Ω 1 Ω Supplementary Fuses

Transcription

1 Electrical - Power Fuses Ω 1 Ω Supplementary Fuses BAF Fast Acting Ω 1 Ω (10.3mm 38.1mm) Construction: Fibre Tube; Nickel Plated Brass Endcaps Voltage Rating: 250Vac ( Ω º-15A), 125Vac (20-30A) Interrupting Rating: 10,000A at 125Vac UL 0-15/250V, Guide JDYX, File E19180 CSA Certified, 0-15/250V, Class , File V * 250V * 250V * 125V BAF- Ω º BAF-1 Ω BAF-6 Ω BAF-20 BAF- Ω BAF-1 Ω º BAF-7 BAF A BAF- Ω BAF-2 100A BAF-8 200A BAF-30 BAF-flΩ º 35A BAF-2 Ω BAF-9 BAF- Ω º BAF-1 BAF-3 BAF-4 BAF-5 BAF-6 BAF-10 *All have interrupting rating of 10,000A at 125V. Data Sheet: 2011 (0-30) BAF A BAF A CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. BAN Fast Acting Ω 1 Ω (10.3mm 38.1mm) - 5AG Construction: Fibre Tube Voltage Rating: 250Vac Interrupting Ratings: Military Tested 35A ( A) 100A (3.6-10A) 200A ( A) 750A ( A) 250V 250V 250V 250V BAN-1 BAN-5 BAN-12 BAN-30 BAN-2 BAN-6 BAN-15 BAN-3 BAN-8 BAN-20 BAN-4 BAN-10 BAN-25 Recommended Fuseblocks Data Sheet: 2046 (0-30) Recommended fuseblocks/fuseholders for 13/32 x 1-1/2 fuses Open fuseblocks - see page 64, 66 Finger-safe fuseholders - see pages 41-44, 65 Panel-mount fuseholders - see page In-line fuseholders - see page Terminal Type Screw Pressure with Plate w/ Quick Quick Box Amps Poles Connect Connect Lug Ω º 1 BM6031SQ BM6031PQ BM6031B to 2 BM6032SQ BM6032PQ BM6032B 30 3 BM6033SQ BM6033PQ BM6033B KTK and KLM Fast Acting Ω 1 Ω (10.3mm 38.1mm) Construction: Melamine Tube; Nickel Plated Brass Endcaps Voltage Rating: KTK - 600Vac or less KLM - Ω º- Ω A: 500Vac/600Vdc Ω º-10A: 500Vac/dc, 12-30A: 500Vac/600Vdc Interrupting Rating: 100,000A - KTK; 10,000A - KLM, RMS SYM. (UL) KTK-UL Listed, Guide JDYX, File E19180 KLM-UL Recognized, Guide JFHR2, File E56412 CSA Certified, File 53787, Class , HRC-Misc 600Vac - UL Listed and C.S.A. KTK- Ω º KTK- Ω KTK-4 KTK-12 KTK- Ω KTK-1 KTK-5 KTK-15 KTK- Ω º KTK-1 Ω KTK-6 KTK-20 KTK- Ω KTK-1 Ω KTK-7 KTK-25 KTK- Ω º KTK-2 KTK-7 Ω KTK-30 KTK- Ω º KTK-2 Ω KTK-8 KTK- Ω KTK-3 KTK-9 KTK-flΩ º KTK-3 Ω KTK-10 *500Vac/dc - UL Recognized and C.S.A. KLM- Ω º KLM- Ω KLM-5 KLM-20 KLM- Ω KLM-1 KLM-6 KLM-25 KLM- Ω º KLM-1 Ω KLM-8 KLM-30 KLM- Ω KLM-2 KLM-10 KLM- Ω º KLM-3 KLM-12 KLM- Ω KLM-4 KLM-15 *KLM-( Ω º- Ω & 12-30): 500VAC/600Vdc CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. Data Sheet: KTK-1011 KLM

2 Medium Voltage Fuses and Fuse Links Medium Voltage, Fast Acting Fuses HVA, HVB, HVJ, HVL, HVR, HVT, HVU, HVW & HVX Non-Time Delay Ampere Ratings: Voltage Rating: 1000 to 10,000V HVA (1000 Volts) (Max. S.C. 20KW dc, 30KVA ac) Length *Wt./100 Amps Dia. In. mm Lbs. Kg Ω Ω Ω 1 Ω 1 Ω Ω º Ω º 3 Ω º 4 Ω 6 Ω 10 HVB (2500V) (Max. S.C. 20KW dc, 30KVA ac) Ω 1 Ω Ω HVJ (5000V) (Max. S.C. 20KW dc, 30KVA ac) Ω 1 Ω Ω 2 Ω 4 Ω Ω 10 1 HVL (10,000V) (Max. S.C. 20KW dc, 30KVA ac) Ω 1 Ω 1 Ω Ω 2 Ω 3 HVR (1000V) (Max. S.C. kva-500 ac only) Ω HVW (1200V) (Max. S.C. kva-12,000 ac only) HVT (2500V) (Max. S.C. kva-1250 ac only) Ω HVU (5000V) (Max. S.C. kva-2500 ac only) Ω HVX (10,000V) (Max. S.C. kva-5,000 ac only) Ω *Shipping. Carton quantity: 10. Test Specifications Catalog Number Load Opening Time HVA HVB 110% 4 Hours (min.) HVJ 135% 1 Hour (max.) HVL HVR HVT HVU 100% 4 Hours (min.) 150% 1 Hour (max.) HVW HVX 4528, 4529, 4530 & 2960 Fuseblocks Voltage Rating: 1000 to 10,000V For Fuse Sym. HVA HVR HVB HVT HVJ HVU HVL HVX Use #8 screws on blocks 4528 and Use #10 screws on blocks 4530 and Block Cat. No Data Sheet:

3 High Speed Fuses North American Style FWX 250V Voltage Rating: 250Vac/250Vdc (250Vdc rating on 35 through 800A only.) Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, Std , A Watts loss provided at rated current. Electrical Characteristics Rated I 2 t (A 2 100kA Current Clearing Watts RMS-Amps Pre-arc at 250V Loss Ordering Information Part Number Carton Qty. Carton Weight (lbs) FWX-35A FWX-40A FWX-45A FWX-50A FWX-60A FWX-70A FWX-80A FWX-90A FWX-100A FWX-125A FWX-150A FWX-175A FWX-200A FWX-225A FWX-250A FWX-275A FWX-300A FWX-350A FWX-400A FWX-450A FWX-500A FWX-600A FWX-700A FWX-800A FWX-1000AH FWX-1200AH FWX-1500AH FWX-1600AH FWX-2000AH FWX-2500AH Data Sheet:

4 High Speed Fuses North American Style FWH 500V Voltage Rating: 500Vac/500Vdc (500Vdc rating applies to 35 through 800A only.) Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, Std , A; CSA Component Acceptance A Watts loss provided at rated current. Electrical Characteristics Rated I 2 t (A 2 100kA Current Clearing Watts RMS-Amps Pre-arc at 500V Loss Ordering Information Part Number Carton Qty. Carton Weight (lbs) FWH- 35B FWH-40B FWH-45B FWH-50B FWH-60B FWH-70B FWH-80B FWH-90B FWH-100B FWH-125B FWH-150B FWH-175B FWH-200B FWH-225A FWH-250A FWH-275A FWH-300A FWH-325A FWH-350A FWH-400A FWH-450A FWH-500A FWH-600A FWH-700A FWH-800A FWH-1000A FWH-1200A FWH-1400A FWH-1600A Data Sheet:

5 High Speed Fuses North American Style KAC 600V Voltage Rating: 600Vac Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, Std ,1-600A For new installations, Bussmann recommends the 700V FWP series fuse. The 600V fuses are supplied as replacements only. Ordering Information Part Number Carton Qty. Carton Weight (lbs) KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KAC KBC 600V Voltage Rating: 600Vac Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, Std , A For new installations, Bussmann recommends the 700 Volt FWP series fuse. The 600V fuses are supplied as replacements only. Ordering Information Part Number Carton Qty. Carton Weight (lbs) KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC KBC Data Sheet: Data Sheet:

6 High Speed Fuses North American Style FWP 700V Voltage Rating: 700Vac/700Vdc (700Vdc rating applies to 5 through 800A only.) Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, Std ; CSA Component Acceptance Watts loss provided at rated current. Electrical Characteristics Rated I 2 t (A 2 100kA Current Clearing Watts RMS-Amps Pre-arc at 700V Loss Ordering Information Part Number Carton Qty. Carton Weight (lbs) FWP-5B FWP-10B FWP-15B FWP-20B FWP-25B FWP-30B FWP-35B FWP-40B FWP-50B FWP-60B FWP-70B FWP-80B FWP-90B FWP-100B FWP-125A FWP-150A FWP-175A FWP-200A FWP-225A FWP-250A FWP-300A FWP-350A FWP-400A FWP-450A FWP-500A FWP-600A FWP-700A FWP-800A FWP-900A FWP-1000A FWP-1200A Data Sheet:

7 High Speed Fuses Ferrule Style FWX 250Vac/250Vdc (250Vdc on 5 through 30) Interrupting Rating: 200kA RMS Symmetrical. Agency Information: UL Recognized, 250V, Std & CSA Component Acceptance Watts loss provided at rated current. Electrical Characteristics I 2 t (A 2 SEC) Rated Current Clearing Watts Size RMS-Amps Pre-arc at 250V Loss mm Ordering Information Part Number Carton Qty. Carton Weight (Kg) FWX-1A14F FWX-2A14F FWX-3A14F FWX-4A14F FWX-5A14F FWX-10A14F FWX-15A14F FWX-20A14F FWX-25A14F FWX-30A14F FWX-50A14F Fuse Block: (pole) Data Sheet: 1210 FWH 500Vac/500Vdc Interrupting Rating: 6 mm 32 mm (Interrupting rating variessee Data Sheet for details) 14 mm x 51 mm (200kA RMS Symmetrical). Electrical Characteristics I 2 t (A 2 SEC) Rated Current Clearing Watts Size RMS-Amps Pre-arc at 500V Loss x 32 mm ( Ω 1 Ω ) mm ( Ω ) Data Sheet: 14mm 51mm, & 6mm 32mm, Data Sheet: Agency Information: UL Recognized, 500V, Std & CSA Component Acceptance Watts loss provided at rated current. ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. Ordering Information Part Number Carton Qty. Carton Weight (Kg) FWH-.250A6F* FWH-.500A6F* FWH-001A6F* FWH-002A6F* FWH-3.15A6F* FWH-005A6F* FWH-6.30A6F* FWH-007A6F* FWH-010A6F FWH-12.5A6F FWH-015A6F FWH-016A6F FWH-020A6F FWH-025A6F FWH-030A6F FWH-1A14F FWH-2A14F FWH-3A14F FWH-4A14F FWH-5A14F** FWH-6A14F** FWH-10A14F** FWH-12A14F** FWH-15A14F** FWH-20A14F** FWH-25A14F** FWH-30A14F** *CSA Component Acceptance **UL Recognized & CSA Component Acceptance at 500Vdc 152

8 Electrical - Power Fuses Low-Peak Dual-Element, Time-Delay, Class J Fuses LPJ_SP Dual-Element, Time-Delay 10 seconds (minimum) at 500% rated current Ampere Ratings: 1-600A Voltage Rating: 600Vac (or less), 300Vdc (or less) Current Limiting Interrupting Rating: ac 300,000A RMS Sym. dc 100,000A Agency Information: UL Listed - Special Purpose**, Guide JFHR, File E56412 CSA Certified (200,000 A) Class J per CSA-22.2 No , Class , File Dimensions: See pages 2-3 for Class J dimensional data. Catalog Numbers LPJ-1SP LPJ-4 Ω SP LPJ-25SP LPJ-125SP LPJ-1 Ω SP LPJ-5SP LPJ-30SP LPJ-150SP LPJ-1flΩ ºSP LPJ-5flΩ ºSP LPJ-35SP LPJ-175SP LPJ-1 Ω ºSP LPJ-6SP LPJ-40SP LPJ-200SP LPJ-2SP LPJ-7SP LPJ-45SP LPJ-225SP LPJ-2 Ω SP LPJ-8SP LPJ-50SP LPJ-250SP LPJ-2 Ω SP LPJ-9SP LPJ-60SP LPJ-300SP LPJ-2 Ω ºSP LPJ-10SP LPJ-70SP LPJ-350SP LPJ-3SP LPJ-12SP LPJ-80SP LPJ-400SP LPJ-3 Ω ºSP LPJ-15SP LPJ-90SP LPJ-450SP LPJ-3 Ω SP LPJ-17 Ω SP LPJ-100SP LPJ-500SP LPJ-4SP LPJ-20SP LPJ-110SP LPJ-600SP **Meets all performance requirements of UL Standard for Class J fuses. Available with silver plated terminals. Add SP/ in front of part number. Carton Quantity and Weight Ampere Carton Weight* Ratings Qty. Lbs. Kg *Weight per carton. Recommended fuseblocks/fuseholders for Class J 600V fuses Open fuseblocks - see pages Finger-safe fuseholders for 30A & 60Asee pages Modular fuseblocks - see page 67 Time-Current Classification CurvesAverage Melt TIME IN SECONDS A 3A 6A 10 10A 15A Current Limitation Curves INSTANTANEOUS PEAK LET-THRU CURRENT IN AMPS LPJ Current Limitation Curves 100,000 10,000 1,000 A ,000 30A A 80A 100A 125A CURRENT IN AMPERES 10, A 250A PROSPECTIVE SHORT-CCUIT CURRENT SYMMETRICAL RMS AMPS 400A 1,000 B 600A 100,000 AMPERE RATING 200, ,000 10, A 400A 200A 100A 60A 30A 15A AMPERE RA TING Data Sheet: 1006 (0-60) and 1007 (70-600) 17

9 Fuseblocks, Holders and Terminal Blocks For Ω 1 Ω Fuses Series 8000 Bolt-in and Snap-in Mounting for Ω 1 Ω Fuses Construction: Blocks are molded flame retarded thermoplastic. Clips are spring-bronze. Voltage Rating: 300V Agency Information: UL Recognized ; File E14853A, Guide IZLT2 CSA Certified Class , File Anti-Rotation Pin: Single pole blocks may be ordered without the antirotational pin simply by adding an X to the number of poles (Example: BK/S X). Carton Quantity: 10; shelf package: 100. Bulk Carton: Single-pole and 2-pole fuse blocks 1,000; Multiple-pole fuse blocks 3-8 pole: 200; 9-12 pole: 50. When ordering bulk quantities, prefix BK/ to catalog number: (Example: BK/S SNP). Bolt-in Mounting Basic Poles Series Terminal Angle Cat. No. Amperes (Suffix) 8000 Solder 0 S UL 25A 40 S CSA 21A 8100 Ω Quick 0 S UL 20A Connect 40 S CSA 13A S Ω Quick UL 20A 40 S Connect CSA 16A Side S Screw S UL 30A CSA 25A Snap-in Mounting Poles Series Terminal Angle Cat. No. Amperes (Suffix) 8000 Solder Catalog Code BK/ S Prefix for Bulk Packing Series 8000 Product Line Type Terminal 0 -Solder 1 - Ω Quick Connect 2 - Ω Quick Connect 3 - Screw Terminal Angle 01 - straight (0,) side* Number of Poles (1-12) *Available only in single pole 0 S SNP UL 25A 40 S SNP CSA 21A Ω Quick 0 S SNP UL 20A Connect 40 S SNP CSA 13A Ω Quick 0 S SNP UL 20A Connect Side S SNP CSA 16A Available only in single pole CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. Ω 1 Ω Single Pole (6.4mm 31.8mm) Bakelite base; spring-bronze, bright tin-lead plate clips; 30A, 250V; base width Ω (12.7mm). No Solder Terminals. Integral terminal and clip. 0.69" (17.5mm) 0.27" (6.7mm) No. 4406Side Solder Terminal No. 4574Spare Fuseblock 0.27" 0.69" (6.7mm) (17.5mm) 2.31" (58.7mm) 1.63" (41.3mm) 1.63" (41.3mm) No. 2499Side Quick-Connect Terminals. Ω (6.4mm); 15A, 250V. UL Recognized, Guide IZLT2, File E " (18.3mm) 0.27" (6.7mm) 1.63" (41.3mm) 0.75" (19.1mm) 0.5" (12.7mm) NoteMounting screw hole diameter is (3.7mm). Counterbore diameter, (8.0mm). Max. Mounting Screw No Data Sheet:

10 Fuseblocks, Holders and Terminal Blocks Modular Fuseholders CH Series Features: Dovetail design provides maximum flexibility in assembling multiple poles Touchsafe design - No exposed contacts DIN rail mount (35mm) Optional open fuse indication lights Excellent for switchboard panel, control consoles, small motors, transformers, and similar applications Handle/fusepuller to install and remove fuses easily Available in single and multi-pole configurations Circuit marking system (P/N CH10CL and CH10CM) Wire ready: Saves time as terminals are ready to accept wires. CE marking Standards: North American Class CC Listed UL 512, Guide IZLT, File E14853 Certified CSA Std. C22.2 No. 39, Class , File LR47235 North American Midget Ω x 1 Ω UL Recognized 512, Guide IZLT2, File E14853 CSA Certified, Std. C22.2 No. 39, Class , File LR47235 European IEC IEC UL Recognized, CSA Certified*** IEC UL Recognized, CSA Certified*** Recommended Buss Fuse Types: North American Class CC Fuses - LP-CC, FNQ-R, KTK-R North American Midget Fuses - FNQ, KTK, AGU, KLM, BAF, BAN, FNM, FWA, FWC, & FNQ European Fuses - C10M, C10G Fuses - FWX, FWH, FWP, NON, C14M, C14G Fuses - FWP, C22M, C22G Specifications Fuse Size (mm) Voltage UL/CSA 600V 750V*** 750V*** IEC 690V 660V 660V Amperage UL/CSA 30A 30A*** 50A*** IEC 32A (See Watts Loss) 50A (See Watts Loss) 125A (See Watts Loss) Wire Size #8 - #18 CU only #6 - #14 CU only #1 - #14 CU only Wire Type (& Temp.) Solid/Stranded (75 ) Solid/Stranded (75 ) Solid/Stranded (75 ) Torque (in-lbs) 12 in-lbs 17.7 in-lbs 22.1 in-lbs IP Rating IP 20 IP 20 IP 20 Contact Material (fuseclip) Tin-plated copper Tin-plated copper Tin-plated copper Connector Material Steel Steel Steel Maximum Watts Loss of Fuse 3W 5W 9.5W Dual Wire Rating Please consult factory A, 600V 30A, 600V 32A, 690V North American North American European Class CC Midget Description Fuseholder Fuseholder Fuseholder 1 Pole CHCC1 CHM1 CH101 1 Pole w/indication CHCC1I CHM1I CH101I 2 Pole CHCC2 CHM2 CH102 2 Pole w/indication CHCC2I CHM2I CH102I 3 Pole CHCC3 CHM3 CH103 3 Pole w/indication CHCC3I CHM3I CH103I *Assembly Pins - 2 Poles CH102AP CH102AP CH102AP *Assembly Pins - 3 Poles CH103AP CH103AP CH103AP **Circuit markers CH10CM CH10CM CH10CM **Circuit marker labels CH10CL CH10CL CH10CL Spare Fuseholder 5TPH 5TPH 5TPH Refer to Data Sheets , , and for watts loss of applicable fuses. *CH102AP and CH103AP are packaged in quantities of ten pins. One pin is required to gang units together, and rating multiple poles. **CH10CM are packaged in quantities of ten. CH10CL are packaged in quantities of ten sheets of labels. ***UL/CSA part numbers include U.L. suffix. (i.e. -14x51 with UL rating is CH141GUL for a single pole device) Description Part No. Ctn. Qty. Part No. Ctn. Qty. 1 Pole CH141G 6 CH221G 6 1 Pole w/ul markings CH141GUL 6 CH221GUL 6 1 Pole w/microswitch CH141MSG 6 CH221MSG 6 2 Pole CH142G 3 CH222G 3 3 Pole CH143G 2 CH223G 2 3 Pole w/microswitch CH143MSG 2 CH223MSG 2 Handle Profile - 2 Poles CH142HCG 10 CH222HCG 10 Handle Profile - 3 Poles CH143HCG 10 CH223HCG 10 Data Sheet:

11 Electronic - PC Board and Small Dimension Fuses In-Line Fuse and Fuseholders GLR Fast Acting, Non-rejecting Voltage Rating: 300Vac or less Interrupting Rating: 10,000A UL Listed, 0-15A/300Vac (Guide JDYX, File E19180) CSA Certified, 0-10A/300V (Class , File 53787) Electrical Ratings for Type GLR Fuses and Non-Rejection Style Carriers Fuse Carrier 1, 2 Fuse Carrier 1, 2 GLR- Ω HLR GLR-5 HLR GLR- Ω HLR GLR-6 HLR GLR-1 HLR GLR-7 HLR GLR-1 Ω HLR GLR-8 HLR GLR-1flΩ º HLR GLR-9 HLR GLR-2 HLR GLR-10 HLR GLR-3 HLR GLR-12 HLR GLR-4 HLR GLR-15 HLR-2A 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to *For two leads order HLR-2A, 15A, 300V An alternative to the HLR fuseholder is the A fuseholder. The A fuseholder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class , File Do not put tension on line (rear) terminal of fuseholder. ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. Data Sheet: 2032 Data Sheet: 2031 GLQ Fast-Acting, Size Rejecting Voltage Rating: 300Vac or less Interrupting Rating: 10,000A UL Listed (Guide JDYX, File E19180) CSA Certified, (Class , File 53787) Electrical Ratings for Type GLQ Fuses and Rejection Style Carriers Fuse Carrier 3, 4 Fuse Carrier 3, 4 GLQ-1 HLQ-1flΩ º GLQ-3 HLQ-3 Ω º GLQ-1 Ω HLQ-1flΩ º GLQ-4 HLQ-5 GLQ-1flΩ º HLQ-1flΩ º GLQ-5 HLQ-5 GLQ-2 HLQ-3 Ω º GLQ-9 HLQ-10 GLQ-2 Ω HLQ-3 Ω º GLQ-10 HLQ-10 3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to Do not put tension on line (rear) terminal of fuseholder. *HLR Fuseholder HLQ 3 Fuseholder GMF and GRF Time Delay, Non-rejecting Voltage Rating: 300Vac or less Interrupting Rating: 10,000A 0-10A, UL Listed (Guide JDYX, File E19180) CSA Certified, (Class , File 53787) Electrical Ratings for Type GMF and GRF Fuses and Non-Rejection Style Carriers Fuse Carrier 1, 2 Fuse Carrier 1, 2 GMF- Ω º HLR GMF-3 HLR GMF- Ω HLR GMF-3 Ω º HLR GMF-flΩ º HLR GMF-4 HLR GMF- Ω º HLR GMF-5* HLR GMF-1 HLR GMF-6 Ω HLR GMF-1 Ω HLR GMF-10 HLR GMF-1flΩ º HLR GRF-7 HLR GMF-2 HLR GRF-8 HLR GMF-2 Ω HLR GRF-10 HLR GMF-2 Ω º HLR 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to *For two leads order HLR-2A, 15A, 300V An alternative to the HLR fuseholder is the A fuseholder. The A fuseholder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class , File Do not put tension on line (rear) terminal of fuseholder. ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. GMQ Time-Delay, Size Rejecting Voltage Rating: 300Vac or less Interrupting Rating: 10,000A UL Listed (Guide JDYX, File E19180) CSA Certified, (Class , File 53787) Electrical Ratings for Type GMQ Fuses and Rejection Style Carriers Fuse Carrier 3, 4 Fuse Carrier 3, 4 GMQ- Ω HLQ- Ω GMQ-2 Ω HLQ-3 Ω º GMQ-flΩ º HLQ-1flΩ º GMQ-3 HLQ-3 Ω º GMQ- Ω º HLQ-1flΩ º GMQ-3 Ω º HLQ-3 Ω º GMQ-1 HLQ-1flΩ º GMQ-4 HLQ-5 GMQ-1 Ω HLQ-1flΩ º GMQ-6 HLQ-8 GMQ-1flΩ º HLQ-1flΩ º GMQ-6 Ω GMQ-2 HLQ-3 Ω º 3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to Do not put tension on line (rear) terminal of fuseholder. ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. Data Sheet: 2033 Data Sheet:

12 Electronic - PC Board and Small Dimension Fuses Pin Indication Type GBA and GLD Fast Acting Ω 1 Ω (3AG) (6.6mm 31.8mm) UL Listed, 0-5A/125Vac, 10,000 AIC, Guide JDYX, File E19180 UL Recognized, 6A/125Vac, 1000AIC 8-15A/50Vac/dc, 300 AIC Guide JDYX2, File E19180 CSA Certified: 0-5A/125Vac, 10,000 AIC Class , File General Information: Type GBA has a red pin for high visibility. Type GLD has an Albaloy-plated pin for positive, electrical signal circuit activation. GLD- Ω GLD-2 GLD-6 GLD- Ω GLD-3 GLD-10 GLD-1 GLD-4 GLD-12 GLD-1 Ω GLD-5 GLD-15 GBA- Ω GBA-2 GBA-8 GBA- Ω GBA-3 GBA-10 GBA-1 GBA-4 GBA-15 GBA-1 Ω CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. GBA-5 Data Sheet: 2012 MIC and MIN Fast Acting Ω 1 Ω (5AG) (10.3mm 38.1mm) MIC0-15A UL Listed, Guide JDYX, File E19180 MIN1-5A CSA Certified, Class , File General Information: Type MIN has a red pin for high visibility. Type MIC has a silver-plated pin for positive, electrical signal activation. CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. 250Vac 32V MIC-1 MIC-5 MIC-20 ( = 35A) ( = 200A) ( = 10kA) MIC-2 MIC-10 MIC-25 ( = 100A) ( = 200A) ( = 10kA) MIC-3 MIC-15 MIC-30 ( = 100A) ( = 750A) ( = 10kA) MIC - (1-15)UL Listed 125Vac / = 10kA 250Vac 32V MIN-1 MIN-5 MIN-20 ( = 35A) ( = 200A) ( = 10kA) MIN-2 MIN-10 MIN-25N ( = 100A) ( = 200A) ( = 10kA) MIN-3 MIN-15 MIN-30 ( = 100A) ( = 750A) ( = 10kA) Data Sheet: 2047 FNA Time-Delay Ω 1 Ω (10.3mm 38.1mm) UL Listed Ω º- Ω ºA, 35A@ 250V 10kA@ 125V 1-15A, 10kA@ 125V Guide JDYX, File CSA Certified, 0- Ω º A/250V, 1-10A/125V, Class , File General Information: Fuses above 10A have dual-tube construction. 250Vac * 125Vac 125Vac 125Vac FNA- Ω º FNA-1 FNA-3 FNA-9 FNA- Ω FNA- fiω ºº FNA- Ω º FNA- Ω FNA- Ω º CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at for more information. FNA-1 Ω FNA-1 Ω FNA-1 Ω º FNA-1 Ω 35A FNA-1flΩ º 10,000A FNA-3 Ω º FNA-3 Ω FNA-4 FNA-4 Ω FNA-5 10,000A FNA- Ω º FNA-1 Ω º FNA-5flΩ º FNA- Ω FNA-2 FNA-6 FNA-flΩ º FNA-2 Ω FNA-6 Ω FNA- Ω FNA-2 Ω FNA-7 FNA- Ω º FNA-2 Ω º FNA-8 *Interrupting rating of 10,000A at 125V. Interrupting rating of 1,000A at 32V. FNA-10 FNA-12 10,000A FNA Volts FNA-20 FNA-25 FNA-30 % 1kA@ 32V Data Sheet:

13 Electrical - Power Fuses Time-Delay Class G Fuses A (Length).41" (10.3mm) Fuse (Amps) (Length) SC- Ω to SC SC-25 to SC-35 to SC Fast Acting ( Ω -6A), Class G Time-Delay (7-60A), Class G Construction: Melamine Tube Ampere Ratings: Ω -60A Voltage Rating: Ω -20: 600Vac/170Vdc 25-60: 480Vac/300Vdc (only UL) Interrupting Rating: 100,000A RMS Sym., 10,000A dc Agency Information: Std , Class G, UL Listed, Guide JDDZ, File E4273 CSA Certified, Class , File SC- Ω SC-6 SC-25 SC-1 SC-7 SC-30 SC-1 Ω SC-8 SC-35 SC-2 SC-9 SC-40 SC-2 Ω SC-10 SC-45 SC-3 SC-12 SC-50 SC-4 SC-15 SC-60 SC-5 SC-20 Carton Quantity and Weight Ampere Carton Weight* Ratings Qty. Lbs. Kg. Ω *Weight per carton. Compact branch-circuit units with high interrupting rating and current limitation. With a 600 volt rating, they can be used in 120/208, 120/240 and 277/480 volt circuits. Length variations relative to case size make the rejection type fuses. SC fuses with ampere ratings above 6 amps have a degree of overload time-delay which permits them to pass temporary overloads. At 200% load, they have a minimum opening time of 12 seconds. Recommended fuseblocks/fuseholders for Class G Open fuseblocks - see page 64 Panel-mount fuseholders - see page 78 In-line fuseholders - see page 80 Data Sheet: 1024 (0-60) 20

14 Electrical - Power Fuses Ω 1 Ω Supplementary Fuses BBS Fast Acting Ω 1 Ω (10.3mm 35mm) Construction: Fibre Cartridge Interrupting Rating: 10,000A RMS Sym. Ampere Ratings: Ω º-30A Voltage Rating: 600Vac ( Ω º-5A), 250Vac (6-10A), 48Vac (12-30A) UL Listed, 0-5A/600V, Guide JDYX, File E19180 CSA Certified, 0-5A/600V, Class , File Vac 250Vac 48Vac BBS- Ω º BBS-6 BBS-12 BBS- Ω º BBS-7 BBS-15 BBS- Ω BBS-8 BBS-20 BBS- Ω º BBS-10 BBS-25 BBS- Ω BBS-30 BBS-flΩ º BBS- Ω BBS- Ω º BBS-1 BBS-1 Ω BBS-1flΩ º BBS-1 Ω º BBS-2 BBS-3 BBS-4 BBS-5 KTQ Fast Acting Ω 1 Ω (10.3mm 34.9mm) Construction: Fibre Cartridge Ampere Ratings: 1-6A Voltage Rating: 600Vac Interrupting Rating: 10,000A RMS Sym. UL Recognized, 4-6A, Guide JDYX2, File E Vac KTQ-1 KTQ-1flΩ º KTQ-2 KTQ-3 KTQ-4 KTQ-5 KTQ-6 Data Sheet: 2045 Data Sheet: 2010 (0-30A) Recommended fuseblocks/fuseholders for 13/32 x 1-1/2 fuses Open fuseblocks - see page 64, 66 Finger-safe fuseholders - see pages 41-44, 65 Panel-mount fuseholders - see page In-line fuseholders - see page