FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm)

Transcription

1 FIELDBUS ELECTRONICS 580 Electronics (Series - : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) 580 Fieldbus - Electronics Made Easy! Innovative Graphic Display is used for easy commissioning, visual status & diagnostics new Series 580 Commissioning Capabilities Set network address (including IP & Subnet mask for Ethernet) Set baud rate Set brightness Set factory defaults Visual Diagnostics Shorted and open load detection Shorted sensor/cable detection Low & missing power detection Self-tests activation Log of network errors Graphic Display for configuration & diagnostics 580 Fieldbus Communications Electronics Why use Numatics Fieldbus communication electronics? Modular Reality... No internal wiring simplifies assembly Power connector allows output power to be removed while inputs and communication are left active IP65 protection 32 valve solenoids per manifold (32 coils) Supported Protocols Compact Electronic Module F DeviceNet Ethernet PROFIBUS -DP PROFINET EtherCAT EtherNET/IP DLR U L DeviceNet TM is a trademark of ODVA. ControlNet is a trademark of ControlNet International, Ltd. PROFIBUS and PROFINET are registered trademarks of Profibus International. EtherCAT is a registered trademark of Beckhoff Automation GmbH. series usable for ATEX P579-1

2 P Manifold assemblies kit (Electronic + End plate) G A V 8 B V A00 FIELDBUS ELECTRONICS - SERIES 580 G = ISO 228/1 A00 = Standard (no options) 8 = NPT (contact us) MUF = Muffler in End Plates K = Push-in connectors DRM = DIN Rail Mount DWM = IN Rail Mount with Muffler 14X = External pilot supply from port 14 D12 = External pilot supply from port 14 (11 mm valve) and Muffler in End Plates (26 mm valve) D14 = External pilot supply from port 14 and DIN Rail Mount A = Initial release F06 = External pilot supply from port 14 Muffler in End Plates and DIN Rail Mount Product type V = Valve Manifold Assembly End Plate Style V = Vertical Electronics ATEX options ( only) 8 = 580 Fieldbus Electronics 2-22 (3GD) IP65X 2-22 (3GD) IP54X 2 (3G) IP54X A36 = A00 A41 = A00 A43 = A00 D36 = DRM D41 = DRM D43 = DRM D38 = 14X D42 = 14X D44 = 14X F16 = D14 F18 = D14 F19 = D14 End Plate Port Size (1-3-5) : Used with the first digit «G» or «8»: 1 = 1/8 (female thread only) Used with the first digit «K»: H = 6 x 8 mm (push-in connector) Number of Valve Stations : Used with the first digit «G» or «8» or «K»: B = 2 L = 12 V = 22 7 = 32 D = 4 T = 20 (ATEX : 20 maxi) 3 = 3/8 (manifold base) D = 4 N = 14 X = 24 H = 8 X = 24 (female thread or push-in connector) F = 6 P = 16 Z = 26 L = 12 3 = 28 Used with the first digit «K»: H = 8 R = 18 3 = 28 P = 16 7 = 32 K = 8 x 10 mm (push-in connector) J = 10 T = 20 5 = 30 M = 10 x 12 mm (push-in connector) (580/ATEX) bobines maxi (1) (1) Maxi sous tension en même temps, en fonction du nombre de module d entrée Electronics P 580 A E DN A Fieldbus Electronics A00 = Standard (no options) DRM = DIN Rail Mount ATEX options ( only) 2-22 (3GD) IP65X 2-22 (3GD) IP54X 2 (3G) IP54X A36 = A00 A41 = A00 A43 = A00 D36 = DRM D41 = DRM D43 = DRM Connector Type A = Initial release 1 = M12 Connector (push-in connector) Actuation E = Electronics Protocol DN1 = DeviceNet EC1 = EtherCAT ED1 = EtherNet/IP DLR EP1 = EtherNet/IP PN1 = PROFINET PT1 = PROFIBUS-DP DS4 = SUB-BUS! No usable for ATEX

3 R = Pad mount Valves R A 2 B 4 0 M A00 F1 Voltage - class F1 = 24 V DC - class F (11 mm valve) A00 = With impulse manual operator 11B = With maintained manual operator 11M = Without manual operator ATEX options A = Initial release 71W = With impulse manual operator 82L = With maintained manual operator 84A = Without manual operator Actuation Electrical interface 2 = Rubber packed M = Plug-in (with LED indicator / DC) Valve type B = Solenoid pilot (With impulse manual operator) Function A = 2x3/2 NO, dual 3-way D = 2x3/2 NC, dual 3-way N = 5/2, Differential air return 1 = 5/2, spring return 4 = 5/2, solenoid air return 5 = 5/3, W3, open center to exhaust 6 = 5/3, W1, center closed 7 = 5/3, W2, open center to pressure R = Pad mount R A 2 B 4 0 M A00 F1 Port connection 0 = No port size Voltage - class F1 = 24 V DC - class F F (26 mm valve) Plug-in valves (External piloting) (1) A00 = Standard (No option) With impulse manual operator 11B = With maintained manual operator A = Initial release 11M = Without manual operator 14B = Internal pilot supply from port 1 Actuation 83B = 10 b max. pressure - non UL certified 1 = Spool and sleeve 81G = 11B + 14B 2 = Rubber packed 82M = 11B + 83B 82N = 11M + 83B Valve type 82K = 11M + 14B B = Solenoid pilot (With impulse manual operator) 82P = 14B + 83B 69N = 14B + 11M + 83B 69P = 14B + 11B + 83B Function A = 2x3/2 NO, dual 3-way (1) Electrical interface D = 2x3/2 NC, dual 3-way (1) M = Plug-in (with LED indicator / DC) N = 5/2, Differential air return (1) 1 = 5/2, spring return 4 = 5/2, solenoid air return Port connection 5 = 5/3, W3, open center to exhaust (1) 0 = No port size 6 = 5/3, W1, center closed (1) 7 = 5/3, W2, open center to pressure (1) (1) Only with rubber packed version. (1) Used external spool valves (internal/external supply configurated in the end plate kits). For internal piloting, contact us. P579-3

4 H = Metric thread K = Push-in connectors Subbase H A M S4 B M A Not use Interface 1 = High flow (11 mm valve) A00 = Standard (No option) ATEX options A = Initial release 71W = Standard (zone 2 or zones 2-22) Product type M = Manifold base Z = Mid station supply Mounting S4 = Manifold base, 4 stations, side port, single Z-Board M4 = Manifold base, 4 stations, side port, double Z-Board Wiring option M = Plug-in Port connection B = M7 (female thread only) D = 2,7 x 4 mm (5/32) [push-in connector only] (Mid station supply not available) F = 4 x 6 mm [push-in connector only] G A M V2 2 M A Not use G = ISO 228/1 8 = NPT (contact us) Interface K = Push-in connectors 1 = Pneumatic high flow 2 = ISO (26 mm) (26 mm valve) A00 = Standard (internal pilot) 14X = External pilot supply from port 14 56Y = 4-pin straight M12 connector in mounting A = Initial release Standard (internal pilot) 59W = External pilot supply from port pin straight M12 connector in mounting Product type M = Manifold base Z = Mid station supply P579-4 Wiring option M = Plug-in Mounting Port connection (2-4) S2 = Manifold base, 2 stations, side port, single Z-Board Used with the first digit «G» or «8»: M2 = Manifold base, 2 stations, side port, double Z-Board 2 = 1/4 V2 = Manifold base, 2 stations, side port NJ = Manifold base, 2 stations, side port, single Z-Board Zoned Power, Second station Used with the first digit «K»: H = 6 x 8 mm [push-in connector only] NK = Manifold base, 2 stations, side port, single Z-Board K = 8 x 10 mm [push-in connector only] Zoned Power & Pilot, Second station NL = Manifold base, 2 stations, side port, double Z-Board, Zoned Power, Second station NM = Manifold base, 2 stations, side port, double Z-Board, Zoned Power & Pilot, Second station NN = Manifold base, 2 stations, side port, single Z-Board, Zoned Power, First station NP = Manifold base, 2 stations, side port, single Z-Board, Zoned Power & Pilot, First station NQ = Manifold base, 2 stations, side port, single Z-Board, Zoned Power, First station, Zoned Pilot Second Station NR = Manifold base, 2 stations, side port, double Z-Board, Zoned Power, First station, Zoned Pilot Second Station NS = Manifold base, 2 stations, side port, single Z-Board, Zoned Pilot Second Station NT = Manifold base, 2 stations, side port, double Z-Board, Zoned Pilot Second Station

5 Sandwich shut off block Used to shut-off pressure to the valve which is mounted above it. Allows easy maintenance without the need to shut-off pressure to the whole manifold. series series (14)(5) (4) (1) (2) (3)(12) 26,5 EB B P A EA XE (3) (2) (1) (4) (5) X 22 (14)(5) (4) (1) (2) (3)(12) XE (3) (2) (1) (4) (5) X EB B P A EA 91,35 23,35 157,3 26,5 109,2! Usable only for internal pilot supply island RAY Sandwich shut off block (double) 0,11! Usable only for internal pilot supply island RAY High Flow - Sandwich shut off block RAY ISO Sandwich shut off block 0,24 HOW TO ORDER [ATEX options (zone 2 or zones 2-22)] Consult our Dynamic Product Modeling Tool on: No ATEX version for Sandwich speed control kit (14) (12) F (4) (2) (5) (1) (3) ,6 series series (14) (12) (4) (2) (5) (1) (3) 14, ,25 61,25 RAS Sandwich Speed Control 0, RAS RAS ! No ATEX version for 142 High Flow - Sandwich Speed Control ISO Sandwich Speed Control 0,25 33 P579-5

6 Ordering Valve Manifold Assemblies with 580 Electronics For valves series and ( shown) Shaded components are described by the manifold assembly number (see page 2). The communication module and number of I/O modules is described by the Electronic Interface model number designation (see page 2). Each valve station is listed in sequential order from left to right when facing the port side of the manifold as shown. NOTE: 1. A total of 32 solenoid outputs are available. Either 32 single solenoid valves or 16 double solenoid valves or any combination of singles and doubles not to exceed 32 outputs can be specified. Example Order - shown Assembly Kit 8AV8H100VMUF Valve Station #1 RA2B40MA00F1 Valve Station #2 RA2B40MA00F1 Mounting # 1 8AMM22MA0010 Valve Station #3 RA2B40MA00F1 Valve Station #4 RA2B40MA00F1 Mounting # 2 8AMM22MA0010 Valve Station #3 RA2B40MA00F1 Valve Station #4 RA2B40MA00F1 Mounting # 2 8AMM22MA0010 Valve Station #3 RA2B40MA00F1 Valve Station #4 RA2B40MA00F1 Mounting # 2 8AMM22MA0010 Electronics P580AEDN1010A00 P579-6