25.4. Molded Case Circuit Breakers. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents

Transcription

1 .4 Molded Case Circuit Breakers Gi-, Fi, Ji-, Ki-, Li-Frames Molded Case Circuit Breaker Family Molded Case Circuit Breakers When higher interrupting ratings are not required. Product Overview Gi-, Fi, Ji-, Ki-, Li-Frames Amperes IEC Vac NEMA 480 Vac Eaton s universal molded case circuit breakers, in one-, two- and three-pole configurations, are designed to provide an economical alternative for applications that do not require the higher interrupting ratings and modular accessories provided by Series G breakers. As with other members of Eaton s family of molded case circuit breakers, universal breakers provide high quality, reliability, unmatched performance, and outstanding value. For NEMA and IEC Standard Voltage Systems These breakers have been designated universal because they can be applied to both NEMA and IEC standard voltage systems: 277/ 480 Vac, 220/380 Vac and 240/415 Vac at 60 or 50 Hz. Eaton s universal breakers are rated from amperes and are available in five frame sizes. Each frame size has the same compact outside dimensions as Series C breakers. Additionally, universal breakers are suitable for 50 C applications and have been rigorously tested to the IEC standard. They are assembled in an ISO certified facility. Contents Description Product Selection Guide Electrical Characteristics Features Base Mounting Hardware Line and Load Termination Options Optional Line and Load Terminals Selection Product Selection Accessories Technical Data and Specifications Gi and Fi Time-Current Curves Ji, Ki Time-Current Curves Li Time-Current Curves Frame Weights Approximate Lbs (kg) Learn Online Drawings Online Trip Units and Terminals breakers are provided with factory-sealed thermal-magnetic trip units. The Gi-Frame breaker (15 1 amperes, UL listed up to 60A; 70 1A are IEC only) includes line and load terminals with breaker mounting hardware. Frames Fi (15 2 amperes), Ji (0 amperes), Ki ( amperes) and Li ( amperes) include line and load end caps with termination hardware installed. The Li-Frame ( amperes) is fitted with both line and load bus bar extensions that use standard hardware. A full complement of end cap kit terminals is available to customize universal breakers as required. Page V4-T-491 V4-T-491 V4-T-493 V4-T-493 V4-T-493 V4-T-493 V4-T-493 V4-T-494 V4-T-495 V4-T-496 V4-T-497 V4-T-497 V4-T-499 V4-T-500 V4-T-503 External Accessories breakers use the same external accessories as Series C breakers: handle mechanisms, motor operators, lock-off devices, bus bar extensions and multiple terminal arrangements. V4-T-490 Volume 4 Circuit Protection CA E April

2 Molded Case Circuit Breakers.4 Product Selection Guide Electrical Characteristics Frames Gi1 Fi2 Ji0 Eaton s Molded Case Circuit Breakers Electrical Characteristics Frame (690V) / Maximum Rated Amperes Interrupting Rating Gi1 Gi1 Fi100 Fi160 Fi2 Ji0 IEC Notes Vac I cu /I cs 18/5 /7 /13 35/18 35/18 35/ Vac / cu /I cs 18/5 18/9 /13 /13 / Vac I cu /I cs 14/7 20/10 20/10 20/10 NEMA 240 Vac /480 Vac of Poles 1 2, 3 2, 3 2, 3 2, 3 3 Continuous Ampere Rating (40 C) Fi-Frame currently UL listed up to 2A. Gi 1 maximum voltage rating or Ui is 600 Vac. Gi UL listed. Gi-Frames above 60A are not UL listed. 15, 20, 30, 40, 60, 70, 80, 100, 1 15, 20, 30, 40, 60, 70, 80, 100, 1 15, 20, 30, 40, 60, 70, 80, 100 1, 150, , 200, 2 0 Volume 4 Circuit Protection CA E April V4-T-491

3 .4 Molded Case Circuit Breakers Electrical Characteristics, continued Frames Ki400 Li630 Eaton s Molded Case Circuit Breakers Electrical Characteristics Frame (690V) / Maximum Rated Amperes Interrupting Rating Ki400 Li630 IEC Vac I cu /I cs 35/18 35/ Vac / cu /I cs /13 / Vac I cu /I cs 20/10 20/10 NEMA 240 Vac /480 Vac of Poles 3 3 Continuous Ampere Rating (40 C) Note Li500 and Li600 are UL listed; Li630 is not UL listed. 300, 350, , 600, 630 V4-T-492 Volume 4 Circuit Protection CA E April

4 Molded Case Circuit Breakers.4 Features Base Mounting Hardware Metric base mounting hardware is included with each breaker. English mounting hardware is available for field installation only. Line and Load Terminals Both line and load terminals are included with Gi-Frame universal breakers. Options Optional Line and Load Terminals Compression terminals with hardware are available for a wide range of conductors. Field installation only. Base Mounting Hardware Frames English Gi-Frame Line and Load Termination Optional Line and Load Terminals Metric Fi-Frame BMH1 BMH1M Ji-Frame BMH2 BMH2M Ki-Frame BMH3 BMH3M Li-Frame BMH4 BMH4M Breaker Termination Type Awg Wire Range Metric Wire Range (mm) Wire Type Bolt Size English Bolt Size Metric Torque Lb In Torque Nm Notes Base mounting hardware, applicable to both NEMA and IEC applications, is included with Gi-Frame breakers. A separate catalog number is not required. Package of three terminals. Gi Wire #14 1/ Cu only Included Fi End cap M Ji End cap 5/16 M Ki End cap 5/16 M Li 630A End cap 5/16 M Breaker Awg Wire Range Metric Wire Range (mm) Wire Type Torque Lb In Torque Nm Fi #14 # Cu/Al T100FB #8 10 Cu/Al T100FB #6 #4 10 Cu/Al T100FB #3 4/0 95 Cu/Al T100FB #3 4/0 95 Cu only T150FB #4 4/0 95 Cu/Al TA2FB # Cu/Al TA2FDK Ji Cu/Al TA0KB Ki (1) (1) Cu/Al TA350K 3/0 0 (2) (2) Cu/Al TA400K Li 630A (2) (2) Cu/Al TA602LD (2) (2) Cu/Al TA603LDK Volume 4 Circuit Protection CA E April V4-T-493

5 .4 Molded Case Circuit Breakers Selection Frame Size Gi = Gi-Frame Fi = Fi-Frame Ji = Ji-Frame Ki = Ki-Frame Li = Li-Frame Gi-Frame 1 = Single-pole 2 = Two-pole 3 = Three-pole Fi-Frame 2 = Two-pole 3 = Three-pole of Poles Ji-Frame 3 = Three-pole Ki-Frame 3 = Three-pole G i L Li-Frame 3 = Three-pole Terminals L = Line and load terminals Gi-Frame 015= 15 amp 020= 20 amp 030= 30 amp 040= 40 amp 050= 50 amp 060= 60 amp 070= 70 amp 080= 80 amp 100= 100 amp 1= 1 amp Fi-Frame 015= 15 amp 020= 20 amp 030= 30 amp 040= 40 amp 050= 50 amp 060= 60 amp 070= 70 amp 080= 80 amp 100= 100 amp 1= 1 amp 150= 150 amp 160= 160 amp 175= 175 amp 200= 200 amp 2= 2 amp Ampere Rating Ji-Frame 0= 0 amp Ki-Frame 300= 300 amp 350= 350 amp 400= 400 amp Li-Frame 500= 500 amp 600= 600 amp 630= 630 amp 700= 700 amp 800W = 800 amp V4-T-494 Volume 4 Circuit Protection CA E April

6 Molded Case Circuit Breakers.4 Product Selection s When ordering universal breakers, use the appropriate catalog numbers given below. Gi 1 Fi 2 Gi-Frame/15 1 Amperes Frames/ Ampere Rating Fi-Frame/15 2 Amperes Single-Pole Two-Pole Three-Pole Gi1/15 1 amperes Gi1015 Gi2015 Gi3015 Frames/ Ampere Rating Gi1020 Gi2020 Gi3020 Gi1030 Gi2030 Gi3030 Gi1040 Gi2040 Gi3040 Gi1050 Gi2050 Gi3050 Gi1060 Gi2060 Gi3060 Gi1070 Gi2070 Gi3070 Gi1080 Gi2080 Gi3080 Gi1100 Gi2100 Gi3100 Gi11 Gi21 Gi31 Single-Pole Two-Pole Three-Pole Fi100/ amperes Fi2015L Fi3015L Fi2020L Fi3020L Fi2030L Fi3030L Fi2040L Fi3040L Fi2050L Fi3050L Fi2060L Fi3060L Fi2070L Fi3070L Fi2080L Fi3080L Fi2100L Fi3100L Fi160/1 160 amperes Fi21L Fi31L Fi2150L Fi3150L Fi2160L Fi3160L Fi2/175 2 amperes Fi2175L Fi3175L Fi2200L Fi3200L Fi22L Fi32L Volume 4 Circuit Protection CA E April V4-T-495

7 .4 Molded Case Circuit Breakers Ji 0 Ki 400 Li 630 Accessories Ji0/0 Amperes Frames/ Ampere Rating End Cap Accessory Kit End caps for line and load conductor termination are optional with each breaker. End caps secure the conductor with a ring-type connector. The kit includes one end cap, three cap screws, three nuts and three lock washers. Ki-Frame/ Amperes Li-Frame/ Amperes End Cap Accessory Kit Single-Pole Two-Pole Three-Pole Ji0/0 amperes Ji30L Frames/ Ampere Rating Single-Pole Two-Pole Three-Pole Ki400/ amperes Ki3300L Frames/ Ampere Rating Ki3350L Ki3400L Single-Pole Two-Pole Three-Pole Li630/ amperes Li3500 Li3600 Li3630 V4-T-496 Volume 4 Circuit Protection CA E April

8 Molded Case Circuit Breakers.4 Technical Data and Specifications Gi and Fi Time-Current Curves Type Gi1 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 415 at 50/60 Hz Two- and three-pole Breaker Rating Continuous Amperes Single-Pole Instantaneous Trip Amperes For NEMA interrupting ratings, see Electrical Characteristics on Pages V4-T-491 and V4-T-492 Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC 18 5 Breaker Rating Continuous Amperes TIME IN SECONDS Two-Pole In Series Instantaneous Trip Amperes Fixed Inverse-Time Overcurrent Release Fixed Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Type Fi100 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC x l n AC 18 9 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Fixed Electromagnetic Release 440 AC DC Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Volume 4 Circuit Protection CA E April V4-T-497

9 .4 Molded Case Circuit Breakers Fi Time-Current Curves, continued Type Fi160 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs 1 8 x l n AC x l n AC x l n 440 AC 14 7 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Fixed Electromagnetic Release 0 DC 10 5 Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Type Fi2 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC 14 7 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release 0 DC 10 5 Fixed Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n V4-T-498 Volume 4 Circuit Protection CA E April

10 Molded Case Circuit Breakers.4 Ji, Ki Time-Current Curves Type Ji0 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 20 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC TIME IN SECONDS Fixed Inverse-Time Overcurrent Release AC AC DC 10 5 Adjustable Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Type Ki400 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 20 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC TIME IN SECONDS Fixed Inverse-Time Overcurrent Release 0 DC 10 5 Adjustable Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Volume 4 Circuit Protection CA E April V4-T-499

11 .4 Molded Case Circuit Breakers Li Time-Current Curves Type Li630 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 20 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC 13 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release 440 AC DC 10 5 Adjustable Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n Type Li800 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 0 Breaker Rating Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 30 ka at 480 Vac Interrupting Ratings (IEC 947-2) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC TIME IN SECONDS Fixed Inverse-Time Overcurrent Release 440 AC DC 10 5 Adjustable Electromagnetic Release Total Clearing Time Interrupting Rating determines end of curve CURRENT IN MULTIPLES OF / n V4-T-500 Volume 4 Circuit Protection CA E April

12 Molded Case Circuit Breakers.4 Typical Specifications for Molded Case Circuit Breakers Electrical circuits shall be protected by molded case circuit breakers as manufactured by Eaton. Each pole of the one-, two- and three-pole circuit breakers shall provide complete circuit overcurrrent protection by having inverse time and instantaneous tripping characteristics and, where applicable, be current limiting. The circuit breakers shall be operated by a toggle-type handle and have a quickmake, quick-break, overcenter switching mechanism that is mechanically trip-free from the handle so that the contacts cannot be closed against short circuit currents. Tripping due to overload or short circuits shall be clearly indicated by the position of the handle. The ON and OFF positions shall be clearly marked on the cover of the circuit breaker (F-Frame and larger) along with the international symbols I for ON and O for OFF on the handle, providing positive indication of the circuit breaker contact position. Additionally, a color-coded indication of the circuit breaker contact position shall be provided for the F-Frame and have red for ON, green for OFF, and white for TRIPPED. An easily accessible Push-To-Trip button for mechanically exercising the trip unit shall be provided on the cover of each circuit breaker (F-Frame and larger). All poles of a multi-pole circuit breaker shall be so constructed as to ensure simultaneous open, close and trip operations. Molded case circuit breakers shall be of the inverse time and instantaneous trip type as provided by thermalmagnetic trip elements. Non-interchangeable trip circuit breakers shall be factory sealed to prevent tampering. Ampere ratings shall be clearly visible from the front of the circuit breaker. Contacts shall be non-welding silver alloy. Arc extinction shall be accomplished by means of DE-ION arc extinguishers, consisting of metal grids mounted in an insulating support. Circuit breakers shall be completely enclosed in a high-strength glasspolyester case. The minimum interrupting ratings of the circuit breakers shall be at least equal to the available short circuit current at the line terminals. The circuit breakers can be applied in series rated applications and subject to test data verification. Circuit breakers in frame sizes 100 amperes through 800 amperes shall be equipped with thermalmagnetic trip units. Circuit breakers in the 1 ampere frame size shall be supplied in one-, twoand three-pole models, as specified on the drawings. Circuit breakers in ratings of 2 ampere frame size shall be supplied in two- or threepoles as specified on the drawings. The 0 amperes through 800 amperes frame sizes shall be supplied as three-pole models only as specified on the drawings. Electrical operators for circuit breakers of the 400 ampere frame size and below shall be of the solenoid type with maximum five-cycle closing characteristics. Electrical operators for circuit breaker frame sizes 630 amperes through 800 amperes shall be of the motor driven type. All electrical operators shall be cover mounted. Circuit breakers shall be provided with uniformly designed nameplates to clearly indicate the type, rating, listing/recognition/ certification marks, accessory details and other information defined in IEC Volume 4 Circuit Protection CA E April V4-T-501

13 .4 Molded Case Circuit Breakers Dimensions Approximate Dimensions in Inches (mm) All dimensions are provided for guidance and should not be used for construction purposes unless approved. Contact Eaton for detailed outline drawings. Gi, Fi, Ji, Ki Frame Front, Side View and Front Cover Cutout Front View Side View Front Cover Cutout ON OFF B Gi, Fi, Ji, Ki Frame C L Handle D A Frame A B C D E F G H I J K L M Gi 4.87 (123.8) 3.00 (76.2) 2.63 (66.7) 2.91 (73.8) NA 3.00 (76.2) NA 2.22 (56.3) 1.50 (38.1) NA 1.50 (38.1) NA 0.00 (0.0) Fi 6.00 (152.4) 4.13 (104.8) 3.37 (85.7) 3.63 (92.1) NA 1.19 (30.2) NA 2.91 (73.8) 2.32 (58.8) NA 0.59 (15.1) NA 0. (6.4) Ji (4.0) 4.13 (104.8) 4.06 (103.2) 5.79 (147.2) 3.50 (88.9) 1.56 (39.7) 0.87 (22.2) 3.94 (100.0) 2.92 (74.2) 0.72 (18.2) 0.78 (19.8) 1.75 (44.5) 0.34 (8.7) Ki (7.2) 5.49 (139.5) 4.06 (103.2) 5.77 (146.5) 4.78 (121.5) 2.63 (66.7) 1. (31.8) 3.75 (95.3) 2.92 (74.2) 0.81 (20.6) 1.31 (33.4) 2.39 (60.7) 0.34 (8.7) C M H G C L Handle F E K C L Breaker L I J V4-T-502 Volume 4 Circuit Protection CA E April

14 Molded Case Circuit Breakers.4 Approximate Dimensions in Inches (mm) Li 630 (Bus Extensions Not Included) Li 800 Frame Front and Side View 0.20 (5.1) R 0.44 (11.1) Diameter Li 630, Li 800 Frame Frame A B C D E F G H I J K L M Li (273.1) 8. (209.6) 4.06 (103.2) 5.61 (142.6) 7.28 (184.9) 3.44 (87.3) 1.50 (38.1) 3.28 (83.3) 1.33 (33.7) 0.97 (24.6) 1.72 (43.7) 3.64 (92.5) 0. (6.4) Li (184.9) 3.44 (87.3) 1.50 (38.1) 3.28 (83.3) 1.33 (33.7) 0.97 (24.6) 1.72 (43.7) 3.64 (92.5) 0. (6.4) Frame Weights Approximate Lbs (kg) Frame Gi1 Fi2 Ji0 Ki400 Li630 Li800 Single-pole 0.75 (0.34) Two-pole 1.0 (0.6) 3.0 (1.8) Three-pole 1.33 (0.8) 4.5 (2.4) 12.5 (5.2) 13.4 (6.1) 21.5 (9.4) 24.9 (11.3) Note See drawing above. Front View 8. (209.6) 5.50 (139.7) 2.75 (69.9) 1.75 (44.5) 5.61 (142.6) (273.1) (323.0) (333.0) (381.0) (406.4) Side View 4.06 (103.2) 3.81 (96.8) 0.39 (10.0) 0.90 (22.9) 0.97 (24.6) Volume 4 Circuit Protection CA E April V4-T-503

15 Index A above, 2, 14 AC, 8-11 ac, 1-2 accessible, 12 Accessories, 1, 7 accessories, 1 Accessory, 7 accessory, 12 accomplished, 12 Additionally, 1, 12 Adjustable, against, 12 Al, 4 All, alloy, 12 along, 12 alternative, 1 amp, 5 Ampere, 2-3, 5-7, 12 ampere, 12 Amperes, 1-2, 6-11 amperes, 1, 6-7, 12 AmperesInterrupting, 3 An, 12 an, 1, 12 and, 1, 3-5, 7-9, applicable, 4, 12 applications, 1, 4, 12 applied, 1, 12 appropriate, 6 approved, 13 Approximate, 1, 14 April, 1-14 Arc, 12 arc, 12 are, 1-4, 7, 13 arrangements, 1 As, 1 as, 1, 12 assembled, 1 at, 1-14 available, 1, 4, 12 Awg, 4 B bar, 1 Base, 1, 4 base, 4 be, 1, because, 1 been, 1 below, 6, 12 BMH, 4 Bolt, 4 Both, 4 both, 1, 4 break, 12 Breaker, 1, 4, 8-11, 13 breaker, 1, 4, 7, 12

16 Index Breakers, 1-14 breakers, 1, 4, 6, 12 BreakersElectrical, 3 Bus, 14 bus, 1 button, 12 by, 1, 12 C CA, 1-14 call, 1-14 can, 1, 12 cannot, 12 Cap, 7 cap, 1, 4, 7 caps, 1, 7 Case, 1-14 case, 1, 12 CaseCircuit, 9, 11, 1, 4-7 catalog, 4, 6 center, 12 certification, 12 certified, 1 Characteristics, 1-3, 8 characteristics, 12 Circuit, 1-14 circuit, 1, 12 circuits, 12 CL, 13 Clearing, 8-11 clearly, 12 close, 12 closed, 12 closing, 12 coded, 12 color, 12 com, 1-14 compact, 1 complement, 1 complete, 12 completely, 12 Compression, 4 conductor, 7 conductors, 4 configurations, 1 connector, 7 consisting, 12 constructed, 12 construction, 13 Contact, 13 contact, 12 Contacts, 12 contacts, 12 Contents, 1 continued, 9 continuedframes, 3 Continuous, 2-3, 8-11 Cover, 13 cover, 12 Cu, 4 cu, 2-3 CURRENT, 8-11 Current, 1, 8-11 current, 12 currently, 2 currents, 12 curve, 8-11 Curves, 1, 8-11 customize, 1 Cutout, 13 cycle, 12 D Data, 1, 8 data, 12 DC, 8-11 DE, 12 defined, 12 Delivery, 1-14 Description, 1 designated, 1 designed, 1, 12 detailed, 13 details, 12 determines, 8-11 devices, 1 Dimensions, dimensions, 1, 13 DimensionsApproximate, 13 do, 1 drawing, 14 Drawings, 1 drawings, 12-13

17 Index driven, 12 due, 12 E Each, 1, 12 each, 4, 7, 12 easily, 12 Eaton, 1-3, eaton, 1-14 economical, 1 Electrical, 1-3, 8, 12 electrical, 12 Electromagnetic, 8-11 elements, 12 enclosed, 12 End, 4, 7 end, 1, 7-11 English, 4 ensure, 12 equal, 12 equipped, 12 exercising, 12 Extensions, 14 extensions, 1 External, 1 external, 1 extinction, 12 extinguishers, 12 F facility, 1 factory, 1, 12 Family, 1 family, 1 FB, 4 FDK, 4 Features, 1, 4 Fi, 1-2, 4-6, 8-9, Field, 4 field, 4 fitted, 1 five, 1, 12 Fixed, 8-11 FixedElectromagnetic, 9 For, 1-14 for, 1, 4, 7, Frame, 1-7, frame, 1, 12 FrameFrame, 13 Frames, 1-2, 4, 6-7 free, 12 from, 1, 12 Front, front, 12 full, 1 G Gi, 1-2, 4-6, 8, given, 6 glass, 12 green, 12 grids, 12 guidance, 13 Guide, 1-2 H Handle, 13 handle, 1, 12 Hardware, 1, 4 hardware, 1, 4 has, 1 have, 1, 12 having, 12 high, 1, 12 higher, 1 Hz, 1, 8-11

18 Index I iameter, 14 Ics, 2-3, 8-11 Icu, 2-3, 8-11 IEC, 1-4, 8-12 Immediate, 1-14 IN, 8-11 In, 4, 8 in, 1, Inches, include, 1 Included, 4, 14 included, 4 includes, 1, 7 indicate, 12 indicated, 12 indication, 12 information, 12 installation, 4 installed, 1 Instantaneous, 8-11 instantaneous, 12 insulating, 12 interchangeable, 12 international, 12 Interrupting, 2, 8-11 interrupting, 1, 8-12 Inverse, 8-11 inverse, 12 ION, 12 is, 1-4, 12 ISO, 1 K ka, 8-11 KB, 4 kg, 1, 14 Ki, 1, 3-5, 7, 10, Kit, 7 kit, 1, 7 KMParts, 1-14 L larger, 12 Lb, 4 Lbs, 1, 14 LD, 4 LDK, 4 Learn, 1 least, 12 Li, 1, 3-5, 7, 11, 14 limiting, 12 Line, 1, 4-5 line, 1, 4, 7, 12 listed, 1-3 listing, 12 ln, 8-9 Load, 1, 4 load, 1, 4-5, 7 lock, 1, 7 J Ji, 1-2, 4-5, 7, 10, M Magnetic, 8-11 magnetic, 1, 12 make, 12 manufactured, 12 marked, 12 marks, 12 Maximum, 2-3, 8-11 maximum, 2, 12 means, 12

19 Index mechanically, 12 mechanism, 12 mechanisms, 1 members, 1 metal, 12 Metric, 4 minimum, 12 mm, 4, models, 12 modular, 1 Molded, 1-14 molded, 1, 12 motor, 1, 12 mounted, 12 Mounting, 1, 4 mounting, 1, 4 multi, 12 multiple, 1 MULTIPLES, 8-11 N NA, 13 nameplates, 12 NEMA, 1-4, 8-11 Nm, 4 Non, 12 non, 12 Not, 14 not, 1-4, 13 Note, 3, 14 Notes, 2, 4, 1-7 number, 4 s, 6 numbers, 6 nuts, 7 O OF, 8-11 of, 1-5, 8-12 OFF, off, 1 ON, on, 8, 12 one, 1, 7, 12 Online, 1 only, 1, 4, 12 open, 12 operated, 12 operations, 12 operators, 1, 12 Optional, 1, 4 optional, 7 Options, 1, 4 or, 1-14 ordering, 6 other, 1, 12 outline, 13 outside, 1 outstanding, 1 over, 12 Overcurrent, 8-11 overcurrrent, 12 overload, 12 Overview, 1 P Package, 4 Page, 1 Pages, 8 performance, 1 Pole, 6-8 pole, 1, 5, 8-12, 14 Poles, 2-3, 5 poles, 12 polyester, 12 position, 12 positions, 12 positive, 12 prevent, 12 Product, 1-2, 6 protected, 12 Protection, 1-14 protection, 12 provide, 1, 12 provided, 1, providing, 12 purposes, 13 Push, 12

20 Index Q quality, 1 quick, 12 R Ra, 2 Range, 4 range, 4 Rated, 3 rated, 1, 12 Rating, 2-3, 6-11 rating, 2, 12 Ratingi, 5 Ratings, 8-11 ratings, 1, 8-12 recognition, 12 red, 12 Release, 8-11 reliability, 1 require, 1 required, 1, 4 rigorously, 1 ring, 7 rip, 8 rms, 8-11 S same, 1 screws, 7 sealed, 1, 12 SECONDS, 8-11 secure, 7 See, 14 see, 8 Selection, 1-2, 5-6 separate, 4 Series, 1, 8 series, 12 shall, 12 short, 12 should, 13 Side, silver, 12 simultaneous, 12 Single, 5-8, 14 Size, 4-5 size, 1, 12 sizes, 1, 12 so, 12 solenoid, 12 Specifications, 1, 8, 12 specified, 12 Standard, 1 standard, 1 strength, 12 subject, 12 suitable, 1 supplied, 12 Support, 1-14 support, 12 switching, 12 symbols, 12 Symmetrical, 8-11 systems, 1 SystemsIEC, 1 T TA, 4 tampering, 12 Tech, 1-14 Technical, 1, 8 ted, 2 terminal, 1 Terminals, 1, 4 terminals, 1, 4-5, 12 TerminalsGi, 5 Termination, 1, 4 termination, 1, 7 test, 12 tested, 1 that, 1, 12 The, 1, 7, 12 the, 1, 6-7, 12 Thermal, 8-11 thermal, 1, 12

21 Index These, 1 They, 1 they, 1 Three, 5-7, 10-11, 14 three, 1, 4, 7-9, 12 through, 12 TIME, 8-11 Time, 1, 8-11 time, 12 To, 12 to, 1-2, 4, 12 toggle, 12 Torque, 4 Total, 8-11 Trip, 1, 8-12 trip, 1, 12 TRIPPED, 12 Tripping, 12 tripping, 12 Two, 5-9 two, 1, 12 Type, 4, 8-11 type, 7, 12 Typical, 12 U Ui, 2 UL, 1-3 uniformly, 12 unit, 12 Units, 1 units, 1, 12, 1-14 universal, 1, 4, 6 unless, 13 unmatched, 1 up, 1-2 use, 1, 6 used, 13 V Vac, 1-3, 8-11 value, 1 Vdc, 8-11 verification, 12 View, visible, 12 Voltage, 1 voltage, 1-2 Volts, 8-11 Volume, 1-14 W washers, 7 Weights, 1, 14 welding, 12 wg, 4 When, 1, 6 where, 12 white, 12 wide, 4 Wire, 4 with, 1, 4, 7, 12 wo, 6, 14 www, 1-14