188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c

Transcription

1 The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold design saves space and reduces assembly time. Low power consumption. LED and electrical protection comes standard. Manual override. onstruction Body Diaphragm Internal Parts Manifold Electrical Standard Voltages Power onsumption Duty ycle Rating oil Insulation Ambient Temperature Electrical onnection Protection Rating Valve Valve Parts in ontact with Fluids onnectors sold separately (see next page) Response Time Fluid Temperature Specifications - Valve only Ports Orifice Size (ins.) Manifold Mount: Polyamide (PA), In-line: Brass Nitrile (NBR) Brass & Stainless Steel Anodized Aluminum 12 VD or 24 VD 1 Watt ontinuous lass F 41 F to 122 F (5 to 50 ) lip type with lead wires, LED and diode protection. IP40 Approx. 6 ms on, 8 ms off 41 F to 122 F (5 to 50 ) Solenoid Valves Assembled to Manifolds # of Valves at. No. # of Valves at. No. # of Valves at. No. In-Line Version v Flow Factor Min. Max. Gases General Service 3 Way Micro Solenoid Valve M3 and M5 Porting, In-line or Manifold Mount Differential Pressure (psi) Max. Liquids atalog Numbers Power (Watts) M Manifold Mount Version - Normally losed Manifold Mount Version - Normally Open ) N NO Weight (oz)

2 188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative configurations) Total No. of atalog Length Weight Valves Number L1 L2 (oz) A - Blanking Plate, atalog # The connectors should be ordered separately. onnectors with 2 lead wires Length atalog Number 0.5m m m [8].409 [10.4].787 [20] [10.5] L2 L1 M5 (x 4) A.14 (3.50) (2X) Manifold Mount Version 1.31 [33.2] 1.06 [27.00].984 [25].512 [13].197 [5].14 [3.5].33 [8.3].18 [4.5] [10] [10.5] [12.0] [12.6].256 [6.5] [40.90].984 [25].394 [10.0] Ø [1.90 (2x)] Mounting Screws (supplied with valve).197 [5] [33] 48

3 The 302 is a 3 Way, 15 mm wide, manifold mount solenoid valve designed to control the flow of air or inert gases to small cylinders or actuators. The 302 offers the following benefits: ompact 15 mm, manifold design saves space and reduces assembly time. Low power consumption (0.5W). Built-in LED for indication of electrical operation. Built-in surge suppression to protect sensitive equipment. Manual operator for testing and troubleshooting. onstruction Body Seals Internal Solenoid omponents Manifold Interface Seal Electrical Standard Voltage Power onsumption Duty ycle Rating oil Insulation Ambient Temperature Electrical onnection DIN onnector Protection Rating Valve Fluid Temperature 0.5 & 2.0 Watt oil 1.0 Watt oil Suitable Media Response Time Manifold Mounting Manual Operators Valve Parts in ontact with Fluids IXEF (polyarylamide) NBR, FKM POM, PET, stainless steel, brass Hytrel 5, 12, 24, 48- VD +10%, -15% (Leaded version availble in 24 VD only. A voltages available upon request) 0.5, 1.0, 2.0 Watts (Nominal ratings without LED and surge suppression. Add 0.15W for versions with LED and surge suppression) ontinuous lass F See ambient temperature table. AMP 2.8 x 0.5 with 9.4 mm spacing ISO 15217/DIN " Lead wires Size 9.4 mm, Form (supplied with valve) IP65 with DIN Plug onnector 14 F to 104 F (-10 to 40 ) -13 F to 104 F (-25 to 40 ) Air or inert gases filtered at 50µm, lubricated or not lubricated 8-15 ms open or close NOMO, 15 mm wide Momentary push in and hold Maintained screw type General Service 3 Way Miniature Solenoid Valves 15 mm wide, Manifold Mount onstruction Standard Mounting ) Pneumo - Electric Mounting (available on request) Ambient Temperature Ratings Single Valve Power Version or 15mm space between valves Valves stacked side by side 0.5 W Standard 14 F to 122 F 14 F to 122 F 0.65 W LED/Surge 14 F to 122 F 14 F to 122 F 1.0 W Standard -13 F to 140 F -13 F to 140 F 1.15 W LED/Surge -13 F to 140 F -13 F to 140 F 2.0 W Standard 14 F to 122 F 14 F to 104 F 2.15 W LED/Surge 14 F to 104 F - N

