Электромагнитные клапаны для пара Burkert

Size: px

Start display at page:

Download "Электромагнитные клапаны для пара Burkert"

Shavonne Houston
5 years ago
Views:

1 По вопросам продаж и поддержки обращайтесь: Архангельск (8182) Астана (7172) Белгород (4722) Брянск (4832) Владивосток (423) Волгоград (844) Вологда (8172) Воронеж (473) Екатеринбург (343) Иваново (4932) Ижевск (3412) Казань (843) Калининград (4012) Калуга (4842) Кемерово (3842) Киров (8332) Краснодар (861) Красноярск (391) Курск (4712) Липецк (4742) Магнитогорск (3519) Москва (495) Мурманск (8152) Набережные Челны (8552) Нижний Новгород (831) Новокузнецк (3843) Новосибирск (383) Орел (4862) Оренбург (3532) Пенза (8412) Пермь (342) Ростов на Дону (863) Рязань (4912) Самара (846) Санкт Петербург (812) Саратов (845) Смоленск (4812) Сочи (862) Ставрополь (8652) Тверь (4822) Томск (3822) Тула (4872) Тюмень (3452) Ульяновск (8422) Уфа (347) Челябинск (351) Череповец (8202) Ярославль (4852) Единый адрес: Веб сайт: Электромагнитные клапаны для пара Burkert

0355 3/2-way Solenoid Valve for high temperatures, G 1/4 Seat valve direct acting Media temperature up to +180 C Push-over solenoid system For gases and fluids Type 0355 can be combined with.

Also suitable for high temperatures, such as hot water, hot air, steam. Technical data Orifice DN 2.0-4.0 Body materials with stainless steel seat 1.4305, Stainless steel 1.

2 0355 3/2-way Solenoid Valve for high temperatures, G 1/4 Seat valve direct acting Media temperature up to +180 C Push-over solenoid system For gases and fluids Type 0355 can be combined with... Type 2508 Cable plug Type 1078 Timer unit Type 2511 ASI cable plug Direct-acting plunger solenoid Type 355 for neutral gases and liquids. Also suitable for high temperatures, such as hot water, hot air, steam. Technical data Orifice DN Body materials with stainless steel seat , Stainless steel Coil material Epoxy Coil insulation class H Inner part of valve Stainless steel Seal material NBR, FKM,, EPDM Media NBR EPDM FKM Media temperature NBR EPDM FKM Neutral fl uids, hydraulic oil, oil without additives Oil and fat-free fl uids Per-solutions, hot oils with additives Steam, organic solvents -10 to + 90 C -40 to +130 C 0 to +130 C -40 to +180 C Ambient temperature Max. +55 C Voltage tolerance ±10% Duty cycle 100% continuous rating Electrical connection Tag connector acc. to DIN EN Form A (previously DIN 43650) for cable plug Type 2508 (supplied as standard) Protection class IP 65 with cable plug Installation As required, preferably with actuator upright Power consumption Inrush Hold (hot coil) AC [VA] AC [VA/W] DC [W] /10 ca. 12 p. 1/3

3 0355 Materials Stopper: Locknut: Coil: Steel (thick-film passivated acc. Rohs) Epoxy Valve Seat: Shading ring: Copper (MS version), only AC Silver (SS version), only AC Seal: EPDM, NBR,, FKM Spring: Plunger: Seal: EPDM, NBR,, FKM Valve Seat: Body: or stainless steel Ordering chart for valves (other versions on request) or stainless steel body, all valves with cable plug Circuit function Port connection Orifice Kv value water [m 3 /h] Pressure range [bar] Seal material Item no. per voltage/frequency [V/Hz] 024/DC 024/50 230/50 C 3/2-way, valve NC 2 (A) 1(P)3 (R) body G 1/ EPDM NBR FKM NBR FKM NBR Stainless steel body G 1/ FKM Valves with brass body have a pressed in stainless steel seat Circuit function Circuit functions D and E on request Material Further valve combinations (body and seal material) Voltage 110/50, 240/50, non-standard voltages Approvals UL, UR, CSA p. 2/3

