Terminal blocks with clamping yoke and screw connection system
|
|
- Georgina French
- 6 years ago
- Views:
Transcription
1 Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with screw clamp connection technology, has set the standard. The W-Series offers solutions for conductor cross-sections between 0.05 and 300. The cross-connectors are pluggable (ZQV) or screwable (WQV) in a terminal block. The combination of benefits is unequalled and puts the W-Series in a leading position on the market. Thanks to the patented design of Weidmüller s W-Series screw connection technology, it is possible for two conductors of the same cross-section to be connected in one and the same clamping point without difficulty. esigns The W-Series is offered in standard and compact designs. The compact design is impressive with its small size for the design cross-sectional capacity. Connections proven a million times The terminal unit consists of hardened steel, for very high contact force. The busbar is made of copper, which gives a low voltage drop. The tin-plated surface ensures minimum contact resistances /2013
2 Overview W-Series Efficiency thanks to equal contours Uniform size of the terminal block bodies from 2.5 to 10 means fewer accessories, lowers the cost, offers logistical advantages and enables simple installation. Safe operation The terminal blocks are supplied with open clamping units, this enables quick assembly. In addition, the misplugging safeguard prevents conductors from being inserted incorrectly. Embossing on the clamping yoke and current bar engage so that even the smallest conductors are reliably contacted; large conductors and also 2 conductors are gripped in the middle /2013.3
3 WU 1.5/ZZ 1.5 WU 2.5/1.5/ZR 2.5 Identically contoured design of 2.5 to 10 with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. Twin connection Supplementary connection, right In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 5.1 x 60 x / x 60 x / ,5 mm 2 1,5 mm 2 1,5 mm 2 Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/ (C) 300 (C) (C) 10 (C) AWG AWG A1 / V-0 r u # i ~ a KEMA 98ATEX1685 U / Nm (M 2.5) 7 / 0.6 x 3.5 mm / (C) 300 (C) (C) 20 (C) AWG AWG A3, A1 / V-0 r u # i ~ x a KEMA 98ATEX1685 U / / / Nm (M 2.5) the max. current of the terminal (23 A) when using the WQV crossconnector! 2.5 wires with wire ferrules including the plastic collar only clampable with diameter-optimised collar (Order no , pack of 500). Ordering data Version WU 1.5/ZZ WU 1.5/ZZ BL WU 2.5/1.5/ZR WU 2.5/1.5/ZR BL The rated voltage is 400 V when using ZQV cross-connection, additional connection (right 1.5 ). Accessories Pluggable cross-connection Screwable cross-connection End plate / Partition plate End bracket Testing / Checking Cover 10-pole 20-/2 10-pole Standard With assembly peg With lightning flash symbol Blank, white Blank, yellow ZQV 2.5N/2 GE 24 A ZQV 2.5N/3 GE 24 A ZQV 2.5N/4 GE 24 A ZQV 2.5N/10 GE 24 A ZQV 2.5N/20 GE 24 A WQV 2.5/2 32 A WQV 2.5/3 32 A WQV 2.5/4 32 A WQV 2.5/10 32 A WAP mm WAP BL 1.5 mm WTA 2 WU mm WTA 2/ZA WU mm WA 4 GE BE 4.5 mm WA 4 WS 4.5 mm ZQV 2.5N/2 GE 24 A ZQV 2.5N/3 GE 24 A ZQV 2.5N/4 GE 24 A ZQV 2.5N/10 GE 24 A ZQV 2.5N/20 GE 24 A WQV 2.5/2 32 A WQV 2.5/3 32 A WQV 2.5/4 32 A WQV 2.5/10 32 A WAP mm WAP BL 1.5 mm WTA 2 WU mm WTA 2/ZA WU mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/5 / WS 12/5 EK 5/5 / WS 12/5 Use a 2.5 / 1 conductor when using the WQB /2013
4 WU WU 2.5N 2.5 WU 2.5N/ZQV 2.5 With screwable cross-connection With pluggable cross-connection 5.1 x 60 x / x 44 x / x 44 x / (C) 600 (C) (C) 20 (C) AWG AWG A3 / V-0? r u # i ~ x a KEMA 98ATEX1683 U / / Nm (M 2.5) () 300 () () 10 () AWG AWG kv / 3 A3 / V-0 r u # i ~ x a KEMA 98ATEX1683 U / / Nm (M 2.5) IEC UL CSA (C) 300 (C) (C) 25 (C) 2.5 AWG AWG kv / 3 A3 / V-0 r u i a / / Nm (M 2.5) 2.5 wires with wire ferrules including the plastic collar only clampable with diameter-optimised collar (Order no , pack of 500). 2.5 wires with wire ferrules including the plastic collar only clampable with diameter-optimised collar (Order no , pack of 500). 2.5 wires with wire ferrules including the plastic collar only clampable with diameter-optimised collar (Order no , pack of 500). WU WU 2.5 BL Rated voltage is 400 V when using cross-connection ZQV Refer to the W-Series Accessories section for colour versions. WU 2.5N WU 2.5N BL Colour variants listed under the W-Series accessories section, Specific functions. WU 2.5N ZQV WU 2.5N ZQV BL Rated voltage is 400 V when using the ZQV cross-connector. ZQV 2.5N/2 GE 24 A ZQV 2.5N/3 GE 24 A ZQV 2.5N/4 GE 24 A ZQV 2.5N/10 GE 24 A ZQV 2.5N/20 GE 24 A ZQV 2.5N/2 GE 24 A ZQV 2.5N/3 GE 24 A ZQV 2.5N/4 GE 24 A ZQV 2.5N/10 GE 24 A ZQV 2.5N/20 GE 24 A WQV 2.5/2 32 A WQV 2.5/3 32 A WQV 2.5/4 32 A WQV 2.5/10 32 A WAP mm WAP BL 1.5 mm WQV 2.5/2 32 A WQV 2.5/3 32 A WQV 2.5/4 32 A WQV 2.5/10 32 A WAP WU2.5N/4N 1.5 mm WAP WU2.5N/4N BL 1.5 mm WAP WU2.5N/4N 1.5 mm WAP WU2.5N/4N BL 1.5 mm EW mm EW mm WTA 2 WU mm WTA 2/ZA WU mm WTA 1 WU1.5 5 mm WTA 1/ZA WU1.5 5 mm WTA 1 WU1.5 5 mm WTA 1/ZA WU1.5 5 mm WA 5 MC NE WS 5 mm WA 5 MC NE GE 5 mm WA 4 GE BE 4.5 mm WA 4 WS 4.5 mm WA 4 GE BE 4.5 mm WA 4 WS 4.5 mm EK 5/5 / WS 12/5 Ensure 2.5 max. when using the WQB. Only 400 V when using the shielding rail LS 2, EK 5/5 / WS 12/5 EK 5/5 / WS 12/ /2013.5
5 WU 2.5N/600 UL 2.5 WU 4 4 Identically contoured design of 2.5 to 10 with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. 600V UL/CSA In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 5.1 x 44 x / x 60 x / Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/- IEC UL CSA (C) 600 (C) (C) 20 (C) 2.5 AWG AWG A3 / V-0 r a / / Nm (M 2.5) (C) 600 (C) (C) 35 (C) 28 4 AWG AWG A4 / V-0? r u # i ~ x a KEMA 98ATEX1683 U / / Nm (M 3) wires with wire ferrules including the plastic collar only clampable with diameter-optimised collar (Order no , pack of 500). Rated voltage is 400 V when using the ZQV cross-connector. max. current of terminal (41 A) when using WQV! Ordering data Version WU 2.5N/600UL WU WU 4 BL V C rated voltage tested. Refer to the W-Series Accessories section for colour versions. Accessories Pluggable cross-connection Screwable cross-connection End plate / Partition plate End bracket Testing / Checking Cover 10-pole 20-/2 10-pole Standard With assembly peg With lightning flash symbol Blank, white Blank, yellow WQV 2.5/2 32 A WQV 2.5/3 32 A WQV 2.5/4 32 A WQV 2.5/10 32 A WAP WU2.5N/4N 1.5 mm WAP WU2.5N/4N BL 1.5 mm WTA 1 WU1.5 5 mm WTA 1/ZA WU1.5 5 mm WA 4 GE BE 4.5 mm WA 4 WS 4.5 mm ZQV 4N/2 GE 32 A ZQV 4N/3 GE 32 A ZQV 4N/4 GE 32 A ZQV 4N/10 GE 32 A ZQV 4N/20 GE 32 A WQV 4/2 32 A WQV 4/3 32 A WQV 4/4 32 A WQV 4/10 41 A WAP mm WAP BL 1.5 mm WTA 3 WU4 6 mm WTA 3/ZA WU4 6 mm WA 5 MC NE WS 5 mm WA 5 MC NE GE 5 mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/5 / WS 12/5 WS 12/6 Socket and test plug refer to W-series Accessories section Only 400 V when using the shielding rail LS 2, /2013
6 WU 4/ZZ 4 WU 4/ZR 4 WU 4N 4 Twin connection Supplementary connection, right 6.1 x 70 x / x 63.5 x / x 44 x / (C) 600 (C) (C) 30 (C) 4 AWG AWG A4 / V-0 r { # / / / Nm (M 3) (C) 600 (C) (C) 30 (C) 4 AWG AWG A4 / V-0 r { # / / / Nm (M 3) () () 27 4 AWG kv / 3 A4 / V-0 { # KEMA 98ATEX1683 U / / Nm (M 3) 11 / 0.6 x 3.5 mm WU 4/ZZ WU 4/ZR WU 4N WU 4N BL ZQV 4N/2 GE 32 A ZQV 4N/3 GE 32 A ZQV 4N/4 GE 32 A ZQV 4N/10 GE 32 A ZQV 4N/20 GE 32 A ZQV 4N/2 GE 32 A ZQV 4N/3 GE 32 A ZQV 4N/4 GE 32 A ZQV 4N/10 GE 32 A ZQV 4N/20 GE 32 A ZQV 4N/2 GE 32 A ZQV 4N/3 GE 32 A ZQV 4N/4 GE 32 A ZQV 4N/10 GE 32 A ZQV 4N/20 GE 32 A WAP WU/WTR4/ZR 1.5 mm WAP WU/WTR4/ZR 1.5 mm WAP WU2.5N/4N 1.5 mm WAP WU2.5N/4N BL 1.5 mm WTA 1 WU1.5 5 mm WTA 1/ZA WU1.5 5 mm WA 4 GE BE 4.5 mm WA 4 WS 4.5 mm EK 5/6 / WS 12/6 EK 5/6 / WS 12/6 EK 5/6 / WS 12/ /2013.7
