COIN CELL PC BATTERY HOLDERS
|
|
- May Brooks
- 5 years ago
- Views:
Transcription
1 COIN CELL PC BATTERY HOLDERS 20mm to 30mm Sizes 12mm to 16mm & 1/3 N Sizes SINGLE CELL HOLDER (3-VOLT) DUAL CELL HOLDER (6-VOLT) Single and Dual Printed Circuit Cell Holders for Lithium Coin Cells. Designed for easy battery replacement. Will accommodate diameters from 12mm to 30mm and heights from 1.6mm to 7.7mm. Some holders will accept more than two cells if they fall within the heights specified. IDEALLY SUITED Duracell, Eveready, Panasonic, Ray-O-Vac, Sanyo, Varta, Toshiba, Seiko and other major battery manufacturers Computer memory, power transfer and back-up systems Video and telecommunications power back-up Preprogrammed video and electronic games Microprocessors and Microcomputer memory hold Notebook and laptop applications Emergency power systems Industrial and commercial security and alarm systems Communications power sources Miniaturized battery power devices DESIGN ADVANTAGES Low profile for high density packaging Reliable spring tension assures low contact resistance Retains battery securely to withstand shock and vibration Unique notched slots assure quick and easy battery insertion and replacement Base material UL Rated 94V-0. Impervious to most industrial solvents Operating temperature range: -60 F to +293 F (-50 C to +145 C) Advanced air-flow design pattern enhances air circulation around battery Nickel-over-copper plated spring steel contacts feature clearly marked polarities to help guard against improper insertion DWG. 1 DWG. 2 DIMENSIONS BATTERY CROSS REFERENCE DWG. N0. OF DURACELL, EVEREADY, PANASONIC, RAY-O-VAC NO. CELLS A B C D E L O.D. M CELL SANYO, SONY, SEIKO, TOSHIBA, VARTA /3N DL 1/3N, K58L, CR 1/3N mm BR1216, CR1216, BR1220, CL1220, CR1220, BR mm BR1616, CR1612, CR1616, CR1620, CR BR2016, CR2016, DL2016, BR2020, CL2020, BR2025, mm CR2025, DL2025, BR2032,CR2032, DL BR2320, CL2320, CR2320, BR2325, CR2325, DL2325, mm BR2330, CL2330, BR2335, CR2354** mm CR2430, DL2430, CR2450*, DL2450*, CR mm BR3032 * For Cat. No.1025 (1) cell only. ** For Cat. No (1) cell only. For Cat. No only. 6
2 SCREW TERMINALS OFFSET LEG STRAIGHT LEG SOLDER TAB SOLDER TYPE PRESS-FIT SCREW TERMINALS.187 QUICK-FIT TYPE Terminal:.020 Steel, Screw: Steel, Zinc Plate 1272 Mounting Detail Press-fit into.312 sq. hole Terminal:.020 Steel, Screw: Steel, Zinc Plate 1273 Mounting Detail Press-fit into.312 sq. hole BINDING POST TERMINALS (RIVET TYPE) SPADE BOLTS 6-32 & /32 Terminal: Brass, 3/32 Terminal: Brass, 1/8 Terminal: Brass, Steel, Zinc Plate A B Thread /8 13/ /8 1/
3 SCREW TERMINALS m 6-32 INSERT TERMINAL INSERT TERMINAL These sturdy, easy to mount space saving 6-32 insert terminals are available with screws installed and captivated. They are also available with screw unassembled or without a screw. Supplied with screw installed and captivated, with screw unassembled, or without screw These sturdy, low cost PC mount terminals, feature an anti-rotation tab for use with spade terminals. They are available with the screw installed and captivated, the screw unassembled or without a screw. Supplied with screw installed and captivated, with screw unassembled, or without screw Rated: 15 Amps Terminal:.032 Brass, Screw: Combination drive, Stainless Steel Rated: 30 Amps Terminal:.062 Brass, Screw: Stainless Steel ) 1284 (Supplied Less Screw) ) 1293 (Supplied Less Screw) 8-32 HEAVY DUTY TERMINAL HEAVY DUTY TERMINAL These 8-32 heavy duty terminals easily mount on PC boards and feature a notched leg that facilitates good mechanical and solder connections below the circuit board. Below the board notched leg, to facilitate mechanical and solder connections Available with screw installed or unassembled These heavy duty terminals are available with the screw installed or unassembled, and feature easy access to connect solid or stranded wire, crimp type. Below the board notched leg, to facilitate mechanical and solder connections Available with screw installed or unassembled Rated: 15 Amps Terminal:.064 Brass, Screw: Brass, Rated: 30 Amps Terminal:.064 Brass, 1209 (Screw Installed) 1207 ) 1283 (Screw Installed) 1208 ) 37
4 COMPUTER & CONNECTOR HARDWARE JACK SCREWS Equivalent to AMP, CANNON & TRW Jack Screws D subminiature connector mounting screw Other sizes upon request SEMS JACK SCREWS D subminiature connector mounting screw Captivated helical spring lockwasher, simplifies use Flat washer and nut supplied unassembled m Steel JACK ONLY JACK WITH HARDWARE ( in Bulk) ZINC PLATE & ZINC PLATE & L ZINC PLATE & ZINC PLATE & GOLD IRIDITE CLEAR CHROMATE DIM. GOLD IRIDITE CLEAR CHROMATE JACK WITH HARDWARE L JACK ONLY (Supplied Unassembled DIM. in Bulk) Steel, Zinc Plate & Clear Chromate MOUNTING HARDWARE Our assortment of standard clips and washers offer the needed flexibility to secure your connectors in the manner best suited to your instrumentation and design. U CLIP TURNABLE JACK SCREWS Turnable jack screws, available with or without screwdriver slot make mating and disconnecting computer connectors quick and easy. DIRECT ACCESS 2062 SADDLE WASHER T L DIM. DIM. WITHOUT SLOT WITH SLOT STRAIGHT KNURL Steel, Black Oxide 2063 BOW TIE RETAINING CLIP WITHOUT SLOT WITH SLOT Steel, Zinc Plate & Clear Chromate SLIM LINE X x 1/ x 9/32 H DIM. WITHOUT SLOT WITH SLOT Steel, Nickel Plate 41
5 THREADED STANDOFFS HEX ROUND 44 MATERIAL Brass: per ASTM-B16 Aluminum: QQ-A-225/3, Alloy 2011-T3 THREAD PLATING Zinc: ASTM B633 Iridite Finish: MIL-C-5541 O.D..156 (5/32).187 (3/16).375 (3/8) LENGTH 3/16 (.187) 1/4 () 5/16 (.312) 1/4 () 1/4 () 1/4 () 1-1/4 (1) 1-3/4 (1.750) 2-1/4 (2) 2-12 (2.500) 1/4 () NOTE: Spacers over long are tapped.375 deep each end. ALUMINUM IRIDITE FINISH HEX ROUND 1797A 1797B 1797C 1797D A 1926B 1926C 1926D 1926E 1801A 1801B 1801C 1801D A 2315B 2315C 2315D 2315E BRASS ZINC PLATE HEX ROUND 1798A 1798B 1798C 1798D A B 1450A 1450B 1450C D E A 1451B 1451C 1451D 1451E A 1474B 1474C D E A 1452B 1452C 1452D 1452E 1802A 1802B 1802C 1802D A B 1547A 1547B 1547C D E A 1548B 1548C 1548D 1548E F A 1692B 1692C D E A 1549B 1549C 1549D 1549E
This PDF catalog provides a variety of tools for locating our products. These tools, located to the left of your screen, are called bookmarks.
Using This Catalog This PDF catalog provides a variety of tools for locating our products. These tools, located to the left of your screen, are called bookmarks. The TABLE OF CONTENTS bookmark contains
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationRECHARGEABLE BATTERIES
AAA RECHARGEABLE BATTERIES AA D C RECHARGEABLE NICKEL METAL HYDRIDE Nickel Metal Hydride batteries have double the capacity of standard nickel cadmium cells and can be charged faster without the memory
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More informationTable of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
More information4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationTable of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationGROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More informationCopper Bar... ASTM B187, B152 Silicon Bronze... ASTM F468, F467, F651
Eaton offers a range of cable grids and distribution frames to meet various telecommunications applications. Cable grids feature light-weight, yet durable steel c-channel, and are design to support cable
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationFuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
More informationSGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationOptolite Products. Press to Test Type Incandescent Miniature General Purpose Size T-1 ¾
tube and nuts, aluminum, black anodized per steel. Brass terminals, tin plated per per L-P-349. See Selection Guide. hole.500 in. ±015 in. dia. Approximately.4 oz. less lamp. 03-91080 Type General Purpose
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationRoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationBonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
More informationS Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationAssembly Instructions MP-P2 Power Supply and Chassis Base Plate
Assembly Instructions MP-P2 Power Supply and Chassis Base Plate The MP-P2 Power Supply is the supply designed to power the mother board and its complement of plug-on boards including the MP-09 Microprocessor
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationFuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
More information300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More informationAccessories Cannon offers a wide selection of. Accessories Selection Guide
Cannon offers a wide selection of accessories that allow the design engineers to configure the product for their exacting needs. The accessories range from the simple actuating handle to junction and backshells,
More informationCONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationHeavy-Duty Top Post Terminals Fits 6 to 1 gauge cables. Heavy-Duty Top Post Epoxy Coated Terminals
1 6 7 5 4 3 2 1 Fits positive or negative posts 2 Bolt locks firmly from left to right side 3 Lead Alloy 4 Steel inserts avoid stripping 5 Universal Holds cable or strap 6 Removable plate for easy assembly
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/52D 12 September 2012 SUPERSEDING MIL-DTL-55302/52D 17 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU,
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationPARTS LIST CHARGER 2025 AB CHARGER 2025 DB
PARTS LIST CHARGER 2025 AB CHARGER 2025 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) - PACK OF 10
More informationModel C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
More informationAIR TRIMMER CAPACITORS MINIATURE, STANDARD & HIGH VOLTAGE
Description Air dielectric Rated voltage 250 VDC (500 VDC for AT 500 s) Low temperature coefficient Low capacitance drift Very stable over time Terminations gold plated High Q factor Multi-turn, high resolution
More informationCONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationMarinco Heavy Duty Plus Wiper Systems
4.60 (117.0mm).25 (6.5mm) 1074 Kenran Industrial Dr. Marinco Heavy Duty Plus Wiper Systems NEW!!! AFI 3.0 Wiper Motor The new Heavy Duty Plus 3.0 Motor is AFI s only external linkage motor. This new design
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationM Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More information