4 0355 Dimensions Body: or stainless steel To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice. Subject to alteration. Christian Bürkert GmbH & Co. KG 0810/2_EU-en_ p. 3/3

2610 2/2-way Solenoid Valve for low and high temperatures Medium separation Metal bellow system in stainless steel High quality seat seal Medium temperature -200 C +180 C Energy saving "Kick and

5 2610 2/2-way Solenoid Valve for low and high temperatures Medium separation Metal bellow system in stainless steel High quality seat seal Medium temperature -200 C +180 C Energy saving "Kick and Drop" electronic The direct-acting valve Type 2610 is delivered with circuit function normally closed. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop" electronic that supports the opening phase and afterwards reduction of the opening holding power. Circuit function A Servo-assisted 2/2-way valve, direct acting, normally closed. Technical data Body material with stainless steel seat Stainless steel body and stainless steel seat Metal bellows Stainless steel Seal material Medium Neutral gases and liquids Medium temperature -200 to +180 C Ambient temperature Max. +50 C Viscosity Approx 21 mm 2 /s Operating voltages 24/110 VUC VUC Voltage tolerance Max. ±10% Cycling rate 10/min Power consumption Kick and Drop electronic 72/4 W Duty cycle Continuous operation 100% ED Electrical connection Cable plug for Ø 7 mm cable (included in delivery) Protection class IP65 with cable plug Installation position As required, preferably with actuator upright Weight 1.1 kg

6 2610 Other technical data Orifice Kv value Port Pressure Power consumption Response times water [m 3 /h] connection range [bar] Inrush [W] Operation [W] Opening [ms] Closing [ms] G 1/4, NPT 1/ to to G 1/2, NPT 1/ G 1/2, NPT 1/ Flowrate: Kv value water [m 3 /h] Measured at +20 C, 1 bar pressure at valve inlet and free outlet Pressure values [bar] Overpressure with respect to atmospheric pressure Response times [ms] Opening Closing Measured at valve outlet at 6 bar and +20 C Pressure rise 0 to 90%, Pressure drop 100 to 10% Dimensions B ) For G-Thread the dimensions F1 and G1 apply for NPT-Thread the dimensions F2 and G2 apply F 74.5 F G SW Body with threaded port, G 1/2 Body with threaded port, G 1/4 DN B F1 1) G1 1) F2 1) G2 1) SW G 1/ NPT 1/ G 1/ NPT 1/ G 1/ NPT 1/2 27 p. 2/3

7 2610 Ordering chart (other versions on request) All valves with seal and stainless steel body Circuit function Orifice Port connection Kvs value [m³/h] Pressure range [bar] Voltage / frequency Item no. A 6.0 G 1/ UC A 6.0 NPT 1/ UC A 6.0 G 1/ UC A 6.0 NPT 1/ UC A 6.0 G 1/ UC A 6.0 NPT 1/ UC A 8.0 G 1/ UC A 8.0 NPT 1/ UC A 8.0 G 1/ UC A 8.0 NPT 1/ UC A 8.0 G 1/ UC A 8.0 NPT 1/ UC A 12.0 G 1/ UC A 12.0 NPT 1/ UC A 12.0 G 1/ UC A 12.0 NPT 1/ UC A 12.0 G 1/ UC A 12.0 NPT 1/ UC on request Accessories Description Mounting bracket with 2 stainless steel screws Item no. To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice. Subject to alteration. Christian Bürkert GmbH & Co. KG 1401/1_EU-en_ p. 3/3

0406 2/2-way-Solenoid Valve for neutral media up to +180 C, G 1/2 - G 1 Solenoid valve with servo-piston Temperatures up to + 180 C For neutral media, incl.

