Fuse Blocks and Clips

Size: px

Start display at page:

Download "Fuse Blocks and Clips"

Lucy Lindsay Hodges
5 years ago
Views:

PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse.................................................................................................... 487 3G Screw Terminal.

1 PGE Fuse and lock s OMNI-LOK Fuse lock Midget Fuse G Screw Terminal s (Rivet/Eyelet Mount) s (PC) utomatic Insertion s

2 For 2G Fuses OMNI-LOK Fuse lock Molded ase Type This low profile Omni-lok Fuse lock design is available with a choice of solder type terminals, Q.C. terminals or P.C. board mountable terminals. The PC design is offered with either tin-plated brass terminals for normal applications or tin-plated beryllium copper terminals for use in caustic environments. These fuse blocks feature individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The unique design permits selfalignment of clips to fuse cap. This, plus a one-piece clip/terminal assures low contact resistance. Multiple pole units may be broken apart to obtain desired number of poles. PPROVLS: Recognized under the Components Program of Underwriters Laboratories and Certified by CS. SPECIFICTIONS: Electrical: Solder Type 10, 300V. Q.C. Type 10, 300V. PC Type 10, 300V. Dielectric Strength: 1500V., Minimum. /Terminals: Tin-Plated Spring rass, except pn is Tin-Plated eryllium Copper. ase: lack Thermoplastic, glass reinforced with UL 94V0 flammability rating. mbient Temperature: 40 C to +85 C. OPTIONS: 1. Other colors available on special order. Contact factory. 2. Two different style clips can be supplied for circuit identity or polarization. Contact factory. PTENTED Number Typical Solder Type Number Overall / Terminals of Poles Width () Terminals " rass " rass " rass " rass " rass " rass " rass " rass Typical NEM Style Number Overall /.110" Q.C. Terminals of Poles Width () Terminals " rass " rass " rass " rass " rass " rass " rass " rass Typical P.C. Number Overall / oard Mount of Poles Width () Terminals " rass " eryllium Copper Solder & Q.C. Types:.35" typ..50" typ..016" With 2G fuse installed.110" typ. P.C. oard Mount Type:.35".50".190" x.187" deep C bore with.050" material remaining.450" centers typ. 1.22".70".81".730" ±.005" Recommended Hole Pattern.70" typ ".53".04".090" DI. Thru Solder type terminals feature elongated hole on clip.19".050" DI. HOLES.055" (2 LOCTIONS) 484

3 For 5 x 20mm Fuses Metric OMNI-LOK Fuse lock Molded ase Type V D E The metric Omni-lok fuse block, for 5 x 20mm size fuses, is a low profile design that is available with a choice of solder type terminals, NEM style QC terminals, or PC board mountable terminals. Each of these designs has tin-plated brass terminals. unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance. n antirotation feature is also available on the solder and QC terminal designs. PPROVLS: Recognized under the Components Program of Underwriters Laboratories and Certified by CS. VDE and Semko approved. SPECIFICTIONS: Electrical: UL/CS VDE/Semko Solder Type 10, 300V. 6.3, 250V. Q.C. Type 10, 300V. 6.3, 250V. PC Type 10, 300V. 6.3, 250V. Dielectric Strength: 1500V., Minimum. /Terminals: Tin-Plated Spring rass. ase: Glass reinforced Thermoplastic, UL 94V0 flammability rating. Gray color (GY) for anti-rotational series, black color for all others. mbient Temperature: 40 C to +85 C. PTENTED SOLDER TERMINL TYPES: Typical Overall / nti-rotation Number Width Terminals oss Solder Type Terminals " rass No NEM Style.110" Q.C. Terminals " rass No GY.40" rass Yes PC oard Mount " rass No ".090" DI. THRU.07"x.13 HOLE ".92".54".016".40".50" P.C. MOUNT TYPE Q.C. TERMINL TYPES: " FUSE LOCKS ND CLIPS.090" DI. THRU 1.44" " 45.54".016".50".03" STNDOFF 1.03" WITH 520mm FUSE INSTLLED.40".18" GY.92" 1.44".40".950 ± ".055" TYP ".016".50" RECOMMENDED HOLE PTTERN.040 DI..428".92".40" 485

4 For 3G Fuses 3G OMNI-LOK Molded ase Type Fuse lock low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The unique design permits self-alignment of clips to fuse cap. This, plus a one-piece clip/terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips. With the exception of the two-pole unit, multiple pole units may be broken apart to obtain desired number of poles. PPROVLS: Recognized under the Components Program of Underwriters Laboratories and Certified by CS up to 300V and at current ratings shown below. Current Rating Series U.L. CS GY SPECIFICTIONS: Dielectric Strength: 1500V., Minimum. /Terminals: Tin-Plated Spring rass. ase: Glass reinforced Thermoplastic. (Gray except nti-rotation series which is lack). UL 94V0 flammability rating. mbient Temperature: 40 C to +85 C. ELECTRICL SPECIFICTIONS: Series or Number Terminals Rating Solder 30, 300V* /16" Q.C. 20, 300V /4" Q.C. 20, 300V /4" QC. 30, 300V GY P.C. oard 15, 300V *30 amp capability is based on temperature rise with #10 WG wire properly soldered..312" DI. C ORE.06" DEEP (.10 REMINS) 1.4" 2.19".6" DI. THRU.625" TYP..08".25" TYP. P.C. oard Type (Single pole units only) 1.46" 1.4".08" DI..10" DI..156" DI..65".53" OPTION: Two different style clips can be supplied for circuit identity or polarization. Contact factory. PTENTED.06" DI. (2) nti-rotation oss (Single pole units only).55" M. 45 Number NEM Style NEM Style Number Reference Solder Type 3 /16" Q.C. 1 /4" Q.C. 1 /4" Q.C. of Dimension Terminals Terminals Terminals Terminals Poles GY GY GY GY 1.50" GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " GY GY GY GY " L* L* L* L* 1.50" GY 1.50" *With nti-rotation oss 486

5 For 1 1 / 2 or 1 3 / 8 Inch Long Midget Fuses 600 Volt Molded ase Type U L Space-saving, 600 volt, molded base fuse blocks with side barriers for isolation. For use with 13/32" x 1 1 /2" or 13/32" x 1 3 /8"midget fuses. y sliding and locking blocks together, any number of poles can be achieved. Class CC fuses have a rejection feature on one end cap which mates with the rejection feature of Littelfuse Class CC fuse blocks and fuseholders to prevent the installation of fuses with lower voltage ratings or interrupting ratings. GENCY PPROVLS: Midget locks: Recognized under the Components Program of Underwriters Laboratories. Certified by CS. Class CC locks: UL Listed. Certified by CS. SPECIFICTIONS: Electrical: Screw terminal, pressure plate terminal, and box lug terminals rated for 30 amperes. Q.C. terminals rated for 20 amperes. Dielectric Strength: 1200V Minimum. /Terminals: Tin-Plated Copper lloy. ox Lug: Copper. Screws and Captive Pressure Plate: Zinc-Plated Steel. Reinforcing Spring: Stainless Steel. Contact factory for availability. ase: Thermoplastic. UL 94V0 flammability rating. mbient Temperature: 105 C Maximum. PTENTED DIMENSIONS: Class CC Rejection Feature.495" Fuse 3.00" Guide Spring.650".600".172".750" 1.490".100" 1.250" REF. Screw with Pressure Plate (P) Screw (S).783" REF. ox Lug (C) Gang Mountable Fuse blocks interlock to form desired number of poles.172".576".484 ".670" 1.360" Installation of #FDIN1 DIN Rail dapter to fuse block permits assemblies to be snapped to 32mm asymmetrical or 35mm symmetrical ( hat type) DIN rails..770" FUSE LOCKS ND CLIPS Number Number of Maximum Midget Class CC Poles Connector Type Wire Size L60030M-1C L60030C-1C 1 Copper ox Lug L60030M-2C L60030C-2C 2 Copper ox Lug # 6 CU L60030M-3C L60030C-3C 3 Copper ox Lug L60030M-1SQ L60030C-1SQ 1 Screw/Q.C. Terminal L60030M-2SQ L60030C-2SQ 2 Screw/Q.C. Terminal #10 CU L60030M-3SQ L60030C-3SQ 3 Screw/Q.C. Terminal L60030M-1PQ L60030C-1PQ 1 Pressure Plate/Q.C. Terminal L60030M-2PQ L60030C-2PQ 2 Pressure Plate/Q.C. Terminal #10 CU L60030M-3PQ L60030C-3PQ 3 Pressure Plate/Q.C. Terminal DIN Rail dapter: Part No. FDIN1. 487

For 3G Fuses 3G Screw Terminal Laminated ase Type PPROVLS: 1 356 000 Series (250V) Recognized under the Components Program of Underwriters Laboratories.

359 000 Series: Silver-plated beryllium copper. Terminals: 8-32THD screw type. ase: lack phenolic laminate. Mounting Hole: 3G lock: Reference Dimensions.2"/.7" diameter with.295"/.302" x 82 C.S. REFERENCE DIMENSIONS: Fuse Type C D E 3G See 2.

6 For 3G Fuses 3G Screw Terminal Laminated ase Type PPROVLS: Series (250V) Recognized under the Components Program of Underwriters Laboratories. SPECIFICTIONS: Electrical: Rated for currents up to 15 amperes (units with spring brass clips) or up to 30 amperes (beryllium copper clips). s: Series: Nickel-plated spring brass Series: Silver-plated beryllium copper. Terminals: 8-32THD screw type. ase: lack phenolic laminate. Mounting Hole: 3G lock: Reference Dimensions.2"/.7" diameter with.295"/.302" x 82 C.S. REFERENCE DIMENSIONS: Fuse Type C D E 3G See 2.38".25".91".73" (Including Reference Dimensions) For 3G Fuses No. of Dimension Poles Number 1.78" " " " " " " " " " " " ONE POLE D C = oard Thickness E = Overall Height , and Series For 1 /4" 13 /16" Diameter Fuses Rivet/Eyelet Mount Type Earless (without fuse stops) H, HOLE DI. Ear (with fuse stops) H, HOLE DI. D D C C See Ordering Information below. For 1 /4" Diameter Fuses Rivet/Eyelet Mount Solder Type H, HOLE DI. Straight Type, Solder Lug 45 ngle Type, Solder Lug D.09".16" HOLE C Number Spring rass eryllium Copper Fuse Style Fuse Type Nickel-plated Silver-plated Diameter C D H Diameter Ear 3G /4".48".31".30".16".131" Midget /32".75".44".52".22".196" NEC 1 30 amp /16". 94".59".65".25".203" NEC amp ** /16" 1.31".75".87".30".265" Earless 3G /4".48".31".30".16".131" Midget /32".75".44".52".22".196" NEC 1 30 amp /16".94".59".65".25".203" NEC amp ** /16" 1.31".75".87".30".265" Solder Lug 45 3G * /4".47".56".31".16".131" Solder Lug Straight 3G * 1/4".47".64".31".16".131" *Tin-plated **are Phos. ronze 488

For 1 /4 Diameter Fuses Traditional P.C. oard Type.28".

Copper Silver-plated Earless 122 088 eryllium Copper Tin-plated Ear 122 093 eryllium Copper Tin-plated Earless Nominal Length Fuse Length 5/8.750 3/4.875 7/8 1.000 1 1.125 1 1 /16 1.187 1 1 /4 1.

132" DI. HOLE.125".31".33".06".25".42" Nominal Length Fuse Length 5/8.750 3/4.875 7/8 1.000 1 1.125 1 1 /16 1.187 1 1 /4 1.347 1 7 /16 1.562.28".37".300" (2 PL.).08".165".100" DI.

7 For 1 /4 Diameter Fuses Traditional P.C. oard Type.28".31" Number Material* Finish Style Spring rass Tin-plated Ear Spring rass Tin-plated Earless Spring rass Hot Tin Ear eryllium Copper Silver-plated Ear eryllium Copper Silver-plated Earless eryllium Copper Tin-plated Ear eryllium Copper Tin-plated Earless Nominal Length Fuse Length 5/ / / / / / ".42".".27".06".300" (2 PL.).03"R.078" DI. 4 HOLES RECOMMENDED MOUNTING PTTERN owed Tab P.C. oard Type Number Material* Finish Style Spring rass Tin-plated Earless Spring rass Tin-plated Ear.132" DI. HOLE.125".31".33".06".25".42" Nominal Length Fuse Length 5/ / / / / / ".37".300" (2 PL.).08".165".100" DI. 4 HOLES RECOMMENDED MOUNTING PTTERN Low Profile P.C. oard Type Number Material* Finish Style Spring rass Tin-plated Ear eryllium Copper Silver-plated Ear Nominal Length Fuse Length 5/ / / / / / ".28".21".11".300" (2 PL.).30".06".070" DI. 4 HOLES RECOMMENDED MOUNTING PTTERN FUSE LOCKS ND CLIPS Low Profile P.C. oard Type Number Material* Finish Style Spring rass Tin-plated Ear *NOTE: Spring brass clips are suitable for current levels up to 15 amperes; beryllium copper clips up to 30 amperes..28".04".125".03".23".19".192" Nominal Length Fuse Length / / ".200".052" DI. 4 HOLES RECOMMENDED MOUNTING PTTERN 489

For Various Diameter Fuses TO Fuse P.C. oard Type Number Material* Finish 100 057 Spring rass Tin-plated NOTE: #100 057 spring brass, tin-plated clips available for printed circuit board mounting.

oard Type RECOMMENDED MOUNTING PTTERN Number Material Finish Style 111 501 Spring rass Tin-plated Ear 111 506 eryllium Copper Tin-plated Ear 111 505 eryllium Copper Tin-plated Surface Mount NOTE:

8 (.15") 3.5 (.").76 (.03") Table 1 Dim. 2G 12.7 (.50") 5x20 17.8 (.70") 5 (.197") For 5mm Diameter Fuses P.C. oard Type 1.17 (.046") DI.

8 For Various Diameter Fuses TO Fuse P.C. oard Type Number Material* Finish Spring rass Tin-plated NOTE: # spring brass, tin-plated clips available for printed circuit board mounting. Suitable for current levels up to 15 amperes. First time fuse insertion force may approach 40 lbs..135" M..28".44".06".27".12".167".200".200".096" DI. HOLES (4) For 2G or 5mm Diameter Fuses P.C. oard Type RECOMMENDED MOUNTING PTTERN Number Material Finish Style Spring rass Tin-plated Ear eryllium Copper Tin-plated Ear eryllium Copper Tin-plated Surface Mount NOTE: Suitable for current levels up to 10 amperes. NOTE: Metric dimensions are shown. Inch dimensions are in parentheses. 2.0 (.08") 2.0 (.08") 7.1 (.28") 1.8 (.07") 1.1 (.043") 4.8 (.19") 5.1 (.20") 3.8 (.15") 3.5 (.").76 (.03") Table 1 Dim. 2G 12.7 (.50") 5x (.70") 5 (.197") For 5mm Diameter Fuses P.C. oard Type 1.17 (.046") DI. 4 HOLES RECOMMENDED MOUNTING PTTERN Number Material Finish Style Spring rass Silver-plated Ear Spring rass Tin-plated Ear NOTE: Spring brass clips are suitable for current levels up to 10 amperes. NOTE: Metric dimensions are shown. Inch dimensions are in parentheses. Fuse Size Dim. 5mm x 20mm 20.5 (.807") 5mm x 25mm 25.5 (1.004") 5mm x 30mm 31.0 (1.220") 4.5 (.18") 8.2 (.32") 5.6 (.22") 4.1 (.16") 5.0 (.197") 5.9 (.23") 10.7 (.42") 1.2 (.047") 3.5 (.") For 5mm Diameter Fuses P.C. oard Type Number Material Finish Style Spring rass Tin-plated Ear Spring rass Nickel-plated Ear Spring rass Silver-plated Ear NOTE: Spring brass clips are suitable for current levels up to 10 amperes. Fuse Size Dim. 5mm x 20mm 20.5 (.807") 5mm x 25mm 25.5 (1.004") 5mm x 30mm 31.0 (1.220") 1.3 (.051") DI. 4 HOLES RECOMMENDED MOUNTING PTTERN 5.5 (.217") 4.5 (.177") Max 6.2 (.244") 8 (.315") 5.0 (.197") 10.4 (.409") 1.2 (.047") 1.3 (.051") DI. 4 HOLES RECOMMENDED MOUNTING PTTERN 490

For 5mm Diameter Fuses utomatic Insertion Type Number Material Finish Style 0111 0005MR Phosphor Tin-plated Ear ronze mmo Pack 1000 Pcs. 1mm (.039") 2.6mm (.102") 2.1mm (.083") 7.8mm (.307") 4.7mm (.

039") 6mm (.236") 1.3mm (.051") 20mm (.787") 5mm (.197") 1.05mm (.041") DI.

9 For 5mm Diameter Fuses utomatic Insertion Type Number Material Finish Style MR Phosphor Tin-plated Ear ronze mmo Pack 1000 Pcs. 1mm (.039") 2.6mm (.102") 2.1mm (.083") 7.8mm (.307") 4.7mm (.185") 3mm (.118") 5.3mm (.209") 18mm (.709") 9mm (.354") 6.35mm (.250") 12.7mm (.500") 0.6mm (.024") 5mm (.197") 12.7mm (.50") 1mm (.039") 0.5mm 16mm (.020") (.630") 18mm (.709") 4mm (.157") 1mm (.039") 6mm (.236") 1.3mm (.051") 20mm (.787") 5mm (.197") 1.05mm (.041") DI. 4 HOLES PC MOUNTING HOLE SPECIPCTION NOTE: # phosphor bronze, tin-plated clips designed for automatic insertion are suitable for current levels up to 10 amperes. For Midget Fuses (13/32") PC oard Mount ELECTRICL SPECIFICTIONS: 15 at 250VC 18.7 (.736") 22.2 (.874") 2.1 (.083") / (.136") 11.4 (.449") ± (.028 ±.0002") 12.4 (.488") 11.1 (.437") mp Voltage Number Material Finish Style Rating Rating Spring rass Tin-plated Ear VC eryllium Copper Tin-plated Ear VC FUSE LOCKS ND CLIPS 491

10 Notes and Drawings 492

151

151 C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE