Switchboards Instant Service

Transcription

1 January 1 Vol. 1, Ref. No. [0845] Switchboards Instant Service - Accessories Table -57. Meter Compartment Doors (Meter Sockets Not Included) Door Size Dimensions Drilling Inches mm H x 32 W H x 8.8 W Blank MD 194. One socket MD H x 32 W H x 8.8 W Blank MD Two sockets MD2 5. Table -58. Meter Sockets For Field Installation of Jaws M4 M5 M of Jaws 8 13 M8 M13 M Fifth jaw at 9 o clock position. Basic four jaw socket with fifth and sixth jaws at 3 and 9 o clock positions. Required for all SDG&E services rated at 3-Phase 4-Wire Circuit Breakers Table -59. Circuit Breakers for Distribution Panels 2V AC Maximum (1-Phase 3-Wire or 3-Phase 4-Wire) 1-Pole 0/2V AC 2-Pole 0/2V AC 2-Pole 2V AC 3-Pole 2V AC BABI BABI BABI BABI BABI BABI BABI BABI BABI BABI BABI BABI Table -. Circuit Breakers for Distribution Panels 480Y/277V AC (3-Phase 4-Wire) BABHI BABHI BABHI BABHI BABHI BABHI BABHI BABHI BABHI BABHI BABHI BABHI 70 BAB70I 1. BAB70HI 217. BAB70HI 2. 1 BABI BAB2I 1-Pole 2-Pole 3-Pole BABHI BAB2HI ED2I ED21I ED2I ED2I ED2I ED2I BABHI BAB3HI ED3I ED31I ED3I ED3I ED3I ED3I GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHBI GHB70I GHB80I GHBI GHB2I GHBI GHBI GHBI GHBI GHBI GHBI GHB70I GHB80I GHBI GHB3I FD2I 0. FD3I 1,0. 1 FD21I FD2I FD2I FD2I FD2I FD31I FD3I FD3I FD3I FD3I Discount Symbol DE1 CAT..01.T.E

2 -2 Product Line Overview January 1 Vol. 1, Ref. No. [0468] Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed to provide circuit protection for low voltage distribution systems. They are described by NEMA as,... a device for closing and interrupting a circuit between separable contacts under both normal and abnormal conditions, and furthermore as,... a breaker assembled as an integral unit in a supporting and enclosing housing of insulating material. The NEC describes them as, A device designed to open and close a circuit by non-automatic means, and to open the circuit automatically on a predetermined overload of current, without injury to itself when properly applied within its rating. So designed, Cutler-Hammer circuit breakers protect conductors against overloads and conductors and connected apparatus, such as motors and motor starters, against short circuits. In low voltage distribution systems, there are many varied applications of molded case circuit breakers. Cutler-Hammer offers the most comprehensive family of molded case circuit breakers in the industry. This family of circuit breakers includes: Thermal Magnetic Trip Breakers Electronic rms Trip Breakers Molded Case Switches Motor Circuit Protectors Current Limiting Breakers Special Application Breakers World Breakers Special Calibration Special non-ul-listed calibrations are available for certain ambient temperatures other than C and for frequencies other than / Hz or DC. Reduced interrupting ratings will apply for 0 Hz applications. Maximum thermal calibration is limited to 1A at 0 Hz. Suffix H01 0 Hz % Adder Moisture-Fungus Treatment All circuit breaker cases are molded from glass-polyester which does not support the growth of fungus. Any parts which are susceptible to the growth of fungus will require special treatment. Suffix J01 Fungus Treated Freeze-Tested Circuit Breakers The circuit breakers may be ordered with freeze testing. This option uses special lubrication and mechanical operation is verified at - C. Suffix F01 Freeze Tested Marine Applications circuit breakers can be supplied to meet the following marine specifications: U.S. Coast Guard CFR 46 ABS American Bureau of Shipping IEEE 45 These specifications generally require molded case circuit breakers to be supplied with C ambient calibration, special nameplating, and plug-in adapter kits. When plug-in adapter kits are used, no terminals need be supplied. Circuit breakers can also be supplied to meet UL489 Supplement SA (Marine Use) and UL489 Supplement SB (Naval Use). UL489 Supplement SA applies to vessels over feet in length. Requirements include C ambient calibration, special labeling, and no use of aluminum conductors or terminals. Suffix H08 Marine UL 489 Supplement SB requires C ambient calibration, vibration testings, special nameplating and no use of aluminum conductors or terminals. Suffix H09 Naval $3. + % Adder % Adder % Adder % Adder Standards and Certifications Molded case circuit breakers are designed to conform with the following standards: Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers and Circuit Breaker Enclosures National Electrical Manufacturers Association Standards Publication No. AB1-1993, Molded Case Circuit Breakers Australian Standard AS 2184, British Standards Institution Standard BS 4752: Part 1, Switchgear and Control Gear Part 1: Circuit Breakers Canadian Standards Association Standard C22.2 No. 5, Service Entrance and Branch Circuit Breakers International Electrotechnical Commission Recommendations IEC 7-1, Circuit Breakers Japanese T-Mark Standard Molded Case Circuit Breakers South African Bureau of Standards, Standard SABS 6, Standard Specification for Molded Case Circuit Breakers Swiss Electro-Technical Association Standard SEV 7-1, Safety Regulations for Circuit Breakers Union Technique de l Electricite Standard NF C 63-0, Low Voltage Switchgear and Control Gear Circuit Breaker Requirements Verband Deutscher Elektrotechniker (Association of German Electrical Engineers) Standard VDE 06, Low Voltage Switchgear and Control Gear, Circuit Breakers Conformance with these standards satisfies most local and international codes, assuming user acceptability and simplified application. Molded case circuit breakers equal or exceed Federal Specification Classification W-C-375b requirements for the particular class associated with the circuit breaker frame being considered. C Calibration Add suffix V to for complete breaker, listed above, when ordering listed ampere ratings for breakers to be used in C ambients. Note: For further information, see Circuit Breaker, CD-ROM SA.74A.01.T.E. CAT..01.T.E

3 January 1 Vol. 1, Ref. No. [0485] s -19 Contents Description Page Product Description Technical Data and Specifications Dimension/Weights Product Selection Product Description All Circuit Breakers are HACR rated. All circuit breakers through amperes are suitable for HID (high intensity discharge) use. All circuit breakers are suitable for reverse feed use. Typical Breaker Technical Data and Specifications Table -28. UL489 Interrupting Capacity s Circuit Breaker ED EDH EDC EHD 1 Interrupting Capacity (Symmetrical s) (ka) Volts AC (/ Hz) Volts DC FDB, FD 1, 4 HFD 1, 4 FDC, 4 22 DC ratings apply to substantially non-inductive circuits. 2-pole circuit breaker, or two poles of 3-pole circuit breaker. Time constant is 3 milliseconds minimum at ka and 8 milliseconds minimum at 22 ka Table - IEC 7-1 (P1) Interrupting Capacity s (P1) Circuit Breaker ED EDH EDC of Poles Interrupting Capacity (Symmetrical s) (ka) Volts AC (/ Hz) Volts DC 2, 2 380, FDB, FD 1, 4 HFD 1, 4 FDC, 4 22 DC ratings apply to substantially non-inductive circuits. 2-pole circuit breaker, or two poles of 3-pole circuit breaker. Time constant is 3 milliseconds minimum at ka and 8 milliseconds minimum at 22 ka CAT..01.T.E

4 - s January 1 Vol. 1, Ref. No. [0486] Dimensions/Weights Table -. Dimensions in Inches (mm) Width Height Depth () 2.75 (70) 4.1 (5) 5.5 (1) 6 (2) 6 (2) 6 (2) 6 (2) Table -31. Approximate Shipping Weight, Lbs. (Kg) Breaker ED, EDH, EDC 3 (1.361) 4.5 (2.041) EHD, FDB, FD, HFD, FDC 2 (.7) 3 (1.361) 4.5 (2.041) 6 (2.721) Product Selection This information is presented only as an aid to understanding s. It is not to be used to build s for circuit breakers or trip units. Table -32. Circuit Breaker ing System F D C L Circuit Breaker EHD FDB FD HFD FDC 1 = 1 Pole 2 = 2 Poles 3 = 3 Poles 4 = 4 Poles Trip s (FD, HFD, FDC, 2-, 3-, 4-Pole Only) (FD, HFD, FDC, 2-, 3-, 4-Pole Only) (FD, HFD, FDC, 2-, 3-, 4-Pole Only) Suffix E = % Protected (4-Pole only) Neutral Pole EH = % Protected (4-Pole only) K = High Magnetic Molded Case Switch L = Line and Load Terminals S = Stainless Steel Terminals V = C Calibration W = Without Terminals Y = Line Terminals Only Z = Terminals ( s) E D C L Circuit Breaker ED EDH EDC 2 = 2-Pole 3 = 3-Pole Trip s 1 L W Y Z Suffix = Line and Load Terminals = Without Terminals = Line Terminals Only = Terminals ( s) CAT..01.T.E

5 -22 s January 1 Vol. 1, Ref. No. [0488] Table -. FD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Max. C 0V AC Maximum, 0V DC 277V AC Maximum, 0V AC Maximum, 0V DC 1V DC 14 0V AC 277V AC 480V AC FDB (Includes Terminals on Load End Only) FD (Includes Terminals on Load End Only) 2-Pole 3-Pole 4-Pole 1-Pole 2-Pole 3-Pole 4-Pole FDB FDB FDB FDB FDB FDB FDB FDB45 FDB FDB FDB70 FDB80 FDB FDB2 FDB21 FDB21 FDB ,2. 1,2. 1,2. FDB FDB FDB FDB FDB FDB FDB FDB45 FDB FDB FDB70 FDB80 FDB FDB3 FDB31 FDB31 FDB3 1,5. 1,5. 1,5. FDB FDB FDB FDB FDB FDB FDB FDB45 FDB FDB FDB70 FDB80 FDB FDB4 FDB41 FDB41 FDB4 Not UL listed. 5 kaic interrupting rating. UL listed for SWD applications, see NEC Article 2-83 (d). Note: Instruction Leaflet/FRED 29C ,1. 1,1. 1,1. 1,1. 1,1. 2,495. 2,495. 2,495. FD FD FD FD FD FD FD FD45 FD FD FD70 FD80 FD FD1 FD11 FD11 FD FD FD FD FD FD FD FD45 FD FD FD70 FD80 FD FD2 FD21 FD21 FD2 FD2 FD2 FD2 1,9. 1,9. 1,9. 1,9. 1,9. 1,9. FD FD FD FD FD FD FD45 FD FD FD70 FD80 FD FD3 FD31 FD31 FD3 FD3 FD3 FD3 FD FD FD FD FD FD FD45 FD FD FD70 FD80 FD FD4 FD41 FD41 FD4 FD4 FD4 FD4 Table -36. s HFD and FDC Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Max. C 277V AC Maximum, 1V DC 0V AC Maximum, 0V DC 0V AC Maximum, 0V DC 277V AC 480V AC 480V AC HFD (Includes Terminals on Load End Only) FDC Current Limiting (Includes Terminals on Load End Only) 1-Pole 2-Pole 3-Pole 4-Pole 2-Pole 3-Pole 4-Pole HFD HFD HFD HFD HFD HFD HFD45 HFD HFD HFD70 HFD80 HFD HFD1 HFD11 HFD11 HFD ,001. 1,001. 1,005. HFD HFD HFD HFD HFD HFD HFD45 HFD HFD HFD70 HFD80 HFD HFD2 HFD21 HFD21 HFD2 HFD2 HFD2 HFD2 2,5. 2,5. 2,5. 2,7. 2,7. 2,7. HFD HFD HFD HFD HFD HFD HFD45 HFD HFD HFD70 HFD80 HFD HFD3 HFD31 HFD31 HFD3 HFD3 HFD3 HFD3 UL listed for SWD applications, see NEC Article 2-83(d). Note: Instruction Leaflet/FRED 29C1 HFD HFD HFD HFD HFD HFD HFD45 HFD HFD HFD70 HFD80 HFD HFD4 HFD41 HFD41 HFD4 HFD4 HFD4 HFD4 4,5. 4,5. 4,5. 4,370. 4,370. 4,370. FDC FDC FDC FDC FDC FDC FDC45 FDC FDC FDC70 FDC80 FDC FDC2 FDC21 FDC21 FDC2 FDC2 FDC2 FDC2 1,6. 1,6. 1,6. 1,6. FDC FDC FDC FDC FDC FDC FDC45 FDC FDC FDC70 FDC80 FDC FDC3 FDC31 FDC31 FDC3 FDC3 FDC3 FDC3 1,7. 1,7. 1,7. 1,7. 1,7. 1,7. 1,7. 1,7. 1,7. FDC FDC FDC FDC FDC FDC FDC45 FDC FDC FDC70 FDC80 FDC FDC4 FDC41 FDC41 FDC4 FDC4 FDC4 FDC4 2,9. 2,9. 2,9. 2,9. 2,9. 2,9. 2,9. 2,9. 2,9. 6,6. 6,6. 6,6. 6,6. 6,6. 6,6. Discount Symbol CB-2 CAT..01.T.E

6 January 1 Vol. 1, Ref. No. [0489] s -23 Molded Case Switches Molded Case Switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories, Inc., Standard UL 87. Line and Load Terminals Line and Load Terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. Except as noted, terminals comply with Underwriters Laboratories, Inc., Standards UL486A and UL486B. Unless otherwise specified, circuit breakers are factory equipped with load terminals only. Ordering Information circuit breakers and molded case switches have load terminals only as standard equipment. When standard line-end terminals (same as standard load-end terminals) are required, add Suffix L to the circuit breaker. When nonstandard or optional line and/or load terminals are required, order by style number. Specify if factory installation is required. Table -37. Molded Case Switches Maximum C 2-Pole 3-Pole 4-Pole 480V AC Maximum, 0V DC Complete Circuit Breaker with Load Side Terminals Only Note: Molded Case Switches may open above 1800 amperes. Note: Instruction Leaflet/FRED 29C1 Table -38. Line and Load Terminals Maximum Breaker s EHD2K EHD3K Terminal Body Material Standard Pressure Terminals (EHD) Steel Steel Optional Pressure Terminals Stainless Steel Wire AWG Wire Range Cu /0 14 4/ /0 4 4/0 6 0 kcmil 0V AC Maximum, 0V DC Complete Circuit Breaker with Load Side Terminals Only Not for use with ED, EDH, EDC breakers. Includes terminal shield kit. Adds approximately 3 inches (76.2) to breaker height. Available for use on 3-pole breaker only FD2K FD2K FD2K FD3K FD3K FD3K FD4K FD4K FD4K Metric Wire Range mm Package of 3 Terminals 3TFB 3TFB 3TAFD 3TAFB 3TAFD 3TFB 3TAFDK ,1.00 1, ,2.00 1, ,00 1, Discount Symbol CB-2 CAT..01.T.E