.. Threaded and flange valve bodies Type 2508 Type 1078 Type 2511 Cable plug Timer unit ASI cable plug Type 0406 is a pilot controlled solenoid valve with servo-piston and is suitable for media up to

8 0406 2/2-way-Solenoid Valve for neutral media up to +180 C, G 1/2 - G 1 Solenoid valve with servo-piston Temperatures up to C For neutral media, incl. steam Push-over coil system Type 0406 can be combined with... Threaded and flange valve bodies Type 2508 Type 1078 Type 2511 Cable plug Timer unit ASI cable plug Type 0406 is a pilot controlled solenoid valve with servo-piston and is suitable for media up to +180 C. A minimum differential pressure of 1 bar is required to fully open the valve. The valve is closed by its own media pressure and spring force without power supply. Technical data Orifice DN Body material, grey cast iron Coil material Epoxy Coil insulation class H Seal material /graphite Media Neutral media such as hot water and steam Media temperature -10 to +180 C Ambient temperature max. +55 C Viscosity max. 21 mm2/s Voltage tolerance ±10% Duty cycle 100% continuous rating Electrical connection Cable plug for Ø 7 mm cable, acc. to DIN EN Form A (supplied as standard) Protection class IP 65 with cable plug Installation As required, preferably with actuator upright Power consumption Orifice Inrush Hold (hot coil) DN AC [VA] AC [VA/W] / /12 DC [W] p. /2

9 0406 Ordering chart for valves (other versions on request) All valves with and graphite-seal, with cable plug (exception see footnote) G 3/4 20 G1 25 Flange acc. to DIN / /50 Kv-value water [m3/h] /DC Orifice G 1/2 Body material Port connection A 2/2-way-valve NC Pressure range [bar] Circuit function Item no. per voltage/frequency [V/Hz] GG GG Flange version with Item-no (024/DC) supplied without cable plug. i Further versions on request Voltage 110/50, non-standard voltages Approvals UL, UR, CSA Dimensions DN D B E F G H J L 13 G 1/ G 3/ G Flange To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice. We reserve the right to make technical changes without notice. Christian Bürkert GmbH & Co. KG 0801/1_EU-en_ p. /2

Depending on the version, these valves can be used either as feed line, return line or circulation valves.

10 6027 Safety Shut-Off Valve/Oil 2/2-way Solenoid Valve safety shut off valve for oil burner NC-valves, approved acc. to DIN EN ISO Medium: liquid fuels Easy servicing due to modular coil system Feed line, return line or circulations valve IP65 Type 6027 are direct acting solenoid valves. Depending on the version, these valves can be used either as feed line, return line or circulation valves. The valves fulfill the requirements of a safety shut off valve according to DIN EN ISO It is approved by TÜV-Süd and certified by DIN Certco. The universal coil system reduces logistics and service expenses. Circuit function A (NC) Circuit function B (NO) 2/2-Wege-Ventil, NC 2/2-Wege-Ventil, NO Technical Data Medium Heating oil (EL, L, M, S) acc. to DIN part 16 Shipping fuels acc. to ISO 8217 Fatty Acid Methyl Esters (FAME) acc. to DIN EN Rapeseed oil acc. to DIN V Viscosity 1,676 cst (DN2,2 NC 1,622 cst) Medium temperature 070 C (coil insulation class B), only DN2,2 NC 0160 C (coil insulation class H) Ambient temperature 15 to +60 C Orifice DN2.2, 3.0, 3.5, 10 Body material Seal material Seat external Coil material FKM Insulation class B: Polyamide, only DN2,2 NC Insulation class H: Epoxy Port connection G 1/8, G 1/4, G 3/8, G 1/2 Protection class IP65 Voltages V/50HZ, V/50 Hz, others on request Duty cycle Continuous operation 100% ED Electrical connection Installation Acc. to DIN EN Form A as required, preferably with actuator upright DIN Certco registration DN Reg. No 2.2 (NO) 5S (NC) 5S (NC) 5S (NC) 5S (NC) 5S255 p. 1/5

