Fluid Control System with Quarter-Turn Ball Valve for normal, aggressive and ultra-pure fluids. TOP Control System 265X

Size: px
Start display at page:

Download "Fluid Control System with Quarter-Turn Ball Valve for normal, aggressive and ultra-pure fluids. TOP Control System 265X"

Transcription

1 TOP Control System 65X /-Way; DN mm; Plastic or Stainless Steel dvantages/benefits Decentralized ntelligence for ON/OFF control of processes Customized Fluid Control Systems for Easy LNK and Easy NETWORKNG together with sensors Up to 80% lower Total Cost of Ownership ntrinsically safe version according to TEX (ON/OFF) Design/Function pplications The ball valve system is designed for ON/OFF controlled process applications with various communication possibilities with sensors and a PLC. The ball valve system consists of three variable modules, the valve body, the pneumatic actuator and the TOP Control. Fluids Gases and liquids up to 6 bar Ultra-pure water Slightly contaminated fluids Function ON/OFF control version: Type 86 ON/OFF control of a quarter-turn ball valve ntegrated pilots for single acting or double acting versions ntegrated mechanical or inductive limit switches Position feedback Modular electrical interfaces S-i bus communications ndustries Chemical process engineering Food and feed processing Machine industry Shut-off armatures in textile dyeing and bleaching Water treatment Cleaning machines Drinking water distribution Stow processes / tank forming in beverage and pharmaceutical industry Fluid Control Solutions

2 Fluid n optional Control System variety with Quarter-Turn of modules Ball Valve for your choice ctuator ctuator sizes : ø ø 00.0 Materials: P with SS thread connections Circuit functions: Single acting - normally closed by spring return Double acting C O N T R O L On/Off Power supply: V/DC V/-wire bus 0 V/50 Hz 0 V/50 Hz V/DC EEx-ia Valve Bodies / way Stainless Steel Materials and connections: -piece (full bore) -piece (full and reduced bore) Stainless Steel: G, NPT & Rc Valve sizes ø 0.0 ø.0 ø 5.0 ø 0.0 ø 5.0 ø.0 ø ø * *only for -piece Plastic Materials and connections: -piece : true union (acc. to DN / SO) (acc. to NS) (acc. to JS) : weld ends : weld ends Valve sizes ø 0.0 ø 5.0 ø 0.0 ø 5.0 ø.0 ø ø ø 65.0 ø 80.0

3 TOP Control System 65X ON/OFF Control Control HED 86 ON/OFF Signal Outputs Electrical nterfaces Pneumatic connect.: G / / NPT Rc / Materials: Lower cap - black Noryl (E/P) NBR sealing Upper cap - transp. PSU (Ultrason S) Upper cab - black Noryl (E/P) ntegrated pilot valve: /-way (single acting) 5/-way (double acting) Limit switches (0, or ): Mechanical nductive Position feedback S-i bus PG cable glands EaseOn box Multipole (S-i bus) Cable end with S-i clip ON/OFF Control

4 Fluid ON/OFF Control Control System with Quarter-Turn Ball Valve ctuator Configuration Electrical nterfaces ntegrated pilot valve Functions: Single acting (NC by spring return): / way Double acting: 5/ way Multipole Communication Line Power consumption: M S-i plug ( pins) Blind plate < W Power supply: V/DC ± 0% (no technical direct voltage) Residual ripple 0% 0 V/50 Hz 0 V/50 Hz V/DC EEx-ia PG Cable gland Round cable with S-i clip Blind plate Command Line ON/OFF PG cable glands (wiring on terminal strip) Command line (Power supply) Limit switches Pneumatic connections Supply port: G / / NPT Rc / Pneumatic data Service port: G /8 (pre-mounted) Exhaust port: G / / NPT Rc / EaseOn box (wiring by push-in and turn-off) Outputs Medium: Pressure range: QNn-value: nstrument air (filtered, non-lubricated)...7 bar 00 l/min. Command line Power supply Limit switches Operation data Rating: mbient temp.: P C

5 TOP Control System 65X Communication S-i bus Wiring: -wire S-i cable for ON/OFF command, position feedback and power supply 0 V PLC with S-interface PLC S Topology of network Line Tree Star Ring Easy LNK Sensor switch or relay output Easy LNK with Sensor (control) Flow Control (dosing / batching / filling) nalytical Control (dosing) Easy NETWORKNG PLC Pressure Control (stabilizing pressure range) Level Control (filling / stabilizing / discharging & overfill protection) PLC Temperature Control (stabilizing temperature range) for details, please see corresponding data sheets Position feedback Limit switch(es): nductive ( V/DC) - Upper / Lower (NO), binary output 0/ V Mechanical ( V/DC, 5 ) - Upper / Lower (NO), 0/ V - Upper / Lower (NC), /0 V (0 and 0 V/50 Hz, 5 ) - Upper / Lower (NO), 0/0 or 0 V - Upper / Lower (NC), 0 or 0/0 V 0, or Upper position and / or Lower position PLC PLC 0 Counter coustic alarm Visual alarm

6 TOP Control System 65X Type 65/55 stainless steel Technical data Circuit functions / way valve normally closed by spring return Specifications P / way valve with double-acting actuator Control Orifice Port ctuator Pressure Control Kv-value Weight function DN connection size range pressure Full Reduced Full Reduced G/NPT/Rc min / max bore bore bore bore [inch] [ø mm] [bar] [bar] [m /h] [kg] P -piece ball valve type / 0-6 / / / /8 0-6 / / / / 0-0 / / / / / / / 0-6 / /8 0-6 / / 0-0 / / / / 0-0 / / / / / / / / / / piece ball valve type / 0-6 / / / /8 0-6 / / / / 0-6 / / / / 0-0 / / / / 0-0 / / / / / / / / / / 0-6 / / 0-6 / / 0-6 / / 0-0 / / / / 0-0 / / / / 0-0 / / / / / / / / 0-6 / / / / / / / / / / Technical data (valve bodies) -piece stainless steel body version robust and economic blow-out proof stem design less changes of temperature and pressure low cycling rates -piece stainless steel body version rugged industrial design control section "swing away" and seats to be changed, while keeping the valve on the pipe bottom entry stem prevents blow-out self-adjusting floating ball encapsulated body gasket seals off any possible leak path

7 TOP Control System 65X Type 65/55 stainless steel Operating data (valve bodies) Pressure range 0 up to 6 bar Sealing PTFE Port connections G / - G / NPT - NPT Rc / - Rc Fluids Neutral gases and fluids Ultrapure water Slightly aggressive fluids Orifice -piece version DN 0 - DN 50 -piece version DN 0 - DN 0 Viscosity max. 0 mm /s Medium temperature -0 up to +0 C (>0 C on request) Max. ambient temperature -0 up to +60 C Electrical data (S-i version) Electrical connection Power supply M S-i round plug cable end with S-i clip 9.5 up to.6 V/DC Outputs Max. rupturing capacity W above S-interface integrated watchdog function Max. current 0 m Materials (valve bodies) -piece body version -piece body version DN specification STM/SUS specification. Body SS.0 STM 5 Grade CF8M. End cap SS.0 STM 5 Grade CF8M. Seat RPTFE RPTFE. Body gasket PTFE / RPTFE PTFE / RPTFE 5. Nut SS.0 SUS0 6. Washer SS.0 SUS0 7. Bolt SS.0 SUS0 8. Packing Set PTFE PTFE DN specification STM/SUS specification 9. Bushing PTFE + graphite PTFE + graphite 0. Gland SS.0 SUS0. Belleville washer SS.0 SUS0. Lock saddle SS.0 SUS0. Stem nut SS.0 SUS0. Stem SS.0 SUS6 5. Ball SS.0 SUS6 6. Thrust washer PTFE PTFE

8 TOP Control System 65X Type 65/55 stainless steel Dimensions -piece body version type 65 Orifice Port connection Measurements ø 0 DN G, NPT and Rc ø D B C ctuator E ctuator ctuator F ctuator size ø 00 size ø 6 size ø 00 size ø 6 [inch] E 7 F / /8 / / / / B ø C ø D DN XX PN XXX -piece body version type 655 Orifice Port connection Measurements ø 0 DN G, NPT and Rc full bore reduced bore ø D B ctuator E ctuator ctuator F ctuator size ø 00 size ø 6 size ø 00 size ø 6 [inch] [inch] 7 F / /8 / / / / / / / / B E ø D DN XX PN XXX

