SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, 1/4 to 1/2

Transcription

1 SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, /4 to / 0 / 0 Series FTURS The monostable spool valves have TÜV-XI certified I 6508 Functional Safety data and can be used up to SIL 4 (55/TÜV)-SIL (55-55/XI) The spool valves / N have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) poxy moulded coil for general service applications The solenoid valves satisfy all relevant irectives GNRL ifferential pressure Flow (Qv at 6 bar) - 0 bar [ bar = 00 kpa] /4 = 860 l/min (NR) /8 = 000 l/min / = 800 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - 5 to + 60 NR (nitrile) + PUR (polyurethane) MTRILS IN ONTT WITH FLUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised nd covers Glass-filled P Internal parts Zamak, stainless steel, POM, aluminium Seals NR + PUR ore and plugnut Stainless steel Shading coil opper IR OPRT SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) option basic catalogue number min. air ( ) ( ) (mm) (m /h) (l/min) ~ = ir pilot operated - spring return (monostable) /4 6 0,75, () /8,49 4, () /,5 5, () ir pilot operated and return (bistable) /4 6 0,75, /8,49 4, /,5 5, LP Not available Low RP,5W - 4W Reduced MP P Not available 5W - 6,9W Medium asic POWR LVLS - cold electrical holding values (watt) PILOT OPRT SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) level optional solenoids basic catalogue number TX / Ix IP65 min. air ( ) - x e mb x mb - ( ) (mm) (m /h) (l/min) ~ = ~/= - WLP PV - S Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5 0 0 RP () /4 6 0,75,5 0 0 RP X () /8,49 4,5 0 0 RP-P () /,5 5,5 0 0 RP-P () Solenoid air pilot operated and return (bistable) /4 6 0,75,5 0 0 RP /4 6 0,75,5 0 0 RP X /8,49 4,5 0 0 RP-P /,5 5,5 0 0 RP-P Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature - Not available () ertified I 6508 Functional Safety data, use suffix "SL". ll leaflets are available on: PI-4-40-G 80049G-0/R0

2 SRIS PRFIX TL level description LP RP MP P P V ncapsulated epoxy moulded (N/I , 64-8)* - - W L P I.S./encapsulation with PT IP67 enclosure (N/I )* S Solenoid with spade plug connector (N/I 6070) - - X Other special constructions - - SUFFIX TL suffix level description 4 5 LP RP MP P G Non-electrical, G c, construction safety, gas/dust (N 46-5) M S Screw type manual operator - - S L ertified I 6508 Functional Safety data () - - vailable feature - Not available * TX solenoids are also approved according to N 46- (non electrical valves) () Not to use with MS suffix PROUT SLTION GUI STP Select the fluid temperature range and seal material from the general table on page. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications table on page. xample : G55005 STP Select (combination). Select the appropriate operator from the specifications table on page and the table on page. Select for this operator in the electrical characteristics table on page : the level (RP, MP, P), the type of electrical enclosure protection and the desired temperature class. The air operated version is without. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. o not use es for air operated versions. xample : S STP Select suffix (combination) if required. Suffix G only applies for the air operated versions, do not use suffix MS. xample : MS STP 4 Select voltage. Refer to standard voltages on page. xample : 0V / 50Hz STP 5 Final catalogue / ordering number. xample : S G55005MS 0 V / 50 Hz OPTIONS & SSORIS series pipe exhaust protector (stainless steel) (G) (NPT) (M) 55 / () () - 55 / () () - 55 / () () - 55/55/ () () Provided with "SL" suffix. ORRING XMPLS: S G MS 0V / 50 Hz PV X V / 50 Hz WLP G MS 4V / S G MS 4V / G G G G G SL S G SL ll leaflets are available on: pipe thread basic number voltage suffix 80049G-0/R

3 SRIS XPLNTION OF TMPRTUR RNGS OF SOLNOI VLVS Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages (=) 4V - 48V (~) 4V - 48V - 5V - 0V/50Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil inrush holding hot/ temperature enclosure cold safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (N 6059) 0 V / 50 Hz 4 V type () asic (P) S /6,9-5 to +60 N 6070 moulded IP PV - - 6, -/6,9-40 to +65/40 II G/ x mb II T/x m moulded IP65 - (4) - (4) 04 Reduced (RP) S 6,5,5,5/ -5 to +60 N 6070 moulded IP PV / -40 to +65/60 II G/ x mb II T/x m moulded IP65 - (4) - (4) 0 WLP - -,5 -/4-40 to +65 IIG x e mb II T4, II x t III b IP67 PT - (4) - (4) () Refer to the dimensional drawings on pages and 4 (ir operated versions, see page 6 for types 7 and 8). (4) Multiple coil kits available under TX, contact us LTRIL ONNTIONS connection S Spade plug connector with cable gland IN 4650, mm, industry standard, for cables with an outer diameter from 6 to 8 mm (type 0) or N (ISO 4400) for cables with an outer diameter from 6 to 0 mm (type 0). PV Moulded-in cable, standard length m WLP M0 cable gland for cables with an outer diameter from 7 to 8,5 mm. With an internal and external facility for an earthing or bonding conductor ITIONL OPTIONS Other pipe threads are available on request x mb/m ( "PV") solenoid can be supplied with various cable lengths ompliance with "UL" vailable on request (series 55-55) INSTLLTION Installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation o not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 6508 Functional Safety (Suffix SL), allowable temperature range: -40 to +60. Probability of failure on demand, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the valve if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 = NPT (NSI.0.); G = G (ISO 8/) IMNSIONS (mm), WIGHT (kg) TYP 0: S poxy moulded I 5 / IN 4650 TYP 0: S poxy moulded I 5 / ISO / 005MS / 006 / 006MS / 005MS / 006 / 006MS / 005MS / 006 / 006MS F x /4 F x /8 (55) - / (55) G H I 0 J P Q K H L M N O I J mounting holes dia. 5,; spotfacing: dia. 9, depth 5 mm mounting holes dia. 6,5; spotfacing: dia., depth 6 mm G H 60 0 P K Q 90 ll leaflets are available on: H L M N O G-0/R0

