MDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features

Size: px
Start display at page:

Download "MDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features"

Transcription

1 MDM Applications Features MIL-DTL STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic boxes, ITT Cannon s Microminiature D Connectors are now being designed into places where standard D-Subminiature had typically been used. ITT Cannon s Micro-D Metal (MDM) connectors are being made with strong, lightweight aluminum shell and either a high quality Liquid Crystal Polymer. The unique twist pin design that takes seven light gauge beryllium copper wires over three soft drawn copper wires welded together to form a small flexible bird cage. The twist pins are recessed in the insulator to protect the contacts from damage and appear to be slightly off center. When mating to the socket contact this POSALINE design will self center, elongate and twist inside the socket contact, providing excellent wiping action and maintaining maximum continuity even under the severest shock and vibration. MDM s come in eight different shell sizes, from 9 to 100 contacts, with each contact being sealed against moisture when mated by a silicone interfacial seal. Medical Equipment Satellites Robotics Bar Code Scanners Hand Held Test Equipment High Strength Light Weight Aluminum Shells These connectors use aircraft/space grade aluminum shells that are capable of withstanding the rigors of space including the ballistic launching into space and the environmental extremes of space. Extremely Small Interconnect Micro-D connectors are designed with contacts on.050" (1.27) centers and size 24 contacts, providing ultra-high density connector in half the space typically needed for standard D-Subminiature connectors. These connectors are typically used where small space and lightweight are of primary concern. Unique Twist Pin and Solid Tube Socket Micro-D s use ITT Industries twist pin that is constructed by welding seven wires together to form a strong rounded tip. Then slightly twisting the wires to form a birdcage before crimping them into the body of the pin contact. Micro-D s differ from standard D-Subminiature connectors in that the pin contacts are protectively house in the insulator and the solid tube socket contacts are visibly extended from the socket insulator. This unique design protects the twist pin from damage. Missiles Geophysical Equipment Commercial Avionics Navigation Systems The pin contact bird cage gets compressed, elongates and twists inside the smaller diameter of the solid tube socket providing excellent wiping action and extremely low contact bounce even under high vibration. Total Environmental Sealing Silicone Interfacial Seals and Epoxy Potted Contacts The silicone interfacial seal prevents the entrance of environmental contaminants, humidity and moisture from entering the contact area when mated. The wire side of the connectors are potted with high quality epoxy that encapsulates the wire side of the connector and locks the contacts into the insulator preventing any contact pullout. Pre-wired Connectors for Fast Easy Assembly Micro-D Miniature connectors are available in three basic styles, solder, printed circuit and the popular pre-wired connector version. This version comes in a wide variety of lengths from short.500 (12.70) solid 25#AWG wires up to 72 (3048.0) Teflon insulated stranded 26 AWG wires that can be trimmed down to suit your application and prevents the tedious process of having to solder many fine wires onto the tightly spaced terminals. 213

2 Technical Specifications MATERIALS & FINISHES Shell Aluminum alloy per QQ-A-200/8 (6061-T6) Plating Yellow chromate over cadmium per QQ-P-416, Type II, Class 3 over electroless nickel underplate or for Zero cadmium and space application electroless nickel per MIL-C-26074, Class 3 of 4, Grade B Contacts Pins - outer strands BeCu alloy per QQ-C-530 Inner strands - copper alloy per QQ-W-343, Type S Sleeve - copper alloy per ASTM B75 Sockets - copper alloy per ASTM B140 Plating Minimum 50 microinches gold per MIL-G-45204, Type II, Grade C, Class 1, over copper flash Insulator Liquid Crystal Polymer (LCP) A130 or C130 color black per MIL-M-24519, Type GLCP-30 Interfacial Seals Flourosilicone elastomer per MIL-R grade or ZZ-R-765, class 3A, grade 40 (pink) Epoxy Wire Seals Pre-wired harnesses - Hysol EE4215/HD3561 (black) Printed circuit - Hysol MG8F-0134 (black) Wire 25 AWG Solid copper per QQ-W-343, Type S, Plated Tin 100 microinches or gold 10 microinches MDM - 26 AWG Teflon wire 7/34 per MIL-W-16878/4, Type E Yellow or Color Coded per MIL-STD-681 System 1 M AWG Teflon wire 19/38 per MIL-W White or Colored Coded per MIL-STD-681 System 1 except wire number equals contact cavity number minus 1, and 10 colors repeating ELECTRICAL DATA Test Voltage Current Rating Contact Resistance Insulation Resistance 600 Vac at sea level 150 Vac at 70,000 feet (23410 meters) 2.5 Amps (test) 8 milliohms maximum at 3 amps 10 milliohms maximum at 1 milliamps: MIL-STD-202 Method megohms minimum at 500 Vdc 1000 megohms minimum after condition; MIL-STD-1344 Method 1002 Magnetic Permeability 2.0µ (connectors less hardware) Thermal Vacuum per NASA SP-R-0022 (space class only) Outgassing Total Mass Loss (TML) 1.0 percent maximum Volatile Condensable Material (VCM) 0.1 percent maximum MECHANICAL Operating -55 C to +125 C (-67 F to 257 F) Temperature Sealing Humidity Mating Life 500 cycles minimum Salt Spray 48 hours MIL-STD-1344 Method 1001 Condition B Chemical Resistance Cleaning solvents: Perchloroethylene US practical grade, 2 hours Lubricating oil aircraft turbine engine, synthetic base 20 hours Coolant (coolanol 25 or equivalent) 1 hour +/- 1 minute Vibration 20g s MIL-STD-1344 Method 2005 Condition IV Shock 50g s MIL-STD-1344 Method 2004 Condition C Contact Type Pre-wired, solder, printed circuit board (gold plated) Number of Circuits 9 to 100 Contact Retention 5 pounds minimum Polarization D shaped shells Approvals MIL-DTL

3 Connector Saver Accessories Save wear and tear on your equipment and system connectors by using the Connector Saver. The multi-matings and unmatings experienced by most connectors during testing and final check out can be eliminated. Simply mate the Connector Saver to your unit and use the opposite side for your testing interface... less wear, less tear, less chance of damage. It is available in all eight standard MDM layouts. Mating hardware is available and can be ordered either separately or included with the "Connector Saver." Typical MDM style connections have a minimum mating cycle life of 500 matings. By using up to 500 "Connector Savers," equipment mating life can be extended 500 times. 500 mates x 500 "Connector Savers" = 250,000 matings before you would need to replace/repair the original connector on the piece of equipment. MDM Size 9 Shown A174 Electroless Nickel A B C Size With Hardware W/O Hardware *Hardware Kits Max. +/-.005 (0.13) Max. 9 MDM MDM (19.94).565 (14.35).308 (7.82) 15 MDM MDM (23.75).715 (18.16).308 (7.82) 21 MDM MDM (27.56).865 (21.97).308 (7.82) 25 MDM MDM ** (30.10).965 (24.51).308 (7.82) 31 MDM MDM (33.91) (28.32).308 (7.82) 37 MDM MDM (37.72) (32.13).308 (7.82) 51 MDM MDM (36.45) (30.86).351 (8.91) 100 MDM MDM *** (55.12) (45.72).394 (10.01) * Kit contains 2 bushings-jackpost/jackscrew and 2 E-rings. ** Size #2-56 UNC-2B Thread *** Size #4-40 UNC-2B Thread Dimensions are shown in Inches (mm) unless otherwise indicated. 215

4 How to Order STEP 1 Choose Insert Material Type STEP 2 Choose Layout View - Mating face of pin insert STEP 3 Choose Contact Type MDM Liquid Crystal Polymer* P = Pin (In plug) For ordering Military M83513 See Pages 226 & S = Socket (In receptacle) 100 STEP 7 Create Part # by using these 6 steps MDM 15 P S A174 1 Material Type 2 Layout 3 Contact 4 Terminations 5 Hardware 6 Mod Code 216 *Note: Previous Material was Diallyl Phthalate or Polyester.

5 How to Order STEP 4 Choose Terminations PCB Terminations BS = Straight Printed Circuit Board BR = Right Angle Printed Circuit Board CBR = Narrow Profile Right Angle Printed Circuit Board Solder Terminations S = Solder cup 26 AWG wire Max. Wire Terminations *** Solid Uninsulated 25 AWG gold plated wire Length Code Inches (mm) L (3.18) L (3.81) L (4.83) L (6.35) L (9.52) L1.500 (12.70) L (19.05) L (25.40) L (38.11) L (50.80) L (63.50) L (76.20) Stranded Wire Terminations *** Yellow Color Coded Length in Inches (mm) minimum H020 H027 3 (76.2) H019 H016 6 (152.4) H026 H034 8 (203.2) H029 H (254.0) H028 H (304.8) H001 H (457.2) H038 H (508.0) H009 H (609.6) H010 H (762.0) H011 H (914.4) H013 H (1219.2) H017 H (1828.8) H042 H (3048.0) *** Note for wire lengths other than listed, please call Dimensions are shown in Inches (mm) unless otherwise indicated. PCB Hardware Omit for none T = Threaded; Sizes 9-51 = 2-56 thread Size 100 = 4-40 thread A = Large Through Hole; Sizes 9-51 =.125 (3.18) diameter Size 100 =.120 (3.05) diameter B = Standard Through Hole; 9-51 contacts =.091 (2.31) 100 contacts =.120 (3.05) B1 = Through Hole for size 100;.1475 (3.75) per MIL-C F = Float Mount K = Jackscrew STEP 6 Choose Mod Code Omit for Standard - Yellow chromate over cadmium A174 = Electroless nickel A172 = Gold over nickel A141 = Irridate/alodine A30 STEP 5 Choose Hardware P = Jackpost = Black anodized L = Low Profile Jackscrew M = Military: See page 223 F222 = Special high temperature version -55 C TO +200 C (-67 F TO +392 F) Need a special length? Maybe a custom harness? Let us create the perfect solution for you. Call

6 Dimensions Shell Dimensions (Conforms to MIL-DTL-83513) Plugs Receptacle Solder Pot Receptacle (MDM-100 only) Solder Pot Pigtail Termination Part Number A B C D E F G Average Weights** By Shell Size Max. Max. Max. Max. Max. +/-.005 (0.13) Max. oz. (gm.) +/- 5% MDM-9P*.785 (19.94).334 (8.48).400 (10.16).270 (6.86).308 (7.82).565 (14.35).185 (4.70).063 (1.79) MDM-9S*.785 (19.94).402 (10.21).400 (10.16).270 (6.86).308 (7.82).565 (14.35).253 (6.43).063 (1.79) MDM-15P*.935 (23.75).484 (12.29).550 (13.97).270 (6.86).308 (7.82).715 (18.16).185 (4.70).084 (2.39) MDM-15S*.935 (23.75).552 (13.97).550 (13.97).270 (6.86).308 (7.82).715 (18.16).253 (6.43).083 (2.37) MDM-21P* (27.56).634 (16.10).700 (17.78).270 (6.86).308 (7.82).865 (21.97).185 (4.70).105 (2.99) MDM-21S* (27.56).702 (17.83).700 (17.78).270 (6.86).308 (7.82).865 (21.97).253 (6.43).104 (2.97) MDM-25P* (30.10).734 (18.64).800 (20.32).270 (6.86).308 (7.82).965 (24.51).185 (4.70).119 (3.39) MDM-25S* (30.10).802 (20.37).800 (20.32).270 (6.86).308 (7.82).965 (24.51).253 (6.43).118 (3.36) MDM-31P* (33.91).884 (22.45).950 (24.13).270 (6.86).308 (7.83) (28.32).185 (4.70).140 (3.99) MDM-31S* (33.91).952 (24.18).950 (24.13).270 (6.86).308 (7.83) (28.32).253 (6.43).139 (3.96) MDM-37P* (37.72) (26.26) (27.94).270 (6.86).308 (7.82) (32.13).185 (4.70).161 (4.59) MDM-37S* (37.72) (27.99) (27.94).270 (6.86).308 (7.82) (32.13).253 (6.43).160 (4.56) MDM-51P* (36.45).984 (24.99) (26.67).310 (7.87).351 (8.92) (30.86).228 (5.79).193 (5.50) MDM-51S* (36.45) (26.72) (26.67).310 (7.87).351 (8.92) (30.86).296 (7.52).188 (5.35) MDM-100P* (55.12) (35.15) (36.63).360 (9.14).394 (10.01) (45.72).271 (6.88).500 (14.3) MDM-100S* (55.12) (38.10) (36.63).360 (9.14).394 (10.01) (45.72).394 (10.01) (29.5) *Add lead type and length; see How to Order. **Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails Panel Mounting Dimensions (Sizes 9-100) 218 Plug and Receptacle Rear Mounted Dimensions are shown in Inches (mm) unless otherwise indicated. Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted

7 Dimensions BS (Board Straight) Series.186 (4.72) MAX PLUG.198 (5.03) MAX RECEPTACLE D E H J K.109±0.15 (2.77±0.38) NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped. Part Number A B C D E F G H J K By Shell Size Max. ±.007 (.018) ±.005 (.013) Max. Max. ±.005 (.013) Max. Max. Max. Max. MDM-9PBS* (35.31) (29.21).565 (14.35).785 (19.94).334 (8.48).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-9SBS* (35.31) (29.21).565 (14.35).785 (19.94).402 (10.21).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-15PBS* (35.31) (29.21).715 (18.16).935 (23.75).484 (12.29).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-15SBS* (35.31) (29.21).715 (18.16).935 (23.75).552 (13.97).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-21PBS* (43.93) (36.83).865 (21.97) (27.56).634 (16.10).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-21SBS* (43.93) (36.83).865 (21.97) (27.56).702 (17.83).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-25PBS* (44.20) (38.10).965 (24.51) (30.10).734 (18.64).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-25SBS* (44.20) (38.10).964 (24.51) (30.10).802 (20.37).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-31PBS* (51.82) (45.72) (28.32) (33.91).884 (22.45).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-31SBS* (51.82) (45.72) (28.32) (33.91).952 (24.18).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-37PBS* (59.44) (53.34) (32.13) (37.72) (26.26).185 (4.70).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-37SBS* (59.44) (53.34) (32.13) (37.72) (27.99).253 (6.43).308 (7.82).165 (4.19).355 (9.02).555 (14.10) MDM-51PBS* (67.66) (50.80) (30.86) (36.45).984 (24.99).228 (5.79).351 (8.92).165 (4.19).355 (9.02).555 (14.10) MDM-51SPS* (67.66) (50.80) (30.86) (36.45) (26.72).296 (7.52).351 (8.92).165 (4.19).355 (9.02).555 (14.10) MDM-100PBS* (77.98) (71.12) (45.72) (55.24) (35.15).271 (6.88).460 (11.68).303 (7.70).550 (12.70).686 (17.42) MDM-100SBS* (77.98) (71.12) (45.72) (55.24) (38.30).394 (10.01).460 (11.68).303 (7.70).550 (12.70).686 (17.42) *For jackpost, add letter P or M7 for sizes 9-41, M17 for size 100. Dimensions are shown in inches (millimeters). Dimensions are subject to change. BS (Board Straight) Pin Termination Arrangements View PCB Solder Side 9 Contacts 15 Contacts 21 Contacts 25 Contacts 31 Contacts 37 Contacts 51 Contacts 219

8 BR (Board Right Angle) Series Dimensions.186 (4.72) MAX. PLUG.198 (5.05) MAX B D JACKPOST #2-56 UNC-2B TYP..125±.015 (3.18±.038).100 (2.54) TYP. + + F.050 (1.27) TYP..100 TYP..096±.010 (2.44±0.31).150±.010 (3.8±.038) NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dipped. Part Number A B C D E F G By Shell Size Max. ±.007 (.018) ±.005 (.013) Max. Max. Max. Max. MDM-9PBR* (35.31) (29.21).565 (14.35).334 (8.48).185 (4.70).455 (11.56).308 (7.82) MDM-9SBR* (35.31) (29.21).565 (14.35).402 (10.21).253 (6.43).455 (11.56).308 (7.82) MDM-15PBR* (39.12) (33.02).715 (18.16).484 (12.29).185 (4.70).455 (11.56).308 (7.82) MDM-15SBR* (39.12) (33.02).715 (18.16).552 (13.97).253 (6.43).455 (11.56).308 (7.82) MDM-21PBR* (42.93) (36.83).865 (21.97).634 (16.10).185 (4.70).455 (11.56).308 (7.82) MDM-21SBR* (42.93) (36.83).865 (21.97).702 (17.83).253 (6.43).455 (11.56).308 (7.82) MDM-25PBR* (45.47) (39.37).965 (24.51).734 (18.64).185 (4.70).455 (11.56).308 (7.82) MDM-25SBR* (45.47) (39.37).965 (24.51).802 (20.37).253 (6.43).455 (11.56).308 (7.82) MDM-31PBR* (51.82) (45.72) (28.32).884 (22.45).185 (4.70).455 (11.56).308 (7.82) MDM-31SBR* (51.82) (45.72) (28.32).952 (24.18).253 (6.43).455 (11.56).308 (7.82) MDM-37PBR* (59.44) (53.34) (32.13) (26.26).185 (4.70).455 (11.56).308 (7.82) MDM-37SBR* (59.44) (53.34) (32.13) (27.99).253 (6.43).455 (11.56).308 (7.82) MDM-51PBR* (47.63) (40.64) (30.86).984 (24.99).228 (7.52).565 (14.35).351 (8.92) MDM-51SBR* (47.63) (40.64) (30.86) (26.72).296 (7.52).565 (14.35).351 (8.92) *For jackpost, add letter P or M7 for sizes Dimensions are shown in inches (millimeters). Dimensions are subject to change. BR (Board Right Angle) Pin Termination Arrangements View PCB Solder Side 9 Contacts 15 Contacts 21 Contacts 25 Contacts 31 Contacts 37 Contacts 51 Contacts 220

9 Dimensions CBR (Condensed Board Right Angle) Series NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped. Part Number A B C D E F G H By Shell Size Max. ±.005 (.013) Max. Max. Max. Max. ±.010 (.025) ±.010 (.025) MDM-9PCBR*.785 (19.94).565 (19.94).334 (8.48).308 (7.82).185 (4.70).420 (10.67).250 (6.35).230 (5.18) MDM-9SCBR*.785 (19.94).565 (19.94).402 (10.21).308 (7.82).253 (6.43).420 (10.67).250 (6.35).230 (5.18) MDM-15PCBR*.935 (23.75).715 (18.16).484 (12.29).308 (7.82).185 (4.70).420 (10.67).250 (6.35).130 (3.30) MDM-15SCBR*.935 (23.75).715 (18.16).552 (13.87).308 (7.82).253 (6.43).420 (10.67).250 (6.35).130 (3.30) MDM-21PCBR* (27.56).865 (21.97).634 (16.10).308 (7.82).185 (4.70).420 (10.67).250 (6.35).130 (3.30) MDM-21SCBR* (27.56).865 (21.97).702 (17.83).308 (7.82).253 (6.43).420 (10.67).250 (6.35).130 (3.30) MDM-25PCBR* (30.10).965 (24.51).734 (18.64).308 (7.82).185 (4.70).420 (10.67).250 (6.35).130 (3.30) MDM-25SCBR* (30.10).965 (24.51).802 (20.37).308 (7.82).253 (6.43).420 (10.67).250 (6.35).130 (3.30) MDM-31PCBR* (33.91) (28.32).884 (22.45).308 (7.82).185 (4.70).520 (13.21).250 (6.35).130 (3.30) MDM-31SCBR* (33.91) (28.32).952 (24.18).308 (7.82).253 (6.43).520 (13.21).250 (6.35).130 (3.30) MDM-37PCBR* (37.72) (32.13) (26.26).308 (7.82).185 (4.70).520 (13.21).250 (6.35).130 (3.30) MDM-37SCBR* (37.72) (32.13) (27.99).308 (7.82).253 (6.43).520 (13.21).250 (6.35).130 (3.30) MDM-51PCBR* (36.45) (30.86).984 (24.99).351 (8.92).228 (5.79).650 (16.15).300 (7.62).150 (3.81) MDM-51SCBR* (36.45) (30.86) (26.72).351 (8.92).296 (7.52).650 (16.15).300 (7.62).150 (3.81) MDM-100PCBR* (55.12) (45.72) (35.15).394 (10.01).271 (6.88) (25.40).400 (10.16).200 (5.08) MDM-100SCBR* (55.12) (45.72) (38.10).394 (10.01).394 (10.01) (25.40).400 (10.16).200 (5.08) *For jackpost, add letter P or M7 for sizes 9-41, M17 for size 100. Dimensions are shown in inches (millimeters). Dimensions are subject to change. CBR (Condensed Board Right Angle) Pin Termination Arrangements View PCB Solder Side 9 Contacts 15 Contacts 21 Contacts 25 Contacts 31 Contacts 37 Contacts 51 Contacts 100 Contacts 221

10 Accessories Jackpost Bushing (for rear panel mounting for sizes 9-51) Plug and Receptacle Panel Cutout Dimensions 222 Jackpost diameter is.124/.120 (3.15/3.05). Jackpost Kit Panel Number* Thickness /32 (2.4) /16 (1.6) /64 (1.2) /32 (0.8) *A kit consists of 2 jackposts, 2 nuts, 2 washers. Mounting Hardware Views for sizes 9-51 Screw Lock Assembly 90 Angle Mounting Bracket Dimensions are shown in Inches (mm) unless otherwise indicated. Screw Lock Assembly* *NOTE: Torque value is 2.5 in/lbs max. A B Shell (0.10) (0.10) C Size.000 (0.00).000 (0.00) ±.005 (0.13) (10.19).252 (6.40).565 (14.35) (14.00).252 (6.40).715 (18.16) (17.81).252 (6.40).865 (21.97) (20.34).252 (6.40).965 (24.51) (24.16).252 (6.40) (28.34) (27.97).252 (6.40) (32.13) (26.70).295 (7.49) (30.86) 90 Angle Mounting Bracket Jackpost - (P) A B Part Number Description ±.005(±0.13) Max Screw Lock Assembly N/A Jackpost Kit N/A Mounting Bracket 90 MDM.147 (3.73).308 (7.82) for 9 thru 37 Shell Sizes Mounting Bracket 90 MDM.169 (4.29).350 (8.89) for 51 Shell Size NOTES: Screw lock assembly ( ) can be used for front mounting only. Jackpost kit ( ) consists of two assemblies, shipped unassembled.

11 Accessories Mounting Hardware Views (for sizes 9-51) This hardware is factory installed. Float Mount - (F) Jackscrew - (K) Standard Jackscrew - (L) Low Profile Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. *NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs. Standard Jackscrew (K)-2.5 in/lbs. Mounting Hardware to Military Specification (for sizes 9-100) per MIL-DTL-83513/05 This hardware supplied in kits unassembled (2 pieces of each item). Figure 1. Jackscrew - Low profile Slotted Head Size 9-51 Size 100* Figure 2. Jackscrew - High profile Slotted Head Size 9-51 Size 100* To order hardware kits separately, order either by M83513/05-** or by X-XXX. Figure 3. Jackscrew - Jackpost Assembly Size 9-51 Size 100* Allen Head Optional Head Configuration Plug and Receptacle Low and High Profile Size 9-51 Size 100* Size 9-51 Size 100* Description Mod Code Part Number Mil # Mod Code Part Number Mil # Slotted Head Jackscrew Assy Low Profile M M83513/05-05 M M83513/05-15 (Figure 1) Slotted Head Jackscrew Assy High Profile M M83513/05-06 M M83513/05-16 (Figure 2) Allen Head Jackscrew Assy Low Profile M M83513/05-02 M M83513/05-12 (Figure 1) Allen Head Jackscrew Assy High Profile M M83513/05-03 M M83513/05-13 (Figure 2) Jackpost Assy M M83513/05-07 M M83513/05-17 (Figure 3) *Size 100 requires B1 size mounting holes. 223

12 Size 100 Mounting Hardware Views This hardware supplied unassembled. Accessories Angle Mounting Bracket Jackpost - (P) Pre-Installed Hardware This hardware is factory installed. Float Mounting - (F) Std. 90 Angle Mounting Bracket Jackscrew - (K) Slotted Head Jackscrew - (L) (Low Profile) *NOTE: Torque values are as follows: Low Profile Jackscrew (L)-4.0 in/lbs. Standard Jackscrew (K)-4.0 in/lbs. Jackpost Bushing for Rear Panel Mounting Dimensions for Rear Panel Mounting Jackpost Kit Number* Panel Thickness /32 (2.4) /16 (1.6) /32 (0.8) /64 (1.2) *2 jackposts, 2 nuts, 2 washers 224 Dimensions are shown in Inches (mm) unless otherwise indicated.

13 Panel Cutouts Dimensions 9-51 Shell Sizes Figure 1 Front Mounting Figure 2 Rear Mounting Figure 3 Edgeboard Mounting 9-51 Shell Sizes NOTES: 1. Front mounting (Figure 1) and rear mounting (Figure 2) accommodates #2-56 screws. 2. Front mounting is preferred. However, when rear mounting is necessary, use Figure 2 dimensions when jackscrews are used. See detail on jackposts page 222. Shell Size 100 A B C D Shell Cutout (0.10) (0.10) (0.13) (0.13) Size Figure (0.00) (0.00) (0.00) (0.00) (10.36).271 (6.88).570 (14.48).089 (2.26) (10.19).252 (6.40).570 (14.48).089 (2.26) (14.48).089 (2.26) (14.17).271 (6.88).720 (18.29).089 (2.26) (14.00).252 (6.40).720 (18.29).089 (2.26) (18.29).089 (2.26) (17.98).271 (6.88).870 (22.10).089 (2.26) (17.81).252 (6.40).870 (22.10).089 (2.26) (22.10).089 (2.26) (20.52).271 (6.88).970 (24.64).089 (2.26) (20.34).252 (6.40).970 (24.64).089 (2.26) (24.64).089 (2.26) (24.33).271 (6.88) (28.45).089 (2.26) (24.16).252 (6.40) (28.45).089 (2.26) (28.45).089 (2.26) (28.14).271 (6.88) (32.26).089 (2.26) (27.97).252 (6.40) (32.26).089 (2.26) (32.26).089 (2.26) (26.87).315 (8.00) (30.99).089 (2.26) (26.70).295 (7.49) (30.99).089 (2.26) (30.99).089 (2.26) Dimensions are shown in Inches (mm) unless otherwise indicated. Figure 5 Front Mounting Figure 6 Rear Mounting Edgeboard Mounting For 100 Shell Size NOTES: 1. Front mounting (Figure 5) and rear mounting (Figure 6) accommodates #4-40 screws. 2. Front mounting is preferred. However, when rear mounting is necessary, use Figure 6 dimensions. 225

14 Plugs How to Order M83513/01 M83513/ Pre-Wired Leads Standard 26 AWG Stranded TFE M22759/11 High Performance Aerospace 26 AWG Stranded ETFE M22759/33 (Electroless Nickel plated only) Number of Circuits White Color Coded White Color Coded 18" 36" 72" 18" 36" 72" 18" 36" 72" 18" 36" 72" 9 03A01* 03A02* 03A13* 03A03* 03A04* 03A14* 03A09N 03A10N 03A15N 03A11N 03A12N 03A16N 15 03B01* 03B02* 03B13* 03B03* 03B04* 03B14* 03B09N 03B10N 03B15N 03B11N 03B12N 03B16N 21 03C01* 03C02* 03C13* 03C03* 03C04* 03C14* 03C09N 03C10N 03C15N 03C11N 03C12N 03C16N 25 03D01* 03D02* 03D13* 03D03* 03D04* 03D14* 03D09N 03D10N 03D15N 03D11N 03D12N 03D16N 31 03E01* 03E02* 03E13* 03E03* 03E04* 03E14* 03E09N 03E10N 03E15N 03E11N 03E12N 03E16N 37 03F01* 03F02* 03F13* 03F03* 03F04* 03F14* 03F09N 03F10N 03F15N 03F11N 03F12N 03F16N 51 03G01* 03G02* 03G13* 03G03* 03G04* 03G14* 03G09N 03G10N 03G15N 03G11N 03G12N 03G16N H01* 03H02* 03H13* 03H03* 03H04* 03H14* 03H09N 03H10N 03H15N 03H11N 03H12N 03H16N Bold part numbers are in stock; chose for fast delivery. Receptacles M83513/02 M83513/ Pre-Wired Leads Standard 26 AWG Stranded TFE M22759/11 High Performance Aerospace 26 AWG Stranded ETFE M22759/33 (Electroless Nickel plated only) Number of Circuits White Color Coded White Color Coded 18" 36" 72" 18" 36" 72" 18" 36" 72" 18" 36" 72" 9 04A01* 04A02* 04A13* 04A03* 04A04* 04A14* 04A09N 04A10N 04A15N 04A11N 04A12N 04A16N 15 04B01* 04B02* 04B13* 04B03* 04B04* 04B14* 04B09N 04B10N 04B15N 04B11N 04B12N 04B16N 21 04C01* 04C02* 04C13* 04C03* 04C04* 04C14* 04C09N 04C10N 04C15N 04C11N 04C12N 04C16N 25 04D01* 04D02* 04D13* 04D03* 04D04* 04D14* 04D09N 04D10N 04D15N 04D11N 04D12N 04D16N 31 04E01* 04E02* 04E13* 04E03* 04E04* 04E14* 04E09N 04E10N 04E15N 04E11N 04E12N 04E16N 37 04F01* 04F02* 04F13* 04F03* 04F04* 04F14* 04F09N 04F10N 04F15N 04F11N 04F12N 04F16N 51 04G01* 04G02* 04G13* 04G03* 04G04* 04G14* 04G09N 04G10N 04G15N 04G11N 04G12N 04G16N H01* 04H02* 04H13* 04H03* 04H04* 04H14* 04H09N 04H10N 04H15N 04H11N 04H12N 04H16N Bold part numbers are in stock; chose for fast delivery. How to Select Connector Part # Example: M83513/ 25A01 * Same Number for Plug or Receptacles Leads: Example.109 Straight Printed Circuit Tails C = Cadmium N = Electroless Nickel N = No Jackpost Insertion P = Jackpost Insertion 226

15 How to Order Pre-Wired Leads Straight Printed Circuit Tails Right Angle Printed Circuit Tails M83513/ 25 AWG Solid 1/2" 25 AWG Solid 1" Condensed Footprint Wide Footprint Uninsulated" Uninsulated" Solder Length in inches Length in inches Length in inches Number Tinned Gold Tinned Gold of Circuits Leads Leads Leads Leads (2.77) (3.56) (4.37) (2.77) (3.56) (4.37) (2.77) (3.56) (4.37) 9 03A07* 03A05* 03A08* 03A06* 01A* 22A01* 22A02* 22A03* 10A01* 10A02* 10A03* 16A01* 16A02* 16A03* 15 03B07* 03B05* 03B08* 03B06* 01B* 22B01* 22B02* 22B03* 10B01* 10B02* 10B03* 16B01* 16B02* 16B03* 21 03C07* 03C05* 03C08* 03C06* 01C* 22C01* 22C02* 22C03* 10C01* 10C02* 10C03* 16C01* 16C02* 16C03* 25 03D07* 03D05* 03D08* 03D06* 01D* 22D01* 22D02* 22D03* 10D01* 10D02* 10D03* 16D01* 16D02* 16D03* 31 03E07* 03E05* 03E08* 03E06* 01E* 22E01* 22E02* 22E03* 10E01* 10E02* 10E03* 16E01* 16E02* 16E03* 37 03F07* 03F05* 03F08* 03F06* 01F* 22F01* 22F02* 22F03* 10F01* 10F02* 10F03* 16F01* 16F02* 16F03* 51 03G07* 03G05* 03G08* 03G06* 01G* 23G01* 23G02* 23G03* 11G01* 11G02* 11G03* 17G01* 17G02* 17G03* H07* 03H05* 03H08* 03H06* 01H* 24H01* 24H02* 24H03* 12H01* 12H02* 12H03* 18H01* 18H02* 18H03* Pre-Wired Leads Straight Printed Circuit Tails Right Angle Printed Circuit Tails M83513/ 25 AWG Solid 1/2" 25 AWG Solid 1" Condensed Footprint Wide Footprint Uninsulated" Uninsulated" Solder Length in inches Length in inches Length in inches Number Tinned Gold Tinned Gold of Circuits Leads Leads Leads Leads (2.77) (3.56) (4.37) (2.77) (3.56) (4.37) (2.77) (3.56) (4.37) 9 04A07* 04A05* 04A08* 04A06* 02A* 25A01* 25A02* 25A03* 13A01* 13A02* 13A03* 19A01* 19A02* 19A03* 15 04B07* 04B05* 04B08* 04B06* 02B* 25B01* 25B02* 25B03* 13B01* 13B02* 13B03* 19B01* 19B02* 19B03* 21 04C07* 04C05* 04C08* 04C06* 02C* 25C01* 25C02* 25C03* 13C01* 13C02* 13C03* 19C01* 19C02* 19C03* 25 04D07* 04D05* 04D08* 04D06* 02D* 25D01* 25D02* 25D03* 13D01* 13D02* 13D03* 19D01* 19D02* 19D03* 31 04E07* 04E05* 04E08* 04E06* 02E* 25E01* 25E02* 25E03* 13E01* 13E02* 13E03* 19E01* 19E02* 19E03* 37 04F07* 04F05* 04F08* 04F06* 02F* 25F01* 25F02* 25F03* 13F01* 13F02* 13F03* 19F01* 19F02* 19F03* 51 04G07* 04G05* 04G08* 04G06* 02G* 26G01* 26G02* 26G03* 14G01* 14G02* 14G03* 20G01* 20G02* 20G03* H07* 04H05* 04H08* 04H06* 02H* 27H01* 27H02* 27H03* 15H01* 15H02* 15H03* 21H01* 21H02* 21H03* How to Select Hardware Part # Hardware Example: M83513/05-05 Low Profile Slotted Jackscrew with a Connector Size of 9-51 M83513/05- Slotted Jackscrew Allen Head Jackscrew Connector Size Low Profile High Profile Low Profile High Profile Jackpost Dimensions are shown in Inches (mm) unless otherwise indicated. 227

MIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS

MIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS CONNECTING YOUR ENGINEERING PASSION Series MIL-DTL-353 Micro-D MILITARY STYLE CONNECTORS MILITARY & DEFENSE EDITION Lightweight, High-Density Connectors Pre-Assembled Wire Harnesses PCB Angled & Straight

More information

Section L MIL-DTL Micro-D Connectors

Section L MIL-DTL Micro-D Connectors Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

Microminiature Connectors

Microminiature Connectors Microminiature Connectors Product Manager August 2013 The Microminiature Range 3 basic families of small pitch connectors CENTI Line - 0.075" / 1.90mm pitch between contacts 2D double density, CTA strip,

More information

P Straight PCB Panel Mount Receptacle

P Straight PCB Panel Mount Receptacle How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied

More information

Connection Systems. Bulls-Eye Subminiature Circular Connectors

Connection Systems. Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high

More information

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The

More information

ITT Cannon KJL Series MIL-DTL Series I Connectors

ITT Cannon KJL Series MIL-DTL Series I Connectors APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

How to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION

How to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308

More information

High-Performance Micro-D Connectors and Cables

High-Performance Micro-D Connectors and Cables High-Performance Micro-D Connectors and Cables MIL-DTL-83513 QPL d Products as Well as the World s Largest Selection of Commercial Solutions U n i t e d S t a t e s U n i t e d K i n g d o m G e r m a

More information

EN3716 SAE AS81659 ARINC

EN3716 SAE AS81659 ARINC 6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

More information

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10 SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

PCB Single Row Connectors

PCB Single Row Connectors SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

AMPLIMITE.050 Series Cable Assemblies, Series III

AMPLIMITE.050 Series Cable Assemblies, Series III Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements

More information

HyperGrip - Push/Pull Plastic Circular Connectors

HyperGrip - Push/Pull Plastic Circular Connectors A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]

More information

S Straight PCB Panel Mount Plugs

S Straight PCB Panel Mount Plugs Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole

More information

P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION

P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied

More information

Microminiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.

Microminiature. Micro Edgeboard -.050 Contact Spacing MEB. Specifications. How to Order. ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne

More information

CHARACTERISTIC SPECIFICATION

CHARACTERISTIC SPECIFICATION MICRO-D SERIES Microminiature connectors with solder bucket termination ESCC 3401/029 Features and Benefits Compliant with ESA specifications High performance Micropin contact system ( twist pin spring

More information

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use

More information

Micro-D Printed Circuit Board Connectors

Micro-D Printed Circuit Board Connectors PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the

More information

MICRO-D SERIES. Microminiature connectors with solder bucket termination CS FR022. Features and Benefits. Typical Applications

MICRO-D SERIES.  Microminiature connectors with solder bucket termination CS FR022. Features and Benefits. Typical Applications MICRO-D SERIES Microminiature connectors with solder bucket termination CS FR022 Features and Benefits High performance Micropin contact system ( twist pin spring male contact and tubular socket contact)

More information

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Varicon. Series  x.130 x.150 Grid Pattern FEATURES TECHNICAL SPECIFICATIONS Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

More information

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43 Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform

More information

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Varicon. Series  x.130 x.150 Grid Pattern FEATURES TECHNICAL SPECIFICATIONS Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

More information

Micro-D TwistPin Connectors and Accessories Product Selection Guide

Micro-D TwistPin Connectors and Accessories Product Selection Guide Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and

More information

38999 Series III Composite Connectors

38999 Series III Composite Connectors 8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC

More information

CONTENTS HMK SERIES X.100 CONNECTORS

CONTENTS HMK SERIES X.100 CONNECTORS HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight

More information

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

MIL-DTL Series IV Connectors

MIL-DTL Series IV Connectors DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide

More information

- (90 - f (GHz)) db (.05 SQT(f(GHz))) db

- (90 - f (GHz)) db (.05 SQT(f(GHz))) db TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory

More information

Cannon Mil-DTL Class G Space Grade Connectors. Interconnect Solutions

Cannon Mil-DTL Class G Space Grade Connectors. Interconnect Solutions Cannon Mil-DTL 38999 Class G Space Grade Connectors Interconnect Solutions The Challenge Our traditional and longest served Space System customers approached ITT ICS regarding the deployment of Mil-DTL

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

Features/Benefits. Typical Applications

Features/Benefits. Typical Applications Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials

More information

SCE. Snatch Connector Electrical Series

SCE. Snatch Connector Electrical Series SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66

SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66 Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical

More information

Table of Contents SMA CONNECTORS

Table of Contents SMA CONNECTORS Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End

More information

RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES

RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification

More information

MMC RTX series EN3716

MMC RTX series EN3716 MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

More information

97 series crimp type plugs with solid shells

97 series crimp type plugs with solid shells 97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24

More information

Amphenol 67 and 165 Series Miniaturized Standard Connectors

Amphenol 67 and 165 Series Miniaturized Standard Connectors Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................

More information

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among

More information

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22 Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...

More information

Micro-D Metal Shell -.050" Contact Spacing

Micro-D Metal Shell -.050 Contact Spacing Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than

More information

HT STRAIGHT ADAPTER, WRENCH FLATS ( )

HT STRAIGHT ADAPTER, WRENCH FLATS ( ) HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS

More information

MIL-C Fiber Optic Connectors

MIL-C Fiber Optic Connectors Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh

More information

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes

More information

TE Connectivity DEUTSCH Single Module EN4165 connectors

TE Connectivity DEUTSCH Single Module EN4165 connectors Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors

More information

Allen Electric Connector Sales, Inc. (AECS, Inc.)

Allen Electric Connector Sales, Inc. (AECS, Inc.) Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom

More information

APPLICATION INFORMATION APPLICATION INFORMATION

APPLICATION INFORMATION APPLICATION INFORMATION RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5

More information

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles... CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...

More information

microcomp SERIES Miniature Lightweight High Density Connectors Space Grade - ESA QPL

microcomp SERIES Miniature Lightweight High Density Connectors Space Grade - ESA QPL microcomp SERIES Miniature Lightweight High Density Connectors Space Grade - ESA QPL Space Grade microcomp Contents Overview... 4 Features and benefits... 6 Comparison with micro-d... 7 Comparison with

More information

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,

More information

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

305/315/355 SERIES CARD EDGE CONNECTOR.156 (3.96mm) Contact Spacing 305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style

More information

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

2.92mm connectors DIVIDER PAGE

2.92mm connectors DIVIDER PAGE connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A

More information

T he Cole Series S3900 miniature P.C. termination rotary switch

T he Cole Series S3900 miniature P.C. termination rotary switch S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,

More information

We Design Small Miracles

We Design Small Miracles We Design Small Miracles PRODUCTS & MATERIALS Micro Strip Connector Circular Connector Nano Connector Bilobe Connector Connector Size / Weight of Micro vs Nano Bi-Lobe Micro-D Connector - 25 Pin Weight:

More information

2.4mm connectors 155

2.4mm connectors 155 connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.

More information

Galley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market

Galley Connectors. Intermateable and Interchangeable Ability to mate with other ARINC 810 galley connectors in the market Galley Connectors Intermateable and interchangeable with other ARINC 810 galley connectors, Amphenol Pcd s APeX Galley Connector, Rectangular is a reliable, robust, connector that uses overmold technology

More information

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC) SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.

More information

TNC Series Series C TN 114

TNC Series Series C TN 114 TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315

More information

BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ

BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom

More information

341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing

341/391 SERIES CARD EDGE CONNECTOR.100 (2.54mm) Contact Spacing 341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5

DEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5 DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series

More information

Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold

Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical

More information

12-M1. Amphenol. Micro-Miniature Connectors for Harsh Environments

12-M1. Amphenol. Micro-Miniature Connectors for Harsh Environments 12-M1 Micro-Miniature Connectors for Harsh Environments About Aerospace Your Source for Interconnect Products CONTACT US: Aerospace 40-60 Delaware Avenue Sidney, NY 13838-13 Customer Service: Mon - Fri

More information

Type N connectors DIVIDER PAGE

Type N connectors DIVIDER PAGE Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110

More information

COIN CELL PC BATTERY HOLDERS

COIN CELL PC BATTERY HOLDERS COIN CELL PC BATTERY HOLDERS 20mm to 30mm Sizes 12mm to 16mm & 1/3 N Sizes SINGLE CELL HOLDER (3-VOLT) DUAL CELL HOLDER (6-VOLT) Single and Dual Printed Circuit Cell Holders for Lithium Coin Cells. Designed

More information

ARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties

ARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion

More information

DETAIL SPECIFICATION SHEET

DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-55302/52D 12 September 2012 SUPERSEDING MIL-DTL-55302/52D 17 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU,

More information

microcomp SERIES Miniature Lightweight High Density Connectors

microcomp SERIES Miniature Lightweight High Density Connectors microcomp SERIES Miniature Lightweight High Density Connectors Contents Overview... 4 Features and benefits...5-6 Comparison with high density D-Sub... 7 Comparison with micro-d... 8 Technical Features...

More information

MICRO-CONNECTOR CMM SERIES

MICRO-CONNECTOR CMM SERIES MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm

More information

DIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE

DIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0

More information

MIL-C Circular Connectors

MIL-C Circular Connectors MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers

More information

Cover headline Cannon Cover headline Nemesis Series

Cover headline Cannon Cover headline Nemesis Series Cover Cannon headline Cover Nemesis headline Series 2 Nemesis Series By choosing the Nemesis range you will be reassured you are working with a partner who has more than 90 years of experience of connector

More information

mcx connectors DIVIDER PAGE

mcx connectors DIVIDER PAGE mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM

More information

for Quadrax and ELIO 8

for Quadrax and ELIO 8 1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467

More information

PART NUMBER BREAKDOWN

PART NUMBER BREAKDOWN SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options

More information

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

3M Connector System 0.050 x 0.100 Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9

More information

1Rack and Panel Connectors

1Rack and Panel Connectors Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3

More information

Proven Quality, Reliability & Expertise

Proven Quality, Reliability & Expertise CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,

More information

T he Cole Series P3900 miniature P.C. termination rotary switch

T he Cole Series P3900 miniature P.C. termination rotary switch P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,

More information

Luminus Series Amphenol Pcd

Luminus Series Amphenol Pcd Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet

More information

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd

PEGASUS SERIES. Amphenol Pcd. Amphenol Pcd PEGASUS SERIES Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation

More information

Interface Mating Dimensions

Interface Mating Dimensions SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer

More information