9 TOP Control System 65X Type 658 plastic Technical data Circuit functions / way valve normally closed by spring return Specifications Control function Orifice DN Port connection [inch] ctuator size [ø mm] P Control pressure min. / max. [bar] / way valve with double-acting actuator Kv-value [m /h] body body body Pressure range [bar] Weight [kg] Pressure range [bar] Weight [kg] Pressure range [bar] Weight [kg] P -piece ball valve type /8 /8 / / / / / / /8 / / / / / /0 / 6 /0 / 6 /0 / 6 /0 / 6 / 6 / 6 / 6 /0 /0 /0 /0 /0 /0 /0 / 6 / 6 / Technical data (valve body) -piece thermoplastic body version independent of flow direction ideal flow characteristics due to full bore maintenance-free due to floating ball and double stem sealing Operating data (valve bodies) long service life through ball seating joints made of PTFE low weight double sided fixed ball against flow-out radial installation and removal Electrical data (S version) Pressure range 0 up to 6 bar Port connections True union Weld ends Weld ends Orifice DN 0 - DN 80 Sealing PTFE Fluids Neutral gases and fluids Ultrapure water Highly aggressive fluids Slightly contaminated fluids Viscosity max. 0 mm /s Medium temperature 0 up to +60 C 0 up to +80 C 0 up to +0 C Max. ambient temperature 0 up to +60 C Electrical connection Power supply Max. current Outputs Max. rupturing capacity M S-i round plug cable end with S-i clip 9.5 up to.6 V/DC 0 m W above S-interface integrated watchdog function

10 TOP Control System 65X Type 658 plastic Operating data (valve bodies) Operating pressure depending on fluid temperature and body material: body body body Operating pressure [bar] PN 6 PN Temperature [ C] Operating pressure [bar] PN 6 PN Temperature [ C] Operating pressure [bar] PN 0 PN Temperature [ C] Materials (valve bodies) -piece body version body body body. Stem. Ball. Set of gasket PTFE PTFE PTFE. Coupler ø 0 DN SO d STM JS Measurements B ct. D E H Size View F B Dimensions -piece body version type 658 D 7 E Orifice DN Port conn. [inch] /8 / / / / / / / F H ø DN d

11 TOP Control System 65X Fax order form: ndividual system configurations Part of Please select modules according specific application: General data Configuration number: Quantity: Medium data Medium: Temperature: Pressure: Min. / Max. ON/OFF control General data Command line coming from: PLC Sensor Relay/Switch Cap material Upper cap: Transparent Black ctuator Circuit function: Single acting (NC) Single acting (NO) Double acting Control HED 86 No Bus or with Bus Communication: Power supply: Electrical connection: Limit switches: Pneumatic connection: V/DC 0V/C 0V/C V/DC EEx-ia PG cable glands EaseOn box 0 Mechanical nductive (only for V/DC version) Stainless Steel G NPT Rc S-i bus PG cable glands (with round cable end) Multipole 0 Stainless Steel G NPT Rc Valve body Material: Orifice (versions): Connection: Material: Orifice (versions): Type: tem-no: (reference) Stainless Steel see right table G threaded NPT threaded Rc threaded Butt weld Socket weld Plastic see right table 65 (-piece) 655 (-piece) 658 (-piece)... body versions body versions piece body DN 0 /" /8" 5 /" 0 /" 5 " /" 0 /" 50 " true union DN 0 /8" 5 /" 0 /" 5 " /" 0 /" 50 " 65 /" 80 " 80 " piece body full bore DN 0 /" /8" 5 /" 0 /" 5 " /" 0 /" 50 weld-end DN 0 /8" 5 /" 0 /" 5 " /" 0 /" 50 " 65 /" 80 " 80 " piece body reduced bore DN 0 /" 5 /" 0 " 5 /" /" 0 " 50 weld-end DN 0 /8" 5 /" 0 /" 5 " /" 0 /" 50 " 65 /" 80 " 80 "