4 SRIS IMNSIONS (mm), WIGHT (kg) TYP 0: PV poxy encapsulated N/I and N/I 64-8 TYP 04: PV poxy encapsulated N/I and N/I / 005MS 0787 / / 006MS / 005MS / 006 / 006MS / 005MS / 006 / 006MS F x /4 F x /8 (55) - / (55) G 0 I J P Q K L M N O G 60 0 I J P Q K L M N O TYP 05: WLP Metal cap/pt N/I , N/I and N/I 64- TYP 06: WLP Metal cap/pt N/I , N/I and N/I / 005MS / 006 / 006MS / 005MS / 006 / 006MS / 005MS / 006 / 006MS F x /4 F x /8 (55) - / (55) G 60 0 L M N O G 60 L M N O I J P Q K 0 I J P K Q type ll leaflets are available on: option level F G H I J K L M N O P Q weight () monost. bistable 0 (55) S RP 7,5-8,5 49 9, ,5 0,5 0,4 0 (55) S P 40, - 6 4, 56,,8,6 70,, 5 7, 0 9,, 7,5 0,70,00 0 (55) S P 40, - 6 4, 56,,8,6 70,, 5 7, 0 9,, 9,5 0,69 0,99 0 (55) PV RP 7,5 9 8,5 6,5 9, ,5 0,7 0,49 04 (55) PV P 40, - 6 4, 6,5,8,6 70,, 5 7, 0, 9,, 7,5 0,7,0 04 (55) PV P 40, - 6 4, 6,5,8 0,6 70,, 5 7, 0, 9,, 9,5 0,7,0 05 (55) WLP RP 7,5 7 8,5 8,5-9, ,5 0,44 0,6 06 (55) WLP RP 40, 7 6 4, 8,5 -,6 70,, 5 7, 45,5 7,65, 7,5 0,80,7 06 (55) WLP RP 40, 7 6 4, 8,5-0,6 70,, 5 7, 45,5 7,65, 9,5 0,79,6 () Including coil(s) and connector(s) G-0/R0

5 SRIS SSORIS SRIS 55, 55 and 55 Supply rail (supplied with seals and banjo bolts, without mounting brackets) catalogue number supply rail for "n" valves series 55 series 55 series 55 G /4 NPT /4 G /8 NPT /8 G / NPT / () () vailable on request. Mounting brackets (set of ), for series 55: catalogue number for series 55-55: catalogue number supply rail with isolation valves with mounting brackets () llows the isolation of one or more valves from the general pressure supply supply rail for "n" valves catalogue number G /4 NPT / () () () or () supply rail () mounting brackets (x) Series number of valves type 0, monost.* 0,9,,7,0,4,9, type 0, bistable*,,7,,6,,6 4, (55) (55-55) Series number of valves type 0, monost.*,,9,8 4,7 5,6 6,4 7,4 type 0, bistable*,5,6 4,8 5,9 7, 8, 9, * Weight (kg) This mounting arrangement allows valves to be mounted in the positions bellow. ( ) ( ) (55) (55) 96, (55-55) G /8 (55) G /4 (55-55) 9 (55) 4 (55-55) 4Ø 6,5 (55) 4Ø 9 (55-55) 59 (55) 6, (55-55) 9 (55) 7 (55-55) 75 (55) 08 (55-55) 8 (55), (55-55) (55) ( ) (55) 75 (55-55) (55) 7,5 (55-55) 5 (55) 5 (55-55) 7 (55) 0 (55-55) ( ) (55) ( ) (55) 48 (55) 0 (55-55) 8 (55) 8 (55-55) Not possible with supply rail and isolation valves ( ) (55) 94 (55) 60 (55-55) Supply rail with isolation valves for series ll leaflets are available on: Only with supply rail with isolation valves (Series 55) G-0/R0

6 SRIS IMNSIONS (mm), WIGHT (kg) TYP 07: No, IP65 (suffixes, G: II G c, SL: SIL or GSL: SIL, II G c) ir operated version (supply rail - see below) TYP 08: No, IP65 (suffixes, G: II G c, SL: SIL or GSL: SIL, II G c) ir operated version (supply rail - see below) 5505 / / 5506 / 5505 / 5506 G/8 L F 0 I J P Q K x /4 M mounting holes dia. 5,; spotfacing: dia. 9, depth 5 mm mounting holes dia. 6,5; spotfacing: dia., depth 6 mm G/4 F I P Q J K x /8 (55) - / (55) L M type F I J K L M P Q weight monost. bistable 07 (55) 7,5 50, ,5 0,8 0,6 08 (55) 40, 6 78,5 75,6 4, ,, 7,4 0,8,07 08 (55) 40, 6 78,5 74,6 4, ,, 9,4 0,80,06 SSORIS SRIS 55, 55 and 55 Supply rails: see catalogue numbers on page 5 Series number of valves type 07, monost.* 0,9,,5,9,,5,8 type 07, bistable*,0,4,9,,7,,5 ll leaflets are available on: Ø 6,5 Series number of valves type 08, monost.*,,0,8 4,7 5,5 6, 7, type 08, bistable*,5,5 4,6 5,7 6,7 7,7 8,7 * Weight (kg) équerres support () série code G /8) 9 This mounting arrangement allows valves to be mounted in the positions bellow , Not possible with supply rail and isolation valves 9 () () () or () supply rail () mounting brackets (x) () Only with supply rail with isolation valves (Series 55) Supply rail with isolation valves for series 55 PI G -- vailability, design and specifications are subject to change without notice. ll rights reserved G-0/R0

