OMNIMATE Power PCB terminals
|
|
|
- Evan McDowell
- 5 years ago
- Views:
Transcription
1 Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension dimension dimension dimension
2 Clamping yoke screw connection Explanation OMNIMTE ower OMNIMTE ower igh-power connections up to 150 /1,000 The OMNIMTE ower ranging from the LU in pitch to the LXXX in pitch is approved for unlimited international use in applications according to UL 1059 (600 ) and IEC (1,000 ). Weidmüller s self-securing steel clamping yoke is 100 % maintenance free. It provides vibration-proof connections to the CB for wires up to 50. Unrivalled clamping With an unmatched clamping range, the LXXX 15.0 offers a safe and strong wire connection for cross-sections up to 50 / WG1 and 150 to the circuit board. 50 ower reserve for safety The high-performance WEMID insulation material helps increase the availability of the system. With an RTI (relative temperature index) of 120 C, the OMNIMTE ower CB terminals exceed the upper continuous-use temperature recoended by the Standard (100 C) by 20 C. Thus there are more power reserves and improved safety in event of temperature fluctuations or overloads. Load current I [] LXXX 15.00/90 / 07-R min. No. of poles (2-pole) 160 Conductor current 120 EN max. No. of poles (4-pole) Screw connection system The automatically counter-operating Weidmüller steel clamping yoke uses force generated by tightening the screw to open the upper thread. Settling of the connected wires and vibrations are compensated for and this guarantees a maintenance free operation. Subsequent tightening and maintenance of the screw is not needed mbient temperature T [ C].2
3 Clamping yoke screw connection Explanation Standard-compliant integration Weidmüller terminals meet the extended creepage and clearance distances according to UL and finger safety in accordance with the IEC device standard. Z Wire protection The integrated Wire Guard mechanism on the OMNIMTE ower prevents wires from being inserted improperly and prevents a malfunctioning contact. OMNIMTE ower L 1 T IEC :2007 Integrated test point The required maintenance and measurements can be carried out in a safe, reliable and convenient manner. Labelling and assigning Terminals are available with custom direct printing, versatile Dekafix labelling, affordable adhesive strips and colour coding..3
4 Clamping yoke screw connection Quick selection Orientation OMNIMTE ower = 300 (UL) / 1,000 (IEC) = 600 (UL) / 1,000 (IEC) Type of connection Clamping range Type IEC / UL age Screw Clamping yoke 6 LL 6.35/../90 * LU IEC: 1,000 /32 / UL: 600 /30 /WG IEC: 1,000 /76 / UL: 300 /65 /WG LU IEC: 1,000 /76 / UL: 300 /58 /WG LU 10.16/../90 * IEC: 1,000 /76 / UL: 600 /51 /WG Screw 25 LU LX LXB IEC: 1,000 /76 / UL: 600 /58 /WG 26-6 IEC: 1,000 /101 / UL: 600 /85 /WG 16-4 IEC: 1,000 /101 / UL: 600 /85 /WG LXXX LXXX 15.00/../90F IEC: 1,000 /150 / UL: 600 /127 /WG 20-1 IEC: 1,000 /150 / UL: 600 /127 /WG * With offset solder pins.4
5 Clamping yoke screw connection Quick selection, in Max. rated voltage, IEC UL nominal voltage UL 1, OMNIMTE ower.5
6 Clamping yoke screw connection - dimension 6.35 LL 6.35 roduct data LL 6.35 OMNIMTE ower igh-power CB terminal with proven clamping yoke screw connection, 6.35 pitch, for conductor crosssections up to 6. UL 600 approval for unlimited international use in devices. Increased derating reserves due to the use of WEMID insulating material. Conductor outlet direction of 90 Block construction for versions up to 12 poles IEC: 1000 / 32 / UL: 600 / 30 / WG For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards , " 7, " 28, " 15, " Ø 1,3 + 0, " " " " Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 4.0, Z 1 DIN C 40 C III III II Wemid () -0 Cu-Leg tinned ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 0.8X4.0X SDS 0.8X4.0X Crosshead screwdriver SDK Z Representative deratings curve.6
7 OMNIMTE ower.7
8 Clamping yoke screw connection - dimension LU 10.16/../90 roduct data LU 10.16/../90 OMNIMTE ower igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 16 (WG 6). Increased derating reserves because WEMID insulating material is used. Wire outlet direction: 90 version. 2- and 3-pole block construction can be aligned together for higher pole counts. IEC: 1000 / 76 / UL: 300 / 65 / WG 26-6 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. + 0, " 28, " 18, " 10, " 6, " 1,6 + 0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 5.5 DIN C 40 C 16 III III II Wemid () -0 E-Cu tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.0X5.5X SDS 1.0X5.5X Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.8
9 Clamping yoke screw connection - dimension LU 10.16/../90 roduct data LU 10.16/../90 igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 16 (WG 6). Increased derating reserves because WEMID insulating material is used. Wire outlet direction: 90 With integrated test point for the S 2.0 test plug. IEC: 1000 / 76 / UL: 300 / 58 / WG 26-6 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. with test point + 0, " 25, " OMNIMTE ower 31, " 10, " 11, " 1,6+0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 5.5 DIN C 40 C 16 III III II Wemid () -0 E-Cu tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.0X5.5X SDS 1.0X5.5X Crosshead screwdriver Test plug SDIK Z2 SDK Z2 S 2.0 MC Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.9
10 Clamping yoke screw connection - dimension LU 10.16/../90 roduct data LU 10.16/../90 OMNIMTE ower igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 16 (WG 6). UL 600 approval. Increased derating reserves because WEMID insulating material is used. Wire outlet direction: 90. With integrated test point for S 2.0 test plug. IEC: 1000 / 76 / UL: 600 / 51 / WG 22-6 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. with test point + 0, " 31, " 25, " 10, " 11, " Ø 1,6 + 0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 5.5 DIN C 40 C 16 III III II Wemid () -0 E-Cu tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.0X5.5X SDS 1.0X5.5X Crosshead screwdriver Test plug SDIK Z2 SDK Z2 S 2.0 MC Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.10
11 Clamping yoke screw connection - dimension LU 12.7/../90 roduct data LU 12.7/../90 igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 16. UL 600 approval. Increased derating reserves because WEMID insulating material is used. Wire outlet direction: 90. With integrated test point for S 2.0 test plug. IEC: 1000 / 76 / UL: 600 / 58 / WG 26-6 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. with test point + 0, " 31, " 25, " OMNIMTE ower 10, " 11, " 1,6+0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 5.5 DIN C 40 C 16 III III II Wemid () -0 E-Cu tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.0X5.5X SDS 1.0X5.5X Crosshead screwdriver Test plug SDIK Z2 SDK Z2 S 2.0 MC Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.11
12 Clamping yoke screw connection - dimension LX 15.00/../90 roduct data LX 15.00/../90 OMNIMTE ower igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 25 (WG 4). UL 600 approval. Increased derating reserves because WEMID insulating material is used. Wire outlet direction: 90. With integrated test point for S 2.0 test plug. ersions up to 8 poles have block construction. vailable with and without mounting flange. IEC: 1000 / 101 / UL: 600 / 85 / WG 16-4 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. with test point , " 1.144" " 12, " 13, " 3,8 0.15" Ø 1,6 + 0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 5.5 DIN C 40 C 25 III III II Wemid () -0 E-Cu tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.2X6.5X SDS 1.2X6.5X Crosshead screwdriver Test plug SDIK Z2 SDK Z2 S 2.0 MC Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.12
13 Clamping yoke screw connection - dimension LXB 15.00/../90 with fixing flange and test point LXBL 15.00/../90 with fixing flange left and test point OMNIMTE ower " " 29, " " " 29, " " " " " 12, " 13, " " 4, " 3, " 12, " 13, " Ø 5,5 + 0, " ,8 0.15" Ø 1,6 + 0, " Ø 5,5 + 0, " Ø 1,6 + 0, dditional deratings curves.13
14 Clamping yoke screw connection - dimension LXXX 15.00/../90 roduct data LXXX 15.00/../90 OMNIMTE ower igh-power CB Terminal with clamping yoke screw connection, in pitch for wire cross-sections up to 50 (WG 1). UL 600 approval for unlimited international usage in devices. Increased derating reserves because WEMID insulating material is used. Wire outlet direction of 90. With integrated test point for S 2.0 test plug. ersions up to 8 poles have block construction. vailable with and without mounting flange. IEC: 1000 / 150 / UL: 600 / 127 / WG 20-1 For additional articles and information, refer to catalog.weidmueller.com Note: dditional colours on request related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. I 20 from 16 to 50 with test point " 12, " 51, " " 15, " 3,8 0.15" Ø 1,6 + 0,1 Technical data In compliance with IEC / IEC Clamping range, max. Solid core 05(07) -U Stranded 07 -R Flexible 05(07) -K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor cross-section Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material UL 94 flaability rating Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 6.5 DIN C 40 C 35 III III II Wemid () -0 Cu-Leg tinned 1.2 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SDIS 1.2X6.5X SDS 1.2X6.5X Crosshead screwdriver Test plug SDIK Z2 SDK Z2 S 2.0 MC Identification systems DEK 5 NEUTRL DEK 5/5 MC-10 NE WS Representative deratings curve.14
15 Clamping yoke screw connection - dimension LXXX 15.00/../90F LXXX 15.00/../90FL LXXX 15.00/../90FR with fixing flange and test point with fixing flange left and test point with fixing flange right and test point OMNIMTE ower " " + 30, " " + 30, " " 51, " 51, " 51, " " " 12, " 15, " " " 12, " 15, " Ø 1,6 + 0, " " 15, " " Ø 5,5 + 0, " 3,8 0.15" Ø 1,6 + 0, " Ø 5,5 + 0, " 3,8 0.15" Ø 1,6 + 0,1 12, " 3,8 Ø 5,5 + 0,1 0.15" 0.217" " dditional deratings curves.15
16 OMNIMTE ower.16
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
PCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
SL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
Unimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
NEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
Female socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
Datasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
Data sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
Viking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
Data sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
Data sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Data sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
Terminal blocks with clamping yoke and screw connection system
Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with
Uninterruptible power supplies (UPS)
Contents Overview.2 UPS control unit.4 attery modules.6 uffer modules.8 1460790000 2014/2015.1 Overview Uninterruptible power supplies Weidmüller s uninterruptible power supplies reliably protect 24 V
MAKING MODERN LIVING POSSIBLE. Technical brochure. Minicontactors CI 5-
MKING MODERN LIVING POSSIBLE Technical brochure Minicontactors CI 5- www.danfoss.com 2 IC.PD.C10.F3.02-520B4167 Danfoss /S, C-SMC, mr, 07-2010 Contents Page Minicontactor CI 5- Introduction...............................................................................4
Data Sheet PCB Products
ata Sheet CB roducts LSF-SMT = CB terminal block for lead-free soldering processes with innovative connection technology: "ush In". b The "ush In" direct-connection terminal connector system ensures short
DBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
Phone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
Manual Motor Starters. Meta-MEC
Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters
Thermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
Terminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
Clearwater Tech - Phone: Fax: Web: -
Feed-through terminal Disconnect-test terminal KZ 1.5 Feed-through terminal 1.5 KZ 2.5 Feed-through terminal 2.5 /Length/height with TS35x7.5 / 5.1 x 24.8 x 25 24 / 2.5 0.21...2.5 5.1 x 25.5 x 26.5 32
Tools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series - B1
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series B Ex9BE3C0 Ex9BHC6 www.noarkus.com NORK Ex9 Series B NORK Miniature Circuit Breakers offer these advantages: highperformance, small size, exemplary
RX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Fuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation
SCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
Industrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
Manual motor starter magnetic only MO325
Data sheet Manual motor starter magnetic only MO325 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF
Fuse switch disconnectors
SWITCHGEAR RBK Fuse switch disconnectors intended for distribution of electricity and protection of electrical equipment against short-circuits and overloads, with industrial fuse links ENERGY SAFELY SWITCHED
TEST REPORT IEC Low-voltage switchgear and control gear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors
r Test Report issued under the responsibility of: TEST REORT Low-voltage switchgear and control gear art 7-4: Ancillary equipment CB terminal blocks for copper s Report Number.... : 2169331.75 Date of
, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
3RT14 Contactors with 3 Main Contacts
3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
General Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
Electronic Circuit Breaker ESS20
Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode
General purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
SCREW-TYPE DISTRIBUTION BLOCKS
CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power
V REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
Manual Motor Protectors
88 Manual Motor Protectors 51 30 UP TO IMM16 Frame IMM32 Frame IMM65 Frame E468295 E468295 High interrupt capacity up to 100k (with optional current limiter) Din rail mounting Lockable handle (OFF position)
44 SERIES. PCB/Plug-in relays from 6 to 10 A
44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)
S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
TX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Datasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
LED light engine / OLED LED compact. Umodule SLE G4 FASHION EXC
w LED light engine / OLED Umodule SLE G4 FASHION EXC umodule SLE Product description Optimized light spectrum for perfect fashion presentation Housing with Snap-On feature for easy reflector mounting LED-solution
Phase + Neutral, neutral on right side
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34
60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
42.4. Terminal Blocks, Fuse Blocks and Fuse Holders. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Terminal Blocks, Contents Description C383 Series Disconnect Fuse Holders...... C350 Series Fuse Blocks and W Series Fuse Holders.................. Page V7-T-129 V7-T-131 Overview Product Description
Han ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
DX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
PHASED OUT. LED light engine / OLED LED compact. Module SLE G5 ART EXC Modules SLE EXCITE
w LED light engine / OLED Product description Highest light quality in the market with full spectrum technology Application: Shop, Art & Culture Housing with Snap-On feature for easy reflector mounting
1489-M Circuit Breakers
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Terminal design helps prevent wiring misses Scratch- and solventresistant printing Suitable
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
Electronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
xxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads
22 Series - Modular contactors 25-40 - 63 22 SERIES Features 22.32.0.xxx.1xx0 22.32.0.xxx.4xx0 25 modular contactor - 2 pole 17.5 mm wide NO contact gap 3 mm, double break Continuous duty for the coil
Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
Power Supplies. Series FLEX Power Supplies...P2 Technical Information & Dimensions (Online)...P5. ADEL Power Supplies
ower Supplies Series...2 Technical Information & Dimensions (Online)...5 ADEL ower Supplies 1 Flexible Switching ower Supplies Sprecher + Schuh is proud to bring you a Flexible ower Supply from the best
ZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
PRODUCT INFORMATION. UNITRONIC LiYCY. Benefits Overall shield minimises electrical interference Versatile application possibilities
Shielded data cable with colour code according to DIN 47100 - shielded PVC data cable with colour code DIN 47100 for use in machinery and apparatus construction and in measurement, control and regulation
DATASHEET - ZB Delivery program. Overload relay, 50-65A, 1N/O+1N/C. Catalog No Eaton Catalog No. XTOB065DC1 EL-Nummer
DATASHEET - ZB65-65 Delivery program Overload relay, 50-65A, 1N/O+1N/C Part no. ZB65-65 Catalog No. 278460 Eaton Catalog No. XTOB065DC1 EL-Nummer 0004131855 (Norway) Product range Overload relay ZB up
USA Canada On the Internet: Toll Free wieland Product Range Electrical Connections
0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals
B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
Technical Information
Miniature Technical Information -09-12 Rated Insulation Voltage U i to IEC947-1 [V] 690V UL/CS [V] 600V Rated Impulse Voltage Withstand U imp [kv] 6 Rated Voltage Ue-Main Contacts C 50/60Hz [V] 230, 240,
RM 10 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 257 Matching handle B63399 257 Adjusting screw B65679 257 Core B65813 252 Clamps B65814 256 Insulating
General notes. Operating conditions
1 General notes Wöhner busbar systems and components are the result of expert development based on many years of experience. They have been exhaustively tested and hold many approvals. The correct selection
Solid State Relays G3RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. SSR and Socket Combinations
Solid State Relays G3RV Slimmest OMRON plug-in SSR with maximum width 6.2 mm Long electrical life and high speed switching Large plug-in terminals for reliable connection G3RV-D (DC load) models can manage
I r A short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting.
DATASHEET - ZB12-2,4 Delivery program Overload relay, 1.6-2.4 A, 1N/O+1N/C Part no. ZB12-2,4 Catalog No. 278437 Eaton Catalog No. XTOB2P4BC1 EL-Nummer 0004131832 (Norway) Product range Overload relay ZB
Emergency lighting units EM converterled
EM converter EM converter BASIC icd 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 54 V SEV for
RM 6 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 220 Matching handle B63399 220 Adjusting screw B65659 220 Core B65807 212 Clamps B65808 217 Insulating
Series KTU7 UL489 Molded Case Circuit Breakers
Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed
DATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
Approved Standards. Ordering Information. Thermal Overload Relay J7TKN. Model Number Legend. Thermal Overload Relay. Accessories
Thermal Overload Relay J7TKN ) Thermal Overload Relay Direct and separate mounting Single phasing sensivity according to IEC 60947-4-1 Finger proof (BGV A2) Accessories Set for single mounting Approved