SIRCO M and MV Universal load break switches from 16 to 160 A

Size: px
Start display at page:

Download "SIRCO M and MV Universal load break switches from 16 to 160 A"

Transcription

1 SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV direct operation Function 4 pole SRCO M direct operation SRCO M and MV are manually operated modulable and modular multipolar load break switches. They make and break under load conditions and provide safety isolation for any low voltage circuit, particularly for machine control circuits. Advantages Total integration The SRCO M and MV fully integrate isolation, breaking and switching functions. Within a single product, SRCO M offers front, right side or left side operation. Their highly functional design enables the product to be easily transformed from a load break switch to a changeover switch, offering a highly innovative modular solution for numerous applications. A wide range of accessories A single standard module, which can be complemented with a choice of accessories, offers a range of advantages: Simplicity when choosing the device. Flexibility to adapt to the most varied applications. Reduction in the cost of management and storage. Upgradeability ts wide range of accessories means that the SRCO M can be upgraded even after it has been commissioned, enabling future requirements to be met. Through the use of accessories, SRCO M can be transformed into multipolar load break or 3/4 pole changeover switches. SRCO M changeover switches provide on load changeover switching between two sources or two low voltage power circuits, as well as their safety isolation. Compliance with major certifications and approvals The SRCO M and MV range of load break switches have been designed, qualified and tested according to the criteria defined by standards EC , UL58 and UL98. This process guarantees a high quality level for the product which is fully adapted to arduous operating environments. General characteristics Double break per pole. Mounting options: DN rail, panel or modular panel with 45 mm front cut out. P accessories and device. Severe utilisation categories (AC- and AC-3). Specific characteristics SRCO M: Positive break indication. Contact point technology. Product can be mounted directly on the door or panel side; see "Door mounting kit" in the accessory section. SRCO MV: Visible double breaking based on a sliding contact system (SRCO type, see page Positive break indication. Strong points > Total integration > A wide range of accessories > Upgradeability > Compliance with major certifications and approvals > Specific characteristics Conformity to standards > EC > Other standards available *See pages SRCO UL and CSA range Approvals and certifications (1) (1) Product reference on request. * 6 General Catalogue 17-18

2 SRCO M and MV from 16 to 16 A What you need to know SRCO M SRCO M can be operated in 3 different ways: SRCO MV 3 operations are available: sircm_3_c_1_x_cat sircm_34_a x_cat sircm_33_a_1_x_cat sircm a x_cat sircm_9_c x_cat sircm_3_a_1_x_cat Complete switch body for toggle operation Direct front operation with handle External operation front, left side or right side The SRCO M is a 3 pole load break switch which is available from 16 to 15 A. t can be combined with a switched 4 th pole, an unswitched neutral or PE pole and pre-break and signalling auxiliary contacts. page 76). From 16 to 15 A, through the wide range of available accessories, it is possible to convert a 3 pole load break switch into a 4, 6 or 8 pole load break switch or a 3/4 pole changeover switch. Through use of its door mounting kit, SRCO M load break switches can be mounted on the panel door. sircm_173_a_1_cat switches - - Direct front operation External right side operation External front and left side operation SRCO MV can be ordered in 3 or 4 pole from 1 to 16 A. Two types of auxiliary contacts are available: - U-type pre-break, - M-type for signalisation. General Catalogue

3 SRCO M and MV from 16 to 16 A References SRCO M Rating (A) / Frame size poles Complete switch body toggle operation Switch body Direct handle SRCO M - from 16 to 15 A Door interlocked external front and right side handle (8) External left side handle (8) Front external handle for changeover switches (8) Shaft for external front and side handle (8) 4 th pole 16 A / M1 3 P (1)()(3) 1 A / M1 3 P (1)()(3) 11 5 A / M1 3 A / M1 4 A / M1 3 P (1)()(3) S type 1 - Black M type P Blue (4) Black Black P65 P65 3 P (1)()(3) Black 147A 5111 (4) 13 P (4) S, S type Red S type - Red/Yellow P65 147B 5111 S type Black P (4) Red/Yellow 15 mm P P (1)()(3) (4) 14 mm mm A / M 3 P (1)()(3) 16 8 A / M 3 P (1)()(3) 18 1 A / M3 15 A / M3 3 P 31 (1)()(3) M1 type Blue S type - Black P (4) Black P (4) 3 P 311 (1)()(3) Red/Yellow Black P65 Red/Yellow P P65 148B (4) S type - Black P65 148A 5111 S type - - Black P (1) Front and side operation. () For a 6-pole device in direct operation, order x 3 pole device + conversion kit (for external operation, add the shaft + the handle). (3) For an 8-pole device in direct operation, order x 3 pole device + x 4th poles + conversion kit (for external operation, add the shaft + the handle). (4) Defeatable handle. (5) Top and bottom. (6) Delivered with a direct handle. (7) Delivered with a shaft. (8) Other handles are available. Please see accessory pages. General Catalogue 17-18

4 SRCO M and MV from 16 to 16 A SRCO M Rating (A) / Frame size poles Complete switch body toggle operation Switch body SRCO M - from 16 to 15 A Unswitched neutral pole Unswitched protective earth module Auxiliary contact Terminal shrouds Door mounting kit 16 A / M1 3 P (1)()(3) A / M1 3 P (1)()(3) 5 A / M1 3 A / M1 4 A / M1 63 A / M 8 A / M 3 P (1)()(3) 3 P (1)()(3) 3 P (1)()(3) 1 P 55 1 P 59 3 P (1)()(3) 1 P 95 1 P 99 M type 1 contact NO + NC contact NC P (5) 3 P (5) 1 P (5) 3 P (5) 3/4 P Complete protection PX (7) Compact design (7) 6/8 P Steel support (7) 1 A / M3 15 A / M3 1 P P 311 (1)()(3) 1 P P (5) 3 P (5) 3/4 P Steel support (7) (1) Front and side operation. () For a 6-pole device in direct operation, order x 3 pole device + conversion kit (for external operation, add the shaft + the handle). (3) For an 8-pole device in direct operation, order x 3 pole device + x 4th poles + conversion kit (for external operation, add the shaft + the handle). (4) Defeatable handle. (5) Top and bottom. (6) Delivered with a direct handle. (7) Delivered with a shaft. (8) Other handles are available. Please see accessory pages. SRCO MV Rating (A) poles Switch body Direct handle SRCO M - from 1 to 16 A Door interlocked external front and right side handle (4) External left side handle (4) Shaft for external front and side handle (4) Auxiliary signal contact Pre-break auxiliary contact Terminal shrouds 3 P A 15 A 4 P P 31 4 P 41 3 P 316 Mb type Blue (1) M type Blue 99 5 S type - Black P () Black P () Red/Yellow P () S type - Black P65 149A 9111 Red/Yellow P65 149B 9111 S type 15 mm mm mm M type 1 contact NO + NC contact NC U type 1 contact NC contact NO P (3) 4 P (3) 16 A 4 P 416 (1) Standard. () Defeatable handle. (3) Top and bottom. (4) Other handles are available. Please see accessory pages. General Catalogue

5 SRCO M and MV from 16 to 16 A Accessories Direct operation handle For SRCO M Frame size Handle colour Handle Reference 16 8 / M1 M Blue M type (1) 16 8 / M1 M Red M type / M3 Blue M1 type (1) (1) Standard. For SRCO MV Rating (A) Handle colour Handle Reference 1 16 Blue Mb type (1) 1 16 Blue M type 99 5 (1) Standard. M handle acces_347_a M handle M1 handle acces_344_a acces_35_a Mb handle acces_359_a External handle operation - SRCO M S type handle Frame size 16 8 / M1 M Type Switch Switch poles 3/4 P 3/4 P Operation Front and side operation Front and side operation Handle colour Defeatable handle External P Reference Black P65 no Red/Yellow P65 no /4 P Front Black P65 no switches / M1 M switches - 3/4 P Front Black P65 no S type handle Handle Defeatable Frame size Type poles Operation colour External P handle Reference Switch 3/4 P (1) Front and side operation Black P55 yes Switch 3/4 P (1) Front and side operation Black P65 yes / Switch 3/4 P M1 M Front and side operation Red/Yellow P65 yes Switch 3/4 P Left side Black P65 no 147A 5111 Switch 3/4 P Left side Red/Yellow P65 no 147B 5111 Switch 6/8 P Front Black P55 yes / Switch 6/8 P Front Black P65 yes M3 Switch 6/8 P Front Red/Yellow P65 yes / M1 M 1 15 / M3 switches - - switches switches - - switches (1) Can also be used with 6 and 8 poles with front operation. 3/4 P Front Black P65 yes /4 P Front Black P65 yes /4 P Front Black P65 yes /4 P Front Black P65 yes S handle S handle acces_37_a_1_cat acces_341_a_1_cat 3 General Catalogue 17-18

6 SRCO M and MV from 16 to 16 A External operation handle - SRCO M (continued) S type handle Frame size 1 15 / M3 Type poles Operation Handle colour External P Defeatable handle Reference Switch 3/4 P Front and side operation Black P55 yes Switch 3/4 P Front and side operation Black P65 yes Switch 3/4 P Front and side operation Red/Yellow P65 yes Switch 3/4 P Left side Black P65 no 148A 5111 Switch 3/4 P Left side Red/Yellow P65 no 148B 5111 access_343_a S1 type handle Handle Defeatable Frame size Type poles Operation colour External P handle Reference / Switch 3/4 P () Front and side operation Black P65 yes M1 M3 Switch 3/4 P () Front and side operation Red/Yellow P65 yes / M1 M3 switches - - switches - - switches switches (1) Padlockable in 3 positions. () Can also be used with 6 and 8 pole devices from 16 to 4 A. 3/4 P Front Black P65 yes /4 P Front Black P65 yes (1) 3/4 P Front Black P65 yes /4 P Front Black P65 yes (1) S handle S1 handle acces_34_a_1_cat External operation handle - SRCO MV S type handle Rating (A) Type poles 1 16 Switch 3/4 P 1 16 Switch 3/4 P 1 16 Switch 3/4 P Operation Front and side operation Front and side operation Front and side operation Handle colour External P Defeatable handle Reference Black P55 yes Black P65 yes Red/Yellow P65 yes Switch 3/4 P Left side Black P65 no 149A Switch 3/4 P Left side Red/Yellow P65 no 149B 9111 S1 type handle Rating (A) Type poles Operation Handle colour External P Defeatable handle Reference 1 16 Switch 3/4 P Front Black P55 yes Switch 3/4 P Front Black P65 yes Switch 3/4 P Front Red/Yellow P65 yes Switch 3/4 P Right side Black P55 no Switch 3/4 P Right side Black P65 no Switch 3/4 P Right side Red/Yellow P65 no Switch 3/4 P Left side Black P65 no 141A Switch 3/4 P Left side Red/Yellow P65 no 141B 111 S handle S1 Handle acces_343_a acces_4_a cat General Catalogue

7 SRCO M and MV from 16 to 16 A Accessories (continued) Shaft for external handle SRCO M 3/4 P Frame size Type Length (mm) Reference S / S / S Switch 15 mm S / S / S Switch mm / S / S / S Switch 3 mm M1 M3 S1 Switch mm S1 Switch 3 mm S1 Switch 4 mm acces_346_a_1_cat SRCO M 6/8 pole load break switch and 3/4 pole changeover switch Rating (A) Type Length (mm) Reference S, S 6/8 P and changeover switch 15 mm / M1...M S, S 6/8 P and changeover switch mm S, S 6/8 P and changeover switch 3 mm S 6/8 P and changeover switch 15 mm / M3 S 6/8 P and changeover switch mm S 6/8 P and changeover switch 3 mm S1 6/8 P mm S1 6/8 P 3 mm / S1 6/8 P 4 mm M1 M S1 switch mm S1 switch 3 mm S1 switch 4 mm / S1 switch mm M3 S1 switch 3 mm Standard lengths: - 15 mm, - mm, - 3 mm, - 4 mm. Other lengths: Please consult us. For 3/4 pole switches, shaft extensions are for external front and side operation. For 6/8 pole switches and changeover switches, shaft extensions for front operation only. For SRCO MV Rating (A) Type Length (mm) Reference S Switch 15 mm S Switch mm S Switch 3 mm S1 Switch mm S1 Switch 3 mm S1 Switch 4 mm Shaft guide for external operation To guide the shaft extension into the external handle. Description To be ordered in multiples of Reference Shaft guide S and S / S 1 pieces 1419 Shaft guide S1 and S1 1 piece 149 This accessory enables the handle to engage the extension shaft with a misalignment of up to 15 mm. Required for a shaft length over 3 mm. acces_6_a cat 3 General Catalogue 17-18

8 SRCO M and MV from 16 to 16 A Additional pole for SRCO M Switched fourth pole module Frame size poles Type Reference 16 / M1 1 P switched 1 / M1 1 P switched 11 5 / M1 1 P switched 1 3 / M1 1 P switched 13 4 / M1 1 P switched / M 1 P switched 16 8 / M 1 P switched 18 1 / M3 1 P switched / M3 1 P switched 111 Adds one or two poles and transforms: - a 3 pole SRCO M into a 4 pole load break switch, - a 6 pole SRCO M into a 8 pole load break switch, - a 3 pole SRCO M into a 4 pole changeover switch. acces_3_a acces_33_a acces_34_a Neutral pole Frame size poles Type Reference 16 4 / M1 1 P unswitched / M 1 P unswitched / M3 1 P unswitched 511 Transforms the 3-pole switch into a 3-pole + solid neutral. 4 th pole Protective earth module N or PE Neutral pole N or PE Protective earth module Frame size poles Type Reference 16 4 / M1 1 P unswitched / M 1 P unswitched / M3 1 P unswitched 911 Adds 1 protective earth module pole to the switchdisconnector. N or PE N or PE Additional pole configuration N or PE N or PE sircm_78_a_1_gb_cat Terminal shrouds Top and bottom protection against direct contact with the terminals or connection parts. Available in 1 or 3 pole versions for SRCO M and in 3 or 4 pole versions for SRCO MV. An opening on each terminal cover makes it possible to insert a temperature measurement probe. For SRCO M Frame size poles Position Reference 16 4 / M1 1 P top and bottom / M1 3 P top and bottom / M 1 P top and bottom / M1 3 P top and bottom / M3 1 P top and bottom / M3 3 P top and bottom For SRCO MV Rating (A) poles Position Reference P top and bottom P top and bottom SRCO MV 3P SRCO M 3 P acces_37_a SRCO MV 4 P acces_3_a SRCO M 1 P acces_39_a acces_36_a General Catalogue

9 SRCO M and MV from 16 to 16 A Accessories (continued) M type auxiliary contacts Pre-break and signalisation of positions and by NO+NC or NO auxiliary contacts. They allow to anticipate the switching of the main poles. They can be mounted on the left or on the right side of the device. For SRCO M Frame size Number of AC Type of AC Reference / M1...M3 1 AC NO + NC AC NO For SRCO MV Rating (A) Number of AC Type of AC Reference AC NO + NC AC NO Characteristics Operating current e (A) 3 VAC Contact type Nominal current (A) AC-13 AC-15 NO + NC Auxiliary contact configurations for SRCO MV sircm_98_a_1_cat 1 1 For SRCO MV Rating (A) Number of AC Type of AC Reference AC NC AC NO Characteristics Max 4 auxiliary contacts ( modules). Pre-break is not guaranteed on the SRCO MV. Characteristics NO+NC auxiliary contacts: P with front operation. 1. Maximum "U" type auxiliary contacts.. Maximum "M" type auxiliary contact modules. Operating current e (A) Contact Nominal 5 VAC 4 VAC 4 VDC 48 VDC type current (A) AC-15 AC-15 DC-13 DC-13 NC NO U type M type Pre-break and signalisation by NO or NC auxiliary contact can be mounted on the device. Maximum auxiliary contacts. Only available for SRCO MV switches. acces_3_a Auxiliary contacts configurations for SRCO M Max: blocks / Max: AC NC NO + NC Pre-break No Pre-break sircm_188_a_1_x_cat sircm_48_a_1_x_cat Conversion kit t must be ordered together with the handle for external control. This accessory enables the assembly of two 3 pole switches (+ additional pole) in order to create : - a 6 or 8 pole SRCO M load break switch, - a 3 or 4 pole SRCO M changeover switch. Load break switches 6/8 P Frame size Type Reference 16 8 / M1 M 6/8 P switch / M3 6/8 P switch switches - - Frame size Type Reference 16 8 / M1 M switches / M3 switches General Catalogue SRCO M changeover switches provide on load changeover switching between two sources or two low voltage power circuits, as well as their safety isolation ( - - ); transfer without interruption of the supply is also possible ( ). switches Frame size Type Reference 16 8 / M1 M switches / M3 switches Conversion kit for 6 or 8 pole load break switches Conversion kit for changeover switches - - Conversion kit for changeover switches acces_348_a acces_35_a acces_49_a

10 SRCO M and MV from 16 to 16 A Door mounting kit (1) This kit enables a direct mounting of the switch on the door panel, on the right or left side of the panel. The connection clamps of the switch are always accessible. The external handle is quick and easy to install with the supplied internal locking nut mounted on the inside of the enclosure. 3 kits are available: - one for complete protection PX - one with compact design - one in steel for 6/8 P and 1/15 A. For SRCO M (1) Kit compatible with S type handle only. Frame size poles Description Reference 3/4 P Complete protection PX / M1 M 3/4 P Compact version /8 P Metallic support /4 P Metallic support acces_33_a 3/4 poles acces_331_a acces_33_a Cap for side operation mounting This accessory enables the front face of the SRCO M to be capped when the switch is side operated. pieces supplied per pack. For SRCO M Frame size Pack Reference / M1 M3 pieces This piece snaps into place directly on the front face of the switch. 6/8 pole sircm_16_a cat 6/8 pole joining accessory This accessory enables two 3/4 pole switches to be coupled in order to provide a 6 or 8 pole switch for external side operation. 4 pieces supplied per pack. For SRCO M Frame size Pack Reference 16 8 / M1 M 4 pieces DN rail locking clip This locking clip prevents the SRCO MV from sliding when DN rail mounted. For SRCO MV For multi-pole switches, please consult us. sircm_134_a cat Rating (A) Type Reference 1 16 Locking clip M Locking clip M acces_337_a Voltage sensing and power supply tap t allows connection of x 1.5 mm² voltage sensing or power cables. For SRCO MV Rating (A) Pack Reference 1 16 pieces This single-pole voltage sensing tap allows the connection of x 1.5 mm² voltage sensing or power cables to any SRCO MV power terminal without reducing its connection capacity. acces_336_a General Catalogue

11 SRCO M and MV from 16 to 16 A Characteristics Characteristics according to EC SRCO M - from 16 to 15 A Thermal current th (4 C) 16 A A 5 A 3 A 4 A 63 A 8 A 1 A 15 A Frame size M1 M1 M1 M1 M1 M M M3 M3 Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e (A) Rated voltage Utilisation category A/B (1) A/B (1) A/B (1) A/B (1) A/B (1) A/B (1) A/B (1) A/B (1) A/B (1) 415 VAC AC- A / AC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/ VAC AC-1 A / AC-1 B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/ VAC AC- A / AC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/ VAC AC-3 A / AC-3 B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 5 VAC AC- A / AC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 5 VAC AC-1 A / AC-1 B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 5 VAC AC- A / AC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 5 VAC AC-3 A / AC-3 B 16/16 / 5/5 5/5 5/5 63/63 63/63 8/8 1/1 69 VAC AC- A / AC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 69 VAC AC-1 A / AC-1 B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 69 VAC AC- A / AC- B 16/16 / 5/5 3/3 3/4 4/63 63/8 8/1 1/15 69 VAC AC-3 A / AC-3 B 16/16 / 5/5 5/5 5/5 4/4 4/4 63/63 63/63 11 VDC DC- A / DC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 11 VDC DC-1 A / DC-1 B 16/16 () / () 5/5 () 3/3 () 4/4 () 63/63 () 8/8 () 1/1 () 15/15 () 5 VDC DC- A / DC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 5 VDC DC-1 A / DC-1 B 16/16 (3) / (3) 5/5 (3) 3/3 (3) 4/4 (3) 63/63 (3) 8/8 (3) 1/1 (3) 15/15 (3) 4 VDC DC- A / DC- B 16/16 / 5/5 3/3 4/4 63/63 8/8 1/1 15/15 4 VDC DC-1 A / DC-1 B 16/16 (4) / (4) 5/5 (4) 5/5 (4) 5/5 (4) 4/4 (4) 4/4 (4) 63/63 (4) 63/63 (4) Operational power in AC-3 (kw) 4 VAC without pre-break AC(kW) (5) VAC without pre-break AC(kW) (5) VAC without pre-break AC(kW) (5) Fuse protected short-circuit withstand (ka rms prospective) (6) Prospective short-circuit current (ka rms) Associated fuse rating (A) Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than.3s Rated short-time withstand current.3s. cw (ka rms) Short-circuit capacity (without protection) Rated short-time withstand current 1s. cw (ka rms) Rated peak withstand current (ka peak) (6) Connection Maximum Cu cable cross-section (mm²) Maximum Cu cable cross-section (mm²) Tightening torque min/max (Nm) /. /. /. /. /. 3.5 / / /4.4 4/4.4 Mechanical characteristics Durability (number of operating cycles) Operating effort - 3 pole device (Nm) Operating effort - 4 pole device (Nm) Weight of a 3 pole device (kg) Weight of a 4 pole device (kg) Weight of a 6 pole device (kg) Weight of a 8 pole device (kg) Weight of a 3 pole device (kg) Weight of a 4 pole device (kg) (1) Category with index A = frequent operation - Category with index B = infrequent operation. () One pole per polarity. (3) 3-pole device with poles in series for the "+" and 1 pole for the "-". (4) 4-pole device with poles in series per polarity. (5) The power value is given for information only, the current values vary from one manufacturer to another. (6) For a rated operational voltage Ue = 415 VAC. 36 General Catalogue 17-18

12 SRCO M and MV from 16 to 16 A Characteristics Characteristics according to EC SRCO MV - from 1 to 16 A Thermal current th (4 C) 1 A 15 A 16 A Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e (A) Rated voltage Utilisation category A/B (1) A/B (1) A/B (1) 415 VAC AC- A / AC- B 1/1 15/15 16/ VAC AC-1 A / AC-1 B 1/1 15/15 16/ VAC AC- A / AC- B 1/1 15/15 16/ VAC AC-3 A / AC-3 B 1/1 15/15 15/16 5 VAC AC- A / AC- B 1/1 15/15 16/16 5 VAC AC-1 A / AC-1 B 1/1 15/15 16/16 5 VAC AC- A / AC- B 1/1 15/15 15/16 5 VAC AC-3 A / AC-3 B 8/8 1/1 1/1 69 VAC AC- A / AC- B 1/1 15/15 16/16 69 VAC AC-1 A / AC-1 B 1/1 15/15 16/16 69 VAC AC- A / AC- B 63/8 8/1 1/15 69 VAC AC-3 A / AC-3 B 63/63 8/8 8/8 11 VDC DC- A / DC- B 1/1 15/15 16/16 11 VDC DC-1 A / DC-1 B 1/1 () 15/15 () 16/16 () 5 VDC DC- A / DC- B 1/1 15/15 16/16 5 VDC DC-1 A / DC-1 B 1/1 (3) 15/15 (3) 16/16 (3) 4 VDC DC- A / DC- B 1/1 15/15 16/16 4 VDC DC-1 A / DC-1 B 1/1 (4) 15/15 (4) 16/16 (4) Operational power in AC-3 (kw) 4 VAC without pre-break AC(kW) (5) VAC without pre-break AC(kW) (5) VAC without pre-break AC(kW) (5) Fuse protected short-circuit withstand (ka rms prospective) (6) Prospective short-circuit current (ka rms) Associated fuse rating (A) Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than.3s Rated short-time withstand current.3s. cw (ka rms) Short-circuit capacity (without protection) Rated short-time withstand current 1s. cw (ka rms) Rated peak withstand current (ka peak) (6) Connection Maximum Cu cable cross-section (mm²) Maximum Cu cable cross-section (mm²) Tightening torque min/max (Nm) 4 / / / 4.4 Mechanical characteristics Durability (number of operating cycles) Operating effort - 3 pole device (Nm) Operating effort - 4 pole device (Nm) Weight of a 3 pole device (kg) Weight of a 4 pole device (kg) (1) Category with index A = frequent operation - Category with index B = infrequent operation. () One pole per polarity. (3) poles in series for the "+" and 1 pole for the "-". (4) poles in series per polarity. (5) The power value is given for information only, the current values vary from one manufacturer to another. (6) For a rated operational voltage Ue = 415 VAC. General Catalogue

13 SRCO M and MV from 16 to 16 A Dimensions SRCO M1 and M 16 to 8 A Toggle operation Direct operation with handle F 1 M F 1 M 1 sircm_5_b_1_x_cat G 68 N AC G 68 N AC sircm_53_b_1_x_cat F1 M5 T F Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth module or 1 auxiliary contact.. Position for 1 auxiliary contact module only. Note: max additional blocks F1 M5 T F Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth module or 1 auxiliary contact.. Position for 1 auxiliary contact module only. Note: max additional blocks. External front operation A B 36 C E External side operation 36 D F D M 1 1 J Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth module or 1 auxiliary contact.. Position for 1 auxiliary contact module only. Note: max additional blocks. 5 6 A. S Handle B. S1 Handle C. S Handle. G 68 N AC 8.8 F1 F1 8.8 T M5 ø 71 sircm_54_e_1_x_cat Overall dimensions Terminal shrouds Switch body Switch mounting Connection Frame size D min D max E min E max AC F F1 G J M N T 16 4 / M / M General Catalogue 17-18

14 SRCO M and MV from 16 to 16 A SRCO M1 and M 16 to 8 A (continued) Direct front operation for 6/8-pole load break switches or 3/4-pole changeover switches 1 X J F M F External front operation for 6/8-pole load break switches or 3/4-pole changeover switches 1 78 E A B C N G F1 F T T Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth A. S handle module or 1 auxiliary contact. B. S handle. Position for 1 auxiliary contact module only. C. S1 handle Note: max additional blocks. Overall dimensions Switch body Switch mounting Connection Frame size E min E max F F1 F G J M N T X 16 4 / M / M SRCO M3 1 to 15 A Direct operation with handle F M ø 71 8 sircm_18_d_1_x_cat sircm_56_d_1_x_cat G N AC 1. Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth module or 1 auxiliary contact.. Position for 1 auxiliary contact module only. Note: max additional blocks F1 T F M5 External front operation External side operation 37 E D 5.6 M F D 37 1 J 1 A B sircm_57_d_1_x_cat G N AC ø Location for: 1 switched fourth pole module (1 per device max.) or 1 unswitched neutral pole or 1 protective earth module or 1 auxiliary contact F1 T F1 8.8 M5. Position for 1 auxiliary contact module only. Note: max additional blocks. A. S1 handle B. S handle Overall dimensions Terminal shrouds Switch body Switch mounting Connection Frame size D min D max E min E max AC F F1 G J M N T 1 15 / M General Catalogue

15 SRCO M and MV from 16 to 16 A Dimensions (continued) SRCO M3 6/8 P and changeover switch M3 1 to 15 A Direct front operation for 3/4 pole changeover switches M 1 5 External front operation for 3 and 4 pole changeover switches 84.5 E 36 N G 68 ø 71 F1 8.8 F 79.6 T 1 1. Location for: 1 main pole or 1 auxiliary contact (See accessories. Position for 1 auxiliary contact module only. Note: max additional blocks. 6 pages 33 and 34). sircm_183_e_1_x_cat Overall dimensions Switch body Switch mounting Connection Frame size E min E max F F1 G M N T 1 15 / M SRCO MV 1 to 16 A Direct front operation A B External front operation 11 min. 357 max. C 69,9 37 9,5 D 44 8,8 8,8 14,6 131, ø sircm_58_c_1_x_cat 53 A. 3 poles B. 4 poles 6 6 M5 1 C. S type handle D. S1 type handle 1. Maximum 4 "M" type auxiliary contacts. Maximum "U" type auxiliary contacts External side operation A 69,9 5,6 B C min. D 3 max. 37 E 44 F 69,9 8,8 8, , A. Right side operation B. 3 poles C. 4 poles 6 M5 14,6 1 D. S type handle E. S1 type handle F. Left side operation ø Maximum 4 "M" type auxiliary contacts. Maximum "U" type auxiliary contacts sircm_59_d_1_x_cat 4 General Catalogue 17-18

16 SRCO M and MV from 16 to 16 A Dimensions for external handles SRCO M1 and M Side operation Direction of operation Direction of operation Door drilling S type Load break switches Right side operation With 4 fixing screws With fixing nut Ø 7 36 Ø 3. Ø poign_16_a_1_gb_cat Direction of operation Door drilling S type Transfer switches -- and or + With 4 fixing screws With fixing nut Ø 7 36 Ø Ø.5 3. poign_17_b_1_gb_cat Side operation Direction of operation Direction of operation Door drilling S type Load break switches Right side operation P55 with fixing clips 4 P65 with 4 fixing screws 4 Ø71 Ø 7 4 Ø Ø 37 Ø 31 Left side operation With fixing nut Ø.5 poign_4_a_1_gb_cat Direction of operation Door drilling S type Transfer switches -- and Ø71 71 or + P55 with fixing clips Ø 37 4 P65 with 4 fixing screws Ø 37 4 With fixing nut 13.5 Ø.5 3 poign_5_b_1_gb_cat 36 Ø 7 4 Ø 7 General Catalogue

17 SRCO M and MV from 16 to 16 A Dimensions for external handles SRCO M1 and M - 3/4 P and 6/8 P S1 type Load break switches Side operation Direction of operation Direction of operation Door drilling Right side operation P65 with 4 fixing screws Ø78 Ø Ø 7 4 poign_18_a_1_gb_cat Direction of operation Door drilling S1 type Transfer switches -- and or + P65 with 4 fixing screws 4 Ø Ø 37 4 Ø 7 poign_19_b_1_gb_cat SRCO M3 Side operation Direction of operation Direction of operation Door drilling S type Load break switches Right side operation P55 with fixing clips 4 P65 with 4 fixing screws 4 Ø71 Ø 7 4 Ø Ø 37 Ø 31 Left side operation With fixing nut Ø.5 poign_6_a_1_gb_cat S1 type Load break switches Side operation Direction of operation Direction of operation Door drilling Right side operation P65 with 4 fixing screws Ø Ø 37 4 Ø 7 4 poign_18_a_1_gb_cat 4 General Catalogue 17-18

18 SRCO M and MV from 16 to 16 A SRCO MV Side operation Direction of operation Direction of operation Door drilling S type Load break switches Right side operation P55 with fixing clips 4 P65 with 4 fixing screws 4 Ø71 Ø 7 4 Ø Ø 37 Ø 31 Left side operation With fixing nut Ø.5 poign_6_a_1_gb_cat Side operation Direction of operation Direction of operation Door drilling S1 type Load break switches Right side operation P55 with fixing clips 4 P65 with 4 fixing screws 4 Ø78 Ø 7 4 Ø Left side operation Ø 37 Ø 31 poign_7_a_1_gb_cat General Catalogue

Load break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?...

Load break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?... Load break switches Load break switches for all your applications.................................... Why choose a load break switch designed for photovoltaic applications?............. Load break switch

More information

SIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A

SIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong

More information

An innovative technology

An innovative technology The range An innovative technology Description The new are load break switches that combine attractive style and optimised features due to their innovative design. This range, dedicated to industrial applications,

More information

Non-fusable disconnect switches standards UL and CSA from 16 to 100 A

Non-fusable disconnect switches standards UL and CSA from 16 to 100 A Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages

More information

SIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A

SIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented

More information

SIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A

SIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.

More information

SIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points

SIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity

More information

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually

More information

FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A

FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong

More information

SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A

SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability

More information

SIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A

SIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They

More information

ATyS t M - ATyS g M Automatic Transfer Switching Equipment from 40 to 160 A

ATyS t M - ATyS g M Automatic Transfer Switching Equipment from 40 to 160 A TyS t M - TyS g M utomatic Transfer Switching Equipment Transfer switches new The solution for > High Rise uildings > Data centre > Healthcare buildings TyS g M I-0-II P atys-mg_001_b_1_cat Function TyS

More information

SIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.

SIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity

More information

SIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function

SIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole

More information

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are

More information

SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC

SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics

More information

ATyS S - ATyS d S Remotely operated Transfer Switching Equipment from 40 to 125 A

ATyS S - ATyS d S Remotely operated Transfer Switching Equipment from 40 to 125 A Transfer switches The solution for > Genset < 90 kva > Heating systems > Climate control > Ventilation systems > Telecommunications atys-s_018_a Strong points Function products are 4 pole remotely operated

More information

Contents. Volume 5 Motor Control and Protection CA E December

Contents. Volume 5 Motor Control and Protection CA E December Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions

More information

FUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A

FUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved

More information

125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request

125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request 125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for

More information

ATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A

ATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat

More information

SIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC

SIRCOVER and SIRCOVER BY-PASS. Changeover switches with fully visualised breaking from 125 to 3200 A. 274 General Catalogue SOCOMEC and Manual Changeover Switches BY-PSS appli_114_a svr_099_b_1_cat svr_059_a_1_cat Changeover switches with fully visualised breaking from 125 to 3200 Function products are manually operated multipolar

More information

SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC

SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar

More information

SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC

SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty

More information

ATyS range ATyS r, ATyS d, ATyS t, ATyS g, ATyS p from 125 to 3200 A

ATyS range ATyS r, ATyS d, ATyS t, ATyS g, ATyS p from 125 to 3200 A Transfer switches Accessories Terminal shrouds IPX protection against direct contact with terminals or connecting parts. Advantages Perforations allow remote thermographic inspection without the need to

More information

SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC

SIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC Load break switches SIRCO PV IEC 609473 new The solution for > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar

More information

SIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A

SIRCOVER UL1008/98 Changeover switches standards UL and CSA 100 to 1200 A Conformity to standards (1) Changeover switches svr-ul_14_b_1_cat > EC 6947-3 > UL98, Guide WHTY, file 1138 > UL18, Guide WPYV, file 31792 > CSA 22.2#4, Class 4651-2 (1) Product reference on request. svr_136_a_2_cat

More information

ATyS. 63 to 3200 A. Functions. Conformity to standards. General characteristics. Changeover switches. Functions

ATyS. 63 to 3200 A. Functions. Conformity to standards. General characteristics. Changeover switches. Functions to 00 A Accessories Enclosed Characteristics M e atysm_007_a cat M s atysm_0_a cat products are and 4pole switches remotely controlled by volt free contacts ( ) or automatic transfer switches ( ). They

More information

sirco-ul_004_b_cat 100A to 2000A - 600VDC and 1000VDC UL98B Listed

sirco-ul_004_b_cat 100A to 2000A - 600VDC and 1000VDC UL98B Listed site_317_a sirco-ul_22_b_cat sirco-ul_4_b_cat 1A to 2A - 6VDC and 1VDC UL98B Listed  Function non fusible disconnects are heavy duty switches that break and make 6VDC or 1VDC photovoltaic circuits on

More information

Switching, control and protection solutions for solar applications

Switching, control and protection solutions for solar applications Switching, control and protection solutions for solar applications continuous performance www.socomec.com Summary SIRCO M PV Manually operated modulable and modular switches p. 4 SIRCO MV PV Manually

More information

25A 25A 32A 40A 40A 63A 63A 80A

25A 25A 32A 40A 40A 63A 63A 80A ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A

More information

What you need to know. Â Conformity to standards

What you need to know.  Conformity to standards SIRCO PV Load break switches for solar applications sirco_343_a_1_cat  What you need to know A solar electrical installation is an application that requires switching devices fully meet the needs of operational

More information

Vistop TM isolating switches 63 to 160A

Vistop TM isolating switches 63 to 160A DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary

More information

Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.

Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches. disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance

More information

CATALOGUE MARINE APPLICATIONS. Energy performance solutions

CATALOGUE MARINE APPLICATIONS. Energy performance solutions CATALOGUE MARINE APPLICATIONS Energy performance solutions 2017 2018 Marine Certifications Our certified products As an independent manufacturer, we, at Socomec are committed to adapting the range and

More information

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A fuser_548_a_1_cat fuser_532_a_1_cat fuser_539_a_1_cat FUSERBLOC from 25 to 32 A FUSERBLOC from 630 to 1250 A FUSERBLOC from 32 to 400 A Function FUSERBLOC are manually operated multipolar fuse combination

More information

PowerLine OS Switch Fuses A, 690V

PowerLine OS Switch Fuses A, 690V Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected

More information

DPX Thermal magnetic and trip-free switches DPX 3 -I 160

DPX Thermal magnetic and trip-free switches DPX 3 -I 160 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY

More information

Motorised and automatic transfer enclosed switchess

Motorised and automatic transfer enclosed switchess s Integrated products and solutions coff_538_a.eps atysm_251_b_1_cat.eps The solution for > igh-rise buildings > Data centers > Energy generation > ealthcare buildings > Banks and insurance companies >

More information

500V / V /

500V / V / LOAD BREAK SWITCHES 125-630 A TECHNICAL DATA ATEX RoHS Compliant 2002/95/EC LOAD BREAK SWITCHES 16A 25A 40A 63A 80A 125A 160A KU / KU / KU / KU / KU / KU / VKA / VKA / KUE KUE KUE KUE KUE KUE EVA EVA VKA

More information

Protection components

Protection components Presentation, characteristics Presentation 1 2 3 motor circuit-breakers are 3-pole thermal-magnetic circuit-breakers standards IEC 60947-2 and IEC 60947-4-1. Connection These circuit-breakers are designed

More information

Load Break Disconnect Switches FSLBS

Load Break Disconnect Switches FSLBS Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable

More information

DCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

DCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC

More information

Breakers and Switches. Switches Change-over and transfer switches

Breakers and Switches. Switches Change-over and transfer switches Breakers and Switches Switches Change-over and transfer switches Change-over and transfer switches 16...2500 A Contents: 4 Product overview, features 8 Technical data 8 Manual, motorized and automatic

More information

LOAD BREAK SWITCHES. Ensto Compact

LOAD BREAK SWITCHES. Ensto Compact LOAD BREAK SWITCHES Ensto Compact Ensto Enclosures and Components Ensto also offers enclosed switches; being assemblies of Ensto Cubo enclosures and load break switches. Ensto is an international industrial

More information

15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250

More information

THE SANTON FCS-TYPE SWITCH DISCONNECT. Superior Switch Solutions

THE SANTON FCS-TYPE SWITCH DISCONNECT. Superior Switch Solutions THE SANTON FCS-TYPE SWITCH DISCONNECT Superior Switch Solutions The technical information given in this table applies to and pole fuse combination switches. A B NOMINAL RATING 0A A FUSE COMBINATION SWITCHES

More information

LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES TECHNICAL DATA

LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES TECHNICAL DATA LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES Complying with BSEN60947 and IEC 408 the RDMP range of rotary cam switches are suitable for on load switching of general distribution

More information

PowerLine Switch Fuses OESA_PL, A. Contents: Technical data... 9/2. Ordering information DIN-pattern... 9/3 BS-pattern...

PowerLine Switch Fuses OESA_PL, A. Contents: Technical data... 9/2. Ordering information DIN-pattern... 9/3 BS-pattern... Switch Fuses ESA_PL, A Contents: Technical data... /2 rdering information DN-pattern... /3 BS-pattern... /3 Accessories... /4 Dimension Drawings... /6 /1 Technical Data Switch Fuses ESA Technical Data

More information

MANUALLY OPERATED CHANGEOVER SWITCHES

MANUALLY OPERATED CHANGEOVER SWITCHES are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,

More information

3 - Protection components Motor circuit-breakers

3 - Protection components Motor circuit-breakers Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

A compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block.

A compact range of Switch-Disconnectors with the capacity to add auxiliary and neutral block options to the basic load break switch block. PNE ISOTORS Craig & Derricott has a range of products designed specifically for control panel and switchboard construction. Most panels require a means of electrical isolation and the can offer variants

More information

SD Series Non-Fused Load Switches

SD Series Non-Fused Load Switches SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load

More information

IP41. Enclosed Switchgear. Hinged Lid IP41 Enclosures. for technical support call: +44(0) General Description.

IP41. Enclosed Switchgear. Hinged Lid IP41 Enclosures. for technical support call: +44(0) General Description. General Description Supplied in hinged lid grey powder coated sheet steel enclosures, these IP41 sealed assemblies are eminently suitable for most indoor industrial applications. Supplied as Switch-Disconnectors

More information

Products and solutions for photovoltaic applications

Products and solutions for photovoltaic applications Products and solutions for photovoltaic applications Components for string and interface control panels Switch disconnectors Surge protection devices Fuse holders The range of LOVATO Electric components

More information

DPX moulded case circuit breakers

DPX moulded case circuit breakers BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.

More information

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution

More information

Protection and Connection Motorized and automatic transfer switches IEC Technical guide

Protection and Connection Motorized and automatic transfer switches IEC Technical guide Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety

More information

LV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity

LV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity LV switch-disconnectors Catalogue Merlin Gerin 40 to 2500 A We do more with electricity LV switch-disconnectors The various low-voltage applications 2 from 40 to 2500 A 4 Compact from 80 to 1250 A 5 Masterpact

More information

Breakers and Switches. Switches Switch-disconnectors OT and OTM

Breakers and Switches. Switches Switch-disconnectors OT and OTM Breakers and Switches Switches Switch-disconnectors OT and OTM Switch-disconnectors OT16...4000 and OTM40...2500 Features Product overview 4 High performance, compact solution 6 Technical data Switch-disconnectors,

More information

LOAD BREAK SWITCHES AND SWITCH FUSES

LOAD BREAK SWITCHES AND SWITCH FUSES easy to install LOAD BREAK SWITCHES AND SWITCH FUSES Sixty years of innovation in developing and producing high-quality switches When Mr Kauko Hyryläinen founded KATKO in 1941, one of his key targets

More information

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect

More information

Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE

Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe

More information

Just the right switch for your application

Just the right switch for your application Series 7 Motor Disconnect Switches up to 100A U508 approved device suitable as motor disconnect TIP! Sprecher + Schuh s 7 line incorporates the latest modular design techniques to provide maximum functionality

More information

DMX 3 -I 2500 switch disconnectors

DMX 3 -I 2500 switch disconnectors 8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40

More information

Safety enclosures Normal atmospheres steel enclosure from 50 to 1600 A

Safety enclosures Normal atmospheres steel enclosure from 50 to 1600 A Integrated products & solutions The solution for > Iron and steel industry > Cement plants > Paper mills > Sawmills > Hydraulic power packs > Automotive > Mining coff_436_a coff_434_a Strong points Function

More information

SENTRON Switching and Protection Devices Switch Disconnectors

SENTRON Switching and Protection Devices Switch Disconnectors SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP

More information

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1 MainswitchSurfacemounting Partno. T0-2-8900/I1/SVB Articleno. 207151 CatalogNo. CT02-8900-I1CRQ Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual

More information

SWITCH DISCONNECTORS PLANET -SWITCH.

SWITCH DISCONNECTORS PLANET -SWITCH. SWITCH DISCONNECTORS 6A to 600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 50A. PLANET -SWITCH SEC. PAGE

More information

Emergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0

Emergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0 MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches

More information

Switch-disconnectors OT , OETL 3150

Switch-disconnectors OT , OETL 3150 Switch-disconnectors OT 16...2500, OETL 3150 Contents 4 Product overview 6 Features 8 Technical data 18 Ordering information, manual operation 18 Front operated switch-disconnectors OT, OETL 24 Side operated

More information

Switch disconnectors

Switch disconnectors Selection Load break switch disconnectors type LK3, 40-120 A Selection guide for 3 and 4-pole switch disconnectors General The LK3 range of switch disconnectors (lth: 40 A to 120 A) is designed for use

More information

D509E. Manual Motor - Starters

D509E. Manual Motor - Starters D509E Manual Motor - Starters Index Page Manual Motors Starters 182 Auxilliary Contact Blocks 182 Trip Alarm Aux. Switch 182 Shunt Release 182 Under-voltage Release 183 Accessories 183 Busbar Connectors

More information

Switches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference

Switches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference Load Break Switches According to BS EN60947-3 High Thermal & Dynamic Strength Fully rated suitable for distribution & motor loads Auxiliary contacts also available Fully Visible Breaking Arduous categories

More information

and other modular devices for low voltage installation

and other modular devices for low voltage installation Technical catalogue System and other modular devices for low voltage installation 2CSC400002D0204 SUMMARY Introduction Miniature Circuit-Breakers Residual Current Devices Auxiliary elements and accessories

More information

Wall mounted switchgear

Wall mounted switchgear Contents Safepact 2... pages /2 to / Enclosed MCCBs 6 to 60A... page /2 Enclosed switch disconnectors 100 to 60A... page / Earth leakage.... page /4 Auxiliaries and accessories... page /5 Enclosed Interpact...page

More information

Switch Disconnectors

Switch Disconnectors Switch Disconnectors Reversible terminals allow the same switch body to be used in both front & rear mount applications 25A - 32A - 50A - 63A - 80A - A versions available Neutral pole, additional poles

More information

CATALOGUE. Solutions for Power, Control & Safety

CATALOGUE. Solutions for Power, Control & Safety CATALOGUE Solutions for Power, Control & Safety 2015 Contents An independent manufacturer... p.4 Four key applications: the benefit of a specialist... p. 5 A cutting-edge laboratory... p. 6 Socomec in

More information

TeSys GS. Data for Designers. Contents

TeSys GS. Data for Designers. Contents TeSys GS Technical Data for Designers Contents Characteristics: > switch-disconnector... B5/16 to B5/21 > auxiliary contacts...b5/22 Dimensions... B5/23 to B5/31 Schemes...B5/31 B5/15 Characteristics -

More information

Single foot switches - PX and PA series

Single foot switches - PX and PA series Single foot switches - PX and PA series Description The PX and PA foot switches are traditional products of Pizzato Elettrica that have recorded a continuous growth and success in the market. Modified

More information

Non-Fused Load Break Switches FSSC, SX, SXDC, SC

Non-Fused Load Break Switches FSSC, SX, SXDC, SC Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty

More information

SWITCH FUSES 3KL71 from 32A to 800A Description

SWITCH FUSES 3KL71 from 32A to 800A Description from 32A to 800A Description SWITCH FUSES 3KL71 3KL71 is a range of load-break switches suitable for making and breaking on load and disconnetting low voltage electrical circuits. They are commonly used

More information

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory

More information

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1

More information

SHORT FORM CATALOGUE. ATYS & SIRCOVER Transfer Switch Equipment for your power availability UL 1008 & UL 98

SHORT FORM CATALOGUE. ATYS & SIRCOVER Transfer Switch Equipment for your power availability UL 1008 & UL 98 2014 2015 SHORT FORM CATALOGUE ATYS & SIRCOVER Transfer Switch Equipment for your power availability UL 1008 & UL 98 ATyS UL 1008 Motorized Transfer Switching Equipment from 100 to 400 A Transfer switches

More information

SIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200A

SIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200A 2017 CTLOGUE extract SIRCOVER Manual transfer switching equipment for source changeover applications from 63 to 3200 Transfer switches svr_207_a.eps svr_208_a.eps The solution for > Manufacturing > Power

More information

LOAD BREAK SWITCHES A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES

LOAD BREAK SWITCHES A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES LOAD BREAK SWITCHES 16-250 A TECHNICAL DATA FOR KU, KUE, VKA AND EVA SERIES Load Break Switches Rated insulation voltage, U i (V) Rated thermal current, I th (A) Nominal values with cable size (mm 2 )

More information

UL 508 Non-Fusible Disconnect Switches

UL 508 Non-Fusible Disconnect Switches UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.

More information

Low Voltage Products. Switches Switch-disconnectors OT and OETL

Low Voltage Products. Switches Switch-disconnectors OT and OETL Low Voltage Products Switches Switch-disconnectors OT and OETL Switch-disconnector IEC lth /A le /AC22A, 415V le /AC23A, 415V... OT16F OT63F OT100F OT160E OT25F OT80F OT125F OT40F 25 32 40 63 80 115 125

More information

Thermal magnetic and trip-free switches

Thermal magnetic and trip-free switches 87045 LIMOGES Cedex Phone : 33 05 55 06 87 87 Fax : 33 05 55 06 88 88 DPX 3 1600 Reference(s : 422 250 /251/ 252/ 253/ 254/ 255 /256/ 262/263/ 264/ 265/ 266/ 267/268/ 269/ 270/ 271/ 272/ 273/ 278/ 287/

More information

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator

More information

Miniature Circuit Breaker

Miniature Circuit Breaker Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the

More information

Phelan. Electromec ELECTROMEC LOAD BREAK SWITCHES. APPROVALS For Canada and US APPLICATIONS DESIGN FEATURES

Phelan. Electromec ELECTROMEC LOAD BREAK SWITCHES. APPROVALS For Canada and US APPLICATIONS DESIGN FEATURES DESIGN FEATURES Double break contacts Polycarbonate shroud for wired terminal protection included Excellent switching & high short circuit capacity Compact and reliable Easy installation Front, rear and

More information

UL 508 Non-Fusible Disconnect Switches

UL 508 Non-Fusible Disconnect Switches UL 508 Non-Fused (M163 M803) The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect.

More information

SFS-UFS Single Foot Switches

SFS-UFS Single Foot Switches SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes

More information

Enclosed DC rated switch-disconnectors OTDCP from 16 to 32 Amperes

Enclosed DC rated switch-disconnectors OTDCP from 16 to 32 Amperes Protection and Connection Enclosed DC rated switchdisconnectors OTDCP from 16 to 32 Amperes Enclosed OTDC switches from 16 to 32 Amperes meet the demanding requirements of photovoltaic applications. Enclosed

More information

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI . Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,

More information

TeSys GS & DF Fuse protection

TeSys GS & DF Fuse protection TeSys GS & DF Fuse protection Simple and effective protection TeSys GS Fuse disconnect switches Total isolation between poles Safe replacement of the fuses (double breaking system) Frontal and right side

More information

COMO Non-fusible disconnect switches from 30 to 50 A

COMO Non-fusible disconnect switches from 30 to 50 A EDITION 2 CATALOGUE EXTRACT COMO Non-fusible disconnect switches COMO COMO_186_A The solution for > Industrial control systems Strong points COMO_185_A COMO > Easy mounting > Compact > Safety Conformity

More information

Technical Brochure. Switch Fuses DIN and NFC-Standard. Selection Table. Brochure OESA 2DIN GB Mallipohja. Low Voltage Products

Technical Brochure. Switch Fuses DIN and NFC-Standard. Selection Table. Brochure OESA 2DIN GB Mallipohja. Low Voltage Products Technical Brochure Switch Fuses DN and NFC-Standard Selection Table Brochure ESA 2DN GB 99-12 Mallipohja Powerline S switch fuses 20...160A, 690 V Unique patented design for the 21st century Total user

More information