4 302 Specifications Leaded oil with LED & Surge Suppression Orifice Size (ins.) v Flow Factor Operating Pressure Differential Min. Max. DIN & AMP Spade Terminal oils v Flow Factor Operating Pressure Differential atalog Number Orifice Size (ins.) Min. Max. Momentary Manual Operator Sustained Manual Operator onstr. Ref. Power (Watts) Weight (oz.) X106--P 3021X107--P X109--P 3021X110--P X112--P 3021X113--P X118--P 3021X119--P X121--P 3021X122--P X124--P 3021X125--P X127--P 3021X128--P X atalog Number Sustained Momentary Manual Manual Operator Operator 0 connector ISO 15217/DIN connector AMP 2.8x0.5, 9.4 mm spacing onstr. Ref. 4 connector ISO 15217/DIN LED/Surge 5 connector AMP 2.8x0.5, 9.4 mm spacing + LED/Surge Power (Watts) Weight (oz.)

5 Dimensions: Inches [mm] onstr. Ref [47] 4.18 [4.5].78 [20].88 [22.5] [8.2] 1) 2 electrical supply wires, length: 12 2) Manual Operator 3) 2 Mounting screw M3 x 20 (supplied) 4) Seal (supplied) onstr. Ref [56] 1.85 [47] 1.61 [41] 4.18 [4.5] [20] 1.97 [50] *.32 [8.2].38 [9.7].59 [15].38 [9.7].59 [15] 1) Standard connector, M6 (Pg 7P) (Supplied) 2) Manual Operator 3) 2 Mounting screw M3 x 20 4) Seal (supplied) 5) Version with LED and electrical proection * + 10mm for connector clearence 90 1 Exhaust [3] Outlet [2] Pressure [1] Exhaust (3) Outlet (2) Pressure (1) Manifold Machining.15 [3.8].12 [3.8].12 [3].15 [3.8].12 [3.8].12 [3].38 [9.7].59[15].38 [9.7].59[15].32 [8.2] Manifold Machining.32 [8.2] 3 Holes ø.079 [2.0] 2 Holes ø.138 [3.5] 3 Holes ø.079 [2.0] 2 Holes ø.138 [3.5]

6 2/2 407 General Service 2 and 3 Way Micro Solenoid Valves Bib Porting, lip Mount Only 1/2" in diameter the 407 valves are suitable for a wide range of OEM applications where small size, low power, and light weight are required. orrosion resistant materials of construction. Bib porting for use with 1/16 soft tubing. Magnetic latching construction available to maintain valve position with loss of power, eliminate coil heat rise and extend battery life. onstruction Body Disc Gaskets Bobbin/oreTube ore and Plugnut Springs Electrical Valve Alternative onstructions Valve Parts in ontact with Fluids POM NBR or FKM NBR or FKM Many alternative constructions are available and include a variety of voltages, electrical connectors and materials of construction. ASO Scientific can also custom design a valve for your specific application. ontact your local ASO sales office for more information. PPS 400 Stainless Steel 300 Stainless Steel Standard Voltages 6, 12, 24 VD+ 10%, -5% Power onsumption Duty ycle Rating oil Insulation Electrical onnection Response Time ~4 ms at rated voltage Watts (10 watts for latching version) ontinuous (Intermittent for latching version) 266 F (130 ) 26 gage lead wire Internal Volume 2 Way N = 90µL, 2 Way NO = 110µL, 3 Way = 120µL Mounting Bracket Optional mounting clip, pin S188-3 (see drawing) Options Oxygen service construction available Lubricant free construction available Temperature Range: Ambient & Media: 32 F to 77 F (0 to 25 ) continuous duty up to 104 F (40 ) intermittent duty Approvals: ) Meets applicable E directives. 2N 2NO 3U NO N NO N 52

7 Specificatons Ports Orifice Size (ins.) v Flow Factor Maximum Pressure (psi) atalog Number 2 WAY NORMALLY LOSED (losed when de-energized) atalog Number Description and Options xx 100 N L O Base atalog Number To onstruct atalog Number Examples Voltage - 06 (D) - 12 (D) - 24 (D) Base atalog Number (2nd Part) Select base catalog number Insert voltage into the 7 th and 8 th digits denoted by "xx" Insert N (NBR) or V (FKM) into 12 th digit to select seal material Add suffix for optional features to end of base catalog number Latching Suffix Watt 20 Options Suffix O = No Lubricant K = Oxygen Service onstruction PBT Valve Body, PPS Bobbin, FKM Seals, PFPE lubricant N = 2 Way Normally losed valve with 0.040" orifice, 100 psig maximum pressure rating, and 24 VD coil rated at 2.5 Watts VLO = 3 Way Latching valve with 0.040" and 0.038" orifices, 100 psig maximum pressure rating, 6 VD coil suitable for oxygen service Weight (oz.) Bibs for 1/16" ID Tubing xx100N Bibs for 1/16" ID Tubing xx050N WAY NORMALLY OPEN (Open when de-energized) Bibs for 1/16" ID Tubing xx100N Bibs for 1/16" ID Tubing xx050N WAY UNIVERSAL OPERATION (Pressure at any port) Bibs for 1/16" ID Tubing 0.040/ / xx100N Bibs for 1/16" ID Tubing 0.040/ / xx050N WAY LATHING Bibs for 1/16" ID Tubing xx100NL** 10*.67 Bibs for 1/16" ID Tubing xx100NL*** 10*.67 3 WAY LATHING Bibs for 1/16" ID Tubing 0.040/ / xx100NL 10*.67 Notes "xx" Denotes place in catalog number for voltage * Latching valves are designed for intermittent duty only. Wattage rating applies to ms duration required to actuate valve. Once switched no additional power is required to hold the valve in its position. ** Flow Path through body (between N and common ports) *** Flow Path between common port and NO port (top of valve) Seals N= NBR V= FKM 2/

8 2/2 407 Dimensions 2 and 3 way Standard Solenoid: Inches [mm] Dimensions 2 and 3 way Latching Solenoid: Inches [mm] Latching Wiring Diagram Latch ircuit Orange = 24 VD + Yellow = 12 VD Blue = 6 VD ommon Ground ( Black ) ( Brown ) UN-Latch ircuit

9 Only 1/2" in diameter the 407M valves are suitable for a wide range of OEM applications where small size, low power, and light weight are required. Manifold mount construction allows for easy assembly. orrosion resistant materials of construction Magnetic latching construction available to maintain valve position with loss of power, eliminate coil heat rise and extend battery life. onstruction Body Disc Gaskets Bobbin/oreTube ore and Plugnut Springs Electrical Valve Alternative onstructions Valve Parts in ontact with Fluids 300 Stainless Steel NBR or FKM NBR or FKM Many alternative constructions are available and include a variety of voltages, electrical connectors and materials of construction. ASO Scientific can also custom design a valve for your specific application. ontact your local ASO sales office for more information. PPS 400 Stainless Steel 300 Stainless Steel Standard Voltages 6, 12, 24 VD + 10%, -5% Power onsumption Duty ycle Rating oil Insulation Electrical onnection Response Time ~4 ms at rated voltage Internal Volume Options Watts (10 watts for latching version) ontinuous (Intermittent for latching version) 266 F (130 ) 26 gage lead wire 2 Way N = 70 µ, 2 Way NO = 100 µ, 3 Way = 110 µ Oxygen service construction available Lubricant free construction available General Service 2 and 3 Way Micro Solenoid Valves 6-32 UN Manifold Mount Temperature Range: Ambient & Media: 32 F to 77 F (0 to 25 ) continuous duty up to 104 F (40 ) intermittent duty Approvals: ) Meets applicable E directives. 2N 2NO 3U 2/2 407M N NO NO N 55

10 2/2 407M Specificatons Mounting Stud Orifice Size (ins.) v Flow Factor Maximum Pressure (psi) atalog Number 2 WAY NORMALLY LOSED (losed when de-energized) atalog Number Description and Options 407M34 xx 100 N L O Base atalog Number To onstruct atalog Number Examples Voltage - 06 (D) - 12 (D) - 24 (D) Base atalog Number (2nd Part) Select base catalog number Insert voltage into the 7 th and 8 th digits denoted by xx Insert N (NBR) or V (FKM) into 12 th digit to select seal material Add suffix for optional features to end of base catalog number Latching Suffix 407M N = 2 Way Normally losed valve with 0.040" orifice, 100 psig maximum pressure rating, and 24 VD coil rated at 2.5 Watts. 407M VLO = 3 Way Latching valve with 0.040" and 0.038" orifices, 100 psig maximum pressure rating, 6 VD coil suitable for oxygen service. Watt 20 #6-32 UN M14xx100N #6-32 UN M14xx050N WAY NORMALLY OPEN (Open when de-energized) #6-32 UN M24xx100N #6-32 UN M24xx050N WAY UNIVERSAL OPERATION (Pressure at any port) 2 WAY LATHING 3 WAY LATHING #6-32 UN 0.040/ / M34xx100N #6-32 UN 0.040/ / M34xx050N #6-32 UN M14xx100NL** 10*.7 #6-32 UN M24xx100NL*** 10*.7 #6-32 UN 0.040/ / M34xx100NL 10*.7 Weight (oz.) Notes "xx" Denotes place in catalog number for voltage * Latching valves are designed for intermittent duty only. Wattage rating applies to ms duration required to actuate valve. Once switched no additional power is required to hold the valve in its position. ** Flow Path through body (between N and common ports) *** Flow Path between common port and NO port (top of valve) Seals N= NBR V= FKM Options Suffix O = No Lubricant K = Oxygen Service onstruction 300 stainless steel body, PPS Bobbin,FKM Seals, PFPE lubricant 56

11 Dimensions 2 and 3 way Standard Solenoid: Inches [mm] Dimensions 2 and 3 way Latching Solenoid: Inches [mm] Latching Wiring Diagram Latch ircuit Orange = 24 VD Yellow = 12 VD Blue = 6 VD ommon Ground ( Black ) ( Brown ) UN-Latch ircuit /2 407M 57

12 2/2 AL General Service 2 and 3 Way Miniature Solenoid Valves UNF Porting, In-line Porting The AL Valves are suitable for a wide range of OEM applications where small size, low power and long life are a must. ycle life in the hundreds of millions. orrosion resistant materials of construction. In-line porting for use with standard metal or plastic #10-32 UNF fittings. Magnetic latching construction available to maintain valve position with loss of power, eliminate coil heat rise and extend battery life. onstruction Body Disc Gaskets Bobbin/oreTube ore and Plugnut Springs Electrical Standard Voltages Power onsumption Duty ycle Rating oil Insulation Electrical onnection Valve Response Time Alternative onstructions Valve Parts in ontact with Fluids POM or 300 Stainless Steel FKM FKM Many alternative constructions are available and include a variety of voltages, electrical connectors and materials of construction. ASO Scientific can also custom design a valve for your specific application. ontact your local ASO sales office for more information. PBT 400 Stainless Steel 300 Stainless Steel 6, 12, 24 VD+ 10%, -5% 115 VA (with rectifier in lead wires) Watts (10 watts for latching version) ontinuous (Intermittent for latching version) 266 F (130 ) 26 gage lead wire ~5 ms at rated voltage (2 watt coil) ~12 ms at rated voltage (0.65 watt coil) Internal Volume 2 Way N = 330 µl, 2 Way NO = 310 µl, 3 Way = 370 µl Mounting Bracket Optional mounting clip, pin (see drawing) Options Oxygen service construction available Lubricant free construction available Temperature Range: Ambient & Media: 32 F to 77 F (0 to 25 ) continuous duty up to 104 F (40 ) intermittent duty Approvals: ) Meets applicable E directives. 2N 2NO 3U NO N NO N 58

