This PDF catalog provides a variety of tools for locating our products. These tools, located to the left of your screen, are called bookmarks.

Transcription

1 Using This Catalog This PDF catalog provides a variety of tools for locating our products. These tools, located to the left of your screen, are called bookmarks. The TABLE OF CONTENTS bookmark contains a complete directory of products listed in alphabetical order. The PART NUMBER INDEX bookmark lists all of our products by their Keystone part number. The PAGE NUMBER INDEX allows you to go directly to any page in our catalog. The ENGINEERING DATA bookmark takes you to a useful reference page which includes the Drill Size Diameter Table, the Millimeter Conversion Table, and the Screw/Stud Clearance Hole Table. The BINOCULAR ICON allows you to search this catalog by part number. Click the icon on the toolbar, type in the part number you are looking for and hit find. Using Bookmarks To open a bookmark directory, click on the + symbol to its left. In the TABLE OF CONTENTS, for example, you will see additional directories labeled A through Z Open the B directory ( + ) and find the product category you are interested in. We ll use BATTERY Contacts & Clips. Open the subcategory Clips to reveal the pages containing battery clips. By selecting page you are brought to page of the catalog, but the TABLE OF CONTENTS bookmark directory will remain on the left-hand side of your screen. This feature allows you to review all pages of the catalog without flipping through it page by page. To close an open bookmark directory, click on the symbol to its left. Note: All bookmark directories will return to their original closed position every time the PDF catalog is closed and reopened.

2

3 CERTI FIED ISO 900 Q U A L I T Y TABLE OF CONTENTS A ADAPTERS, BNC ALLIGATOR CLIPS AUDIO JACKS AUTOMOTIVE BLADE FUSE CLIPS & HOLDERS B BATTERY CONTACTS & CLIPS Clips , 3 PC Mount Snap-On Spring , BATTERY HOLDERS Aluminum , 6-8 Clips Coin Cell (Lithium) Contacts Interconnect Lithium Volt Plastic PC Retainers (Compact Contacts) SMT (Surface Mount) Steel , 8 Straps , 3 Vertical BATTERY SNAPS & STRAPS 9 VOLT Snap-On , Straps , 3 BANANA PLUGS & JACKS , 73 BINDING POSTS BNC ADAPTERS BOARD GUIDES P.C BREAD BOARDS (Micro-Miniature).. 97 BRACKETS (Mounting) , 6 BRACKETS (Computer) BUMPERS ( Rubber) BUSHINGS (Nylon) C CABLE CLAMPS , 86 CABLE TIES CAPS, LED LENS CAPTIVE NUTS CAPTIVE SCREWS , 56 CARD EJECTERS, P.C CASES (Instrumentation) CLIPS Alligator Battery , 3 Fuse COIN CELL BATTERY HOLDERS (Lithium) COMPUTER Brackets Connectors , 67 Jack Screws COMPUTER BRACKETS Worksheet (Custom Design) CONNECTORS F IEEE Modular Terminal Blocks Mounting Hardware Screw Terminals USB CONTACT PINS (Seamless) E EYELETS EYELET STAKING TOOL F FAN/FINGER GUARDS , 59 FIBER WASHERS (Flat & Shoulder).. 90 FIREWIRE PLUGS & SOCKETS FUSE CLIPS & HOLDERS Automotive Blade Clips Holders , 7 G GROMMETS , 85 GUARDS, FAN/ FINGER , 59 H HALOGEN LAMP SOCKET HANDLES, INSTRUMENT HARDWARE Captive Nuts Computer Connector Handle Mounting Screws Insulating Panel Nuts Transistor Mounting HEADERS & HOUSINGS HINGED STANDOFFS HOLE PLUGS I IEEE 394 PLUGS & SOCKETS INSTRUMENT HANDLES INSTRUMENTATION CASES INSULATING HARDWARE Bushings Ceramic Standoffs Fiber Washers Mica Washers Nylon Spacers Nylon Washers Spacer Supports (Nylon) Phenolic Spacers INSTALLATION TOOLS Eyelet Quick-Fit Rivet Solder Terminal , 8, 88, 89 J JACKS Banana Micro Phono Shrouded Test Tip JACK SCREWS K KNOBS L LED HOLDERS LED LENS CAPS LED SPACER MOUNTS M MALE/FEMALE STANDOFFS Aluminum, Brass, Nylon, Stainless Steel M (Cont.) MICA TRANSISTOR INSULATORS... 9 MICRO JACKS MICRO PINS MOUNTING BRACKETS , 6 N NYLON CABLE CLAMPS NYLON SPACERS NYLON STANDOFFS , 48 NYLON WASHERS (Flat & Shoulder). 90 P PANEL BEARINGS PANEL HARDWARE , 56 PHONO PLUGS & JACKS PINS Contact (Seamless) Micro Wire Wrap (.05 Square) PLUGS Banana , 73 Hole Phono Shorting Shrouded Tips & Plugs PUSH-IN TERMINALS Flea Clip, Imp, Micro, Solderless, Tubular Q QUICK-FIT COMPONENTS Boots Headers PC Mount Female Terminals PC Mount Male Terminals , 3 Rivet Type QUICK-FIT INSERTION TOOL R RIVETS RUBBER BUMPERS & GROMMETS , 85 S SCREWS Handle Mounting SCREW TERMINALS SHAFT LOCKS SHORTING PLUG SHOULDER SCREWS SHROUDED PLUGS & JACKS SMT (Surface Mount Components) Audio Jacks Battery Contacts Coin Cell Holders , 8 Coin Cell Retainers Test Points SOCKETS Halogen IEEE Micro Phono Transistor , 93 USB SOLDER TERMINALS , 8 SOLDER LUGS & TERMINALS SPACERS Aluminum, Brass, Nylon, Phenolic , 48 S (Cont.) SPACERS (cont.) LED Worksheet (Custom Design) SPADE BOLTS SQUARE WRAP PINS (.05) STAKING TOOLS STANDOFFS Aluminum, Brass, Ceramic, Flame Retardant, Nylon, Phenolic, Stainless Steel Worksheet (Custom Design) STURDI-MOUNT QUICK-FIT TERMINALS T TAPE & REEL COMPONENTS Battery Contacts Coin Cell Holders , 8 Coin Cell Retainers Test Points TERMINAL BLOCKS TERMINAL BOARDS Military Screw Scored Turret Terminal Quick-Fit TERMINALS Boards Lugs (Solder) Male/Female Quick-Fit Micro Modular Terminal Blocks Push In Screw Solder (Standardized) , 8 Solderless , 79 Strips , 0 Sturdi-Mount Test Points TERMINAL STRIPS Binding Post (Screw Terminal)... 0 Standard & Miniature TEST JACKS TEST POINTS Color Keyed PC Mount , 35 Surface Mount TEST TIPS & PLUGS THUMB SCREWS , 56 TIP JACKS TRANSISTOR SOCKETS , 93 TRANSISTOR SOCKET MOUNTING KITS , 95 TURNABLE JACK SCREWS U USB PLUGS & SOCKETS V VERTICAL COIN CELL HOLDERS W WASHERS Fibre (Flat & Shoulder) Nylon (Flat & Shoulder) WORKSHEETS (Custom) Computer Brackets Spacers & Standoffs All products unconditionally guaranteed against defects in material and workmanship. Keystone components are guaranteed to be free from defects in material and workmanship for a reasonable period of time after delivery. Our liability shall be limited to replacement of defective material only. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential, rising out of the use of or the inability to use the products. Before using, user shall determine the suitability of the product for his intended use, user assumes all risk and liability whatsoever in connection therewith. 4 We reserve the right to change specifications on any and all items shown in this catalog or any supplements without prior notice providing the performance or appearance will not change the function of the item. Keystone has carefully prepared the catalog specifications contained herein. These specifications are for reference only, any inaccuracies may be due to typographical errors or changes made after the publication of this catalog. Copyright 999 by Keystone Electronics Corp. Printed in U.S.A. FEDERAL SUPPLY CODE FSCM

4 BATTERY HARDWARE keyelco.com HOLDERS, CLIPS, CONTACTS, ACCESSORIES Keystone offers the most complete, proven line of battery holders, components and hardware worldwide. Designed and engineered for equipment manufacturers who produce electronic instruments, apparatus and systems, the prime feature of our products is their high reliability. They maintain constant spring tension, assuring low contact resistance. This makes them ideally suited for applications such as electronic components, computers, office equipment, home and industrial controls, appliances, power tools, automotive, medical and defense electronics. Pioneering new products to high standards of engineering excellence, our expertise is exemplified by the broad range of battery components we manufacture. We offer aluminum, steel and plastic holders; a wide range of clips, contacts and accessories, molded and stamped coin cell holders, battery connectors and battery snap-ons. All are available in stand alone and PC board configurations. Our battery holders, components and hardware will accommodate A AA AAA AAAA N C D 9 Volt Button and Coin Cell sizes, in the complete range of energy systems - Alkaline, Lithium, NiCd, NiMH and Zinc type batteries. Custom designs and variations of our standard parts can be manufactured to meet your specific requirements. 5

5 CERTI FIED ISO 900 Q U A L I T Y COIN CELL PC BATTERY HOLDERS 0mm to 30mm Sizes mm to 6mm & /3 N Sizes SINGLE CELL HOLDER (3-VOLT) DUAL CELL HOLDER (6-VOLT) Single and Dual Printed Circuit Cell Holders for Lithium Coin Cells. Designed for easy battery replacement. Will accommodate diameters from mm to 30mm and heights from.6mm to 7.7mm. Some holders will accept more than two cells if they fall within the heights specified. IDEALLY SUITED FOR Duracell, Eveready, Panasonic, Ray-O-Vac, Sanyo, Varta, Toshiba, Seiko and other major battery manufacturers Computer memory, power transfer and back-up systems Video and telecommunications power back-up Preprogrammed video and electronic games Microprocessors and Microcomputer memory hold Notebook and laptop applications Emergency power systems Industrial and commercial security and alarm systems Communications power sources Miniaturized battery power devices DESIGN ADVANTAGES Low profile for high density packaging Reliable spring tension assures low contact resistance Retains battery securely to withstand shock and vibration Unique notched slots assure quick and easy battery insertion and replacement Base material UL Rated 94V-0. Impervious to most industrial solvents Operating temperature range: -60 F to +93 F (-50 C to +45 C) Advanced air-flow design pattern enhances air circulation around battery Nickel-over-copper plated spring steel contacts feature clearly marked polarities to help guard against improper insertion DWG. DWG. DIMENSIONS BATTERY CROSS REFERENCE DWG. N0. OF DURACELL, EVEREADY, PANASONIC, RAY-O-VAC NO. CELLS A B C D E L O.D. M CELL SANYO, SONY, SEIKO, TOSHIBA, VARTA /3N } DL /3N, K58L, CR /3N mm BR6, CR6, BR0, CL0, CR0, BR mm } BR66, CR6, CR66, CR60, CR BR06, CR06, DL06, BR00, CL00, BR05, mm CR05, DL05, BR03,CR03, DL } BR30, CL30, CR30, BR35, CR35, DL35, mm BR330, CL330, BR335, CR354** mm } CR430, DL430, CR450*, DL450*, CR mm BR303 * For Cat. No.05 () cell only. ** For Cat. No. 07 () cell only. For Cat. No only. } 6

6 COIN CELL BATTERY HOLDERS keyelco.com VERTICAL 0mm COIN CELL HOLDERS COMPACT This space saving vertical design features a rugged, lightweight body that mounts squarely and securely on PC boards for easy installation and replacement of batteries. Reliable spring tension assures low contact resistance. Accepts all major manufacturers 0mm diameter batteries Molded notch prevents improper insertion of 03 size cells Space saving design for high density packaging Retains cells securely, withstands shock and vibration Polarity clearly marked Mounts securely for wave soldering Temp range -60 F to +93 F (50 C to +45 C) SLIMLINE A unique space saving design. The battery is installed vertically from the top. The contacts of this holder are polarized to assure proper continuity and circuit protection. Polarized holder Mounts securely for wave soldering Reliable spring tension assures low contact resistance Retains 0mm batteries securely to withstand shock and vibration Temp range -60 F to +93 F (50 C to +45 C) Contacts:.0 Spring Steel, Tin over Nickel Plate Base: PBT, UL Rated 94V Contacts:.06 Spring Steel, Tin over Nickel Plate Base: PBT, UL Rated 94V COMPACT 0mm COIN CELL HOLDER The Ultimate in space saving design. This 0mm coin cell holder allows pop-in entry of batteries using the minimum amount of space. Finger pressure lever allows batteries to disengage from holder. Suitable for 05 and 03 cells Pop-in design using minimum space Finger pressure lever disengages battery Reliable spring tension assures low contact resistance Contacts:.0 Phosphor Bronze, Tin Plate Base: Glass Filled Nylon, UL Rated 94V Retains batteries securely to withstand shock and vibration Temp range -60 F to +93 F (50 C to +45 C) SURFACE MOUNT COIN CELL HOLDERS Available on Tape and Reel SMT Design - Holders for 0mm and 3mm Lithium Coin Cell Batteries Temp. range -60ºF to +540ºF (-50ºC to +8ºC) Low profile for high density packaging Ideal for memory back-up applications SMT solder tail with Flow-Hole design for Polarity clearly marked (+) increased joint strength UL approved material, 94V-0 Viewable solder tails assures reliable joint inspection Rugged construction, light weight Safe for all soldering & reflow operations Compatible with vacuum and mechanical All conductive polystyrene carrier tape meets ANSI/EIA pick & place assembly systems - 48 standard SMALL PAD PATTERN ON TAPE CELLS A B C D E CELL BATTERY 06 06TR *, 00, 0mm 06 06TR , TR mm 30, 35, 330 *Cat. No. 06 ( or cells); Cat. No. 06 (3 cells) LARGE PAD PATTERN ON TAPE CELLS A B C D E CELL BATTERY TR *, 00, 0mm TR , TR mm 30, 35, 330 *Cat. No. 063 ( or cells); Cat. No. 064 (3 cells) Pad Layout : Contacts:.05 Steel, Tin Plate Base: Nylon, Stanyl-46 Tape & Reel Spec s: 44mm wide; 3mm pitch; 3 inch reel (00 pieces per reel) 7

7 CERTI FIED ISO 900 Q U A L I T Y COIN CELL RETAINERS & HOLDERS SURFACE & THRU HOLE MOUNT COIN CELL RETAINER CONTACTS ULTRA-LOW PROFILE! Available on Tape and Reel COMPACT CONTACTS Economical and reliable retainer contacts are designed for quick and easy battery installation and replacement. Perfect for memory back-up applications. Surface and thru hole mount retainer contacts are available for 6.8mm to 4mm lithium coin cell batteries. Low profile for densely packed PCBs Retains cell securely, withstands shock & vibrations Reliable dual spring contacts assure low contact resistance Polarity clearly marked (+) Stable thru mount legs for increased strength Balanced & lightweight for reliable pick-up & placement Compatible with vacuum and mechanical pick & place assembly systems Flow-Hole SMT solder tail design for increased joint strength Viewable solder tails assures reliable joint inspection All conductive polystyrene carrier tape meets ANSI/EIA - 48 standard For 6.8mm Dia. Button Cell New Pad Layout New New New New New New New Also Available: Optional negative bottom contact. (Cat. No. 990, see page 9) DWG. - SURFACE MOUNT (SMT) :.00 Phosphor Bronze, Nickel Plate DWG. - THRU HOLE MOUNT (THM) :.00 Phospher Bronze, Nickel Plate CAT. ON TAPE DWG. MTG. H CELL NO. & REEL NO. TYPE A B C D E F G DIA. DIA. BATTERY REFERENCE TAPE & REEL SPEC S.070 4mm wide; mm pitch; TR SMT mm MC6, V364, SC6 } 3 inch (50 pieces per reel) TR SMT mm BR6, CR6, BR0, 3mm wide; 6mm pitch; 300 THM } CL0, CR0, BR5 3 inch reel (000 pieces per reel) 30 30TR SMT mm BR66, CR6, CR66, 44mm wide; 4mm pitch; 303 THM } TR SMT mm } CR60, CR63 3 inch reel (600 pieces per reel) BR06, CR06, DL06, BR00, CL00, BR05, 44mm wide; 4mm pitch; 3003 THM CR05, DL05, DR03, 3 inch reel (500 pieces per reel) CR03, DL TR SMT BR30, CL330, CR30, 56mm wide; 3mm pitch; 3mm 3005 THM } BR35, CR35, DL35 3 inch reel (400 pieces per reel) TR SMT mm wide; 3mm pitch 3mm CR354, DL THM } 3 inch reel (00 pieces per reel) TR SMT mm 3007 THM TR SMT }} 56mm wide; 3mm pitch; CR430, DL430 3 inch reel (400 pieces per reel) 4mm CR450, DL450 56mm wide; 3mm pitch; 3009 THM inch reel (00 pieces per reel) LOW PROFILE SURFACE & THRU HOLE MOUNT COIN CELL HOLDERS Designed for quick and easy installation and replacement of 03 coin cell lithium batteries. The contacts of these holders are polarized to assure proper continuity and circuit protection. Thru Hole Mount 059 (Bulk) Polarized Holder Retains cell securely to withstand shock and vibration Reliable dual spring contacts assure low contact resistance Low Profile for densely packaged PCB s Compatible with vacuum and mechanical pick & place assembly systems Conductive polystyrene carrier tape meets ANSI/EIA 48 standard Contacts:.006 Phosphor Bronze, Electro-Solder over Nickel Plate Base: Glass Filled LCP, UL Rated 94V (Bulk) Surface Mount Pad Layout 060TR (Tape & Reel) Tape & Reel Spec s: 44mm wide; 4mm pitch; 3 inch reel (500 pieces per reel) 8

8 BATTERY CONTACTS keyelco.com A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.06 and.093 size batteries. thick PC boards Space saving design installs directly onto Reliable spring and/or button assures low the PC board contact resistance Ideal for self-contained battery compartments + - : Frame:.05 Steel, Tin Plate : Frame:.05 Steel, Tin Plate Uses Cat. No. Spring Contact (+) Positive Button (-) Negative Spring For A For AA AAA N 68 - For A 69 - For AA AAA N SURFACE MOUNT BATTERY CONTACTS For AAA AAAA Economical & reliable contacts are ideal for surface mount applications Unique spring tension contacts adjust to variations in battery length Reliable spring tension contacts assure low contact resistance SMT solder tail with flow-hole design for increased joint strength :.00 Spring Steel, Nickel Plate For A AA 9V TR Tape and Reel Spec s: 4mm wide; mm pitch; 3 inch reel (400 pieces per reel) 53 53TR Tape and Reel Spec s:3mm wide; mm pitch; 3 inch reel (400 pieces per reel) ECONOMICAL SPACE SAVING PC BATTERY CONTACTS Ideal for self-contained battery compartments Contact us for modifications and custom design Thick, Phospher Bronze, Nickel Plate Thick, Spring Steel, Nickel Plate Thick, Spring Steel, Nickel Plate Thick, Spring Steel, Nickel Plate Thick, Spring Steel, Nickel Plate Thick, Spring Steel, Nickel Plate 9

9 CERTI FIED ISO 900 Q U A L I T Y BATTERY CONTACTS BATTERY SPRING & BUTTON CONTACTS Economical and reliable contacts are ideal for molded cases with self contained battery compartments Single and dual contact designs available for A, AA, AAA, AAAA & N size batteries Solder tab design for either wire lead or PC mounting Unique spring contacts adjust to variations in battery lengths Reliable spring contacts assure low contact resistance and a dependable connection Space saving, economical, excellent mechanical construction SPRING CONTACT FOR A AA 9V SIZES :.0 Phosphor Bronze, Nickel Plate 509 BATTERY CONTACTS FOR A AA SIZES Dual Contact w/tabs Dual Contact : Plate:.00 Steel, Nickel Plate Spring: Spring Steel, Nickel Plate 5 5 (+) Positive Button (-) Negative Spring (+) Positive Button w/tabs (-) Negative Spring/w/Tabs BATTERY CONTACTS FOR AAA AAAA N SIZES (+) Positive Button (-) Negative Spring : Plate:.00 Steel, Nickel Plate Spring: Spring Steel, Nickel Plate Dual Contact (+) Positive Button w/tabs (-) Negative Spring w/tabs 54 (Left Side) 0 53 (Right Side)

10 BATTERY CONTACTS keyelco.com SNAP-ON CONTACTS FOR A AA AAA AAAA N SIZES For A AA Economical and reliable contacts are ideal for molded cases with self contained battery compartments Single & dual contact designs available for A AA AAA AAAA N size batteries Solder ear to facilitate soldering of wire lead Unique spring tension contact adjusts to variations in battery length Reliable spring tension contacts assure low contact resistance Clips easily onto.060 to.070 thick panel edges Sharp barbs securely anchor contact in place 0 For A AA :.0 Spring Steel, Nickel Plate For A AA 88 :.0 Spring Steel, Nickel Plate For A AA 09.0 Spring Steel, Nickel Plate For A AA 90 - Left (shown) 9 - Right :.0 Spring Steel, Nickel Plate 8.00 Spring Steel, Nickel Plate For A AA For AAA AAAA N 04 For AAA AAAA N.00 Spring Steel, Nickel Plate 9 For AAA AAAA N :.00 Spring Steel, Nickel Plate Spring Steel, Nickel Plate 0 :.00 Spring Steel, Nickel Plate

11 CERTI FIED ISO 900 Q U A L I T Y BATTERY CLIPS & CONTACTS SNAP-IN PC BATTERY CLIPS FOR A AA AAA AAAA N SIZES Available for A AA AAA AAAA N size batteries Mounts securely to the PC board with advanced Snap-In design for thru hole mounting Snap-In clip holds firmly for wave soldering Reliable spring tension assures low contact resistance Low profile, economical design Retains battery securely to withstand shock and vibration New : Spring Steel, Nickel Plate CAT. BATTERY BATTERY MAT L NO. SIZE DIA. A B C H L THICK 5 A AA No Ears A AA A AA AAA N AAAA See drawing below.00 No Ears SURFACE MOUNT BATTERY CLIP For AAA N Low profile for densely packed PCBs Flow-Hole SMT solder tail design for increased joint strength Retains cell securely, withstands shock and vibration All conductive polystyrene carrier tape meets ANSI/EIA -48 standard AAAA :.00 Spring Steel, Nickel Plate 5 ECONOMY CLIPS FOR AA C D SIZES Designed for mounting in self-contained, non-metallic battery compartments. Reliable spring tension assures low contact resistance. Recessed contact holds battery in place. All clips have anti-rotation tab. :.06 Spring Steel, Nickel Plate Mounting Detail Pad Layout 55 (Bulk) 55TR (Tape and Reel) :.00 Spring Steel, Tin Plate Tape & Reel Spec s: 3mm wide; 6mm pitch; 3 inch reel, (300 pieces per reel) BATTERY RETAINER CLIPS Prevents battery from loosening in battery holder Retainer clip slips on the ears of the battery holder clip Manufactured from Spring Steel, Nickel plate Retainer for "AA" or cells with diameters of.53" to.56". Used with Keystone Battery Clips Cat. No. 9, 9, 9-05, 95, 99 and 00. Retainer for "C" cells or similar size batteries to.03" diameter. Used with Keystone Battery Clips Cat. No. 86, 87, 93 and. Retainer for "D" cells or similar size batteries to.343" diameter. Used with Keystone Battery Clips Cat. No. 88, 89 and 94. FIG. FIG. CAT. FIG. M CELL NO. NO. B C H MTG. HOLE SIZE AA C D BATTERY SPRING CONTACTS Easy to assemble with eyelets or rivets. (FRONT) CONTACT For A AA C D Sizes (BACK) CONTACT H A B C ( A AA ) Dia. Spring Steel, Nickel Plate -D ( C D ) Dia. Spring Steel, Nickel Plate

12 BATTERY & COMPONENT CLIPS keyelco.com STEEL SPACE SAVER BATTERY CLIPS FOR "AA" "C" "D" SIZES IDEAL FOR CARBON ZINC NiCd NiMH LITHIUM ALKALINE BATTERIES Available with insulated or non-insulated contact. Positive contact grips battery securely. Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate Insulating Washers: Moisture Proof, Resin Impregnated Fibre Terminal Lugs: Brass, Tin Plate ±.05 ±.00 ±.05 ±.05 ±.005 ±.00 ±..005 ±.005 ±.05 STEEL CAT. NO. FIG. NO. CONTACT A DIA. MIN.- MAX. FOR CELLS B C D F G H J K M THICK- NESS 86 NON-INSULATED.875 to.5 C INSULATED.875 to.5 C INSULATED.87 to.350 D NON-INSULATED.87 to.350 D NON-INSULATED.53 to.650 AA INSULATED.53 to.650 AA FIG. NO. NON-INSULATED CONTACT FIG. NO. INSULATED CONTACT BOTTOM VIEW BOTTOM VIEW ALUMINUM & STEEL COMPONENT CLIPS FIG. FIG. FIG.3 FIG.4 FIG.5 Precision made spring clips are available in a wide range of sizes. These clips will hold round, square and rectangular batteries or components with similar dimensions. Clips are manufactured from Aluminum or Spring Steel. Steel Clips: Spring Steel, Nickel Plate Aluminum Clips: 04-T3 *These clips will hold batteries or components of similar dimensions. A ±.005 ±.005 ±.005 ±.005 ±.00 ±.05 ±.003 CAT. FIG. MIN MAX DIA. *FOR B C D F G H M NO. NO. OR SIZE CELLS MTG HOLES CRYSTAL #5(.067).06 Steel () () AA #40(.098).05 Steel () () RM #40(.098).05 Alum VOLT #40(.098).05 Steel to.350 D #9(.36).00 Steel TR46X #40(.098).05 Steel VOLT #40(.098).05 Steel 90 to.468 AAA #40(.098).00 Alum to.656 AA #40(.098).00 Alum to.5 C #40(.098).00 Alum to D #40(.098).03 Alum VOLT #40(.098).00 Alum () () C #40(.098).00 Alum () () D #40(.098).03 Alum. 7 to NiCd #(.57).05 Steel to.687 NiCd #(.57).05 Steel to NiCd #(.57).05 Steel 0.87 to.03 5mm #4(.093).00 Steel.859 to #(.57).00 Steel.875 to.5 C #40(.098).00 Steel 3

13 CERTI FIED ISO 900 Q U A L I T Y An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening of the batteries. Recommended for use where shock or severe vibration is encountered. Special fabrication for more than four batteries or variations from standard stock parts can be assembled to meet your requirements. STEEL BATTERY HOLDERS RUGGED STEEL BATTERY HOLDERS INSULATOR TUBES SUPPLIED FOR -3-4 CELLS END TO END Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells Corrosion Resistant, Nickel Plate Brass Contacts, Nickel Plate Moisture Proof Resin Impregnated, Fibre Insultating Washers FIG. 9 FIG. 0 FIG. FIG. PHENOLIC BASE 00 SERIES 00 SERIES (GROUNDED ONE SIDE) (FULLY INSULATED) FIG. 3 FIG. 4 PHENOLIC BASE FIG. 5 DIMPLE INSULATED INSULATED CONTACT CONTACT CONTACTS MODIFICATIONS AVAILABLE Use our engineering services for your custom battery holders or modifications to our standard products SERIES SERIES ONE CONTACT ALL CONTACTS HOLDS INSULATED INSULATED FIG. NO.OF NO. CELLS AA CELL HOLDERS * 3 7* 4 3 8* C CELL HOLDERS * 3 87* * D CELL HOLDERS * 3 90* 4 3 9* *Clips mounted on Phenolic /6 thick BATTERY CROSS REFERENCE All Batteries listed within boxes are in the same size group EVEREADY DURACELL RAY-O-VAC NEDA E9, EV5, EN9, CH5, E33, E33N, E77, 505, 53, 05,5 CH35, E93, 935, 35, EV35, EN93 CH50, E95, 950, 50, EV50, EN95 ( BATTERY.53 O.D..906 H) SIZE ZM9, RMR, NC5AA, M5F, M5AA, TR33R, TR77, M505, MN500, PC500 M4F, M4HD, NC4C, TR86, MN400, PC400 M3F, NC3D, S4, M3HD, TR89, MN300, PC300 5AA, 65, 85, 7AA ( BATTERY.875 O.D..875 H) SIZE C, 64, 84 ( BATTERY.87 O.D..3 H) SIZE.4 D, 6D, 63, 83 5,5A,5C, 5D,5F, 5M,5NC,,0M, 3M, 306AP, 306M, 34M,606M 4A, 4C, 4D,4F, 4NC, 600M 3A, 3C, 3D, 3F, 3NC, 5M, 80M JUMPERS Jumpers permit cost saving and eliminates wiring. SPECIAL LUGS Printed Circuit, Solderless or Quick-Fit Lugs available for your special connection requirements. MULTIPLE UNITS Jumpers, special lugs and polarized contacts available for custom applications. POLARIZED CONTACTS Assure proper battery insertion and correct polarity. INSULATED POLARIZING WASHERS Prevents improper connection of battery which may cause damage to electronic equipment. Washers hold securely when snapped over eyelets. Used on our standardized battery holders. For AA, C & D cells. : Molded Polyethylene 59 (RED) 60 (BLACK) 4

14 STEEL BATTERY HOLDERS keyelco.com Clips: Spring Steel, Nickel Plate Terminal Lugs: Brass, Tin Plate Contact Eyelets: Brass, Nickel Plate Phenolic Base: Type PBE, Per MIL-P-35C Insulating Washers: Moisture Proof, Resin Impregnated Fibre Base: Ribbed Stainless Steel, For Added Support DIMENSIONAL DRAWINGS FOR STEEL BATTERY HOLDERS FIG. FIG. FIG. 3 Stainless Stainless Steel Base, Steel Base Steel Base Nickel Plate FIG. 4 FIG. 5 FIG. 6 Steel Base, Steel Base, Steel Base, Nickel Plate NIckel Plate Nickel Plate FIG. 7 FIG. 8 FIG. 9 #8 DRILL.40 DIA. 4 HOLES #8 DRILL.40 DIA. 6 HOLES #8 DRILL.40 DIA. 8 HOLES FIG. ±.005 ±.05 ±.00 ±.05 ±.00 ±.00 A B C D F H * * * * * * * * * * * * * * * * * * * * FIG. ±.005 ±.05 ±.00 ±.05 ±.00 ±.00 ±.005 A B C D F H J * * * * * * * * *Special order only. Dimensions B, D, F, H should be used for reference 5

15 CERTI FIED ISO 900 Q U A L I T Y ALUMINUM BATTERY HOLDERS A standard line of battery holders available for immediate shipment from stock. Low cost, lightweight and sturdily constructed of quality materials. Good electrical contact, low leakage current and snap-fit clips are the outstanding features. MODIFICATIONS: We welcome the opportunity to quote on variations of standard items. Use our engineering service for your special custombuilt holders. Holders with PC and Quick-Fit terminals available on special order. Brass Eyelets, Nickel Plate Brass Lugs, Nickel Plate Moisture Proof, Resin Impregnated, Fibre Insulating Washers Aluminum 04-T3, Frame & Clip FIG. FIG. FIG. 3 FIG. 4 FIG. 5 FIG. 7 FIG. 8 FIG. FIG. 9 FIG. 0 FIG. FIG. 4 POLARTIY INDICATING LABEL No Gluing or Wetting Needed Pressure Sensitive Adhesive Back Economical Adheres To All Surfaces Recommended where proper polarity of battery insertion or circuit polarity is to be shown. Labels are two color, (+) positive side red; arrow, (-) negative side blue. 58 l + 3 /8 /4 DIMENSIONAL DRAWINGS ON THE FOLLOWING PAGE HOLDS OF FIG. NO. CELLS NO. AAA CELL HOLDER B 73P 03P AA CELL HOLDERS C CELL HOLDERS D CELL HOLDERS N CELL HOLDERS Ideal for Alkaline, Carbon, Zinc, NiMH NiCd and Lithium Cells * 3 5 7* 8 * 3 5 7* 8 * 3 9 VOLT BATTERY HOLDERS 0 REF. PAGE 5 VOLT BATTERY HOLDERS / VOLT BATTERY HOLDERS VOLT BATTERY HOLDERS 4 * C Cell Holders-Dual Cat. No. 97 clips used D Cell Holders-Dual Cat. No. 98 clips used BATTERY CROSS REFERENCE All Batteries listed within boxes are in the same size group EVEREADY DURACELL RAY-O-VAC ( BATTERY SIZE.468 O.D H) E9, 9, CH E9, EV5, EN9, CH5, E9, E33, E33N, E77, 505, 53, 05, 5 CH35, E93, 935, 35, EV35, EN93 CH50, E95, 950, 50, EV50, EN95 E90, E340E, E40E, EP40E 06 6 CH,EN, E46X,6, 5,, E M4F, MN400 ZM9, RMR, NC5AA, M5F, M5AA, TR33R, TR77, M505, MN500, PC 500 M4F, M4HD, NC4C, TR86, MN400, PC400 M3F, NC3D, S4, M3HD, TR89, MN300, PC300 MP40H M6 TR46X, M604, M604HD, MN604, PC46X, PC604 M5 C, 64, 84 D, 6D, 63, 83 R40, RP40, 80 A604, D604, 604 NEDA 84 4A, 4F, 4P ( BATTERY.53 O.D..906 H) SIZE AA, 65, 85, 7AA ( BATTERY.875 O.D..875 H) SIZE ( BATTERY.87 O.D..3 H) SIZE.4 ( BATTERY O.D..0 H) SIZE , 5A,5C, 5D,5F, 5M, 5NC,, 0M,3M, 306AP, 306M, 34M,606M 4A,4C, 4D,4F, 4NC, 600M 3A,3C, 3D,3F, 3NC, 5M, 80M 90A, 90F, 90M,7M, 8M MN ,604A, 604C,604D, 604M, 604NC, 69M

16 ALUMINUM BATTERY HOLDERS keyelco.com Insulating Washers: Moisture proof, resin impregnated fibre Frame and Clips: Aluminum 04-T3 Terminal Lugs: Brass, Tin Plate Contact Eyelet: Brass, Nickel Plate FIG. FIG. FIG. 3 FIG. 4 FIG. 7 FIG. 8 FIG. 9 FIG. 5 FIG. 6 CAT. FIG. ±.00 ±.05 ±.00 ±.05 ±.00 ±.00 ±.05 ±.005 ±.00 MTG HOLES NO. NO. A B C D F G H J K M ±.003 * #30(.8 Dia) * #30(.8 Dia) #34(. Dia) * #34(. Dia) * #30(.8 Dia) #34(. Dia) #8(.40 Dia) #34(. Dia) #8(.40 Dia) #34(. Dia) #30(.8 Dia) #34(. Dia) * #34(. Dia) * #8(.40 Dia) * #8(.40 Dia) * #8(.40 Dia) * #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) * #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #30(.8 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) * #30(.8 Dia) #8(.40 Dia) #34(. Dia) #8(.40 Dia) #8(.40 Dia) #30(.8 Dia) #8(.40 Dia) #30(.8 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) #8(.40 Dia) 03P #30(.8 Dia) #8(.40 Dia) * #34(. Dia) * #8(.40 Dia) #30(.8 Dia) #30(.8 Dia) FIG. 0 *Special order only Dimensions are for reference only 7

17 CERTI FIED ISO 900 Q U A L I T Y INTERCONNECT BATTERY HOLDERS ELIMINATES WIRING LABOR SAVING Features pre-connected jumper strap insulated from the Aluminum base. Batteries held in series circuit without need of additional wiring. FIG. FIG. 3 ALUMINUM HOLDERS CONNECTED IN SERIES FIG. 4 ELIMINATES WIRING LABOR SAVING For printed circuitry we have standardized our most popular holders with PC Lugs. Choice of single or multiple holders AA and C assembled with Cat. No. 400 lug. D assembled with Cat. No lug. ELIMINATES WIRING LABOR SAVING For printed circuitry we have standardized our most popular holders with PC Lugs. Choice of single or multiple holders AA and C assembled with Cat. No. 400 lug. D assembled with Cat. No lug. FIG.3 FIG. FIG. FIG.4 HOLDS OF FIG. NO. CELLS NO. ALUMINUM HOLDERS WITH PC LUGS STEEL HOLDERS WITH PC LUGS BATTERY CROSS REFERENCE All Batteries listed within boxes are in the same size group EVEREADY DURACELL RAY-O-VAC NEDA AA CELL HOLDERS ( BATTERY SIZE O.D H) C CELL HOLDERS D CELL HOLDERS HOLDS OF FIG. NO. CELLS NO. C CELL HOLDERS 4 5 D CELL HOLDERS 6 7 E9, EV5, EN9, CH5, E33, E33N, E77, 505, 53, 05, 5 CH35, E93, 935, 35, EV35, EN93 CH50, E95,950, 50, EV50, EN95 ZM9, RMR, NC5AA, M5F, M5AA, TR33R, TR77, M505, MN500, PC500 M4F, M4HD, NC4C, TR86, MN400, PC400 M3F, NC3D, S4, M3HD, TR89, MN300, PC300 5AA, 65, 85, 7AA C, 64, 84 D, 6D, 63, 83 BATTERY CROSS REFERENCE All Batteries listed within boxes are in the same size group 5, 5A, 5C, 5D, 5F, 5M, 5NC,, 0M, 3M, 306AP, 306M, 34M, 606M 4A, 4C, 4D, 4F, 4NC, 600M 3A, 3C, 3D, 3F, 3NC, 5M, 80M EVEREADY DURACELL RAY-O-VAC NEDA AA CELL HOLDERS ( BATTERY SIZE O.D H) E9, EV5, ZM9, RMR, NC5AA, EN9, CH5, E33, M5F, M5AA, TR33R, 5AA, 3 E33N, E77, 505, TR77, M505, MN500, 65, 53, 05, 5 PC500 85, 7AA C CELL HOLDERS D CELL HOLDERS CH35, E93, 935, 35, EV35, EN93 CH50, E95,950, 50, EV50, EN95 M4F, M4HD, NC4C, TR86, MN400, PC400 M3F, NC3D, S4, M3HD, TR89, MN300, PC300 C, 64, 84 D, 6D, 63, 83 5, 5A, 5C, 5D, 5F, 5M, 5NC,, 0M, 3M, 306AP, 306M, 34M, 606M 4A, 4C, 4D, 4F, 4NC, 600M 3A, 3C, 3D, 3F, 3NC, 5M, 80M BATTERY CROSS REFERENCE HOLDS All Batteries listed within boxes OF FIG. are in the same size group NO. CELLS NO. EVEREADY DURACELL RAY-O-VAC NEDA AA CELL HOLDERS ( BATTERY SIZE O.D H) 8 3 E9, EV5, ZM9, RMR, NC5AA, 5, 5A, 5C, 5D, 5F, EN9, CH5, E33, M5F, M5AA, TR33R, 5AA, 5M, 5NC,, 0M, 9 4 E33N, E77, 505, TR77, M505, MN500, 65, 3M, 306AP, 306M, 53, 05, 5 PC500 85, 7AA 34M, 606M CH35, E93, 935, 35, EV35, EN93 CH50, E95,950, 50, EV50, EN95 M4F, M4HD, NC4C, TR86, MN400, PC400 M3F, NC3D, S4, M3HD, TR89, MN300, PC300 ( BATTERY.875 O.D..875 H) SIZE ( BATTERY.87 O.D..3 H) SIZE.4 ( BATTERY.875 O.D..875 H) SIZE ( BATTERY.87 O.D..3 H) SIZE.4 ( BATTERY.875 O.D..875 H) SIZE C, 64, 84 ( BATTERY.87 O.D..3 H) SIZE.4 D, 6D, 63, 83 4A, 4C, 4D, 4F, 4NC, 600M 3A, 3C, 3D, 3F, 3NC, 5M, 80M 8

18 LITHIUM BATTERY HOLDERS keyelco.com PLASTIC PC BATTERY HOLDERS FOR / AA AA /3 A SIZES Base: Glass Filled Nylon, UL Rated 94V-0 Retainer Cover: PBT, UL Rated 94V-0 Contacts:.0 Spring Steel Plating: Bright Tin over Nickel over Copper DIMENSIONS MTG. HOLES HOLDER COVER SIZE A & TYPE (MAX) B C D E L W BATTERY CROSS REFERENCE 08 08C / AA C AA C RETAINER COVER FOR 08C, 08C or 09LC RETAINER COVER FEATURES Snap-In PC contact holds in position for wave solderability Tin over Nickel Plated contacts for excellent soldering Polarity clearly marked for orientation Low Profile, space-saving Snap-on retainer cover (optional) retains battery securely to withstand shock and vibration. Helps protect against shorting. Tamper-proof. APPLICATIONS Computer memory, power transfer and back-up systems Video and telecommunications power back-up requirements Preprogrammed video and electronic games Microprocessor, microcomputers, minicomputers, notebook, laptop and handheld computer memory hold applications Emergency power systems Residential, industrial and commercial security and fire alarm systems Eveready 544, Duracell PX8L, Kodak K8A & KS8, Panasonic CR450, Saft LCP3, Electrochem 3B955, Maxell 4LR44, Sanyo CR450SE. Eveready E9, EV5, E9, E77, 505, 05. Duracell ZM9, NC5, M5F, TR77, M505, MN500, PC500. Panasonic UM-3 & P-45AA. Sanyo N-600AA & N-700AA. Rayovac 5AA, 7AA, 65, C /3 A LC 6 VOLT LITHIUM BATTERY HOLDERS FOR DURACELL DL3A OR EQUIVALENT BATTERIES Duracell DL/3A, Electrochem 3B793 & 3B950, Panasonic CR3A, Saft 450SC & VR0450, Sanyo CR7335SE, Kodak K3L. LITHIUM BATTERY HOLDERS PC PLASTIC HOLDER Quick Fit/Solder Lug Terminals PC Board Terminals Lightweight, ideal for rugged applications Frame: Aluminum 04-T3 Spring Contacts:.05 Dia. Spring Steel, Nickel Plate Terminals: Brass, Tin Plate FIG. STANDARD LUGS FIG. - ALL STEEL HOLDER PC LUGS FIG. 3 - ALL STEEL HOLDER FIG. 4 - ALUMINUM HOLDER FIG. 5 - ALUMINUM HOLDER 4 3 PC Terminals Quick-Fit/Solder Lug CAT. NO FIG. FIG. BATTERY BATTERY DURA- PANA- SANYO STD LUGS NO. PC LUGS NO. SIZE DIA. CELL SONIC G.E. 08 /AA.5.99 P 8L CR450 CR450SE /AA.5.99 P 8L CR450 CR450SE /A BR-/A 09 /3A DL-/3A BR-/3A CR7335SE /3A DL-/3A BR-/3A CR7335SE 9

19 CERTI FIED ISO 900 Q U A L I T Y PLASTIC BATTERY HOLDERS PLASTIC BATTERY HOLDERS FOR AA AAA SIZES Economical design, available with PC terminals or wire leads Batteries securely held in place to assure a positive connection and maintain a low contact resistance Contact springs self-adjust to variations in battery length Withstands shock and vibration Available with solder lugs or male/female snap fasteners Holder: Polypropylene Springs: Spring Steel, Nickel Plate PC Pins:.03 Brass, Nickel Plate Wires (Red & Black): #6AWG, Tinned,.87 end strip UL/CSA007 Holds One () AA Cell Holds Two () AA Cells in Series Holds Three (3) AA Cells in Series Holds Four (4) AA Cells in Series 460 PC Mount 46 6 Wire Leads 46 PC Mount Wire Leads 464 PC Mount Wire Leads 477 PC Mount Wire Leads Holds One () AAA Cells Holds Two () AAA Cells in Series Holds Three (3) AAA Cells in Series Holds Four (4) AAA Cells in Series 466 PC Mount Wire Leads 468 PC Mount Wire Leads 479 PC Mount Wire Leads 48 PC Mount 48 6 Wire Leads AA SIZE BATTERY HOLDERS WITH SNAP-ON CONNECTOR Features separable snap-on/snap-off battery connector (9 Volt type) to assure reliable connections to battery powered equipment, controls and systems Economical design, holders available for two, three or four cells. Wired in series to accept connector (9 Volt type) Batteries securely held in place to maintain a positive contact and a low contact resistance Battery contact springs self adjust to variations in battery length Withstands shock and vibration Ideally mates with Keystone 9 Volt battery straps and connectors Holder: Polypropylene; Male/Female Contacts: Brass, Nickel Plate Battery Springs: Spring Steel, Nickel Plate Holds Two () AA Cells in Series Holds Three (3) AA Cells in Series Holds Four (4) AA Cells in Series

20 9 VOLT HOLDERS & CONNECTORS keyelco.com HORIZONTAL 9 VOLT PC SNAP-ONS MOUNTS DIRECTLY TO PRINTED CIRCUIT BOARD PC Male/Female for any standard 9 Volt Battery. Cut costs by eliminating wiring. Compact Space Saver. Space saving design installs directly onto the PC board Contacts available for.06 and.093 thick PC boards Ideal for self-contained battery compartments To Mount Battery On PC Board Use Cat. No. 593 and Cat. No. 594 On-Board : Frame:.05 Steel, Tin Plate; Contacts: Steel, Nickel Plate To Mount Battery Off PC Board Use Cat. No. 635 and Cat. No. 636 Off-Board Male Female Male Female UNIVERSAL 9 VOLT BATTERY HOLDERS With PC Terminals or Combination Quick-Fit/Solder Lug Terminals. 9 VOLT SNAP-IN BATTERY HOLDERS For use with standard 9 Volt battery. Battery snaps in place to insure positive contact. Ideal where severe shock and vibration are encountered. Available with standard solder lugs or printed circuit lugs. Frame: Aluminum Solder Lugs: Brass, Tin Plate PC Lugs: Brass, Tin Plate Contacts & Clips: Steel, Nickel Plate Insulation: Resin Impregnated Fibre NOTE: For battery thicknesses over.640; specify Cat. No or PC Terminals Quick-Fit/Solder Lug Terminals Holds any size, any shape, standard 9 Volt battery. Eliminates need to specify an exact battery brand, size or shape. Ideal for power source or memory back-up use in minicomputers, telecommunications, data processing, security systems, clocks, radios, toys and appliances. Male-female snap-in terminals assure positive contact and proper polarity Durable, rugged construction Excellent spring retention holds battery in place Withstands severe shock and vibration Operating temperature range: -40 F to +66 F (-40 C to +30 C) Impervious to most industrial solvents Body: Molded from high impact, Glass Filled Nylon Terminals: Brass, Tin Plate Contacts: Steel, Nickel Plate 9 PC Lugs 90 Solder Lugs

21 CERTI FIED ISO 900 Q U A L I T Y 9 VOLT STRAPS & CONNECTORS SHIELDED 9 VOLT BATTERY STRAPS Insulates and shields 9 Volt battery snap-on connector contacts Assures safe secure use, reduces the potential of short circuits and prevents tampering with battery contacts Protects circuits, prevents unwanted electrical discharge due to unintended grounding Protects battery contacts from dust, dirt, and physical damage Ideal for rugged applications, made of high impact molded plastic with integral wire lead strain relief Base: Polypropylene Male/Female Contacts: Brass, Nickel Plate Wires (Red & Black): #6AWG, Tinned,.87 end strip, UL/CSA007 PROTECTIVE BATTERY CAP Protects 9 Volt batteries and battery packs when they are not in use Snap-fits onto battery contacts Both male and female contacts are covered, minimizing physical damage which can occur during battery handling, shipping and storage Shields the battery contacts and reduces the potential of a short circuit between battery poles Protects sensitive electronic equipment, systems and circuits, cap prevents unwanted electrical discharges Protects the battery contacts from damage due to dust, dirt and contamination : Impact Resistant Polypropylene, Black CAT. *LEAD NO. LENGTH *Tolerance on lead length +/-0 I -STYLE Space saving, economical Excellent mechanical strength Low contact resistance CAT. *LEAD NO. LENGTH *Tolerance on lead length +/-0 Durable fibre base Wave solderable Anti-Wicking Design T -STYLE with Strain Relief VERTICAL 9 VOLT PC SNAP-ONS 96 BATTERY SNAP-ONS (Miniature and Standard) For most electronic applications requiring a quick connect and disconnect of circuit. Commonly used with 9 Volt or other batteries designed with snap fasteners. Ideal for temporary or permanent means of connecting without soldering. Can be cascaded together for multiple connections. DIMENSIONS FOR REFERENCE ONLY FIG. FIG. 3 FIG. 5 Stud only Stud w/crimp Lugon on Phenolic Washer FIG. FIG. 4 FIG. 6 Base:.06 Fibre Contacts: Steel, Nickel Plate Pins: Brass, Tin Plate With PC Pins 68 - Without PC Pins Cost saving design Ideal for custom applications Attach your own terminals and wire leads Base:.06 Fibre Contacts: Steel, Nickel Plate Socket only Socket w/crimp Lugon on Phenolic Washer CAT. FIG. NO. NO. A B C DESCRIPTION Jr. Stud only-.093 hole Sr. Stud only-.5 hole Jr. Socket only-.093 hole Sr. Socket only-.5 hole Jr. Stud w/ Lug Sr. Stud w/ Lug Jr. Socket w/ Lug Sr. Socket w/ Lug Jr. Stud on Phenolic Washer Jr. Socket on Phenolic Washer Sr. Stud on Phenolic Washer Sr. Socket on Phenolic

22 9 VOLT BATTERY STRAPS m PREMIUM 9 VOLT BATTERY STRAPS Rigidly constructed. Nickel plate, male and female contacts. Female contacts are spring temper. Accepts numerous insertions to meet U.L. approved standards. Provides excellent mechanical strength and low contact resistance. Wire leads (red and black) are soldered for increased reliability. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires are rated to 76 F (80 C) and 300V and meet UL/CSA #06/#007 requirements. Modifications available with different lead lengths. *Tolerance on lead length +/-0 FIBRE BASE.06 THICK Cover Sizes: Contacts: Phos. Br., Nickel Plate Wire: #6 AWG, 7/34 End Strip: 0 Long, Tinned I - STYLE VINYL COVER FULLY INSULATED RIGID ASSEMBLY CAT. *LEAD NO. LENGTH FIBRE COVER Cover Sizes: Contacts: Phos. Br., Nickel Plate Wire: #6 AWG, 7/34 End Strip: 0 Long, Tinned FULLY INSULATED FLEXIBLE ASSEMBLY T - STYLE with Strain Relief CAT. *LEAD NO. LENGTH Cover Sizes: Contacts: Steel, Nickel Plate Wire: # AWG, 7/30 Prebond End Strip: Long, Tinned CAT. *LEAD NO. LENGTH 68 None Cover Sizes: Contacts: Steel, Nickel Plate Wire: # AWG, 7/30 Prebond End Strip: Long, Tinned I - STYLE CAT. *LEAD NO. LENGTH Cover Sizes: Contacts: Steel, Nickel Plate Wire: # AWG, 7/30 Prebond End Strip: Long, Tinned T - STYLE CAT. *LEAD NO. LENGTH ECONOMY 9 VOLT BATTERY STRAPS VINYL COVER When product cost is of the utmost importance these economy battery straps will suit your needs. Brass contacts, nickel plated with vinyl covering. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet UL/CSA #007 requirements. Modifications available with different lead lengths. *Tolerance on lead length +/-0 Cover Sizes: Contacts: Brass, Nickel Plate Wire: #6 AWG, 7/34 End Strip: 0 Long, Tinned FULLY INSULATED RIGID ASSEMBLY I - STYLE CAT. *LEAD NO. LENGTH Cover Sizes: Contacts: Brass, Nickel Plate Wire: #6 AWG, 7/34 End Strip: 0 Long, Tinned T - STYLE with Strain Relief CAT. *LEAD NO. LENGTH DUAL 9 VOLT BATTERY STRAPS These dual battery straps are pre-wired for connecting two 9 Volt batteries. Available for either series or parallel connection. Base made from fibre material with steel, nickel plated contacts. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet UL/CSA #06 requirements. PARALLEL SERIES *Tolerance on lead length +/-0 Contacts: Steel, Nickel Plate Wire: # AWG, 7/30 Prebond End Strip: Long, Tinned CAT. *LEAD NO. LENGTH Contacts: Steel, Nickel Plate Wire: # AWG, 7/30 Prebond End Strip: Long, Tinned CAT. *LEAD NO. LENGTH

23 CERTI FIED ISO 900 Q U A L I T Y AG & 5mm FUSE CLIPS PC thru mount and rivet types for AG, 5mm, 3AG, 9/3 & 3/3 fuse sizes Low contact resistance Withstands shock and vibration Rated 6.3 to 30 Amps Custom designs and modifications available to your specifications PC THRU MOUNT TYPES Available for AG, 5mm, 3AG & 3/3 sizes Low profile, space saving Snap-fit design enhances assembly and PC retention for wave soldering Available with orientation legs to assure proper PC installation Available with or without end stops RIVET TYPES Available for 3AG & 9/3 sizes Available with straight or 45º solder lugs Available with.87,.05 or 0 or quick fit tabs Low profile, space saving Available with or without end stops 5mm/3AG PC MULTI-FUSE CLIP.06 Phosphor Bronze, Tin Plate Current Rating: 5 Amps 5mm PC CLIP 356 AG/5mm THM/SMT FUSE CLIP P.00 Brass, Tin Plate Current Rating: 5 Amps A B P With or Without Orientation Legs 5mm PC CLIP Brass, Tin Plate Current Rating: 0 Amps 35 (THM with PC legs) 356 (SMT with Hole) 5mm PC CLIP Cat. No. 35 Only.06 Brass, Tin Plate Current Rating: 6.3 Amps.06 Brass, Tin Plate Current Rating: 0 Amps

24 3AG (0 ) FUSE CLIPS keyelco.com Snap-In and Press-In design for wave soldering Low profile, space saving Available with orientation legs Available with and without end stops Low contact resistance Rated 5 Amps Economical and easy to assemble 3AG PC CLIP 3AG CLIP WITH SOLDER LUG.00 Brass, Tin Plate. For /4 dia. fuses AG SNAP-IN PC CLIP Brass, Nickel Plate. For /4 dia. fuses A B 3533 Flat AG CLIPS WITH QUICK-FIT TAB.00 Brass, Tin Plate. For /4 dia. fuses AG PC CLIPS.00 Brass, Nickel Plate For /4 dia. fuses A B AG FUSE CLIP.00 Brass, Tin Plate. For /4 dia. fuses. H L END STOPS NO YES NO YES 3AG SNAP-IN PC CLIP.00 Brass, Nickel Plate For /4 dia. fuses 353 Without End Stops 3AG FUSE CLIP P, 356P.00 Brass, Tin Plate. For /4 dia. fuses. A B P P With or Without Orientation Legs Brass, Nickel Plate For /4 dia. fuses END STOPS 353 YES 3567 NO 5

25 CERTI FIED ISO 900 Q U A L I T Y FUSE CLIPS & HOLDERS 9/3 FUSE CLIP PC 5mm FUSE HOLDERS SLIM LINE & (OPTIONAL) COVER.00 Brass, Nickel Plate Current Rating: 5 Amps /3 PC FUSE CLIP Optional cover with window protects and insulates fuse 468 Holder 468C Cover only (with window) LOW PROFILE & (OPTIONAL) COVER Base & Cover: Nylon, UL94V-0 Contacts: Brass, Tin Plate Rated: 5 50V.08 Brass, Tin Plate Current Rating: 30 Amps 3566 CUSTOM FUSE CLIPS & HOLDERS Low profile, space saving design Optional cover protects and insulates fuse 457 Holder 457C Cover only PC SNAP-IN FUSE HOLDER Base & Cover: Nylon, UL94V-0 Contacts: Brass, Tin Plate Rated: 5 50V Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special fuse clips & holders furnished promptly upon receipt of sample, sketch, print or CAD drawings. Low profile, space saving design Snap-in design for wave soldering Optional cover protects and insulates fuse 357 Holder 357C Vinyl cover only Vinyl 5mm & 3AG FUSE COVERS 5mm Base:.06 G-0, UL Rated 94V-0 Clips: Brass, Tin Plate Rated: V 3AG 357C 445C 6

26 3AG (0 ) FUSE HOLDERS UL APPROVED S LOW COST LOW CONTACT RESISTANCE FLAME RETARDANT MOLDED 3AG FUSE HOLDERS Fuse holder for popular 3AG fuse. Molded with barriers to prevent flashover and withstand test of 080 VRMS at 60Hz for minute at 3000 VDC for minute. Molded Base: Mineral Filled Flame Retardant Alkyd. UL Rated 94V-0. Conforms to the 80 second arc tracking test specification per ASTM 495-D. Clips: Brass, Bright Finish keyelco.com CONTACT RESISTANCE Will not exceed 50mΩ before and after being in atmosphere of 00% R.H. at 50ºF (65ºC) for 48 hours, then air dried for hour QUICK-FIT 3AG FUSE HOLDER One piece construction for /4 diameter fuses. Quick-Fit Tab, 0 x.03 size, accepts standard 0 quick-fit female terminals. Eliminates the need for soldering. 3AG PC FUSE HOLDER Leads are terminated at bottom of base. One piece construction for /4 diameter fuses. Ideal where space is a factor. Provides greater mechanical strength than individual clips. Base: Molded Plastic, Flame Retardant, UL Rated 94V Clips: Brass, Nickel Plate 356 3AG FUSE HOLDERS 3AG PC FUSE HOLDER One piece construction for /4 diameter fuses. Ideal where space is a factor. Economical and compact. Provides greater mechanical strength than individual clips. Ideal for wave soldering. Base:.06 GPO-3, UL Rated 94V-0 Lugs & Clips: Brass,Tin Plate FIG. FIG AG SNAP-IN PC FUSE HOLDER Snap-In design, ideal for wave soldering. One piece construction for /4 diameter fuses. Space saving. Economical and compact. Increases production. Excellent mechanical strength. Base:.06 GPO-3, UL Rated 94V-0 Clips: Brass, Tin Plate Black Phenolic Base:.5 thick NEMA Grade XP-FED L-P-509. Max. operating temperature 66 F (30 C) continuous. UL Rated 94-HB. Fiberglass Base:.5 thick NEMA Grade GPO 3. Max. operating temperature 300 F (48 C) continuous. UL Rated 94V-0. Clips: Brass, Nickel Plate ASSEMBLED WITH CLIP NO BLACK FIBER- HOLDS PHENOLIC GLASS NO. OF FIG. FUSES NO. A Base:.03 G-0, UL Rated 94V-0 Clips: Brass, Tin Plate 7

27 CERTI FIED ISO 900 Q U A L I T Y AUTO FUSE CLIPS & HOLDERS Available for standard and mini blade fuses Thru hole PC mountable, maintains position during wave soldering Space saving, low profile designs Horizontal and vertical mini blade clip for Littelfuse ATO 97 series and Bussmann ATM fuses Withstands the rigors of shock and vibration Horizontal and vertical standard blade clips for Littelfuse ATO 57 series and Bussmann ATC fuses Holds fuse securely, even after multiple insertions Orientation legs assure proper PC installation Voltage Rating: 500VAC Current Rating: 30 Amps or as noted PC AUTOMOTIVE BLADE FUSE CLIPS FOR STANDARD BLADE FUSES.06 Brass, Nickel Plate For Two Clips.0 Brass, Nickel Plate For Two Clips Current Rating: 40 Amps 35 - Vertical Current Rating: 40 Amps Horizontal FOR.0.03 MINI BLADE FUSES.06 Brass, Nickel Plate Low Profile For Two Clips.0 Brass, Nickel Plate For Two Clips.0 Brass, Nickel Plate For Two Clips Vertical Vertical Horizontal Thru hole PC mountable, maintains position during wave soldering Holder design prevents solder wicking Withstands the rigors of shock and vibration Holds fuse securely, even after multiple insertions Suitable for 40 Amp applications PC AUTOMOTIVE BLADE FUSE HOLDERS FOR STANDARD BLADE FUSES Contacts: Brass, Nickel Plate; Insulator: Glass Filled Nylon, UL Rated 94V-0 Current Rating: 30 Amps; Voltage Rating: 500VAC Temperature Rating: -58 F to +9 F (-50 C to +45 C) FOR.0.03 MINI BLADE FUSES CAT NO. 35- CAT NO MODULAR PC AUTOMOTIVE BLADE FUSE HOLDER Designed for standard auto blade fuses Fully insulated compact design Mounts easily in pre-drilled or punched hole Holder has pocket to hold spare fuse Safety lever release clip will not open under shock or vibration Fuses are installed and removed easily May be used individually or easily interlocked for multiple mounting For Two Holders Contacts: Brass, Tin Plate Body: Nylon, UL Rated 94V-0 Dielectric Strength: (60 seconds) 500VAC/min. Current Rating: 30 Amps

28 QUICK-FIT TERMINALS keyelco.com Ideal for rugged multi-insertion applications Pre-assembled header reduces PC assembly costs Increases PC board retention strength Keeps terminals perpendicular Maintains position for wave soldering Material:.03, Brass or Steel, Tin Plated Insulator: Thermoplastic, UL Rated 94V-0 Voltage Rating: 500VAC Current Rating: 5 Amps Temperature Rating: -58 F to +9 F (-50 C to +45 C) 0 STURDI-MOUNT PC QUICK-FIT HEADERS 0 HORIZONTAL AVAILABLE WITH TIN PLATED BRASS OR STEEL TABS 0 VERTICAL BRASS STEEL TABS TABS NO. A TABS DIM Mtg. Holes:.05 Dia. x.00 Centers.0 /.87 /.05 QUICK-FIT RIVET TYPES BRASS STEEL TABS TABS NO. A TABS DIM TABS.0 TABS.87 /.05 TABS Brass, Tin Plate Brass, Tin Plate A B Brass, Tin Plate Slot Brass, Tin Plate Dia. Hole 45 & 90 QUICK-FIT RIVET TYPES.0 /.87 / 0 TABS.0 /.87 / 0 TABS 0 TAB 90 Degree : Bright Brass CAT. TAB MAT L HOLE NO. SIZE THICK A B C DIA Degree : Bright Brass MULTIPLE 90 : Bright Brass CAT. TAB MAT L HOLE NO. SIZE THICK A B C DIA CAT. TAB MAT L HOLE NO. SIZE THICK A B DIA. PAIRS Degree : Bright Brass 45 Degree : Bright Brass CAT. TAB MAT L HOLE NO. SIZE THICK A B C DIA CAT. TAB MAT L HOLE NO. SIZE THICK A B C DIA CUSTOM QUICK-FIT TERMINALS Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special stampings furnished promptly upon receipt of sample, sketch, print or CAD drawings. 9

29 CERTI FIED ISO 900 Q U A L I T Y PC QUICK-FIT TERMINALS Underwriters Laboratories, Inc. Recognized Component Program UL File Number E0546 UL file number E0546 has been assigned to Keystone Electronics Quick-Fit terminals (see pages 9-3) indicating recognition by Underwriters Laboratories Inc. that they are in compliance with their component program. Underwriters Laboratories Inc. component program assures that Quick-Fit terminals meet the dimensional and performance requirements of the National Electrical Manufacturers Association specification number NEMA-98-(988) and UL30. 0 PC QUICK-FIT MALE TYPES 0 TAB 0 TAB DUAL.0/0 TAB MTG. HOLES Brass, Tin Plate.05 Dia. Sturdi-Mount MTG. HOLES 87-ST.03 Brass, Tin Plate.05 Dia. MTG. HOLES 8.03 Brass, Tin Plate.05 Dia. 0 TAB 0 TAB 0 TAB Sturdi-Mount MTG. HOLES Brass, Tin Plate.067 Dia. Sturdi-Mount MTG. HOLES Brass, Tin Plate.067 Dia. Sturdi-Mount MTG. HOLES Brass, Tin Plate.05 Dia. 0 TAB 0 TAB 0 TAB MTG. HOLES Brass, Tin Plate.05 Dia. Sturdi-Mount MTG. HOLES 89-ST.03 Brass, Tin Plate.05 Dia. NOTE: 0 TAB HAND INSERTION TOOL; 88, SEE PAGE 3 MTG. HOLES 8.03 Brass, Tin Plate.05 Dia. 30

30 PC QUICK-FIT TERMINALS m.0/.87/.05/ 0 PC QUICK-FIT MALE TYPES.05 TAB.05 TAB.87 TAB MTG. HOLES Brass, Tin Plate.046 Dia Brass, Tin Plate.05 Dia. Sturdi-Mount MTG. HOLES 86-ST.00 Brass, Tin Plate.046 Dia. 3-ST.03 Brass, Tin Plate.05 Dia. Sturdi-Mount MTG. HOLES Brass, Tin Plate.043 Dia..87 TAB.87 TAB.0 TAB Sturdi-Mount MTG. HOLES Brass, Tin Plate.046 Dia..03 Brass, Tin Plate.05 Dia..0 TAB MTG. HOLES 85-ST.00 Brass, Tin Plate.046 Dia. -ST.03 Brass, Tin Plate.05 Dia. MTG. HOLE Brass, Tin Plate.046 Dia..03 Brass, Tin Plate.05 Dia..87 TAB MTG. HOLES Brass, Tin Plate.046 Dia Brass, Tin Plate.05 Dia. 0 TAB MTG. HOLES Brass, Tin Plate.046 Dia Brass, Tin Plate.05 Dia. 0 TAB 0 TAB MTG. HOLES Brass, Tin Plate.056 Dia. MTG. HOLES Brass, Tin Plate.05 Dia. MTG. HOLES Brass, Tin Plate.06 Dia. 3

31 CERTI FIED ISO 900 Q U A L I T Y PC QUICK-FIT TERMINALS.0 /.87 /.05 / 0 PC QUICK-FIT FEMALE TYPES.0 HORIZONTAL.05 HORIZONTAL 0 HORIZONTAL :.0 Brass, Nickel Plate ACCEPTS TAB :.0 Brass, Nickel Plate ACCEPTS TAB :.06 Brass, Nickel Plate ACCEPTS TAB VERTICAL.05 VERTICAL 0 VERTICAL :.0 Brass, Nickel Plate ACCEPTS TAB : Brass, Nickel Plate CAT. ACCEPTS MAT L NO. TAB THICK :.06 Brass, Nickel Plate ACCEPTS TAB VERTICAL QUICK-FIT FEMALES 0 QUICK-FIT VINYL BOOT Easily slips over terminal Insulated and protects : Tinned Brass :.06 Brass, Nickel Plate ACCEPTS TAB CAT. A DIM B DIM AWG MAT L NO. TAB SIZE LENGTH SIZE THICK CAT. BOOT NO. COLOR 447 CLEAR 447 RED 4473 BLUE 4474 YELLOW MALE QUICK-FIT INSERTION TOOL Designed to install 0 male Quick-Fit terminals quickly and easily Insert terminal into slot, spring clip will Align terminal with mounting holes hold terminal securely for positioning and press-fit to secure firmly in place Lift tool to release terminal 88 3

32 SMT/THM TEST POINTS keyelco.com (SMT) SURFACE MOUNT TEST POINTS ON TAPE & REEL MINIATURE Ultra low profile ideally suited for advanced surface mount printed circuit board applications Designed for long life and durability Manufactured using flat wire to provide a large mounting surface area Ideal for use with miniature probes, clips, and hooks Efficient, safe, board level testing COMPACT Unique design provides exceptional strength and durability Simplifies testing on dense SMT circuit boards Ideal for use with most standard probes, clips and hooks Efficient, safe, board level testing Contact Material:.00 Phosphor Bronze Contact Finish: Tin Lead Tape Material: 8mm wide; 4mm pitch; conductive polycarbonate carrier tape meets ANSI/EIA-48 standard Reel Size: Cat. No. 505: 7 inches 000 pieces per reel Cat. No. 507:3 inches 5000 pieces per reel 505 (Tape & Reel) 507 (Tape & Reel) Pad Layout Contact Material:.05 Phosphor Bronze Contact Finish: Tin Lead Tape Material: mm wide; 4mm pitch; conductive polycarbonate carrier tape meets ANSI/EIA-48 standard Reel Size: Cat. No. 506: 7 inches 000 pieces per reel Cat. No. 508:3 inches 5000 pieces per reel 506 (Tape & Reel) 508 (Tape & Reel) (THM) THRU-HOLE MOUNT TEST POINTS COLOR KEYED Pad Layout Color keyed for visibility and quick identification Economical choice for PC test point terminations Snap-fit mounting provides positive retention for wave soldering Wire form loop for safe, non-slip testing Space saving, ultra low and low profile designs High profile design for difficult to reach applications Suitable for high density packaging on.06 and.093 PC boards Practical replacement for wire-wrap posts and turrets Secure grip for J hooks, EZ hooks, grabbers, alligator clips, tips or probes Plastic base strengthens terminal for positive holding power Ideal for reliable production testing and field service troubleshooting MINIATURE COMPACT MULTIPURPOSE CAT. BASE NO. COLOR 5000 RED 500 BLACK 500 WHITE 5003 ORANGE 5004 YELLOW Terminal: Phosphor Bronze Wire, Tin Plate Base: Valox, UL 94V-0 MOUNTING DETAIL Mtg. Hole:.040 Diameter Mtg. Centers: CAT. BASE NO. COLOR 5005 RED 5006 BLACK 5007 WHITE 5008 ORANGE 5009 YELLOW Terminal: Phosphor Bronze Wire, Tin Plate Base: Valox, UL 94V-0 MOUNTING DETAIL Mtg. Hole:.063 Diameter Mtg. Centers:.5.5 CAT. BASE NO. COLOR 500 RED 50 BLACK 50 WHITE 503 ORANGE 504 YELLOW Terminal: Phosphor Bronze Wire, Tin Plate Base: Valox, UL 94V-0 MOUNTING DETAIL Mtg. Hole:.063 Diameter Mtg. Centers:

33 CERTI FIED ISO 900 Q U A L I T Y PC TEST POINT TERMINALS Low profile, space saving designs for dense packaging Wide variety of configurations to suit most applications Safe, practical, economical replacement for wire-wrap posts Easy mount design, ideal for wave soldering Re-fit PC boards without need for re-design Provides easy access for production testing and field service troubleshooting Positive grip when using J hooks, EZ hooks, grabbers, clips, tips and probes Custom test point terminals can be manufactured to your specifications Other platings and materials available upon request PC TEST POINTS SLOTTED & LOOP TYPES 4950 SLOTTED.05 Brass, Tin Plate.05 Brass, Tin Plate.05 Brass, Tin Plate Brass, Tin Plate.05 Brass, Tin Plate.00 Brass, Tin Plate.05 Brass, Tin Plate Brass, Tin Plate.05 Brass, Tin Plate.05 Brass, Tin Plate.06 Brass, Tin Plate LOOP.05 Brass, Tin Plate.00 Brass, Tin Plate.05 Brass, Tin Plate.05 Brass, Tin Plate

34 PC TEST POINT TERMINALS keyelco.com PC TEST POINTS LOOP TYPES.00 Brass, Tin Plate.00 Brass, Tin Plate.05 Brass, Tin Plate.00 Brass, Tin Plate CUSTOM TEST POINT TERMINALS Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. CAT. NO. A B Brass, Tin Plate.05 Brass, Tin Plate.05 Brass, Tin Plate Quotations on special stampings furnished promptly upon receipt of sample, sketch, print or CAD drawings. LARGE CLIP SCREW CONNECTION ALLIGATOR CLIPS MEDIUM CLIP SOLDER CONNECTION WITH STRAIN RELIEF INSULATED NON-INSULATED 5048 : Clip: Steel, Nickel Plate SMALL CLIP SOLDER CONNECTION WITH STRAIN RELIEF JAW SPREAD.35 max. CAT. INSULATOR NO. COLOR 5039 RED 5040 BLACK : Clip: Steel, Nickel Plate Insulator: Vinyl LARGE CLIP SOLDER CONNECTION (BARREL ACCEPTS WIRE OR STANDARD BANANA PLUGS) JAW SPREAD.36 max. INSULATED NON-INSULATED INSULATED NON-INSULATED CAT. INSULATOR NO. COLOR 5034 RED 5035 BLACK 5036 GREEN 5037 YELLOW JAW SPREAD.36 max. : Clip: Steel, Nickel Plate Insulator: Vinyl CAT. INSULATOR NO. COLOR 5045 RED 5046 BLACK JAW SPREAD.35 max. : Clip: Steel, Nickel Plate Insulator: Vinyl 35

35 CERTI FIED ISO 900 Q U A L I T Y SCREW TERMINALS OFFSET LEG STRAIGHT LEG SOLDER TAB Terminal:.03 Steel, Terminal:.03 Steel, Terminal:.03 Steel, Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) Tin Plate Screw: Steel, Nickel Plate (Screw Installed & Captivated) SOLDER TYPE PRESS-FIT SCREW TERMINALS.87 QUICK-FIT TYPE Terminal:.00 Steel, Tin Plate Screw: Steel, Zinc Plate 7 (Screw Installed & Captivated) Mounting Detail Press-fit into.3 sq. hole Terminal:.00 Steel, Tin Plate Screw: Steel, Zinc Plate 73 (Screw Installed & Captivated) Mounting Detail Press-fit into.3 sq. hole BINDING POST TERMINALS (RIVET TYPE) SPADE BOLTS 6-3 & 8-3 FOR 3/3 BOARD Terminal: Brass, Tin Plate Screw: Steel, Nickel Plate (Screw Supplied Unassembled FOR 3/3 BOARD Terminal: Brass, Tin Plate Screw: Steel, Nickel Plate (Screw Supplied Unassembled FOR /8 BOARD Terminal: Brass, Tin Plate Screw: Steel, Nickel Plate (Screw Supplied Unassembled : Steel, Zinc Plate A B Thread 59 3/8 3/ /8 /

36 SCREW TERMINALS m 6-3 INSERT TERMINAL 0-3 INSERT TERMINAL These sturdy, easy to mount space saving 6-3 insert terminals are available with screws installed and captivated. They are also available with screw unassembled or without a screw. PRINCIPLE FEATURES Easy to connect using solid or stranded wire, crimp lugs or terminals Anti-rotation tab for use with spade terminals Supplied with screw installed and captivated, with screw unassembled, or without screw These sturdy, low cost 0-3 PC mount terminals, feature an anti-rotation tab for use with spade terminals. They are available with the screw installed and captivated, the screw unassembled or without a screw. PRINCIPLE FEATURES Easy to connect using solid or stranded wire, crimp lugs or terminals Anti-rotation tab for use with spade terminals Supplied with screw installed and captivated, with screw unassembled, or without screw Rated: 5 Amps Terminal:.03 Brass, Tin Plate Screw: Combination drive, Stainless Steel Rated: 30 Amps Terminal:.06 Brass, Tin Plate Screw: Stainless Steel 0 (Screw Installed & Captivated) 98 (Screw Supplied Unassembled) 84 (Supplied Less Screw) 0 (Screw Installed & Captivated) 99 (Screw Supplied Unassembled) 93 (Supplied Less Screw) 8-3 HEAVY DUTY TERMINAL 0-3 HEAVY DUTY TERMINAL These 8-3 heavy duty terminals easily mount on PC boards and feature a notched leg that facilitates good mechanical and solder connections below the circuit board. PRINCIPLE FEATURES Anti-rotation tab for use with spade terminals Below the board notched leg, to facilitate mechanical and solder connections Easy to connect using solid or stranded wire, crimp lugs or terminals Available with screw installed or unassembled These heavy duty 0-3 terminals are available with the screw installed or unassembled, and feature easy access to connect solid or stranded wire, crimp type lugs or terminals. PRINCIPLE FEATURES Anti-rotation tab for use with spade terminals Below the board notched leg, to facilitate mechanical and solder connections Easy to connect using solid or stranded wire, crimp lugs or terminals Available with screw installed or unassembled Rated: 5 Amps Terminal:.064 Brass, Tin Plate Screw: Brass, Tin Plate Rated: 30 Amps Terminal:.064 Brass, Tin Plate Screw: Steel, Nickel Plate 09 (Screw Installed) 07 (Screw Supplied Unassembled) 83 (Screw Installed) 08 (Screw Supplied Unassembled) 37

37 CERTI FIED ISO 900 Q U A L I T Y PC SCREW TERMINALS LOW PROFILE - PC SCREW TERMINALS These easy to mount screw terminals are ideally suited for high density packaging and are available unassembled or with the screw installed and captivated. They are a practical alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. PRINCIPAL FEATURES Low profile Stable, no-rock design Easily mounts in pre-drilled or stamped holes Accepts - AWG solid or stranded wire, scrimp type terminals or lugs Space saving and time saving Combination drive, binding head screw A practical, low-cost alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. Supplied unassembled or with screw installed and captivated. PRINCIPAL FEATURES Low profile Stable, no-rock design with exclusive anti-rotational feature Ideally suited for high-density packaging Space saving and time saving Combination drive, binding head screw Rated: 5 Amps Terminal:.03 Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate Rated: 5 Amps Terminal:.03 Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate 7784 (Supplied Less Screw) 898 (Screw Supplied Unassembled) 7778 (Screw Installed & Captivated) 7785 (Supplied Less Screw) 895 (Screw Supplied Unassembled) 7775 (Screw Installed & Captivated) A practical, low-cost alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. Supplied unassembled or with screw installed and captivated. PRINCIPAL FEATURES Compact, heavy duty design Six snap-in legs for total stability Serrated top surface secures connection Combination drive, binding head screw 30 AMP - PC SCREW TERMINALS HEAVY DUTY This heavy duty screw termnial has been designed to carry 30 Amps, while maintaining a space saving compact profile, making it ideal for high density packaging. PRINCIPAL FEATURES Compact, heavy duty design Six snap-in legs for total stability Serrated top surface secures connection Rated: 30 Amps Terminal:.03 Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate 7786 (Supplied Less Screw) 897 (Screw Supplied Unassembled) 899 (Screw Installed & Captivated) Rated: 30 Amps Terminal:.045 Brass, Tin Plate Screw: Stainless Steel 7787 (Supplied Less Screw) 896 (Screw Supplied Unassembled) CUSTOM PC SCREW TERMINALS Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special PC screw terminals furnished promptly upon receipt of sample, sketch, print or CAD drawings. 38

38 PC SCREW TERMINALS keyelco.com These easy-to-mount, multipurpose screw type terminals are a practical, low-cost alternative to PC screw type edge connectors, barrier blocks, terminal boards and terminal strips. Steadfast and easy to install, will accommodate solid or stranded wire, crimp-type terminals or lugs. Multi-placement of these low-profile terminals make them ideally suited for high-density packaging. Supplied unassembled or with screw installed and captivated. PRINCIPAL FEATURES Low profile Stable, no-rock design with exclusive anti-rotational feature Easily mounts with four legs into pre-drilled or punched holes Accepts 4- AWG solid or stranded wire, crimp-type terminals or lugs Ideally suited for high-density packaging Available in horizontal or vertical mounting Space-saving and time saving Easy accessibility for PC board testing Binding screw is positioned above board level to avoid wicking during wave soldering Terminals are made of Brass with Tin Plate Supplied with a combination drive 6-3 binding head screw PC MOUNT SCREW TERMINALS HORIZONTAL TYPE SNAP-IN PC MOUNT Rated: 5 Amps Terminal:.03 Thick Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate PC MOUNT 7779 (Supplied Less Screw) 7690 (Screw Supplied Unassembled) 769 (Screw Installed & Captivated) SNAP-IN PC MOUNT VERTICAL TYPE Rated: 5 Amps Terminal:.03 Thick Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate 778 (Supplied Less Screw) 890 (Screw Supplied Unassembled) 7700 (Screw Installed & Captivated) PC MOUNT 7780 (Supplied Less Screw) 769 (Screw Supplied Unassembled) 7693 (Screw Installed & Captivated) 778 (Supplied Less Screw) 89 (Screw Supplied Unassembled) 770 (Screw Installed & Captivated) CUSTOM DESIGNS 45 PC MOUNT SCREW TERMINAL Rated: 5 Amps Terminal:.03 Thick Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate 7783 (Supplied Less Screw) 889 (Screw Supplied Unassembled) 770 (Screw Installed & Captivated) 39

39 CERTI FIED ISO 900 Q U A L I T Y MODULAR PC TERMINAL BLOCKS MODULAR INTERLOCKS Horizontal Wire Entry Low Profile Mounts easily in pre-drilled or stamped holes Wire guard helps prevent damage to conductors 5mm SPACING CAT. A NO. POSITIONS DIM Contact: Brass, Tin Plate Housing: Blue PBT, UL Rated 94V-0 Screw: Steel, Zinc Plate & Clear Chromate (captivated) PC TERMINAL BLOCKS ELECTRICAL Current Rating: 6 Amps Dielectric Strength: 500V Insulation Breakdown: 500VAC/min. Rated Voltage: 50V MECHANICAL Operating Temp: F to 48 F (-30 C to 0 C) Peak Temp: +393 F (+00 C) Wire Size: Accepts #-4 AWG Recommended Mtg. Hole Size:.047 Recommended Mtg. Hole Size:.05 Modular Interlocks allow expansion up to 4 positions MODULAR INTERLOCKS 45 Wire Entry Easy access to termination points on densely packaged PC boards Screw heads are on top of unit to facilitate access Wire guard helps prevent damage to conductors 5mm SPACING CAT. A NO. POSITIONS DIM MODULAR INTERLOCKS PLUGGABLE WITH PIN STRIPS These unique modular terminal blocks are convenient and easy to use. They may be interlocked to achieve a maximum of 4 positions.the header pins, for both the 6 and 0 Amp models are supplied in strips of 4. Simply snap off the desired number of positions required and insert into PC board. The modular terminal block can be plugged into the header strip at anytime. Space saving low profile design Easy access horizontal wire entry Convenient screw head access on top of terminal block Headers mount easily in pre-drilled or stamped holes Wire guards help prevent damage to conductors Accepts #-6 AWG wire Pin Header Strips (4 pins per strip) Recommended Mtg. Hole Size:.047 Contact: Brass, Tin Plate Header Pins: Brass, Tin Plate Housing: Blue PBT, UL Rated 94V-0 Screw: Steel, Zinc Plated & Clear Chromate (captivated) ELECTRICAL Dielectric Strength: 500V Insulation Breakdown: 500V AC/min. Rated voltage: 50V MECHANICAL Operating Temp: F to 48 F (-30 C to 0 C) Peak Temp: +393 F (+00 C) 3.5mm SPACING CAT. CURRENT NO. POSITIONS A RATING Amps 5mm SPACING CAT. CURRENT NO. POSITIONS A RATING Amps 874 Recommended Mtg. Hole Size: Terminal: Brass, Tin Plate Contact: Stainless Steel Housing: Blue Nylon 6/6, UL Rated 94V-0 ELECTRICAL Current Rating: 0 Amps Dielectric Strength: 500V Insulation Breakdown: 500VAC/min. MECHANICAL Operating Temp: F to 48 F (-30 C to 0 C) Peak Temp: +39 F (+00 C) 5mm SPACING CAT. A NO. POSITIONS DIM SCREWLESS PUSH BUTTON TYPE Particularly useful when quick reliable connections are required or when temporary connections are needed, such as on test sets and bread boards. They may be interlocked to achieve a maximum of 4 positions. Available with two or three terminal positions Accepts #0-8 AWG wire* Mounts easily in predrilled or stamped holes Stainless Steel spring assures good contact Suited for both solid and stranded wire Quick reliable connection *Recommended wire strip length:.300 for (3) Postions MODULAR INTERLOCKS Horizontal wire entry

40 COMPUTER & CONNECTOR HARDWARE JACK SCREWS Equivalent to AMP, CANNON & TRW Jack Screws D subminiature connector mounting screw Other sizes upon request SEMS JACK SCREWS D subminiature connector mounting screw Captivated helical spring lockwasher, simplifies use Flat washer and nut supplied unassembled m : Steel JACK ONLY JACK WITH HARDWARE (Supplied Unassembled in Bulk) ZINC PLATE & ZINC PLATE & L ZINC PLATE & ZINC PLATE & GOLD IRIDITE CLEAR CHROMATE DIM. GOLD IRIDITE CLEAR CHROMATE JACK WITH HARDWARE L JACK ONLY (Supplied Unassembled DIM. in Bulk) : Steel, Zinc Plate & Clear Chromate MOUNTING HARDWARE Our assortment of standard clips and washers offer the needed flexibility to secure your connectors in the manner best suited to your instrumentation and design. U CLIP TURNABLE JACK SCREWS Turnable jack screws, available with or without screwdriver slot make mating and disconnecting computer connectors quick and easy. DIRECT ACCESS AVAILABLE WITH OR WITHOUT SCREWDRIVER SLOT. Supplied Unassembled 06 : Clip & Screw: Steel, Zinc Plate & Gold Iridite SADDLE WASHER T L DIM. DIM. WITHOUT SLOT WITH SLOT STRAIGHT KNURL AVAILABLE WITH OR WITHOUT SCREWDRIVER SLOT. : Steel, Black Oxide Supplied Unassembled 063 : Clip & Screw: Steel, Zinc Plate & Gold Iridite BOW TIE RETAINING CLIP WITHOUT SLOT WITH SLOT : Steel, Zinc Plate & Clear Chromate SLIM LINE AVAILABLE WITH OR WITHOUT SCREWDRIVER SLOT. Supplied Unassembled X x / x 9/3 : Clip & Screw: Steel, Zinc Plate & Gold Iridite H DIM. WITHOUT SLOT WITH SLOT : Steel, Nickel Plate 4

41 CERTI FIED ISO 900 Q U A L I T Y INSULATED PC SPACERS/SUPPORTS Easy snap-in assembly Strong dependable grip Designed for.06 thick PC boards and chassis No tools required for installation Releasable for repairs : Nylon, UL Rated 94V-0 PC TENSION-FIT SUPPORTS PC LOCK-IN SUPPORTS One end locks into chassis, the other end tension-fits into the PC board One end locks into chassis, the other end locks into the PC board CAT. A NO. DIM. 97A 0 98A 99A 930A 93A A A.000 One end locks into chassis, the other end tension-fits into the PC board CAT. A NO. DIM. 97B 0 98B 99B 930B 93B B B.000 One end locks into chassis, the other end locks into the PC board PC SPACER SUPPORTS One end locks into chassis, other end supports the PC board STACKING SPACERS CAT. A NO. DIM CAT. A NO. DIM Self-aligning and self retaining. Designed for stacking multiple levels of PC boards. Available for use with #4, #6 & #8 size screws. CAT. A B C MTG SCREW NO. DIM. DIM. DIM. HOLE SIZE # # # CAT. A NO. DIM One end locks into chassis, the other end locks into the PC board with easy release lever CAT. A NO. DIM METRIC PC LOCK-IN SUPPORTS One end locks into chassis, the other end locks into the PC board : Nylon, UL Rated 94V- CAT. A NO. DIM mm mm mm mm mm 8848 mm mm mm 885 8mm 4

42 HEX MALE/FEMALE STANDOFFS MALE/FEMALE 0 HEX THREADED STANDOFFS keyelco.com CHOICE OF: Brass:ASTM-B6 Plating: Nickel (QQ-N-90) Aluminum: QQ-Q-5/3 Plating: Clear Iridite (Mil-C-554) Stainless Steel: ASTM A58/A58 THREAD SIZE TL EXTERNAL 3/6 (.87) /4 (0) 3/8 () 4-40 THREAD A INTERNAL /4 (0) 3/8 () 3/8 () 6-3 THREAD 8-3 THREAD LENGTH INCHES "L" /4 (0)*** 3/8 ()** / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/8 (.5) -/4 (0) -3/8 () -/ () -5/8 () -3/4 (.750) (.000) STAINLESS STEEL BRASS ALUMINUM * *Internal Thread 0 Deep ***Internal Thread.30/.50 Deep METRIC MALE/FEMALE LENGTH INCHES "L" /4 (0)*** 3/8 () ** / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/8 (.5) -/4 (0) -3/8 () -/ () -5/8 () -3/4 (.750) (.000) STAINLESS STEEL HEX THREADED STANDOFFS (5mm & 5.5mm) A comprehensive range of precision made metric male/female spacers. : Brass, Nickel Plate. BRASS ALUMINUM LENGTH INCHES "L" 3/8 () ** / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/8 (.5) -/4 (0) -3/8 () -/ () -5/8 () -3/4 (.750) (.000) STAINLESS STEEL BRASS NYLON MALE/FEMALE 0 HEX : Nylon 6/6 THREAD SIZE A 3/6 (.87) /4 (0) 3/8 () ALUMINUM mm HEX* "L" 0mm mm 5mm 8mm 0mm 5mm mm HEX* "L" 0mm mm 5mm 8mm 0mm 5mm LENGTH INCHES "L" /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/8 (.5) -/4 (0) -3/8 () -/ () -5/8 () -3/4 (.750) (.000) 4-40 THREAD THREAD 484* THREAD 488* 489** *Internal Thread.30/.50 Deep **Internal Thread 0 Deep 43

43 CERTI FIED ISO 900 Q U A L I T Y THREADED STANDOFFS HEX ROUND 44 Brass: per ASTM-B6 Aluminum: QQ-A-5/3, Alloy 0-T3 THREAD PLATING Zinc: ASTM B633 Iridite Finish: MIL-C-554 O.D..56 (5/3).87 (3/6) 0 (/4) 0 (/4) 0 (/4) (3/8) LENGTH 3/6 (.87) /4 (0) 5/6 (.3) 3/8 () /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/ () (.000) /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/4 (0) -/ () -3/4 (.750) (.000) -/4 (0) - () /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) -/ () (.000) 3/8 () / () 5/8 () 3/4 (.750) (.000) NOTE: Spacers over.000 long are tapped deep each end. ALUMINUM IRIDITE FINISH HEX ROUND 797A 797B 797C 797D A 96B 96C 96D 96E 80A 80B 80C 80D A 35B 35C 35D 35E BRASS ZINC PLATE HEX ROUND 798A 798B 798C 798D A B 450A 450B 450C D E A 45B 45C 45D 45E A 474B 474C D E A 45B 45C 45D 45E 80A 80B 80C 80D A B 547A 547B 547C D E A 548B 548C 548D 548E F A 69B 69C D E A 549B 549C 549D 549E

44 SWAGE/FORCE FIT STANDOFFS SWAGE THREADED STANDOFFS ROUND HEX keyelco.com A broaching-type fastener/standoff for installation in panels and circuit boards.060 inch and thicker made of plastic and other non-ductile materials. Available threaded or with clearance holes. Easy to install, pressed into punched or drilled holes. S: Stainless Steel per ASTM-A58/A58 Mounting Holes:.47 hole for hole for hole for 6-3. Tolerance on Mounting Holes: +.003/ : Brass: per ASTM-B6 Nickel Plate: QQ-N-90 ROUND H HEX Height L For LD Above Shank Panel Shank Panel Length Thickness Diameter -56 THREAD.56 O.D. (5/3 ) / / / / THREAD.87 O.D. (3/6 ) / / / / / THREAD 0 O.D. (/4 ) 560 A.5.09 / F / / / / / / / / / / / / / / / / / THREAD 0 O.D. (/4 ) 560 B.5.09 / C / / / / B / D 0.7 / B.09 / C.40 3/ D.7 / / / / / / / / / / / / STAKING TOOLS FOR SWAGE STANDOFFS Precision made tools-heat treated and plater. Will give your job the professional appearance. Set of tools consists of: Top Staking Tool and Anvil. CAT.NO.TL-9 For Bushing 5/3 OD with -56 Thd. CAT.NO.TL-0 For Bushing /4 OD with 4-40 Thd. CAT.NO.TL- For Bushing /4 OD with 6-3 Thd. Threaded * *4870 *Thread depth THREAD I.D. #4 (.6) #4 (.6) #4 (.6) #4 (.6) #4 (.6) #6 (.43) #6 (.43) #6 (.43) #6 (.43) #6 (.43) THREADED "L" LENGTH CLEAR HOLE LENGTH O.D O.D Clear Hole "A" "A" CUSTOM SPACERS & STANDOFFS Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special spacers & standoffs furnished promptly upon receipt of sample, sketch,print or CAD drawings. 45

45 CERTI FIED ISO 900 Q U A L I T Y ALUMINUM ECONOMY SPACERS PRECISION FORMED NO BURRS Made of flat strip aluminum and rolled on precision equipment. Assures maximum bearing surface, square ends. Aluminum: Per 505-H34 per QQ-A-50/8b Tight Joint on Outside Diameter Description and Tol. SPACER FOR #4 #6 #8 I.D. ± O.D. ± L Length #4 Screw #6 Screw SPACERS & STANDOFFS #8 Screw BLIND CAPTIVE NUTS PRESS FIT MOUNT CHASSIS, PANELS, HEAT SINKS, SOCKETS : Molded Nylon with Brass threaded insert. EASY ASSEMBLY DAMPENS VIBRATION ELIMINATES INSULATING WASHER HI-DIELCTRIC STRENGTH A unique reusable fastener made of NYLON which contains a threaded brass nut. Finger pressure or light tap seals it in a pre-drilled hole. The nut is drawn up causing a Nylon bulge behind the workpiece. Screw may be removed or replaced THREAD "H" HOLE SIZE REQ/D IDEAL SHEET THICKNESS A T METRIC HEX THREADED STANDOFFS A comprehensive range of precision made metric hex spacers. : Brass, ASTM-B6, Nickel plated (QQ-N-90) ROUND CLEAR SPACERS BRASS OR ALUMINUM S: Brass: ASTM-B6, Nickel plate (QQ-N-90) Aluminum: Iridite Finish (MIL-C-554) L LENGTH HOLE BRASS A 454B 454C D E A 457B 457C D E ALUMINUM CLEARENCE HOLE:.0 for #4 screw.40 for #6 screw.7 for #8 screw ROUND SWAGE CLEAR SPACERS : Brass, ASTM-B6, Nickel plate (QQ-N-90) CLEARENCE HOLE:.0 for #4 screw.40 for #6 screw H HEIGHT FOR PANEL THICKNESS /6 3/3 /6 3/3 /6 3/3 /6 3/3 /6 3/3 /6 3/3 C HOLE L HEX STAINLESS THREADED STANDOFFS : Stainless Steel per ASTM-A58/A58, Class 303 Corrosion Resistant mm HEX* "L" 5mm 0mm 5mm 0mm 5mm mm HEX* "L" 5mm 0mm 5mm 0mm 5mm L Length Inches /4 (0) 3/8() / () 3/4 (.750) (.000) / () (.000) 4-40 Thread 9 9A 9B 9C 9D 9E 9F 6-3 Thread 9 9A 9B 9C 9D 9E 9F 8-3 Thread 93 93A 93B 93C 93D 93E 93F 4-40 thread on /" and over tapped /4" each end 6-3 & 8-3 thread on " and over tapped 3/8" each end

46 HINGED STANDOFFS & KITS HINGED STANDOFFS APPLICATIONS UNLIMITED TIME SAVING SPACE SAVING INTERCONNECT CIRCUITS OR SERVICES WITHOUT DANGER OF SHORTING : Brass:per ASTM-B6 Finish:Zinc plate and Gold Iridite FEMALE/FEMALE HINGE keyelco.com SPACER/STANDOFF ORGANIZER These standoffs mount at front of the board. CAT. NO CAT. NO CAT. NO T THREAD T THREAD T THREAD D DIA L LENGTH L LENGTH L LENGTH Only screws used to fasten board in place or open the hinged board. U M MALE/FEMALE HINGE D DIA S U P MALE/MALE HINGE D DIA S P M P STANDOFF ONLY For Front of Board CAT. NO. 657A 657B E 548F 88 69D 69E 88 CAT. NO D LENGTH These standoffs mount at front of the board. STANDOFF ONLY For Front of Board CAT. NO C 69C LENGTH These standoffs mount at front of the board. STANDOFF ONLY For Front of Board LENGTH Maintain a neat complete inventory of the most frequently used spacers and standoffs in day-to-day operations. Choice of "8" different kits of the most popular spacers and standoffs. An assortment of various sizes and styles in Brass, Aluminum and Nylon with tapped or thru-hole. Metal cabinet designed to be stacked on one another or wall mounted. Clear plastic drawers labeled for easy identification. THE FOLLOWING ORGANIZER KITS ARE AVAILABLE FROM STOCK! /4" ROUND THREADED Brass Zinc Plated Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With thread sizes of 4-40, 6-3 and pcs. Of each size complete with cabinet. KIT. NO. STR-5 Brass Zinc Plated Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With thread sizes of 4-40, 6-3 and pcs. Of each size complete with cabinet. KIT. NO. STH-4 Brass Nickel Plated Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With clearance holes for #4, #6 and #6. 00 pcs. Of each size complete with cabinet. KIT. NO. SPR-3 /4" ROUND CLEAR Nylon 6/6 Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With clearance holes for #4, #6 and #6. 00 pcs. Of each size complete with cabinet. KIT. NO. SPR-8 /4" HEX THREADED /4" ROUND CLEAR Aluminum Iridite Finish Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With thread sizes of 4-40, 6-3 and pcs. Of each size complete with cabinet. KIT. NO. STR-35 Aluminum Iridite Finish Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With thread sizes of 4-40, 6-3 and pcs. Of each size complete with cabinet. KIT. NO. STH- Aluminum Iridite Assortment of 500 pcs. In /4", 3/8", /", 3/4" and " lengths. With clearance holes for #4, #6 and #6. 00 pcs. Of each size complete with cabinet. KIT. NO. SPR-34 /4" HEX MALE/FEMALE Brass Nickel Plated Assortment of 750 pcs. in /", 3/4", ", /4" and /" lengths. With thread sizes of 4-40, 6-3 and pcs. of each size complete with cabinet. KIT. NO. STH-9 47

47 CERTI FIED ISO 900 Q U A L I T Y INSULATED SPACERS/STANDOFFS CERAMIC STANDOFFS Ideal for very high temperature conditions Commercial and military types available Special sizes available upon request : Grade L5 Ceramic Exceptional strength in compression and tension Withstands very high voltage without flashover. Military types meet MIL--00, NL# clearly marked CAT. NO LENGTH COMMERCIAL O.D T THREAD /4-0 /4-0 D() DEPTH THRU CAT. NO LENGTH O.D MILITARY T THREAD / / D() DEPTH NL # NL53W0-004 NL53W0-005 NL53W0-005 NL53W0-006 NL53W0-006 NL53W0-008 NL53W0-008 NL53W NL53W0-00 NL53W0-00 NL53W04-00 NL53W0-0 NL53W0-0 NL53W03-0 NL53W04-0 NL53W0-06 NL53W0-06 NL53W03-06 PHENOLIC SPACERS/STANDOFFS RESISTS ABRASIONS & CHEMICALS EXCELLENT DIELECTRIC STRENGTH LOW MOISTURE ABSORPTION GOOD MECHANICAL STRENGTH : PBE Grade Natural Color Phenolic NYLON SPACERS/STANDOFFS Economical for terminal or printed circuit board supports. ROUND THRU-HOLE SPACERS CLEAR HOLE SPACERS 48 "L" Length Inches /4 (0) 3/8 () / () 3/4 (.750) (.000) / () (.000) THREADED STANDOFFS "L" Length Inches /4 (0) 3/8 () / () 3/4 (.750) (.000) / () (.000) #4 Screw.0 Hole Th'd O.D. (/4).3 O.D. #6 Screw.40 Hole #8 Screw.7 Hole #0 Screw.00 Hole O.D. (/4).3 O.D. 6-3 Th'd Th'd NOTE: /" and " spacers are tapped 3/8" deep each end : Nylon 6/6 : Nylon 6/6 : Nylon 6/6 "L" Length Inches /8 (.5) /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) #4 Screw.0 Hole #6 Screw.40 Hole HEX THREADED STANDOFFS "L" Length Inches /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) 4-40 Thread 90A 90B 90C 90F 90D 90G 90E 6-3 Thread 903A 903B 903C 903F 903D 903G 903E FLAME RETARDANT HEX THREADED STANDOFFS "L" Length Inches /4 (0) 3/8 () / () 5/8 () 3/4 (.750) 7/8 (.875) (.000) 4-40 Thread 8440A 8440B 8440C 8440D 8440E 8440F 8440G 6-3 Thread 844A 844B 844C 844D 844E 844F 844G #8 Screw.7 Hole Thread 904A 904B 904C 904F 904D 904G 904E 8-3 Thread 844A 844B 844C 844D 844E 844F 844G

48 CUSTOM DESIGN WORKSHEET keyelco.com THREADED STANDOFFS CLEAR SPACERS HEX ROUND HEX ROUND HEX O.D. L THREAD ROUND O.D. HEX O.D. L THREAD ROUND O.D. : : FINISH: FINISH: Quantities to Quote: Quantities to Quote: MALE/FEMALE STANDOFFS HEX ROUND HEX O.D. L A TL THREAD : FINISH: Quantities to Quote: For prompt quotations fax, mail or a copy of this worksheet. ROUND O.D. Clearance Hole For Hole Screw Sizes Sizes #.093 (.4) #4.9 (3.0) M3.5 (3.) #6/M (3.7) #8/M4.7 (4.4) #0.97 (5.0) ENGINEERING DATA Thread Depth Reference Thread A TL (4.8).56 (4.0) 4-40/M3 0 (6.3).87 (4.8) 6-3/M3.5 (9.5) 0 (6.3) 8-3/M4.437 (.) (9.5) 0-3 (.7) (9.5) If you have any questions, please contact our application engineers Material Code S AL Aluminum - QQ-Q-5/3 BR Brass - ASTM-B6 NV0 Nylon 6/6 - UL Rated 94V-0 NV Nylon 6/6 - UL Rated 94V- PH Phenolic - PBE Natural Color SS Stainless Steel - ASTM-A58/A58 S Steel - ASTM-08 O Other - Specify Finish Code FINISHES AB Anodize (Black) - MIL-A-865 AC Anodize (Clear) - MIL-A-865 IC Iridite (Clear) - MIL-C-554 IG Iridite (Gold) - MIL-C-554 N Nickel - QQ-N-90 P Passivate - MIL-S-500 T Tin - MIL-T-078 TLD Tin-Lead - MIL-S-500 ZC Zinc (Clear) - ASTM-B633 ZG Zinc (Gold) - ASTM-B633 O Other - Specify CREATE YOUR OWN CONFIGURATION Name: Company: Address: Phone: Fax: : FINISH: QUANTITIES TO QUOTE: 49

49 CERTI FIED ISO 900 Q U A L I T Y LED LENS CAPS & HOLDERS LED LENS CAPS FOR T- AND T- 3 / 4 Designed for use with T- or T- 3/4 LEDs, these Lens Caps are available in round or square configurations. They snap-mount through the front panel for easy, light-finger pressure, installation. The LED is inserted into the cap from behind the panel and held securely in place. The Lens Cap protects the LED from physical damage while guarding the components from electrostatic discharge (ESD), up to 6KV. More economical than indicator light assemblies, the caps feature striated lines and fresnel rings which permit up to 80 viewing angles with either diffused or non-diffused LED s. They provide exceptionally high contrast and visibility. : Polycarbonate Available in Red, Green, Yellow and Clear. ROUND CAPS Fig. Fig. Fig. 3 Fig. 4 Standard Height LED MTG. HOLE MIN. MTG. PANEL FIG. NO. SIZE COLOR SIZE CENTERS THICKNESS 8650 T RED / T GREEN / T YELLOW / T CLEAR / T 3/4 RED 0.06/ T 3/4 GREEN 0.06/ T 3/4 YELLOW 0.06/ T 3/4 CLEAR 0.06/.5 Low Profile LED MTG. HOLE MIN. MTG. PANEL FIG. NO. SIZE COLOR SIZE CENTERS THICKNESS T RED / T GREEN / T YELLOW / T CLEAR / T 3/4 RED 0.03/0* T 3/4 GREEN 0.03/0* T 3/4 YELLOW 0.03/0* T 3/4 CLEAR 0.03/0* Fig. 5 SQUARE CAPS Fig. 6 Fig. 7 Standard Height LED MTG. HOLE MIN. MTG. PANEL FIG. NO. SIZE COLOR SIZE CENTERS THICKNESS T 3/4 RED 0 Sq..06/ T 3/4 GREEN 0 Sq..06/ T 3/4 YELLOW 0 Sq..06/ T 3/4 CLEAR 0 Sq..06/.5 SNAP-IN T- & T- 3 /4 LED HOLDERS Designed for use with T- & T - 3/4 LED s in thick panels. The holder snaps into the front panel with easy, light-finger pressure. The LED snaps into the holder from behind the panel and is held securely in place. Low Profile LED MTG. HOLE MIN. MTG. PANEL FIG. NO. SIZE COLOR SIZE CENTERS THICKNESS T RED / T GREEN / T YELLOW / T CLEAR / T 3/4 RED 0.03/0* T 3/4 GREEN 0.03/0* T 3/4 YELLOW 0.03/0* T 3/4 CLEAR 0.03/0* *When mounting T- 3/4 Low Profile Caps (Fig. 4 or Fig. 7) in panels.5 thick or less a spacer must be used. Spacer 869 : White Nylon 3.8 O.D. x /4 I.D. x /8 Lg. : Nylon 6/6, Black LED MTG. HOLE SIZE A B C SIZE 8309 T T- 3/

50 LED SPACER MOUNTS keyelco.com UNIVERSAL FOR TRI-LEAD T- & T- 3/4 SELF-ALIGNING FOR BI-LEAD T- & T- 3/4 Unique design separates leads and retains Tri-Lead (and/or Bi-Lead) components Designed for PC board mounting of Tri-Lead (and/or Bi-Lead) T- and T- 3 /4 LEDS Provides height control, lead retention and stability Also suitable for mounting lamps, resistors, transistors, diodes, capacitors, etc. These unique, new self-aligning Bi-Lead LED mounting spacers, for T- and T- 3 /4 LEDs, reduce labor costs by simplifying preassembly to the printed circuit board The spacer features an internally tapered barrier which guides the leads and eliminates the possibility of crimping or shorting. The internal configuration also assures positive self-alignment on.00 centers The bosses serve the dual purpose of heat dissipation and easy post soldering cleanup Available in a range of lengths from.0 to.95 long. Molded from 6/6 nylon, UL Rated 94V- Key Features Internal design eliminates crimping or shorting of leads Positive self-alignment of leads on.00 centers Cost and labor saving No special tools required T- 3 /4 T- : Black PVC, UL Rated 94V-0 T- 3 /4 and T- LENGTH LENGTH CAT.NO. L CAT.NO. L : Natural Nylon, UL Rated 94V- T- 3 /4 T- T- 3 /4 T- LENGTH A LENGTH A L REF. L REF

51 CERTI FIED ISO 900 Q U A L I T Y INSTRUMENTATION HANDLES INSTRUMENTATION HANDLES Choice of: Brass or Aluminum Round or Oval These instrumentation handles are manufactured in a wide variety of diameters, lengths, platings and internal thread sizes. They will enhance the look of quality products and equipment and provide the sturdy support needed for contemporary equipment. ROUND OVAL.56,.87, 0,.3 and diameters Mounting centers from 0 to Internal threads 4-40, 6-3, 8-3 and 0-3 Heights from to.750 Brass: per ASTM-B6 Aluminum: QQ-A-35, alloy 606-T6 PLATINGS Brass: Nickel plated per QQ-N-90 Aluminum: Black anodized per MIL-A-865 x.8 diameter Mounting centers from to Internal threads 0-3 Heights form to.000 Brass: per ASTM-B6 Aluminum: QQ-A-35, alloy 606-T6 PLATINGS Brass: Nickel plated per QQ-N-90 Aluminum: Black Anodized per MIL-A-865 HANDLE MOUNTING SCREWS : Stainless Steel Phillips drive pan head machine screws LENGTH DRIVER L THREAD A B SIZE 9900 /4 (0) 990 3/8 () / () 9903 /4 (0) /8 () / () /8 () 9907 / () /4 (.750) /8 () 990 / () /4 (.750) 5

52 ROUND INSTRUMENTATION HANDLES BRASS ALUMINUM A Mtg. Ctrs B Height E Thread D Depth R Radius C Diameter FERRULES FOR ROUND HANDLES To protect and support panel surface BRASS ALUMINUM FOR DIA./THREAD.56/ / /6-3 0/8-3.3/0-3 A B C D E F OVAL INSTRUMENTATION HANDLES ( x.8) BRASS ALUMINUM A Mtg. Ctrs B Height E Thread D Depth R Radius INSTRUMENTATION HANDLES 53 keyelco.com

53 CERTI FIED ISO 900 Q U A L I T Y Spring glide handle, manufactured of black leather like material with chrome plated steel hardware. Handle lies flat on case when not in use. Will not rattle under vibration. Maximum extended height at center line, /4 inches. Mounts with #0-3 screws (not supplied). HANDLES CARRYING HANDLES The retracto link handle manufactured of black leather like material with nickel plated steel hardware. It is internally constructed of rubber impregnated cellulose wound over a spring steel core. Handle folds flat on case when not in use. Mounts with #6 size screws Molded of polypropylene with a leather gran look. Folds flat on case when not in use. Mounts with rivets of #6 screws (not supplied) LENGTH 4-/ 5-/ 6-3/4 "B" 5-3/4 6-5/8 7-7/8 Molded of high impact styrene with steel nickel plated hardware. Folds flat on case when not in use. Mounts with #0-3 screws (not supplied) 8356 COLOR BLACK COLOR BLACK GRAY CONTEMPORARY HANDLES S: Zinc; Finish: Satin brushed, chrome plate

54 PANEL HARDWARE : Stainless Steel per ASTM-A58/A58 THUMB SCREWS CAPTIVE SCREWS SHOULDER SCREWS 4-40 m LENGTH LENGTH SLOTTED LENGTH.5 0 SOCKET LENGTH LENGTH SLOTTED LENGTH SOCKET LENGTH LENGTH SLOTTED LENGTH SOCKET

55 CERTI FIED ISO 900 Q U A L I T Y PANEL HARDWARE STAINLESS STEEL CAPTIVE PANEL SCREWS : Stainless Steel per ASTM-A58/A TH'D S.D S.L W TH'D T.L S.D S.L. ± P.D P.L. ± SHAFT LOCKS (/8" & /4") : Brass, ASTM-B6, Nickel Plate per QQ-N PANEL BEARINGS STANDARD AND MINIATURE : Brass, Nickel Plated (QQ-N-90). Supplied unassembled. PRECISION PANEL NUTS For Volume Controls, Switches, Capacitors, Tip Jacks, etc. : Brass, Nickel Plated (QQ-N-90) A 3.8 B C.437 D.437 THUMB SCREWS For quick removal of panel from chassis. Other variations available : Brass, Nickel Plated (QQ-N-90) E 3/8-3 Standard /4-3 Miniature FOR Mounting Mini. Control Vol. Control Switch Switch Ring Filter THREAD /4-3 /4-3 3/8-3 5/3-3 5/3-3 5/6-3 DIAMETER 3/8 Hex 5/6 Hex / Hex 9/6 Hex 5/8 Knurled 3/8 Hex THICKNESS 3/3" 5/64" 3/3" 5/64" /6" 3/3" THREAD /4" - /4" SHAFT COUPLING : Brass, Nickel Plated (QQ-N-90). Two set screws hold shaft securely. Supplied unassembled. 56 STAINLESS STEEL CAPTIVE SCREW For quick removal of panel from chassis. Other variations available : Stainless Steel per ASTM-A58/A VOLUME CONTROL EXTENDERS For /4" volume control shafts having 3/8-3 threaded bushings. : Brass, Nickel Plated (QQ-N-90). 464 A B

56 INSTRUMENTATION CASES & KNOBS PHENOLIC INSTRUMENT CASES CHOICE OF 8 SIZES STURDY CONSTRUCTION FLUSH MOUNTING PANELS keyelco.com PLASTIC INSTRUMENT CASES LOW COST CHOICE OF 7 SIZES STURDY CONSTRUCTION Economical cases molded of high impact material. Mating cover has interlocking flange on lid, countersunk holes for flush mounting. Internal grooved guides to hold PC boards and circuit cards from.06 to.093 thick. IDEAL FOR PROTOTYPE OR PRODUCTION USAGE Aluminum or Phenolic Panels Available Phenolic Cases:.5 Wall Thickness, Molded Glossy Black Phenolic, MIL-M-4, CFG Phenolic Panels:.06 Thick Glossy Black Phenolic, MIL-P-35C Aluminum Panels:.06 Thick, #505-H34 per QQ 38 C; Bright finished surface with pressure sensitive protective covering tape. Screw Length:.3 for 4-40 screw; for 6-3 screw. Cases supplied with cover and mounting screws PHENOLIC CASE A DIM B DIM C DIM THREAD SIZE AND TYPE 4-40 TAPPED 4-40 TAPPED USE #4 SELF TAPPING SCREW 4-40 TAPPED 6-3 BRASS INSERT 6-3 BRASS INSERT 6-3 BRASS INSERT 6-3 BRASS INSERT PHENOLIC PANEL *037 *05 *038 *039 *.093 Thick ALUMINUM PANEL CASE & COVER A DIM B DIM C DIM Blue Styrene Blue Styrene Blue Styrene Black ABS Blue Styrene Black ABS Blue Styrene INSTRUMENTATION KNOBS SKIRTED ROUND ROUND WITH DIAL DOUBLE BAR SINGLE BAR FIG NO. FIG NO. FIG NO. 3 FIG NO. 4 WITH INDICATOR FIG NO KNOB DIA : ABS with Aluminum Inlay SHAFT DIA TWO () SET SCREWS ROUND TYPE NUT CLEARANCE A +.05/ B MIN C MIN D MAX HOLE DEPTH E MIN F +/ G +/ SKIRTED & DIAL NUT CLEARENCE H MIN J MIN K +.05/ L MAX

57 CERTI FIED ISO 900 Q U A L I T Y PLASTIC FAN FILTER ASSEMBLY Meets UL 0 Plug Gauge Test A unique package consisting of guard, filter media and retainer. The guard and retainer are manufactured with UL rated 94V-0 material. The filter media is made of polyurethane foam (30PPI) and allows free passage of air with minimum air resistance and pressure drop. A major feature of this assembly is that when the filter media requires maintenance you simply remove the snap-fit retainer to clean or replace the filter, leaving the guard attached to the fan. This assures protection to the fan blade and eliminates damage to the fan during cleaning. RETAINER : ABS, UL rated 94V-0 Snap-fit construction Designed for minimum air restriction MEDIA Polyurethane foam material is constructed to allow free passage of air with minimum resistance and pressure drop Has a high surface-area contact for impingement of dust particles 30PPI material gives a wide range of particle filtration (PPI denotes pores per inch) Helps reduce external fan noise Easily cleaned by vacuuming or washing with mild soap, detergent or cleaning solvent GUARD : ABS, UL rated 94V-0 0 maximum ring spacing Decreased noise level due to design Countersunk mounting holes (4) Withstands high impact FAN Customer supplied MEDIA SNAP-FIT RETAINER GUARD FAN (Not Supplied) MINI-FAN GUARD ASSEMBLIES STANDARD FAN GUARD ASSEMBLIES COMPLETE ASSEMBLY Includes: Guard, Media and Retainer For Fan Mtg. A Size Height Thickness Centers Mtg. Hole 8464 / (40mm) / (60mm) FAN GUARD (Only) For Fan Mtg. A Size Height Thickness Centers Mtg. Hole 8466 / (40mm) / (60mm) COMPLETE ASSEMBLY Includes: Guard, Media and Retainer For Fan Mtg. A Size Height Thickness Centers Mtg. Holes /8 (80mm) /8 (9mm) / (0mm) FAN GUARD (Only) For Fan Mtg. A Size Height Thickness Centers Mtg. Holes /8 (80mm) /8 (9mm) / (0mm)

58 FAN/FINGER GUARDS keyelco.com Made of high quality C-00 carbon steel wire which combines strength with superior forming. The units offer clean, strong butt welds with minimum flash and have consistent guard diameters to enhance maximum air-flow and venting. Guards are nickel chrome plated. METAL GUARDS FITS /" FANS 40mm FITS /" FANS 60mm FITS 3 /8" FANS 80mm 8447 CONSTRUCTION Rings:.063 wire dia. Ribs:.063 wire dia. CONSTRUCTION Rings:.063 wire dia Ribs:.063 wire dia CONSTRUCTION Rings:.063 wire dia. Ribs:.07 wire dia FITS 3 5/8" FANS 9mm FITS 4 /" FANS 0mm FITS 4 /" FANS 0mm 845 CONSTRUCTION Rings:.063 wire dia. Ribs:.07 wire dia CONSTRUCTION Rings:.063 wire dia Ribs:.063 wire dia 845 CONSTRUCTION Rings:.07 wire dia. Ribs:.09 wire dia. FITS 4 /" FANS 0mm FITS 6" FANS 50mm FITS 0" FANS 54mm 8453 CONSTRUCTION Rings:.07 wire dia. Ribs:.07 wire dia CONSTRUCTION Rings:.07 wire dia. Ribs:.09 wire dia CONSTRUCTION Rings:.09 wire dia. Ribs:.09 wire dia. 59

59 CERTI FIED ISO 900 Q U A L I T Y THREADED MOUNTING BRACKETS 4-40 THREAD 4-40 THREAD 4-40 THREAD 6.06 Steel Zinc Plate 6.06 Steel Zinc Plate Brass Tin Plate 6-3 THREAD 6-3 THREAD 6-3 THREAD Brass Nickel Plate Brass Tin Plate Brass Tin Plate 6-3 THREAD 6-3 THREAD 6-3 THREAD Steel Nickel Plate Steel Nickel Plate Steel Tin Plate 6-3 OR 8-3 THREAD 8-3 THREAD 8-3 THREAD A 433 # # Brass Nickel Plate Brass Tin Plate Steel Tin Plate 60

60 CLEAR HOLE MOUNTING BRACKETS BOARD BRACKETS Originally designed for our line of standardized terminal boards; these brackets can also be used in other applications. UNIVERSAL BRACKETS A wide variety of brackets for various mounting applications. keyelco.com Choice of Steel or Aluminum :.06 Steel, Nickel Plate.06 Aluminum & N size batteries STANDARD BRACKETS (Brass and Steel) Steel Alum W 3/8 3/8 3/8 3/8 9/3 9/3 L 5/8 /8 5/8 3 /8 3/6 5/8 S / / 3/4 3/6.06 STEEL NICKEL PLATE For Use With Board No's (see page 98) L 5 /8 3 / W 3 /8 9 /6 Selection of Brackets with Clear Holes D E Hole Hole T A B C D Dia. E Dia. Material Finish Brass Nickel Brass Nickel Brass Tin Steel Nickel Steel Nickel Brass Tin Steel Tin Steel Nickel Steel Tin.06 STEEL NICKEL PLATE.050 STEEL NICKEL PLATE.080 ALUMINUM Overall Length "L" 3 /8 7 /8 3 3 /8 Spacing "S" / / 435 BOARD SUPPORT BRACKETS : Brass, Zinc Plate A sturdy support for mounting of standardized terminal boards CUSTOM STAMPING AND ASSEMBLY Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special stamping & assembly furnished promptly upon receipt of sample, sketch, print or CAD drawings. 6

61 CERTI FIED ISO 900 Q U A L I T Y COMPUTER BRACKETS EISA/ISA or PCI These printed circuit card brackets have been designed to fit all PC computers and are available with a variety of holes and cutouts to connect any peripheral. The standard brackets shown reflect the most common configurations and cutouts for specific applications. If our standard brackets do not suit your applications we can fabricate a bracket to your exact requirements. (See page 65) These premium quality brackets have a high luster finish for appearance and durability. Premium quality Designed to fit all PC computers Standard brackets available for most common configurations A variety of holes and cutouts to suit all peripherals Special configurations available to meet specific needs Standard international symbol markings available Blanks available for fillers Fast delivery and cost effective tooling for special designs :.03 Steel, Nickel Plate STANDARD BLANKS & BRACKETS EISA/ISA or PCI Reinforced with rib for extra strength EISA/ISA PCI PCI SECURITY BRACKET To deter PC theft

62 STANDARD COMPUTER BRACKETS Note: For panel cutout dimensions see page 64 m USB A/V SOUND 5 PIN 5 PIN 9 PIN EISA/ISA or PCI PCI EISA/ISA EISA/ISA EISA/ISA PCI EISA/ISA For Bracket Dimensions For Bracket Dimensions 900- Refer To Cat. No. 900 Refer To Cat. No For Bracket Dimensions For Bracket Dimensions 900- Refer To Cat. No. 900 Refer To Cat. No For Bracket Dimensions For Bracket Dimensions Refer To Cat. No. 900 Refer To Cat. No For Bracket Dimensions For Bracket Dimensions Refer To Cat. No. 900 Refer To Cat. No For Bracket Dimensions For Bracket Dimensions 904- Refer To Cat. No. 904 Refer To Cat. No For Bracket Dimensions 90- For Bracket Dimensions Refer To Cat. No. 90 Refer To Cat. No For Bracket Dimensions For Bracket Dimensions Refer To Cat. No. 900 Refer To Cat. No PCI PCI PCI EISA/ISA PCI 50 PIN 68 PIN 50 PIN 68 PIN ISDN SCSI SCSI, 3 & 4 MODEM NETWORK 63

63 CERTI FIED ISO 900 Q U A L I T Y BRACKET CUTOUTS & MARKINGS TYPE 9 STANDARD PANEL CUTOUTS TYPE 5 TYPE 5 TYPE 9A TYPE 5A TYPE 5A TYPE 37 SCSI 50 PIN SCSI, 3 or 4 50 PIN TYPE 37A SCSI 68 PIN SCSI, 3 or 4 68 PIN BNC ROUND USB RJ RJ45 RECOMMENDED SIZES PS/ =.650 Stereo Jacks =.80 Mini-Din =.400 to.650 Phono Jacks =.400 IEEE 394 FIREWIRE STAMPED IDENTIFICATION MARKINGS AUDIO IN VGA IN VIDEO IN INPUT PHONE AUDIO OUT VGA OUT VIDEO OUT OUTPUT LINE LINE IN SVIDEO IN CAMERA IN MIC HAND SET LINE OUT SVIDEO OUT TUNER OUT S/P DIF ISDN 64

64 COMPUTER BRACKETS WORKSHEET keyelco.com CUSTOM BRACKET WORKSHEET PCI with tabs PCI EISA/ISA EISA/ISA with tabs 903 Blank 900 Blank 90 Blank 90 Blank (Ribbed) NOTE: Reference page 6 for overall blank dimensions If you do not have your own drawing, please use the worksheet provided. Step : Select a standard blank configuration PCI or EISA/ISA, with or without tabs. Step : If you ve selected a standard blank with tabs and the tab locations do not meet your requirements, indicate the dimensions in the boxes. Step 3: Select your standard panel cutouts (page 64) and place them on your selected drawing. Step 4: Use Datum s X and Y on drawing, to indicate the precise location of the center lines of the cutout(s). Step 5: For stamped identification markings (page 64) indicate the approximate location(s). Step 6: Quantities Required: If you have any questions, please contact our application engineers. Name: Title: Company: Address: Phone: Fax: For prompt quotations fax, mail or this worksheet. 65

65 CERTI FIED ISO 900 Q U A L I T Y IEEE 394 PLUGS & SOCKETS HI-SPEED SERIAL BUS IEEE 394 SOCKETS FIREWIRE THE HI-SPEED JACK FOR THE ST CENTURY FEATURES Snap-In PC tails hold connector in position for soldering Tin Lead Plated solder tails for excellent solderability Gold Plated contacts for low contact resistance and excellent reliability Shell: Phosphor Bronze Insulator: Thermoplastic, Rated UL 94V-0 Contacts: Phosphor Bronze Plating: Contact Area: Gold Flash over Nickel Solder Tails: Tin Lead over Nickel ELECTRICAL CHARACTERISTICS Rated Voltage: 30VAC (RMS) Contact Current Rating: Amp DC max. Contact Resistance: 5 mω Insulation Resistance: 000 MΩ min. Dielectric Withstanding Voltage: 750V AC for minute Operating Temperature: 3 F (0 C) to 04 F (40 C) Capacitance: pf max. MECHANICAL CHARACTERISTICS Durability: >500 cycles Mating Force: 35 Newtons max. Withdrawal Force: 0 Newtons min. DESIGN ADVANTAGES Superfast Data Transfer: Current speeds of 00Mbps, 00Mbps and 400Mbps, and roadmapped to GB to 3. GBps per second Daisy Chaining: Up to 63 devices, each one acts as an active repeater on the bus, with a maximum of 6 repeats Port Expansion: Alleviates restriction of limited COM Ports and available IRQ s Wide Bandwidth: Operates in asynchronous or isochronous data streams. Digital interface designed for high speed applications for PC peripherals, consumer electronics and communications. Simple Connections: True Plug and Play no jumpers, DIP Switches or IRQ s to set Hot Swapping: Allows peripherals to be connected or disconnected without turning off computer Highly Versatile Bus: One bus can handle a variety of devices operating at different speed classes for true backwards compatibility Standard Digital Interface: Allows consumer electronics and computer devices to communicate together on one interface DEVICE APPLICATIONS Broadcast TV Cable TV Digital Camcorders Digital Cameras & VCRs Computers & Hard Disks DVD Players Printers & Monitors Stereos SURFACE MOUNT HORIZONTAL THRU-HOLE MOUNT UP-RIGHT THRU-HOLE MOUNT HORIZONTAL IEEE 394 PLUG FIREWIRE FEATURES Modular design allows easy and fast assembly of components Integrated strain relief - crimps to wire insulation Tin Lead Plated solder tails for excellent solderability Gold Plated contacts for low contact resistance and excellent reliability 98 (Supplied Unassembled) Shell: Phosphor Bronze Insulator: Thermoplastic, Rated UL 94V-0 Contacts: Phosphor Bronze Plating: Contact Area: Gold Flash over Nickel Solder Tails: Tin Lead over Nickel ELECTRICAL CHARACTERISTICS Contact Resistance: 30mΩ max. Insulation Resistance: 00 MΩ min. Withstanding Voltage: 500V ± 50V DC Operating Temperature: 3 F (0 C) to 04 F (40 C) 66

