SPOOL VALVE. solenoid air operated 3/2 G 1/4. SPECIFICATIONS : air or neutral gas, filtered, lubricated or not PORTS : G 1/4 CONSTRUCTION

Transcription

1 Series SPOOL VALV solenoid air operated / G /4 SPCIFICATIONS FLUI : air or neutral gas, filtered, lubricated or not PORTS : G /4 PRSSUR : to 0 bar TMPRATUR : - C, + 60 C FLOW (Qv at 6 bar) : 860 I/min (ANR) - Kv :, CONSTRUCTION SPOOL VALV Body: black anodized aluminium Internal parts: zinc diecasting, stainless steel, acetal (POM), aluminium Sealings: nitrile (NBR) and polyurethane (PUR) The environmental protected version's internal components are completely isolated from liquids, dust and other aggressive agents in the atmosphere. Moreover, since all of the exhaust can be channeled, this spool valve guarantees environmental protection and can be installed in all sensitive zones (white rooms, etc..) SOLNOI VALV BUILT-IN PILOT Nitrile sealing (NBR) and polyurethane (PUR) lectrical equipment complying with NF C7900 ncapsulated monobloc coil and magnetic circuit, rotatable x 60 Tapped M exhaust port, equipped with exhaust protection Manual override (screwdriver), latched position ports / positions LCTRICAL CHARACTRISTICS Coil Size ~ = Voltages 4V - V - 0V - 0 Hz 4V Consumption Inrush Hold 6 VA,VA(,W), W Insulation class Protection degree F IP 6 lectrical connection Connector rotatable x 80 CM 8 (Pg 9P) CHOIC OF QUIPMNT Symbols functions Pilot (4) Operators Return () Spring with 0 00 Standard version without COS nvironmental protected version with 0 0 without 0 06 (M) : screw-type manual operator ACCSSORIS (identical for / and / spool valves) Supply rail (supplied with seals and banjo bolts, without mounting brackets). Supply rail for «n» valves COS mounting angle brackets, code OPTIONS Other voltages or 60 Hz frequency on request Coil and ATX for dusty explosive atmospheres, zone (see P97) ouble pulse coil, bistable function (see P4) Connector, cable length m : 88 4 lectrovalve with electrical equipped with visual indicator and built-in electrical protection:code for spool valve without + Code with indicator and protection 4 V (~/=) V (~/=) V (~/=) V (~/=) P4-GB-Ra P4-

2 Series - / IMNSIONS AN WIGHTS Weights: Valve + pilot = 0.6 Kg Valve + pilots = 0.46 Kg 0 Ø G/4 8, 7, Ports for / NC = Pressure = Outlet = xhaust 0 = Return = Pilot , 4 9, 98 screw-type manual operator exhaust connection port: M, with protector fixing holes : Ø, counterbore : Ø 9, depth ASSMBLY WITH SUPPLY RAIL Number of valves 4 6 A B C Weight in Kg with pilot ,9,,7,0,4 G /8 9 8 with pilots,,7,,6, 7 87, C B A 4Ø 6, This mounting arrangement allows valves to be mounted in any of 4 positions P4-

3 Series - SPOOL VALV solenoid air operated G /8 - G / / ports / positions FATURS ASCO/JOUCOMATIC solenoid valves satisfy all relevant C irectives The solenoid air operated spool valves / NC have threaded port connections All the exhaust ports of this spool valve are pipable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors poxy moulded coil for general service applications Stainless steel manual operator as standard GNRAL ifferential pressure Max. ambient temperature Flow (Qv with 6 bar) fluids air, inert gas, filtered - 0 bar [ bar = 00 kpa] - C to +60 C /8 = 000 l/min (ANR) / = 800 l/min (ANR) temperature range seal materials - C to +60 C NBR (nitrile) + PUR (polyurethane) CONSTRUCTION Body nd covers Internal parts Sealing Core and core tube Shading coil lectrical protection Black anodized aluminium Glass-filled polyamide Zamak, stainless steel, acetal (POM), aluminium NBR + PUR Stainless steel Copper IP6 SPOOL VALV SPCIFICATIONS pipe (G) orifice flow coefficient Kv (mm) (m /h) (l/min) min. operating pressure differential (bar) max. air ~ = basic catalogue number nvironmental protected version pilot operated - spring return (monostable) /8,49 4, 0 0 GA00 /,, 0 0 GA00 pilot operated and return (bistable) /8,49 4, 0 0 GA006 /,, 0 0 GA006 0 ALL VRSIONS AR AVAILABL WITHOUT CONNCTOR (see P4-4) P4-

4 Series - - / PRFIX description U ustproof - ATX (N 004 & N08--) S C Solenoid with spade plug (N 6070) X Other special constructions SUFFIX suffix 4 M S Screw-type manual operator description LCTRICAL CHARACTRISTICS Coil insulation class F Connector specification ISO 4400 Connector Spade plug ( PgP) lectrical safety IC Standard voltages C(=) 4V AC (~) 4V - V - 0V/0Hz; Other voltages and 60Hz are available on request power ratings operator ambient electrical replacement coil inrush holding hot/cold temperature safety code enclosure ~ ~ = range (TS) protection ~ = (VA) (VA) (W) (W) ( C) (N 09) 0 V / 0 Hz 4 V C SC 7 /6,9 - to +60 N 6070 moulded IP SCU 7 /6,9 - to +60 II IP6 T C moulded IP6 - - PROUCT SLCTION GUI STP Select basic catalogue number Refer to the specifications table on page. xample: GA00 STP Select (combination). Refer to the table. xample: SC STP Suffix MS mandatory. See the suffix table. ORRING XAMPLS: SC G A 00 MS 0V / 60 Hz SCU G A 006 MS V / 0 Hz SC G A 00 MS 4V C SCX G A 00 MS 4V C TPL 7777 STP 4 Select voltage. Refer to standard voltages. xample: 0 V / 0 Hz STP Final catalogue / ordering number. xample: SC GA00 MS 0V / 0 Hz pipe thread basic number TPL numb. voltage suffix HOW TO ORR A VRSION WITHOUT CONNCTOR: Use the TPL The ASCO TPL number (Temporary Parts List) indicates special construction. In this case, the spool valve catalogue number contains the "X" and the TPL number must always be mentioned following the spool valve catalogue number. xample : SCX GA00 MS 0V / 0 Hz TPL7777 P4-4

5 Series - - / ACCSSORIS pipe exhaust protector G / G / OPTIONS Other pipe threads are available on request ustproof ATX (SCU) with a coil and spade plug with lead ( m lead), TPL 890 Compliance with "UL" standard is available on request INSTALLATION Installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dust, liquids etc.) Threaded pipe connection identifier is G = G (ISO 8/) IMNSIONS (mm), WIGHT (kg) Prefix "SC" and "SCU" Solenoid poxy moulded IC / ISO 4400 / IP6 II IP6 T 8 C to T C 0 x /8 () - G/ () F G* M H mounting holes Ø 6., Spotfacing: Ø, depth 6 mm * + mm for removal ** + mm for coil removal () Incl. coil(s) and (s) 0 0 I** J** P K** Q H L M N O* series F G H I J K L M N O P Q Ports for / NC = Pressure = Outlet = xhaust 0 = Return = Pilot weight () monost. bistable 40, 6 4, 6,,8 99, 70,, 7, 0 9,, 7, 0,70,00 40, 6 4, 6,,8 98, 70,, 7, 0 9,, 9, 0,69 0,99 P4- ASCO/JOUCOMATIC reserves the right to alter the availability, design and specifications without notice.