11 6027 Safety Shut-Off Valve/Oil Technical Data Circuit function Port connection Orifice Kv value water Pressure range Medium temperature Closing time Coil material Application Power consumption [m 3 /h] [bar] C [ms] Operation W NC (A) G1/ Polyamide Feed line valve * Epoxy Feed line valve G1/ * G1/ Epoxy Feed line valve Return line valve Inrush VA G1/ Epoxy Feed line valve Return line valve G3/ * Epoxy Return line valve G1/ * Epoxy Return line valve NO (B) G1/8, G1/ Epoxy Circulation valve * max. static pressure Feed line/return line valve combinations For oil burner with feed line valve and return line valve the following safety shut off valves combinations are available. Feed line valve Return line valve Type Orifice body material Kv value water Type Orifice body material Kv value water [m 3 /h] [m 3 /h] * * 20 Stainless steel ** 20 Stainless steel 4.7 * compare datasheet Type 5406 Safety Shut Off-Valve/Oil ** compare datasheet Type 5407 Safety Shut Off-Valve/Oil Materials Version DN2,2 NC Coil Polyamide or Epoxy (see table) Stopper Spring Plunger Seat seal Seal ring Valve body Strainer FKM Stainless steel p. 2/5

12 6027 Safety Shut-Off Valve/Oil Materials Version DN3/3.5/10 NC Coil Epoxy Stopper Spring Plunger Spring Seat seal Seal ring Strainer Valve body FKM Stainless steel only DN3 and 3,5 Materials Version DN2.2 NO Coil Epoxy Plunger Spindle Stopper Seat seal Valve body p. 3/5

13 6027 Safety Shut-Off Valve/Oil Dimensions Version DN2,2 NC Dimensions Version DN3/3.5 NC, DN2.2 NO DN A B C D E F H K L M N P G 1/ M G 1/ G 1/ M G 1/ DN Application A B D E F M N P SW 2.2 NO G 1/8 8 NO G 1/ NC G 1/ NC G1/ NC G3/8 12 NC G1/ M p. 4/5

14 6027 Safety Shut-Off Valve/Oil Dimensions Version DN10 Ordering chart accessories Cable Plug Type 2508 acc. to DIN EN Form A (previously DIN 43650) Fixing screw Circuit Voltage Item no. None (standard) V AC/DC with LED V with LED and varistor V further versions see datasheet Type 2508 Flat seal The delivery of a cable plug includes the flat seal and the fixing screw. Further versions of cable plugs acc. to DIN EN A (previously DIN 43650) see datasheet Type To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice. We reserve the right to make technical changes without notice. Christian Bürkert GmbH & Co. KG 1303/0_EU-en_ p. 5/5

6038 2/2-way Solenoid Valve for neutral media and steam Piston-operated valve with pressure relief Switches without differential pressure For neutral media and steam Temperatures up to +160 C Type

15 6038 2/2-way Solenoid Valve for neutral media and steam Piston-operated valve with pressure relief Switches without differential pressure For neutral media and steam Temperatures up to +160 C Type 6038 can be combined with... Fast switching Type 2508 Type 1078 Type 2511 Type 8600 Cable plug Timer unit ASI cable plug Dosing control The Type 6038 valve is a 2/2-way solenoid valve with direct acting switching character, closed by spring force. It is pressure-relieved and switches without differential pressure. The magnetic core is linked to the seat tube. When the magnetic core is activated, a drilled hole is opened up by a pre-stroke. The core area within the valve is relieved of pressure, and the valve is opened through magnetic force. In the inactive state, the valve is closed by a pressure spring. In doing this, the closing force of the spring is assisted by the pressure of the medium on the magnetic core. Caution waterhammer danger! The valves switch very quickly. If liquid media is used with high differential pressures, high pressure peaks (waterhammer) can occur. Technical data Orifice DN 12 Body material Gunmetal Valve internals Stainless steel and brass Seal material Media Neutral media, preferably steam Media temperature 0 to +160 C Ambient temperature Max. +55 C Operating voltage DN 12 other voltages 24/110/230 V / Hz on request Voltage tolerance ±10% Duty cycle 100% continuous rating Electrical connection Tag connector sidewards acc. DIN EN Form A (for cable plugs Type 2508, see Accessories) Protection class IP 65 with cable plug

16 6038 Technical data Orifice Port connection [inch] Kv value water (m3/h) Pressure Power consumption Response times Weight range [bar] 1) Inrush Hold Opening Closing [kg] [VA] [VA/W] [ms] [ms] 12 G 3/8, G 1/ / Kv value [m³/h]: Flow rate value for water, measured at +20 C, 1 bar 1) Pressure at valve inlet and 1 bar pressure difference Response times [ms]: Measures at valve outlet at 6 bar 1) and +20 C acc. to ISO Opening: Pressure build up % Closing: Pressure relief % Materials Valve body: Seat ring: Gunmetal Gunmetal Seat: Stainless steel (1.4571) Seat seal: Coil: Epoxy Locknut: Surface Zn5glcA Piston: Stainless steel (1.4021) 8 9 O-rings: Plunger seal: FPM Spring: Stainless steel (1.4310) Stopper: Stainless steel (1.4105) p. 2/4

6038 Ordering chart for valves (other versions on request) All valves with gunmetal body, supplied without cable plug (see Accessories) Circuit function Orifice Kv value water [m3/h] Pressure range

17 6038 Ordering chart for valves (other versions on request) All valves with gunmetal body, supplied without cable plug (see Accessories) Circuit function Orifice Kv value water [m3/h] Pressure range [bar] Port connection Seal material Voltage/ frequency [V/Hz] Item no. A 2/2-way valve NC G 3/8 024/ / / G 1/2 024/ / / Ordering chart for valves (cable plug Type 2508 acc. DIN EN Form A) The delivery of a cable plug includes the flat seal and the fixing screw (galvanised and chrome-plated): In the case of stainless steel valves, we recommend a cable plug with a stainless steel screw (see ordering chart, without circuitry) Cable plug Type 2508 Circuitry version Voltage Item no. Fixing screw Without circuitry, standard V AC/DC Without circuitry, SS screw V AC/DC Without circuitry, silicone seal 1) V AC/DC With LED V AC/DC With LED and varistor V AC/DC With LED V AC/DC With LED and varistor V AC/DC Further versions please see Datasheet Type 2508 gasket 1) Silicone seal for higher temperatures; otherwise NBR flat seal p. 3/4

18 I 6038 Dimensions 45 K SW ØD G F L SW N 12 M 29 B A E C H Orifice Ø D port conn. [inch] C thread depth A B E F 12 G 3/ G 1/ G H I K L M N SW To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice. Subject to alteration. Christian Bürkert GmbH & Co. KG 1306/3_EU-en_ p. 4/4

19 По вопросам продаж и поддержки обращайтесь: Архангельск (8182) Астана (7172) Белгород (4722) Брянск (4832) Владивосток (423) Волгоград (844) Вологда (8172) Воронеж (473) Екатеринбург (343) Иваново (4932) Ижевск (3412) Казань (843) Калининград (4012) Калуга (4842) Кемерово (3842) Киров (8332) Краснодар (861) Красноярск (391) Курск (4712) Липецк (4742) Магнитогорск (3519) Москва (495) Мурманск (8152) Набережные Челны (8552) Нижний Новгород (831) Новокузнецк (3843) Новосибирск (383) Орел (4862) Оренбург (3532) Пенза (8412) Пермь (342) Ростов на Дону (863) Рязань (4912) Самара (846) Санкт Петербург (812) Саратов (845) Смоленск (4812) Сочи (862) Ставрополь (8652) Тверь (4822) Томск (3822) Тула (4872) Тюмень (3452) Ульяновск (8422) Уфа (347) Челябинск (351) Череповец (8202) Ярославль (4852) Единый адрес: Веб сайт:

Двойной электромагнитный клапан DMV/12, DMV-D/12, DMV-DLE/12 DUNGS

Двойной электромагнитный клапан DMV/12, DMV-D/12, DMV-DLE/12 DUNGS По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26