66 USB PLUGS & SOCKETS keyelco.com UNIVERSAL SERIAL BUS SOCKETS FEATURES Snap-In PC solder tails hold connector in position for wave soldering Tin Lead Plated solder tails for excellent solderability Gold Plated contacts for low contact resistance and excellent reliability Shell: Phosphor Bronze Insulator: Thermoplastic, UL 94V-0 Contacts: Phosphor Bronze Contact Area: Gold Flash over Nickel Solder Tails: Tin Lead over Nickel ELECTRICAL CHARACTERISTICS Rated Voltage: 30V (RMS) Contact Current Rating: Amp DC max. Contact Resistance: 5 mω max. Insulation Resistance: 000MΩ min. Dielectric withstanding Voltage: 750V AC for minute Operating Temperature: -3 F (-5 C) to 76 F (+80 C) DESIGN ADVANTAGES Port Expansion: Alleviates restriction of limited COM Ports and available IRQ s Daisy Chaining: Up to a max of 7 devices to the root hub Fast Data Transfer: Up to Mbps; 3-5 times faster than parallel devices and 0-40 times faster than serial ports Hot-Swapping: Allows peripherals to be connected or disconnected without turning off computer Simple Connections: True Plug and Play; No jumper, DIP Switches or IRQ s to set True Digital Audio: Allows USB Speakers to BYPASS the sound card and receive true digital audio sound quality DEVICE APPLICATIONS Ability to daisy chain more than one input device Mouse Trackball Keyboards Printers Joysticks Modems Scanners Digital Cameras Telephones Fingerprint I.D. Systems Digital Speakers: Connect directly with the computer for true digital audio clarity SINGLE A-TYPES DUAL A-TYPE HORIZONTAL VERTICAL DUAL STACKING B-TYPE HORIZONTAL USB PLUGS A-TYPE B-TYPE Shell: Steel, Tin Plated Insulator: Thermoplastic, Rated UL 94V-0 Contact: Bronze, Gold Flash over Nickel Supplied Unassembled

67 CERTI FIED ISO 900 Q U A L I T Y AUDIO JACKS & F CONNECTORS Mates with.5mm and 3.5mm plugs Designed for reliable interface with audio equipment including computer speakers, headphones, sound cards, cell phones, etc. Models available for mono and stereo applications Low profile, surface mount design FOR.5mm PLUGS SURFACE MOUNT STEREO JACKS Supplied on Tape and Reel Housing: Polyamide, Rated UL 94V-0 Ground Terminal:.0 Brass, Gold Flash ➀ Spring Contacts:.008 Phosphor Bronze, Gold Flash ➁ ➄ Shunt Terminals:.0 Brass, Gold flash ➂ ➃ FOR 3.5mm PLUGS Pad Layout STEREO SCHEMATIC Pad Layout MONO SCHEMATIC 980TR (Stereo) Tape Spec s: 4mm wide; 6mm pitch 98TR (Mono) Reel Spec s: 5 inch reel (,000 pieces per reel) 98TR (Stereo) 983TR (Mono) Tape Spec s: 4mm wide; 6mm pitch Reel Spec s: 5 inch reel (800 pieces per reel) COLOR KEYED PC PHONO JACKS SCHEMATIC Mates with.5 diameter pins Features a normally closed circuit Various colors for circuit identification Snap-fit mounting for positive retention during wave soldering COLOR 970 WHITE 97 RED 97 BLACK 973 YELLOW Housing: PBT Ground Terminal:.00 Brass, Nickel Plate ➀ Spring Contact:.0 Phosphor Bronze, Silver Plate ➂ Shunt Terminal:.06 Brass, Silver Plate ➃ F FEMALE CONNECTORS SNAP-FIT PC MOUNT Low profile Snap-fit mounting for positive retention during wave soldering Rugged, stable construction facilitates reliable mating High reliability, manufactured using Nickel Plated Brass bodies and Tin Plated Phosphor Bronze contacts Supplied with washer and nut PANEL MOUNT Anti-rotation design Rugged construction facilitates reliable mating High reliability, manufactured using Nickel Plated Brass bodies and Tin Plated Phosphor Bronze contacts Supplied with washer and nut

68 PC PHONO JACKS keyelco.com NOTE: All jacks on this page mate with /8" diameter pins. SNAP-FIT 90º PC PHONO JACK CHOICE OF TIN OR GOLD PLATE Complete on piece jack for insertion into PC board. Time Saving. No Wiring Required. Snap-fits into PC board. SNAP-FIT VERTICAL PC PHONO JACK Extra long, one piece shell to accept plugs with longer pins for greater contact. Snaps into holes on PC Board and firmly held for soldering. No staking required. Shell: Steel Contact: Brass Plating: Tin or Gold 90 ( TIN PLATE) 900 (GOLD PLATE) 90 PC PHONO JACK Shell: Steel Contact: Brass Plating: Tin 577 SNAP-FIT VERTICAL PC JACK Snaps into holes on PC Board and firmly held for soldering. No staking required. Shell: Steel - Nickel Plate Contact: Brass - Tin Plate PC PHONO JACK Mounted on bracket ready for insertion into pre-drilled holes Shell: Steel Contact: Brass Plating: Tin 57 VERTICAL PC PHONO JACK For applications requiring staking to product Shell: Steel Contact: Brass Plating: Tin 57 Shell: Steel Contact: Brass Plating: Tin

69 CERTI FIED ISO 900 Q U A L I T Y PLUGS & JACKS PANEL MOUNT PHONO JACKS Mats with /8" diameter pin Color coded for ease of identification Mounts to panel in.96 Dia. Hole Complete with nut and soldering lug : Brass, Nickel Plate ROUND BASE HEX BASE BNC TO DUAL BANANA PLUGS BNC MALE TO DUAL BANANA PLUGS Body: Molded Plastic Connector: Brass, Nickel Plate Center Contract: Brass, Gold Plate Banana Plug: Beryllium Copper, Nickel Plate 700 BNC FEMALE TO DUAL BANANA PLUGS 580 (RED INSULATOR) 574 (BLACK INSULATOR) 576 (BLACK INSULATOR) RIVET TYPE PHOTO JACKS Mates with /8" diameter pin Rivet type-mounts in.96 Dia. Hole Available for /6" 3/3" /8" thick Body: Molded Plastic Connector: Brass, Nickel Plate Center Contract: Brass, Gold Plate Banana Plug: Beryllium Copper, Nickel Plate 70 BNC MALE TO DUAL BINDING POSTS (BLACK & RED) CAT. INSULATOR NO. A H THICKNESS / / /8 Shell: Steel Contract: Brass Plating: Tin PHONO PLUGS Mates with /8" diameter jacks : Shell: Steel, Tin Plate Pins: Brass, Nickel Plate Body: Molded Plastic Connector: Brass, Nickel Plate Center Contract: Brass, Gold Plate Banana Plug: Brass, Nickel Plate 70 Longer Skirt for Better Grip Strain Relief Lug Crimps to Wire Insulation Conventional Type Crimp or Solder Type Extra Long Handle

70 BINDING POSTS keyelco.com All Keystone binding posts are designed to prevent accidental contact with current carrying parts. They feature a "limited opening" captivated head to insure safety. Ideal for audio circuitry, R.F. Circuitry, oscilloscopes, power supplies and various other applications. STANDARD BINDING POST These multi-purpose binding posts feature high current rating, captivated heads and anti-rotation stud mounting. NOTE: Binding Posts accept.75" Banana Plugs,.080" Tip Plugs, Spade Lugs, Alligator Clips, Wires and EZ hooks. MINIATURE FLUTED HEAD Rated 5 Amperes, 000 VAC Working. Stud: Brass per ASTM B-6 Nylon Insulation. Choice of Gold or Tin Plate. Stud: Brass per QQ-B-66 Finish: Silver Plate Insulation: Nylon RATINGS Current: 5 Amps Breakdown voltage: 5700 VRMS Stud to panel capacitance: 3.3 pf Nominal FOR PANELS UP TO.8" THICK COLOR RED BLACK GOLD PLATE COLOR RED BLACK TIN PLATE COLOR RED BLACK ECONOMY BINDING POST Rated 5 Amps, 000 VAC working. Stud: Brass per ASTM -B6 Finish: Nickel Plate Insulation: Nylon STANDARD HEX HEAD Rated 30 Amperes, 000 VAC Working. Nylon Insulation. Stud: Brass per ASTM B-6. Choice of Gold or Tin Plate. FOR PANELS UP TO.33 THICK COLOR RED BLACK GOLD PLATE TH'D COLOR RED BLACK RED BLACK TIN PLATE TH'D COLOR RED BLACK RED BLACK STANDARD DUAL HEAD Rated 30 Amperes, 000 VAC working. Studs: Brass per ASTM B-6. Nylon Insulation. Mounts in holes on.750 centers. Supplied with: Red- Black head. Choice of Gold or Tin Plate. DUAL BANANA PLUGS Spring: Nickel Silver. Body: Brass per ASTM B-6. Finish: Nickel Plate. Insulation: Molded Nylon..750 Mounting Centers. Breakdown: 3500 VRMS GOLD PLATE THREAD TIN PLATE THREAD SOLDERLESS WITH SET SCREW COLOR RED BLACK 7

71 CERTI FIED ISO 900 Q U A L I T Y MINIATURE RIVET BANANA PLUGS STANDARD RIVET EXTERNAL THREAD.0 PLUG.75 PLUG.75 PLUG Spring: Beryllium Copper Body: Brass, Silver Plate 45 EXTERNAL THREAD Spring: Beryllium Copper Body: Brass, Nickel Plate L.87.8 EXTERNAL THREAD Spring: Beryllium Copper Body: Brass, Nickel Plate 65 INTERNAL THREAD.75 PLUG Spring: Beryllium Copper Body: Brass, Nickel Plate 653 MINI INUSLATED SOLDER CONNECTION Supplied with lug and nut Unassembled Spring: Nickel Silver Body: Brass, Nickel Plate D P H /8 / 3/4 S.750 T /4-8 STANDARD INSULATED SOLDERLESS CONNECTION Supplied with screw and lug Unassembled Spring: Nickel Silver Body: Brass, Nickel Plate D P H.937. T STANDARD INSULATED SOLDERLESS CONNECTION.0 PLUG MINIATURE.75 PLUG.75 PLUG Spring: Beryllium Copper, Nickel Plate Body: Brass, Nickel Plate Handle: Nylon COLOR RED BLACK Spring: Nickel Silver Body: Brass, Nickel Plate Handle: Nylon COLOR RED BLACK Spring: Nickel Silver Body: Brass, Nickel Plate Handle: Nylon COLOR RED BLACK 7

72 BANANA PLUGS & JACKS STD INSULATED PLUG STD INSULATED PLUG SOLDERLESS WITH SET SCREW SOLDER CONNECTION keyelco.com STD INSULATED JACK FULLY INSULATED.75 PLUG Spring: Nickel Silver Body: Brass, Nickel Plate Handle: Nylon.75 PLUG Spring: Nickel Silver Body: Brass, Nickel Plate Handle: Nylon ACCEPTS.75 PLUG Body: Nylon Contact: Brass, Tin Plate COLOR RED BLACK COLOR RED BLACK COLOR RED BLACK STD INSULATED JACK SOLDER CONNECTION NON-INSULATED JACKS (STAKING) MINIATURE STANDARD ACCEPTS.75 PLUG Supplied with lug and nut Unassembled Body: Brass, Nickel Plate Terminal: copper, Tinned Hex Head: Nylon COLOR RED BLACK ACCEPTS.0 PLUG MINIATURE : Brass, Tin Plate L ACCEPTS.75 PLUG : Brass, Nickel Plate L STANDARD NON-INSULATED JACKS RECESSED HEAD Fits panel up to 5/6" thick STANDARD HEAD Fits panel up to 3/8" thick Will accept.75 plug. Complete with hex nut and lug. Unassembled. : Body: Brass, Nickel Plate Rating: 5 Amps Terminal: Brass, Tin Plate MINIATURE JACK NON-INSULATED ACCEPTS.0 PLUG Supplied with lug and nut Unassembled Body: Brass, Nickel Plate Terminal: Copper, Tinned

73 CERTI FIED ISO 900 Q U A L I T Y PLUGS & JACKS FULLY-INSULATED DELUXE TIP JACK ACCEPTS.080" TIP (WITH CLOSED ENTRY CONTACT) Fully molded body with recessed closed entry design. Assures maximum retention with.0ωmaximum contact resistance. Prevents accidental insertion of larger diameter probes. Current rating: 0 Amps. Breakdown voltage 5700 VRMS. Capacitance to metal panel.0 pf nominal. Supplied with nut. FULLY-INSULATED STANDARD TIP JACK ACCEPTS.080" TIP Economical tip jacks with molded Nylon body. Low contact resistance. Formed phosphor bronze contact with solder hole for ease in attaching wire. Current rating 0 Amps. Breakdown voltage 5700 VRMS. Capacitance to metal panel 3.8 pf. Supplied with nut. Body: Molded Nylon ASTM D4066 Contact: Beryllium Copper, Silver Plate Terminal: Brass, Tin Plate SELECTION OF COLORS COLOR 6030 WHITE 603 RED 603 BLACK 6033 GREEN 6034 YELLOW 6035 BLUE METAL-CLAD TIP JACK (MIL) METAL-CLAD TIP JACK (STD) UNINSULATED TIP JACK ACCEPTS.080" TIP (WITH CLOSED ENTRY CONTACT) High quality tip jack for high reliability industrial applications. Ideal for use where required to withstand severe environmental conditions, temperature, vibration and salt spray. Recessed closed entry contact. Current rating: 5 Amps. Breakdown voltage: 5700 VRMS. Made to MS-608 Rev. F of MIL-STD-4A and MIL-C3904/0. Capacitance to metal panel.0 pf. Supplied complete with hardware. Body: Molded Nylon ASTM D4066 Contact: Phosphor Bronze, Tin Plate ACCEPTS.080" TIP Molded Nylon body with metal jacket. Contact is formed from phosphor bronze with solder hole for ease in attaching wire. Designed for positive contact, easy insertion and withdrawal. Current rating: 0 Amps. Breakdown voltage: 5700VRMS. Capacitance to metal panel 3.8 pf. Supplied with nut. SELECTION OF COLORS COLOR 608 WHITE 609 RED 600 BLACK 60 GREEN 60 YELLOW 603 BLUE ACCEPTS.080" TIP Quality, precision machined tip jack made of brass. Ideal for use on metal panels where grounding is required. Fits panels up to 3/8" thk. Complete with hex nut. Body: Molded Nylon ASTM D4066 Shell & Nut: Brass QQ-B-66 Nickel Plate QQ-N-90 Contact: Beryllium Copper PER QQ-C-533. Gold Plate MIL-G-4504 SELECTION OF COLORS COLOR 60 WHITE 603 RED 604 BLACK 605 GREEN 606 YELLOW 607 BLUE Body: Molded Nylon ASTM D4066 Shell: Brass, Nickel Plate Contact: Phosphor, Bronze Silver Plate SELECTION OF COLORS COLOR 604 WHITE 605 RED 606 BLACK 607 GREEN 608 YELLOW 609 BLUE Body: Brass, Nickel Plate Contact: Beryllium Copper Rating: 5 Amps 6097 CUSTOM PLUGS & JACKS Keystone is fully integrated to meet your total design & production needs. Manufacturing custom designs & modifications of standard items is our specialty. Quotations on special Plugs and Jacks furnished promptly upon receipt of sample, sketch, print or CAD drawings. 74

74 VERTICAL PC TEST JACK TEST JACKS ACCEPTS.080" TIP This low profile vertical jack allows dense packaging where space is limited. Mounts into a.05" diameter hole. Provides easy access and positive electrical contact. The contact is recessed to prevent accidental shorting. Capacitance between two adjacent jacks less than.0 pf at MHz. Operating voltage is 500 Volts RMS. Current rating 5 Amps max. SNAP-IN VERTICAL PC TEST JACK ACCEPTS.080" TIP Low cost, compact and dependable snap-in vertical test jack features a unique spring shank which retains the jack throughout wave soldering procedure. Ideal for use on circuit boards of audio, digital and R.F circuitry. Contact recessed to prevent accidental shorting. Current rating: 5 Amps. Operating voltage 500 Volts RMS. Capacitance between two adjacent jacks less than.0 pf at MHz. MOUNTING: Snap-fits into.05 hole m ACTUAL SIZE Body: Nylon per ASTM D4066 Contact: Brass, Silver Plate SELECTION OF COLORS COLOR 6036 WHITE 6037 RED 6038 BLACK 6039 YELLOW 6040 GREEN 604 BLUE ACTUAL SIZE Body: Nylon per ASTM D4066 Contact: Beryllium Copper, Silver Plate SELECTION OF COLORS COLOR WHITE RED BLACK YELLOW GREEN BLUE MINIATURE HORIZONTAL PC TEST JACK ACCEPTS.080" TIP Space saver test jack designed for use where space is a limiting factor. Half the size of standard jacks. Accepts.080" tip plug in either end. Mounts on.00" centers in.05" holes. Can be spaced side by side on.60" centers minimum. Two common terminals. Current: 5 Amps. Breakdown voltage: 00 VRMS, Capacitance.0 pf maximum. UNIVERSAL HORIZONTAL PC TEST JACK ACCEPTS.080" TIP This universal design accepts.080" tip plug in either end, or from top or bottom. Top contact will also accept hook-type oscilloscope probe. Two common terminals. Current rating: 5 Amps. Breakdown woltage: 00 VRMS Capacitance.0 pf maximum. Mounts on.400" centers in.05" holes. Side by side mounting on.60" centers. ACTUAL SIZE Body: Nylon per ASTM D4066 Contact: Beryllium Copper Silver Plate SELECTION OF COLORS COLOR WHITE RED BLACK YELLOW GREEN BLUE ACTUAL SIZE Body: Nylon per ASTM D4066 Contact: Beryllium Copper Silver Plate SELECTION OF COLORS COLOR WHITE RED BLACK YELLOW GREEN BLUE Body: Nylon per ASTM D4066 Contact: Beryllium Copper, Silver or Gold Plate LOW PROFILE HORIZONTAL PC TEST JACK ACCEPTS.080" TIP This low profile double-entry design is recognized for its dependability, and allows dense packaging on.60" centers. Side by side mounting. Closed entry design for use with.074 to.084 dia. tips. Reliability is designed into this rugged low cost jack. Mounts on.400" centers in.05" holes. Current rating: 5 Amps. Breakdown voltage 00 VRMS. Contact resistance.00ωmaximum. Choice of Gold or Silver Plate Contacts WITH GOLD PLATING SELECTION OF COLORS COLOR WHITE RED BLACK YELLOW GREEN BLUE WITH SILVER PLATING SELECTION OF COLORS COLOR WHITE RED BLACK YELLOW GREEN BLUE ACTUAL SIZE 75

75 CERTI FIED ISO 900 Q U A L I T Y TEST TIPS & PLUGS : FORCE FIT SOLDERLESS TIPS SENIOR JUNIOR Tips: Brass, Nickel Plate Handles: Nylon 6/6, Available in Red or Black Rating: 0 Amps AC for 0º0ºº C temperature rise, continuous duty SOLDERLESS DIA. TIP PLUGS Fully insulated molded nylon sleeve. Maximum reliability with minimum contact resistance. Recessed metal head eliminates possibility of shock or grounding. Designed for solderless connection of up to 6 gauge stranded wire which fits through handle and tip and is secured by screwing handle tight. Current rating 0 Amps. Fits all standard tip jacks SELECTION OF COLORS COLOR WHITE RED BLACK COLOR GREEN YELLOW BLUE THREADED SOLDERSLESS TIP SENIOR JUNIOR MINIATURE DIA. TIP PLUGS Designed for miniaturization where space is critical. Solder lead connection. Maximum reliability with minimum contact resistance. Base of tip is recessed to eliminate shock or grounding. Fits horizontal tip jacks. Current rating: 0 Amps INSULATED SOLDERLESS TIP SENIOR JUNIOR SELECTION OF COLORS COLOR WHITE RED BLACK STREAMLINE TIPS COLOR GREEN YELLOW BLUE 660- RED 66- BLACK HEAVY DUTY 670- RED 67- BLACK NEEDLE TIPS 65 - RED 66 - BLACK STANDARD PHONE TIPS A Ideal for replacement tip for headset, speaker, or extension cord. Cat. No. 60 Tip accommodates heavier wire RED BLACK TIP ONLY RED BLACK TIP ONLY

76 LUGS & TERMINALS LOCKWASHER TERMINAL LUGS m "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).08 Brass, Tin Plate SOLDER TERMINAL LUGS "H" DIM.0 (#4).40 (#6).7 (#8).05 Brass, Tin Plate Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).00 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8).00 Brass, Tin Plate TERMINAL LUGS CRIMP TERMINAL LUGS 680 :.05 Brass, Tin Plate "H" DIM.0 (#4).40 (#6).7 (#8) :.00 Brass, Tin Plate 7339 :.00 Copper, Tin Plate QUICK-FIT FEMALES "A" DIM :.00 Brass, Tin Plate : Tinned Brass CAT.NO "A" DIM TAB SIZE "B" DIM LENGTH AWG SIZE.0 X X X.00 0 X MAT'L THICK "H" DIM.40 (#6).7 (#8) :.00 Brass, Tin Plate 77

77 CERTI FIED ISO 900 Q U A L I T Y NON-INSULATED SOLDERLESS TERMINALS Solderless Terminals are made of pure electrolytic (ETP) cooper and tin plated. Insulation is color coded vinyl. RING TONGUE BUTTED SEAM VINYL INSULATED Hand Crimp Tool 345 Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 /0 FOR STUD SIZE W C L E THK BARREL LENGTH I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) FOR STUD SIZE W C L E THK BARREL LENGTH I.D MAX. INSUL. DIA BLOCK SPADE BUTTED SEAM NON-INSULATED VINYL INSULATED Hand Crimp Tool 345 Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 /0 FOR STUD SIZE W C L E THK BARREL LENGTH I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) FOR STUD SIZE W C L E THK BARREL LENGTH I.D MAX. INSUL. DIA NON-INSULATED FLANGED BLOCK SPADE BUTTED SEAM VINYL INSULATED Hand Crimp Tool 345 Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 /0 FOR STUD SIZE W C L E THK BARREL LENGTH I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) FOR STUD SIZE W C L E THK BARREL LENGTH I.D MAX. INSUL. DIA

78 SOLDERLESS TERMINALS Solderless terminals are made of pure electrolytic (ETP) copper annealed and tin plated. Insulation is color coded vinyl. SNAP-SPACE BUTTED SEAM keyelco.com NON-INSULATED VINYL-INSULATED Hand Crimp Tool 345 Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 /0 FOR STUD SIZE W C L E THK BARREL LENGTH I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) FOR STUD SIZE W C L E THK BARREL LENGTH I.D MAX INSUL. DIA QUICK SLIDE BUTTED SEAM FEMALE NON-INSULATED FEMALE VINYL INSULATED Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 MATES WITH MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 L LENGTH Hand Crimp Tool 345 BARREL I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) MATES WITH MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 0 x.03 L BARREL LENGTH I.D MAX INSUL. DIA MALE NON-INSULATED MALE VINYL INSULATED Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 6/4 /0 MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 0 x.03 L LENGTH.4.4 BARREL I.D CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 0 x.03 L BARREL LENGTH.4.4 I.D MAX INSUL. DIA FEMALE FULLY INSULATED NYLON Hand Crimp Tool 345 MALE FULLY INSULATED NYLON Hand Crimp Tool 345 CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) MATES WITH MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 0 x.03 L W D BARREL LENGTH I.D MAX INSUL. DIA CAT. NO WIRE RANGE (AWG) /8 (Red) 6/4 (Blue) /0 (Yellow) MALE TAB WIDTH x THK.87 x.00 0 x x.00 0 x.03 0 x.03 L W D BARREL LENGTH.4.4 I.D MAX INSUL. DIA

79 CERTI FIED ISO 900 Q U A L I T Y STANDARDIZED TERMINALS STYLES Single, double and triple turrets Double-ended (feed thru) Split-type (fork) Tubular (hollow) Swage and thread mounting types available Bright Tin plated for extended shelf life and excellent solderability Wide variety of sizes to suit space and wire requirements ORDERING INFROMATION Keystone standardized terminals are available for various board thicknesses. To specify a terminal, select the "" and "DASH NUMBER" that corresponds with the board thickness to be used. DASH NUMBERS ('T' Dimension") - for.03 Thick Board - for.06 Thick Board -3 for.093 Thick Board -4 for.5 Thick Board Example: 503- for.03 Thick Board 503- for.06 Thick Board Material: Free Cutting Brass - ASTM-B6 Plating: Bright Electro-Tin per MIL-T077 Type. Other platings available upon request (Silver, Gold, Tin/Lead, Hot Tin Dip). SPECIAL TERMINALS Custom terminals can be manufactured to your specifications. Complete facilities available to meet your production requirements. Quotations on special terminals furnished promptly upon receipt of sample, sketch or print. CUSTOM BUILT TERMINAL BOARDS We are specialists in the assembly of terminals, eyelets, clips and special hardware. Quotations on special terminal boards furnished promptly upon receipt of sample, sketch or print. Assembly service using customer supplied materials also available. (See pages 97-0 for standard terminal boards.) STAKING TOOLS For easy mounting of terminals to insulators and PC boards. Standard and "special order" staking tools are available. Cat. No. "TL" designates a tool consisting of a TOP STAKING PUNCH and a BOTTOM ANVIL. Manufactured from steel with zinc plate. Punch and anvil are precision machined and hardened to insure long life. CUSTOM STAKING TOOLS Custom prototype and production staking tools can be furnished for Single-End, Double-End, Fork Terminals, Extruded Lugs, Eyelets, Rivets, etc. Contact our engineering department for details SINGLE DOUBLE & TRIPLE TURRET SERIES L T STAKING TOOL NO. TL L T STAKING TOOL NO. Special Order L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL SPLIT-TYPE (FORK) SERIES L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. Special Order 80

80 STANDARDIZED TERMINALS keyelco.com L T STAKING TOOL NO. Special Order L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. Special Order TUBULAR (HOLLOW) AND DOUBLE-ENDED (FEED THRU) TURRET SERIES L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. Special Order L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL L T STAKING TOOL NO. TL TURRET TERMINALS THREADED BASES L T STAKING TOOL NO. TL L L

81 CERTI FIED ISO 900 Q U A L I T Y MICRO PINS Precision engineered and manufactured Space saving design for high density packaging Micro pins are available in.07 to.080 diameters Ideal for mating with our standard line of micro jacks Available for press-fit, swage or solder mounting Sizes for.03,.06,.093 and.5 thick PC boards Custom micro pins manufactured to your specifications Other platings available upon request.07 Pin - SWAGE MOUNT.08 Pin - PRESS-FIT Material: Brass, ASTM-B6 Plating: Gold: per MIL-G-4504, Type II Tin: to per MIL-T-077, Type.08 Pin - PRESS-FIT.08 Pin - PRESS-FIT GOLD TIN PLATED PLATED L Bd Lgth. Thk Pin - PRESS-FIT Mounting Hole.05 Dia. GOLD TIN PLATED PLATED Pin - PRESS-FIT Mounting Hole.06 Dia. GOLD TIN PLATED PLATED Mounting Hole.06 Dia. GOLD TIN PLATED PLATED Phos. Bronze Mounting Hole.06 Dia. GOLD TIN PLATED PLATED A Dim Mounting Hole.0 Dia. GOLD TIN PLATED PLATED Mounting Hole.040 Dia..00 Pin - SOLDER MOUNT.05 Pin - SWAGE MOUNT.05 Pin - SWAGE MOUNT.05 Pin - SWAGE MOUNT GOLD TIN PLATED PLATED A Dim Mounting Hole.04 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.05 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.06 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.035 Dia..05 Pin - SWAGE MOUNT.05 Pin - SWAGE MOUNT.040 Pin - SWAGE MOUNT.040 Pin - SWAGE MOUNT GOLD TIN PLATED PLATED L Bd Lgth. Thk Pin - PRESS-FIT Mounting Hole.05 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.043 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.043 Dia. GOLD TIN PLATED PLATED L Bd Lgth. Thk Mounting Hole.06 Dia..040 Pin - SWAGE MOUNT.080 Pin - SWAGE MOUNT.040 Pins - INSULATED SHORTING PLUG KAY PIN Press-fit into.043 dia. hole 8 : Solid Nickel Silver 8 TUBULAR HOLLOW PIN Stake to.06 board. Mounting hole.059 dia. 9 : Brass, Tin Plate GOLD TIN PLATED PLATED A B L Bd Dim. Dim. Lgth. Thk Mounting Hole.094 Dia. RED BLACK A L Dim. Dim. 460R 460B.00 46R 46B 0 46R 46B R 463B.60 INSULATOR: Plastic, Red or Black PINS: Brass, Gold Plate

82 MICRO JACKS keyelco.com Precision engineered, closed entry contacts Space saving design for high density packaging Micro jacks are available for mating with.05 to.08 diameter pins and leads Beryllium Copper multi-spring contact maintains retention after multiple insertions Ideal for mounting transistors, resistors, diodes, IC s and similar miniature components Available for press-fit, swage or solder mounting Sizes for.03,.06,.093 and.5 thick PC boards Custom micro jacks manufactured to your specifications Other platings available upon request Body: Brass, ASTM-B6 Spring: Beryllium Copper (QQ-C-533) Plating:Gold: per MIL-G-4504, Type II Tin: to per MIL-T-077, Type For Pin - TAPER-FIT For Pin - SOLDER MOUNT For Pin SOLDER MOUNT GOLD TIN PLATED PLATED L Lgth Mounting Hole.040 Dia. For Pin - PRESS-FIT For Pin PRESS-FIT GOLD TIN PLATED PLATED L Lgth Mounting Hole.040 Dia. For Pin - SOLDER MOUNT GOLD TIN PLATED PLATED L Lgth Mounting Hole.055 Dia For Pin - SWAGE MOUNT 43 - Gold Plate Tin Plate Mounting Hole.057 Dia. For Pin - SOLDER MOUNT 46 - Gold Plate Tin Plate Mounting Hole.067 Dia. For Pin - SOLDER MOUNT 48 - Gold Plate Tin Plate Mounting Hole.0 Dia. For Pin - SOLDER MOUNT GOLD TIN PLATED PLATED L Bd Lgth. Thk For Pin - PRESS-FIT Mounting Hole.067 Dia 47 - Gold Plate Tin Plate For Pin - PRESS-FIT Mounting Hole.076 Dia Gold Plate Tin Plate Mounting Hole.089 Dia. For Pin - SOLDER MOUNT 44 - Gold Plate Tin Plate For Pin - PRESS-FIT Mounting Hole.076 Dia Gold Plate Tin Plate Mounting Hole.076 Dia. IC SOCKET CONTACTS - For Leads Gold Plate Tin Plate Mounting Hole.078 Dia. 64A - Gold Plate 64B - Tin Plate IC SOCKET CONTACTS - For Leads Mounting Hole.0 Dia. 640A - Gold Plate 640B - Tin Plate Mounting Hole.38 Dia. IC SOCKET CONTACTS - For Leads Retains.06 to.0 Dia. Leads. 4 Finger Contacts. Retains.06 to.0 Dia. Leads. 4 Finger Contacts. Retains.06 to.0 Dia. Leads. 4 Finger Contacts Gold Plate Tin Plate PRESS-FIT Mounting Hole.055 Dia Gold Plate Tin Plate PRESS-FIT Mounting Hole.055 Dia Gold Plate Tin Plate PRESS-FIT Mounting Hole.055 Dia. 83

83 CERTI FIED ISO 900 Q U A L I T Y GROMMETS, BUMPERS & BUSHINGS RUBBER GROMMETS Ideal for electrical insulation and mechanical damping. Made from BUNA S. RECESSED BUMPERS Provides excellent traction and shock absorbing qualities. available with or without Mold-in Washers. I.D. For Hole For Panel A B C D E UNIVERSAL RUBBER GROMMET Designed to adjust to different wire, cable or tubing diameters from.5 to.3 Self-adjusting membrane forms a dust resistant seal Installs in diameter hole in.06 thick panels or boards Molded outer ring retains grommet in place : Black Thermoplastic Rubber FIG. FIG. FIG. 3 : Rubber, BUNA S (figs. & ), Vinyl (fig. 3) Screw FIG. A B C D E Size # # # #8 * #6 * #8 * # # # #8 *Grey - all others black SELF-LOCKING BUMPER FOOT A unique easy-to-install self-locking bumper foot Vibration absorbing and skid resistant Two piece assembly, furnished pre-assembled Mounts without screws or tools Foot: Santoprene, Black Pin: Polypropylene, Black 77 Recommended Mounting Hole:.305 dia. NYLON INSULATED BUSHINGS Snaps into panel hole to provide protection for wire, cable and tubing from sharp uneven edges. 777 NYLON SPLIT BUSHINGS Designed to be assembled into holes that already contain wire or cable. Versatile bushing can be used on all chassis from.03 to.5 thick. HOLE A B SIZE INSIDE HEAD REQUIRED DIA. DIA : Nylon 6/6, Black : Nylon 6/6, Black HOLE MAXIMUM A B C SIZE CHASSIS INSIDE HEAD OVERALL REQUIRED THICKNESS DIA. DIA. HEIGHT

84 HOLE PLUGS/CABLE CLAMPS NYLON HOLE PLUGS Closes unused chassis holes quickly and economically. Plugs are abrasion and vibration resistant. STEEL HOLE PLUGS keyelco.com Excellent spring retention. Plugs will cover chassis holes, wiring outlets, access holes or unused opening. : Black, Nylon 6/6, Matte Finish HOLE DIA PANEL THICKNESS B C : Steel, Nickel Plate Hole Dia Panel Thickness A B C Prongs NYLON VENT PLUGS Used to cover chassis holes while allowing air flow for ventilation. NYLON CABLE CLAMPS Ideal for securing, insulating and routing cable wiring, piping, tubing, components and fibre optics. : White,.050 Nylon 6/6 : Black, Nylon 6/6, Matte Finish HOLE DIA PANEL THICKNESS.5.5 B C D.5.5 E W H FLEXIBLE GROMMETING Ideal for maintenance, short-run production, R&D or prototyping. Supplied in 5ft. rolls. Make your own grommets to fit any size or shape required. : Black, Nylon Type 6/ CAT. NO MAX. PANEL B C D E

85 CERTI FIED ISO 900 Q U A L I T Y STEEL CABLE CLAMPS : Steel Zinc Alloy METAL CABLE CLAMPS : Steel Zinc Alloy STEEL HALF CLAMPS CAT. NO D FOR DIA H HOLE DIA L CTR TO CTR W E HOLE CTR G THK CAT. NO D FOR DIA H HOLE DIA L CTR TO CTR E B C G THK W INSULATED STEEL CABLE CLAMPS : Steel Zinc Alloy CUSHION: Black Vinyl,.03 Thick INSULATED STEEL HALF CLAMPS : Steel Zinc Alloy CUSHION: Black Vinyl,.03 Thick CAT. NO D FOR DIA H HOLE DIA L CTR TO CTR W E G THK CAT. NO D FOR DIA H HOLE DIA L CTR TO CTR E B C G THK W

86 PC BOARD & CABLE ACCESSORIES keyelco.com Designed for.06 thick PC cards. Level action ejectors aids card insertion and extraction. Supplied complete with stainless steel spring pin. LEVEL ACTION PC CARD EJECTORS CARD MOUNTING DIMENSIONS : White Nylon 6/6, UL rated 94V PC BOARD GUIDES Guides may be used horizontally or vertically and snap into.5 diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation. CABLE TIES Popular sizes and strengths to meet common cable tie requirements. Injection molded with one piece construction for strength and reliability. Easily installed by hand. Optional installation tool available, tightens and flush cuts cable tie. : Natural Nylon 6/6, UL rated 94V- L A B : Natural Nylon 6/6, UL rated 94V- TENSILE BUNDLE L W T CAT. STRENGTH DIAMETER LENGTH WIDTH THICKNESS NO. (Min. Bundle) (Maximum) (Approx.) (Approx.) (Approx.) lbs lbs lbs lbs lbs Hand Operated Cable Tie Installation Tool for 8lb to 50lb Ties 87

87 CERTI FIED ISO 900 Q U A L I T Y PINS, EYELETS, RIVETS AND TOOLS WIDE ROLL EYELETS A choice of the most popular sizes in use for PC board and electronic assembly applications. : Brass PLATING: Bright Electro Tin, MIL-T-077. Recommended for longer shelf life and better solderability. Other platings can be furnished. TOLERANCE: A PLUS OR MINUS.003. B PLUS OR MINUS.008. C PLUS OR MINUS.005. A B OUTSIDE LENGTH C HOLE SIZE DIAMETER UNDER FLANGE OF TO BARREL FLANGE DIAMETER BE EYELETED All Are.5 All Are (/6 ) O.D dia. USE DRILL I.D..87 # All Are.5 All Are O.D dia. (3/3 ) I.D..87 USE DRILL 37.9 # All Are 45. O.D I.D All Are.00 dia..5 (/8 ) USE DRILL #30 Set consisting of top & bottom tool. Made from Tool Steel and highly polished. EYELET STAKING TOOL 3075 For /6 Eyelet 3076 For 3/3 Eyelet 3077 For /8 Eyelet Top Tool Bottom Tool : Brass, Nickel Plate SEMI-TUBULAR RIVETS These standardized brass rivets typify the scope and variety of popular rivets that will provide faster and stronger assemblies at lower cost. The A dimension includes the necessary clinch allowances but we suggest you rivet and test a sample before purchasing large quantities for your application. HOLE SIZE A B HEAD OF SHANK LENGTH DIAMETER TO BE DIAMETER UNDER HEAD TOL. ±.005 RIVETED DIA. 338 TO USE # DRILL DIA TO USE # DRILL TO DIA. USE # DRILL SQUARE WIRE WRAP PINS CONTACT PINS (SEAMLESS) Completely burr free straight to within.003 per inch. Conical ends of square-wire with smooth blend-in radius on corners assures ease of insertion with minimum damage to pre-plated PCB holes, which ensures trouble free insertion into printed circuit boards or when used with plug-in terminals..093 /.5 /.56 DIAMETERS Phosphor Bronze, Tin Plate Pins can be staked to.06 and.093 boards A LENGTH A LENGTH : Brass & Nickel Plate A A

88 In Drill Press with Power off Use in Vise STAKING TOOL KITS FOR MANUAL USE AND ADAPTABLE TO ANY ARBOR PRESS KICKPRESS DRILL PRESS STAKES EYELETS RIVETS TERMINALS 00 USES IN THE LABORATORY OR FACTORY PRODUCE PROFESSIONAL RESULTS UNIFORMITY ASSURED QUICK SIMPLE LOW COST BASIC STAKING KIT For Single End Terminals, Eyelets or Rivets The unskilled Operator can produce Professional looking assemblies quickly and with little effort. Stake any Diameter from /6 to /8. SINGLE END EYELETS RIVETS Easily stake the following Terminals, Eyelets and Rivets. BASIC KIT Consists of: ONE EACH TOOL HOLDER NO 79 (Will hold any /4 dia. Tools) complete with Washers and Wing Nut. TOOLS: each - 74, 75, 76, 77. Instructions included. Specify Cat. No. 7 Kit complete. MASTER STAKING KIT For Single End, Double End (Feed-Thru) and Fork Terminals Extruded Lugs, Eyelets, Rivets, Etc. A New Kit includes all Basic Tooling incorporated in the No. 7 KIT PLUS additional Tools to do most staking operations required in Laboratory and Factory. Stake Diameters from /6 to 3/6 Easily stake the following Terminals, Eyelets and Rivets. EYELETS SINGLE DOUBLE MILLED BUSHINGS RIVETS END FEED FORK THRU TYPE TOOL HOLDER NO. 79 (Will hold any /4 dia. Tools) complete with Washers and Wing Nut. TOOLS: each - 304, 305, 306, 307, 35, 36, 3, 34, 35, 36, 74, 75, 76, 77, 79, 7, 76. Instructions included. Specify Cat. No. 73 Kit complete. FOR TERMINALS - EYELETS - RIVETS ONE HAND OPERATION PRESS DOWN AND IT STAKES ADJUSTABLE FROM LIGHT TO HEAVY BLOW STAKES ALL SHANK DIAMETERS UP TO 3/3 IMPACT KIT Consists of: ONE EACH TOOL HOLDER NO. 30 Anvil tool Holder. IMPACT HANDLE No. 30 TOOLS: each - 30, 3, 3, 33, 35, 36, 3, 76, 77, 7, 76. Instructions included. Specify Cat. No. 707 Kit complete. IMPACT STAKING KIT IMPACT HANDLE STAKING TOOL THREADED TIP ANVIL keyelco.com INDIVIDUAL TOOLS AS SUPPLIED IN BASIC & MASTER KITS /4 Diameter Tools 30 ANVIL TOOLHOLDER TOP SETTING TOOLS (Swager) For Single End Terminals, Eyelets or Rivets 7 Cat. No. For Shank Dia s to to.5 For Double End (Feed-Thru) Hole in tool fits over Pin head and securely stakes the rivet part of terminal. Cat No. For Pin on Rivet end Hole Dia Hole Dia Hole Dia Hole Dia Hole Dia. BOTTOM ANVILS For Single End or Double End Terminals Anvils have different size holes in each end therefore will accept sizes of Pins of either Single or Double end Turret type Terminals. Hole one Hole other Cat. No. end end ANVIL FOR FORK TYPE TERMINALS Accepts Diameter of 3/3 to 5/3 at one end and diameter of 3/6 other end..040 slot one end and.060 slot at other end. 76 ANVIL FOR STANDOFF BUSHINGS Cat. No. 36 Holds Bushing with 5/3 O.D. 35 For Bushing with 6-3 Thread 309 For Bushing with 4-40 Thread TOOL HOLDERS For /4 Diameter Anvils For use in vise, Arbor, Kickpress, Punch Press, Drill Press etc. Consists of Holder, washers and wing nut plus instructions. CAT.NO. 79 EASILY STAKE THE FOLLOWING TERMINALS, EYELETS AND RIVETS. TOP SETTING TOOLS (Swager) Top Setting Tools For Impact Staker Cat. No. For Shank Dia s to to.093 For Double-end Terminals (Feed-Thru) Hole in tool fits over Pin head and firmly stakes the rivet part of terminal. Cat. No. Hole Dia

89 CERTI FIED ISO 900 Q U A L I T Y NYLON & FIBRE WASHERS FLAT WASHERS-NYLON & FIBRE Quotations on other size washers furnished promptly upon receipt of sample, sketch or blue print. : Fibre: Commercial Grade per ASTM D70 Nylon: Grade 6/6 per ASTM D4066 B THICKNESS SCREW C A SIZE I/D O/D Cat. No. Cat. No. Cat. No. FIBRE # NYLON # * * FIBRE # NYLON # FIBRE # NYLON # FIBRE # NYLON # FIBRE # NYLON # FIBRE / NYLON / B FIBRE 3/ NYLON 3/ *.090 I.D. FIBRE SHOULDER WASHERS : Fibre, Commercial Grade per ASTM D70 CAT. SCREW NO. SIZE L A B C D 39 # # # # # # # # # # # # # # # # # # # # ¹ ₄ ¹ ₄ ³ ₈ ³ ₈ NYLON SHOULDER WASHERS/BUSHINGS : Nylon 6/6 per ASTM D4066 CAT. SCREW NO. SIZE L A B C D 7680 # # # # # # # # # # # # # # # # # # # # # # # # # # # ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄ ¹ ₄

90 TRANSISTOR MICA INSULATORS keyelco.com RAPID HEAT DISSIPATION HIGH DIELECTRIC STRENGTH NON-TOXIC LOW COST FROM STOCK These precision stamped mica insulators provide good thermal conductivity (.009 watts per square inch per degree celsius per inch in thickness). Excellent thermal resistance 00 F. Dielectric constant of 7 at 000 Kilohertz. FOR 0-3 CASES ORDERING INFORMATION: Minimum quantity 00 pieces of an item. :.003 thick mica is used for all the insulators on this page. Tolerance for thickness is plus or minus.00. Modifications: Special thickness and other materials available on special order. Prompt quotations will be rendered. INSULATORS FOR VARIOUS TO-3 CASES.003 THICK MICA A B C D FOR TO-36 CASES.003 THICK MICA A.5 0 B C D INSULATORS FOR VARIOUS TO-66 CASES.003 THICK MICA A B C D.87 0 FOR TRANSISTOR CASES THREADED STUD.003 THICK MICA CAT. NO ID Inside Dia OD Outside Dia For Screw Size /4 5/ PLASTIC CASE MICA INSULATORS

91 CERTI FIED ISO 900 Q U A L I T Y TO-3, TO-5, TO-00 TRANSISTOR SOCKETS SOCKETS FOR TO-5 & TO-00 Fully molded compact construction. Speeds transistor assembly. Incorporates ultra high quality, closed entry, sleeve type contacts. Accepts..06 to.00 diameter leads and.00 x.08 rectangular transistor leads. : Insulator: Glass Filled Polyester, UL rated 94V-0; Contact Pin: Brass, Tin Plate; Contact Spring: Beryllium Copper, min. Gold Plate HEAVY DUTY SOCKET FOR TO-3 Features an all-in-one mouning plate and solder tabs, providing complete electrical isolation of the solder tab connections. CHOICE OF SINGLE OR DUAL COLLECTOR SOLDER TABS : Insulating Base Glass Filled Reinforced Polyester, UL Rated 94V-0 Contacts: Phosphor Bronze, Tin Plate Mtg. Bracket: Brass, Tin Plate Rated 5 Amps DC continuous and 5 Amps DC Intermittent Choice of Single or Dual Tabs FOR TO-5 (3 PIN) FOR TO-5 (4 PIN) FOR TO-5 (8 PIN) FOR TO-00 (8 PIN) FOR TO-00 (0 PIN) With transistor lead-in insulating shoulders WITH TAB 453 A ONLY 454 A & B Less transistor lead-in insulating shoulders WITH TAB 455 A ONLY 456 A & B MINI HALOGEN LAMP SOCKETS Accepts diameter Pins or Leads The wire wrap Pins are annealed dead sort and can be easily bent to achieve a variety of positions. FULLY MOLDED TO-3 SOCKET Pre-assembling the socket to the chassis by eyelets or rivets permits the installation of the semi conductor at a later stage in the assembly. The molded top boss eliminates hardware. : Molded Nylon 6/ Base: Glass Filled LCP Contact: Beryllium Copper - Gold Plated Shell: Brass, Nickel Plate with.05 SQ. Wire Wrap

92 TO-3 POWER TRANSISTOR SOCKETS keyelco.com SOCKETS FOR TO-3 CASE VARIOUS MOLDED BOSS HEIGHTS The socket is held underneath the chassis and the semiconductor is inserted into the contacts of the socket holding the assembly in position. To complete the mounting, use 6-0 screws to engage the formed holes in the collector plate A DIM : Top Plate: Molded Nylon Base: Phenolic SOCKETS FOR TO-3 CASE VARIOUS MOLDED BOSS HEIGHTS Pre-assembling the socket to the chassis by eyelets or rivets permits the installation of the semiconductor at a later stage in the assembly A DIM : Top Plate: Molded Nylon Base: Phenolic FOR TO-3 CASE (ALL PHENOLIC SOCKET) This socket is eyeletted or riveted to the chassis and use external bushings to insulate the screws in the final mounting. The semiconductor may be installed at the last stage of the assembly. : Top Plate: Phenolic Base: Phenolic 4606 SOCKET FOR TO-3 (PRINTED CIRCUIT) Easily assembles onto printed circuit board. Eliminates wiring. Stops on P.C. terminals provide sufficient spacing between socket and P.C. board to permit proper assembly of transistor to socket. Can be screwed down tightly to heat sink. : Top Plate: Molded Nylon Base: Phenolic

93 CERTI FIED ISO 900 Q U A L I T Y TRANSISTOR SOCKETS KITS LABOR SAVING EASY MOUNTING TO CHASSIS BETTER THERMAL EFFICIENCY An improved, simpler, less costly method of semiconductor mounting. Avoid soldering directly to the semiconductor. Easier to service, economical, more efficient. ORDERING INFORMATION: Complete Kits or Individual Hardware Purchase the complete kit by catalog number as shown or individual items in minimum 00 piece packages. Keystone does not supply semiconductors. Socket Base: Phenolic, XP grade Contacts: Brass, Tin Plate Top Plate: Nylon per ASTM-D4066 Collector Plate:.030 Steel, Tin Plate Screws Steel, Type B, 4-40 or 6-0 as required Mica.003 Thick SOCKET MOUNTING FOR TO-3 CASE The socket and transistor are assembled without previous attachment to the chassis. Contacts are spaced.430 apart. The.045 high boss on the nylon top eliminates the need of washers or bushings. ITEM A B C DESCRIPTION 6-0 screws Mica Insulator Socket QUANTITY SOCKET ONLY 473 Complete Mounting Kit (includes all of the above) 460 SOCKET MOUNTING FOR TO-3 CASE These sockets are pre-assembled to the chassis by either eyelets or rivets. Spacing of contacts is.430 centers. The.045 high boss on the nylon top eliminates the need of washers or bushings. ITEM A B C DESCRIPTION 6-0 screws Mica Insulator Square Socket QUANTITY SOCKET ONLY 4733 Complete Mounting Kit (includes all of the above) SOCKET MOUNTING FOR TO-3 CASE An all phenolic socket that is pre-assembled to the chassis by eyelets or rivets. Spacing and brass contacts.430 centers. ITEM A B C D DESCRIPTION 6-0 screws Mica Insulator Nylon Bushings Sq. Phenol. Socket QUANTITY SOCKET ONLY 4734 Complete Mounting Kit (includes all of the above) 4606 FOR TO-3 CASES NYLON POWER TRANSIST OR MOUNT Barrier insulator, molded of type 6/6 natural colored nylon, functionally replaces up to six pieces of conventional insulation required with previous methods of mounting power transistors. Built-in barrier eliminates need for sleeving of connections. FOR TO-66 CASES 94 REV #: DATE: NOTE: Heavy Duty Insulator made of celanex available. Samples and quote upon request.

94 TRANSISTOR MOUNTING KITS COMPLETE KITS OR INDIVIDUAL HARDWARE PRE PACKAGED UNIFORM HARDWARE AT LOW COST These pre-packaged universal mounting kits provide all the necessary hardware and insulators required to securely mount the semiconductor to the chassis. Purchase the complete kit consisting of all hardware included in one package. Your choice of individual items available in 00 piece packages. We welcome suggestions for improving these kits and will render prompt quotations for specially packaged hardware. Keystone does not supply any semiconductors. m ORDERING INFORMATION: Individual parts are sold in not less than 00 pieces of an item. Complete kits are ordered by specifying the complete mounting kit catalog number. FOR TO-3 CASE FIG. FOR TO-66 CASE FIG. Item A B C D E F G Cat. No Description 6-3 Screws Mica Insulator Shoulder Washers Metal Washers Solder Terminal Lockwashers 6-3 Nuts Quan Item A B C D E F G Cat. No Description 6-3 Screws Mica Insulator Shoulder Washers Metal Washers Solder Terminal Lockwashers 6-3 Nuts Quan 475 Complete Mounting Kit Item A B C D E FOR TO-36 CASE FIG. Cat. No Description Mica Insulator Shoulder Washer Metal Washers Solder Terminal 0-3 Nuts Quan 476Complete Mounting Kit FOR PLASTIC CASE FIG. 4 Item Cat. No. A 4683 B 4663 C 343 D 469 E 4693 F 4695 G 4694 Description 4-40 Screws Mica Insulator Shoulder Washers Metal Washers Lockwashers Solder Terminal 4-40 Nut Quan 477 Complete Mounting Kit FOR DO-4, TO -59, TO-60, TO-6 CASE FIG. 3 FOR DO-5, TO-48, TO-6 CASE FIG. 3 FOR TO-0 CASE FIG Complete Mounting Kit FOR TO-63 CASE FIG. 3 Item A B C D E Cat. No Description Mica Insulator Shoulder Washer Solder Terminal Lockwasher 0-3 Nuts Quan Item A B C D E Cat. No Description Mica Insulator Shoulder Washer Solder Terminal Lockwasher /4-8 Nuts Quan Item A B C E G Cat. No Description Quan 4-40 Screws Mica Insulator Shoulder Washer Lockwasher 4-40 Nuts Item A B D E Cat. No Description Mica Insulator Shoulder Washer Lockwasher 5/6-4 Nuts Quan 479 Complete Mounting Kit 4730 Complete Mounting Kit 474 Complete Mounting Kit 473 Complete Mounting Kit POWER TRANSISTOR COVERS Molded nylon covers easily mount over and insulate the power transistor. Available with or without brass eyelets installed in mounting holes to Will withstand temperatures to approx. 300 F. assure proper electrical contact with collector/case. FOR TO-3 CASES FOR TO-66 CASES FOR TO-3 TO-3 TO-66 TO-66 EYELETS INSTALLED NONE TWO NONE TWO I.D. "A"

95 CERTI FIED ISO 900 Q U A L I T Y For.06 &.093 Dia. Holes Terminals are pressed into the holes of the board manually; or a low cost insertion tool can be supplied for use at the bench, or in an arbor or drill press. QUICK & EASY TO INSTALL NO STAKING REQUIRED FOR PRODUCTION OR EXPERIMENTAL USE "FLEA" CLIP.06 Dia. Holes For subminiature applications where conventional terminals are too large or too costly. The design engineer will find them most useful; and the serviceman will need these for quick repairs of printed circuitry. Simply insert wire thru hole and it is held firmly by spring wipe action assuring continued positive contact. :.008 thick Beryllium Copper FINISH: Bright Tin PUSH-IN TERMINALS MINIATURE TUBULAR TERMINALS Dia. Holes IDEAL FOR PRINTED CIRCUITRY TAPERED SECTION RETAINS WIRE LEADS MOUNT TRANSISTORS, RESISTORS, NEONS POSITIVE LOCKING IN HOLE - NO STAKING REQUIRED These terminals are often used for transistor and Bi-Pin lamp sockets. Terminals snap into a diam. Hole of a /6" thick insulator and are firmly held without the need of staking. Wire leads can be inserted from either end and retained. Terminals 36 and 37 have tapered socket spring forming that will hold a number of leads in position and allow multiple dip soldering. Terminals are pre-tinned for easy soldering. :.006 Thick Brass Precision Formed and Pre-Tinned HOLDS.00 TO.050 DIAMETER WIRE 500 (BRIGHT ELECTRO TIN) Insertion Tool Cat. No. 3 IMP TERMINAL.06 Dia. Holes The name implies the miniature characteristics of this terminal.it is only slightly larger than the FLEA clip. Excellent for point to point or feed thru wiring.slot is serrated to grip component leads. Multiple connections are made quick and easy. :.OO8 thick Beryllium Cooper FINISH: Tin Plate FT SOLDERLESS TERMINAL Insertion Tool Cat. No Dia. Holes Terminal for production or breadboarding use. Holds as many as 7 without soldering. A rugged, spring action precision stamped terminal. :.05 Spring Steel FINISH: Tin Plate 38 INSERTION TOOL FOR ABOVE For Arbor Press or similar reciprocation device. Specify TL- For Hand Insertion Tool. Specify 4 "MICRO" TERMINAL Easily press-fit into a.04 dia. Hole without staking or the base may be flared for permanent installation. Ideally designed for use in circuitry to support components when space is at a premium. :.008 Beryllium Copper, Tin Plate 498-CP 495 Insertion Tool Cat. No. 33 Insertion Tool Cat. No. 3 96

96 TERMINAL STRIPS & BOARDS Tin plated lugs and brackets. Bakelite XP.06 thick. In addition to the strips shown, we manufacture many other varieties in any configuration and materials required. Send samples or sketch for prompt quotation. FIG. 9 TERMINAL STRIPS (Standard & Miniature) FIG. FIG. FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 0 FIG. FIG. FIG. 3 FIG. 4 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 0 FIG. 5 FIG. FIG. FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 FIG. 30 FIG. 35 FIG. 3 FIG. 3 FIG. 33 FIG. 34 FIG. 36 FIG. 37 STANDARD STANDARD keyelco.com MINIATURE FIG. NO MINIATURE MIRCO-MINIATURE BREADBOARDS WITH.04 DIA. HOLES FOR MODULE STACKS SMALLER PLUG-IN CARDS POSSIBLE PERMITS HIGHER COMPONENT DENSITY "P" PATTERN.04 HOLES.00x.00 WIDTH & LENGTH.00 x x x x x x x x 7.00 NO. HOLES W & L GLASS EPOXY.03 THICH (/3") 9 x x x x THICK (3/64") 9 x 44 9 x x x XP NATURAL PHENOLIC WIDTH & LENGTH.00 x x x x x x x x x 7.00 NO. HOLES W & L GLASS EPOXY.06 THICK (/6") 9 x x x x x x x x x XP NATURAL PHENOLIC CUSTOM BUILT TERMINAL BOARDS We are specialists in the custom fabrication (stamping/machining) of all phenolic, fiberglass and fibreboard materials. We also assemble terminals, eyelets, and special hardware to boards. Quotations on special terminal boards furnished promptly upon receipt of sample, sketch or print. Also available, assembly services using customer supplied materials. 97

97 CERTI FIED ISO 900 Q U A L I T Y STANDARD TURRET TERMINAL BOARDS SCORED TURRET TERMINAL BOARDS Cut your production cost by elimination the tooling and setup charge usually applied to nonstandardized boards. Terminals are securely riveted and hot tinned for easy soldering. Terminals: Brass, ASTM-B6 Plating: Hot Tin Dipped, MIL-T-077. Recommended for longer shelf life and better solderability. Other platings can be furnished. : Choice of either PBE or GEE. PBE: Paper base electrical, MII-P-35C, Type XP natural, Temp. 50 F max. GEE: Glass epoxy, MIL-I-4768/7, Type G-0, 300 F max. Modifications: Boards can be modified with other materials or terminals of your choice. Can be supplied with terminals staked in all holes or without terminals staked. Marking can be added. Prices on request. ALL TERMINAL DRAWINGS ARE ACTUAL SIZE. CHOICE OF TERMINALS 3/8" SPACING AND SCORED 3/3" THICK PHENOLIC - Choice of 4 Types of Terminals Overall Length of Board 3 /8", five 5 /8" Sections Five sections SCORED for easy separation. M'tg. Holes in each section. W / / / / 3 S Single Row 3 /6 / / NO. OF TERMS PBE GEE PBE GEE PBE GEE PBE GEE PBE GEE PBE GEE WITH 503 TERM WITH 509 TERM WITH 507 TERM WITH 545 TERM MINIATURE TURRET TERMINAL BOARDS /4" SPACING AND SCORED - /6" THICK PHENOLIC Overall Length of Board is 9 /6", Five 5/6" Sections Choice of 6 Types of Terminals Five sections SCORED for easy separation. M'tg. Holes in each section. MINIATURE TURRET TERMINAL BOARDS 7/3" SPACING AND SCORED - /6" THICK PHENOLIC Overall Length of Board 7 3/6", Five 9/6" Sections Choice of 5 Types of Terminals Five sections SCORED for easy separation. M'tg. Holes in each section. ALL TERMINAL DRAWINGS ARE ACTUAL SICE. CHOICE OF TERMINALS W 5 /6 7 /8 /8 S Single Row 9 /6 3 /6 NO. OF TERMS PBE GEE PBE GEE PBE GEE ALL TERMINAL DRAWINGS ARE ACTUAL SICE. CHOICE OF TERMINALS W 5/6 3/4 S Single Row / 3/4 NO. OF TERMS PBE GEE PBE GEE PBE GEE WITH 57 TERM WITH 573 TERM WITH 50 TERM WITH 574 TERM WITH 56 TERM WITH 575 TERM WITH 56 TERM WITH 583 TERM WITH 5 TERM WITH 559 TERM WITH 533 TERM

98 TURRET TERMINAL BOARDS SAVE TOOLING ECONOMICAL COMPLETE RANGE OF SIZES Readi-Made Terminal Boards: Low cost, meets commercial and military specifications. Produced in large quantities, making it possible to eliminate tooling and setup charges usually applied to non-standard boards. Terminals: Brass, ASTM-B6. Terminals are staked in all holes except end mounting holes. Plating: Hot Tin Dipped, MIL-T-077. Recommended for longer shelf life and better solderability. Other plating can be furnished. : Choice of either PBE or GEE PBE: Paper base electrical, FED. LP-53, Type XP natural, Temp. 50 F max. GEE: Glass epoxy, MIL-I-4768/7, Type G-0, Temp. 300 F max. Modifications: Boards can be modified with other materials or terminals of your choice. Can be supplied with terminals staked in all holes or without terminals staked. Marking can be added. Prices on request. TURRET TERMINAL BOARDS 3/8" SPACING choice of sizes Terminal: Brass Hot Tin Dipped. Height above board 3/64" : Choice of PBE or GEE 3/3" thick. Terminals are staked in all holes except end mounting holes. SEE BRACKET PAGE FOR SUITABLE MOUNTING HARDWARE. W / 3/6 / / 3 S Single Row 3/4 / / L 5/8 5 /4 7 7/8 0 / 3 /8 5/8 5 /4 7 7/8 0 / 3 /8 5/8 5 /4 7 7/8 0 / 3 /8 5/8 5 /4 7 7/8 0 / 3 /8 5/8 5 /4 7 7/8 0 / 3 /8 5/8 5 /4 7 7/8 0 / 3 /8 NO. OF TERMS EACH SIDE PBE keyelco.com BOARDS ON THIS PAGE ARE NOT SCORED GEE MINIATURE TURRET TERMINAL BOARDS /4" SPACING choice of sizes Terminal: 573- Brass, Hot Tin Dipped. Height above board 3/6" : Choice of PBE or GEE /6" thick. W 5/6 7/8 /8 S Single Row 9/6 3/6 L 5/6 3 /6 5 7/6 7 3/6 8 5/6 5/6 3 /6 5 7/6 7 3/6 8 5/6 5/6 3 /6 5 7/6 7 3/6 8 5/6 NO. OF TERMS EACH SIDE PBE GEE

99 CERTI FIED ISO 900 Q U A L I T Y MINIATURE TURRET TERMINAL BOARDS Terminals: Brass, ASTM-B6. Terminals are staked in all holes except end mounting holes. TURRET TERMINAL BOARDS Plating: Hot Tin Dipped, MIL-T-077. Recommended for longer shelf life and better solderability. Other plating can be furnished. 7/3" SPACING : Your choice of eight PBE or GEE phenolic, /6" thick. PBE: Paper base electrical, FED. LP-53. Type XP natural, Temp. 50 F max. GEE: Glass epoxy, MIL-I-4768/7, Type G-0, Temp. 300 F max. The 56 terminal is often specified for support and connection of transistors, resistors and small component parts. Ther is a.043 dia. Hole thru the terminal and it stands 5/3" above the board. MODIFICATIONS: Boards can be modified with other materials or terminals of your choice. Can be supplied with terminals staked in all holes or without terminals staked. Marking can be added. Prices on request. Terminals are staked in all except end mounting holes. W 5/6 3/4 S Single Row / 3/4 L 9/6 3 3/3 4 5/8 6 5/3 7 /6 9/6 3 3/3 4 5/8 6 5/3 7 /6 9/6 3 3/3 4 5/8 6 5/3 7 /6 NO. OF TERMS. EACH SIDE PBE GEE TURRET TERMINAL BOARDS : 3/3" Thick PBE, Nat. 3/8" SPACING ALL TERMINAL DRAWINGS ARE OF ACTUAL SIZE. CHOICE OF TERMINALS Terminals are staked in all holes except end mounting holes. L /8 / 7/8 /4 5/ /8 3 3/4 4 /8 4 / A 3/4 /8 / 7/8 /4 5/ /8 3 3/4 4 /8 NO. OF TERMS WITH 503 TERM WITH 509 TERM WITH 545 TERM MODIFICATIONS: WE CAN MAKE THESE BOARDS IN LONGER LENGTHS WITH OTHER S AND USING ANY OTHER STANDARD TERMINALS WITH 507 TERM : Fiberglass-NEMA GRADE GPO-3. A glass polyester rated for continuous operation at 55 C or 300 F. /6" thick. Backing Strips: /3" thick fibre with mounting holes drilled only. Terminals: Brass, Thick, Bright Electro Tin MIL-F Thick, Bright Brass Other platings available on special order. QUICK-FIT TERMINAL STRIPS W WIDTH /.05 TAB 0 TAB L LENGTH / / /4 4 / A MTG. C'TRS /8 7/8 5/8 3 3/8 4 /8 NO. TERM. EACH SIDE TAB 0 TAB WITH 54 TERMINAL BACKING INSULATOR /3 THICK FIBRE BACKING STRIP WITH 57 TERMINAL

100 TERMINAL STRIPS STANDARD BINDING POST STRIPS keyelco.com FOR ALL BINDING POST STRIPS FIBERGLASS: Reinforced Polyester NEMA GEE: Glass Epoxy, MIL-I-4768\7 PBE: Paper base electrical, FED. LP-53 Grade GPO-3 rated for 300 F. (55 C). Type G-0, Temp. 300 F max. (55 C) Type XP natural, Temp. 50 F max. ( C) Terminals supplied on these strips Terminal:.03 Steel, Tin Plated. Screw: Brass - Nickel Plated. 48 HEAVY DUTY BINDING POST STRIPS Terminals supplied on these strips MILITARY TERMINAL BOARDS Terminal:.064 Brass-Tin Plated. Screw: Brass - Tin Plated. 09 0

101 CERTI FIED ISO 900 Q U A L I T Y HOUSINGS & HEADERS PLUG-IN HOUSINGS Enhance the appearance and give a professional look to your products using these molded housings. Ideally suited for packaging relays, logic packages, networks and miniature circuitry. Durable, lightweight covers withstand vibrations and rough usage. HEADERS: Molded of G.P. black phenolic. Fits standard sockets. PINS: Brass, Nickel Plated. CHARACTERISTICS: Variety of molded materials Good chemical resistance. POLYSTYRENE: For general purpose use where high impact strength is not required and temperature would not exceed 70º F. LEXAN: 3 Times the impact strength of Polystyrene. Excellent electrical properties. Use wherever temperatures of 80º F exist Housing with Octal Header & 4 Screws Housing Only Fig. No. Type Mini Mini Mini Mini Material Lexan Lexan Polystyrene Polystyrene Color Clear White Clear Opaque Black MINI SMALL Small Small Small Small Lexan Lexan Polystyrene Polystyrene Clear White Clear Opaque Black FIG. FIG Large Large Large Lexan Polystyrene Polystyrene Clear Clear Opaque Black Xtra-L'ge Xtra-L'ge Xtra-L'ge Polystyrene Polystyrene Lexan Clear Opaque Black Clear LARGE EXTRA LARGE HEADERS: Headers are available in a variety of pin configurations that fir standard sockets. Molded of general purpose phenolic with brass nickel plated pins sturdily staked. HEADERS FOR THE ABOVE HOUSINGS FIG. 3 FIG. 4 FIG. FIG. FIG. 3 3/8 Sq. Headers for Mini & Small Housing (Fig. Above) Pin Configuration Octal Nine Pin Eleven Pin 5/6 Sq. Headers for Large Housing (Fig. Above) 685 Not Available 686 3/4 x 3/8 Headers for Extra Large Housing (Fig. 3 Above) 690 Not Available 74 SELF TAPPING SCREW 689-For covers #4x3/8 Lg. 0

102 ENGINEERING DATA keyelco.com DRILL SIZE DIAMETER TABLE Drill Diameter Size / / / / / Drill Diameter Size / / / / / / / Drill Diameter Size.03 3/ / A.344 5/ B.40 C.460 D 00 /4 00 E 70 F.60 G.656 7/ H.70 I.770 J.80 K.8 9/3.900 L.950 M.969 9/ N.35 5/6.360 O.330 P.38 / Q.3390 R.3438 / S.3580 T / U 0 3/ V.3860 W / X Drill Diameter Size.4040 Y.406 3/3.430 Z.49 7/ / / / /64 0 / / / / / / / /64 0 5/ / / / / / / / / / / / / / / / / / / / / / / / / SCREW/STUD CLEARANCE HOLE TABLE Recommended Screw/Stud Screw/Stud Clearance Size Dia. Max. Hole Dia /4 0 7 MILLIMETER CONVERSION TABLE Decimal Fraction MM Inches Inches / / / / / / / / / / / / / / / / Decimal Fraction MM Inches Inches / / / / / / / / / / / / / / / / Decimal Fraction MM Inches Inches / / / / / / / / / / / / / / / / Decimal Fraction MM Inches Inches / / / / / / / / / / / / / / /

103 CERTI FIED ISO 900 Q U A L I T Y NUMERICAL INDEX CAT. NO PAGE NO. thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO. NO thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO. NO thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO. NO. thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO. NO thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru

104 CAT. PAGE NO NO thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru NUMERICAL INDEX CAT. PAGE NO NO. 49 thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO NO thru thru thru thru thru thru thru C thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru CAT. PAGE NO NO thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru keyelco.com CAT. PAGE NO. 854-TL NO. 854 thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru MS749B thru 5B5.. 0 MS749E thru 5E5.. 0 SPR SPR SPR STH STH STH STR STR TL TL-9 thru TL FOR CATALOG NUMBERS NOT LISTED: Refer to the New Products Section in front of this Catalog or contact Customer Service 05

105 NEW PRODUCTS A keyelco.com AA N SIZE PC BUTTON & LEAF-SPRING CONTACTS Ideal for AA and N size batteries Space saving design installs directly onto the PC board Suitable for.06 and.093 thick PC boards Reliable leaf-spring assures low contact resistance Ideal for self-contained battery compartments 596 POSITIVE NEGATIVE :.0 Thick, Spring Steel, Tin Plate 590 DENSI-PAK BATTERY HOLDERS For AAA 484 For (3) AAA For AA Supports high density packaging on or off board, positions anywhere for easy access to battery Economical design Batteries securely held in place to assure a positive connection and maintain a low contact resistance Contact springs self-adjust to variations in battery length Snap-on cover fully protects battery Recessed or fully enclosed contacts Withstands shock and vibration Holder: A.B.S. Springs: Spring Steel, Nickel Plate Wires (Red & Black): 6 inches long, #6AWG, Tinned,.87 end strip UL/CSA007 For AA 490 For () AA 487 For (3) AA 9 VOLT PC LEAF-SPRING CONTACT NEW for 6.8mm dia. button cell Refer to Catalog M (Page 8) for New Coin Cell Battery Retainers & Holders Ideal Slide-In contact for easy installation Suitable for.06 and.093 thick and removal of 9 Volt batteries PC boards Space saving design installs directly onto Reliable leaf-spring assures low the PC board contact resistance Ideal for self-contained battery compartments 9 Volt For Two Contacts 590 :.0 Thick, Spring Steel, Tin Plate NPA

106 NEW PRODUCTS B THRU-HOLE & SURFACE MOUNT AUTOMOTIVE BLADE FUSE CLIPS Available for maxi, standard and mini blade fuses Thru hole PC mountable, maintains position during wave soldering Space saving, low profile designs NEW CERTI FIED ISO 900 Q U A L I T Y FOR.0.03 MINI BLADE FUSES Horizontal and vertical mini blade clips for Littelfuse ATO 97 series and Bussmann ATM series Withstands the rigors of shock and vibration Horizontal and vertical standard blade clips for Littelfuse ATO 57 series and Bussmann ATC series Holds fuse securely, even after multiple insertions FOR.0.03 MINI BLADE FUSES Vertical maxi blade clips for Littelfuse MAXI series and Bussmann MAX series. Current Rating: 30 Amps or as noted.06 Brass, Tin Plate Low Profile Vertical-Surface Mount TR (On Tape & Reel) Pad Layout For Two Clips.0 Brass, Nickel Plate Vertical For Two Clips.0 Brass, Nickel Plate Horizontal FOR STANDARD BLADE FUSES For Two Clips.06 Brass, Tin Plate Low Profile Vertical-Thru Hole Mount 3564 For Two Clips.06 Brass, Nickel Plate Current Rating: 40 Amps 35 - Vertical For Two Clips.0 Brass, Nickel Plate Current Rating: 40 Amps Horizontal For Two Clips NEW FOR.3.03 MAXI BLADE FUSES MALE/FEMALE STANDOFFS PC SCREW TERMINAL FOR PC/04 & PC/04-PLUS MODULES EXTENDED.00 Copper, Nickel Plate Brass Nylon Rated: 5 Amps Terminal:.03 Thick Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate Current Rating: 80 Amps Vertical 3555 For Two Clips A Brass, Nickel Plate Nylon 6/ (Screw Supplied Unassembled) 7699 (Screw Captivated) 7789 (Supplied Less Screw) METRIC SNAP-IN PC SCREW TERMINALS Rated: 5 Amps Terminal: 0.8 Thick Brass, Tin Plate Binding Head Screw: Brass, Nickel Plate 7689 (Screw Supplied Unassembled) 7695 (Screw Installed & Captivated) 7790 (Supplied Less Screw) NPB HORIZONTAL VERTICAL NOTE: All dimensions are in millimeters 7698 (Screw Supplied Unassembled) 7696 (Screw Installed & Captivated) 7788 (Supplied Less Screw)

107