Product index. 4 - Manual motor protectors. Phone: Fax: Web: -

Transcription

1 Product index Features and benefits...1 General information Suitable applications Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS Type MS Type MS50 /MS Type MS95 / MS Accessories...10, Actuation tables...11 Connection diagrams...17 General accessory mounting layout...18 Technical data Approximate dimensions Phone: Fax: Web: info@clrwtr.com

2 Types MS116, MS132, MS5x, MS9x are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/OFF control, and protection against short circuit, overload, and phase loss conditions. protection saves cost, panel space, and ensures quick and reliable short-circuit protection by reacting within milliseconds. Close coupling adaptors are available for combination with ABB contactors in various applications. Type MS116 suitable for use with single and three phase motors up to 25 hp Suitable as motor disconnect in single motor applications and group motor installations as outlined in NEC Article 30.53(C) 15 thermal setting ranges from 0.16 to 32 Amperes, overload Class 10A Phase loss sensitivity per IEC/EN Short circuit current ratings up to 30 Motor controllers, manual (NLRV, NLRV7), UL file E Protectors Type MS132 suitable for use with single and three phase motors up to 25 hp Suitable as motor disconnect in single motor applications and group motor installations as outlined in NEC Article 30.53(C) Suitable for Tap conductor protection as outlined in NEC Article 30.53(D)(3) Suitable as self-protected combination motor controllers Types E and F as outlined in UL 508 and UL A 15 thermal setting ranges from 0.16 to 32 Amperes, overload Class 10 Phase loss sensitivity per IEC/EN Short circuit current ratings up to 65 Motor controllers, manual (NLRV, NLRV7), UL file E Combination motor controllers (NKJH, NKJH7), UL file E35003 Type MS5x suitable for use with single and three phase motors up to 50 hp Suitable as motor disconnect in single motor applications and group motor installations as outlined in NEC Article 30.53(C) Suitable as self-protected combination motor controller Type E as outlined in UL 508 and UL A Phase loss sensitivity per IEC/EN thermal setting ranges from 28 to 50 Amperes, overload Classes 10 and 20 Short circuit current ratings up to 65 Motor controllers, manual (NLRV), UL file E Combination motor controllers (NKJH, NKJH7), UL file E Type MS9x suitable for use with single and three phase motors up to 100 hp Suitable as motor disconnect in single motor applications and group motor installations as outlined in NEC Article 30.53(C) Suitable as self-protected combination motor controller Types E as outlined in UL 508 and UL A Phase loss sensitivity per IEC/EN thermal setting ranges from 28 to 100 Amperes, overload Classes 10 and 20 Short circuit current ratings up to 65 Motor controllers, manual (NLRV), UL file E Combination motor controllers (NKJH, NKJH7), UL file E Phone: Fax: Web: info@clrwtr.com

3 General information Suitable applications Devices suitable for these applications protector type Application MS116 MS132 MS5x MS9x Motor disconnect Group motor installation Tap conductor protection Phone: Fax: Web: info@clrwtr.com

4 General information Suitable applications Combination motor controllers Types E & F Combination motor controllers, as outlined in UL 508 Section 76, are a manufacturer s tested combination of either individual discrete components or a single controller. Fulfilling all the necessary components for a motor branch circuit, combination motor controllers provide a disconnecting and load switching means, as well as overload and short-circuit protection. These devices offer additional flexibility when selecting components for motor control and protection. Combination motor controllers can also utilize busbar for self-protected, multiple motor installations. Busbar must be selected and sized in accordance with the full-load current rating of the feeder circuit protective device. Definitions Type E Combination Motor Controllers are comprised of a UL 508 Disconnect, Branch Circuit Protector Device, Motor Controller and Motor Overload typically included in a single Self-protected Control Device (manual motor protector). Following a shortcircuit fault, Type E Combination Motor Controllers are tested to operate for 6,000 electrical cycles, plus an additional,000 mechanical cycles, as outlined in UL 508 Table Type F Combination Motor Controllers are comprised of a UL 508 Disconnect, Branch Circuit Protector Device, and Motor Overload typically included in a single Manual Self-protected Combination Controller with additional Magnetic or Solid State Motor Controller utilized for remote operation (manual motor protector + contactor). The operational requirements following a short-circuit fault differ for the manual motor protector and contactor. Devices suitable for these applications Combination motor controller protector type MS116 MS132 + S1-M3-xx MS5x-xxE MS9x-xxE Self-protected, Type E Self-protected,Type F Phone: Fax: Web: info@clrwtr.com

5 Horsepower to full-load Amperes for AC induction motors Horsepower (hp) Single phase Full Load Amperes (FLA) v ac 200 v ac 208 v ac v ac v ac 0 80 v ac v ac Three phase Single phase Three phase Single phase Three phase Single phase 1/ / / / / / / / / Three phase Single phase Full-load motor-running currents in Amperes corresponding to various AC horsepower ratings as published in Table 50.1 of UL 508. Three phase Single phase Three phase Single phase Three phase Phone: Fax: Web: info@clrwtr.com