13 Specificatons Orifice Ports Size (ins.) v Flow Factor 2 WAY NORMALLY LOSED (losed when de-energized) atalog Number Description and Options To onstruct atalog Number Examples AL33 xx L O S Base atalog Number Voltage - 06 (D) - 12 (D) - 24 (D) - 115(A) Latching Suffix Maximum Pressure (psi) atalog Number Options Suffix A = A service (rectifier in lead wire) O = No Lubricant K = Oxygen Service onstruction PBT Valve Body, FKM Seals, PFPE lubricant Select base catalog number Insert voltage into the 5th, 6th, (and 7th when required), digits denoted by xx Add suffix for optional features to end of base catalog number Watt 20 #10-32 UNF AL11xx #10-32 UNF AL21xx #10-32 UNF AL31xx #10-32 UNF AL41xx WAY NORMALLY OPEN (Open when de-energized) #10-32 UNF AL12xx #10-32 UNF AL22xx #10-32 UNF AL32xx #10-32 UNF AL42xx WAY UNIVERSAL OPERATION (Pressure at any port) #10-32 UNF 0.025/ / AL13xx #10-32 UNF 0.055/ / AL23xx #10-32 UNF 0.055/ / AL33xx #10-32 UNF 0.090/ / AL43xx WAY LATHING #10-32 UNF AL11xxL 10* 1.8 #10-32 UNF AL31xxL 10* 1.8 #10-32 UNF AL41xxL 10* WAY LATHING #10-32 UNF 0.025/ / AL13xxL 10* 1.8 #10-32 UNF 0.055/ / AL33xxL 10* 1.8 #10-32 UNF 0.090/ / AL43xxL 10* 1.8 Weight (oz.) Notes "xx" Denotes place in catalog number for voltage, three characters may be used when required. * Latching valves are designed for intermittent duty only. Wattage rating applies to ms duration required to actuate valve. Once switched no additional power is required to hold the valve in its position. Optional Body Material S = 300 Stainless Steel AL1124 = 2 Way Normally losed valve with 0.025" orifice, 110 psig max pressure rating, and 24 VD coil rated at 0.65 watts. AL32115A = 2 Way Normally Open valve with 0.048" orifice, 100 psig max pressure rating, and 115 VA coil with rectifier. AL4306LK = 3 Way Latching valve with 0.090" and 0.078" orifices, 30 psig max pressure rating, 6 VD coil and suitable for oxygen service. 2/2 AL 59

14 2/2 AL Dimensions 2 and 3 way Standard Solenoid: Inches [mm] Dimensions 2 and 3 way Latching Solenoid: Inches [mm] [4.1] Latching Wiring Diagram Latch ircuit Orange = 24 VD + Yellow = 12 VD Blue = 6 VD ommon Ground ( Black ) ( Brown ) UN-Latch ircuit [4.1] - + [6.4] [6.4] 60

15 The AM Valves are suitable for a wide range of OEM applications where small size, low power and long life are a must. ycle life in the hundreds of millions. orrosion resistant materials of construction. Manifold mount construction allows for easy assembly. Magnetic latching construction available to maintain valve position with loss of power, eliminate coil heat rise and extend battery life. onstruction Body Disc Gaskets Bobbin/oreTube ore and Plugnut Springs Electrical Standard Voltages Power onsumption Duty ycle Rating oil Insulation Electrical onnection Valve Response time Alternative onstructions Valve Parts in ontact with Fluids POM/300 Stainless Steel or all 300 Stainless Steel FKM FKM Many alternative constructions are available and include a variety of voltages, electrical connectors and materials of construction. ASO Scientific can also custom design a valve for your specific application. ontact your local ASO sales office for more information. PBT 400 Stainless Steel 300 Stainless Steel 6, 12, 24 VD+ 10%, -5% 115 VA (with rectifier in lead wires) Watts (10 watts for latching version) ontinuous (Intermittent for latching version) 266 F (130 ) 26 gage lead wire ~5 ms at rated voltage (2 watt coil) ~12 ms at rated voltage (0.65 watt coil) Internal Volume 2 Way N = 360 µl, 2 Way NO = 400 µl, 3 Way = 400 µl Options Oxygen service construction available Lubricant free construction available General Service 2 and 3 Way Miniature Solenoid Valves UNF Manifold Mount Temperature Range: Ambient & Media: 32 F to 77 F (0 to 25 ) continuous duty up to 104 F (40 ) intermittent duty Approvals: ) Meets applicable E directives. 2N 2NO 3U 2/2 AM N NO NO N 61

16 2/2 AM Specificatons Orifice Mounting Stud Size (ins.) v Flow Factor 2 WAY NORMALLY LOSED (losed when de-energized) atalog Number Description and Options AM33 xx L O S Base atalog Number Voltage - 06 (D) - 12 (D) - 24 (D) - 115(A) Latching Suffix Maximum Pressure (psi) Options Suffix A = A service (rectifier in lead wire) O = No Lubricant K = Oxygen Service onstruction PBT Valve Body, FKM Seals, PFPE lubricant To onstruct atalog Number Select base catalog number Insert voltage into the 5 th, 6 th, (and 7 th when required), digits denoted by xx Add suffix for optional features to end of base catalog number atalog Number Watt 20 #10-32 UNF AM11xx #10-32 UNF AM21xx #10-32 UNF AM31xx #10-32 UNF AM41xx WAY NORMALLY OPEN (Open when de-energized) #10-32 UNF AM12xx #10-32 UNF AM22xx #10-32 UNF AM32xx #10-32 UNF AM42xx WAY UNIVERSAL OPERATION (Pressure at any port) #10-32 UNF 0.025/ / AM13xx #10-32 UNF 0.055/ / AM23xx #10-32 UNF 0.055/ / AM33xx #10-32 UNF 0.090/ / AM43xx WAY LATHING #10-32 UNF AM11xxL 10* 1.8 #10-32 UNF AM31xxL 10* 1.8 #10-32 UNF AM41xxL 10* WAY LATHING #10-32 UNF 0.025/ / AM13xxL 10* 1.8 #10-32 UNF 0.055/ / AM33xxL 10* 1.8 #10-32 UNF 0.090/ / AM43xxL 10* 1.8 Weight (oz.) Notes "xx" Denotes place in catalog number for voltage, three characters may be used when required. * Latching valves are designed for intermittent duty only. Wattage rating applies to ms duration required to actuate valve. Once switched no additional power is required to hold the valve in its position. Optional Body Material S= 300 Stainless Steel Examples AM1124 = 2 Way Normally losed valve with 0.025" orifice, 110 psig max pressure rating, and 24 VD coil rated at 0.65 watts. AM32115A = 2 Way Normally Open valve with 0.048" orifice, 100 psig max pressure rating, and 115 VA coil with rectifier. AM4306LK = 3 Way Latching valve with 0.090" and 0.078" orifices, 30 psig max pressure rating, 6 VD coil and suitable for oxygen service. 62

17 Dimensions 2 and 3-way Standard Solenoid: Inches [mm] Dimensions 2 and 3-way Latching Solenoid: Inches [mm] [5.3] Latching Wiring Diagram Latch ircuit Orange = 24 VD + Yellow = 12 VD Blue = 6 VD ommon Ground ( Black ) ( Brown ) UN-Latch ircuit [5.3] - + 2/2 AM 63

18 2/2 202 Posiflow Micro Proportional Valves M5 Threaded Ports or Pad Mount Versions Brass body The 202 Posiflow valves are 2 Way, normally closed, micro solenoid valves designed to proportionally control the flow of air or other gases by varying the electrical input to the coil. They are available as stand alone valves with M5 thread ports or pad mount versions for manifold mounting. Ideal to precisely control flow rates in medical equipment and analytical instrumentation. ompact construction saves valuable space in OEM equipment. Low power consumption of 3 Watts. Low hysteresis, excellent repeatability, and high sensitivity for precise flow control. onstruction Body ore Tube ore and Plugnut Springs Seat Disc and Seals Electrical Standard Voltage Electrical oil Input Power onsumption Opening urrent 12 VD 24 VD Recommended PWM Frequency Valve Valve Parts in ontact with Fluids Brass Brass Stainless Steel Stainless Steel Brass FKM 12, 24 VD 0 24 VD 3 Watts Max. 175 ma Max. 125 ma 1000 Hz Hysteresis <5% Repeatability <3% Sensitivity <2% oil Insulation lass F Ambient Temperature 32 F to 140 F (0 to 60 ) Electrical onnection Spade, (DIN 46244, ISO 4400) DIN onnectors Protection Rating (See Electrical onnectors page 75) Size 9.4 mm, Form IP65 with DIN Plug onnector Fluid Temperature 32 F to 212 F (0 to 100 )to 194 F Vacuum Rating 29 Hg ) 64