7 WU 6 6 WU Identically contoured design of 2.5 to 10 with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 7.9 x 60 x / x 60 x / Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/ (C) 600 (C) (C) 50 (C) 36 6 AWG AWG A5 / V-0? r u # i ~ x a KEMA 98ATEX1683 U / / Nm (M 3.5) 12 / 4.0 x 0.8 mm / (C) 600 (C) (C) 65 (C) AWG AWG B6 / V-0? r u # i ~ x a KEMA 98ATEX1683 U / Nm (M 4) 12 / 1.0 x 5.5 mm / / max. current of terminal (57 A) when using WQV! Conductor connection H07V-..10 and AWG 8 tighten with Nm. max. current of terminal (76 A) when using WQV. AWG 6/7 and H07V-R16 tighten with 2.4 Nm. Ordering data Version WU WU 6 BL V C rated voltage tested. Refer to the W-Series Accessories section for colour versions. WU WU 10 BL For colour variants, refer to the W-Series accessories section, Specific functions. Accessories Screwable cross-connection End plate / Partition plate End bracket Testing / Checking Cover 10-pole Standard With lightning flash symbol Blank, white Blank, yellow WQV 6/2 57 A WQV 6/3 57 A WQV 6/4 57 A WQV 6/10 57 A WAP mm WAP BL 1.5 mm WTA 5/1 5 mm WA 8 MC NE WS 8 mm WA 8 MC NE GE 8 mm WQV 10/2 57 A WQV 10/3 57 A WQV 10/4 57 A WQV 10/10 57 A WAP mm WAP BL 1.5 mm WTA 5/1 5 mm WA 8 MC NE WS 8 mm WA 8 MC NE GE 8 mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/8 / WS 12/6,5 Socket and test plug refer to W-series Accessories section Only 400 V when using the shielding rail LS 2, EK 5/5 / WS 12/6,5 Socket and test plug refer to W-series Accessories section Only 400 V when using the shielding rail LS 2, /2013
8 WU 10/ZR 10 WU WU 16N 16 Supplementary connection, right (4 ) With peg for higher connection stability Suitable for power distribution 9.9 x 70 x / mm 2 4mm 2 10mm x 60 x / x 60 x / IEC UL CSA (C) 600 (C) (C) 65 (C) 10 AWG AWG B6, A4 / V-0 r a / / / / Nm (M 4) 12 / 0.6 x 3.5 mm (C) 600 (C) (C) 85 (C) AWG AWG B7 / V-0? r u i ~ x a KEMA 98ATEX1683 U / / Nm (M 5) 16 / 1.0 x 5.5 mm IEC UL CSA (C) 300 (C) (C) 70 (C) 16 AWG AWG B7 / V-0 r i a / / Nm (M 4) 12 / 1.0 x 5.5 mm / / / max. current of terminal (76 A) when using WQV. AWG 6/7 and H07V-R16 secured with 2.4 Nm. ZR connection top right A 4. Conductor connection H07V-..16 and AWG 6 with tightening torque of Nm. AWG 6/7 and H07V-R25 tighten with a tightening torque of 1.5 Nm. WU 10/ZR WU 10/ZR BL The rated specifications refer to the 10 connection. WU 16/ZA WU 16/ZA BL Order no and (blue) versions without pegs (50 pcs.) WU 16N WU 16N BL WQV 10/2 57 A WQV 10/3 57 A WQV 10/4 57 A WQV 10/10 57 A WQV 16/2 76 A WQV 16/3 76 A WQV 16/4 76 A WQV 16/10 76 A WQV 16N/2 76 A WQV 16N/3 76 A WQV 16N/4 76 A WTW EN 3 mm WTA 5/1 5 mm WTA 2 WU mm WA 12 M. BL. 12 mm WA 12 NEUTRAL 12 mm WA 12N GE BE 12 mm WA 12 NEUTRAL 12 mm EK 5/5 / WS 12/6,5 EK 5/5 / WS 12/6,5 EK 5/5 / WS 10/ /2013.9
9 WU WU 35 IK 35 Identically contoured design of 2.5 to 10 with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. Clamping screw / spigot for good connection stability Hexagonal socket / spigot for good connection stability In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 16 x 60 x / x 60 x / Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/ (C) 1000 (C) (C) 150 (C) AWG AWG B8 / V-0? r u i ~ x a KEMA 98ATEX1683 U / / Nm (M 6) 18 / 6.5 x 1.2 mm / / (C) 600 (C) (C) 120 (C) AWG AWG B8 / V-0? r u i ~ x a KEMA 98ATEX1683 U / / Nm (M 6) 18 / S6 (IN 6911) / / Ordering data Version WU 35/ZA WU 35/ZA BL Order no and (blue) versions without pegs (40 pcs.) WU 35/IK/ZA Order no and (blue) versions without pegs (25 pcs.) Accessories Screwable cross-connection End plate / Partition plate End bracket Testing / Checking Cover 10-pole Standard With lightning flash symbol Blank, white Blank, yellow WQV 35/2 135 A WQV 35/3 112 A WQV 35/4 112 A WQV 35/ A WA 12 M. BL. 12 mm WA 12 NEUTRAL 12 mm WQV 35/2 135 A WQV 35/3 112 A WQV 35/4 112 A WQV 35/ A WA 12 M. BL. 12 mm WA 12 NEUTRAL 12 mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/5 / WS 12/6,5 EK 5/5 / WS 12/6, /2013
10 WU 35N Suitable for power distribution x 66 x / IEC UL CSA (C) 300 () (C) 10 () 35 AWG AWG kv / 3 B8 / V-0 r a / / Nm (M 6) 18 / 6.5 x 1.2 mm / WU 35N WU 35N BL V UL and CSA for usage groups B and C: can be used with isolating IN rails and when using WTW-type partitions. WQV 35N/2 135 A WQV 35N/3 101 A WQV 35N/4 101 A WTW EN 3 mm WA 16N GE BE 15.8 mm EK 5/5 / WS 12/6, /
11 WU 50N 50 WU 50N IR 50 Identically contoured design of 2.5 to 10 with identical end plates and partitions. An unmatched combination of many advantages! The compact terminals are impressive for their small size and rated cross-section capacity. Six-lobe socket NEW In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 18.5 x 70 x / x 70 x / Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/ (C) 600 (C) (C) 150 (C) AWG AWG B10 / V-0 r u # a KEMA 98ATEX1685 U / / Nm (M 6) 24 / S4 (IN 6911)...16 / / IEC UL CSA B10 / V-0 # / / Nm (M 6) 24 /...16 / / Copper straps can be used; see online catalogue for possible connections. Ordering data Version WU 50N WU 50N BL V UL and CSA for usage groups B and C: can be used with isolating IN rails and when using WTW-type partitions. WU 50N IR V UL and CSA for usage groups B and C: can be used with isolating IN rails and when using WTW-type partitions. Accessories Screwable cross-connection End bracket Cover With lightning flash symbol WQV 50N/2 150 A WQV 50N/3 150 A WQV 50N/4 150 A WA 20 GE WS 18 mm WQV 50N/2 150 A WQV 50N/3 150 A WQV 50N/4 150 A WA 20 GE WS 18 mm Additional connection 10 mm 2 WZA 50N 12.5 mm WZA 50N 12.5 mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/5 / WS 12/6,5 Auxiliary connection for additional conductor WZA 50N (up to 10, 41 A). EK 5/5 / WS 12/6, /2013
12 WU 70N 70 WU 95N/120N 120 WU x 75 x / x 91 x / x 100 x / (C) 600 (C) (C) 205 (C) AWG AWG B11 / V-0 r { u # KEMA 98ATEX1683 U / / Nm (M 8) 22 / S6 (IN 6911) (C) 1000 (C) (C) 220 (C) AWG AWG B13 / V-0 r u # a KEMA 98ATEX1683 U / / Nm M / S6 (IN 6911) (C) 600 (C) (C) 400 (C) AWG B15 / V-0 r # a KEMA 01ATEX2186 U / / Nm M / S8 (IN 6911) / / / / / / Copper straps can be used; see online catalogue for possible connections. Copper strips can be used. See online cat. When connecting AWG conductor of 250 kcmil, use stripping length 30 mm and tightening torque 16 Nm. Copper straps can be used; see online catalogue for possible connections. WU 70N/ WU 70N/35 BL V UL and CSA for usage groups B and C: can be used with isolating IN rails and when using WTW-type partitions. WU 95N/120N WU 95N/120N BL V UL and CSA for usage groups B and C: can be used with isolating IN rails and when using WTW-type partitions. WU WU 240 BL WQV 70N/2 192 A WQV 70N/3 192 A WQV 70N/4 192 A WQV 95/120/2 269 A WQV 95/120/3 269 A WQV 95/120/4 269 A WQB 240/2 320 A WQB 240/3 320 A WA 20 GE WS 18 mm WA 20 GE WS 18 mm WZA 70N 12.5 mm WZA 95N/120N 12.5 mm WZA mm EK 5/5 / WS 12/6,5 Auxiliary connection for additional conductor WZA 70N (up to 10, 41 A). EK 5/5 / WS 12/6,5 Auxiliary connection for additional conductor WZA 95N/120N (up to 10, 41 A). EK 5/5 / WS 12/6,5 Aux. connection for extra conductor WZA 240, Order no (up to 10, 57 A) ELPF insertion profile, for ribbon cable, Order no /
13 WU 70/95 95 WU 120/ Wires with large cross-sections do not need forceful pushing in. Instead they can be simply inserted into the terminal block. irect mounting is possible using the elongated slots in the bottom of the terminal. Conductor can be inserted from above / leaf spring Conductor can be inserted from above / leaf spring In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. /Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/ 27 x 132 x / x 132 x / Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Tightening torque range (terminal screw) Stripping length / Blade size 2 conductors with same cross-section (H05V/H07V) V A mm/ (C) 600 (C) (C) 205 (C) AWG AWG B12 / V-0 r u # i ~ x a KEMA 98ATEX1686 U / / Nm (M 8) 30 / S6 (IN 6911) / / (C) 600 (C) (C) 285 (C) AWG AWG B13 / V-0 r u # i ~ x a KEMA 98ATEX1686 U / / Nm M / S6 (IN 6911)...16 / / Ordering data Version WU 70/ WU 70/95 BL Refer to the online catalogue for information on the ribbon cable. Refer to the W- Series accessories section for information on direct mounting. WU 120/ WU 120/150 BL Refer to the online catalogue for information on the ribbon cable. Refer to the W- Series accessories section for information on direct mounting. Accessories Screwable cross-connection WQV 70/95/2 192 A WQV 70/95/3 232 A WQV 120/2 269 A WQV 120/3 269 A End bracket Cover With lightning flash symbol Blank, white WA 27 M. BL. 27 mm WA 27 NEUTRAL 27 mm WA 27 M. BL. 27 mm WA 27 NEUTRAL 27 mm Additional connection 4 mm 2 WZA 70/ mm WZA mm Identification systems (see assortment in catalogue 7) Marking tags EK 5/5 / WS 12/6,5 Auxiliary connection for the additional conductor WZA 70, Order no (up to 4, 32 A). EK 5/5 / WS 12/6,5 Auxiliary connection for the additional conductor WZA 120, Order no (up to 4, 32 A) /2013
Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationDatasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationTerminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
More informationStud terminals. Overview Stud terminals WF / WFF. Stud terminals
Overview WF / WFF Power transmission Weidmüller s extensive range of stud terminals offers secure connections for all applications which entail a transmission of energy. The connection range extends from
More informationNEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationData sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
More informationData sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
More informationData sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
More informationDatasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
More informationFeed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationContent Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1
Content Modular terminals for high-temperature applications TS 32 / Ceramic.2 -.3 Nuclear power terminal blocks Overview.4 -.5.6 -.10 Terminal Blocks.1 Modular terminals for high-temperature applications
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationMulti-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
More informationDOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationExtra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
More informationSCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
More informationW-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution
2 -series -series -series -series sets standards! hen it comes to functional perfection even in details, eidmüller s -series defines the market standards for many years now! The -series comprises producte
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart
More informationSCREW-TYPE DISTRIBUTION BLOCKS
CONTA-CONNECT SCREW-TYPE DISTRIBUTION BLOCKS Our ideas Your advantages CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationStud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
More informationDatasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
More information8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
More informationMain catalog. SNK series Terminal blocks. Phone: Fax: Web: -
Main catalog SNK series Terminal blocks SNK series, terminal blocks, accessories, marking solutions Ranges and technologies presentation 2 1 PI-Spring terminal blocks 1 2 Screw clamp terminal blocks 49
More informationDatasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationClearwater Tech - Phone: Fax: Web: -
Feed-through terminal Disconnect-test terminal KZ 1.5 Feed-through terminal 1.5 KZ 2.5 Feed-through terminal 2.5 /Length/height with TS35x7.5 / 5.1 x 24.8 x 25 24 / 2.5 0.21...2.5 5.1 x 25.5 x 26.5 32
More informationCONTA-CONNECT SUPPLEMENTS
CONTA-CONNECT SUPPLEMENTS CONTA-CONNECT system HSKG High-power stud terminals HSKG The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications.
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationContents. SAK-Series combination foot TS 35 + TS 32. SAK-Series combination foot TS 35 + TS 32 C.1
ontents / P.2 Stud terminals.6 Fuse terminals / P.7 Earth conductor isolating terminals.8.1 / P SK 2.5/EN 2.5 SK 4/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals
More informationClearwater D.94 Tech - Phone: Fax: Web: -
Modular design This mini-terminal family in tension clamp technology can be used to assemble individual blocks with 2- and 4-pole terminals. There are three different marking options for quick and clear
More informationOMNIMATE Power PCB terminals
Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension 6.35.6 dimension 10.16.8 dimension 12.70.11 dimension 15.00.12.1
More informationTerminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
More informationSL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
More informationRX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationPrintview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationTX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationUnimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
More informationShort form catalogue. Motor protection & control
Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59
More informationTools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
More informationDX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationBolt connection terminal blocks OTTA, UHV, HV. General information
OTTA, UHV, HV Bolt connection terminal blocks General information In traffic guidance, above all in the area of battery distribution, terminal blocks are frequently used to connect ring cable lugs. This
More informationMULTIBLOC 2.RST8 Size 2, 400A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 2.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 2.RST8 comprises NH fuse switch disconnectors for 400A. Products are designed in triple
More informationTALOGUE PRODUCT CA PRODUCT CATALOGUE
PRODUCT CATALOGUE 2017 contents Rail Terminals and Accessories 20-164 Screw Connection Terminals AVK Series 20-39 MVK Series 40-41 Functional Terminals 42-43 PV Series Terminals 44-45 PB & CPB Series Terminals
More informationCONTA-CONNECT. High-power stud terminals HSK. a b
CONTACONNECT Highpower stud terminals HSK The newest generation of stud terminals from CONTACLIP offers a secure connection for all energytransmitting applications. Depending on the conductor crosssection,
More information8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
More informationAmerican Electrical, Inc. Full Line Catalog fourth edition
American Electrical, Inc. Full Line Catalog fourth edition Connection, Power, & Protection...for less think inside the box Company History American Electrical, Inc. was founded in 1997 by Thomas McCormick,
More informationPhase + Neutral, neutral on right side
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34
More informationData Sheet PCB Products
ata Sheet CB roducts LSF-SMT = CB terminal block for lead-free soldering processes with innovative connection technology: "ush In". b The "ush In" direct-connection terminal connector system ensures short
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationPower distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
More informationApprovals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
More informationZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationMULTIBLOC 2.ST8 Size 2, 400A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 2.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 2.ST8 comprises NH fuse switch disconnectors for 400A. They are designed for bottom
More informationZS4-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK6D00 Catalogue Page SNK6S00 ZS4-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More information, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
More informationPhase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
More informationFemale socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
More informationDouble-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
More informationCONTA-CONNECT. Overview. Overview... 2 Our company... 3
SUPPLEMENTS CONTA-CONNECT Overview Overview... 2 Our company... 3 system SRK SSL... 4 Feed-through terminals SRK Protective earth terminals SSL... 8 Double-level terminal blocks SRKD SSLD... 6 Pick-off
More informationS826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en
2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive
More informationCABINETS AND ENCLOSURES. XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
O S O O CABINETS AND ENCLOSURES XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES II With its extensive ranges, the Legrand offer meets your quality standards and
More informationMULTIBLOC 1.ST8 Size 1, 250A, 690VAC, Design for Bottom Fitting, 1-,2-,3-,4-pole
MULTIBLOC 1.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 1.ST8 comprises NH fuse switch disconnectors for 250A. They are designed for bottom
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationMULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More informationZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
More informationMSW. MSW Catalog Number Sequence. Standard Features MSW 25 B- 3
Introducing the New WEG Series. The was developed according to IEC 60947-3 & UL508. The compact, reliable design of the allows the operator to safely disconnect power and isolate the circuit within the
More informationModular Terminals Technology
Modular Terminals Technology Contents Modular Terminals Technology Overview of modular terminals 4 Product range 6 Overview of connection systems 16 Standards, directives, terminology 18 Installation instructions
More informationSeries S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
More informationCT - CTS inserts with incorporated terminal block for multipole connectors (10A max versions)
inserts with incorporated terminal block for multipole connectors (A max versions) Use The CT-series multipole connectors (with incorporated terminal block) are recommended for greater cost-saving and
More informationMULTIBLOC 1.RST8 Size 1, 250A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 1.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 1.RST8 comprises NH fuse switch disconnectors for 250A. Products are designed in triple
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More informationThermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.
More informationFused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series
28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series 281... Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the
More informationIEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448
CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard
More informationHan Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationInterchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI
. Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationIEC Low Voltage Products Module 4
IEC Low Voltage Products Module 4 IEC Low Voltage Products NH DIN o All variations o Features benefits o Dual indication IEC Cylindrical Fuse System o Wide range of sizes and ratings o CCP NEW Product!
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationINDUSTRIAL COMPONENTS CATALOGUE. Terminals, switches and fuse bases
INDUSTRIAL COMPONENTS CATALOGUE Terminals, switches and fuse bases 2 Ensto at your service Ensto is an international industrial group and a family business specialising in the development, manufacture
More informationElectronic Circuit Breaker ESS20
Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode
More informationPendant control stations 6
Characteristics For control circuits Environment Conformity to standards EN/IEC 0-- EN/IEC 00-, UL 0, CSA C- n EN/IEC 0-- and EN/ISO 0: 00 for versions with trigger action Emergency stop Protective treatment
More informationZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral
Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004
More informationRittal RiLine60. The fascinating 60 mm system of the future assembly-friendly, time-saving, individual and modular. including.
Rittal RiLine60 including innovations 2007 The fascinating 60 system of the future assembly-friendly, time-saving, individual and modular R Rittal RiLine60 perfection in a 60 system Time-saving assembly,
More informationDistribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²
3 mm² - Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp connection 3 mm² Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp
More information