Products for enhancing electrical safety and reliability

Transcription

1 Circuit protection solutions BUSSMANN Products for enhancing electrical safety and reliability SERIES

2 Advantages of Bussmann series fused circuit protection Bussmann series fuses are worry-free: High interrupting ratings of up to 300,000 amps help ensure your entire system design isn't compromised due to changing available short-circuit currents over the life of the system. Reduced high incident energy since the fuse is selected based on load, not the amount of available short-circuit current. The current-limiting nature of the fuse helps reduce the stress on the power distribution system and to increase assembly short-circuit current ratings (s). The breadth of finger-safe solutions, open fuse indication, current limitation and arc flash reduction helps keep workers safe. Reduce your time to engineer a system as selective coordination is a mere ratio of fuse amp ratings regardless of the available short-circuit current. Complete offering for complete protection: The breadth of Bussmann series fuses ensures proper protection precisely matched for your unique circuit and equipment protection requirements so you don t have to pay for more than your system requires. Internal parts of fuses do not require maintenance offering years of service protecting you as your system changes. A periodic check of fuse mountings for loose connections is recommended to eliminate potential excessive heat. Broad portfolio Our comprehensive portfolio of overcurrent and overvoltage products and accessories protect buildings and equipment. Our products meet virtually any low voltage, medium voltage, photovoltaic and high speed fuse requirement to cover a broad range of circuit protection needs. To round out our portfolio, we offer innovative fuse blocks and holders, electrical gear and other products necessary for the safe and reliable application of electricity. Innovative solutions Our experts continually introduce innovative solutions so your application can operate more safely and efficiently. Our solutions help reduce arc flash hazards, provide superior electrical system and equipment protection, save panel space and provide quicker installation to assist in increased safety, all while reducing maintenance time and inventory. Local resources and technical expertise Our application engineering team is your resource for help in the proper selection and application of overcurrent and overvoltage circuit protection devices: Specification review in conjunction with overcurrent protective devices,, selective coordination or available fault current Training for distributors, OEMs and consultants including local lunch-and-learn sessions Custom engineered products Product and technical materials Quote for an on-site 4- or 8-hour electrical safety awareness program Technical tools, like the Bussmann series FC2 Available Fault Current Calculator and FuseFinder Low-Peak Upgrade fuse inventory consolidation programs

3 BUSSMANN SERIES QuikShip Our commitment to customer service includes our distribution center in St. Louis, Missouri, that s strategically located at a major transportation hub, and is fully stocked with popular products that can ship within 24 hours with our QuikShip Everyday Service. Should your customers have an emergency and need to restore power fast, we offer expedited shipment. This service is available 24/7/365, and customers pay only the standard product price, rush freight charges and modest fee. Place orders through our Customer Satisfaction Team toll free at BUSSMANN ( ) Mon-Fri 7:00 a.m. - 6:00 p.m. Central Time, and after hours, weekends and holidays at For same day shipment emergency service, orders must be placed by 11:00 a.m. Central Time, Mon-Fri. Helpful tools Bussmann series technical references and online tools help customers properly select and apply overcurrent protective devices: OSCAR 2.1 Online compliance software This award-winning tool helps panel builders meet NEC requirements by determining equipment and highlighting the weak links that hold the design back, along with the ability to substitute panel components to achieve the they need. FC 2 Available Fault Current Calculator This award-winning tool determines available fault current and is an invaluable aid in meeting NEC and equipment labeling requirements. Bussmann series selector tools These online tools cover low voltage and medium voltage fuses, connectors and surge protective devices, and help users determine which Bussmann series products are right for their application.

4 Bussmann series UL low voltage, branch circuit fuses Class CC Low-Peak time-delay, current-limiting, rejection-type fuses. Catalog symbol: LP-CC Dimensions: x (10 x 38 mm) 300 Vdc ( A and A; A) 150 Vdc ( A), 32 Vdc A 200 ka RMS Sym. 20 ka DC Class CC also available in fast-acting (KTK-R). Class CF Class G Fast-acting (1 2-6 A), time-delay (7-60 A) size-rejecting fuses help prevent overfusing. Catalog symbol: SC 600 Vac ( A) 480 Vac (25-60 A) 170 Vdc ( A) 300 Vdc (30 and 60 A only) 150 Vdc ( A), 32 Vdc A 100 ka RMS Sym. 10 ka DC Class L CUBEFuse finger-safe UL Class CF fuses, with Class J electrical performance and fuse holder system. Catalog symbol: TCF - time delay, FCF - fast acting, TCFH - holder Poles: 1-pole (gangable) 300 Vdc (or less) A 300 ka RMS Sym ka DC Low-Peak time-delay fuses for large capacity circuits. Catalog symbol: KRP-C 300 Vdc ( A, 3000 A) A (use KRP-CL for A current ratings) 300 ka RMS Sym. 100 ka DC Also available in fast-acting (KTU).