19 Specificatons Ports Orifice Size (ins.) v Flow Factor Minimum Maximum atalog Number onstr. Ref. Power (Watts) Weight (oz.) M5 Threaded Ports M SE202A105V M SE202A106V M SE202A107V M SE202A108V Pad Mount onstruction SS202A101V SS202A102V SS202A103V SS202A104V Dimensions: inches [mm] onstr. Ref [5].35 [9].59 [15] 1.01 [25.7] 2.68 [67.95].58 [14.7] 2.05 [52.1] Differential Pressure (psi).60 [15.2].59 [15].40 [10.1].79 [20] 2.02 [51.3] 2.53 [64.3] onstr. Ref [4.7].90 [22.8] 1.01 [25.7].58 [14.7] 2.05 [52.1].32 [8.2].60 [15.2].38 [9.7].59 [15].12 [3].27 [6.8] 1.89 [48] 2.40 [61] 2/

20 2/ Posiflow Proportional Solenoid Valves Brass or Stainless Steel Bodies 1/8" to 1/2" NPT The 8202/8203 is a 2 Way proportional valve available in a Normally losed construction only. They are available as 24 VD operated only with brass or stainless steel bodies. Flow rates are adjustable between 0% and 100% of rating. There are many optional features available including an ASO electronic control unit and electrical connections. Dedicated constructions of the 8202/8203 are suitable for the following applications. General Service (air, inert gas, water, light oil) onstruction Electrical Valve Parts in ontact with Fluids Body Brass 303 Stainless Steel Seals and Disc/Diaphragm FKM or NBR ore Tube Standard voltage: 24 VD oil: Molded lass F (standard) oil resistance: 25 Ohm at 68 F (20 ) Operating current: ma Electrical coil input: 0-24 VD Recommended PWM frequency: 300 Hz Air/Gas; 200 Hz Water/Light Oil Hysteresis: <5% ➀ (<7.5% for 8203 Valves) Repeatability: <3% (<1% for 1/8 NPT Valves)➀ Sensitivity: <2% (<1% for 1/8 NPT Valves)➀ ➀ Percentage of max. value with 24 VD, PWM, 300 Hz voltage supply at constant differential pressure. Nominal Ambient Temperature Ranges: 14 F to 104 F (-10 to 40 ) for 22.6 watt solenoid. 32 F to 104 F (0 to 40 ) for 8.6 watt solenoid. 305 Stainless Steel ore and Plugnut 430F Stainless Steel Springs Rider Rings 302 Stainless Steel PTFE Breaker Piece Brass 303 Stainless Steel % ^ ) N

21 Specifications Operating Pressure Differential (psi) Agency Agency Maximum Approx. Pipe Size (ins.) Orifice Size (ins.) v Flow Min. Air- Inert Gas Liquid Max. Fluid Temp. F Brass onst. Ref. UL FM Stainless Steel onst. Ref. UL FM Wattage Shipping Weight (lbs.) /8 3/ S8202A201V 1 - S8202A205V /8 1/ S8202A202V 1 - S8202A206V /8 3/ S8202A203V 1 - S8202A207V /8 1/ S8202A204V 1 - S8202A208V /4 3/ G001V G011V /4 3/ G051V G061V /4 3/ G002V G012V /4 3/ G052V G062V /4 1/ G003V G013V /4 1/ G053V G063V /4 5/ G004V G014V /4 5/ G054V G064V /4 7/ G006V G016V /4 7/ G056V G066V /4 9/ G007V G017V /4 9/ G057V G067V /8 1/ G023V G033V /8 1/ G073V G083V /8 5/ G024V G034V /8 5/ G074V G084V /8 7/ G026V G036V /8 7/ G076V G086V /8 9/ G027V G037V /8 9/ G077V G087V /8 1/ G /2 1/ G = General Purpose Valve; = Safety Shutoff Valve (omponent Solenoid only with prefix S, SD, or SV) = omponent Solenoid Varies with duty cycle; 22.6 watt is 500 ma with ambient temp. 104 F; 8.6 watt is 6.8 cold/ ma with ambient temp. 69 F Suitable for low vacuum. 2/2 SERIES

22 2/2 SERIES apabilities hart NEMA Type 3-9 High Temp. Solenoid Options Base atalog Number Resilient Materials Other Standard Rebuild Kit Wiring Box Screw Terminal Multipin DIN Spade Open Frame with Leads Brass Stainless Steel NBR FKM EPDM Neoprene Oxygen Service PTFE Urethane Vacuum S8202A201V S8202A205V - E J N S8202A202V S8202A206V - E J N S8202A203V S8202A207V - E J N S8202A204V S8202A208V - E J N EF HB JKP - SD OFSP G001V 8202G011V - E J N EF HB JKP - SD OFSP G051V 8202G061V - E J N EF HB JKP - SD OFSP G002V 8202G012V - E J N EF HB JKP - SD OFSP G052V 8202G062V - E J N EF HB JKP - SD OFSP G003V 8202G013V - E J N EF HB JKP - SD OFSP G053V 8202G063V - E J N EF HB JKP - SD OFSP G004V 8202G014V - E J N EF HB JKP - SD OFSP G054V 8202G064V - E J N EF HB JKP - SD OFSP G006V 8202G016V - E J N EF HB JKP - SD OFSP G056V 8202G066V - E J N EF HB JKP - SD OFSP G007V 8202G017V - E J N EF HB JKP - SD OFSP G057V 8202G067V - E J N EF HB JKP - SD OFSP G023V 8202G033V - E J N EF HB JKP - SD OFSP G073V 8202G083V - E J N EF HB JKP - SD OFSP G024V 8202G034V - E J N EF HB JKP - SD OFSP G074V 8202G084V - E J N EF HB JKP - SD OFSP G026V 8202G036V - E J N EF HB JKP - SD OFSP G076V 8202G086V - E J N EF HB JKP - SD OFSP G027V 8202G037V - E J N EF HB JKP - SD OFSP G077V 8202G087V - E J N EF HB JKP - SD OFSP G001 - V E J N EF HB JKP - SD OFSP G002 - V E J N = Standard Electronic ontrol Unit (sold separately) omponent Material Housing Assembly PA + FV over PA + FV Screw Zinc plated steel Gasket NBR onnector Specification ISO 4400 Protection IP 65 Attribute Supply Voltage Power onsumption Max. Full-Load urrent Input ontrol Signal Switch-Off urrent Ramp Time Adjustable PWM Frequency Adjustable Off-set Adjustable Full-load ontrol 24VD +/- 10% (10% max. ripple) 0.8 Watts 1100 ma (pre-set to 500 ma) 0-10 VD, 0-20 ma, or 4-20 ma <2% of max. Input ontrol Signal On (adjustable sec.) or Off Hz 15-50% of PWM voltage % of PWM voltage Dimensions: inches 2.75 [69.9] 1.88 [47.8] 1.19 [30.2] Manual Operator Mounting Bracket Pipe Size Part Number 1/8" 8908A001 1/4" to 1/2" 8908A003 Brass A 1.63 [41.4] 1.19 [30.2] Brass D Stainless Steel A Stainless Steel D 2.0 [50.8] 1.22 [31.0].16 [4.1] 68

23 Dimensions: Inches [mm] [58.9] 1.1 [27.9].67 [17.0] [25.4].59 [15.0] [21.8] [41.1] [50.8] [19.1] 2 [85.3] [15.0] [85.3].59 [15.0] [60.2] onstr. Ref [9] onstr. Ref. 3 [60.2] [17.3] [21.8] [20.6].87 [22.1] onstr. Ref [51.8] [78.0] 2.36 [60.0] [49.5] [49.5] [31.8] [46.7] [67.8] [69.9] [82.0] [44.7] [88.1] [39.6] [47.8] [19.1] [85.3] [85.3] onstr. Ref. 2 [60.2] [60.2] onstr. Ref. 4 [20.6] onstr. Ref. 6 [49.5] [49.5] [30.2] [29.2] [69.9] [46.7] [80.3] [52.1] [85.3] [60.2] [49.5] [37.1] [80.0] [94.0] [44.7] [67.8] [82.6] 2/2 SERIES