7 SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, /4 to / 0 / Series FTURS The monostable spool valves have TÜV-XI certified I 6508 Functional Safety data and can be used up to SIL 4 (55/TÜV)-SIL (55-55/XI) The spool valves / N have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant irectives GNRL ifferential pressure Flow (Qv at 6 bar) - 0 bar [ bar = 00 kpa] /4 = 860 l/min (NR) /8 = 000 l/min / = 800 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - 5 to + 60 NR (nitrile) + PUR (polyurethane) MTRILS IN ONTT WITH FLUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised nd cover (spring return) Glass-filled P Spool valve internal parts Zamak, stainless steel, POM, aluminium Pilot internal parts Refer to specific solenoid catalogue pages Pilot end covers luminium ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals NR Top disc P isc holder artridge (low ) Welded, stainless steel or aluminium Seat rass Seat insert Shading coil opper Rider rings (low ) PTF UP LP RP-MP P Not available 0,4W - W Not available 0,5W -,W Ultra Low Low Reduced and Medium asic POWR LVLS - cold electrical holding values (watt) SPIFITIONS operating pressure flow optional solenoids pipe orifice differential (bar) coefficient basic max. (PS) level kv NM TX / Ix catalogue IP65 min. () air ( ) 7 & 9 x d x e mb x mb x ia x ia - number ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF - M PV LI IS - S Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5 0/ 0 0 P () /4 6 0,75,5 0/ 0 0 P H405 () /4 6 0,75,5 0/ 0 0 LP - - m m m () /4 6 0,75,5 0/ 0 0 LP m H05 () /8,49 4,5 0/ 0 0 P () /8,49 4,5 0/ 0 0 P G405 () /8,49 4,5 0/ 0 0 LP - - m m m () /8,49 4,5 0/ 0 0 LP m G05 () /,5 5,5 0/ 0 0 P () /,5 5,5 0/ 0 0 P G405 () /,5 5,5 0/ 0 0 LP - - m m m () /,5 5,5 0/ 0 0 LP m G05 () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature m vailable feature in only - Not available () ertified I 6508 Functional Safety data, use suffix "SL" () Zero minimum is only achieved if external pressure is applied ll leaflets are available on: G-0/R0

8 SPIFITIONS pipe ll leaflets are available on: orifice flow coefficient kv operating pressure differential (bar) optional solenoids max. (PS) level NM TX / Ix min. () SRIS basic catalogue number IP65 air ( ) 7 & 9 x d x e mb x mb x ia x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF - M PV LI IS - S Solenoid air pilot operated and return (bistable) /4 6 0,75,5 0/ 0 0 P /4 6 0,75,5 0/ 0 0 P H406 /4 6 0,75,5 0/ 0 0 LP - m - m m m /4 6 0,75,5 0/ 0 0 LP m H06 /8,49 4,5 0/ 0 0 P /8,49 4,5 0/ 0 0 P G406 /8,49 4,5 0/ 0 0 LP - m - m m m /8,49 4,5 0/ 0 0 LP m G06 /,5 5,5 0/ 0 0 P /,5 5,5 0/ 0 0 P G406 /,5 5,5 0/ 0 0 LP - m - m m m /,5 5,5 0/ 0 0 LP m G06 Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature m vailable feature in only - Not available () Zero minimum is only achieved if external pressure is applied PRFIX TL level description LP RP MP P F xplosionproof - NM 7, 9 - Zinc plated steel conduit m - - M Waterproof IP67 - Metal enclosure (N/I , 64-)* - - T Threaded conduit/hole (M0 x,5) - - I S S Intrinsically safe with S coil (N/I , 64-)* m L P K F Flameproof - luminium (N/I , 64-)* N F Flameproof - luminium (N/I , )* - - P V ncapsulated epoxy moulded (N/I , 64-8)* m - - S Solenoid with spade plug connector (N/I 6070) - - W P Waterproof IP67 - Metal enclosure - - L I I.S. with luminium IP67 enclosure (N/I / 64-)* m W S Waterproof IP67-6 SS enclosure - - W S L P K F Flameproof - 6 SS (N/I , 64-)* W S M Waterproof IP67-6 SS enclosure (N/I , 64-)* - - W S N F Flameproof - 6 SS (N/I , )* - - T Threaded conduit (/" NPT) - - H T lass H - High temperature (ambient +80 ) X Other special constructions - - SUFFIX TL suffix level description 4 5 LP RP MP P M O Push type manual operator - - S L ertified I 6508 Functional Safety data (4) - - M F Low temperature * TX solenoids are also approved according to and N 46- (non electrical valves) vailable feature vailable feature in only - Not available (4) Not to use with MO suffix OPTIONS & SSORIS series pipe exhaust protector (stainless steel) (G) (NPT) (M) 55/55/55 / (5) (5) - 55 / (5) (5) - 55 / (5) (5) - 55 / (5) (5) (5) Provided with "SL" suffix. PROUT SLTION GUI STP Select the fluid temperature range and seal material from the general table on page 7. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications table above. xample : G55405 STP Select (combination). Select the appropriate operator from the specifications table on page 7 and the table on page 8. Select for this operator in the electrical characteristics table on page 9: the level (LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample : M STP Select suffix (combination) if required. xample : MO STP 4 Select voltage. Refer to standard voltages on page 9. xample : 0V / 50Hz STP 5 Final catalogue / ordering number. xample : M G55405MO 0 V / 50 Hz ORRING XMPLS: S G V / 50 Hz S G SL 0V / 50 Hz S G MO 0V / 50 Hz SHT MO 0V / 50 Hz LPKF G MO 4V / ISS G MO 4V / LI G V / M MO 0V / 50 Hz F G 55 H 405 MO 40V / 60 Hz (6) pipe thread voltage basic number (6) suffix (6) Prefixes F should always be used with the letter H or G in the basic number G-0/R0

9 XPLNTION OF TMPRTUR RNGS OF SOLNOI VLVS Valve temperature range Operator ambient temperature range Total temperature range SRIS The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages (=) 4V - 48V (~) 4V - 48V - 5V - 0V (5) /50Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil / kit inrush holding hot/cold temperature enclosure safety code type option range (TS) protection () ~ ~ = ~ = (V) (V) (W) (W) ( ) () (N 6059) 0 V/50 Hz 4V/ asic (P) S 55 0,5 9/, -40 to +75 N 6070 IP65 moulded WP/WS 55 0,5 9/, -40 to +75 N 6070 IP67 steel/ss NF/WSNF 55 0,5 - (-60) (7) -40 to +5/40/60 IIG x d II T6/T5/T4, II x t IP67 alu./ss NF/WSNF /, (-60) (7) -40 to +40/60/75 IIG x d II T6/T5/T4, II x t IP67 alu./ss M/WSM 55 0,5 9/, -40 to +40 IIG x e mb II T, II x t IP67 steel/ss PV 55 0,5 9/, -40 to +65 IIG x mb II T(~)/T4(=),II x m IP67 moulded - (4) - (4) 05 F 55 0,5 9/, -40 to +54/40 NM type 7 and 9 NM 4X Low (LP) S,5,5,5,7/,7-40 to +60 N 6070 IP65 moulded WP/WS,5,5,5,7/,7-40 to +60 N 6070 IP67 steel/ss LPKF/WSLPKF (8),4,4,4 0,5/0,5 (8) -40 to +80/60 IIG x d II+H Gb T4/T6, II x t b IP67 alu./ss - (4) - (4) NF/WSNF - -,9 - /,9 (-60) (7) -40 to +75/80 IIG x d II T6/T5, II x t IP67 alu./ss - (4) (5) - (4) 08 M/WSM,5,5,5,7/,7-40 to +40/55 IIG x e mb II T6/T5, II x t IP67 steel/ss - (4) - (4) 09 PV - - -,7/,7-40 to +65 IIG x mb II T6 / II x m IP67 moulded - - (4) 0 F - - -,7/,7-40 to +60 NM type 7 and 9 NM 4X - - (4) ISS () ,4/04-40 to +60 IIG x ia II T6, II x ia IP65 moulded LI () (6) ,5/0,5-40 to +60 IIG x ia II T6 Ga, II x t III b (6) IP67 alu. - - (4) 4 option safety parameters U I = () I I P I L I I (V) (m) (W) (H) (µf) Low (LP) ISS 500,5 0 0 LI 500,5 0 0 () Temperature range can be limited by sealings () Refer to the dimensional drawings on pages: 0 to 4 () ISS/LI: heck the electrical characteristics in the corresponding catalogue pages (4) Multiple coil kits are available under TX/Ix, contact us (5) (WS)NF: Low Power, 0 V does not exist. Maximum voltage in is 5 V (6) LI: Low Power, 4 V only (For use in zone 0 locations, see the installation conditions given in the I&M instructions) (7) The certified minimum temperature of this operator (8) LPKF/WSLPKF: 4 V, max. ambient temp. +80, contact us (48 V =, W) - Not available LTRIL ONNTIONS connection S, ISS Spade plug connector with cable gland N (ISO 4400) for cables with an outer diameter from 6 to 0 mm WP, WS, M, WSM M0 cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor NF, WSNF, LPKF, WSLPKF /" NPT threaded cable entry. nclosures are supplied without cable gland PV Moulded-in cable, standard length m LI /" NPT cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor F /" NPT conduits, standard length 5 cm ITIONL OPTIONS Valves configured for external pilot air supply, TPL 0547 Other pipe threads are available on request x mb/m ( "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request /" NPT ( "T") and M0 x.5 ( "T") conduits (aluminium or 6 SS) available for steel solenoid housing INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation o not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 6508 Functional Safety (suffix SL), allowable temperature range: -40 to +60. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 = NPT (NSI.0.); G = G (ISO 8/) Prefix "NF/WSNF" enclosure is provided with a /" NPT threaded entry hole, M0 x,5 ( "T") is optional. oth are supplied without cable gland ll leaflets are available on: G-0/R0

10 SRIS IMNSIONS (mm), WIGHT (kg) Types 0 to Series 55 Series ,5 /8 69,5 x /4 7, , /8 x /8 (55) - / (55) 96, ,5, 80,5 7 mounting holes dia. 5, mm Spotfacing: dia. 9 mm, depth 5 mm, 7,4 (55) 9,6 (55) 9,4 (55) 9,6 (55) 5, , mounting holes dia. 6,5 mm Spotfacing: dia. mm, depth 8 mm TYP 0: S poxy moulded I 5 / ISO 4400 TYP 0: NF / WSNF luminium; epoxy coated / ISI 6 SS N/I and N/I / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO 6 / / NPT TYP 04: WP / WS M / WSM Steel; epoxy coated / ISI 6 SS I 5 / N /8 and N / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO / ll leaflets are available on: G-0/R

11 SRIS IMNSIONS (mm), WIGHT (kg) TYP 05: PV poxy encapsulated N/I and N/I 64-8 TYP 06: F: NM type 7 and 9 poxy encapsulated IS-6 NSI NOT: applicable to solenoid only / 406 / 405MO / 406MO / 406 / 405MO / 406MO / 406 / 405MO / 406MO 55H405 / H406 / H405MO / H406MO 55G405 / G406 / G405MO / G406MO 55G405 / G406 / G405MO / G406MO /8 / TYP 07: S poxy moulded I 5 / ISO 4400 TYP 08: NF / WSNF luminium; epoxy coated / ISI 6 SS N/I and N/I / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO /8 NPT / NPT TYP 09: WP / WS M / WSM Steel; epoxy coated / ISI 6 SS I 5 / N /8 and N 64- TYP 0: PV poxy encapsulated N/I and N/I / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO /8 NPT 4 /8 NPT ll leaflets are available on: G-0/R

