Bussmann Open and Enclosed Rotary Disconnect Switches. Exceptional Breadth and Availability for Your Application

Transcription

1 Bussmann Open and Enclosed Rotary Disconnect Switches Exceptional Breadth and Availability f Your Application

2 2 Visit us on the web at

3 Table of Contents Compact Circuit Protect (CCP) Disconnect Switches 30A Class CC, Midget & 10x A 60A and 100A Class CF 6-7 UL 98 Fused Disconnect Switches 30 to 800A Introduction & Agency Infmation 8 Product Line Summary 9 30A Compact Class CC & Class J A Class J A Compact Class J A Class J A Class J A & 400A Class J A Class J and 800A Class L UL 98 Non-Fused Disconnect Switches 30 to 1200A Introduction & Agency Infmation 26 Product Line Summary 27 30A, 60A and 100A Compact A, 200A and 400A Standard A, 800A, 1000A and 1200A Standard UL 508 Non-Fused Disconnect Switches 16 to 80A Introduction and Agency Infmation 34 Product Line Summary 35 16A, 25A, 40A, 63A and 80A Standard Enclosed UL 98 & UL 508 Disconnect Switches Introduction & Agency Infmation 39 Fused UL 98 30A to 800A Enclosed Disconnects Non-Fused UL to 1200A Enclosed Disconnects Non-Fused UL to 80A Enclosed Disconnects Part Number Index Bussmann circuit protection solutions comply with maj industrial standards and agency requirements such as: BS, IEC, DIN, UL, NEMA, SAE, CSA, CE, C-UL, etc. and are manufactured at facilities that are ISO 9000 certified. This catalog is intended to present product data and provide technical infmation that will help the end user with design application. Bussmann reserves the right, without notice, to change design construction of any products and to discontinue limit distribution of any products. Bussmann also reserves the right to change update, without notice, any technical infmation contained in this catalog. Once a product has been selected, it should be tested by the user in all possible applications. Further, Bussmann takes no responsibility f errs omissions contained in this catalog, f misapplication of any Bussmann product. Extensive product infmation is available in the Bussmann product data sheets available online at Visit us on the web at 3

4 Compact Circuit Protect (CCP) Disconnect Switch 30A 1-, 2- & 3-Pole, Class CC, UL Midget & 10x38mm IEC UL No. Max Hsepower Rating* Amp Fuse No. of Wire Size/ Wire Part Rating Class Poles Volts SCCR Vac Vac Vac Vac (Tque ) Type Number Agency Infmation 30 CC 1 600Vac 200kA 0.5 CCP-1-30CC UL 98 Listed, culus 22.2, No CC 2 600Vac 200kA 2 Single/Dual CCP-2-30CC UL 98 Listed, culus 22.2, No CC 3 600Vac 200kA AWG CCP-3-30CC UL 98 Listed, culus 22.2, No UL Midget 240Vac 1 10kA Sol/Str UL 508 Listed, culus 22.2, No CCP-1-30M 32* 10x38 IEC 400Vac 120kA 75 C IEC , AC23A 30 UL Midget 240Vac 2 10kA Single Cu UL 508 Listed, culus 22.2, No CCP-2-30M 32* 10x38 IEC 400Vac 120kA 4AWG higher IEC , AC23A 30 UL Midget 240Vac 3 10kA Sol/Str UL 508 Listed, culus 22.2, No CCP-3-30M 32* 10x38 IEC 400Vac 120kA IEC , AC23A 30 CC 1 80Vdc 20kA Spade CCP-1-DCC UL 98 Listed, CSA 22.2, No CC 1 80Vdc 10kA Terminal UL 508 Listed, culus 22.2, No CCP-1-DCM 32* 10x38 IEC IEC , DC23A *32A Class am, 25A Class gg. SCCR May be lower, refer to installed fuse data sheets. Spade terminal with a 4.3mm gap f a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG AWG; 20 Lb-In - 8-4AWG; 35 Lb-In Specifications Agency Infmation CE Compliant RoHS Compliant F Class CC fuse versions - UL 98 Listed, File E302370, Guide WHTY - culus to CSA Standard 22.2 No. 4-04, File , Guide WHTY7 F UL Midget and 10X38 IEC fuse versions - UL 508 Listed, File E320230, Guide NRNT - culus Certified 22.2 No IEC AC23A - IEC DC23A Terminals Single/dual conduct box lug spade terminal suitable f line, load accessy connection Tque 18-10AWG 20 Lb-In 8-4AWG 35 Lb-In Stage and Operating Temperature -20ºC to 75ºC* * F fuse perfmance under above 25ºC, consult fuse perfmance derating charts in the Bussmann publication titled Selecting Protective Devices (SPD), reder #3002. Flammability Rating UL 94V0 Lockout/Tagout Provisions 4mm shank lock Brady pin-out device, part number Mounting 35mm DIN-Rail Local Open Fuse Indication Minimum Voltage** 90Vac f AC versions 12Vdc f DC versions ** Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Data Sheet: 1157 Features IP20 Finger-safe construction with #10 larger wire Switch interlock prohibits removing the fuse under load Accessies Auxiliary contacts PLC Wired remote fuse indication Padlock Provision Open Fuse Indication Light Switch Handle Fuse Holder Knob Circuit Marking Area Spade Terminal Box Lug Terminal Available Bussmann Fuses Fuse Data Class Type/Description Volts Sheet # CC LP-CC Time-Delay, Current Limiting 600Vac/300Vdc 1023 CC FNQ-R Time-Delay 600Vac/300Vdc 1014 CC KTK-R Fast-Acting 600Vac 1015 M FNM Time-Delay 250Vac 2028 M FNQ Time-Delay 500Vac 1012 M KTK Fast-Acting 600Vac 1011 M BAF Fast-Acting 250Vac 2011 M KLM Fast-Acting 600Vac/dc 2020 gg/gl C10G 500V (400V@32A) am C10M 500V (400V@20@25A) Visit us on the web at

