Wire connection products

Transcription

1 Wire connection products Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks N512-BK 12-Pole block NFT2-WH 2-Pole block NFT3-3-pole block NC3-WH 3-Pole block NSE3-WH 3-Pole block NSS3-WH 3-Pole block Rail mount disconnect terminal blocks Series 3- and 4-Pole blocks Series 3-Pole block Sectional terminal blocks PLU3-3-Pole block PLU1-WH 1- to 3-Pole block PSU1-WH 1- to 3-Pole block KT3-WH 3-Pole block KT4-WH 4-Pole block PLK-3 3-Pole block Quick-connect terminal blocks NTQ23-WH 3-Pole block BNQ21-WH 1-Pole block BQQ41-WH 1-Pole block Double row terminal blocks Series TB to 36-Pole blocks Series TB200 & TB200HB 2- to 30-Pole blocks Series TB300 & TB to 24-Pole blocks Marking options and covers for double row series Top & bottom marking strips for double row terminal blocks Series TB to 12-Pole double row terminal blocks Series KU 2- to 12-Pole base mount double row terminal blocks Series TS finger-safe terminal blocks 2- to 12-Pole standard base to 12-Pole flat base to 12-Pole raised base Wire Management Products RED indicates NEW information 281

2 Rail mount terminal blocks NDN Series Description: High-density, snap-on 35mm DIN rail compatible rail mount terminal blocks. Construction: Unique, impact resistant, one-piece thermoplastic moldings. Heat treated stainless steel collars (to secure wires). Tin-plated copper alloy terminals. Zinc-plated steel screws. Circuits Per Foot: Up to 48 circuits per foot. Flammability Rating: UL 94V2 NDNV4- (color) Description: Rail mount terminal block. Center Spacing: 0.250" (6.35). Circuit Jumper: JN4, 4 circuits. Screw Size: #6-32. Poles: 4 Circuits Per Foot: 48 Wire Range: WG #10-22 CU. mps: 0-30 Marking Tape: MTC6. Torque Rating: 18 in-lb max. Mounting Options: 35mm DIN rail, C-rail. NDN3- (color) Description: Rail mount Center Spacing: 0.300" (7.62). Circuit Jumper: JNDN3, 2 circuits. Screw Size: #6-32. Poles: 3 Circuits Per Foot: 38 Wire Range: WG #10-22 CU. mps: 0-30 (field wiring) 0-30 (factory wiring) E62622; CS LR Flammability Rating: UL 94V2 Torque Rating: 18 in-lb max. Mounting Options: 35mm DIN rail, C-rail. NDN63- (color) Description: Rail mount terminal block. Center Spacing: 0.375" (9.52). Circuit Jumper: JN3, 2 circuits. Screw Size: # Poles: 3 Circuits Per Foot: 30 Wire Range: WG #6-18 CU. mps: 0-65 Flammability Rating: UL 94V2 Torque Rating: 35 in-lb max. Mounting Options: 35mm DIN rail, C-rail. Numbers Numbers NDNV4-WH NDNV4-BK Colors WH - White (Standard) BK - Black Numbers Numbers NDN3-WH NDN3-BK Colors WH - White (Standard) BK - Black Numbers Numbers Colors NDN63-WH WH - White (Standard) NDN63-BK BK - Black 282

3 Rail mount terminal blocks NDN1-WH Description: Rail mount Center Spacing: 0.635" (16.13mm). Circuit Jumper: JN1, 2 circuits. Screw Size: Poles: 1 Circuits Per Foot: 18 Wire Range: WG #2-18 CU. mps: 0-90 Torque Rating: 32 in-lb max. Mounting Options: 35mm DIN rail,c-rail (Dove-tail option is available for mounting side-by-side. Order part no. NDN1-WH). Numbers Number NDN1-WH Color White NDN111- (color) Description: Rail mount terminal block. Center Spacing: 0.635" (16.13mm). Circuit Jumper: JN1, 2 circuits. Screw Size: Poles: 3 Circuits Per Foot: 18 Wire Range: WG #2-18 CU. mps: 0-90 Torque Rating: 32 in-lb max. Mounting Options: 35mm DIN rail, C-rail, Base Mount. (Dove tail option is available for mounting side-by-side. Order part no. NDN111-WH). Numbers Numbers NDN111-WH NDN111-BK NDN111-WH NDN111-BK Colors White (Standard) Black White Black (Standard) Wire Management Products NDN Series Terminal Block ccessories NDN NDNS NFT NR SO72 MRKING JUMPERS 35mm DIN rail 35mm DIN rail C-rail C-rail 72 long TPE See series luminum End Stop luminum Low profile Stand-Off Channel See series specifications NDN meter NFT36 No flange for C-rail specifications NDN meters 36 long luminum NFT " length 72 long 283

4 Rail mount terminal blocks N512-BK Description: Rail mount terminal block. Center Spacing: 0.197" (5.00). Circuit Jumper: JN512, 12 circuits. Screw Size: #4-48. Poles: 12 Circuits Per Foot: 60 Wire Range: WG #12-22 CU. Volts: 300V (20) 600V (5) mps: 20 (300V) 5 (600V) Flammability Rating: UL 94V2 Marking Tape: T512. Torque Rating: 12 in-lb max. Mounting Options:C-rail, 15mm DIN rail. Numbers Number N512-BK Color Black NFT2-WH Description: Rail mount Center Spacing: 0.281" (7.13). Circuit Jumper: JN2, 2 circuits. Screw Size: #8-32. Poles: 2 Circuits Per Foot: 38 Wire Range: WG #8-22 CU. mps: (factory wired) Torque Rating: 18 in-lb max. Mounting Options: C-rail. Numbers Numbers NFT2-WH Colors White NFT3- (color) Description: Rail mount Center Spacing: 0.390" (9.91). Circuit Jumper: JN3, 2 circuits. Screw Size: #8-32. Poles: 3 Circuits Per Foot: 28 Wire Range: WG #8-22 CU. mps: (factory wired) Torque Rating: 18 in-lb max. Mounting Options: C-rail. Numbers Numbers NFT3-WH NFT3-BK Colors White (Standard) Black Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 2.40 (60.96).60 (15.44).07 (1.78) 1.29 (32.94).93 (23.80).36 (9.14) 1.18 (29.97) 1.29 (32.94).88 (22.35) 1.68 (42.82) 1.23 (31.34) 1.23 (31.37) 1.09 (27.68).65 (16.51) 284

5 Rail mount terminal blocks NC3-WH NSE3-WH NSS3-WH Description: Rail mount Description: Rail mount Description: Rail mount terminal block. Center Spacing: 1.06" (26.92). Circuit Jumper: JN3, 2 circuits. Screw Size: Poles: 3 Circuits Per Foot: 11 Wire Range: 2/0-#14 CU/L. mps: 175 Center Spacing: 1.06" (26.92). Circuit Jumper: JN3, 2 circuits. Screw Size: Poles: 3 Circuits Per Foot: 11 Wire Range: For use with wire crimped to ring terminal. mps: 115 Center Spacing: 0.385" (9.77). Circuit Jumper: JNSS3, 2 circuits. Screw Size: #6-32. Poles: 3 Circuits Per Foot: 28 Wire Range: For use with wire crimped to ring terminal. mps: 30 Torque Rating: 45 in-lb max. Mounting Options: C-rail, base mount. Mounting Options: C-rail, base mount. Mounting Options: C-rail. Numbers Numbers Number NC3-WH Color White Numbers Number NSE3-WH Color White Number NSS3-WH Color White Wire Management Products Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 3.12 (79.38) 1.75 (44.45).250 x.190 mtg. slots 1.24 (31.50) 1.75 (44.45) 1.75 (44.45).250 x.190" mtg. slots 1.53 (38.86) 3.12 (79.24) 1.32 (33.73) 285

6 Rail mount disconnect terminal blocks Series Description: Disconnect terminal blocks for 35mm DIN rail mount. mps: 30* Center Spacing: (9.52mm). Wire Range: #12-16 GW CU. Screw Size: #6-32 zinc-plated philslot. Poles: 3- and 4-pole only. Mounting: 35mm DIN Rail. Optional End Stop NDNS Jumpers: 2- through 4-pole available. Construction: Molded thermoplastic base, tin-plated copper alloy contacts. Torque Rating: 12 in-lb. Operating Temperature: 105 C. gency Information: UL/CS; CE Certified. Flammability Rating: UL 94V0. * 30 rating achieved with #10WG wire crimped to ring terminal; 25 without. Number Build--Code Series Poles Wiring Optional End Stop to 4 Blank - Inline S - Locking snap R - Reverse Dimensions - in(mm) In-Line Wiring Direction Series Description: Disconnect terminal blocks for 35mm DIN rail mount. Rating: * mps: 65 Center Spacing: 0.54 (13.7mm). Wire Range: #6-16 WG. Screw Size: #8-32 zinc-plated philslot. Poles: 3-pole only. Mounting: 35mm DIN Rail. Optional End Stop NDNS (shown on pg. XX) Construction: Molded thermoplastic base, tin-plated copper alloy contacts. Torque Rating: 20 in-lb (30 in-lb for 8 WG bare wire). Operating Temperature: 105 C (221 F). gency Information: UL/CS E62622; CE Certified. *CS rating achieved with #6 WG wire crimped to ring terminal 50 without. Number Build--Code Series Wiring Options Blank - Inline S - Snap R - Reverse ST - Screw together SS - Solid DIN rail snap Dimensions - in(mm) Reverse Wiring Direction 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) 1.94 (49.27) 1.70 (43.2) 2.30 (58.4) for ST option 0.54 (13.7) 1.94 (49.27) Reverse Wiring Direction 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) (9.52) 0.22 (5.58) In-Line Wiring Direction 1.70 (43.2) 1.94 (49.27) 1.94 (49.27) 286

7 Sectional terminal blocks PLU3- (color) Description: Depluggable rail mount sectional Center Spacing: 0.390" (9.91). Circuit Jumper: JN3, 2 circuits. Screw Size: #8-32. Poles: 3 Circuits Per Foot: 28 Wire Range: WG #8-22 CU. mps: 40 Torque Rating: 18 in-lb max. Mounting Options: C-rail, stackable. Numbers Numbers PLU3-WH PLU3-BK Colors White (Standard) Black PLU1-WH Description: Depluggable rail mount sectional Center Spacing: 0.625" (15.88). Circuit Jumper: JN1, 2 circuits. Screw Size: Poles: 1- to 3-Poles. Circuits Per Foot: 19 Wire Range: WG #4-18 CU. mps: 70 Torque Rating: 32 in-lb max. Mounting Options: C-rail, stackable. Numbers Numbers Poles Colors PLU1-WH 1 White PLU11-WH 2 White PLU111-WH 3 White PSU1-WH Description: Depluggable rail mount sectional Center Spacing: 0.625" (15.88). Circuit Jumper: JN1, 2 circuits. Screw Size: # Poles: 1- to 3-Poles. Circuits Per Foot: 19 Wire Range: For use with crimp on connectors only. mps: 45* *45 rating achieved with ring terminal crimped to wire. Torque Rating: 32 in-lb max. Mounting Options: C-rail, stackable. Numbers Numbers Poles Colors PSU1-WH 1 White PSU11-WH 2 White PSU111-WH 3 White Wire Management Products Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 1.87 (47.49) 1.85 (46.99) 1.48 (37.59).625 (15.88) 1.93 (49.12) 1.48 (37.64) 0.59 (14.98) 1.79 (45.64) 1.85 (46.99) 2.44 (62.10) 0.43 (11.10) 1.30 (33.00) 287

8 Sectional terminal blocks KT3-WH Description: Depluggable rail mount sectional Center Spacing: 0.390" (9.91). Circuit Jumper: JN3, 2 circuits. Screw Size: #8-32. Poles: 3 Circuits Per Foot: 28 Wire Range: WG #8-22 CU. mps: 40 Torque Rating: 18 in-lb max. Mounting Options: Base mount, stackable. KD end mount adapter optional. Numbers Number Color KT3-WH White KT4-WH Description: Depluggable rail mount sectional Center Spacing: 0.250" (6.35). Circuit Jumper: JN4, 4 circuits. Screw Size: #6-32. Poles: 4 Circuits Per Foot: 48 Wire Range: WG #10-22 CU. mps: 30 Marking Tape: MTC6. Torque Rating: 18 in-lb max. Mounting Options: Base mount., Mounting screws recommended every 12 circuits. Numbers Number Color KT4-WH White PLK3- (color) Description: Depluggable rail mount sectional Center Spacing: 0.390" (9.91). Circuit Jumper: JN3, 2 circuits. Screw Size: #8-32. Poles: 3 Circuits Per Foot: 28 Wire Range: WG #8-22 CU. mps: 40 Torque Rating: 18 in-lb max. Mounting Options: Base mount, stackable. End Piece (Part No. KD) is required for mounting. Mounting screws recommended every 15 circuits. Numbers Number Color PLK3-WH White Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 1.87 (47.63) 0.25 (6.35) 0.98 (24.99) 0.37 (9.40) 1.46 (37.22) 0.56 (14.22) 1.22 (31.04) #8 screw clearance 0.62 (15.88) 1.26 (32.23) 1.79 (45.52) KD end mtg. adapter 1.84 (46.86) 2.34 (59.51) 1.34 (34.04) 288

9 Quick-connect terminal blocks NTQ23-WH BNQ21-WH BQQ41-WH Description: Quick connect Description: Quick connect terminal block. Description: Quick connect Center Spacing: 0.390" (9.91). Screw Size: #8-32. Poles: 3 Circuits Per Foot: 28 Wire Range: WG #8-22 CU. mps: 40 Torque Rating: 18 in-lb max. Mounting Options: C-rail. Numbers Number Color NTQ23-WH White Quick Connects: 0.250" X.031". Center Spacing: 0.437" (11.10). Screw Size: #8-32. Poles: 1 Circuits Per Foot: 24 Wire Range: WG #8-22 CU. mps: 40 Torque Rating: 18 in-lb max. Mounting Options: Base mount, stackable. End Piece (Cat. No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Numbers Number Color BNQ21-WH White Quick Connects: 0.250" x.031". Center Spacing: 0.437" (11.10). Screw Size: #8-32. Poles: 1 Circuits Per Foot: 24 Wire Range: For use with quick connect terminals only. mps: 30 Mounting Options: Base mount, stackable. End Piece (Cat. No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Numbers Number Color BQQ41-WH White Wire Management Products Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) #BQE (end mtg. adaptor) #8 mtg. screw #BQE (end mtg. adaptor) #8 mtg. screw ( B B 0.56 (14.28) 0.56 (14.28) 1.31 (33.32) 1.47 (37.33) 1.47 (37.33) 1.41 (35.81) 1.41 (35.81) 289

10 Double row terminal blocks Series TB100 Description: Double row terminal blocks. Volts: 300V* mps: 30* Center Spacing: or 3 8 (9.52mm). Wire Range: #14-22 WG CU. Screw Size: #6-32 philslot screws. Poles: 2 to 36. Torque Rating: 9 in-lb. Distance Between Barriers: 0.30 (7.62mm). Mounting: #6 screws. Operating Temperature: +130/-40 C (+266/-40 F). Construction: Molded, black thermoplastic base, tin-plated brass terminals with zinc-plated steel screws. Breakdown Voltage: 3600V. gency Information: UL/CS; IEC Compliance; CE Certified. Flammability Rating: UL 94V0. * Max rating shown; some options may be rated lower, consult Cooper Bussmann. TB TB100-04SP Dimensions - in Poles B Poles B Poles B TB100- in (mm) 0.14 (3.5) B 0.14 (3.5) = 25.4mm (7.9) 0.25 (6.3) 0.17 dia. (4.3) (9.5) 0.30 (7.6) 0.88 (22.3) 0.41 (10.4) Number Build--Code Series Poles Screw Options Marking Hardware Options TB to 36 Blank = Steel philslot, zinc-plated L1 to L6 (See page 296) QC1 to QC20 = Quick connects 00 = Screws shipped bulk Marker strips (See page 297) J101 = Flat slip-on jumper (2 position only) B = Brass philslot, nickel-plated Covers (See page 296) 0J2 = Over barrier jumpers BS = Brass Sems philslot, nickel-plated 0J4 = Over barrier jumpers SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) 290

11 Double row terminal blocks Screw Options B BS SP P ST STR Brass Philslot Brass SEMS Steel SEMS Steel (SEMS) Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot Phillips (recess) Hardware Options Quick Connects ssembled: Terminals x Maximum current rating 13 mps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Quick Connects Bulk: minimum order per part number 100 pieces. Wire Management Products QC101 QC102 QC103 Flat none QC 45 none QC 90 none QC104 QC105 QC106 QC107 QC108 QC109 Flat Flat Flat QC 45 Flat QC 90 QC 45 QC 45 QC 45 QC 90 QC 90 QC 90 Jumpers Bulk: minimum order per part number 100 pieces. Contact Cooper Bussmann for jumper assembly. J101 OJ2 OJ4 Flat slip-on Slip-on over barrier Closed over barrier 291

12 Double row terminal blocks Series TB200 & TB200HB Description: Double row terminal blocks. Volts: 300V* (TB200) 600V* (TB200HB) mps: 30* Center Spacing: or 7 16 (11.10 mm). Wire Range: #12-22 WG CU. Screw Size: #6-32 philslot screws. Poles: 2 to 30. Torque Rating: 9 in-lb. Distance Between Barriers: (8.97mm). Mounting: #6 screws. Operating Temperature: +130/-40 C (+266/-40 F). Construction: Molded, black thermoplastic base with tinplated brass terminals and zinc-plated steel screws. Breakdown Voltage: 4800V. gency Information: UL/CS; IEC Compliance; CE Certified. Flammability Rating: UL 94V0. * Max rating shown; some options may be rated lower - consult factory. Dimensions - in Poles B Poles B Poles B = 25.4mm. TB200-10SP TB200HB-06 TB200 - in (mm) 0.16 (4.0) 0.44 (11.2).31 (7.8) TB200HB 0.16 (4.0) 0.44 (11.2) 0.17 dia. (4.3) (11.1) B B (8.9) 0.16 (4.0) 1.12 (28.4) 0.56 (14.2) 0.16 (4.0) 0.90 (22.8) 1.37 (34.8) 0.17 dia. (4.3) (11.1) (8.9) 0.17 x 0.22 slots (4.3 x 5.6) 0.33 (8.4) 0.75 (19.0) Number Build--Code Series Poles Screw Options Marking Hardware Options TB 02 to 30 Blank = Steel philslot, zinc-plated L1 to L6 - (See page 296) QC1 to QC20 = Quick connects 200 = Standard 00 = Screws shipped bulk Marker strips (See page 297) J201 = Flat slip-on jumper (2 position only) 200HB = High barrier B = Brass philslot, nickel-plated Covers (See page 296) 0J3 = Over barrier jumpers BS = Brass Sems philslot, nickel-plated 0J5 = Over barrier jumpers SP = Steel Sems philslot, zinc-plated 0J7 = Over barrier jumpers P = Steel Sems (P-style) ST = Stainless steel, philslot SS = Stainless steel Sems, philslot STR = Stainless steel, phillips (recess) 292

13 Double row terminal blocks Screw Options B BS SP P ST SS STR Brass Philslot Brass SEMS Steel SEMS Steel SEMS Stainless Steel Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot SEMS Philslot Phillips (recess) Hardware Options Quick Connects ssembled: Terminals 0.25 x Maximum current rating 20 mps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC11 QC10 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Wire Management Products Quick Connects Bulk: minimum order per part no. 100 pieces. QC201/J QC202/J QC203/J QC 45 none Flat none QC 90 none QC204/J QC205/J QC206/J QC207/J QC208/J QC209/J Flat Flat Flat QC 45 Flat QC 90 QC 45 QC 45 QC 45 QC 90 QC 90 QC 90 Jumpers Bulk: minimum. order per part no. 100 pieces. Contact Cooper Bussmann for jumper assembly. J201/J OJ3/J OJ5/J OJ7/J Flat slip-on Slip-on over Closed over Closed over (not available on TB200HB) barrier for TB200HB barrier for TB200HB barrier for TB

14 Double row terminal blocks Series TB300 & TB345 Description: Double row terminal blocks. * mps: 30* (TB300) 45 (TB345) Center Spacing: or 9 16 (14.28mm). Wire Range: #8-22 WG CU. Screw Size: TB300 #8-32 philslot screws TB345 #10-32 philslot screws Poles: 2 to 24. Torque Rating: #8 screws - 16 in-lb; #10 screws - 20 in-lb Distance Between Barriers: 0.41 (10.5mm). Mounting: TB300 #8 screws; TB345 #10 screws. Operating Temperature: +130/-40 C (+266/-40 F). Construction: Molded, black thermoplastic base with tin-plated brass terminals and zinc-plated steel screws. Breakdown Voltage: 7500V. gency Information: UL/CS; IEC Compliance; CE Certified. Flammability Rating: UL 94V0. * Max rating shown; some options may be rated lower - consult Cooper Bussmann. Dimensions - in Poles B Poles B Poles B = 25.4mm. TB TB345-06SP TB300 & TB345 - in (mm) 0.22 (5.6) 0.50 (12.7) 0.56 (14.2) dia. (14.2) (5.3) 0.33 (8.4) 8-32 binding head screw - TB binding head screw - TB 345 B (10.4) 0.90 (22.8) 0.81 (20.5) 1.33 (33.8) 0.21 x 0.25 slots (5.3 x 6.3) Number Build--Code Series Poles Screw Options Marking Hardware Options TB 300 = 8-32 screw 02 to 24 Blank = Steel philslot, zinc-plated L1 to L6 = (pg 296) QC1 to QC20 = Quick connects (TB300 only) 345 = screw 00 = Screws shipped bulk Marker strips (pg 297) J301 = Flat slip-on jumper B = Brass philslot, nickel-plated Covers (pg 296) 0J6 = Over barrier jumper BS = Brass Sems philslot, nickel-plated 0J11 = Over barrier jumper (TB300 only) SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) 294

15 Double row terminal blocks Screw Options B BS SP P ST STR Brass Philslot Brass SEMS Steel SEMS Steel SEMS Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot Phillips (recess) Hardware Options Quick Connects ssembled: TB300 only. Terminals 0.25 x Maximum current rating 20 mps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Quick Connects Bulk: (*TB300 only) minimum order per part number. 100 pieces. Wire Management Products QC201 QC202 QC203 Flat none QC 45 none QC 90 none QC204 QC205 QC206 QC207 QC208 QC209 Flat Flat Flat QC 45 Flat QC 90 QC 45 QC 45 QC 45 QC 90 QC 90 QC 90 Jumpers Bulk: minimum order per part number 100 pieces. Contact Cooper Bussmann for jumper assembly. J301 OJ6 OJ11 Flat slip-on(tb300 only) Closed over barrier Slip-on over barrier 295

16 Marking options and covers for double row series Standard Marking Standard markings are applied directly to the side(s) of a block. Standard color is white. Standard height is inches (3.17mm). Note: Blocks marked on both sides require a different code for each side. Example Style L1 on one side of the block requires Style L2 on the other side to ensure common terminal marking. To order, add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block catalog number in the proper sequence. Special Marking Special markings are available at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking. Drawing(s) must be submitted to ensure accuracy of part required. Consult Cooper Bussmann for price and delivery. Note: Marking is not available on TB400 Series Covers Covers prevent personnel, screws and foreign items from contacting live terminals. vailable in white or clear plastic. Two cover clips supplied with each cover. Cover width is 1.31 inches (33.3mm). ll covers must be ordered separately. Consult Cooper Bussmann for special legends. Example: 10 position cover, white, TB100 Series, no legends = Number X L1 L2 L L4 L5 L6 RED MS K 3C 3 TER BLU BLK INPUT 20 OUT PUT G GND MB M 4 300V MX 5 Number Build--Code Series Cover Strip Poles X 120 = TB100/white 02 to 36 (TB100) 119 = TB100/clear 02 to 30 (TB200/TB200HB) 220 = TB200/white 02 to 24 (TB300/TB345) 220HB = TB200HB/white 219 = TB200/clear 219HB = TB200HB/clear 320 = TB300 & TB345/white 319 = TB300 & TB345/clear Note: Covers are not available on TB400 Series. Cover Clip Numbers (Bulk) DD1 = TB100 Series (Specify quantity) DD2 = TB200 Series (Specify quantity) DD2HB = TB200HB Series (Specify quantity) DD3 = TB300 Series (Specify quantity) 296

17 Top & bottom marking strips for double row terminal blocks Top Marker Strips Top mounting marker strips are available in white (opaque) plastic. Two cover clips are supplied with each marker strip. ll top marker strips must be ordered separately. Consult factory for special legends. Example: 12 position cover, TB200, x 0.312, with no legends = Number X Example: 12 position cover, TB200HB, 0.06 x 0.50, with no legends = Number X23312HB. Number Build--Code Series Top Marker Strip Poles X TB100 (0.060 thk x w) 02 to 36 (TB100) TB100 (0.032 thk x w) 02 to 30 (TB200/TB200HB) TB200 (0.060 thk x w) 02 to 24 (TB300/TB345) 233TB - TB200HB (0.060 thk x w) TB200 (0.032 thk x w) 203HB - TB200HB (0.032 thk x w) TB300 & TB345 (0.060 thk x w) TB300 & TB345 (0.032 thk x w) Note: Marking Strips are not available on TB400 Series Bottom Marker Strips Bottom mounting marker strips are made of black PVC, thick. Space is available to handle most marking situations. ll marker strips must be ordered separately. To order, specify part number, required legends and (BF) bottom forward, (BR) bottom reverse, (TF) top forward, or (TR) top reverse. Consult factory for specials. Example: 13 position strip, TB100 with no legends, space for marking one side = Number X Position for legends (one side, two sides) can be specified standard. Standard legend height is Standard leg-ends are 0-99 and -Z. Special legends are available on special order. Drawing(s) must be submitted to ensure accuracy of part required. Space for marking one side Dimensions (in) Space for marking two sides Dim. TB100 TB200 TB200HB TB300 TB345 TB N/ B N/ Wire Management Products Number Build--Code Series Bottom Marker Strip Poles Orientation X 105 = TB100/marking one side 02 to 36 (TB100) BF = Bottom forward 101 = TB100/marking both sides 02 to 30 (TB200/TB200HB) BR = Bottom reverse 205 = TB200/marking one side 02 to 24 (TB300/TB345) TF = Top forward 201 = TB200/marking both sides TR = Top reverse 295 = TB200HB/marking one side 291 = TB200HB/marking both sides 305 = TB300 & TB345/marking one side 301 = TB300 & TB345/marking both sides Note: Marking Strips are not available on TB400 Series. 297

18 Double row terminal blocks Series TB400 Description: Double row terminal blocks. mps: 75 Center Spacing: or 11/16 (17.45mm). Wire Range: #6-14 WG CU. Screw Size: #10-32 philslot screws. Poles: 2 to 12. TB Torque Rating: 20 in-lb. Distance Between Barriers: 0.56 (14.3mm). Mounting: #10 screws. Operating Temperature: +130/-40 C (+266/-40 F). Construction: Molded, black thermoplastic base with tin-plated brass terminals and zinc-plated steel screws. Breakdown Voltage: 7500V. TB400 - in (mm) gency Information: UL/CS; IEC Compliance; CE Certified. Flammability Rating: UL 94V0. Dimensions - in Poles B Poles B Poles B = 25.4mm dia. (3.8) (17.4) (17.4) B (14.3) 0.22 (5.6) (15.9) 1.12 (28.4) 0.22 dia. (5.6) 1.81 (46.0) Screw Options 0.46 (11.7) 0.76 (19.3) 1.34 (34.0) B ST STR Brass Philslot Stainless Steel Stainless Steel Nickel-Plated Philslot Phillips (recess) Hardware Options OJ14: Closed over barrier Number Build--Code Series Poles Screw Options Marking TB to 12 Blank = Steel philslot, zinc-plated Not available 00 = Screws shipped bulk B = Brass philslot, nickel-plated ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) 298

19 Base mount double row terminal blocks Series KU Description: Base mount double row terminal blocks. Volts: 600V mps: 60* Center Spacing: (15.88mm). Poles: Wire Range: #6-22 WG CU. Screw Size: #10-32 nickel-plated brass. Torque Rating: 20 in-lb. Distance Between Barriers: (11.09mm). Mounting: Base mount. For 35mm DIN rail mountable, add ND prefix. Construction: Molded, black thermoplastic base with nickel-plated brass terminals. Operating Temperature: 105 C max. gency Information: UL/CS; CE Certified. Flammability Rating: UL 94V0. * 60 rating achieved with #6 copper wire crimped to ring terminal. Series KU - in (mm) 0.62 (15.9) B Dimensions - in KU KUX Only Poles B = 25.4mm. #10 screw clearance 0.43 (11.1) 2.00 (50.8) 0.50 (12.7) (31.8) 1.50 (38.1) Wire Management Products Number Build--Code Series Poles Screw Options Covers Marking Strip KU = Standard block 02 to = Screws shipped bulk WC = Top cover & MT = Matte finish KUH = Block W = Brass washer head, 2 end plates NU = Numbered 1 to 12, horizontal KUX = Short block nickel-plated NUV = Numbered 1 to 12, vertical KUSC = Standard w/shorting strap P = Steel screw w/pressure plate PT = Marker strip for cover & 4 shorting screws zinc-plated KURL = Standard w/removable link B = Brass washer head, no plating KUXSC = Short block w/shorting strap BP = Brass philslot, nickel-plated & 4 Shorting screws KUXRL = Short block w/removable link ccessories MTMU## NUM## JU12 NUE NUC## Molded Marking Tape Molded Marking Tape Jumper End Piece for NUC Cover Matte Finish 12 Circuits 299

