Bussmann series IEC cylindrical fuses

Transcription

1 IE and ritish Standard fuses 5 ontents ussmann series IE cylindrical fuses Section page escription Fuses S Type P and fuses (N, S and PON) HR Form II lass fuses (GL) 3 HRI industrial ceramic body fuses HRI- (IF) 4 HRI- (IF06) HRI-J fast-acting (J) HRI-Misc. Type K (IH, IK and IL) HR Form II current-limiting fuses (H07, K07, L4, M4, L09, M09, P09, P, R) 5 6 S88 Part fuses SS, NS, ES ST, NIT, O, O, OS, EO, EO 7 S88 EF, FF, FG, GF, GG, GH IN Type iazed (6, 7, 33, 5) IN Type N Neozed (NZ0, NZ0) 8 9 NH HR fuses (NHG) 0- JKS-700 fast-acting, current limiting UL Recognized and S omponent cceptance 700 Vac fuses up to 60 amps NH fuse blocks and accessories (S, T) Fuses continued IE 6069 industrial fuses with and without indicator/striker omplete portfolio of 8- mm diameter lass am and lass gg cylindrical fuses for industrial applications lass gg ferrule (0G, 4G, G) 3 lass am ferrule (0M, 4M, M) 4 HR fuse holders Master SFEloc 5 Red Spot USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries 5- IE and ritish Standard fuses,,,,,, E, EFS

2 5 IE and ritish Standard fuses N, S and PON S Type P and fuses S time-delay Type and P fuses. imensions in (mm) 50 Vac (N and PON) 600 Vac (S) Up to 60 mps F IR 0 k minimum 70 to 600 E S ertified to. No. 59., E Features Economical fuse in a variety of ratings for applications not requiring time-delay Typical applications Lighting, heating and other circuits not subject to temporary surges and where available short-circuit current are relatively low atalog no.* atalog symbol vailable amp ratings Time-elay S Type "" fuses N** S 50 Vac 600 Vac One-time S Type "P" fuses 0,, 5, 0, 5, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 5, 50, 75, 00, 5, 50, 300, 350, 400, 450, 500, 600 0,, 5, 0, 5, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 5, 50,75, 00, 5, 50, 300, 350, 400, 450, 500, 600 PON 50 Vac 5, 0, 5, 30, 35, 40, 45, 50, 60 * To order, specify catalog symbol and amp rating, e.g., N30, S0 or PON40. ** elow 0 amps, use FRN-R. elow 0 amps, use FRS-R. mps E F N/PON 50 Vac Up to 30.0 (5) 0.6 (4) (76) 0.8 () (49).0 (5) 0. (3) 0.8 (9) (85).4 (35) 4. (05) 0. (5). (9) (9).9 (48) 4.6 (8) 0.3 (6).6 (4) (64).3 (57) 5. (3) 0.3 (6) (5) S 600 Vac Up to (7) 0.8 () (40). (7) (00).0 (5) 0. (3) 0.8 (9) (45).4 (35) 6. (6) 0. (5). (9) (95).9 (48) 7. (8) 0.3 (6).6 (4) (340).3 (57) 8. (08) 0.3 (6) (5) Recommended fuse blocks atalog no.* Fuse amps Up to 30 HM5030-(poles) HM60030-(poles) HM5060-(poles) HM60060-(poles) HM500-(poles) HM6000-(poles) 0-00 HM500-(poles) HM6000-(poles) HM5400-(poles) HM60400-(poles) HM5600-(poles) HM60600-(poles) * To order, specify, or 3 poles, e.g., HM5030-_. See data sheets 089 (30-60 ) and 39 ( ) for available terminals. ata sheet no USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

