MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
|
|
|
- Polly Knight
- 6 years ago
- Views:
Transcription
1 Description connectors conform to the European CECC Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug is.140 which is 30% smaller than the SMB. This series provides designers with options where weight and physical space is limited. provides broadband capability though 6GHz with a snap-on connector design. A range of connectors are available including PC board and cable connectors. Features/Benefits Broadband performance with low reflection DC to 6 GHz. Low cost combined with high quality. Quick connect/disconnect snap-on mating reduces installation time. Accommodates a wide range of miniature RG flexible coaxial cables including semi-rigid cable provides customer flexibility in their design and manufacturing with a durable connector. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB Ohm Coaxial Connectors Specifications 22 Plugs 23 Receptacles PCB 23 Application Antenna Automotive Base Station Components GPS Head End Equipment Instrumentation PC/LAN Radios Telecom WLAN 17
2 50 Ohm Specifications ELECTRICAL MECHANICAL Impedance Frequency range Voltage rating Dielectric withstanding voltage VSWR Contact resistance Insulation resistance Insertion loss: 50 ohms 0-6 GHz 335 VRMS 1000 Volts 2.5GHz (straight) 2.5GHz (rt. angle) Center contact: 5 milliohms; Outer contact: 1.0 milliohms; 5000 megohms min GHz Mating Engagement forces Connector affixment to cable Cable affixment to center contact Contact captivation Connector durability 50 ohm snap-on coupling, per CECC engagement 4.5 lbs (20N) max. disengagement 2.3 lbs (10N) min. Braid and jacket: hex crimp. Solder All types, except as noted 500 mating and unmating cycles min. MATERIAL Body, Metal Parts Brass per QQB-626 Center contacts Male: Brass per QQB626 gold plated Female: Beryllium (30 u gold) copper per QQC 530 heat treated per MIL H 7199 Insulators PTFE Gasket Silicone Rubber Crimp ferrules Seamless copper tubing alloy ENVIRONMENTAL Temperature range -65 C to C Thermal shock 107 (test except high 200 C Vibration 204, snap-on (test Shock 213, snap-on (test Corrosion 101 (test 5% salt solution. PLUG JACK NOTE: 1. I.D. to meet VSWR and contact resistance when mated with.48/.53mm diameter pin 18
3 50 Ohm Crimp Attachments for Flexible Cable Crimp Plug, Crimp P-51SX P-51S1X Nickel Plated for RG-174, 188, P-51SX Gold Plated for RG P-51SX Gold Plated for RD-316 Fig. 3 Fig. 4 Crimp Jack, Crimp J-51SX J-51S1X Nickel Plated for RG-174, 188, J-51SX Gold Plated for RG-178, 196 Straight Bulkhead Jack J-51SX Gold Plated for RD J-51SX Angle Plug, Crimp P-51AX P-51A1X Nickel Plated for RG-174, 188, P-51AX Nickel Plated for RG OHM CABLE CONNECTORS Cable Cable Attachment Construction Amphenol RG-/U CAI Plt. Ins. Fig. RG-174, 188, 316 Crimp Solder C74 P11 D1 Gold Plated P-51SX 1 RG-174, 188, 316 Crimp Solder C74 P11 D1 Nickel Plated P-51S1X 1 RG-174, 188, 316 Crimp Solder C74 P11 D1 Gold Plated J-51SX 2 RG-174, 188, 316 Crimp Solder C74 P11 D1 Nickel Plated J-51S1X 2 RD-174, 188, 316 Crimp Solder C77 P11 D1 Gold Plated J-51SX 3 RG-174, 188, 316 Crimp Solder C77 P11 D1 Gold Plated P-51AX 4 RG-174, 188, 316 Crimp Solder C77 P11 D1 Nickel Plated P-51A1X 4 RG-178, 196 Crimp Solder C74 P11 D1 Gold Plated P-51SX 1 RG-178, 196 Crimp Solder C74 P11 D1 Gold Plated J-51SX 2 RG-178, 196 Crimp Solder C77 P11 D1 Gold Plated P-51AX 4 RD-316 Crimp Solder C77 P11 D1 Gold Plated J-51SX 3 RD-316 Crimp Solder C74 P11 D1 Gold Plated P-51SX 1 19
4 50 Ohm For Semi-Rigid Cable and PCB Angle Plug, Solder to Body P-51AX for.085 S/R (2.2mm) P-51AX for.141 S/R (3.6mm) Jack, Solder to Body J-51SX for.085 S/R (2.2mm) Fig. 3 Plug Solder to Body P-51SX for.085 S/R 2.2mm 50 OHM SEMI-RIGID CABLE CONNECTORS Cable Cable Attachment Construction Amphenol RG-/U CAI Plt. Ins. Fig..085 Semi-Rigid Solder Solder C76 P11 D1 Gold Plated P-51AX Semi-Rigid Solder Solder C75 P11 D1 Gold Plated J-51SX Semi-Rigid Solder Solder C75 P11 D1 Gold Plated P-51SX Semi-Rigid Solder Solder C76 P11 D1 Gold Plated P-51AX 1 20
5 50 Ohm PCB and Surface Mount Fig. 3 Printed Circuit Receptacle Blunt Post Terminal, Four Legs J-51PX.155 (3.9mm) Legs Gold Plated PCB Right Angle Receptacle Blunt Post Terminal, Four Legs J-51AX.155 (3.9mm) legs Gold plated 50 OHM PCB RECEPTACLES Surface Mount Jack Receptacles J-51P Gold Plated Terminal MTG Amphenol Description Type Plt. Ins. Hole Construction s Fig. PCB Panel Jack Receptacles Blunt Post P11 D1 T Stand Off Pads J-51PX 1 PCB Panel Jack Receptacles Blunt Post P11 D1 T Stand Off Pads J-51AX 2 50 OHM SURFACE MOUNT Terminal MTG Amphenol Description Type Plt. Ins. Hole Construction s Fig. Surface Mount Jack Receptacles Blunt Post P11 D1 Surface Mount J-51P 3 21
6 75 Ohm Specifications ELECTRICAL MECHANICAL Impedance Frequency range Voltage rating Dielectric withstanding voltage VSWR Contact resistance Insulation resistance Insertion loss: 75 ohms 0-6 GHz 170 Volts 500 Volts 2.5 GHz (straight) 2.5GHz (rt. angle) Center contact: 5 milliohms; Outer contact: 2.5 milliohms; 10,000 megohms min GHz Mating Engagement forces Connector affixment to cable Cable affixment to center contact Contact captivation Connector durability 75 ohm snap-on coupling, per CECC engagement 4.5 lbs (20N) max. disengagement 2.3 lbs (10N) min. Braid and jacket: hex crimp. Solder All types, except as noted 500 mating and unmating cycles min. MATERIAL Body, Metal Parts Brass per QQB-626 Center contacts Male: Brass per QQB626 gold plated Female: Beryllium (30 u gold) copper per QQC 530 heat treated per MIL H 7199 Insulators PTFE Gasket Silicone Rubber Crimp ferrules Seamless copper tubing alloy ENVIRONMENTAL Temperature range -65 C to C Thermal shock 107 (test except high 200 C Vibration 204, snap-on (test Shock 213, snap-on (test Corrosion 101 (test 5% salt solution. PLUG JACK NOTE: 1. I.D. to meet VSWR and contact resistance when mated with.48/.53mm diameter pin 22
7 75 Ohm Crimp Attachments for Flexible Cable Fig. 3 Crimp Plug, Crimp P-71SX Gold Plated for RG P-71S2X Gold Plated for RD-179 Angle Plug, Crimp P-71AX Gold Plated for RG P-71A2X Gold Plated for RD-179 Straight Surface Mount J-71P Gold Plated 75 OHM CABLE CONNECTORS Cable Cable Attachment Construction Amphenol RG-/U CAI Plt. Ins. Fig. RG-179 Crimp Solder C74 P11 D1 Gold Plated P-71SX 1 RD-179 Crimp Solder C74 P11 D1 Gold Plated P-71S2X 1 RG-179 Crimp Solder C77 P11 D1 Gold Plated P-71AX 2 RD-179 Crimp Solder C77 P11 D1 Gold Plated P-71A2X 2 75 OHM SURFACE MOUNT CONNECTOR Cable Attachment Construction Amphenol CAI. Ins. Fig. Crimp Solder C74 D1 Gold Plated J-71P 3 23
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
onlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Cannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
BNC SERIES Miniature Coaxial Connectors
Miniature Coaxial Connectors Description favorite in the adaptation of a wide range of aerial rods, Jy Chyun s NC connectors feature an allencompassing antenna mount, backed by exceptional electrical characteristics,
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
N Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
BNC75 Receptacle Connector for Broadcast
BNC Receptacle Connector for Broadcast BNC Series for 12G-SDI Characteristic Impedance Ω Lock Type Bayonet OUTLINE BNC series for broadcasting equipment is a high performance Ω connector which is compliant
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
Amphenol Australia. ATM Series PRODUCT SHORTFORM. Amphenol Australia Pty Ltd. ATM Series
EX-STOCK AUSTRALIA ATM Series PRODUCT SHORTFORM Amphenol Australia Pty Ltd ATM Series ATM Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications,
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
Plug (male) Jack (female) Interface dimensions conformable to the standards: min. max. min. max. A B C D E H I
Plug (male) Plug Jack min. max. min. max. A B C D E H I Jack (female) Interface dimensions conformable to the standards: 279 Electrical data Requirements Mechanical data Requirements Environmental data
MMBX / MCX series R223 / R113 / R213
4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12
1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Apr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
Assembly Instructions-C70 Amphenol MMCX
Assembly Instructions-C70 Amphenol All parts of the connector are shown. Strip the inner conuctor, ielectric, an jacket as per RECOMMENDED CABLE STRIPPING DIM S in catalog. Slie the INSULATOR onto inner
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
Amphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
Stac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
Wedge in Plugs Stock No
Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.
DATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
RF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E
Application Specification 114-13069 FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
Ethernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
I Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
Tooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
SP Series - Part Numbering
SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications
LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
Product Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
Connectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
nterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating
new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
Coaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
for Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
APPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
Product Specification QSL RF Connectors
Product Specification QSL RF Connectors 108-2324 04Feb09 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics QSL RF Connectors which
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
PRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland