Mechanically actuated valves

Manually actuated valves

Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever

COILS, CONNECTORS, SOLENOID VALVES

COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...

10 mm solenoid valves on manifold with multiconnection D-SUB

0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical

MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME

MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate

121 1/8 NPT Solenoid and pneumatic valves size 0,86 in

121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available

C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5

CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil

121 1/8 NPT. Line. Manual and mechanical valves size 0,86 in

121 1/8 NPT Manual and mechanical valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available

Art. B - SHUTTER GLOBE VALVE

2. DATA SHEETS Art. B - SHUTTER GLOBE VALVE It is not subject to the Water Hammer if the fluid pass through the valve in the direction of the arrow printed on the body (under the shutter). With these conditions

Complete Range of Movement Solutions

Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders

seriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1

seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes

5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm

> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series

Valves and Solenoid valves Series E 2/

CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly

Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissi

SERIES B VALVES AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 Two-Way Types for bleeding pilots of larger valves, for bleeding cylinders or small pressure systems, operating air tools or motors, opening

INTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354

INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,

series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK

DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV

ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated

ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for

Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)

Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical

MANUALLY AND MECHANICALLY OPERATED VALVES Product Index

MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually

Vannes à commande pneumatique pneumatically piloted valves

Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples

B1 VALVES SERIES 70 DISTRIBUTORS B1.12

VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,

Gross Automation (877)

Limit Switches Carlo Gavazzi broadens its leading range of products for the industrial automation world, with the new and complete range of mechanical limit and safety switches. These robust switches provide

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

F NI/min. (G1/8), 1600 NI/min. (G1/4), 4600 NI/min.

Series AC Univer : Threaded and Solenoid, Mixed 5/; G/8", /" and /" Diecast aluminum Body 55 psi Operating pressure F Ambient temperature ABOUT UNIVER SERIES AC The "Mixed" system, which has been produced

Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)

Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

GENERAL PURPOSE. 3 Port 1/8 Pilot Valves Two Hands Safety Valve BC 1/4 Body Ported Valves : Mechanically Operated...

GENERAL PURPOSE 3 Port 1/8 Pilot Valves.........................19 Two Hands Safety Valve....................... 199 BC 1/ Body Ported Valves :.................... 00 Mechanically Operated.................

Transmitters: Relay Valve VR4151/4152

Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2

Series 77. Miniature 3/2 Valves PUSH BUTTON TOGGLE LEVER SPRING RETURN WITH DETENT ONE WAY ROLLER ROLLER AIR PILOT FINGER BUTTON BALL PLUNGER

Miniature 3/2 Valves TOGGLE LEVER 77.1130 1/8 77.1131 1/8 ROLLER ONE WAY ROLLER - N/O or N/C application - Aluminum alloy 125 PSI -10 C to 60 C (14 F to 140 F) 77.1132 1/8 77.1133 1/8 BALL PLUNGER AIR

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

Series PD directly operated solenoid valves

> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current

3/2-way Solenoid Valve for pneumatics

656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).

> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System

Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port

Control Valves & Valve Accessories

Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark

VALVES SERIES 70 DISTRIBUTORS

VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA

CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL

CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L

CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI

Quick-release couplings Series 5000

CATALOGUE > Release 8. > Quick-release couplings Series 5000 Quick-release couplings Series 5000 Nominal diameter ø 5 and 7 mm - Plastic tubes 6/, 8/6, 10/8 Rubber hoses 6x1, 8x17, 10x19, 13x23 Connections

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

DP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /

DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal

Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.

Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported

Series 28 High-Pressure Spring-Loaded Regulator

Description Series 28 is a range of spring-loaded regulators that provide a flow of gas or liquid at controlled. The outlet is substantially unaffected by flow rate but it does drop slightly as the inlet

Series PD directly operated solenoid valves

> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate

STC Solenoid Valve List Price

STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4

3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics

65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space

Chapter 11: Valves and Actuators with the NAMUR-interface

Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves

Valves for Panel Mounting

2.2 page 31 2.2 Valves for Panel Mounting Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.14. Selected models

VALVES ISO 5599/1, SERIES IPV-ISV

VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed

Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve

Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................

