60 Series - General purpose relays 6-10 A. Features SERIES

Transcription

1 60 Series - General purpose relays SERIES Features Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket combinations) Contact material options Lockable test button with mechanical flag indicator (preferred version) 90 series sockets Coil EMC suppression Timer accessories 86 series European Patent 2 pole, 10 power contacts 8 pin plug-in 3 pole, 10 power contacts 11 pin plug-in FOR UL RTINGS SEE: General technical information page V Contact specification Contact configuration Rated current/maximum peak current Rated voltage/maximum switching voltage V C Rated load C1 V Rated load C15 (230 V C) V Single phase motor rating (230 V C) kw Breaking capacity DC1: 30/110/220 V Minimum switching load mw (V/m) Standard contact material Coil specification Nominal voltage (U N ) V C (50/60 Hz) V DC Rated power C/DC V (50 Hz)/W Operating range C DC Holding voltage C/DC Must drop-out voltage C/DC Mechanical life C/DC cycles Electrical life at rated load C1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 µs) kv between open contacts V C mbient temperature range C Environmental protection pprovals (according to type) 2 CO (DPDT) 3 CO (3PDT) 10/20 10/20 250/ /400 2,500 2, /0.4/ /0.4/ (10/5) 500 (10/5) gni gni / / U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N / / /4 11/ ,000 1, RT I RT I 1

2 60 SERIE S Features 60 Series - General purpose relays Plug-in mount - 6 Bifurcated contacts for low level switching 2 & 3 pole changeover contacts Cadmium Free contacts (Gold plated Silver Nickel) C coils & DC coils Lockable test button with mechanical flag indicator (preferred version) 90 series sockets Coil EMC suppression Timer accessories 86 series European Patent 2 pole, 6 bifurcated contacts 8 pin plug-in 3 pole, 6 bifurcated contacts 11 pin plug-in FOR UL RTINGS SEE: General technical information page V Contact specification Contact configuration Rated current/maximum peak current Rated voltage/maximum switching voltage V C Rated load C1 V Rated load C15 (230 V C) V Single phase motor rating (230 V C) kw Breaking capacity DC1: 30/110/220 V Minimum switching load mw (V/m) Standard contact material Coil specification Nominal voltage (U N ) V C (50/60 Hz) V DC Rated power C/DC V (50 Hz)/W Operating range C DC Holding voltage C/DC Must drop-out voltage C/DC Mechanical life C/DC cycles Electrical life at rated load C1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 µs) kv between open contacts V C mbient temperature range C Environmental protection pprovals (according to type) 2 2 CO (DPDT) 3 CO (3PDT) 6/10 6/10 250/ /400 1,500 1, /0.3/0.12 6/0.3/ (5/5) 50 (5/5) gni + u bifurcated contacts gni + u bifurcated contacts / / U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N / / /4 11/ ,000 1, RT I RT I

3 60 Series - General purpose relays SERIES Features Flange mount - General purpose relay 10 Faston 187, 4.8x0.8 mm 2 & 3 pole changeover contacts C coils & DC coils Cadmium Free contacts Contacts material options 2 pole, 10 power contacts Flange mount/faston pole, 10 power contacts Flange mount/faston 187 FOR UL RTINGS SEE: General technical information page V Contact specification Contact configuration Rated current/maximum peak current Rated voltage/maximum switching voltage V C Rated load C1 V Rated load C15 (230 V C) V Single phase motor rating (230 V C) kw Breaking capacity DC1: 30/110/220 V Minimum switching load mw (V/m) Standard contact material Coil specification Nominal voltage (U N ) V C (50/60 Hz) V DC Rated power C/DC V (50 Hz)/W Operating range C DC Holding voltage C/DC Must drop-out voltage C/DC Mechanical life C/DC cycles Electrical life at rated load C1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 µs) kv between open contacts V C mbient temperature range C Environmental protection pprovals (according to type) 2 CO (DPDT) 3 CO (3PDT) 10/20 10/20 250/ /400 2,500 2, /0.4/ /0.4/ (10/5) 500 (10/5) gni gni / / U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N / / /4 11/ ,000 1, RT I RT I 3

4 60 SERIE S 60 Series - General purpose relays 6-10 Ordering information Example: 60 series plug-in relay, 3 CO (3PDT), 12 V DC coil, test button and mechanical indicator. 6 0 B C D Series Type 1 = 8/11 pin plug-in 6 = Faston 187 (4.8x0.8 mm) with flange mount No. of poles 2 = 2 pole 3 = 3 pole Coil version 4 = Current sensing (60.12/13 only) 8 = C (50/60 Hz) 9 = DC Coil voltage See coil specifications : Contact material 0 = Standard 5 = gni + u B: Contact circuit 0 = CO (npdt) 2 = Bifurcated contacts 60.12/13-6 only Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Coil version B C D 60.12/13 C C / C C / DC DC / DC DC / current sensing /63 C-DC D: Special versions 0 = Standard C: Options 0 = None 2 = Mechanical indicator 3 = LED (C) 4 = Lockable test button + mechanical indicator 5* = Lockable test button + LED (C) 54* = Lockable test button + LED (C) + mechanical indicator 6* = LED + diode (DC, polarity positive to pin 2) 7* = Lockable test button + LED + diode (DC, polarity positive to pin 2) 74* = Lockable test button + LED + diode (DC, polarity positive to pin 2) + mechanical indicator * Options not available for 220 V DC and 400 V C versions. Descriptions: Options and Special versions C: Option 3, 5, 54 LED (C) C: Option 6, 7, 74 LED + diode (DC, polarity positive to pin 2) E U R O P E N P T E N T Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074) The dual-purpose Finder test button can be used in two ways: Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. E U R O P E N

5 60 Series - General purpose relays 6-10 Insulation according to EN pole 3 pole Nominal voltage of supply system V C 230/ /400 Rated insulation voltage V C Pollution degree Insulation between coil and contact set Type of insulation Basic Basic Overvoltage category III III Rated impulse voltage kv (1.2/50 µs) V C 2,000 2,000 Insulation between adjacent contacts Type of insulation Basic Basic Overvoltage category III III Rated impulse voltage kv (1.2/50 µs) V C 2,000 2,000 Insulation between open contacts Type of disconnection Micro-disconnection Micro-disconnection V C/kV (1.2/50 µs) 1,000/1.5 1,000/1.5 Conducted disturbance immunity Burst (5...50)ns, 5 khz, on 1-2 EN level 4 (4 kv) Surge (1.2/50 µs) on 1-2 (differential mode) EN level 4 (4 kv) Other data Bounce time: NO/NC ms 1/4 Vibration resistance (5 55)Hz: NO/NC g 22/22 Shock resistance g 20 Power lost to the environment without contact current W with rated current W 2.7 (60.12, 60.62) 3.4 (60.13, 60.63) 60 SERIES Contact specification F 60 - Electrical life (C) v contact current H 60 - Maximum DC1 breaking capacity Cycles Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 DC breaking current () contacts in series DC voltage (V) Coil specifications DC coil data Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N V V V Ω m , , , , , When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. C coil data Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N (50Hz) V V V Ω m , , , , ,

6 60 SERIE S 60 Series - General purpose relays 6-10 Coil specifications R 60 - DC coil operating range v ambient temperature R 60 - C coil operating range v ambient temperature 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Current sensing version L N Typical application with current sensing relays. n open circuit filiment of lamp L1 is detected by the current sensing relay coil (K1) which causes the back-up safety lamp L2 to be energised, and indication of failure at the control panel via lamp S1. Example: navigation light. L1 = Light L2 = Safety light S1= Control light K1 = Relay Current sensing DC coil data Coil code I min () I N () I max () R (Ω) Current sensing C coil data Coil code I min () I N () I max () R (Ω) Other types of current sensing relays are available on request. ccessories Sheet of marker tags for relay types and 60.13, plastic, 72 tags, 6x12 mm

7 90 Series - Socket overview for 60 series relays 60 SERIES See page 8 Module Socket Relay Description Mounting ccessories Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC Double 1 terminal (EN 60715) mount suppression modules - Jumper link - Timer modules - Metal retaining clip Module Socket Relay Description Mounting ccessories Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC (EN 60715) mount suppression modules - Metal retaining clip See page Module Socket Relay Description Mounting ccessories Screw terminal (Box clamp) socket Panel or 35 mm rail - Metal retaining clip (EN 60715) mount See page 10 Module Socket Relay Description Mounting ccessories Screw terminal (Box clamp) socket Panel or 35 mm rail - Metal retaining clip (EN 60715) mount See page 10 Module Socket Relay Description Mounting ccessories Screw terminal (Plate clamp) socket Panel or 35 mm rail - Metal retaining clip (EN 60715) mount See page See page Module Socket Relay Description Mounting ccessories Flange mount solder socket M3 screw fixing See page 12 Module Socket Relay Description Mounting ccessories PCB socket PCB

8 60 SERIE S 90 Series - Sockets and accessories for 60 series relays pprovals Certain relay/socket combinations Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount Blue Black Blue Black ccessories Metal retaining clip way jumper link Identification tag Modules (see table below) Timer modules (see table below) 86.00, V 2 kv C Protection category IP 20 mbient temperature C Screw torque Nm 0.6 Wire strip length mm 10 Max. wire size for and sockets solid wire stranded wire mm 2 1x6 / 2x2.5 1x4 / 2x2.5 WG 1x10 / 2x14 1x12 / 2x14 E U R O P E N P T E N T E U R O P E N 6-way jumper link for and sockets (blue) (black) V pprovals pprovals DC Modules with non-standard polarity (+2) on request series timer modules Multi-voltage: (12 240)V C/DC; Multi-functions: I, DI, SW, BE, CE, DE, EE, FE; (0.05 s 100 h) (12 24)V C/DC; Bi-function: I, DI; (0.05 s 100 h) ( )V C; Bi-function: I, DI; (0.05s 100h) ( )V C; Bi-function: I, DI; (0.05 s 100 h) pprovals coil indication and EMC suppression modules for and sockets Diode (+1, standard polarity) ( )V DC LED (6...24)V DC/C LED ( )V DC/C LED ( )V DC/C LED + Diode (+1, standard polarity) (6...24)V DC LED + Diode (+1, standard polarity) ( )V DC LED + Diode (+1, standard polarity) ( )V DC LED + Varistor (6...24)V DC/C LED + Varistor ( )V DC/C LED + Varistor ( )V DC/C RC circuit (6...24)V DC/C RC circuit ( )V DC/C RC circuit ( )V DC/C Residual current by-pass ( )V C

9 90 Series - Sockets and accessories for 60 series relays 60 SERIES pprovals Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount Blue Black Blue Black ccessories Metal retaining clip (supplied with socket - packaging code SM) Modules (see table below) V 2 kv C Protection category IP 20 mbient temperature C Screw torque Nm 0.5 Wire strip length mm 10 Max. wire size for and sockets solid wire stranded wire mm 2 1x6 / 2x2.5 1x6 / 2x2.5 WG 1x10 / 2x14 1x10 / 2x pprovals *Modules in Black housing are available on request. Green LED is standard. Red LED available on request coil indication and EMC suppression modules for and sockets See technical data page 215/216 Blue* Diode (+1, standard polarity) ( )V DC Diode (+2, non-standard polarity) ( )V DC LED (6...24)V DC/C LED ( )V DC/C LED ( )V DC/C LED + Diode (+1, standard polarity) (6...24)V DC LED + Diode (+1, standard polarity) ( )V DC LED + Diode (+1, standard polarity) ( )V DC LED + Diode (+2, non-standard polarity) (6...24)V DC LED + Diode (+2, non-standard polarity) ( )V DC LED + Diode (+2, non-standard polarity) ( )V DC LED + Varistor (6...24)V DC/C LED + Varistor ( )V DC/C LED + Varistor ( )V DC/C RC circuit (6...24)V DC/C RC circuit ( )V DC/C RC circuit ( )V DC/C Residual current by-pass ( )V C

10 60 SERIE S 90 Series - Sockets and accessories for 60 series relays pprovals Screw terminal (Box clamp) socket panel or 35 mm rail (EN 60715) mount Blue Black Blue Black ccessories Metal retaining clip V 2 kv C Protection category IP 20 mbient temperature C Screw torque Nm 0.8 Max. wire size for and sockets solid wire stranded wire mm 2 1x6 / 2x4 1x6 / 2x4 WG 1x10 / 2x14 1x10 / 2x pprovals Screw (Box clamp) terminal socket panel or 35 mm rail (EN 60715) mount Blue Blue ccessories Metal retaining clip (supplied with socket - packaging code SM) V 2 kv C Protection category IP 20 mbient temperature C Screw torque Nm 0.5 Wire strip length mm 7 Max wire size for and sockets solid wire stranded wire mm 2 1x6 / 2x2.5 1x6 / 2x2.5 WG 1x10 / 2x14 1x10 / 2x

11 90 Series - Sockets and accessories for 60 series relays 60 SERIES pprovals Screw terminal (Plate clamp) socket panel or 35 mm rail (EN 60715) mount Blue Black Blue Black ccessories Metal retaining clip (supplied with socket - packaging code SM) V 2 kv C Protection category IP 20 mbient temperature C Screw torque Nm 0.8 Wire strip length mm 10 Max. wire size for and sockets solid wire stranded wire mm 2 1x4 / 2x2.5 1x4 / 2x2.5 WG 1x12 / 2x14 1x12 / 2x pprovals Flange mount solder socket mount with M3 screw (black) (black) V 2 kv C mbient temperature C

12 60 SERIE S 90 Series - Sockets and accessories for 60 series relays pprovals PCB socket Blue (Ø 20.5 mm) (Ø 22 mm) Blue (Ø 17.5 mm) (Ø 19 mm) V 2 kv C mbient temperature C Packaging code How to code and identify retaining clip and packaging options for sockets. Example: S M Standard packaging SM Metal retaining clip Without retaining clip 12