steam up to 248 o F Normally closed /2-Way, NPT 1 /4 - NPT2, psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Zero-differential Pressure 6213 Servo-assisted solenoid valve system. All valves operate with zero pressure differential. Ideal for hot water, oil, washing and bleaching lyes and low pressure steam applications. Pressure range psig, max. -22 o F o F +131 o F, max. Brass EPDM Coil material Epoxy Power consumption DC: 10 W (Orifice 1/4,3/8,1/2,3/4) AC: Orifice [inch] 3/8 1/2 3/4 1 11/2 Inrush [VA] Hold [VA] Hold [W] NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [inch] - AC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/ /2 1/ /4 3/ / /2 1 1/ / Variable dimensions [inch] - DC-Version Port Conn. Orifice [Inch] [inch] C D E F L A/F A B H I K 1/4, 3/8 3/ /2 1/ /4 3/ with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/4 3/ NPT 3/8 3/ NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/ NPT 1 1/2 1 1/ NPT 2 1 1/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz X Y H A T U V E F V J K L M N P W X Y Z A B Q D E F G H 17

18 Zero-differential Pressure 6213 Stainless Steel Solenoid Valve for more aggressive media up to 195 o F Normally closed /2-Way, NPT 1 /4 - NPT1, psig Zero differential pressure High reliability Waterhammer-free Compact design with high flow rates Servo-assisted solenoid valve system. All valves operate from zero pressure. For more difficult and slightly aggressive fluids. Pressure range psig 14 o F o F +130 o F, max. Stainless steel 316L FKM Coil material Polyamide (DN 10-20) Power consumption DC: 10 W (DN 10/13/20) AC: DN [mm] Inrush [VA] Hold [VA] Hold [W] NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Variable dimensions [Inch] - AC-Version Port C. DN [Inch] [inch] C D E F L A/F A B H I K 1/4 3/ /8 3/ /2 1/ /4 3/ / Variable dimensions [Inch] - DC-Version Port C. DN [Inch] [inch] C D E F L A/F A B H I K 1/4 3/ /8 3/ /2 1/ /4 3/ / with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 3/ NPT 3/8 3/ NPT 1/2 1/ NPT 3/4 3/ NPT 1 3/ Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/ A B C D E F Q R W K L M N P Q R S T Y M 18

19 Intelligent Sensor ALL IN ONE Intelligent Sensor/Switch with outstanding Human-Machine Interface sets new standards in Indication, Transmitting, Monitoring and ON/OFF Control. Indication Transmitting Monitoring ON/OFF Control These intelligent multifunctional sensor/switches are available for flow, analytical, temperature and pressure control. The user-friendly display indicates the process value both in large digits and as a scalable bargraph. The process value is measured and transmitted to a controller via Easy LINK connection. Freely programmable switching points can be defined both in hysteresis and window mode over the entire measuring range for monitoring. Easy LINK allows the direct control of a solenoid valve, a process valve or other devices. ON/OFF Control enables the entry of internal and external setpoint values and in addition permits communication with an analog output signal to an external PLC or industry PC. The control precision lies around 5%. The Easy LINK connection leads to unmatched economical solutions for any measuring parameter. Remote operation allows separating display and sensor. Easy NET integrates the intelligent sensor in fieldbus configurations (e.g. AS-Interface). Improve your Total Cost of Ownership with this attractive, innovative solution. 19

20 Zero-differential Pressure 407 Solenoid Valve for 150# steam and media at high temperatures up to 356 o F Normally closed 407 2/2-Way, NPT 1 /2 - NPT1, psig Zero differential pressure Fluid temperature up to 356 o F High reliability Stainless steel seat eliminates danger of erosion and dezincification Extremely reliable servo-assisted (zero differential pressure) valve for steam and other hot neutral fluids. hot air etc., for use on the vacuum side of autoclaves, in the textile, plastic and woodworking industries. Pressure range psig, max. +32 o F o F +131 o F, max. Brass (valve seat 305 S.St.) PTFE Coil material Epoxy Power consumption AC: VA (inrush), 35 VA (hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) H1 J1 A1 B1.15 Variable dimensions [inch] Port Conn. Orifice A1 B1 F1 E1 L1 J1 H1 A/F [inch] NPT 1/2 1/ NPT 3/4 3/ NPT L1 F1 C A/F E1 with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/2 1/ NPT 3/4 3/ NPT V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz on request B P on request on request P C N on request U D on request 20

21 Solenoid Valve, Waterhammer-free for neutral fluids Normally closed /2-Way, NPT 1 /2 - NPT2, psig High reliability Modular solenoid coil-system Waterhammer-free, low noise Compact design with high flow rates 2/2-Way, Servo-Assisted 5281 Modular, servo-assisted solenoid valve system, for city water, neutral gases and clean liquids. Require 2.8 psig acoss the valve open. Applications: process systems, chemical processing. water/sewage treatment and sterilizers. Pressure range psig, max. +14 o F o F +131 o F, max. Brass NBR Coil material Polyamide Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Manual override - 5 W power consumption - 2 W power consumption - LED cable plug - Valve mounted timer systems.21 A B A/F 0.55 G1/ Variable dimensions [inch] DN XX Port Conn. Orifice A B F E L A/F [inch] [inch] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT F L D A/F E with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz V W X Y H A F U V W X Y Z S B C S P Q R J K L W 21

22 2/2-Way, Servo-Assisted Solenoid Valve, Waterhammer-free for neutral fluids, normally open Normally open /2-Way, NPT 1 /2 - NPT2, psig High reliability Waterhammer-free Compact design with high flow rates 0281 Shown UR-version Modular, normally open, servo-assisted solenoid valve system, for city water, neutral gases and clean liquids. Requires 2.8 psig across the valve to open. Applications: process systems, chemical processing, water/sewage treatment. Pressure range psig 14 o F o F +130 o F, max. Brass NBR Coil material Epoxy, coil cover brass Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN A) Options - LED cable plug - Valve mounted timer systems Shown UR-version B1 A1 Variable dimensions [inch] Port Connection Orifice [inch] A1 B1 F E1 L1 A/F NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT L1 F D E1 with H conduit plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT /DC 24/ / / T U V W X Y Z A B Q D E F G H A B L M H W X Y Z 22

23 Time for a New Technology in Flow Indication Piping upon customer needs - position independent flow indication Less piping, maintenance-free technology considerably reduces Total Cost of Ownership ALL IN ONE : Indication, Monitoring, Transmitting and ON/OFF Control in one device Remote operation allows separating display and sensor Complete communication due to external setpoint, Easy LINK or AS-Interface

24 AS-Interface Overview 2510/11 ASi Cable plug according to DIN 43650, Form C and A 2510/ /11 Compatible valves: - With separating diaphragm - Rocker solenoid valves for analytical applications - Banjo and NAMUR valves / 8631 / 8633 ASi Control HEADS for various process valves Compatible valves: - Angle seat - Globe - Diaphragm - Quarter-Turn / 8640 ASi Centralized process actuation solution for the processing industries Sensors ASi Sensors for flow, temperature, level and pressure control

25

26 2/2-Way, Servo-Assisted 6212 Brass Solenoid Valve for slightly contaminated fluids Normally closed /2-Way, NPT 3 /8 - NPT1, psig Separating diaphragm isolates solenoid from operating fluid Low power consumption (no relay necessary when used with a PLC) Easy Diagnostics Modular, low-power, servo-assisted valve system with Burkert s revolutionary Rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to slightly contaminated. Pressure range 1) psig 32 o F o F +130 o F, max. Brass NBR Coil material Polyamide Power consumption DC: 3.4 W UC (universal voltage): 4 W IP 65 (standard delivery: cable plug cable plug DIN A) Spade location sidewards B B Spade location on top Options - Diagnostics: - Flow or no flow switch - Normally open (N.O.) - FPM or EPDM seal L F L F G C Variable dimensions [inch] Port Connection Orifice [inch] B1 B2 C F L NPT 3/8 3/ NPT 1/2 3/ NPT 1/2 1/ NPT 3/4 1/ NPT 3/4 3/ NPT 1 3/ with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [oz.] NPT 3/8 3/ NPT 1/2 3/ NPT 1/2 1/ NPT 3/4 1/ NPT 3/4 3/ NPT 1 3/ ) Requires 2.8 psi minimum differential pressure A B C 24/DC 1) 120/ UC 2) 240/ UC 2) C D E X Y Z T C D F L H B C D F G H 1) coil with spade location sidewards 2) coil with rectifier, varistor and spade location on top 26

27 Stainless Steel Solenoid Valve for slightly contaminated and aggressive fluids Normally closed /2-Way, NPT 3 /8 - NPT1, psig Separating diaphragm isolates solenoid from operating fluid Low power consumption (no relay necessary when used with a PLC) Easy Diagnostics 2/2-Way, Servo-Assisted 6212 Modular, low-power, servo-assisted valve system with Burkert s revolutionary Rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to slightly contaminated. Pressure range 1) psig 32 o F o F o F, max. Stainless steel 316L FPM Coil material Polyamide Power consumption DC: 3.4 W UC: 4 W NEMA4 (standard delivery: cable plug cable plug DIN A) B1 Spade location sidewards B Spade location on top Options - Normally open (N.O.) - EPDM seal F F G L L C Variable dimensions [inch] Port Connection Orifice [inch] B1 B2 C F L NPT 3/8 3/ NPT 1/2 3/ NPT 1/2 1/ NPT 3/4 1/ NPT 3/4 3/ NPT 1 3/ with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [oz.] NPT 3/8 3/ NPT 1/2 3/ NPT 1/2 1/ NPT 3/4 1/ NPT 3/4 3/ NPT 1 3/ ) Requires 2.8 psi minimum differential pressure A B C 24/DC 1) 120/ UC 2) 240/ UC 2) S T U W F G A B C E F G J P C E F G 1) coil with spade location sidewards 2) coil with rectifier, varistor and spade location on top 27

28 2/2-Way, Servo-Assisted 5282 Brass Solenoid Valve with Rocker System for slightly contaminated fluids Normally closed /2-Way, NPT 1 /2 - NPT2, psig Extremely long service life Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard Adjustable open-close rate Modular, servo-assisted valve system with Burkert s revolutionary rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to contaminated fluids. Pressure range 1) Coil material Power consumption cable plug psig, max. +32 o F o F +131 o F, max. Brass NBR Epoxy DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug DIN A)) Options - Normally open (N.O.) - Electrical feedback - Impulse coil (zero watt) B A 1.14 Variable dimensions [inch] Port Conn. Orifice A B F E L1 A/F [inch] [inch] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT F L1 D SW (A/F) E with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT ) Requires 2.8 psi minimum differential pressure V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz U R J K L M N P Y Z E T U V W X Y Z A B X L M N

29 Stainless Steel Solenoid Valve with Rocker System for slightly contaminated fluids Normally closed /2-Way, NPT 1 /2 - NPT2, psig High reliability Separating diaphragm isolates solenoid from operating fluid Lockable manual override as standard Adjustable open-close rate 2/2-Way, Servo-Assisted 5282 Modular, servo-assisted valve system with Burkert s revolutionary rocker system completely isolating the pilot from the fluid. The valve is therefore less sensitive to contaminated fluids. Pressure range 1) psig, max. +32 o F o F +131 o F, max. 316 SST, SST FPM Coil material Epoxy Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN A) Options - Normally open (N.O.) - CSA electrical feedback - LED Cable plug - Impulse coil (zero watt) A 1.14 Variable dimensions [inch] Port Conn. Orifice A B F E L1 A/F [inch] [inch] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT B F L1 D SW (A/F) E with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection [Inch] [inch] [PSI] [lb.] NPT 1/2 3/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT ) Requires 2.8 psi minimum differential pressure V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz P Q R J T U Z N P Q R J K L V W T Q R J K L M N

30 2/2-Way, Servo-Assisted 5404 Solenoid Valve for High Pressure to 355 psig Normally closed /2-Way, NPT 1 /2 - NPT1, psig High reliability Uneffected by pressure surges Easy coil change Coil can be locked in 4x90 o positions, or move freely between positions as required Modular, servo-assisted solenoid valve system. Designed specially for high pressure neutral gases and liquis such as compressed air, natural gas, water. Applications: Compressed air pressure systems and gas turbines. Pressure range 1) psig, max. +14 o F o F +131 o F, max. Brass PTFE (O-rings NBR) Coil material Polyamide Power consumption DC: 8 W AC: 21 VA(inrush),12 VA(hold) IP 65 (standard delivery: cable plug cable plug DIN A) D F L.59 A B A/F E B A Variable dimensions [inch] Port Conn. Orifice A B F E L A/F [inch] [inch] NPT 1/2 1/ NPT 3/4 3/ NPT D F L A/F E with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (air) (liquids) [Inch] [inch] [PSI] [PSI] [lb.] NPT 1/2 7/ NPT 3/4 3/ NPT ) Requires 2.8 psi minimum differential pressure V DC 24 V/50-60 Hz 120 V/60 Hz 240 V/60 Hz X Y D S T U V W X Y H A

31 I 150# Angle-Seat Steam Valve Normally closed way angle seat solenoid valve for critical steam applications. The powerful coil attracts the plunger opening a bore in the pre-stroke relieving pressure allowing the valve to be opened fully by the magnetic power. When de-energized, the valve is pushed closed by a spring force aided by the upstream pressure. The coil is situated away from the fluid stream for longer life. 2/2-Way, NPT 3 /8 - NPT1, psig Zero differential pressure Long service life Compact design Excellent temperature control system module 2/2-Way, Angle-Seat 6038 Pressure range psig Port connection NPT 3/8 - NPT o F o F +131 o F, max. Gunmetal Seat material Stainless steel 316 PTFE Plunger seal FPM O-rings FPM Coil material Epoxy Fluids Steam Power consumption AC: 106 VA (inrush) AC: 38 VA / 18 W (hold) IP 65 (standard delivery: cable plug cable plug 2508, DIN A, V) B SW 45 ød A C E H G F Cable plug type 2508 DIN , form A, (0-250 V AC/DC), standard delivery Options - Wide range of cable plugs (see page 81) Variable dimensions [inch] Port C. DN Thread Depth A B E F G H I ø D [inch] C [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] NPT 3/8 7/ NPT 1/2 7/ NPT 1/2 9/ NPT 3/4 9/ NPT 1 9/ with standard-cable plug V AC Port connection [inch] Orifice DN [inch] Cv Response times (opening) (closing) [ms] [ms] Weight [Ib.] 24/DC Voltage / Frequency [V/Hz] 24/ / /50-60 NPT 3/8 NPT 1/2 NPT 1/2 NPT 3/4 NPT 1 7/16 7/16 9/16 9/16 9/ L F G E V R G H P W E M A Q X 31

32 Miniature Brass Solenoid Valve with threaded port connection 3/2-Way, Miniature 6012 When de-energized, outlet port A exhausted /2-Way, NPT 1 /8, psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions as required High-quality FPM seal material standard Modular, direct acting, brass body valve for neutral gases and liquids such as compressed air, water, hydraulic oil. Stainless steel valve version is available for more aggressive media. Suitable for technical vacuum. Pressure range psig, max. +14 o F o F +131 o F, max. Brass FPM Coil material Polyamide Power consumption DC: 4 W AC: 9 VA (inrush), 6 VA (hold) IP 65 (standard delivery: cable plug cable plug DIN C, V) Options - Normally open version - Wide range of cable plug options Type 2506 with LED and varistor (see page 81) - Stainless steel body A A/F with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] Brass version (without manual override) NPT 1/8 3/ NPT 1/8 1/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Brass version (without manual override) E F T Q R J K L 32

33 Compact Solenoid Valve with threaded port connection When de-energized, outlet port A exhausted /2-Way; NPT 1 /8 - NPT 1 /4; psig Coil can be changed easily with valve in place Coil can be locked in 4x90 o positions or move freely between positions as required 3/2-Way, Compact Modular, direct acting solenoid valve system with brass body. Suitable for neutral gases and liquids such as compressed air, natural gas, water, hydraulic oil. Also for technical vacuum. Ideal for reliable actuation of spring return process valves. Pressure range psig, max. +14 o F o F +131 o F, max. Brass FKM Coil material Polyamide Power consumption DC: 8 W AC: 24 VA(inrush),17 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) High-quality FKM seal material standard 6014 Variable dimensions [inch] Without manual override A B C D E F Threaded port NPT-inch 1/ Threaded port NPT-inch 1/ With manual override A B C D E F Threaded port NPT-inch 1/ Threaded port NPT-inch 1/ Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] without manual override NPT 1/8 5/ NPT 1/8 7/ with manual override NPT 1/4 5/ with standard cable plug V AC/DC 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz without manual override A B C D A B C D with manual override CD CD CD CD

34 3/2-Way, Isolating diaphragm 330 Rocker Solenoid Valve with Isolating Diaphragm for neutral fluids When de-energized, outlet port A exhausted When de-energized, outlet port B pressurized 330 3/2-Way, NPT 1 /4, psig Separating diaphragm isolates solenoid system from the operating fluid Extremely long service life, even in non-lubricated fluids Insensitive to slightly contaminated fluids Direct acting valve featuring Burkert s unique pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. This makes it less sensitive to slightly contaminated fluids than a plunger-type system and provides a long service life, even in non-lubricated applications. Pressure range psig, max. +32 o F o F +131 o F, max. Brass FKM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Vacuum service - EPDM seal - Diagnosis: Electrical feedback signaller Impulse coil - Universal function see page 35 with standard cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] Normally closed configuration NPT 1/4 5/ NPT 1/4 1/ Normally open configuration NPT 1/4 5/ NPT 1/4 1/ V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Normally closed configuration G A G L H X B Z Normally open configuration US CD 0473 U G CD F S M CD

35 Solenoid Valve with Isolating Diaphragm; Universal Universal function, any flow direction CSA-Version 330 3/2-Way, NPT 1 /4, psig Universal function Separating diaphragm isolates solenoid system from the operating fluid Insensitive to aggressive, slightly contaminated fluids, de-ionized water 3/2-Way, Isolating diaphragm 330 Direct acting valve featuring Burkert s unique pivoted armature. The unique valve design hermetically isolates the actuator from the fluid. This makes it less sensitive to slightly contaminated fluids than a plunger-type system and provides a long service life, even in non-lubricated applications. Pressure range psig, max. +32 o F o F +131 o F, max. Brass, stainless steel FKM Coil material Epoxy Power consumption DC: 8 W AC: 30 VA(inrush), 15 VA(hold) NEMA 4 (standard delivery: cable plug cable plug DIN 43650A) Options - Vacuum - Impulse coil - Electrical feedback - EPDM seal - Kalrez seal - Buna seal with standard cable plug V AC/DC Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/ NPT 1/4 1/ NPT 1/4 5/ Port Orifice Cv 1) Pressure Range Weight connection (AC) (DC) [Inch] [inch] [PSI] [PSI] [oz.] NPT 1/4 5/ NPT 1/4 1/ NPT 1/4 5/ ) Flow rate reduced 20% with DC-current operation Brass Body 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz E CD P CD US N R CD P T E Y Stainless Steel Body 24 V DC 24 V/60 Hz 120 V/60 Hz 240 V/60 Hz Z CD H CD R Q A CD A US CD CD

36 Solenoid Valve for neutral media and steam up to 356 o F 3/2-Way, Compact Normally closed 355 3/2-Way, NPT 1 /4, psig Fluid temperature up to 356 o F High reliability No danger of erosion or de-zincification, due to stainless steel seat 355 Direct acting solenoid valve for neutral gases and liquids at high temperatures.the brass body with stainless seat allows reliable control of 150# steam, hot water, hot air and thermal oils. Exhaust is though top port. Pressure range Coil material Power consumption psig, max. +14 o F o F (seal NBR) -40 o F o F (seal PTFE) +131 o F, max. Brass, stainless steel NBR, PTFE Epoxy DC: 12 W AC: 40 VA M14x A/F NEMA 4 (standard delivery: cable plug cable plug DIN A) 0.26 A/F 32 Options - DN 5/64 inch (224 psig) - High temperature up to +482 o F NPT 1/ with standard-cable plug V AC/DC Port Orifice Cv Pressure Range Weight connection (AC) (DC) [inch] [inch] [PSI] [PSI] [oz.] NBR-seal NPT 1/4 1/ NPT 1/4 5/ PTFE-seal NPT 1/4 1/ NPT 1/4 5/ Voltage / Frequency [V/Hz] 24/DC 24/60 120/60 240/60 Brass valve body US US US US US US US US Stainless steel valve body US US US US US US US US

