Hinges and Flap Fittings Furniture Hinges

Size: px

Start display at page:

Download "Hinges and Flap Fittings Furniture Hinges"

Laurel Daniels
5 years ago
Views:

1 Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left Right Brass plated Left Right Packing: 1 or 20 pcs. Rolled hinge, narrow Size A x B mm Barrel Ø C mm Ø Thickness D mm Screw Ø mm Ø No. of drilled holes Material/ 25 x Steel galvanized Crank: A, straight With riveted pin Crank: A 0 x Steel galvanized Packing: 10 or 100 pcs. Stainless steel quality SUS x Steel galvanized Stainless steel quality SUS x Steel galvanized Stainless steel quality SUS x Steel galvanized Stainless steel quality SUS x Steel galvanized Stainless steel quality SUS FF.7

Rolled hinge, wide Crank: A, straight With riveted pin Crank: A Size A x B mm Barrel Ø C mm Ø Packing: 10 or 100 pcs. Thickness D mm Screw Ø mm Ø No. of drilled holes Material/ 0 x 0 4.0 0.9 2.

2 Rolled hinge, wide Crank: A, straight With riveted pin Crank: A Size A x B mm Barrel Ø C mm Ø Packing: 10 or 100 pcs. Thickness D mm Screw Ø mm Ø No. of drilled holes Material/ 0 x Steel chromatized 40 x Steel chromatized Stainless steel quality SUS x Steel chromatized Stainless steel quality SUS x Steel chromatized Stainless steel quality SUS x Steel chromatized Stainless steel quality SUS Rolled hinge for folding-sliding doors Size 40 x 0 mm Size 50 x 42 mm Crank: A, straight Version: Rounded flange shape, with riveted pin, with plastic friction bearing Material Steel Packing: 10 or 500 pcs. Material Steel Packing: 1 or 250 pcs. Nickel plated Nickel plated FF.74

barrel is offset from the centre by the same distance as the raised hinge section.

3 Rolled hinge for folding-sliding doors Hinge side *Establish the pivot by trial mounting Without height adjustment, size 50 x 50 mm If the panels of the sliding folding doors have to be of identical width, the hinge barrel is offset from the centre by the same distance as the raised hinge section. Crank: F F Material Steel Packing: 10 or 250 pcs. Galvanized Size 50 x 60 mm Crank: F F Material Steel Packing: 1 or 250 pcs. Galvanized FF.75

Piano hinge for screw fixing Order reference Also available in fixed lengths. Length:,500 mm Manufactured in compliance with DIN 7956 Steel Width open B mm 20 Brass plated 51.01.

01.717 51.01.57 Ø Nickel plated 40 Brass plated 51.01.75 51.01.548 Packing: 1 pc. Brass Flange thickness: 0.8 mm Barrel Ø:.

4 Piano hinge for screw fixing Order reference Also available in fixed lengths. Length:,500 mm Manufactured in compliance with DIN 7956 Steel Width open B mm 20 Brass plated Nickel plated Brass plated Flange thickness: 0.7 mm (width opening 40 mm: 0.8 mm) Barrel Ø:. mm (width opening 40 mm:.5 mm) Version: Rolled Nickel plated 2 Brass plated Ø Nickel plated 40 Brass plated Packing: 1 pc. Brass Flange thickness: 0.8 mm Barrel Ø:.5 mm Version: Rolled Ø Stainless steel, quality SUS 40 Flange thickness: 0.8 mm Barrel Ø:.5 mm Version: Rolled Ø Width open B mm Packing: 1 pc. Packing: 1 pc. 2 Polished Width open B mm FF.76

Piano hinge for screw fixing Aluminium Length:,500 mm Flange thickness: 1.0 mm Barrel Ø:.8 mm Version: Without groove Ø Width open B mm Packing: 1 pc. 2 Bright 51.20.

5 Piano hinge for screw fixing Aluminium Length:,500 mm Flange thickness: 1.0 mm Barrel Ø:.8 mm Version: Without groove Ø Width open B mm Packing: 1 pc. 2 Bright Piano hinge for welding on Order reference Also available in fixed lengths. Length:,500 mm Flange thickness: 1.5 mm Barrel Ø: 6.0 mm Version: Rolled, without screw holes Manufactured in compliance with DIN 7956 Steel Ø Width open B mm Packing: 1 pc. 2 Bright FF.77

Stainless steel, quality SUS 40 Version: Weldable, anti-magnetic Width open B mm Packing: 1 pc. 2 51.04.

6 Stainless steel, quality SUS 40 Version: Weldable, anti-magnetic Width open B mm Packing: 1 pc Rolled hinge, wide Size A x B x C x D mm Packing: 10 or 100 pcs. Material/ 60 x 44 x 8 x 1.6 Stainless steel quality SUS FF.78

7 Pivot hinge with identical flanges Opening angle: 180 Material: Steel : Yellow chromated Flange thickness: mm Opening angle restraint: Without stop Length mm Packing: 1 or 20 pairs Corner pivot hinge, straight Material: Brass Opening angle restraint: Without stop Turning point external Opening angle: 250 : Polished Flange thickness: 2 mm Application Shelf Length mm Packing: 1, 5 or 25 pairs FF.79

500 Pivot hinge for writing bureau Application Flap closed Flap open Area of application: For flaps Opening angle: 90 Material:

8 Corner pivot hinge, cranked Application Shelf Material: Brass : Matt Opening angle restraint: Without stop Opening angle: 180 Flange thickness: 4 mm Turning point external Length mm Packing: 1, 5 or 25 pairs Pivot hinge for writing bureau Application Flap closed Flap open Area of application: For flaps Opening angle: 90 Material: Brass : Polished Opening angle restraint: With stop at 90 opening Version: With one short flange Length mm Packing: 1 or 5 pairs Flange thickness mm 80 / / FF.80

9 Pivot hinge Opening angle: 140 For door thickness: mm Opening angle restraint: Without stop : Press fitting Material Plastic Packing: 20 or 200 pairs Colour White Brown Black Application Flap closed Function Flap open Removing the door: Lift the spring-loaded pin with a small screwdriver. Condition: Drilled hole in door and slotted hole in sleeve are identical. Setting the door gap: Widen or reduce door gap by turning the flange. Fix adjusted door gap with a small chipboard screw. FF.81

Hinge for wood thicknesses from 18 mm and above -dimensionally adjustable for door alignment with millimetre accuracy Chrome plated matt/grey Dimensions Black/black Area of application: For overlay

10 Hinge for wood thicknesses from 18 mm and above -dimensionally adjustable for door alignment with millimetre accuracy Chrome plated matt/grey Dimensions Black/black Area of application: For overlay or inset mounting Opening angle: 180 Material: Zinc alloy/plastic : For screw fixing Adjustment facility: Height ± 1.5 mm, side ± 1 mm, depth ± 1.5 mm (with overlay mounting), height ± 1.5 mm, side ± 1.5 mm, depth ± 1 mm (with inset mounting) ±1.5 ±1 ±1.5 ±1.5 ±1.5 ±1 Supplied with 1 Hinge, chrome plated matt or black 4 Cover caps, grey, black or white /Colour Hinge: Chrome plated matt, cover cap: Grey Hinge: Chrome plated matt, cover cap: White Hinge: Black, cover cap: Black Packing: 1 pc Overlay door mounting Note Factory setting: Gap 1.5 mm Inset door mounting Gap adjustment: 0 mm Drilling pattern Number of hinges per door With wood thickness 18 mm: A = 9 mm With wood thickness >20 mm: A = 10 mm > Sample measurements for 20 mm thick wood Hinge distance min. 500 mm width up to 600 mm The door's width must not exceed its height FF.82

VICI Hinge for wood thickness of 19 mm Drilling dimensions Opening angle: 180 Material: Zinc alloy housing, brass link Housing finish Nickel plated Brass plated Packing: 1 or 50

11 VICI Hinge for wood thickness of 19 mm Drilling dimensions Opening angle: 180 Material: Zinc alloy housing, brass link Housing finish Nickel plated Brass plated Packing: 1 or 50 pcs Hinge for wood thickness mm Drilling dimensions Opening angle: 180 Material: Steel : Brass plated Application and planning dimensions For wood thickness mm Screws 8 mm Dim. A mm Dim. B mm Dim. C mm Dim. D mm Dim. E mm Gap F mm Gap G mm Gap H mm For wood thickness mm Packing: 1, 0, 50 or 140 pcs FF.8

SOSS Hinge for wood thickness 41 51 mm Opening angle: 180 Version: Link with plastic slide plates Supllied with fixing material Calculation table for number of required door strips Example: A door

12 SOSS Hinge for wood thickness mm Opening angle: 180 Version: Link with plastic slide plates Supllied with fixing material Calculation table for number of required door strips Example: A door with 700 mm width, 45 kg weight and 41 mm thickness required door strips with or width mm weight kg thickness mm Number of door strips Version Packing: 2 pcs. Brass plated Nickel plated Without plastic slide plates With plastic slide plates For wood thickness mm Dimensions mm A Housing: Zinc alloy brass plated, Links: Steel brass plate B Housing: Zinc alloy nickel plated, Links: Steel nickel plated C Housing: Stainless steel SUS 16, Links: Stainless steel SUS 16 A B C D E F G A B C FF.84

Concealed mortise hinge non-adjustable For timber frames For flush doors For concealed mounting Max. opening angle: 180º º thicknesses mm Packing: 2 pcs. incl.

13 Concealed mortise hinge non-adjustable For timber frames For flush doors For concealed mounting Max. opening angle: 180º º thicknesses mm Packing: 2 pcs. incl. fixing material Dimensions mm A Housing: Zinc alloy satin chrome B Housing: Zinc alloy brass plated C Housing: Zinc alloy antique brass D Housing: Zinc alloy antique copper A B C D E F G A B C D thickness mm Dimensions mm Material/finish A B C D E F G A B C D FF.85

SEPA Hinge for wood thickness of 24 mm Drilling dimensions

L mm SEPA-MINI Hinge for wood thickness of 12 mm Drilling

of drilled holes 41 2 6 Nickel plated polished Matt 52 4 8

Packing: 1, 10 or 20 pcs. Material: Brass Dim. L mm Dim.

14 SEPA Hinge for wood thickness of 24 mm Drilling dimensions Opening angle: 180 Material: Brass Dim. L mm SEPA-MINI Hinge for wood thickness of 12 mm Drilling dimensions Dim. L1 mm No. of drilled holes Nickel plated polished Matt Nickel plated polished Matt Nickel plated polished Packing: 1, 10 or 20 pcs. Material: Brass Dim. L mm Dim. L1 mm Matt 9 2 Nickel plated polished Packing: 1 or 50 pcs. Matt FF.86

15 ZYSA Hinge for wood thickness of mm Opening angle: 180 Material: Brass : Matt Mounting: For right and left hand use Application Mounting example for butting overlay doors Hinge closed open Hinge Drilling dimensions Drill-hole Ø Ø Mounting example for butting inset doors Hinge closed open Mounting example for butting overlay flaps Shelf Flap closed Example of folding door Mounting example for two panels Panel Flap Panel closed Hinge Hinge Shelf Flap open Panel Panel Hinge Hinge Panel open Hinge Flap Application and planning dimensions For wood thickness mm Screws Ø mm ø Length L mm Drill hole Ø mm ø Drilling depth T mm Dim. A mm Dim. B mm Gap F mm 1 Position is secured by tightening the tensioning screw 2 With extremely heavy loads, each of the cylinders can be secured from the front using a chipboard or wood screw For wood thickness mm Packing: 1, 12, 24 or 48 pcs FF.87

Depth Height adjustment mm, width Height and depth adjustment 1.5 mm.

thickness: 16 22 mm, from 20 mm edge has to be chamfered by about mm Adjusting facility: Three-dimensional 5

16 GS 22.5 and GS 45 Mitred hinges Application example GS mitred hinge 45 Adjustment possibility Height Width panel Depth Height adjustment mm, width Height and depth adjustment 1.5 mm. Material: Zinc alloy cup, steel link arm : Nickel plated For door thickness: mm For side panel thickness: mm, from 20 mm edge has to be chamfered by about mm Adjusting facility: Three-dimensional GS 22.5 Mitred hinge Mounting Drilling dimensions mitre angel 22.5 closed open GS 45 Mitred hinge Drilling dimensions mitre angel 45 Flap Carcase Opening angle Packing: 4 or 20 pcs. Mounting closed open Opening angle Packing: 4 or 20 pcs. FF.88

Three-dimensional Flap Adjusting facility Height Width Carcase Depth Height Opening angle Packing: 4 or 20 pcs.

17 Mitred flap hinge Drilling dimensions mitre cut Mitre angle: 45 Material: Zinc alloy cup, steel link arm : Nickel plated For door thickness: mm For side panel thickness: mm, from 20 mm edge has to be chamfered by about mm Adjustment possibility: Three-dimensional Flap Adjusting facility Height Width Carcase Depth Height Opening angle Packing: 4 or 20 pcs. Note Usable in combination with flap stays only panel Height adjustment mm, width and depth adjustment 1.5 mm Flap Base Flap closed Flap Flap open Base FF.89

Adjusting facility: Three-dimensional Drilling dimensions for cup

18 Corner unit folding door hinge, opening angle 150, gap 4 18 mm Material: Zinc alloy : Nickel plated For door thickness: mm Adjusting facility: Three-dimensional Drilling dimensions for cup Screw fixing Packing: 1 or 100 pcs Adjusting facility closed open FF.90

Glass door hinge for glass thickness 6 10 mm Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg

19 Glass door hinge for glass thickness 6 10 mm Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC : Satin nickel Glass thickness: 6-10 mm Support Supplied with 1 Hinge (for top) 1 Hinge (for bottom) 2 Supports Satin nickel Packing: 1 set FF.91

GLARIOR Glass door hinge, opening angle 95 Area of application: For inset glass doors Material: Zinc alloy For glass thickness: 6 mm Glass door width: max 50 mm Glass door height: max 800 mm to

20 GLARIOR Glass door hinge, opening angle 95 Area of application: For inset glass doors Material: Zinc alloy For glass thickness: 6 mm Glass door width: max 50 mm Glass door height: max 800 mm to bottom and upper shelf, direct fixing to glass door Version: Without catch No drilling in glass necessary Supplied with: Pressure plate Inset mounting Fixing to the glass door 1 Stick pressure plate on in required position 2 Press-fit rotating element Adjust glass door 4 Tighten screws Nickel plated matt Nickel plated polished Chrome plated polished Packing: 1, 10 or 100 pcs. Protective foil Self-adhesive pad Pressure plate Glass door Pressure plate Rotating element FF.92

Glass door hinge, opening angle 170 panel mounting Material: Zinc alloy For door height: Max. 600 mm For door width: Max. 450 mm For glass thicknesses: Max.

21 Glass door hinge, opening angle 170 panel mounting Material: Zinc alloy For door height: Max. 600 mm For door width: Max. 450 mm For glass thicknesses: Max. 5 mm Adjustment possibility: Depth and height adjustment to side panel and direct fixing to glass door With catch No drilling in glass necessary panel mounting Area of application: For overlay glass doors Arm: Cranked Adjustment possibility: Depth adjustment with slot Fixing with additional third screw possible Supplied with: Plastic spacer plate Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs FF.9

22 Inset mounting Area of application: For inset glass doors Arm: Straight Adjustment possibility: Height adjustment with slot Supplied with: Plastic spacer plate Glass door Open Closed Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs Order reference From door height of min. 600 mm a centre hinge must be ordered. Centre hinge, only usable with hinge for inset mounting Area of application: For door heights of 600 mm and above Arm: Straight Adjustment possibility: Height adjustment with slot Open Glass door Closed Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs FF.94

23 Glass door hinge, opening angle 170, with exposed axle Area of application: For inset glass doors Material: Zinc alloy For glass thickness: Max. 5.0 mm to side panel and direct fixing to glass door With catch No drilling in glass necessary Inset mounting Nickel plated polished Black matt Packing: 1 or 50 pairs CLARONDA Glass door hinge, opening angle 105 Inset mounting Area of application: For inset glass doors Material: Brass For glass thickness: 4 6 mm Mounting: For right and left hand use Without catch, with glass aperture and side panel mounted separately removable by means of clamping screw Chrome plated polished Packing: 1 or 10 pcs FF.95

Glass door hinge, opening angle 180, with exposed axle Material: Brass For glass thickness: 6 mm Mounting: For right and left hand use Without catch, with glass aperture panel Brass matt

24 Glass door hinge, opening angle 180, with exposed axle Material: Brass For glass thickness: 6 mm Mounting: For right and left hand use Without catch, with glass aperture panel Brass matt Nickel plated matt Packing: 1 or 20 pcs panel Glass door Closed Glass door Open Glass door hinge, opening angle 90, length 4 mm Glass door panel Closed panel Glass door Open Area of application: For inset glass doors Material: Zinc alloy For door height: Max. 800 mm For door width: Max. 400 mm For glass thickness: Max 6.5 mm Version: With black plastic bushing and rubber buffer : Plug fitting into base and direct fixing to glass door with screw Without catch, no drilling in glass necessary Black matt Packing: 5 or 50 pairs FF.96

SIMPLEX-CLIP Glass door hinge, opening angle 110 Inset mounting Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max. 400 mm For glass thickness: 5.

Packing: 1 or 50 pairs 61.42.221 SIMPLEX Glass door hinge, opening angle 110 6 40 24 7 1 12 2 5 Ø 5 Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max.

25 SIMPLEX-CLIP Glass door hinge, opening angle 110 Inset mounting Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max. 400 mm For glass thickness: 5.0 mm Version: With black plastic bushing and clips : Plug fitting into base and direct fixing to glass door, no tools required Without catch, no drilling in glass necessary Chrome plated polished Packing: 1 or 50 pairs SIMPLEX Glass door hinge, opening angle Ø 5 Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max. 400 mm For glass thickness: Max. 4.7 mm Version: With black plastic bushing : Plug fitting into base and direct fixing to glass door with screw Without catch, no drilling in glass necessary Chrome plated polished Black matt Packing: 1 or 50 pairs FF.97

Glass door hinge, opening angle 180 Inset mounting Area of application: For inset glass doors Material: Zinc alloy For door height: Max. 800 mm For door width: Max.

26 Glass door hinge, opening angle 180 Inset mounting Area of application: For inset glass doors Material: Zinc alloy For door height: Max. 800 mm For door width: Max. 50 mm For door weight: 4 kg For glass thickness: 4 6 mm to side panel and direct fixing to glass door Without catch, no drilling in glass necessary Closed Nickel plated matt Packing: 1 or 10 pcs Open FF.98

Hinges and Flap Fittings

Hinges and Flap Fittings We offers a wide range of options the term is functionality and quality. Contents Concealed Hinges DUOMATIC Concealed hinge DUOMATIC PUSH Concealed hinge PUSH Door opening system