Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
|
|
- Gavin Earl Cooper
- 6 years ago
- Views:
Transcription
1 Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and ease of terminal installation are desired. The WMF 2.5 series is offered in configuration types including fuse, disconnect and feed-through with pluggable connectors. The WMF 2.5 terminals are 5 wide, providing a 20% space savings when compared to typical fuse terminals at 6-8. pplications DCS marshalling cabinet field wiring Marshalling terminations that use FT interface modules via BLZ pluggable connectors Limited space applications that require multiple shield termination points Benefits 20% space savings with 5 width Ease of installation via the BLZ pluggable connector (cable harnessing) Unique fuse holder design simplifies the replacement or installation of fuses Improved flexibility with unique 3-channel jumpering and integrated shielding
2 WMF terminals Weidmuller Multi-Functional The efficient and extremely flexible solution for the routing and distribution of signals In power generation control systems, incoming signals from field devices are often connected with terminal blocks located in DCS marshalling cabi nets. Terminal blocks are used in place of, or along with, other termi nation techno logies such as remote I/O modules and Fieldbus. Terminal blocks provide a robust, simple and clean way to con nect and arrange signal wires. Traditional DCS Cabinet Marshalling 3 Blocks 18 WMF 2.5 Series DCS Cabinet Marshalling 2 Blocks 10 Pre-assembled cables Weidmuller s new WMF (Weidmuller Multi-Function) line of terminal blocks is specially designed to improve the way in which DCS marshalling, or signal routing and distribution is performed. This new line provides dramatic cabinet space savings, significant wiring time savings, and additional flexibility through the addition of three cross connection channels. The WMF terminal blocks also feature an integrated shield or ground con nection in both the feed through and fuse block terminals, eliminating the need for a separate ground block. The new fuse block design also features disconnect functionality. t only 5 in width, the WMF blocks are 20% to 25% smaller than traditional feed-through and fuse blocks. Marshalling / Routing wiring between internal side of terminal blocks and I/O module or FT I/O module or Field Terminal ssemblies (FT) DIN-rail Wire ducts 55% Space Savings Terminal Blocks Marshalling Cabinet 96 Signal Loops / 192 Connections
3 Multi-functional terminals WMF 2.5 WMF 2.5 PE /Length/height with TS35x7.5 max. current / max. cond. cross-section / 2 Max. clamping range 2 ccessories P WMF2.5; Pitch = 1.5 ZQ 2.5N (²) k/- ² Blue Wemid C/DC, with LED C/DC, with LED C/DC, with LED C/DC, with LED Component plug (max. 250 ) Holder for cartridge fuse, 5 x C/DC, without LED C/DC, red LED C/DC, red LED 5.08 x 88 x / UL rated current = 26 (factory wiring only) 20 (factory and field wiring) UL rated voltage = 600 at User Group B, C, D WMF WMF 2.5 BL x 88 x / UL rated current = 26 (factory wiring only) 20 (factory and field wiring) UL rated voltage = 600 at User Group B, C, D WMF 2.5 PE WMF 2.5 PE BL
4 Multi-functional terminals WMF 2.5 DI WMF 2.5 DI PE /Length/height with TS35x7.5 max. current / max. cond. cross-section / 2 Max. clamping range 2 (²) k/- ² 5.08 x 88 x / UL rated voltages at User Group B, C, D 5.08 x 88 x / UL rated voltages at User Group B, C, D Blue Wemid WMF 2.5 DI WMF 2.5 DI BL WMF 2.5 DI PE WMF 2.5 DI PE BL ccessories P WMF2.5; Pitch = 1.5 ZQ 2.5N Test Socket C/DC, with LED C/DC, with LED C/DC, with LED C/DC, with LED WMF 2.5 DI PE Stb Component plug (max. 250 ) Holder for cartridge fuse, 5 x C/DC, without LED C/DC, red LED C/DC, red LED Test plug Red, P BEST BEST/DRBR BEST/D BEST BEST/DRBR BEST/D PS
5 Multi-functional terminals WMF 2.5 FU WMF 2.5 FU PE /Length/height with TS35x7.5 max. current / max. cond. cross-section / 2 Max. clamping range 2 (²) k/- ² 5.08 x 88 x / UL rated voltage = 600 at User Group B, C, D 5.08 x 88 x / UL rated voltage = 600 at User Group B, C, D Blue Wemid ccessories P WMF2.5; Pitch = 1.5 ZQ 2.5N C/DC, with LED C/DC, with LED C/DC, with LED C/DC, with LED WMF 2.5 FU SW WMF 2.5 FU SW WMF 2.5 FU SW WMF 2.5 FU SW WMF 2.5 FU SW LED versions with low leakage current < 0.5 m WMF 2.5 FU PE SW WMF 2.5 FU PE SW WMF 2.5 FU PE SW WMF 2.5 FU PE SW WMF 2.5 FU PE SW LED versions with low leakage current < 0.5 m Component plug (max. 250 ) Holder for cartridge fuse, 5 x C/DC, without LED C/DC, red LED C/DC, red LED Test plug 2.5 GE GE
6 Multi-functional terminals WMF 2.5 BLZ WMF 2.5 BLZ PE /Length/height with TS35x7.5 max. current / max. cond. cross-section / 2 Max. clamping range x 90 x / 4 BLZ x 90 x / 4 BLZ 5.08 (²) k/- ² UL rated current = 26 (factory wiring only) 20 (factory and field wiring) 15 (at BLZ plug) UL rated current = 26 (factory wiring only) 20 (factory and field wiring) 15 (at BLZ plug) without lever Dark beige WMF 2.5 BLZ WMF 2.5 BLZ PE ccessories P WMF2.5; Pitch = 1.5 ZQ 2.5N C/DC, with LED C/DC, with LED C/DC, with LED C/DC, with LED UL rated voltages / current: 300 at User Group B 150 / 15 at User Group D 300 / 10 at User Group D Component plug (max. 250 )) Holder for cartridge fuse, 5 x C/DC, without LED C/DC, red LED C/DC, red LED Test plug Red, P WD cover for unused plug positions WD WMF WD WMF
7 WMF 2.5 DI BLZ WMF 2.5 DI BLZ PE WMF 2.5 FU BLZ x 90 x / x 90 x / x 90 x / 4 BLZ UL rated voltages / current: 300 at User Group B 150 / 15 at User Group D 300 / 10 at User Group D 15.5 at BLZ plug UL rated voltages / current: 300 at User Group B 150 / 15 at User Group D 300 / 10 at User Group D 15.5 at BLZ plug UL rated voltages / current: 300 at User Group B 150 / 15 at User Group D 300 / 10 at User Group D 9.5 at BLZ plug WMF 2.5 DI BLZ WMF 2.5 DI BLZ Stb WMF 2.5 DI BLZ BLK WMF 2.5 DI BLZ PE WMF 2.5 DI BLZ PE BLK (w/o lever) WMF 2.5 DI BLZ PE Stb WMF 2.5 FU BLZ SW WMF 2.5 FU BLZ SW WMF 2.5 FU BLZ SW WMF 2.5 FU BLZ SW WMF 2.5 FU BLZ SW UL rated current: 14 at BLZ plug UL rated current: 14 at BLZ plug LED versions with low leakage current < 0.5 m BEST BEST/DRBR BEST/D BEST BEST/DRBR BEST/D GE PS PS WD WMF WD WMF
8 L1 + P WMF 2.5 Terminal Series Multi-functional terminals WMF 2.5 FU BLZ PE SW BLZP 5.08/90 Can be mounted side-by-side without sacrificing any poles " " P L " /Length/height with TS35x7.5 max. current / max. cond. cross-section / 2 Max. clamping range 2 ccessories P WMF2.5; Pitch = 1.5 ZQ 2.5N (²) k/- ² without lever Dark beige C/DC, with LED C/DC, with LED C/DC, with LED C/DC, with LED Component plug (max. 250 )) Holder for cartridge fuse, 5 x C/DC, without LED C/DC, red LED C/DC, red LED Test plug WD cover for unused plug positions Red, P 5.08 x 90 x / UL rated voltages / current: 300 at User Group B 150 / 15 at User Group D 300 / 10 at User Group D 9.5 at BLZ plug BLZ 5.08 WMF 2.5 FU BLZ PE SW WMF 2.5 FU BLZ PE SW WMF 2.5 FU BLZ PE SW WMF 2.5 FU BLZ PE SW WMF 2.5 FU BLZ PE SW LED versions with low leakage current < 0.5 m 2.5 GE WD WMF Pitch 5.08 Color of plastic Orange Black Poles L1 (inch) Qty. Part No. Part No (0.200) (0.600) (1.400) (2.200) (3.000) BLZP 5.08/90F With screw flange L1 + P L1 + P " " Pitch 5.08 Color of plastic Orange Black Poles L1 (inch) Qty. Part No. Part No (0.200) (0.600) (1.400) (2.200) (3.000) to IEC / IEC Clamping range, max. ² Solid H05(07) -U ² Stranded H07 -R ² Flexible H05(07) -K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length 7 blade 0.6 x 3.5 according to norm DIN 5264 Tightening torque range Nm at ambient temperature 20 C 40 C Overvoltage category III III II Pollution severity Rated impulse voltage k a UL 1059 rated data B C D Nominal voltage WG conductor r CS C22.2 rated data B C D Nominal voltage WG conductor Material data Type of insulating material PBT Flaability class acc. UL94-0 Contact base material Copper alloy Material of contact surface tinned P L1 L1 + P " "
NEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationClearwater Tech - Phone: Fax: Web: -
Feed-through terminal Disconnect-test terminal KZ 1.5 Feed-through terminal 1.5 KZ 2.5 Feed-through terminal 2.5 /Length/height with TS35x7.5 / 5.1 x 24.8 x 25 24 / 2.5 0.21...2.5 5.1 x 25.5 x 26.5 32
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationonlinecomponents.com Terminal Blocks Frequently Asked Questions Terminal Blocks
Terminal Blocks Terminal Blocks Frequently Asked Questions Why use terminal blocks to connect instrumentation devices to the control unit? Instrumentation is used throughout a process plant. Long distances
More informationOMNIMATE Power PCB terminals
Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension 6.35.6 dimension 10.16.8 dimension 12.70.11 dimension 15.00.12.1
More informationTerminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationFused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series
28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationFeed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
More informationExtra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
More informationContents. SAK-Series combination foot TS 35 + TS 32. SAK-Series combination foot TS 35 + TS 32 C.1
ontents / P.2 Stud terminals.6 Fuse terminals / P.7 Earth conductor isolating terminals.8.1 / P SK 2.5/EN 2.5 SK 4/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals
More informationDatasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart
More informationUSA Canada On the Internet: Toll Free wieland Product Range Electrical Connections
0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationSL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
More informationData sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
More informationClearwater D.94 Tech - Phone: Fax: Web: -
Modular design This mini-terminal family in tension clamp technology can be used to assemble individual blocks with 2- and 4-pole terminals. There are three different marking options for quick and clear
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More information44 SERIES. PCB/Plug-in relays from 6 to 10 A
44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)
More informationUnimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationHan ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationData sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationSystem pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
More informationTerminal blocks with clamping yoke and screw connection system
Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with
More informationMiniature Industrial relay 8-16 A
46 SЕRIES Miniature Industrial relay 8-16 utomation for blinds, grilles and shutters Elevators and lifts Shipyards Road / tunnel lighting Hoists and cranes Bottling plant Control panels Panels for electrical
More informationDatasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationGeneral purpose relays 7-10 A
55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches
More informationDatasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationDIN Track Terminal Blocks
DIN Track Terminal Blocks XW5 Series Push-in plus and screw technology for easy wiring Minimum width of 3.5 mm to help downsize control panels Connection for large conductors possible with the high-current
More informationDatasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
More informationData sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
More informationPower distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
More information60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
More informationHK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationZS4-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK6D00 Catalogue Page SNK6S00 ZS4-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationPrintview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
More information2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
More informationGeneral purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
More informationSave space.cut costs. Broaden your network. AccessNET
av Save space.cut costs. Broaden your network. AccessNET 23 Improve your competitiveness Networks are on the rise in almost every field of communication: cellular phone networks, third generation mobile
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More information42.4. Terminal Blocks, Fuse Blocks and Fuse Holders. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Terminal Blocks, Contents Description C383 Series Disconnect Fuse Holders...... C350 Series Fuse Blocks and W Series Fuse Holders.................. Page V7-T-129 V7-T-131 Overview Product Description
More informationSCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
More informationVarius SUMMARY OF MODELS OF FUSE-BASE AND FUSE HOLDERS. Type SPB S3PB SPF SP4.. SP50
SUMMARY OF MODELS OF FUSE-BASE AND FUSE HOLDERS Type SPB SPB SPF SP4.. SP50 Rated current I n 60 A / 0 A / 400 A 60 A / 0 A / 400 A 60 A / 0 A / 400 A / / 60 A Rated voltage AC/DC U n 690 V 690 V 690 V
More informationZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral
Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004
More informationMain catalog. SNK series Terminal blocks. Phone: Fax: Web: -
Main catalog SNK series Terminal blocks SNK series, terminal blocks, accessories, marking solutions Ranges and technologies presentation 2 1 PI-Spring terminal blocks 1 2 Screw clamp terminal blocks 49
More informationZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More information3RT14 Contactors with 3 Main Contacts
3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More informationDOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
More informationData Sheet PCB Products
ata Sheet CB roducts LSF-SMT = CB terminal block for lead-free soldering processes with innovative connection technology: "ush In". b The "ush In" direct-connection terminal connector system ensures short
More informationFemale socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
More informationIndex. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
More informationContent Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1
Content Modular terminals for high-temperature applications TS 32 / Ceramic.2 -.3 Nuclear power terminal blocks Overview.4 -.5.6 -.10 Terminal Blocks.1 Modular terminals for high-temperature applications
More informationApprovals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
More informationLINOCUR Size D02 63A 230VAC/440VAC
IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuse-link, equiped with significant safety characeristics and sophisticated
More informationZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationZP2.5-4P Spring Terminal Block Feed-through
Technical Datasheet 1SNK162005D0201.indd 08/06/11 ZP2.5-4P Spring Terminal Block Feed-through Catalogue Page Thanks to the ZP2.5-4P, PI-Spring terminal block: Save time and connect directly rigid and flexible
More informationMulti-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationCONTA-CONNECT. Disconnect terminals TRK/STK 2/TK
CONTACONNECT s TRK/STK 2/TK s are commonly used within measurement and control systems. They provide assistance when troubleshooting in electrical facilities, when commissioning new facilities and when
More informationFuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationAll round protection guaranteed
s With SLR ll round protection guaranteed Betagard MCB 5SL Inspiring Safety nswers for infrastructure. Overview s a culture Siemens has always endeavoured to introduce innovative products worldwide. The
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationSlim P.C.B. Relays (EMR or SSR) A
34 SЕRIES Slim P.C.B. Relays (EMR or SSR) 0.1-0.2-2 - 6 Bottling plant Packaging machines Labelling machines Road / tunnel lighting Burners, boilers and furnaces Timers and lighting controls Electronic
More informationManual motor starter magnetic only MO325
Data sheet Manual motor starter magnetic only MO325 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF
More informationZK2.5-SF-R PI-Spring Terminal Blocks For 5x20 fuses - with blown fuse indicator
Technical Datasheet SNK605D00 Catalogue Page SNK60S00 ZK.5-SF-R PI-Spring Terminal Blocks For 5x0 fuses - with blown fuse indicator - Protect your circuits with 5x0 fuse terminal blocks compliant with
More informationZP2.5-PE Spring Terminal Block Ground
Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail
More informationPhone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
More informationVDE tested single cores according to EN (H05Z-K & H07Z-K) for more demanding requirements
VDE tested single cores according to EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements ÖLFLEX HEAT 125 C MC - halogen free single core with GL certificate, special fire performance, IEC 60332-3,
More informationZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator
Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse
More informationDouble-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
More informationRockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
More informationZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet 1SNK166D001 Catalogue Page ZS-SF1-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied with
More informationMULTIVERT 1000A Main Incomer, 690VAC
IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors. They are designed
More informationMS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
More informationZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator
Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse
More informationHan Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
More informationWith magnetic fixing With ON/OFF switch
7L Series - LED lamps 7L LED lamps for the cabinet Energy-saving (LED technology) Power consumption 5 W Luminous flux equivalent to a 95 W incandescent bulb Magnetic, screw or clip fixing With ON/OFF switch
More informationW-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution
2 -series -series -series -series sets standards! hen it comes to functional perfection even in details, eidmüller s -series defines the market standards for many years now! The -series comprises producte
More informationZS4 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK60D0 Catalogue Page SNK60S0 ZS4 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 4 mm² (CB certified) AWG in just. mm 0. in spacing. SNK60F00 SNK0000F0000
More informationZS4-SF Screw Clamp Terminal Blocks For 5 x 20 fuses
Technical Datasheet SNK60D00 Catalogue Page ZS-SF Screw Clamp Terminal Blocks For x 0 fuses - Protect your circuits with x0 fuse terminal blocks compliant with IEC 607-7-3 standard (fuse not supplied with
More informationChapter 06 Accessories ACCESSORIES
ccessories CCESSORIES 57 Powerful and precise Input, 3-pole Output is 3-pole + N Use in IT networks without neutral line For reducing the measurement voltage for the UMG measurement input Use in IT networks
More informationSCREW-TYPE DISTRIBUTION BLOCKS
CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power
More information