37 Mini TOP Control HEAD ON/OFF Control for Pneumatically Actuated Process Valves Customized System Solutions with different process valve types, materials and process connections Easy to install with integrated pilot valves and self-adjusting limit switches Easy LINK with intelligent sensor systems Compact design Easy to commission Easy NET AS-Interface connection According to Burkert s strategy to offer Customized System Solutions at any level of process automation, we have introduced the Mini TOP, a new compact generation of ON/OFF control heads for our process valve systems family bringing all the features of Burkert s Easy concept to smaller sized pneumatic valves. The Mini TOP integrates pilot valves and position feedback in a unique compact design. Thanks to the modularity of Burkert s process valve range, the Mini TOP can be easily plugged onto a wide variety of valves. Both single or double acting actuators are possible. Position feedback can be either achieved by using mechanical or inductive limit switches. Its unique design makes installation and commissioning very simple and results in a lower Total Cost of Ownership. 37

38 Electrically Actuated Ball Valve 2656 NPT 1 /4 - NPT 1 1 /2, Stainless Steel High reliability Insensitive to slightly aggressive and slightly contaminated liquids Compact design Full port, three piece body Modular, three piece, full port stainless steel ball valve with compact, powerful electric rotary actuator for on-off control of slightly aggressive fluids. Ball Valve 2656 Internally the floating ball design reduces torque requirements while stem has been designed to be blow-out proof Technical data (valve body) Stainless Steel Pressure range 0 up to 565 psig Port connections NPT 1/4 - NPT 2 Seats PTFE Fluids Neutral gases and fluids, Ultrapure water, Slightly aggressive fluids, Contaminated liquids Medium temperature +14 F up to +248 F (> +248 F on request) Max. ambient temperature +14 F up to +140 F Options ma position control Technical data (actuator - electric operation) Polycarbonate Rotation 90 ± F up to +122 F Limit switch Changeover switch, single-pole Electrical connection Cable plug for cable ø 6-7 mm acc. to DIN A Rating IP65 Signals Impedance signal input R input: < 50 Ω Accuracy Linearity: < ±1,5 % Hysteresis: < ±1,5 % Flange interface F05 acc. to ISO 5211 Installation as required, preferably with solenoid system upright Actuator Operating voltage Power Torque Duty Full with tolerance ± 10% required cycles rotation time [V] [W] [Nm] [%] [s/90 ] DC DC DC Options (actuator - electric operation) Control signal ma Electronic control signal of drive torque Orifice DN Port conn. Voltage Actuator type Cv Weight [inch] [inch] [oz.] 3/8 NPT 1/4 24 V DC /16 NPT 3/8 24 V DC /16 NPT 1/2 24 V DC /4 NPT 3/4 24 V DC NPT 1 24 V DC /4 NPT 1 1/4 24 V DC /2 NPT 1 1/2 24 V DC L Y U G K Y M 38

39 Electrically Actuated Ball Valve (valve body) (actuator - electric operation) 1.52 G F øc B E Type 1050 DIN A Port connection Flange full reduced ISO 5211 bore bore [inch] [inch] A B ø C NPT 1/4 F NPT 3/8 NPT 1/2 F NPT 1/2 NPT 3/4 F NPT 3/4 NPT 1 F NPT 1 NPT 1 1/4 F NPT 1 1/4 NPT 1 1/2 F NPT 1 1/2 NPT 2 F Materials (valve body) Orifice Port connection Actuator DN Full Reduced bore bore [inch] [inch] [inch] E E* F F* G 3/8 NPT 1/ /16 NPT 3/8 NPT 1/ /16 NPT 1/2 NPT 3/ /4 NPT 3/4 NPT NPT 1 NPT 1 1/ /4 NPT 1 1/4 NPT 1 1/ /2 NPT 1 1/2 NPT E* and F* 4-20mA version Ball Valve DIN specification 1. Body SS End cap SS Seat RPTFE 4. Body gasket PTFE / RPTFE 5. Nut SS Washer SS Bolt SS Packing Set PTFE 9. Bushing PTFE + graphite 10. Gland SS Belleville washer SS Lock saddle SS Stem nut SS Stem SS Ball SS

40 Three Piece Full Port Stainless Actuated Ball Valve 2655 NPT 1 /4 - NPT 1 1 /2, Stainless Steel High reliability Insensitive to slightly aggressive and slightly contaminated liquids Self-adjusting floating ball Direct ISO mount Modular. three piece, full port stainless steel ball valve with compact, powerful pneumatic helical actuator for on-off control of slightly aggressive fluids. Internally the floating ball design reduces torque requirements while the stem has been designed to be blow-out proof Ball Valve 2655 Technical data (valve body) 316 Stainless Steel Pressure range 0 up to 565 psig Port connections NPT 1/4 - NPT 1 1/2 Orifice DN 3/8 - DN 1 1/2 Sealing PTFE Fluids Neutral gases and fluids, Ultrapure water, Slightly aggressive fluids, Contaminated liquids Medium temperature +14 F up to +248 F (> +248 F on request) Max. ambient temperature +14 F up to +140 F Options On-Off Top Control head with integral pilot valve and limit switches Continuous Top Control for position control Technical data (actuator) Polyamide Control function of actuator A: single acting with spring force closed I: double acting no spring Size ø 63 mm - control function I ø 100 mm (G) - control function A and I Control medium Neutral gases and air Control pressure (actuator alone) size ø 63 mm 28 up to 140 psig size ø 100 mm 28 up to 85 psig Rotation 90 ± F up to +140 F Response time 1 up to 3.5 s Control funct. Orifice DN Size. Actuator size Press. range Control press. Cv Weight [mm] [inch] [ø mm] [PSI] [PSI] [oz.] A 3/8 NPT 1/ / A 7/16 NPT 3/ / A 9/16 NPT 1/ / A 3/4 NPT 3/ / A 1 NPT / I 3/8 NPT 1/ / I 7/16 NPT 3/ / I 9/16 NPT 1/ / I 3/4 NPT 3/ / I 1 NPT / I 1 1/4 NPT 1 1/ / I 1 1/2 NPT 1 1/ / J K L M W K U V S P Q R 40

41 Three Piece Full Port Stainless Actuated Ball Valve (valve body) (actuator - pneumatic operation) øg 2.87 øg 2.66 øc F 0.98 F 1.81 B E A Port connection Flange full reduced ISO 5211 bore bore [inch] [inch] A B ø C NPT 1/4 F NPT 3/8 NPT 1/2 F NPT 1/2 NPT 3/4 F NPT 3/4 NPT 1 F NPT 1 NPT 1 1/4 F NPT 1 1/4 NPT 1 1/2 F NPT 1 1/2 NPT 2 F Orifice Port connection Actuator DN Full Reduced bore bore [inch] [inch] [inch] E F G 1/32 NPT 1/4 E (63) /16 NPT 3/8 NPT 1/2 E (63) /16 NPT 1/2 NPT 3/4 E (63) /4 NPT 3/4 NPT 1 E (63) NPT 1 NPT 1 1/4 E (63) /4 NPT 1 1/4 NPT 1 1/2 G (100) /2 NPT 1 1/2 NPT 2 G (100) Ball Valve Materials (valve body) DIN specification 1. Body SS End cap SS Seat RPTFE 4. Body gasket PTFE / RPTFE 8 5. Nut SS Washer SS Bolt SS Packing Set PTFE 9. Bushing PTFE + graphite 10. Gland SS Belleville washer SS Lock saddle SS Stem nut SS Stem SS Ball SS Accessories - Adapter plate for NAMUR pilot valve Pilot solenoid valve 6519 NAMUR see page 57 Description Material for actuator ø 63 mm Polyamide for actuator ø 100 mm Brass for actuator ø 100 mm Stainless St M J G 41

42 Ultra-Compact Angle-Seat Valve for neutral, aggressive fluids and steam up to 356 o F 2/2-Way, NPT 3 /8 - NPT 3 /4, psig Normally closed Normally open 2000 Ultra- Compact Ultra compact: small size, low weight High reliability Waterhammer-free Optical position indication standard 2/2-Way, Angle-Seat The externally piloted angle-seat valve is operated by an ultracompact piston actuator. The angle-seat construction of the body makes possible extremely high flow rates, particularly in comparison to conventional globe valves. Pressure range Actuator housing Control medium Max. permissibile control pressure psig (0-140 psig for steam) +14 o F o F +14 o F o F Bronze, 316SST PTFE Polyamide Neutral gases, air 140 psig Options Pilot Valves - Double-acting actuator with- Direct and quick mounting, out spring return (control please order separately function I) (see page 58-59). H 0.65 G 1/ Variable dimensions [inch] 45 o 2000 Port Conn. Orifice Body A B C G H A/F [inch] [inch] material NPT 3/8 1/2 Bronze NPT 3/8 1/2 St.Steel NPT 1/2 1/2 Bronze NPT 1/2 1/2 St.Steel NPT 3/4 3/4 Bronze NPT 3/4 3/4 St.Steel A/F G A C ø D B Port C. Orifice Cv Max. operating Minimum required Actuator Flow Control pressure control pressure Size direction function [inch] [inch] [PSI] [PSI] [øinch] NPT 3/8 1/ ) above seat NPT 1/2 1/ ) above seat normally NPT 3/4 3/ ) above seat closed NPT 3/8 1/ ) below seat 2) NPT 1/2 1/ ) below seat 2) normally NPT 3/4 3/ below seat 2) closed NPT 3/8 1/ ) below seat 2) NPT 1/2 1/ ) below seat 2) normally NPT 3/4 3/ ) below seat 2) open 1) Max. operating pressure with steam o F 2) Waterhammer-free Item-No. Valve body material Bronze St.Steel J D X Y Z S P E N P Q R C F Q R M J 42

43 Intelligent Valve Systems for Process Control Decentralized Intelligence : Integrated PID-Controller with internal + external setpoint Commissioning: Programmable flow curveslinear, equal percentage, freely. 3 different input signals: frequency, PT100, 4-20 ma Networking: with multipin and fieldbus connections (ASi, Profibus, DeviceNet) 43

44 Angle-Seat Valve - Waterhammer-free for liquid applications 2/2-Way, NPT 1 /2 - NPT2 1 /2, psig 50% more economical than ball valves Fit & Forget Service Life Normally closed 2000 Waterhammer-free Compact design with high flow rates 2/2-Way, Angle-Seat 2000 Angle seat valve with life-loaded self-adjusting packing, N-seal and intermediate relief and wiper system. Burkert s angle-seat construction of the body exhibits extremely high flow rates and unmatched cycle life. Pressure range Threaded connection Actuator housing Control medium Options - Normally open - Double-acting - Weld-end connection (SST version only) - TriClamp connection (SST version only) - Electrical position feedback - Independently adjustable stroke limitor: for high and low flow - Manual override - NAMUR-adapter for pilot valve mounting - Continuous control see page 50 - High ambient temp. actuator Pilot Valves Direct and quick mounting with Banjo and NAMUR valves, please order separately (see page 57-59) psig +14 o F o F +14 o F o F Bronze, 316SST NPT PTFE Polyamide Neutral gases, air 0.85 G1/4 H ø D A/F C A B Variable dimensions [inch] 45 Flow direction F ø E Port Conn. DN Actuator A B C E F H A/F [inch] [inch] size [øinch] NPT 1/2 1/ NPT 3/4 3/ NPT NPT 1 1/4 1 1/ NPT 1 1/2 1 1/ NPT NPT 2 1/2 2 1/ Port Orifice Cv Max. operating Minimum required Actuator Flow Control Connection pressure control pressure Size direction function [Inch] [inch] [PSI] [PSI] [øinch] NPT 1/2 1/ below seat NPT 3/4 3/ below seat NPT below seat normally NPT 1 1/4 1 1/ below seat closed NPT 1 1/2 1 1/ below seat NPT below seat NPT 2 1/2 2 1/ below seat Item-No. Valve body material Bronze St.Steel F D G A H X A Y Z A U G V T 44