20 Standard base terminal blocks Series TS 8.0, 10.0, 12.0, 13.5mm centers Description: 8, 10, 12 and 13.5mm center, standard base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. mps: 20 (TS08) 30 (TS10) 35 (TS12) 50 (TS14) Wire Range: See table. Screw Size: See table. Poles: 2 to 12. Torque Rating: See table. Operating Temperature: +105/-30 C (+221/-22 F). gency Information: UL/CS; CE Certified Flammability Rating: UL 94V2(white) E C B D Dimensions - in (mm) Poles TS08 TS10 TS12 TS (15.8) (17.5) (20.7) (23.0) (23.8) (27.5) (32.7) (36.5) 4 2 (31.8) (37.5) (44.7) (50.0) (39.8) (47.5) (56.7) (63.5) (47.8) (57.5) (68.7) (77.0) (55.8) (67.5) (80.7) (90.5) (63.8) (77.5) (92.7) (104.0) (71.8) (87.5) (104.7) (117.5) (79.8) (97.5) (116.7) (131.0) (87.8) (107.5) (128.7) (144.5) (95.8) (117.5) (140.7) (158.0) D F F D WIRE PROTECTOR 1.2mm STNDOFF Torque Clamping Wire Range Dimensions - in (mm) Position in-lb rea (mm 2 ) WG (CU) Screw B C D E F TS Sol./Str. M2.6x (17.0) 0.57 (14.5) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS Sol./Str M2.6x (17.0) 0.57 (14.5) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS Sol., Str. M3.0x (20.2) 0.67 (17.0) 0.39 (10.0) 0.14 (3.6) 0.13 (3.4±0.1) TS Sol./Str, 10 Sol. M3.0x (20.2) 0.67 (17.0) 0.39 (10.0) 0.14 (3.6) 0.13 (3.4±0.1) TS Sol./Str. M3.5x (23.8) 0.75 (19.0) 0.47 (12.0) 0.14 (3.9) 0.15 (4.2±0.1) TS Sol./Str. M3.5x (23.8) 0.75 (19.0) 0.47 (12.0) 0.15 (3.9) 0.15 (4.2±0.1) TS Sol./Str. M4.0x (25.6) 0.99 (25.2) 0.53 (13.5) 0.17 (4.4) 0.19 (5.0±0.1) TS Sol./Str. M4.0x (25.6) 0.99 (25.2) 0.53 (13.5) 0.17 (4.4) 0.19 (5.0±0.1) Number Build--Code Series Base Poles T S 08 = = Standard 02 to = = Standard w/ wire protector 12 = =

21 Flat base terminal blocks Series TS 8.0, 10.0mm centers Description: 8 and 10mm center, flat base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contact and stainless steel wire protector. mps: 20 (TS08) 30 (TS10) Wire Range: See table. Screw Size: See table. Poles: 2 to 12. Torque Rating: See table. Operating Temperature: +105/-30 C (+221/-22 F). gency Information: UL/CS; CE Certified. Flammability Rating: UL 94V2 (white). Dimensions - in (mm) Poles TS08 TS (15.8) (17.5) (23.8) (27.5) 4 2 (31.8) (37.5) (39.8) (47.5) (47.8) (57.5) (55.8) (67.5) (63.8) (77.5) (71.8) (87.5) (79.8) (97.5) (87.8) (107.5) (95.8) (117.5) B D F C F E D D WIRE PROTECTOR Wire Management Products Torque Clamping Wire Range Dimensions - in (mm) Position in-lb rea (mm2) WG (CU) Screw B C D E F TS Sol./Str. M2.6x (16.3) 0.53 (13.3) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS Sol./Str M2.6x (16.3) 0.52 (13.3) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS Sol., Str. M3.0x (20.2) 0.62 (15.8) 0.39 (10.0) 0.14 (3.6) 0.13 (3.2±0.1) TS Sol./Str., 10 Sol. M3.0x (20.2) 0.62 (15.8) 0.39 (10.0) 0.14 (3.6) 0.13 (3.2±0.1) Number Build--Code Series Base Poles TS 08 = = Flat 02 to = = Flat w/ wire protector 301

22 Raised base terminal blocks Series TS - 8.0, 10.0mm centers Description: 8 and 10mm center, raised base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. mps: 20 (TS08) 30 (TS10) Wire Range: See table. Screw Size: See table. Poles: 2 to 12. Torque Rating: See table. Operating Temperature: +105/-30 C (+221/-22 F). gency Information: UL/CS; CE Certified Flammability Rating: UL 94V2 (white) Dimensions Poles TS08 TS (15.8) (17.5) (23.8) (27.5) 4 2 (31.8) (37.5) (39.8) (47.5) (47.8) (57.5) (55.8) (67.5) (63.8) (77.5) (71.8) (87.5) (79.8) (97.5) (87.8) (107.5) (95.8) (117.5) Note: TS Series standard base pictured above. C B D 4.3mm F F E D D WIRE PROTECTOR Torque Clamping Wire Range Dimensions - in (mm) Position in-lb rea (mm 2 ) WG (CU) Screw B C D E F TS Sol./Str. M2.6x (16.30) 0.67 (16.90) 0.32 (8.00) 0.11 (2.90) 0.11 (2.8±0.1) TS Sol./Str M2.6x (16.30) 0.67 (16.90) 0.32 (8.00) 0.11 (2.90) 0.11 (2.8±0.1) TS Sol., Str. M3.0x (20.20) 0.79 (20.10) 0.39 (10.00) 0.14 (3.60) 0.13 (3.2±0.1) TS Sol./Str., 10 Sol. M3.0x (20.20) 0.79 (20.10) 0.39 (10.00) 0.14 (3.60) 0.13 (3.2±0.1) Number Build--Code Series Base Poles TS 08 = = Raised 02 to = = Raised w/ wire protector 302