6 General information Pilot duty ratings and overload trip classes Pilot duty ratings for AC control circuit contacts Contact rating designation Continuous thermal, test current (A) Maximum current, 50/60 Hz (A) 120 v ac 20 v ac 80 v ac 600 v ac Volt-amperes Make Break Make Break Make Break Make Break Make Break A A A B B B C C C D D E Mechanical switching ratings and test values as published in Table 1--1 of NEMA ICS (R2005, R2010) Pilot duty ratings for DC control circuit contacts Contact rating designation Continuous thermal, test current (A) Maximum current, 50/60 Hz (A) 120 v dc 250 v dc 301 to 600 v dc Volt-amperes Make / Break Make / Break Make / Break Make / Break N N N P P P Q Q Q R R Mechanical switching ratings and test values as published in Table 1--1 of NEMA ICS (R2005, R2010) Overload trip classes Trip class Tripping time T p (seconds) 10A 2 < T p < T p < T p < T p 30 Trip classes as published in Table 2 of UL A. Pilot duty rating explanation A Max. thermal current Max. voltage Phone: Fax: Web: info@clrwtr.com

7 Suitable applications: Single motor, suitable as motor disconnect Group motor installation MS116 Electrical ratings 1 Thermal setting range (A) Trip class Rated operational current I e (A) Frame Sz. 1 Frame Sz. 2 MS MS MS MS Rated instantaneous short-circuit current setting I i (A) Single phase 2 AC Motor ratings, breaking all lines, 50/60 Hz (hp) Three phase 120V 20V 20V 80V 600V A MS A Horsepower not applicable; use upper limit of the device thermal setting range for rated MS full-load A current in Amperes MS A MS A /2 MS A /10 3/ 3/ MS A /6 1/ MS A /8 1/ MS A / 1/ MS A / MS A / MS A MS A MS A MS A MS Catalog number MS116 Short circuit current ratings () Catalog number Max. fuse size (A) Fuse class UL Motor controllers, manual (NLRV) Circuit breaker Motor disconnect 3 20V 80V 600V Group motor installation 20V 80V MS MS MS MS MS MS MS MS J No rating MS MS MS MS MS MS MS V 80Y / 277V Self-protected Type E UL Combination motor controllers (NKJH) 600Y / 37V 80Y / 277V Use Type MS132 Self-protected Type F 600Y / 37V Type F contactors 1 Always size manual motor based on the full-load current of the motor. 2 For single phase connection diagram see page Suitable as motor disconnect only when provide with padlock adaptor SA1 or SA3; see accessories section. Phone: Fax: Web: info@clrwtr.com

8 Type MS132 For applications up to 32A MS Series Suitable applications: Single motor, suitable as motor disconnect Group motor installation Tap conductor protection Combination motor controllers - Type E - Type F MS132 Electrical ratings 1 Thermal setting range (A) Trip class Rated operational current I e (A) Frame Sz. 1 Frame Sz. 2 MS MS MS MS Rated instantaneous short-circuit current setting I i (A) AC Motor ratings, breaking all lines, 50/60 Hz (hp) Single phase 2 Three phase 120V 20V 20V 80V 600V A MS Horsepower not applicable; use upper limit of the device thermal setting range for rated MS full-load current in Amperes MS MS /2 MS /10 3/ 3/ MS /6 1/ MS /8 1/ MS / 1/ MS / MS / MS MS MS MS MS Catalog number MS132 Short circuit current ratings () 3 Catalog number Max. fuse size (A) Fuse class UL Motor controllers, manual (NLRV) Circuit breaker Motor disconnect Group motor installation 20V 80V 600V 20V 80V Self-protected Type E 5 UL Combination motor controllers (NKJH) Self-protected Type F 5 600V 80Y / 277V 600Y / 37V 80Y / 277V 600Y / 37V MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS MCCB, AF26 AF38 MS Size per NEC 6 Any fuse class size per NEC AF26 AF38 MS [35] AF26 AF38 MS [35] AF26 AF38 MS [35] 18 [35] AF26 AF38 MS [35] 18 [35] AF26 AF38 MS [35] 18 [35] AF26 AF38 MS [35] 18 [35] AF26 AF38 MS [35] 18 [35] AF26 AF38 Type F contactors 1 Always size manual motor based on the full-load current of the motor. 2 For single phase connection diagram see page For higher ratings using S803W current limiters see accessories section. Also suitable for tap conductor protection. Group ratings increased to [x] using Class RK5 fuses. 5 Requires the use of line-side feeder terminal S1-M3-xx: see accessories section. 6 NEC refers to the National Electric Code. 7 MCCB interrupting rating must be equal to or greater than the rating of the device. Phone: Fax: Web: info@clrwtr.com

9 Suitable applications: Single motor, suitable as motor disconnect Group motor installation Combination motor controller - Type E MS50 / MS51 Electrical ratings 1 Thermal setting range (A) Trip class Rated operational current I e (A) Frame Sz. 3 Frame Sz. 3 MS50-0 MS50-50 MS51-16 MS51-50 Rated instantaneous short-circuit current setting I i (A) Single phase 2 AC Motor ratings, breaking all lines, 50/60 Hz (hp) Three phase 120V 20V 20V 80V 600V Catalog number 3 MS50-0 MS50-0E MS50-5 MS50-5E MS50-50 MS50-50E MS51-16 MS51-16E MS51-20 MS51-20E MS51-25 MS51-25E MS51-32 MS51-32E MS51-0 MS51-0E MS51-5 MS51-5E MS51-50 MS51-50E MS50 / MS51 Short circuit current ratings () Catalog number Max. fuse size (A) Fuse class UL Motor controllers, manual (NLRV) Circuit breaker Motor disconnect 20V 80V 600V Group motor installation 80Y/ 277V 600Y/ 37V Self-protected Type E 3 UL Combination motor controllers (NKJH) Self-protected Type F 80Y / 277V 600Y / 37V 80Y / 277V 600Y / 37V MS50-0x MS50-5x MS50-50x MS51-16x MCCB, MS51-20x Any 500A fuse MS51-25x max. class MS51-32x MS51-0x MS51-5x MS51-50x Type F contactors 1 Always size manual motor based on the full-load current of the motor. 2 For single phase connection diagram see page MS5x-xxE part numbers include the necessary components for Type E applications Self-protected Type E ratings apply only to these devices. Replace x in part number with E for self-protected Type E ratings. All other ratings leave blank. 5 MCCB interrupting rating must be equal to or greater than the rating of the device. Phone: Fax: Web: info@clrwtr.com

10 Type MS95 / MS96 For applications up to 100A MS Series Suitable applications: Single motor, suitable as motor disconnect Group motor installation Combination motor controller - Type E MS95 / MS96 Electrical ratings 1 Thermal setting range (A) Trip class Rated operational current I e (A) Frame Sz. Frame Sz. MS95-0 MS MS96-0 MS Rated instantaneous short-circuit current setting I i (A) AC Motor ratings, breaking all lines, 50/60 Hz (hp) Single phase 2 Three phase 120V 20V 20V 80V 600V Catalog number 3 MS95-0 MS95-0E MS95-50 MS95-50E MS95-63 MS95-63E MS95-75 MS95-75E MS95-90 MS95-90E MS MS95-100E MS96-0 MS96-0E MS96-50 MS96-50E MS96-63 MS96-63E MS96-75 MS96-75E MS96-90 MS96-90E MS MS96-100E MS95 / MS96 Short circuit current ratings () Catalog number Max. fuse size (A) Fuse class UL Motor controllers, manual (NLRV) UL Combination motor controllers (NKJH) Circuit Motor disconnect Group motor installation Self-protected Type E 3 Self-protected Type F breaker 20V 80V 600V 80Y/ 277V 600Y/ 37V 80Y / 277V 600Y / 37V 80Y / 277V 600Y / 37V MS95-0x MS95-50x MS95-63x MS95-75x MS95-90x MCCB, MS95-100x Any 500A fuse MS96-0x max. class MS96-50x MS96-63x MS96-75x MS96-90x MS96-100x Always size manual motor based on the full-load current of the motor. 2 For single phase connection diagram see page MS9x-xxE part numbers include the necessary components for Type E applications Self-protected Type E ratings apply only to these devices. Replace x in part number with E for self-protected Type E ratings. All other ratings leave blank. 5 MCCB interrupting rating must be equal to or greater than the rating of the device. Type F contactors Phone: Fax: Web: info@clrwtr.com

11 HK1-11 HKF1-11 HK-11 HKS-20 Auxiliary contacts Mounting Auxiliary contacts For use with MS position Pilot duty rating Instantaneous Lagging / leading / max x 9x quantity ac dc NO NC NO NC HK1-20 Right / 2 B600 Q HK1-02 Catalog number HK HK1-20L HKF1-11 Front / 1 B300 Q HKF HKS-11 Left / 1 A600 Q HKS HKS HK-11 Front / 1 C300 R HK-W SK1-11 CK1-11 SK-11 Signalling contacts Mounting For use with MS Pilot duty rating Contacts position Description / max x 9x quantity ac dc NO NC Trip (bell) Right / 1 B600 Q SK1-20 alarm - 2 SK1-02 Catalog number 1 1 SK1-11 Left / 1 A600 Q SK-11 Note(s): CK1-xx contacts must mount flush on the right side of the MS132; these devices are supplementary and not required for use in UL 508 Type E & F applications SK-11 contacts are required for UL 508 Type E applications using types MSxx; included when purchasing types MSxx-xxE AA1-2 UA1-2 AA-2 Trip units Shortcircuit 1 1 CK1-11 Right / 1 B600 Q CK1-20 trip alarm - 2 CK1-02 Brief voltage rating; For use with MS Mounting Voltage rating; continuous 5 seconds max. Catalog Description position / number x 9x max. quantity 50 Hz 60 Hz 50/60 dc 2 v v AA v v AA1-110 Left / v v AA1-230 Shunt v v AA1-00 trip 20 2 v v AA v v AA-110 Right / v v AA v v AA-00-2 v - - UA v 120 v - - UA v - - UA1-208 Left / v 20 v - - UA1-230 Undervoltage 15 v 80 v - - UA1-15 release v - - UA v - - UA v - - UA-120 Right / v - - UA v UA-00 Phone: Fax: Web: info@clrwtr.com

12 Actuation tables For Types MS116, MS132, MS5x, MS9x MS Series Auxiliary and signaling contact actuation tables Catalog number HK1-11 Description Off On Thermal overload trip Condition / state Short-circuit trip Under-voltage trip 1 NO O X X X X X NC X O O O O O 1 2 Terminal numbers Shunt trip x 9x HK NO O X X X X X 33 3, 3 HK NC X O O O O O 31 32, 1 2 HK1-20L 2 NO leading contacts O X X X X X 33 3, 3 HKF NO O X X X X X NC X O O O O O HKF NO O X X X X X 13 1, 23 2 HKS-11 1 NO O X X X X X NC X O O O O O 1 2 For use with MS HKS-20 2 NO O X X X X X 33 3, 3 HKS-02 2 NC X O O O O O 31 32, 1 2 HK-11 HK-W SK NO O X X X X X NC X O O O O O NO, leading (form C) O X X X X X NC (form C) X O O O O O NO O O X X X X NC X X O O O O SK NO O O X X X X 57 58, SK NC X X O O O O 55 56, SK-11 CK NO O O X X X X NC X X O O O O NO O O O X O O NC X X X O X X NO O O O X O O NC X X X O X X CK NO O O O X O O 77 78, CK NC X X X O X X 75 76, Note: X = Indicates closed state O = Indicates open state For connection diagrams, see page.17. Operator positions Type Off On Thermal overload trip Operator position Short-circuit trip Undervoltage trip Shunt trip Key MS116- MS132-1 MS5x- MS9x- 1 + I>> indicator window = red. Phone: Fax: Web: info@clrwtr.com

13 PS PS Three phase busbar For use with MS Rated current (A) Description x 9x 600 v ac Max. quantity of MMP s Max. quantity of auxiliary and signaling contacts per MMP Max. quantity of shunt trips or U.V. releases per MMP PS position 2 busbar 2 or 1 PS PS or 1 PS-2-2 Catalog number PS PS PS or 1 PS position PS busbar PS or 1 PS PS or 1 PS PS PS or 1 PS position - - PS busbar PS PS or 1 PS PS PS position 5 busbar 2 or 1 PS PS PS Empty position busbar cover BS1-3 Empty position busbar cover BS-3 Note: Use of PS1 or PS busbar in group motor or self-protected Type E or F applications does not inhibit or alter the short-circuit current ratings for the devices utilized. S1-M3-25 DX95 Three phase feeder terminals Rated current For use with MS Description (A) x 9x 600 v ac Connecting capacity (AWG) Required for UL 508 Types E or F applications Feeder terminal S1-M3-25 Catalog number S1-M S1-M S1-M /0 S-M1 Type E terminal ins. barrier /0 DX95 Note(s): Only the S1-M3-xx terminals are acceptable for UL 508 Type E or F applications using type MS132. The DX95 terminal is included when purchasing type MS9x-xxE devices. Terminal shrouds For use with MS Catalog Description x 9x number KA50 Terminal shroud, short KA95 Terminal shroud, long KA95C KA50 Phone: Fax: Web: info@clrwtr.com

14 Accessories For Types MS116, MS132 ABB can also be connected to the SMISSLINE power distribution bus system, which provides a versatile and flexible means of distributing power to a wide variety of electrical devices. For complete system information, see Section 2. SMISSLINE busbar adaptors for types MS116 / MS132 For use with MS x 9x Description Catalog number Adaptor, L1,L2,L3 bottom feed ZMS930 Adaptor, L1,L2,L3 top feed ZMS932 Adaptor, without feed wires ZMS139 9 mm wide additional housing ZMS935 Note(s): The 9 mm wide additional housing is needed when an odd number of combi modules are plugged on the socket; required to fill space into a full module (18 mm). The 9 mm wide additional housing must also be used when a side-mount auxiliary contact is used. SMISSLINE busbar combi modules for types MS116 / MS132 + AF Contactors For use with MS x 9x Description Catalog number Combi module, L1,L2,L3 top feed ZMS930 Combi module, without feed wires ZMS137 Connection pin set for mounting two combi modules side-by-side E210-SPV Phone: Fax: Web: info@clrwtr.com

15 Locking accessories For use with MS SA1 SA x 9x Description Catalog number Lock adapter SA1 Padlock + 2 keys SA2 Lock adapter + padlock + 2 keys SA3 Note: Types MS132 and MSxx have integral locking mechanisms DMS132-G Door mount kits - Type 12 & IP 65 For use with MS x 9x Description Rotary positions Catalog number Door mount w/ handle, black/gray On / Trip / Off DMS132-G Door mount w/ handle, red/yellow On / Trip / Off DMS132-Y Note(s): Type MS116 devices trip to the Off position Max. 3 padlocks with bail diameter Ø 6.5 mm MSHD-LY MSHD-LTY 1SAM101923R0002 1SAM10192R0013 1SAM201920R1000 Through-door hardware - Types 1, 3R, 12 and IP 6 For use with MS x 9x Description Rotary positions Catalog number On / Off MSHD-LB Selector handle, black, defeatable, padlockable On / Trip / Off MSHD-LTB On / Off MSHD-LY Selector handle, red/yellow, defeatable, padlockable On / Trip / Off MSHD-LTY Shaft coupler, coded, 6 mm, MSMN - 1SAM101923R0002 Shaft coupler, un-coded, 6 mm, MSMNO - 1SAM101923R0012 Drive spindle, 6 x 30 mm, for horizontal mounting, MSOX-30-1SAM10192R0013 Drive spindle, 6 x 32 mm, for vertical (standard) mounting, MSOX-32-1SAM10192R0003 Shaft, 6 x 85 mm - OXS6X85 Shaft, 6 x 105 mm - OXS6X105 Shaft, 6 x 130 mm - OXS6X130 Shaft, 6 x 180 mm - OXS6X180 Shaft alignment ring, MSH-AR - 1SAM201920R1000 Note(s): Through-door selector handles are rated Type 1, 3R and 12; IP 6 degree of protection Max. 3 padlocks with bail diameter Ø 5 8 mm For coded shaft couplers, the On position is dependent on the mounting orientation of the MMP Must have handle, shaft coupler and shaft for through-door operation. Drive spindles can replace both shaft coupler and shaft. Enclosures - Type 12 & IP 65 For use with MS x 9x Description Rotary positions Catalog number Molded plastic enclosure, black/gray On / Trip / Off IB132-G Molded plastic enclosure, red/yellow On / Trip / Off IB132-Y Adaptor, PG16 to 1/2 NPT - PG16-1/2NPT Note(s): Type E rating for MS132 derated when using IB132 enclosures. Please contact technical support. Type MS116 devices trip to the Off position Max. 3 padlocks with bail diameter Ø 6.5 mm For UL enclosure type ratings, contact technical support. IB132-G Phone: Fax: Web: info@clrwtr.com

16 Accessories For Types MS116, MS132, MS5x, MS9x Close couplers for contactors protector MS MS B6...B7 Miniature contactors BC6...BC7 AF09...AF16 AF09Z...AF16Z AF26...AF38 AF contactors AS contactors A / AE Contactors AF26Z...AF38Z AF50...AF75 BEA7/132 AF95...AF110 BEA16- AS09...AS16 BEA26- ASL09...ASL16 A50...A75, AE50...AE75 A95...A110 BEA16-3 BEA16- BEA38- MS BEA38- MS MS MS BEA7/132 BEA16- BEA26- BEA16-3 BEA7/132 BEA16- BEA38- BEA16-3 BEA16- BEA38- MS BEA38- MS5x-0 50 BEA50/50 MS9x BEA75/95 MS BEA110/95 Note: For spring terminated AS/ASL, use part number BEA16-3U with integral wire leads for spring terminals. Catalog number Close couplers for softstarters PSR Softstarters protector PSR3 PSR16 PSR25 PSR30 PSR37 PSR5 PSR60 PSR105 Catalog number MS132 + PSR Softstarter MS132 + AF Contactor BEA16- BEA16-3 MS PSR16-MS116 MS PSR30-MS132 MS PSR16-MS116 MS PSR30-MS132 MS5x-0 50 PSR5-MS50 MS9x PSR105-MS95 Phone: Fax: Web: info@clrwtr.com

17 Current limiters For use with MS x 9x Description Note(s): Rated current (A) 600 v ac Connecting capacity (AWG) Catalog number S803W-SCL32-SR Current limiter, 3-pole S803W-SCL63-SR S803W-SCL100-SR The sum of the rated currents of all downstream motor shall not exceed the rated current of the S803W. The sum of all load currents including inrush currents shall not exceed the maximum permissible load of the S803W. S803W-SCL32-SR MS132 Short circuit current ratings using S803W current limiters () Catalog number UL Motor controllers, manual (NLRV) Circuit breaker Group motor installation 1 20V 80V 600V 80Y/ 277V Self-protected Type E 2 UL Combination motor controllers (NKJH) 600Y/ 37V 80Y/ 277V Self-protected Type F 2 600Y/ 37V Type F contactors MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS MCCB, 00A AF26 AF38 MS max AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 MS AF26 AF38 Maximum load time [s] Also suitable for Tap Conductor protection. 2 Requires the use of a line-side feeder terminal S1-M3-xx; see accessories section. 3 MCCB interrupting rating must be equal to or greater than the rating of the device n x Ie Phone: Fax: Web: info@clrwtr.com

18 Connection diagrams For Types MS116, MS132, MS5x, MS9x MS Series Connection diagrams Three phase connection diagram for Types MS116, MS132, and MSxx Single phase connection diagram for Types MS116, MS132, and MSxx Single and three phase connection diagram when using contactors I> I> I> 1/L1 3/L2 5/L3 2/T1 /T2 6/T3 1/L1 3/L2 5/L3 Q I> I> I> /L1 3/L2 5/L3 2/T1 /T2 6/T3 1/L1 3/L2 5/L3 KM1 A1 A2 2/T1 /T2 6/T /T1 /T2 6/T U V M ~ W U M ~ 3 Phase Single Phase V Accessories for use with Type MS116, MS132 & MSxx AA1... AA... C1 C HKF1-02 HK SK CK UA1... UA... D1 U< D2 1 L1 3 L2 5 L HKF1-20 SK1-20 CK1-20 HK HKF1-11 HK HK1-11 HKS SK1-11 SK CK1-11 SK-11 I> I > I> 2 T1 T2 6 T3 Phone: Fax: Web: info@clrwtr.com

19 S1-M2-25 PS phase busbar up to 65 A S1-M1-25 PS BS1-3 3-phase busbar up to 92 A S1-M1-25 PS HK1 SK1 BS1-3 HK1 HK1 SK1 SA1 CK1 AA1 MS116 HK1 CK1 UA1 MS132 HKF1 Phone: Fax: Web: info@clrwtr.com

20 Technical data - IEC/EN MS116 Main circuit Utilization characteristics according to IEC/EN Type MS116 Standards IEC/EN , IEC/EN , IEC/EN Rated operational voltage U e 690 V AC Rated frequency 50/60 Hz Trip class 10A Number of poles 3 Duty time 100 % Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 690 V AC Rated operational current I e See ordering details Rated instantaneous short-circuit current setting I i See ordering details Rated service short-circuit breaking capacity I cs See table "Short-circuit breaking capacity and back-up fuses" Rated ultimate short-circuit breaking capacity I cu See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses l CS l CU I CC Rated service short-circuit breaking capacity Rated ultimate short-circuit breaking capacity Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if I CC > I CS Type 230 V AC 00 V AC 0 V AC 500 V AC 690 V AC I CS I CU gg, am A I CS I CU gg, am A I CS MS MS MS MS No back-up fuse required up to I CC = 30 MS MS No back-up fuse required up to I CC = 50 MS MS MS MS MS MS MS MS MS I CU gg, am A MS116-10: No need for back-up fuse in networks with a prospective current of up to 50 at 00 V. MS116-16: No need for back-up fuse in networks with a prospective current of up to 16 at 00 V. With an appropriate 80 A type gg fuse the device can be used in a network with a prospective current of up to 100. MS116-32: No need for back-up fuse in networks with a prospective current of up to 15 at 00 V. I CS I CU gg, am A I CS I CU gg, am A Phone: Fax: Web: info@clrwtr.com

21 Technical data - UL/CSA MS116 Type Standards UL 508, CSA 22.2 No. 1 Maximum operational voltage 600 V AC controller ratings See table "UL 508 controller" Trip rating 125 % FLA Motor ratings Horse power See table "Motor rating, three phase" Full load amps (FLA) See table "Motor rating, three phase" Locked rotor amps (LRA) See table "Motor rating, three phase" MS116 Motor rating, three phase hp FLA LRA Horse power Full load amps Locked rotor amps Type V AC V AC 0-80 V AC V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MS MS MS MS MS / MS / / MS / / MS MS / / MS / MS / / MS MS MS / MS Suitable as motor disconnect only when provided with padlock SA1 or SA3... Phone: Fax: Web: info@clrwtr.com

22 Technical data MS116 General technical data Type Pollution degree 3 Phase loss sensitive Yes Ambient air temperature Operation Open - compensated without derating C Open C Enclosed (IB132) C Storage C Ambient air temperature compensation Continuous Maximum operating altitude permissible 2000 m Resistance to shock acc. to IEC g / 11 ms Resistance to vibrations acc. to IEC g / Hz Mounting position Position 1-6 (optional for single mounting) Mounting DIN-rail (EN 60715) Group mounting On request Minimum distance to other Horizontal 0 mm units same type Vertical 150 mm Minimum distance to Horizontal, up to 00 V 0 mm electrical conductive board Horizontal, up to 690 V > 1.5 mm Vertical 75 mm Degree of protection Enclosure / terminals IP20 Main circuit Connecting characteristics MS116 Type MS A MS A Connecting capacity Solid 1 or 2 x 1... mm² mm² Flexible 1 or 2 x mm² mm² Stranded acc. to UL/CSA 1 or 2 x AWG AWG 12-8 Flexible acc. to UL/CSA 1 or 2 x AWG AWG 12-8 Stripping length 9 mm 10 mm Tightening torques Nm / Ib.in 2.0 Nm / 18 Ib.in Connection screw M3.5 (Pozidriv 2 / 5.5 mm) M (Pozidriv 2 / 6.5 mm) Phone: Fax: Web: info@clrwtr.com

23 Technical data - IEC/EN MS132 Type MS132 Standards IEC/EN , IEC/EN , IEC/EN Rated operational voltage U e 690 V AC / 250 V DC Rated frequency DC, 50/60 Hz Trip class 10 (10A for MS ) Number of poles 3 Duty time 100 % Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 690 V AC Rated operational current I e See ordering details Rated instantaneous short-circuit current setting I i See ordering details Rated service short-circuit breaking capacity I cs See table "Short-circuit breaking capacity and back-up fuses" Rated ultimate short-circuit breaking capacity I cu See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses l CS l CU I CC Rated service short-circuit breaking capacity Rated ultimate short-circuit breaking capacity Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if I CC > I CS Type 230 V AC 00 V AC 0 V AC 500 V AC 690 V AC MS MS MS MS MS MS MS I CS I CU gg, am A No back-up fuse required up to I CC = 100 I CS I CU gg, am A I CS MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS * * 3 3 * MS132-16: No need for back-up fuse in networks with a prospective current of up to 100 at 00 V. MS132-32: No need for back-up fuse in networks with a prospective current of up to 50 at 00 V. With an approbiate 125 A type gg fuse the device can be used in a network with a prospective current of up to 100 * not available yet I CU gg, am A I CS I CU gg, am A I CS I CU gg, am A Phone: Fax: Web: info@clrwtr.com

24 Technical data - UL/CSA MS132 Main circuit Utilization characteristics according to UL/CSA Type Standards UL 508, CSA 22.2 No. 1 Maximum operational voltage 600 V AC controller ratings See table "UL 508 controller" Trip rating 125 % FLA Motor ratings Horse power See table "Motor rating, three phase" Full load amps (FLA) See table "Motor rating, three phase" Locked rotor amps (LRA) See table "Motor rating, three phase" MS132 Motor rating, three phase hp FLA LRA Horse power Full load amps Locked rotor amps Type V AC V AC 0-80 V AC V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA MS MS MS MS MS / MS / / MS / / MS MS / / MS / / MS / / MS MS MS / MS Phone: Fax: Web: info@clrwtr.com

25 Technical data MS132 Type Pollution degree 3 Phase loss sensitive Yes Ambient air temperature Operation Open - compensated without derating C Open C Enclosed (IB132) C Storage C Ambient air temperature compensation Continuous Maximum operating altitude permissible 2000 m Resistance to shock acc. to IEC Resistance to vibrations acc. to IEC g / 11 ms 5 g / Hz Mounting position Position 1-6 (optional for single mounting) Mounting DIN-rail (EN 60715) Group mounting On request Minimum distance to other Horizontal 0 mm units same type Vertical 150 mm Minimum distance to Horizontal, up to 00 V 0 mm electrical conductive board Horizontal, up to 690 V > 1.5 mm Vertical 75 mm Degree of protection Enclosure / terminals IP20 MS132 Main circuit Connecting characteristics Type MS MS MS MS MS MS Connecting capacity Solid 1 or 2 x 1... mm² 1... mm² mm² Flexible 1 or 2 x mm² mm² mm² Stranded acc. to UL/CSA 1 or 2 x AWG AWG AWG 12-8 Flexible acc. to UL/CSA 1 or 2 x AWG AWG AWG 12-8 Stripping length 9 mm 10 mm 10 mm Tightening torques Nm / Ib.in 1.5 Nm / 1 Ib.in 2.0 Nm / 18 Ib.in Connection screw M3.5 (Pozidriv 2) M (Pozidriv 2) M (Pozidriv 2) Phone: Fax: Web: info@clrwtr.com

26 Technical data MS116 & MS132 Accessories General technical data Type PS1-x-x-65 PS1-x-x-100 S1-M1-25 S1-M2-25 S1-M3-25 S1-M3-35 Standards IEC/EN , UL 508/ A, CAN/CSA C22.2 No.1/ Rated operational voltage U e 690 V AC Rated voltage UL/CSA 600 V AC Rated operational current I e 65 A 100 A 65 A 100 A Rated current UL/CSA 65 A 92 A 65 A 92 A Rated frequency 50/60 Hz Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 690 V AC Pollution degree 3 Cross-section 5 mm² 5 mm² Ambient air temperature Operation C Storage C Connecting characteristics Type S1-M1-25 S1-M2-25 S1-M3-25 S1-M3-35 Connecting capacity Solid 1 x 6mm2 25 mm mm² Flexible 1 x 6mm2 16mm mm² Stranded acc. to UL/CSA 1 x AWG 10- AWG 8-2 Flexible acc. to UL/CSA 1 x AWG 10- AWG 8-2 Tightening torques 2.5 Nm / 22 lb.in.5 Nm / 0 lb.in Connection screw Pozidriv 2 / M3.5 Hexgon SW General technical data Type UA1 AA1 Standards IEC/EN , UL 508/ A, CAN/CSA C22.2 No.1/ Pick-up value % of Uc Drop-out value % of Uc Power consumption Pick-up VA 9 Holding VA 3 Ambient air temperature Operation C Storage C Connecting characteristics Type UA1 AA1 Connecting capacity Solid 1 x mm² 2 x mm² Flexible 1 x mm² 2 x mm² Stranded acc. to UL/CSA 1 or 2 x AWG 18-1 Flexible acc. to UL/CSA 1 or 2 x AWG 18-1 Stripping length 8 mm Tightening torques Nm / Ib.in Connection screw Pozidriv 2 / M3 Phone: Fax: Web: info@clrwtr.com

27 Contact utilization characteristics per IEC Type HKF1-xx HK1-xx HK1-20L SK1-xx CK1-xx Standards IEC/EN Rated operational voltage U e 250 V AC/ 690 V AC/ 250 V DC 600 V DC Conventional free-air thermal current I th 5 A 6 A Rated frequency 50/60 Hz Rated impulse withstand voltage U imp 6 kva Rated insulation voltage U i 230 V 690 V Pollution degree 3 Ambient air temperature Operation C Storage C Resistance to shock acc. to IEC g / 11 ms Resistance to vibrations acc. to IEC g / Hz Number of poles 1 N.C. + 1 N.O. or 2 N.O. or 2 N.C. 2 leading N.O. 1 N.C. + 1 N.O. or 2 N.O. or 2 N.C. I e / Rated operational current AC-15 acc. to IEC/EN for utilization category 2 V, 50/60 Hz V, 50/60 Hz V, 50/60 Hz V, 50/60 Hz V, 50/60 Hz - 1 I e / Rated operational current DC-13 acc. to IEC/EN for utilization category 2 V V V V Minimum switching capacity 17 V / 5 ma Short-circuit protective device 10 A Type gg Duty time 100 % Mounting Front of MMS Right side of MMS Mounting positions 1-6 Mechanical durability cycles Electrical durability cycles Contact utilization characteristics per UL/CSA Type HKF1-xx HK1-xx HK1-20L SK1-xx CK1-xx Standards UL 508/ A, CAN/CSA C22.2 No.1/ Rated voltage UL/CSA 20 V AC/ 250 V DC 600 V AC/ 600 V DC Pilot duty B300, Q300 B600, Q600 AC thermal rated current 5 AC maximum volt-ampere making 3600 AC maximum volt-ampere breaking 360 DC thermal rated current 2.5 DC maximum volt-ampere make/break 69 Connecting characteristics Type HKF1-xx HK1-xx HK1-20L SK1-xx CK1-xx Connecting capacity Solid 1 or 2 x mm² Flexible 1 or 2 x mm² Flexible with non-insulated ferrule 1 or 2 x mm² Flexible with insulated ferrule 1 or 2 x mm² Stranded acc. to UL/CSA 1 or 2 x AWG 16-1 Flexible acc. to UL/CSA 1 or 2 x AWG 16-1 Stripping length 8 mm Tightening torques Nm / Ib.in Connection screw Pozidriv 2 / M3 Phone: Fax: Web: info@clrwtr.com

28 Technical data - IEC/EN MS5x & MS9x MS Series Main circuit Utilization characteristics according to IEC/EN Type MS5x, MS9x Standards IEC/EN , IEC/EN , IEC/EN Rated operational voltage U e 690 V AC / 50 V DC Rated frequency 50/60 Hz Trip class 10, 20 Number of poles 3 Duty time 100 % Rated impulse withstand voltage U imp 6 kv Rated insulation voltage U i 690 V AC Rated operational current I e See ordering details Rated instantaneous short-circuit current setting I i See ordering details Rated service short-circuit breaking capacity I cs See table "Short-circuit breaking capacity and back-up fuses" Rated ultimate short-circuit breaking capacity I cu See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses l CS l CU I CC Rated service short-circuit breaking capacity Rated ultimate short-circuit breaking capacity Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if I CC > I CS Type 20 V AC 00 V AC 0 V AC 500 V AC 690 V AC I CS I CU gg, am A I CS I CU gg, am A I CS I CU gg, am A I CS I CU gg, am A I CS Short-circuit protection MS5x MS5x No back-up fuse required up to MS5x I CC = 100 MS5x MS5x: No need for back-up fuse in networks with a prospective current of up to 50 at 00 V. With an appropriate 160 A type gg fuse the device can be used in a network with a prospective current of up to 100. I CU gg, am A Short-circuit protection MS9x MS9x MS9x MS9x-63 No back-up fuse required up to MS9x-75 I CC = MS9x MS9x MS9x-0: No need for back-up fuse in networks with a prospective current of up to 50 at 00 V. With an appropriate 125 A type gg fuse the device can be used in a network with a prospective current of up to 100. MS9x-100: No need for back-up fuse in networks with a prospective current of up to 50 at 00 V. With an appropriate 160 A type gg fuse the device can be used in a network with a prospective current of up to 100. Phone: Fax: Web: info@clrwtr.com

29 Main circuit Utilization characteristics according to UL/CSA Type MS5x, MS9x Standards UL 508, CSA 22.2 No. 1 Maximum operational voltage controller ratings Trip rating 600 V AC See table UL 508 controller 125 % FLA Motor ratings Horsepower See table Motor rating, three phase Motor rating, three phase hp Horsepower FLA Full load amps (FLA) LRA Locked rotor amps (LRA) Full load amps (FLA) See table Motor rating, three phase Locked rotor amps (LRA) See table Motor rating, three phase Type 208 V AC V AC 0-80 V AC V AC hp FLA LRA hp FLA LRA hp FLA LRA hp FLA LRA Types MS50 / MS51 MS MS MS MS MS5x MS5x MS5x Types MS95 / MS96 MS9x MS9x MS9x MS9x MS9x MS9x Phone: Fax: Web: info@clrwtr.com

30 Technical data MS5x & MS9x General technical data Type MS5x MS9x Pollution degree 3 Phase loss sensitive Yes Ambient air temperature Operation Open - compensated without derating C Open C Enclosed C Storage C Ambient air temperature compensation Continuous Maximum operating altitude permissible 2000 m Resistance to shock acc. to IEC g / 11 ms - Resistance to vibrations acc. to IEC g / Hz Mounting position Position 1-6 (optional for single mounting) Mounting DIN-rail 35 mm (EN 60715) DIN-rail 15 mm / 75 mm (EN 60715) Minimum distance to other units same type Minimum distance to electrical conductive board Horizontal 0 mm 0 mm Vertical - up to 20 V - 50 mm Vertical - up to 0 V - 70 mm Vertical - up to 500 V mm Vertical - up to 690 V mm Vertical 50 mm - Horizontal 10 mm - Horizontal - up to 500 V - 10 mm Horizontal - up to 690 V - 30 mm Vertical - up to 20 V - 50 mm Vertical - up to 0 V - 70 mm Vertical - up to 500 V mm Vertical - up to 690 V mm Vertical 50 mm - Degree of protection Enclosure / terminals IP20 Main circuit Connecting characteristics Type MS5x MS9x Connecting capacity Solid 1 or 2 x mm² mm² Flexible 1 x 2 x mm² mm² mm² mm² Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 x 2 x 1 x 2 x AWG 18-2 AWG 18-2 AWG 18-2 AWG 18-2 AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 Stripping length 13 mm 17 mm Tightening torques Nm / 27 0 Ib.in - 6 Nm / Ib.in Connection screw Pozidriv 2 Hexagon Phone: Fax: Web: info@clrwtr.com