42.4. Terminal Blocks, Fuse Blocks and Fuse Holders. For Immediate Delivery or Tech Support call KMParts.com at (866)

Transcription

1 .4 Terminal Blocks, Contents Description C383 Series Disconnect Fuse Holders C350 Series Fuse Blocks and W Series Fuse Holders Page V7-T-129 V7-T-131 Overview Product Description vailable in compact finger safe (C383) and an open (C350) design. Eaton s fuse blocks and holders provide a simple DIN mounting device for protection in control circuits. pplication Description Fuse holders and blocks available for Class CC, midget, H, M and R. Standards and Certifications UL listed CS certified (may not apply to all styles) V7-T-128 Volume 7 Motor Controls, Logic and Connectivity C E pril For Immediate Delivery or Tech Support call KMParts.com at (866)

2 Terminal Blocks,.4 C383 Series Fuse Holders C383 Series Disconnect Fuse Holders Product Description Eaton s C383 Series disconnect fuse holders offer 600V fused circuit protection and subsequently no load switching. These compact disconnects are designed as components in switchboards, panels and control consoles where positive and safe circuit protection is required and where space is at a premium. The C383 fuse holders mount directly on standard TS35 DIN rails. Features Finger-Safe design Recessed termination screws and a fuse extraction door afford you IP20 grade protection and qualify as finger-safe per IEC standards Easy to adjust position on rail Simply unlatch the DIN rail adapter, slide the holder to desired position and relock Quick change of fuse permanently attached pivoting fuse door simplifies and speeds fuse extraction. No tools or accessories needed Contents Description Page C383 Series Disconnect Fuse Holders Product Selection V7-T-130 ccessories V7-T-130 Technical Data and Specifications V7-T-130 Dimensions V7-T-130 C350 Series Fuse Blocks and W Series Fuse Holders V7-T-131 Class CC model is UL listed and CS certified for branch circuit protection. Midget models are UL Recognized and CS certified for supplementary and high-speed protection Runs cool The vented design provides adequate air flow around the holders at all times Self-extinguishing UL 94-VO rated polyester material Standards and Certifications Rated voltage: CS/UL: 600 Vac/Vdc, 30 IEC (midget only): 690 Vac, 32 Volume 7 Motor Controls, Logic and Connectivity C E pril V7-T-129 For Immediate Delivery or Tech Support call KMParts.com at (866)

3 .4 Terminal Blocks, Product Selection C383FH_ ccessories Disconnect Fuse Holders ccessory Details C383MPCL Multi-pole connection links can be used to connect fuse holders together for multipole applications. Use two per connection. Disconnect Fuse Holders Technical Data and Specifications Disconnect Fuse Holders C383MPHP Dimensions pproximate Dimensions in Inches (mm) CH163 Series Cover Description Standard Pack Catalog For Class CC Fuse Single-pole fuse holder 12 C383FHCC For Midget Fuse (1-1/2 in x 13/32 in) Single-pole fuse holder 12 C383FHMD Description Standard Pack Catalog Midget or Class CC Fuse Holder Multi-pole connection links 100 C383MPCL Multi-pole handle pins 100 C383MPHP Description Housing Color Wire size Torque Fuse size 1.77 (45.0) 3.13 (79.5) 2.40 (61.0) 1.69 (43.0) Handle pins can be used to connect handles in multi-pole applications (17.8) 3.07 (78.0) Specification Polyester UL 94-VO rated Notes For additional technical information, consult the Eaton web site or Customer Support Center. UL recognizes both solid and stranded wire. Ferrules are not required. CS requires ferrules on stranded wire to achieve approval. White 8 18 WG 22 lb-in (2.5 Nm) 0.41 x 1.5 in 1.40 (35.6) 0.13 (3.2) 2.80 (71.2) 2.10 (53.4) V7-T-130 Volume 7 Motor Controls, Logic and Connectivity C E pril For Immediate Delivery or Tech Support call KMParts.com at (866)

4 Terminal Blocks,.4 C350 Series Fuse Blocks and W Series Fuse Holders C350 Series Fuse Blocks and W Series Fuse Holders Product Description Fuse Blocks These space-saving Type C350 Fuse Blocks are UL approved for motor loads and are rated 600V, 30. Fuse Holders Class H, M and R Fuse Blocks and dapters Cat. No. C350KD DIN Rail dapter Features Fuse Blocks Mount to 35 mm flat and 32 mm asymmetrical DIN rails 600V, 30 rated captive pressure plate terminals with copper alloy fuse clips Interlocking fuse blocks permit single, double or three-pole application reduce inventory Class CC fuses have an interrupting rating of 200,000 Rejection feature prevents insertion of fuses with lower interrupting or voltage ratings Cat. No. C350B1C61 One- Fuse Blocks Contents Description C383 Series Disconnect Fuse Holders C350 Series Fuse Blocks and W Series Fuse Holders Product Selection ccessories Technical Data and Specifications Dimensions Fuse Holders Break-resistant: molded of heat-stabilized nylon Fuse clips: springreinforced for cool operation Fuse clip terminations: one-piece construction Universal mounting dimensions, for easy assembly and retrofit Breathing action collar: maintenance-free Pressure wire connectors: vibration resistant Cat. No. C350BD3C61 Three- with dapter (Mounted on DIN Rail) Page V7-T-129 V7-T-132 V7-T-133 V7-T-133 V7-T-133 Standards and Certifications Contact Eaton for the latest UL 508 short circuit ratings on terminal blocks. Fuse Blocks UL listed CS certified Fuse Holders UL tested for OEM subfeed applications Volume 7 Motor Controls, Logic and Connectivity C E pril V7-T-131 For Immediate Delivery or Tech Support call KMParts.com at (866)

5 .4 Terminal Blocks, Product Selection Class R, Three- Fuse Holder Class CC Fuse Blocks Type Three-pole Single-pole DIN adapter Fuse Holders 250V Wire Termination Class H Fuse Holders Single collar (box lug) sized to ampere rating Class R Fuse Holders Single collar (box lug) sized to ampere rating Fuse Holders 600V Wire Termination Class H Fuse Holders Single collar (box lug) sized to ampere rating Class M Fuse Holders Combination of double quick-connect, 20 max., and binding head screw, #10 max., Cu/l Combination of double quick-connect, 20 max., and pressure plate screw, #10 max., Cu only Class R Fuse Holders Single collar (box lug) sized to ampere rating Combination of double quick-connect, 20 max., and binding head screw, #10 max., Cu/l Combination of double quick-connect, 20 max., and pressure plate screw, #10 max., Cu only Note Catalog C350BD3C61 C350B1C61 C350KD Three-pole device is supplied with DIN rail adapter. of s Carton Qty. 30 Catalog Carton Qty. 60 Catalog 1 10 W231H 10 W261H 2 5 W232H 5 W262H 3 5 W233H 5 W263H 1 10 WR231H WR233H 1 WR263H of s Class R Fuse Holder, Type WRR Control Transformer Fuse Blocks Combination of double quick-connect, 20 max., and pressure plate screw, #14 #10 Cu only Carton Qty. 30 Catalog Carton Qty. 60 Catalog 1 10 W631H 1 W661H 2 5 W632H 1 W662H 3 1 W633H 2 W663H 1 10 WM631F 2 8 WM632F 3 6 WM633F 1 10 WM631G 2 8 WM632G 3 6 WM633G 1 10 WR631H 2 5 WR632H 3 5 WR633H 5 WR663H WMR632F 3 6 WMR633F 1 10 WMR631G 3 6 WMR633G 3 6 WRR633G V7-T-132 Volume 7 Motor Controls, Logic and Connectivity C E pril For Immediate Delivery or Tech Support call KMParts.com at (866)

6 Terminal Blocks,.4 ccessories Fuse Holder ccessories Description Fuse puller Lighted fuse puller (120 Vac) Technical Data and Specifications Fuse Blocks Description Voltage rating mpere rating Dielectric strength mbient temperature Clip/terminals Screw and captive pressure plate Base DIN rail adapter Dimensions pproximate Dimensions in Inches (mm) Fuse Blocks 1.25 (31.8) Fuse Holders Class 3.00 (76.2) Catalog No. C350 Fuse Block Volts/ mperes Width Single (15.2) 0.78 (19.8) Catalog TBP TBLP Specification 600V Single- Class H & R 250V, 30 F Class M & R Dia. 600V, 30 Two- Two- Pressure plate terminals rated for V maximum 221 F (105 C) maximum Tin-plated copper alloy Zinc-plated steel Thermoplastic UL 94VO flammability rating Thermoplastic UL 94VO flammability rating 2.24 (56.9) Catalog No. C350 Fuse Block with DIN Rail dapter Three- Three- D D1 D1 Height B C Depth C B 2.35 (59.7) Three- Width Three- Width Mounting Holes D Class H & R 250V, V, 30/60 Two- D1 Three- D1 E Diameter F of Mounting Holes H, R 250V, (25.4) 2.00 (50.8) 3.00 (76.2) 3.13 (79.5) 1.56 (39.6) 0.38 (9.7) 1.25 (31.8) 2.50 (63.5) 0.22 (5.6) V, (36.6) 2.88 (73.2) 4.31 (109.5) 4.75 (120.7) 2.06 (52.3) 0.50 (12.7) 1.81 (46.0) 3.13 (79.5) 1.25 (31.8) 0.22 (5.6) V, 30/ (.9) 3.38 (85.9) 5.06 (128.5) 6.94 (176.3) 2.63 (66.8) 0.63 (16.0) 2.19 (55.6) 3.75 (95.3) 3.13 (79.5) 0.28 (7.1) M, R 600V, (21.3) 1.63 (41.4) 2.41 (61.2) 3.00 (76.2) 1.28 (32.5) 0.38 (9.7) 0.75 (19.1) 1.50 (38.1) 0.17 (4.3) F Dia. D E Single- Two- D Three- E D1 D Single- E D1 Two- C B Three- Volume 7 Motor Controls, Logic and Connectivity C E pril V7-T-133 For Immediate Delivery or Tech Support call KMParts.com at (866)

7 Index ccessories, 2-4, 6 accessories, 2 ccessory, 3 achieve, 3 action, 4 dapter, 4, 6 adapter, 2, 5-6 dapters, 4 additional, 3 adequate, 2 adjust, 2 afford, 2 air, 2 l, 5 all, 1-2 alloy, 4, 6 M, 1-6 mbient, 6 mpere, 6 ampere, 5 mperes, 6 an, 1, 4 and, 1-6 pplication, 1 application, 4 applications, 3-4 apply, 1 approval, 3 approved, 4 pproximate, 3, 6 pril, 1-6 are, 2-4 around, 2 as, 2 assembly, 4 asymmetrical, 4 at, 1-6 attached, 2 vailable, 1 available, 1 WG, 3 B Base, 6 BD, 4-5 be, 3 binding, 5 Block, 6 Blocks, 1-6 blocks, 1, 4 book, 1-6 both, 3 box, 5 branch, 2 Break, 4 Breathing, 4 C C, 1-6 call, 1-6 can, 3

8 Index captive, 4, 6 Carton, 5 Cat, 4 Catalog, 3, 5-6 CatalogWire, 5 CC, 1-5 Center, 3 Certifications, 1-2, 4 certified, 1-2, 4 CH, 3 change, 2 circuit, 2, 4 circuits, 1 Class, 1-6 Clip, 6 clip, 4 clips, 4 collar, 4-5 Color, 3 com, 1-6 Combination, 5 compact, 1-2 components, 2 connect, 3, 5 connection, 3 Connectivity, 1-6 connectors, 4 consoles, 2 construction, 4 consult, 3 Contact, 4 Contents, 1-2, 4 Control, 5 control, 1-2 Controls, 1-6 cool, 2, 4 copper, 4, 6 Cover, 3 CS, 1-4 Cu, 5 Customer, 3 D Data, 2-4, 6 Delivery, 1-6 Depth, 6 Description, 1-4, 6 design, 1-2 designed, 2 desired, 2 Details, 3 device, 1, 5 Dia, 6 Diameter, 6 Dielectric, 6 Dimensions, 2-4, 6 dimensions, 4 DIN, 1-2, 4-6 directly, 2 Disconnect, 1-4 disconnect, 2 disconnects, 2 door, 2 double, 4-5 E Easy, 2 easy, 4 Eaton, 1-4 eaton, 1-6 extinguishing, 2 extraction, 2 F FClass, 6 feature, 4 Features, 2, 4 Ferrules, 3 ferrules, 3 FH, 3 FHCC, 3 FHMD, 3 Finger, 2 finger, 1-2 flammability, 6 flat, 4 flow, 2 For, 1-6 for, 1-4, 6 free, 4 Fuse, 1-6 fuse, 1-4, 6 fused, 2 fuses, 4 FuseSingle, 3

9 Index G grade, 2 H H, 5 HClass, 5 Handle, 3 handle, 3 handles, 3 have, 4 head, 5 heat, 4 Height, 6 high, 2 Holder, 3, 5-6 holder, 2-3 Holders, 1-6 holders, 1-3 Holes, 6 Housing, 3 I IEC, 2 Immediate, 1-6 in, 1-3, 6 Inches, 3, 6 information, 3 insertion, 4 Interlocking, 4 interrupting, 4 inventory, 4 IP, 2 is, 2, 5 K KD, 4-5 KMParts, 1-6 L latest, 4 lb, 3 Lighted, 6 links, 3 listed, 1-2, 4 load, 2 loads, 4 Logic, 1-6 lower, 4 lug, 5 M maintenance, 4 material, 2 max, 5 maximum, 6 may, 1 Midget, 2-3 midget, 1-2 mm, 3-4, 6 model, 2 models, 2 molded, 4 Motor, 1-6 motor, 4 Mount, 4 mount, 2 Mounted, 4 Mounting, 6 mounting, 1, 4 MPCL, 3 MPHP, 3 Multi, 3 multi, 3 N needed, 2 Nm, 3 No, 2, 4, 6 no, 2 not, 1, 3 Note, 5 Notes, 3

10 Index, 3, 5-6 nylon, 4 O OEM, 4 of, 2, 4-6 offer, 2 on, 2-4 One, 4 one, 4 only, 2, 5 open, 1 operation, 4 or, 1-6 Overview, 1 P Pack, 3 Page, 1-6 panels, 2 per, 2-3 permanently, 2 permit, 4 piece, 4 pins, 3 pivoting, 2 plate, 4-6 plated, 6, 4-6 pole, 3-5 s, 5 Polyester, 3 polyester, 2 position, 2 positive, 2 premium, 2 Pressure, 4, 6 pressure, 4-6 prevents, 4 Product, 1-5 protection, 1-2 provide, 1 provides, 2 puller, 6 Q Qty, 5 qualify, 2 Quick, 2 quick, 5 R Rail, 4, 6 rail, 2, 5-6 rails, 2, 4 Rated, 2 rated, 2-4, 6 rating, 4-6 ratings, 4 Recessed, 2 Recognized, 2 recognizes, 3 reduce, 4 reinforced, 4 Rejection, 4 relock, 2 required, 2-3 requires, 3 resistant, 4 retrofit, 4 Runs, 2 S Safe, 2 safe, 1-2 saving, 4 Screw, 6 screw, 5 screws, 2 Selection, 2-5 Self, 2 Series, 1-4 short, 4 simple, 1 simplifies, 2 Simply, 2 Single, 3, 5-6 single, 4 site, 3

11 Index size, 3 sized, 5 slide, 2 solid, 3 space, 2, 4 Specification, 3, 6 Specifications, 2-4, 6 speed, 2 speeds, 2 spring, 4 stabilized, 4 Standard, 3 standard, 2 Standards, 1-2, 4 standards, 2 steel, 6 stranded, 3 strength, 6 styles, 1 subfeed, 4 subsequently, 2 supplementary, 2 supplied, 5 Support, 1-6 switchboards, 2 switching, 2 T Tab, 1-6 TBLP, 6 TBP, 6 Tech, 1-6 Technical, 2-4, 6 technical, 3 temperature, 6 Terminal, 1-6 terminal, 4 terminals, 4, 6 Termination, 5 termination, 2 terminations, 4 tested, 4 The, 2 the, 2-4 Thermoplastic, 6 These, 2, 4 Three, 4-6 three, 4 ThreeClass, 6 Thursday, 1-6 times, 2 Tin, 6 to, 1-5 together, 3 tools, 2 Torque, 3 Transformer, 5 TS, 2 Two, 6 two, 3 Type, 4-5 U UL, 1-4, 6 Universal, 4 unlatch, 2 Use, 3 used, 3 V Vac, 2, 6 Vdc, 2 vented, 2 vibration, 4 VO, 2-3, 6 Voltage, 6 voltage, 2, 4 Volts, 6 Volume, 1-6 W web, 3 where, 2 White, 3 Width, 6 Wire, 3, 5 wire, 3-4 with, 4-6 WM, 5 WMR, 5 WR, 5 WRR, 5 www, 1-6

12 Index Y you, 2 Z Zinc, 6