12 SRIS IMNSIONS (mm), WIGHT (kg) TYP : F: NM type 7 and 9 poxy encapsulated IS-6 NSI NOT: applicable to solenoid only TYP : ISS Polypropylene moulded poxy moulded I 5 / N /6 and N/I 64-55H05 / H06 / H05MO / H06MO 55G05 / G06 / G05MO / G06MO 55G05 / G06 / G05MO / G06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO /8 /8 NPT TYP : LPKF / WSLPKF luminium, cataphorese black painting / ISI 6L SS N/I and N/I 64- TYP 4: LI luminium, cataphorese black painting I and N: , / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO 5505 / 06 / 05MO / 06MO /NPT 0 / NPT x d certified cable gland (on request) Three-core cable, length m 4 able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 90 increments, cable ø 6-0 mm 8 Push type or screw type manual operator, suffix MO 9 xternal pilot air supply, /8 pipe 0 able gland for unarmoured cable with 7 to mm dia. sheath onnectable pilot exhaust port Non-connectable pilot exhaust port ll leaflets are available on: G-0/R0

13 SRIS IMNSIONS (mm), WIGHT (kg) type option level weight () monostable bistable 55 55/ 55/ 55/ 55/ 55/ S P 5, ,7,,5 6,5 86,5 00, 0,76,45,5,4,0,9 0 NF / WSNF P 58 97, 4 87,6 4,8 5, ,85,49,9,5 4,5 4,05 04 WP/WS P 48 69, 04, 0, ,84,46,6,49,0,9 04 (WS)M P 48 69, 04, 0, ,84,46,6,49,0,9 05 PV P 5, ,5,5 6,5 67,5 8, 0,8,46,6,45,0,9 06 F P, ,5 95,5 6,5 74,5 88, 0,64,46,6,9,0,9 07 S LP,5 5, ,5,5 6,5 87,5 0, 0,97,66,56,55,,6 08 NF / WSNF LP 58 97, 4 87,5 4,8 5, ,85,49,9,5 4,5 4,05 09 WP/WS/(WS)M LP 48 69, 04, 0,, ,05,67,57,70,,4 0 PV LP 5, ,5 0,5 6,5 67,5 8,,0,67,57,67,, F LP, ,5 0,5 6,5 74,5 88, 0,85,67,57,50,4,4 ISS LP ,5 4,5 6,5 89,5 0,5 0,80,49,9,4,05,95 LPKF LP 4 64,5 9, ,90,86,76,6,, WSLPKF LP 4 64,5 9, ,5,46,77,8,5,8 4 LI LP 4 64,5 9, ,9,87,77,6,, () Including coil(s) and connector(s). SSORIS ø4 /8 NPT ø4 0 /4 NPT Ø /8 NPT pilot exhaust protector part no pilot top exhaust low (SO solenoid interface) Ø /8 /4 /8 / 4,5 0 4 exhaust protector (stainless steel) ll leaflets are available on: G-0/R0

14 SRIS ll leaflets are available on: PI G -- vailability, design and specifications are subject to change without notice. ll rights reserved G-0/R0

15 SOLNOI VLVS solenoid air pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, /4 to / 0 / Series FTURS The monostable spool valves have TÜV-XI certified I 6508 Functional Safety data and can be used up to SIL 4 (55/TÜV)-SIL (55-55/XI) The spool valves / N have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) Ultra low level for inside application, suitable to connect to process fieldbus remote I/O or valve couplers The solenoid valves satisfy all relevant irectives GNRL ifferential pressure - 0 bar [ bar = 00 kpa] Flow (Qv at 6 bar) /4 = 860 l/min (NR) /8 = 000 l/min / = 800 l/min fluids ( ) temperature range (TS) seal materials ( ) - 5 to + 40 air, inert gas, filtered () NR (nitrile) + PUR (polyurethane) - 5 to + 60 () With series 0 pilots, es FS/FVT/FSIS/FSZN. MTRILS IN ONTT WITH FLUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised nd cover (spring return) Glass-filled P Spool valve internal parts Zamak, stainless steel, POM, aluminium Pilot internal parts Size 0 ( ), refer to specific catalogue pages: 74 pilots (TNK) and 95 (LIS) Size 5 (06.6.0N), refer to specific catalogue pages: 0 pilots (FS/FVT/FSIS/FSZN) and 60 piezotronic (PIS-PISIS) Pilot end covers luminium UP LP 0,00W - 0,5W 0,5W -,5W RP-MP P Not available 0,5W -,W Ultra Low Low Reduced and Medium asic SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) min. level optional solenoids POWR LVLS - cold electrical holding values (watt) max. (PS) TX / Ix IP65 air ( ) x d x ia x n NOMO 0 basic catalogue number NOMO 5 ( ) (mm) (m /h) (l/min) ~ = ~/= TNK LIS FSIS PISIS FSZN FS PIS Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5 0 0 LP m () /4 6 0,75,5-8 LP - - m () /4 6 0,75,5 0 0 P () - /4 6 0,75,5-8 LP - m /4 6 0,75,5 8 8 UP m () /8,49 4,5 0 0 LP m () /8,49 4,5-8 LP - - m () /8,49 4,5 0 0 P () - /8,49 4,5-8 LP - m /8,49 4,5 8 8 UP m () /,5 5,5 0 0 LP m () /,5 5,5-8 LP - - m () /,5 5,5 0 0 P () - /,5 5,5-8 LP - m /,5 5,5 8 8 UP m () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature m vailable feature in only - Not available () ertified I 6508 Functional Safety data, use suffix "SL". ll leaflets are available on: G-0/R0

16 SPIFITIONS pipe ll leaflets are available on: orifice flow coefficient kv operating pressure differential (bar) min. level optional solenoids SRIS max. (PS) TX / Ix IP65 air ( ) x d x ia x n NOMO 0 basic catalogue number NOMO 5 ( ) (mm) (m /h) (l/min) ~ = ~/= TNK LIS FSIS PISIS FSZN FS PIS Solenoid air pilot operated and return (bistable) /4 6 0,75,5 0 0 LP m /4 6 0,75,5-8 LP - - m /4 6 0,75,5 0 0 P /4 6 0,75,5-8 LP - m /4 6 0,75,5 8 8 UP m /8,49 4,5 0 0 LP m /8,49 4,5-8 LP - - m /8,49 4,5 0 0 P /8,49 4,5-8 LP - m /8,49 4,5 8 8 UP m /,5 5,5 0 0 LP m /,5 5,5-8 LP - - m /,5 5,5 0 0 P /,5 5,5-8 LP - m /,5 5,5 8 8 UP m PRFIX TL level description UP LP RP P NOMO solenoid (pilot) interface 0 L I S Intrinsically safe, pilot 95, TX (N/I , 64-)* - m - - T N K Flameproof with pilot 74, TX (N / 64-)* NOMO solenoid (pilot) interface 5 F S Solenoid + spade plug MP,5x0,5, 9,4 mm, (N 6070), 0 pilot F V T Solenoid with M connection, L + protection (N 6070), 0 pilot - m - - F S I S Intrinsically safe, 9,4 mm, pilot 0; TX (N / 64)* - m - - F S Z N Non sparking, connector 9,4 mm cable m, pilot 0 (N 60079/64) * - m - - P I S Solenoid with spade plug connector (N 6070), 60 piezotronic pilot P I S I S Intrinsically safe, piezotronic 60 pilot, TX (N / 64)* m SUFFIX TL suffix level description 4 5 UP LP RP P NOMO solenoid (pilot) interface 0 M S Screw type manual operator () () S L ertified I 6508 Functional Safety data (monostable) () NOMO solenoid (pilot) interface 5 M S Screw type manual operator () M O Push type manual operator / / - - S L ertified I 6508 Functional Safety data (monostable) / / - - OPTIONS & SSORIS series pipe exhaust protector (stainless steel) (G) (NPT) - 55/55/55 / () () - 55 / () () - 55 / () () - 55 / () () - 55/55/ () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only - Not available * TX solenoids are also approved according to N 46- (non electrical valves) () Not to use with SL suffix () Provided with SL suffix (series 55) () Not to use with LIS PROUT SLTION GUI STP Select the fluid temperature range and seal material from the general table on page. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications tables on pages and 4. xample : G55505 STP Select (combination). Select the appropriate operator from the tables on pages and 4. Select for this operator in the electrical characteristics table on page 5: the level (UP, LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample : FS STP Select suffix. Suffix MO mandatory for the pilot 0 (FSIS/FSIS/FVTIS/FSZN/ FVTZN). Refer to the suffix table on page 4, respect the indicated level. xample : MO STP 4 Selection of TPL is mandatory for the 60 pilot (PISIS), HV ( mw) and 4 HV (5 mw). dd "X" between the "PISIS" and the basic catalogue number. STP 5 Select voltage. Refer to standard voltages on page 5. xample : 0V / 50Hz STP 6 Final catalogue / ordering number. xample : FSG55505MO 0 V / 50 Hz ORRING XMPLS: TNK G V / 50 Hz TNK G MS 5V / 50 Hz TNK G SL 4V / LIS G V / FS G V / 50 Hz FS MO 0V / 50 Hz FS G SLMO 0V / 50 Hz FVTZN G V / PISIS G MO 6V / PISIS G SLMO 6V / PISIS X G MO TPL0666 4HV / voltage pipe thread TPL basic number suffix 8005G-0/R0

17 XPLNTION OF TMPRTUR RNGS OF SOLNOI VLVS Valve temperature range Operator ambient temperature range Total temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages (=) TNK : 4V - 48V ; FS/FSZN/FVT : 4V FSIS : V - 4V ; LIS :..4V, PIS : 4V à 70V ; PISIS : 6V, 8V, V, 4V (~) TNK : 4V - 48V - 5V - 0V/50Hz ; FS : 4V - 5V - 0V/50Hz ; PIS : 4V to 70V - Other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil inrush holding hot/ temperature enclosure cold safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (N 6059) - - type () asic (P) TNK 55 0,5 9/, -0 to +50/60 II G/ x d II+H T4/x t aluminium IP Low (LP) FS,4,, /, -5 to +60 N 6070 moulded IP FS, (7),6 (7),5 (7) - -5 to +60 N 6070 moulded IP FVT (6) - - -,5/,5-5 to +60 N 6070 moulded IP FSZN /, -5 to +40/55/60 II G x n II T6/T5/T4, II x t moulded IP FSIS (4)(5) ,5-0 to +40/60 II G x ia II T6/T4, II x ia 0 moulded IP LIS ()(4) ,5-40 to +65 II G x ia II T6 Ga, II x ib III b () moulded IP Ultra low (UP) PIS ,007-0 to moulded IP PISIS ()(4) 6V ,00-0 to +50 II G x ia II T6, II x ia 0 moulded IP PISIS ()(4) 8V ,0-0 to +50 II G x ia II T6, II x ia 0 moulded IP PISIS ()(4) LV ,0-0 to +50 II G x ia II T6, II x ia 0 moulded IP PISIS ()(4) HV ,0-0 to +50 II G x ia II T6, II x ia 0 moulded IP PISIS ()(4) 4LV ,046-0 to +50 II G x ia II T6, II x ia 0 moulded IP PISIS ()(4) 4HV ,5-0 to +50 II G x ia II T6, II x ia 0 moulded IP () Piezotronic standard voltages: Prefix PIS, 4 V to 70 V /, peak current max. : 80 m, holding current max. : m Prefix PISIS: 6 V / mw 8 V / mw L V / mw H V / mw 4L V / 46 mw 4H V / 5 mw Turn ON voltage U ON V 7,.. V 0,8.. 6 V 0,8.. 6 V,6.. 8 V,6.. 8 V Turn OFF voltage U OFF V, V, V, V 5 V 5 V Peak current 6 m 0 m 6,8 m 8, m 0 m 4 m Holding current 0,5 m,8 m m,7 m,9 m 5, m able + max. barrier resistances (R S + R ) 00 Ω max. 00 Ω max. 00 Ω max. 470 Ω max. 00 Ω max. 470 Ω max. () safety parameters Refer to the dimensional drawings on pages 8 to 0. () Min. operating current (I(ON) min.): 0,06 / U (ON) min. =,8 V (For use in zone 0 U I = () I I P I L I I locations, see the installation conditions given in the I&M instructions) (4) Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue (V) (m) (W) (H) (µf) pages (FSIS/LIS/PISIS: 0/950006/60 pilots). (5) FSIS (0 pilots): V : I (ON) min., with L = m; U (ON) min.=,9 V; U (max.) recommended = V; U (OFF) =, V; I (OFF) = 0 m 4 V : I (ON) min., with L = 5 m; U (ON) min.= 6,4 V; U (max.) recommended = 8 V; U (OFF) = 5,7 V; I (OFF) = 7 m (6) Values for L + protection. option Low (LP) FSIS 8 00,6 0 0 LIS 0 00,6 0 0 Ultra low (UP) PISIS ,9 0 0 (7) : 0V - Not available SRIS LTRIL ONNTIONS connection TNK /4" NPT threaded cable entry. nclosures are supplied without cable gland LIS Spade plug connector with cable gland N (ISO 4400) for cables with an outer diameter from 6 to 8 mm FS, FSIS, PIS, PISIS Spade plug connector with cable gland IN 4650, 9,4 mm, form, for cables with an outer diameter from 4 to 6 mm FVT Spade plug connector, IN 4650, 9,4 mm, form, pre-wired connector length m FSZN Straight M connector with moulded-in cable, standard length 5 m FL Moulded-in flying lead, standard length 0, m ITIONL OPTIONS TPL numbers: TPL 0665: Piezotronic, PISIS, HV ( mw); TPL 0666: Piezotronic, PISIS, 4 HV (5 mw) TPL 0674: L and protection, FS, only available in 4 V / and 5 V - dd 0,5 W () and 0,4 W/V () Other pipe threads are available on request INSTLLTION Installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation o not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 6508 Functional Safety (Suffix SL), allowable temperature range: -40 to +60. Probability of failure on demand, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the valve if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 = NPT (NSI.0.); G = G (ISO 8/) x d ( "TNK") enclosure is provided with a /4" NPT threaded entry hole [optionally, /" NPT ( "T") or M0 x,5 ( "T")] and is supplied without cable gland Valves with suffix "SL" are provided with specific exhaust protectors ll leaflets are available on: G-0/R0

18 SRIS IMNSIONS (mm), WIGHT (kg) Types 0 and 0 Series 55 Types 0 to 0 Series 55 Types 0 to 0 Series x /4 7,5 48,5,9 45 = = x /8 (55) - / (55) 78,5 6 40, 45 49,4 x G/4,8,55 TYP 0: TNK Light alloy, cataphorese black painting N and N 64- TYP 0: LIS luminium I 5 / N /6 and N/I MS / 06MS 5505MS / 06MS 5505MS / 06MS G/8 /4 NPT / / / , 9,5 6,5 4 09,5 8 7,5 = =, 75,6 (55) 74,6 (55) 4,5 6 7,4 (55) 9,4 (55) mounting holes dia. 5, mm Spotfacing: dia. 9 mm, depth 5 mm mounting holes dia. 6,5 mm Spotfacing: dia. mm, depth 6 mm 5,5 64, ,5 TYP 0: FS 0 pilot Polyarylamide I 5 / IN / MS / 55505MO / 506MS / 506MO / 505MS / 505MO / 506 / 506MS / 506MO / 505MS / 505MO / 506 / 506MS / 506MO ll leaflets are available on: G-0/R0

19 80 SRIS IMNSIONS (mm), WIGHT (kg) TYP 04: FVT 0 pilot Polyarylamide I 5 / connection M + L and protection / MS / 55505MO / 506MS / 506MO / 505MS / 505MO / 506 / 506MS / 506MO / 505MS / 505MO / 506 / 506MS / 506MO 49, TYP 06: PIS / PISIS Piezotronic pilot Polyamide I 5 / IN 4650 N /6 and N MO / 55506MO 55505MO / 506MO 55505MO / 506MO TYP 07: FSZN 0 pilot Polyarylamide I 5 / IN 4650, cable m N and N MO / 55506MO 55505MO / 506MO 55505MO / 506MO ll leaflets are available on: G-0/R

20 SRIS IMNSIONS (mm), WIGHT (kg) TYP 09: FSIS 0 pilot Polyarylamide I 5 / IN 4650 N/I /6 and N/I MO / 55506MO 55505MO / 506MO 55505MO / 506MO x d certified cable gland (on request) Three-core cable, length m 4 able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 90 increments, cable ø 6-8 mm 7 Screw type manual operator, suffix MS 8 Push type or screw type manual operator, suffix MO 9 xternal pilot air supply, /8 pipe 0 onnector rotatable by 90 increments, cable ø 6-7 mm Push type manual operator, suffix MO onnectable pilot exhaust port Non-connectable pilot exhaust port IMNSIONS (mm), WIGHT (kg) type option level 55 55/ / / / / 55 weight () monostable bistable TNK P 8 7, , ,7 - -,,97,87,86,05,95 0 LIS LP 64 04, ,5 45 7, - - 0,59,44,4 0,80,5,4 0 FS LP - 4, , - 7, - - 0,,0,00 0,8,8,08 04 FVT LP - 4, , - 7, - - 0,,0,00 0,8,8,08 06 PIS / PISIS UP - 4, , - 7, - - 0,,0,00 0,,8,08 07 FSZN LP - 4, , - 7, - - 0,4,8,08 0,54,4,4 09 FSIS LP - 4, , - 7, - - 0,4,,0 0,4,, () Including coil(s) and connector(s). SSORIS Ø Ø /8 /4 /8 / 4,5-4 exhaust protector (stainless steel) ll leaflets are available on: G-0/R

21 SRIS SSORIS SRI 55 Supply rail (supplied with seals and banjo bolts, without mounting brackets) () supply rail for "n" valves supply rail with isolation valves with mounting brackets () llows the isolation of one or more valves from the general pressure supply catalogue number supply rail catalogue number G /4 NPT /4 for "n" valves G /4 NPT (4) (4) vailable on request / series 55 number of valves type weight (kg) 0, mono/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 04, mono/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 06, mono/bistable 0,86/0,9,94/,8,4/,74,8/,,08/,46,6/,8,64/,8 07, mono/bistable 0,9/,/,4,5/,9,9/,,/,7,5/,,8/,5 08, mono/bistable,5/,65,6/,6,9/,77,46/,8,8/,79,0/4,0,57/4,8 09, mono/bistable 0,9/,0,/,46,54/,98,95/,4,6/,8,57/,4,88/,66 mounting brackets () series catalogue number () or () supply rail () mounting brackets (x) () () IMNSIONS (mm), WIGHT (kg) TYP See pages 5 to 0 G /8) ,5 97 6, ,5 87 6,5 4Ø 6, Supply rail with isolation valves This mounting arrangement allows valves to be mounted in the positions bellow. Not possible with supply rail and isolation valves Only with supply rail with isolation valves ll leaflets are available on: G-0/R0

22 SRIS ll leaflets are available on: PI G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 8005G-0/R0

23 SOLNOI VLVS solenoid air pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, /4 0 / Series 55 FTURS Solenoid pilot valve / N with flapper/nozzle technology for long service life Ultra low pilot (0,0 W) for use in potentially explosive atmospheres according to TX-irective 94/9/ type-examination certificate no.: LI 07 TX 6080 X Pilot associated to a series 55 valve with aluminium body for control of actuators in the pharmaceutical, fine chemical and process industries The pilot's intrinsic safe (x ia) protection allows it to be installed in hazardous zone or. It is compatible with all safety barrier brands xhaust ports of this spool valve connectable for better environmental protection The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) The solenoid valves satisfy all relevant irectives GNRL ifferential pressure Flow (Qv at 6 bar) - 8 bar [ bar = 00 kpa] 860 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, dry, filtered - 40 to + 60 NR (nitrile) + PUR (polyurethane) MTRILS IN ONTT WITH FLUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised nd cover (spring return) PT Pilot end covers luminium Spool valve internal parts Stainless steel, POM, aluminium Pilot housing PT reinforced (thermoplastic polyester) Pilot seals NR + VMQ (silicone) P RP-MP LP UP 0,0W Not available Not available Not available Ultra Low Low Reduced and Medium asic SPIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) min. air ( ) level optional solenoids TX / Ix x ia POWR LVLS - cold electrical holding values (watt) basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= TPV Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5-8 UP - m Solenoid air pilot operated and return (bistable) /4 6 0,75,5-8 UP - m Select 8 for NPT NSI.0. or select G for ISO G (8/) m vailable feature in only - Not available ll leaflets are available on: G-0/R0

24 SRIS 55 PRFIX TL level description UP LP RP P Solenoid (pilot) interface T P V Intrinsically safe with pilot 95000, TX (N 60079) * m PROUT SLTION GUI STP Select the fluid temperature range and seal material from the general table on page. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications tables on page. xample : G5569 STP Select (combination). Select the appropriate operator from the tables on page. Select for this operator in the electrical characteristics table on page : the level (UP), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample : TPV STP Select voltage. Refer to standard voltages on page. xample : 6..40V / STP 4 Final catalogue / ordering number. xample : TPVG V / OPTIONS & SSORIS exhaust protector pipe series (stainless steel) fitting with inlet filter 0, mm and seal (G) (NPT) (G) 55 / Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only - Not available * TX solenoids are also approved to N 46- (non electrical valves) ORRING XMPLS: TPV G V / TPV V / voltage pipe thread TPL basic number suffix ll leaflets are available on: G-0/R0

25 SRIS 55 XPLNTION OF TMPRTUR RNGS OF SOLNOI VLVS Valve temperature range Operator ambient temperature range Total temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class lectrical safety I 5 Voltage range (=) TPV : 6 to 40 V ratings operator electrical ambient replacement coil inrush holding hot/ temperature enclosure cold safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (N 6059) - - type () Ultra low (UP) TPV () ,04/0,0-40 to +80/+50 II G x ia II T5/T6 moulded IP () Prefix TPV, U max. : 6 to 40 V ; Max. current consumption : I max. :,5 to 6,7 m; P max. : 40 to 70 mw 8080 Ω at +80 Internal resistance (Ω) 5000 Ω at +40 () safety parameters Refer to the dimensional drawings on page 4. U - Not available option I = () I I P I L I I (V) (m) (W) (µf) (mf) Ultra low (UP) TPV , LTRIL ONNTIONS connection TPV M0 cablegland for cables with an outer diameter from 5 to 9 mm ITIONL OPTIONS Other pipe threads are available on request INSTLLTION Installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation o not connect the pressure supply to the exhaust port. The "environmentally-protected" construction is not adapted for a "distributing" function It is recommended to protect the pilot with an inlet filter G /4, catalogue number It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the valve if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 = NPT (NSI.0.); G = G (ISO 8/) ll leaflets are available on: G-0/R0

26 SRIS 55 IMNSIONS (mm), WIGHT (kg) TYP 0: TPV luminium I 5 / ISO 4400 N ,5,8 9 7,5 9 7,5 86,5 8 5, 76,4,9, ,4 5,,9 45 5, 76,4,55 able gland for unarmoured cable with 5 to 9 mm dia. sheath mounting holes dia. 5, mm Spotfacing: dia. 9 mm, depth 5 mm x /4 level weight () monostable type option bistable 0 FVT UP 0,47 0,75 () Without cable. SSORIS Ø Ø - - /4 - - / exhaust protector (stainless steel) ll leaflets are available on: Ø Ø fitting with inlet filter 00 mm and seal PI G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 8005G-0/R