3 IE and ritish Standard fuses 5 GL HR Form II lass fuses urrent-limiting HRII- fuses designed to withstand inrush currents on typical motor start-ups while offering high current limitation in the short-circuit region. See drawings for dimensions. 600 Vac 50 Vdc (-30 ) mps -600 IR 00 k 40 k S ertified,. No. 06, lass 4,File 53787, E atalog no. (amps) GL- GL-5 GL- GL-5 GL- GL-30 GL-90 GL-50 GL-3 GL-35 GL-00 GL-300 GL-4 GL-40 GL-0 GL-350 GL-6 GL-45 GL-5 GL-400 GL-0 GL-50 GL-50 GL-450 GL-5 GL-60 GL-75 GL-500 GL-0 GL-70 GL-00 GL-600 Features imensions in (mm) GL (5.56) GL (50.8). (7.04) 3.3 (84.4) 0. (5.56).0 (50.8). (7.04) 3.5 (88.9) (8.7) GL (5.56) 0. (5.56).39 (60.7) 3.64 (9.47) 4.3 (09.54) (8.7) GL (9.53) 3.00 (76.) 4.30 (09.) 5.3 (34.87) 0.34 (8.73) (8.7) 0.8 (0.64) 0.50 (.7) 0.8 (0.64) 0.75 (9.05) (8.7).34 (34.04) 0.06 (.59) 0.94 (3.8) 0.75 (9.05) 0.06 (.59).06 (6.9) 0.09 (.9).375 (34.93).50 (38.).0 (5.4) 0.5 (3.8) 0.9 (4.76) IE and ritish Standard fuses lose sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications GL (76.) 5.5 (33.35) 8.9 (07.96).0 (5.4).38 (60.33) For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads vailable Red Spot fuse holders 0.4 (0.3).0 (5.4) Fuse amps Up to 3 atalog symbol* RS3_ RS63_ RS00_ 0-00 RS00_ GL (5.4) 3.0 (76.) 5.5 (33.35) 8.9 (07.96) 0.60 (5.4) (9.53) 3.00 (76.) RS400_ * See Red Spot data sheet no for terminal options. USSMNN SERIES FULL LINE TLOG 007 JUNE 07 ata sheet no. 45 Eaton.com/bussmannseries 5-3

4 5 IE and ritish Standard fuses IF HRI- industrial ceramic body fuses The HRI- bolt-on, ceramic body fuse provides both overload and short-circuit protection to HRI requirements. Offset blades for bolt-on mounting IF fuse fits the ussmann series Red Spot fuse holder (data sheet 0083) and Master fuse holder (data sheet number 43). 600 Vac 50 Vdc mps -30 IR 00 k RMS Sym. S., No. 06-M9, E atalog no. mps atalog no. mps IF 5IF 5 3IF 3 0IF 0 6IF 6 5IF 5 0IF 0 30IF 30 Features lose sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders mps escription atalog no.* Up to 0 Red Spot RS0_(terminal option) Up to 30 Master M0F IF06 HRI- industrial ceramic body fuses miniature offset clip-in blade, ceramic body industrial fuse that provides both short-circuit and overload protection and the IF06 fits the 30 SFEloc fuse holder (data sheet number 433). 600 Vac 50 Vdc mps -30 IR 00 k RMS Sym. S. No. 06-M9 (3-30 only), E atalog no. mps atalog no. mps IF06 5IF06 5 3IF06 3 0IF06 0 6IF06 6 5IF06 5 0IF IF06 30 Features lose sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders mps escription atalog no.* Up to 30 SFEloc 30(terminal option) * See data sheet no. 433 for SFEloc details. imensions in (mm) * See data sheet no (Red Spot) and 43 (Master) for details. imensions in (mm).38 (60).44 (36).5 (55).44 (36) 0.54 (4) 0.5 (3) 0.54 (4) 0.9 (5) 0.44 () 0.4 (4) 0.03 (4).75 (45) 0.03 () ata sheet no. 47 ata sheet no USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

5 IE and ritish Standard fuses 5 J HRI-J fast-acting fuses IH, IK and IL HRI Misc. Type K fuses HRI-J bolt-on, ceramic body fast-acting fuses are industrial duty fuses with the excellent current-limiting characteristics of fast-acting HRI-J fuses to limit damage to equipment and installations from the thermal and magnetic energy associated with a large short-circuit current. Overload characteristics limit cable damage due to low overload currents. 600 Vac (or less) 50 Vdc mps -600 IR 00 k S. No. 06-M9; designed to S88:, IE atalog no. (amps)j J 35J 00J 300J 3J 40J 0J 350J 6J 45J 5J 400J 0J 50J 50J 450J 5J 60J 75J 500J 0J 70J 00J 600J 5J J 5J 30J 90J 50J imensions in (mm) E J K F H Misc. Type K HRI bolt-on, ceramic body fuses provide both overload and short-circuit protection, featuring offset blades for bolt down mounting. 600 V mps -00 IR 00 k@600 V S. No. 06-M9, E atalog no. (amp)ih, IK, IL IH07 5IH07 35IK07 IL4 3IH07 0IH07 40IK07 90IL4 6IH07 5IH07 50IK07 00IL4 0IH07 30IH07 60IK07 imensions in (mm) The IL4 has a rejection hole, not a slot as shown above. mps E F G H J K L Up to K.5 (57).8 (58).75 (70) 0.94 (4).06 (7).44 (37) 3.38 (86) 3.56 (9) 4.38 () F L 0.38 (0) 0.5 (3) 0.75 (9) 0.04 () 0.05 () 0.09 (3) H.88 (73).88 (73) 3.69 (94) G G 0. (5) 0. (5) 0.34 (9) J E 0.3 (8) 0.4 () 0.4 () (5).09 (8).5 (39) 0.0 (3) 0.3 (3).38 (60).38 (6).9 (74) IE and ritish Standard fuses Up to 60 mps E F G H J K Up to 30.5 (57) (60) (7) 5.75 (46) 7.3 (8) 8 (03) 0.5 (3) 0.63 (6) 3.63 (9) 4.38 () 5.5 (33) 6 (5) 0.8 ().06 (7).3 (8).63 (4).3 (54).63 (66) 0.75 (9).3 (9).63 (4) (5) 70 to (3) 0.9 (5) 0.5 (6) 0.38 (0) (5).38 (35).88 (48).3 (54) 0.5 (3) 0.69 (8) 0.94 (4) (5) 0.8 (7) 0.8 (7) 0.4 (0) 0.53 (4) 0.38 (0) 0.38 (0) 0.53 (4) 0.69 (8) G.63 (67) 3 (76) 3.38 (86) 3.75 (96) Recommended fuse holders mps Red Spot* Master* Up to 30 RS3_ M30F RS63_ M60F -00 RS00_ * See data sheet no (Red Spot) and 43 (Master) for details. ata sheet no. 49 USSMNN SERIES FULL LINE TLOG 007 JUNE 07 ata sheet no. 430 Eaton.com/bussmannseries 5-5

6 5 IE and ritish Standard fuses HR Form II current-limiting fuses HR Form II bolt-on, ceramic body current-limiting fuses. 600 Vac (or less) 50 Vdc imensions in (mm) G G F H H07 offset blades F E E J J mps -600 IR 00 k RMS Sym. H K07, K07R, L4, M4 offset blades S. No. 06-M9, S88:, IE 6069:, E G H (amps) catalog no. H07 offset blades H07 6H07 5H07 5H07 4H07 0H07 0H07 30H07 K07 offset blades 40K07 60K07 00K07R 50K07 L4 offset blades L4 M4 offset blades K07R 00L4 5M4* 50M4* 00M4* L09 center blades L09* M09 center blades 00L09* 5M09 50M09 00M09 P09 center blades 50P09* 300P09* 350P09* 400P09* P center blades 50P 300P 350P 400P R center blades 450R 500R 600R * Not suitable for installation in Red Spot fuse holders. Typical applications Used to protect motor control circuits, together with contactors and overload protection relays to provide Type coordination per IE Recommended fuse holders: Red Spot up to 400 amps (data sheet no.0083) and Master up to 00 amps (data sheet no. 43). G L09, M09, P09 center blades K F F P, R center blades atalog symbol/ style E F G H J K H K E E S category H07 offset blades HRII- (35) (4) (85) (9) () (73) (6) (8) (4) K07 offset blades HRII- (56) () (87) (3) () (73) (6) (8) () HRII- (56) () (95) (3) () (73) (6) (8) () MIS L4 offset blades HRII- (60) () () (4) (3) (94) (9) () (5) M4 offset blades HRII- (65) (38) () (9) () (94) (9) () MIS L09 center blades HRII- (60) () (7) (4) (3) () (9) () MIS M09 center blades HRII- (65) (38) (36) (9) (3) () (9) (4) P09 center blades HRII- (78) (59) (36) (5) (5) () (9) (3) MIS P center blades HRII- (78) (59) (0) (5) (5) (33) (0) (6) (5) R center blades HRII- (8) (73) (0) (5) (6) (33) (0) (6) (5) ata sheet no USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

7 IE and ritish Standard fuses 5 SS, NS, ES S88 Part fuses The NS and ES are low voltage offset blade, ceramic body fuses complying with general purpose gg characteristics Vac mps -63 0M5 to 63M00 motor starter ratings IR 33 k (SS) k (NS, ES) Meets the requirements of S88 Part and IE 6069-, E atalog no.* atalog symbol mps (class) Max Vac SS, 4, 6, 0, 6, 0, 5, 3 (gg) 40 E NS 0M5, 0M3, 0M36, 3M36, 3M40, 3M50, 3M63 (gm) 45, 4, 6, 0, 6, 0, 5, 3 (gg) 550 ES 40, 50, 63 (gg) 63M, 63M00 (gm) 45, 4, 6, 0, 6, 0, 5, 3 (gg) 550 * To order, specify catalog symbol and amp rating, e.g., SS0. "M" indicates motor starter ratings. Recommended fuse holders Fuse symbol NS ES atalog no. 3NNSF 63ENSF S88 ref. F F ST, NIT, O, O, OS, EO, EO S88 Part fuses The ST to EO type ceramic body, offset bolt-on blade low voltage fuses complying with general purpose gg characteristics Vac mps -00 0M5 to 00M35 motor starter ratings IR 33 k (ST) k (NIT, O, O, EO, EO, OS) Meets the requirements of S88 Part and IE 6069-, E atalog no.* atalog symbol mps (class) Max Vac ST, 4, 6, 0, 6, 0, 5, 3 (gg) 40 NIT, 4, 6, 0, 6, 0, 5, 3 (gg) 0M5, 0M3 (gm) 550 3M40, 3M50, 3M63 (gm) 45 O, 4, 6, 0, 6, 0, 5, 3, (gg) 550 3M40, 3M50, 3M63 (gm) 500 O 40, 50, 63 (gg) 63M, 63M00 (gm) 3, 40, 50, 63,, 00 (gg) 550 EO 00M5, 00M60, 00M00 (gm) 45 EO 5, 60, 00 (gg) 00M35 (gm) OS, 00 (gg) M5, 00M60 (gm) 45 * To order, specify basic catalog symbol and amp rating. E.g., O6. "M" indicates motor starter ratings. S88 ref IE and ritish Standard fuses Typical applications The ST type are used in 40 V street lighting cut-outs NIT to EO types used for industrial and general purpose applications Recommended fuse blocks and holders Fuse catalog symbol NIT O O OS EO lock/holder catalog no.* M3F, RS0_ M3F, RS3_ M63F, RS63_ M00F, RS00_ H-0 * See data sheet no. 43 (M_), 0083 (RS_) and 00 (H-_). ata sheet no. 405 (SS), 400 (NS) and 40 (ES) USSMNN SERIES FULL LINE TLOG 007 JUNE 07 ata sheet no. 43 (ST), 406 (NIT), 409 (O), 4 (O), 407 (OS), 45 (EO) and 47 (EO) Eaton.com/bussmannseries 5-7

8 5 IE and ritish Standard fuses,,,,,, E, EFS S88 fuses eramic body, center blade two-hole bolt-on low voltage fuses that comply with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 50 amps with four hole mount. 45/550 Vac 50 Vdc mps M to 400M500 motor starter ratings IR see catalog numbers table Meets the requirements of S88 Parts and and IE 6069-, E atalog no.* IR ( k) Max volts atalog symbol mps (class) S88 ref., 4, 6, 0, 6, 0 (gg) , 3 (gg) 500, 4, 6, 0, 6, 0 (gg) , 3 (gg) , 50, 63 (gg) 63M, 63M00 (gm) , 50, 63 (gg) E EFS, 00 (gg) 00M5, 00M60, 00M00 (gm) 5, 60, 00 (gg) 00M50, 00M35 (gm) 50, 35, 355, 400 (gg) M400 (gm) M500 (gm) 550 5, 60, 00, 50, 35 (gg) 45 * To order, specify catalog symbol and amp rating. E.g., 40. "M" indicates motor starter ratings. EF, FF, FG, GF, GG, GH S88 fuses eramic body, center blade four-hole bolt-on low voltage fuses complying with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 50 amps with four hole mount. (see catalog numbers table) 45/690 Vac 50/400 Vdc mps IR see catalog numbers table Meets the requirements of S88 Parts and and IE 6069-, E atalog no.* IR ( k) Max volts atalog symbol mps (class) EF 355, 400 (gg) M500 (gm) 550 S88 ref. FF 450, 500, 560, 630 (gg) FG 450, 500, 560, 630 (gg) GF 70, 0 (gg) GG 70, 0 (gg) , 50 (gg) GH 70, 0, 000, * To order, specify catalog symbol and amp rating, e.g., FG450. "M" indicates motor starter ratings. Recommended fuse blocks Fuse catalog symbol Modular block catalog no.* H-0 H- H-0 H- H- H- E H-3 * See data sheet no. 00 (H-0_) and 0 (H-_) for details. ata sheets no. 40 (), 4 (), 43 (), 44 (), 46 (), 48 (), 49 (E) and 4 (EFS) ata sheet no. 40 (EF), 40 (FF), 4 (FG), 403 (GF), 404 (GG) and 408 (GH) 5-8 USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

9 IE and ritish Standard fuses 5 6, 7, 33, 5 IN Type iazed fuses IN style Type ceramic body low voltage fuses. 500 Vac mps -00 IR 50 k IE 6069 and IN 4955, E NZ0, NZ0 IN Type N Neozed fuses IN style Type N ceramic body low voltage. 400 Vac mps -63 IR 50 k IE 6069 and IN 4955, E atalog no. mps "" dimension olor code Fig. 6 6 Pink rown Green Red Grey 06 0 lue Yellow 7 6 Pink rown Green Red Grey 07 0 lue Yellow lack White opper 5 5 Silver Red dditional 500 V quick acting fuses in body sizes 6, 7, 33 and 5 rated -00. Reference number suffixed "Q." E.g., 07Q. Gauge rings and keys can also be supplied. 3 4 atalog no. mps "" dimension olor code NZ0 Pink 4NZ0 4 rown 6NZ0 6 Green 0NZ0 0 Red 6NZ0 6 Grey 0NZ0 0 5 lue 5NZ0 5 5 Yellow 35NZ lack 50NZ White 63NZ opper imensions mm 36 IE and ritish Standard fuses imensions mm Fig. Fig. Fig. 3 Fig. 4 ata sheet no. 44 ata sheet no. 44 USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries 5-9

10 5 IE and ritish Standard fuses NHG NH HR fuses NHG NH HR fuses IN 000 to 4 lass: gg/gl IN square bodied, dual indication industrial fuses with voltage conducting metal gripping lugs. They are made of a steatite insulator, corrosion-proof (aluminum) metal parts with full-contact and silver-plated copper blades. ll NHG fuses feature a selectivity ratio: :.6 up to 500 Vac. 500 Vac 690 Vac mps -50 IR 0 k Frequency 45-6 Hz operating IE 6069, VE 0636, IN 4360 E (500 Vac only) imensions mm Fuse size a a a 3 a 4 b c c e e e 3 e 4 f Recommended fuse blocks lock catalog no. a 4 a 3 a a Fuse size S S- *, S- 0,, 03, 3 ata sheet no. 064 (500 V), 7009 (690 V) d b f c c e 3 e e 4 min. e 500 Vac gg/gl dual indicator voltage conducting metal gripping lugs mps atalog no. 000 size NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG000 NHG NHG size 50 50NHG NHG00 NHG NHG00 5 5NHG NHG00 0 size 6 6NHG0 0 0NHG0 6 6NHG0 0 0NHG0 5 5NHG0 3 3NHG NHG NHG NHG NHG0 NHG NHG0 5 5NHG NHG0 0 size 6 6NHG0 0 0NHG0 6 6NHG0 0 0NHG0 5 5NHG0 3 3NHG NHG NHG NHG NHG0 NHG NHG0 5 5NHG NHG0 mps atalog no. size 50 50NHG 63 63NHG NHG 00 00NHG 5 5NHG 60 60NHG 00 00NHG 4 4NHG 50 50NHG 35 35NHG NHG 0 size 35 35NHG NHG NHG NHG0 NHG NHG0 5 5NHG NHG NHG0 4 4NHG NHG0 size 50 50NHG NHG 35 35NHG NHG NHG 45 45NHG NHG NHG 03 size 50 50NHG NHG NHG NHG03 3 size 35 35NHG NHG NHG NHG NHG NHG NHG3 0 0NHG3 4 size* NHG4G NHG4G 0 0NHG4G NHG4G 50 50NHG4G * Size 4 is a a single indicator fuse with slotted end blades. 5-0 USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

11 IE and ritish Standard fuses 5 NHG NH HR fuses JKS-700 fast-acting fuses 690 Vac gg/gl dual indicator voltage conducting metal gripping lugs mps 000 size atalog no. NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG size 50 50NHG NHG NHG NHG NHG * 60NHG size 50 50NHG NHG-690 NHG NHG NHG NHG NHG NHG NHG-690 mps size atalog no NHG NHG NHG NHG size 50 50NHG NHG NHG NHG NHG NHG size** NHG NHG4-690 * 60 amps rated at 660 Vac. ** Size 4 is a single indicator fuse with slotted end blades. The JKS-700 is a fast-acting, current-limiting fuse that is UL Recognized and has S omponent cceptance for applications up to 700 Vac. The JKS-700 is available in ratings up to 60 amps with the same dimensions as a standard lass J fuses; but its voltage rating places it outside the standard lass J fuse class. ussmann recommends the JM7000 modular fuse block and the JM7000-MW power distribution fuse block for the 30 amp case size JKS-700 fuses. See page 8-8 for details. 700 Vac (or less) mps 5-60 IR Minimum 6I n 00 k RMS Sym. Operating class ar UL Recognized, 48-3 Semiconductor Fuses, File E564 S omponent cceptance,. No 48.3 Semiconductor Fuses, lass 4-30 Features urrent limitation for non-inductive circuits provides currentlimiting response to maximum ground fault and short-circuit conditions 00 k interrupting rating provides protection at all circuit locations Economical circuit protection for high-fault current circuits Typical applications Power panelboards up to 700 Vac IE and ritish Standard fuses Machinery disconnects up to 700 Vac atalog no. (amps) JKS JKS JKS JKS ata sheet no. 064 (500 V), 7009 (690 V) USSMNN SERIES FULL LINE TLOG 007 JUNE 07 ata sheet no. 06 Eaton.com/bussmannseries 5-

12 5 IE and ritish Standard fuses S_ and T_ NH fuse blocks Shroud kits NH fuse bases feature thermoplastic bodies, and IN-Rail and screw mounting (size 4 is screw fix). They are available with a range of protection accessories for live parts for IP0 protection. up to 690 Vac mps up to 50 NH fuse sizes 000 to 4 IE 6069, IN 4360 Typical applications Protection of industrial circuits and electrical apparatus atalog no. Fuse size Poles mps atalog no. IN-Rail or screw mount 00 3 S T00- S T- S T- S T3- Screw mount only arton qty S4-S 3 4 Neutrals NH size mps atalog no. arton qty. 50 SL SL SL-3 3 Fuse extraction handle Size atalog no. arton qty FEH ccepts fuse sizes 000 and 00 0 and 0 and 03 and 3 atalog no. Fits fuse block T00-IP0 T00- T-IP0 T- T-IP0 T- T3-IP0 T3- S-SK S and S S3-SK S3 Terminal covers and separators (from shroud kits) Terminal covers () Separator (3) NH size mps at. no. arton qty. at. no. arton qty. 00* 60 S00* 6 00* 0 60 S S S S3 6 3 * For single pole only Phase barrier kits* atalog no. Fits fuse block S-P S and S S3-P S3 * Kits include phase barriers and ganging links. ata sheet USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

13 IE and ritish Standard fuses 5 lass gg IE 6069 industrial ferrule fuses 0 to mm diameter IE lass gg fuses with optional indicators (0x38mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, lass gg, 500 and 400 Vac, 0.5 to 3 atalog no. Standard W/ indicator Vac mps IR (k) Holder/block 0G G 0G 0G4 4 0G6 6 0G G0 0 0G HM IN-Rail*, 0 0G6 6 MM block 0G0 0 0G5 5 0G G G G40I G50I * Not recommended for use with indicator version..x58mm, lass gg, 400, 500 and 690 Vac, to 5 atalog no. Standard W/ striker Vac mps IR (k) Holder/block G G4 G4S 4 G6 G6S 6 G8 G8S 8 G0 G0S 0 G GS G6 G6S G0 G0S 0 G5 G5S 5 G3 G3S 3 G40 G40S 40 G50 G50S 50 G63 G63S 63 G GS 500 G00 G00S 00 G5 G5S Ø H IN-Rail*, JM7000 block 0 * Use striker version to actuate optional, external microswitch. imensions mm atalog symbol Ø ØE Indicator/striker 0G G G Ø E IE and ritish Standard fuses 4x5mm, lass gg, 400, 500 and 690 Vac, to 50 atalog no. Standard W/ striker Vac mps IR ( k) Holder 4G 690 4G 4GS G G4S G G6S G G8S G G0S G 690 4GS H4 IN-Rail** 4G G6S G G0S G G5S 4G3 4G3S G40 4G40S G50 4G50S ** Not recommended for use with indicator version, use striker version to actuate optional, external microswitch USSMNN SERIES FULL LINE TLOG 007 JUNE 07 ata sheet no. 705 Eaton.com/bussmannseries 5-3

14 5 IE and ritish Standard fuses lass am IE 6069 industrial ferrule fuses 0 to mm diameter IE lass am fuses with optional indicators (x58mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, lass am, 500 and 400 Vac, 0.5 to 5 atalog no. Standard Vac mps IR (k) Holder/block 0M M 0M 0M4 4 0M HM in-rail, 0M8 8 MM block 0M0 0 0M 0M6 6 0M M5 5 4x5mm, lass am, 400, 500 and 690 Vac, 0.5 to 50 atalog no. Standard W/ striker Vac mps IR (k) Holder 4M M M 4M 4MS M M4S M M6S M M8S M M0S H4 IN-Rail** 4M 690 4MS M M6S M M0S M M5S 4M3 4M3S M40 4M40S M50 4M50S ** Use striker version to actuate optional, external microswitch. x58mm, lass am, 400, 500 and 690 Vac, to 5 atalog no. W/ Standard indicator W/ striker Vac mps IR (k) Holder/block M M4 4 M6 6 M8 8 M0 0 M MS M6 M6S M0 M0S 0 H IN-Rail*, M5 M5S 5 JM7000 block M3 M3S 3 M40 M40S 40 M50 M50S 50 M63 M63S 63 M MS 500 M00 M00S 00 0 M5 M5I M5S * Not recommended for use with indicator version, use striker version to actuate optional, external microswitch. imensions mm Ø atalog symbol Ø ØE Indicator/striker 0M M M Ø E ata sheet no USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries

15 IE and ritish Standard fuses 5 HR fuse holders Master The ussmann series Master HR fuse holder features a unique cam-action for easy fuse removal while allowing significantly improved contact pressure between fuse carrier and base contact that enhances electrical performance. range of lockable safety carriers for the fuse holder (catalog reference LS), are available. 690 V mps up to 00 S. No. 39; IE 69 and S88, E SFEloc The ussmann series SFEloc HR fuse holders (for use with HRI- fuses) provides a positive, stress-free fuse fitting and locks it in position to ensure safe insertion and withdrawal from the base. ase contacts are fully shrouded to help protect against electric shock. Shrouds utilize simple slide/snap action allowing access to the contact terminal screws. It can be mounted on a 35mm IN-Rail or panel-mounted with a single screw. 600 V mps atalog no. mps etails for Fuses accepted M0F 30 HRI- applications _IF M30F 30 _H07 M60F 60 _K07 HRII applications M00F 00 _K07R ccessories atalog no. mps escription Master accepted 0S 30 M0F 3S 30 ack stud M30F 60/00S 60/00 M60/00F GLP ll Ganging link kit 3-Pole 0LS 30 M0F 3LS 30 Security carrier with clip M30F 63/00LS 60/00 M60/00F esigned to accommodate the compact range of offset blade fuse to S. No. 06, HRI-, E atalog no.* mps onnection Fuses accepted 30F 30S 30FS 60F 60S 60FS * For use with HRI- fuses. Front ack Front-back Front ack Front-back ussmann series Red Spot fuse holders _IF06 EK-(amp) IE and ritish Standard fuses These versatile S ertified and IP0 finger-safe fuse holders for S88 HR industrial fuses are available in ratings from 0 to 400 amps. Padlock inserts, warning carriers and fuse adapter accessories enhance safety and application flexibility. See data sheet no for details. USSMNN SERIES FULL LINE TLOG 007 JUNE 07 Eaton.com/bussmannseries 5-5

16 USSMNN SERIES Enhanced safety. Improved system reliability. Simplified inventory. It s easier than ever to improve your circuit protection while efficiently reducing your fuse inventory. Leveraging ussmann series ultimate protection fuses, our Low-Peak Upgrade program couples the industry s most advanced circuit protection with our extensive knowledge to deliver enganced safety, improved system reliability and simplified inventory. In just three simple steps, you ll save time and increase productivity. ll by using ussmann series Low-Peak fuses. Three steps to ultimate protection: udit nalyze 3 Implement Visit Eaton.com/bussmannseries to learn more. Follow us on social media to get the latest product and support information.