B SERIES. Bulletin B-2017

Bulletin B-207 B SERIES Versa Product Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0762 USA Phone: (20) 4-2400 Fax: (20) 4-29 Versa BV, Prins Willem Alexanderlaan 427, 72 GB Apeldoorn, The Netherlands

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.

60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by

Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2

Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2 Valves series "EK" are produced in the, and pneumatic functions; the kind of construction is based on a balancee! spool. In the mechanically

INTEGRATED HYDRAULIC BRAKE

INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The

NAMUR Technical details

Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

Lockable isolation 3/2-way valves Series MX 3/

CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and

Angle Seat Valve /2" up to 3"

1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure

Valve Islands Series F

CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed

Specifications Fluid. 5 to 60 C (No freezing) Effective area. Basic Roller lever. Mechanical operation. One way roller lever.

Rubber Seal Compact design, large flow capacity 18 mm 2 High cycle rate, long life/300 c.p.m. or less Piping possible to any EXH port. Proper countermeasures can be taken for applications in which the

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3

Multi-Stage Air Powered Vacuum Pumps

Multi-Stage Powered Pumps The MSP Series Multi-Stage Pneumatically-Driven Pumps operate on the Venturi Principle. These pumps are designed for applications requiring high flows at moderate vacuum levels.

PROCESS & AUTOMATED VALVES

Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level

STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE

FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure

2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.

General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation

4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4" to 2" NPT. Features.

qwer General Service Valves Brass or Stainless Steel Bodies 1/" to 2" NPT 2/2 3/2 /2 SERIES Features Unique sealing member isolates pilot air pressure from mainline fluid. Variations in pilot air pressure

SELECTION CHARTS 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust 112

SELECTION CHARTS 4-Way s Flow @ 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust TV-4D Spool 7.5 scfm #10-32 #10-32 holes in body D 126 TV-4D-M5 Spool 180 l/min M5 M5 holes in body D 126 TV-4M

valvole 16 mm ad azionamento pneumatico

valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:

CABINET MOUNTING. 501 series

CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel

Expertise from a single source Media valves in factory automation

Expertise from a single source Media valves in factory automation Take advantage of our know-how... in fluid control too! Your core field is factory automation. But in many automated manufacturing processes,

2/2 and 3/2-way ball valve with pneumatic rotary actuator

2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

Type TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread

Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection

Poppet valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2

Poppet valves manually and mechanically actuated - - DESCRIPTION Valves series "CA" are produced in the /2, /, and 5/ pneumatic functions. The poppet kind of construction and the very rugged control allow

[Vacuum valves and solenoid valves] 4

Angle Seat Valve 7010

Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

MONOBLOCK DIRECTIONAL CONTROL VALVES

MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL

SOLENOID VALVES AND PNEUMATIC VALVES

A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly

BRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE

FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.

Valves, Fittings, and Manifolds Catalog. We make things MOVE

Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are

Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves

Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components

ZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29

ZCK-Y39 ZCK-Y43 ZCK-Y49 ZCK-Y41 ZCK-D239 ZCK-D23 ZCK-D59 ZCK-Y55 ZCK-Y54 ZCK-Y59 ZCK-D219 ZCK-D21 ZCK-D81 ZCK-D91 ZCK-Y91 ZCK-Y31 ZCK-Y33 ZCK-Y34 ZCK-Y81 ZCK-D029 ZCK-D02 ZCK-D05 ZCK-D109 ZCK-D41 ZCK-D06

Limit Switches - Limit Type Plastic Body IP65

Limit Switches - Limit Type Plastic Body IP65 Double Insulation Degree of protection IP65 Reinforced UL-V thermoplastic fiber-glass body Positive Opening Operation Minimum Actuation Force/Torque Minimum

2/2 or 3/2 way ball valve with pneumatic rotary actuator

2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

AP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS

AP1000-2000 Airpower positioners are a robust range of rotary or linear valve positioners in AP1000 electro-pneumatic (4-20mA), AP1200 pneumatic (3-15 psi) or AP2000 programmable smart type. Designed to

1/8 NPT (F) 1/8 NPT (F)

Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing

Rapid push-in fittings for plastic tubes Series 1000

CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,

Bus / Coach Door Obstruction Detection

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Bus / Coach Door Obstruction Detection Bulletin 0600-B78 Door Sensing

valvole ad azionamento pneumatico

Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,

3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT

3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator