BUSSMANN. CUBEFuse Compact Circuit Protector Base (CCPB) SERIES. Technical Data Effective April 2017 Supersedes April 2016
|
|
|
- Georgiana Hudson
- 6 years ago
- Views:
Transcription
1 Supersedes April 2016 BUSSMANN SERIES CUBEFuse Compact Circuit Protector Base (CCPB) 2011/65/EU Features and benefits: Uses finger-safe, current-limiting Class CF CUBEFuse with Class J performance available, time-delay or fast-acting versions from 1 to 100 amps* Patented ampacity rejection feature helps prevent overfusing High short-circuit current ratings Disconnect rated to provide means for load isolation All versions are full voltage rated at 600Vac 125Vdc rated for 80A and below UL 98 Listed and suitable for branch circuit disconnect 1-, 2- and 3-pole versions are horsepower rated Listed to UL and culus Open fuse indication light per pole Additional open fuse indication can be provided by using the time-delay indicating CUBEFuse version Built-in switch/fuse interlock prohibits fuse removal while energized Permanent lockout/tagout provisions Lock-On provision available when used in the Bussmann series Quik-Spec Coordination Panelboard (QSCP) Product description: The revolutionary Bussmann series Compact Circuit Protector Base (CCPB) with CUBEFuse is designed as a fused branch circuit disconnect switch for the Bussmann series Quik-Spec Coordination Panelboard. The CCPB with CUBEFuse simplifies selective coordination and lockout/tagout provisions allow for isolation of individual branch circuit loads for safe work practices. * See data sheet 9000 for time-delay CUBEFuse and data sheet 2147 for fast-acting CUBEFuse specifications.
2 CUBEFuse Compact Circuit Protector Base (CCPB) Specifications: Switch ampacity and rejection breaks 15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A and 100A Poles 1-, 2- and 3-pole versions Volts 600Vac (or less) 125Vdc (15, 20, 30, 40, 70 and 90 amp switches with 80A fuse) Agency information UL 98 Listed, File E302370, Guide WHTY culus to CSA Standard 22.2 No. 4, File E302370, Guide WHTY7 CE compliant RoHS compliant Terminals Lineside bolt-on bus connector and torque Bolt-mounted design into Quik-Spec Coordination Panelboard bus #10-32-UNC Hex flange Phillips screw; 25 Lb-In (2.8 N m) Loadside box lug terminal and torque 15-60A: 18 to 10 AWG (1 to 6mm 2 ) single or dual rated (same size wire), solid or stranded 75 C or higher - Cu only; 20 Lb-In (3.4 N m) 8 to 6 AWG (10 to 16mm 2 ) single or dual rated (same size wire), solid or stranded 75 C or higher - Cu only; 35 Lb-In (5.8 N m) 4 AWG (25mm 2 ) single 75 C or higher - Cu only; 35 Lb-In (5.8 N m) 100A: 18 to 10 AWG (1 to 6mm 2 ) single, solid or stranded 75 C or higher - Cu only; 25 Lb-In (2.82 N m) 8 to 1 AWG (10 to 45mm 2 ) single stranded 75 C or higher - Cu only; 40 Lb-In (4.52 N m) 6 AWG (16mm 2 ) dual stranded (same size wire) 75 C or higher Cu only; 45 Lb-In (5.08 N m) Loadside fork terminal Max. 30A suitable for use with #8-32UNC screw Lockout/tagout 4mm shank lock 1-Pole 2-Pole 3-pole CCPB-1-_CF CCPB-2-_CF CCPB-3-_CF Lineside bolt-on bus connector Switch ON and OFF symbols Lockout/tagout provision Switch handle Local open fuse indication light Local open fuse indication Light illumination requires closed circuit and minimum 90V operating voltage Shipping weight 2.03 lbs per carton Carton quantity 6 poles Environmental data Storage and operating temperature -20 C to 75 C** ** For fuse performance under or above 25 C, consult fuse performance derating charts. Loadside box lug terminal Loadside fork terminal CUBEFuse base 2
3 CUBEFuse Compact Circuit Protector Base (CCPB) Technical Data 1161 Effective April 201 Catalog numbers: Accepts CUBEFuse amp range Typical installed fuse amp range Max. fuse amps CCPB part numbers Poles Voltage rating Time-delay non-indicating Time-delay indicating* Fast-acting non-indicating** SCCR Hp ratings (Vac) CCPB-1-15CF 1 600Vac, TCF1RN, FCF1RN, 0.5Hp@120V 125Vdc TCF3RN, TCF6, FCF3RN, CCPB-2-15CF 2 1 to 15 TCF6RN, TCF10, FCF6RN, 15A 1.5Hp@240V TCF10RN, TCF15 FCF10RN, 100kA 3Hp@240V CCPB-3-15CF 3 600Vac TCF15RN FCF15RN DC 5Hp@480V 7.5Hp@600V CCPB-1-20CF 1 600Vac, 0.75Hp@120V CCPB-2-20CF 2 125Vdc 1 to 20 TCF17-1/2RN, TCF20RN TCF17-1/2, TCF20 FCF20RN 20A 2Hp@240V 100kA CCPB-3-20CF 3 600Vac DC 3Hp@240V 7.5Hp@480V CCPB-1-30CF 1 600Vac, 1.5Hp@120V CCPB-2-30CF 2 125Vdc 1 to 30 TCF25RN, TCF25, FCF25RN, TCF30RN TCF30 FCF30RN 30A 3Hp@240V 100kA 5Hp@240V CCPB-3-30CF 3 600Vac DC 15Hp@480V CCPB-1-40CF 1 600Vac, 2.0Hp@120V CCPB-2-40CF 2 125Vdc 3Hp@240V 1 to 40 TCF35RN, TCF35, FCF35RN, TCF40RN TCF40 FCF40RN 40A 100kA 7.5Hp@240V CCPB-3-40CF 3 600Vac DC 20Hp@480V CCPB-1-50CF 1 600Vac, 3.0Hp@120V CCPB-2-50CF 2 125Vdc 1 to 50 TCF45RN, TCF45, FCF45RN, TCF50RN TCF50 FCF50RN 50A 5Hp@240V 100kA 7.5Hp@240V CCPB-3-50CF 3 600Vac DC 20Hp@480V CCPB-1-60CF 1 600Vac, 3.0Hp@120V CCPB-2-60CF 2 125Vdc 1 to 60 TCF60RN TCF60 FCF60RN 60A 7.5Hp@240V 100kA 7.5Hp@240V CCPB-3-60CF 3 600Vac DC 20Hp@480V CCPB-1-70CF 1 600Vac, 3.0Hp@120V CCPB-2-70CF 2 125Vdc 1 to 70 TCF70RN TCF70 FCF70RN 70A 7.5Hp@240V 100kA 15Hp@240V CCPB-3-70CF 3 600Vac DC 30Hp@480V 40Hp@600V CCPB-1-90CF 1 600Vac, 5.0Hp@120V CCPB-2-90CF 2 125Vdc 1 to 90 TCF90RN TCF90 FCF80RN, FCF90RN 90A 10Hp@240V 100kA 20Hp@240V CCPB-3-90CF 3 600Vac DC 50Hp@480V 40Hp@600V CCPB-1-100CF 1 600Vac, 5.0Hp@120V CCPB-2-100CF 2 125Vdc 1 to 100 TCF100RN TCF100 FCF100RN 100A 10Hp@240V 20Hp@240V CCPB-3-100CF 3 600Vac 50Hp@480V 40Hp@600V * 1A and 3A indicating CUBEFuse not available. Correct fit with CCPB disconnect requires indicating CUBEFuse with date code R38 or later. ** Do not use UPS/Critical Application fast-acting FCF with motors. Any fuse with an amp rating less than or equal to the max fuse rating may be used. E.g., TCF15 may be used with CCPB-1-20CF. Indiacting or non-indicating time-delay CUBEFuse only. 125Vdc only applies up to 80A. 3
4 CUBEFuse Compact Circuit Protector Base (CCPB) Dimensions in (mm): 15-60A 1.0 (25.4) 3.9 (99.4) 3.0 (75.8) 2.0 (50.7) 2.7 (69.1) 2.9 (73.5) Ø.2 (5.08) 0.5 (12.9) A 1.0 (25.4) 5.3 (133.3) 3.0 (75.8) 2.0 (50.7) 2.7 (69.6) 3.4 (86.0) Ø0.2 (5.08) 0.03 (0.84) 0.54 (13 72) For details on the CCPB and its use in the Quik-Spec Coordination Panelboard, see data sheet
5 CUBEFuse Compact Circuit Protector Base (CCPB) Technical Data 1161 Effective April 201 sizing table: Low-Peak TCF_ and TCT_RN time-delay Class CF fuses Voltage 115Vac, 1-Phase 230Vac,1-Phase 200Vac, 3-Phase 208Vac, 3-Phase size (Hp) FLA Optimal protection Code max Heavy start N/A 5** N/A N/A N/A 10** N/A ** N/A N/A ** N/A N/A size (Hp) FLA Optimal protection Code max Heavy start Voltage Vac, 3-Phase ** N/A Vac, 3-Phase ** N/A N/A Vac, 3-Phase ** Note: Use Code Max column for low to moderate reverse/jog/plug applications. Heavy Start permitted only if Code Max does not allow motor start-up. * Based on motor FLA from NEC tables and
6 CUBEFuse Compact Circuit Protector Base (CCPB) The only controlled copy of this Data Sheet is the electronic read-only version located on the Eaton Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard Cleveland, OH Eaton.com Bussmann Division 114 Old State Road Ellisville, MO United States 2017 Eaton All Rights Reserved Printed in USA Publication No BU-SB15190 April 2017 Eaton, Bussmann, Quik-Spec and CUBEfuse are valuable trademarks of Eaton in the U.S. and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. CSA is a registered trademark of the Canadian Standards Group. NEC is a registered trademark of the National Fire Protection Association, Inc. NEMA is a registered trademark of the National Electrical Manufacturers Association. UL is a registered trademark of the Underwriters Laboratories, Inc. Follow us on social media to get the latest product and support information.
Compact Circuit Protector (CCP)
Supersedes March 2016 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail 2011/65/EU Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description
Compact Circuit Protector (CCP) 1-, 2- and 3-pole Class CC, Midget, 10x38mm
Supersedes October 2015 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description and
Compact Circuit Protector
Technical Data 10801 Supersedes August 018 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP) Contents Page 011/65/EU and specifications.... -3 Catalog numbers.... 4 Conductor information and available
Effective December 2015 Supersedes September 2013
Technical data 1156 Supersedes September 2013 BUSSMANN SERIES CUBEFuse safety switch Standard features: Product description: Bussmann series heavy duty 600Vac safety switch with the finger-safe CUBEFuses
Compact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
Compact Circuit Protector (CCP)
Supersedes April 2014 UL Class CC, CF (CUBEFuse ), Midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-Pole Class CC, Midget, 10x38mm Description & Specifications....
Bussmann series Quik-Spec Power Module Switch elevator disconnect
Supersedes January 2016 Agency information UL 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262 culus, NEMA 1, UL 50, Listed enclosure cul per Canadian Standards C22.2, No. 0-M91-CAN/
Compact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
Compact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
CUBEFuse. CUBEFuse catalog numbers (amps)
The power of space CUBEFuse The revolutionary Bussmann TM series Low-Peak TM CUBEFuse TM delivers the smallest footprint compared to any Class CC, J or RK fuse solution requiring up to 70% less space when
Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
BUSSMANN. Next generation Compact Circuit Protector (cat. no. CCP2) SERIES. For use with Class CC, Supplemental and IEC 10x38 mm fuses
Technical Data 10789 BUSSMANN SERIES Next generation Compact Circuit Protector (cat. no. CCP2) Contents Page 2011/65/EU CCP2 switch and specifications.... 2-3 Catalog numbers.... 4 Conductor information
Fusetron FRN-R Class RK5 250Vac/125Vdc A, dual element, time-delay fuses
Technical Data1019 Supersedes July 2013 Fusetron FRN-R Class RK5 250Vac/125Vdc Catalog symbols: FRN-R-_ (non-indicating) FRN-R-_ID (indicating) Description: Eaton Bussmann series advanced protection, energy
Low-Peak LPJ Class J 600Vac/300Vdc, 1-60A, dual element, time-delay fuses
Technical Data 6 Supersedes August 2015 Low-Peak LPJ Class J 600Vac/Vdc, 1-60A, Catalog symbol: LPJ-(amp)SP (non-indicating) LPJ-(amp)SPI (indicating) Description: Bussmann series Ultimate protection LPJ
Electric vehicle auxiliary fuses 500 Vdc, A
Supersedes February 2017 BUSSMANN SERIES 500 Vdc, 20-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a TS16949 quality system for compliance with automotive requirements RoHS
UL Recognized power distribution blocks
Susedes September 2016 example: 16220-3 is a 3-16220 Where: The prefix 16220 defines the block s lineside characteristics (i.e., one conductor that accepts 2/0 - #14 Cu, or 2/0 - #8 Al conductors) and
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR400 400A 250V TD Class RK5 Dual Elem Fuse-Fusetron Catalog Number Manufacturer Description Weight per unit Product
BH-1 modular fuse blocks, 700 V, 400 A
Supersedes December 1998 Agency information UL Recognized, Guide IZLT2, File E14853 up to 700 V CSA Certified, Class 6225-01, File 47235 up to 700 V CE RoHS compliant Materials Base - light-weight, high
BUSSMANN. LIMITRON FNQ-R Class CC 600Vac, A, time-delay fuses SERIES. Technical Data Carton quantity: Catalog symbol: Dimensions - in:
Supersedes January 204 BUSSMANN SERIES LIMITRON FNQ-R Class CC 600Vac, 4-30A, time-delay fuses Catalog numbers (amps) FNQ-R- 4 FNQ-R--3 FNQ-R-3-2 FNQ-R-8 FNQ-R-3 FNQ-R--4 FNQ-R-3-2 FNQ-R-9 FNQ-R-4 FNQ-R--
CHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes August 2016 BUSSMANN SERIES Specifications: 2011/65/EU Volts 600 V (or less) UL 690 V (or less) IEC 1000 Vdc (or less) photovoltaic (PV) Amps 30 A UL 32 A IEC Short-Circuit Current Rating (SCCR)
6.3 mm reverse quick connect
BUSSMANN SERIES Pre-production and sample electric vehicle auxiliary fuses 500 Vdc, 5-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a IATF 16949 quality system for compliance
footprint of traditional fusible switches
Disconnect switches Contents Section page Description Compact Circuit Protector (CCP) disconnect switches Class CC, UL supplemental and IEC 0x38mm (CCP) -3 Class CF CUBEFuse (CCP-CF) 4-5 Compact Circuit
Specification made simple for selective coordination in a compact size
Quik-Spec family of circuit protection solutions BUSSMANN Specification made simple for selective coordination in a compact size SERIES The Quik-Spec Coordination Panelboard (QSCP) simplifies selective
Class R 250V and 600V modular ferrule and knifeblade fuse blocks
Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole
LKN A 250V Super-Lag Fuse Link. Features amperage rating 200 class Voltage Rating 250. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com LKN200 200A 250V Super-Lag Fuse Link Bussmann Fuses Number Manufacturer Description per
Compact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
CHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes Janaury 2016 BUSSMANN SERIES Specifications: Volts 600V (or less) UL 690V (or less) IEC 1000Vdc (or less) photovoltaic (PV) Amps 30A UL 32A IEC Short-Circuit Current Rating (SCCR) 33kA photovoltaic
Quik-Spec Coordination Panelboard A fusible panelboards
Supersedes July 2018 Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications... 2-3 Enclosure types and voltages/systems.... 4 using, main and feed-through
BUSSMANN. Pre-production and sample electric vehicle power fuses 500 Vdc, A SERIES. Technical Data Effective December 2018.
BUSSMANN SERIES Pre-production and sample electric vehicle power fuses 500 Vdc, 50-400 A 2011/65/EU Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a IATF 16949 quality system for
Class J modular ferrule and knifeblade fuse blocks
Technical Data10488 SupersedesFebruary 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with
Section Contents. Disconnect Switches
Section Contents Page Compact Circuit Protector (CCP) fused disconnect switches....................326-329 Fused, dead front disconnect switches...........329 Fusible Disconnect Switch Overview............330
Bussmann series Quik-Spec Coordination Panelboard
Quik-Spec electrical gear 12 Contents Bussmann series Quik-Spec Coordination Panelboard Section page Description Quik-Spec Coordination Panelboards Up to 400 A 2 600 to 1200 A 3 Quik-Spec elevator disconnects
Quik-Spec Coordination Panelboard A fusible panelboards
USSMNN Supersedes December 2015 SERIES Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications.... 2-3 Enclosure types and voltages/systems.... 4 using, main
Low-Peak 600V Class RK1
LPS-RK 600Vac/300Vdc, 1 10-60A, Dual Element, Time-Delay Fuses Dimensions - in 5" (± 0.31) 5.5" (± 0.31) Available with easyid open fuse indication 1/10 to 30A 0.81" (±0.008) 35 to 60A 1.06" (±0.008) Description:
up to 30A limited by conductor size Operating and storage temperature:
Technical Data 7 USSMNN Effective pril 07 Supersedes December 05 SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Use these part numbers to order insulating
Now - Up To 400A Mains!
Quik-Spec Family Specification has never been easier or faster for the distribution products you need to achieve selective coordination, and improve electrical system safety and performance Quik-Spec Coordination
Quik-Spec Electrical Gear
Section Contents Page Quik-Spec Coordination Panel Boards......... 266-267 Quik-Spec Power Module Switches and Panels.. 268-269 Quik-Spec DC Safety Switches.................. 270 Quik-Spec AC Safety Switches..................
Bussmann 10x38mm Photovoltaic fuses 1000Vdc, 1-30A
Technical Data Effective March 0 Bussmann x38mm Photovoltaic fuses Operating class gpv and UL PV fuse links PV Fuse coordination With thin film cells and, 5 and crystalline silicon cells Description A
Quik-Spec Coordination Panelboard Specifications
Quik-Spec Coordination Panelboard Specifications 30A - 400A Fusible Panelboards SECTION 26 24 XX (This Specification references CSI MasterFormat 2004) FUSIBLE BRANCH CIRCUIT PANELBOARDS PART 1 1.01 SUMMARY
LPSRK30SP 30A 600V TD Dual Elem Class RK1 Low Peak Fuse
LPSRK30SP 30A 600V TD Dual Elem Class RK Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK30SP 30A 600V Class RK Low Peak Dual Element, Time Delay Fuse 600 (lbs/each)
LPSRK100SP 100A 600V TD Dual Elem Class RK1 Low Peak Fuse
LPSRK100SP 600V TD Dual Elem Class RK1 Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK100SP 600V Class RK1 Low Peak Dual Element, Time Delay Fuse 0.4100 (lbs/each)
Volts: 600V Amps: up to 30A limited by conductor size Withstand: 200kA RMS Sym. Operating and storage temperature:
Technical Data 7 Effective December 05 Supersedes October 05 USSMNN SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Symbol: HE* Description: The ussmann series
N0N A 250V One-Time Class H Fuse
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 AllenWatson@elliottelectric.com N0N 250V One-Time Class H Fuse Catalog Number Manufacturer Description Weight per unit
Selection and application guide
Selection and application guide 30A 400A fusible panelboards Coordination Panelboard www.usa.siemens.com/fusiblepanel Coordination panelboards Table of contents Subject Page Specifications 2-3 Enclosure
LPCC3 3A 600V TD Class CC Low Peak Fuse. Features amperage rating. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 LPCC3 3A 600V TD Class CC Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPCC3
Bussmann Open and Enclosed Rotary Disconnect Switches. Exceptional Breadth and Availability for Your Application
Bussmann Open and Enclosed Rotary Disconnect Switches Exceptional Breadth and Availability f Your Application 2 Visit us on the web at www.cooperbussmann.com/disconnects Table of Contents Compact Circuit
Quik-Spec. Section Contents
Section Contents Page Quik-Spec Coordination Panel Boards......... 238-239 Quik-Spec Power Module Switches and Panels.. 240-241 Quik-Spec DC Safety Switches.................. 242 Quik-Spec Solar Combiner
Quik-Spec Coordination Panelboard
Read and retain for future reference Quik-Spec Coordination Panelboard Instruction Leaflet 3A1071 RevD Section TABLE OF CONTENTS Page Danger and warnings for installation of the equipment.............3-4
Fast-acting supplemental fuse. For superior protection, Bussmann recommends upgrading to Low-Peak Class CC fuses. See data sheet # 1023.
Technical Data 2020 Effective April 204 Supersedes April 200 KLM Series 3 32 x - 2 600Vac/dc Fast-acting supplemental fuses 600Vac/dc to 30A Description Fast-acting supplemental fuse. For superior protection,
The easiest and fastest way to select and specify the right control circuit fuse
Fuses Made Simple TM - Control Circuits BUSSMANN SERIES The easiest and fastest way to select and specify the right control circuit fuse Fuses Made Simple TM - Control Circuits Eaton's Bussmann series
Low voltage, branch circuit fuses
Low voltage, branch circuit fuses Contents Description Page Fuse holder and block selection guide -2 Class fuse dimensions -5 Fuses by fuse class Class Fuses Volts CC....... LP-CC............... 600V.....
Assembly not available for new installations.
Catalog Symbol: EP Voltage Ratings: 120/208V, 120/240V, 277/480V Main Device Type: MLO (200A), Main Circuit Breaker (up to 200A) Enclosure: NEMA 1 Trim: Surface Mount Agency Information: UL 67, UL 50 The
PT Medium voltage fuses for potential and small power transformers
Technical Data 6002 BUSSMANN Supersedes December 2017 SERIES PT Medium voltage fuses for potential and Description: Bussmann series Indicating and nonindicating E-Rated, current-limiting, medium voltage
Compact Circuit Protector (CCP) Application Note
Compact Circuit Protector (CCP) Application Note Table Of Contents Application Note Description Page Objective............................................... 3 Compact Circuit Protector (CCP).............................
XL Style Photovoltaic Fuse Links for Solar Panel Applications 50 to 630A, 1000 & 1500Vdc PV Series
Description: A range of XL package fuse links specifically designed for protecting and isolating photovoltaic array combiners and disconnects. These fuse links are capable of interrupting low overcurrents
LOW-PEAK Time-Delay Fuses KRP-C Class L 600 Volt A
Bussmann LOW-PEAK Time-Delay Fuses KRP-C Class L 600 Volt 601-2000A Dimensional Data All other lerances (± 0.02) 0.63" (± 0.03) All Slots and Holes 10.75" (± 0.09) 8.63" (± 0.09) 6.75" 5.75" 601A 800A
The easiest and fastest way to select and specify the right fuse
Fuses Made Simple BUSSMANN SERIES The easiest and fastest way to select and specify the right fuse Fuse selection made simple Fuses Made Simple with Bussmann series fuses Three tiers of protection help
Quik-Spec Coordination Panelboard
Quik-Spec Application Notes Contents Section Page Introduction...................................... Feature/Benefits.................................. Panelboard Overview.............................-
Low Voltage, Branch Circuit Rated Fuses
Low Voltage, Branch Circuit Rated Page Fuse Holder & Block Selection Guide 8-20 Class Fuse Dimensions 2-22 By Fuse Class Class Volts Low Voltage Branch Circuit CC...... LP-CC............... 600V..... 23
NH DIN Dual Indication Fuse Links Class am, 690Vac, 6 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class am square bodied industrial fuse links for a wide variety of motor protection applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhm(size)b-690 am
CCP2-FLR1-21_ flange-rod operating mechanism
Installation manual 3A3747 Rev A Contents Description Page General information 1 Required tools 2 Hardware contents 2 Installation and adjustment 2-6 Flange drilling pattern 7 HAZARD OF ELECTRIC SHOCK,
Complete and reliable solar circuit protection
Contents Photovoltaic fuses, holders, and blocks 6 Complete and reliable solar circuit protection Description Fuses Fuse size Volts Amps PVM 13/32" x 1-1/2" 600 4-30 PVS-R RK5 600 20-400 Section page PV-_A10_
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
Products for enhancing electrical safety and reliability
Circuit protection solutions BUSSMANN Products for enhancing electrical safety and reliability SERIES Advantages of Bussmann series fused circuit protection Bussmann series fuses are worry-free: High interrupting
5 x 20mm Fuses S500 Series, Fast-Acting, Glass Tube
5 x 20mm Fuses S500 Series, Fast-Acting, Glass Tube Fast-acting, low breaking capacity Optional axial leads available 5 x 20mm physical size Glass tube with silver-plated (32-125mA) and nickel-plated (160mA-10A)
BUSSMANN. 8.3kV E-Rated SERIES. Medium voltage fuses for feeder circuit, switchgear and transformer. protection. Technical Data 10352
8.3kV E-Rated Description: E-Rated, current-limiting, medium voltage fuses for feeder circuit, switchgear and transformer protection. Supersedes pril 2015 USSMNN SERIES Medium voltage fuses for feeder
Volume 4C: Circuit Protection Bussmann series solutions
Volume 4C: Circuit Protection Bussmann series solutions Don't miss a sale or an opportunity to upgrade your fuse protection Three tiers offer distinct levels of circuit protection 1. Ultimate - Unique
Class gg/gl, 690Vac, 2 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class gg/gl square bodied industrial fuse links for a variety of applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhg(size)b-690 gg/gl Fuse Size: 000 to
Electrical safety and reliability: Selective coordination. Protect with selective coordination
Electrical safety and reliability: Selective coordination Protect with selective coordination Safe, reliable and cost-effective power distribution Commercial, healthcare and industrial facilities require
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
CC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
Circuit protection for telecom applications
Telecom protection products 14 Contents Circuit protection for telecom applications Description Poles Volts DC Fused pullout disconnects and related fuses Amps Section page Compact TPCDS with TCP fuses
Arrow Hart industrial grade power lock plugs, connectors and receptacles
Arrow Hart industrial grade power lock plugs, connectors and s Description 2-pole, 3-wire grounding 3-pole, 3-wire non-grounding 3-pole, 4-wire grounding 20A, 125V/AC; 20A, 250V/DC; 30A, 480V/AC; 30A,
6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
Industry s most comprehensive medium voltage circuit protection
Medium voltage fuses BUSSMANN SERIES Industry s most comprehensive medium voltage circuit protection We have your solution For over 100 years, Bussmann TM series fuses have provided superior circuit protection,
A case study in solving SCCR issues
White Paper 10601 Effective September 2016 A case study in solving SCCR issues By: Joe Graveline, Sr. application engineer, Eaton, Bussmann Division, and Erik Barnes, marketing manager, Eaton, Bussmann
Application note Compact Circuit Protector (CCP2) Smaller, better... the Power of Space
Smaller, better... the Power of Space Table of contents Description Page Introduction, features and benefits 3 Product and accessory overview 4-5 General disconnect and overcurrent protection considerations
S505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses
Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances
S505SC 5 x 20 mm Time-delay, axial lead ceramic tube fuses
Supersedes September 2013 5 x 20 mm Time-delay, axial lead ceramic tube fuses Pb Product description Time-delay, high breaking capacity Designed to IEC 60127-2 Nickel-plated brass end cap construction
R-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
Industrial grade L15-30 locking devices
Technical Data Industrial grade L15-30 locking devices Description AHL1530P AHL1530R AHL1530C AHL1530FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust
SW Tog DP 30A 120/277V Autogrd B&S WH
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3032W SW Toggle DP 30A 120/277V Autogrd B&S WH Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
Low-Peak fuses offer the industry s most advanced circuit protection
Low voltage, branch circuit fuses ussmann series Low-Peak fuses offer the industry s most advanced circuit protection Section page Description Fuse holder and block selection guide 2 Fuse reducers ranch
Industrial grade L6-30 locking devices
Technical Data Industrial grade L6-30 locking devices Description AHL630P AHL630R AHL630C AHL630FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust and
Bussmann series NH photovoltaic fuse links
Technical Data 72033 Supersedes April 204 Bussmann series NH photovoltaic fuse links BUSSMANN SERIES Product description Eaton s Bussmann series NH size photovoltaic fuse links are specifically designed
Red Spot Fuse Holders
Finger-safe Fuse Holders for BS88 HRC Industrial Fuses Description A range of CSA certified IP20 finger-safe fuse holders for BS88 HRC industrial fuses in rating up to 400A. Catalog Symbol RS(AMP)(Connection
Harmonization of IEC and North American Safety Standards
Equipment SCCR made easy Harmonization of IEC and North American Safety Standards Dan Neeser Field Application Engineer Eaton s Bussmann Division DanRNeeser@Eaton.com Agenda UL 508C, UL 61800-5-1 and transition
Fused Coordination Panelboard
Fused Coordination Panelboard SOLUTIONS GUIDE SOLUTIONS GUIDE Branch Circuit Protection Introducing Mersen s Fused Coordination Panelboard Selective Coordination is required in several locations as defined
R-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes ecember 2015 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
Industrial grade L14-30 locking devices
Description AHL1430P AHL1430R AHL1430C AHL1430FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust and debris Back wire terminal clamps for easy secure wiring
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
BSPA Type 1 and Type 2 surge protective devices
Installation manual 10679 Contents Description Page 1. Introduction 1.1 Manual introduction This installation manual describes the installation and operation of the Bussmann series BSPA surge protective
Premium industrial grade isolated ground straight blade receptacles
Technical Data Description 2-Pole, 3-Wire Grounding 15A 125V; 15A 250V 20A 125V; 20A 250V NEMA 5-15, 5-20, 6-15, 6-20 IG5261 AHIG5362 Design features Exclusive screw terminal guards provide fast, easy
Fuseology. Dual-Element, Time-Delay Fuse Operation
Dual-Element, Time-Delay Fuse Operation There are many advantages to using these fuses. Unlike single-element fuses, the Cooper Bussmann dual-element, time-delay fuses can be sized closer to provide both
overvoltage solutions
Introduction Contents Innovative overcurrent and overvoltage solutions Fuses Fusible accessories and gear Description Catalog section Selecting fused circuit protection Introduction Low voltage branch
Load Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
20A-125V DPLX RCPT. Features amperage rating 20. Material, Color, and Finish. Dimensions and Weight. Long Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 6352WBU 20A-125V DPLX RCPT Eaton Wiring Devices Catalog Number Manufacturer Description Weight per unit Product Category
Solar circuit protection application guide. Complete and reliable solar circuit protection
Solar circuit protection application guide Complete and reliable solar circuit protection Introduction Benefits of Eaton s circuit protection solutions Complete and reliable circuit protection for photovoltaic
C310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,