12 TOP Control System 65X Fax order form Part of Customer data Name of company: Department: Street / No.: City: Postal code: Country: Name of contact person: Name: First name: Telephone number: Telefax number: Signature: to order Thank you very much for filling in our fax order form. Please send part and of this order to your specific Burkert company by fax. f you have any questions concerning this matter, please do not hesitate to contact us. n case of special requirements please consult for advice. We reserve the right to make technical changes without notice. 90-GB/ -088

Function Continuous control version: Type 8630 Position control or process control with an integrated PID controller

Function Continuous control version: Type 8630 Position control or process control with an integrated PID controller TopControl System 23/3 2/2-Way, DN 5...5 mm dvantages/benefits Decentralized Intelligence for On/Off and Continuous control of processes Customized System Solutions for Easy Link and Easy Networking together

More information

Fluid Control System with Diaphragm Valve For Polluted, Dirty, Aggressive and Ultra-Pure Fluids

Fluid Control System with Diaphragm Valve For Polluted, Dirty, Aggressive and Ultra-Pure Fluids TOP Control System / ON/OFF and Proportional /-Way, / Advantages/Benefits Decentralized Intelligence for ON/OFF and Proportional control of processes Customized System Solutions for Easy LINK and Easy

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Type Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits

Type Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits 2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above

More information

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory

More information

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections /-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation

More information

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle

More information

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design

More information

Centralized Process Actuation Solution for the Processing Industries

Centralized Process Actuation Solution for the Processing Industries Centralized Process Actuation Solution / High Flow ALUMINUM Valves Easy NET with wide range of connections Optimized System Solutions due to high level modularity Circuit functions H, L and N High flow

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control

Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control INLINE Quarter-Turn ON/OFF Control System for Monitoring and Switching Mechanical adjustment of set point No contact to Fluid thanks to INLINE

More information

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero

More information

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

More information

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules. / and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with

More information

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series

More information

PROCESS & AUTOMATED VALVES

PROCESS & AUTOMATED VALVES Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline

More information

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure

More information

2/2-way Globe Control Valve, threaded port connection, DN 10-65

2/2-way Globe Control Valve, threaded port connection, DN 10-65 2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic

More information

Ball Valves in cast 316 SS multi-port, bolted construction

Ball Valves in cast 316 SS multi-port, bolted construction 65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options

More information

2/2 Pressure operated valves

2/2 Pressure operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54

More information

Pneumatic control unit for decentralized automation of ELEMENT process valves

Pneumatic control unit for decentralized automation of ELEMENT process valves 890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing

More information

Angle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system

Angle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Angle-Seat Valve System for on/off control Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8801/2100 + = Type 2100 angle-seat series

More information

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level

More information

display on the wall or in a panel away from the inline sensor SE30 for easy meter reading.

display on the wall or in a panel away from the inline sensor SE30 for easy meter reading. Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180 SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body

More information

STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE

STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

Ball Valves & Accessories

Ball Valves & Accessories Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with

More information

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:

More information

Motorized Rotary Actuator Type 3001

Motorized Rotary Actuator Type 3001 Motorized Rotary ctuator Type 00 dvantages/benefits 5 m nominal torque Open/closed with choice of rotation speeds Flange interface ISO 5 IP 65 rating orrosion resistant vailable with manual override Optical

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position

More information

FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC

FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation

More information

2/2 way Angle-Seat Valve for medium up to C, DN15-50

2/2 way Angle-Seat Valve for medium up to C, DN15-50 Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves

More information

TopControl Continuous

TopControl Continuous 860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat

More information

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm). /2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and

More information

2/2 way Globe Control Valve, threaded connection, 3/8" 3"

2/2 way Globe Control Valve, threaded connection, 3/8 3 2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

3/2-Way Valve DN 15 up to DN 40

3/2-Way Valve DN 15 up to DN 40 3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly

More information

Pneumatic operated 2/2-way Diaphragm Valve

Pneumatic operated 2/2-way Diaphragm Valve Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical

More information

2/2-way Solenoid Valve with servo diaphragm

2/2-way Solenoid Valve with servo diaphragm 2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

KP-28 & KT-28 Two Way Control Valve

KP-28 & KT-28 Two Way Control Valve CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.

More information

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100 2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism

More information

Pneumatically operated zero dead volume T-Valve CLASSIC

Pneumatically operated zero dead volume T-Valve CLASSIC Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular

More information

The manifolds can be powered through various fieldbus systems, multipole or common terminals.

The manifolds can be powered through various fieldbus systems, multipole or common terminals. Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level

More information

Flow Controller, flow control system for gases

Flow Controller, flow control system for gases Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined

More information

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Globe Valve System for continuous control Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8802/2301 + = Type 2301 Series Globe valve Type

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

3/2-Way Valve DN 15 up to DN 50

3/2-Way Valve DN 15 up to DN 50 /-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated

More information

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref:

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref: ZEUS type BRONZE PNEUMATIC ACTUATED VALVE Model/Ref: 1422203 www.lauridsenindustri.com CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework.

More information

3/2-Way Valve DN 15 up to DN 50

3/2-Way Valve DN 15 up to DN 50 /-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic

More information

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL. CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can

More information

505F Multi-Port Ball Valve

505F Multi-Port Ball Valve 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way

More information

BRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE

BRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.

More information

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these

More information

2/2 or 3/2 way direct acting rocker solenoid valve

2/2 or 3/2 way direct acting rocker solenoid valve 2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal

More information

Materials : Stainless Steel

Materials : Stainless Steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing

More information

Y-Pattern Valve for Proportional Control Type 2632

Y-Pattern Valve for Proportional Control Type 2632 Stainless Steel, /"-" Advantages / Benefits Ultra compact design - Low weight Automatic self-adjustment of basic parameters Integrated PID controller User-friendly operation - LCD display - Keypad interface

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems 66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request

More information

INSERTION flow sensor for continuous flow measurement

INSERTION flow sensor for continuous flow measurement INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)

More information

Burkert: The Global Supplier of Customized Fluid Control Solutions

Burkert: The Global Supplier of Customized Fluid Control Solutions Burkert: The Global Supplier of Customized Fluid Control Solutions With unmatched Reduction of Total Cost of Ownership Innovative LINK and NET Technology 50 subsidiaries worldwide What is it that makes

More information

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing

PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking

More information

INSTALLATION & MAINTENANCE MANUAL

INSTALLATION & MAINTENANCE MANUAL INSTALLATION & MAINTENANCE MANUAL 3-WAY/4-WAY/5-WAY MULTI-PORT BALL VALVES T TEFLON PARTS - 1. Seat x 5 pcs. 2. Joint Gasket x 5 pcs. 3. Retainer Seal x 5 pcs. 4. Thrust Washer x 1 pc. 5. O-Ring x 1 pc

More information

R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition

R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,

More information

Contents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18

Contents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18 Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm 2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions

More information

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent

More information

MCF BALL VALVES OVERVIEW

MCF BALL VALVES OVERVIEW MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,

More information

PF6 Stainless Steel Piston Actuated On/Off Valves

PF6 Stainless Steel Piston Actuated On/Off Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200

Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200 carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.

More information

2/2 and 3/2-way ball valve with pneumatic rotary actuator

2/2 and 3/2-way ball valve with pneumatic rotary actuator 2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

Special valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.

Special valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65. Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx

More information

Two-Way Soft Seated Ball Valve Type 75-S

Two-Way Soft Seated Ball Valve Type 75-S Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,

More information

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

More information

AirLINE and AirLINE Quick electrical/pneumatic Automation System

AirLINE and AirLINE Quick electrical/pneumatic Automation System AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility

More information

GRUNDFOS PRODUCT GUIDE DMH. Dosing pumps

GRUNDFOS PRODUCT GUIDE DMH. Dosing pumps GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional

More information

2/2 way Globe Control Valve, flange connection, 1/2" 4"

2/2 way Globe Control Valve, flange connection, 1/2 4 2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

Flow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body

Flow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Insertion magnetic inductive flowmeter

Insertion magnetic inductive flowmeter Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041

More information

Series 35 Direct Mount 3-Piece Full Port Ball Valves

Series 35 Direct Mount 3-Piece Full Port Ball Valves Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

More information

2/2 or 3/2 way ball valve with pneumatic rotary actuator

2/2 or 3/2 way ball valve with pneumatic rotary actuator 2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

PF6 Stainless Steel Piston Actuated On/ Off Valves

PF6 Stainless Steel Piston Actuated On/ Off Valves Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil

More information

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems 66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information