5 Class J Low-Peak current limiting dual-element, time-delay fuse available with optional indication on select ratings. Catalog symbol: LPJ 300 Vdc (or less) 1-600A 300kA RMS Sym. 100 ka DC Also available in fast-acting (JKS). Class RK1 Class RK5 LPN-RK LPS-RK Low-Peak current-limiting, dual-element, timedelay fuses available with optional indication on select ratings. Also available in fast-acting. Catalog symbol: LPN-RK_SP, LPS-RK_SP 250 Vac (or less) 125 Vdc (0-60 A) 250 Vdc ( A) 300 Vdc 1/ A 300 ka RMS Sym. 100 ka DC Also available in fast-acting (KTN-R, KTS-R). FRN-R FRS-R Fusetron dual-element, time-delay fuses available with indication on select ratings. Catalog symbol: FRN-R, FRS-R 250 Vac (or less) 125 Vdc ( A, A) 250 Vdc ( A) 300 Vdc A, Vdc A A 200 ka RMS Sym. 20 ka DC Class T JJN Limitron very fast-acting, current-limiting fuses. Catalog symbol: JJN, JJS 300 Vac (or less) 160 Vdc ( A) 170 Vdc ( A) A 200 ka RMS Sym. 20 ka 160 Vdc 100 ka 170 Vdc JJS A 200 ka RMS Sym.

6 Bussmann series low voltage, supplemental fuses Fast-acting Time-delay FNM: FNQ: FNA: Time-delay supplemental fuses. For superior protection, Eaton recommends upgrading to Bussmann series FNQ-R Class CC fuses. Catalog symbol and ratings: Green (250 Vac maximum voltage) Orange (500 Vac maximum voltage) Pin indicating time-delay supplemental fuses. Catalog symbol and ratings: Green (250 Vac max voltage 1/10 to 6 A) Blue (125 Vac max voltage 6-1/4 to 15 A) Grey (32 Vac max voltage 20 to 30 A) BAF: KTK: KLM: BBS: MIC: Fast-acting, supplemental fuses. For superior protection, Eaton recommends upgrading to Bussmann series Low-Peak Class CC fuses. Catalog symbol and ratings: Green (250 Vac max 1/4 to 30 A) Black (600 Vac maximum voltage) Black (600 Vac/dc maximum voltage) Black (600 Vac max voltage 1/10 to 6 A) Green (250 Vac max voltage 7 to 10 A) Purple (48 Vac max voltage 12 to 30 A) MIC pin indicating, fast-acting fuses. Catalog symbol and ratings: Green (250 Vac max 1 to 15 A) Grey (32 Vac max 20 to 30 A) Bussmann series medium voltage fuses E-Rated R-Rated E-Rated, current-limiting, medium voltage fuses for feeder circuit, switchgear and transformer protection. Catalog symbol: 2CLE, JCX, 5CLE, 5HLE, JCY, 8CLE, 8HLE, 15CLE, 15HLE, 15LHLE, MV kv, 5.5 kv, 8.3 kv and 15.5 kv A 50 ka RMS Sym ka RMS Sym ka RMS Sym. Indoor/enclosure, R-Rated medium voltage, current limiting fuses for motor circuit protection. Catalog symbol: 2CLS, 2ACLS, JCK, 2HCL, 2BCLS, 8CLS,7CLS,8ACLS, 7ACLS, 7BCLS 2.4 kv (nominal) 2.54 kv (max design) A 50 ka Sym. 80 ka Sym. PT Indicating and non-indicating E-Rated, current-limiting fuses for potential, small power and control transformers. / DIN 2.4 kv ( A), 3.6 kv (2-10 A), 5.5 kv ( A), 7.2 ka ( A), 8.3 kv ( A), 12 kv ( A), 15.5 kv ( A), 17.5 kv (2-10 A), 24 kv (2-4 A), 25.5 kv (0.5-1 A), 36 kv (2-4 A), 38 kv (0.5-4 A) DIN dimensioned indicating fuses in compliance with IEC for transformer protection. / 3.6 kv ( A), 7.2 kv ( A), 12 kv ( A), 17.5 kv ( A), 25 kv ( A), 36 kv ( A)

7 Bussmann series high speed fuses Class J High speed, current-limiting UL Class J fuses with lowest I 2 t of any branch circuit fuse to protect power semiconductor devices that utilize diodes, GTOs, SCRs and SSRs. Catalog symbol: DFJ 450 Vdc (or less, A) A 200 ka RMS Sym. 100 ka DC North American Vac/dc rated blade and flush end fuses featuring low energy I 2 t, low watts loss, superior cycling, low arc voltage and excellent DC performance. Catalog symbol: FWA, FWX, FWH, KAC, KBC, FWP, FWJ Vac/dc A 200 ka RMS Sym. Compact high speed fuse amp fuses use up to 48% less enclosure space compared to traditional round body fuses. Catalog symbol: CHSF / 500 Vac/dc A AC Up to 50 ka DC Square body Class ar fuses designed and tested to IEC 60269, Part 4, featuring minimal I 2 t, lower operating temperature and watts loss for high power applications requiring a compact design. Catalog symbol: 170M, 170E, 170F Vac (IEC) 700 Vac (UL) Vdc A ka RMS Sym. Also available in BS-88 and ferrule style.

8 Bussmann series fuse blocks and holders Power distribution fuse blocks Patented Bussmann series Class H(K), J and R power distribution fuse blocks combine two components in one, simplifying panel layout and using up to 65% less panel space. Optional covers enhance electrical safety. Catalog symbol: JM, Class J; HM, Class H(K); RM, Class R 250 V (Class H(K) and R only) 600 V (Class H(K), R and J) Up to 60 A (Class H(K), R and J) 70 to 400 A (Class J only) 200 ka Sym. RMS (Class J and R) 10 ka Sym. RMS (Class H(K) only) Up to 60 A DIN-Rail and panel mount A Class J panel mount only Modular fuse blocks Snap-together Bussmann series Class H(K), J, and R fuse blocks make installation easy and increase flexibility, while reducing inventory. Optional IP20 covers enhance safety. Catalog symbol: HM, JM, RM 250 V (Class R and H(K) only) 600 V (Class J, R and H(K)) Up to 600 A 200 ka (Class J and R) 10 ka (Class H(K) only) Up to 60 A DIN-Rail and panel mount A Class J panel mount only

9 Modular fuse holders Class-CC, Midget, Class gr, ar HSF, and Class gg and am Accommodate fuses from around the world, including North American Class-CC, Class J, Midget, Class gr, ar HSF, and IEC industrial ferrule (Class gg and am) in four physical sizes: 8x32, 10x38, 14x51 and 22x58 mm Catalog symbol: CH / 600 V/30 A (UL) 690 V/32 A (IEC) DIN-Rail mount Class J / 600 Vac/dc (or less), 30 A or 60 A DIN-Rail and panel mount PV10x38 / 1000 Vdc/30 A Up to 33 ka DIN-Rail mount Miscellaneous fuse blocks, holders and clips also available for Class G and T, high speed, medium voltage and supplemental fuses DIN-Rail, panel mount or in-line. Finger-safe, high power distribution blocks Bussmann series IP20 finger-safe design (under specific wiring conditions) offers high short-circuit current ratings and a small footprint to save panel space. Blocks dovetail together to form the number of poles needed. Catalog symbol: PDBFS 600 Vac/dc (UL 1953) 690 Vac/dc (IEC) Up to 760 A DIN-Rail and panel mount Open, high power distribution blocks Popular open-style power distribution blocks with up to 200 ka to help achieve high assembly for code compliance. Catalog symbol: PDB 600 Vac/dc (UL 1953) 175 and 310 A Panel mount Miscellaneous power distribution and terminal blocks available for a variety of applications.

10 Bussmann series disconnect switches and surge Compact Circuit Protectors (CCP) Industry s smallest UL 98 fused disconnect offers superior circuit and finger-safe protection while delivering up to 200 ka in a compact, finger-safe design. Catalog symbol: CCP, CCPLP CCP for 240, 400, 600 Vac CCP for 600 Vac class CC, UL 80 Vdc Class CF 125 Vdc midget and 30 A (UL) CUBEFuse 30, 60 10x38mm IEC 32 A (IEC) and 100 A up to 200 ka 100, 200 ka DIN-Rail mount DIN-Rail mount Low Profile CCP for Class CC, Class G, midget and 10x38 IEC 600 Vac (Class CC up to 30 A, Class G 20 A) 550 Vac (10x38 IEC Class am A) 500 Vac (10x38 IEC Class gg A) 400 Vac (10x38 IEC Class am A, gg 32 A) 240 Vac (13/32 x 1-1/2 Midget UL 30 A) Up to 30 A (UL) Up to 32 A (IEC) 200 ka (Class CC) 120 ka (10x38 IEC Class gg and am) 100 ka (Class G) 10 ka (13/32 x1-1/2 Midget UL) front panel mount Rotary disconnect switches - fused and non-fused Bussmann series UL 98 fused disconnect switches break and make power circuits ON and OFF load, employing double break contacts per pole that help ensure complete isolation of the fuse when the switch is in the "OFF" position. Also available in non-fused versions. Catalog symbol: RDF, RD, ER (enclosed) Up to 1200 A for Class CC, J or L fuses DIN-Rail or panel mount Surge Protective Devices (SPDs) DIN-Rail mounting Type 2 Recognized Surge protection for UL 508A applications with comprehensive UL th Edition Recognized devices in 1-,2-, 3- and 4-pole versions to meet virtually any electrical system need. Catalog symbol: BSPM Up to 600 V (black label) Also available for photovoltaic systems up to 1200 Vdc (yellow label) and low voltage AC/DC power (blue label).

11 Bussmann series electrical gear Quik-Spec Power Module Elevator Disconnects Fusible power switch or panel with shunt trip and fire safety interface to allow for single point tie in with fire alarm system for single and multiple elevator applications. Catalog symbol: PMP, PS 600 Vac Switch PS A Panel PMP A bus A feeder switch Assembly 200 ka RMS Quik-Spec Coordination Panelboard (QSCP) Smallest standard fusible panelboards in the industry featuring Bussmann series finger-safe UL Class CF CUBEFuse with time-delay or UPS/ Critical application fast-acting fuses. 600 Vac 125 Vdc QSCP4 QSCP12 Assembly A mains A branches A mains A branches Available enclosures: NEMA 1, NEMA 3R, and Class I. Div2 (consult factory)

12 Customer satisfaction team: Available to answer questions regarding Bussmann series products and services Monday-Friday, 7:00 a.m. 6:00 p.m. Central time. Toll-free phone: (855-BUSSMANN) Toll-free fax: Emergency and after-hours orders: Next flight out or will call shipment for time-critical needs. Customers pay only standard product price, rush freight charges, and modest emergency service fee. Place these orders through the customer satisfaction team during regular business hours. After hours: Application engineering: Technical assistance is available to all customers. Application support is available Monday- Friday, 7:00 a.m. 5:00 p.m. Central time. Toll-free phone: (855-BUSSMANN) My.Eaton.com: Provides real time product availability, net pricing, order status and shipment tracking. Log onto My.Eaton.com or call: Option #3 for log-in assistance. Online resources: Visit Eaton.com/bussmannseries for the latest in new product introductions and more: Product catalogs and profiles Product data sheets Application and technical references Bussmann toolbox: Visit Toolbox.bussmann.com to access resources like: Arcing current calculator Available Fault Current Calculator (FC 2 ) OSCAR 2.1 compliance software RoHS compliance product search Protection Suite Selective Coordination Designer v1.0 Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Bussmann Division 114 Old State Road Ellisville, MO United States Eaton.com/bussmannseries 2017 Eaton All Rights Reserved Printed in USA Publication No March 2017 Eaton, Bussmann, CUBEFuse, Fusetron, Limitron, Low-Peak and Quik-Spec are valuable trademarks of Eaton in the US and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. IEC is a registered trademark of the International Electrotechnical Commission. UL is a registered trademark of the Underwriters Laboratories, Inc. For Eaton s Bussmann series product information, call or visit: Eaton.com/bussmannseries Follow us on social media to get the latest product and support information.