5 Compact Circuit Protect (CCP) Disconnect Switch 30A 1-, 2- & 3-Pole, Class CC, UL Midget & 10x38mm IEC Dimensions mm (in) Class CC, UL Midget & I0x38 IEC 45 (1.8) 17.5 (0.7) 35 (1.4) 52.5 (2.1) 49.2 (1.9) 79.8 (3.1) 92.7 (3.7) Auxiliary Contacts PLC Indicat (Includes leads with spade terminals) CCP-_-30_ Accessies Max Minimum Per Signal Circuit Agency Part Description CCP Output Voltage Infmation Number UL 98 Recognized, Auxiliary Contacts NONC 1 per CCP 5A/ curus 22.2 No. 4-04, f Switch Status (1-, 2-3-pole) 240Vac IEC AC15 CCP-AUX* PLC Fuse Monit f Open 1 per CCP 24Vdc/ UL 98 Recognized, 100Vac Fuse Indication (1-, 2-3-pole) 10mA curus 22.2 No CCP-PLC-IND* * Refer to Data Sheet # 1157 f details. Visit us on the web at 5

6 Compact Circuit Protect (CCP) Disconnect Switch 30, 60 & 100A 1-, 2- & 3-Pole, Class CF CUBEFuse Specifications Data Sheet: 1157 UL No. Max Hsepower Rating* Wire Size Amp Fuse of (See Note Wire Part Rating Class Poles Volts SCCR Vac Vac Vac Vac f Tque ) Type Number Agency Infmation 30 CF 1 600Vac 200kA Vdc 100kA Single/Dual CCP-1-30CF UL 98 Listed, culus 22.2, No CF 2 600Vac 200kA AWG 125Vdc 100kA Sol/Str CCP-2-30CF UL 98 Listed, culus 22.2, No CF 3 600Vac 200kA Vdc 100kA Single CCP-3-30CF UL 98 Listed, culus 22.2, No CF 1 600Vac 200kA 4AWG 3 125Vdc 100kA Sol/Str 75 C CCP-1-60CF UL 98 Listed, culus 22.2, No CF 2 600Vac 200kA Cu Vdc 100kA Spade higher CCP-2-60CF UL 98 Listed, culus 22.2, No CF 3 600Vac 200kA Terminal** Vdc 100kA CCP-3-60CF UL 98 Listed, culus 22.2, No Single 100 CF 1 600Vac 200kA AWG CCP-1-100CF UL 98 Listed, culus 22.2, No Sol/Str 100 CF 2 600Vac 200kA AWG Str Dual CCP-2-100CF UL 98 Listed, culus 22.2, No AWG Str 100 CF 3 600Vac 200kA Spade CCP-3-100CF UL 98 Listed, culus 22.2, No Terminal** * With time-delay Low-Peak CUBEFuse. ** Spade terminal with a 4.3mm gap f a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG A: 18-10AWG 20 Lb-In, 8-6AWG 35 Lb-In, 4AWG 35 Lb-In A: 18-10AWG Single 25 Lb-In, 8-1AWG Single 35 Lb-In, 6AWG Dual 45 Lb-In. Agency Infmation CE Compliant RoHS Compliant UL 98 Listed, File E302370, Guide WHTY culus to CSA Standard 22.2 No. 4-04, File , Guide WHTY7 Terminals Single/dual conduct box lug spade terminal suitable f line, load accessy connection Tque: 0-60A: AWG 20 Lb-In - 8-6AWG 35 Lb-In - 4AWG 35 Lb-In A: AWG Single 25 Lb-In - 8-1AWG Single 35 Lb-In - 6AWG Dual 45 Lb-In Fuses Uses finger-safe Class CF CUBEFuse with Class J perfmance Low-Peak dual-element, time-delay* - Non-indicating 1-100A - Indicating 6-100A Fast-acting, non-indicating 1-100A** * See Data Sheet # 9000 ** See Data sheet # 2147 Stage and Operating Temperature -20ºC to 75ºC*** *** F fuse perfmance under above 25ºC, consult fuse perfmance derating charts in the Bussmann publication titled Selecting Protective Devices (SPD) reder #3002. Flammability Rating UL 94V0 Lockout/Tagout Provisions 4mm shank lock Brady pin-out device, part number Mounting 35mm DIN-Rail Local Open Fuse Indication Minimum Voltage 90Vac/115Vdc Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Features Ampacity rejecting disconnects will not accept CUBEFuse amp ratings greater than switch rating IP20 Finger-safe construction with 10AWG (6mm2) wire larger Built-in switch interlock capability prohibits removing the fuse under load Accessies Auxiliary contacts PLC Wired remote fuse indication CUBEFuse pullers (P/Ns: CFP-30, CFP-60, CFP-100) Circuit Marking Area Lockout Provision Fuse Holder Switch Handle Open Fuse Indication Light Spade Terminal Box Lug Terminal 6 Visit us on the web at

7 Compact Circuit Protect (CCP) Disconnect Switch 30, 60 & 100A 1-, 2- & 3-Pole, Class CF CUBEFuse Dimensions mm (in) 30 and 60 Amp 25.1 (1.0) 50.4 (2.0) 75.7 (3.0) 49.2 (1.9) 75.1 (3.0) 60.3 (2.4) 30A CUBEFuse 83.3 (3.3) 60A CUBEFuse 89.1 (3.5) 9.1 (0.4) (4.5) 7.6 (0.3) 100 Amp (1.0) 50.5 (2.0) 79.5 (3.0) 56.6 (2.2) 67.7 (2.7) 91.2 (3.6) (3.9) (5 8) Auxiliary Contacts PLC Indicat (Includes leads with spade terminals) CCP-_-_CF Accessies Max Minimum Per Signal Circuit Agency Part Description CCP Output Voltage Infmation Number UL 98 Recognized, Auxiliary Contacts NONC 1 per CCP 5A/ curus 22.2 No. 4-04, f Switch Status up to 60A (1-, 2-, 3-Pole) 240Vac IEC AC15 CCP-AUX* Auxiliary Contacts NONC 1 per CCP 5A/ UL 98 Recognized, f Switch Status 70 to 100A (1-, 2-, 3-Pole) 240Vac CSA C22.2 No. 4 CCP-AUX-100* PLC Fuse Monit f Open 1 per CCP 24Vdc/ UL 98 Recognized, 100Vac Fuse Indication 70 to 100A (1-, 2-, 3-Pole) 10mA curus 22.2 No CCP-PLC-IND* PLC Fuse Monit f Open 1 per CCP 24Vdc/ UL 98 Recognized, 100Vac Fuse Indication 70 to 100A (1-, 2-, 3-Pole) 10mA CSA C22.2 No. 4 CCP-PLC-100* * Refer to Data Sheet # 1157 f details. Visit us on the web at 7

8 UL 98 Fused Rotary Disconnect Switches 30 to 800A Description Bussmann UL 98 and UL 489 fused disconnect switches break and make power circuits ON and OFF load. The switches employ double break contacts per pole that help ensure complete isolation of the fuse when the switch is in the "OFF" position. Features Make and break power under load Double break by pole DIN-Rail panel mount (30-100A) Up to 200kA Sht-Circuit Current Rating Finger-safe covers Compact footprints available Defeatable handles automatically re-latch when the panel do is closed Most disconnect switches are front, right side, flange direct handle operable NFPA 79 Compliant handle kits Agency Infmation UL 98, Guide WHTY, File E UL 489, Guide WJAZ, File E CSA 22.2 No. 4, File Confms with IEC NFPA 79 (2002 Edition) Online Resources Visit f: CAD Drawings Instruction Sheets UL Infmation QuikShip Everyday Service ships the most common part numbers within 24 hours. Contact your Bussmann representative f details. Available Bussmann Fuses Class Type Data Sheet # CC LP-CC Time-Delay, Current Limiting 1023 CC FNQ-R Time-Delay 1014 CC KTK-R Fast-Acting 1015 J LPJ Time-Delay, Current Limiting 1006 (0-60A) J 1007 (70-600A) J JKS Fast-Acting Fuses 1026 (0-60A) J 1027 (70-600A) J DFJ High Speed Drive Fuse 1048 (0-600A) L KRP-C Time-Delay, Current Limiting 1008 L KTU Fast-Acting 1010 L KLU Time-Delay Visit us on the web at

9 UL 98 Fused Rotary Disconnect Switches 30 to 800A UL Electrical Specifications RDF30CC-3 RDF30J-3 / RDF60J-3-COMP RDF60J-3 RDF200J-3 RDF600J-3 Part Number 2-Pole RDF30J-2 RDF60J-2-COMP RDF60J-2 RDF100J-2 RDF200J-2 RDF400J-2 RDF600J-2 RDF800L-2 3-Pole RDF30CC-3 RDF30J-3-COMP RDF30J-3 RDF60J-3-COMP RDF60J-3 RDF100J-3 RDF200J-3 RDF400J-3 RDF600J-3 RDF800L-3 3-Pole Neutral RDF30CC-3N RDF30J-3N-COMP 4-Pole RDF30J-4 RDF60J-4-COMP RDF60J-4 RDF100J-4 RDF200J-4 RDF400J-4 RDF600J-4 RDF800L-4 UL Standard UL 489 UL 489 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 Fuse Class CC J J J J J J J J L Max Fuse/Ampacity Switch Type Compact Compact Standard Compact Standard Standard Standard Standard Standard Standard Handle Operation Front Front Front/Side Front/Side Front/Side Front/Side Front/Side Front/Side Front Front Flange Flange Flange Flange Flange UL Electrical Ratings Max AC Volts 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac Max DC Volts* 250Vdc 250Vdc 250Vdc 250Vdc 250Vdc 600Vdc 600Vdc Std AC Hsepower Ratings 1-Phase, 240Vac Phase, 240Vac Phase, 480Vac Phase, 600Vac Max AC Hsepower Ratings 3-Phase, 240Vac Phase, 480Vac Phase, 600Vac DC Hsepower Ratings 125Vdc Vdc Electrical Characteristics SCCR 100kA 100kA 200kA 100kA 200kA 200kA 200kA 200kA 200kA 200kA Terminal Lugs/Kits Integral Integral Integral Integral Integral Integral Mounting Tque - Lb-In (N m) 160 (18) 310 (35) 310 (35) 310 (35) Wire Type 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al Wire Range & Tque - Lb-In (N m) Solid #14-10 #14-10 #14-10 #14-10 #12-10 # (3.1) 27 (3.1) 31 (3.5) 31 (3.5) 35.4 (4) 35.4 (4) Stranded #14-10 #14-10 #14-6 #14-6 #12-1 #12-1 #6-300MCM #4-600MCM (2) #2-600MCM (2) #2-600MCM 27 (3.1) 27 (3.1) 31 (3.5) 31 (3.5) 35.4 (4) 35.4 (4) 275 (31) 550 (62) 375 (42.4) 375 (42.4) Dual 1/0-250MCM 550 (62) Mechanical Characteristics Endurances/Cycles 10,000 10,000 10,000 10,000 10,000 10, Physical Characteristics Dimensions See drawings on product pages Weight - Lbs (KG) 2-Pole 3.0 (1.3) 3.1 (1.4) 4.0 (1.8) 4.07 (1.8) 5.7 (2.6) 11.4 (5.2) 31.7 (14.4) 31.7 (14.4) 3-Pole 1.3 (0.6) 1.4 (0.6) 3.8 (1.7) 4.1 (1.8) 5.3 (2.4) 5.3 (2.4) 7.8 (3.5) 16.6 (7.6) 44.2 (20.1) 44.2 (20.1) 3-Pole Neutral 1.4 (0.6) 1.5 (0.7) 4-Pole 4.7 (2.1) 4.8 (2.2) X.X (2.9) 6.49 (2.9) 10.8 (4.9) 21.8 (9.9) 56.8 (25.8) 56.8 (25.8) Environmental Operating Temp. Range -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C Flammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 Accessies Lug Kit Integral Integral Integral Integral Integral Integral Handles Direct Front Select Front Pistol Side Pistol Flange Cable Shaft NFPA Through Do Handle Shafts c/s - mm 5x5 5x5 10x10 10x10 10x10 10x10 10x10 10x10 12X12 12X12 Terminal Shrouds Not Required Not Required Not Required Not Required Not Required Not Required Auxiliary Contacts (1) NO (1) NC AC Ratings Volts Amps Available, see product page f details and part numbers. Not available. * General purpose only, not photovoltaic rated. Visit us on the web at 9

10 UL 98 Fused Rotary Disconnect Switches 30A Compact Class CC & Class J F a Complete Assembly, Please Select: Select f Standard Applications Accessies SWITCH AUXILIARY CONTACTS HANDLE (1) (2) Switch Max Hsepower Rating, 3-Ph Amp Fuse Number 220/ 440/ 600 Wire Wire Part Rating Class of Poles SCCR 240Vac 480Vac Vac Size Type Number 30 CC 3 100kA #14-10 Sol/Str 75 C Cu RDF30CC-3 30 CC 3 Ntrl* 100kA #14-10 Sol/Str 75 C Cu RDF30CC-3N 30 J 3 100kA #14-10 Sol/Str 75 C Cu RDF30J-3-COMP 30 J 3 Ntrl* 100kA #14-10 Sol/Str 75 C Cu RDF30J-3N-COMP * Neutral is switched. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number RDF30CC-_ Black Y Y DIR-05 RDF30J-_-COMP Black Y Y DIR-06 External Front Operated Select Handle - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-04B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-04R Shafts f Select Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 4.02~9.65 (102~245) SH (320) 4.02~14.37 (102~365) SH (400) 4.02~17.52 (102~445) SH1-400 X External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-05B 1, 3R, 12 Red/Yellow N Y Y H12-05R 1, 3R, 4, 4X, 12 Black N Y Y H4X-05B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-05TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-05TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-05BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05RHD Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 4.02~9.65 (102~245) SH (320) 4.02~14.37 (102~365) SH (400) 4.02~17.52 (102~445) SH2-400 X NFPA Through the Do Handle Kit - to be used with front pistol handle Test Part Col Function Padlockable Defeatable Number Red N Y N H79-1 and Auxillary Contacts Contact Number of Continuous Voltage Maximum Number of Auxiliary Contacts Part Type Contacts Amp Rating Rating per Disconnect Switch Part Number Number NO 1 10A 600Vac RDF30CC-_: 4 / 8 with BAC-HOLDER2 BAC05 (1) NC 1 10A 600Vac RDF30J-_-COMP: 2 /6 with BAC-HOLDER2 BAC06 (1) Auxillary Accepts 4 Auxillary Contacts: Contact BAC05 BAC06 Holder BAC-HOLDER2 (2) 10 Visit us on the web at

11 UL 98 Fused Rotary Disconnect Switches 30A Compact Class CC & Class J Dimensions in (mm) RDF30CC-_ RDF30J-_-COMP 5.19 (131.8) Fuse Cover Fully Open External Front Select Handle Select Handle Type Direction of Front Operation I Do Drilling Layout Ø3.07 Ø Ø Ø Ø 1.22 H4X-04_ Ø 31 External Front Pistol Handles Pistol Handle Type Ø3.07 Ø78 Direction of Front Operation I 90 Ø 0.88 With 4 Mounting Screws With Mounting Nut Ø 22.5 Do Drilling Layout 4 Ø Ø 7 Ø 1.46 Ø H4X-05 H TEST Visit us on the web at 11

12 UL 98 Fused Rotary Disconnect Switches 30A Standard Class J F a Complete Assembly, Please Select: Select f Standard Applications SWITCH HANDLE (1) (4) (3) (2) Switch Max Hsepower Rating 1-Phase 3-Phase DC* Amp Fuse No. of 220/ 220/ 440/ Wire Wire Part Rating Class Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number 30 J 2 200kA #14-10 Sol #14-6 Str 75 C Cu RDF30J-2 30 J 3 200kA #14-10 Sol #14-6 Str 75 C Cu RDF30J-3 30 J 4 200kA #14-10 Sol #14-6 Str 75 C Cu RDF30J-4 * DC Ratings use two poles in series. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y - On Switch DIR-07 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-05B 1, 3R, 12 Red/Yellow N Y Y H12-05R 1, 3R, 4, 4X, 12 Black N Y Y H4X-05B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-05TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-05TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-05BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05RHD External Right Side Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y N/A H4X-05SB 1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-05SR Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 5.30~9.06 (135~230) SH (320) 5.30~13.78 (135~350) SH (400) 5.30~16.93 (135~430) SH5-400 X Flange Handle (1) - requires shaft operated mechanism cable operated mechanism cable NEMA Flange Test Part Type Style Function Padlockable Defeatable Number 1, 3R, 4, 12 Standard N Y Y FLH1 1, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2 Shaft Operated Flange Mechanism (2) - includes shaft F Enclosure Part Depth - in (mm) Number 6~24 (152~613) FLRM Cable Operated Flange Mechanism and Cable - must select Mechanism (3) and Cable (4) Part Item / Length Number Cable Mechanism FLCM 36 (900mm) Cable FLC36 60 (1500mm) Cable FLC (3000mm) Cable FLC120 NFPA Through the Do Handle Kit - to be used with front pistol handle Test Part Col Function Padlockable Defeatable Number Red N Y N H Visit us on the web at

13 UL 98 Fused Rotary Disconnect Switches 30A Standard Class J Acc. AUX CONTACTS and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Number NO 1 10A 600Vac 4 BAC05 NC 1 10A 600Vac 4 BAC06 Dimensions in (mm) Direct Mount Handle Flange Handle (88.9) 2.16 (54.9) 0.86 (21.8) 1.06 (26.9) Ø0.50 (Ø12.7) Ø0.28 (Ø7.1) 1.55 (39.4) DIR (158.0) 7.10 (180.3) 2.32 (58.9) 5.66 (143.8) 2.70 (68.6) 1.00 (25.4) (25.4) (22.3) 4.68 (118.9) FLH_ External Front & Right Side Pistol Handle Handle Type Direction of Front Operation Direction of Right Side Operation Do Drilling Layout Ø3.07 Ø78 90 I 90 I 4 Ø Ø 7 Ø 1.46 Ø H4X-05 H TEST Visit us on the web at 13

14 UL 98 Fused Rotary Disconnect Switches 60A Compact Class J F a Complete Assembly, Please Select: Select f Standard Applications SWITCH HANDLE (1) (2) Switch Max Hsepower Rating 1-Phase 3-Phase DC* Amp Fuse Number 220/ 220/ 440/ Wire Wire Part Rating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number 60 J 2 100kA #14-10 Sol #14-6 Str 75 C Cu RDF60J-2-COMP 60 J 3 100kA #14-10 Sol #14-6 Str 75 C Cu RDF60J-3-COMP 60 J 4 100kA #14-10 Sol #14-6 Str 75 C Cu RDF60J-4-COMP * DC Ratings use two poles in series. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y - On Switch DIR-07 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-05B 1, 3R, 12 Red/Yellow N Y Y H12-05R 1, 3R, 4, 4X, 12 Black N Y Y H4X-05B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-05TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-05TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-05BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05RHD External Right Side Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y N/A H4X-05SB 1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-05SR Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 5.30~9.06 (135~230) SH (320) 5.30~13.78 (135~350) SH (400) 5.30~16.93 (135~430) SH5-400 X Flange Handle (1) - requires shaft operated mechanism cable operated mechanism cable NEMA Flange Test Part Type Style Function Padlockable Defeatable Number 1, 3R, 4, 12 Standard N Y Y FLH1 1, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2 Shaft Operated Flange Mechanism (2) - includes shaft F Enclosure Part Depth - in (mm) Number 6~24 (152~613) FLRM (4) (3) Cable Operated Flange Mechanism and Cable - must select Mechanism (3) and Cable (4) Part Item / Length Number Cable Mechanism FLCM 36 (900mm) Cable FLC36 60 (1500mm) Cable FLC (3000mm) Cable FLC120 NFPA Through the Do Handle Kit - to be used with select handle front pistol handle Test Part Col Function Padlockable Defeatable Number Red N Y N H Visit us on the web at

15 UL 98 Fused Rotary Disconnect Switches 60A Compact Class J Acc. AUX CONTACTS and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Number NO 1 10A 600Vac 4 BAC05 NC 1 10A 600Vac 4 BAC06 Dimensions in (mm) Direct Mount Handle Flange Handle (88.9) 2.16 (54.9) 0.86 (21.8) 1.06 (26.9) Ø0.50 (Ø12.7) Ø0.28 (Ø7.1) 1.55 (39.4) DIR (158.0) 5.66 (143.8) 1.00 (25.4) (25.4) (22.3) 4.68 (118.9) 7.10 (180.3) FLH_ 2.32 (58.9) 2.70 (68.6) External Front & Right Side Pistol Handle Handle Type Direction of Front Operation Direction of Right Side Operation Do Drilling Layout Ø3.07 Ø78 90 I 90 I 4 Ø Ø 7 Ø 1.46 Ø H4X-05 H TEST Visit us on the web at 15

16 UL 98 Fused Rotary Disconnect Switches 60A Standard Class J F a Complete Assembly, Please Select: Select f Standard Applications SWITCH HANDLE (1) (2) Switch Max Hsepower Rating 1-Phase 3-Phase DC* Amp Fuse Number 220/ 220/ 440/ Wire Wire Part Rating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number 60 J 2 200kA #12-10 Sol #12-1 Str 75 C Cu RDF60J-2 60 J 3 200kA #12-10 Sol #12-1 Str 75 C Cu RDF60J-3 60 J 4 200kA #12-10 Sol #12-1 Str 75 C Cu RDF60J-4 * DC Ratings use two poles in series. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y DIR-07 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-03B 1, 3R, 12 Red/Yellow N Y Y H12-03R 1, 3R, 4, 4X, 12 Black N Y Y H4X-06B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-06TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-06TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-06BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06RHD External Right Side Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y N/A H4X-06SB 1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-06SR Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 5.30~9.06 (135~230) SH (320) 5.30~13.78 (135~350) SH (400) 5.30~16.93 (135~430) SH5-400 X Flange Handle (1) - requires shaft operated mechanism cable operated mechanism cable NEMA Flange Test Part Type Style Function Padlockable Defeatable Number 1, 3R, 4, 12 Standard N Y Y FLH1 1, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2 Shaft Operated Flange Mechanism (2) - includes shaft F Enclosure Depth Part in (mm) Number 6~24 (152~613) FLRM (3) (4) Cable Operated Flange Mechanism and Cable - must select Mechanism (3) and Cable (4) Part Item / Length Number Cable Mechanism FLCM 36 (900mm) Cable FLC36 60 (1500mm) Cable FLC (3000mm) Cable FLC Visit us on the web at

17 UL 98 Fused Rotary Disconnect Switches 60A Standard Class J Acc. Select AUX CONTACTS NFPA HANDLE NFPA Through the Do Handle Kit - to be used with front pistol handle Test Part Col Function Padlockable Defeatable Number Red N Y N H79-2 and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Number NO 1 10A 600Vac 4 BAC05 NC 1 10A 600Vac 4 BAC06 Dimensions in (mm) Direct Mount Handle Flange Handle (88.9) 2.16 (54.9) 0.86 (21.8) 1.06 (26.9) Ø0.50 (Ø12.7) Ø0.28 (Ø7.1) 1.55 (39.4) DIR (158.0) 2.32 (58.9) 7.10 (180.3) FLH_ External Front and Right Side Pistol Handle 5.66 (143.8) 2.70 (68.6) 1.00 (25.4) (25.4) (22.3) 4.68 (118.9) Handle Type Direction of Front Operation Direction of Right Side Operation Do Drilling Layout Ø3.07 Ø78 90 I 90 I 4 Ø Ø 7 Ø 1.46 Ø H4X-06 H TEST Visit us on the web at 17

18 UL 98 Fused Rotary Disconnect Switches 100A Standard Class J F a Complete Assembly, Please Select: Select f Standard Applications SWITCH HANDLE (1) (2) Switch Max Hsepower Rating 1-Phase 3-Phase DC* Amp Fuse Number 220/ 220/ 440/ Wire Wire Part Rating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number 100 J 2 200kA #12-10 Sol #12-1 Str 75 C Cu RDF100J J 3 200kA #12-10 Sol #12-1 Str 75 C Cu RDF100J J 4 200kA #12-10 Sol #12-1 Str 75 C Cu RDF100J-4 * DC Ratings use two poles in series. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y DIR-07 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-03B 1, 3R, 12 Red/Yellow N Y Y H12-03R 1, 3R, 4, 4X, 12 Black N Y Y H4X-06B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-06TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-06TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-06BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06RHD External Right Side Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y N/A H4X-06SB 1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-06SR Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 5.30~9.06 (135~230) SH (320) 5.30~13.78 (135~350) SH (400) 5.30~16.93 (135~430) SH5-400 X Flange Handle (1) - requires shaft operated mechanism cable operated mechanism cable NEMA Flange Test Part Type Style Function Padlockable Defeatable Number 1, 3R, 4, 12 Standard N Y Y FLH1 1, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2 Shaft Operated Flange Mechanism (2) - includes shaft F Enclosure Depth Part in (mm) Number 6~24 (152~613) FLRM (4) (3) Cable Operated Flange Mechanism and Cable - must select Mechanism (3) and Cable (4) Part Item / Length Number Cable Mechanism FLCM 36 (900mm) Cable FLC36 60 (1500mm) Cable FLC (3000mm) Cable FLC Visit us on the web at

19 UL 98 Fused Rotary Disconnect Switches 100A Standard Class J Acc. Select AUX CONTACTS NFPA HANDLE NFPA Through the Do Handle Kit - to be used with front pistol handle Test Part Col Function Padlockable Defeatable Number Red N Y N H79-2 and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Number NO 1 10A 600Vac 4 BAC05 NC 1 10A 600Vac 4 BAC06 Dimensions in (mm) Direct Mount Handle Flange Handle (88.9) 2.16 (54.9) 0.86 (21.8) 1.06 (26.9) Ø0.50 (Ø12.7) Ø0.28 (Ø7.1) 1.55 (39.4) DIR (158.0) 7.10 (180.3) FLH_ 2.32 (58.9) 5.66 (143.8) 2.70 (68.6) 1.00 (25.4) (25.4) (22.3) 4.68 (118.9) External Front & Right Side Pistol Handle Handle Type Direction of Front Operation Direction of Right Side Operation Do Drilling Layout Ø3.07 Ø78 90 I 90 I 4 Ø Ø 7 Ø 1.46 Ø H4X-06 H TEST Visit us on the web at 19

20 UL 98 Fused Rotary Disconnect Switches 200 & 400A Standard Class J F a Complete Assembly, Please Select: Select f Standard Applications SWITCH LUGS HANDLE Switch Max Hsepower Rating 1-Phase 3-Phase DC* Amp Fuse Number 220/ 220/ 440/ Part Rating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Number 200 J 2 200kA RDF200J J 3 200kA RDF200J J 4 200kA RDF200J J 2 200kA RDF400J J 3 200kA RDF400J J 4 200kA RDF400J-4 * DC Ratings use two poles in series. Terminal Lug Kit Switch Number Lugs Part Amp Rating of Poles Per Kit Wire Range Wire Type Number #6-300MCM 75 C Cu/Al LUG #6-300MCM 75 C Cu/Al LUG #6-300MCM 75 C Cu/Al LUG #4-600MCM Dual 1/0-250MCM 75 C Cu/Al LUG #4-600MCM Dual 1/0-250MCM 75 C Cu/Al LUG #4-600MCM Dual 1/0-250MCM 75 C Cu/Al LUG2-4 Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y DIR-07 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 12 Black N Y Y H12-03B 1, 3R, 12 Red/Yellow N Y Y H12-03R 1, 3R, 4, 4X, 12 Black N Y Y H4X-06B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06R 1, 3R, 4, 4X, 12 Black Y Y Y H4X-06TB 1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-06TR Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-06BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06RHD External Right Side Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y N/A H4X-06SB 1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-06SR Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 200A: ( ) 400A: ( ) SH (320) 200A: ( ) 400A: ( ) SH (400) 200A: ( ) X 400A: ( ) SH Visit us on the web at

21 UL 98 Fused Rotary Disconnect Switches 200 & 400A Standard Class J Select f Standard Applications Accessies SHROUDS AUX CONTACTS HANDLE (1) (3) (4) Dimensions in (mm) RDF200J-3 (2) Flange Handle (1) 200A Only - requires shaft operated mechanism cable operated mechanism cable NEMA Flange Test Part Type Style Function Padlockable Defeatable Number 1, 3R, 4, 12 Standard N Y Y FLH1 1, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2 Shaft Operated Flange Mechanism (2) 200A Only - includes shaft F Enclosure Depth Part in (mm) Number 6~24 (152~613) FLRM Cable Operated Flange Mechanism and Cable 200A Only - must select Mechanism (3) and Cable (4) Part Item Number Cable Mechanism FLCM 36 (900mm) Cable FLC36 60 (1500mm) Cable FLC (3000mm) Cable FLC120 NFPA Through the Do Handle Kit - to be used with front pistol handle Use with Test Part Switch Col Function Padlockable Defeatable Number RDF200J-_ Red N Y N H79-2 RDF400J-_ Red N Y N H79-3 and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Part Number Number NO 1 10A 600Vac RDF200J- : 4 BAC05 NC 1 10A 600Vac RDF400J- : 8 BAC06 and Terminal Shrouds - includes terminal shroud f lineside loadside Switch Amp Number Part Rating of Poles Number TSH8-2TB TSH8-3TB TSH8-4TB TSH9-2TB TSH9-3TB TSH9-4TB RDF400J (3P) (4P) 259 (3P) (4P) Visit us on the web at 21

22 UL 98 Fused Rotary Disconnect Switches 200 & 400A Standard Class J Direct Mount Handle Flange Handle 3.50 (88.9) 2.16 (54.9) 0.86 (21.8) 1.06 (26.9) Ø0.50 (Ø12.7) Ø0.28 (Ø7.1) 1.55 (39.4) DIR (158.0) 7.10 (180.3) 2.32 (58.9) 5.66 (143.8) 2.70 (68.6) 1.00 (25.4) (25.4) (22.3) 4.68 (118.9) FLH_ External Front & Right Side Pistol Handle Handle Type Direction of Front Operation Direction of Right Side Operation Do Drilling Layout Ø3.07 Ø78 90 I 90 I 4 Ø Ø 7 Ø 1.46 Ø H4X-06 H TEST Terminal Lugs Ø Ø 0.4 Ø A LUG1-400A LUG2-22 Visit us on the web at

23 Open & Enclosed Rotary Disconnect Switches In-Stock and Ship Within 24 Hours The Bussmann QuikShip Everyday Service ensures the most common open and enclosed rotary disconnect switches ship within 24 hours to help you meet project timelines. Contact your Bussmann representative f details. Visit us on the web at 23

24 UL 98 Fused Rotary Disconnect Switches 600 & 800A Standard Class J & Class L F a Complete Assembly, Please Select: Select f Standard Applications Accessies SHROUDS AUX CONTACTS HANDLE SWITCH LUGS Switch Max Hsepower Rating, 3-Phase Amp Fuse Number 220/ 440/ Part Rating Class of Poles SCCR 240Vac 480Vac 600Vac Number 600 J 2 200kA RDF600J J 3 200kA RDF600J J 4 200kA RDF600J L 2 200kA RDF800L L 3 200kA RDF800L L 4 200kA RDF800L-4 Terminal Lug Kit Switch Number Lugs Part Amp Rating of Poles Per Kit Wire Range Wire Type Number (2) #2-600MCM 75 C Cu/Al LUG (2) #2-600MCM 75 C Cu/Al LUG (2) #2-600MCM 75 C Cu/Al LUG5-4 Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black Y Y DIR-08 External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-07B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-07R Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Test Part Type Col Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-07BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-07RHD Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 10.63~11.97 (270~304) SH (320) 10.63~16.69 (270~424) SH (400) 10.63~19.84 (270~504) SH7-400 X NFPA Through the Do Handle Kit - to be used with front pistol handle F Switch Test Part Part Number Col Function Padlockable Defeatable Number All Switches Red N Y N H79-4 and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Aux Part Type Contacts Amp Rating Rating Contacts per Switch Number NO 1 10A 600Vac 8 BAC05 NC 1 10A 600Vac 8 BAC06 and Terminal Shrouds - includes terminal shroud f lineside loadside Switch Amp Number Part Rating of Poles Number TSH10-2TB TSH10-3TB TSH10-4TB 24 Visit us on the web at

25 UL 98 Fused Rotary Disconnect Switches 600 & 800A Standard Class J & Class L Dimensions in (mm) RDF600J-3 RDF800L-3 min min (3P) (4P) 284 (3P) (4P) fix 9.84 fix Fuse Cover Fully Open Ø 0.51 Ø (3P) (4P) 364 (3P) (4P) Direct Mount Handle External Front Pistol Handle Handle Type Ø3.07 Ø Direction of Front Operation I Do Drilling Layout 4 Ø Ø 7 Ø 1.46 Ø DIR Terminal Lugs Ø10.2 H4X to 800A LUG5- Visit us on the web at 25

26 UL 98 Non-Fused Rotary Disconnect Switches 30 to 1200A Description Bussmann UL 98 non-fused rotary disconnect switches are versatile switches that break and make power circuits ON and OFF load. Features Make and break power under load Up to 200kA SCCR Panel mount (30-100A compact DIN-Rail panel mount) Disconnect switches are front, right side and direct handle operable (30-100A) Finger-safe (30-100A compact only) Fully visualized breaking ( A) Agency Infmation UL98, Guide WHTY, File E CSA 22.2 No. 4, File Confms with IEC Online Resources Visit f: CAD Drawings Instruction Sheets UL Infmation QuikShip Everyday Service ships the most common part numbers within 24 hours. Contact your Bussmann representative f details. Related Bussmann Products Fuse Blocks Data Sheet # Modular Knifeblade Fuse Blocks A 3192 Class J Power Distribution Fuse Blocks A Fuses Holders CH Series Class CC, Midget & 10x A 3185 Finger-Safe Optima Series 0-30A 1102 Optima Protection Modules 0-30A 1109 CH Series Class J 0-60A 2144 IEC Electrical Specifications RD30-3 RD200-3 RD600-3 Part Number 3-Pole RD30-3 RD60-3 RD100-3 RD100-3-SCCR RD200-3 RD400-3 RD600-3 RD800-3 RD RD Pole RD200-4 RD400-4 RD600-4 RD800-4 RD RD Thermal Current I 40 C (A) Rated insulation voltage Ui (V) Rated impulse withstand voltage Uimp (kv) Rated Operation Currents I e (A) Rated Voltage Load Duty Categy A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) A (1) 400Vac AC-22 A Vac AC-23 A Vac AC-22 A Vac AC-23 A Operational Power (Vac) in AC-23 (kw) 400V w/o prebreak AC (1)(2) V w/o prebreak AC (1)(2) V w/o prebreak AC (1)(2) Overload Capacity (U e 415Vac) Rated sht-circuit making capacity I cm(ka peak) (3) Fuse Protected Sht-Circuit Withstand (ka rms prospective) Sht-Circuit Current (ka) (3) Associated Fuse Rating (A) (3) Connection Minimum Cu cable cross section (mm 2 ) x150 2x185 2x240 Minimum Cu busbar section (mm 2 ) 2x30x5 2x40x5 2x50x5 2x60x5 Maximum Cu cable section (mm 2 ) (1) A/B: Categy with index A = frequent operation; categy with index B = infrequent operation. (2) The power value is given f infmation only; the current values vary from one manufacturer to another. (3) F a rated operating voltage, Ue = 400Vac. 26 Visit us on the web at

27 UL 98 Non-Fused Rotary Disconnect Switches 30 to 1200A UL Electrical Specifications RD30-3 RD200-3 RD600-3 Part Number 3-Pole RD30-3 RD60-3 RD100-3 RD100-3-SCCR RD200-3 RD400-3 RD600-3 RD800-3 RD RD Pole RD200-4 RD400-4 RD600-4 RD800-4 RD RD UL Standard UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 Max Ampacity 30A 60A 100A 100A 200A 400A 600A 800A 1000A 1200A Switch Type Compact Compact Compact Standard Standard Standard Standard Standard Standard Standard Handle Operation Front/Side Front/Side Front/Side Front Front Front Front Front Front Front UL Electrical Ratings Max Voltage (AC) 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac Max Voltage (DC) 250Vdc 250Vdc 250Vdc Maximum AC Hsepower Ratings 1-Phase, 120Vac Phase, 240Vac Phase, 240Vac Phase, 480Vac Phase, 600Vac DC Hsepower Ratings 125Vdc Vdc 50 Electrical Characteristics SCCR with Fuse 100kA 100kA 25kA/100kA* 200kA 200kA 200kA 200kA 100kA 100kA 100kA Fuse Class J J J J J J J L L L Max. Fuse Rating 30A 60A 100A 100A 200A 400A 600A 800A 1000A 1200A Terminal Lugs/Kits Integral Integral Integral Lug Mounting Tque - Lb-In (N m) (18) 160 (18) LUG2-_ 310 (35) 310 (35) 310 (35) 310 (35) 310 (35) LUG3-_ 398 (45) Wire Type 75 C Cu 75 C Cu 75 C Cu 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al 75 C Cu/Al Wire Range & Tque - Lb-In (N m) Solid #12-10 #12-10 # (4) 35.4 (4) 35.4 (4) Stranded #10-1 #10-1 #10-1 #6-300MCM #6-300MCM LUG2-_ #4-600MCM (2) #2-600MCM (4) #2-600MCM (4) #2-600MCM (4) #2-600MCM 35.4 (4) 35.4 (4) 35.4 (4) 275 (31) 275 (31) 550 (62) 375 (42.4) 375 (42.4) 375 (42.4) 375 (42.4) 1/0 1/0 1/0 Dual 1/0-250MCM 39.8 (4.5) 39.8 (4.5) 39.8 (4.5) 550 (62) 2/0 2/0 2/0 LUG3-_:(2) # (5) 44.3 (5) 44.3 (5) 200 (22.6) (2) #1-350MCM 375 (42.4) Mechanical Characteristics Endurances/Cycles 10,000 10,000 10,000 10, Physical Characteristics Dimensions See drawings on product pages Weight - Lbs (KG) 3-Pole 1.3 (0.6) 1.3 (0.6) 1.3 (0.6) 4.2 (1.91) 4.2 (1.91) 10.0 (4.6) 18.1 (8.2) 19.6 (8.9) 19.6 (8.9) 19.6 (8.9) 4-Pole 5.0 (2.3) 12.3 (5.6) 23.9 (10.9) 25.3 (11.5) 25.3 (11.5) 25.3 (11.5) Environmental Operating Temperature -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C -20 C to 70 C Flammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 Accessies Lug Kit Part # 3-Pole Integral Integral Integral 4-Pole Handles NEMA 1, 3R, 12 NEMA 1, 3R, 4, 4X, 12 Direct Front Pistol Front Side Select Shaft c/s - mm 5x5 5x5 5x5 10x10 10x10 10x10 12x12 12x12 12x12 12x12 Shaft Guide Shrouds Additional Pole Accessy Auxiliary Contacts NO NC (2) NO Available, see product page f details and part numbers. Not available. * 600Vac, 480Vac. Visit us on the web at 27

28 UL 98 Non-Fused Rotary Disconnect Switches 30, 60 and Compact 100A F a Complete Assembly, Please Select: Select f Standard Applications Acc s SWITCH HANDLES AUX CONTACTS (1) (1) (2) (2) Switch Max Hsepower Rating Switch 1-Phase 3-Phase Amp No. of / 220/ 440/ 600 Wire Wire Part Rating Poles SCCR Vac 240Vac 240Vac 480Vac Vac Size Type Number kA #10-2/0 Str #12-10 Sol 75 C Cu RD kA #10-2/0 Str #12-10 Sol 75 C Cu RD /100kA* #10-2/0 Str #12-10 Sol 75 C Cu RD100-3 * 600Vac. Direct Mount Handle - mounts directly to switch, no shaft required F Switch Test Part Part Number Col Function Padlockable Number All Switches Black N Y - On Switch DIR-02 External Front Right Side Operated Select Handles - shaft required NEMA Handle Test Part Type Col Length Function Padlockable Number 1, 3R, 4, 4X, 12 Black Sht N Y H4X-01B (1) 1, 3R, 4, 4X, 12 Red/Yellow Sht N Y H4X-01R (1) 1, 3R, 4, 4X, 12 Black Long N Y H4X-02B (2) 1, 3R, 4, 4X, 12 Red/Yellow Long N Y H4X-02R (2) External Front Operated Pistol Handles - shaft required NEMA Handle Test Part Type Col Length Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-03B 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-03R Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft required NEMA Handle Test Part Type Col Length Function Padlockable Defeatable Number 1, 3R, 4, 4X, 12 Black N Y Y H4X-03BHD 1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-03RHD Shafts f Select Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 5.9 (150) 3.50~7.60 (89~193) SH4-150 (1) 7.9 (200) 3.50~9.50 (89~241) SH4-200 (1) 12.6 (320) 3.50~14.9 (89~378) SH4-320 (1) X Shafts f Pistol Handles Length Mounting Depth Part in (mm) (X) in (mm) Number 7.9 (200) 3.30~7.40 (84~188) SH3-200 (2) 12.6 (320) 3.30~9.30 (84~236) SH3-320 (2) 15.7 (400) 3.30~14.7 (84~373) SH3-400 (2) X Shaft Guide f Select Handles Part Number Required f 12.6 (320mm) long shafts, optional f other lengths SH-GUIDE1 Shaft Guide f Pistol Handles Part Number Required f 15.7 (400mm) long shafts, optional f other lengths SH-GUIDE2 and Auxillary Contacts Contact Number of Continuous Voltage Max Number of Part Type Contacts Amp Rating Rating Units per Switch Number NO NC 1 of each 10A 240Vac 2 (1 per side/4 contacts total) BAC01 NO 2 10A 240Vac 2 (1 per side/4 contacts total) BAC02 28 Visit us on the web at

29 UL 98 Non-Fused Rotary Disconnect Switches 30, 60 and Compact 100A Accessies SHROUDS SW. 4 TH POLE and Terminal Shrouds - includes terminal shroud f both lineside and loadside Switch Amp Number Location on Part Rating of Poles Switch Number All Switches 1 (f switched 4 th pole) Lineside and Loadside TSH3-1TB All Switches 3 Lineside and Loadside TSH3-3TB and Switched 4 th Pole - converts 3-pole switch to 4-pole Switch Amp Part Rating Number 30 POLE POLE POLE Auxiliary Contact Configurations Possible 4 th Pole Configurations Dimensions - in (mm) Direct Handle Operation External Front Operation min./14.65 max min./372 max External Right Side Operation min./7.91 max min./201 max Handle Type M5 1. Position f 1 switched 4 th pole (1 per device max.) 1 auxiliary contact. 2. Position f 1 auxiliary contact only. Note: Maximum of 4 auxiliary contacts, 3 auxiliary contacts one switched 4 th pole. External Front/Right Side Operated Select Handle, Front Operated Pistol Handle Ø3.07 Ø M5 Do Drilling Layouts Select H4X-01_ Ø3.07 Ø Direction of Front Operation 90 I 0 Direction of Right Side Operation 90 I 4 Ø Ø Ø 1.22 Ø 31 Ø 0.88 With 4 Mounting Screws Ø With Mounting Nut Select H4X-02_ Ø Ø 7 Pistol H4X-03_ Ø 1.45in/37mm Screw clip (from front) Ø 1.22in/31mm Screw (from rear) H4X-03_ With 4 Mounting Screws Visit us on the web at 29