Molded Case Circuit Breakers

Transcription

1 Series G Circuit Breakers.1 Introduction Product Overview V4-T- Typical Applications V4-T- Series G in Eaton Assemblies V4-T-3 in Eaton Assemblies V4-T-3. Series G Globally Accepted Breakers Product Overview V4-T-4 Product Selection Overview V4-T-6 Product Selection Guide V4-T-7 Technical Data and Specifications V4-T-9 Dimensions and Weights V4-T-14 EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Flex Shaft V4-T-111 High Performance Rotary Handle Mechanisms V4-T-114 Direct (Close-Coupled) Handle Mechanisms V4-T-10.3 North American Standards and Special Application Breakers Product Overview V4-T-11 Standards and Certifications V4-T-1 Quick Reference V4-T-13 G-Frame ( Amperes) V4-T-17 F-Frame (10 5 Amperes) V4-T-141 J-Frame (70 50 Amperes) V4-T-158 K-Frame ( Amperes) V4-T-166 L-Frame ( Amperes) V4-T-193 M-Frame ( Amperes) V4-T-19 N-Frame ( Amperes) V4-T-30 R-Frame ( Amperes) V4-T-58 Motor Circuit Protectors (MCP) V4-T-8 Motor Protection Circuit Breakers (MPCB) V4-T-89 Type ELC Current Limiter Attachment (Size 0 4) V4-T-91 Internal Accessories V4-T-96 External Accessories V4-T-37.4 Universal When Higher Interrupting s Are Not Required Universal V4-T Specialty Specialty Breakers Engine Generator Circuit Breakers V4-T-374 Direct Current Circuit Breakers V4-T-380 E Mining Service Breakers V4-T-393 Classic Mining Breakers V4-T-416 Add-On Ground Fault Protection Type GFR V4-T-430 PVGard Solar Circuit Breakers V4-T-433 Learn Online Drawings Online Volume 4 Circuit Protection CA E February 01 V4-T-1

2 .1 Introduction Series G E-Frame and F-Frame Product Overview Series G vs. Eaton s Electrical Sector, under the Eaton brand, offers the widest variety of molded case circuit breakers available today. Designed for electrical and machinery OEMs serving a range of industries and applications, these proven designs incorporate the latest in innovation with the high reliability that has been our hallmark since the advent of the circuit breaker in the 190s. The family ranges from amperes, and includes thermal-magnetic breakers, electronic trip breakers, molded case switches, motor circuit protectors, and specially designed breakers for engine generator, DC and mining applications. The new Series G line features an average 35% size reduction, common field-installable internal accessories, and advanced trip unit functionality that eliminates the need for rating plugs. These breakers meet the requirements of UL, CSA, IEC, CCC and CE, allowing the OEM to standardize on a design that meets the needs of their global customer base. Application Description Eaton molded case circuit breakers cover the widest range of applications in the industry: Electrical OEMs Machinery OEMs Navy breakers: UL 489 Supplement SB MIL-C MIL-C ABS/NVR Mining breakers up to 1100 Vac Earth leakage DC breakers Vdc Engine generator breakers amperes Current limiting breakers Typical Applications Machine Tool Control Panels and Motor Control Centers Designed for these equipment requirements, including new world-class accessories. Panelboards As both main and branch circuit protection devices. Contents Description Introduction Series G Universal Specialty Breakers Learn Online Drawings Online Feeder Pillars In distribution systems to provide main and branch circuit protection. Switchgear In distribution systems to provide main and branch circuit protection up to 500 amperes (RG-Frame). Bus Bar Trunking Tap-Offs In bus bar trunking tap-offs to provide circuit protection. Typical Eaton Applications Switchboard Page V4-T-4 V4-T-11 V4-T-360 V4-T-374 Individual Enclosures Completely assembled in enclosures to meet specific customer requirements. Additional Applications Special versions of each Eaton frame are available to provide safe equipment control and protection in mining and other applications. Contact your Eaton agent or distributor for additional information. Panelboard Individual Circuit Breaker Enclosure Bus Bar Trunking Tap-Off Machine Tool Control Panel V4-T- Volume 4 Circuit Protection CA E February 01

3 Introduction.1 Eaton in Assemblies Series G Frame Ampere Range 1 15 amperes is the maximum UL and CSA rating for EG. 600 amperes is the maximum UL and CSA rating for LG amperes is the maximum UL and CSA rating for NG. Panelboards Switchboards Motor Control Centers Enclosed 1A A 3A 4 5P PRL-C IFS Freedom IT. Control Bus Plugs EG JG 0 50 LG NG RG Frame Ampere Range Panelboards Switchboards Motor Control Centers Enclosed 1A A 3A 4 5P PRL-C IFS Freedom IT. Control Bus Plugs FD/ED 15 5 JD KD LD MDL ND RD Enclosed Breaker Enclosed Breaker Volume 4 Circuit Protection CA E February 01 V4-T-3

4 . Series G Series G, Amperes for UL, CSA & IEC Applications Product Overview Series G, Amperes for UL, CSA & IEC Applications Eaton Series G molded case circuit breakers provide increased performance in considerably less space than standard circuit breakers or comparable fusible devices. The G signifies global applications: Series G circuit breakers are marked with UL, CSA, CE, IEC and KEMA KEUR listings. Other advantages include: Field-fit accessories Common accessories through 630 amperes Electronic trip units from 0 to 500 amperes UL-listed and IEC-rated, 30 ma ground fault/earth leakage modules Built-in ground fault protection down to 0 amperes The EG, JG and LG frames are designed around space-saving footprints. The NG and RG use the proven Eaton ND and RD designs, but use metric threading on their line and load conductors. The Series G family includes five frame sizes in ratings from 15 to 500 amperes. Series G offers a choice of several interrupting capacities up to 00 ka at 480 volts AC (00 ka at 40 volts AC). Standard calibration is 40 C. For applications in high ambient temperature conditions, 50 C factory calibration is available on thermal-magnetic breakers (not UL). The Most Logically Designed Contact Assembly The flexibility and outstanding performance characteristics of Eaton circuit breakers are made possible by the best contact designs in circuit breaker history. Our technology creates a highspeed blow-open action using the electromechanical forces produced by high-level fault currents. Contents Description Page Series G Standards and Certifications V4-T-5 Product Selection Overview V4-T-6 Product Selection Guide V4-T-7 Technical Data and Specifications V4-T-9 Dimensions and Weights V4-T-14 EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Learn Online Drawings Online Eaton circuit breakers are operated by a toggle-type mechanism that is mechanically trip-free from the handle so that the contacts cannot be held closed against short circuit currents. Tripping due to overload or short circuits is clearly indicated by the position on the handle. This remarkably fast and dependable contact action is designed to enhance safety. Thorough In-Plant Testing The quality, dependability and reliability of every Eaton Circuit Breaker is ensured by a thorough program of inplant testing. Two calibration tests are conducted on every pole of every circuit breaker to verify the trip mechanism, operating mechanism, continuity and accuracy. Current Limiting Characteristics Circuit breakers are current limiting because of their high repulsion contact arrangement and use of state-of-the-art arc extinguishing technology. Eaton offers one of the most complete lines of current limiting breakers in the industry. The industrial breakers are available in current limiting versions with interrupting capacities up to 00 ka at 480V without fuses in the same physical size as standard and high interrupting capacity breakers. V4-T-4 Volume 4 Circuit Protection CA E February 01

5 Series G. Operating Mechanisms Eaton circuit breakers have a toggle handle operating mechanism, which also serves as a switching position indicator. The indicator shows the positions of: ON, OFF and TRIPPED. The toggle handle snaps into the TRIPPED position if the breaker is tripped by one of its overcurrent, short circuit, shunt or undervoltage releases. Before the circuit breaker can be reclosed following a trip-out, the toggle handle must be brought beyond the OFF position (RESET). The circuit breaker can then be reclosed. As an additional switching position indicator for EG- to RG-Frame circuit breakers, there are two windows on the right and on the left of the toggle handle, in which the switching state is indicated by means of the colors red, green and white corresponding to the ON, OFF and TRIPPED positions respectively. Positions of the Toggle Handle Drive OFF Reset ON Tripped Standards and Certifications Eaton Series G circuit breakers meet applicable UL 489 and IEC standards. Molded case circuit breakers from Eaton are designed to conform with the following international standards: Australian Standard AS 184 and AS molded case circuit breakers British Standards Institution Standard EN International Electromechanical Commission Recommendations IEC circuit breakers Japanese T-Mark standard molded case circuit breakers National Electrical Manufacturers Association Standards Publication No. AB molded case circuit breakers South African Bureau of Standards, Standard SANS 156, Standard Specification for molded case circuit breakers Swiss Electro-Technical Association Standard SEV 947., Safety Regulations for circuit breakers Union Technique de l Electricite Standard NF C 63-10, low voltage switchgear and control gear circuit breaker requirements Verband Deutscher Elektrotechnike (Association of German Electrical Engineers) Standard VDE 0660, low voltage switchgear and control gear, circuit breakers Global Third-Party Certification Certification marks ensure product compliance with the total standard via the third party witnessing of tests by globally recognized independent certification organizations. KEMA is a highly recognized, independent international organization that offers certification and inspection facilities for equipment in many industries. The KEMA- KEUR mark is the highest certification an electrical product can receive from KEMA. Our IEC molded case circuit breakers are KEMA tested and certified. These breakers are also listed in accordance with UL 489, as well as CSA C. No KEMA, UL and CSA provide ongoing follow-up testing and inspections to ensure that Eaton molded case circuit breakers continue to meet their exacting standards. ISO Certification Eaton circuit breakers are manufactured in ISO certified facilities. Volume 4 Circuit Protection CA E February 01 V4-T-5

6 . Series G Product Selection Overview Electronic Trip Units (Digitrip RMS Trip Units) Multi-Function Electronic Trip Units for All Applications True rms Sensing Digitrip rms trip units use Eaton s microprocessor-based intelligence to provide true rms sensing, permitting increased accuracy and reliable system protection. True rms sensing is not susceptible to nuisance tripping when waveforms containing high harmonic currents are present. Digitrip RMS 310+ Digitrip RMS 310+ electronic trip units are available with Eaton circuit breakers JG, LG and NG. They are selectable long time delay (t LD ) and pickup settings (I r ). A rating plug is not required. The Digitrip 310+ offers true rms sensing, is front adjustable and has an optional local display of current and cause of trip. Plugs If rating plugs are needed for the R-Frame, they are marked for 50/60 Hz applications. Both fixed and adjustable rating plugs are available, providing further flexibility when applied to selectively coordinated systems. Curve Shaping When selectively coordinated systems are called for, Digitrip RMS 310+ will provide a cost-effective solution for a variety of applications. The standard Digitrip RMS 310+ includes an adjustable short time pickup setting encompassing an I t ramp function which provides the basic LS curve shaping function. JG-, LG- and NG- Frames have an adjustable long time delay. JG-, LG- and NG-Frames have selectable long time delay (t LD ) and pickup settings (I r ). A rating plug is not required. The optional Digitrip RMS 310+ provides additional flat response short time delay adjustments on an instantaneous setting to provide LSI curve shaping capability. Digitrip RMS 310+ trip units are available with ground fault pickup and flat response ground fault delay which provides the trip unit with full function LSG and LSIG curve shaping flexibility. Digitrip RMS 310+ trip units can effectively coordinate with both sophisticated upstream power breakers as well as downstream thermal magnetic breakers making Digitrip RMS 310+ trip units the cost-effective reliable choice for selectively coordinated systems. Thermal Memory All Digitrip RMS trip units incorporate a long delay. Thermal memory prevents the system from cumulative overheating due to repeated overcurrent events that may occur in quick succession. Field Testing A field test kit is available for Digitrip RMS 310+ trip units. Arcflash Reduction Maintenance Mode (ARMS) ARMS is an available feature on the LG- and NG-Frame with 310+ electronic trip units. This feature increases worker safety by providing an accelerated instantaneous trip unit to reduce arc flash. Digitrip RMS 610 and 910 Digitrip RMS 610 and 910 trip units are available with Eaton R-Frame circuit breakers 800 through 500 amperes. Digitrip 610 and 910 trip units provide unparalleled system protection with the added convenience of a local display. Curve Shaping Digitrip RMS 610 and 910 trip units are available with up to nine curve shaping choices achieved by adjusting up to seven switches on the front of the unit for optimum system coordination. Maximum curve shaping flexibility is provided by dependent long and short delay adjustments that are long delay pickup (I r ) based, depicted on the front of the unit by the blue portion of the time-current curve. Additional coordination capability can be provided by utilizing the short delay and ground fault zone selective interlocking features available on these trip units. System Diagnostics Digitrip RMS 610 and 910 models of trip units provide long delay, short delay, instantaneous, and ground fault cause of trip LEDs on the front of the unit. Their display shows a magnitude of trip information, as well as remote signal contacts, for improved system alarming. System Monitoring Digitrip 610 and 910 trip units have the capability to monitor phase currents, as well as neutral or ground currents. This information is displayed on a large digital display mounted on the unit. Digitrip RMS 910 trip units can also provide the user with power and energy monitoring capability. Peak power demand, present power demand, and total energy, as well as forward and reverse energy can be monitored with this unit. Digitrip RMS 910 trip units have the additional capability of monitoring line-to-line voltage, as well as system power factor. Both parameters are displayed in the digital display window and are supported by LEDs to indicate which parameter is being displayed. Harmonics Monitoring Digitrip RMS 910 trip units are capable of displaying values of current harmonics in the digital display window. Percentage of harmonic content can be monitored for each phase, up to the 7th harmonic. Additionally, a total harmonic distortion value can be calculated and displayed. Communications Digitrip RMS 910 units have built-in communications options to allow all protection, monitoring, and control information to be transmitted back to a central location via the Eaton PowerNet system. Field Testing Integral field testing capability is provided on all 610 and 910 trip units. No additional test set is needed to perform both trip and no trip field testing. V4-T-6 Volume 4 Circuit Protection CA E February 01

7 Series G. Product Selection Guide Electronic Trip Units Digitrip RMS 310+, 610 and 910 I n = plug rating. I r = Long delay setting. 1 JG- and LG-Frames have selectable settings instead of a rating plug. JG-, LG- and NG-Frames have adjustable long delay times of 4 seconds. 3 JG/LG: X 14X (I n ); NG: X 8X (I n ); RG: X 8X (I n ); 500 ampere RG-Frame % x (I n ). 4 JG-Frame also has a 14X setting. 5 LS, LSG only. 6 Not to exceed 100 amperes. 7 JG- and LG-Frames are Instantaneous, 10 ms. NG- and RG-Frames are Instantaneous, 100, 300 and 500 ms. RMS 310+ RMS 610 RMS 910 RG JG Breaker Type Eaton frame(s) JG-, LG-, NG- and RG-Frames RG-Frame RG-Frame Ampere rating 0 500A A A Interrupting rating at 415V 35, 70, 100 ka 70, 100 ka 70, 100 ka Trip Unit Sensing rms sensing Yes Yes Yes Protection and Coordination Protection Ordering options LS, LSG LSI, LSIG LI, LS, LSI, LIG, LSG, LSIG LI, LS, LSI, LIG, LSG, LSIG Fixed rating plug (I n ) 1 Yes Yes Yes Yes Overtemperature trip Yes Yes Yes Yes Long delay Adjustable rating plug (l n ) 1 Yes Yes No No Long delay setting (l n ) (l n ) x (l n ) x (l n ) Long delay time I t at 6x 10 seconds 10 seconds 4 seconds 4 seconds Long delay thermal memory Yes Yes Yes Yes High load alarm No No 0.85 x I r 0.85 x I r Short delay Short delay setting VAR/frame 3 VAR/frame % S1 and S x (I r ) % S1 and S x (I r ) Short delay time I t 100 ms No 100, 300, 500 ms 100, 300, 500 ms Short delay time flat No I 300 ms ms ms Short delay time ZSI No No Yes Yes Instantaneous Instantaneous setting No % x (l n ) % M1 and M x (l n ) % M1 and M x (l n ) Discriminator No No Yes 5 Yes 5 Instantaneous override Yes Yes Yes Yes Ground fault Ground fault setting VAR/Frame 6 VAR/Frame % x (l n ) % x (l n ) 6 Ground fault delay I t at 0.6x No No 100, 300, 500 ms 100, 300, 500 ms Ground fault delay flat I 500 ms 7 I 500 ms ms ms Ground fault ZSI No No Yes Yes Ground fault thermal memory No No Yes Yes LG/NG Volume 4 Circuit Protection CA E February 01 V4-T-7

8 . Series G Digitrip RMS 310+, 610 and 910, continued RMS 310+ RMS 610 RMS Using cause of trip module (catalog number TRIP-LED). Using ammeter or remote ammeter/cause of trip display (catalog number DIGIVIEW and DIGIVIEWR06). LG/NG RG LS, LSG LSI, LSIG LSI, LSIG, LSIG (A) LSI (A), LSIG System Diagnostics Cause of trip LEDs Yes 1 No Yes Yes Magnitude of trip information No No Yes Yes Remote signal contacts No No Yes Yes System Monitoring Digital display Yes No Yes Yes Current Yes No Yes Yes Voltage Yes No No Yes Power and energy Yes No No Yes Power quality harmonics No No No Yes Power factor No No No Yes System Communications PowerNet No No No Yes Field Testing Testing method Test set Test set Integral Integral JG V4-T-8 Volume 4 Circuit Protection CA E February 01

9 Series G. Technical Data and Specifications s Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, , 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4, 3, 4 1, 3, 4 1, 3, 4 3, 4, 3, 4, 3, 4, 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 Breaker Capacity (ka rms) Vac Hz NEMA, 40 Vac UL, CSA 480 Vac Vac /50 Vdc IEC Vac I cu I cs Vac I cu I cs Vac I cu I cs /50 Vdc 5 I cu I cs Ampere range A A A Trip Units F = Fixed A = Adjustable T = Thermal M = Magnetic FT-FM AT-FM 1 15 amperes is the maximum UL and CSA rating for the EG. 630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA listed rating for the LG. 3 Breaker type C, U and X are current limiting per UL EG breaker rated 600/347 Vac. 5 Two poles in series Vdc only for single-pole breakers. 7 Not suitable for DC application. Four-pole ground fault not available. FT-AM AT-AM Electronic (Digitrip RMS 310) FT-AM AT-AM Electronic (Digitrip RMS 310) Interchangeable Built-in Thermal Fixed thermal magnetic Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic LS RMS 7 LSI LSG LSIG Utilization category A A A A A A A A A A A A A A A A A A A A Volume 4 Circuit Protection CA E February 01 V4-T-9

10 . Series G Frames NG and RG NG RG 1 Maximum rated current (amperes) 800, , , , 000, , 000, 500 Breaker type S H C 3 S U H C 3 of poles, 3, 4, 3, 4, 3, , 4 3, 4 Breaker Capacity (ka rms) AC Hz NEMA, 40 Vac UL, CSA 480 Vac Vac IEC Vac I cu I cs Vac I cu I cs Vac I cu I cs Vdc I cu I cs Ampere range A A A 1600A 800A A A Trip units Electronic Electronic (Digitrip RMS 310+) (Digitrip RMS 310+, 610 and 910) Interchangeable Built-in Electronic 5 LI 6 6 LS LSI LIG 6 6 LSG LSIG ALSI ALSIG Utilization category A A A A A A A 1 The RG MCCBs use metric threading in their line and load terminals. If English (Imperial) threading is needed, use RD MCCBs. Contact Eaton for more information. NG 1600 ampere frame is not UL or CSA listed. 3 Not KEMA-KEUR listed. 4 IEC H.5 Annex H is not KEMA-KEUR tested. 5 Not suitable for DC application. Four-pole ground fault not available. 6 Available only on Digitrip 610 and 910 trip units. V4-T-10 Volume 4 Circuit Protection CA E February 01

11 Series G. General Specifications All Series G Frames 1 15 amperes is the maximum UL and CSA rating for the EG. 630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA rating for the LG amperes is the maximum UL and CSA rating for the NG. 4 Thermal overload release set to the lower value. 5 Thermal overload release set to the upper value. 6 Not suitable for DC switching. EG JG LG NG RG Maximum rated current I n depending on the version 160A 1 50A 400, 630A 800, 100, 1600A , 000, 500A Rated insulation voltage U, according to IEC Main conducting paths 500 Vac 750 Vac 750 Vac 750 Vac 750 Vac Auxiliary circuits 500 Vac 690 Vac 690 Vac 690 Vac 690 Vac Rated impulse withstand voltage U imp Main conducting paths 6 kv 8 kv 8 kv 8 kv 8 kv Auxiliary circuits 4 kv 4 kv 4 kv 4 kv 4 kv Rated operational voltage U e IEC 415 Vac 690 Vac 690 Vac 690 Vac 690 Vac NEMA 600Y/347 Vac 600 Vac 600 Vac 600 Vac 600 Vac UL and CSA listed Yes 1 Yes Yes Yes 3 Yes Permissible ambient temperature 0 to +70 C 0 to +70 C 0 to +70 C 5 to +60 C 5 to +60 C Permissible load for various ambient temperatures close to the circuit breaker, related to the rated current of the circuit breaker Circuit breakers for plant protection At 40 C 100% 100% 100% 100% 100% 100% 100% 100% At 50 C 96% 9% 96% 94% 96% 91% 91% 91% At 55 C 93% 87% 94% 90% 93% 86% 85% 85% At 60 C 91% 83% 9% 87% 90% 8% 81% 81% At 70 C 86% 73% 88% 80% 84% 70% Circuit breakers for motor protection At 40 C 100% 100% At 50 C 100% 100% At 55 C 100% 100% At 60 C 100% 100% At 70 C 90% 90% Circuit breakers for starter combinations and isolating circuit breakers At 40 C 100% 100% 100% 100% 100% At 50 C 100% 100% 100% 91% 91% At 55 C 96% 96% 95% 85% 85% At 60 C 91% 8% 90% 81% 81% At 70 C 86% 88% 84% Rated short-circuit breaking capacity (DC) Not for circuit breakers for motor protection (Time constant t = 10 rms) Two conducting paths in series 4 ka max. 4 ka max. 4 ka max. 6 6 For EG to LG up to 50 Vdc NEMA (time constant t = 8 rms) Two conducting paths in series 50 Vdc 4 ka max. 4 ka max. 4 ka max. 6 6 Volume 4 Circuit Protection CA E February 01 V4-T-11

12 . Series G All Series G Frames, continued EG JG LG NG RG Main switch characteristics according to IEC in combination with lockable rotary drives Yes Yes Yes Yes Yes Rated short circuit breaking capacity according to For rated short circuit breaking capacity, see Page V4-T-9. IEC (at AC 50/60 Hz) Endurance (operating cycles) 10,000 10,000 8,000 3,000 3,000 Maximum switching frequency 300 1/h 40 1/h 40 1/h 60 1/h 60 1/h Conductor cross sections and terminal types for main conductors Box terminals Box terminals Box terminals Flat bar terminals Flat bar terminals Flat bar terminals Solid or stranded.5 to 95 mm 50 to 150 mm 95 to 40 mm Finely stranded with end sleeve.5 to 50/70 mm 35 to 10 mm 70 to 150 mm Bus bar 600A Optional Optional Tightening torque for box terminals 5.6 Nm 0 Nm 4 Nm 31 Nm 31 Nm Tightening torque for bus bar connection pieces 5.6 Nm 15 Nm 30 Nm 6 Nm 50 Nm 0 Nm Conductor cross sections for auxiliary circuits with terminal connection or terminal strip Solid 0.75 to.5 mm 0.75 to.5 mm 0.75 to.5 mm Up to x4 mm Up to x4 mm Finely stranded with end sleeve 0.75 to.5 mm 0.75 to.5 mm 0.75 to.5 mm Up to x.5 mm Up to x.5 mm With brought-out cable ends 0.8 (AWG 18) mm 0.8 (AWG 18) mm 0.8 (AWG 18) mm 0.8 (AWG 18) mm Tightening torque for fitting screws 0.8 to 1.4 Nm 0.8 to 1.4 Nm 0.8 to 1.4 Nm 0.8 to 1.4 Nm Power loss per circuit breaker at maximum rated current l n (the power losses of the undervoltage releases ( r releases) must be observed if necessary) at three-phase symmetrical load) 400A: 600A: For plant protection 40W 45W 65W 10W 87/10W 0/70/400W As isolating circuit breaker 40W 45W 65W 10W 87/10W 0/70/400W For starter combinations 40W 45W 65W 10W For motor protection 45W 65W 10W Permissible mounting position 90 Arc spacing suitable for reverse-feed applications Yes (except HMCPE) Yes Yes Yes Yes Auxiliary Switches Rated thermal current l th 6A 6A 6A 6A 6A Rated making capacity 0A 0A 0A 0A 0A AC-14 AC-14 AC-14 AC-15 AC-15 Rated operational voltage 30/400/600V 30/400/600V 30/400/600V 600V 600V Rated operational current 6/3/0.5A 6/3/0.5A 6/3/0.5A 6A 6A DC-13 DC-13 Rated operational voltage 15/50V 15/50V 15/50V 15/50V 15/50V Rated operational current 0.5/0.15A 0.5/0.15A 0.5/0.15A 0.5/0.5A 0.5/0.5A Backup fuse 6/4/4A (4) 6/4/4A (4) 6/4/4A (4) 6/4/4A (4) 6/4/4A Miniature circuit breaker 6/4A 6/4A 6/4A 6/4A 6/4A V4-T-1 Volume 4 Circuit Protection CA E February 01

13 Series G. All Series G Frames, continued EG JG LG NG RG Releases Undervoltage releases ( r releases) Response voltage: Drop (breaker tripped) U s 35 70% 35 70% 35 70% 35 70% 35 70% Pickup (breaker may be switched on) U s % % % % % Power consumption in continuous operation at: 50/60 Hz 1 Vac 1.9 VA.9 VA 50/60 Hz 4 Vac 0.7 VA 3.9 VA 3.9 VA.4 VA 3.1 VA 50/60 Hz Vac VA VA VA VA VA 50/60 Hz Vac VA VA VA VA VA 50/60 Hz Vac VA VA VA VA VA 50/60 Hz Vac. 3.9 VA VA VA VA VA 50/60 Hz Vac VA VA VA 1 Vdc.6W 3.4W 4 Vdc 0.70W 3.1W 3.1W 3.6W 4.3W Vdc W.0 3.1W.0 3.1W W W Vdc W 1.6.W 1.6.W.9 3.6W W 0 50 Vdc W 3.1 4W 3.1 4W W W Maximum opening time 50 ms 50 ms 50 ms 6 ms 6 ms Shunt Trips Shunt trips ( f releases) Response voltage: Pickup (breaker tripped) U s % % % % % Power consumption in (short time) at: 50/60 Hz 4 Vac VA VA VA VA 61 VA 50/60 Hz Vac VA VA VA 4 50 VA VA 50/60 Hz Vac 50/60 Hz Vac VA VA VA VA VA 50/60 Hz Vac VA VA VA VA 50/60 Hz Vac VA 50/60 Hz Vac VA VA 19 4 VA VA 1 4 Vdc 9 10W W W W 396W Vdc W W W 67 10W W Vdc 99 11W W W W W 0 50 Vdc 40 58W 40 58W 46 55W W Maximum load duration Interrupts automatically Interrupts automatically Interrupts automatically Interrupts automatically Interrupts automatically Maximum opening time 50 ms 50 ms 50 ms 6 ms 6 ms Molded Case Switch (with High Magnetic Trip) Unfused kaic at 480 Vac (415 Vac) 65 (70) 65 (70) 65 (70) 65 (70) 65 (70) Self-protected, will trip above 150 for EG15; 1600 for EG /6300 1,500 0,000 Volume 4 Circuit Protection CA E February 01 V4-T-13

14 . Series G Dimensions and Weights Approximate Dimensions in Inches (mm) Series G Frame EG, JG and LG EG JG LG H W D H W D H W D Single-pole 5.50 (139.7) 1.00 (5.4).99 (76.0) Two-pole 5.50 (139.7).00 (50.8).99 (76.0) 7.00 (177.8) 4.13 (105.0) 3.57 (87.4) Three-pole 5.50 (139.7) 3.00 (76.).99 (76.0) 7.00 (177.8) 4.13 (105.0) 3.57 (87.4) (58.0) 5.48 (140.0) 4.09 (104.0) Four-pole 5.50 (139.7) 4.00 (101.6).99 (76.0) 7.00 (177.8) 5.34 (135.6) 3.57 (87.4) (58.0) 7. (183.0) 4.09 (104.0) Series G Frame NG and RG NG RG H W D H W D Single-pole Two-pole Three-pole (406.0) 8.5 (10.0) 5.50 (140.0) (406.0) (394.0) 9.75 (9.0) Four-pole (406.0) (80.0) 5.50 (140.0) (406.0) 0.00 (508.0) 9.75 (9.0) Approximate Shipping Weight in Lbs (kg) Series G Frame EG, JG and LG EG JG LG NG RG Single-pole 0.85 (0.39) Two-pole 1.57 (0.71) 11.3 (5.13) Three-pole.8 (1.04) 5.06 (.30) T/M 1.36 (5.61) T/M 46.8 (1.3) (47.0) 5.31 (.41) ETU (5.9) ETU Four-pole.85 (1.9) 6.76 (3.07) T/M 7.1 (3.3) ETU 16.7 (7.39) T/M 16.9 (7.68) ETU 6.0 (8.3) (54.0) V4-T-14 Volume 4 Circuit Protection CA E February 01

15 Series G. EG-Frame (15 15 Amperes) EG-Frame (15 15 Amperes) Product Description EG breaker is HACR rated. Contents Description Page EG-Frame (15 15 Amperes) Selection V4-T-16 Product Selection V4-T-17 Accessories V4-T-6 Technical Data and Specifications V4-T-7 Dimensions and Weights V4-T-7 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Volume 4 Circuit Protection CA E February 01 V4-T-15

16 . Series G Selection Series G EG-Frame (15 15 Amperes) E Frame Standard/Application G = IEC/CE/UL/CSA Performance 600Y/ B E S H C K Molded case switch 1 Cannot be UL rated. Available only as 15 and 160A sizes. of Poles 1 = One = Two 3 = Three 4 = Four Neutral 0% Protected 7 = Four Neutral 100% Protected E G H FF G Amperes Terminations/Hardware Terminals Mounting Hardware M = Metric end caps E = Imperial end caps G = Line/load standard B = Bolt-on Trip Unit FF = Fixed fixed AF = Adj. fixed KS = Molded case switch Metric Imperial Metric V4-T-16 Volume 4 Circuit Protection CA E February 01

17 Series G. Product Selection Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC at 415/480 Volts EG-Frame EG-Frame 18/18 Single-Pole Two-Pole Three-Pole Four-Pole 3 Maximum Continuous Amps at 40 C 1 Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 1 16, 3, 63 and 160A are not UL listed ratings. Adjustable thermal are not UL listed. 3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side. Adjustable Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable Thermal, Fixed Magnetic 15 EGB1015FFG EGB015FFG EGB3015FFG EGB4015FFG 16 EGB1016FFG EGB016FFG EGB3016FFG EGB4016FFG 0 EGB100FFG EGB00FFG EGB300FFG EGB400FFG EGB400AFG 5 EGB105FFG EGB05FFG EGB305FFG EGB305AFG EGB405FFG EGB405AFG 30 EGB1030FFG EGB030FFG EGB3030FFG EGB4030FFG 3 EGB103FFG EGB03FFG EGB303FFG EGB303AFG EGB403FFG EGB403AFG 35 EGB1035FFG EGB035FFG EGB3035FFG EGB4035FFG 40 EGB1040FFG EGB040FFG EGB3040FFG EGB3040AFG EGB4040FFG EGB4040AFG 45 EGB1045FFG EGB045FFG EGB3045FFG EGB4045FFG 50 EGB1050FFG EGB050FFG EGB3050FFG EGB3050AFG EGB4050FFG EGB4050AFG 60 EGB1060FFG EGB060FFG EGB3060FFG EGB4060FFG 63 EGB1063FFG EGB063FFG EGB3063FFG EGB3063AFG EGB4063FFG EGB4063AFG 70 EGB1070FFG EGB070FFG EGB3070FFG EGB4070FFG 80 EGB1080FFG EGB080FFG EGB3080FFG EGB3080AFG EGB4080FFG EGB4080AFG 90 EGB1090FFG EGB090FFG EGB3090FFG EGB4090FFG 100 EGB1100FFG EGB100FFG EGB3100FFG EGB3100AFG EGB4100FFG EGB4100AFG 15 EGB115FFG EGB15FFG EGB315FFG EGB315AFG EGB415FFG EGB415AFG 160 EGB3160FFG EGB3160AFG EGB4160FFG EGB4160AFG Volume 4 Circuit Protection CA E February 01 V4-T-17

18 . Series G EG-Frame 5/5 Single-Pole Unavailable EG-Frame EG-Frame 5/5 Two-Pole Three-Pole Four-Pole 3 Maximum Continuous Amps at 40 C 1 Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 1 16, 3, 63 and 160A are not UL listed ratings. Adjustable thermal are not UL listed. 3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side. Adjustable Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 15 EGE015FFG EGE3015FFG EGE4015FFG 16 EGE016FFG EGE3016FFG EGE4016FFG Adjustable Thermal, Fixed Magnetic 0 EGE00FFG EGE300FFG EGE400FFG EGE400AFG 5 EGE05FFG EGE305FFG EGE305AFG EGE405FFG EGE405AFG 30 EGE030FFG EGE3030FFG EGE4030FFG 3 EGE03FFG EGE303FFG EGE303AFG EGE403FFG EGE403AFG 35 EGE035FFG EGE3035FFG EGE4035FFG 40 EGE040FFG EGE3040FFG EGE3040AFG EGE4040FFG EGE4040AFG 45 EGE045FFG EGE3045FFG EGE3050AFG EGE4045FFG 50 EGE050FFG EGE3050FFG EGE4050FFG EGE4050AFG 60 EGE060FFG EGE3060FFG EGE4060FFG 63 EGE063FFG EGE3063FFG EGE3063AFG EGE4063FFG EGE4063AFG 70 EGE070FFG EGE3070FFG EGE4070FFG 80 EGE080FFG EGE3080FFG EGE3080AFG EGE4080FFG EGE4080AFG 90 EGE090FFG EGE3090FFG EGE4090FFG 100 EGE100FFG EGE3100FFG EGE3100AFG EGE4100FFG EGE4100AFG 15 EGE15FFG EGE315FFG EGE315AFG EGE415FFG EGE415AFG 160 EGE3160FFG EGE3160AFG EGE4160FFG EGE4160AFG V4-T-18 Volume 4 Circuit Protection CA E February 01

19 Series G. EG-Frame EG-Frame 40/35 Single-Pole Two-Pole Three-Pole Four-Pole 3 Maximum Continuous Amps at 40 C 1 Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 1 16, 3, 63 and 160A are not UL listed ratings. Adjustable thermal are not UL listed. 3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side. Adjustable Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable Thermal, Fixed Magnetic 15 EGS1015FFG EGS015FFG EGS3015FFG EGS4015FFG 16 EGS1016FFG EGS016FFG EGS3016FFG EGS4016FFG 0 EGS100FFG EGS00FFG EGS300FFG EGS400FFG EGS400AFG 5 EGS105FFG EGS05FFG EGS305FFG EGS305AFG EGS405FFG EGS405AFG 30 EGS1030FFG EGS030FFG EGS3030FFG EGS4030FFG 3 EGS103FFG EGS03FFG EGS303FFG EGS303AFG EGS403FFG EGS403AFG 35 EGS1035FFG EGS035FFG EGS3035FFG EGS4035FFG 40 EGS1040FFG EGS040FFG EGS3040FFG EGS3040AFG EGS4040FFG EGS4040AFG 45 EGS1045FFG EGS045FFG EGS3045FFG EGS4045FFG 50 EGS1050FFG EGS050FFG EGS3050FFG EGS3050AFG EGS4050FFG EGS4050AFG 60 EGS1060FFG EGS060FFG EGS3060FFG EGS4060FFG 63 EGS1063FFG EGS063FFG EGS3063FFG EGS3063AFG EGS4063FFG EGS4063AFG 70 EGS1070FFG EGS070FFG EGS3070FFG EGS4070FFG 80 EGS1080FFG EGS080FFG EGS3080FFG EGS3080AFG EGS4080FFG EGS4080AFG 90 EGS1090FFG EGS090FFG EGS3090FFG EGS4090FFG 100 EGS1100FFG EGS100FFG EGS3100FFG EGS3100AFG EGS4100FFG EGS4100AFG 15 EGS115FFG EGS15FFG EGS315FFG EGS315AFG EGS415FFG EGS415AFG 160 EGS3160FFG EGS3160AFG EGS4160FFG EGS4160AFG Volume 4 Circuit Protection CA E February 01 V4-T-19

20 . Series G EG-Frame EG-Frame 70/65 Single-Pole Two-Pole Three-Pole Four-Pole 3 Maximum Continuous Amps at 40 C 1 Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 1 16, 3, 63A are not UL listed ratings. Adjustable thermal are not UL listed. 3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side. Adjustable Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable Thermal, Fixed Magnetic 15 EGH1015FFG EGH015FFG EGH3015FFG EGH4015FFG 16 EGH1016FFG EGH016FFG EGH3016FFG EGH4016FFG 0 EGH100FFG EGH00FFG EGH300FFG EGH300AFG EGH400FFG EGH400AFG 5 EGH105FFG EGH05FFG EGH305FFG EGH305AFG EGH405FFG EGH405AFG 30 EGH1030FFG EGH030FFG EGH3030FFG EGH4030FFG 3 EGH103FFG EGH03FFG EGH303FFG EGH303AFG EGH403FFG EGH403AFG 35 EGH1035FFG EGH035FFG EGH3035FFG EGH4035FFG 40 EGH1040FFG EGH040FFG EGH3040FFG EGH3040AFG EGH4040FFG EGH4040AFG 45 EGH1045FFG EGH045FFG EGH3045FFG EGH4045FFG EGH4050AFG 50 EGH1050FFG EGH050FFG EGH3050FFG EGH3050AFG EGH4050FFG 60 EGH1060FFG EGH060FFG EGH3060FFG EGH4060FFG 63 EGH1063FFG EGH063FFG EGH3063FFG EGH3063AFG EGH4063FFG EGH4063AFG 70 EGH1070FFG EGH070FFG EGH3070FFG EGH4070FFG 80 EGH1080FFG EGH080FFG EGH3080FFG EGH3080AFG EGH4080FFG EGH4080AFG 90 EGH1090FFG EGH090FFG EGH3090FFG EGH4090FFG 100 EGH1100FFG EGH100FFG EGH3100FFG EGH3100AFG EGH4100FFG EGH4100AFG 15 EGH115FFG EGH15FFG EGH315FFG EGH315AFG EGH415FFG EGH415AFG V4-T-0 Volume 4 Circuit Protection CA E February 01

21 Series G. EG-Frame 100/100 Current Limiting (Single-Pole and Two-Pole Unavailable) EG-Frame EG-Frame 100/100 Maximum Continuous Amps at 40 C 1 Molded Case Switches 4 EGK315KSG EGK715KSG EGK3160KSG EGK7160KSG 1 16, 3, 63A are not UL listed ratings. Adjustable thermal is not UL listed. 3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on LH side. 4 Molded case switches may open above 150A. Three-Pole Four-Pole 0% Protected Neutral 3 Fixed Thermal, Fixed Magnetic Adjustable Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic 15 EGC3015FFG EGC7015FFG Adjustable Thermal, Fixed Magnetic 16 EGC3016FFG EGC7016FFG 0 EGC300FFG EGC300AFG EGC700FFG EGC700AFG 5 EGC305FFG EGC305AFG EGC705FFG EGC705AFG 30 EGC3030FFG EGC7030FFG 3 EGC303FFG EGC303AFG EGC703FFG EGC703AFG 35 EGC3035FFG EGC7035FFG 40 EGC3040FFG EGC3040AFG EGC7040FFG EGC7040AFG 45 EGC3045FFG EGC7045FFG 50 EGC3050FFG EGC3050AFG EGC7050FFG EGC7050AFG 60 EGC3060FFG EGC7060FFG 63 EGC3063FFG EGC3063AFG EGC7063FFG EGC7063AFG 70 EGC3070FFG EGC7070FFG 80 EGC3080FFG EGC3080AFG EGC7080FFG EGC7080AFG 90 EGC3090FFG EGC7090FFG 100 EGC3100FFG EGC3100AFG EGC7100FFG EGC7100AFG 15 EGC315FFG EGC315AFG EGC715FFG EGC715AFG Volume 4 Circuit Protection CA E February 01 V4-T-1

22 . Series G EG Bolt-On Complete Breaker (Includes Frame, Trip Unit and Mounting Hardware) EG-Frame EG-Frame EG-Frame 18 kaic at 480 Vac Single-Pole Two-Pole Three-Pole Maximum Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Continuous Amps at 40 C EGB1015FFB EGB015FFB EGB3015FFB 0 EGB100FFB EGB00FFB EGB300FFB 5 EGB105FFB EGB05FFB EGB305FFB 30 EGB1030FFB EGB030FFB EGB3030FFB 35 EGB1035FFB EGB035FFB EGB3035FFB 40 EGB1040FFB EGB040FFB EGB3040FFB 45 EGB1045FFB EGB045FFB EGB3045FFB 50 EGB1050FFB EGB050FFB EGB3050FFB 60 EGB1060FFB EGB060FFB EGB3060FFB 63 EGB1070FFB EGB070FFB EGB3070FFB 70 EGB1080FFB EGB080FFB EGB3080FFB 90 EGB1090FFB EGB090FFB EGB3090FFB 100 EGB1100FFB EGB100FFB EGB3100FFB 110 EGB1110FFB EGB110FFB EGB3110FFB 15 EGB115FFB EGB15FFB EGB315FFB EG-Frame 35 kaic at 480 Vac Single-Pole Two-Pole Three-Pole Maximum Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Continuous Amps at 40 C EGS1015FFB EGS015FFB EGS3015FFB 0 EGS100FFB EGS00FFB EGS300FFB 5 EGS105FFB EGS05FFB EGS305FFB 30 EGS1030FFB EGS030FFB EGS3030FFB 35 EGS1035FFB EGS035FFB EGS3035FFB 40 EGS1040FFB EGS040FFB EGS3040FFB 45 EGS1045FFB EGS045FFB EGS3045FFB 50 EGS1050FFB EGS050FFB EGS3050FFB 60 EGS1060FFB EGS060FFB EGS3060FFB 70 EGS1070FFB EGS070FFB EGS3070FFB 80 EGS1080FFB EGS080FFB EGS3080FFB 90 EGS1090FFB EGS090FFB EGS3090FFB 100 EGS1100FFB EGS100FFB EGS3100FFB 110 EGS1110FFB EGS110FFB EGS3110FFB 15 EGS115FFB EGS15FFB EGS315FFB 1 For bulk pack 4, add suffix BP4 and order quantities of 4. For bulk pack 1, add suffix BP1 and order quantities of 1. 3 For bulk pack 8, add suffix BP8 and order quantities of 8. V4-T- Volume 4 Circuit Protection CA E February 01

23 Series G. EG-Frame EG-Frame 65 kaic at 480 Vac Single-Pole Two-Pole Three-Pole Maximum Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Continuous Amps at 40 C EGH1015FFB EGH015FFB EGH3015FFB 0 EGH100FFB EGH00FFB EGH300FFB 5 EGH105FFB EGH05FFB EGH305FFB 30 EGH1030FFB EGH030FFB EGH3030FFB 35 EGH1035FFB EGH035FFB EGH3035FFB 40 EGH1040FFB EGH040FFB EGH3040FFB 45 EGH1045FFB EGH045FFB EGH3045FFB 50 EGH1050FFB EGH050FFB EGH3050FFB 60 EGH1060FFB EGH060FFB EGH3060FFB 70 EGH1070FFB EGH070FFB EGH3070FFB 80 EGH1080FFB EGH080FFB EGH3080FFB 90 EGH1090FFB EGH090FFB EGH3090FFB 100 EGH1100FFB EGH100FFB EGH3100FFB 110 EGH1110FFB EGH110FFB EGH3110FFB 15 EGH115FFB EGH15FFB EGH315FFB Load Terminals Maximum Breaker Amps Terminal, Body Material Wire Type 1 For bulk pack 4, add suffix BP4 and order quantities of 4. For bulk pack 1, add suffix BP1 and order quantities of 1. 3 For bulk pack 8, add suffix BP8 and order quantities of 8. Metric Wire Range mm AWG Wire Range Standard Cu/Al Pressure Type Terminals Aluminum Cu/Al.5 50 #14 1/0 3TA15EF Aluminum Cu/Al #6 3/0 3TA150EF (Package of Three Terminals) Volume 4 Circuit Protection CA E February 01 V4-T-3

24 . Series G Accessories Selection Guide and Ordering Information EG-Frame 3T15EF 3TA15EF 3TA150EF 3TA160EFK EFRTWK, Two-Pole Metric EF3RTWK, Three-Pole Metric EF4RTWK, Four-Pole Metric EFRTDK, Two-Pole Imperial EF3RTDK, Three-Pole Imperial EF4RTDK, Four-Pole Imperial Control Wire Terminal Kit GCWTK Multiwire Connectors Line and Load Terminals Maximum Breaker Amps Terminal Body Material Standard Cu/Al Pressure Type Terminals Wire Type Metric Wire Range mm AWG Wire Range (Package of Three Terminals) 15 Steel Cu/Al.5 4 # T15EF 1 15 Steel Cu.5 95 #14-3/0 3T15EF 1 15 Aluminum Cu/Al.5 50 #14-1/0 3TA15EF 160 Aluminum Cu/Al #6-3/0 3TA150EF 160 Aluminum Cu/Al #3-50 3TA160EFK 160 Aluminum Cu/Al #3-50 4TA160EFK EG-Frame circuit breakers and molded case switches have line and load terminals as standard equipment. Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: Collar must surround conductor. Insert collar enclosing conductor and center on extrusion. Tighten securely with screw and washer. Endcap kits are used on the E-Frame breaker line side to connect bus bar or similar electrical connections. Includes hardware. 1 Standard line and load terminals. Four-pole kit with four terminals. V4-T-4 Volume 4 Circuit Protection CA E February 01

25 Series G. Control Wire Terminal Kit Control wire terminal kit Package of 1 priced individually For use with steel or stainless steel standard line and load terminals only. Interphase Barriers Interphase barriers Package of 1 priced individually The interphase barrier is available for extended insulation between circuit breaker poles. Specify quantity when ordering. Base Mounting Hardware DIN Rail Mounting DIN rail adapter two-, three-, four-pole Single-pole DIN rail adapter three- or four-pole Metric base mounting hardware is included with a circuit breaker or molded case switch. (Included with breaker.) If required separately, order S/N 8703C80G08. Note: English mounting hardware kit can be supplied separate. number is BMHE #6 3 x 3 inches for two-, three- and four-pole. Singlepole mounting hardware metric order 8703C80G11. English hardware 8703C80G1. Both sold in quantities of 100. Terminal Shields The terminal shield is available for line terminal areas in threeand four-pole circuit breakers. Special terminal shields are also available for use when an electrical (solenoid) operator is mounted on the circuit breaker. The standard style number by pole for each terminal shield is for a package of 10 and is priced per each package. Special terminal shields are packaged individually. Terminal Shields IP30 Protection of Poles 565B38G01 EIPBK EGDIN EF1DIN EG34DIN 3 EFTS3K 4 EFTS4K Terminal End Covers (Gas Barrier) The terminal end cover is available for three-pole circuit breakers only. Two conductor opening sizes are available. Specify quantity (one per circuit breaker) when ordering. Terminal End Covers Conductor Opening Diameter Inches (mm) 6.35 (0.5) EEC3K (0.41) EEC4K Multiwire Connectors Field-installed multiwire connectors for the load side (OFF) end terminals. They are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks. Multiwire lug kits include mounting hardware, terminal shield insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed as used on the load side (OFF) end. EG-Frame Multiwire Connectors Ordering Information (Package of 3) 1 Maximum Amperes Wires per Terminal Wire Size Range AWG Cu Note 1 For four-pole kit, change 3 at beginning of catalog number to 4. Kit TA15E3K TA15E6K Volume 4 Circuit Protection CA E February 01 V4-T-5

26 . Series G Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. EG-Frame Accessories Single- Reference Pole Two-Pole Three-Pole Four-Pole Description Page Center Left Right Left Center Right Left Center Right Neutral Internal Accessories (Only one internal accessory per pole) Alarm lockout (Make/Break) V4-T-104 Alarm lockout (Make/Break) V4-T-104 Auxiliary switch (1A, 1B) V4-T-104 Auxiliary switch (A, B) V4-T-104 Auxiliary switch and alarm switch combination V4-T-104 Shunt trip standard V4-T-104 Undervoltage release mechanism V4-T-105 External Accessories End cap kit V4-T-5 Control wire terminal kit V4-T-5 Multiwire connectors V4-T-5 Base mounting hardware V4-T-5 Terminal shields V4-T-5 Terminal end covers V4-T-5 Interphase barriers V4-T-5 Non-padlockable handle block V4-T-10 Snap-on padlockable handle lock hasp V4-T-10 Padlockable handle lock hasp V4-T-10 Walking beam interlock requires two breakers V4-T-10 Plug-in adapters V4-T-10 Electrical operator V4-T-10 Handle mechanisms V4-T-110 Modifications (Refer to Eaton) Moisture fungus treatment V4-T-100 Freeze-tested circuit breakers Marine/naval application, UL 489 Supplement SA and SB Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available V4-T-6 Volume 4 Circuit Protection CA E February 01

27 Series G. Technical Data and Specifications UL 489/IEC Interrupting Capacity (Symmetrical Amperes) (ka) s Volts AC (50/60 Hz) Volts DC Circuit Breaker Type of Poles 10 I cu I cs I cu I cs Y/ 347 I cu I cs I cu I cs I cu I cs EGB , 3, EGE15, 3, EGS , 3, EGH , 3, EGC15 5 3, EGB160 3, EGE160 3, EGS160 3, Dimensions and Weights Approximate Dimensions in Inches (mm) EG-Frame of Poles Width Height Depth (5.4) 5.50 (139.7).99 (75.9).00 (50.8) 5.50 (139.7).99 (75.9) (76.) 5.50 (139.7).99 (75.9) (101.6) 5.50 (139.7).99 (75.9) EG-Frame Front Cover Cutout C L Breaker 0.14 (3.6) R 1.85 (47.0) 0.90 (.9) 1.30 Dia (11.9) (33.0) 0.94 (3.9) Approximate Shipping Weight in Lbs (kg) EG-Frame Breaker Type C L Handle Front View 3-Pole 3.00 (76.) 3.03 (77.0) of Poles Breaker Type 1 DC ratings apply to substantially non-inductive circuits. IEC only. 3 Two-pole circuit breaker, or two poles of three-pole circuit breaker. 4 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at 4 ka. 5 Current limiting per UL 489. Side View of Poles 3 4 EGB (0.68).0 (0.91) 3.0 (1.36) 4.9 (1.8) EGB (1.36) 4.9 (1.8) EGC (0.68).0 (0.91) 3.0 (1.36) 4.9 (1.8) EGE (1.36) 4.9 (1.8) EGE (0.68).0 (0.91) 3.0 (1.36) 4.9 (1.8) EGS (1.36) 4.9 (1.8) EGH (0.68).0 (0.91) 3.0 (1.36) 4.9 (1.8) EGS (0.68).0 (0.91) 3.0 (1.36) 4.9 (1.8).77 (70.4) 5.50 (139.7) Volume 4 Circuit Protection CA E February 01 V4-T-7

28 . Series G EG-Frame With Earth Leakage Module 10.6 (60.6) 4.75 (10.6) 0.55 (14.0) 0.50 (1.7) 1.00 (5.4) 1.00 (5.4) (38.1) (1.7) 1.49 (37.8).00 (50.8) 3-Pole.98 (75.7) 3.98 (101.1) 8.59 (18.) 4.78 (11.4) 0.70 (17.8) 0.90 (.9) 0.35 (8.9) 0.09 (.9) 0.78 (19.8).75 (69.9) 3.01 (76.5) 3.17 (80.5) EG-Frame With Current Limiter Module 0.56 (14.) 4.17 (105.9) 3.61 (91.7) 9.66 (45.4) 3.00 (76.) 1.00 (5.4) 1.00 (5.4) 1.00 (5.4) 0.50 (1.7) 3.0 (81.3) 4.17 (105.9).75 (69.9) 0.09 (.3) 0.41 (10.4) 0.78 (19.8) V4-T-8 Volume 4 Circuit Protection CA E February 01

29 Series G. JG-Frame (63 50 Amperes) JG-Frame (63 50 Amperes) Product Description JG breaker is HACR rated. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) Selection V4-T-30 Product Selection V4-T-31 Accessories V4-T-4 Technical Data and Specifications V4-T-43 Dimensions and Weights V4-T-43 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Volume 4 Circuit Protection CA E February 01 V4-T-9

30 . Series G Selection Series G JG-Frame (63 50 Amperes) Trip Unit J Frame Standard/Application G = IEC/CE/UL/CSA Performance E S H C U X K Molded case switch JT Trip J G S 3 50 FA G C of Poles = Two 3 = Three 4 = Four Neutral 0% Protected 8 = Four Neutral 0 60% Protected 9 = Four Neutral 100% Protected Amperes JT FA of Poles = Two 3 = Three 4 = Four Neutral 0% Protected 8 = Four Neutral 0 60%% Protected 9 = Four Neutral 100% Protected Amperes T/M ETU Blank = 80% rated C = 100% rated F01 = Freeze tested for 70ºF ( 57ºC) F0 = Freeze tested for ºF ( 30ºC) Terminations/Hardware Terminals Mounting Hardware M = Metric end caps E = Imperial end caps G = Line/load standard W = Without terminals Trip Unit AA = Adj. adj. FA = Fixed adj. KS = Molded case switch 33 = 310+ electronic LS 3 = 310+ electronic LSI 35 = 310+ electronic LSG 36 = 310+ electronic LSIG NN = Frame only (no trip) Trip Unit AA = Adj. adj. FA = Fixed adj. KS = Molded case switch 33 = 310+ electronic LS 3 = 310+ electronic LSI 35 = 310+ electronic LSG 36 = 310+ electronic LSIG NN = Frame only (no trip) Metric Imperial Metric V4-T-30 Volume 4 Circuit Protection CA E February 01

31 Series G. Product Selection Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC at 415/480 Volts JG-Frame JG-Frame JG-Frame IEC/CE/UL/CSA 5/5 Two-Pole Three-Pole Four-Pole 0% Maximum Continuous Amperes JG-Frame IEC/CE/UL/CSA 40/35, Two-Pole Two-Pole Three-Pole Four-Pole 0% Magnetic Range Fixed Thermal, Adjustable Magnetic Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 1 Fixed Thermal, Adjustable Magnetic JGE070FAG JGE3070FAG JGE4070FAG JGE090FAG JGE3090FAG JGE4090FAG 1 EC-EN only. Adjustment is 0.8 and 1.0. Change the fourth digit to 8 for adjustable 0 60% neutral protection, 9 for 0 100% neutral protection. Neutral is on LH side. Adjustable Thermal, Adjustable Magnetic JGE100FAG JGE3100FAG JGE3100AAG JGE4100FAG JGE4100AAG JGE15FAG JGE315FAG JGE315AAG JGE415FAG JGE415AAG JGE150FAG JGE3150FAG JGE4150FAG JGE3160AAG JGE4160AAG JGE175FAG JGE3175FAG JGE4175FAG JGE00FAG JGE300FAG JGE300AAG JGE400FAG JGE400AAG JGE5FAG JGE35FAG JGE45FAG JGE50FAG JGE350FAG JGE350AAG JGE450FAG JGE450AAG Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 1 Fixed Thermal, Adjustable Magnetic JGS070FAG JGS3070FAG JGS4070FAG JGS090FAG JGS3090FAG JGS4090FAG Adjustable Thermal, Adjustable Magnetic JGS100FAG JGS3100FAG JGS3100AAG JGS4100FAG JGS4100AAG JGS15FAG JGS315FAG JGS315AAG JGS415FAG JGS415AAG JGS150FAG JGS3150FAG JGS4150FAG JGS3160AAG JGS4160AAG JGS175FAG JGS3175FAG JGS4175FAG JGS00FAG JGS300FAG JGS300AAG JGS400FAG JGS400AAG JGS5FAG JGS35FAG JGS45FAG JGS50FAG JGS350FAG JGS350AAG JGS450FAG JGS450AAG Volume 4 Circuit Protection CA E February 01 V4-T-31

32 . Series G JG-Frame JG-Frame IEC/CE/UL/CSA 70/65 Two-Pole Three-Pole Four-Pole 0% Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Fixed Magnetic 1 1 EC-EN only. Adjustment is 0.8 and 1.0. Change the fourth digit to 8 for adjustable 0 60% neutral protection, 9 for 0 100% neutral protection. Neutral is on LH side. Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Fixed Magnetic JGH070FAG JGH3070FAG JGH4070FAG JGH090FAG JGH3090FAG JGH4090FAG JGH100FAG JGH3100FAG JGH3100AAG JGH4100FAG JGH4100AAG JGH15FAG JGH315FAG JGH315AAG JGH415FAG JGH415AAG JGH150FAG JGH3150FAG JGH4150FAG JGH3160AAG JGH4160AAG JGH175FAG JGH3175FAG JGH4175FAG JGH00FAG JGH300FAG JGH300AAG JGH400FAG JGH400AAG JGH5FAG JGH35FAG JGH45FAG JGH50FAG JGH350FAG JGH350AAG JGH450FAG JGH450AAG V4-T-3 Volume 4 Circuit Protection CA E February 01

33 Series G. Two-Pole not available in IEC/CE/UL/CSA 100/100, 150/150 JG-Frame JG-Frame JG-Frame IEC/CE/UL/CSA 100/100, Current Limiting Three-Pole Four-Pole 0% Maximum Continuous Amperes JG-Frame IEC/CE/UL/CSA 150/150, Current Limiting Three-Pole Four-Pole 0% Magnetic Range Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 1 Fixed Thermal, Adjustable Magnetic 1 EC-EN only. Adjustment is 0.8 and 1.0. Change the fourth digit to 8 for adjustable 0 60% neutral protection, 9 for 0 100% neutral protection. Neutral is on LH side. Adjustable Thermal, Adjustable Magnetic JGC3070FAG JGC4070FAG JGC3080AAG JGC4080AAG JGC3090FAG JGC4090FAG JGC3100FAG JGC3100AAG JGC4100FAG JGC4100AAG JGC315FAG JGC315AAG JGC415FAG JGC415AAG JGC3150FAG JGC4150FAG JGC3160AAG JGC4160AAG JGC3175FAG JGC4175FAG JGC300FAG JGC300AAG JGC400FAG JGC400AAG JGC35FAG JGC45FAG JGC350FAG JGC350AAG JGC450FAG JGC450AAG Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 1 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic JGU3070FAG JGU4070FAG JGU3080AAG JGU4080AAG JGU3090FAG JGU4090FAG JGU3100FAG JGU3100AAG JGU4100FAG JGU4100AAG JGU315FAG JGU315AAG JGU415FAG JGU415AAG JGU3150FAG JGU4150FAG JGU3160AAG JGU4160AAG JGU3175FAG JGU4175FAG JGU300FAG JGU300AAG JGU400FAG JGU400AAG JGU35FAG JGU45FAG JGU350FAG JGU350AAG JGU450FAG JGU450AAG Volume 4 Circuit Protection CA E February 01 V4-T-33

34 . Series G Two-Pole not available in IEC/CE/UL/CSA 00/00 JG-Frame JG-Frame IEC/CE/UL/CSA 00/00, Current Limiting Three-Pole Four-Pole Maximum Continuous Amperes Molded Case Switches 3 JGK350KSG JGK750KSG Magnetic Range 1 EC-EN only. Adjustment is 0.8 and 1.0. Change the fourth digit to 8 for adjustable 0 60% neutral protection, 9 for 0 100% neutral protection. Neutral is on LH side. 3 Molded case switches will trip above 500 amperes. Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 1 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic JGX3070FAG JGX4070FAG JGX3080AAG JGX4080AAG JGX3090FAG JGX4090FAG JGX3100FAG JGX3100AAG JGX4100FAG JGX4100AAG JGX315FAG JGX315AAG JGX415FAG JGX415AAG JGX3150FAG JGX4150FAG JGX3160AAG JGX4160AAG JGX3175FAG JGX4175FAG JGX300FAG JGX300AAG JGX400FAG JGX400AAG JGX35FAG JGX45FAG JGX350FAG JGX350AAG JGX450FAG JGX450AAG V4-T-34 Volume 4 Circuit Protection CA E February 01

35 Series G. Components Load and Line Terminals Maximum Breaker Amperes Frame IC at 415/480 Volts Two-Pole Three-Pole Four-Pole 0% Thermal-Magnetic Trip Unit Terminal Body Material Wire Type AWG Wire Range No. Conductors 1 Standard line and load terminals. Components 100% rated frame. 3 Adjustable thermal trip units are typically used in IEC markets and are not UL or CSA listed. Metric Wire Range mm Standard Cu/Al Pressure Type Terminals 50 Aluminum Cu/Al kcmil TA50FJ 50 Stainless steel Cu kcmil T50FJ 1 Maximum Amperes 5/5 50 JGE50NN JGE350NN JGE450NN 40/35 50 JGS50NN JGS350NN JGS450NN 70/65 50 JGH50NN JGH350NN JGH450NN 100/100 Current Limiting Per UL JGC350NN JGC450NN 150/150 Current Limiting Per UL JGU350NN JGU450NN 00/00 Current Limiting Per UL JGX350NN JGX450NN 5/5 100% Rated Per UL JGE350NNC 40/35 100% Rated Per UL JGS350NNC 70/65 100% Rated Per UL JGH350NNC Ampere Range Range JT070FA JT3070FA JT4070FA JT3080AA JT4080AA JT090FA JT3090FA JT4090FA JT100FA JT3100FA JT3100AA JT4100FA JT4100AA JT15FA JT315FA JT315AA JT415FA JT415AA JT150FA JT3150FA JT4150FA JT3160AA JT4160AA JT175FA JT3175FA JT4175FA JT00FA JT300FA JT300AA JT400FA JT400AA JT5FA JT35FA JT45FA JT50FA JT350FA JT350AA JT450FA JT450AA 3 Volume 4 Circuit Protection CA E February 01 V4-T-35

36 . Series G Electronic Trip Units JG Electronic Trip Units Ampere Plug-In Test Kit LS LSI LSG LSIG Breaker Mount Ammeter Description 1 For use on a three-pole breaker used in a four-wire system if ground fault protection for the neutral is required. Neutral protection 4 = 0%, 6 = 60%, 7 = 100% electronic trip unit neutral protection is not adjustable. Long time pickup selectable via dial setting. 50 ampere settings 50, 45, 40, 3, 30, 5, ampere settings 100, 90, 80, 70, 63, 50, 45, ampere settings 160, 150, 15, 110, 100, 90, 80, ampere settings 50, 5, 00, 175, 160, 150, 15, 100. Adjustable long time delay 4 seconds at 6 x lr. Adjustable short time delay Inst., 10, 300 ms Neutral CT for LSG and LSIG 1 Three-Pole 50 JT JT30503 JT JT JGFCT JT JT31003 JT JT JGFCT JT JT31603 JT JT JGFCT JT35033 JT3503 JT35035 JT35036 JGFCT50 Four-Pole 50 JT JT40503 JT JT JT JT41003 JT JT JT JT41603 JT JT JT45033 JT4503 JT45035 JT45036 Voltage 10 Vac MTST10V 30 Vac MTST30V Breaker mount ammeter DIGIVIEW V4-T-36 Volume 4 Circuit Protection CA E February 01

37 Series G. Complete Breaker with Electronic Trip Units IEC/UL/CSA 5/5 Ampere IEC/UL/CSA 40/35 IEC/UL/CSA 70/65 LS LSI LSG LSIG 1 Required for four-wire systems if neutral protection is required. Neutral protection 4 = 0%, 6 = 60%, 7 = 100% electronic trip unit neutral protection is not adjustable. Neutral CT for LSG and LSIG 1 Three-Pole 50 JGE305033G JGE30503G JGE305035G JGE305036G JGFCT JGE310033G JGE31003G JGE310035G JGE310036G JGFCT JGE316033G JGE31603G JGE316035G JGE316036G JGFCT JGE35033G JGE3503G JGE35035G JGE35036G JGFCT50 Four-Pole 50 JGE405033G JGE40503G JGE405035G JGE405036G 100 JGE410033G JGE41003G JGE410035G JGE410036G 160 JGE416033G JGE41603G JGE416035G JGE416036G 50 JGE45033G JGE4503G JGE45035G JGE45036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 Three-Pole 50 JGS305033G JGS30503G JGS305035G JGS305036G JGFCT JGS310033G JGS31003G JGS310035G JGS310036G JGFCT JGS316033G JGS31603G JGS316035G JGS316036G JGFCT JGS35033G JGS3503G JGS35035G JGS35036G JGFCT50 Four-Pole 50 JGS405033G JGS40503G JGS405035G JGS405036G 100 JGS410033G JGS41003G JGS410035G JGS410036G 160 JGS416033G JGS41603G JGS416035G JGS416036G 50 JGS45033G JGS4503G JGS45035G JGS45036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 Three-Pole 50 JGH305033G JGH30503G JGH305035G JGH305036G JGFCT JGH310033G JGH31003G JGH310035G JGH310036G JGFCT JGH316033G JGH31603G JGH316035G JGH316036G JGFCT JGH35033G JGH3503G JGH35035G JGH35036G JGFCT50 Four-Pole 50 JGH405033G JGH40503G JGH405035G JGH405036G 100 JGH410033G JGH41003G JGH410035G JGH410036G 160 JGH416033G JGH41603G JGH416035G JGH416036G 50 JGH45033G JGH4503G JGH45035G JGH45036G Volume 4 Circuit Protection CA E February 01 V4-T-37

38 . Series G IEC/UL/CSA 100/100, Current Limiting Per UL 489 Ampere IEC/UL/CSA 150/150, Current Limiting Per UL 489 IEC/UL/CSA 00/00, Current Limiting Per UL 489 LS LSI LSG LSIG 1 Required for four-wire systems if neutral protection is required. Neutral protection 4 = 0%, 6 = 60%, 7 = 100% electronic trip unit neutral protection is not adjustable. Neutral CT for LSG and LSIG 1 Three-Pole 50 JGC305033G JGC30503G JGC305035G JGC305036G JGFCT JGC310033G JGC31003G JGC310035G JGC310036G JGFCT JGC316033G JGC31603G JGC316035G JGC316036G JGFCT JGC335033G JGC3503G JGC35035G JGC35036G JGFCT50 Four-Pole 50 JGC405033G JGC40503G JGC405035G JGC405036G 100 JGC410033G JGC41003G JGC410035G JGC410036G 160 JGC416033G JGC41603G JGC416035G JGC416036G 50 JGC435033G JGC4503G JGC45035G JGC45036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 Three-Pole 50 JGU305033G JGU30503G JGU305035G JGU305036G JGFCT JGU310033G JGU31003G JGU310035G JGU310036G JGFCT JGU316033G JGU31603G JGU316035G JGU316036G JGFCT JGU335033G JGU3503G JGU35035G JGU35036G JGFCT50 Four-Pole 50 JGU405033G JGU40503G JGU405035G JGU405036G 100 JGU410033G JGU41003G JGU410035G JGU410036G 160 JGU416033G JGU41603G JGU416035G JGU416036G 50 JGU435033G JGU4503G JGU45035G JGU45036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 Three-Pole 50 JGX305033G JGX30503G JGX305035G JGX305036G JGFCT JGX310033G JGX31003G JGX310035G JGX310036G JGFCT JGX316033G JGX31603G JGX316035G JGX316036G JGFCT JGX35033G JGX3503G JGX35035G JGX35036G JGFCT50 Four-Pole 50 JGX405033G JGX40503G JGX405035G JGX405036G 100 JGX410033G JGX41003G JGX410035G JGX410036G 160 JGX416033G JGX41603G JGX416035G JGX416036G 50 JGX45033G JGX4503G JGX45035G JGX45036G V4-T-38 Volume 4 Circuit Protection CA E February 01

39 Series G. JG 100% Rated Circuit Breaker Thermal-Magnetic Trip Unit Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC at 415/480 Volts JG-Frame JG-Frame IEC/CE/UL/CSA 5/5 Three-Pole Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic JGE3070FAGC JGE3090FAGC JGE3100FAGC JGE315FAGC JGE3150FAGC JGE3175FAGC JGE300FAGC JGE35FAGC JGE350FAGC JG-Frame IEC/CE/UL/CSA 40/35 Three-Pole Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic JGS3070FAGC JGS3090FAGC JGS3100FAGC JGS315FAGC JGS3150FAGC JGS3175FAGC JGS300FAGC JGS35FAGC JGS350FAGC JG-Frame IEC/CE/UL/CSA 70/65 Three-Pole Maximum Continuous Amperes Magnetic Range Fixed Thermal, Adjustable Magnetic JGH3070FAGC JGH3090FAGC JGH3100FAGC JGH315FAGC JGH3150FAGC JGH3175FAGC JGH300FAGC JGH35FAGC JGH350FAGC Volume 4 Circuit Protection CA E February 01 V4-T-39

40 . Series G JG 100% Rated Electronic Trip Unit Circuit Breaker IEC/UL/CSA 5/5 Ampere IEC/UL/CSA 40/35 IEC/UL/CSA 70/65 Note LS LSI LSG LSIG 1 Required for four-wire systems if neutral protection is required. Neutral CT for LSG and LSIG 1 50 JGE305033GC JGE30503GC JGE305035GC JGE305036GC JGFCT JGE310033GC JGE31003GC JGE310035GC JGE310036GC JGFCT JGE316033GC JGE31603GC JGE316035GC JGE316036GC JGFCT JGE35033GC JGE3503GC JGE35035GC JGE35036GC JGFCT50 Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 50 JGS305033GC JGS30503GC JGS305035GC JGS305036GC JGFCT JGS310033GC JGS31003GC JGS310035GC JGS310036GC JGFCT JGS316033GC JGS31603GC JGS316035GC JGS316036GC JGFCT JGS35033GC JGS3503GC JGS35035GC JGS35036GC JGFCT50 Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 50 JGH305033GC JGH30503GC JGH305035GC JGH305036GC JGFCT JGH310033GC JGH31003GC JGH310035GC JGH310036GC JGFCT JGH316033GC JGH31603GC JGH316035GC JGH316036GC JGFCT JGH35033GC JGH3503GC JGH35035GC JGH35036GC JGFCT50 V4-T-40 Volume 4 Circuit Protection CA E February 01

41 Series G. Accessories Selection Guide and Ordering Information JG-Frame T50FJ TA50FJ Endcap Kit Control Wire Terminal Kit Load and Line Terminals Maximum Breaker Amperes JG-Frame circuit breakers include stainless steel terminals T50FJ as standard. When optional copper only terminals are required, order by catalog number. Endcap Kits Terminal Body Material Wire Type Metric Wire Range mm Endcap kits are used on J50-Frame breaker to connect bus bar or similar electrical connections. Includes hardware. Control Wire Terminal Kit For use with aluminum or copper terminals only. Base Mounting Hardware Base mounting hardware is included with a circuit breaker or molded case switch. (Included with breaker.) If required separately, order 66A546G0. Terminal Shields IP30 Location of Poles Multiwire Connectors Field-installed multiwire connectors for the load side (OFF) end terminals. They are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks. Multiwire lug kits include terminal shield, mounting hardware, insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed as used on the load side (OFF) end. AWG Wire Range/ of Conductors Multiwire Connectors Standard Pressure Type Terminals 50 Stainless steel Cu #4 350 (1) T50FJ 1 50 Aluminum Cu/Al #4 350 (1) TA50FJ 1 of Poles Metric Imperial 3 FJ3RTWK FJ3RTDK 4 FJ4RTWK FJ4RTDK Line or Load, 3 FJTS3K 4 FJTS4K Description Package of 14 (priced individually) Interphase Barriers of Poles JG-Frame Multiwire Connectors Ordering Information (Package of 3) 1 Individually packed. Standard line and load. 3 Individually priced. FJCWTK 3 FJIPBK 3 4 FJIPBK4 3 Maximum Amperes Wires per Terminal Wire Size Range AWG Cu Kit TA50FJ TA50FJ6 Volume 4 Circuit Protection CA E February 01 V4-T-41

42 . Series G Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. JG-Frame Accessories Reference Two- and Three-Pole Four-Pole Description Page Left Center Right Left Center Right Neutral Internal Accessories (Only one internal accessory per pole) Alarm lockout (Make/Break) V4-T-104 Auxiliary switch (1A, 1B) V4-T-104 Auxiliary switch (A, B) V4-T-104 Auxiliary switch and alarm switch combination V4-T-104 Shunt trip standard V4-T-104 Undervoltage release mechanism V4-T-105 External Accessories End cap kit V4-T-41 Control wire terminal kit V4-T-41 Multiwire connectors V4-T-41 Base mounting hardware V4-T-41 Interphase barriers V4-T-41 Padlockable handle block V4-T-10 Padlockable handle lock hasp V4-T-10 Key interlock kit V4-T-10 Sliding bar interlock requires two breakers V4-T-10 Electrical operator V4-T-10 Plug-in adapters V4-T-10 Handle mechanisms V4-T-110 Earth leakage/ground fault protector V4-T-89 Drawout cassette V4-T-109 Digitrip 310+ test kit V4-T-35 Ammeter/cause of trip display V4-T-101 Cause of trip LED module V4-T-101 Modifications (Refer to Eaton) Moisture fungus treatment V4-T-100 Freeze-tested circuit breakers Marine/naval application, UL 489 supplement SA and SB 1 Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Note 1 Contact Eaton. V4-T-4 Volume 4 Circuit Protection CA E February 01

43 Series G. Technical Data and Specifications UL 489/IEC Interrupting Capacity (Symmetrical Amperes) (ka) s Volts AC (50/60 Hz) Volts DC Circuit Breaker Type of Poles I cu I cs I cu I cs I cu I cs 50 3 JGE50, 3, JGS50, 3, JGH50, 3, JGC50 4 3, JGU50 4 3, JGX50 4 3, Dimensions and Weights Approximate Dimensions in Inches (mm) JG-Frame of Poles Width Height Depth, (104.9) 7.00 (177.8) 3.57 (90.7) (135.6) 7.00 (177.8) 3.57 (90.7) JG-Frame Front Cover Cutout C L 0.63 (16.0) Breaker 1.5 (31.8) 0.8 (7.1) 0.19 (4.8) R 3.06 (77.7).05 (5.1) 0.50 (1.7) Approximate Shipping Weight in Lbs (kg) JG-Frame Breaker Type 4.00 (101.6) 1.06 (7.0) C L Handle of Poles, 3 4 Front View 3-Pole 4.13 (104.9) JGC 6.00 (.70) 8.00 (3.60) JGE 6.00 (.70) 8.00 (3.60) JGH 6.00 (.70) 8.00 (3.60) JGS 6.00 (.70) 8.00 (3.60) JGU 6.00 (.70) 8.00 (3.60) JGX 6.00 (.70) 8.00 (3.60) 3.95 (100.3) 1 DC ratings apply to substantially non-inductive circuits. Two-pole circuit breaker, or two poles of three-pole circuit breaker. 3 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 4 Current limiting per UL 489. Side View 3.44 (87.4) 7.00 (177.8) Volume 4 Circuit Protection CA E February 01 V4-T-43

44 . Series G JG-Frame With Earth Leakage Module 4-Pole 5.50 (139.7) 3-Pole 4.13 (104.9) 0.69 (17.5) 1.38 (35.1).06 (5.3) 3.57 (90.7) 5.50 (139.7) 1.5 (31.8).05 (5.1) 0.63 (16.0) 3.9 (99.6) 5.50 (139.7) 7.00 (177.8) 3.9 (99.6) R 0.19 (4.8) 0.8 (7.1) 1.88 (47.8) 4.93 (15.) 6.97 (177.0) 11.5 (85.8) 11.5 (85.8) 0.50 (139.7) 1.06 (6.9) RESET TEST 4.5 (108.0) 3.37 (85.6) 3.31 (84.1) 3.69 (93.7) 4.78 (11.4) 3.57 (90.7) 3.81 (96.8).05 (5.1) 4.09 (103.9) V4-T-44 Volume 4 Circuit Protection CA E February 01

45 Series G. LG-Frame ( Amperes) LG-Frame ( Amperes) Product Description LG breaker is HACR rated. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) Selection V4-T-46 Product Selection V4-T-47 Accessories V4-T-58 Technical Data and Specifications V4-T-59 Dimensions and Weights V4-T-59 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Volume 4 Circuit Protection CA E February 01 V4-T-45

46 . Series G Selection Series G LG-Frame ( Amperes) Trip Unit L Frame Standard/Application G = IEC/CE/UL/CSA Performance E S H C U X K Molded case switch LT Trip L G S FA G C of Poles 3 = Three 4 = Four Neutral 0% protected 6 = Four Neutral 60% protected 7 = Four Neutral 100% protected 8 = Four Neutral 0 60% protected 9 = Four Neutral protected of Poles 3 = Three 4 = Four neutral 0% protected 8 = Four neutral 0/60% protected 9 = Four neutral 0/100% protected LT FA Amperes Amperes Blank = 80% rated C = 100% rated Terminations/Hardware Terminals Mounting Hardware M = Metric end caps E = Imperial end caps G = Line/load standard W = Without terminals Trip Unit AA = Adj. adj. FA = Fixed adj. KS = Molded case switch 33 = 310+ electronic LS 3 = 310+ electronic LSI 35 = 310+ electronic LSG 36 = 310+ electronic LSIG 38 = 310+ electronic ALSI 39 = 310+ electronic ALSIG NN = Frame only (no trip) Metric Imperial Metric Trip Unit AA = Adj. adj., thermal-magnetic FA = Fixed adj., thermal-magnetic KS = Molded case switch 33 = 310+ electronic LS 3 = 310+ electronic LSI 35 = 310+ electronic LSG 36 = 310+ electronic LSIG 38 = 310+ electronic ALSI 39 = 310+ electronic ALSIG V4-T-46 Volume 4 Circuit Protection CA E February 01

47 Series G. Product Selection Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) LG-Frame LG-Frame LG-Frame LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 35 kaic at 415 and 480 Vac 1 Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 50 kaic at 415 and 480 Vac 1 LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 70 kaic at 415, 65 kaic at 480 Vac 1 Fixed Thermal, Adjustable Magnetic 1 Replace suffix G with W for no line and load terminals. For two-pole applications, use two outer poles. 3 Neutral protection is indicated by the fourth character: 4 = 0%, 7 = 100%, 8 = adjustable 0 60% and 9 = 0 100%. Neutral is on LH side. 4 30/630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA rating for the LG. 5 Adjustable thermal units are typically used in IEC markets and are not UL or CSA listed. Adjustable Thermal, Adjustable Magnetic LGE350FAG LGE350AAG LGE450FAG LGE450AAG 300 LGE3300FAG LGE4300FAG 30 LGE330AAG LGE430AAG 350 LGE3350FAG LGE4350FAG 400 LGE3400FAG LGE3400AAG LGE4400FAG LGE4400AAG 500 LGE3500FAG LGE3500AAG LGE4500FAG LGE4500AAG 600 LGE3600FAG LGE4600FAG LGE3630AAG LGE4630AAG Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic LGS350FAG LGS350AAG LGS450FAG LGS450AAG 300 LGS3300FAG LGS4300FAG 30 LGS330AAG LGS430AAG 350 LGS3350FAG LGS4350FAG 400 LGS3400FAG LGS3400AAG LGS4400FAG LGS4400AAG 500 LGS3500FAG LGS3500AAG LGS4500FAG LGS4500AAG 600 LGS3600FAG LGS4600FAG LGS3630AAG LGS4630AAG Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic LGH350FAG LGH350AAG LGH450FAG LGH450AAG 300 LGH3300FAG LGH4300FAG 30 LGH330AAG LGH430AAG 350 LGH3350FAG LGH4350FAG 400 LGH3400FAG LGH3400AAG LGH4400FAG LGH4400AAG 500 LGH3500FAG LGH3500AAG LGH4500FAG LGH4500AAG 600 LGH3600FAG LGH4600FAG LGH3630AAG LGH4630AAG Volume 4 Circuit Protection CA E February 01 V4-T-47

48 . Series G Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) LG-Frame LG-Frame LG-Frame LG-Frame 630 Amperes (600 Amperes UL, CSA), Current Limiting Per UL 489 IC : 100 kaic at 415 and 480 Vac 1 Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 Fixed Thermal, Adjustable Magnetic LG-Frame 630 Amperes (600 Amperes UL, CSA), Current Limiting Per UL 489 IC : 150 kaic at 415 and 480 Vac 1 LG-Frame 630 Amperes (600 Amperes UL, CSA), Current Limiting Per UL 489 IC : 00 kaic at 415 and 480 Vac 1 1 Replace suffix G with W for no line and load terminals. For two-pole applications, use two outer poles. 3 Neutral protection is indicated by the fourth character: 4 = 0%, 7 = 100%, 8 = adjustable 0 60% and 9 = 0 100%. Neutral is on LH side. 4 30/630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA rating for the LG. 5 Adjustable thermal units are typically used in IEC markets and are not UL or CSA listed. Adjustable Thermal, Adjustable Magnetic LGC350FAG LGC350AAG LGC450FAG LGC450AAG 300 LGC3300FAG LGC4300FAG 30 LGC330AAG LGC430AAG 350 LGC3350FAG LGC4350FAG 400 LGC3400FAG LGC3400AAG LGC4400FAG LGC4400AAG 500 LGC3500FAG LGC3500AAG LGC4500FAG LGC4500AAG 600 LGC3600FAG LGC4600FAG LGC3630AAG LGC4630AAG Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic LGU350FAG LGU350AAG LGU450FAG LGU450AAG 300 LGU3300FAG LGU4300FAG 30 LGU330AAG LGU430AAG 350 LGU3350FAG LGU4350FAG 400 LGU3400FAG LGU3400AAG LGU4400FAG LGU4400AAG 500 LGU3500FAG LGU3500AAG LGU4500FAG LGU4500AAG 600 LGU3600FAG LGU4600FAG LGU3630AAG LGU4630AAG Ampere Three-Pole Four-Pole (0%) 3 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 45 Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic LGX350FAG LGX350AAG LGX450FAG LGX450AAG 300 LGX3300FAG LGX4300FAG 30 LGX330AAG LGX430AAG 350 LGX3350FAG LGX4350FAG 400 LGX3400FAG LGX3400AAG LGX4400FAG LGX4400AAG 500 LGX3500FAG LGX3500AAG LGX4500FAG LGX4500AAG 600 LGX3600FAG LGX4600FAG LGX3630AAG LGX4630AAG V4-T-48 Volume 4 Circuit Protection CA E February 01

49 Series G. Molded Case Switches 1 Ampere Frame IC at 415/480 Volts Three-Pole Four-Pole 0% Thermal-Magnetic Trip Unit Three-Pole Four-Pole (0%) 5 1 Molded case switches will trip above 6300 amperes. For two-pole applications, use two outer poles amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA rating for the LG. 4 Adjustable thermal, adjustable magnetic trip units are typically used in IEC markets and are not UL or CSA listed. 5 Neutral protection is indicated by the third character: 4 = 0%, 7 = 100%, 8 = adjustable 0 60% and 9 = 0 100% % rated frame. of Poles LGK3400KSG 4 LGK4400KSG LGK3630KSG 4 LGK4630KSG Maximum Amperes 3 35/ LGE3630NN LGE4630NN LGE3630NNWC 50/ LGS3630NN LGS4630NN LGS3630NNWC 70/ LGH3630NN LGH4630NN LGH3630NNWC 100/100 Current Limiting Per UL LGC3630NN LGC4630NN 150/150 Current Limiting Per UL LGU3630NN LGU4630NN 00/00 Current Limiting 630 LGX3630NN LGX4630NN Ampere Fixed Thermal, Adjustable Magnetic Adjustable Thermal, Adjustable Magnetic 4 Fixed Thermal, Adjustable Magnetic 50 LT350FA LT350AA LT450FA LT450AA 300 LT3300FA LT4300FA 30 LT330AA LT430AA 350 LT3350FA LT4350FA 400 LT3400FA LT3400AA LT4400FA LT4400AA 500 LT3500FA LT3500AA LT4500FA LT4500AA 600 LT3600FA LT4600FA 630 LT3630AA LT4630AA Adjustable Thermal, Adjustable Magnetic 4 Volume 4 Circuit Protection CA E February 01 V4-T-49

50 . Series G Electronic Trip Units Digitrip 310+ Ampere Plug-In Test Kit 4 Voltage 1 Required for four-wire systems if neutral protection is desired. 630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA listed rating for the LG. 3 Neutral protection: 4= 0%, 6 = 60%, 7 = 100%. Electronic trip unit neutral protection is not adjustable. 4 IL is 571B13. LS LSI LSG LSIG Long time pickup selectable via dial setting. 630 ampere settings 630, 600, 500, 400, 350, 315, 300, 50 (315, 630 are IEC ratings only). 600 ampere settings 600, 500, 450, 400, 350, 315, 300, 50 (315 is IEC rating only). 400 ampere settings 400, 350, 315, 300, 50, 5, 00, 160 (315 is IEC rating only). 50 ampere settings 50, 5, 00, 175, 160, 150, 15, 100 (160 is IEC rating only). Adjustable long time delay 4 seconds at 6 x I r. Adjustable short time delay Inst., 10, 300 ms. Neutral CT for LSG and LSIG 1 Three-Pole 50 LT35033 LT3503 LT35035 LT35036 LGFCT LT LT34003 LT LT LGFCT LT LT36003 LT LT LGFCT LT LT36303 LT LT LGFCT600 Four-Pole 3 50 LT45033 LT4503 LT45035 LT LT LT44003 LT LT LT LT46003 LT LT LT LT46303 LT LT Vac MTST10V 30 Vac MTST30V V4-T-50 Volume 4 Circuit Protection CA E February 01

51 Series G. IC at 415/480V Complete LG Breakers with Electronic Trip Unit (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) 1 IC : 35 kaic at 415 and 480 Vac Ampere IC : 50 kaic at 415 and 480 Vac IC : 70 kaic at 415 Vac, 65 kaic at 480 Vac LS LSI LSG LSIG 1 Replace suffix G with W for no line and load terminals. Required for four-wire systems if neutral protection is desired. 3 For two-pole applications, use two outer poles amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA listed rating for the LG. 5 Neutral protection: 4= 0%, 6 = 60%, 7 = 100%. Electronic trip unit neutral protection is not adjustable. Neutral CT for LSG and LSIG Three-Pole 3 50 LGE35033G LGE3503G LGE35035G LGE35036G LGFCT LGE340033G LGE34003G LGE340035G LGE340036G LGFCT LGE360033G LGE36003G LGE360035G LGE360036G LGFCT LGE363033G LGE36303G LGE363035G LGE363036G LGFCT600 Four-Pole 5 50 LGE45033G LGE4503G LGE45035G LGE45036G 400 LGE440033G LGE44003G LGE440035G LGE440036G 600 LGE460033G LGE46003G LGE460035G LGE460036G LGE463033G LGE46303G LGE463035G LGE463036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG Three-Pole 3 50 LGS35033G LGS3503G LGS35035G LGS35036G LGFCT LGS340033G LGS34003G LGS340035G LGS340036G LGFCT LGS360033G LGS36003G LGS360035G LGS360036G LGFCT LGS363033G LGS36303G LGS363035G LGS363036G LGFCT600 Four-Pole 5 50 LGS45033G LGS4503G LGS45035G LGS45036G 400 LGS440033G LGS44003G LGS440035G LGS440036G 600 LGS460033G LGS46003G LGS460035G LGS460036G LGS463033G LGS46303G LGS463035G LGS463036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG Three-Pole 3 50 LGH35033G LGH3503G LGH35035G LGH35036G LGFCT LGH340033G LGH34003G LGH340035G LGH340036G LGFCT LGH360033G LGH36003G LGH360035G LGH360036G LGFCT LGH363033G LGH36303G LGH363035G LGH363036G LGFCT600 Four-Pole 5 50 LGH45033G LGH4503G LGH45035G LGH45036G 400 LGH440033G LGH44003G LGH440035G LGH440036G 600 LGH460033G LGH46003G LGH460035G LGH460036G LGH463033G LGH46303G LGH463035G LGH463036G Volume 4 Circuit Protection CA E February 01 V4-T-51

52 . Series G IC at 415/480V Complete LG Breakers with Electronic Trip Unit (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) 1 IC : 100 kaic at 415 Vac and 480 Vac, Current Limiting Per UL 489 Ampere IC : 150 kaic at 415 Vac and 480 Vac, Current Limiting Per UL 489 IC : 00 kaic at 415 Vac and 480 Vac, Current Limiting Per UL 489 Neutral CT LS LSI LSG LSIG for LSG and LSIG LS LSI LSG LSIG 1 Replace suffix G with W for no line and load terminals. Required for four-wire systems if neutral protection is desired. 3 For two-pole applications, use two outer poles amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA listed rating for the LG. 5 Neutral protection: 4= 0%, 6 = 60%, 7 = 100%. Electronic trip unit neutral protection is not adjustable. Neutral CT for LSG and LSIG Three-Pole 3 50 LGC35033G LGC3503G LGC35035G LGC35036G LGFCT LGC340033G LGC34003G LGC340035G LGC340036G LGFCT LGC360033G LGC36003G LGC360035G LGC360036G LGFCT LGC363033G LGC36303G LGC363035G LGC363036G LGFCT600 Four-Pole 5 50 LGC45033G LGC4503G LGC45035G LGC45036G 400 LGC440033G LGC44003G LGC440035G LGC440036G 600 LGC460033G LGC46003G LGC460035G LGC460036G LGC463033G LGC46303G LGC463035G LGC463036G Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG Three-Pole 3 50 LGU35033G LGU3503G LGU35035G LGU35036G LGFCT LGU340033G LGU34003G LGU340035G LGU340036G LGFCT LGU360033G LGU36003G LGU360035G LGU360036G LGFCT LGU363033G LGU36303G LGU363035G LGU363036G LGFCT600 Four-Pole 5 50 LGU45033G LGU4503G LGU45035G LGU45036G 400 LGU440033G LGU44003G LGU440035G LGU440036G 600 LGU460033G LGU46003G LGU460035G LGU460036G LGU463033G LGU46303G LGU463035G LGU463036G Ampere Three-Pole 3 50 LGX35033G LGX3503G LGX35035G LGX35036G LGFCT LGX340033G LGX34003G LGX340035G LGX340036G LGFCT LGX360033G LGX36003G LGX360035G LGX360036G LGFCT LGX363033G LGX36303G LGX363035G LGX363036G LGFCT600 Four-Pole 5 50 LGX45033G LGX4503G LGX45035G LGX45036G 400 LGX440033G LGX44003G LGX440035G LGX440036G 600 LGX460033G LGX46003G LGX460035G LGX460036G LGX463033G LGX46303G LGX463035G LGX463036G V4-T-5 Volume 4 Circuit Protection CA E February 01

53 Series G. LG 100% Rated Circuit Breaker Thermal-Magnetic Trip Unit Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) LG-Frame LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 35 kaic at 415 and 480 Vac 1 Three-Pole Fixed Thermal, Adjustable Magnetic Ampere 50 LGE350FAGC 300 LGE3300FAGC LGE3350FAGC 400 LGE3400FAGC 500 LGE3500FAGC 600 LGE3600FAGC LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 50 kaic at 415 and 480 Vac 1 Three-Pole Fixed Thermal, Adjustable Magnetic Ampere 50 LGS350FAGC 300 LGS3300FAGC LGS3350FAGC 400 LGS3400FAGC 500 LGS3500FAGC 600 LGS3600FAGC LG-Frame 630 Amperes (600 Amperes UL, CSA) IC : 70 kaic at 415, 65 kaic at 480 Vac 1 Three-Pole Fixed Thermal, Adjustable Magnetic Ampere 50 LGH350FAGC 300 LGH3300FAGC LGH3350FAGC 400 LGH3400FAGC 500 LGH3500FAGC 600 LGH3600FAGC Replace suffix G with W for no line and load terminals. For two-pole applications, use two outer poles. Volume 4 Circuit Protection CA E February 01 V4-T-53

54 . Series G LG 100% Rated Electronic Breaker Per UL 489 IEC/UL/CSA 35 kaic at 415 and 480 Vac Ampere IEC/UL/CSA 50 kaic at 415 and 480 Vac IEC/UL/CSA 70 kaic at 415 and 480 Vac LS LSI LSG LSIG 1 Required for four-wire systems if neutral protection is required. 630 amperes is not a UL or CSA listed rating. 600 amperes is the maximum UL and CSA listed rating for the LG. Neutral CT for LSG and LSIG 1 50 LGE35033GC LGE3503GC LGE35035GC LGE35036GC LGFCT LGE340033GC LGE34003GC LGE340035GC LGE340036GC LGFCT LGE360033GC LGE36003GC LGE360035GC LGE360036GC LGFCT LGE363033GC LGE36303GC LGE363035GC LGE363036GC LGFCT600 Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 50 LGS35033GC LGS3503GC LGS35035GC LGS35036GC LGFCT LGS340033GC LGS34003GC LGS340035GC LGS340036GC LGFCT LGS360033GC LGS36003GC LGS360035GC LGS360036GC LGFCT LGS363033GC LGS36303GC LGS363035GC LGS363036GC LGFCT600 Ampere LS LSI LSG LSIG Neutral CT for LSG and LSIG 1 50 LGH35033GC LGH3503GC LGH35035GC LGH35036GC LGFCT LGH340033GC LGH34003GC LGH340035GC LGH340036GC LGFCT LGH360033GC LGH36003GC LGH360035GC LGH360036GC LGFCT LGH363033GC LGH36303GC LGH363035GC LGH363036GC LGFCT600 V4-T-54 Volume 4 Circuit Protection CA E February 01

55 Series G. LG Electronic Breaker with Arcflash Reduction Maintenance System Series G LG circuit breakers simple and reliable method to are available with the Arcflash reduce fault clearing time. Reduction Maintenance The Arcflash Reduction System integrated into the Maintenance System unit electronic trip units helping to utilizes a separate analog trip improve safety by providing a circuit that provides faster LG with Arcflash Reduction Maintenance System interruption times than the standard (digital) instantaneous protection. Work locations downstream of a circuit breaker with an Arcflash Reduction LG Electronic Breaker with Arcflash Reduction Maintenance System Neutral CT for ALSI ALSIG LSG and LSIG 1 Ampere LG Electronic Trip Units with Arcflash Reduction Maintenance System Neutral CT for ALSI ALSIG LSG and LSIG 1 Note 1 Required for four-wire systems if neutral protection is required. IEC/UL/CSA 35 kaic at 415 and 480 Vac 50 LGE35038G LGE365039G LGFCT LGE340038G LGE340039G LGFCT LGE360038G LGE360039G LGFCT LGE363038G LGE363039G LGFCT600 IEC/UL/CSA 50 kaic at 415 and 480 Vac 50 LGS35038G LGS365039G LGFCT LGS340038G LGS340039G LGFCT LGS360038G LGS360039G LGFCT LGS363038G LGS363039G LGFCT600 IEC/UL/CSA 70 kaic at 415 and 480 Vac 50 LGH35038G LGH365039G LGFCT LGH340038G LGH340039G LGFCT LGH360038G LGH360039G LGFCT LGH363038G LGH363039G LGFCT600 IEC/UL/CSA 100 kaic at 415 and 480 Vac, Current Limiting Per UL LGC35038G LGC365039G LGFCT LGC340038G LGC340039G LGFCT LGC360038G LGC360039G LGFCT LGC363038G LGC363039G LGFCT600 IEC/UL/CSA 150 kaic at 415 and 480 Vac, Current Limiting Per UL LGU35038G LGU365039G LGFCT LGU340038G LGU340039G LGFCT LGU360038G LGU360039G LGFCT LGU363038G LGU363039G LGFCT600 IEC/UL/CSA 00 kaic at 415 and 480 Vac, Current Limiting Per UL LGX35038G LGX365039G LGFCT LGX340038G LGX340039G LGFCT LGX360038G LGX360039G LGFCT LGX363038G LGX363039G LGFCT600 Ampere 50 LT35038 LT35039 LGFCT LT LT LGFCT LT LT LGFCT LT LT LGFCT600 Maintenance System unit can have a significantly lower incident energy level, reducing arc flash potential to the system. Volume 4 Circuit Protection CA E February 01 V4-T-55

56 . Series G Accessories Selection Guide and Ordering Information Line and Load Terminals Maximum Breaker Amperes Terminal Covers Terminal Body Material End Cap Kits (MIO Metric Nuts) Control Wire Terminal Kit Terminal Description Body Type Wire Type AWG Wire Range/ of Conductors Metric Wire Range (mm ) Terminal Spreaders of Poles Terminal Extensions of Poles Handle Extension Interphase Barrier of Terminals Included 400 Aluminum Cu/Al (1) (1) 3 3TA631LK Aluminum Cu/Al (1) (1) 4 4TA631LK Copper Cu (1) (1) 3 3T631LK Copper Cu (1) (1) 4 4T631LK Aluminum Cu/Al 500 () () 1 TA63L 630 Aluminum Cu/Al 500 () () 3 3TA63LK Aluminum Cu/Al 500 () () 4 4TA63LK Copper Cu 500 () () 3 3T63LK Copper Cu 500 () () 4 4T63LK Aluminum Cu/Al (1) (1) 1 TA350LK 400 Copper Cu (1) (1) 1 T350LK Description Three-pole terminal cover 3 Four-pole terminal cover 3 of Poles 3 L3RTWK 4 L4RTWK LTS3K LTS4K Three-pole kit Aluminum 3TA63LKW Four-pole kit Aluminum 4TA63LKW Three-pole kit Copper 3T63LKW Four-pole kit Copper 4T63LKW 3 LGTEW3 4 LGTEW4 3 LGTES3 4 LGTES4 Description Handle extension Package of Interphase barrier HEXLG IPB3 1 Includes LTS3K (three-pole) or LTS4K (four-pole) terminal covers. Standard terminal included with complete breaker. 3 Included in TA63IL, T63IL, TA63L kits listed above. V4-T-56 Volume 4 Circuit Protection CA E February 01

57 Volume 4 Circuit Protection CA E February 01 V4-T-57. Series G Terminals and Terminal Cover for the LG Breaker Includes LTS3K (Three-Pole) or LTS4K (Four-Pole) Terminal Covers Note: Extended terminal covers add.13 inches (54.0 mm) to breaker length.

58 . Series G Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. LG-Frame Accessories Description Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Note 1 Contact Eaton. Reference Page Three-Pole Four-Pole Left Center Right Left Center Right Neu. Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-104 Auxiliary switch (1A, 1B) V4-T-104 Auxiliary switch (A, B) V4-T-104 Auxiliary switch and alarm switch combination V4-T-104 Shunt trip standard V4-T-104 Undervoltage release mechanism V4-T-105 External Accessories End cap kit V4-T-56 Handle extension V4-T-56 Terminal cover V4-T-56 Padlockable handle block V4-T-10 Padlockable handle lock hasp V4-T-10 Key interlock kit V4-T-10 Sliding bar interlock requires two breakers V4-T-10 Electrical operator V4-T-10 Plug-in adapters V4-T-10 Rear connecting studs V4-T-10 Handle mechanisms V4-T-110 Earth leakage/ground fault protector V4-T-89 Drawout cassette V4-T-109 Digitrip 310+ test kit V4-T-50 Ammeter/cause of trip display V4-T-101 Cause of trip LED module V4-T-101 Modifications (Refer to Eaton) Moisture fungus treatment V4-T-100 Freeze-tested circuit breakers Marine/naval application, UL 489 Supplement SA and SB 1 V4-T-58 Volume 4 Circuit Protection CA E February 01

59 Series G. Technical Data and Specifications Interrupting Capacity s UL 489/IEC Interrupting Capacity s Interrupting Capacity (ka rms Symmetrical Amperes) (ka) Volts AC (50/60 Hz) Volts DC 1 Circuit Breaker Type of Poles Icu Ics Icu Ics Icu Ics Icu Ics LGE630 3, LGS630 3, LGH630 3, LGC , LGU , LGX , Dimensions and Weights Approximate Dimensions in Inches (mm) LG-Frame of Poles Width Height Depth, (139.) (57.3) 4.09 (103.9) 4 7. (183.4) (57.3) 4.09 (103.9) LG-Frame Note: TA63IL, T63IL, T63L, TA63L terminals add 1.19 inches (30. mm) to line or load side of LG. LTS3K or LTS4K terminal covers add.13 inches (54.1 mm) to line or load side of LG. R 0.5 (6.4).00 (50.8).69 (68.3) C L 5.38 (136.7).43 (61.7) Breaker 3.16 (80.3) 1.9 (48.8) 5.48 (139.) 5.58 (141.7) Four-Pole 4.06 (103.1) (57.3) Approximate Shipping Weight in Lbs (kg) LG-Frame Breaker Type Two- and Three-Pole Four-Pole LGE, LGS, LGH, LGC, LGU, LGX 16 (7.3) 0 (9.1) 1 DC rating apply to substantially non-inductive circuits. Two-pole circuit breaker, or two poles of three-pole circuits. 3 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 4 Three-poles in series. 750 Vdc ratings available (four-pole in series, not UL listed). Contact Eaton. 5 IEC rating is Vac. 6 Current limiting per UL 489. Volume 4 Circuit Protection CA E February 01 V4-T-59

60 . Series G LG-Frame With Earth Leakage Module 5.16 (131.1) 3.44 (87.4) 1.7 (43.7) 4.31 (109.5) 4.06 (103.1) 3.98 (101.1) 3.44 (87.4) 1.7 (43.7) 0.86 (1.8) 4.73 (10.1) 5.58 (141.7) 5.58 (141.7) 4.73 (10.1) (347.7) 8.44 (14.4) (57.3) (390.7) (390.7) 8.44 (14.4) (347.5) 3-Pole 5.48 (139.) 4-Pole 7. (183.4) 4-Pole.75 (69.9) 3-Pole.74 (69.6) 3.97 (100.8) 4.30 (109.) 4.55 (115.6) 5.43 (137.9) 4-Pole 7. (183.4) 3-Pole 5.48 (139.) 4-Pole.75 (69.9) 3-Pole.74 (69.6) V4-T-60 Volume 4 Circuit Protection CA E February 01

61 Series G. NG-Frame (100 Ampere) NG-Frame ( Amperes) Product Description All Eaton NG-Frame circuit breakers are suitable for reverse feed use All NG-Frame circuit breakers are HACR rated Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) Selection V4-T-6 Product Selection Guide and Ordering Information V4-T-63 Accessories V4-T-66 Technical Data and Specifications V4-T-67 Dimensions and Weights V4-T-69 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Volume 4 Circuit Protection CA E February 01 V4-T-61

62 . Series G Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame System Circuit Breaker Frame NG = US GN = International 1 Neutral inn left pole on GN; right pole on NG. Breakers do not ship with lugs. Interrupting (kaic) S = 50 ka H = 65 ka C = 100 ka U = 150 ka of Poles 3 = Three 4 = Four; neutral 0% protected 1 7 = Four; neutral 100% protected 1 9 = Four; neutral 0/60/100% adjustable protection 1 NG H E ZG Trip Amperes 080 = 800A NEMA/IEC 10 = 100A NEMA 15 = 150A IEC 160 = 1600A IEC Trip Unit 33 = 310+ LS 3 = 310+ LSI 35 = 310+ LSG 36 = 310+ LSIG 38 = 310+ ALSI 39 = 310+ ALSIG KS = Molded case switch Terminations M = Metric tapped line/load conductors E = Imperial tapped line/load conductors Metric mounting hardware will be included with three- and four-pole breakers. If Imperial mounting hardware is needed, order catalog number BMH5. Trip units are factory installable only. Suffix C = 100% rated V = 50ºC calibrated ZG = Zone interlock V4-T-6 Volume 4 Circuit Protection CA E February 01

63 Series G. Product Selection Guide and Ordering Information Type NGS Standard Interrupting Capacity U e Max. 690 Vac, 50 ka l cu at 480 Vac or 415 Vac Circuit Breaker Frame Including Digitrip RMS 310+ Electronic Trip Unit with Imperial Tapped Conductors Maximum Continuous Ampere at 40 C 1 Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay of Poles Type NGS Standard Interrupting Capacity U e Max. 690 Vac, 50 ka I cu at 415 Vac Circuit Breaker Frame Including Digitrip RMS 310+ Electronic Trip Unit with Metric Tapped Conductors Molded Case Switches 78 L Adjustable Long Delay Pickup S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) LS LSI LSG LSIG ALSI ALSIG 8 x I n 8 x I n I 300 ms 8 x I n A I 500 ms 1 For AC use only. NG MCCBs are suitable for 40 C or 50 C applications. Order suffix V3 to eliminate standard 40 C labeling. 3 Non-UL listed NG 150 with 150 ampere trip unit is also available. 4 Neutral 0% protected. NG, neutral in right pocket; GN, neutral in left pocket. 5 Neutral 100% protected (denoted by 7 in digit four). 6 Neutral 0%/60%/100% adjustable protection (denoted by 9 in digit four). 7 For AC use only. Molded case switch will trip above 14,000 amperes. 8 For two-pole applications, use outer poles of three-pole molded case switch. 8 x I n I 300 ms A I 500 ms 8 x I n I 300 ms 8 x I n I 300 ms A I 500 ms NGS308033E NGS30803E NGS308035E NGS308036E NGS308038E NGS308039E 4 4 NGS408033E NGS40803E NGS408035E NGS408036E NGS408038E NGS408039E 4 5 NGS708033E NGS70803E NGS708038E 4 6 NGS908033E NGS90803E NGS908038E NGS31033E NGS3103E NGS31035E NGS31036E NGS31038E NGS31039E 4 4 NGS41033E NGS4103E NGS41035E NGS41036E NGS41039E Maximum Continuous Ampere at 40 C 1 Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay 4 5 NGS71033E NGS7103E NGS71038E 4 6 NGS91033E NGS9103E NGS91038E of Poles L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) LS LSI LSG LSIG ALSI ALSIG 8 x I n 8 x I n I 300 ms 8 x I n A I 500 ms 8 x I n I 300 ms A I 500 ms 8 x I n I 300 ms 8 x I n I 300 ms A I 500 ms NGS316033M NGS31603M NGS316035M NGS316036M NGS316038M NGS316039M 4 4 NGS416033M NGS41603M NGS416035M NGS416036M NGS416038M NGS416039M 4 5 NGS716033M NGS71603M NGS716038M 4 6 NGS916033M NGS91603M NGS916038M Ampere U e Maximum 690 Vac Three-Pole Four-Pole 800 MCS with Imperial line and load terminals NGS3080KSE MCS with Imperial line and load terminals NGS4080KSE 100 MCS with Imperial line and load terminals NGS310KSE MCS with Imperial line and load terminals NGS410KSE 150 MCS with Imperial line and load terminals NGS315KSE MCS with Imperial line and load terminals NGS4315KSE Volume 4 Circuit Protection CA E February 01 V4-T-63

64 . Series G Type NGH High Interrupting Capacity U e Max. 690 Vac, 65 ka l cu at 480 Vac or 415 Vac Maximum Continuous Ampere at 40 C 1 Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay of Poles Circuit Breaker Frame Including Digitrip Electronic Trip Unit L Adjustable Long Delay Pickup S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) LS LSI LSG LSIG ALSI ALSIG 8 x I n 8 x I n I 300 ms 8 x I n A I 500 ms Type NGC Very High Capacity U e Max. 690 Vac, 100 ka l cu at 480 Vac or 415 Vac Circuit Breaker Frame Including Digitrip RMS 310+ Electronic Trip Unit with Imperial Tapped Conductors 1 For AC use only. NG MCCBs are suitable for 40 C or 50 C applications. Order suffix V3 to eliminate standard 40 C labeling. 3 Neutral 0% protected. NG, neutral in right pocket; GN, neutral in left pocket. 4 Neutral 100% protected (denoted by 7 in digit four). 5 Neutral 0%/60%/100% adjustable protection (denoted by 9 in digit four). 8 x I n I 300 ms A I 500 ms 8 x I n I 300 ms 8 x I n I 300 ms A I 500 ms NGH308033E NGH30803E NGH308035E NGH308036E NGH308038E NGH308039E 4 3 NGH408033E NGH40803E NGH408035E NGH408036E NGH408038E NGH408039E 4 4 NGH708033E NGH70803E NGH708038E 4 5 NGH908033E NGH90803E NGH908038E NGH31033E NGH3103E NGH31035E NGH31036E NGH31038E NGH31039E 4 3 NGH41033E NGH4103E NGH41035E NGH41036E NGH41039E Maximum Continuous Ampere at 40 C 1 Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay 4 4 NGH71033E NGH7103E NGH71038E 4 5 NGH91033E NGH9103E NGH91038E of Poles L Adjustable Long Delay Pickup S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) LS LSI LSG LSIG ALSI ALSIG 8 x I n 8 x I n I 300 ms 8 x I n A I 500 ms 8 x I n I 300 ms A I 500 ms 8 x I n I 300 ms 8 x I n I 300 ms A I 500 ms NGC308033E NGC30803E NGC308035E NGC308036E NGC308038E NGC308039E 4 3 NGC408033E NGC40803E NGC408035E NGC408036E NGC408038E NGC408039E 4 4 NGC708033E NGC70803E NGC708038E 4 5 NGC908033E NGC90803E NGC908038E NGC31033E NGC3103E NGC31035E NGC31036E NGC31038E NGC31039E 4 3 NGC41033E NGC4103E NGC41035E NGC41036E NGC41039E 4 4 NGC71033E NGC7103E NGC71038E 4 5 NGC91033E NGC9103E NGC91038E V4-T-64 Volume 4 Circuit Protection CA E February 01

65 Series G. Accessories Selection Guide and Ordering Information Line and Load Terminals N-Frame circuit breakers do not include terminals as standard. When copper or Cu/Al terminals are required, order by catalog number. Line and Load Terminals Maximum Breaker Amperes Base Mounting Hardware Base mounting hardware is included with a circuit breaker or molded case switch. Base Mounting Hardware Terminal Shield Terminal Shield Terminal Body Material Conductor Extension Kit Conductor Extension Kit 3 Wire Type Keeper Nut Not required on NG-Frame. Terminals are threaded. AWG Wire ( of Conductors) AWG Wire 1 Handle Extension Included with breaker. Additional handle extensions are available. Handle Extension Description Interphase Barriers The interphase barriers provide additional electrical clearance between circuit breaker poles for special termination applications. Barriers are high dielectric insulating plates that are installed in the molded slots between the terminals. (Field installation only.) Interphase Barriers Metric Wire Range mm 1 Single terminals individually packed. Metric hardware included with breaker. 3 Included as standard on 100% rated 800/100A breakers. Metric 1 Standard Cu/Al Pressure Terminals 700 Aluminum Cu/Al () TA700NB TA700NB1M 1000 Aluminum Cu/Al 3/0 400 (3) TA1000NB TA1000NB1M 100 Aluminum Cu/Al 4/0 500 (4) TA100NB TA100NB1M 100 Aluminum Cu/Al (3) TA101NB TA101NB1M Optional Copper and Cu/Al Pressure Type Terminals 700 Copper Cu /0 500 () T700NB T700NB1M 1000 Copper Cu 3/0 500 (3) T1000NB T1000NB1M 100 Copper Cu 3/0 400 (4) T100NB T100NB3M of Poles Three- and four-pole Three- and four-pole Description Three-pole terminal shield Description Three-pole both ends Metric Three-pole both ends English Description Imperial hardware: x 1.5 pan-head steel screws and lock washers Metric hardware: M8 pan-head steel screws and lock washers BMH5 BMH5M NTS3K 5104A4G A4G0 Single handle extension Description Interphase barriers HEX5 IPB5 Volume 4 Circuit Protection CA E February 01 V4-T-65

66 . Series G Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. NG-Frame Accessories Three-Pole Four-Pole Reference Description Page Left Center Right Left Center Right Neu. Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-104 Auxiliary switch (1A, 1B) V4-T-104 Auxiliary switch (A, B) V4-T-104 Auxiliary switch and alarm switch combination V4-T-104 Shunt trip standard V4-T-104 Undervoltage release mechanism V4-T-105 External Accessories Base mounting hardware V4-T-65 Interphase barriers V4-T-65 Non-padlockable handle block V4-T-10 Padlockable handle lock hasp V4-T-10 Key interlock kit V4-T-10 Sliding bar interlock requires two breakers V4-T-10 Electrical operator V4-T-10 Plug-in adapters V4-T-108 Rear connecting studs V4-T-10 Handle mechanisms V4-T-110 Drawout cassette V4-T-109 Handle extension V4-T-65 Ammeter/cause of trip display V4-T-101 Cause of trip LED module V4-T-101 Digitrip 310 test kit V4-T-10 Modifications (Refer to Eaton) Moisture fungus treatment V4-T-100 Freeze-tested circuit breakers Marine/Naval application, UL 489 Supplement SA and SB 1 Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Note 1 Contact Eaton. V4-T-66 Volume 4 Circuit Protection CA E February 01

67 Series G. Technical Data and Specifications Interrupting Capacity s UL 489/IEC Interrupting Capacity s 1 Circuit Breaker Type NG-Frame Digitrip Specifications Specification Trip Unit Type Digitrip RMS 310+ rms sensing Yes Breaker Type Frame N Ampere range A Interrupting rating at 480 volts 50, 65, 100 (ka) Protection Ordering options LS, LSG LSI, LSIG Fixed rated plug (I n ) No No Overtemperature trip Yes Yes Long Delay Protection (L) Adjustable trip setting (I n ) Yes Yes Long delay pickup (I n ) (I n ) Long delay time I t 1 seconds 1 seconds Long delay time I 4 t No No Long delay thermal memory Yes Yes High load alarm No No Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) Short delay time I t 100 ms No Short delay time flat No Inst 300 ms Short delay time zone selective interlocking Yes Yes Instantaneous Protection (I) Instantaneous pickup No % x (I n ) Discriminator No No Instantaneous override Yes Yes Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug = Long Delay Pickup Setting I r of Poles Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) (UL) I cu I cs I cu I cs I cu I cs NGS 1, 3, NGH, 3, NGC, 3, Note amperes is not a UL or CSA listed rating. 100 amperes is the maximum UL and CSA rating for NG. 690 Volume 4 Circuit Protection CA E February 01 V4-T-67

68 . Series G Specifications, continued Trip Unit Type Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 With cause of trip LED module (Trip-LED) With separate ground fault alarm unit (GFAU). 3 With cause of trip display (DIGIVIEW or DIGIVIEWR06) Digitrip RMS 310+ LS, LSG LSI, LSIG Ground Fault Protection (G) Ground fault alarm No No Ground fault pickup 1 5 x Ig (160A) 1 5 x Ig (160A) Ground fault delay I t No No Ground fault delay flat Inst 500 ms Inst 500 ms Ground fault zone selective interlocking Yes Yes Ground fault thermal memory Yes Yes System Diagnostics Status LEDs Yes Yes Cause of trip LEDs Yes 1 Yes 1 Magnitude of trip information No No Remote signal contact ground alarm Yes Yes Local auxiliary and bell alarm contact Optional Optional System Monitoring Digital display Yes 3 Yes 3 Current Yes 3 Yes 3 Power and energy No No Power quality harmonics No No Power factor No No Communications Eaton PowerNet No No Testing Testing method Test set Test set V4-T-68 Volume 4 Circuit Protection CA E February 01

69 Series G. Dimensions and Weights Approximate Dimensions in Inches (mm) NG-Frame of Poles Width Height Depth (09.6) (406.4) 5.50 (139.7) (8.6) (406.4) 5.50 (139.7) NG-Frame Front Cover Cutout Front View 3-Pole Side View R.5 (6.4) 3.44 (87.4) BREAKER 1.50 (38.1) 1.91 (48.5) 3.68 (93.5) 9.5 (35.0) (406.4) 3.19 (81.0) 6.38 (16.1) 8.5 (09.6) 5.50 (139.7) Approximate Shipping Weight in Lbs (kg) NG-Frame Complete Breaker Breaker Type Three-Pole Four-Pole NGS, NGH, NGC 45 (0.4) 58 (6.3) Volume 4 Circuit Protection CA E February 01 V4-T-69

70 . Series G RG-Frame ( Amperes) RG-Frame ( Amperes) Product Description Eaton s RG-Frame circuit breakers are available as frame (which includes trip unit), rating plug and terminals All R-Frame circuit breakers are suitable for reverse feed use Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) Selection V4-T-71 Product Selection V4-T-7 Accessories V4-T-79 Technical Data and Specifications V4-T-80 Dimensions and Weights V4-T-81 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 V4-T-70 Volume 4 Circuit Protection CA E February 01

71 Series G. Selection RG Circuit Breaker/Frame RGH 3 16 T33 W A01 Type RGH 65K RGC 100K of Poles 3 = 3 poles 4 = 4 poles Amperes 16 = 1600A 0 = 000A 5 = 500A Trip Function Digitrip 310 T33 = LS T3 = LSI T35 = LSG T36 = LSIG Digitrip 610 T61 = LI T6 = LSI T63 = LS T64 = LIG T65 = LSG T66 = LSIG Digitrip 910 T91 = LI T9 = LSI T93 = LS T94 = LIG T95 = LSG T96 = LSIG Modification Suffix R = Ground fault remote RES trip E = 100% protection (new design 310) RES trip unit P = 100% prot. neut. 4P RES trip unit V3 = Electronic trip w/o ambient temperature marked on trip unit W = w/o terms K = Molded case switch Function Codes A1-A19 = Auxiliary switch B01-B0 = Bell alarm D01 = Drawout moving carrier E01-E13 = Electrical operator H01-H11 = Special ratings J01 = Moisture fungus proof L01-L05 = Locks N01 = Low energy shunt trip P01-P64 = plugs Q01-Q0 = Terminal block S1-S88 = Shunt trip T1-T37 = UVR (DC) U33-U58 = UVR (AC) W01 = Walking beam interlock X01-X08 = Load termination Y01-Y08 = Line termination Z01-Z08 = Line and load termination Volume 4 Circuit Protection CA E February 01 V4-T-71

72 . Series G Product Selection Type RGH with Digitrip 310 High Interrupting Capacity U e Maximum 690 Vac, 70 ka I cu at 415 Vac Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Plugs Maximum Continuous Ampere at 40 C 1 of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) 1 For SCR application, use 000 ampere frame. Order terminals separately. Mounting hardware not included. 3 Ground fault equipped trip units available with remote indicating panel. Add R to catalog number, e.g., RGH316T35RW. 4 Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Interchangeable Plugs (Order as Individual Component) LS LSI LSG 3 LSIG 3 Plug Fixed 8 x I n 8 x I n 8 x I n 8 x I n I 300 ms I 300 ms A A Ampere I 500 ms I 500 ms Included with Breaker Adjustable Plug 4 Adjustable Ampere Settings RGH316T33WP08 RGH316T3WP08 RGH316T35WP08 RGH316T36WP RES08T 800/1000/ RES10T 100/1600 A16RES16T RES1T RES15T RES14T RES15T RES16T RGH30T33WP16 RGH30T3WP16 RGH30T35WP16 RGH30T36WP RES10T 1000/100/ 100 0RES1T 1600/000 A0RES0T1 150 A0RES15T 1400 A0RES14T 1600 A0RES16T 000 A0RES0T RGH35T33WP39 RGH35T3WP39 RGH35T35WP39 RGH35T36WP RES1T 100/1600/ 150 5RES15T 000/500 A5RES5T A5RES16T 000 A5RES0T 500 A5RES5T V4-T-7 Volume 4 Circuit Protection CA E February 01

73 Series G. Type RGH with Digitrip 310 High Interrupting Capacity U e Maximum 690 Vac, 70 ka I cu at 415 Vac Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Plugs Maximum Continuous Ampere at 40 C 1 of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Plugs (Order as Individual Component) LS LSI LSG 3 LSIG 3 Plug Fixed 8 x I n 8 x I n 8 x I n 8 x I n I 300 ms I 300 ms A A Ampere I 500 ms I 500 ms 1 For SCR application, use 000 ampere frame. Order terminals separately. Mounting hardware not included. 3 Ground fault equipped trip units available with remote indicating panel. Add R to catalog number, e.g., RGH316T35RW. 4 Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. 5 Unprotected left pole neutral. Add P to catalog number for 100% protected left pole neutral, add E for 60% protected, e.g., RGH416T33PW, RGH416T33EW. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Included with Breaker Adjustable Plug 4 Adjustable Ampere Settings RGH416T33WP08 RGH416T3WP RES08T 800/1000/ RES10T 100/1600 A16RES16T RES1T RES15T RES14T RES15T RES16T RGH40T33WP16 RGH40T3WP RES10T 1000/100/ 100 0RES1T 1600/000 A0RES0T1 150 A0RES15T 1400 A0RES14T 1600 A0RES16T 000 A0RES0T RGH45T33WP39 RGH45T3WP RES1T 100/1600/ 150 5RES15T 000/500 A5RES5T A5RES16T 000 A5RES0T 500 A5RES5T Volume 4 Circuit Protection CA E February 01 V4-T-73

74 . Series G Type RGC with Digitrip 310 Very High Interrupting Capacity U e Maximum 690 Vac, 100 ka I cu at 415 Vac Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Plugs Maximum Continuous Ampere at 40 C 1 of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) 1 For SCR application, use 000 ampere frame. Order terminals separately. Mounting hardware not included. 3 Ground fault equipped trip units available with remote indicating panel. Add R to catalog number, e.g., RGH316T35RW. 4 Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Interchangeable Plugs (Order as Individual Component) LS LSI LSG 3 LSIG 3 Plug Fixed 8 x I n 8 x I n 8 x I n 8 x I n I 300 ms I 300 ms A A Ampere I 500 ms I 500 ms Included with Breaker Adjustable Plug 4 Adjustable Ampere Settings RGC316T33WP08 RGC316T3WP08 RGC316T35WP08 RGC316T36WP RES08T 800/1000/ RES10T 100/1600 A16RES16T RES1T RES15T RES14T RES15T RES16T RGC30T33WP16 RGC30T3WP16 RGC30T35WP16 RGC30T36WP RES10T 1000/100/ 100 0RES1T 1600/000 A0RES0T1 150 A0RES15T 1400 A0RES14T 1600 A0RES16T 000 A0RES0T RGC35T33WP40 RGC35T3WP40 RGC35T35WP40 RGC35T36WP RES1T 100/1600/ 150 5RES15T 000/500 A5RES5T A5RES16T 000 A5RES0T 500 A5RES5T V4-T-74 Volume 4 Circuit Protection CA E February 01

75 Series G. Type RGC with Digitrip 310 Very High Interrupting Capacity U e Maximum 690 Vac, 100 ka I cu at 415 Vac, continued Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Plugs Maximum Continuous Ampere at 40 C 1 of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Plugs (Order as Individual Component) LS LSI LSG 3 LSIG 3 Plug Fixed 8 x I n 8 x I n 8 x I n 8 x I n I 300 ms I 300 ms A A Ampere I 500 ms I 500 ms 1 For SCR application, use 000 ampere frame. Order terminals separately. Mounting hardware not included. 3 Ground fault equipped trip units available with remote indicating panel. Add R to catalog number, e.g., RGH316T35RW. 4 Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. 5 Unprotected left pole neutral. Add P to catalog number for 100% protected left pole neutral, add E for 60% protected, e.g., RGH416T33PW, RGH416T33EW. 6 Molded case switch will trip above 17,500 amperes. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Included with Breaker Adjustable Plug 4 Adjustable Ampere Settings RGC416T33WP08 RGC416T3WP RES08T 800/1000/ RES10T 100/1600 A16RES16T RES1T RES15T RES14T RES15T RES16T RGC40T33WP16 RGC40T3WP RES10T 1000/100/ 100 0RES1T 1600/000 A0RES0T1 150 A0RES15T 1400 A0RES14T 1600 A0RES16T 000 A0RES0T RGC45T33WP40 RGC45T3WP RES1T 100/1600/ 150 5RES15T 000/500 A5RES5T A5RES16T Molded Case Switches 6 Ampere of Poles RGK316WK RGK30WK RGK416WK RGK40WK 000 A5RES0T 500 A5RES5T Volume 4 Circuit Protection CA E February 01 V4-T-75

76 . Series G Type RG with Digitrip 610 and 910 Circuit Breaker Frame Including Digitrip RMS 610 and 910 Electronic Trip Unit with Plugs Order as Individual Component 1 Maximum Continuous Ampere at 40 C of Poles Long Delay Pickup Long Delay Time Short Time Range Short Time Delay Instantaneous Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) 1 Order terminals separately. Mounting hardware not included. Not to exceed 100 ampere ground fault pickup. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Digitrip RMS Interchangeable Plug (Order as Individual Component) LI LS LSI LIG LSG LSIG Fixed Plug x I n 0.5 I.0 n x I n x I n x I n x I n 4 Seconds 4 Seconds 4 Seconds 4 Seconds 4 Seconds 4 Seconds 6 x I r 6 x I r 6 x I r 6 x I r 6 x I r 6 x I r ms ms ms ms 6 x M1 and M 6 x M1 and M 6 x M1 and M 6 x M1 and M x I n x I n x I n Ampere ms ms ms Type RGH with Digitrip 610 High Interrupting Capacity U e Max. 690 Vac, 70 ka I cu at 415 Vac RGH316T61WP44 RGH316T63WP44 RGH316T6WP44 RGH316T64WP44 RGH316T65WP44 RGH316T66WP RP6R16A RP6R16A RP6R16A RP6R16A15 Includes 1600A rating plug 1600 RP6R16A RGH30T61WP49 RGH30T63WP49 RGH30T6WP49 RGH30T64WP49 RGH30T65WP49 RGH30T66WP RP6R0A RP6R0A RP6R0A RP6R0A160 Includes 000A rating plug 000 RP6R0A RGH35T61WP53 RGH35T63WP53 RGH35T6WP53 RGH35T64WP53 RGH35T65WP53 RGH35T66WP RP6R5A RP6R5A RP6R5A50 Type RGC with Digitrip 610 Very High Interrupting Capacity U e Max. 690 Vac, 100 ka I cu at 415 Vac RGC316T61WP44 RGC316T63WP44 RGC316T6WP44 RGC316T64WP44 RGC316T65WP44 RGC316T66WP RP6R16A RP6R16A RP6R16A RP6R16A15 Includes 1600A rating plug 1600 RP6R16A RGC30T61WP49 RGC30T63WP49 RGC30T6WP49 RGC30T64WP49 RGC30T65WP49 RGC30T66WP RP6R0A RP6R0A RP6R0A RP6R0A160 Includes 000A rating plug 000 RP6R0A RGC35T61WP53 RGC35T63WP53 RGC35T6WP53 RGC35T64WP53 RGC35T65WP53 RGC35T66WP RP6R5A RP6R5A00 Includes 500A rating plug 500 RP6R5A50 V4-T-76 Volume 4 Circuit Protection CA E February 01

77 Series G. Type RG with Digitrip 610 and 910, continued Circuit Breaker Frame Including Digitrip RMS 610 and 910 Electronic Trip Unit with Plugs Order as Individual Component 1 Maximum Continuous Ampere at 40 C of Poles Long Delay Pickup Long Delay Time Short Time Range Short Time Delay Instantaneous Ground Fault Pickup Ground Fault Delay L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) 1 Order terminals separately. Mounting hardware not included. Not to exceed 100 ampere ground fault pickup. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. Digitrip RMS Interchangeable Plug (Order as Individual Component) LI LS LSI LIG LSG LSIG Fixed Plug x I n 0.5 I.0 n x I n x I n x I n x I n 4 Seconds 4 Seconds 4 Seconds 4 Seconds 4 Seconds 4 Seconds 6 x I r 6 x I r 6 x I r 6 x I r 6 x I r 6 x I r ms ms ms ms 6 x M1 and M 6 x M1 and M 6 x M1 and M 6 x M1 and M x In x In x In Ampere ms ms ms Type RGH with Digitrip 910 High Interrupting Capacity U e Max. 690 Vac, 70 ka I cu at 415 Vac RGH316T91WP44 RGH316T93WP44 RGH316T9WP44 RGH316T94WP44 RGH316T95WP44 RGH316T96WP RP6R16A RP6R16A RP6R16A RP6R16A15 Includes 1600A rating plug 1600 RP6R16A RGH30T91WP49 RGH30T93WP49 RGH30T9WP49 RGH30T94WP49 RGH30T95WP49 RGH30T96WP RP6R0A RP6R0A RP6R0A RP6R0A160 Includes 000A rating plug 000 RP6R0A RGH35T91WP53 RGH35T93WP53 RGH35T9WP53 RGH35T94WP53 RGH35T95WP53 RGH35T96WP RP6R5A RP6R5A00 Includes 500A rating plug 500 RP6R5A50 Type RGC with Digitrip 910 Very High Interrupting Capacity U e Max. 690 Vac, 100 ka I cu at 415 Vac RGC316T91WP44 RGC316T93WP44 RGC316T9WP44 RGC316T94WP44 RGC316T95WP44 RGC316T96WP RP6R16A RP6R16A RP6R16A RP6R16A15 Includes 1600A rating plug 1600 RP6R16A RGC30T91WP49 RGC30T93WP49 RGC30T9WP49 RGC30T94WP49 RGC30T95WP49 RGC30T96WP RP6R0A RP6R0A RP6R0A RP6R0A160 Includes 000A rating plug 000 RP6R0A RGC35T91WP53 RGC35T93WP53 RGC35T9WP53 RGC35T94WP53 RGC35T95WP53 RGC5T96WP RP6R5A RP6R5A00 Includes 500 A rating plug 500 RP6R5A50 Volume 4 Circuit Protection CA E February 01 V4-T-77

78 . Series G Accessories Selection Guide and Ordering Information Line and Load Terminals R-Frame circuit breakers use Cu/Al terminals as standard and copper only terminals as an option. Specify if factory installation is required. Line and Load Terminals Maximum Breaker Amperes Terminal Body Material Wire Type RG Rear Connector Exploded View Hardware AWG/kcmil Wire Range/ of Conductors TA000RD Wire Terminal Note: Order one TA000RDM kit per three poles. number includes bus connection, terminals and hardware for either line side or load side of three-pole breaker. Metric Wire Range mm Wire Terminals 1600 Aluminum Cu/Al Metric (4) TA1600RDM Copper Cu Metric (4) T1600RDM Aluminum Cu/Al Metric 600 (6) TA000RDM Rear Connectors 000 Copper Metric B016RDM Copper Metric B016RDLM Copper Metric B500RDM 1 Conductor (Viewed from Rear of Circuit Breaker and Cut Away for Clarity) Rear Connector (Cu) B016RDM B016RDLM (For 100% Application) (For 1600A and 000A Frames) B500RDM for 500A Breaker Line/Load Conductors Conductor (Viewed from Front of Circuit Breaker) Securing Hardware Securing Hardware Cu Only Terminal T1600RDM 3 (For 1600A Frame Only) OR Al/Cu Terminal TA1600RDM 3 (For 1600A Frame Only) Base Mounting Hardware Supplied by customer. Handle Extension Included with breaker. Additional handle extensions are available. Handle Extension Description Single handle extension HEX6 1 Order one per pole single terminals individually packed. Order one TA000RD kit per three poles. number includes bus connection, terminals and hardware for either line side or load side of three-pole breaker. 3 For use with 500A Frame. Do not order separately unless for replacement purposes. Included in breaker carton when 500A frame is ordered. RG MCCBs have metric threading on line and load conductors. Use RD MCCBs if imperial threading is required. V4-T-78 Volume 4 Circuit Protection CA E February 01

79 Series G. Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. RG-Frame Accessories Description Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Note 1 Contact Eaton. Reference Page Three-Pole Four-Pole Left Center Right Left Center Right Neutral Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-104 Auxiliary switch (1A, 1B) V4-T-104 Auxiliary switch (A, B) V4-T-104 Auxiliary switch and alarm switch combination V4-T-104 Shunt trip standard V4-T-104 Undervoltage release mechanism V4-T-105 External Accessories Base mounting hardware V4-T-78 Padlockable handle lock hasp V4-T-10 Key interlock kit V4-T-10 Electrical operator V4-T-10 Handle mechanisms V4-T-110 Drawout cassette V4-T-109 Handle extension V4-T-78 Digitrip 310 test kit V4-T-10 Modifications (Refer to Eaton) Moisture fungus treatment V4-T-100 Freeze-tested circuit breakers Marine/naval application, UL 489 Supplement SA and SB 1 Volume 4 Circuit Protection CA E February 01 V4-T-79

80 . Series G Technical Data and Specifications UL 489/CSA Interrupting Capacity s 1 Circuit Breaker Type of Poles IEC 947- Interrupting Capacity s 1 1 Utilization Category A circuit breakers. See Page V4-T-70 for trip unit specifications. Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) RGH 3, RGC 3, Circuit Breaker Type of Poles Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) RGH 3, 4 I cu I cs RGC 3, 4 I cu I cs V4-T-80 Volume 4 Circuit Protection CA E February 01

81 Series G. Dimensions and Weights Approximate Dimensions in Inches (mm) RG-Frame of Poles Width Height Depth (393.7) (406.4) 9.75 (47.7) (508.0) (406.4) 9.75 (47.7) (368.3) 0.16 R (4.1) Front Cover Cutout C L Breaker 7.5 (184.) Front View 3-Pole Side View.5 (57.) 9.70 (46.4) 5.10 (19.5) C L Handle 7.75 (196.9) (406.4) (381.0) 8.5 (09.6).44 R (11.) Tee Connectors May Be Rotated (330.) 4 Holes 0.44 Dia. (11.) 6.57 (166.9) (333.5) (393.7) 9.00 (8.6) 6.75 (171.5) Approximate Shipping Weight in Lbs (kg) RG-Frame Breaker Type Complete Breaker of Poles Three-Pole Four-Pole 1600 Amperes RGH, RGC 10 (46.3) 135 (61.) 000 Amperes RGH, RGC 10 (46.3) 135 (61.) 500 Amperes RGH, RGC 135 (61.) 18 (8.6) Volume 4 Circuit Protection CA E February 01 V4-T-81

82 . Series G Motor Circuit 480 Vac, Protectors Motor Circuit Protectors (MCP) Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) Product Selection Guide and Ordering Information V4-T-83 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 V4-T-8 Volume 4 Circuit Protection CA E February 01

83 Series G. Product Selection Guide and Ordering Information EG-Frame 480 Vac, 600Y/347 Vac Maximum 1 Continuous Amperes Cam Setting Motor Full Load Current Amperes MCP Trip Setting 3 MCP 3 A HMCPE003A0C B C D.0. 7 E F A HMCPE007C0C B C D E F A HMCPE015E0C B C D E F A HMCPE030H1C B C D E F UL listed for use with Eaton Motor Starters. Motor FLA ranges are typical. The corresponding trip setting is at 13 times the minimum FLA value shown. Where a 13 times setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. 3 For DC applications, actual trip levels are approximately 40% higher than values shown. Volume 4 Circuit Protection CA E February 01 V4-T-83

84 . Series G EG-Frame 480 Vac, 600Y/347 Vac Maximum, continued 1 Continuous Amperes Cam Setting Motor Full Load Current Amperes JG-Frame 600 Vac Maximum, 50 Vdc Maximum 1 MCP Trip Setting 3 MCP 50 A HMCPE050KC B C D E F A HMCPE070MC B C D E F A HMCPE100R3C B C D E F A HMCPE100T3C B C D E F Continuous Amperes MCP Trip Range (Amperes) MCP HMCPJ50D5L HMCPJ50F5L HMCPJ50G5L HMCPJ50J5L HMCPJ50K5L HMCPJ50L5L HMCPJ50W5L 1 UL listed for use with Eaton Motor Starters. Motor FLA ranges are typical. The corresponding trip setting is at 13 times the minimum FLA value shown. Where a 13 times setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. 3 For DC applications, actual trip levels are approximately 40% higher than values shown. 4 Settings above 10 x I n are for special applications. Where the ampere rating of the disconnecting means cannot be less than 115% of the motor full load ampere rating. V4-T-84 Volume 4 Circuit Protection CA E February 01

85 Series G. LG-Frame 600 Vac Maximum, 50 Vdc Maximum 1 Continuous Amperes MCP Trip Range (Amperes) MCP HMCPL600L6G HMCPL600N6G HMCPL600R6G HMCPL600X6G HMCPL600Y6G HMCPL600P6G HMCPL600M6G 1 UL listed for use with Eaton Motor Starters. 800 and 100 ampere, 600 Vac maximum motor circuit protectors are available as HMCP product. Volume 4 Circuit Protection CA E February 01 V4-T-85

86 . Series G Series G Motor Protector Circuit Breakers (MPCB) Motor Protector Circuit Breakers (MPCB) Product Description Application Description Eliminates need for separate overload relay Can be used with contactor to eliminate need for overload relay and still create manual motor control Meets requirement for motor branch protection, including: Disconnecting means Branch circuit short circuit protection Overload protection Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) Product Selection V4-T-87 Technical Data and Specifications V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Features and Benefits Phase unbalance protection Phase loss protection Hot trip/cold trip High load alarm Pre-detection trip relay option Class 10, 15, 0, 30 protection Standards and Certifications IEC UL % rated UL 508 CSA C. V4-T-86 Volume 4 Circuit Protection CA E February 01

87 Series G. Product Selection JGMP s Continuous Amperes JGMP FLA le Dial Setting Continuous Amperes A B C D E F G H LGMP s LGMP FLA le Dial Setting Continuous Amperes A B C D E F G H amperes is not a UL listed rating. 600 amperes is the maximum UL or CSA for LG breaker. For pre-trip alarm option, order Style 571B31G0. For additional breaker solutions, see Page V4-T kaic 65 kaic 50 JGMPS050G JGMPH050G 100 JGMPS100G JGMPH100G 160 JGMPS160G JGMPH160G 50 JGMPS50G JGMPH50G Continuous Amperes 50 kaic 65 kaic 50 LGMPS50G LGMPH50G 400 LGMPS400G LGMPH400G 600 LGMPS600G LGMPH600G LGMPS630G LGMPH630G Volume 4 Circuit Protection CA E February 01 V4-T-87

88 . Series G Technical Data and Specifications JGMPS and JGMPH and Ampere Range Maximum Rated Current 50A Breaker Type Breaker Capacity (ka rms) AC Hz JGMPS JGMPH IEC Vac I cu I cs Vac I cu I cs Vac I cu 1 14 I cs 6 7 NEMA UL Vac Vac Vac 5 35 of poles 3 3 Ampere range LGMPS and LGMPH and Ampere Range Maximum Rated Current 630A 1 Breaker Type Breaker Capacity (ka rms) AC Hz LGMPS LGMPH IEC Vac I cu I cs Vac I cu I cs Vac I cu 0 5 I cs NEMA UL Vac Vac Vac 5 35 of poles 3 3 Ampere range amperes is not a UL listed rating. 600 amperes is the maximum UL or CSA for LG breaker. For pre-trip alarm option, order Style 571B31G0. V4-T-88 Volume 4 Circuit Protection CA E February 01

89 Series G. 30 ma Ground Fault (Earth Leakage) Modules Contents Description EG-Frame (15 15 Amperes) JG-Frame (63 50 Amperes) LG-Frame ( Amperes) NG-Frame ( Amperes) RG-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protector Circuit Breakers (MPCB) ma Ground Fault (Earth Leakage) Modules Product Selection Dimensions Current Limiting Circuit Breaker Modules High Instantaneous Circuit Breaker for Selective Coordination Special Features and Accessories Motor Operators Plug-In Blocks Clockwise from Left: JG, LG, EG MCCBs Shown with Drawout Cassette Ground Fault (Earth Leakage) Module Handle Mechanisms ma Ground Fault (Earth Leakage) Modules Product Description Eaton offers a three- and fourpole 30 ma ground fault (earth leakage) protection module for Series G E-, J- and L-Frame breakers. UL -listed modules are available for E, J and L molded case circuit breakers (MCCBs). The modules are bottom mounted for circuits up to 15A (E- Frame) 160 and 50 amperes (J-Frame), or 400 and 630 amperes for the L-Frame. The module is completely selfcontained because the current sensor, relay and power supply are located inside the product. Current pickup settings are selectable from amperes for all IEC-rated modules and E and J UL-listed module, and amperes for the L ULlisted modules. Time delays are also selectable from Instantaneous 1.0 seconds for 0.10 ampere settings and above. A current pickup setting of 0.03 amperes defaults to an Instantaneous time setting regardless of the time dial s position. Two alarm contacts come as standard: a 50% pretrip and a 100% after trip, both based only on earth leakage current levels. UL-Rated LG-Frame Earth Leakage Module Faceplate IEC-Rated LG-Frame Earth Leakage Module Faceplate Page V4-T-15 V4-T-9 V4-T-45 V4-T-61 V4-T-70 V4-T-8 V4-T-86 V4-T-90 V4-T-91 V4-T-93 V4-T-96 V4-T-99 V4-T-106 V4-T-108 V4-T-109 V4-T-110 Volume 4 Circuit Protection CA E February 01 V4-T-89

90 . Series G Product Selection EG-Frame EG-Frame Ground Fault Modules, UL-Rated (Bottom Mounted, Vac, 50/60 Hz) 1 Ampere of Poles 15 3 ELEBN315G LG-Frame LG-Frame Ground Fault Modules, UL-Rated (Bottom Mounted, Vac, 50/60 Hz) Ampere of Poles ELLBN3400W 15 4 ELEBN415G ELLBN4400W ELLBN3600W ELLBN4600W EG-Frame Earth Leakage Modules, IEC-Rated (Bottom Mounted, Vac, 50/60 Hz) Ampere of Poles 15 3 ELEBE315G 15 4 ELEBE415G LG-Frame Earth Leakage Modules, IEC-Rated (Bottom Mounted, Vac, 50/60 Hz) Ampere of Poles ELLBE3400W ELLBE4400W JG-Frame JG-Frame Ground Fault Modules, UL-Rated (Bottom Mounted, Vac, 50/60 Hz) ELLBE3630W ELLBE4630W Ampere of Poles ELJBN3150W ELJBN4150W 50 3 ELJBN350W 50 4 ELJBN450W JG-Frame Earth Leakage Modules, IEC-Rated (Bottom Mounted, Vac, 50/60 Hz) Ampere of Poles ELJBE3160W ELJBE4160W 50 3 ELJBE350W 50 4 ELJBE450W Note 1 Shunt trip and undervoltage release cannot be used in an EG breaker connected to an earth leakage module. V4-T-90 Volume 4 Circuit Protection CA E February 01

91 Series G. Dimensions Approximate Dimensions in Inches (mm) Assembled Breaker and Earth Leakage Module Frame Height Width Depth Three-Pole EG 10.5 (60.3) 3.00 (76.).98 (75.8) JG 11.5 (85.8) 4.13 (104.9) 3.57 (90.7) LG (390.7) 5.48 (139.) 4.06 (103.1) Four-Pole EG 10.5 (60.3) 4.00 (101.6).98 (75.8) JG 11.5 (85.8) 5.50 (139.7) 3.57 (90.7) LG (390.7) 7.3 (183.6) 4.06 (103.1) EG-Frame With Earth Leakage Module 10.6 (60.6) 8.59 (18.) 4.78 (11.4) 4.75 (10.6) 0.55 (14.0) 0.70 (17.8) 0.90 (.9) 0.35 (8.9) 0.09 (.9) 0.50 (1.7).75 (69.9) 1.00 (5.4) 1.00 (5.4) (38.1) (1.7) 0.78 (19.8) 3.01 (76.5) 1.49 (37.8).00 (50.8) 3.17 (80.5) 3-Pole.98 (75.7) 3.98 (101.1) Volume 4 Circuit Protection CA E February 01 V4-T-91

92 . Series G JG-Frame With Earth Leakage Module 3.9 (99.6) 1.38 (35.1) 4-Pole 5.50 (139.7) 3-Pole 4.13 (104.9) 0.69 (17.5).06 (5.3) 5.50 (139.7) 7.00 (177.8) 11.5 (85.8) 3.57 (90.7) 3.9 (99.6) 5.50 (139.7) 1.5 (31.8) R 0.19 (4.8) 0.50 (139.7) 0.8 (7.1) 0.63 (16.0).05 (5.1) 1.88 (47.8) 4.93 (15.) 1.06 (6.9) 6.97 (177.0) 11.5 (85.8) RESET TEST 4.5 (108.0) 3.37 (85.6) 3.31 (84.1) LG-Frame With Earth Leakage Module 5.16 (131.1) 3.44 (87.4) 1.7 (43.7) 3.69 (93.7) 4.78 (11.4) 3.57 (90.7) 3.81 (96.8) 4.31 (109.5) 4.06 (103.1) 3.98 (101.1).05 (5.1) 4.09 (103.9) 3.44 (87.4) 1.7 (43.7) 0.86 (1.8) 4.73 (10.1) 5.58 (141.7) 5.58 (141.7) 4.73 (10.1) (347.7) 8.44 (14.4) (57.3) (390.7) (390.7) 8.44 (14.4) (347.5) 3-Pole 5.48 (139.) 4-Pole 7. (183.4) 4-Pole.75 (69.9) 3-Pole.74 (69.6) 3.97 (100.8) 4.30 (109.) 4.55 (115.6) 5.43 (137.9) 4-Pole 7. (183.4) 3-Pole 5.48 (139.) 4-Pole.75 (69.9) 3-Pole.74 (69.6) V4-T-9 Volume 4 Circuit Protection CA E February 01

93 Series G. Current Limiting Circuit Breaker Modules Current Limiting Circuit Breaker Modules Product Overview Product Description Power demand continues to grow in new and existing facilities. To meet increased demand, larger utility supplies, spot networks and large facility transformers are installed. The increased capacity of the electrical source provides increased fault currents. In the past, 65 ka and 100 ka overcurrent protective devices may have suited the job. The new systems require in excess of 100 ka short-circuit protection. Eaton manufactures non-fused current limiting modules with interrupting capacities up to 150 ka at 480 Vac. Unlike fused current limiters with a one-time use, the current limiter module provides automatic reset of the module after interruption. Reset the molded case circuit breaker to restore power to the system without worry of finding the correct replacement fuse. The current limiting breaker modules use a reverse loop stationary contact arm. When high short-circuit current is flowing through the contacts of these modules, the positions of the reverse loop and moving contact arm induce opposing magnetic fields. The resulting flux lines cause rapid contact blow-apart under fault conditions, resulting in very high interrupting capacities and providing current limiting characteristics. Current limiting breaker modules, in combination with Series G E-Frame breakers, are available from 15A through 100A and have an interrupting rating up to 100 ka at 600 Vac. Application Description These breakers are most commonly applied when very high fault levels are available and with applications where the current limiting capability is used upstream of the final load to limit current to the load. Typical loads include lighting and power distribution, and motor controller applications. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 Product Selection V4-T-94 Dimensions V4-T-95 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Features and Benefits The combination of the Series G E-Frame current limiting breaker or HMCP and the current limiter module provides the following system protection: Overloads, by using inverse time current tripping characteristics of the molded case circuit breaker Low-level short circuits, by using instantaneous and/or short-time delay tripping characteristics of the molded case circuit breaker High-level short circuits, by using ultra-high-speed, blow-apart contacts of the current limiting module in series with the circuit breaker contacts. The highlevel current limiting action is achieved by the use of special design, blow-apart contacts. The opening speed of the contacts is amplified by the repulsion force in the slot motor and reverse loop stationary contact arm to effectively separate the contacts under high-level fault conditions in less than one millisecond. The rapid rise of arc voltage introduces impedance into the system, thus limiting the amount of the otherwise available fault current Volume 4 Circuit Protection CA E February 01 V4-T-93

94 . Series G Product Selection EG-Frame EG UL Listed (NEMA/IEC Rated) Base Molded Case Circuit Breaker HMCP Motor Circuit Protector Note Breaker with Line Side Mounted Current Limiter Breaker with Load Side Mounted Current Limiter Line and Load Terminations Included 1 EGC3015FFG EGC3015FFGQ01 EGC3015FFGQ0 T15EF EIPBSK EGC3016FFG EGC3016FFGQ01 EGC3016FFGQ0 T15EF EIPBSK EGC300FFG EGC300FFGQ01 EGC300FFGQ0 T15EF EIPBSK EGC305FFG EGC305FFGQ01 EGC305FFGQ0 T15EF EIPBSK EGC3030FFG EGC3030FFGQ01 EGC3030FFGQ0 T15EF EIPBSK EGC303FFG EGC303FFGQ01 EGC303FFGQ0 T15EF EIPBSK EGC3035FFG EGC3035FFGQ01 EGC3035FFGQ0 T15EF EIPBSK EGC3040FFG EGC3040FFGQ01 EGC3040FFGQ0 T15EF EIPBSK EGC3045FFG EGC3045FFGQ01 EGC3045FFGQ0 T15EF EIPBSK EGC3050FFG EGC3050FFGQ01 EGC3050FFGQ0 T15EF EIPBSK EGC3060FFG EGC3060FFGQ01 EGC3060FFGQ0 T15EF EIPBSK EGC3063FFG EGC3063FFGQ01 EGC3063FFGQ0 T15EF EIPBSK EGC3070FFG EGC3070FFGQ01 EGC3070FFGQ0 T15EF EIPBSK EGC3080FFG EGC3080FFGQ01 EGC3080FFGQ0 T15EF EIPBSK EGC3090FFG EGC3090FFGQ01 EGC3090FFGQ0 T15EF EIPBSK EGC3100FFG EGC3100FFGQ01 EGC3100FFGQ0 T15EF EIPBSK Breaker with Line Side Mounted Current Limiter Breaker with Load Side Mounted Current Limiter Line and Load Terminations Included 1 HMCPE003A0C HMCPE003A0CQ01 HMCPE003A0CQ0 T15EF EIPBSK HMCPE007C0C HMCPE007C0CQ01 HMCPE007C0CQ0 T15EF EIPBSK HMCPE015E0C HMCPE015E0CQ01 HMCPE015E0CQ0 T15EF EIPBSK HMCPE030H1C HMCPE030H1CQ01 HMCPE030H1CQ0 T15EF EIPBSK HMCPE050KC HMCPE050KCQ01 HMCPE050KCQ0 T15EF EIPBSK HMCPE070MC HMCPE070MCQ01 HMCPE070MCQ0 T15EF EIPBSK HMCPE100R3C HMCPE100R3CQ01 HMCPE100R3CQ0 T15EF EIPBSK HMCPE100T3C HMCPE100T3CQ01 HMCPE100T3CQ0 T15EF EIPBSK Interphase Barrier Included for Limiter Interphase Barrier Included for Limiter 1 Two interphase barriers required on line end mounted limiter; () line end of limiter. Four interphase barriers required on load end mounted limiter; () line end of breaker () load end of limiter. V4-T-94 Volume 4 Circuit Protection CA E February 01

95 Series G. Dimensions Approximate Dimensions in Inches (mm) Assembled Breaker and Current Limiting Module Frame Height Width Depth EG 9.66 (45.7) 3.00 (76.).98 (75.8) HMCP 9.66 (45.7) 3.00 (76.).98 (75.8) EG-Frame With Current Limiter Module 3.00 (76.) 1.00 (5.4) 1.00 (5.4).75 (69.9) 1.00 (5.4) 0.56 (14.) 0.09 (.3) 0.41 (10.4) 0.50 (1.7) 0.78 (19.8) 4.17 (105.9) 3.61 (91.7) 3.0 (81.3) 4.17 (105.9) 9.66 (45.4) Volume 4 Circuit Protection CA E February 01 V4-T-95

96 . Series G High Instantaneous Circuit Breaker for Selective Coordination High Instantaneous Circuit Breaker for Selective Coordination Product Description Eaton s Electrical Sector introduces new high-magnetic withstand molded case circuit breakers, specifically designed for critical operations and selective coordination requirements. The highmagnetic withstand LHH and NHH frames continue the legacy of circuit breaker innovation for which Eaton is recognized throughout the world. The LHH and NHH breakers are equipped with 15 to 400 ampere trip units with high-magnetic capability. This design enables the breakers to withstand up to 90 times rated current before opening under shortcircuit conditions. The LHH and NHH circuit breakers incorporate a higher level of instantaneous pickup, thus allowing for higher current levels of selective coordination. Standard molded case circuit breakers typically are furnished with a magnetic pickup or electronic instantaneous adjustment or instantaneous override set at 10 times (10x) the continuous trip rating. Features, Benefits and Functions Eaton s new LHH and NHH molded case circuit breakers are furnished with a higher level of magnetic pickup or electronic instantaneous settings as indicated in table on Page V4-T-98. These higher levels of magnetic pickup and electronic instantaneous values in turn allow the system designer to obtain selective coordination at fault current levels up to these higher ratings. Greater values of selective coordination are available based on manufacturer tested combinations using the LHH and NHH as lineside breakers and standard breakers as load-side devices. Refer to IA010000E to determine the maximum fault values that selective coordination achieves. When the line-side and load-side molded case circuit breaker trip ratings are chosen to coordinate in the overload range, they also can be selectively coordinated in the fault range up to the values listed in the table on Page V4-T-98 or IA010000E. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination Product Selection V4-T-97 Technical Data and Specifications V4-T-98 Dimensions V4-T-98 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 For overcurrents protected by circuit breakers on the load-side of the LHH or NHH, only the effected load-side circuit breaker will open, while the line-side LHH and/ or NHH circuit breakers remain closed, thus providing continuity of power to the other critical loads supplied by the LHH or NHH circuit breakers. Benefits of Using the LHH and NHH Molded Case Circuit Breakers Customer expectations and codes are driving product development to protect customers critical operations. NEC 005 and 008 requires circuits with elevators, emergency systems, legally required standby systems, health care essential systems and critical operation power systems to be selectively coordinated. Simply stated, only the closest protective device directly protecting the circuit having an overcurrent (overload or fault) condition should open. All other overcurrent protective devices within these systems shall remain closed. Similarly, backup power system designs of a critical nature that are not code mandated may also require overcurrent protective devices to be selectively coordinated as much as practicable to provide a higher level of uptime. V4-T-96 Volume 4 Circuit Protection CA E February 01

97 Series G. Proven Technology and Performance The LHH is based on the Series G L-Frame circuit breaker, sharing the same small footprint and field-fit accessories as the L-Frame breaker. The NHH is based on the Series G N-Frame circuit breaker and shares the same footprint and accessories as the N-Frame breaker. NHH accessories must be factory installed. The LHH incorporates a thermal-magnetic trip unit with fixed thermal and fixed magnetic settings. The NHH has an OPTIM electronic trip unit with LSI adjustment capabilities. The instantaneous setting is adjustable from A or may be turned off to default to the frame override of 14,000A. A hand-held OPTIMizer must be used with the NHH to adjust short-time delay and instantaneous, however, the long delay pickup is fixed and cannot be adjusted. The LHH and NHH breakers are available in Eaton s panelboards and switchboards. Standards and Certifications UL CSA Product Selection LHH LHH and NHH s Thermal-Magnetic Trip Unit LSI Electronic Trip Unit Ampere LHH Frame NHH Frame 15 LHH315FFG 150 LHH3150FFG NHH3150T5X LHH3175FFG NHH3175T5X15 00 LHH300FFG NHH300T5X15 5 LHH35FFG NHH35T5X15 50 LHH350FFG NHH350T5X LHH3300FFG NHH3300T5X LHH3350FFG NHH3350T5X LHH3400FFG Volume 4 Circuit Protection CA E February 01 V4-T-97

98 . Series G Technical Data and Specifications Three-pole 65 kaic at 480 Vac ampere LHH ampere NHH Trip units: LHH thermal-magnetic NHH LSI electronic trip unit No rating plugs required Factory-sealed breakers LHH uses same internal and external accessories as standard Series G L-Frame circuit breaker NHH uses same internal and external accessories as standard Series G N-Frame circuit breaker LHH and NHH Electrical Characteristics Short-Circuit Current s (ka rms) AC Hz Continuous Current s Breaker Type Description LHH NHH Max. rated current (amperes) NEMA UL Vac Vac Vac Vac 4 IEC Vac Vac Vac /50 Vdc of poles 3 3 Ampere range A A Continuous Current (I r ) Magnetic Trip Point Continuous Current Multiplier Instantaneous Trip Point Continuous Current Multiplier Short Delay Pickup 15A 500A 0x 150A 500A 16x 14,000A 93x 5 100A 175A 4000A x 14,000A 80x A 00A 4000A 0x 14,000A 70x A 5A 6000A 6x 14,000A 6x A 50A 6000A 4x 14,000A 56x A 300A 6000A 0x 14,000A 47x A 350A 6000A 17x 14,000A 40x A 400A 6000A 15x Dimensions Approximate Dimensions in Inches (mm) Dimensions Description Height Width Depth L-Frame N-Frame Weight in Lbs (kg) LHH (57.3) 5.48 (139.) 4.09 (103.9) 1.36 (5.6) NHH (406.4) 8.5 (09.5) 5.50 (139.7) (1.) R 0.5 (6.4).00 (50.8).69 (68.3) 5.38 (136.7).43 (61.7) Breaker 3.16 (80.3) Front Cover Cutout 3.44 (87.4) R 0.5 (6.4) 1.50 (38.1) 6.38 (16.1) C L C L 1.9 (48.8) Breaker 1.91 (48.5) 3.68 (93.5) 3.19 (81.0) 5.48 (139.) 5.58 (141.7) Four-Pole Front View Three-Pole 8.5 (09.6) 9.5 (35.0) 4.06 (103.1) (57.3) Side View 5.50 (139.7) (406.4) V4-T-98 Volume 4 Circuit Protection CA E February 01

99 Series G. Special Features and Accessories Eaton s molded case circuit breakers are designed to provide circuit protection for low voltage distribution systems. They are described by NEMA as,... a device for closing and interrupting a circuit between separable contacts under both normal and abnormal conditions, and furthermore as,... a breaker assembled as an integral unit in a supporting and enclosing housing of insulating material. The National Electrical Code (NEC ) describes them as, A device designed to open and close a circuit by nonautomatic means, and to open the circuit automatically on a predetermined overload of current, without injury to itself when properly applied within its rating. So designed, Eaton circuit breakers protect conductors against overloads and conductors and connected apparatus, such as motors and motor starters, against short circuits. In low voltage distribution systems, there are many varied applications of molded case circuit breakers. Eaton offers the most comprehensive family of molded case circuit breakers in the industry. This section of circuit breakers includes: Thermal-magnetic trip breakers Electronic rms trip breakers Molded case switches Motor circuit protectors Current limiting breakers Special application breakers Modified Breakers Eaton breakers can be ordered with internal accessories installed. These modified breakers will be subject to an addition charge. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories Internal Accessories V4-T-101 External Accessories and Test Kit V4-T-10 Accessories V4-T-104 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Special Calibration Special non-ul listed calibrations are available for certain ambient temperatures other than 40 C and for frequencies other than 50/60 Hz or DC. Reduced interrupting ratings will apply for 400 Hz applications. Add suffix H01 to breaker catalog number for 400 Hz rating 50ºC Calibration Note: Breakers equipped with electronic trip units can operate reliably in ambient temperatures of 50 C. Add suffix V3 to NG MCCBs to remove standard 40 C labeling. Add suffix V to catalog number for complete thermal magnetic breaker when ordering listed ampere ratings for breakers to be used in 50ºC ambients. 50ºC ambient MCCBs are not UL listed. Contact Eaton for availability. Calibrations and Treatment Frame Description EG JG LG NG RG Special calibration Moisturefungus treatment Volume 4 Circuit Protection CA E February 01 V4-T-99

100 . Series G Moisture-Fungus Treatment All Eaton circuit breaker cases are molded from glasspolyester, which does not support the growth of fungus. Any parts that are susceptible to the growth of fungus will require special treatment. Order by description. Add suffix J01 to breaker catalog number Freeze-Tested Circuit Breakers The circuit breakers may be ordered with freeze testing. This option uses special lubrication and mechanical operation is verified at 40 C. Add suffix F01 to catalog number 57 F, F0 30 F Marine Applications E- to R-Framed circuit breakers can be supplied to meet the following marine specifications: U.S. Coast Guard CFR 46; ABS American Bureau of Shipping; IEEE 45; DNV; and Lloyds These specifications generally require molded case circuit breakers to be supplied with 50 C ambient, and plug-in adapter kits. When plug-in adapter kits are used, no terminals need be supplied (switchboard applications). Circuit breakers can also be supplied to meet UL 489 Supplement SA (Marine use) and UL 489 Supplement SB (Naval Use). UL 489 Supplement SA applies to vessels over 65 feet (19.8m) in length. Requirements include 40 C ambient calibration, special labeling, and no use of aluminum conductors or terminals. (No 50 C.) Add suffix H08 Or you can choose to add 50ºC ambient but then there is no UL mark. Add suffix VH08 UL 489 Supplement SB requires partial 50 C ambient calibration, vibration testing, special nameplating and no use of aluminum conductors or terminals. Eaton chooses to always fully calibrate to 50 C ambient. ( Naval labeled per UL but no UL mark due to 50 C label.) Add suffix VH09 Certified Test Reports Eaton breakers can be ordered with certified test reports at the time of order entry. Test report documents the thermal and magnetic or electronic tripping characteristics of the individual breaker. Breaker and test report must be ordered together. Add suffix 1 to breaker catalog number and enter separate line item on order for certified test report. Standards and Certifications Molded case circuit breakers are designed to conform with the following standards: Underwriters Laboratories Inc., Standard UL 489, molded case circuit breakers and circuit breaker enclosures National Electrical Manufacturers Association (NEMA) Standards Publication No. AB1-1993, molded case circuit breakers Australian Standard AS 184, molded case circuit breakers British Standards Institution Standard BS 475: Part 1, switchgear and control gear Part 1: circuit breakers Canadian Standards Association (CSA) Standard C. No. 5, service entrance and branch circuit breakers International Electrotechnical Commission Recommendations IEC , circuit breakers Japanese T-Mark Standard molded case circuit breakers South African Bureau of Standards, Standard SABS 156, Standard Specification for molded case circuit breakers Swiss Electro-Technical Association Standard SEV 157-1, safety regulations for circuit breakers Union Technique de l Electricite Standard NF C 63-10, low voltage switchgear and control gear circuit breaker requirements Verband Deutscher Elektrotechniker (Association of German Electrical Engineers) Standard VDE 0660, low voltage switchgear and control gear, circuit breakers Conformance with these standards satisfies most local and international codes, assuming user acceptability and simplified application. Molded case circuit breakers equal or exceed Federal Specification Classification W-C-375b requirements for the particular class associated with the circuit breaker frame being considered. Open breakers do not have service entrance ratings. Service entrance rating is part of the enclosure. V4-T-100 Volume 4 Circuit Protection CA E February 01

101 Series G. Internal Accessories Alarm Lockout The alarm switches operate when the circuit breaker is tripped by a short circuit or overcurrent, but also when it is tripped by a shunt trip or undervoltage release. Auxiliary Switches Auxiliary switches are used for signaling and control purposes. The various functions of the auxiliary switches (changeover) are shown on Page V4-T-103. Shunt Trips The shunt trip is used for remote tripping. The coil of the shunt trip is rated only for short-time operation. It is not permissible with the circuit breaker open to apply a continuous opening command to the shunt trip in order to prevent the breaker from closing. This means that interlocking circuits with continuous commands may not be set up with shunt trips. Undervoltage Releases The circuit breaker cannot be closed until the undervoltage release is energized. If the release is not energized, the circuit breaker can only perform an idle switching operation. Frequent idle switching actions should be avoided as they shorten the endurance of the circuit breaker. Cause of Trip Display/Remote Mount Cause of Trip Display The Cause of Trip Display can be field-installed on any Digitrip RMS 310+ trip unit. The device provides breaker information through an LCD screen, such as cause of trip, phrase current, ground current and low loads. The display is ideal for troubleshooting common trips such as ground fault, long delay, and instantaneous/short delay. The DIGIVIEW version will provide a local display at the breaker without additional wiring by connecting directly onto the trip unit. The DIGIVIEWR06 version has a 6 foot cable that allows users to mount the display on the outside of an enclosure door and connect to the trip unit that is contained inside the enclosure. Cause of Trip Display/ Remote Mount Cause of Trip Display DIGIVIEW DIGIVIEWR06 Cause of Trip LED Module The Cause of Trip LED Module can be field-installed on any Digitrip RMS 310+ trip unit. The device provides a cause of trip indication via LED. The Cause of Trip LED Module connects directly onto the trip unit. When the breaker trips, the module indicates the cause of trip (long delay, short delay, instantaneous and ground) via LED indication. The module is reset after the breaker is reset. Cause of Trip LED Module TRIP-LED Volume 4 Circuit Protection CA E February 01 V4-T-101

102 . Series G External Accessories and Test Kit External Accessories Description Test Kit Fit Type Frame EG JG LG NG RG Non-padlockable handle block Field EFHB LKD4 Padlockable handle block Field EFPHB Padlockable handle block Field EFPHBOFF FJPHBOFF LBHPOFF off-only Padlockable handle lock hasp Field EFPLK FJPHL LPHL PLK5 HLK6 Padlockable handle lock hasp Field EFPHLOFF FJPHLOFF LPHLOFF PLK55OFF HLK6OFF off-only Kirk key interlock kit 1 Field KYKJG KYKLG KYK4 KYK6 Castell key interlock kit 3 Field CTKJG CTKLG CTK4 CTK6 Slide bar interlock 4 Field EFSBI FJSBI LGSBI SBK5 Walking beam interlock 4 Three-pole EG3WBI JG3WBI LG3WBI WBL5 WBL6 Four-pole EG4WBI JG4WBI LG4WBI WBL5 Electrical operator 5 10 Vac MOPEG40C MOPJG10C MOPLG10C EOP5T07 EOP6T08K 40 Vac MOPEG40C MOPJG40C MOPLG40C EOP5T11 EOP6T11K 4 Vdc MOPEG48D MOPJG4D MOPLG4D EOP5T1 48 Vdc MOPEG48D EOP5T EOP6T1K 15 Vdc MOPEG10C MOPJG10C MOPLG10C EOP5T6 0 Vdc MOPJG40C MOPLG40C 50 Vdc MOPJG40C MOPLG40C Plug-in adapters Three-pole PAD3E PAD3J PAD3L PAD53 Four-pole PAD4E PAD4J PAD4L Rear connecting studs 6 Field EFRCSDL FJRCSDL LRCS3WK (3P) EFRCSDS FJRCSDS LRCS4WK (4P) EFRCSWL FJRCSWL EFRCSWS FJRCSWS Description Fit Type Frame EG JG LG NG RG Electronic portable test kit 10V N/A MTST10V MTST10V STK STK 30V N/A MTST30V MTST30V 1 Provision only. See Page V4-T-339 for bolt projection dimensions. 3 Castell bolt mounting hole must be 10 mm. 4 Requires two breakers. 5 Contact Eaton for availability of operators for EG- and NG-Frames before December D = Imperial threads UL, W = metric threads IEC, L = long studs, S = short studs. V4-T-10 Volume 4 Circuit Protection CA E February 01

103 Volume 4 Circuit Protection CA E February 01 V4-T-103. Series G Accessory Configurations for EG RG Circuit Breakers Internal Accessory Configurations Contact Making by the Auxiliary and Alarm Switches as a Function of the Switching Position of the Circuit Breaker = For N and R-Frame Circuit Breakers Only

104 . Series G Accessories Field Fit Kit s Shunt Trip Standard ST a Alarm Lockout Pole Frame Description Location EG, JG and LG NG RG 1 Make/Break Left A1L5LPK Right ALM1M1BEPK A1L5RPK A1L6RPK Make/ Break Left AL5LPK Right ALMMBEPK 3 AL5RPK AL6RPK Auxiliary Switch Pole Frame Description Location EG, JG and LG NG RG 1 1A, 1B Left A1X5PK Right AUX1A1BPK A1X5PK A, B Left AX5PK Right AUXABPK AX5PK AX6RPK 3A, 3B Left A3X5LPK Right A3X5RPK 4A, 4B Left Right A4X6RPK Auxiliary Switch/Alarm Lockout Pole Frame Description Location EG, JG and LG NG RG 1 Left AA115LPK Right AUXALRMEPK 4 AA115RPK Shunt Trip Standard Pole Frame Description Location EG, JG and LG 7 NG RG 1 4 Vac/Vdc Left SNT060CPK SNT5LP03K Right SNT6P03K Vac Left SNT060CPK SNT5LP05K Right SNT6P05K 10 Vac Left SNT10CPK 5 SNT5LP11K Right SNT6P11K 40 Vac Left SNT10CPK 5 SNT5LP11K Right SNT6P11K 1 Vdc Left SNT01CPK Right Vdc Left SNT060CPK SNT5LP3K Right SNT6P3K Vac Left SNT480CPK 6 Right 0 50 Vdc or Vac SNT5LP14K SNT6P14K Vac SNT5LP18K SNT6P18K 1 All accessories mount in the RH cavity which will accept one each of shunt trip, UVR, auxiliary switch and alarm switch. Part number for JG and LG is ALM1M1BJPK. 3 Part number for JG and LG is ALMMBJPK. 4 Part number for JG and LG is AUXALRMJPK Vdc, 50/60 Hz Vdc, 50/60 Hz. 7 LH cavity not available for EG frame with earth leakage module. V4-T-104 Volume 4 Circuit Protection CA E February 01

105 Series G. Shunt Trip Low Energy Pole Frame Description Location EG, JG and LG NG RG 1 Left LST5LPK Right LST6RPK Undervoltage Release Mechanism Pole Frame Description Location EG, JG and LG 3 NG RG Vac Left UVR10APK UVH5LP08K Right UVH6RP08K Vac Left UVR40APK UVH5LP11K Right UVH6RP11K 4 Vdc Left UVR04DPK UVH5LP1K Right UVH6RP1K 4 Vac Left UVR04APK UVH5LP1K Right UVH6RP1K Vdc Left UVR048DPK UVH5LP3K Right UVH6RP3K Vac Left UVR048APK UVH5LP05K Right UVH6RP05K 10 Vdc Left UVR15DPK UVH5LP6K Right UVH6RP6K 0 50 Vdc Left UVR50DPK UVH5LP8K Right UVH6RP8K Vac Left UVR480APK UVH5LP9K Right UVH6RP9K Vac Left UVR600APK Right 1 Vdc Left UVH5LP0K Right UVH6RP0K 1 Vac Left UVH5LP0K Right UVH6RP0K 1 All accessories mount in the RH cavity which will accept one each of shunt trip, UVR, auxiliary switch and alarm switch. 4 Vdc only use UVH5LP03K (NG) UVH6RP03K (RG) for 4 Vac. 3 LH cavity not available for EG frame with earth leakage module. Volume 4 Circuit Protection CA E February 01 V4-T-105

106 . Series G Series G Motor Operators Motor Operators Product Description Eaton s motor operator mechanism enables local and remote ON, OFF and reset switching of a circuit breaker. The motor operator is mounted on the circuit breaker cover within the dimensions of the circuit breaker. The robust motor operators offer various voltages to maximize customer flexibility. Standard load transfer switching can be accomplished through the use of two circuit breakers fitted with motor operators and a mechanical interlock. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators Features, Benefits and Functions V4-T-107 Standards and Certifications V4-T-107 Product Selection V4-T-107 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 V4-T-106 Volume 4 Circuit Protection CA E February 01

107 Series G. Features, Benefits and Functions The motor operator provides special features for ease of customer use and status indication. The motor operator allows the circuit breaker to be opened, closed or reset remotely The motor operator contains a motor connected to a cam drive mechanism. The cam drives a slide mechanism to operate the circuit breaker handle Internal limit switches and relays are used to control motor operation to prevent overdriving the circuit breaker handle and motor overload conditions Manual Operating Key A key is provided to manually operate the circuit breaker A special pull-out locking mechanism provides a method for padlocking the circuit breaker handle in the OFF position The locking device will accept three padlock shackles with a maximum diameter of 1/4-inch (6.4 mm) each The cover provides visual status of the circuit breaker: ON, OFF or TRIPPED. A PUSH-TO-TRIP button allows the user to manually trip the breaker Turn the Key (clockwise only) Product Selection Motor Operators Frame Voltage Frequency Inrush Current Series G E-Frame Vac 50/60 Hz 1A MOPEG40C Vdc DC 1A MOPEG40C 4/48 Vdc DC 3A MOPEG48D F-Frame Vac 50/60 Hz 1A MOPFD40C Vac 50/60 Hz 1A MOPFD10C 0 50 Vdc DC 1A MOPFD40C Vdc DC 1A MOPFD10C 4 Vdc DC 3A MOPFD4D Series G J-Frame Vac 50/60 Hz 1A MOPJG40C Vac 50/60 Hz 1A MOPJG10C 0 50 Vdc DC 1A MOPJG40C Vdc DC 1A MOPJG10C 4 Vdc DC 3A MOPJG4D Series G L-Frame Vac 50/60 Hz A MOPLG40C Vac 50/60 Hz A MOPLG10C 0 50 Vdc DC A MOPLG40C Vdc DC A MOPLG10C 4 Vdc DC 6A MOPLG4D Circuit Breaker Status Indication Window PUSH-TO-TRIP Button Standards and Certifications The motor operators are UL and CSA listed, and CE marked. Volume 4 Circuit Protection CA E February 01 V4-T-107

108 . Series G LG Breaker with Plug-In Block Plug-In Blocks Product Description Plug-in adapters simplify installation and front removal of circuit breakers. Plug-ins are available for rear connection applications on three- and four-pole circuit breakers. Trip on drawout interlock kits are included. Stabs for EG, JG and LG plugins rotate 90 for flexible installation. Use terminal shields for IP30 protection. Product Selection Plug-In Blocks Breaker Frame of Poles Contents Note 1 Included with plug-in block. Trips the breaker when breaker is removed from plug-in block. Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 EG-, JG- and LG-Frame Plug-In Blocks EG 3 PAD3E EG 4 PAD4E JG 3 PAD3J JG 4 PAD4J LG 3 PAD3L LG 4 PAD4L Trip-On Drawout Interlock Kit 1 EG 3, 4 PIILEG JG 3, 4 PIILJG LG 3, 4 PIILLG Terminal Shields IP30 EG 3 EFTS3K EG 4 EFTS4K JG 3 FJTS3K JG 4 FJTS4K LG 3 LTS3K LG 4 LTS4K Position Switch EG 3, 4 PADILE JG 3, 4 PADILJ LG 3, 4 PADILL V4-T-108 Volume 4 Circuit Protection CA E February 01

109 Series G. Drawout Cassettes Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette Handle Mechanisms V4-T-110 Drawout Cassette Product Description The drawout cassette is available for use with JG, LG and NG, three- and four-pole breakers. Also available are drawout cassettes for use with the standard three-pole 65 and 100 ka/480 Vac, 1600 ampere and 000 ampere RG circuit breakers. The cassettes consist of two separate components: the movable mechanism, which attaches to the breaker, and the stationary mechanism, which houses in the cassette. The stationary mechanism is shipped separately for the RG frame breakers. For the JG, LG and NG drawout cassettes, all necessary parts for installation are included in the one catalog number. Features Features of the drawout cassettes for the JG, LG and NG include: Trip on drawout breaker will trip if it is in the ON position when withdrawn from the cassette Secondary terminal block the drawout cassettes include a secondary terminal block for easier access when wiring low voltage accessories, including shunts and undervoltage releases The drawout mechanism has three primary positions: Connected the breaker is fully connected to the primary stabs and secondary contacts Disconnected both the primary stabs and the secondary contacts are disconnected Withdraw the breaker can be removed from the cassette Product Selection JG Drawout Cassette LG Drawout Cassette JG, LG and NG Drawout Cassettes Breaker Frame of Poles JG 3 JG3DOM 4 JG4DOM LG 3 LG3DOM 4 LG4DOM NG 3 NG3DOM 4 NG4DOM Volume 4 Circuit Protection CA E February 01 V4-T-109

110 . Series G Handle Mechanisms Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms Flex Shaft V4-T-111 High Performance Rotary Handle Mechanisms.. V4-T-114 Universal Rotary V4-T-118 Direct (Close-Coupled) Handle Mechanisms... V4-T-10 Handle Mechanisms Product Overview Handle mechanisms are used to operate molded case circuit breakers, molded case switches and motor circuit protectors. They are available in three basic configurations Flange Mounted, Throughthe-Door and Direct (Close- Coupled) providing safe, dependable operation and ease of installation. Flange Mounted Flex Shaft Through-the-Door High performance rotary Universal rotary Direct (Close-Coupled) Universal direct Handle mechanisms are used on enclosed circuit breakers, control panels and motor control centers in many different applications. Eaton has a handle mechanism for virtually any need. V4-T-110 Volume 4 Circuit Protection CA E February 01

111 Series G. Handle Mechanisms Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules.... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Flex Shaft V4-T-111 Product Selection V4-T-11 Accessories V4-T-113 Dimensions V4-T-113 High Performance Rotary Handle Mechanisms... V4-T-114 Universal Rotary V4-T-118 Direct (Close-Coupled) Handle Mechanisms..... V4-T-10 Flex Shaft Product Description Flange-Mounted Handle Mechanisms Flange-mounted handle mechanisms mount on the flange of an enclosure door. The Flex Shaft is an extra heavy-duty mechanism that includes a flexible shaft in various lengths, 3 feet (0.9m) through 10 feet (3m) for use with various size enclosures. The Flex Shaft handle will accept up to three padlock shackles, each with a maximum diameter of 3/8 inch (9.5 mm). It can be used with Type1 fabricated enclosures. An optional handle is available for Flex Shaft that is suitable for use with Type 4 environments. Flex Shaft comes preset from the factory, requiring only minor field adjustments on installation, which takes about 10 minutes a significant time savings compared to installation of other types of flange handle mechanisms. The Flex Shaft mechanism also takes up less interior enclosure space than competitive designs, and the handle fits standard flange cutouts. Flex Shaft handle can be remotely mounted from breaker, where an operator can use it by funneling the cable through conduit. Standards and Certifications Flex Shaft is UL listed under File E64983 and meets CSA requirements. Volume 4 Circuit Protection CA E February 01 V4-T-111

112 . Series G Product Selection Note: Type 4X handle mechanisms are available. Add Suffix X to the complete. Flex Shaft Note: When selecting the length of shaft, ensure minimum bending radius of 4 inches (101.6 mm) is maintained to operate properly. Flex Shaft Flange-Mounted Handle Mechanisms 1 Breaker Frame 1 Three-pole only for EG-; three- and four-pole for JG- and LG-Frame. EG-, JG- and LG-Frame can be left- or right-hand mounted. Note: The standard method of shipment includes the mechanism preset at the factory; however, minor field adjustments may be required. Flexible Shaft Length in Feet (m) (0.6) 3 (0.9) 4 (1.) 5 (1.3) 6 (1.8) EG EHMFS0 EHMFS03 EHMFS04 EHMFS05 EHMFS06 JG N/A JHMFS03 JHMFS04 JHMFS05 JHMFS06 LG N/A LHMFS04 NG N/A N/A F5S04C F5S05C F5S06C RG N/A N/A F6S04 F6S05 F6S06 Breaker Frame Flexible Shaft Length in Feet (m) 7 (.1) 8 (.4) 9 (.7) 10 (3.1) EG EHMFS07 EHMFS08 EHMFS09 EHMFS10 JG JHMFS07 JHMFS08 JHMFS09 JHMFS10 LG LHMFS07 LHMFS10 NG N/A N/A N/A F5S10C RG N/A N/A N/A N/A V4-T-11 Volume 4 Circuit Protection CA E February 01

113 Series G. Accessories Handle Auxiliary Switch Early Break Design, 1A 1B Contact for Flex Shaft Breaker Frame EG JG LG Auxiliary contact changes state prior to parting of breaker contacts to allow for shutdown of equipment. Contacts mounted on breaker mechanism customer supplied wiring. UL Type IP Crossover UL Type IP Type 1 IP0 3R IP55 1 IP54 4/4X IP66 Dimensions AUX1EBFSEG AUX1EBFSJG AUX1EBFSLG Type 1 Safety Door Hardware for Flex Shaft (E- through R-Frame) 1 Handle Length in Inches (mm) C361KJ (101.6) C361KJ (15.4) C361KR Roller latch 3 1 Customer: Consult with box manufacturer for correct door hardware and any adapters required for assembly. The 1/4-inch x 1/-inch (6.35 x 1.7 mm) standard mill rectangular locking bar is not supplied with these kits. 3 Third roller latch for use with or 6.00-inch (101.6 or 15.4 mm) handle when three-point latching is required. Type 1 Safety Door Hardware for Flex Shaft (E- through R-Frame) 1 C361KJ4 C361KJ6 C361KR Volume 4 Circuit Protection CA E February 01 V4-T-113

114 . Series G Handle Mechanisms Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Flex Shaft V4-T-111 High Performance Rotary Handle Mechanisms... V4-T-114 Product Selection V4-T-115 Universal Rotary V4-T-118 Direct (Close-Coupled) Handle Mechanisms..... V4-T-10 High Performance Rotary Handle Mechanisms Product Description The high performance rotary handle mechanism uses a simple, yet robust design to make installation and operation easy. The external handle s key functional components are all metallic, ensuring reliability. The metalon-metal defeater between the handle and shaft prevents contaminant buildup that could impede operation, while UV and chemical agent resistant materials protect the handle from heat and fading in direct sunlight, as well as chemicals that may be introduced in harsh environments. In addition to its robust design features, the handle mechanism has stand-off support that allows for easy operation with a gloved hand. With a shallow profile, the handle can easily be used in applications where an internal or double door is required. The high performance external handle can accept padlocks or multi-hasp locks. The door is interlocked when padlocked and cannot be bypassed. Features Type 1, 1, 3R, 4 and 4X ratings Black/Blue or Red/Yellow external handle colors Three shaft lengths: 6, 1 and 4 inches Conveniently packaged as kit containing handle, shaft and mechanism Replacement parts are available separately Standards and Certifications The mechanisms for EG, JG and LG breakers have an internal handle that can be operated independent of door position, and locked-out to meet NFPA 79 and UL 508A disconnect requirements. V4-T-114 Volume 4 Circuit Protection CA E February 01

115 Series G. Product Selection Handle Mechanisms for Series G Frames External Handle in the Vertical Position External Handle with Padlocks Internal Handle Mechanism Complete Kits Type EG-Frame 1 JG-Frame LG-Frame NG-Frame Color UL IP Note 1 Compatible with three-pole and four-pole EG breakers only. Black/Blue 1/1/3R 0/54/55 EGHMVD06B JGHMVD06B LGHMVD06B NGHMVD08B EGHMVD1B JGHMVD1B LGHMVD1B EGHMVD4B JGHMVD4B LGHMVD4B Red/Yellow 1/1/3R 0/54/55 EGHMVD06R JGHMVD06R LGHMVD06R NGHMVD08R EGHMVD1R JGHMVD1R LGHMVD1R EGHMVD4R JGHMVD4R LGHMVD4R Black/Blue 4/4X 65 EGHMVD06BX JGHMVD06BX LGHMVD06BX NGHMVD08BX EGHMVD1BX JGHMVD1BX LGHMVD1BX EGHMVD4BX JGHMVD4BX LGHMVD4BX Red/Yellow 4/4X 65 EGHMVD06RX JGHMVD06RX LGHMVD06RX NGHMVD08RX EGHMVD1RX JGHMVD1RX LGHMVD1RX EGHMVD4RX JGHMVD4RX LGHMVD4RX Volume 4 Circuit Protection CA E February 01 V4-T-115

116 . Series G EG-Frame Handle Mechanism Components 1 Type Color UL IP Shaft Length Inches (mm) JG-Frame Handle Mechanism Components 1 Compatible with three-pole and four-pole EG breakers only. For replacement purposes inches (609.6 mm) includes support bracket. External Handle Shaft Mechanism Black/Blue 1/1/3R 0/54/ (15.4) 68C6048G01 66A6010G D66G (304.8) 68C6048G01 66A6010G D66G (609.6) 68C6048G01 66A6010G D66G17 Red/Yellow 1/1/3R 0/54/ (15.4) 68C6048G0 66A6010G D66G (304.8) 68C6048G0 66A6010G D66G (609.6) 68C6048G0 66A6010G D66G17 Black/Blue 4/4X (15.4) 68C6048G03 66A6010G D66G (304.8) 68C6048G03 66A6010G D66G (609.6) 68C6048G03 66A6010G D66G17 Red/Yellow 4/4X (15.4) 68C6048G04 66A6010G D66G (304.8) 68C6048G04 66A6010G D66G17 Type Color UL IP 4.00 (609.6) 68C6048G04 66A6010G D66G17 Shaft Length Inches (mm) External Handle Shaft Mechanism Black/Blue 1/1/3R 0/54/ (15.4) 68C6048G01 66A6010G95 69D600G (304.8) 68C6048G01 66A6010G96 69D600G (609.6) 68C6048G01 66A6010G D600G17 Red/Yellow 1/1/3R 0/54/ (15.4) 68C6048G0 66A6010G95 69D600G (304.8) 68C6048G0 66A6010G96 69D600G (609.6) 68C6048G0 66A6010G D600G17 Black/Blue 4/4X (15.4) 68C6048G03 66A6010G95 69D600G (304.8) 68C6048G03 66A6010G96 69D600G (609.6) 68C6048G03 66A6010G D600G17 Red/Yellow 4/4X (15.4) 68C6048G04 66A6010G95 69D600G (304.8) 68C6048G04 66A6010G96 69D600G (609.6) 68C6048G04 66A6010G D600G17 V4-T-116 Volume 4 Circuit Protection CA E February 01

117 Series G. LG-Frame Handle Mechanism Components 1 Type Color UL IP Shaft Length Inches (mm) NG-Frame Handle Mechanism Components 1 1 For replacement purposes inches (609.6 mm) includes support bracket. External Handle Shaft Mechanism Black/Blue 1/1/3R 0/54/ (15.4) 68C6048G01 66A6010G95 69D6051G (304.8) 68C6048G01 66A6010G96 69D6051G (609.6) 68C6048G01 66A6010G99 69D6051G30 Red/Yellow 1/1/3R 0/54/ (15.4) 68C6048G0 66A6010G95 69D6051G (304.8) 68C6048G0 66A6010G96 69D6051G (609.6) 68C6048G0 66A6010G99 69D6051G30 Black/Blue 4/4X (15.4) 68C6048G03 66A6010G95 69D6051G (304.8) 68C6048G03 66A6010G96 69D6051G (609.6) 68C6048G03 66A6010G99 69D6051G30 Red/Yellow 4/4X (15.4) 68C6048G04 66A6010G95 69D6051G (304.8) 68C6048G04 66A6010G96 69D6051G30 Type Color UL IP 4.00 (609.6) 68C6048G04 66A6010G99 69D6051G30 Shaft Length Inches (mm) External Handle Shaft Mechanism Black/Blue 1/1/3R 0/54/ (03.) 68C6048G05 66A6013H01 69D9101G30 Red/Yellow 1/1/3R 0/54/ (03.) 68C6048G06 66A6013H01 69D9101G30 Black/Blue 4/4X (03.) 68C6048G07 66A6013H01 69D9101G30 Red/Yellow 4/4X (03.) 68C6048G08 66A6013H01 69D9101G30 Volume 4 Circuit Protection CA E February 01 V4-T-117

118 . Series G Handle Mechanisms Universal Rotary Product Description Eaton s Universal Rotary is suitable for use with Type 1 or 1 enclosure types. All rotary handle mechanisms include a handle lock off to prevent turning the breaker ON while in the OFF position, and indicate ON/OFF/Tripped/ Reset positions. The Universal Rotary has the added feature of international markings for ON (I) and OFF (O). The Universal Rotary is made of molded material. The Universal Rotary mechanisms for EG-, JG- and LG-Frame MCCBs can be operated by hand with the door open or locked off to prevent operation with the door open. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Flex Shaft V4-T-111 High Performance Rotary Handle Mechanisms... V4-T-114 Universal Rotary V4-T-118 Product Selection V4-T-119 Direct (Close-Coupled) Handle Mechanisms..... V4-T-10 V4-T-118 Volume 4 Circuit Protection CA E February 01

119 Series G. Product Selection Universal Rotary Universal Rotary Through-the-Door Handle Mechanisms Handle Color UL Shaft Length in Inches (mm) Complete 1 EG-Frame Black 1, (15.4) EHMVD06B 1.00 (304.8) EHMVD1B 4.00 (609.6) EHMVD4B Red 1, (15.4) EHMVD06R 1.00 (304.8) EHMVD1R 4.00 (609.6) EHMVD4R JG-Frame Black 1, (15.4) FJHMVD06B 1.00 (304.8) FJHMVD1B 4.00 (609.6) FJHMVD4B Red 1, (15.4) FJHMVD06R 1.00 (304.8) FJHMVD1R 4.00 (609.6) FJHMVD4R LG-Frame Black 1, (15.4) KLHMVD06B 1.00 (304.8) KLHMVD1B 4.00 (609.6) KLHMVD4B Red 1, (15.4) KLHMVD06R 1.00 (304.8) KLHMVD1R 4.00 (609.6) KLHMVD4R NG-Frame Black (15.4) HMVD5B 6.00 (15.4) HMVD5BT RG-Frame Black (8.6) HMVD6B 1 Complete catalog number includes handle, mechanism, shaft and mounting hardware. Same as HMVD5B, except uses T handle. Volume 4 Circuit Protection CA E February 01 V4-T-119

120 . Series G Handle Mechanisms Direct (Close-Coupled) Handle Mechanisms Product Description Direct (close-coupled) handle mechanisms mount directly to the circuit breaker. They are used in shallow enclosures where the standard variable depth Through-the-door type mechanism is not practical or cannot be used. Product Selection Universal Direct (EG LG) The Universal Direct handle mechanisms are rated Type 1 and Type 1. The Universal Direct handle mechanism is available as standard with a door interlock to prevent opening the enclosure while the circuit breaker is in the ON position. It is also available without a door interlock. Contents Description Page EG-Frame (15 15 Amperes) V4-T-15 JG-Frame (63 50 Amperes) V4-T-9 LG-Frame ( Amperes) V4-T-45 NG-Frame ( Amperes) V4-T-61 RG-Frame ( Amperes) V4-T-70 Motor Circuit Protectors (MCP) V4-T-8 Motor Protector Circuit Breakers (MPCB) V4-T ma Ground Fault (Earth Leakage) Modules... V4-T-89 Current Limiting Circuit Breaker Modules V4-T-93 High Instantaneous Circuit Breaker for Selective Coordination V4-T-96 Special Features and Accessories V4-T-99 Motor Operators V4-T-106 Plug-In Blocks V4-T-108 Drawout Cassette V4-T-109 Handle Mechanisms V4-T-110 Flex Shaft V4-T-111 High Performance Rotary Handle Mechanisms... V4-T-114 Universal Rotary V4-T-118 Direct (Close-Coupled) Handle Mechanisms..... V4-T-10 Application Description Direct (close-coupled) handle mechanisms are typically used for applications where high volume, standardized enclosures are being fabricated. Standards and Certifications The Universal Direct handle mechanism is UL listed, IEC / compliant and meets CSA requirements. Universal Direct Handle Mechanisms Black Handle Color Red Handle Color With Interlock Without Interlock With Interlock Without Interlock Frame EG EHMCCBI EHMCCB EHMCCRI EHMCCR JG JHMCCBI JHMCCB JHMCCRI JHMCCR LG LHMCCBI LHMCCB LHMCCRI LHMCCR V4-T-10 Volume 4 Circuit Protection CA E February 01

121 .3 Molded Case Circuit Breaker Product Family Product Overview Eaton s molded case circuit breakers are designed to provide circuit protection for low voltage distribution systems. They are described by NEMA as,... a device for closing and interrupting a circuit between separable contacts under both normal and abnormal conditions, and furthermore as,... a breaker assembled as an integral unit in a supporting and enclosing housing of insulating material. The National Electrical Code (NEC ) describes them as, A device designed to open and close a circuit by nonautomatic means, and to open the circuit automatically on a predetermined overload of current, without injury to itself when properly applied within its rating. So designed, Eaton circuit breakers protect conductors against overloads and conductors and connected apparatus, such as motors and motor starters, against short circuits. In low voltage distribution systems, there are many varied applications of molded case circuit breakers. Eaton offers the most comprehensive family of molded case circuit breakers in the industry. This section of circuit breakers includes: Thermal-magnetic trip breakers Electronic rms trip breakers Molded case switches Motor circuit protectors Current limiting breakers Special application breakers Modified Breakers Eaton breakers can be ordered with internal accessories installed. These modified breakers will be subject to an addition charge. Special Calibration Special non-ul-listed calibrations are available for certain ambient temperatures other than 40 C and for frequencies other than 50/60 Hz or DC. Reduced interrupting ratings will apply for 400 Hz applications. Contents Description Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Learn Online Drawings Online 50 C Calibration Add suffix V to catalog for complete breaker, listed above, when ordering listed ampere ratings for breakers to be used in 50 C ambients. (No price adder.) (No UL label.) Moisture-Fungus Treatment All circuit breaker cases are molded from glass-polyester which does not support the growth of fungus. Any parts which are susceptible to the growth of fungus will require special treatment. Freeze-Tested Circuit Breakers The circuit breakers may be ordered with freeze testing. This option uses special lubrication and mechanical operation is verified at 40 C. Marine Applications E- to R-Framed circuit breakers can be supplied to meet the following marine specifications: U.S. Coast Guard CFR 46; ABS American Bureau of Shipping; IEEE 45; DNV; Lloyds; and ABS/NVR These specifications generally require molded case circuit breakers to be Page V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 supplied with 50 C ambient, and plug-in adapter kits. When plug-in adapter kits are used, no terminals need be supplied (switchboard applications). Circuit breakers can also be supplied to meet UL 489 Supplement SA (Marine use) and UL 489 Supplement SB (Naval Use). UL 489 Supplement SA applies to vessels over 65 feet (19.8 m) in length. Requirements include 40 C ambient calibration, special labeling, and no use of aluminum conductors or terminals. (No 50 C.) Suffix H08 Or you can choose to add 50 C ambient but then there is no UL mark. Suffix VH08 UL 489 Supplement SB requires partial 50 C ambient calibration, vibration testing, special nameplating and no use of aluminum conductors or terminals. Eaton chooses to always fully calibrate to 50 C ambient. ( Naval labeled per UL, and UL now allows 50 C label here.) Suffix VH09 Volume 4 Circuit Protection CA E February 01 V4-T-11

122 .3 Certified Test Reports Eaton breakers can be ordered with certified test reports at the time of order entry. Test report documents the thermal and magnetic or electronic tripping characteristics of the individual breaker. Breaker and test report must be ordered together. Add suffix 1 to breaker catalog number and enter separate line item on order for certified test report. Standards and Certifications Molded case circuit breakers are designed to conform with the following standards: Underwriters Laboratories Inc., Standard UL 489, molded case circuit breakers and circuit breaker enclosures National Electrical Manufacturers Association (NEMA) Standards Publication No. AB1-1993, molded case circuit breakers Australian Standard AS 184, molded case circuit breakers British Standards Institution Standard BS 475: Part 1, switchgear and control gear Part 1: circuit breakers Canadian Standards Association (CSA) Standard C. No. 5, service entrance and branch circuit breakers International Electrotechnical Commission Recommendations IEC , circuit breakers Japanese T-Mark Standard molded case circuit breakers South African Bureau of Standards, Standard SABS 156, Standard Specification for molded case circuit breakers Swiss Electro-Technical Association Standard SEV 157-1, safety regulations for circuit breakers Union Technique de l Electricite Standard NF C 63-10, low voltage switchgear and control gear circuit breaker requirements Verband Deutscher Elektrotechniker (Association of German Electrical Engineers) Standard VDE 0660, low voltage switchgear and control gear, circuit breakers Conformance with these standards satisfies most local and international codes, assuming user acceptability and simplified application. Molded case circuit breakers equal or exceed Federal Specification Classification W-C-375b requirements for the particular class associated with the circuit breaker frame being considered. Open breakers do not have service entrance ratings. Service entrance rating is part of the enclosure. V4-T-1 Volume 4 Circuit Protection CA E February 01

123 .3 Quick Reference Industrial Circuit Breakers G-Frame Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts Type of Trip 1 1 N.I.T.U. is non-interchangeable trip unit and I.T.U. is interchangeable trip unit. Two-pole circuit breaker, or two poles of three-pole circuit breaker at 50 Vdc. AC DC Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page GHB N.I.T.U. 11a V4-T-13 GHB , /50 N.I.T.U. 11a10b, 11b V4-T-13 GHB N.I.T.U. 1b, 14b V4-T-13 GHB , 3 480Y/77 15/50 N.I.T.U. 15b V4-T-13 HGHB N.I.T.U. 1c, 13a, 13b V4-T-13 GHQ N.I.T.U V4-T-13 GHBS , 480Y/ V4-T1-34 GBHS , 600Y/347 N.I.T.U. 10 V4-T1-34 GDB /50 N.I.T.U V4-T-130 GDB N.I.T.U V4-T-130 GD /50 N.I.T.U. 13b V4-T-19 GD N.I.T.U. 13b V4-T-19 GHC N.I.T.U. 1c, 13a V4-T-137 GHC , /50 N.I.T.U. 13b 65 1 V4-T-137 GHC N.I.T.U. 1c, 13a V4-T-137 GHC , 3 480Y/77 15/50 N.I.T.U. 13b V4-T-137 HGHC N.I.T.U V4-T-137 Volume 4 Circuit Protection CA E February 01 V4-T-13

124 .3 F-Frame Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts Type of Trip 1 1 N.I.T.U. is non-interchangeable trip unit and I.T.U. is interchangeable trip unit. Two-pole circuit breaker, or two poles of three-pole circuit breaker at 50 Vdc. 3 Not defined in W-C-375b. 4 Current limiting. 5 Check with Eaton for availability. AC DC Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page EDB 100 5, N.I.T.U. 10 V4-T-141 EDS 100 5, N.I.T.U V4-T-141 ED 15 5, N.I.T.U. 1b V4-T-141 EDH 100 5, N.I.T.U. 14b V4-T-141 EDC 100 5, N.I.T.U V4-T-141 EHD N.I.T.U. 13a V4-T-141 EHD , N.I.T.U. 13b V4-T-141 FDB , N.I.T.U. 18a V4-T-141 FDB N.I.T.U V4-T-141 FD N.I.T.U. 13a V4-T-141 FD 15 5, N.I.T. a V4-T-141 FD V4-T-141 FDE N.I.T V4-T-141 HFD N.I.T.U. 13a V4-T-141 HFD 15 5, a V4-T-141 HFD V4-T-141 HFDE N.I.T V4-T-141 FDC , N.I.T.U. 4a V4-T-141 FDC V4-T-141 FDCE N.I.T V4-T-141 V4-T-14 Volume 4 Circuit Protection CA E February 01

125 .3 J-Frame Circuit Breaker Type K-Frame L-Frame 1 N.I.T.U. is non-interchangeable trip unit and I.T.U. is interchangeable trip unit. Two-pole circuit breaker, or two poles of three-pole circuit breaker at 50 Vdc. 3 Current limiting. Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page JDB 70 50, N.I.T.U. a V4-T-161 JD 70 50, 3, I.T.U. a V4-T-160 HJD 70 50, 3, I.T.U. a V4-T-160 JDC , 3, I.T.U. a V4-T-160 Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page DK , N.I.T.U. 14b V4-T-174 KDB , N.I.T.U. 3a V4-T-174 KD , 3, I.T.U. 3a V4-T-168, V4-T-170, V4-T-177, V4-T-180 CKD , 3, I.T.U. 3a V4-T-176, V4-T-183, V4-T-185 HKD , 3, I.T.U. 3a V4-T-168, V4-T-170, V4-T-177, V4-T-180 CHKD , 3, I.T.U. 3a V4-T-176, V4-T-183, V4-T-185 KDC , 3, I.T.U. 3a V4-T-168, V4-T-170, V4-T-177, V4-T-180 Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page LDB , N.I.T.U. 3a V4-T-199 LD , 3, I.T.U. 3a V4-T-195, V4-T-196, V4-T-03 CLD , 3, I.T.U. 3a V4-T-198, V4-T-09 HLD , 3, I.T.U. 3a V4-T-195, V4-T-196, V4-T-03 CHLD , 3, I.T.U. 3a V4-T-198, V4-T-09 LDC , 3, I.T.U. 3a V4-T-195, V4-T-196, V4-T-05 CLDC , 3, I.T.U. 3a V4-T-198, V4-T-11 Volume 4 Circuit Protection CA E February 01 V4-T-15

126 .3 M-Frame Circuit Breaker Type N-Frame R-Frame 1 N.I.T.U. is non-interchangeable trip unit and I.T.U. is interchangeable trip unit. Two-pole circuit breaker, or two poles of three-pole circuit breaker at 50 Vdc. 3 Current limiting. Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page MDL , I.T.U. 3a V4-T-1, V4-T-3 CMDL , I.T.U. 3a V4-T-4 HMDL , I.T.U. 3a V4-T-1, V4-T-3 CHMDL , I.T.U. 3a V4-T-4 Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page ND , N.I.T.U. 3a V4-T-3, V4-T-45 CND , N.I.T.U. 3a V4-T-39, V4-T-48 HND , N.I.T.U. 3a V4-T-34, V4-T-45 CHND , N.I.T.U. 3a V4-T-41, V4-T-48 NDC , N.I.T.U. 3a V4-T-36, V4-T-45 CNDC , N.I.T.U. 3a V4-T-43, V4-T-48 NDU N.I.T Circuit Breaker Type Continuous Ampere at 40 C No. of Poles Volts AC DC Type of Trip 1 Federal Specification W-C-375b UL Listed Interrupting s (rms Symmetrical Amperes) AC (ka) DC (ka) 10 10/ Page RD , N.I.T.U. 4a V4-T-60 CRD N.I.T.U. 4a V4-T-64 RD , N.I.T.U. 4a V4-T-60 RD , N.I.T.U. 4a V4-T-60 CRD N.I.T.U. 4a V4-T-64 RDC , N.I.T.U. 5a V4-T-60 CRDC N.I.T.U. 5a V4-T-64 RDC , N.I.T.U. 5a V4-T-6 RDC , N.I.T.U. 5a V4-T-6 CRDC N.I.T.U. 5a V4-T-64 V4-T-16 Volume 4 Circuit Protection CA E February 01

127 .3 Molded Case Circuit Breaker Product Family Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) Selection Technical Data and Specifications F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-18 V4-T-18 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 G-Frame ( Amperes) Product Description All two- and three-pole circuit breakers are of the common trip type. On all three-phase delta (40V) Grounded B phase applications, refer to Eaton Single-pole circuit breakers, 15 and 0 amperes. Switching duty rated (SWD) for fluorescent lighting applications All G-Frame circuit breakers are suitable for reverse feed use HACR rated Volume 4 Circuit Protection CA E February 01 V4-T-17

128 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame GD GDB GHB GHC GHQ Circuit Breaker Type HGHB HGHC GHBGFEP GHCGFEP Technical Data and Specifications of Poles 1 = 1 pole = poles 3 = 3 poles UL 489 Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Volts AC (50/60 Hz) Volts DC Breaker Type of Poles Y/ GDB, GD GD GHQ GHB GHB, HGHB GHC GHC, HGHC Terminal Types For line and load-side. Terminals are UL listed as suitable for wire type and size given below Terminal Types Circuit Breaker Amperes Terminal Type Material Screw Head Type Wire Type AWG Wire Range Metric Wire Range (mm ) 4 Standard 15 0 Clamp (plated steel) Slotted Cu/Al Pressure (aluminum body) Slotted Cu/Al 10 1/ Optional GD Only Pressure (steel body) Slotted Cu HID suffix only applies to the GHB and GHC single-pole, 15 0A circuit breakers. Time constant is 8 milliseconds minimum. 3 Two poles of three-pole circuit breaker. 4 Not UL listed sizes. GD K Trip Amperes K = Molded case switch D = Ring type terminals C = Steel collars V = 1 F (50 C) Suffix J01 = Fungus proofed R01 = Shock tested F01 = Freeze tester HID = High intensity discharge 1 V4-T-18 Volume 4 Circuit Protection CA E February 01

129 .3 Typical G-Frame Circuit Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Type GD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units ( Amperes) Product Description Standards and Certifications Cable in, cable out Includes mounting hardware and BMHE Product Selection UL/CSA Type GD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 480 Vac Maximum, 50 Vdc Includes Binding 14 kaic at 480 Vac kaic at 480 Vac Head Screws and Clamps Includes Line and Load Terminals 10 3 x 0.31 Maximum Continuous Two-Pole Three-Pole Three-Pole Ampere at 40 C 15 GD015 GD3015 GD3015D 0 GD00 GD300 GD300D 5 GD05 GD305 GD305D 30 GD030 GD3030 GD3030D 35 GD035 GD3035 GD3035D 40 GD040 GD3040 GD3040D 45 GD045 GD3045 GD3045D 50 GD050 GD3050 GD3050D 60 GD3060 GD3060D 70 GD3070 GD3070D 80 GD3080 GD3080D 90 GD3090 GD3090D 100 GD3100 GD3100D Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 Volume 4 Circuit Protection CA E February 01 V4-T-19

130 .3 Type GDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 480 Vac Maximum, 50 Vdc 14 kaic at 480 Vac Includes Line and Load Terminals Maximum Continuous Two-Pole Three-Pole Ampere at 40 C 15 GDB015 GDB GDB00 GDB300 5 GDB05 GDB GDB030 GDB GDB035 GDB GDB040 GDB GDB045 GDB GDB050 GDB GDB GDB GDB GDB GDB3100 Type GD Molded Case Switches Type GD Molded Case Switches Three-Pole 480 Vac Maximum, 50 Vdc Maximum Continuous Ampere at 40 C 60 GD3060K 60 GD3060KC GD3100K 100 GD3100KD 1 Includes line and load steel terminals. Includes binding head screws and clamps 10 3 x Molded case switches may open above 1300 amperes. (Includes Line and Load Terminals) V4-T-130 Volume 4 Circuit Protection CA E February 01

131 .3 Dimensions Approximate Dimensions in Inches (mm) GD-Frame, Three-Pole Front View Off 3.00 (76.) Side View.63 (66.7) 4.88 (13.8) Volume 4 Circuit Protection CA E February 01 V4-T-131

132 .3 Typical GHB Contents Types GHB and HGHB Bolt-On Panelboard Circuit Breakers ( Amperes) Standards and Certifications These breakers meet the requirements of Federal Specification W-C-375b as follows: Type GHB, 10 and 40V: Single-pole: Class 11a Two-, three-pole: Classes 10b, 11b, 1b, 14b, 15b UL/CSA Type GHB, 77 and 480Y/77V: Single-pole: Classes 1c, 13a Two-, three-pole: Class 13b Type HGHB 77V Type GHQ 77V Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 V4-T-13 Volume 4 Circuit Protection CA E February 01

133 .3 Product Selection Typical GHB Type GHB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 1 Continuous Ampere at 40 C 77/480 Vac Maximum, 77/480 Vac Maximum, 15 Vdc Maximum 15/50 Vdc Maximum Single-Pole Two-Pole Three-Pole 77/480 Vac Maximum, 15/50 Vdc Maximum 3 15 GHB GHB015 4 GHB GHB GHB00 4 GHB GHB105 GHB05 GHB GHB1030 GHB030 GHB GHB1035 GHB035 GHB GHB1040 GHB040 GHB GHB1045 GHB045 GHB GHB1050 GHB050 GHB GHB1060 GHB060 GHB GHB1070 GHB070 GHB GHB1080 GHB080 GHB GHB1090 GHB090 GHB GHB1100 GHB100 GHB3100 Type HGHB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 77 Vac Maximum, 15 Vdc Maximum Continuous Ampere at 40 C Single-Pole 15 HGHB HGHB HGHB HGHB1030 Type GHQ Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 77 Vac Maximum 14 kaic, No DC (HID and SWD) Continuous Ampere at 40 C Single-Pole 15 GHQ GHQ Y/77V, circuit breakers (Type GHB) not suitable for three-phase delta (480V). 15 through 70 ampere circuit breakers only. 3 Use two outside poles. 4 Uses (4.83) 3 screw type clamp terminals. 5 Add suffix HID for High Intensity Discharge (HID) applications. 15 and 0 ampere, single-pole are SWD rated and 0 ampere, single-pole are SWD rated. 7 Includes 4A3346H01 load clip. Volume 4 Circuit Protection CA E February 01 V4-T-133

134 .3 Dimensions Approximate Dimensions in Inches (mm) GDB-Frame, Three-Pole Front View 3.00 (76.) Max. Side View.63 (66.7) 4.00 (101.6) V4-T-134 Volume 4 Circuit Protection CA E February 01

135 .3 Single-Phase (requires two poles) Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Type GHBGFEP Bolt-On Panelboard 30 ma Industrial Ground Fault Circuit Protectors ( Amperes) Product Description Standards and Certifications amperes, 77V, These circuit breakers meet 50/60 Hz the requirements of UL 489 Operational voltage and UL V to 305V Product Selection Type GHBGFEP Bolt-On Panelboard 30 ma Industrial Ground Fault Circuit Protectors with Non-Interchangeable Trip Units Continuous Ampere at 40 C 15 GHBGFEP GHBGFEP GHBGFEP GHBGFEP GHBGFEP GHBGFEP1060 Technical Data and Specifications Single-Phase (Requires Two Poles) 77 Vac, 30 ma Interrupting Capacity s Circuit Breaker Interrupting Capacity (Symmetrical Amperes) Type of Poles 77 Vac (50/60 Hz) GHBGFEP 1 14,000 Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 Volume 4 Circuit Protection CA E February 01 V4-T-135

136 .3 Dimensions Approximate Dimensions in Inches (mm) GHB-Frame, Three-Pole Front View 3.00 (76.) Side View.63 (66.7) 4.00 (101.6) V4-T-136 Volume 4 Circuit Protection CA E February 01

137 .3 Typical GHC Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 Types GHC and HGHC Circuit Breakers ( Amperes) Product Description Standards and Certifications These breakers meet the requirements of Federal Specification W-C-37b as follows: amperes 10, 40, 77, 480Y/77V, 50/60 Hz, 15, 15/50 Vdc One-, two- and three-pole Cable in, cable out Does not include mounting hardware Type GHC, 77 and 480Y/ 77V: Single-pole: Classes 1c, 13a Two-, three-pole: Class 13b UL/CSA Volume 4 Circuit Protection CA E February 01 V4-T-137

138 .3 Product Selection Type GHC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 77 Vac Maximum, 480Y/77 Vac Maximum, 15 Vdc Maximum 1 15/50 Vdc Maximum Continuous Ampere at 40 C Single-Pole Two-Pole Three-Pole Type HGHC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 77 Vac Maximum, 15 Vdc Maximum 1 15 through 70 ampere circuit breakers only. Use two outside poles. 3 Uses screw type clamp terminals. 4 Add suffix HID for High Intensity Discharge (HID) applications. 15 and 0 ampere, single-pole are SWD rated and 0 ampere, single-pole are SWD rated. 480Y/77 Vac Maximum, 15/50 Vdc Maximum 15 GHC GHC015 3 GHC GHC GHC00 3 GHC GHC105 GHC05 GHC GHC1030 GHC030 GHC GHC1035 GHC035 GHC GHC1040 GHC040 GHC GHC1045 GHC045 GHC GHC1050 GHC050 GHC GHC1060 GHC060 GHC GHC1070 GHC070 GHC GHC1080 GHC080 GHC GHC1090 GHC090 GHC GHC1100 GHC100 GHC3100 Continuous Ampere at 40 C Single-Pole 15 HGHC HGHC HGHC HGHC1030 V4-T-138 Volume 4 Circuit Protection CA E February 01

139 .3 Single-Phase (requires two-pole spaces) Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Type GHCGFEP Cable-In/Cable-Out 30 ma Industrial Ground Fault Circuit Protectors ( Amperes) Product Description Standards and Certifications amperes, 77V, These circuit breakers meet 50/60 Hz the requirements of UL 489 Operational voltage and UL V 305V Product Selection Type GHCGFEP 30 ma Industrial Ground Fault Circuit Protectors with Non-Interchangeable Trip Units Continuous Ampere at 40 C 15 GHCGFEP GHCGFEP GHCGFEP GHCGFEP GHCGFEP GHCGFEP1060 Technical Data and Specifications Single-Phase (Requires Two Poles) 77V, 30 ma Interrupting Capacity s Circuit Breaker Interrupting Capacity (Symmetrical Amperes) Type of Poles 77 Vac (50/60 Hz) GHCGFEP 1 14,000 Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 Volume 4 Circuit Protection CA E February 01 V4-T-139

140 .3 Special Purpose Circuit Breakers Special Purpose GHC Circuit Breakers ( Amperes) Product Selection Product Description Eaton s Type GHC circuit breakers have binding head screw-type terminals on line and load side. These circuit breakers with screw-type terminals ( ) will be marked Special purpose breaker not for general use. To order this special breaker, use the catalog number from the tables on this page. Contents Type GHC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Continuous Ampere at 40 C Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Type GHB and GHC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units for HID Lighting Applications Note 1 Use two outside poles. 77 Vac Maximum, 15 Vdc Maximum 480Y/77 Vac Maximum, 15/50 Vdc Maximum Single-Pole Two-Pole Three-Pole Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T Y/77 Vac Maximum, 15/50 Vdc Maximum 1 5 GHC105D GHC05D GHC305D 30 GHC1030D GHC030D GHC3030D 35 GHC1035D GHC035D GHC3035D 40 GHC1040D GHC040D GHC3040D 45 GHC1045D GHC045D GHC3045D 50 GHC1050D GHC050D GHC3050D 60 GHC1060D GHC060D GHC3060D 70 GHC1070D GHC070D GHC3070D 80 GHC1080D GHC080D GHC3080D 90 GHC1090D GHC090D GHC3090D 100 GHC1100D GHC100D GHC3100D Type Continuous Ampere at 40 C 77 Vac Maximum Single-Pole Cable-in 15 GHC1015HID 0 GHC100HID Bolt-on 15 GHB1015HID 0 GHB100HID V4-T-140 Volume 4 Circuit Protection CA E February 01

141 .3 Typical F-Frame Breaker F-Frame Breaker with Electronic Trip Unit Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-14 V4-T-143 V4-T-154 V4-T-155 V4-T-157 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 F-Frame (10 5 Amperes) Product Description All Eaton s F-Frame circuit breakers are HACR rated All circuit breakers 10 through 30 amperes are suitable for HID (high intensity discharge) use All F-Frame circuit breakers are suitable for reverse feed use Volume 4 Circuit Protection CA E February 01 V4-T-141

142 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker Type EHD FDB FD HFD FDC Circuit Breaker Type FDE HFDE FDCE of Poles 1 = 1 pole = poles 3 = 3 poles 4 = 4 poles of Poles 3 = 3 poles Trip Amperes (FD, HFD, FDC, two-, three-, four-pole only) 00 (FD, HFD, FDC, two-, three-, four-pole only) 5 (FD, HFD, FDC, two-, three-, four-pole only) Circuit Breaker Type EDB EDS ED EDH EDC Trip Amperes FDC L EDC 3 00 L of Poles = poles 3 = 3 poles FDE Trip Unit 33 = LS 3 = LSI 35 = LSG 36 = LSIG Trip Amperes W Suffix ZG= Zone selective interlocking Suffix E = 100% protected (four-pole only) neutral pole EH = 50% protected (four-pole only) K = High magnetic molded case switch L = Line and load terminals S = Stainless steel terminals V = 50 C calibration W = Without terminals Y = Line terminals only Z = Aluminum terminals (ð100 amperes) Suffix L = Line and load terminals W = Without terminals Y = Line terminals only Z = Aluminum terminals (100 amperes) Suffix W = Without terminals L = Line and load terminals = Load side terminals only V4-T-14 Volume 4 Circuit Protection CA E February 01

143 .3 Product Selection Type ED Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for Reverse Feed 40 Vac Maximum, 15 Vdc (Includes Terminals on Load End Only) 65 kaic at 40 Vac Two-Pole Three-Pole Maximum Continuous Ampere at 40 C 15 ED015 ED ED00 ED300 5 ED05 ED ED030 ED ED035 ED ED040 ED ED050 ED ED060 ED ED100 ED ED15 ED ED150 ED ED175 ED ED00 ED300 5 ED5 ED35 Type EDH Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for Reverse Feed 40 Vac Maximum, 15 Vdc (Includes Terminals on Load End Only) 100 kaic at 40 Vac Two-Pole Three-Pole Maximum Continuous Ampere at 40 C EDH100 EDH EDH15 EDH EDH150 EDH EDH175 EDH EDH00 EDH300 5 EDH5 EDH35 Volume 4 Circuit Protection CA E February 01 V4-T-143

144 .3 Type EDC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for Reverse Feed 40 Vac Maximum, 15 Vdc (Includes Terminals on Load End Only) 00 kaic at 40 Vac Two-Pole Three-Pole Maximum Continuous Ampere at 40 C EDC100 EDC EDC15 EDC EDC150 EDC EDC175 EDC EDC00 EDC300 5 EDC5 EDC35 Type EDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for Reverse Feed 40 Vac Maximum, 15 Vdc (Includes Terminals on Load End Only) kaic at 40 Vac Two-Pole Three-Pole Maximum Continuous Ampere at 40 C 100 EDB100 EDB EDB110 EDB EDB15 EDB EDB150 EDB EDB175 EDB EDB00 EDB300 5 EDB5 EDB35 V4-T-144 Volume 4 Circuit Protection CA E February 01

145 .3 Type EDS Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for Reverse Feed 40 Vac Maximum, 15 Vdc (Includes Terminals on Load End Only) 4 kaic at 40 Vac Two-Pole Three-Pole Maximum Continuous Ampere at 40 C Type EHD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units (Includes Terminals on Load End Only) 77 Vac Maximum, 15 Vdc 480 Vac Maximum, 50 Vdc 14 kaic at 77 Vac 14 kaic at 480 Vac Single-Pole Two-Pole Three-Pole 1 Not UL listed. 5 kaic interrupting rating. UL listed for SWD applications, see NEC Article 40.83(d). 100 EDS100 EDS EDS110 EDS EDS15 EDS EDS150 EDS EDS175 EDS EDS00 EDS300 5 EDS5 EDS35 Maximum Continuous Ampere at 40 C 10 1 EHD1010 EHD010 EHD EHD1015 EHD015 EHD EHD100 EHD00 EHD300 5 EHD105 EHD05 EHD EHD1030 EHD030 EHD EHD1035 EHD035 EHD EHD1040 EHD040 EHD EHD1045 EHD045 EHD EHD1050 EHD050 EHD EHD1060 EHD060 EHD EHD1070 EHD070 EHD EHD1080 EHD080 EHD EHD1090 EHD090 EHD EHD1100 EHD100 EHD3100 Volume 4 Circuit Protection CA E February 01 V4-T-145

146 .3 Type FDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units (Includes Terminals on Load End Only) 600 Vac Maximum, 50 Vdc 14 kaic at 600 Vac Two-Pole Three-Pole Four-Pole Maximum Continuous Ampere at 40 C 1 Not UL listed. 5 kaic interrupting rating. UL listed for SWD applications, see NEC Article 40.83(d) FDB010 FDB3010 FDB FDB015 FDB3015 FDB FDB00 FDB300 FDB400 5 FDB05 FDB305 FDB FDB030 FDB3030 FDB FDB035 FDB3035 FDB FDB040 FDB3040 FDB FDB045 FDB3045 FDB FDB050 FDB3050 FDB FDB060 FDB3060 FDB FDB070 FDB3070 FDB FDB080 FDB3080 FDB FDB090 FDB3090 FDB FDB100 FDB3100 FDB FDB110 FDB3110 FDB FDB15 FDB315 FDB FDB150 FDB3150 FDB4150 V4-T-146 Volume 4 Circuit Protection CA E February 01

147 .3 Type FD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units (Includes Terminals on Load End Only) 77 Vac Maximum, 15 Vdc 600 Vac Maximum, 50 Vdc 35 kaic at 77 Vac 35 kaic at 480 Vac Single-Pole Two-Pole Three-Pole Four-Pole Maximum Continuous Ampere at 40 C 1 Not UL listed. 5 kaic interrupting rating. UL listed for SWD applications, see NEC Article 40.83(d) FD FD1015 FD015 FD3015 FD FD100 FD00 FD300 FD400 5 FD105 FD05 FD305 FD FD1030 FD030 FD3030 FD FD1035 FD035 FD3035 FD FD1040 FD040 FD3040 FD FD1045 FD045 FD3045 FD FD1050 FD050 FD3050 FD FD1060 FD060 FD3060 FD FD1070 FD070 FD3070 FD FD1080 FD080 FD3080 FD FD1090 FD090 FD3090 FD FD1100 FD100 FD3100 FD FD1110 FD110 FD3110 FD FD115 FD15 FD315 FD FD1150 FD150 FD3150 FD FD175 FD3175 FD FD00 FD300 FD400 5 FD5 FD35 FD45 Volume 4 Circuit Protection CA E February 01 V4-T-147

148 .3 Type HFD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units (Includes Terminals on Load End Only) 77 Vac Maximum, 15 Vdc 600 Vac Maximum, 50 Vdc 65 kaic at 77 Vac 65 kaic at 480 Vac Single-Pole Two-Pole Three-Pole Four-Pole Maximum Continuous Ampere at 40 C Note 1 UL listed for SWD applications, see NEC Article 40.83(d). 15 HFD HFD015 HFD3015 HFD HFD100 1 HFD00 HFD300 HFD400 5 HFD105 HFD05 HFD305 HFD HFD1030 HFD030 HFD3030 HFD HFD1035 HFD035 HFD3035 HFD HFD1040 HFD040 HFD3040 HFD HFD1045 HFD045 HFD3045 HFD HFD1050 HFD050 HFD3050 HFD HFD1060 HFD060 HFD3060 HFD HFD1070 HFD070 HFD3070 HFD HFD1080 HFD080 HFD3080 HFD HFD1090 HFD090 HFD3090 HFD HFD1100 HFD100 HFD3100 HFD HFD1110 HFD110 HFD3110 HFD HFD115 HFD15 HFD315 HFD HFD1150 HFD150 HFD3150 HFD HFD175 HFD3175 HFD HFD00 HFD300 HFD400 5 HFD5 HFD35 HFD45 V4-T-148 Volume 4 Circuit Protection CA E February 01

149 .3 Type FDC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units (Includes Terminals on Load End Only) 600 Vac Maximum, 50 Vdc 100 kaic at 480 Vac Two-Pole Three-Pole Four-Pole Maximum Continuous Ampere at 40 C 15 FDC015 FDC3015 FDC FDC00 FDC300 FDC400 5 FDC05 FDC305 FDC FDC030 FDC3030 FDC FDC035 FDC3035 FDC FDC040 FDC3040 FDC FDC045 FDC3045 FDC FDC050 FDC3050 FDC FDC060 FDC3060 FDC FDC070 FDC3070 FDC FDC080 FDC3080 FDC FDC090 FDC3090 FDC FDC100 FDC3100 FDC FDC110 FDC3110 FDC FDC15 FDC315 FDC FDC15 FDC3150 FDC FDC175 FDC3175 FDC FDC00 FDC300 FDC400 5 FDC5 FDC35 FDC45 Volume 4 Circuit Protection CA E February 01 V4-T-149

150 .3 Types FDE, HFDE and FDCE Electronic Circuit Breakers with Non-Interchangeable Trip Units Maximum Neutral LS LSI LSG LSIG Ampere CT for LSG and LSIG IC 35 kaic at 480 Vac 80 CTF080 FDE FDE30803 FDE FDE CTF160 FDE FDE31603 FDE FDE CTF5 FDE3533 FDE353 FDE3535 FDE3536 IC 65 kaic at 480 Vac 80 CTF080 HFDE HFDE30803 HFDE HFDE CTF160 HFDE HFDE31603 HFDE HFDE CTF5 HFDE3533 HFDE353 HFDE3535 HFDE3536 IC 100 kaic at 480 Vac 1 80 CTF080 FDCE FDCE30803 FDCE FDCE CTF160 FDCE FDCE31603 FDCE FDCE CTF5 FDCE3533 FDCE353 FDCE3535 FDCE3536 FDE Electronic Breaker with Zone Selective Interlocking Ampere LSI w/zsi LSIG w/zsi 35 kaic at 480 Vac 80 FDE30803ZG FDE308036ZG 160 FDE31603ZG FDE316036ZG 5 FDE353ZG FDE3536ZG 65 kaic at 480 Vac 80 HFDE30803ZG HFDE308036ZG 160 HFDE31603ZG HFDE316036ZG 5 HFDE353ZG HFDE3536ZG Digitrip Electronic Trip Units Circuit Breaker Type Frame s FDE, HFDE, FDCE 5 100, 110, 15, 150, 160, 175, 00, 5 FDE, HFDE, FDCE , 70, 80, 90, 100, 15, 150, 160 FDE, HFDE, FDCE 80 15, 0, 30, 40, 50, 60, 70, 80 Note 1 Check with Eaton for availability. V4-T-150 Volume 4 Circuit Protection CA E February 01

151 .3 Molded Case Switches Eaton s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489. Molded Case Switches Complete Circuit Breaker with Load Side Terminals Only 480 Vac Maximum, 50 Vdc 600 Vac Maximum, 50 Vdc Maximum Continuous Ampere at 40 C Note Molded case switches will open above 1800 amperes. Two-Pole 100 EHD100K FD100K HFD100K 150 FD150K HFD150K 5 FD5K HFD5K Three-Pole 100 EHD3100K FD3100K HFD3100K 150 FD3150K HFD3150K 5 FD35K HFD35K Four-Pole 100 FD4100K HFD4100K 150 FD4150K HFD4150K 5 FD45K HFD45K Volume 4 Circuit Protection CA E February 01 V4-T-151

152 .3 Accessories Selection Guide and Ordering Information Breaker Mount Ammeter 1 Description Breaker mount ammeter Line and Load Terminals Line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. Except as noted, terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B. Unless otherwise specified, F-Frame circuit breakers are factory equipped with load terminals only. Line and Load Terminals Maximum Breaker Amperes Terminal Body Material DIGIVIEW Ordering Information F-Frame circuit breakers and molded case switches have load terminals only as standard equipment. When standard line-end terminals (same as standard load-end terminals) are required, add Suffix L to the circuit breaker catalog number. When nonstandard or optional line and/ or load terminals are required, order by style number. Specify if factory installation is required. Wire Type AWG Wire Range Metric Wire Range mm Package of Three Terminals Standard Pressure Type Terminals 0 (EHD) Steel Cu/AI T0FB 100 Steel Cu/AI 14 1/ T100FB 5 Aluminum Cu/AI 4 4/ TA5FD Optional Pressure Terminals 50 Aluminum Cu/AI TA50FB 100 Aluminum Cu/AI 14 1/ TA100FD 00 Stainless steel Cu 4 4/ T150FB 5 Copper Cu 4 4/ T5FD 5 Aluminum Cu/AI kcmil TA5FDK 3 1 Use on FDE, HFDE and FDCE electronic trip only. Not for use with ED, EDH, EDC breakers. 3 Includes terminal shield kit. Adds approximately 3 inches (76.) to breaker height. Available for use on three-pole breaker only. V4-T-15 Volume 4 Circuit Protection CA E February 01

153 .3 Line and Load Terminals Screw Conductor Washer Conductor Conductor Wire Clamp Screw 3T0FB 3T100FB, 3T150FB 3TA5FD Assemble wire clamp to bottom of conductor as shown. Collar Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: Collar must surround conductor. Conductor Washer Washer Screw Screw 3TA50FB 3TA100FD 3TA5FDK (Up to 150 mm ) Assemble collar on top of conductor as shown. Tighten securely with screw and washer. Collar Conductor Collar Nut Collar slides onto conductor and is held in position by a screw and lockwasher. Collar Extrusion Clip Insert collar enclosing conductor and center on extrusion on collar. Install clip with legs on top of conductor and snap end around bottom of collar. Assemble collar on top of conductor as shown. Tighten securely with screw and washer. Terminal shield must be used with this collar. Note: For 185 mm, use 3TA5FDK1. Volume 4 Circuit Protection CA E February 01 V4-T-153

154 .3 Accessories Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Allowable Accessory Combinations FD Frame Accessories Description Internal Accessories (Only one internal accessory per pole) Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Reference Page Single-Pole Two-Pole Three-Pole 1 Four-Pole Center Left Right Left Center Right Left Center Right Neutral Alarm lockout switch (make only) V4-T-98 Alarm lockout (Make/Break) V4-T-98 Alarm lockout (Make/Break) V4-T-98 Auxiliary switch (1A, 1B) V4-T-300 Auxiliary switch (A, B) V4-T-300 Auxiliary switch and alarm switch combination V4-T-30 Shunt trip standard V4-T-304 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-310 External Accessories End cap kit V4-T-331 Keeper nut V4-T-331 Control wire terminal kit V4-T-33 Multiwire connectors V4-T-333 Base mounting hardware V4-T-333 Terminal shields V4-T-335 Terminal end covers V4-T-336 Interphase barriers V4-T-336 Non-padlockable handle block V4-T-337 Snap-on padlockable handle lock hasp V4-T-337 Padlockable handle lock hasp V4-T-338 Cylinder lock V4-T-338 Key interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Walking beam interlock requires two breakers V4-T-340 Electrical (solenoid and motor) operators V4-T-341 Plug-in adapters V4-T-34 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 LFD current limiter V4-T-35 IQ Energy Sentinel V4-T-35 Cause of trip display V4-T-353 Remote mount cause of trip display V4-T-353 Cause of trip LED V4-T-353 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application Note 1 Internal accessories are listed with Underwriters Laboratories (UL) for factory installation. They are not listed with UL for field installation. V4-T-154 Volume 4 Circuit Protection CA E February 01

155 .3 Technical Data and Specifications UL 489 Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Breaker Volts AC (50/60 Hz) Volts DC 1 Type of Poles EDB, 3 10 EDS, ED, EDH, EDC, EHD , FDB, 3, FD , 3, FDE 4, 3, HFD , 3, HFDE 4, 3, FDC 5, 3, FDCE IEC (P1) Interrupting Capacity s (P1) Interrupting Capacity (ka Symmetrical Amperes) Circuit Breaker Volts AC (50/60 Hz) Volts DC 1 Type of Poles 0, , EDB, 3 10 EDS, ED, EDH, EDC, EHD , FDB, 3, FD , 3, HFD , 3, FDC, 3, Digitrip Electronic Trip Units Circuit Breaker Type Frame s FDE, HFDE, FDCE 5 100, 110, 15, 150, 160, 175, 00, 5 FDE, HFDE, FDCE , 70, 80, 90, 100, 15, 150, 160 FDE, HFDE, FDCE 80 15, 0, 30, 40, 50, 60, 70, 80 1 DC ratings apply to substantially non-inductive circuits. Two-pole circuit breaker, or two poles of three-pole circuit breaker. 3 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 4 Electronics available on three-pole only, no DC rating for FDE, HFDE, FDCE. 5 Current limiting. 6 Check with Eaton for availability. Volume 4 Circuit Protection CA E February 01 V4-T-155

156 .3 F-Frame Digitrip Specifications Trip Unit Type Digitrip RMS 310+ rms sensing Yes Breaker Type Frame FDE Ampere range 15 5A Interrupting rating at 480V 35, 65, 100 (ka) Protection Ordering options LS LSI LSG LSIG Fixed rated plug (I n ) No Overtemperature trip Yes Long Delay Protection (L) Adjustable rating plug (I n ) No Long delay pickup % frame Long delay time I t 4 seconds Long delay time I 4 t No Long delay thermal memory Yes High load alarm Yes Short Delay Protection (S) Short delay pickup % x (I r ) Short delay time I t Yes No Short delay time Flat No Inst 300 ms Short delay time Z.S.I. Yes 1 Instantaneous Protection (I) Instantaneous pickup No Discriminator No Instantaneous override Yes Ground Fault Protection (G) Ground fault alarm No Ground fault pickup 0 100% frame Ground fault delay I t No Ground fault delay flat Inst 300 ms Ground fault Z.S.I. Yes 1 Ground fault thermal memory Yes System Diagnostics Cause of trip LEDs No Magnitude of trip information No Remote signal contacts No System Monitoring Digital display No Current No Voltage No Power and energy No Power quality harmonics No Power factor No Communications PowerNet No Testing Testing method Test kit Legend I n = Plug I r = Long Delay Pickup Setting x In Note 1 ZSI (zone selective interlocking) is optional. Must order with ZSI. Standard 310+ does not come with ZSI. V4-T-156 Volume 4 Circuit Protection CA E February 01

157 .3 Dimensions and Weights Approximate Dimensions in Inches (mm) FD Frame of Poles Width Height Depth (35.1) 6.00 (15.4) 3.38 (86.0).75 (70.0) 6.00 (15.4) 3.38 (86.0) (105.0) 6.00 (15.4) 3.38 (86.0) (139.7) 6.00 (15.4) 3.38 (86.0) FD Frame, Three-Pole Approximate Shipping Weight Lbs (kg) FD Frame Breaker Type Front View On Off 4.13 (104.9) 6.00 (15.4) of Poles ED, EDB, EDS, EDH, EDC 3 (1.4) 4.5 (.0) EHD, FDB, FD, HFD, FDC (0.9) 3 (1.4) 4.5 (.0) 6 (.7) FDE, HFDE, FDCE 4.5 (.0) Side View 3.38 (85.7) Volume 4 Circuit Protection CA E February 01 V4-T-157

158 .3 Typical J-Frame Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-159 V4-T-160 V4-T-163 V4-T-164 V4-T-165 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 J-Frame (70 50 Amperes) Product Description All Eaton s J-Frame circuit breakers are HACR rated J-Frame circuit breakers are available as individual components (frame, trip unit, terminals), or factory assembled complete breakers J-Frame circuit breakers with non-interchangeable trip units are suitable for reverse feed use V4-T-158 Volume 4 Circuit Protection CA E February 01

159 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Trip Unit Circuit Breaker/ Frame Type JDB JD HJD JDC Trip Unit Type JT = Thermal-magnetic of Poles = poles 3 = 3 poles 4 = 4 poles JD 3 50 F Circuit Breaker/Frame Ampere of Poles = poles 3 = 3 poles 4 = 4 poles JT 3 50 T Trip Unit / Plug Ampere Suffix C = Non-aluminum terminals F = Frame only K = High magnetic molded case switch V = 50 C calibration W= Without terminals X = Load side terminals only Y = Line side terminals only Suffix T =Trip unit thermal-magnetic fixed thermal adj. magnetic V = 50 C calibration (thermal-magnetic trip units only) Volume 4 Circuit Protection CA E February 01 V4-T-159

160 .3 Product Selection Types JD, HJD and JDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Maximum Continuous Ampere at 40 C Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 1 Magnetic trip adjustable 5 10 times continuous ampere rating. Individually packed. 3 Fully rated neutral pole with no protection. 4 Neutral is in right pole. High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 Thermal-Magnetic Trip Unit Only 1 For Use with Standard or High or Ultra High Interrupting Frames Standard Terminals Only See Page V4-T-16 for Optional Terminals Two-Pole 70 JD070 HJD070 JDC070 JT070T TA50KB 90 JD090 HJD090 JDC090 JT090T 100 JD100 HJD100 JDC100 JT100T 15 JD15 HJD15 JDC15 JT15T 150 JD150 HJD150 JDC150 JT150T 175 JD175 HJD175 JDC175 JT175T 00 JD00 HJD00 JDC00 JT00T 5 JD5 HJD5 JDC5 JT5T 50 JD50 HJD50 JDC50 JT50T Three-Pole 70 JD3070 HJD3070 JDC3070 JT3070T TA50KB 90 JD3090 HJD3090 JDC3090 JT3090T 100 JD3100 HJD3100 JDC3100 JT3100T 15 JD315 HJD315 JDC315 JT315T 150 JD3150 HJD3150 JDC3150 JT3150T 175 JD3175 HJD3175 JDC3175 JT3175T 00 JD300 HJD300 JDC300 JT300T 5 JD35 HJD35 JDC35 JT35T 50 JD350 HJD350 JDC350 JT350T Four-Pole JD415 HJD415 JDC415 JT315T TA50KB 150 JD4150 HJD4150 JDC4150 JT3150T 175 JD4175 HJD4175 JDC4175 JT3175T 00 JD400 HJD400 JDC400 JT300T 5 JD45 HJD45 JDC45 JT35T 50 JD450 HJD450 JDC450 JT350T V4-T-160 Volume 4 Circuit Protection CA E February 01

161 .3 Types JD, HJD and JDC Thermal-Magnetic Circuit Breakers Frame Only Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Two-Pole JD50F HJD50F JDC50F Three-Pole JD350F HJD350F JDC350F Four-Pole JD450F HJD450F JDC450F Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Type JDB Thermal-Magnetic Circuit Breakers with Non- Interchangeable Thermal-Magnetic Trip Units Suitable for Reverse Feed Application 600 Vac Rated, 50 Vdc Complete Circuit Breaker Maximum Continuous Ampere at 40 C Without Line and Load Terminals Two-Pole 70 JDB070W JDB JDB090W JDB JDB100W JDB JDB15W JDB JDB150W JDB JDB175W JDB JDB00W JDB00 5 JDB5W JDB5 50 JDB50W JDB50 Three-Pole 70 JDB3070W JDB JDB3090W JDB JDB3100W JDB JDB315W JDB JDB3150W JDB JDB3175W JDB JDB300W JDB300 5 JDB35W JDB35 50 JDB350W JDB350 With Standard Line and Load Terminals Only Molded Case Switches Eaton s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker Molded Case Switches 600 Vac Maximum, 50 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker Only Without Line and Load Terminals Suitable for Reverse Feed Use 1 Individually packed. Molded case switches may open above 500 amperes. components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489. Standard Terminals Only See PageV4-T-16 for Optional Terminals Two-Pole 50 JD50KW JDB50KW TA50KB 1 HJD50KW HJDB50KW Three-Pole 50 JD350KW JDB350KW TA50KB 1 HJD350KW HJDB350KW Four-Pole 50 JD450KW JDB450KW TA50KB 1 HJD450KW HJDB450KW Volume 4 Circuit Protection CA E February 01 V4-T-161

162 .3 Accessories Selection Guide and Ordering Information Line and Load Terminals Eaton s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA Standard C. No. 65, or Electrical Bulletin Slotted Screw T50KB Terminal Line and Load Terminals Maximum Breaker Amperes Collar Terminal Body Material Nut Unless otherwise specified, J- Frame circuit breaker line and load terminals are shipped separately for field installation. The bottom of the standard TA50KB terminal contains a recess that is positioned over the J-Frame circuit breaker terminal conductor. TA50KB Terminal (Standard) Wire Type AWG Wire Range/ No. Conductors Ordering Information J-Frame circuit breakers use Cu/AI terminals as standard. When optional copper-only terminals are required, order by catalog number. Specify if factory installation is required. Metric Wire Range mm Standard Cu/AI Pressure Terminals 50 Aluminum Cu/AI kcmil TA50KB Optional Cu Pressure Terminals 50 Stainless Steel Cu kcmil T50KB Collar Slotted Screw V4-T-16 Volume 4 Circuit Protection CA E February 01

163 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. JD Frame Accessories Description Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Reference Page Two-, Three-Pole Four-Pole Left Center Right Left Center Right Neutral Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-98 Auxiliary switch (1A, 1B) V4-T-300 Auxiliary switch (A, B) V4-T-300 Auxiliary switch and alarm switch combination V4-T-30 Shunt trip standard V4-T-305 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-31 External Accessories End cap kit V4-T-331 Plug nut V4-T-33 Control wire terminal kit V4-T-33 Multiwire connectors V4-T-333 Base mounting hardware V4-T-334 Terminal shields V4-T-335 Interphase barriers V4-T-336 Non-padlockable handle block V4-T-337 Padlockable handle block V4-T-337 Padlockable handle lock hasp V4-T-338 Cylinder lock V4-T-338 Key interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Electrical (solenoid) operator V4-T-34 Plug-in adapters V4-T-34 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 Handle extension V4-T-351 IQ Energy Sentinel V4-T-35 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application Volume 4 Circuit Protection CA E February 01 V4-T-163

164 .3 Technical Data and Specifications UL 489 Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Breaker Volts AC (50/60 Hz) Volts DC Type of Poles JDB, JD, 3, HJD, 3, JDC 3, 3, IEC (P1) Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Breaker Volts AC (50/60 Hz) Volts DC Type of Poles JD, 3, HJD, 3, JDC, 3, Two-pole circuit breaker or two outside poles of three-pole circuit breaker. Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 3 Current limiting. V4-T-164 Volume 4 Circuit Protection CA E February 01

165 .3 Dimensions and Weights Approximate Dimensions in Inches (mm) JD Frame of Poles Width Height Depth, (105.0) (54.0) 4.06 (104.1) (139.7) (54.0) 4.06 (104.1) JD-Frame, Three-Pole 0.34 R (8.7 R) 3.94 (100.0) 0.7 (18.) 0.50 (1.7) Diameter 3 Megger Holes if Required 1.56 (39.7) 0.78 (19.8) Approximate Shipping Weight in Lbs (kg) JD Frame Breaker Type Front View Cutout 0.19 R (4.8) R C L Handle C L Breaker.75 (69.9) 3.50 (88.9).9 (74.) 0.88 (.) 3.33 (84.5) 1.38 (34.9) 1.75 (44.5) (54.0) Front View 4.13 (104.8) ON OFF Side View 4.06 (103.) Complete Breaker Frame Only Trip Unit Two-Pole Three-Pole Four-Pole Two-Pole Three-Pole Four-Pole Two-Pole Three-Pole Four-Pole JDB 11.5 (5.1) 1.50 (5.7) JD 11.5 (5.1) 1.50 (5.7) 13.5 (6.0) 9.00 (4.1) (4.5) (4.8).00 (0.9).00 (0.9).5 (1.0) HJD 11.5 (5.1) 1.50 (5.7) 13.5 (6.0) 9.00 (4.1) (4.5) (4.8).00 (0.9).00 (0.9).5 (1.0) JDC 1.5 (5.6) (6.1) 14.5 (6.5) (4.5) (5.0) (5.).00 (0.9).00 (0.9).5 (1.0) Volume 4 Circuit Protection CA E February 01 V4-T-165

166 .3 Typical K-Frame Circuit Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-167 V4-T-168 V4-T-188 V4-T-189 V4-T-19 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 K-Frame ( Amperes) Product Description All Eaton K-Frame Circuit Breakers are HACR rated K-Frame circuit breakers are available as individual components (frame, trip unit, terminals), or factory assembled complete breakers K-Frame circuit breakers with non-interchangeable trip units are suitable for reverse feed use V4-T-166 Volume 4 Circuit Protection CA E February 01

167 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Trip Unit OPTIM Circuit Breaker/Frame Note Trip Unit Type KT = Thermal-magnetic KES = Electronic Circuit Breaker/ Frame Type KD HKD KDC CKD CHKD Circuit Breaker/ Frame Type DK KD KDB HKD HKDB KDC CKD CHKD of Poles 3 = 3 poles 1 Ampere rating available with electronic trip unit only. of Poles = poles 3 = 3 poles 4 = 4 poles of Poles = poles 3 = 3 poles 4 = 4 poles KD F Circuit Breaker/Frame Ampere Trip Unit / Plug Ampere Circuit Breaker/Frame Ampere KT T KD 3 15 T5 7 W Suffix C = Copper terminals E = 50% protected neutral pole (four-pole electronic trip circuit breaker only) F = Frame only K = High magnetic molded case switch V = 50 C calibration (thermal-magnetic trip units only) W = Without terminals X = Load side terminals only Y = Line side terminals only No suffix number indicates standard load and line side terminals Suffix LS = Electronic trip unit adjustable short time delay with I t short delay ramp LSI = Electronic trip unit independently adjustable short time pickup and delay LSG = Electronic trip unit adjustable short time pickup with I t short delay and ground fault protection LSIG = Electronic trip unit independently adjustable short time pickup and delay and ground fault protection V = 50 C calibration (thermal-magnetic trip units only) E = 50% protected neutral pole (four-pole electronic trip unit only) terminals only T = Trip unit only Trip Model T5 = Model 550 T10 = Model 1050 Trip Type = LSI 6 = LSIG 7 = LSIA Suffix W = Without terminals Volume 4 Circuit Protection CA E February 01 V4-T-167

168 .3 Product Selection Types KD, HKD and KDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Maximum Continuous Ampere at 40 C Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals 1 1 Magnetic trip adjustable 5 10 times continuous ampere rating. Individually packed. 3 TA400K, 3TA400K and 4TA400K terminal kits contain one terminal for each pole and one terminal cover. Thermal-Magnetic Trip Unit Only 1 For Use with Standard or High or Ultra High Interrupting Frames Standard Terminals Only See Page V4-T-187 for Optional Terminals Two-Pole 100 KD100 HKD100 KDC100 KT100T TA300K 15 KD15 HKD15 KDC15 KT15T TA300K 150 KD150 HKD150 KDC150 KT150T TA300K 175 KD175 HKD175 KDC175 KT175T TA300K 00 KD00 HKD00 KDC00 KT00T TA300K 5 KD5 HKD5 KDC5 KT5T TA300K 50 KD50 HKD50 KDC50 KT50T TA350K 300 KD300 HKD300 KDC300 KT300T TA350K 350 KD350 HKD350 KDC350 KT350T TA350K 400 KD400 HKD400 KDC400 KT400T TA400K 3 Three-Pole 100 KD3100 HKD3100 KDC3100 KT3100T TA300K 15 KD315 HKD315 KDC315 KT315T TA300K 150 KD3150 HKD3150 KDC3150 KT3150T TA300K 175 KD3175 HKD3175 KDC3175 KT3175T TA300K 00 KD300 HKD300 KDC300 KT300T TA300K 5 KD35 HKD35 KDC35 KT35T TA300K 50 KD350 HKD350 KDC350 KT350T TA350K 300 KD3300 HKD3300 KDC3300 KT3300T TA350K 350 KD3350 HKD3350 KDC3350 KT3350T TA350K 400 KD3400 HKD3400 KDC3400 KT3400T 3TA400K 3 Four-Pole 100 KD4100 HKD4100 KDC4100 KT3100T TA300K 15 KD415 HKD415 KDC415 KT315T TA300K 175 KD4175 HKD4175 KDC4175 KT3175T TA300K 00 KD400 HKD400 KDC400 KT300T TA300K 5 KD45 HKD45 KDC45 KT35T TA300K 50 KD450 HKD450 KDC450 KT350T TA350K 300 KD4300 HKD4300 KDC4300 KT3300T TA350K 350 KD4350 HKD4350 KDC4350 KT3350T TA350K 400 KD4400 HKD4400 KDC4400 KT3400T 4TA400K 3 V4-T-168 Volume 4 Circuit Protection CA E February 01

169 .3 Types KD, HKD and KDC Thermal-Magnetic Circuit Breakers Frame Only Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Two-Pole KD400F HKD400F KDC400F Three-Pole KD3400F HKD3400F KDC3400F Four-Pole KD4400F HKD4400F KDC4400F Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Volume 4 Circuit Protection CA E February 01 V4-T-169

170 .3 Types KD, HKD and KDC Electronic Circuit Breakers with Interchangeable Trip Units Order as individual components: breaker frame, trip unit, rating plug, terminals. Types KD, HKD and KDC Electronic Circuit Breakers with Interchangeable Trip Units Three-Pole 1 Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only 3 Digitrip 310 Plug Only Max. Cont. Ampere at 40 C Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Standard Adjustable Short Time Pickup with I t Short Delay Ramp Options Independently Adjustable Short Time Pickup and Delay 1 Three-pole KES Trip Units are for use in three-pole frames only. Ampere rating is established by rating plug. 3 For AC use only. 4 Individually packed. 5 3TA400K and 4TA400K terminal kits contain one terminal for each pole and one terminal cover. Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plug Adjustable Plug Ampere Standard Terminals Only See Page V4-T-187 for Optional Terminals 15 KD3400F HKD3400F KDC3400F KES315LS KES315LSI KES315LSG KES315LSIG 70 1KES070T 70/90/100/15 TA300K KES090T A1KES15T1 TA300K KES100T TA300K KES110T TA300K KES15T TA300K 4 50 KD3400F HKD3400F KDC3400F KES350LS KES350LSI KES350LSG KES350LSIG 70 KES070T 15/150/00/ KES100T AKES50T1 15 KES15T TA300K KES150T TA300K KES160T TA300K KES175T TA300K 4 00 KES00T TA300K 4 5 KES5T TA300K 4 50 KES50T TA350K KD3400F HKD3400F KDC3400F KES3400LS KES3400LSI KES3400LSG KES3400LSIG 00 4KES00T 00/50/300/400 TA300K 4 5 4KES5T A4KES400T1 TA300K KES50T 00/40/60/80 TA300K KES300T A4KES00T5 TA300K KES350T 30/340/360/380 TA350K KES400T A4KES300T5 3TA400K 5 V4-T-170 Volume 4 Circuit Protection CA E February 01

171 .3 Types KD, HKD and KDC Electronic Circuit Breakers with Interchangeable Trip Units Four Pole 1 Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only 4 Digitrip 310 Plug Only Max. Cont. Ampere at 40 C 3 Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Standard Adjustable Short Time Pickup with I t Short Delay Ramp Options Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Trip unit includes protected neutral pole. Use corresponding three-pole trip unit if protected neutral pole is not required. Fully rated neutral pole protection is standard. For 50% rated protection on neutral pole, add Suffix E to four-pole trip unit catalog number. 3 Ampere rating is established by rating plug. 4 For AC use only. 5 Individually packed. 6 3TA400K and 4TA400K terminal kits contain one terminal for each pole and one terminal cover. Fixed Plug Adjustable Plug Ampere Standard Terminals Only See Page V4-T-187 for Optional Terminals 15 KD4400F HKD4400F KDC4400F KES415LS KES415LSI 70 1KES070T 70/90/100/15 TA300K KES090T A1KES15T1 TA300K KES100T TA300K KES110T TA300K KES15T TA300K 5 50 KD4400F HKD4400F KDC4400F KES450LS KES450LSI 70 KES070T 15/150/00/50 TA300K KES100T AKES50T1 TA300K 5 15 KES15T TA300K KES150T TA300K KES160T TA300K KES175T TA300K 5 00 KES00T TA300K 5 5 KES5T TA300K 5 50 KES50T TA350K KD4400F HKD4400F KDC4400F KES4400LS KES4400LSI 00 4KES00T 00/50/300/400 TA300K 5 5 4KES5T A4KES400T1 TA300K KES50T 00/40/60/80 TA350K KES300T A4KES00T5 TA350K KES350T 30/340/360/380 TA350K KES400T A4KES300T5 4TA400K 6 Volume 4 Circuit Protection CA E February 01 V4-T-171

172 .3 Types KDB and HKDB with Digitrip 310 Non-Interchangeable Trip Unit Suitable for Reverse Feed Circuit Breaker Frame Including Digitrip RMS 310 Electronic Tip Unit Less Terminals and Plug Maximum Continuous Ampere at 40ºC Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Type KDB of Poles Digitrip RMS 310 Plug (Order as Separate Items) L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Time Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) LS LSI LSG LSIG Fixed Adjustable 8 x I n 8 x I n I 300 ms 8 x I n Varies by frame ms 8 x I n ms Varies by frame ms 15 3 KDB315FT33W KDB315FT3W KDB315FT35W KDB315FT36W 1KES070T 70/90/100/15 1KES090T 1KES100T 1KES15T A1KES15T KDB350FT33W KDB350FT3W KDB350FT35W KDB350FT36W KES070T 15/150/00/50 KES090T KES100T KES15T KES150T KES160T KES175T KES00T KES5T KES50T AKES50T KDB3400FT33W KDB3400FT3W KDB3400FT35W KDB3400FT36W 4KES00T 00/50/300/400 4KES5T A4KES400T1 4KES50T 4KES300T 00/40/60/80 A4KES00T5 4KES350T 30/340/360/380 4KES400T A4KES300T5 V4-T-17 Volume 4 Circuit Protection CA E February 01

173 .3 Types KDB and HKDB with Digitrip 310 Non-Interchangeable Trip Unit Suitable for Reverse Feed, continued Maximum Continuous Ampere at 40ºC Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Type HKDB of Poles Circuit Breaker Frame Including Digitrip RMS 310 Electronic Tip Unit Less Terminals and Plug L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Time Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Digitrip RMS 310 Plug (Order as Separate Items) LS LSI LSG LSIG Fixed Adjustable x I n 8 8 x I n 8 x I n 8 x I n I 300 ms ms Varies by frame Varies by frame ms ms 15 3 HKDB315FT33W HKDB315FT3W HKDB315FT35W HKDB315FT36W 1KES070T 70/90/100/15 1KES090T 1KES100T 1KES15T A1KES15T HKDB350FT33W HKDB350FT3W HKDB350FT35W HKDB350FT36W KES070T 15/150/00/50 KES090T KES100T KES15T KES150T KES160T KES175T KES00T KES5T KES50T AKES50T HKDB3400FT33W HKDB3400FT3W HKDB3400FT35W HKDB3400FT36W 4KES00T 15/150/00/50 4KES5T A4KES50T1 4KES50T 4KES300T 00/40/60/80 A4KES00T5 4KES350T 30/340/360/380 4KES400T A4KES300T5 Volume 4 Circuit Protection CA E February 01 V4-T-173

174 .3 Types DK and KDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for reverse feed application. Types DK and KDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units 40 Vac Rated, 50 Vdc 600 Vac Rated, 50 Vdc Complete Circuit Breaker Complete Circuit Breaker Maximum Continuous Without Line and With Line With Standard Line and Without Line and Ampere Load Terminals Terminals Only Load Terminals Only Load Terminals at 40 C With Standard Line and Load Terminals Two-Pole 100 KDB100W KDB KDB15W KDB KDB150W KDB KDB175W KDB KDB00W KDB00 5 KDB5W KDB5 50 DK50W DK50Y DK50 KDB50W KDB DK300W DK300Y DK300 KDB300W KDB DK350W DK350Y DK350 KDB350W KDB DK400W DK400Y DK400 KDB400W KDB400 Three-Pole 100 KDB3100W KDB KDB315W KDB KDB3150W KDB KDB3175W KDB KDB300W KDB300 5 KDB35W KDB35 50 DK350W DK350Y DK350 KDB350W KDB DK3300W DK3300Y DK3300 KDB3300W KDB DK3350W DK3350Y DK3350 KDB3350W KDB DK3400W DK3400Y DK3400 KDB3400W KDB3400 V4-T-174 Volume 4 Circuit Protection CA E February 01

175 .3 Molded Case Switches Eaton s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489. Molded Case Switches 40 Vac Maximum, 50 Vdc 600 Vac Maximum, 50 Vdc 600 Vac Maximum, 50 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker with Standard Line and Load Terminals Note Molded case switches may open above 4000 amperes. Complete Circuit Breaker with Standard Line and Load Terminals Two-Pole 400 DK400K KD400K KDB400K HKD400K HKDB400K Three-Pole 400 DK3400K KD3400K KDB3400K HKD3400K HKDB3400K Four-Pole 400 KD4400K KDB4400K HKD4400K HKDB4400K Complete Circuit Breaker with Standard Line and Load Terminals. Suitable for Reverse Feed Use Volume 4 Circuit Protection CA E February 01 V4-T-175

176 .3 100% Rated Types CKD and CHKD Electronic Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. All 100% rated circuit breakers have electronic trip units. 100% Rated Types CKD and CHKD Electronic Circuit Breakers Three Pole Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only Digitrip 310 Plug Only Adjustable Standard Options Plug Maximum Continuous Ampere at 40 C Standard Interrupting Capacity 35 kaic at 480 Vac High Interrupting Capacity 65 kaic at 480 Vac Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay 1 Individually packed. 3TA400K terminal kit contains one terminal for each pole and one terminal cover. Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plug Ampere Standard Terminals Only See Page V4-T-187 for Optional Terminals 15 CKD3400F CHKD3400F KES315LS KES315LSI KES315LSG KES315LSIG 70 1KES070T 70/90/100/15 TA300K KES090T A1KES15T1 TA300K KES100T TA300K KES110T TA300K KES15T TA300K KES15T TA300K 1 50 CKD3400F CHKD3400F KES350LS KES350LSI KES350LSG KES350LSIG 70 KES070T 15/150/00/5 100 KES100T AKES50T1 TA300K 1 15 KES15T TA300K KES150T TA300K KES160T TA300K KES175T TA300K 1 00 KES00T TA300K 1 5 KES5T TA300K 1 50 KES50T TA350K CKD3400F CHKD3400F KES3400LS KES3400LSI KES3400LSG KES3400LSIG 00 4KES00T 00/50/300/400 TA300K 1 5 4KES5T A4KES400T1 TA300K KES50T 0/40/60/80 TA350K KES300T A4KES00T5 TA350K KES350T 30/340/360/380 TA350K KES400T A4KES300T5 3TA400K V4-T-176 Volume 4 Circuit Protection CA E February 01

177 .3 Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) ➀ S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 KD315T5W KD315T56W KD315T57W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 KD350T5W KD350T56W KD350T57W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A KD3400T5W KD3400T56W KD3400T57W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 Volume 4 Circuit Protection CA E February 01 V4-T-177

178 .3 Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA Ampere 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 HKD315T5W HKD315T56W HKD315T57W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 HKD350T5W HKD350T56W HKD350T57W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A HKD3400T5W HKD3400T56W HKD3400T57W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 V4-T-178 Volume 4 Circuit Protection CA E February 01

179 .3 Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA Ampere 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 KDC315T5W KDC315T56W KDC315T57W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 KDC350T5W KDC350T56W KDC350T57W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A KDC3400T5W KDC3400T56W KDC3400T57W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 Volume 4 Circuit Protection CA E February 01 V4-T-179

180 .3 Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C 1 Long delay I 4 t response selection limits short delay time to flat response. Factory sealed. L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 1050 LSIG LSIA Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 KD315T106W KD315T107W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 KD350T106W KD350T107W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A KD3400T106W KD3400T107W 00 ORPK40A00 5 ORPK40A 50 ORPK40A ORPK40A ORPK40A ORPK40A400 V4-T-180 Volume 4 Circuit Protection CA E February 01

181 .3 Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 1050 LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Factory sealed. Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 HKD315T106W HKD315T107W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 HKD350T106W HKD350T107W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A HKD3400T106W HKD3400T107W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 Volume 4 Circuit Protection CA E February 01 V4-T-181

182 .3 Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 1050 LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Factory sealed. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 KDC315T106W KDC315T107W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 KDC350T106W KDC350T107W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A KDC3400T106W KDC3400T107W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 V4-T-18 Volume 4 Circuit Protection CA E February 01

183 .3 100% Rated Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. 100% Rated Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number (refer to Page V4-T-316). Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 CKD315T5W CKD315T56W CKD315T57W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 CKD350T5W CKD350T56W CKD350T57W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A CKD3400T5W CKD3400T56W CKD3400T57W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 Volume 4 Circuit Protection CA E February 01 V4-T-183

184 .3 100% Rated Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 CHKD315T5W CHKD315T56W CHKD315T57W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 CHKD350T5W CHKD350T56W CHKD350T57W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A CHKD3400T5W CHKD3400T56W CHKD3400T57W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 V4-T-184 Volume 4 Circuit Protection CA E February 01

185 .3 100% Rated Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. 100% Rated Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C 1 Long delay I 4 t response selection limits short delay time to flat response. Factory sealed. OPTIM 1050 LSIG LSIA Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 CKD315T106W CKD315T107W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 CKD350T106W CKD350T107W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A CKD3400T106W CKD3400T107W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 Volume 4 Circuit Protection CA E February 01 V4-T-185

186 .3 100% Rated Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 1050 LSIG 1 Long delay I 4 t response selection limits short delay time to flat response. Factory sealed. LSIA Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 CHKD315T106W CHKD315T107W 70 ORPK15A70 90 ORPK15A ORPK15A ORPK15A ORPK15A15 50 CHKD350T106W CHKD350T107W 15 ORPK05A ORPK05A ORPK05A ORPK05A00 5 ORPK05A5 50 ORPK05A CHKD3400T106W CHKD3400T107W 00 ORPK40A00 5 ORPK40A5 50 ORPK40A ORPK40A ORPK40A ORPK40A400 V4-T-186 Volume 4 Circuit Protection CA E February 01

187 .3 Accessories Selection Guide and Ordering Guide Line and Load Terminals Eaton s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards Line and Load Terminals UL 486A and UL 486B and CSA Standard C. No. 65, or Electrical Bulletin Unless otherwise specified, K-Frame circuit breaker line and load terminals are shipped separately for field installation. 1 Individually packed. Terminal kits contain one terminal for each pole and one terminal cover. 3 Two-pole kit. 4 Three-pole kit. 5 Four-pole kit. 6 Terminal kits contain one terminal for each pole and three interphase barriers. Ordering Information K-Frame circuit breakers use Cu/AI terminals as standard. When optional copper or Cu/ AI terminals are required, order by catalog number. Specify if factory installation is required. TA401K TA400K, T400K TA350K, T350K TA300K, T300K T400KCW, TA400KCW, TA401KCW Maximum Breaker Amperes Terminal Body Material Wire Type AWG Wire Range/No. Conductors Metric Wire Range mm Terminal TA40K, T40K Terminals with Control Wire Termination Standard Cu/AI Pressure Terminals 5 Aluminum Cu/AI 3 350/(1) TA300K Aluminum Cu/AI /(1) TA350K Aluminum Cu/AI 3/0 50/() TA400K 3 TA400KCW Aluminum Cu/AI 3/0 50/() TA400K 4 3TA400KCW Aluminum Cu/AI 3/0 50/() TA400K 56 4TA400KCW 56 Optional Copper and Cu/AI Pressure Type Terminals 5 Copper Cu 3 350/(1) T300K Copper Cu /(1) T350K Copper Cu 3/0 50/() T400K 3 T400KCW Aluminum Cu/AI /0 50/() or /0 500/(1) Tab is 1/4 x.03 3T400K 4 3T400KCW 4 4T400K 5 4T400KCW TA401K 3 TA401KCW TA401K 4 3TA401KCW TA401K 56 4TA401KCW Aluminum Cu/AI /(1) TA40K 3 3TA40K 4 4TA40K Copper Cu /(1) T40K 3 3T40K 4 4T40K 56 Volume 4 Circuit Protection CA E February 01 V4-T-187

188 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. KD Frame Accessories Two-Pole 1 Three-Pole Four-Pole Reference Description Page Left Right Left Center Right Left Center Right Neutral Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-99 Alarm lockout (Make/Break) V4-T-99 Auxiliary switch (1A, 1B) V4-T-301 Auxiliary switch (A, B) V4-T-301 Auxiliary switch (3A, 3B) V4-T-301 Auxiliary switch and alarm switch combination V4-T-30 Shunt trip standard V4-T-305 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-313 PowerNet or zone interlock kit (OPTIM 550) V4-T-316 External Accessories End cap kit V4-T-331 Keeper nut V4-T-331 Control wire terminal kit V4-T-33 Terminal adapter V4-T-33 Multiwire connectors V4-T-333 Base mounting hardware V4-T-334 Terminal shields V4-T-336 Interphase barriers V4-T-336 Non-padlockable handle block V4-T-337 Padlockable handle block V4-T-337 Padlockable handle lock hasp V4-T-338 Cylinder lock V4-T-338 Key Interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Walking beam interlock requires two breakers V4-T-340 Electrical (solenoid) operator V4-T-341 Plug-in adapters V4-T-34 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 Handle extension V4-T-351 IQ Energy Sentinel V4-T-35 Solid-state (electronic) portable test kit V4-T-35 Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available 1 Two-pole breaker supplied in three-pole frame. Current carrying parts omitted from center pole. Shunt trip and UVR cannot be mounted in right poles on KES or OPTIM trip units. Standard internal accessories cannot be mounted in right pole on any K-Frame OPTIM trip unites. Special OPTIM ground fault and zone interlock accessories are available for field installation in the right pole of K-Frame 550 OPTIM trip units. Factory installed a/b and bell/aux are available for factory installation. K-Frame breakers equipped with OPTIM 1050 trip units include aux-bell alarm in the right pole. V4-T-188 Volume 4 Circuit Protection CA E February 01

189 .3 KD Frame Accessories, continued Description Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Technical Data and Specifications NEMA/UL 489/CSA Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Breaker Volts AC (50/60 Hz) Volts DC Type of Poles Two-pole breaker supplied in three-pole frame. Current carrying parts omitted from center pole. Two-pole circuit breaker or two outside poles of three-pole circuit breaker. 3 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 4 Current limiting. Reference Page Two-Pole 1 Three-Pole Four-Pole Left Right Left Center Right Left Center Right Neutral OPTIM System Components Three Poles Breaker interface module (BIM) V4-T-353 Digitrip OPTIMizer V4-T-353 Auxiliary power module V4-T-353 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application DK, KDB, 3, KD, 3, HKD, HKDB, 3, KDC 4, 3, CKD CHKD IEC (P1) Interrupting Capacity s Interrupting Capacity (ka Symmetrical Amperes) Circuit Volts AC (50/60 Hz) Volts DC Breaker Type of Poles DK, KDB, 3, KD, 3, HKD, HKDB, 3, KDC, 3, Volume 4 Circuit Protection CA E February 01 V4-T-189

190 .3 Specifications Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 rms sensing Yes Yes Yes Yes Breaker Type Frame K K K K Ampere range A A A A Interrupting rating at 480 volts 35, 65, 100 (ka) 35, 65, 100 (ka) 35, 65, 100 (ka) 35, 65, 100 (ka) Protection Ordering options LS, LSG LSI, LSIG LSI, LSI(A), LSIG LSI(A), LSIG Fixed rated plug (I n ) Yes Yes Yes Yes Overtemperature trip Yes Yes Yes Yes Long Delay Protection (L) Adjustable rating plug (I n ) Yes Yes No No Long delay pickup (I n ) (I n ) x (I n ) x (I n ) Long delay time I t 1 seconds 1 seconds 4 seconds 4 seconds Long delay time I 4 t No No 1 5 seconds 1 5 seconds Long delay thermal memory Yes Yes Yes Yes High load alarm No No x I r x I r Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) % x (I r ) % x (I r ) Short delay time I t 100 ms No ms ms Short delay time flat No Inst 300 ms ms ms Short delay time zone selective interlocking No No Yes Yes Instantaneous Protection (I) Instantaneous pickup No % x (I n ) % x (I n ) % x (I n ) Discriminator No No Yes Yes Instantaneous override Yes Yes Yes Yes Ground Fault Protection (G) Ground fault alarm No No 0 100% x (I s ) 0 100% x (I s ) Ground fault pickup Varies by frame 6 Varies by frame % x (I s ) 0 100% x (I s ) Ground fault delay I t No No ms ms Ground fault delay flat Inst 500 ms Inst 500 ms ms ms Ground fault zone selective interlocking No No Yes Yes Ground fault thermal memory Yes Yes Yes Yes System Diagnostics Status LEDs Yes Yes Yes Yes Cause of trip LEDs No No Yes Yes Magnitude of trip information No No Yes Yes Remote signal contact ground alarm Yes 3 Yes 3 Yes Yes Local auxiliary and bell alarm contact Optional Optional Optional Included Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 Adjust by rating plug. Zone interlock kit. 3 With separate ground fault alarm unit (GFAU). 4 By OPTIMizer/BIM. 5 Eaton s PowerNet kit ampere frame 1 5 x I g (80A). 50 ampere frame 1 5 x I g (50A). 15 ampere frame 1 5 x I g (5A). V4-T-190 Volume 4 Circuit Protection CA E February 01

191 .3 Specifications, continued Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 System Monitoring Digital display No No Yes 1 Yes 1 Current No No Yes Yes Power and energy No No No Yes Power quality harmonics No No No Yes Power factor No No No Yes Communications PowerNet No No Yes Yes Testing Testing method Test set Test set OPTIMizer, BIM, PowerNet OPTIMizer, BIM, PowerNet Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 By OPTIMizer/BIM. Eaton s PowerNet kit. Volume 4 Circuit Protection CA E February 01 V4-T-191

192 .3 Dimensions and Weights Approximate Dimensions in Inches (mm) KD Frame of Poles Width Height Depth, (149.7) (57.3) 4.10 (104.1) 4 7. (183.4) (57.3) 4.10 (104.1) KD-Frame, Two- and Three-Pole 0.19 R (4.8 R) 0.34 R (8.7 R) Front Cover Cutout C L Handle 1.31 (33.3).63 (66.7) (60.7) (11.5) 3.75 (95.3) 0.83 (1.0) 1.64 (41.7) 1.5 (31.8) Approximate Shipping Weight, Lbs (kg) KD Frame Front View 5.49 (139.4) Note 1 Weights shown are for thermal-magnetic trip units. Three-pole electronic trip units weigh.5 lbs (1.1 kg). ON OFF (57.) Complete Breaker Frame Only Trip Unit 1 Breaker Type Two-Pole Three-Pole Two-Pole Three-Pole Two-Pole Three-Pole DK 10.0 (4.5) 11.5 (5.) KDB 10.0 (4.5) 11.5 (5.) KD 10.0 (4.5) 11.5 (5.) 7.5 (3.4) 8.5 (3.9) 1.5 (0.7) 1.5 (0.7) HKD, HKDB 10.0 (4.5) 11.5 (5.) 7.5 (3.4) 8.5 (3.9) 1.5 (0.7) 1.5 (0.7) KDC 10.0 (4.5) 11.5 (5.) 7.5 (3.4) 8.5 (3.9) 1.5 (0.7) 1.5 (0.7) Side View 4.31 (109.6) V4-T-19 Volume 4 Circuit Protection CA E February 01

193 .3 Typical L-Frame Circuit Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-194 V4-T-195 V4-T-13 V4-T-15 V4-T-18 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 L-Frame ( Amperes) Product Description All Eaton L-Frame circuit breakers are HACR rated L-Frame circuit breakers are available as individual components (frame, trip unit, terminals), or factory assembled complete breakers L-Frame circuit breakers with non-interchangeable trip units are suitable for reverse feed use Standards and Certifications CE marked Volume 4 Circuit Protection CA E February 01 V4-T-193

194 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Thermal-Magnetic Trip Unit OPTIM Circuit Breaker/Frame Circuit Breaker/ Frame Type LD HLD LDC CLD CHLD CLDC Circuit Breaker/ Frame Type LDB LD HLD LDC CLD CHLD CLDC Trip Unit Type LT = Thermal Magnetic Digitrip RMS 310 Trip Unit of Poles 3 = 3 poles Trip Unit Type LES = Electronic of Poles = poles 3 = 3 poles 4 = 4 poles of Poles = poles 3 = 3 poles 4 = 4 poles LD F Circuit Breaker/ Frame Ampere LT T Trip Unit /Plug Ampere Circuit Breaker/ Frame Ampere 15 (Available on Model 1050 only) 50 (Available on Model 1050 only) of Poles 3 = 3 poles 4 = 4 poles LD 3 15 T5 7 W LES LS P Trip Unit Ampere 600 Suffix C = Copper terminals F = Frame only K = High magnetic molded case switch V = 50 C (thermal-magnetic trip units only) W = Without terminals X = Load side terminals only Y = Line side terminals only Suffix T = Trip unit thermal-magnetic fixed thermal adjustable magnetic V = 50 C calibration (thermal-magnetic trip units only) Suffix LS LSI LSG LSIG Trip Type = LSI (550 only) 6 = LSIG 7 = LSIA Trip Model T5 = Model 550 T10 = Model 1050 Suffix P = 100% protected neutral on four-pole trip unit Suffix W = Without terminals V4-T-194 Volume 4 Circuit Protection CA E February 01

195 .3 Product Selection Types LD, HLD and LDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Maximum Continuous Ampere at 40 C 1 Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Types LD, HLD and LDC Thermal-Magnetic Circuit Breakers Frame Only 1 Magnetic trip range 5 10 times continuous ampere rating. Individually packed. 3 Terminal kits contain one terminal for each pole and one terminal cover. 4 Neutral is in right pole. Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Factory Assembled Factory Assembled Circuit Circuit Consisting of Frame, Consisting of Frame, Trip Unit and Terminals Trip Unit and Terminals Thermal-Magnetic Trip Unit Only For Use with Standard or High or Ultra High Interrupting Frames Standard Terminals Only See Page V4-T-1 for Optional Terminals Two-Pole 300 LD300 HLD300 LDC300 LT300T TA60LD 350 LD350 HLD350 LDC350 LT350T TA60LD 400 LD400 HLD400 LDC400 LT400T TA60LD 450 LD450 HLD450 LDC450 LT450T TA60LD 500 LD500 HLD500 LDC500 LT500T TA60LD 600 LD600 HLD600 LDC600 LT600T TA603LDK 3 Three-Pole 300 LD3300 HLD3300 LDC3300 LT3300T TA60LD 350 LD3350 HLD3350 LDC3350 LT3350T TA60LD 400 LD3400 HLD3400 LDC3400 LT3400T TA60LD 450 LD3450 HLD3450 LDC3450 LT3450T TA60LD 500 LD3500 HLD3500 LDC3500 LT3500T TA60LD 600 LD3600 HLD3600 LDC3600 LT3600T 3TA603LDK 3 Four-Pole LD4300 HLD4300 LDC4300 LT4300T TA60LD 350 LD4350 HLD4350 LDC4350 LT4350T TA60LD 400 LD4400 HLD4400 LDC4400 LT4400T TA60LD 450 LD4450 HLD4450 LDC4450 LT4450T TA60LD 500 LD4500 HLD4500 LDC4500 LT4500T TA60LD 600 LD4600 HLD4600 LDC4600 LT4600T 4TA603LDK 3 Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Two-Pole LD600F HLD600F LDC600F Three-Pole LD3600F HLD3600F LDC3600F Four-Pole LD4600F HLD4600F LDC4600F Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Volume 4 Circuit Protection CA E February 01 V4-T-195

196 .3 Types LD, HLD and LDC Electronic Circuit Breakers with Interchangeable Trip Units Order as individual components: breaker frame, trip unit, rating plug, terminals. Types LD, HLD and LDC Electronic Circuit Breakers with Interchangeable Trip Units Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only Digitrip RMS 310 Plug Only Maximum Continuous Ampere at 40 C 1 Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 1 Individually packed. For AC use only. 3 Neutral is in right pole. 4 Terminal kits contain one terminal for each pole and one terminal cover. L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Ampere Fixed Plug Adjustable Plug Ampere Standard Terminals Only See Page V4-T-1 for Optional Terminals Three-Pole LD3600F HLD3600F LDC3600F LES3600LS LES3600LSI LES3600LSG LES3600LSIG 300 6LES300T 300/400/ TA60LD LES350T 500/600 A6LES600T1 TA60LD LES400T 40/440/ TA60LD LES450T 460/480 A6LES400T5 TA60LD LES500T 50/540/ 3TA603LDK LES600T 560/580 A6LES500T5 Four-Pole LD4600F HLD4600F LDC4600F LES4600LS LES4600LSI 300 6LES300T 300/400/ TA60LD 350 6LES350T 500/600 A6LES600T1 TA60LD 400 6LES400T 40/440/ TA60LD 450 6LES450T 460/480 A6LES400T5 TA60LD 500 6LES500T 50/540/ 4TA603LDK LES600T 560/580 A6LES500T5 V4-T-196 Volume 4 Circuit Protection CA E February 01

197 .3 Types LDB, HLDB and LDCB Electronic Circuit Breakers with Non-Interchangeable Electronic Trip Units Suitable for Reverse Feed Maximum Continuous Ampere at 40ºC Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay of Poles Circuit Breaker Frame Including Digitrip RMS 310 Electronic Tip Unit Less Terminals and Plug L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Time Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Digitrip RMS 310 Plug (Order as Separate Items) LS LSI LSG LSIG Fixed Adjustable 8 x I n 8 x I n 8 x I n 8 x I n I 300 ms ms Varies by frame Varies by frame ms ms Type LDB, HLDB and LDCB with Digitrip 310 Non-Interchangeable Trip Unit LDB3600FT33W LDB3600FT3W LDB3600FT35W LDB3600FT35W 6LES300T 300/400/500/600 6LES350T A6LES600T1 6LES400T 40/440/460/480 6LES450T A6LES400T5 6LES500T 50/540/560/580 6LES600T A6LES500T HLDB3600FT33W HLDB3600FT3W HLDB3600FT35W HLDB3600FT36W 6LES300T 300/400/500/600 6LES350T A6LES600T1 6LES400T 40/440/460/480 6LES450T A6LES400T5 6LES500T 50/540/560/580 6LES600T A6LES500T LDCB3600FT33W LDCB3600FT3W LDCB3600FT35W LDCB3600FT36W 6LES300T 300/400/500/600 6LES350T A6LES600T1 6LES400T 40/440/460/480 6LES450T A6LES400T5 6LES500T 6LES600T 50/540/560/580 A6LES500T5 Volume 4 Circuit Protection CA E February 01 V4-T-197

198 .3 100% Rated Types CLD, CHLD and CLDC Electronic Circuit Breakers with Interchangeable Trip Units The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. All 100% rated circuit breakers have electronic trip units. Order as individual components: breaker frame, trip unit, rating plug and terminals. 100% Rated Types CLD, CHLD and CLDC Electronic Circuit Breakers with Interchangeable Trip Units Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only Digitrip RMS 310 Plug Only Maximum Continuous Ampere at 40 C 1 Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac Standard Adjustable Short Time Pickup with I t Short Delay Ramp Options 1 Ampere rating is established by rating plug. Individually packed. 3 3TA603LDK terminal kit contains one terminal for each pole and one terminal cover. Independently Adjustable Short Time Pickup and Delay Ground Fault Protection Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plug Adjustable Plug Ampere Standard Terminals Only See Page V4-T-1 for Optional Terminals Three-Pole 600 CLD3600F CHLD3600F CLDC3600F LES3600LS LES3600LSI LES3600LSG LES3600LSIG 300 6LES300T 300/400/500/600 TA60LD 350 6LES350T A6LES600T1 TA60LD 400 6LES400T 40/440/460/480 TA60LD 450 6LES450T A6LES400T5 TA60LD 500 6LES500T 50/540/560/580 3TA603LDK LES600T A6LES500T5 3TA603LDK 3 V4-T-198 Volume 4 Circuit Protection CA E February 01

199 .3 Type LDB Thermal-Magnetic Circuit Breakers with Non- Interchangeable Trip Units 1 Maximum Continuous Ampere 600 Vac Rated, 50 Vdc Complete Circuit Breaker Without Line and Load Terminals Two-Pole 300 LDB300W LDB LDB350W LDB LDB400W LDB LDB450W LDB LDB500W LDB LDB600W LDB600 Three-Pole 300 LDB3300W LDB LDB3350W LDB LDB3400W LDB LDB3450W LDB LDB3500W LDB LDB3600W LDB3600 With Standard Line and Load Terminals Only Molded Case Switches Eaton s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker Molded Case Switches Maximum Continuous Ampere at 40 C 1 Factory sealed suitable for reverse feed application. Molded case switch will trip above 6000 amperes. components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL Vac Maximum, 50 Vdc Standard Terminals Only Circuit Breaker Only without Line and Load Terminals See Page V4-T-1 for Optional Terminals Two-Pole 600 LD600WK TA603LDK 600 LDB600WK 1 TA603LDK 600 HLD600WK TA603LDK Three-Pole 600 LD3600WK 3TA603LDK 600 LDB3600WK 1 3TA603LDK 600 HLD3600WK 3TA603LDK Four-Pole 600 LD4600WK 4TA603LDK 600 LDB4600WK 1 4TA603LDK 600 HLD4600WK 4TA603LDK Volume 4 Circuit Protection CA E February 01 V4-T-199

200 .3 Digitrip OPTIM Electronic Circuit Breaker with Interchangeable Plug Order as individual components: Breaker Frame (which includes Trip Unit), Plug, Terminals. Digitrip OPTIM 550 Electronic Circuit Breaker with Interchangeable Plug Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 LD315T5W LD315T56W LD315T57W ORPL15A070 ORPL15A090 ORPL15A100 ORPL15A110 ORPL15A15 50 LD350T5W LD350T56W LD350T57W ORPL05A15 ORPL05A150 ORPL05A175 ORPL05A00 ORPL05A5 ORPL05A LD3400T5W LD3400T56W LD3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A LD3600T5W LD3600T56W LD3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-00 Volume 4 Circuit Protection CA E February 01

201 .3 Digitrip OPTIM 550 Electronic Circuit Breaker with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM 550 LSI LSIG LSIA Ampere 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 HLD315T5W HLD315T56W HLD315T57W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 HLD350T5W HLD350T56W HLD350T57W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A HLD3400T5W HLD3400T56W HLD3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A HLD3600T5W HLD3600T56W HLD3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-01

202 .3 Digitrip OPTIM 550 Electronic Circuit Breaker with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 3 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSI LSIG LSIA Ampere 3 Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 LDC315T5W LDC315T56W LDC315T57W ORPL15A070 ORPL15A090 ORPL15A100 ORPL15A110 ORPL15A15 50 LDC350T5W LDC350T56W LDC350T57W ORPL05A15 ORPL05A150 ORPL05A175 ORPL05A00 ORPL05A5 ORPL05A LDC3400T5W LDC3400T56W LDC3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A LDC3600T5W LDC3600T56W LDC3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-0 Volume 4 Circuit Protection CA E February 01

203 .3 Digitrip OPTIM Electronic Circuit Breaker with Interchangeable Plug Order as individual components: Breaker Frame (which includes Trip Unit), Plug, Terminals. Digitrip OPTIM 1050 Electronic Circuit Breaker with Interchangeable Plug Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. OPTIM LSIG LSIA Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 LD315T106W LD315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 LD350T106W LD350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A LD3400T106W LD3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A LD3600T106W LD3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-03

204 .3 Digitrip OPTIM 1050 Electronic Circuit Breaker with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 HLD315T106W HLD315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 HLD350T106W HLD350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A HLD3400T106W HLD3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A HLD3600T106W HLD3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-04 Volume 4 Circuit Protection CA E February 01

205 .3 Digitrip OPTIM 1050 Electronic Circuit Breaker with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 LDC315T106W LDC315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 LDC350T106W LDC350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A LDC3400T106W LDC3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A LDC3600T106W LDC3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-05

206 .3 100% Rated Digitrip OPTIM Circuit Breakers with Interchangeable Plug Order as individual components: Breaker Frame (which includes Trip Unit), Plug, Terminals. 100% Rated Digitrip OPTIM 550 Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 CLD315T5W CLD315T56W CLD315T57W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 CLD350T5W CLD350T56W CLD315T57W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CLD3400T5W CLD3400T56W CLD3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A CLD3600T5W CLD3600T56W CLD3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-06 Volume 4 Circuit Protection CA E February 01

207 .3 100% Rated Digitrip OPTIM 550 Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 CHLD315T5W CHLD315T56W CHLD315T57W 70 ORPL15A ORPL15A ORPL15A ORPL15A15 15 ORPL15A15 50 CHLD350T5W CHLD350T56W CHLD315T57W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CHLD3400T5W CHLD3400T56W CHLD3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A CHLD3600T5W CHLD3600T56W CHLD3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-07

208 .3 100% Rated Digitrip OPTIM 550 Circuit Breakers with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 CLDC315T5W CLDC315T56W CLDC315T57W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 CLDC350T5W CLDC350T56W CLDC315T57W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CLDC3400T5W CLDC3400T56W CLDC3400T57W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A CLDC3600T5W CLDC3600T56W CLDC3600T57W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-08 Volume 4 Circuit Protection CA E February 01

209 .3 100% Rated Digitrip OPTIM 1050 Circuit Breakers with Interchangeable Plug Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 35 kaic at 480 Vac 15 CLD315T106W CLD315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 CLD350T106W CLD350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CLD3400T106W CLD3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A CLD3600T106W CLD3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-09

210 .3 100% Rated Digitrip OPTIM 1050 Circuit Breakers with Interchangeable Plug, continued Maximum Continuous Ampere at 40 C Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 15 CHLD315T106W CHLD315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 CHLD350T106W CHLD350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CHLD3400T106W CHLD3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A CHLD3600T106W CHLD3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 V4-T-10 Volume 4 Circuit Protection CA E February 01

211 .3 100% Rated Digitrip OPTIM 1050 Electronic Circuit Breaker with Interchangeable Plug, continued Circuit Breaker Frame Only Digitrip OPTIM Plug Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell alarm switch supplied with breaker as standard. 3 Factory sealed. Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity Current Limiting 600 Vac Rated 100 kaic at 480 Vac 15 CLDC315T106W CLDC315T107W 70 ORPL15A ORPL15A ORPL15A ORPL15A ORPL15A15 50 CLDC350T106W CLDC350T107W 15 ORPL05A ORPL05A ORPL05A ORPL05A00 5 ORPL05A5 50 ORPL05A CLDC3400T106W CLDC3400T107W 00 ORPL40A00 5 ORPL40A5 50 ORPL40A ORPL40A ORPL40A ORPL40A CLDC3600T106W CLDC3600T107W 300 ORPL60A ORPL60A ORPL60A ORPL60A ORPL60A600 Volume 4 Circuit Protection CA E February 01 V4-T-11

212 .3 Accessories Selection Guide and Ordering Information Line and Load Terminals Eaton s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA Standard C. No. 65M. Unless otherwise specified, Terminals TA401LD or TA603LD Terminal (Step-Type Terminal Requires Terminal Cover and Warning Label. See Inset.) Line and Load Terminals Maximum Breaker Amperes L-Frame circuit breaker line and load terminals are shipped separately for field installation. The wire connecting terminal is secured with two panhead, slotted screws and lockwashers that can be checked for the correct torque loading or retightened from the front of the circuit 1 Terminal kits contain one terminal for each pole and one terminal cover. Individually packed. Terminal Body Material Wire Type Pan-Head Screws and Lockwashers AWG Wire Range/ of Conductors TA450LD or TA60LD or T60LD Terminal Circuit Breaker Line Terminal Cover Metric Wire Range mm breaker before installation of the conductors. (Applies to all styles.) The circuit breaker line/load terminal conductors are positioned in the conducting holes in the wire connecting terminal and are secured with recessed socket screws that are tightened to the correct torque loading from the front of the circuit breaker. Pan-Head Screws and Lockwashers (Installed before Cable Clamping Screws) Terminal Poles Ordering Information L-Frame circuit breakers use Cu/AI terminals as standard. When optional copper terminals are required, order by catalog. Specify if factory installation is required. Terminal Cover Warning Label Retainer Terminals with Control Wire Termination Standard Cu/AI Pressure Terminals 400 Aluminum Cu/AI 4/0 600 (1) Two-pole kit 1 TA401LDK 400 Aluminum Cu/AI 4/0 600 (1) Three-pole kit 1 3TA401LDK 400 Aluminum Cu/AI 4/0 600 (1) Four-pole kit 1 4TA401LDK 450 Aluminum Cu/AI 4 4/0 () 5 95 TA450LD 500 Aluminum Cu/AI 3/0 350 () TA60LD TA60LDCW 600 Aluminum Cu/AI () Two-pole kit 1 TA603LDK TA603LDKCW 600 Aluminum Cu/AI () Three-pole kit 1 3TA603LDK 3TA603LDKCW 600 Aluminum Cu/AI () Four-pole kit 1 4TA603LDK 4TA603LDKCW Optional Copper and Cu/AI Pressure Type Terminals 600 Copper Cu () T60LD T60LDCW Screws V4-T-1 Volume 4 Circuit Protection CA E February 01

213 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. LD Frame Accessories Description Internal Accessories (Only One Internal Accessory Per Pole) 3 Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Reference Page Two-Pole 1, Three-Pole Four-Pole Left Center Right Left Center Right Neutral Alarm lockout (Make/Break) V4-T-99 Alarm lockout (Make/Break) V4-T-99 Auxiliary switch (1A, 1B) V4-T-301 Auxiliary switch (A, B) V4-T-301 Auxiliary switch (3A, 3B) V4-T-301 Auxiliary switch (1A, 1B) and alarm switch combination V4-T-303 Auxiliary switch (A, B) and alarm switch combination V4-T-303 Shunt trip standard 4 V4-T-305 Shunt trip low energy 4 V4-T-308 Undervoltage release mechanism 4 V4-T-314 Eaton PowerNet communications kit (OPTIM 550) V4-T-316 External Accessories End cap kit V4-T-331 Control wire terminal kit V4-T-33 Base mounting hardware V4-T-334 Terminal shields V4-T-336 Interphase barriers V4-T-336 Non-padlockable handle block V4-T-337 Padlockable handle lock hasp V4-T-338 Key interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Walking beam interlock requires two breakers V4-T-340 Electrical (motor) operator V4-T-341 Plug-in adapters V4-T-343 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 Handle extension V4-T-351 Solid-state (electronic) portable test kit V4-T-35 1 Two-pole breaker supplied in three-pole frame. Current carrying parts omitted from center pole. Refer to Eaton for appropriate neutral pole accessory combinations. 3 OPTIM model 1050 is factory sealed and does not have the right pole space available for accessories. 4 Shunt trip and UVR cannot be mounted in right poles on LES or OPTIM trip units. Standard non-tripping internal accessories can be mounted in the left or right poles of LES and 550 OPTIM trip units. Volume 4 Circuit Protection CA E February 01 V4-T-13

214 .3 LD Frame Accessories, continued Description Reference Page Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available 1 Two-pole breaker supplied in three-pole frame. Current carrying parts omitted from center pole. Refer to Eaton for appropriate neutral pole accessory combinations. Two-Pole 1, Three-Pole Four-Pole Left Center Right Left Center Right Neutral OPTIM System Components Three Poles Ground fault alarm unit V4-T-35 Potential transformer module V4-T-35 Breaker interface module (BIM) V4-T-353 Digitrip OPTIMizer V4-T-353 Auxiliary power module V4-T-353 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application V4-T-14 Volume 4 Circuit Protection CA E February 01

215 .3 Technical Data and Specifications UL 489 Interrupting Capacity s 1 Circuit Breaker Type of Poles Interrupting Capacity (ka rms Symmetrical Amperes) Volts AC (50/60 Hz) Volts DC LDB, LD, 3, CLD 4, 3, HLD, HLDB, 3, CHLD 4, 3, LDC, LDCB 5, 3, CLDC 45, 3, IEC 947- Interrupting Capacity s 1 Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) Volts DC Circuit Breaker Type of Poles I cu I cs I cu I cs I cu I cs I cu I cs LDB, LD, 3, CLD 4, 3, HLD, HLDB, 3, CHLD 4, 3, LDC, LDCB, 3, CLDC 4, 3, Utilization Category A circuit breakers. L/R = 8 milliseconds minimum. 3 Two-pole circuit breaker or two poles of three-pole circuit breaker. Incorporating thermal-magnetic trip unit only % rated breakers. 5 Current limiting. Volume 4 Circuit Protection CA E February 01 V4-T-15

216 .3 Specifications Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 rms sensing Yes Yes Yes Yes Breaker Type Frame L L L L Ampere range A A A A Interrupting rating at 480 volts 35, 65, 100 (ka) 35, 65, 100 (ka) 35, 65, 100 (ka) 35, 65, 100 (ka) Protection Ordering options LS, LSG LSI, LSIG LSI, LSI(A), LSIG LSI(A), LSIG Fixed rated plug (I n ) Yes Yes Yes Yes Overtemperature trip Yes Yes Yes Yes Long Delay Protection (L) Adjustable rating plug (I n ) Yes Yes No No Long delay pickup (I n ) (I n ) x (I n ) x (I n ) Long delay time I t 1 seconds 1 seconds 4 seconds 4 seconds Long delay time I 4 t No No 1 5 seconds 1 5 seconds Long delay thermal memory Yes Yes Yes Yes High load alarm No No x I r x I r Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) % x (I r ) % x (I r ) Short delay time I t 100 ms No ms ms Short delay time flat No Inst 300 ms ms ms Short delay time zone selective interlocking No No Yes 4 Yes Instantaneous Protection (I) Instantaneous pickup No % x (I n ) % x (I n ) % x (I n ) Discriminator No No Yes Yes Instantaneous override Yes Yes Yes Yes Ground Fault Protection (G) Ground fault alarm No No 0 100% x (I s ) 0 100% x (I s ) Ground fault pickup 1 5 x I g (10A) 1 5 x I g (10A) 0 100% x (I s ) 0 100% x (I s ) Ground fault delay I t No No ms ms Ground fault delay flat Inst 500 ms Inst 500 ms ms ms Ground fault zone selective interlocking No No Yes 4 Yes Ground fault thermal memory Yes Yes Yes Yes System Diagnostics Status LEDs Yes Yes Yes Yes Cause of trip LEDs No No Yes Yes Magnitude of trip information No No Yes Yes Remote signal contact ground alarm Yes 5 Yes 5 Yes 4 Yes Local auxiliary and bell alarm contact Optional Optional Optional Included Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 Adjust by rating plug. By OPTIMizer/BIM. 3 Eaton s PowerNet kit. 4 Zone interlock kit. 5 With separate ground fault alarm unit (GFAU). V4-T-16 Volume 4 Circuit Protection CA E February 01

217 .3 Specifications, continued Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 System Monitoring Digital display No No Yes 1 Yes 1 Current No No Yes Yes Power and energy No No No Yes Power quality harmonics No No No Yes Power factor No No No Yes Communications PowerNet No No Yes Yes Testing Testing method Test set Test set OPTIMizer, BIM, PowerNet OPTIMizer, BIM, Power- Net Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 By OPTIMizer/BIM. Eaton s PowerNet kit. Volume 4 Circuit Protection CA E February 01 V4-T-17

218 .3 Dimensions and Weights Dimensions in Inches (mm) LD Frame of Poles Width Height Depth, (09.6) (73.1) 4.06 (103.1) (79.4) (73.1) 4.06 (103.1) LD-Frame, Two- and Three-Pole CL Handle Front Cover Cutout 3.44 (87.3) 1.7 (43.7) 3.64 (9.5) Breaker CL 0.5 (6.4) R 7.8 (184.9) 3.8 (83.3) 1.33 (33.7).9 (58.) 1.50 (38.1) 0.19 R (4.8) R Front View 8.5 (09.6) (73.1) Side View Approximate Shipping Weight, Lbs (kg) LD Frame Complete Breaker Frame Only Trip Unit Breaker Type Two-Pole Three-Pole Four-Pole Two-Pole Three-Pole Four-Pole Two-Pole Three-Pole Four-Pole 3.81 (96.8) 8.1 (08.6) LD, HLD, LDC 18 (8.) 0 (9.1) 5 (11.3) 14 (6.4) 15 (6.8) 0 (9.1) 3 (1.4) 4 (1.8) 5 (.3) LDB 18 (8.) 0 (9.1) 5 (11.3) V4-T-18 Volume 4 Circuit Protection CA E February 01

219 .3 Typical M-Frame Circuit Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-0 V4-T-1 V4-T-6 V4-T-7 V4-T-9 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 M-Frame ( Amperes) Product Description All Eaton M-Frame circuit breakers are HACR rated MDL-Frame circuit breakers are available as individual components (frame, trip unit, terminals), or factory assembled complete breakers MDLB, HMDLB-Frame circuit breakers with noninterchangeable trip units are suitable for reverse feed use Standards and Certifications CE marked Volume 4 Circuit Protection CA E February 01 V4-T-19

220 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Thermal-Magnetic Trip Unit Note 1 Thermal-magnetic only. Circuit Breaker/ Frame Type MDL, MDLB HMDL, HMDLB Trip Unit Type MT MES of Poles = poles 3 = 3 poles of Poles = poles 3 = 3 poles MDL F Circuit Breaker/ Frame Ampere MT T Trip Unit / Plug Ampere Suffix F = Frame only K = High magnetic molded case switch V = 50 C (thermal-magnetic trip units only) W = Without terminals X = Load side terminals only Y = Line side terminals only Suffix T = Thermal-magnetic V = 50 C (thermal-magnetic trip units only) LS = Digitrip RMS 310 LSI = Digitrip RMS 310 LSG = Digitrip RMS 310 LSIG = Digitrip RMS 310 V4-T-0 Volume 4 Circuit Protection CA E February 01

221 .3 Product Selection Types MDL and HMDL Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Two-Pole Maximum Continuous Ampere at 40 C Types MDL and HMDL Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units Three-Pole Note 1 Two terminals are required per pole. Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Frame Only High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Frame Only Thermal-Magnetic Trip Unit Only For Use with Standard or High or Ultra High Interrupting Frames Magnetic Trip Range is 5 10 Up Through 600A; 4 8 on 700 and 800A x Continuous Ampere Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals 300 MDL300 MDL800F HMDL300 HMDL800F MT300T TA700MA1 350 MDL350 HMDL350 MT350T TA700MA1 400 MDL400 HMDL400 MT400T TA700MA1 450 MDL450 HMDL450 MT450T TA700MA1 500 MDL500 HMDL500 MT500T TA700MA1 600 MDL600 HMDL600 MT600T TA700MA1 700 MDL700 HMDL700 MT700T TA700MA1 800 MDL800 HMDL800 MT800T TA800MA Maximum Continuous Ampere at 40 C Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Frame Only High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Frame Only Thermal-Magnetic Trip Unit Only For Use with Standard or High or Ultra High Interrupting Frames Magnetic Trip Range is 5 10 Up Through 600A; 4 8 on 700 and 800A x Continuous Ampere Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals 300 MDL3300 MDL3800F HMDL3300 HMDL3800F MT3300T TA700MA1 350 MDL3350 HMDL3350 MT3400T TA700MA1 400 MDL3400 HMDL3400 MT3400T TA700MA1 450 MDL3450 HMDL3450 MT3450T TA700MA1 500 MDL3500 HMDL3500 MT3500T TA700MA1 600 MDL3600 HMDL3600 MT3600T TA700MA1 700 MDL3700 HMDL3700 MT3700T TA700MA1 800 MDL3800 HMDL3800 MT3800T TA800MA Volume 4 Circuit Protection CA E February 01 V4-T-1

222 .3 Types MDLB and HMDLB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Two-Pole 1 Maximum Continuous Ampere at 40 C Types MDLB and HMDLB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Three Pole 1 1 Factory sealed for reverse feed application. Two terminals are required per pole. Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Standard Terminals Only See Page V4-T-5 for Optional Terminals 300 MDLB300 HMDLB300 TA700MA1 350 MDLB350 HMDLB350 TA700MA1 400 MDLB400 HMDLB400 TA700MA1 450 MDLB450 HMDLB450 TA700MA1 500 MDLB500 HMDLB500 TA700MA1 600 MDLB600 HMDLB600 TA700MA1 700 MDLB700 HMDLB700 TA700MA1 800 MDLB800 HMDLB800 TA800MA Maximum Continuous Ampere at 40 C Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Factory Assembled Circuit Consisting of Frame, Trip Unit and Terminals Standard Terminals Only See Page V4-T-5 for Optional Terminals 300 MDLB3300 HMDLB3300 TA700MA1 350 MDLB3350 HMDLB3350 TA700MA1 400 MDLB3400 HMDLB3400 TA700MA1 450 MDLB3450 HMDLB3450 TA700MA1 500 MDLB3500 HMDLB3500 TA700MA1 600 MDLB3600 HMDLB3600 TA700MA1 700 MDLB3700 HMDLB3700 TA700MA1 800 MDLB3800 HMDLB3800 TA800MA V4-T- Volume 4 Circuit Protection CA E February 01

223 .3 Types MDL and HMDL Electronic Circuit Breakers with Interchangeable Trip Units Order as Individual Components: breaker frame, trip unit, rating plug, terminals. Types MDL and HMDL Electronic Circuit Breakers with Interchangeable Trip Units Three-Pole Maximum Continuous Ampere at 40 C 1 Types MDLB and HMDLB Electronic Circuit Breakers with Non-Interchangeable Trip Units 3 Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only Digitrip RMS 310 Plug Only Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac L Adjustable Long Delay Pickup (by Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) 1 Ampere rating is established by rating plug. For AC use only. 3 Factory sealed, suitable for reverse feed application. CMDLB and CHMDLB are also available. Ampere Fixed Plug Adjustable Plugs Ampere 800 MDL3800F HMDL3800F MES3800LS MES3800LSI MES400T 8MES500T 400/500/600/800 A8MES800T MES3800LSG 600 8MES600T 60/640/660/680 MES3800LSIG 700 8MES700T A8MES600T MES800T 70/740/760/780 A8MES700T5 Maximum Continuous Ampere at 40 C 1 Factory-Assembled Circuit Breaker Consisting of Frame and Trip Unit LS LSI LSG LSIG Three-Pole Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac 800 MDLB3800T33W MDLB3800T3W MDLB3800T35W MDLB3800T36W Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 800 HMDLB3800T33W HMDLB3800T3W HMDLB3800T35W HMDLB3800T36W Terminals See Page V4-T-5 for standard and optional terminals Volume 4 Circuit Protection CA E February 01 V4-T-3

224 .3 100% Rated Types CMDL and CHMDL Electronic Circuit Breakers with Non-Interchangeable Trip Units The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. All 100% rated circuit breakers have electronic trip units. Order as individual components: breaker frame, trip unit, rating plug and terminals. 100% Rated Types CMDL and CHMDL Electronic Circuit Breakers with Interchangeable Trip Units Three-Pole Maximum Continuous Ampere at 40 C 1 Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only Digitrip RMS 310 Trip Unit Only Adjustable Standard Options Plug Standard Interrupting Capacity 50 kaic at 480 Vac High Interrupting Capacity 65 kaic at 480 Vac Molded Case Switches Eaton s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker Adjustable Short Time Pickup with I t Short Delay Ramp 1 Ampere rating is established by rating plug. For AC use only. 3 MDLB and HMDLB are suitable for reverse feed applications. Molded case switch may trip above 6000 amperes. Independently Adjustable Short Time Pickup and Delay Ground Fault Protection components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489. Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Ground Fault Protection Ampere Fixed Plug Ampere 800 CMDL3800F CHMDL3800F MES3800LS MES3800LSI MES3800LSG MES3800LSIG MES400T 8MES500T 400/500/600/800 A8MES800T 600 8MES600T 60/640/660/ MES700T A8MES600T MES800T 70/740/760/780 A8MES700T5 Molded Case Switches 600 Vac Maximum, 50 Vdc Maximum Circuit Breaker Only without Continuous Line and Load Terminals Ampere at 40 C Two-Pole 800 MDL800WK MDLB800WK 3 HMDL800WK Three-Pole 800 MDL3800WK MDLB3800WK 3 HMDL3800WK Terminals See Page V4-T-5 for standard and optional terminals V4-T-4 Volume 4 Circuit Protection CA E February 01

225 .3 Accessories Selection Guide and Ordering Information Line and Load Terminals M-Frame circuit breakers use Cu/AI terminals as standard. When optional copper or Cu/ AI terminals are required, order by catalog number. Specify if factory installation is required. TA700MA1 TA800MA TA801MA Line and Load Terminals Maximum Breaker Amperes Terminal Body Material Wire Type AWG Wire Range/No. Conductors Terminal Terminals with Control Wire Termination Standard Cu/AI Pressure Terminals 700 Aluminum Cu/AI () kcmil TA700MA1 TA700MA1CWT 800 std. Aluminum Cu/AI (3) 3/0 400 kcmil TA800MA TA800MACWT 800 Aluminum Cu/AI () kcmil TA801MA TA801MACWT Optional Copper and Cu/AI Pressure Type Terminals 600 Copper Cu () /0 500 kcmil T600MA1 800 Copper Cu (3) 3/0 300 kcmil T800MA1 Volume 4 Circuit Protection CA E February 01 V4-T-5

226 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. MD Frame Accessories Description Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Reference Page 1 Two-pole breaker supplied in three-pole frame. Current carrying parts omitted from center pole. Shunt trip and UVR cannot be mounted in right poles on MES trip units. Two-Pole 1 Three-Pole Left Right Left Center Right Internal Accessories (Only One Internal Accessory Per Pole) Alarm lockout (Make/Break) V4-T-99 Alarm lockout (Make/Break) V4-T-99 Auxiliary switch (1A, 1B) V4-T-301 Auxiliary switch (A, B) V4-T-301 Auxiliary switch (3A, 3B) V4-T-301 Auxiliary switch (1A, 1B) and alarm switch combination V4-T-303 Auxiliary switch (A, B) and alarm switch combination V4-T-303 Shunt trip standard V4-T-306 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-314 External Accessories Base mounting hardware V4-T-334 Terminal shields V4-T-336 Interphase barriers V4-T-336 Non-padlockable handle block V4-T-337 Padlockable handle lock hasp V4-T-338 Key interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Walking beam interlock requires two breakers V4-T-340 Electrical (motor) operator V4-T-341 Plug-in adapters V4-T-343 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 Handle extension V4-T-351 Solid-state (electronic) portable test kit V4-T-35 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application V4-T-6 Volume 4 Circuit Protection CA E February 01

227 .3 Technical Data and Specifications UL 489/CSA Interrupting Capacity s 1 Circuit Breaker Type of Poles IEC 947- Interrupting Capacity s 1 Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) Volts DC MDL, MDLB, CMDL, HMDL, HMDLB, CHMDL, Circuit Breaker Type of Poles Interrupting Capacity rms (ka Symmetrical Amperes) I CU I CS Volts AC (50/60 Hz) Volts DC MDL, MDLB, 3 65/65 50/50 0/10 0/10 CMDL, 3 65/65 50/50 0/10 HMDL, HMDLB, 3 100/100 70/50 5/13 0/10 CHMDL, 3 100/100 70/50 5/13 1 Utilization Category A circuit breakers. Two-pole or two poles of three-pole circuit breaker. Thermal-magnetic trip units only, MDL, HMDL breakers with electronic trip unit are not DC rated. 3 Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds at ka. Volume 4 Circuit Protection CA E February 01 V4-T-7

228 .3 Specifications MDL-Frame Digitrip Trip Unit Type Digitrip RMS 310 rms sensing Yes Yes Breaker Type Frame MDL, MDLB, CMDL, HMDL, HMDLB, CHMDL MDL, MDLB, CMDL, HMDL, HMDLB, CHMDL Ampere range A A Interrupting rating at 480 volts 50, 65 (ka) 50, 65 (ka) Protection Ordering options LS, LSG LSI, LSIG Fixed rated plug (I n ) Yes Yes Overtemperature trip Yes Yes Long Delay Protection (L) Adjustable rating plug (I n ) Yes Yes Long delay pickup (I n ) (I n ) 1 Long delay time I t 1 seconds 1 seconds Long delay time I 4 t No No Long delay thermal memory Yes Yes High load alarm No No Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) Short delay time I t 100 ms No Short delay time flat No Inst 300 ms Short delay time zone selective interlocking No No Instantaneous Protection (I) Instantaneous pickup No % x (I n ) Discriminator No No Instantaneous override Yes Yes Ground Fault Protection (G) Ground fault alarm No No Ground fault pickup 1 5 x I g (160A) 1 5 x I g (160A) Ground fault delay I t No No Ground fault delay flat Inst 500 ms Inst 500 ms Ground fault zone selective interlocking No No Ground fault thermal memory Yes Yes System Diagnostics Status LEDs Yes Yes Cause of trip LEDs No No Magnitude of trip information No No Remote signal contacts ground alarm Yes Yes System Monitoring Digital display No No Current No No Power and energy No No Power quality harmonics No No Power factor No No Communications Eaton s PowerNet No No Testing Testing method Test set Test set Legend I n = Plug 1 Adjust by rating plug. With separate ground fault alarm unit (GFAU). V4-T-8 Volume 4 Circuit Protection CA E February 01

229 .3 Dimensions and Weights Dimensions in Inches (mm) MD Frame of Poles Width Height Depth, (09.6) (406.4) 4.06 (103.1) MDL-Frame, Two- and Three-Pole R 0.19 (4.8) 1.7 (43.7) 1.50 (38.1) C L Handle Drilling Plan 3.44 (87.3) 3.64 (9.5) 7.8 (184.9) Approximate Shipping Weight, Lbs (kg) MD Frame Note 1 Thermal-magnetic only. C L Breaker R 0.5 (6.4) 1.33 (33.7) 3.8 (83.3) 0.97 (4.6) (406.4) Front View 8.5 (09.6) Complete Breaker Frame Only Trip Unit 1 Breaker Type Two-Pole Three-Pole Two-Pole Three-Pole Two-Pole Three-Pole MDL, HMDL (T/M T.U.) 6.5 (1.0) 9.0 (13.) 4.5 (11.1) 6.0 (11.8).5 (1.1) 3.0 (1.4) MDL, HMDL (Elec. T.U.) 30.0 (13.6) 6.0 (11.8) 4.0 (1.8) Side View 4.06 (103.) Volume 4 Circuit Protection CA E February 01 V4-T-9

230 .3 Typical N-Frame Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-31 V4-T-3 V4-T-53 V4-T-54 V4-T-57 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 N-Frame ( Amperes) Product Description All Eaton N-Frame circuit breakers are suitable for reverse feed use All N-Frame circuit breakers are HACR rated V4-T-30 Volume 4 Circuit Protection CA E February 01

231 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Circuit Breaker/ Frame Type ND HND NDC NDU CND CHND CNDC of Poles = poles 3 = 3 poles 4 = 4 poles Circuit Breaker/Frame Ampere 800 = 800 amperes 1 = 100 amperes ND 3 1 T3 W Trip Model T3 = Model 310 T5 = Model 550 T7 = Model 750 T10 = Model 1050 Trip Type = LSI 3 = LS 5 = LSG 6 = LSIG 7 = LSIA Suffix E = 100% R.P. protected (four-pole) EH = 50% R.P. protected (four-pole) K = High magnetic molded case switch W = Without terminals X = Load only terminals Y = Line only terminals Volume 4 Circuit Protection CA E February 01 V4-T-31

232 .3 Product Selection Type ND Electronic Circuit Breakers with Non-Interchangeable Trip Units Order as individual components: breaker frame, rating plug, terminals. Type ND Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Adjustable Plug Standard Options Maximum Continuous Ampere at 40 C Note Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 ND800T33W ND800T3W ND800T35W ND800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 ND1T33W ND1T3W ND1T35W ND1T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB1 Three-Pole 800 ND3800T33W or ND4800T33EW (100% Neutral) NES1000T TA1000NB NES100T TA100NB1 ND3800T3W ND3800T35W ND3800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 ND31T33W ND31T3W ND31T35W ND31T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 V4-T-3 Volume 4 Circuit Protection CA E February 01

233 .3 Type ND Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Adjustable Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Neutral is in right pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole 800 ND4800T33W ND4800T3W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 ND41T33W ND41T3W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-33

234 .3 Type HND Electronic Circuit Breakers with Non-Interchangeable Trip Units Order as individual components: breaker frame, rating plug, terminals. Type HND Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Adjustable Plug Standard Options Maximum Continuous Ampere at 40 C Note Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 HND800T33W HND800T3W HND800T35W HND800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 HND1T33W HND1T3W HND1T35W HND1T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Three-Pole 800 HND3800T33W HND3800T3W HND3800T35W HND3800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 HND31T33W HND31T3W HND31T35W HND31T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 V4-T-34 Volume 4 Circuit Protection CA E February 01

235 .3 Type HND Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Neutral is in right pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Plug Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole 800 HND4800T33W HND4800T3W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 HND41T33W HND41T3W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-35

236 .3 Type NDC Electronic Circuit Breakers with Non-Interchangeable Trip Units Order as individual components: breaker frame, rating plug, terminals. Type NDC Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Note Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 NDC800T33W NDC800T3W NDC800T35W NDC800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB 500 8NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 NDC1T33W NDC1T3W NDC1T35W NDC1T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Three-Pole 800 NDC3800T33W NDC3800T3W NDC3800T35W NDC3800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 NDC31T33W NDC31T3W NDC31T35W NDC31T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB 900 1NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 V4-T-36 Volume 4 Circuit Protection CA E February 01

237 .3 Type NDC Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp 1 Two terminals are required per pole. Neutral is in right pole. Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole 800 NDC4800T33W NDC4800T3W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 NDC41T33W NDC41T3W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-37

238 .3 Type ND, 100 Amperes 150 ka at 480 Vac Type NDU Ultra High Capacity U e Max. 600 Vac, 150 ka I cu at 480 Vac Circuit Breaker Frame Including Digitrip RMS 310 Electronic Tip Unit Less Terminals and Plug 1 Maximum Continuous Ampere at 40ºC 3 Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay 1 Order terminals separately. For AC use only. 3 ND MCCBs are suitable for 40 C or 50 C applications. Order suffix V3 to eliminate standard 40 C labeling. 4 Unprotected left pole neutral. Insert E for 100% neutral or EH for 60% neutral between W and P (e.g., NDS41T3EHP08). Neutral is on LH side. Non-UL listed ND 150 with 150 ampere trip unit is also available. L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Time Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) of Poles LS LSI LSG LSIG 8 x I n 8 x I n I 300 ms 8 x I n Varies by frame ms 8 x I n ms Varies by frame ms Ampere Interchangeable Plugs (Order as Individual Component) Fixed Plug Included with Breaker Adjustable Plug Adjustable Ampere Setting NDU3800T33W NDU3800T3W NDU3800T35W NDU3800T36W 400 8NES400T 400/500/ 450 8NES450T 600/800 A8NES800T NES500T 550 8NES550T 600 8NES600T 630 8NES630T 700 8NES700T 800 8NES800T 4 4 NDU4800T33W NDU4800T3W 400 8NES400T 400/500/ 450 8NES450T 600/800 A8NES800T NES500T 550 8NES550T 600 8NES600T 630 8NES630T 700 8NES700T 800 8NES800T V4-T-38 Volume 4 Circuit Protection CA E February 01

239 .3 100% Rated Type CND Electronic Circuit Breakers with Non-Interchangeable Trip Units The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. Order as individual components: breaker frame, rating plug, terminals. 100% Rated Type CND Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Adjustable Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Two terminals are required per pole. For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Terminal ordered separate. Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 CND800T33W CND800T3W CND800T35W CND800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CND1T33W CND1T3W CND1T35W CND1T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Three-Pole 800 CND3800T33W CND3800T3W CND3800T35W CND3800T36W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB 500 8NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CND31T33W CND31T3W CND31T35W CND31T36W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-39

240 .3 100% Rated Type CND Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac Adjustable Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Two terminals are required per pole. Neutral is in right pole. 3 For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Terminal ordered separate. Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole CND4800T33W CND4800T3W 400 8NES400T Adjustable settings are: TA700NB NES450T 400, 500, 600, 800 A8NES800T1 TA700NB NES500T TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CND41T33W CND41T3W 600 1NES600T Adjustable settings are: TA700NB NES700T 600, 800, 1000, 100 A1NES100T1 TA700NB NES800T TA1000NB NES900T TA1000NB NES1000T TA1000NB 100 1NES100T TA100NB1 V4-T-40 Volume 4 Circuit Protection CA E February 01

241 .3 100% Rated Type CHND Electronic Circuit Breakers with Non-Interchangeable Trip Units The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. Order as individual components: breaker frame, rating plug, terminals. 100% Rated Type CHND Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Two terminals are required per pole. For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Terminal ordered separate. Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 CHND800T33W CHND800T3W CHND800T35W CHND800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CHND1T33W CHND1T3W CHND1T35W CHND1T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Three-Pole 800 CHND3800T33W CHND3800T3W CHND3800T35W CHND3800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CHND31T33W CHND31T3W CHND31T35W CHND31T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-41

242 .3 100% Rated Type CHND Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Two terminals are required per pole. Neutral is in right pole. 3 For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Terminal ordered separate. Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole CHND4800T33W CHND4800T3W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, 800 TA700NB NES500T A8NES800T1 TA700NB NES600T TA700NB NES700T TA700NB NES800T TA1000NB1 100 CHND41T33W CHND41T3W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, 100 TA700NB NES800T A1NES100T1 TA1000NB NES900T TA1000NB NES1000T TA1000NB NES100T TA100NB1 V4-T-4 Volume 4 Circuit Protection CA E February 01

243 .3 100% Rated Type CNDC Electronic Circuit Breakers with Non-Interchangeable Trip Units The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at the 75 C ampacity. Order as individual components: breaker frame, rating plug, terminals. 100% Rated Type CNDC Electronic Circuit Breakers with Non-Interchangeable Trip Units Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere 1 Two terminals are required per pole. For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Terminal ordered separate. Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Two-Pole 800 CNDC800T33W CNDC800T3W CNDC800T35W CNDC800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, TA700NB NES500T 800 TA700NB NES600T A8NES800T1 TA700NB NES700T TA700NB NES800T TA1000NB1 100 CNDC1T33W CNDC1T3W CNDC1T35W CNDC1T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, TA700NB NES800T 100 TA1000NB NES900T A1NES100T1 TA1000NB NES1000T TA1000NB NES100T TA100NB1 Three-Pole 800 CNDC3800T33W CNDC3800T3W CNDC3800T35W CNDC3800T36W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, TA700NB NES500T 800 TA700NB NES600T A8NES800T1 TA700NB NES700T TA700NB NES800T TA1000NB1 100 CNDC31T33W CNDC31T3W CNDC31T35W CNDC31T36W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, TA700NB NES800T 100 TA1000NB NES900T A1NES100T1 TA1000NB NES1000T TA1000NB NES100T TA100NB1 Volume 4 Circuit Protection CA E February 01 V4-T-43

244 .3 100% Rated Type CNDC Electronic Circuit Breakers with Non-Interchangeable Trip Units, continued Digitrip RMS 310 Circuit Breaker Frame Only Digitrip RMS 310 Plug Only Adjustable Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac Plug Standard Options Maximum Continuous Ampere at 40 C Adjustable Short Time Pickup with I t Short Delay Ramp Independently Adjustable Short Time Pickup and Delay Adjustable Short Time Pickup with I t Short Delay and Ground Fault Protection 1 Two terminals are required per pole. Neutral is in right pole. 3 For 100A rating, includes conductor extension kit that increases breaker length 3.75 on each end. Independently Adjustable Short Time Pickup and Delay and Ground Fault Protection Ampere Fixed Plugs Adjustable Ampere s Standard Terminals Only 1 See Page V4-T-5 for Optional Terminals Four-Pole CNDC4800T33W CNDC4800T3W 400 8NES400T Adjustable TA700NB NES450T settings are: 400, 500, 600, TA700NB NES500T 800 TA700NB NES600T A8NES800T1 TA700NB NES700T TA700NB NES800T TA1000NB1 100 CNDC41T33W CNDC41T3W 600 1NES600T Adjustable TA700NB NES700T settings are: 600, 800, 1000, TA700NB NES800T 100 TA1000NB NES900T A1NES100T1 TA1000NB NES1000T TA1000NB NES100T TA1300NB1 V4-T-44 Volume 4 Circuit Protection CA E February 01

245 .3 Digitrip OPTIM Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac 800 ND3800T5W ND3800T56W ND3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ND31T5W ND31T56W ND31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 800 HND3800T5W HND3800T56W HND3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A HND31T5W HND31T56W HND31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Volume 4 Circuit Protection CA E February 01 V4-T-45

246 .3 Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Plugs, continued Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 800 NDC3800T5W NDC3800T56W NDC3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A NDC31T5W NDC31T56W NDC31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 V4-T-46 Volume 4 Circuit Protection CA E February 01

247 .3 Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only Maximum Continuous Ampere at 40 C L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch and one Form C bell (trip) alarm switch supplied with breaker as standard. 3 Factory sealed. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac 800 ND3800T106W ND3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ND31T106W ND31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 800 HND3800T106W HND3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A HND31T106W HND31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Three-Pole Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 800 NDC3800T106W NDC3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A NDC31T106W NDC31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Volume 4 Circuit Protection CA E February 01 V4-T-47

248 .3 100% Rated Digitrip OPTIM Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit), rating plug, terminals. 100% Rated Digitrip OPTIM 550 Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. 3 Includes conductor extension kit, which increases breaker length 3.75 on each end. Terminal ordered separate. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac 800 CND3800T5W CND3800T56W CND3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CND31T5W CND31T56W CND31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 800 CHND3800T5W CHND3800T56W CHND3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CHND31T5W CHND31T56W CHND31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 V4-T-48 Volume 4 Circuit Protection CA E February 01

249 .3 100% Rated Digitrip OPTIM 550 Circuit Breakers with Interchangeable Plugs, continued Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM 550 LSI LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. Zone interlocking, PowerNet, or both features can be added at the factory by adding suffixes ZG, PN or ZGP respectively to above catalog number. 3 Includes conductor extension kit, which increases breaker length 3.75 on each end. Terminal ordered separate. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 800 CNDC3800T5W CNDC3800T56W CNDC3800T57W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CNDC31T5W CNDC31T56W CNDC31T57W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Volume 4 Circuit Protection CA E February 01 V4-T-49

250 .3 100% Rated Digitrip OPTIM 1050 Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch one Form C bell (trip) alarm switch supplied with breaker as standard. 3 Factory sealed. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 50 kaic at 480 Vac 800 CND3800T106W CND3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CND31T106W CND31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Three-Pole High Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 800 CHND3800T106W CHND3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CHND31T106W CHND31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 V4-T-50 Volume 4 Circuit Protection CA E February 01

251 .3 100% Rated Digitrip OPTIM 1050 Circuit Breakers with Interchangeable Plugs, continued Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time (I t or I 4 t Response) 1 S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C OPTIM LSIG Type ND Molded Case Switches LSIA 1 Long delay I 4 t response selection limits short delay time to flat response. One Form C auxiliary switch one Form C bell (trip) alarm switch supplied with breaker as standard. 3 Factory sealed. 4 Includes conductor extension kit, which increases breaker length 3.75 on each end. Terminal ordered separate. 5 Neutral is in right pole. Molded case switch will trip above 14,000 amperes. For UL listed, series tested molded case switch application data, refer to Eaton. Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Ultra High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 800 CNDC3800T106W CNDC3800T107W 400 ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A ORPN80A CNDC31T106W 4 CNDC31T107W 600 ORPN1A ORPN1A ORPN1A ORPN1A ORPN1A10 Type ND High Instantaneous (K) Continuous Three-Pole Four-Pole 5 Ampere at 40 C 800 ND3800WK ND4800WK HND3800WK HND4800WK 100 ND31WK ND41WK HND31WK HND41WK Volume 4 Circuit Protection CA E February 01 V4-T-51

252 .3 Accessories Selection Guide and Ordering Information Line and Load Terminals Ordering Information N-Frame circuit breakers use Cu/AI terminals as standard. When optional copper or Cu/AI terminals are required, order by catalog number. Specify if factory installation is required. TA700NB1 TA1000NB1 TA100NB1 TA101NB1 T700NB1 T1000NB1 Line and Load Terminals Maximum Breaker Amperes 1 Terminal rating is AL9CU. Terminal rating is AL7CU. Terminal Body Material Wire Type AWG Wire Range/ No. Conductors Metric Wire Range mm Standard Cu/AI Pressure Terminals 700 Aluminum Cu/AI () kcmil TA700NB Aluminum Cu/AI (3) 3/0 400 kcmil TA1000NB Aluminum Cu/AI (4) 4/0 500 kcmil TA100NB Aluminum Cu/AI (3) kcmil TA101NB1 Optional Copper and Cu/AI Pressure Type Terminals 700 Copper Cu () /0 500 kcmil T700NB Copper Cu (3) 3/0 500 kcmil T1000NB1 100 Copper Cu (4) 3/0 400 kcmil T100NB3 V4-T-5 Volume 4 Circuit Protection CA E February 01

253 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. ND Frame Accessories Reference Three-Pole Four-Pole Description Page Left Center Right Left Center Right Neutral Internal Accessories (Only One Internal Accessory Per Pole) 1 Alarm lockout (Make/Break) V4-T-99 Alarm lockout (Make/Break) V4-T-99 Auxiliary switch (1A, 1B) V4-T-301 Auxiliary switch (A, B) V4-T-301 Auxiliary switch (3A, 3B) V4-T-301 Auxiliary switch (1A, 1B) and alarm switch combination V4-T-303 Auxiliary switch (A, B) and alarm switch combination V4-T-303 Shunt trip standard V4-T-307 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-315 Eaton PowerNet communications kit (OPTIM 550) V4-T-316 External Accessories Base mounting hardware V4-T-334 Interphase barriers V4-T-336 Terminal shield V4-T-336 Non-padlockable handle block V4-T-337 Padlockable handle lock hasp V4-T-338 Key interlock kit V4-T-339 Sliding bar interlock requires two breakers V4-T-340 Walking beam interlock requires two breakers V4-T-340 Electrical (motor) operator V4-T-34 Plug-in adapters V4-T-343 Rear connecting studs V4-T-344 Panelboard connecting straps V4-T-345 Handle mechanisms V4-T-347 Handle extension V4-T-351 Solid-state (electronic) portable test kit V4-T-353 OPTIM System Components Three Poles Ground fault alarm unit V4-T-35 Potential transformer module V4-T-35 Breaker interface module (BIM) V4-T-353 Digitrip OPTIMizer V4-T-353 Auxiliary power module V4-T-353 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application Legend Applicable in indicated pole position May be mounted on left or right pole not both Accessory available/modification available Note 1 OPTIM 550 and 1050 are factory sealed and do not have the right pole available for accessories. Volume 4 Circuit Protection CA E February 01 V4-T-53

254 .3 Technical Data and Specifications UL 489 Interrupting Capacity s 1 Circuit Breaker Type of Poles Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) ND, 3, CND, 3, HND, 3, CHND, 3, NDC, 3, CNDC, 3, NDU IEC 947- Interrupting Capacity s 1 Circuit Breaker Type of Poles Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) ND I cu, 3, I cs, 3, CND I cu, 3, I cs, 3, HND I cu, 3, I cs, 3, CHND I cu, 3, I cs, 3, NDC I cu, 3, I cs, 3, CNDC I cu, 3, I cs, 3, Utilization Category A circuit breakers. 100% rated breakers amperes maximum rating. 4 Successfully tested at 300 kaic, although UL recognizes maximum of 00 kaic at 40 Vac. 5 Successfully tested at 75 kaic, although UL recognizes maximum of 65 kaic at 600 Vac. V4-T-54 Volume 4 Circuit Protection CA E February 01

255 .3 N-Frame Digitrip Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 rms sensing Yes Yes Yes Yes Breaker Type Frame N N N N Ampere range 400A 100A 400A 100A 400A 100A 400A 100A Interrupting rating at 480 volts 50, 65, 100 (ka) 50, 65, 100 (ka) 50, 65, 100 (ka) 50, 65, 100 (ka) Protection Ordering options LS, LSG LSI, LSIG LSI, LSIG, LSI(A) LSI(A), LISG Fixed rated plug (I n ) Yes Yes Yes Yes Overtemperature trip Yes Yes Yes Yes Long Delay Protection (L) Adjustable rating plug (I n ) Yes Yes No No Long delay pickup (I n ) (I n ) x (I n ) x (I n ) Long delay time I t 1 seconds 1 seconds 4 seconds 4 seconds Long delay time I 4 t No No 1 5 Seconds 1 5 Seconds Long delay thermal memory Yes Yes Yes Yes High load alarm No No No x I r Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) % x (I r ) % x (I r ) Short delay time I t 100 ms No ms ms Short delay time flat No Inst 300 ms ms ms Short delay time zone selective interlocking No No Yes Yes Instantaneous Protection (I) Instantaneous pickup No % x (I n ) % x (I n ) % x (I n ) Discriminator No No Yes Yes Instantaneous override Yes Yes Yes Yes Ground Fault Protection (G) Ground fault alarm No No 0 100% x (I s ) 0 100% x (I s ) Ground fault pickup Varies by frame Varies by frame 0 100% x (I s ) 0 100% x (I s ) Ground fault delay I t No No ms ms Ground fault delay flat Inst 500 ms Inst 500 ms ms ms Ground fault zone selective interlocking No No Yes 3 Yes Ground fault thermal memory Yes Yes Yes Yes System Diagnostics Status LEDs Yes Yes Yes Yes Cause of trip LEDs No No Yes Yes Magnitude of trip information No No Yes Yes Remote signal contact ground alarm Yes 4 Yes 4 Yes 3 Yes Local auxiliary and bell alarm contact Optional Optional Optional Included Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 Adjust by rating plug. By OPTIMizer/BIM. 3 Zone interlock kit. 4 With separate ground fault alarm unit (GFAU). Volume 4 Circuit Protection CA E February 01 V4-T-55

256 .3 N-Frame Digitrip, continued Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 System Monitoring Digital display No No Yes 1 Yes 1 Current No No Yes Yes Power and energy No No No Yes Power quality harmonics No No No Yes Power factor No No No Yes Communications Eaton PowerNet No No No Yes Testing Testing method Test set Test set OPTIMizer, BIM, PowerNet Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting 1 By OPTIMizer/BIM. Eaton s PowerNet kit. OPTIMizer, BIM, PowerNet V4-T-56 Volume 4 Circuit Protection CA E February 01

257 .3 Dimensions and Weights Approximate Dimensions in Inches (mm) ND Frame of Poles Width Height Depth, (09.6) (406.4) 5.50 (139.7) (8.6) (406.4) 5.50 (139.7) ND-Frame, Two- and Three-Pole 1.91 (48.4) 3.68 (93.) 1.50 (38.1) Front Cover Cutout 3.44 (87.3) 1.7 (43.6) C L Handle 3.19 (80.9) 6.38 (161.9) 0.5 R (6.4 R) C L Handle 0.19 R (4.8 R) Approximate Shipping Weight in Lbs (kg) ND Frame Complete Breaker Breaker Type Two-Pole Three-Pole Four-Pole ND, HND, NDC, NDU 37 (16.8) 45 (0.4) 58 (6.3) Front View (406.4) ON/I OFF/O 8.5 (09.6) Side View 5.50 (139.7) Volume 4 Circuit Protection CA E February 01 V4-T-57

258 .3 Typical R-Frame Breaker Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Selection Product Selection Accessories Technical Data and Specifications Dimensions and Weights Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-59 V4-T-60 V4-T-77 V4-T-78 V4-T-81 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-37 R-Frame ( Amperes) Product Description Eaton R-Frame circuit breakers are available as frame (which includes trip unit), rating plug and terminals All R-Frame circuit breakers are suitable for reverse feed use V4-T-58 Volume 4 Circuit Protection CA E February 01

259 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Circuit Breaker/Frame Circuit Breaker/ Frame Type RD RDC CRD CRDC 1 For complete list of available trip types, refer to Pages V4-T-60 to V4-T-74. No four-pole for CRD and CRDC. of Poles 3 = 3 poles 4 = 4 poles Circuit Breaker/Frame Ampere 16 = 1600 amperes 0 = 000 amperes 5 = 500 amperes RD 3 16 T3 W Trip Type 1 T3 = Digitrip RMS 310 LSI T53 = Digitrip RMS 510 LS T65 = Digitrip RMS 610 LSG T86 = Digitrip RMS 810 LSIG T96 = Digitrip RMS 910 LSIG T106 = Digitrip OPTIM 1050 LSIG T107 = Digitrip OPTIM 1050 LSIA Suffix W = Without terminals P = 100% protected neutral pole R = Ground fault remote (310 only) K = Molded case switch Volume 4 Circuit Protection CA E February 01 V4-T-59

260 .3 Product Selection Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only Digitrip RMS 310 Plug Only L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) Maximum I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (Flat Response) Ampere Fixed LS LSI LSG 1 LSIG 1 Ampere Plug at 40 C 1 Add R to catalog number for ground fault remote indication compatibility, i.e., RD316T35RW. For SCR application, use 000 ampere frame. Adjustable Plug Adjustable Ampere s Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T33W RD316T3W RD316T35W RD316T36W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T 000 RD30T33W RD30T3W RD30T35W RD30T36W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T 500 RD35T33W RD35T3W RD35T35W RD35T36W 100 5RES1T Adjustable settings are: 150 5RES15T 100, 1600, 000, 500 A5RES5T RES16T 000 5RES0T 500 5RES5T V4-T-60 Volume 4 Circuit Protection CA E February 01

261 .3 Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs, continued Circuit Breaker Frame Only Digitrip RMS 310 Plug Only L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) Maximum I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (Flat Response) Ampere Fixed LS LSI LSG 1 LSIG 1 Ampere Plug at 40 C 1 Add R to catalog number for ground fault remote indication compatibility, i.e., RD316T35RW. Unprotected right pole neutral. Add P to catalog number for 100% protected right pole neutral, i.e., RD416T33PW. 3 For SCR application, use 000 ampere frame. Adjustable Plug Adjustable Ampere s Four-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac RD416T33W RD416T3W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T 000 RD40T33W RD40T3W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T 500 RD45T33W RD45T3W 100 5RES1T Adjustable settings are: 150 5RES15T 100, 1600, 000, 500 A5RES5T RES16T 000 5RES0T 500 5RES5T Volume 4 Circuit Protection CA E February 01 V4-T-61

262 .3 Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) Maximum I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (Flat Response) Ampere LS LSI LSG 1 LSIG 1 at 40 C 1 Add R to catalog number for ground fault remote indication compatibility, i.e., RDC316T35RW. For SCR application, use 000 ampere frame. Digitrip RMS 310 Plug Only Adjustable Plug Ampere Fixed Plug Adjustable Ampere s Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T33W RDC316T3W RDC316T35W RDC316T36W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T 000 RDC30T33W RDC30T3W RDC30T35W RDC30T36W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T 500 RDC35T33W RDC35T3W RDC35T35W RDC35T36W 100 5RES1T Adjustable settings are: 150 5RES15T 100, 1600, 000, 500 A5RES5T RES16T 000 5RES0T 500 5RES5T V4-T-6 Volume 4 Circuit Protection CA E February 01

263 .3 Digitrip RMS 310 Electronic Circuit Breakers with Interchangeable Plugs, continued Circuit Breaker Frame Only Digitrip RMS 310 Plug Only L Adjustable Long Delay Pickup (By Adjustable Plug) Adjustable Plug S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) Maximum I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (Flat Response) Ampere Fixed Adjustable LS LSI LSG 1 LSIG 1 Ampere Plug Ampere s at 40 C Four-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac RDC416T33W RDC416T3W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T 000 RDC40T33W RDC40T3W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T 500 RDC45T33W RDC45T3W 100 5RES1T Adjustable settings are: 150 5RES15T 100, 1600, 000, 500 A5RES5T RES16T 000 5RES0T 1 Add R to catalog number for ground fault remote indication compatibility, i.e., RDC316T35RW. Unprotected right pole neutral. Add P to catalog number for 100% protected right pole neutral, i.e., RDC416T33PW. 3 For SCR application use 000 ampere frame RES5T Volume 4 Circuit Protection CA E February 01 V4-T-63

264 .3 100% Rated Digitrip RMS 310 Electronic Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at 75 C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated Digitrip RMS 310 Electronic Circuit Breakers Circuit Breaker Frame Only L Adjustable Long Delay Pickup (By Adjustable Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I t Response) or Adjustable Short Delay Time (Flat Response) Maximum I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time (Flat Response) Ampere LS LSI LSG 1 LSIG 1 at 40 C 1 Add R to catalog number for ground fault remote indication compatibility, i.e., CRD316T35RW. For SCR application use 000 ampere frame. 3 Includes B016RDL rear connectors. Digitrip RMS 310 Plug Only Adjustable Plug Ampere Fixed Plug Adjustable Ampere s Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T33W CRD316T3W CRD316T35W CRD316T36W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T CRD30T33W CRD30T3W CRD30T35W CRD30T36W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T33W CRDC316T3W CRDC316T35W CRDC316T36W RES08T Adjustable settings are: RES10T 800, 1000, 100, 1600 A16RES16T RES1T RES15T RES14T RES15T RES16T CRDC30T33W CRDC30T3W CRDC30T35W CRDC30T36W RES10T Adjustable settings are: 100 0RES1T 1000, 100, 1600, 000 A0RES0T RES15T RES14T RES16T 000 0RES0T V4-T-64 Volume 4 Circuit Protection CA E February 01

265 .3 Digitrip RMS 510 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 510 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T51W RD316T53W RD316T5W RD316T54W RD316T55W RD316T56W 800 RP6R16A RP6R16A RP6R16A RP6R16A RD30T51W RD30T53W RD30T5W RD30T54W RD30T55W RD30T56W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RD35T51W RD35T53W RD35T5W RD35T54W RD35T55W RD35T56W 1600 RP6R5A RP6R5A RP6R5A50 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T51W RDC316T53W RDC316T5W RDC316T54W RDC316T55W RDC316T56W 800 RP6R16A RP6R16A RP6R16A RP6R16A RDC30T51W RDC30T53W RDC30T5W RDC30T54W RDC30T55W RDC30T56W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RDC35T51W RDC35T53W RDC35T5W RDC35T54W RDC35T55W RDC35T56W 1600 RP6R5A RP6R5A RP6R5A50 Volume 4 Circuit Protection CA E February 01 V4-T-65

266 .3 100% Rated Digitrip RMS 510 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at 75 C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated Digitrip RMS 510 Circuit Breakers Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Note 1 Includes B016RDL rear connectors. Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T51W CRD316T53W CRD316T5W CRD316T54W CRD316T55W CRD316T56W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRD30T51W CRD30T53W CRD30T5W CRD30T54W CRD30T55W CRD30T56W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T53W CRDC316T5W CRDC316T54W CRDC316T55W CRDC316T56W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRDC30T51W CRDC30T53W CRDC30T5W CRDC30T54W CRDC30T55W CRDC30T56W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 V4-T-66 Volume 4 Circuit Protection CA E February 01

267 .3 Digitrip RMS 610 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 610 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T61W RD316T63W RD316T6W RD316T64W RD316T65W RD316T66W 800 RP6R16A RP6R16A RP6R16A RP6R16A RD30T61W RD30T63W RD30T6W RD30T64W RD30T65W RD30T66W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RD35T61W RD35T63W RD35T6W RD35T64W RD35T65W RD35T66W 1600 RP6R5A RP6R5A RP6R5A50 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T61W RDC316T63W RDC316T6W RDC316T64W RDC316T65W RDC316T66W 800 RP6R16A RP6R16A RP6R16A RP6R16A RDC30T61W RDC30T63W RDC30T6W RDC30T64W RDC30T65W RDC30T66W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RDC35T61W RDC35T63W RDC35T6W RDC35T64W RDC35T65W RDC35T66W 1600 RP6R5A RP6R5A RP6R5A50 Volume 4 Circuit Protection CA E February 01 V4-T-67

268 .3 100% Rated Digitrip RMS 610 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at 75 C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated Digitrip RMS 610 Circuit Breakers Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Note 1 Includes B016RDL rear connectors. Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T61W CRD316T63W CRD316T6W CRD316T64W CRD316T65W CRD316T66W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRD30T61W CRD30T63W CRD30T6W CRD30T64W CRD30T65W CRD30T66W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T61W CRDC316T63W CRDC316T6W CRDC316T64W CRDC316T65W CRDC316T66W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRDC30T61W CRDC30T63W CRDC30T6W CRDC30T64W CRDC30T65W CRDC30T66W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 V4-T-68 Volume 4 Circuit Protection CA E February 01

269 .3 Digitrip RMS 810 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 810 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T81W RD316T83W RD316T8W RD316T84W RD316T85W RD316T86W 800 RP6R16A RP6R16A RP6R16A RP6R16A RD30T81W RD30T83W RD30T8W RD30T84W RD30T85W RD30T86W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RD35T81W RD35T83W RD35T8W RD35T84W RD35T85W RD35T86W 1600 RP6R5A RP6R5A RP6R5A50 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T81W RDC316T83W RDC316T8W RDC316T84W RDC316T85W RDC316T86W 800 RP6R16A RP6R16A RP6R16A RP6R16A RDC30T81W RDC30T83W RDC30T8W RDC30T84W RDC30T85W RDC30T86W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RDC35T81W RDC35T83W RDC35T8W RDC35T84W RDC35T85W RDC35T86W 1600 RP6R5A RP6R5A RP6R5A50 Volume 4 Circuit Protection CA E February 01 V4-T-69

270 .3 100% Rated Digitrip RMS 810 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at 75 C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated Digitrip RMS 810 Circuit Breakers Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Note 1 Includes B016RDL rear connectors. Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T81W CRD316T83W CRD316T8W CRD316T84W CRD316T85W CRD316T86W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRD30T81W CRD30T83W CRD30T8W CRD30T84W CRD30T85W CRD30T86W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T81W CRDC316T83W CRDC316T8W CRDC316T84W CRDC316T85W CRDC316T86W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRDC30T81W CRDC30T83W CRDC30T8W CRDC30T84W CRDC30T85W CRDC30T86W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 V4-T-70 Volume 4 Circuit Protection CA E February 01

271 .3 Digitrip RMS 910 Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip RMS 910 Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T91W RD316T93W RD316T9W RD316T94W RD316T95W RD316T96W 800 RP6R16A RP6R16A RP6R16A RP6R16A RD30T91W RD30T93W RD30T9W RD30T94W RD30T95W RD30T96W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RD35T91W RD35T93W RD35T9W RD35T94W RD35T95W RD35T96W 1600 RP6R5A RP6R5A RP6R5A50 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T91W RDC316T93W RDC316T9W RDC316T94W RDC316T95W RDC316T96W 800 RP6R16A RP6R16A RP6R16A RP6R16A RDC30T91W RDC30T93W RDC30T9W RDC30T94W RDC30T95W RDC30T96W 1000 RP6R0A RP6R0A RP6R0A RP6R0A RDC35T91W RDC35T93W RDC35T9W RDC35T94W RDC35T95W RDC35T96W 1600 RP6R5A RP6R5A RP6R5A50 Volume 4 Circuit Protection CA E February 01 V4-T-71

272 .3 100% Rated Digitrip RMS 910 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 C wire is applied at 75 C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated Digitrip RMS 910 Circuit Breakers Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) Maximum I Adjustable Instantaneous Pickup Continuous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) Ampere LI LS LSI LIG LSG LSIG at 40 C Note 1 Includes B016RDL rear connectors. Digitrip Plug Only Rated Current (I n ) Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T91W CRD316T93W CRD316T9W CRD316T94W CRD316T95W CRD316T96W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRD30T91W CRD30T93W CRD30T9W CRD30T94W CRD30T95W CRD30T96W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T91W CRDC316T93W CRDC316T9W CRDC316T94W CRDC316T95W CRDC316T96W 800 RP6R16A RP6R16A RP6R16A RP6R16A CRDC30T91W CRDC30T93W CRDC30T9W CRDC30T94W CRDC30T95W CRDC30T96W 1000 RP6R0A RP6R0A RP6R0A RP6R0A00 V4-T-7 Volume 4 Circuit Protection CA E February 01

273 .3 Digitrip OPTIM Electronic Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. Digitrip OPTIM Electronic Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C LSIA 1050 LSIG 1050 Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 RD316T107W RD316T106W 800 ORPR16A ORPR16A ORPR16A ORPR16A RD30T107W RD30T106W 1000 ORPR0A ORPR0A ORPR0A ORPR0A RD35T107W RD35T106W 1600 ORPR5A ORPR5A ORPR5A50 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 RDC316T107W RDC316T106W 800 ORPR16A ORPR16A ORPR16A ORPR16A RDC30T107W RDC30T106W 1000 ORPR0A ORPR0A ORPR0A ORPR0A RDC35T107W RDC35T106W 1600 ORPR5A ORPR5A ORPR5A50 Volume 4 Circuit Protection CA E February 01 V4-T-73

274 .3 100% Rated 600 Volts AC Digitrip OPTIM Circuit Breakers with Interchangeable Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug. 100% Rated 600 Volts AC Digitrip OPTIM Circuit Breakers with Interchangeable Plugs Circuit Breaker Frame Only L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I t or Flat Response) A Adjustable Ground Fault Alarm with Adjustable Ground Fault Time Delay (I t or Flat Response) Maximum Continuous Ampere at 40 C Molded Case Switches Refer to Eaton for UL listed, series tested Molded Case Switch application data. LSIA 1050 LSIG 1050 Digitrip OPTIM Plug Only Ampere Fixed Plug Three-Pole Standard Interrupting Capacity 600 Vac Rated 65 kaic at 480 Vac 1600 CRD316T107W CRD316T106W 800 ORPR16A ORPR16A ORPR16A ORPR16A CRD30T107W CRD30T106W 1000 ORPR0A ORPR0A ORPR0A ORPR0A00 Three-Pole High Interrupting Capacity 600 Vac Rated 100 kaic at 480 Vac 1600 CRDC316T107W CRDC316T106W 800 ORPR16A ORPR16A ORPR16A ORPR16A CRDC30T107W CRDC30T106W 1000 ORPR0A ORPR0A ORPR0A ORPR0A00 Type RD High Instantaneous (K) Complete without Terminals Continuous Ampere Three-Pole Four-Pole at 40 C 1600 RD316WK RD416WK 000 RD30WK RD40WK 1 Includes B016RDL rear connectors. Molded case switch may trip above 17,500 amperes. V4-T-74 Volume 4 Circuit Protection CA E February 01

275 .3 Accessories Selection Guide and Ordering Information Line and Load Terminals Line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA C. No. 65M. Unless otherwise specified, R-Frame circuit breaker line load terminals are shipped separately for field installation. Line and Load Terminals Maximum Breaker Amperes Terminal Body Material Wire Type Ordering Information R-Frame circuit breakers have Cu/AI terminals as standard and Cu only terminals as an option. Specify if factory installation is required. Hardware AWG/kcmil Wire Range/ No. Conductors Metric Wire Range mm Wire Terminals 1600 Aluminum Cu/AI English (4) TA1600RD 1600 Copper Cu English (4) T1600RD 000 Aluminum Cu/AI English 600 (6) TA000RD 1 Rear Connectors 000 Copper English B016RD 000 Copper English B016RDL 500 Copper English B500RD 3 1 includes bus connection, terminals and hardware for either line side or load side of three-pole breaker. For use with 100% rated 1600A and 000A frame. Do not order separately unless for replacement purposes. Included in breaker carton when 100% rated device is ordered. 3 For use with 500A frame. Do not order separately unless for replacement purposes. Included in breaker carton when 500A breaker is ordered. Volume 4 Circuit Protection CA E February 01 V4-T-75

276 V4-T-76 Volume 4 Circuit Protection CA E February 01 Mounting Hardware Breaker Line/Load Conductors TA000RD

277 .3 Accessories Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. RD Frame Accessories Description Legend Applicable in indicated pole position Accessory available/modification available 1 All accessories mount in the RH cavity which will accept one each shunt trip, UVR, auxiliary switch and alarm switch. Mounts outside breaker. 3 Included with breaker. Reference Page Three-Pole Four-Pole Left Center Right Left Center Right Neu. Internal Accessories 1 Alarm lockout (Make/Break) V4-T-99 Alarm lockout (Make/Break) V4-T-99 Auxiliary switch (A, B) V4-T-99 Auxiliary switch (4A, 4B) V4-T-99 Shunt trip standard V4-T-307 Shunt trip low energy V4-T-308 Undervoltage release mechanism V4-T-315 Accessory terminal block V4-T-316 External Accessories Base mounting hardware V4-T-334 Padlockable handle lock hasp V4-T-337 Key interlock kit V4-T-339 Walking beam interlock V4-T-340 Electrical (motor) operator V4-T-34 Drawout cassette V4-T-335 Handle mechanisms V4-T-347 Handle extension 3 V4-T-351 Solid-state (electronic) portable test kit (310 only) V4-T-35 OPTIM System Components Breaker interface module (BIM) V4-T-353 Digitrip OPTIMizer V4-T-353 Auxiliary power module V4-T-353 Modifications (Refer to Eaton) Special calibration Moisture fungus treatment V4-T-11 Freeze-tested circuit breakers Marine/naval application Volume 4 Circuit Protection CA E February 01 V4-T-77

278 .3 Technical Data and Specifications UL 489/CSA Interrupting Capacity s 1 Circuit Breaker Type of Poles IEC 947- Interrupting Capacity s 1 1 Utilization Category A circuit breakers. 100% rated breakers. See Page V4-T-79 for Trip Unit Specifications. Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) RD 3, CRD RDC 3, CRDC Circuit Breaker Type of Poles Interrupting Capacity (ka Symmetrical Amperes) Volts AC (50/60 Hz) RD I cu 3, I cs 3, RDC I cu 3, I cs 3, V4-T-78 Volume 4 Circuit Protection CA E February 01

279 .3 Specifications R-Frame Digitrip Trip Unit Type Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting x I n 1 Adjust by rating plug. Except 500 ampere frame is %. 3 Varies by frame. 4 LS/LSG only. 5 Not to exceed 100 amperes. Digitrip RMS 310 Digitrip RMS 510 Digitrip RMS 610 Digitrip RMS 810 Digitrip RMS 910 Digitrip OPTIM 1050 rms sensing Yes Yes Yes Yes Yes Yes Yes Breaker Type Frame R R R R R R R Ampere range A A A A A A A Interrupting rating at 480 volts 65, 100 (ka) 65, 100 (ka) 65, 100 (ka) 65, 100 (ka) 65, 100 (ka) 65, 100 (ka) 65, 100 (ka) Protection Ordering options LS, LSG LSI, LSIG LI, LS, LSI, LIG, LI, LS, LSI, LIG, LI, LS, LSI, LIG, LI, LS, LSI, LIG, LSI(A), LISG LSG, LSIG LSG, LSIG LSG, LSIG LSG, LSIG Fixed rated plug (I n ) Yes Yes Yes Yes Yes Yes Yes Overtemperature trip Yes Yes Yes Yes Yes Yes Yes Long Delay Protection (L) Adjustable rating plug (I n ) Yes Yes No No No No No Long delay pickup (I n ) (I n ) x (I n ) x (I n ) x (I n ) x (I n ) x (I n ) Long delay time I t 1 seconds 1 seconds 4 seconds 4 seconds 4 seconds 4 seconds 4 seconds Long delay time I 4 t No No No No No No 1 5 Seconds Long delay thermal memory Yes Yes Yes Yes Yes Yes Yes High load alarm No No No 0.85 x I r 0.85 x I r 0.85 x I r x I r Short Delay Protection (S) Short delay pickup % x (I n ) % x (I n ) % S1and S x (I r ) % S1and S x (I r ) % S1andS x (I r ) % S1and S x (I r ) % x (I r ) 3 Short delay time I t 100 ms No ms ms ms ms ms Short delay time flat No Inst 300 ms ms ms ms ms ms Short delay time zone selective No No Yes Yes Yes Yes Yes interlocking Instantaneous Protection (I) Instantaneous pickup No % % % % % % x (I n ) 3 x (I n ) M1and M x (I n ) M1and M x (I n ) M1and M x (I n ) M1and M x (I n ) Discriminator No No Yes 4 Yes 4 Yes 4 Yes 4 Yes Instantaneous override Yes Yes Yes Yes Yes Yes Yes Ground Fault Protection (G) Ground fault alarm 5 No No No No No No 5 100% x (I n ) Ground fault pickup A A 5 100% x (I s ) 5-100% x (I s ) 5 100% x (I s ) 5 100% x (I s ) 5 100% x (I n ) Ground fault delay I t No No ms ms ms ms ms Ground fault delay flat Inst 500 ms Inst 500 ms ms ms ms ms ms Ground fault zone selective interlocking No No Yes Yes Yes Yes Yes Ground fault thermal memory Yes Yes Yes Yes Yes Yes Yes Volume 4 Circuit Protection CA E February 01 V4-T-79

280 .3 R-Frame Digitrip, continued Trip Unit Type Digitrip RMS 310 Legend BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor I n = Plug I r = Long Delay Pickup Setting x I n 1 Optional. Add suffix R to catalog number. By OPTIMizer/BIM. Digitrip RMS 510 Digitrip RMS 610 Digitrip RMS 810 Digitrip RMS 910 Digitrip OPTIM 1050 System Diagnostics Status LEDs Yes Yes Yes Yes Yes Yes Yes Cause of trip LEDs No No Yes Yes Yes Yes Yes Magnitude of trip information No No No Yes Yes Yes Yes Remote signal contacts Yes 1 Yes 1 No Yes Yes Yes Yes System Monitoring Digital display No No No Yes Yes Yes Yes Current No No No Yes Yes Yes Yes Voltage No No No No No Yes No Power and energy No No No No Yes Yes Yes Power quality harmonics No No No No No Yes Yes Power factor No No No No Yes (over Yes Yes Eaton PowerNet only) Communications Eaton PowerNet No No No No Yes Yes Yes Testing Testing method Test set Test set Integral Integral Integral Integral OPTIMizer, BIM, PowerNet V4-T-80 Volume 4 Circuit Protection CA E February 01

281 Push To Trip.3 Dimensions and Weights Dimensions in Inches (mm) RD Frame of Poles Width Height Depth (393.7) (406.4) 9.75 (47.7) (508.0) (406.4) 9.75 (47.7) RD-Frame, Three-Pole, 1600 and 000 Amperes 5.09 (19.4) 9.69 (46.1) 7.5 (184.) CL Handle (368.3) CL Breaker (0.4) Dia. (4 Holes) Use 4, 0.38 (Mil) Dia. Bolts for Mounting Breaker 7.75 (196.9) (381.0) Front View (393.7) Side View 9.00 (8.6) (406.4) 6.65 (166.7) 1.91 (37.8) 0.16 (4.0) R Typ. Approximate Shipping Weight in Lbs (kg) RD Frame Complete Breaker Breaker Type Three-Pole Four-Pole 1600 Amperes RD, CRD 1, RDC, CRDC 1 10 (46.3) 135 (61.) 000 Amperes RD, RDC 10 (46.3) 135 (61.) CRD, CRDC 130 (59.0) 175 (79.4) 500 Amperes RD, RDC 135 (61.) 18 (8.6) Note 1 No four-pole for CRD and CRDC. Volume 4 Circuit Protection CA E February 01 V4-T-81

282 .3 Motor Circuit Protectors Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Selection Product Selection Accessories Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-83 V4-T-84 V4-T-85 V4-T-89 V4-T-91 V4-T-96 V4-T-37 Motor Circuit Protectors (MCP) Product Description Designated as Eaton s Types GMCP and HMCP, the instantaneous-only motor circuit protector (MCP) is available in ratings from 3A to 100A for motor starter sizes 0 through 8. An innovative design of internal components allows higher MCP-starter combination interrupting ratings. The MCP is marked to permit proper electrical application within the assigned equipment ratings. Standards and Certifications The MCP is designed to comply with the applicable requirements of Underwriters Laboratories Standard UL 489, Canadian Standards Association Standard C. No. 5.1, and International Electrotechnical Commission Recommendations IEC The MCP is a recognized component (UL File E7819) and complies with the applicable requirements of Underwriters Laboratories Standard UL 489. It is also designed to comply with the applicable requirements of Canadian Standards Association Standard C. No. 5.1, International Electrotechnical Commission Recommendations IEC 157-1, and nameplates bear the CE marking. Note: Interrupting ratings are dependent on starter it is used with. V4-T-8 Volume 4 Circuit Protection CA E February 01

283 .3 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. Motor Circuit Protector Motor Circuit Protector Note Motor Circuit Protective Type HMCP = 3 poles HMP = poles 1 HMCPS = 3 poles 1 On J- and K-Frame HMCPs only. Motor Circuit Protective Device GMCP =3 poles Continuous Ampere Continuous Ampere HMCP 003 A0 C Magnetic Trip Range/ NEMA Starter Size A0 = 9 30/0 C0 = 1 70/0 E0 = /0 D0 = 40 60/0 H1 = /1 G = 80 10/ K = / J = / M = / L3 = /3 R3 = /3 T4 = /4 U4 = /4 A5 = /5 C5 = /5 D5 = /5 F5 = /5 G5 = /5 J5 = /5 K5 = /5 L5 = /5 W5 = /5 N5 = /5 R5 = /5 X5 = /5 Y5 = /5 L6 = /6 (electronic) X6 = /6 (electronic) Y6 = /6 (electronic) X7 = /7 (electronic) Y8 = /8 (electronic) GMCP 003 A0 C Magnetic Trip Range/NEMA Starter Size A0 = 15 30/0 C0 = 35 70/0 E0 = /0 H1 = /1 K = / J = / M = / Suffix C = Non-aluminum terminals W = Without terminals X = Load terminals only Y = Line terminals only S = Stainless steel terminals (150A frame only) No Suffix: Standard terminals on line and load Suffix C = Non-aluminum terminals Volume 4 Circuit Protection CA E February 01 V4-T-83

284 .3 Product Selection G-Frame 480 Vac Maximum, 600Y/347 Vac NEMA Starter Size Continuous Amperes Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP 0 3 A GMCP003A0C B C D E.0. 7 F A GMCP007C0C B C D E F A GMCP015E0C B C D E F A GMCP030H1C B C D E F A GMCP050KC B C D E F A GMCP060JC B C D E F A GMCP063MC B D E F Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used. All GMCP 3 63A come with line and load steel body terminals for Cu only wire. Refer to Page V4-T-18 under Optional Terminal Types. UL recognized and CSA approved. V4-T-84 Volume 4 Circuit Protection CA E February 01

285 .3 Accessories Modifications for GMCP Internal accessories must be factory installed. Internal Accessories 1 Type Accessory External Mounted Accessories Units Description in Package Vari-Depth Handle Mechanism 5 Modifications for HMCP See Internal Accessories starting on Page V4-T Only one accessory may be installed in GMCP. LH only. 3 RH only. 4 For use with standard 35 mm DIN rail such as, 35 x 7.5 or 15 mm per DIN EN For use with GMCP only. No UVR available on GMCP. Electrical s Volts Frequency Amperes Contact Arrangement Factory Suffix Style Shunt trip 10 50/60 Hz 1.1 S5 1373D6G18 Shunt trip 40 50/60 Hz.1 S6 1373D6G19 Auxiliary switch /60 Hz 6.0 1A/1B A3 188C74G03 Auxiliary switch /60 Hz 6.0 A/B A6 188C73G03 Alarm switch /60 Hz 6.0 Make/Break B3 188C75G03 Auxiliary switch/alarm switch combination /60 Hz 6.0 1A/1B Make/Break B13 188C76G09 Style Lock dog (non-padlockable) 1 194C01H01 Mounting hardware 1 64B375G3 DIN rail adapter C79G0 Description For Type 1 use For Type 3R, 4X, 1 use Close coupled black with gray handle Close coupled red with yellow handle HRGMV11L HRGMV14L HRGMC10 HRGMC30 Volume 4 Circuit Protection CA E February 01 V4-T-85

286 .3 F-Frame 600 Vac Maximum, 50 Vdc Maximum 600 Vac Maximum, 50 Vdc Maximum, continued NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP 0 3 A HMCP003A0C B C D E F G.0. 7 H A HMCP007C0C B C D E F G H A HMCP015E0C B C D E F G H A HMCP030H1C B C D E F G H A HMCP050KC B C D E F G H NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP 70 A HMCP070MC B C D E F G H A HMCP100R3C B C D E F G H A HMCP150T4C B C D D E F G H A HMCP150U4C B C D E F G 3 50 H Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used. For DC applications, actual trip levels are approximately 40% higher than values shown. 3 Settings above 130 amperes are for special applications. NEC Article (a) requires the ampere rating of the disconnecting means to be not less than 115% of the motor full load ampere rating. HMCP 3 100A come with line and load steel body terminals, 3T100FB. HMCP 150A come with line and load steel body terminals, 3T150FB. V4-T-86 Volume 4 Circuit Protection CA E February 01

287 .3 Special Low Magnetic Protection Application MCP 600 Vac Maximum, 50 Vdc Maximum Cont. Amps Cam Setting MCP Trip Setting 1 MCP 5 A 40 HMCP05D0C B 43 D 49 E 5 F 55 G 58 H A 80 HMCP050GC B 87 C 93 D 98 E 103 F 109 G 115 H A 115 HMCP070JC B 1 C 130 D 139 E 145 F 153 G 160 H A 160 HMCP100L3C B 174 C 185 D 196 E 07 F 18 G 9 H 40 1 For DC applications, actual trip levels are approximately 40% higher than values shown. HMCP 5 100A come with line and load steel body terminals, 3T100FB. Volume 4 Circuit Protection CA E February 01 V4-T-87

288 .3 MCPs for Application with Motor Starters Equipped with Electronic Overload Relays 600 Vac Maximum, 50 Vdc Maximum 600 Vac Maximum, 50 Vdc Maximum, continued NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP 0 3 A HMCPS003A0C B C D E F G.0. 7 H A HMCPS007C0C B C D E F G H A HMCPS015E0C B C D E F G H A HMCPS030H1C B C D E F G H A HMCPS050KC B C D E F G H NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCPS100R3C B C D E F G H A HMCPS150T4C B C D E F G H A HMCPS150U4C B C D E F G 3 50 H Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. For DC applications, actual trip levels are approximately 40% higher than values shown. 3 Settings above 130 amperes are for special applications. NEC Article (a) requires the ampere rating of the disconnecting means to be not less than 115% of the motor full load ampere rating. HMCP 5 100A come with line and load steel body terminals, 3T100FB. HMCPS 3 100A come with line and load steel body terminals, 3T100FB. HMCPS 150A come with line and load steel body terminals, 3T150FB. V4-T-88 Volume 4 Circuit Protection CA E February 01

289 .3 Motor Protection Circuit Breakers Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Product Selection Technical Data and Specifications Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-90 V4-T-90 V4-T-91 V4-T-96 V4-T-37 Motor Protection Circuit Breakers (MPCB) Product Description Motor protection circuit breakers (MPCBs) provide UL 489 branch circuit protection, UL 508 and CSA C. No. 14 motor protection, and meet IEC and requirements. Typical branch motor loads are protected by three-component starters, consisting of breaker, contactor and overload relay, or fuse, contactor and overload relay. The MPCB application-specific protection eliminates the need for motor overload relay found in the traditional three-component starter assembly. The branch motor load protection is simplified to an MPCB and contactor, reducing both space requirements and heat generation in customer panels. Protection is provided by application-specific electronic trip units. The electronic trip unit provides typical motor overload relay functionality and short-circuit protection against potential phase-tophase or phase-to-ground faults. Disconnecting means Branch circuit short-circuit protection Overload protection Class 5, 10, 15 and 0 Phase unbalance protection FDMP breaker trips when there is a 40% difference between any phase compared to the calculated three-phase average Phase loss protection Active when the maximum phase current is greater than 50% of FLA setting Breaker will trip when minimum phase current is 5% or less than the maximum phase current Time delay of 1 or seconds before breaker trips Thermal memory to prevent immediate restart after overload trip to allow motor to cool down The MPCB is based on the F-Frame. Accessories for standard breakers apply to the MPCB. Unlike Motor Circuit Protectors (MCPs), MPCBs are UL 489 listed with 35 ka and 65 ka interruption ratings. Volume 4 Circuit Protection CA E February 01 V4-T-89

290 .3 Product Selection FDMP and HFDMP Continuous Amperes FLA le Dial Setting Continuous Amperes A B C D E F G H Technical Data and Specifications Specifications Feature FDMP HFDMP Interruption rating at 40V 65 ka 100 ka Interruption rating at 480V 35 ka 65 ka Interruption rating at 600V 18 ka 5 ka Icu/Ics at 40V 65 ka/33 ka ka/50 ka 1 Icu/Ics at 415V 35 ka/18 ka 1 65 ka/33 ka 1 100% rated No No FLA range (A) Motor class protection 5, 10, 15, 0 5, 10, 15, 0 Phase unbalance protection (current) active for phase current 40% delta (single-phase): (three-phase avg.) for 5 seconds 40% delta (single-phase): (three-phase avg.) for 5 seconds >0.5 FLA setting Phase loss protection (current) active for phase current Min. phase 0.5 max. phase for 1 second Min. phase 0.5 max. phase for 1 second >0.5 FLA setting Thermal memory protection Yes Yes High load indicator Pre-detection relays Note 1 IEC ratings available only on FWMP and HFWMP. For additional breaker solutions see Page V4-T ka Without Phase Unbalance, Class 10 Motor Protection Only 35 ka With Phase Unbalance and Adjustable Motor Class Protection 65 ka Without Phase Unbalance, Class 10 Motor Protection Only 65 ka With Phase Unbalance and Adjustable Motor Class Protection 80 FDMP3080L FDMP3080JL HFDMP3080L HFDMP3080JL 100 FDMP3100L FDMP3100JL HFDMP3100L HFDMP3100JL 160 FDMP3160L FDMP3160JL HFDMP3160L HFDMP3160JL 05 FDMP305L FDMP305JL HFDMP305L HFDMP305JL Internal accessories Factory installed Factory installed Aux. alarm, shunt trip, UVR Aux. alarm, shunt trip, UVR V4-T-90 Volume 4 Circuit Protection CA E February 01

291 .3 Type ELC Current Limiter Attachment Type ELC Current Limiter Attachment (Size 0 4) Product Description Eaton s Type ELC current limiter attachment for the MCP is designed to provide increased interrupting capacity. The combination may be used for the application up to 00,000A symmetrical at 600 Vac, making the MCP suitable for use in network distribution systems or other applications where unusually high fault currents are available. The current limiter connects to the load end of the MCP and is provided with terminals suitable for copper or aluminum conductors. (See Page V4-T-95.) Limiters are coordinated with the MCP so that normal fault currents are interrupted automatically by the MCP without any damage to the limiter. Only the rare very high fault is opened by the limiter. Faults that are interrupted by the limiter also magnetically trip the MCP, opening all three poles, preventing singlephase operation. Each of the three poles of the Type ELC limiter is equipped with an indicator that extends when a fault is interrupted by the limiter. Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4) Technical Data and Specifications Internal Accessories External Accessories Product Selection Type ELC Current Limiter Attachment ELC Current Limiter Attachment MCP (Amperes) 3 ELC3003R 7 ELC3007R 15 ELC3015R 30 ELC3030R 50 ELC3050R 100 ELC3100R 150 ELC3150R Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-95 V4-T-96 V4-T-37 Volume 4 Circuit Protection CA E February 01 V4-T-91

292 .3 J-Frame 600 Vac Maximum, 50 Vdc Maximum 600 Vac Maximum, 50 Vdc Maximum, continued NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP50A5C B C D E F G H I A HMCP50C5C B C D E F G H I A HMCP50D5C B C D E F G H I A HMCP50F5C B C D E F G H I A HMCP50G5C B C D E F G H I NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP50J5C B C D E F G H I A HMCP50K5C B C D E F G H I A HMCP50L5C B C D E F G H I A HMCP50W5C B C D E F G H I Motor FLA ranges are typical. The corresponding trip setting is at 13 times the minimum FLA value shown. Where a 13 times setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. For DC applications, actual trip levels are approximately 40% higher than values shown. 3 Three-pole catalog numbers shown. Two-pole catalog numbers begin with HMP in place of HMCP. All HMCP and HMP 50A come with line and load steel body terminals, T50KB. (With suffix C, without C comes with TA50KB.) V4-T-9 Volume 4 Circuit Protection CA E February 01

293 .3 K-Frame 600 Vac Maximum, 50 Vdc Maximum 600 Vac Maximum, 50 Vdc Maximum, continued NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP400A5C B C D HMCP400A5C E F G H I A HMCP400D5C B C D E F G H I A HMCP400F5C B C D E F G H I A HMCP400G5C B C D E F G H I A HMCP400J5C B C D E F G H I NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP400K5C B C D E F G H I A HMCP400L5C B C D E F G H I A HMCP400W5C B C D E F G H I A HMCP400N5C B C D E F G H I Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. For DC applications, actual trip levels are approximately 40% higher than values shown. 3 Three-pole catalog numbers shown. Two-pole catalog numbers begin with HMP in place of HMCP. All HMCP and HMP 400A come with aluminum body terminals, 3TA400K. numbers with suffix C as shown above come with copper body terminals 3T400K. Volume 4 Circuit Protection CA E February 01 V4-T-93

294 Vac Maximum, 50 Vdc Maximum, continued NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP400R5C B C D E F G H I A HMCP400X5C B C D E F G H I A HMCP400Y5C B C D E F G H I L-Frame 600 Vac Maximum 4 NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP A HMCP600L6W B C D E F G H A HMCP600X6W B C D E F G H A HMCP600Y6W B C D E F G H Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. For DC applications, actual trip levels are approximately 40% higher than values shown. 3 Three-pole catalog numbers shown. Two-pole catalog numbers begin with HMP in place of HMCP. 4 Equipped with electronic trip device. All HMCP and HMP 400A come with aluminum body terminals, 3TA400K. numbers with suffix C as shown above come with copper body terminals 3T400K. All HMCP 600A come without terminals. For terminals, see Page V4-T-5. V4-T-94 Volume 4 Circuit Protection CA E February 01

295 .3 N-Frame 600 Vac Maximum 1 NEMA Starter Cont. Cam Size Amps Setting Motor Full Load Current Amperes (FLA) MCP Trip Setting MCP A HMCP800X7W B C D E F G A HMCP1Y8W B C D E F G Technical Data and Specifications Type ELC Current Limiter Terminal Wire Sizes 3 Type ELC Current Limiter Maximum Amperes Wire Range AWG Metric (mm ) Standard Aluminum Terminals / / Non-Standard Terminals (Steel) Equipped with electronic trip device. Motor FLA ranges are typical. The corresponding trip setting is at 13X the minimum FLA value shown. Where a 13X setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. 3 Terminal wire connectors are UL listed for standard stranded wire sizes as defined in UL 486A or UL 486B. 4 Optional on special order for copper cable only. All HMCP 800A and 100A come without terminals. For terminals, see Page V4-T-5. Volume 4 Circuit Protection CA E February 01 V4-T-95

296 .3 Internal Accessories Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories Product Selection Technical Data and Specifications External Accessories Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-98 V4-T-317 V4-T-37 Internal Accessories Product Overview Alarm Switch For remote indication of automatic trip operation. Does not function with manual switching; however, it will operate when either a shunt trip or undervoltage release is operated. A make contact closes and a break contact opens when the alarm/lockout switch operates. The switch automatically resets when the circuit breaker is reset. Auxiliary Switch The auxiliary switch provides circuit breaker contact status information by monitoring the position of the molded cross bar that contains the moving contact arms. The auxiliary switch is used for remote indication and interlock system verification, and consists of one or two SPDT switches housed in a plug-in module. Each SPDT switch has one a and one b contact. When the circuit breaker contacts are open, the a contact is open and the b contact is closed. Auxiliary Switch and Alarm Switch Combination Each catalog number listed in tables on Pages V4-T-301 and V4-T-30 includes one auxiliary switch and one alarm switch. In an auxiliary switch ASL switch combination, the auxiliary switch is always mounted on the side of the plug-in module next to the center pole of the circuit breaker. Shunt Trip The shunt trip provides remote controlled tripping of the circuit breaker. The shunt trip consists of an intermittent rated solenoid with a tripping plunger and a cutoff switch assembled to a plug-in module. When required for ground fault protection applications, certain AC rated shunt trips, as noted in the electrical rating table, are suitable for operation at 55 percent of rated voltage. Select shunt trip catalog number for the voltage within the indicated voltage range. Shunt trip coils are designed to be applied at specific AC or DC voltages within the voltage range shown. Electrical ratings are also shown on applicable circuit breaker accessory nameplates. Low Energy Shunt Trip Low energy shunt trip devices are designed to operate from low energy output signals from dedicated current sensors typically applied in ground fault protection schemes. However, with a proper control voltage source, they may be applied in place of conventional trip devices for special applications. Flux paths surrounding permanent magnets used in the shunt trip assembly hold a charged spring poised in readiness to operate the circuit breaker trip mechanism. When a 100 microfarad capacitor charged to 8 Vdc is discharged through the shunt trip coil, the resultant flux opposes the permanent magnet flux field, which releases the stored energy in the spring to trip the circuit breaker. As the circuit breaker resets, the shunt trip reset arm is actuated by the circuit breaker handle, resetting the shunt trip. The plug-in module is mounted in retaining slots in the top of the trip unit. Coil is intermittent-rated only. Cutoff provisions required in control circuit. V4-T-96 Volume 4 Circuit Protection CA E February 01

297 .3 Undervoltage Release Mechanism The undervoltage release mechanism monitors a voltage (typically a line voltage) and trips the circuit breaker when the voltage falls to between 70 and 35 percent of the solenoid coil rating. The undervoltage release mechanism consists of a continuous rated solenoid with a plunger and tripping lever mounted in a plug-in module. The tab on the tripping lever resets the undervoltage release mechanism when normal voltage has been restored and the circuit breaker handle is moved to the reset (or OFF) position. With less than pickup voltage applied to the undervoltage release mechanism, the circuit breaker contacts will not touch when a closing operation is attempted. Note: Undervoltage release mechanism accessories are not designed for, and should not be used as, circuit interlocks. Accessory Terminal Block (R-Frame) (For fixed-mounted configuration.) Internal accessory wiring leads are normally supplied with pigtail leads (18 AWG) that exit from the right side of the circuit breaker. Where specified, fixed-mounted accessory terminal blocks are available. A maximum of one 4-point terminal block can be installed on the right side of the circuit breaker for the internal accessories. For convenience in determining the appropriate number of terminal block points required, refer to Page V4-T-97. PowerNet and Zone Interlock Kits (OPTIM 550 only) K-, L- and N-Frames Eaton s PowerNet Communications Kit can be ordered to add PowerNet communications to an existing OPTIM 550 breaker in the field. An 18-inch (457. mm) wiring pigtail is routed to the rear of the breaker: two wires for PowerNet and two wires for 4 Vdc (45 ma load). It is recommended that the power supply be an isolated high quality unit. Volume 4 Circuit Protection CA E February 01 V4-T-97

298 .3 Product Selection Alarm Switch Alarm Switch Make Break G-Frame Alarm Switch (RH Only) 1 Electrical s Contact Factory Volts Frequency Amperes Arrangement Suffix 34 Alarm Switch 40 50/60 Hz 6 1 Make/1 Break B3 188C75G03 Alarm Switch Auxiliary Switches Combination 40 50/60 Hz 6 1 Make/1 Break and 1A/1B B13 188C76G09 F-Frame Alarm Switch 1 of Contacts (Make and Break) Mounting Location (Pole) F-Frame HMCP Alarm Switch 1 Factory Mounted Factory Installation Kit 5 Connection Type and Location 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear 6 Opposite Side Same Side Suffix Suffix Suffix Suffix 1 Left 7 B01 B0 B03 B04 A1L1LPK A1L1LTK Right B05 B06 B07 B08 A1L1RPK A1L1RTK Left 7 B09 B10 B11 AL1LPK AL1LTK Right B1 B13 B14 AL1RPK AL1RTK 1 (Make only) Single-pole B15 8 of Contacts (Make and Break) Mounting Location (Pole) Factory Mounted Factory Installation Kit 5 Connection Type and Location 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear 6 Opposite Side Same Side Suffix Suffix Suffix Suffix 1 Left 7 B01 B0 B03 B04 MA1L1LPK MA1L1LTK Right B05 B06 B07 B08 MA1L1RPK MA1L1RTK Left 7 B09 B10 B11 MAL1LPK MAL1LTK Right B1 B13 B14 MAL1RPK MAL1RTK J-Frame and HMCP (J) Alarm Switch Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 9 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Contacts Mounting Same Side Rear 7 Opposite Side Same Side (Make and Location Suffix Suffix Suffix Suffix Break) (Pole) 1 Left j B01 B0 B03 B04 A1LLPK A1LLTK Right B05 B06 B07 B08 A1LRPK A1LRTK 6 1 F-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory. Internal accessories are UL listed for factory installation under E7819. Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected. Includes 4-inch (609.6 mm) external pigtail leads,18 AWG ( ). 3 A maximum of two internal accessories may be mounted in a three-pole circuit breaker. 4 Suitable for mounting in right pole only of two- or three-pole breaker. 5 Not listed with Underwriters Laboratories; for field installation. 6 Standard pigtail lead exit location. 7 Standard mounting location. 8 Factory installation only. Leads exit load end of circuit breaker. 9 Listed with Underwriters Laboratories; for field installation on interchangeable trip unit breakers under E j Standard mounting location leads exit rear of breaker. V4-T-98 Volume 4 Circuit Protection CA E February 01

299 .3 K-Frame and HMCP (K) Alarm Switch Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Sets of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix (1M and 1B) (Pole) 1 Left 3 B01 B0 B03 B04 A1L3LPK A1L3LTK Right 4 B05 B06 B07 B08 A1L3RPK A1L3RTK Left 3 B09 B10 B11 AL3LPK AL3LTK Right 4 B1 B13 B14 AL3RPK AL3RTK L-, HMCP (L) and (M) Frames and Alarm Switch Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Sets of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix (1M and 1B) (Pole) 1 Left 3 B01 B0 B03 B04 A1L4LPK A1L4LTK Right B05 B06 B07 B08 A1L4RPK A1L4RTK Left 3 B09 B10 B11 AL4LPK AL4LTK Right B1 B13 B14 AL4RPK AL4RTK N-Frame and HMCP (N) Alarm Switch Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 5 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Sets of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix (1M and 1B) (Pole) 1 Left B01 B0 B03 B04 A1L5LPK A1L5LTK Right 3 B05 B06 B07 B08 A1L5RPK A1L5RTK Left B09 B10 B11 AL5LPK AL5LTK Right 3 B1 B13 B14 AL5RPK AL5RTK R-Frame Alarm Switch (RH Only) Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 5 18-Inch (457. mm) Pigtail Leads Pigtail Leads of Contacts (Make and Break) Suffix 6 1 Listed with Underwriters Laboratories; for field installation on interchangeable trip unit breakers under E Standard mounting location. 3 Standard mounting location leads exit rear of breaker. 4 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. 5 Listed with Underwriters Laboratories for field installation under E A maximum of three ASL plug-in modules may be installed in a circuit breaker. 6 1 B05 A1L6RPK B1 AL6RPK Volume 4 Circuit Protection CA E February 01 V4-T-99

300 .3 Auxiliary Switch Auxiliary Switch a b G-Frame Auxiliary Switch (RH Only) Electrical s Volts Frequency Amperes F-Frame with Electronic Trip Unit Auxiliary Switch 9 1 Includes 4-inch external pigtail leads, 18 AWG ( ). A maximum of two internal accessories may be mounted in a three-pole circuit breaker. Suitable for mounting in right pole only of two- or three-pole breaker. 3 Standard pigtail lead exit location. 4 Not listed with Underwriters Laboratories; for field installation. 5 Pigtail wire size: 18 AWG (0.8 mm ). 6 Not for use on F-Frame with electronic trip unit volts (max.), 50/60 Hz switch for use in electronic circuit of 100 micro amperes and 15 Vdc minimum. 8 Not for use on four-pole circuit breakers. 9 Only for use on three-pole F-Frame breakers with electronic trip unit. j Listed with Underwriters Laboratories for field installation or interchangeable trip unit breakers under E k Standard mounting location leads exit rear of breaker. Contact Arrangement Factory Suffix /60 Hz 6 1a/1b A3 188C74G /60 Hz 6 a/b A6 188C73G03 F-Frame and HMCP (F) Auxiliary Switch Factory Mounted Factory Installation Kit 4 Connection Type and Location 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear 3 Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix A and B (Pole) 1 Left 5 A01 A0 A03 A04 A1X1PK A1X1LTK Left 5 A15 7 A16 7 A17 7 E1X1PK Right or Neutral 6 A05 A06 A07 A08 A1X1PK A1X1RTK 8 Right or Neutral 6 A18 7 A19 7 A0 7 Left 5 A09 A10 A11 AX1LPK AX1LTK Left 5 A1 7 A 7 EX1LPK Right or Neutral 6 A1 A13 A14 AX1RPK AX1RTK 8 of Contacts A and B Right or Neutral 6 A3 7 A4 7 EX1RPK Mounting Location (Pole) Factory Mounted Factory Installation Kit 4 Connection Type and Location 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Suffix Suffix Suffix Suffix 1 Right A30 A31 A3 A1X1RPKFDE J-Frame and HMCP (J) Auxiliary Switch Factory Mounted Field Mounted Connection Type and Location Factory Installation Kit j 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear 3 Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix A and B (Pole) 1 Left A01 A0 A03 A04 A1XPK A1XLTK Right k A05 A06 A07 A08 A1XPK A1XRTK 4 Left A09 A10 A11 AXPK AXLTK Right k A1 A13 A14 AXPK AXRTK 4 V4-T-300 Volume 4 Circuit Protection CA E February 01

301 .3 K-Frame and HMCP (K) Auxiliary Switch Factory Mounted Field Mounted Connection Type and Location Factory Installation Kit 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix A and B (Pole) 1 Left A01 A0 A03 A04 A1X3PK A1X3LTK Right 3 A05 A06 A07 A08 A1X3PK A1X3RTK 4 Left A09 A10 A11 AX3PK AX3LTK Right 3 A1 A13 A14 AX3PK AX3RTK 4 Right A1 A 148D8G Left A18 A15 A3X3LPK A3X3LTK Right 3 A17 A16 A3X3RPK A3X3RTK 4 L-, HMCP (L) and (M) Frames and Auxiliary Switch Factory Mounted Field Mounted Connection Type and Location Factory Installation Kit 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix A and B (Pole) 1 Left A01 A0 A03 A04 A1X4PK A1X4LTK Right A05 A06 A07 A08 A1X4PK A1X4RTK 4 Left A09 A10 A11 AX4PK AX4LTK Right A1 A13 A14 AX4PK AX4RTK 4 3 Left A18 A15 A3X4PK A3X4LTK Right A17 A16 A3X4PK A3X4RTK 4 N-Frame and HMCP (N) Auxiliary Switch Factory Mounted Field Mounted Connection Type and Location Factory Installation Kit 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear Opposite Side Same Side Contacts Location Suffix Suffix Suffix Suffix A and B (Pole) 1 Left A01 A0 A03 A04 A1X5PK A1X5LTK Right A05 A06 A07 A08 A1X5PK A1X5RTK 4 Left A09 A10 A11 AX5PK AX5LTK Right A1 A13 A14 AX5PK AX5RTK 4 3 Left A18 A15 A3X5LPK A3X5LTK Right A17 A16 A3X5RPK A3X5RTK 4 R-Frame Auxiliary Switch (RH Only) Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 of 18-Inch (457. mm) Pigtail Leads Pigtail Leads Contacts Suffix A and B 5 5 A1 AX6RPK 4 A19 A4X6RPK 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. 4 Not for use on four-pole circuit breakers. 5 A maximum of two auxiliary switches (any combination of a/b or 4a/4b plug-in modules may be installed in a circuit breaker. 6 This option is not field installable. 7 Available on the OPTIM 550 only. Communications are not available with this option. Volume 4 Circuit Protection CA E February 01 V4-T-301

302 .3 Auxiliary Switch and Alarm Switch Combination Auxiliary Switch and Alarm Switch Combination a b F-Frame Auxiliary Switch and Alarm Switch Combination Factory Mounted Factory Installation Kit 1 Connection Type and Location 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Mounting Same Side Rear Same Side Location Suffix Suffix Suffix (Pole) Left C01 C0 C03 AAL1LPK AAL1LTK Right C04 C05 C06 AAL1RPK AAL1RTK 3 F-Frame HMCP Auxiliary Switch and Alarm Switch Combination Factory Mounted Factory Installation Kit 1 Connection Type and Location 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Mounting Same Side Rear Same Side Location Suffix Suffix Suffix (Pole) Left 3 C01 C0 C03 MAAL1LPK MAAL1LTK Right C04 C05 C06 MAAL1RPK MAAL1RPK J-Frame and HMCP (J) Auxiliary Switch and Alarm Switch Combination Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 4 of 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Sets of Contacts Mounting Same Side Rear 5 Opposite Side Same Side (1A and 1B) Location Suffix Suffix Suffix Suffix (1M 1B) (Pole) 1 Left C01 C0 C03 AALLPK AALLTK Right 3 C04 C05 C06 AALRPK AALRTK 3 K-Frame and HMCP (K) Auxiliary Switch and Alarm Switch Combination Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 4 of 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Sets of Contacts Mounting Same Side Rear 5 Opposite Side Same Side (1A and 1B) Location Suffix Suffix Suffix Suffix (1M 1B) (Pole) 1 Left C01 C0 C03 AAL3LPK AAL3LTK Right 56 C04 C05 C06 AAL3RPK 7 AAL3RTK Right C07 C08 148D8G Not listed with Underwriters Laboratories for field installation. Standard mounting location. 3 Not for use on four-pole circuit breakers 4 Listed with Underwriters Laboratories for field installation of interchangeable trip unit breakers under E Standard mounting location leads exit rear of breaker. 6 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. 7 Will not install on OPTIM Trip (RH). 8 Available on the OPTIM 550 only. Communications are not available with this option. 9 This option is not field installable. V4-T-30 Volume 4 Circuit Protection CA E February 01

303 .3 L-, HMCP (L) and (M) Frames and Auxiliary Switch and Alarm Switch Combination Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear Opposite Side Same Side Sets of Location Suffix Suffix Suffix Suffix Contacts (Pole) 1A, 1B and 1 Make/1 Break A, B and 1 Make/1 Break 3A, 3B and 1 Make/1 Break Left C01 C0 C03 AA114LPK AA114LTK Right C04 C05 C06 AA114RPK AA114RTK 3 Left C07 C08 C1 AA14LPK AA14LTK Right C10 C11 C13 AA14RPK AA14RTK 3 Left C14 AA314LPK Right C15 AA314RPK N-Frame and HMCP (N) Auxiliary Switch and Alarm Switch Combination Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457 mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block of Mounting Same Side Rear Opposite Side Same Side Sets of Location Suffix Suffix Suffix Suffix Contacts (Pole) 1A, 1B and 1 Make/1 Break A, B and 1 Make/1 Break Left C01 C0 C03 AA115LPK AA115LTK Right C04 C05 C06 AA115RPK AA115RTK 3 Left C07 C08 C1 AA15LPK AA15LTK Right C10 C11 C13 AA15RPK AA15RTK 3 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 Not for use on four-pole circuit breaker. Volume 4 Circuit Protection CA E February 01 V4-T-303

304 .3 Shunt Trip Shunt Trip ST a G-Frame Shunt Trip (LH Three-Pole Only) Electrical s Suffix Volts Frequency Amperes 10 50/60 Hz 1.1 S1 1373D6G /60 Hz.1 S 1373D6G0 1 DC.8 S3 1373D6G15 4 DC 5.7 S4 1373D6G Hz S7 1373D6G0 F-Frame and HMCP (F) Shunt Trip Factory Mounted Factory Installation Kit 1 Connection Type and Location 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear 3 Opposite Side Same Side Voltage (AC Frequency = 50/60 Hz) Suffix 1 Not listed with Underwriters Laboratories, for field installation. Pigtail wire size: 18 AWG (0.8 mm ). 3 Standard pigtail lead exit location Vac marked suitable for ground fault protection devices. 5 Standard mounting location. 6 Not for use on four-pole circuit breakers. Suffix Suffix Suffix G-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory. Internal accessories are UL listed for factory installation under E7819. Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected. Left-Pole Mounting AC/DC s 1 4 Vac or Vdc S01 S0 S03 S04 SNT1LP03K SNT1LT03K Vac or Vdc 4 S05 S06 S07 S08 SNT1LP08K SNT1LT08K Vac or Vdc S09 S10 S11 S1 SNT1LP1K SNT1LT1K Vac or 0 50 Vdc S13 S14 S15 S16 SNT1LP18K SNT1LT18K Right- or Neutral-Pole Mounting AC/DC s Vac or Vdc S17 S18 S19 S0 SNT1RP03K SNT1RT03K Vac or Vdc 4 S1 S S3 S4 SNT1RP08K SNT1RT08K Vac or Vdc S5 S6 S7 S8 SNT1RP1K SNT1RT1K Vac or 0 50 Vdc S9 S30 S31 S3 SNT1RP18K SNT1RT18K 6 V4-T-304 Volume 4 Circuit Protection CA E February 01

305 .3 J-Frame and HMCP (J) Shunt Trip Voltage (AC Frequency = 50/60 Hz) Left-Pole Mounting AC/DC s K-Frame and HMCP (K) Shunt Trip 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 Suitable for use with Class 1 ground fault sensing element. 4 Not for use on four-pole circuit breakers. 5 For use with KT (thermal-magnetic) trip units only. 6 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Suffix Suffix Suffix Suffix 1 4 Vac or Vdc S41 S4 S43 S44 SNTP04K SNTT04K Vac or Vdc S49 S50 S51 S5 SNTP06K SNTT06K Vac or Vdc 3 S09 S10 S11 S1 SNTP11K SNTT11K Vac or 0 50 Vdc S13 S14 S15 S16 SNTP14K SNTT14K Vac S17 S18 S19 S0 SNTP18K SNTT18K Right- or Neutral-Pole Mounting AC/DC s 1 4 Vac or Vdc S45 S46 S47 S48 SNTP04K SNTT04K Vac or Vdc S53 S54 S55 S56 SNTP06K SNTT06K Vac or Vdc 3 S9 S30 S31 S3 SNTP11K SNTT11K Vac or 0 50 Vdc S33 S34 S35 S36 SNTP14K SNTT14K Vac S37 S38 S39 S40 SNTP18K SNTT18K 4 Voltage (AC Frequency = 50/60 Hz) Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Suffix Suffix Suffix Suffix Left-Pole Mounting AC/DC s 1 4 Vac or Vdc S41 S4 S43 S44 SNT3P04K SNT3T04K Vac or Vdc S49 S50 S51 S5 SNT3P06K SNT3T06K Vac or Vdc 3 S09 S10 S11 S1 SNT3P11K SNT3T11K Vac or 0 50 Vdc S13 S14 S15 S16 SNT3P14K SNT3T14K Vac S17 S18 S19 S0 SNT3P18K SNT3T18K Right- or Neutral-Pole Mounting AC/DC s Vac or Vdc S45 S46 S47 S48 SNT3P04K SNT3T04K Vac or Vdc S53 S54 S55 S56 SNT3P06K SNT3T06K Vac or Vdc 3 S9 S30 S31 S3 SNT3P11K SNT3T11K Vac or 0 50 Vdc S33 S34 S35 S36 SNT3P14K SNT3T14K Vac S37 S38 S39 S40 SNT3P18K SNT3T18K 4 Volume 4 Circuit Protection CA E February 01 V4-T-305

306 .3 L-, HMCP (L) and (M) Frames and Shunt Trip Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block Voltage (AC Frequency = 50/60 Hz) Suffix 1 Listed with Underwriters Laboratories, for field installation under E Standard mounting location leads exit rear of breaker. 3 For use with LT (thermal-magnetic) three-pole trip units only. Suffix Suffix Suffix Left-Pole Mounting AC/DC s 1 4 Vac or Vdc S01 S0 S03 S04 SNT4LP03K SNT4LT03K Vac S05 S06 S07 S08 SNT4LP05K SNT4LT05K Vdc S85 S86 S87 SNT4LP3K SNT4LT3K Vac S09 S10 S11 S1 SNT4LP11K SNT4LT11K Vdc S41 S4 S43 S44 SNT4LP6K SNT4LT6K Vac or 0 50 Vdc S13 S14 S15 S16 SNT4LP14K SNT4LT14K Vac S17 S18 S19 S0 SNT4LP18K SNT4LT18K Right-Pole Mounting AC/DC s Vac or Vdc S1 S S3 S4 SNT4RP03K SNT4RT03K Vac S5 S6 S7 S8 SNT4RP05K SNT4RT05K Vdc S88 S89 S90 SNT4RP3K SNT4RT3K Vac S9 S30 S31 S3 SNT4RP11K SNT4RT11K Vdc S45 S46 S47 S48 SNT4RP6K SNT4RT6K Vac or 0 50 Vdc S33 S34 S35 S36 SNT4RP14K SNT4RT14K Vac S37 S38 S39 S40 SNT4RP18K SNT4RT18K V4-T-306 Volume 4 Circuit Protection CA E February 01

307 .3 N-Frame and HMCP (N) Shunt Trip Voltage (AC Frequency = 50/60 Hz) R-Frame Shunt Trip (RH Only) 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 Supply voltages suitable for use with Class 1 GFP devices. Marking label included with accessory kits. 4 A maximum of two shunt trip plug-in modules may be installed in a circuit breaker. Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block Suffix Suffix Suffix Suffix Left-Pole Mounting AC/DC s 9 4 Vac or Vdc S01 S0 S03 S04 SNT5LP03K SNT5LT03K Vac S05 S06 S07 S08 SNT5LP05K SNT5LT05K Vac 3 S09 S10 S11 S1 SNT5LP11K SNT5LT11K Vdc S41 S4 S43 S44 SNT5LP6K SNT5LT6K Vac or 0 50 Vdc S13 S14 S15 S16 SNT5LP14K SNT5LT14K Vac S17 S18 S19 S0 SNT5LP18K SNT5LT18K Vdc S1 S S3 S4 SNT5LP3K SNT5LT3K Voltage (AC Frequency = 50/60 Hz) Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Pigtail Leads Suffix Vac or Vdc S1 SNT6P03K Vac S5 SNT6P05K Vac S9 SNT6P11K Vac or 0 50 Vdc S33 SNT6P14K Vac S37 SNT6P18K Vdc S88 SNT6P3K Vdc S45 SNT6P6K Volume 4 Circuit Protection CA E February 01 V4-T-307

308 .3 Low Energy Shunt Trip Ordering Information Select shunt trip catalog number for the voltage within the indicated voltage range. Shunt trip coils are designed to be applied at specific AC or DC voltages within the voltage range shown. Electrical ratings are also shown on applicable circuit breaker accessory nameplates. Low Energy Shunt Trip UV F-, J-, K-, L-, M-, N- and R-Frames and HMCPs Low Energy Shunt Trip 1 Mounting Positions (Pole) Same Side Rear 3 Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 18-Inch (457. mm) Pigtail Leads Terminal Block Side Same Side Pigtail Leads Terminal Block Opposite Suffix Suffix Suffix Suffix F-Frame Left NO1 NO NO3 NO4 LST1LPK 4 LST1LTK 4 Right 3 NO5 NO6 NO7 NO8 LST1RPK 4 LST1RTK 4 J-Frame Left NO1 NO NO3 LSTLPK Right 3 NO5 NO6 NO7 LSTRPK K-Frame Left 3 NO1 NO NO3 LST3LPK Right 56 NO5 NO6 NO7 LST3RPK L- and M-Frames Left NO1 NO NO3 LST4LPK Right NO5 NO6 NO7 LST4RPK N-Frame Left 3 NO1 NO NO3 LST5LPK R-Frame Right NO1 LST6RPK 1 Cutoff provisions required in control circuit. Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 4 For F-Frame HMCP, add an M to beginning of catalog number. Field Installation Kit referenced for factory use only, not UL listed for field installation. 5 For use with thermal-magnetic trip units only. 6 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. V4-T-308 Volume 4 Circuit Protection CA E February 01

309 .3 Undervoltage Release Mechanism Ordering Information Select handle reset undervoltage release mechanism catalog number for the voltage within the indicated voltage range. Undervoltage release mechanism coils are designed to be applied at specific AC or DC voltages within the voltage range shown on applicable circuit breaker accessory nameplates. Undervoltage Release Mechanism UV G-Frame Undervoltage Release Mechanism (LH Three-Pole Only) Electrical s Factory Volts (AC Only) Frequency Amperes Style s 13 Suffix 10 50/60 Hz D6G03 T1 4 50/60 Hz D6G04 T 48 50/60 Hz D6G05 T /60 Hz D6G06 T Hz D6G07 T Hz D6G08 T Hz D6G09 T /60 Hz D6G10 T Hz D6G11 T Hz D6G1 T Hz D6G13 T Hz D6G14 T1 1 Includes 4-inch (609.6 mm) external pigtail leads, 18 AWG ( ). A maximum of two internal accessories may be mounted in a three-pole circuit breaker. 3 Suitable for mounting in left pole only of three-pole breaker. G-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory. Internal accessories are UL listed for factory installation under E7819. Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected. Volume 4 Circuit Protection CA E February 01 V4-T-309

310 .3 F-Frame Factory Mounted (For F-Frame Breaker and F-Frame HMCP) Undervoltage Release Mechanism Connection Type and Location 18-Inch Pigtail Leads Terminal Block Same Side Rear 1 Opposite Side Same Side Voltage (AC Freq. = 50/60 Hz) Suffix Suffix Suffix Suffix Left-Pole Mounting AC s 1 Vac U01 U0 U03 U04 4 Vac U05 U06 U07 U08 48 Vac U37 U38 U39 U40 60 Vac U97 U98 U99 U Vac U13 U14 U15 U Vac U17 U18 U19 U Vac U1 U U3 U Vac U5 U6 U7 U8 Right-Pole Mounting AC s 3 1 Vac U49 U50 U51 U5 4 Vac U53 U54 U55 U56 48 Vac U85 U86 U87 U88 60 Vac U101 U10 U103 U Vac U61 U6 U63 U Vac U65 U66 U67 U Vac U69 U70 U71 U Vac U73 U74 U75 U76 Left-Pole Mounting DC s 1 Vdc U9 U30 U31 U3 4 Vdc U33 U34 U35 U36 48 Vdc U37 U38 U39 U40 60 Vdc U97 U98 U99 U Vdc U41 U4 U43 U Vdc U45 U46 U47 U48 Right-Pole Mounting DC s 3 1 Vdc U77 U78 U79 U80 4 Vdc U81 U8 U83 U84 48 Vdc U85 U86 U87 U88 60 Vdc U101 U10 U103 U Vdc U89 U90 U91 U Vdc U93 U94 U95 U96 1 Standard pigtail lead exit location. Standard mounting location. 3 Not for use on right pole of four-pole circuit breaker. F-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory. Internal accessories are UL listed for factory installation under E7819. Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected. V4-T-310 Volume 4 Circuit Protection CA E February 01

311 .3 F-Frame Field Mounted Undervoltage Release Mechanism F-Frame Breaker F-Frame Breaker HMCP Factory Installation Kits 1 Pigtail Leads Terminal Block Pigtail Leads Terminal Block Voltage (AC Freq. = 50/60 Hz) 1 Not listed with Underwriters Laboratories, for field installation. Standard mounting location. 3 Not for use on right pole of four-pole circuit breaker. Left-Pole Mounting AC s 1 Vac UVH1LP0K UVH1LT0K MUVH1LP0K MUVH1LT0K 4 Vac UVH1LP03K UVH1LT03K MUVH1LP03K MUVH1LT03K 48 Vac UVH1LPK UVH1LTK MUVH1LPK MUVH1LTK 60 Vac UVH1LP4K UVH1LT4K MUVH1LP4K MUVH1LT4K Vac UVH1LP08K UVH1LT08K MUVH1LP08K MUVH1LT08K Vac UVH1LP11K UVH1LT11K MUVH1LP11K MUVH1LT11K Vac UVH1LP15K UVH1LT15K MUVH1LP15K MUVH1LT15K Vac UVH1LP18K UVH1LT18K MUVH1LP18K MUVH1LT18K Right-Pole Mounting AC s 3 1 Vac UVH1RP0K UVH1RT0K MUVH1RP0K MUVH1RT0K 4 Vac UVH1RP03K UVH1RT03K MUVH1RP03K MUVH1RT03K 48 Vac UVH1RPK UVH1RTK MUVH1RPK MUVH1RTK 60 Vac UVH1RP4K UVH1RT4K MUVH1RP4K MUVH1RT4K Vac UVH1RP08K UVH1RT08K MUVH1RP08K MUVH1RT08K Vac UVH1RP11K UVH1RT11K MUVH1RP11K MUVH1RT11K Vac UVH1RP15K UVH1RT15K MUVH1RP15K MUVH1RT15K Vac UVH1RP18K UVH1RT18K MUVH1RP18K MUVH1RT18K Left-Pole Mounting DC s 1 Vdc UVH1LP0K UVH1LT0K MUVH1LP0K MUVH1LT0K 4 Vdc UVH1LP1K UVH1LT1K MUVH1LP1K MUVH1LT1K 48 Vdc UVH1LPK UVH1LTK MUVH1LPK MUVH1LTK 60 Vdc UVH1LP4K UVH1LT4K MUVH1LP4K MUVH1LT4K Vdc UVH1LP6K UVH1LT6K MUVH1LP6K MUVH1LT6K 0 50 Vdc UVH1LP8K UVH1LT8K MUVH1LP8K MUVH1LT8K Right-Pole Mounting DC s 3 1 Vdc UVH1RP0K UVH1RT0K MUVH1RP0K MUVH1RT0K 4 Vdc UVH1RP1K UVH1RT1K MUVH1RP1K MUVH1RT1K 48 Vdc UVH1RPK UVH1RTK MUVH1RPK MUVH1RTK 60 Vdc UVH1RPK UVH1RTK MUVH1RPK MUVH1RTK Vdc UVH1RP6K UVH1RT6K MUVH1RP6K MUVH1RT6K 0 50 Vdc UVH1RP8K UVH1RT8K MUVH1RP8K MUVH1RT8K Volume 4 Circuit Protection CA E February 01 V4-T-311

312 .3 Block 1 J-Frame and HMCP (J) Undervoltage Release Mechanism Factory Mounted Field Mounted Connection Type and Location Field Installation Kits Terminal 18-Inch (457. mm) Pigtail Leads Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block 3 Voltage (AC Freq. = 50/60 Hz) Suffix Left-Pole Mounting AC s 4 Suffix Suffix Suffix 1 For electrical rating data for manual, automatic and electrical reset undervoltage release mechanisms, refer to Eaton. Listed with Underwriters Laboratories for field installation under E Not for use on right pole of four-pole circuit breakers. 4 Standard mounting location leads exit rear of breaker. 1 Vac U05 U06 U07 U08 UVHLP0K UVHLT0K 4 Vac U09 U10 U11 U1 UVHLP03K UVHLT03K Vac U13 U14 U15 U16 UVHLP05K UVHLT05K Vac U17 U18 U19 U0 UVHLP08K UVHLT08K Vac U1 U U3 U4 UVHLP11K UVHLT11K Vac U5 U6 U7 U8 UVHLP15K UVHLT15K Right-Pole Mounting AC s 3 1 Vac U37 U38 U39 U40 UVHRP0K UVHRT0K 4 Vac U41 U4 U43 U44 UVHRP03K UVHRT03K Vac U45 U46 U47 U48 UVHRP05K UVHRT05K Vac U49 U50 U51 U5 UVHRP08K UVHRT08K Vac U53 U54 U55 U56 UVHRP11K UVHRT11K Vac U57 U58 U59 U60 UVHRP15K UVHRT15K Left-Pole Mounting DC s 4 1 Vdc T01 T0 T03 T04 UVHLP0K UVHLT0K 4 Vdc T05 T06 T07 T08 UVHLP1K UVHLT1K Vdc T09 T10 T11 T1 UVHLP3K UVHLT3K Vdc T13 T14 T15 T16 UVHLP6K UVHLT6K 0 50 Vdc T17 T18 T19 T0 UVHLP8K UVHLT8K Right-Pole Mounting DC s 3 1 Vdc T1 T T3 T4 UVHRP0K UVHRT0K 4 Vdc T5 T6 T7 T8 UVHRP1K UVHRT1K Vdc T9 T30 T31 T3 UVHRP3K UVHRT3K Vdc T33 T34 T35 T36 UVHRP6K UVHRT6K 0 50 Vdc T37 T38 T39 T40 UVHRP8K UVHRT8K V4-T-31 Volume 4 Circuit Protection CA E February 01

313 .3 K-Frame and HMCP (K) Undervoltage Release Mechanism Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 Terminal 18-Inch (457. mm) Pigtail Leads Block Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block Voltage (AC Freq. = 50/60 Hz) Suffix Suffix Suffix 1 Listed with Underwriters Laboratories, for field installation under E Standard mounting location leads exit rear of breaker. 3 For use with KT (thermal-magnetic) trip units only. 4 Not for use on right pole of four-pole circuit breaker. 5 Breakers with K-Frame OPTIM 550 can only accept accessories in left pole. Suffix Left-Pole Mounting AC s 1 Vac U05 U06 U07 U08 UVH3LP0K UVH3LT0K 4 Vac U09 U10 U11 U1 UVH3LP03K UVH3LT03K Vac U13 U14 U15 U16 UVH3LP05K UVH3LT05K Vac U17 U18 U19 U0 UVH3LP08K UVH3LT08K Vac U1 U U3 U4 UVH3LP11K UVH3LT11K Vac U5 U6 U7 U8 UVH3LP15K UVH3LT15K Right-Pole Mounting AC s Vac U37 U38 U39 U40 UVH3RP0K UVH3RT0K 4 Vac U41 U4 U43 U44 UVH3RP03K UVH3RT03K Vac U45 U46 U47 U48 UVH3RP05K UVH3RT05K Vac U49 U50 U51 U5 UVH3RP08K UVH3RT08K Vac U53 U54 U55 U56 UVH3RP11K UVH3RT11K Vac U57 U58 U59 U60 UVH3RP15K UVH3RT15K Left-Pole Mounting DC s 1 Vdc T01 T0 T03 T04 UVH3LP0K UVH3LT0K 4 Vdc T05 T06 T07 T08 UVH3LP1K UVH3LT1K Vdc T09 T10 T11 T1 UVH3LP3K UVH3LT3K Vdc T13 T14 T15 T16 UVH3LP6K UVH3LT6K 0 50 Vdc T17 T18 T19 T0 UVH3LP8K UVH3LT8K Right-Pole Mounting DC s Vdc T1 T T3 T4 UVH3RP0K UVH3RT0K 4 Vdc T5 T6 T7 T8 UVH3RP1K UVH3RT1K Vdc T9 T30 T31 T3 UVH3RP3K UVH3RT3K Vdc T33 T34 T35 T36 UVH3RP6K UVH3RT6K 0 50 Vdc T37 T38 T39 T40 UVH3RP8K UVH3RT8K Volume 4 Circuit Protection CA E February 01 V4-T-313

314 .3 L-, HMCP (L) and (M)-Frames and Undervoltage Release Mechanism Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 Terminal 18-Inch (457. mm) Pigtail Leads Block Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block Voltage (AC Freq. = 50/60 Hz) Suffix Left-Pole Mounting AC s Suffix Suffix 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 For use with LT (thermal-magnetic) trip units only. 4 Not for use on right pole of four-pole circuit breaker. Suffix 1 Vac U05 U06 U07 U08 UVH4LP0K UVH4LT0K 4 Vac U09 U10 U11 U1 UVH4LP03K UVH4LT03K Vac U13 U14 U15 U16 UVH4LP05K UVH4LT05K Vac U17 U18 U19 U0 UVH4LP08K UVH4LT08K Vac U1 U U3 U4 UVH4LP11K UVH4LT11K Vac U5 U6 U7 U8 UVH4LP15K UVH4LT15K Right-Pole Mounting AC s 34 1 Vac U37 U38 U39 U40 UVH4RP0K UVH4RT0K 4 Vac U41 U4 U43 U44 UVH4RP03K UVH4RT03K Vac U45 U46 U47 U48 UVH4RP05K UVH4RT05K Vac U49 U50 U51 U5 UVH4RP08K UVH4RT08K Vac U53 U54 U55 U56 UVH4RP11K UVH4RT11K Vac U57 U58 U59 U60 UVH4RP15K UVH4RT15K Left-Pole Mounting DC s 1 Vdc T01 T0 T03 T04 UVH4LP0K UVH4LT0K 4 Vdc T05 T06 T07 T08 UVH4LP1K UVH4LT1K Vdc T09 T10 T11 T1 UVH4LP3K UVH4LT3K Vdc T13 T14 T15 T16 UVH4LP6K UVH4LT6K 0 50 Vdc T17 T18 T19 T0 UVH4LP8K UVH4LT8K Right-Pole Mounting DC s 34 1 Vdc T1 T T3 T4 UVH4RP0K UVH4RT0K 4 Vdc T5 T6 T7 T8 UVH4RP1K UVH4RT1K Vdc T9 T30 T31 T3 UVH4RP3K UVH4RT3K Vdc T33 T34 T35 T36 UVH4RP6K UVH4RT6K 0 50 Vdc T37 T38 T39 T40 UVH4RP8K UVH4RT8K V4-T-314 Volume 4 Circuit Protection CA E February 01

315 .3 N-Frame and HMCP (N) Undervoltage Release Mechanism Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457. mm) Pigtail Leads Terminal Block Same Side Rear Opposite Side Same Side Pigtail Leads Terminal Block Voltage (AC Freq. = 50/60 Hz) R-Frame Undervoltage Release Mechanism (RH only) Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 3 18-Inch (457. mm) Pigtail Leads Pigtail Leads Suffix Suffix Suffix 1 Listed with Underwriters Laboratories for field installation under E Standard mounting location leads exit rear of breaker. 3 Endurance: 500 electrical operations plus 500 mechanical operations. 4 Pigtail wire size: 18 AWG (0.8 mm ). Leads are orange and brown. Suffix Left-Pole Mounting AC s 1 Vac U05 U06 U07 U08 UVH5LP0K UVH5LT0K 4 Vac U09 U10 U11 U1 UVH5LP03K UVH5LT03K Vac U13 U14 U15 U16 UVH5LP05K UVH5LT05K Vac U17 U18 U19 U0 UVH5LP08K UVH5LT08K Vac U1 U U3 U4 UVH5LP11K UVH5LT11K Vac U5 U6 U7 U8 UVH5LP9K UVH5LT9K Left-Pole Mounting DC s 1 Vdc T01 T0 T03 T04 UVH5LP0K UVH5LT0K 4 Vdc T05 T06 T07 T08 UVH5LP1K UVH5LT1K Vdc T09 T10 T11 T1 UVH5LP3K UVH5LT3K Vdc T13 T14 T15 T16 UVH5LP6K UVH5LT6K 0 50 Vdc T17 T18 T19 T0 UVH5LP8K UVH5LT8K Voltage (AC Frequency = 50/60 Hz) Suffix Vac U37 UVH6RP0K 4 Vac U41 UVH6RP03K Vac U45 UVH6RP05K Vac U49 UVH6RP08K Vac U53 UVH6RP11K Vac U57 UVH6RP9K 1 Vdc T1 UVH6RP0K 4 Vdc T5 UVH6RP1K Vdc T9 UVH6RP3K Vdc T33 UVH6RP6K 0 50 Vdc T37 UVH6RP8K Volume 4 Circuit Protection CA E February 01 V4-T-315

316 .3 Accessory Terminal Block (R-Frame) Accessory Terminal Block (R-Frame) R-Frame Accessory Terminal Block 1 Factory Installed Suffix Q01 of Control Wires for Each Internally Mounted Accessory Type of Accessory Auxiliary switch Alarm (Signal)/ Lockout switch PowerNet and Zone Interlock Kits (OPTIM 550 Only) K-, L- and N-Frames PowerNet and Zone Interlock Kits PowerNet Interlock Kit Field Mounted TBRDK of Contacts per Single Accessory a/b 4a/4b 1m/1b m/b Shunt trip N/A Low energy shunt N/A Undervoltage release mechanism N/A Circuit Breaker Factory Install Suffix Required of Wires 1 One 4-point accessory terminal block provided with circuit breaker when ordered factory installed or shipped from warehouse as separate item when ordered for field installation. See Digitrip RMS master connection diagram (IL 9C714). Installation of these kits restrict any other attachments from being installed in the RH pole. 3 Includes a ground fault alarm signal that can drive the ground fault alarm unit (catalog number GFAU) K-Frame PN ICK550K L-Frame PN ICK550L N-Frame PN ICK550N Zone Interlock/Ground Kit 3 Circuit Factory Install Breaker Suffix K-Frame ZG ZGK550K L-Frame ZG ZGK550L N-Frame ZG ZGK550N PowerNet and Zone Interlock/Ground Kit 3 Circuit Factory Install Breaker Suffix K-Frame ZGP ZGPK550K L-Frame ZGP ZGPK550L N-Frame ZGP ZGPK550N V4-T-316 Volume 4 Circuit Protection CA E February 01

317 .3 Technical Data and Specifications Alarm Switch F-Frame Electrical Data 1 Maximum Voltage Frequency J-Frame Electrical Data 56 Maximum Current Amperes Multi-Pole Circuit Breakers /60 Hz DC DC Single-Pole Circuit Breakers 15/50 50/60 Hz DC DC Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC DC K-Frame Electrical Data 67 Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC DC Dielectric Withstand Voltage Dielectric Withstand Voltage Dielectric Withstand Voltage L- and M-Frames Electrical Data 67 Maximum Voltage Frequency R-Frame Electrical Data 9j Maximum Current Amperes /60 Hz DC DC N-Frame Electrical Data 8 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC DC Endurance: 6000 electrical operations plus 4000 mechanical operations. Endurance: 6000 electrical operations plus 000 mechanical operations. 3 Non-inductive load. 4 Inductive (L/R = 0.06). 5 Endurance: 6000 electrical operations plus 000 mechanical operations. 6 Pigtail wire size: 18 AWG (0.8 mm ). 7 Endurance: 5000 electrical operations plus 1000 mechanical operations. 8 Endurance: 3000 electrical operations plus 1000 mechanical operations. i Endurance: 500 electrical operations plus 500 mechanical operations. j Pigtail wire size: 18 AWG (0.8 mm ). Leads are red, black and blue. Dielectric Withstand Voltage Dielectric Withstand Voltage Dielectric Withstand Voltage Volume 4 Circuit Protection CA E February 01 V4-T-317

318 .3 Auxiliary Switch F-Frame Electrical Data 1 Maximum Voltage Frequency Maximum Current Amperes /60 Hz /60 Hz DC DC J-Frame Electrical Data 1 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC K-Frame Electrical Data 5 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC Dielectric Withstand Voltage Dielectric Withstand Voltage Dielectric Withstand Voltage L- and M-Frames Electrical Data Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC N-Frame Electrical Data 6 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC R-Frame Electrical Data 78 Maximum Voltage Frequency /60 Hz 6 15 DC DC Maximum Current Amperes 1 Endurance: 6000 electrical operations plus 4000 mechanical operations. Pigtail wire size: 18 AWG (0.8 mm ). 3 For use in electronic circuit of 100 micro amperes and 15 Vdc minimum. 4 Non-inductive load. 5 Endurance: 5000 electrical operations plus 1000 mechanical operations. 6 Endurance: 3000 electrical operations plus 1000 mechanical operations. 7 Endurance: 500 electrical operations plus 500 mechanical operations. 8 Pigtail wire size: 18 AWG (0.8 mm ). Leads are red, black and blue. Dielectric Withstand Voltage Dielectric Withstand Voltage V4-T-318 Volume 4 Circuit Protection CA E February 01

319 .3 Auxiliary Switch and Alarm Switch Combination F-Frame Electrical Data 1 Maximum Voltage Frequency J-Frame Electrical Data 4 Maximum Current Amperes /60 Hz DC DC Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC DC K-Frame Electrical Data 5 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC Dielectric Withstand Voltage Dielectric Withstand Voltage Dielectric Withstand Voltage L- and M-Frames Electrical Data 5 Maximum Maximum Voltage Frequency Current Amperes /60 Hz DC DC N-Frame Electrical Data 6 Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC DC Endurance: 6000 electrical operations plus 4000 mechanical operations. Pigtail wire size: 18 AWG (0.8 mm ). 3 Non-inductive load. 4 Endurance: 6000 electrical operations plus 000 mechanical operations. 5 Endurance: 5000 electrical operations plus 1000 mechanical operations. 6 Endurance: 3000 electrical operations plus 1000 mechanical operations. Dielectric Withstand Voltage Dielectric Withstand Voltage Volume 4 Circuit Protection CA E February 01 V4-T-319

320 .3 Shunt Trip F-Frame Electrical Data 13 50/60 Hz DC Supply Voltage Minimum Operating Voltage VA Supply Voltage J-Frame Electrical Data 14 Minimum Operating Voltage /60 Hz DC Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA VA K-Frame Electrical Data /60 Hz DC Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage Average unlatching time: 6 milliseconds. Average circuit breaker contact total opening time: 18 milliseconds. 3 Endurance: 6000 electrical operations plus 4000 mechanical operations. 4 Endurance: 6000 electrical operations plus 000 mechanical operations. 5 Supply voltages suitable for use with Class 1 GFP devices. Marking label included with accessory kits. 6 Approximate unlatching time: 6 milliseconds. 7 Approximate total circuit breaker contact opening time: 8 milliseconds. 8 Endurance: 5000 electrical operations plus 1000 mechanical operations. VA V4-T-30 Volume 4 Circuit Protection CA E February 01

321 .3 L- and M-Frame Electrical Data 13 N-Frame Electrical Data 15 50/60 Hz DC 50/60 Hz DC Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage Approximate unlatching time: 6 milliseconds. Approximate total circuit breaker contact opening time: 18 milliseconds. 3 Endurance: 5000 electrical operations plus 1000 mechanical operations. 4 Supply voltages suitable for use with Class 1 GFP devices. Marking label included with accessory kits. 5 Endurance: 3000 electrical operations plus 1000 mechanical operations. VA Volume 4 Circuit Protection CA E February 01 V4-T-31

322 .3 R-Frame Electrical Data Application s Electrical Operating s Suffix Voltage (V) Frequency (Hz) Supply Voltage (V) 1 Approximate unlatching time of 6 milliseconds. Average circuit breaker contact total opening time approximately 6 milliseconds, at rated voltage. 3 Endurance: 500 electrical operations and 500 mechanical operations. 4 Shunt trip can be operated up to a maximum of six times per minute. 5 Maximum operating voltage 110% of maximum voltage range rating. 6 Pigtail wire size: 18 AWG (0.8 mm ). Leads are yellow and white. Minimum Operating Voltage (V) I p (A) I rms at 0.50s (A) I rms at 0.033s (A) VA 03/03K 4 50/ DC /05K / / /11K / / / / / / /14K / / / DC DC /18K / / / / /3K DC DC /6K DC DC DC One Minute Dielectric Withstand Voltage (V) V4-T-3 Volume 4 Circuit Protection CA E February 01

323 .3 Undervoltage Release Mechanism F-Frame Electrical Data 1 50/60 Hz DC Supply Dropout Voltage Pickup Voltage Supply Dropout Voltage Pickup Voltage Voltage Minimum Maximum Maximum VA Voltage Minimum Maximum Maximum J-Frame Electrical Data 3 50/60 Hz DC Supply Dropout Voltage Pickup Voltage Supply Dropout Voltage Pickup Voltage Voltage Minimum Maximum Maximum VA Voltage Minimum Maximum Maximum Endurance: 6000 electrical operations plus 4000 mechanical operations. Endurance: 6000 electrical operations plus 000 mechanical operations. 3 For electrical rating data for manual, automatic and electrical reset undervoltage release mechanisms, refer to Eaton. VA VA Volume 4 Circuit Protection CA E February 01 V4-T-33

324 .3 K-Frame Electrical Data 1 50/60 Hz DC Supply Dropout Voltage Pickup Voltage Supply Dropout Voltage Pickup Voltage Voltage Minimum Maximum Maximum VA Voltage Minimum Maximum Maximum L- and M-Frames Electrical Data 1 50/60 Hz DC Supply Dropout Voltage Pickup Voltage Supply Dropout Voltage Pickup Voltage Voltage Minimum Maximum Maximum VA Voltage Minimum Maximum Maximum Note 1 Endurance: 5000 electrical operations plus 1000 mechanical operations. VA VA V4-T-34 Volume 4 Circuit Protection CA E February 01

325 .3 N-Frame Electrical Data 1 50/60 Hz DC Supply Dropout Voltage Pickup Voltage Supply Dropout Voltage Pickup Voltage Voltage Minimum Maximum Maximum VA Voltage Minimum Maximum Maximum Note 1 Endurance: 3000 electrical operations plus 1000 mechanical operations. VA Volume 4 Circuit Protection CA E February 01 V4-T-35

326 .3 R-Frame AC Undervoltage Release Mechanism (Handle Reset) s 1 Application s Electrical Operating s Approximate Operating Time (ms) Supply Dropout Voltage (V) Pickup Minimum Initiation Voltage Voltage Voltage UVR Circuit Breaker Suffix (V) (V) Minimum Maximum (V) Max. VA Response 3 Contact Separation 4 1 Endurance: 500 electrical operations plus 500 mechanical operations. Pigtail wire size: 18 AWG (0.8 mm ). Leads are orange and brown. 3 UVR will override a momentary voltage dip up to the response time shown. 4 Unlatching occurs 1 millisecond before circuit breaker contacts begin to separate. 5 For 1 minute. Maximum Circuit Breaker Contact Opening 0/0K /03K /05K /08K /11K /9K R-Frame DC Undervoltage Release Mechanism (Handle Reset) s 1 Application s Electrical Operating s Approximate Operating Time (ms) Supply Dropout Voltage (V) Pickup Minimum Initiation Voltage Voltage Voltage UVR Circuit Breaker Suffix (V) (V) Minimum Maximum (V) Max. VA Response 3 Contact Separation 4 Maximum Circuit Breaker Contact Opening 0/0K /1K /3K /6K /8K Dielectric Withstand Voltage (V) 5 Dielectric Withstand Voltage (V) 5 V4-T-36 Volume 4 Circuit Protection CA E February 01

327 .3 External Accessories Contents Description Product Overview Standards and Certifications Quick Reference G-Frame ( Amperes) F-Frame (10 5 Amperes) J-Frame (70 50 Amperes) K-Frame ( Amperes) L-Frame ( Amperes) M-Frame ( Amperes) N-Frame ( Amperes) R-Frame ( Amperes) Motor Circuit Protectors (MCP) Motor Protection Circuit Breakers (MPCB) Type ELC Current Limiter Attachment (Size 0 4).... Internal Accessories External Accessories Product Selection Accessories Technical Data and Specifications Dimensions Page V4-T-11 V4-T-1 V4-T-13 V4-T-17 V4-T-141 V4-T-158 V4-T-166 V4-T-193 V4-T-19 V4-T-30 V4-T-58 V4-T-8 V4-T-89 V4-T-91 V4-T-96 V4-T-331 V4-T-354 V4-T-355 V4-T-356 External Accessories Product Overview End Cap Kit The end cap kit slides onto the line or load conductor of the circuit breaker and acts as a threaded adapter for the conductor to accept a ring terminal or other bolt-on connector. The end cap kit is available with English and metric thread sizes. (Field installation only.) Listed per UL File E7819. Keeper Nut The keeper nut slides onto the line or load conductor of the circuit breaker and acts as a threaded adapter for the conductor to accept a ring terminal or other bolt-on connector. The keeper nut is available with English and metric thread sizes. Screws and washers are supplied by customer. (Field installation only.) Listed per UL File E7819. L-, M-, N-Frames Not required. Terminals are threaded. J-Frame Plug Nut The plug nut is used in applications where screwconnected ring-type terminals are preferred to connect cables to circuit breaker conductors. The plug nut is press-fit into the opening in the circuit breaker terminal conductor. Screws and washers are supplied by customer. Terminal Adapter Control Wire Terminal Kit The control wire terminal kit provides a means to tap off control power from a main disconnect, using the provided male end of a quick disconnect. For use with steel or stainless steel terminals only. Note: Terminal Kits contain one terminal for each pole and one terminal cover. Multiwire Connectors Eaton s field-installed multiwire connectors for the load side (OFF) end terminals, are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks. Multiwire lug kits include mounting hardware, insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed as used on the load side (OFF) end. Base Mounting Hardware Drawout Cassette The drawout cassette is currently for use with the standard three-pole 65 ka/ 480 Vac, 1600 and 000 ampere RD circuit breakers only. It consists of two separate components: the movable mechanism that is factory mounted to the circuit breaker frame and the stationary mechanism that is housed in the cassette and shipped separately. The drawout mechanism has four positions. Connected: the breaker is fully connected to the primary stabs and secondary contacts Test: the breaker is not connected to the primary stab but is connected to the secondary contacts Disconnected: both the primary stabs and the secondary contacts are disconnected Withdraw: the breaker can be removed from the cassette Terminal Shields Terminal shields provide protection against accidental contact with live line side terminations. Terminal shields are fabricated from high dielectric insulating material and fasten over the front terminal access openings. Small openings in the shields provide limited access to the terminals for tightening connectors. (Field installation only.) Volume 4 Circuit Protection CA E February 01 V4-T-37

328 .3 Terminal End Covers The terminal end covers are designed for use in motor control center applications where, because of confined spaces, line side conductors are normally custom fitted. The molded end covers are made of high dielectric glasspolyester and slide over the line ends of the circuit breaker. Close fitting conductor openings are molded into the end covers. The end cover and circuit breaker case fit together to form terminal compartments that isolate discharged ionizing gases during circuit breaker tripping. Terminal end covers are available with two conductor opening diameters, 0.5-inch (6.4 mm) and inch (10.4 mm), and are listed per UL File E7819. (Field installation only.) Interphase Barriers The interphase barriers provide additional electrical clearance between circuit breaker poles for special termination applications. The barriers are high dielectric insulating plates that are installed in the molded slots between the terminals. (Field installation only.) Two per package. Base Mounting Plate Suitable for mounting six single-pole circuit breakers. DIN Rail Adapter For use with standard 35 mm DIN rail such as, 35 x 7.5 or 35 x 15 mm per DIN EN500. Adapter mounting screws included are for use with twoand three-pole circuit breakers. Adapters for singlepole circuit breakers clip into the base molding. Key Operated Attachment Lock Dog (Non-Padlockable) Non-Padlockable Handle Block The non-padlockable handle block secures the circuit breaker handle in either the ON or OFF position. (Trip-free operation allows the circuit breaker to trip when the handle block holds the circuit breaker handle in the ON position.) The device is positioned over the circuit breaker handle and secured by a setscrew to deter accidental operation of the circuit breaker handle. Listed per UL File E7819. (Field installation only.) Padlockable Handle Padlockable Handle Lock The device is positioned in the cover opening to prevent handle movement. Will accommodate one 5/16-inch (8 mm) padlock. Snap-on Padlockable Handle Lock Hasp The snap-on padlockable handle lock allows the handle to be locked in the OFF or ON position. (Trip-free operation allows the circuit breaker to trip when the handle lock holds the circuit breaker handle in the ON position.) This device was designed for use on the single-pole circuit breaker, but may be used on one-, two-, threeand four-pole styles. The handle lock snaps onto the escutcheon area of the handle with an optional retaining screw for added secureness. The handle lock will accommodate one padlock with a 1/4-inch (6.4 mm) shackle. Listed per UL File E7819. (Field installation only.) Padlockable Handle Lock Hasp The padlockable handle lock hasp allows the handle to be locked in the ON or OFF position. (Trip-free operation allows the circuit breaker to trip when the handle lock holds the circuit breaker handle in the ON position.) The hasp mounts on the circuit breaker cover within the trimline. The cover is predrilled on both sides of the operating handle so that the hasp can be mounted on either side of the handle. The hasp will accommodate up to three padlocks with 1/4-inch (6.4 mm) shackles, one per circuit breaker. Listed per UL File E7819. (Field installation only.) Cylinder Lock The cylinder lock internally blocks the trip bar in the tripped position to prevent the circuit breaker from being switched to ON. The cylinder lock is factory installed in the left pole only of the circuit breaker cover. Other internally mounted accessories cannot be installed in the same pole as the cylinder lock. (Factory installation only.) Key Interlock Kit (Lock Not Included) The key interlock is used to externally lock the circuit breaker handle in the OFF position. When the key interlock is locked, an extended deadbolt blocks movement of the circuit breaker handle. Uniquely coded keys are removable only with the deadbolt extended. Each coded key controls a group of circuit breakers for a given specific customer installation. The key interlock assembly is Underwriters Laboratories listed for field installation under UL File E7819 and consists of a mounting kit and a purchaser supplied deadbolt lock. The mounting kit comprises a mounting plate, which is secured to the circuit breaker cover in either the left- or right-pole position, key interlock mounting screws, and a wire seal. Specific mounting kits are required for individual key interlock types. Sliding Bar Interlock The sliding bar interlock provides mechanical interlocking between two adjacent three-pole circuit breakers. It is installed on the enclosure cover between the circuit breakers. When the sliding bar interlock handle is moved from one side to the other, a bar extends to alternately block movement of the circuit breaker handles and prevents both circuit breakers from being switched to ON at the same time. Sliding bar interlocks are not UL listed. (Field installation only.) Walking Beam Interlock The walking beam Interlock provides mechanical interlocking between two adjacent circuit breakers of the same pole configuration. The walking beam interlock mounts on a bracket behind and between the circuit breakers. A plunger on each end of the beam is inserted through an access hole in the back plate and base of each circuit breaker. The walking beam interlock prevents both circuit breakers from being switched ON at the same time. If a walking beam interlock is installed, the wiring troughs in the back of the circuit breaker case are blocked by the plungers and cannot be used for cross wiring. Factory modified circuit breakers are required for this application. UL File E Electrical Operator The electrical (solenoid) operator is a single solenoid mechanism that enables local and remote circuit breaker ON, OFF, and reset switching. The electrical operator is mounted on the circuit breaker cover within the trimline of the circuit breaker. The electrical operator uses a unique bi-stable latch that allows the device to operate using one solenoid. The accessory provides high-speed switching with a maximum operating time of 5 cycles (80 ms), making it suitable for generator synchronizing applications. Means are provided for remote electrical operation and for local manual operation. A special slide includes provisions for padlocking the circuit breaker handle in the OFF position. The slide will accept three padlock shackles with a maximum diameter of 1/4-inch (6.4 mm) each. An interlock electrically disconnects the solenoid when the electrical operator cover is removed. The rating data tables provide electrical rating data for the electrical (solenoid) operator. V4-T-38 Volume 4 Circuit Protection CA E February 01

329 .3 The electrical (motor) operator allows the circuit s breaker to be opened, closed or reset remotely. It also has a lock-off capability and provisions for manual operation. The electrical (motor) operator contains a reversible motor connected to a ball screw. The ball screw drives the circuit breaker handle. Limit switches and relays are used to control the motor. Plug-In Adapters Plug-in adapters simplify installation and front removal of circuit breakers. Individual line and load plug-in adapters are available for rear connection applications on two-, three-, and four-pole circuit breakers. Common mounting plates for lineand load-end adapters are available. One plug-in adapter kit is required for line-end and one for load-end. Plug-in adapters are UL approved unless otherwise noted. Rear Connecting Studs Rear connecting studs are available in several sizes to accommodate specific fixedmounted circuit breaker applications. Each rear connecting stud assembly consists of one stud and one tube. To maintain proper clearances between poles, select alternate long and short stud assemblies for circuit breakers with more than one pole. One assembly is required for line-end and one for load-end of each pole. Tubes must be ordered separately. Connecting studs are available only with English thread sizes. Note: Not UL listed. Panelboard Connecting Straps Panelboard connecting straps are used to connect the circuit breaker terminals to the panelboard bus. The panelboard connecting straps are available with various ratings for outside and center poles. (Field installation only.) Panelboard connecting straps are available to meet the needs of most standard panelboard applications. Style numbers for mounting brackets for CDP panelboard installations are also included. Note: Not UL listed. Refer to panelboard manufacturer for compatibility. Handle Mechanisms Handle mechanisms are used to operate molded case circuit breakers, molded case switches and motor circuit protectors. They are available in three basic configurations flange mounted, through-thedoor and direct (closecoupled) providing safe, dependable operation and ease of installation. Flange mounted: Flex Shaft C371 Through-the-door: Rotary Universal Rotary Direct (close-coupled): Universal Direct Euro IEC G Direct Handle mechanisms are typically used on enclosed circuit breakers, control panels and motor control centers in many different applications. Eaton has a handle mechanism for virtually any need. Flange Mounted Handle Mechanisms Flange mounted handle mechanisms mount on the flange of an enclosure door. The Flex Shaft is an extra heavy-duty mechanism that includes a flexible shaft in various lengths, 3 feet (0.9m) through 10 feet (3m) for use with various size enclosures. The Flex Shaft handle will accept up to three padlock shackles, each with a maximum diameter of 3/8-inch (9.5 mm). Can be used with NEMA 1, 3R and 1 fabricated enclosures. An optional handle is available for Flex Shaft that is suitable for use with NEMA 4 and 4X environments. Flex Shaft comes preset from the factory, requiring only minor field adjustments on installation, which takes about 10 minutes a significant time savings compared to installation of other types of flange handle mechanisms. The Flex Shaft mechanism also takes up less interior enclosure space than competitive designs and the handle fits standard flange cutouts. Flex Shaft handle can be remotely mounted from breaker, where an operator can use it by funneling the cable through conduit. The Type C371 circuit breaker operating mechanisms are designed for installation in control enclosures where main or branch circuit protective devices are required. All circuit breaker mechanisms are suitable for right-hand mounting. Auxiliary contacts are not available for mounting on operating mechanisms. Where required, have them installed in circuit breaker. Type C371 is UL listed under File E6635. Flex Shaft is UL listed under File E64983 and meets CSA requirements. Through-the-Door Handle Mechanisms Eaton s through-the-door handle mechanisms mount on the front of an enclosure or cabinet door and externally operate the circuit breaker via a variable depth shaft or a linear operator (Type MC). Each rotary type handle mechanism includes a handle, base operating mechanism and shaft that can be cut to various lengths. Rotary and Universal Rotary handle mechanisms are for use with molded case circuit breakers (G, F, J, K, L, MDL), molded case switches and motor circuit protectors. Rotary and Universal Rotary, are UL listed and meet CSA requirements. Universal Rotary also meets IEC947-1/ for international compliance. Rotary UL File is E Type 4/4X handles are similar to standard handles except they include an internal neoprene gasket. Type 4/4X handle style number is 6648CG03. Due to gasketing effect between the handle and the housing, the handle may not indicate a tripped position. Universal Rotary F-Frame Direct (Close-Coupled) Handle Mechanisms Direct (close-coupled) handle mechanisms mount directly to the circuit breaker. They are used in shallow enclosures where the standard variable depth Through-the-door type mechanism is not practical or cannot be used. They are typically for applications where high volume, standardized enclosures are being fabricated. The Euro IEC Direct handle mechanism can be used on F- through R-Frames. The G Direct is available with a black or the yellow handle, and with or without a shroud. It is suitable for use with NEMA 1 enclosures. It is for use only with the G-Frame (GD, GC, GHC, GMCP). An escutcheon ring and interlock clip are provided as standard. The standard design includes a lock-off feature. The Universal Direct handle mechanism is UL 489 listed, IEC947-1/ and meets CSA requirements. The Euro IEC Direct handle mechanism is IEC G Direct is UL listed and meets CSA requirements. Handle Extension Handle extension is not included with J, K, L, M and N-Frame breakers. It must be purchased separately. Volume 4 Circuit Protection CA E February 01 V4-T-39

330 .3 Type LFD Current Limiter The LFD current limiter is an accessory that bolts to the load end of a standard FDB or FD thermal-magnetic circuit breaker, providing 00,000A interrupting capacity at up to 600 Vac. LFD current limiters for thermal-magnetic and electronic circuit breakers are listed with Underwriters Laboratories under File E4739. Ground Fault Alarm Unit The ground fault alarm unit is a remotely mounted device with a combination indicating light/test button that will light when the breaker trips or alarms on ground fault. The ground fault alarm unit requires a separate 10 Vac power source to power the light and the internal relay, which has 1NO and 1NC contacts for remote indication. The ground fault alarm unit can be panel mounted for ordering with an optional face mounting bracket. For use on Digitrip 310 only, K- through N- Frame. IQ Energy Sentinel The IQ Energy Sentinel is a highly accurate, microprocessor-based, breaker-mounted device designed to monitor power and energy readings. It represents an alternative to watt meters, watt-hour meters, and watt demand meters. Key advantages include savings in space, lower installation costs, and remote monitoring capability. The IQ Energy Sentinel mounts on the load side of a F-Frame (150 ampere) circuit breaker. It can be applied on threephase, four-wire systems, or single-phase, three-wire systems with voltage connected through Phases A and C. For more information, see Descriptive Bulletin Potential Transformer Module The potential transformer module is required for the Digitrip OPTIM 1050 to provide a voltage input to allow the trip unit to monitor power and energy as well as power factor. The potential transformer module is a 6 VA transformer with a primary voltage input of up to 600 volt line to line. Three 0.1 ampere fuses are provided on the primary of the transformer and can be used for isolation purposes during dielectric testing. The device is normally panel mounted and can feed up to 16 OPTIM trip units. Solid-State (Electronic) Portable Test Kit The solid-state (electronic) portable test kit provides verification of performance of all ratings of Digitrip 310 electronic trip units installed in circuit breakers while in service under varying load and/or phase imbalance. The test kit operates on 10-volt, 50/60 Hz power; it includes complete instructions and test times for testing long time, short time/instantaneous operation and optional ground fault operation of the circuit breaker. Breaker Interface Module (BIM) The Breaker Interface Module (BIM) is a panel mounted user interface device that is mounted on the front of an electrical assembly or at a remote location. The BIM is used to access, configure, test and display information for OPTIM trip units and other devices. The BIM consists of four display windows, eight function buttons, 18 LEDs, and a graphical time/current curve to provide breaker status, operational information, protection status and energy monitoring. A 4 Vdc power supply is required to provide power to the BIM. This is supplied by the switchboard builder to Eaton s specifications. The BIM is a member of Eaton s PowerNet family of communicating devices that connects OPTIM trip units, Digitrip RMS 810/910 trip units and energy sentinels as a subnetwork system. The BIM can also be connected to a main network via a PONI module to PowerNet software. Digitrip OPTIMizer The Digitrip OPTIMizer is a hand-held programmer that is used to access, configure, test and display information from OPTIM trip units. The OPTIMizer plugs into the front of an OPTIM trip unit via an eight-pin telephone jack and is powered by a nine-volt battery or the auxiliary power module. One highlighted feature is the Copy and Download commands. Setting up multiple OPTIM trips can be finished in minutes and with no errors. An Auxiliary Power Module connection provides a trip test when control power is not present at the breaker. The OPTIMizer is supplied as a standard package to include the programmer, the eightpin connection cord, battery and carrying case. The auxiliary power module is optional. Auxiliary Power Module The auxiliary power module is a power supply requiring 10 Vac input at 50 or 60 Hz that provides a 3 Vdc output. The auxiliary power module provides control power for testing an OPTIM trip unit when other means of control power is not available or for continuous OPTIMizer operation versus temporary with a battery. The auxiliary power module connects into the top of the Digitrip OPTIMizer via a keyed receptacle. The main application for the auxiliary power module would be for the testing of a standalone non-communicating OPTIM breaker that ordinarily would not have control power. Cause of Trip Display/Remote Mount Cause of Trip Display The Cause of Trip Display can be field-installed on any Digitrip RMS 310+ trip unit. The device provides breaker information through an LCD screen, such as cause of trip, phrase current, ground current and low loads. The display is ideal for troubleshooting common trips such as ground fault, long delay, and instantaneous/short delay. The DIGIVIEW version will provide a local display at the breaker without additional wiring by connecting directly onto the trip unit. The DIGIVIEWR06 version has a 6 foot cable that allows users to mount the display on the outside of an enclosure door and connect to the trip unit that is contained inside the enclosure. Cause of Trip LED Module The Cause of Trip LED Module can be field-installed on any Digitrip RMS 310+ trip unit. The device provides a cause of trip indication via LED. The Cause of Trip LED Module connects directly onto the trip unit. When the breaker trips, the module indicates the cause of trip (long delay, short delay, instantaneous and ground) via LED indication. The module is reset after the breaker is reset. Note: The OPTIMizer can work off of 3 Vdc control power, although 4 Vdc is the standard on OPTIM breakers. V4-T-330 Volume 4 Circuit Protection CA E February 01

331 .3 Product Selection Termination Hardware End Cap Kit End Cap Kit End Cap Kit Thread Type Termination Hardware Keeper Nut F-Frame Keeper Nut K-Frame Keeper Nut F-Frame Keeper Nut K-Frame Keeper Nut Thread Type Thread Size Note L-, M-, N-Frames not required. Terminals are threaded. Two-Pole F-Frame (5A) Imperial 10 3 KPEK1 Metric M 5 KPEKM1 Three-Pole F-Frame (5A) Imperial 10 3 KPEK1 Metric M 5 KPEKM1 Four-Pole F-Frame (5A) Imperial 10 3 KPEK14 Metric M 5 KPEKM14 Three-Pole J-Frame Imperial KPEK Metric M 8 KPEKM Four-Pole J-Frame Imperial KPEK4 Metric M 8 KPEKM4 Three-Pole K-Frame Imperial KPEK3 Metric M 8 KPEKM3 Four-Pole K-Frame Imperial KPEK34 Metric M 8 KPEKM34 Three-Pole L-Frame Imperial KPEK4 Metric M-8 KPEKM4 Four-Pole L-Frame Imperial KPEK44 Metric M 8 KPEKM44 Thread Type Thread Size Imperial 10 3 KPR1A Metric M 5 KPR1AM Thread Size Package of 1 (Priced Individually) Line/Load End Imperial Line KPR3A Load KPR3B Package of 3 Metric M 8 Line KPR3AM Load KPR3BM Volume 4 Circuit Protection CA E February 01 V4-T-331

332 .3 Termination Hardware J-Frame Plug Nut K-Frame Terminal Adapter J-Frame Plug Nut K-Frame Terminal Adapter 1 F-Frame Ordering Information Terminals must be ordered separately. Priced individually. F-Frame Kit Thread Type F-Frame Control Wire Terminal Kit J- and K-Frame Ordering Information Terminals must be ordered separately. Priced individually. J- and K-Frame Kit J- and K-Frame Control Wire Terminal Kit L-Frame Control Wire Terminal Kit AWG Wire Range/ Conductors 1 K-Frame terminal adapter for use in replacing LB/DA breakers. Not for use with T50KB terminals. 3 Individually packed. 4 Terminal kits contain one terminal for each pole and one terminal cover. 5 Two-pole kit. 6 Three-pole kit. 7 Four-pole kit. Thread Size Imperial PLN Metric M 6 PLNM Line/Load End Line and load Description TAD3 Maximum Amperes Package of 6 Package of 1 control wire terminal tangs. 150 FCWTK Description Package of 1 control wire terminal tangs. Al/Cu () 3/0 350 kcmil Cu () kcmil Al/Cu () kcmil Al/Cu () kcmil Al/Cu () kcmil 5 FCWTK5 Metric Wire Range mm KCWTK TA60LDCW T60LDCW TA603LDKCW TA603LDKCW TA603LDKCW 47 V4-T-33 Volume 4 Circuit Protection CA E February 01

333 .3 Termination Hardware Multiwire Connectors G-Frame Control Wire Terminal Description Multiwire Connectors Ordering Information (Package of 3) Base Mounting Hardware Ordering Information Hardware for surface mounting of circuit breakers is supplied only on request. Hardware consists of mounting screws and lockwashers. Order hardware for circuit breaker pole configurations as required. Mounting Hardware Control wire terminal (kit of 1) 565B38G01 GCWTK Maximum Amperes Wires per Terminal Wire Size Range AWG Cu Kit G-Frame TA100G3K TA100G6K F-Frame TA150F3K TA150F6K J-Frame TA50J3K TA50J6K K-Frame /0 3TA400K3K TA400K6K Screw Length in Inches (mm) G-Frame x.63 (3.5 x 66.7 mm) Std. 64B375G x 3.00 (3.5 x 76. mm) 8703C80G05 Note 1 GD breakers require special tapping for multiwire lugs, as described in the IL or use with standard aluminum collars. Volume 4 Circuit Protection CA E February 01 V4-T-333

334 .3 Imperial Thread Mounting Hardware of Poles Metric Thread Mounting Hardware Note Description 1 One set of hardware for two circuit breakers. Type of Mounting F-Frame x inch pan-head steel screws, lockwashers and clamps Individual 64B375G01 Group 1 64B375G x 1.5-inch pan-head steel screws and lockwashers Individual 418B80G01 3, x 1.5-inch pan-head steel screws and lockwashers Individual BMH1 J-Frame, 3, x.75 inch pan-head steel screws and lockwashers Individual BMH K-Frame, 3, x 1.5 inch pan-head steel screws and lockwashers Individual BMH3 L-Frame, 3, x 1.5 inch filister-head steel screws and lockwashers and flat washers Individual BMH4 M-Frame, x 1.5 inch filister-head steel screws and lockwashers and flat washers Individual BMH5 N-Frame, 3, x 1.5 inch pan-head steel screws and lockwashers Individual BMH5 R-Frame Supplied by customer of Poles Description Type of Mounting F-Frame 1 M4 0.7 x 80 mm pan-head steel screws, lockwashers, and clamps Individual 418B80G09 Group 1 418B80G10 M4 0.7 x 38 mm pan-head steel screws and lockwashers Individual 418B80G11 3, 4 M4 0.7 x 38 mm pan-head steel screws and lockwashers Individual BMH1M J-Frame, 3, 4 M6 0.7 x 70 mm pan-head steel screws and lockwashers Individual BMHM K-Frame, 3, 4 M6 0.7 x 38 mm pan-head steel screws and lockwashers Individual BMH3M L-Frame, 3 Individual BMH4M M-Frame, 3 Individual BMH5M N-Frame, 3 Individual BMH5M R-Frame Supplied by customer V4-T-334 Volume 4 Circuit Protection CA E February 01

335 .3 Drawout Cassette R-Frame with Moveable Mechanism Terminal Shields F-Frame J-Frame RD Drawout Cassette Description 65 ka/480 Vac Version Stationary mechanism RD0DOS 1 RD0DOSS 100 ka/480 Vac Version Stationary mechanism RDC0DOS 1 G-Frame Terminal Shield Units in Package F-Frame Terminal Shield Standard (Package of 10) (Priced Individually) J-Frame Terminal Shield 1 Without shutters. With shutters. 10 GTSK3 of Poles Location 1 Line 65B9G06 Line 65B9G07 RDC0DOSS 3 Line 65B9G08 410B95G01 4 Line 65B9G09 410B95G0 of Poles Location (Package of 10), 3 Line End 166C07G01 4 Line End 6631C01G01, 3 Load End 6641C16G01 4 Load End 6641C16G0 Special For Use When Electrical Operator is Mounted on Circuit Breaker Volume 4 Circuit Protection CA E February 01 V4-T-335

336 .3 K-Frame L-Frame M-Frame K-Frame Terminal Shield of Poles Location L-Frame Terminal Shield (Package of 1) 314C40G05 M-Frame Terminal Shield N-Frame Terminal Shield Terminal End Covers Ordering Information The terminal end cover is available for three-pole circuit breakers only. Two conductor opening sizes are available. Specify quantity (one per circuit breaker) when ordering. F-Frame F-Frame Terminal End Covers (Package of 10), 3 Line TS33LN 4 Line TS34LN 3 Load TS33LD (Package of 1) 08B966G01 (Package of 1) NTS3K Conductor Opening Diameter in Inches (mm) 0.5 (6.35 mm) TEC (10.41 mm) TEC Interphase Barriers Ordering Information Two per package. Interphase Barrier Base Mounting Plate Base Mounting Plate DIN Rail Adapter DIN Rail Adapter Key Operated Attachment Key Operated Attachment Lock Dog (Non-Padlockable) Lock Dog (Non- Padlockable) Interphase Barriers Frame F Base Mounting Plate G-Frame GD/GHC DIN Rail Adapter G-Frame GD/GHC Key Operated Attachment G-Frame GD/GHC Lock Dog (Non-Padlockable) G-Frame GD/GHC/GHB/GMCP Note 1 For use on three-pole breakers only. IPB1 J, K IPB3 L IPB4 M IPB4 N of Units in Package IPB5 1 07B513G01 of Poles of Units in Package 1, 10 15C79G C79G0 1 of Units in Package 10 GKOA of Units in Package 1 194C01H01 V4-T-336 Volume 4 Circuit Protection CA E February 01

337 .3 Non-Padlockable Handle Block Non-Padlockable Handle Block Padlockable Handle Padlockable Handle Padlockable Handle Lock Padlockable Handle Lock Non-Padlockable Handle Block Frame F LKD1 J, K LKD3 L, M, N LKD4 Padlockable G-Frame GD/GHC/GHB of Units in Package Padlockable Handle Lock Snap-On Padlockable Handle Lock Hasp Snap-On Padlockable Handle Lock Hasp Snap-On Padlockable Handle Lock Hasp Frame 1 Accepts 0.85 Lock Shank. Padlockable in the OFF position only C77G C77G C77G06 Frame G GPHBOFF J, K PHB3 F PHL1 Volume 4 Circuit Protection CA E February 01 V4-T-337

338 .3 Padlockable Handle Lock Hasp Padlockable Handle Lock Hasp Cylinder Lock Cylinder Lock Padlockable Handle Lock Hasp Description Cylinder Lock Frame Note 1 For padlockable handle lock hasp to padlock handle in OFF position only, order either catalog number. F-Frame Single-pole breakers PHL1 Two-, three- and four-pole breakers PLK1 For left side mounting PLK1LOFF For right side mounting PLK1ROFF J, K-Frames Two-, three- and four-pole breakers PLK3 For left side mounting PLK3LOFF 1 For right side mounting PLK3ROFF 1 L-Frame (Side Mounted) Side Mounted Lock ON or OFF HLK4 Lock OFF only (left-hand mount) HLK4LOFF 1 L-Frame (Top Mounted) Lock ON or OFF HLK4S Lock OFF only HLK4SOFF 1 M-Frame Lock ON or OFF HLK4 Lock OFF only (left-hand mount) HLK4LOFF 1 M-Frame (Vertical Mounting) Lock ON/OFF HLK4S Lock OFF only HLK4SOFF N-Frame Side mounted PLK5 Top mounted (ON/OFF) PLK5S Top mounted (OFF only) PLK5SOFF 1 R-Frame Lock ON/OFF HLK6 Lock OFF only HLK6OFF 1 F, J, K Order by description V4-T-338 Volume 4 Circuit Protection CA E February 01

339 .3 Key Interlock Kit Ordering Information Key interlock mounting kits are for field installation only. Select mounting kit catalog numbers to match type of lock used. Key interlocks are supplied by customer. Key Interlock Kit photo position Key Interlock Kit Lock Manufacturer Lock Type Bolt Projection in Withdrawn Position in Inches (mm) Kit F-Frame Superior B (9.5) KYK1 Kirk F 0.38 (9.5) KYK1 Square D SF None KYK1 Castell 1 K or QK 0.38 (9.5) CTK1 J, K-Frames Superior B (9.5) KYK3 Kirk F 0.38 (9.5) KYK3 Square D SF None KYK3 Castell 1 K or QK 0.38 (9.5) CTK3 L-, M-, N-Frames Superior B (9.5) KYK4 Kirk F 0.38 (9.5) KYK4 Square D SF None KYK4 Castell 1 K or QK 0.38 (9.5) CTK4 R-Frame Superior B (5.4) KYK6 Kirk F 1.0 (5.4) KYK6 Square D SF 1.0 (5.4) KYK6 Castell 1 K or QK 1.0 (5.4) CTK6 JG-Frame Superior B (9.5) KYKJG Kirk F 0.38 (9.5) KYKJG Square D SF None KYKJG Castell 1 K or QK 0.38 (9.5) CTKJG LG-Frame Superior B (9.5) KYKLG Kirk F 0.38 (9.5) KYKLG Square D SF None KYKLG Castell 1 K or QK 0.38 (9.5) CTKLG Note 1 When ordering Castell Interlock, it is necessary for customer to specify that the mounting bolt holes must be 10 mm in diameter Volume 4 Circuit Protection CA E February 01 V4-T-339

340 .3 Sliding Bar Interlock Ordering Information The sliding bar interlock is available for mounting between two adjacent threepole circuit breakers with circuit breakers centerline Sliding Bar Interlock Walking Beam Interlock Ordering Information The walking beam interlock is available for mounting between two adjacent circuit breakers spaced 1/4-inch (6.4 mm) apart and having the same pole configuration. The two circuit breakers must be factory modified to accept the walking beam interlock assembly (suitable for use with either two-, three- or four-pole circuit breakers). Walking Beam Interlock Sliding Bar Interlock Centerline Spacing Frame in Inches (mm) Walking Beam Interlock Frame Note 1 Three-pole only. spacing as indicated in table and enclosure front panel thickness of 1/8 or 3/16 inch (3. or 4.8 mm). (For field installation only.) F 4.19 (106.4) SBK1 J 4.38 (111.3) SBK K 5.75 (146.0) SBK3 L, M 8.50 (15.9) SBK4 N 8.50 (15.9) SBK5 F With properly modified circuit breakers, the walking beam interlock is suitable for field installation. Order circuit breakers specifying modification for walking beam (0% price adder) and select walking beam interlock from table below. Circuit breakers and walking beam interlock are boxed and shipped separately. WBL1 K WBL3 L, M WBL4A N R 1 WBL5 WBL6 V4-T-340 Volume 4 Circuit Protection CA E February 01

341 .3 Electrical Operator F-Frame Electrical (Solenoid) Operator Terminal Block Voltage Frequency 10 AC EOP1T07 EOP1P07 40 AC EOP1T11 EOP1P11 F-Frame Electrical (Motor) Operator 1 Voltage J-Frame Electrical (Solenoid) Operator Terminal Block K-Frame Electrical (Solenoid) Operator Terminal Block K-Frame Electrical (Solenoid) Operator Base Mounting Kit Frame L- and M-Frame Electrical (Motor) Operator (310 and OPTIM) Terminal Block Note Frequency 10 50/60 Hz AC MOPFD10C 4 DC MOPFD4D 15 DC MOPFD10C /60 Hz MOPFD40C 0 50 DC MOPFD40C Operating Voltage Frequency 18-Inch (457. mm) Pigtail Lead 10 50/60 Hz AC EOPT /60 Hz AC EOPT11 Operating Voltage Frequency 10 50/60 Hz AC EOP3MT /60 Hz AC EOP3MT11 K Operating Voltage BBMK3 Frequency 10 50/60 Hz EOP4MT /60 Hz EOP4MT /60 Hz EOP4MT11A /60 Hz EOP4MT15 15 DC EOP4MT6 4 DC EOP4MT1 1 Motor operators MOP1P07, MOP1P03DC, MOP1P05DC and MOP1P07DC are replaced by MOPFD motor operators listed in table. 18-Inch (457. mm) Pigtail Lead Volume 4 Circuit Protection CA E February 01 V4-T-341

342 .3 N-Frame Electrical (Motor) Operator Operating Voltage R-Frame Electrical (Motor) Operator Plug-In Adapters J-Frame Ordering Information (Flat Bar Type) K-Frame Ordering Information (Flat Bar Type) 600 Vac Maximum Two-Pole Three-Pole Four-Pole Frequency ampere maximum. Use three-pole mounting plate for two-pole circuit breaker. Pigtail Leads 10 50/60 Hz EOP5T /60 Hz EOP5T /60 Hz EOP5T /60 Hz EOP5T15 4 DC EOP5T1 48 DC EOP5T 15 DC EOP5T6 Operating Voltage Frequency 10 50/60 Hz EOP6T08K 40 50/60 Hz EOP6T11K 48 DC EOP6T1K Factory-Installed Terminal Block F-Frame Ordering Information (Flat Bar Type) Continuous Two-Pole Three-Pole Four-Pole Current (Amperes) D13G D13G0 1480D13G07 1 Mounting Plate 176C511H01 507C047H01 Continuous Current (Amperes) Terminal End Two-Pole Three-Pole Four-Pole 50 Line 160C86G05 160C86G06 131C67G01 Load 160C86G07 160C86G08 131C67G0 One line and one load 506C144G7 506C144G8 Mounting plate PMP3 Continuous Current (Amperes) 400 PAD3 PAD33 Mounting plate PMP33 V4-T-34 Volume 4 Circuit Protection CA E February 01

343 .3 L-Frame (Threaded Stud Type) Two-Pole Three-Pole Four-Pole Continuous Current (Amperes) M-Frame (Flat Bar Type) 600 Vac Maximum Two-Pole N-Frame (Flat Bar Type) Two-Pole Plug-In Adapters 600 (threaded stud type) 506C059G03 506C059G04 PAD (flat bar type) 188C19G01 188C19G0 6636C55H01 Mounting plate 504C84H01 504C84H01 Continuous Current (Amperes) Three-Pole D53G05 614D53G06 Mounting plate 190C73H01 190C73H01 Continuous Current (Amperes) Three-Pole D53G03 614D53G04 Mounting plate 190C73H01 190C73H01 Frame of Poles Standard Certification FD 3 IEC PAD3F FD 4 IEC PAD4F JD 3 IEC PAD3JD KD 3 IEC PAD3K LD 3 IEC PAD3LD LD 4 IEC PAD4LD Volume 4 Circuit Protection CA E February 01 V4-T-343

344 .3 Rear Connecting Studs F-Frame 1 Stud Ampere J-Frame 1 Stud Ampere K-Frame 1 Stud Ampere Stud Tube For 15 to 100 Ampere Circuit Breakers 100A short 451D874G01 3B9446H0 100A short 451D874G01 3B9446H1 100A short 451D874G01 3B9446H 100A short 451D874G01 3B9446H3 100A long 451D874G0 3B9446H4 100A long 451D874G0 3B9446H5 100A long 451D874G0 3B9446H6 100A long 451D874G0 3B9446H7 For 110 to 5 Ampere Circuit Breakers 5A short 374D883G01 374D883H06 5A short 374D883G01 374D883H07 5A short 374D883G01 374D883H08 5A short 374D883G01 374D883H09 5A long 374D883G0 374D883H10 5A long 374D883G0 374D883H11 5A long 374D883G0 374D883H1 5A long 374D883G0 374D883H13 Stud Tube 50A short 5010D3G01 456D983H05 50A short 5010D3G01 456D983H06 50A short 5010D3G01 456D983H07 50A long 5010D3G0 5010D3H05 50A long 5010D3G0 5010D3H06 50A long 5010D3G0 5010D3H07 Stud Standard Tube 400A short 664C14G0 313C909H17 400A short 664C14G04 313C909H18 400A short 664C14G06 313C909H19 400A long 664C14G03 313C909H0 400A long 664C14G05 313C909H1 400A long 664C14G07 313C909H L-Frame Ordering Information Stud 314C960G07 314C960G08 314C960G09 M-Frame Ordering Information 1 Stud Ampere Note 1 Not UL listed. Stud 5 314C960G C960G C960G C960G C960G C960G C960G C960G C960G C960G1 N-Frame Ordering Information 1 Stud Stud Ampere BG BG BG B375G B375G03 V4-T-344 Volume 4 Circuit Protection CA E February 01

345 .3 Panelboard Connecting Straps F-Frame Panelboard Connecting Straps Bus Spacing in Inches (mm) Continuous Current (Amperes) F-Frame Mounting Bracket J-Frame Panelboard Connecting Straps K-Frame Panelboard Connecting Straps K-Frame Mounting Bracket Pole Connector Type Center Outside.75 (69.9) B14G0 673B14G09.75 (69.9) B14G0 673B14G10.75 (69.9) B14G04 673B14G (88.9) C7G01 153C7G (88.9) C73G03 153C73G (88.9) C73G01 153C73G05 of Poles 64B600H0 3 64B600H01 Bus Spacing in Inches (mm) Continuous Current (Amperes) Pole Connector Type Center Outside 3.50 (88.9) D6G01 600D6G0 Bus Spacing in Inches (mm) Continuous Current (Amperes) Pole Connector Type Center Outside 3.50 (88.9) B78G0 41B77G01 of Poles, 3 08B64H01 Volume 4 Circuit Protection CA E February 01 V4-T-345

346 .3 L-Frame Panelboard Connecting Straps Pole Connector Type Continuous Current Center Outside (Amperes) B609G01 506C05G01 L-Frame Mounting Bracket of Poles M-Frame Panelboard Connecting Straps M-Frame Mounting Bracket 315C70H01 N-Frame Panelboard Connecting Straps N-Frame Mounting Bracket (Four Required) 315C70H01, 3 08B97H01 Bus Spacing in Inches (mm) Continuous Current (Amperes) Connector Type Pole Connector Type 3.50 (88.9) 800 Short 314C996G01 Bus Spacing in Inches (mm) Continuous Current (Amperes) Medium Long Connector Type 314C996G0 314C996G03 Pole Connector Type 3.50 (88.9) 100 Short 505C606G04 Medium Long 505C606G05 505C606G06 V4-T-346 Volume 4 Circuit Protection CA E February 01

347 .3 Handle Mechanisms Flex Shaft Breaker Frame Flexible Shaft Length in Feet (m) 3 (0.9) 4 (1.) 5 (1.5) 6 (1.8) 7 (.1) 8 (.4) 9 (.7) 10 (3.0) G 1 F0S03C F0S04C F0S05C F0S06C F F1S03C F1S04C F1S05C F1S06C F1S07C F1S08C F1S09C F1S10C F (dual) F1S03CD F1S04CD F1S05CD F1S06CD F1S07CD F1S08CD F1S09CD F1S10CD J FS03C FS04C FS05C FS06C FS07C FS08C FS09C FS10C K F3S03C F3S04C F3S05C F3S06C F3S07C F3S08C F3S09C F3S10C L and MDL F4S04C F4S05C F4S06C F4S10C N F5S04C F5S05C F5S06C F5S10C R F6S04 F6S05 F6S06 MD, MDS (old) F7S04 F7S05 F7S06 F7S10C 1 Suitable for GC/GD MCCB; not suitable for GMCP. Type 4/4X handle mechanisms are available. Add Suffix X to complete catalog number. Add Suffix I to complete catalog number for IEC handle. Original narrow handle design (No C Suffix) is available. Remove C from catalog number. When selecting the length of shaft, ensure minimum bending radius of 4 inches (101.6 mm) (5 inches, 1.7 mm for L-, N- and R-Frames) is maintained to operate properly. The standard method of shipment includes the mechanism preset at the factory; however, minor field adjustments may be required. Dual breakers operator available on F-Frame only. Only the F, J and K can mount LH and RH all other RH only. Volume 4 Circuit Protection CA E February 01 V4-T-347

348 .3 Type C371 Circuit Breaker or Motor Circuit Protector HMCP and EHD, FDB, FD, FDC, HFD, ED HMCP and HJD, JD, JDB, JDC HMCP and DK, HKD, KD, KDB HLD, LD, LDC MD, MDS (No MDL) HND, ND, NDC Handle Only Circuit Breaker Frame Size (Amperes) Channel Support Kit (Rod Not Supplied) For use to prevent bending of the operating handle mounting surface. This is especially useful when the operating handle is mounted on a channel in a multi-door enclosure. Connecting Rods 4 Frame Size 1 For increased maximum allowable depth, see connecting rods left. Dimensions shown are from panel flange surface. 3 Does not include handle. 4 Increase maximum allowable depth by 5 inches (17 mm). Variable Depth Mounting Range Min/Max 1 Operating Mechanism Only 3 Operating Mechanism w/ 4-Inch Handle For NEMA 1 1 EnclosureFor NEMA 4/4X Enclosure ( ) C371E C371E1 C371E ( ) C371F C371F5 C371F ( ) C371F C371F5 C371F ( ) C371G C371G5 C371G ( ) C371K C371K5 C371K ( ) C371K C371K5 C371K6 NEMA Enclosure Type Operating Handle Length R (101.6) C371H1 4/4X 4.00 (101.6) C371H 1-3R (15.4) C371H3 4/4X 6.00 (15.4) C371H R (101.6) C371H5 4/4X 4.00 (101.6) C371H6 1-3R (15.4) C371H7 4/4X 6.00 (15.4) C371H8 Amperes C371CS6 Application Disconnect switches (30, 60, 100, 00A sizes) Circuit breakers (150, 50, 400A sizes) Circuit breakers (600, 800, 100A sizes) C371CS1 C371CS1 C371CS V4-T-348 Volume 4 Circuit Protection CA E February 01

349 .3 Through-the-Door Handle Mechanisms Rotary Rotary Ordering Information Shaft Complete Separate Length Standard Breaker Inches (mm) 1 Handle Mechanism 3 Shaft 4 IEC IP65 56 IEC IP66 56 F-Frame 6.00 (15.4) HM1R CG5 6648C3G11 417B37G08 WHM1R06 WHM1R06X 1.00 (304.8) HM1R1 6648CG5 6648C3G11 417B37G05 WHM1R1 WHM1R1X (406.4) HM1R CG5 6648C3G11 417B37G06 WHM1R16 WHM1R16X 4.00 (609.6) HM1R4 6648CG5 6648C3G11 417B37G07 WHM1R4 WHM1R4X J-Frame 6.00 (15.4) HMR CG C3G1 417B37G08 WHMR06 WHMR06X 1.00 (304.8) HMR1 6648CG C3G1 417B37G05 WHMR1 WHMR1X (406.4) HMR CG C3G1 417B37G06 WHMR16 WHMR16X 4.00 (609.6) HMR4 6648CG C3G1 417B37G07 WHMR4 WHMR4X K-Frame 6.00 (15.4) HM3R CG C3G5 417B37G08 WHM3R06 WHM3R06X 1.00 (304.8) HM3R1 6648CG C3G5 417B37G05 WHM3R1 WHM3R1X (406.4) HM3R CG C3G5 417B37G06 WHM3R16 WHM3R16X 4.00 (609.6) HM3R4 6648CG C3G5 417B37G07 WHM3R4 WHM3R4X L- and MDL-Frame 6.00 (15.4) HM4R CG C3G19 417B37G08 WHM4R06 WHM4R06X 1.00 (304.8) HM4R1 6648CG C3G19 417B37G05 WHM4R1 WHM4R1X (406.4) HM4R CG C3G19 417B37G06 WHM4R16 WHM4R16X 4.00 (609.6) HM4R4 6648CG C3G19 417B37G07 WHM4R4 WHM4R4X MD/MDS 6.00 (15.4) HM7R CG1 6648C3G17 417B37G (304.8) HM7R1 6648CG1 6648C3G17 417B37G (406.4) HM7R CG1 6648C3G17 417B37G (609.6) HM7R4 6648CG1 6648C3G17 417B37G07 N-Frame 6.00 (15.4) HM5R CG1 6648C3G08 417B37G08 WHM5R06 WHM5R06X 1.00 (304.8) HM5R1 6648CG1 6648C3G08 417B37G05 WHM5R1 WHM5R1X (406.4) HM5R CG1 6648C3G08 417B37G06 WHM5R16 WHM5R16X 4.00 (609.6) HM5R4 6648CG1 6648C3G08 417B37G07 WHM5R4 WHM5R4X 1 Complete catalog number includes the standard handle, mechanism, shaft and support brace/bracket. Handle is designed suitable for NEMA Types 1, 3R and 1 enclosures. Use style number 6648CG03 for Type 4/4X handle or add X Suffix to complete catalog number. Handle is cast aluminum. 3 Breaker mechanism includes a shaft support bracket and its parts. Shaft is.50-inch (1.7 mm). 4 Longer shafts,16-inch (406.4 mm) and 4-inch (609.6 mm), include an adjustable support extension. 5 IEC handle mechanism supplied with metric thread mounting hardware. 6 Complete catalog number includes a handle, mechanism and shaft. Volume 4 Circuit Protection CA E February 01 V4-T-349

350 .3 Universal Rotary F-Frame Features Comparison of Rotary and Universal Rotary Handle Mechanism NEMA Enclosure Type International Handle Handle Indication: Markings Handle Rotary of Poles 1 3R 1 4/4X 1 Lock-Off ON/OFF TRIPPED/RESET ON (I) OFF (O) Material G-Frame Vari-Depth Handle Mechanism (Not Shown) For Use With Handle Color Complete Enclosure Breaker Black 1 Type 4/4X application requires special handle. See Ordering Information. All rotary handle mechanisms include a handle Lock Off to prevent turning the breaker ON while in the OFF position. 3 Only available as complete handle mechanism. Parts not sold separately. Available Handle Colors Handle Rotation Shaft Lengths (Inches) rotary X X X X X X X Metal Black 45 deg. 6, 1, 16, 4 Universal rotary X X X X X Molded plastic Yellow/Red/Black 90 deg. 6, 1, 4 Universal Rotary F-Frame Universal Rotary 3 Shaft Length Handle in Inches (mm) Color Complete G-Frame 6.00 (15.4) Black GHMVD06B 1.00 (304.8) Black GHMVD1B 6.00 (15.4) Red GHMVD06R 1.00 (304.8) Red GHMVD1R F-Frame 6.00 (15.4) Black FHMVD06B 1.00 (304.8) Black FHMVD1B 6.00 (15.4) Red FHMVD06R 1.00 (304.8) Red FHMVD1R J-Frame 6.00 (15.4) Black JHMVD06B 1.00 (304.8) Black JHMVD1B 6.00 (15.4) Red JHMVD06R 1.00 (304.8) Red JHMVD1R K-Frame 6.00 (15.4) Black KHMVD06B 1.00 (304.8) Black KHMVD1B 6.00 (15.4) Red KHMVD06R 1.00 (304.8) Red KHMVD1R L-Frame 6.00 (15.4) Black LHMVD06B 1.00 (304.8) Black LHMVD1B 6.00 (15.4) Red LHMVD06R 1.00 (304.8) Red LHMVD1R NEMA 1 GC/GHC/GD Black HRGCV11L NEMA 1 GC/GHC/GD Yellow HRGCV31L NEMA 3R/1/4X GC/GHC/GD Black HRGCV14L NEMA 3R/1/4X GC/GHC/GD Yellow HRGCV34L NEMA 1 GMCP Black HRGMV11L NEMA 1 GMCP Yellow HRGMV31L NEMA 3R/1/4X GMCP Black HRGMV14L NEMA 3R/1/4X GMCP Yellow HRGMV34L V4-T-350 Volume 4 Circuit Protection CA E February 01

351 .3 Direct (Close-Coupled) Handle Mechanisms Handle Extension Handle Extension Euro IEC Direct Frame G Direct 1 Handle Extension 3 Black Handle Red Handle F HMCC1B HMCC1R J HMCCB HMCCR K HMCC3B HMCC3R L and M HMCC4B HMCC4R N HMVD5B R HMVD6B Frame Black Handle Yellow Handle With Shroud Without Shroud With Shroud Without Shroud GD/GHC HRGCC1S HRGCC10 HRGCC3S HRGCC30 GMCP HRGMC1S HRGMC10 HRGMC3S HRGMC30 Frame Style J, K HEX3 L, M HEX4 N R HEX5 HEX6 1 Suitable for use on two- or three-pole G-Frame. Handle extension is not included with J, K, L, M and N-Frame breakers. It must be purchased separately. 3 Handle extension is included with breaker with R-Frame breakers. Volume 4 Circuit Protection CA E February 01 V4-T-351

352 .3 Type LFD Current Limiter The LFD current limiter is an accessory that bolts to the load end of a standard FDB or FD thermal-magnetic and electronic circuit breaker, providing 00,000A Type LFD Current Limiter Ground Fault Alarm Unit The ground fault alarm unit is a remotely mounted device with a combination indicating light/test button that will light when the breaker trips or alarms on ground fault. The ground fault alarm unit requires a separate 10 Vac power source to power the Ground Fault Alarm Unit Type LFD Current Limiter Circuit Breaker Amperes GF Alarm Unit IQ Energy Sentinel The IQ Energy Sentinel is a highly accurate, microprocessor-based, breaker-mounted device designed to monitor power and energy readings. It represents an alternative to watt meters, watt-hour meters, and watt demand meters. Key advantages include savings in space, lower installation costs, and remote monitoring capability. interrupting capacity at up to 600 Vac. LFD current limiters for thermal-magnetic circuit breakers are listed with Underwriters Laboratories under File E LFD3070R LFD3150R Description Ground fault alarm unit Face mounting bracket light and the internal relay, which has 1NO and 1NC contacts for remote indication. The ground fault alarm unit can be panel mounted for ordering with an optional face mounting bracket. For use on Digitrip 310 only, K- through N-Frame. GFAU 164C67G01 The IQ Energy Sentinel mounts on the load side of a F-Frame (150 ampere) circuit breaker. It can be applied on three-phase, four-wire systems, or singlephase, three-wire systems with voltage connected through Phases A and C. For more information, see Descriptive Bulletin Potential Transformer Module The potential transformer module is required for the Digitrip OPTIM 1050 to provide a voltage input to allow the trip unit to monitor power and energy as well as power factor. The potential transformer module is a 6 VA transformer with a primary voltage input of up to 600 volt Potential Transformer Module line to line. Three 0.1 ampere fuses are provided on the primary of the transformer and can be used for isolation purposes during dielectric testing. The device is normally panel mounted and can feed up to 16 OPTIM trip units. Potential Transformer Module Description Potential transformer module Solid-State (Electronic) Portable Test Kit The solid-state (electronic) 50/60 Hz power; it includes portable test kit provides complete instructions and verification of performance of test times for testing long all ratings of Digitrip 310 time, short time/ electronic trip units installed instantaneous operation in circuit breakers while in and optional ground fault service under varying load operation of the circuit and/or phase imbalance. The breaker. test kit operates on 10-volt, Portable Test Kit Description Solid-state (electronic) portable test kit DOPTMLN STK V4-T-35 Volume 4 Circuit Protection CA E February 01

353 .3 Breaker Interface Module (BIM) The Breaker Interface Module (BIM) is a panel mounted user interface device that is mounted on the front of an electrical assembly or at a remote location. The BIM is used to access, configure, test and display information for OPTIM trip units and other devices. The BIM consists of four display windows, eight function buttons, 18 LEDs, and a graphical time/current curve to provide breaker status, operational information, protection status and energy monitoring. A 4 Breaker Interface Module (BIM) Digitrip OPTIMizer The Digitrip OPTIMizer is a hand-held programmer that is used to access, configure, test and display information from OPTIM trip units. The OPTIMizer plugs into the front of an OPTIM trip unit via an eight-pin telephone jack and is powered by a nine-volt battery or the auxiliary power module. One highlighted feature is the Copy and Download commands. Setting up multiple OPTIM trips can be finished in minutes and with no errors. An Auxiliary Power Module connection provides a trip test when control power is not present at the breaker. The OPTIMizer is supplied as a standard package to include Digitrip OPTIMizer Vdc power supply is required to provide power to the BIM. This is supplied by the switchboard builder to Eaton s specifications. The BIM is a member of Eaton s PowerNet family of communicating devices that connects OPTIM trip units, Digitrip RMS 810/910 trip units and energy sentinels as a subnetwork system. The BIM can also be connected to a main network via a PONI module to PowerNet software. Breaker Interface Module (BIM) BIMII Digitrip OPTIMizer OPTIMizer standard package the programmer, the eightpin connection cord, battery and carrying case. The auxiliary power module is optional. Note: 4 Vdc Power Supply A 4 Vdc power supply is required for all Digitrip OPTIM trip units that are required to communicate either on the main Eaton PowerNet network or as a subnetwork to a BIM. The breaker s load is 45 ma of current. Typically one power supply is required per switchboard and can provide control power to a BIM and the OPTIM trip units. The 4 Vdc power supply should be an isolated high quality power supply with a CE label, and is normally provided by the switchboard manufacturer to Eaton s recommendations. Auxiliary Power Module The auxiliary power module is a power supply requiring 10 Vac input at 50 or 60 Hz that provides a 3 Vdc output. The auxiliary power module provides control power for testing an OPTIM trip unit when other means of control power is not available or for continuous OPTIMizer operation versus temporary with a battery. The auxiliary Auxiliary Power Module Auxiliary Power Module PRTBAPMDV power module connects into the top of the Digitrip OPTIMizer via a keyed receptacle. The main application for the auxiliary power module would be for the testing of a standalone non-communicating OPTIM breaker that ordinarily would not have control power. Cause of Trip Display/Remote Mount Cause of Trip Display The Cause of Trip Display can The DIGIVIEW version will be field-installed on any provide a local display at the Digitrip RMS 310+ trip unit. breaker without additional The device provides breaker wiring by connecting directly information through an LCD onto the trip unit. The screen, such as cause of trip, DIGIVIEWR06 version has a phrase current, ground 6 foot cable that allows users current and low loads. The to mount the display on the display is ideal for outside of an enclosure door troubleshooting common and connect to the trip unit trips such as ground fault, that is contained inside the long delay, and enclosure. instantaneous/short delay. Cause of Trip LED Module The Cause of Trip LED Module can be field-installed on any Digitrip RMS 310+ trip unit. The device provides a cause of trip indication via LED. The Cause of Trip LED Module connects directly onto the trip unit. When the Cause of Trip Display/Remote Mount Cause of Trip Display DIGIVIEW DIGIVIEWR06 Cause of Trip LED Module TRIP-LED breaker trips, the module indicates the cause of trip (long delay, short delay, instantaneous and ground) via LED indication. The module is reset after the breaker is reset. Volume 4 Circuit Protection CA E February 01 V4-T-353

354 .3 Accessories Flex Shaft Accessories (F- through R-Frame) NEMA 1 Safety Door Hardware for Flex Shaft and C371 1 Handle Length in Inches (mm) 4 (101.6) C361KJ4 6 (15.4) C361KJ6 Roller Latch 3 C361KR Rotary Accessories As an option, an auxiliary switch is offered so that the control panel builder may electrically indicate the status of the breaker. Auxiliary Switch 5108A61G01 This accessory would be mounted on the mechanism and comes with 4-inch (609.6 mm) pigtail leads. 1 Customer: Consult with box manufacturer for correct door hardware and any adapters required for assembly. The 1/4-inch x 1/-inch (6.35 x 1.7 mm) standard mill rectangular locking bar is not supplied with these kits. 3 Third roller latch for use with 4- or 6-inch (101.6 or 15.4 mm) handle when 3 point latching is required. V4-T-354 Volume 4 Circuit Protection CA E February 01

355 .3 Technical Data and Specifications Electrical Operator F-Frame Electrical (Solenoid) Operator Data 1 Voltage 3 Frequency Inrush Current Amperes Maximum Operating Time 10 50/60 Hz AC 10 5 cycles (80 ms) /60 Hz AC 5 5 cycles (80 ms) F-Frame Electrical (Motor) Operator Data 567 Voltage 3 Frequency 10 AC 4 DC 5 48 DC 3 15 DC Inrush Current Amperes J-Frame Electrical (Solenoid) Operator Data 1689 Voltage 3 Inrush Current Amperes Fuse Amperes Fuse Amperes 4 K-Frame Electrical (Solenoid) Operator Data 1689 Operating Voltage 3 Inrush Current Amperes Fuse Amperes L- and M-Frame Electrical (Motor) Operator Data 168j Operating Voltage 3 Inrush Current Amperes 10 AC AC AC 1 15 DC 1 4 DC 50 N-Frame Electrical (Motor) Operator Data 16kl Operating Voltage 3 Frequency Inrush Current Amperes 10 50/60 Hz /60 Hz /60 Hz /60 Hz 4 DC DC DC 1 Fuse Amperes R-Frame Electrical (Motor) Operator Data mnop Operating Voltage q Frequency 10 50/60 Hz /60 Hz 7 48 DC 53 4 DC 58 Motor Inrush Current Amperes 1 UL listed under UL File E The electrical operator design is endurance tested for 8000 electrical operations. 3 Tolerance: +10%, 15% of nominal voltage. 4 Use current-limiting type fuse where required. 5 UL listed under UL File E Frequency: 50/60 Hz. 7 Maximum operating time: 3 seconds max. Operator is an intermittent duty device. The safe duty cycle (OFF to ON to OFF) should not exceed one per minute. 8 The electrical operator design has been endurance tested for 6000 electrical operations. 9 Maximum operating time: 5 cycles (80 ms). j Maximum operating time: 1 cycles. k The electrical operator design has been endurance tested for,500 electrical operations. l Maximum operating time: 1 cycles max. Operator is an intermittent duty device. The safe duty cycle (OFF to ON to OFF) should not exceed one per minute. m Operator is an intermittent duty service. The safe duty cycle (OFF to ON to OFF) should not exceed one per minute. n Electric Operating time at rated voltage; (a) To turn breaker ON 1/ second max. (b) To turn breaker OFF 1/ second max. o Motor operating temperature; Class A temperature limits apply. p A minimum 1 kva power source is recommended for motor operation. q Applied voltage should be no less than 85% or no more than 110% of rated voltage. For OPTIM trip, OPEOPCK kit required. Volume 4 Circuit Protection CA E February 01 V4-T-355

356 .3 Dimensions Approximate Dimensions in Inches (mm) Rear Connecting Studs F-Frame 1 Stud Ampere F-Frame Note 1 Not UL listed. Stud Panel Thickness Tube Length Tube Dimensions A B C D E F For 15 to 100 Ampere Circuit Breakers 100A short 451D874G (5.4) 1.06 (6.9) 3B9446H (9.1) 0.31 (7.9) A short 451D874G (17.5 to 3.8) 1.38 (34.9) 3B9446H (9.1) 0.31 (7.9) A short 451D874G (9.5 to 15.9) 1.69 (4.9) 3B9446H 3.63 (9.1) 0.31 (7.9) A short 451D874G (6.4 to 7.9).00 (50.8) 3B9446H (9.1) 0.31 (7.9) A long 451D874G (5.4) 3.44 (87.3) 3B9446H (155.6) 0.31 (7.9) A long 451D874G (17.5 to 3.8) 3.75 (95.) 3B9446H (155.6) 0.31 (7.9) A long 451D874G (9.5 to 15.9) 4.06 (103.1) 3B9446H (155.6) 0.31 (7.9) A long 451D874G (6.4 to 7.9) 4.38 (111.3) 3B9446H (155.6) 0.31 (7.9) 18 For 110 to 5 Ampere Circuit Breakers 5A short 374D883G (5.4) 1.06 (6.9) 374D883H (108.0) 0.44 (11.1) 14 5A short 374D883G (17.5 to 3.8) 1.38 (34.9) 374D883H (108.0) 0.44 (11.1) 14 5A short 374D883G (9.5 to 15.9) 1.69 (4.9) 374D883H (108.0) 0.44 (11.1) 14 5A short 374D883G (6.4 to 7.9).00 (50.8) 374D883H (108.0) 0.44 (11.1) 14 5A long 374D883G (5.4) 3.44 (87.3) 374D883H (190.5) 0.44 (11.1) 14 5A long 374D883G (17.5 to 3.8) 3.75 (95.) 374D883H (190.5) 0.44 (11.1) 14 5A long 374D883G (9.5 to 15.9) 4.06 (103.1) 374D883H (190.5) 0.44 (11.1) 14 5A long 374D883G (6.4 to 7.9) 4.38 (111.3) 374D883H (190.5) 0.44 (11.1) 14 Mounting Panel Breaker Mounting Surface.75 (19.1).06 (1.5) A B E C D F Thread V4-T-356 Volume 4 Circuit Protection CA E February 01

357 .3 Approximate Dimensions in Inches (mm) J-Frame Stud Ampere K-Frame 1 Stud Ampere Note 1 Not UL listed. Stud Panel Thickness Tube Length Tube A B C 50A short 5010D3G ( ) 0.84 (1.4) 456D983H05 50A short 5010D3G ( ) 1.09 (7.7) 456D983H06 50A short 5010D3G ( ) 1.03 (6.) 456D983H07 50A long 5010D3G ( ) 3.88 (98.6) 5010D3H05 50A long 5010D3G ( ) 4.13 (104.9) 5010D3H06 50A long 5010D3G ( ) 4.38 (111.3) 5010D3H (7.9) 18 Thread Do Not Use More Than 10 Ft Lbs Torque to Tighten Nuts Breaker Mounting Panel Stud 1.59 (40.4) 0.59 (15.0) 0.06 (1.5) A 0.03 (0.7) B 3.63 (9.) 6.66 (169.) C 0.50 (1.7) 13 Thread Panel Thickness Tube Length Standard Tube Dimensions A B C D E F 400A short 664C14G ( ) 0.84 (1.3) 313C909H (93.0) ( ) 400A short 664C14G ( ) 1.09 (7.69) 313C909H18 400A short 664C14G ( ) 1.03 (6.16) 313C909H19 400A long 664C14G ( ) 3.78 (96.0) 313C909H0 400A long 664C14G ( ) 4.03 (10.4) 313C909H (167.1) 400A long 664C14G ( ) 4.8 (108.7) 313C909H Mounting Panel Breaker Mounting Surface 0.06 (1.5) 1.67 (4.4) A B E C D F Thread Volume 4 Circuit Protection CA E February 01 V4-T-357

358 .3 Approximate Dimensions in Inches (mm) Flange Mounted Handle Mechanisms Type C371 Circuit Breaker or Motor Circuit Protector HMCP and EHD, FDB, FD, FDC, HFD, ED HMCP and HJD, JD, JDB, JDC HMCP and DK, HKD, KD, KDB HLD, LD, LDC MD, MDS (No MDL) HND, ND, NDC Handle Only Circuit Breaker Frame Size (Amperes) Frame Size NEMA Enclosure Type Variable Depth Mounting Range Min/Max 1 Operating Mechanism Only Operating Mechanism w/ 4-inch Handle For NEMA 1 1 Enclosure ( ) C371E C371E1 C371E ( ) C371F C371F5 C371F ( ) C371F C371F5 C371F ( ) C371G C371G5 C371G ( ) C371K C371K5 C371K ( ) C371K C371K5 C371K6 Operating Handle Length R (101.6) C371H1 4/4X 4.00 (101.6) C371H 1-3R (15.4) C371H3 4/4X 6.00 (15.4) C371H R (101.6) C371H5 4/4X 4.00 (101.6) C371H6 1-3R (15.4) C371H7 4/4X 6.00 (15.4) C371H8 For NEMA 4/4X Enclosure V4-T-358 Volume 4 Circuit Protection CA E February 01

359 .3 Approximate Dimensions in Inches (mm) L-Frame Stud Length (A) M-Frame Stud Ampere N-Frame Stud Ampere Stud 5.47 (138.9) 314C960G (0.4) 314C960G (65.9) 314C960G09.44 (11.) Circuit Breaker Insulating Panel Diameter and Thread Extension Back of Breaker Stud (1.7) (93.0) 314C960G (19.1) (150.1) 314C960G (19.1) (13.6) 314C960G (19.1) (77.0) 314C960G (5.4) (150.1) 314C960G (5.4) (13.6) 314C960G (5.4) (77.0) 314C960G (8.7) (150.1) 314C960G (8.7) (13.6) 314C960G (8.7) (77.0) 314C960G1 Diameter and Thread A Insulators Washer Nut Rear Connecting Stud Extension Back of Breaker Stud (8.7) (139.7) 63BG (8.7) (03.) 63BG (8.7) (66.7) 63BG (31.8) (139.7) 373B375G (31.8) (66.7) 373B375G03 Volume 4 Circuit Protection CA E February 01 V4-T-359

360 .4 Universal Gi-, Fi, Ji-, Ki-, Li-Frames Universal Molded Case Circuit Breaker Family Universal When higher interrupting ratings are not required. Product Overview Gi-, Fi, Ji-, Ki-, Li-Frames Amperes IEC Vac NEMA 480 Vac Eaton s universal molded case circuit breakers, in one-, two- and three-pole configurations, are designed to provide an economical alternative for applications that do not require the higher interrupting ratings and modular accessories provided by Series G breakers. As with other members of Eaton s family of molded case circuit breakers, universal breakers provide high quality, reliability, unmatched performance, and outstanding value. For NEMA and IEC Standard Voltage Systems These breakers have been designated universal because they can be applied to both NEMA and IEC standard voltage systems: 77/ 480 Vac, 0/380 Vac and 40/415 Vac at 60 or 50 Hz. Eaton s universal breakers are rated from amperes and are available in five frame sizes. Each frame size has the same compact outside dimensions as breakers. Additionally, universal breakers are suitable for 50 C applications and have been rigorously tested to the IEC 947- standard. They are assembled in an ISO certified facility. Contents Description Product Selection Guide Electrical Characteristics Features Base Mounting Hardware Line and Load Termination Options Optional Line and Load Terminals Selection Product Selection Accessories Technical Data and Specifications Gi and Fi Time-Current Curves Ji, Ki Time-Current Curves Li Time-Current Curves Frame Weights Approximate Lbs (kg) Learn Online Drawings Online Trip Units and Terminals Universal breakers are provided with factory-sealed thermal-magnetic trip units. The Gi-Frame breaker (15 15 amperes, UL listed up to 60A; 70 15A are IEC only) includes line and load terminals with breaker mounting hardware. Frames Fi (15 5 amperes), Ji (50 amperes), Ki ( amperes) and Li ( amperes) include line and load end caps with termination hardware installed. The Li-Frame ( amperes) is fitted with both line and load bus bar extensions that use standard hardware. A full complement of end cap kit terminals is available to customize universal breakers as required. Page V4-T-361 V4-T-361 V4-T-363 V4-T-363 V4-T-363 V4-T-363 V4-T-363 V4-T-364 V4-T-365 V4-T-366 V4-T-367 V4-T-367 V4-T-369 V4-T-370 V4-T-373 External Accessories Universal breakers use the same external accessories as breakers: handle mechanisms, motor operators, lock-off devices, bus bar extensions and multiple terminal arrangements. V4-T-360 Volume 4 Circuit Protection CA E February 01

361 Universal.4 Product Selection Guide Electrical Characteristics Frames Gi15 Fi5 1 Ji50 Eaton s Universal Molded Case Circuit Breakers Electrical Characteristics Frame (690V) / Maximum Rated Amperes Interrupting Gi15 Gi15 Fi100 Fi160 Fi5 Ji50 IEC Vac I cu /I cs 18/5 5/7 5/13 35/18 35/18 35/ Vac / cu /I cs 18/5 18/9 5/13 5/13 5/ Vac I cu /I cs 14/7 0/10 0/10 0/10 NEMA 40 Vac /480 Vac of Poles 1, 3, 3, 3, 3 3 Continuous Ampere 50 (40 C) 1 Fi-Frame currently UL listed up to 5A. Gi 15 maximum voltage rating or Ui is 600 Vac. 3 Gi UL listed. Gi-Frames above 60A are not UL listed. 15, 0, 30, 40, 60 3, 70, 80, 100, 15 15, 0, 30, 40, 60, 70, 80, 100, 15 15, 0, 30, 40, 60, 70, 80, , 150, , 00, 5 Volume 4 Circuit Protection CA E February 01 V4-T-361

362 .4 Universal Electrical Characteristics, continued Frames Ki400 Li630 Eaton s Universal Molded Case Circuit Breakers Electrical Characteristics Frame (690V) / Maximum Rated Amperes Interrupting Ki400 Li630 IEC 0 40 Vac I cu /I cs 35/18 35/ Vac / cu /I cs 5/13 5/ Vac I cu /I cs 0/10 0/10 NEMA 40 Vac /480 Vac 0 0 of Poles 3 3 Continuous Ampere (40 C) Note 1 Li500 and Li600 are UL listed; Li630 is not UL listed. 300, 350, , 600 1, 630 V4-T-36 Volume 4 Circuit Protection CA E February 01

363 Universal.4 Features Base Mounting Hardware Metric base mounting hardware is included with each breaker. English mounting hardware is available for field installation only. Line and Load Terminals Both line and load terminals are included with Gi-Frame universal breakers. Options Optional Line and Load Terminals Compression terminals with hardware are available for a wide range of conductors. Field installation only. Base Mounting Hardware Frames Line and Load Termination Optional Line and Load Terminals English Metric Gi-Frame 1 Fi-Frame BMH1 BMH1M Ji-Frame BMH BMHM Ki-Frame BMH3 BMH3M Li-Frame BMH4 BMH4M Breaker Termination Type Awg Wire Range Metric Wire Range (mm) Wire Type Bolt Size English Bolt Size Metric Torque Lb In Torque Nm 1 Base mounting hardware, applicable to both NEMA and IEC applications, is included with Gi-Frame breakers. A separate catalog number is not required. Package of three terminals. Gi Wire #14 1/ Cu only Included Fi End cap 10 3 M Ji End cap 5/16 M Ki End cap 5/16 M Li 630A End cap 5/16 M Breaker Awg Wire Range Metric Wire Range (mm) Wire Type Torque Lb In Torque Nm Fi #14 # Cu/Al T100FB #8 10 Cu/Al T100FB #6 # Cu/Al T100FB #3 4/ Cu/Al T100FB #3 4/ Cu only T150FB #4 4/ Cu/Al TA5FB # Cu/Al TA5FDK Ji Cu/Al TA50KB Ki (1) (1) Cu/Al TA350K 3/0 50 () () Cu/Al TA400K Li 630A () () Cu/Al TA60LD () () Cu/Al TA603LDK Volume 4 Circuit Protection CA E February 01 V4-T-363

364 .4 Universal Selection Frame Size Gi = Gi-Frame Fi = Fi-Frame Ji = Ji-Frame Ki = Ki-Frame Li = Li-Frame Gi-Frame 1 = Single-pole = Two-pole 3 = Three-pole Fi-Frame = Two-pole 3 = Three-pole of Poles Ji-Frame 3 = Three-pole Ki-Frame 3 = Three-pole G i 070 L Li-Frame 3 = Three-pole Gi-Frame 015 = 15A 00 = 0A 030 = 30A 040 = 40A 050 = 50A 060 = 60A 070 = 70A 080 = 80A 100 = 100A 15 = 15A Terminals L = Line and load terminals Fi-Frame 015 = 15A 00 = 0A 030 = 30A 040 = 40A 050 = 50A 060 = 60A 070 = 70A 080 = 80A 100 =100A 15 = 15A 150 = 150A 160 = 160A 175 = 175A 00 = 00A 5 = 5A Ampere Ji-Frame 50 = 50A Ki-Frame 300 = 300A 350 = 350A 400 = 400A Li-Frame 500 = 500A 600 = 600A 630 = 630A 700 = 700A 800W = 800A V4-T-364 Volume 4 Circuit Protection CA E February 01

365 Universal.4 Product Selection s When ordering universal breakers, use the appropriate catalog numbers given below. Gi 15 Fi 5 Gi-Frame/15 15 Amperes Frames/ Ampere Fi-Frame/15 5 Amperes Single-Pole Two-Pole Three-Pole Gi15/15 15 amperes Gi1015 Gi015 Gi3015 Gi100 Gi00 Gi300 Gi1030 Gi030 Gi3030 Gi1040 Gi040 Gi3040 Gi1050 Gi050 Gi3050 Gi1060 Gi060 Gi3060 Gi1070 Gi070 Gi3070 Gi1080 Gi080 Gi3080 Gi1100 Gi100 Gi3100 Gi115 Gi15 Gi315 Frames/ Ampere Single-Pole Two-Pole Three-Pole Fi100/ amperes Fi015L Fi3015L Fi00L Fi300L Fi030L Fi3030L Fi040L Fi3040L Fi050L Fi3050L Fi060L Fi3060L Fi070L Fi3070L Fi080L Fi3080L Fi100L Fi3100L Fi160/ amperes Fi15L Fi315L Fi150L Fi3150L Fi160L Fi3160L Fi5/175 5 amperes Fi175L Fi3175L Fi00L Fi300L Fi5L Fi35L Volume 4 Circuit Protection CA E February 01 V4-T-365

366 .4 Universal Ji 50 Ki 400 Li 630 Accessories Ji50/50 Amperes Frames/ Ampere End Cap Accessory Kit End caps for line and load conductor termination are optional with each breaker. End caps secure the conductor with a ring-type connector. The kit includes one end cap, three cap screws, three nuts and three lock washers. Ki-Frame/ Amperes Li-Frame/ Amperes End Cap Accessory Kit Single-Pole Two-Pole Three-Pole Ji50/50 amperes Ji350L Frames/ Ampere Single-Pole Two-Pole Three-Pole Ki400/ amperes Ki3300L Frames/ Ampere Ki3350L Ki3400L Single-Pole Two-Pole Three-Pole Li630/ amperes Li3500 Li3600 Li3630 V4-T-366 Volume 4 Circuit Protection CA E February 01

367 Universal.4 Technical Data and Specifications Gi and Fi Time-Current Curves Type Gi15 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 415 at 50/60 Hz Two- and three-pole Breaker Continuous Amperes Single-Pole Instantaneous Trip Amperes For NEMA interrupting ratings, see Electrical Characteristics on Pages V4-T-361 and V4-T-36 Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC 18 5 Breaker Continuous Amperes Two-Pole In Series Instantaneous Trip Amperes TIME IN SECONDS Fixed Inverse-Time 500 Overcurrent Release Fixed 0 Electromagnetic Release Total Clearing Time Interrupting determines end of curve CURRENT IN MULTIPLES OF / n Type Fi100 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC x l n AC AC DC 0 10 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Fixed 30 Electromagnetic 0 Release 10 Total 5 Clearing 3 Time Interrupting.05 determines.03.0 end of curve CURRENT IN MULTIPLES OF / n Volume 4 Circuit Protection CA E February 01 V4-T-367

368 .4 Universal Fi Time-Current Curves, continued Type Fi160 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs 15 8 x l n 0 40 AC x l n AC x l n 440 AC DC Fixed Inverse-Time 000 Overcurrent Release Fixed 30 Electromagnetic 0 Release 10 Total 5 3 Clearing Time Interrupting.05 determines.03.0 end of curve TIME IN SECONDS CURRENT IN MULTIPLES OF / n Type Fi5 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Fixed Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Two- and three-pole NEMA interrupting ratings 14 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC DC 10 5 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Fixed 50 Electromagnetic 30 Release 0 10 Total 5 3 Clearing Time Interrupting.03.0 determines.01 end of curve CURRENT IN MULTIPLES OF / n V4-T-368 Volume 4 Circuit Protection CA E February 01

369 Universal.4 Ji, Ki Time-Current Curves Type Ji50 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 0 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC DC 10 5 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Adjustable Electromagnetic Release Total Clearing Time Interrupting.03.0 determines.01 end of curve CURRENT IN MULTIPLES OF / n Type Ki400 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 0 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC DC 10 5 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Adjustable 300 Electromagnetic 00 Release Total 3 Clearing Time Interrupting.03.0 determines end of curve CURRENT IN MULTIPLES OF / n Volume 4 Circuit Protection CA E February 01 V4-T-369

370 .4 Universal Li Time-Current Curves Type Li630 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 0 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC DC 10 5 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Adjustable Electromagnetic Release Total Clearing Time Interrupting determines end of curve CURRENT IN MULTIPLES OF / n Type Li800 Molded Case Circuit Breakers Thermal-Magnetic Trip, Fixed Thermal-Adjustable Magnetic Maximum Vac: 440 at 50/60 Hz Maximum Vdc: 50 Breaker Continuous Amperes Instantaneous Trip Amperes Three-pole NEMA interrupting ratings 30 ka at 480 Vac Interrupting s (IEC 947-) rms Symmetrical Amperes (ka) Volts I cu I cs AC AC AC DC 10 5 TIME IN SECONDS Fixed Inverse-Time Overcurrent Release Adjustable Electromagnetic Release Total Clearing Time Interrupting determines end of curve CURRENT IN MULTIPLES OF / n V4-T-370 Volume 4 Circuit Protection CA E February 01

371 Universal.4 Typical Specifications for Universal Electrical circuits shall be protected by molded case circuit breakers as manufactured by Eaton. Each pole of the one-, two- and three-pole circuit breakers shall provide complete circuit overcurrrent protection by having inverse time and instantaneous tripping characteristics and, where applicable, be current limiting. The circuit breakers shall be operated by a toggle-type handle and have a quickmake, quick-break, overcenter switching mechanism that is mechanically trip-free from the handle so that the contacts cannot be closed against short circuit currents. Tripping due to overload or short circuits shall be clearly indicated by the position of the handle. The ON and OFF positions shall be clearly marked on the cover of the circuit breaker (F-Frame and larger) along with the international symbols I for ON and O for OFF on the handle, providing positive indication of the circuit breaker contact position. Additionally, a color-coded indication of the circuit breaker contact position shall be provided for the F-Frame and have red for ON, green for OFF, and white for TRIPPED. An easily accessible Push-To-Trip button for mechanically exercising the trip unit shall be provided on the cover of each circuit breaker (F-Frame and larger). All poles of a multi-pole circuit breaker shall be so constructed as to ensure simultaneous open, close and trip operations. Molded case circuit breakers shall be of the inverse time and instantaneous trip type as provided by thermalmagnetic trip elements. Non-interchangeable trip circuit breakers shall be factory sealed to prevent tampering. Ampere ratings shall be clearly visible from the front of the circuit breaker. Contacts shall be non-welding silver alloy. Arc extinction shall be accomplished by means of DE-ION arc extinguishers, consisting of metal grids mounted in an insulating support. Circuit breakers shall be completely enclosed in a high-strength glasspolyester case. The minimum interrupting ratings of the circuit breakers shall be at least equal to the available short circuit current at the line terminals. The circuit breakers can be applied in series rated applications and subject to test data verification. Circuit breakers in frame sizes 100 amperes through 800 amperes shall be equipped with thermalmagnetic trip units. Circuit breakers in the 15 ampere frame size shall be supplied in one-, twoand three-pole models, as specified on the drawings. Circuit breakers in ratings of 5 ampere frame size shall be supplied in two- or threepoles as specified on the drawings. The 50 amperes through 800 amperes frame sizes shall be supplied as three-pole models only as specified on the drawings. Electrical operators for circuit breakers of the 400 ampere frame size and below shall be of the solenoid type with maximum five-cycle closing characteristics. Electrical operators for circuit breaker frame sizes 630 amperes through 800 amperes shall be of the motor driven type. All electrical operators shall be cover mounted. Circuit breakers shall be provided with uniformly designed nameplates to clearly indicate the type, rating, listing/recognition/ certification marks, accessory details and other information defined in IEC Volume 4 Circuit Protection CA E February 01 V4-T-371

372 .4 Universal Dimensions Approximate Dimensions in Inches (mm) All dimensions are provided for guidance and should not be used for construction purposes unless approved. Contact Eaton for detailed outline drawings. Gi, Fi, Ji, Ki Universal Frame Front, Side View and Front Cover Cutout Front View Side View Front Cover Cutout ON OFF B C L Handle D A Gi, Fi, Ji, Ki Universal Frame Frame A B C D E F G H I J K L M Gi 4.87 (13.8) 3.00 (76.).63 (66.7).91 (73.8) NA 3.00 (76.) NA. (56.3) 1.50 (38.1) NA 1.50 (38.1) NA 0.00 (0.0) Fi 6.00 (15.4) 4.13 (104.8) 3.37 (85.7) 3.63 (9.1) NA 1.19 (30.) NA.91 (73.8).3 (58.8) NA 0.59 (15.1) NA 0.5 (6.4) Ji (54.0) 4.13 (104.8) 4.06 (103.) 5.79 (147.) 3.50 (88.9) 1.56 (39.7) 0.87 (.) 3.94 (100.0).9 (74.) 0.7 (18.) 0.78 (19.8) 1.75 (44.5) 0.34 (8.7) Ki (57.) 5.49 (139.5) 4.06 (103.) 5.77 (146.5) 4.78 (11.5).63 (66.7) 1.5 (31.8) 3.75 (95.3).9 (74.) 0.81 (0.6) 1.31 (33.4).39 (60.7) 0.34 (8.7) C M H C L Handle G F K C L Breaker E L I J V4-T-37 Volume 4 Circuit Protection CA E February 01

373 Universal.4 Approximate Dimensions in Inches (mm) Li 630 (Bus Extensions Not Included) Li 800 Universal Frame Front and Side View 0.0 (5.1) R 0.44 (11.1) Diameter Li 630, Li 800 Universal Frame Frame A B C D E F G H I J K L M Li (73.1) 8.5 (09.6) 4.06 (103.) 5.61 (14.6) 7.8 (184.9) 3.44 (87.3) 1.50 (38.1) 3.8 (83.3) 1.33 (33.7) 0.97 (4.6) 1.7 (43.7) 3.64 (9.5) 0.5 (6.4) Li (184.9) 3.44 (87.3) 1.50 (38.1) 3.8 (83.3) 1.33 (33.7) 0.97 (4.6) 1.7 (43.7) 3.64 (9.5) 0.5 (6.4) Frame Weights Approximate Lbs (kg) Frame Gi15 Fi5 Ji50 Ki400 Li630 Li800 Single-pole 0.75 (0.34) Two-pole 1.0 (0.6) 3.0 (1.8) Three-pole 1.33 (0.8) 4.5 (.4) 1.5 (5.) 13.4 (6.1) 1.5 (9.4) 4.9 (11.3) Note 1 See drawing above. Front View 8.5 (09.6) 5.50 (139.7).75 (69.9) 1.75 (44.5) 5.61 (14.6) (73.1) 1.7 (33.0) (333.0) (381.0) (406.4) Side View 4.06 (103.) 3.81 (96.8) 0.39 (10.0) 0.90 (.9) 0.97 (4.6) Volume 4 Circuit Protection CA E February 01 V4-T-373

374 .5 Specialty Breakers Engine Generator Circuit Breakers Contents Description Engine Generator Circuit Breakers Selection Product Selection Accessories Selection Guide and Ordering Information Options and Accessories Technical Data and Specifications Dimensions and Weights Direct Current Circuit Breakers E Mining Service Circuit Breakers Classic Mining Breakers Add-On Ground Fault Protection Type GFR..... PVGard Solar Circuit Breakers Learn Online Drawings Online Page V4-T-375 V4-T-376 V4-T-378 V4-T-378 V4-T-379 V4-T-379 V4-T-380 V4-T-393 V4-T-416 V4-T-430 V4-T-433 Engine Generator Circuit Breakers Product Description Eaton s engine generator molded case circuit breakers are designed specifically for application on diesel engine powered standby generators where high interrupting circuit breakers are not required. The JG through NG breakers are equipped with a special trip unit, that includes standard thermal (overload) protection and special low magnetic pickup range (FG includes a fixed thermalmagnetic pickup). The standard thermal trip unit provides overload protection for conductors per the National Electrical Code. The low magnetic pickup range is approximately two to five times the continuous rating and provides closer low-level short-circuit protection when applied on generators that have very low short-circuit capacity. This combination allows the user to customize the breaker to the generator output. Application Description Engine generator circuit breakers are suitable for reverse feed application. Standards and Certifications Engine generator molded case circuit breakers are designed to conform with the following standards: Underwriters Laboratories Standard UL 489, Molded Case Circuit Breakers and Circuit Breaker Enclosures File E7819 Canadian Standards Association Standard C. No. 5, Service Entrance and Branch Circuit Breakers International Electrotechnical Commission Recommendations IEC 947-, Circuit Breakers Conformance with these standards satisfies most local and international codes, assuming user acceptability and simplified application. V4-T-374 Volume 4 Circuit Protection CA E February 01

375 Specialty Breakers.5 Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers. FG breakers include both line and load side terminals Circuit Breakers FG, JG, KG, LG and NG JG, KG, LG and NG breakers with W catalog number suffix do not include any terminals JG, KG, LG and NG breakers without W catalog number suffix include both line and load terminals Frame FG JG KG LG NG of Poles 3 = Three-pole FG W Contact Eaton for additional ratings and internal/external accessories Reverse feed Trip Amperes Suffix W = Without terminals Volume 4 Circuit Protection CA E February 01 V4-T-375

376 .5 Specialty Breakers Product Selection The following table lists FG through NG engine generator breakers with the maximum generator kva and kw rating. Engine generator breakers are applied at 115% of the Thermal-Magnetic Magnetic Pickup Range Maximum Generator 60 Hz generator full load current rating (FLA). The maximum kw rating is based on threephase generators at 80% power factor. 1 Breaker continuous current is based on 115% of the generator full load ampere rating. Based on three-phase generators at 80% power factor. 3 FG, JG, KG include thermal-magnetic trip units, LG and NG include electronic trip units. 4 Breaker includes line and load terminals. 5 Without terminals. The following catalog numbers have center tap studs for dual voltage applications: JG3070CT, JG3100CT, JG315CT, KG3175CT, LG3300CTW. Engine Generator Breaker 3 40 Vac 480 Vac 600 Vac kva 1 kw kva 1 kw kva 1 kw Fixed FG Fixed FG300 4 Fixed FG305 4 Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG Fixed FG315 4 Fixed FG Fixed FG Fixed FG300 4 Fixed FG JG3175W JG JG300W JG JG35W JG JG350W JG KG3300W KG KG3350W KG KG V4-T-376 Volume 4 Circuit Protection CA E February 01

377 Specialty Breakers.5 Electronic Magnetic Pickup Range Maximum Generator 60 Hz 1 Breaker continuous current is based on 115% of the generator full load ampere rating. Based on three-phase generators at 80% power factor. 3 FG, JG, KG include thermal-magnetic trip units, LG and NG include electronic trip units. 4 Breaker includes line and load terminals. The following catalog numbers have center tap studs for dual voltage applications: JG3070CT, JG3100CT, JG315CT, KG3175CT, LG3300CTW. Engine Generator Breaker 3 40 Vac 480 Vac 600 Vac kva 1 kw kva 1 kw kva 1 kw LG LG LG NG NG NG NG NG Volume 4 Circuit Protection CA E February 01 V4-T-377

378 .5 Specialty Breakers Accessories Selection Guide and Ordering Information Enclosures Type 1 General Purpose Surface or flush mounting ampere range 600 Vac, 500 Vdc Type 1 enclosed breakers are designed for use in commercial buildings, apartment buildings and other areas where a general purpose enclosure is applicable. The breaker is front operable and is capable of being padlocked in either the ON or OFF position. s through 100 amperes are listed with Underwriters Laboratories as approved for service entrance application. Both surface and flush mounted enclosures are available. Type 3R Rainproof Surface Mounting Interchangeable hubs (through 400 amperes) ampere range 600 Vac, 500 Vdc This general purpose outdoor service center employs a circuit breaker inside a weatherproof sheet steel breaker enclosure to serve Enclosure Selection Data Breaker Frame Amperes FG 15 5 JG KG LG NG Enclosure Type Class Type 1 Type 3R Type 1 Type 1 Type 3R Type 1 Type 1 Type 3R Type 1 Type 1 Type 3R Type 1 Type 1 Type 3R Type 1 as a main disconnect and protective device for feeder circuits. s through 100 amperes are listed by Underwriters Laboratories as suitable for service entrance application. Type 1 Dustproof Surface Mounting No knockouts or other openings ampere range 600 Vac, 500 Vdc The Type 1 enclosure is designed in line with specifications for special industry applications where unusually severe conditions involving oil, coolant, dust and other foreign materials exist in the operating atmosphere. The handle padlocks in the OFF position and the cover is interlocked with the handle mechanism to prevent opening the cover with the circuit breaker in the ON position. s through 100 amperes are listed by Underwriters Laboratories as suitable for service entrance application. SFDN5 RFDN5 JFDN5 SJDN50 RJDN50 JJDN50 SKDN400 RKDN400 JKDN400 SLDN600 RLDN600 JLDN600 SNDN100 RNDN100 JNDN100 Options and Accessories Standard Terminals Breaker Frame Max. Amp Neutral Kits, Insulated and Groundable Internal Accessories Auxiliary Switch AWG Wire Range Metric Wire Range mm FG / T100FB 1 FG / TA5FD 1 JG kcmil TA50KB KG kcmil TA350K KG 400 3/0 50 kcmil () TA400K 1 LG kcmil () TA603LDK NG kcmil () TA700NB1 NG /0 400 kcmil (3) TA1000NB1 NG 100 4/0 500 kcmil (4) TA100NB1 Max. Enclosure (Amperes) Main Lug Size Cu/Al Ground Lug Size Cu/Al 100 (1) 14 1/0 (1) 14 1/0 INK (1) kcmil (1) kcmil INK (1) kcmil or (1) kcmil INK400 () 1/0 50 kcmil 600 () kcmil (1) kcmil INK (3) 1/0 to 750 kcmil or (4) 1/0 to 750 kcmil Breaker Frame Factory Mounted 1A-1B Field Kit (1) 6 50 kcmil INK100 Factory Mounted A-B Field Kit FG 3 A06 A1X1PK A13 AX1RPK JG A06 A1XPK A13 AXPK KG A06 A1X3PK A13 AX3PK LG A06 A1X4PK A13 AX4PK NG A06 A1X5PK A13 AX5PK Shunt Trip Breaker Factory Field Kit Frame Mounted FG Vdc S0 SNT1LP03K JG 1 4 Vdc S4 SNTP04K KG 1 4 Vdc S4 SNT3P04K LG 1 4 Vdc S0 SNT4LP03K NG 1 4 Vdc S0 SNT5LP03K 1 Package of three terminals. Other accessories are available. Same as standard frame breakers. 3 Field installation on the FG Frame is not UL listed. V4-T-378 Volume 4 Circuit Protection CA E February 01

379 Specialty Breakers.5 Technical Data and Specifications UL 489 Interrupting Capacity s Volts AC (50/60 Hz) 40 18, , ,000 IEC 947- Interrupting Capacity s Volts AC (50/60 Hz) Dimensions and Weights Approximate Dimensions in Inches (mm) Enclosure Selection Data Interrupting Capacity (Symmetrical Amperes) Interrupting Capacity (Symmetrical Amperes) 0, 40 18,000/ 9, , ,000/ 7, , ,000/ 9,000 14,000/ 7,000 10,000/5,000 Breaker Frame Amperes FG 15 5 JG KG LG NG Enclosure Type Class A B C D E Approx. Weight Lbs (kg) Type 1 Surface Mounted Type 3R Rainproof Type 1, 1K Dustproof D E B Conduit Sizes, Inches Type (590.6) 8.41 (13.6) 6.8 (159.5) (476.3) 1.0 (30.5) 15 (7) 0.5, 0.50, 0.75, 1, 1.5, 1.50,,.50 SFDN5 Type 3R 5.66 (651.8) 8.84 (4.7) 9.31 (36.5) 4.8 (616.7) 1.70 (43.) 19 (9) 0.5, 0.50, 0.75, 1, 1.5, 1.50,,.50 RFDN5 Type (651.8) 8.84 (4.7) 9.31 (36.5) 4.8 (616.7) 1.70 (43.) 18 (8) JFDN5 Type (881.4) 10.9 (77.4) 7.0 (18.9) (76.0) 1.88 (47.8) 31 (14) 0.5, 0.50,,.50, 3 SJDN50 Type 3R (95.5) (93.6) 10. (59.6) (908.6) 1.94 (49.3) 40 (18) 0.5, 0.50,,.50, 3 RJDN50 Type (953.3) (93.6) 10. (59.6) (908.6) 1.94 (49.3) 37 (17) JJDN50 Type (985.8) (80.9) (77.9) (863.6).8 (57.9) 53 (4) 0.5, 0.50, 0.75, 1.50,,.50, 3, 3.50 SKDN400 Type 3R (1058.9) (98.5) (357.1) (1013.5) 1.97 (50.0) 60 (7) 0.5, 0.50, 0.75,.50, 3, 3.50 RKDN400 Type (1058.9) (98.5) (357.1) (1013.5) 1.97 (50.0) 53 (4) JKDN400 Type (1165.4) (363.5) 1.38 (314.5) (118.6) 1.91 (48.5) 81 (37) 0.5, 0.50, 0.75, 3, 3.50, 4 SLDN600 Type 3R (17.1) (378.7) (393.7) (118.6) 1.9 (48.8) 84 (38) 0.5, 0.50, 0.75, 3, 3.50, 4 RLDN600 Type (17.1) (378.7) (393.7) (118.6) 1.9 (48.8) 81 (37) JLDN600 Type (1555.0) 1.44 (544.6) (391.4) (1570.7) 1.97 (50.0) 178 (81) SNDN100 Type 3R (1615.).00 (558.8) (447.8) (1570.7) 1.97 (50.0) 175 (79) RNDN100 Type (1615.).00 (558.8) (447.8) (1570.7) 1.97 (50.0) 170 (77) JNDN100 A C A D E B ON OFF C A D E B ON OFF C Volume 4 Circuit Protection CA E February 01 V4-T-379

380 .5 Specialty Breakers Direct Current Circuit Breakers Contents Description Engine Generator Circuit Breakers Direct Current Circuit Breakers Selection Product Selection Accessories Wiring Diagrams Dimensions E Mining Service Circuit Breakers Classic Mining Breakers Add-On Ground Fault Protection Type GFR..... PVGard Solar Circuit Breakers Page V4-T-374 V4-T-38 V4-T-383 V4-T-390 V4-T-391 V4-T-39 V4-T-393 V4-T-416 V4-T-430 V4-T-433 Direct Current Circuit Breakers Product Description DC (direct current) systems and applications are becoming commonplace as alternative energy sources have expanded and the number of DC devices and data centers using DC power has swelled. Eaton offers molded case circuit breakers and switches to meet circuit protection and switching requirements for a host of different DC end use requirements. Applications include UPS battery supply circuits, solar systems and electric vehicle charging, as well as commercial and industrial distribution. Current ratings are available from 15 to 500A, with a full scale of voltage and interrupting ratings to address needs ranging from standard to the highest performance. Optional internal accessories provide remote tripping and indication of breaker status. The DC breaker family is UL 489 listed and exceeds the requirements in UL 489 Supplement SC for UPS applications. Eaton breakers may be applied in both ungrounded and select grounded applications, with poles connected in series to operate at the maximum voltages shown on Page V4-T-381. To use DC circuit breakers on 600V grounded systems, three poles in series must be connected on the ungrounded leg. The HFDDC through HMDLDC DC breakers use the same internal and external accessories as their or Series G AC frame equivalents. NBDC and PBDC use the same internal and external accessories as standard NB and PB breakers. Many of the Eaton AC molded case circuit breakers carry 50 Vdc ratings for ungrounded systems. Refer to Pages V4-T-9 and V4-T-13 for these interrupting tables. V4-T-380 Volume 4 Circuit Protection CA E February 01

381 Specialty Breakers.5 Quick Reference Direct Current Circuit Breakers UL 489 Interrupting Capacity s Interrupting Capacity (ka) Volts DC 1 Circuit Breaker Type IEC Interrupting Capacity s Circuit Breaker Maximum 15 Volts DC Poles in 50 Volts DC Poles in 600 Volts DC Poles in Type Amperes Icu Ics Series Icu Ics Series Icu Ics Series EGEDC EGSDC EGHDC JGEDC 50 1 JGSDC 50 1 JGHDC HJDDC LGEDC LGSDC LGHDC HLDDC HMDLDC Maximum Amperes 15 Poles in Poles in Series 50 Series DC ratings apply to substantially non-inductive circuits. Time constants per UL 489. EGEDC through HMDLDC have been tested up to 300 Vdc to allow for battery charging voltages. 750 Vdc is common in transportation applications. HFDDC, four-pole 750 Vdc is available up to 150A maximum. 300 Vdc and 750 Vdc are not UL 489 listed voltage ratings. 3 Four-pole frame with two-poles connected in parallel. See Page V4-T-391 for series connection diagrams. Use NEC rated cable to connect/short poles in series as shown. Poles in Series 750 EGEDC EGSDC EGHDC HFDDC JGEDC JGSDC JGHDC HJDDC HKDDC LGEDC LGSDC LGHDC HLDDC HLDDC HMDLDC NBDC PBDC Poles in Series Volume 4 Circuit Protection CA E February 01 V4-T-381

382 .5 Specialty Breakers Selection DC Circuit Breaker HFDDC W Frame EGEDC = Series G E (100A max.) EGSDC = Series G E (100A max.) EGHDC = Series G E (100A max.) HFDDC = F (5A max.) JGEDC = Series G J (50A max.) JGSDC = Series G J (50A max.) JGHDC = Series G J (50A max.) HJDDC = J (50A max.) HKDDC = K (400A max.) LGEDC = Series G L (600A max.) LGSDC = Series G L (600A max.) LGHDC = Series G L (600A max.) HLDDC = L (100A max.) HMDLDC = M (800A max.) NBDC = NB (100A max.) PBDC = PB (500A max.) of Poles 1 = Single-pole = Two-pole 3 = Three-pole 4 = Four-pole Trip Unit Ampere 015 =15A 00 =0A 05 =5A 030 =30A 035 =35A 040 =40A 045 =45A 050 =50A 060 =60A 070 =70A 080 =80A 090 =90A 100 =100A 110 =110A 15 =15A 150 =150A 175 =175A 00 =00A 5 =5A 50 =50A 300 =300A 350 =350A 400 =400A 450 =450A 500 =500A 600 =600A 700 =700A 800 =800A 900 =900A 1000 = 1000A 100 = 100A 1600 = 1600A 000 = 000A 500 = 500A Suffix, NB and PB Frames K = Molded case switch L = Line and load terminals, F-Frame MW = 135% magnetic trip unit, without terminals W = Without terminals Series G Frames FFG = Fixed thermal, fixed magnetic trip unit, with terminals FFW = Fixed thermal, fixed magnetic trip unit, without terminals FAG = Fixed thermal, adjustable magnetic trip unit, with terminals FAW = Fixed thermal, adjustable magnetic trip unit, without terminals KSG = Molded case switch, with terminals KSW = Molded case switch, without terminals V4-T-38 Volume 4 Circuit Protection CA E February 01

383 Specialty Breakers.5 Product Selection Type EGEDC DC Circuit Breakers Three-Pole High Interrupting Capacity 35 kaic at 500 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker with Terminals Complete Circuit Breaker without Terminals 5 EGEDC305FFG EGEDC305FFW 30 EGEDC3030FFG EGEDC3030FFW 35 EGEDC3035FFG EGEDC3035FFW 40 EGEDC3040FFG EGEDC3040FFW 45 EGEDC3045FFG EGEDC3045FFW 50 EGEDC3050FFG EGEDC3050FFW 60 EGEDC3060FFG EGEDC3060FFW 70 EGEDC3070FFG EGEDC3070FFW 80 EGEDC3080FFG EGEDC3080FFW 90 EGEDC3090FFG EGEDC3090FFW 100 EGEDC3100FFG EGEDC3100FFW Type EGSDC DC Circuit Breakers Three-Pole High Interrupting Capacity 50 kaic at 500 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker with Terminals Complete Circuit Breaker without Terminals 5 EGSDC305FFG EGSDC305FFW 30 EGSDC3030FFG EGSDC3030FFW 35 EGSDC3035FFG EGSDC3035FFW 40 EGSDC3040FFG EGSDC3040FFW 45 EGSDC3045FFG EGSDC3045FFW 50 EGSDC3050FFG EGSDC3050FFW 60 EGSDC3060FFG EGSDC3060FFW 70 EGSDC3070FFG EGSDC3070FFW 80 EGSDC3080FFG EGSDC3080FFW 90 EGSDC3090FFG EGSDC3090FFW 100 EGSDC3100FFG EGSDC3100FFW Type EGHDC DC Circuit Breakers Three-Pole High Interrupting Capacity 65 kaic at 500 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker with Terminals Complete Circuit Breaker without Terminals 5 EGHDC305FFG EGHDC305FFW 30 EGHDC3030FFG EGHDC3030FFW 35 EGHDC3035FFG EGHDC3035FFW 40 EGHDC3040FFG EGHDC3040FFW 45 EGHDC3045FFG EGHDC3045FFW 50 EGHDC3050FFG EGHDC3050FFW 60 EGHDC3060FFG EGHDC3060FFW 70 EGHDC3070FFG EGHDC3070FFW 80 EGHDC3080FFG EGHDC3080FFW 90 EGHDC3090FFG EGHDC3090FFW 100 EGHDC3100FFG EGHDC3100FFW Volume 4 Circuit Protection CA E February 01 V4-T-383

384 .5 Specialty Breakers HFDDC Type HFDDC DC Circuit Breakers Three-Pole High Interrupting Capacity 4 kaic at 600 Vdc Maximum Continuous Ampere at 40 C Complete Circuit Breaker with Line and Load Terminals 1 Single-Pole Two-Pole Three-Pole Four-Pole Type JGEDC DC Circuit Breakers Three-Pole High Interrupting Capacity 35 kaic at 600 Vdc 1 For breaker without terminals, replace "L" with "W" at end of catalog number. For complete breaker, order individual frame, trip unit and terminals for field installation. 15 HFDDC1015L HFDDC015L HFDDC3015L HFDDC4015L 0 HFDDC100L HFDDC00L HFDDC300L HFDDC400L 5 HFDDC105L HFDDC05L HFDDC305L HFDDC405L 30 HFDDC1030L HFDDC030L HFDDC3030L HFDDC4030L 35 HFDDC1035L HFDDC035L HFDDC3035L HFDDC4035L 40 HFDDC1040L HFDDC040L HFDDC3040L HFDDC4040L 45 HFDDC1045L HFDDC045L HFDDC3045L HFDDC4045L 50 HFDDC1050L HFDDC050L HFDDC3050L HFDDC4050L 60 HFDDC1060L HFDDC060L HFDDC3060L HFDDC4060L 70 HFDDC1070L HFDDC070L HFDDC3070L HFDDC4070L 80 HFDDC1080L HFDDC080L HFDDC3080L HFDDC4080L 90 HFDDC1090L HFDDC090L HFDDC3090L HFDDC4090L 100 HFDDC1100L HFDDC100L HFDDC3100L HFDDC4100L 110 HFDDC1110L HFDDC110L HFDDC3110L HFDDC4110L 15 HFDDC115L HFDDC15L HFDDC315L HFDDC415L 150 HFDDC1150L HFDDC150L HFDDC3150L HFDDC4150L 175 HFDDC175L HFDDC3175L 00 HFDDC00L HFDDC300L 5 HFDDC5L HFDDC35L Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only Thermal-Magnetic Trip Unit Standard Terminals 70 JGEDC3070FAG JGEDC350NN JT3070FA T50FJ 90 JGEDC3090FAG JGEDC350NN JT3090FA T50FJ 100 JGEDC3100FAG JGEDC350NN JT3100FA T50FJ 15 JGEDC315FAG JGEDC350NN JT315FA T50FJ 150 JGEDC3150FAG JGEDC350NN JT3150FA T50FJ 175 JGEDC3175FAG JGEDC350NN JT3175FA T50FJ 00 JGEDC300FAG JGEDC350NN JT300FA T50FJ 5 JGEDC35FAG JGEDC350NN JT35FA T50FJ 50 JGEDC350FAG JGEDC350NN JT350FA T50FJ V4-T-384 Volume 4 Circuit Protection CA E February 01

385 Specialty Breakers.5 JGHDC350NN HJDDC350 Type JGSDC DC Circuit Breakers Three-Pole High Interrupting Capacity 50 kaic at 600 Vdc Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only 1 Type JGHDC DC Circuit Breakers Three-Pole High Interrupting Capacity 65 kaic at 600 Vdc Type HJDDC DC Circuit Breakers Three-Pole High Interrupting Capacity 4 kaic at 600 Vdc Note 1 For complete breaker, order individual frame, trip unit and terminals for field installation. Thermal-Magnetic Trip Unit Standard Terminals 70 JGSDC3070FAG JGSDC350NN JT3070FA T50FJ 90 JGSDC3090FAG JGSDC350NN JT3090FA T50FJ 100 JGSDC3100FAG JGSDC350NN JT3100FA T50FJ 15 JGSDC315FAG JGSDC350NN JT315FA T50FJ 150 JGSDC3150FAG JGSDC350NN JT3150FA T50FJ 175 JGSDC3175FAG JGSDC350NN JT3175FA T50FJ 00 JGSDC300FAG JGSDC350NN JT300FA T50FJ 5 JGSDC35FAG JGSDC350NN JT35FA T50FJ 50 JGSDC350FAG JGSDC350NN JT350FA T50FJ Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Standard Terminals 70 JGHDC3070FAG JGHDC350NN JT3070FA T50FJ 90 JGHDC3090FAG JGHDC350NN JT3090FA T50FJ 100 JGHDC3100FAG JGHDC350NN JT3100FA T50FJ 15 JGHDC315FAG JGHDC350NN JT315FA T50FJ 150 JGHDC3150FAG JGHDC350NN JT3150FA T50FJ 175 JGHDC3175FAG JGHDC350NN JT3175FA T50FJ 00 JGHDC300FAG JGHDC350NN JT300FA T50FJ 5 JGHDC35FAG JGHDC350NN JT35FA T50FJ 50 JGHDC350FAG JGHDC350NN JT350FA T50FJ Maximum Continuous Ampere at 40 C Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Standard Terminals 70 HJDDC350F JT3070T TA50KB 90 HJDDC350F JT3090T TA50KB 100 HJDDC350F JT3100T TA50KB 15 HJDDC350F JT315T TA50KB 150 HJDDC350F JT3150T TA50KB 175 HJDDC350F JT3175T TA50KB 00 HJDDC350F JT300T TA50KB 5 HJDDC350F JT35T TA50KB 50 HJDDC350F JT350T TA50KB Volume 4 Circuit Protection CA E February 01 V4-T-385

386 .5 Specialty Breakers HKDDC3400 LGEDC3630NN Type HKDDC DC Circuit Breakers Three-Pole High Interrupting Capacity 4 kaic at 600 Vdc Maximum Continuous Ampere at 40 C Circuit Breaker Frame Only 1 Type LGEDC DC Circuit Breakers Three-Pole High Interrupting Capacity 35 kaic at 600 Vdc Type LGSDC DC Circuit Breakers Three-Pole High Interrupting Capacity 50 kaic at 600 Vdc 1 For complete breaker, order individual frame, trip unit and terminals for field installation. Three-pole kit. Thermal-Magnetic Trip Unit Standard Terminals 100 HKDDC3400F KT3100T TA300K 15 HKDDC3400F KT315T TA300K 150 HKDDC3400F KT3150T TA300K 175 HKDDC3400F KT3175T TA300K 00 HKDDC3400F KT300T TA300K 5 HKDDC3400F KT35T TA300K 50 HKDDC3400F KT350T TA350K 300 HKDDC3400F KT3300T TA350K 350 HKDDC3400F KT3350T TA350K 400 HKDDC3400F KT3400T 3TA400K Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Standard Terminals 50 LGEDC350FAG LGEDC3630NN LT350FA TA350LK 300 LGEDC3300FAG LGEDC3630NN LT3300FA TA350LK 350 LGEDC3350FAG LGEDC3630NN LT3350FA TA350LK 400 LGEDC3400FAG LGEDC3630NN LT3400FA TA350LK 500 LGEDC3500FAG LGEDC3630NN LT4500FA 3TA63LK 600 LGEDC3600FAG LGEDC3630NN LT3600FA 3TA63LK Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Standard Terminals 50 LGSDC350FAG LGSDC3630NN LT350FA TA350LK 300 LGSDC3300FAG LGSDC3630NN LT3300FA TA350LK 350 LGSDC3350FAG LGSDC3630NN LT3350FA TA350LK 400 LGSDC3400FAG LGSDC3630NN LT3400FA TA350LK 500 LGSDC3500FAG LGSDC3630NN LT4500FA 3TA63LK 600 LGSDC3600FAG LGSDC3630NN LT3600FA 3TA63LK V4-T-386 Volume 4 Circuit Protection CA E February 01

387 Specialty Breakers.5 HLDDC Type LGHDC DC Circuit Breakers Three-Pole High Interrupting Capacity 65 kaic at 600 Vdc Maximum Continuous Ampere at 40 C Complete Breaker Circuit Breaker Frame Only 1 Type HLDDC DC Circuit Breakers Three-Pole High Interrupting Capacity 35 kaic at 600 Vdc Type HLDDC DC Circuit Breakers Two-Pole High Interrupting Capacity 50 kaic at 50 Vdc 34 1 For complete breaker, order individual frame, trip unit and terminals for field installation. Three-pole kit. 3 Includes breaker frame, trip unit and terminals. 4 Four-pole breaker with two poles wired in parellel. Thermal-Magnetic Trip Unit Standard Terminals 50 LGHDC350FAG LGHDC3630NN LT350FA TA350LK 300 LGHDC3300FAG LGHDC3630NN LT3300FA TA350LK 350 LGHDC3350FAG LGHDC3630NN LT3350FA TA350LK 400 LGHDC3400FAG LGHDC3630NN LT3400FA TA350LK 500 LGHDC3500FAG LGHDC3630NN LT4500FA 3TA63LK 600 LGHDC3600FAG LGHDC3630NN LT3600FA 3TA63LK Maximum Continuous Ampere at 40 C Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Standard Terminals 300 HLDDC3600F LT3300T TA60LD 350 HLDDC3600F LT3350T TA60LD 400 HLDDC3600F LT3400T TA60LD 450 HLDDC3600F LT3450T TA60LD 500 HLDDC3600F LT3500T TA60LD 600 HLDDC3600F LT3600T 3TA603LDK Maximum Continuous Ampere at 40 C Complete Breaker 600 HLDDC HLDDC HLDDC HLDDC HLDDC HLDDC100 Volume 4 Circuit Protection CA E February 01 V4-T-387

388 .5 Specialty Breakers HMDLDC3800F Type HMDLDC DC Circuit Breakers Three-Pole High Interrupting Capacity 35 kaic at 600 Vdc Maximum Continuous Ampere at 40 C Circuit Breaker Frame Only 1 Thermal-Magnetic Trip Unit Type NBDC DC Circuit Breakers Three-Pole High Interrupting Capacity 50 kaic at 600 Vdc Type PBDC DC Circuit Breakers Three-Pole High Interrupting Capacity 65 kaic at 600 Vdc 1 Includes frame and trip unit. Order terminals or connectors separately. For complete breaker, order individual frame, trip unit and terminals for field installation. Standard Terminals 300 HMDLDC3800F MT3300T TA700MA1 350 HMDLDC3800F MT3350T TA700MA1 400 HMDLDC3800F MT3400T TA700MA1 450 HMDLDC3800F MT3450T TA700MA1 500 HMDLDC3800F MT3500T TA700MA1 600 HMDLDC3800F MT3600T TA700MA1 700 HMDLDC3800F MT3700T TA700MA1 800 HMDLDC3800F MT3800T TA800MA Maximum Continuous Ampere at 40 C Complete Circuit Breaker Factory Assembled without Terminals Includes Magnetic Trip Unit Calibrated at 135% Standard Terminals 700 NBDC3700MW Included TA1000NB1 800 NBDC3800MW Included TA1000NB1 900 NBDC3900MW Included TA1000NB NBDC31000MW Included TA1000NB1 100 NBDC3100MW Included TA100NB1 Maximum Continuous Ampere at 40 C Complete Circuit Breaker Factory Assembled without Terminals Includes Magnetic Trip Unit Calibrated at 135% Standard Rear Connectors 1600 PBDC31600W Included BA000PB 000 PBDC3000W Included BA000PB 500 PBDC3500W Included BA500PB V4-T-388 Volume 4 Circuit Protection CA E February 01

389 Specialty Breakers.5 DC Breaker Terminal Wire Ranges Breaker Frame Molded Case Switches Eaton s DC molded case switches are used in applications requiring a compact, high-capacity disconnect. They are UL 489 listed and have automatic high instantaneous current protection. These devices do not provide overload protection. Molded Case Switches Maximum Continuous Ampere at 40 C Maximum Breaker Ampacity Note 1 Four-pole frame with two-pole connected in parallel. Terminal Body Material Wire Type AWG Wire Range/ of Conductors Metric Wire Range mm of Terminals Included Standard Terminal EGEDC, EGSDC, EGHDC 100 Aluminum Cu/Al 14 1/ TA15EF HFDDC 0 Steel Cu/Al (1).5 4 (1) 3 3T0FB 100 Steel Cu/Al 14 1/0 (1).5 50 (1) 3 3T100FB 5 Aluminum Cu/Al 4 4/0 (1) 5 95 (1) 3 3TA5FD JGEDC, JGSDC, JGHDC 50 Stainless steel Cu (1) (1) 1 T50FJ HJDDC 50 Aluminum Cu/Al kcmil (1) (1) 1 TA50KB HKDDC 5 Aluminum Cu/Al kcmil (1) (1) 1 TA300K 350 Aluminum Cu/Al kcmil (1) (1) 1 TA350K 400 Aluminum Cu/Al 3/0 50 kcmil () (1) 3 3TA400K LGEDC, LGSDC, LGHDC 400 Aluminum Cu/Al 500 (1) (1) 1 TA350LK 630 Aluminum Cu/Al 500 kcmil () () 1 TA63L 630 Aluminum Cu/Al 500 kcmil () () 3 3TA63LK HLDDC 500 Aluminum Cu/Al 3/0 350 kcmil () () 1 TA60LD 600 Aluminum Cu/Al kcmil () () 3 3TA603LDK HMDLDC 600 Aluminum Cu/Al kcmil () 1 TA700MA1 800 Aluminum Cu/Al 3/0 400 kcmil (3) 1 TA800MA NBDC 700 Aluminum Cu/Al 3/0 400 kcmil (3) (3) 1 TA1000NB1 800 Aluminum Cu/Al 3/0 400 kcmil (3) (3) 1 TA1000NB1 900 Aluminum Cu/Al 3/0 400 kcmil (3) (3) 1 TA1000NB Aluminum Cu/Al 3/0 400 kcmil (3) (3) 1 TA1000NB1 100 Aluminum Cu/Al 4/0 500 kcmil (4) (4) 1 TA100NB1 Interrupting Capacity (Volts DC) Poles in Series With Line and Load Terminals Without Line and Load Terminals 600 Vdc Maximum HFDDC3100KL HFDDC3100KW HFDDC3150KL HFDDC3150KW HFDDC35KL HFDDC35KW JGKDC350KSG JGKDC350KSW HJDDC350K HJDDC350KW HKDDC3400K HKDDC3400KW 65 3 LGKDC3400KSG LGKDC3400KSW LGKDC3630KSG LGKDC3630KSW 35 3 HLDDC3600K HLDDC3600WK HMDLDC3800K HMDLDC3800WK 500 Vdc Maximum EGK3100KSG EGK3100KSW 50 Vdc Maximum HFDDC100KL HFDDC100KW HFDDC150KL HFDDC150KW 5 50 HFDDC5KL HFDDC5KW HLDDC100K 1 HLDDC100WK 1 Volume 4 Circuit Protection CA E February 01 V4-T-389

390 .5 Specialty Breakers Accessories Internal Accessories JGEDC, JGSDC, JGHDC Field Installation Kits Description Factory Installation (HFDDC) HFDDC 1 EGEDC, EGSDC, EGHDC LGEDC, LGSDC, LGHDC HJDDC HKDDC HLDDC HMDLDC NBDC PBDC Right-Pole Mounting Auxiliary switch 1A-1B A06 A1X1PK AUX1A1BPK AUX1A1BPK A1XPK A1X13PK A1X4PK A1X4PK 4980D16G05 60D3G14 A-B A13 AX1RPK AUXABPK AUXABPK AXPK AX3PK AX4PK AX4PK 4980D16G06 60D3G15 Alarm switch 1 make/1 break B06 A1L1RPK ALM1M1BEPK ALM1M1BJPK A1LRPK A1L3RPK A1L4RPK A1L4RPK Auxiliary and alarm combo 1A-1B, 1 make/1 break C05 AAL1RPK AUXALRMEPK AUXALRMJPK AALRPK AAL3RPK AA114RPK AA114RPK Left-Pole Mounting Shunt trip 1 Vdc S0 SNT1LP03K SNT01CPK SNT01CPK SNTP04K SNT3P04K SNT4LP03K SNT4LP03K 606D58G14 606D59G8 4 Vdc S0 SNT1LP03K SNT060CPK SNT060CPK SNTP04K SNT3P04K SNT4LP03K SNT4LP03K 606D58G13 606D59G7 48 Vdc S06 SNT1LP08K SNT060CPK SNT060CPK SNTP06K SNT3P06K SNT4LP3K SNT4LP3K 606D58G1 606D59G6 60 Vdc S06 SNT1LP08K SNT060CPK SNT060CPK SNTP06K SNT3P06K SNT4LP3K SNT4LP3K 606D58G11 606D59G5 15 Vdc S10 SNT1LP1K SNT10CPK SNT10CPK SNTP11K SNT3P11K SNT4LP6K SNT4LP6K 606D58G10 606D59G4 50 Vdc S14 SNT1LP18K SNTP14K SNT3P14K SNT4LP14K SNT4LP14K 606D58G09 606D59G3 10 Vac S06 SNT1LP1K SNT10CPK SNT10CPK SNTP11K SNT3P11K SNT4LP11K SNT4LP11K 060D58G05 060D59G19 Undervoltage release 1 Vdc U30 UVH1LP0K UVR01DPK UVR01DPK UVHLP0K UVH3LP0K UVH4LP0K UVH4LP0K 37D03G D85G11 4 Vdc U34 UVH1LP1K UVR04DPK UVR04DPK UVHLP1K UVH3LP1K UVH4LP1K UVH4LP1K 37D03G D85G1 48 Vdc U38 UVH1LPK UVR048DPK UVR048DPK UVHLPK UVH3LPK UVH4LPK UVH4LPK 37D03G D85G13 15 Vdc U4 UVH1LP6K UVR15DPK UVR15DPK UVHLP6K UVH3LP6K UVH4LP6K UVH4LP6K 37D03G D85G17 50 Vdc U46 UVH1LP8K UVR50DPK UVR50DPK UVHLP8K UVH3LP8K UVH4LP8K UVH4LP8K 37D03G D85G18 10 Vac U14 UVH1LP08K UVR10APK UVR10APK UVHLP08K UVH3LP08K UVH4LP08K UVH4LP08K 373D63G D9G01 Note 1 F-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory. Internal accessories are UL listed for factory installation under E7819. Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected. One accessory can be mounted per pole, per breaker. Factory installation of accessories is available. Contact Eaton for assistance with part number configuration. V4-T-390 Volume 4 Circuit Protection CA E February 01

391 Specialty Breakers.5 Wiring Diagrams onnection Diagrams for DC Application 1 50 Vdc Maximum Two Poles in Series 500 Vdc or 600 Vdc Maximum Three Poles in Series 750 Vdc Maximum Four Poles in Series Load (A) Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. Load (A) Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. 1 Poles in series connection is customer supplied. Use rated cable per NEC. For grounded systems, all poles in series must be connected on non-grounded terminal, with load connected to grounded terminal. Load Suitable for use on ungrounded systems only. Suitable for use on ungrounded systems only. Load (A) Load Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. Load Suitable for use on ungrounded systems only. Volume 4 Circuit Protection CA E February 01 V4-T-391

392 .5 Specialty Breakers Dimensions Approximate Dimensions in Inches (mm) DC Breaker Dimensions Frame of Poles Width Height Depth EGEDC, EGSDC, EGHDC (76.) 5.50 (139.7).99 (75.9) HFDDC (35.1) 6.00 (15.4) 3.38 (86.0).75 (70.0) 6.00 (15.4) 3.38 (86.0) (105.0) 6.00 (15.4) 3.38 (86.0) (139.7) 6.00 (15.4) 3.38 (86.0) JGEDC, JGSDC, JGHDC (104.9) 7.00 (177.8) 3.57 (90.7) HJDDC, (105.0) (54.0) 4.06 (103.1) HKDDC, (139.7) (57.3) 4.10 (104.1) LGEDC, LGSDC, LGHDC (139.) (57.3) 4.09 (103.9) 600A Max. HLDDC, (09.6) (73.1) 4.06 (103.1) 100A Max. HLDDC (79.4) (73.1) 4.06 (103.1) HMDLDC, (09.6) (406.4) 4.06 (103.1) NBDC (09.6) (406.4) 5.50 (139.7) PBDC (306.3).06 (560.3) 9.06 (30.1) V4-T-39 Volume 4 Circuit Protection CA E February 01

393 Specialty Breakers.5 E Mining Service Breakers Contents Description Engine Generator Circuit Breakers Direct Current Circuit Breakers E Mining Service Breakers Product Selection Accessories Classic Mining Breakers Add-On Ground Fault Protection Type GFR..... PVGard Solar Circuit Breakers Page V4-T-374 V4-T-380 V4-T-397 V4-T-413 V4-T-416 V4-T-430 V4-T-433 E Mining Service Breakers Product Overview State-of-the-art E mining service breakers incorporate the rigid specifications and testing procedures developed by a focus group led by engineers from several large coal companies and Eaton design engineers. Additionally, the performance of these breakers was proven and verified during hundreds of hours of field testing in harsh mine environments. E mining breakers are available in 600 Vac and l000y/ 577 Vac. Interchangeable trip units can be used on either 600 or 1000 Vac frames. The E mining breaker family is designed especially for trailing cable application per MSHA 30 CFR 75. Field interchangeable electronic rms sensing trip units are available from 150 to 000 amperes with instantaneous pickup settings conforming to the code of Federal Regulations 30 CFR Electromechanical trip units are also available with a wide range of magnetic pickup ranges. E electronic trip units are the first to provide the mining industry with true rms sensing, made possible by the custom ASIC microprocessor in each electronic trip unit. E breakers are designed to be physically and electrically interchangeable with Classic Mining Service Breakers and supersede Mining Service Breakers. The table to the right outlines direct replacements. 600 Vac Mining Breaker Replacement Chart Classic E FBM FDBM E F HFBM FDM E F HFDM (mag. only) Additional Information on Mining Breakers Source Description E F JDM E J KAM KDM E K KAMH KDM E K LAM LDM E L LAMH LDM E L LCM LDM E L LCMH LDM E L MAM E M MAMH E M MCM E M MCMH E M NBM E N NBMH E N NCM E N NCMH E N TD E BR E TC E Vac Mining Breaker Replacement Chart Classic E M HFM E FM JDCM E JM HKAM KDCM E KM HLAM LDCM E LM HLCM LDCM E LM HMAM E MM HMCM E MM HNBM E NM HNBMH E NM HNCM E NM HLCLM E NM HPBM E RM 1 E Mining Circuit Breaker Dimensional Data E Mining Circuit Breaker Brochure E Mining Circuit Breaker Time Current Curves Mining and Metals Note 1 E R/E RM is a new frame physically different than the HPBM. See DS9-170MS. Volume 4 Circuit Protection CA E February 01 V4-T-393

394 .5 Specialty Breakers Eaton s mining service circuit breakers provide short circuit protection as specified in the code of Federal Regulations 30 CFR E 5/400 ampere K frame and 400/600 ampere L frame electronic trip units feature specifically designed instantaneous pickup settings to conform exactly with the code of Federal Regulations 30 CFR Electromechanical trip units are also available with a wide range of magnetic pickup ranges. The tables below list the conductor size maximum allowable circuit breaker instantaneous setting and the E breaker that meets that setting. Interrupting Capacity Interrupting Capacity (Symmetrical ka) Circuit Vac (50/60 Hz) Vdc 1 Breaker Type Y/ E F E J E K E LME E L E M E N E R E FM E JM E KM E LMZ E LM E MM E NM E RM Trailing Cable Setting Per 30 CFR 75 Conductor Size Maximum Breaker Instantaneous Setting Maximum Ampere 75 C Insulated Conductor E /E M Instantaneous Only Setting E K 150A A E K 150A B E K 150A C E K 5A A E K 5A B E K 5A/EL 400A C/A E K 5A/EL 400A D/B E K 5A/EL 400A E/C E K 5A/EL 400A F/D 1/ E K 5A/EL 400A G/E / E K 5A/EL 400A H/F 3/ E L 400A G 4/ E L 400A H E L 400A H E L 400A H E L 400A H E L 400A H E L 400A H Auxiliary Switch Electrical Data Maximum Voltage Alarm (Signal/Lockout Switch) Electrical Data Frequency Maximum Current Amperes /60 Hz DC 0.5 (non-inductive load) 50 DC 0.5 (non-inductive load) Maximum Voltage Frequency Maximum Current Amperes /60 Hz DC 0.5 (non-inductive load) 50 DC 0.5 (non-inductive load) 1 Two poles in series. DC rating applies to breakers with thermal-magnetic trip unit. Breakers with electronic trip units are not DC rated. Series rated for application with Eaton s E KM and E LM breakers. V4-T-394 Volume 4 Circuit Protection CA E February 01

395 Specialty Breakers.5 Undervoltage Release Mechanism Electrical Data Breaker Type Supply Voltage Dropout Voltage Pickup Voltage Minimum Maximum Maximum EF/EFM 110 Vac Vac Vac Vdc Vdc Vdc 1.9 EJ/EJM 110 Vac Vac.1 17 Vac Vdc Vdc Vdc. EK/EKM 110 Vac Vac.1 17 Vac Vdc Vdc Vdc. ELME/ELMZ 110 Vac Vac Vac Vdc Vdc Vdc 1.1 EL/ELM/EM/ 110 Vac EMM 10 Vac.1 17 Vac Vdc Vdc Vdc. EN/ENM 110 Vac Vac.1 17 Vac Vdc Vdc Vdc. ER/ERM 110 Vac Vac Vac Vdc Vdc Vdc 3.8 VA Volume 4 Circuit Protection CA E February 01 V4-T-395

396 .5 Specialty Breakers Shunt Trip Electrical Data Operating Voltage Breaker Type Supply Voltage Minimum VA EF/EFM 48 Vac Vac Vac Vac Vac Vac Vac Vac Vdc Vdc Vdc Vdc Vdc 71 EJ/EJM 110 Vac Vac Vac Vdc Vdc Vdc 150 EK/EKM 110 Vac Vac Vac Vdc Vdc Vdc Vac Vac Vac 10 ELME/ELMZ 110 Vac Vac 9 17 Vac Vdc Vdc Vdc Vdc Vdc Vdc 11 Operating Voltage Breaker Type Supply Voltage Minimum VA EL/ELM/EM/ 48 Vac EMM 60 Vac Vac Vac Vac Vdc Vdc Vdc Vdc Vdc 140 EN/ENM 110 Vac Vac Vac Vdc Vdc Vdc 140 ER/ERM 110 Vac Vac Vac Vdc Vdc Vdc 480 V4-T-396 Volume 4 Circuit Protection CA E February 01

397 Specialty Breakers.5 Product Selection E F/E FM Thermal-Magnetic Circuit Breakers Sealed Breakers with Non-Interchangeable Trip Unit Include Line/Load Terminals E F/E FM 600 Vac Maximum, 50 Vdc, 5 ka at 480 Vac, Three-Pole 1 Maximum Continuous Ampere at 40 C 15 EF EF300 5 EF EF EF EF EF EF EF EF EF EF EF EF EF Y/577 Vac Maximum, 50 Vdc, 10 ka at 1000 Vac, Three-Pole Maximum Continuous Ampere at 40 C Note 1 For two-pole application, use outer poles EFM300 5 EFM EFM EFM EFM EFM EFM EFM EFM EFM EFM3150 Volume 4 Circuit Protection CA E February 01 V4-T-397

398 .5 Specialty Breakers E F/E FM Magnetic Only Circuit Breakers Sealed Breakers with Non-Interchangeable Trip Unit Include Line/Load Terminals 600 Vac Maximum, 50 Vdc, 5 ka at 480 Vac, Three-Pole Maximum Continuous Ampere at 40 C Magnetic Trip Range EF003AM EF007CM EF015EM EF030HM EF030EM EF050KM EF050YM EF070MM EF100KM EF100RM EF150TM EF150UM 1000Y/577 Vac Maximum, 50 Vdc, 10 ka at 1000 Vac, Three-Pole Maximum Continuous Ampere at 40 C Magnetic Trip Range EFM050KM EFM050YM EFM070MM EFM100KM EFM100RM EFM150TM EFM150UM V4-T-398 Volume 4 Circuit Protection CA E February 01

399 Specialty Breakers.5 E J/E JM Circuit Breakers with Interchangeable Thermal-Magnetic Trip Unit E J/E JM 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EJ3070W EJ350F EJ3070T EJ3090W EJ350F EJ3090T EJ3100W EJ350F EJ3100T EJ315W EJ350F EJ315T EJ3150W EJ350F EJ3150T EJ3175W EJ350F EJ3175T EJ300W EJ350F EJ300T EJ35AW EJ350F EJ35TA EJ35DW EJ350F EJ35TD EJ35W EJ350F EJ35T EJ350W EJ350F EJ350T 1000Y/577 Vac Maximum, 50 Vdc, 10 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EJM3070W EJM350F EJ3070T EJM3090W EJM350F EJ3090T EJM3100W EJM350F EJ3100T EJM315W EJM350F EJ315T EJM3150W EJM350F EJ3150T EJM3175W EJM350F EJ3175T EJM300W EJM350F EJ300T EJM35AW EJM350F EJ35TA EJM35DW EJM350F EJ35TD EJM35W EJM350F EJ35T EJM350W EJM350F EJ350T Volume 4 Circuit Protection CA E February 01 V4-T-399

400 .5 Specialty Breakers E J/E JM Circuit Breakers with Interchangeable Magnetic Only Trip Unit 600 Vac Maximum, 50 Vdc, 5 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EJ350MAW EJ350F EJ350TMA EJ350MCW EJ350F EJ350TMC EJ350MDW EJ350F EJ350TMD EJ350MFW EJ350F EJ350TMF EJ350MGW EJ350F EJ350TMG EJ350MJW EJ350F EJ350TMJ EJ350MKW EJ350F EJ350TMK EJ350MLW EJ350F EJ350TML EJ350MW EJ350F EJ350TM 1000Y/577 Vac Maximum, 50 Vdc, 10 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EJM350MAW EJM350F EJ350TMA EJM50MCW EJM350F EJ350TMC EJM350MDW EJM350F EJ350TMD EJM350MFW EJM350F EJ350TMF EJM350MGW EJM350F EJ350TMG EJM350MJW EJM350F EJ350TMJ EJM350MKW EJM350F EJ350TMK EJM350MLW EJM350F EJ350TML EJM350MW EJM350F EJ350TM V4-T-400 Volume 4 Circuit Protection CA E February 01

401 Specialty Breakers.5 E K/E KM Circuit Breakers with Interchangeable Thermal-Magnetic Trip Unit E K/E KM 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EK3100W EK3400F EK3100T EK315W EK3400F EK315T EK3150W EK3400F EK3150T EK3175W EK3400F EK3175T EK300W EK3400F EK300T EK35AW EK3400F EK35TA EK35DW EK3400F EK35TD EK35W EK3400F EK35T EK350W EK3400F EK350T EK3300W EK3400F EK3300T EK3350W EK3400F EK3350T EK3400W EK3400F EK3400T 1000Y/577 Vac Maximum, 50 Vdc, 14 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKM3100W EKM3400F EK3100T EKM315W EKM3400F EK315T EKM3150W EKM3400F EK3150T EKM3175W EKM3400F EK3175T EKM300W EKM3400F EK300T EKM35AW EKM3400F EK35TA EKM35DW EKM3400F EK35TD EKM35W EKM3400F EK35T EKM350W EKM3400F EK350T EKM3300W EKM3400F EK3300T EKM3350W EKM3400F EK3350T EKM3400W EKM3400F EK3400T Volume 4 Circuit Protection CA E February 01 V4-T-401

402 .5 Specialty Breakers E K/E KM Circuit Breakers with Interchangeable Magnetic Only Trip Unit 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EK3400MAW EK3400F EK3400TMA EK3400MDW EK3400F EK3400TMD EK3400MFW EK3400F EK3400TMF EK3400MGW EK3400F EK3400TMG EK3400MJW EK3400F EK3400TMJ EK3400MKW EK3400F EK3400TMK EK3400MLW EK3400F EK3400TML EK3400MWW EK3400F EK3400TMW EK3400MNW EK3400F EK3400TMN EK3400MRW EK3400F EK3400TMR EK3400MW EK3400F EK3400TM 1000Y/577 Vac Maximum, 50 Vdc, 14 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKM350MAW EKM3400F EK3400TMA EKM3400MDW EKM3400F EK3400TMD EKM3400MFW EKM3400F EK3400TMF EKM3400MGW EKM3400F EK3400TMG EKM3400MJW EKM3400F EK3400TMJ EKM3400MKW EKM3400F EK3400TMK EKM3400MLW EKM3400F EK3400TML EKM3400MWW EKM3400F EK3400TMW EKM3400MNW EKM3400F EK3400TMN EKM3400MRW EKM3400F EK3400TMR EKM3400MW EKM3400F EK3400TM V4-T-40 Volume 4 Circuit Protection CA E February 01

403 Specialty Breakers.5 E K/E KM Circuit Breakers with Interchangeable Electronic Trip Unit, Long/Instantaneous 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKE3100W EK3400F KEM3100T EKE315W EK3400F KEM315T EKE3150W EK3400F KEM3150T EKE300W EK3400F KEM300T EKE35W EK3400F KEM35T EKE35W EK3400F KEM35T EKE3400W EK3400F KEM3400T EKE3400W EK3400F KEM3400T 1000Y/577 Vac Maximum, 14 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKEM3100W EKM3400F KEM3100T EKEM315W EKM3400F KEM315T EKEM3150W EKM3400F KEM3150T EKEM300W EKM3400F KEM300T EKEM35 EKM3400F KEM35T EKEM35W EKM3400F KEM35T EKEM3400W EKM3400F KEM3400T EKEM3400W EKM3400F KEM3400T Volume 4 Circuit Protection CA E February 01 V4-T-403

404 .5 Specialty Breakers E K/E KM Circuit Breakers with Interchangeable Electronic Trip Unit, Instantaneous Only 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKE3150MW EK3400F KEM3150TM EKE35MW EK3400F KEM35TM EKE35MW EK3400F KEM35TM EKE3400MW EK3400F KEM3400TM EKE3400MW EK3400F KEM3400TM 1000Y/577 Vac Maximum, 14 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EKEM3150MW EKM3400F KEM3150TM EKEM35MW EKM3400F KEM35TM EKEM35MW EKM3400F KEM35TM EKEM3400MW EKM3400F KEM3400TM EKEM3400MW EKM3400F KEM3400TM V4-T-404 Volume 4 Circuit Protection CA E February 01

405 Specialty Breakers.5 E LME/E LMZ (Series G) Circuit Breakers with Magnetic Only Trip Unit 600 Vac Maximum, 50 Vdc, 65 ka at 480 Vac, Three-Pole Maximum Continuous Complete Breaker Frame Only Trip Unit Only Ampere Magnetic at 40 C Trip Range ELME3400KMW ELME3400NN LT3400KM 1000Y/577 Vac Maximum, 50 Vdc, 10 ka at 1000 Vac, Three-Pole Maximum Continuous Complete Breaker Frame Only Trip Unit Only Ampere Magnetic at 40 C Trip Range ELMZ3400KMW ELMZ3400NN LT3400KM Circuit Breakers with Interchangeable Electronic Trip Unit 600 Vac Maximum, 65 ka at 480 Vac, Three-Pole Maximum Continuous Complete Breaker Frame Only Trip Unit Only Ampere Magnetic at 40 C Trip Range ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M ELME340031W ELME3400NN LT340031M 1000Y/577 Vac Maximum, 10 ka at 1000 Vac, Three-Pole Maximum Continuous Complete Breaker Frame Only Trip Unit Only Ampere Magnetic at 40 C Trip Range ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M ELMZ340031W ELMZ3400NN LT340031M Volume 4 Circuit Protection CA E February 01 V4-T-405

406 .5 Specialty Breakers E L/E LM Circuit Breakers with Interchangeable Thermal-Magnetic Trip Unit 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EL3300W EL3600F EL3300T EL3350W EL3600F EL3350T EL3400W EL3600F EL3400T EL3450W EL3600F EL3450T EL3500W EL3600F EL3500T EL3600W EL3600F EL3600T 1000Y/577 Vac Maximum, 50 Vdc, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELM3300W ELM3600F EL3300T ELM3350W ELM3600F EL3350T ELM3400W ELM3600F EL3400T ELM3450W ELM3600F EL3450T ELM3500W ELM3600F EL3500T ELM3600W ELM3600F EL3600T ELM3600F EL3600TL 1 Note ampere thermal T.A. V4-T-406 Volume 4 Circuit Protection CA E February 01

407 Specialty Breakers.5 E L/E LM Circuit Breakers with Interchangeable Magnetic Only Trip Unit 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EL3600MLW EL3600F EL3600TML EL3600MNW EL3600F EL3600TMN EL3600MRW EL3600F EL3600TMR EL3600MXW EL3600F EL3600TMX EL3600MYW EL3600F EL3600TMY EL3600MPW EL3600F EL3600TMP EL3600MW EL3600F EL3600TM 1000Y/577 Vac Maximum, 50 Vdc, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELM3600MLW ELM3600F EL3600TML ELM3600MNW ELM3600F EL3600TMN ELM3600MRW ELM3600F EL3600TMR ELM3600MXW ELM3600F EL3600TMX ELM3600MYW ELM3600F EL3600TMY ELM3600MPW ELM3600F EL3600TMP ELM3600MW ELM3600F EL3600TM Volume 4 Circuit Protection CA E February 01 V4-T-407

408 .5 Specialty Breakers E L/E LM Circuit Breakers with Interchangeable Electronic Trip Unit, Long/Instantaneous 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELE3300W EL3600F LEM3300T ELE3350W EL3600F LEM3350T ELE3400W EL3600F LEM3400T ELE3400W EL3600F LEM3400T ELE3600W EL3600F LEM3600T ELE3600W EL3600F LEM3600T 1000Y/577 Vac Maximum, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELEM3300W ELM3600F LEM3300T ELEM3350W ELM3600F LEM3350T ELEM3400W ELM3600F LEM3400T ELEM3400W ELM3600F LEM3400T ELEM3600W ELM3600F LEM3600T ELEM3600W ELM3600F LEM3600T Circuit Breakers with Interchangeable Electronic Trip Unit, Instantaneous Only 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELE3400MW EL3600F LEM3400TM ELE3400MW EL3600F LEM3400TM ELE3600MW EL3600F LEM3600TM ELE3600MW EL3600F 1483D53G Y/577 Vac Maximum, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range ELEM3400MW ELM3600F LEM3400TM ELEM3400MW ELM3600F LEM3400TM ELEM3600MW ELM3600F LEM3600TM ELEM3600MW ELM3600F 1483D53G50 V4-T-408 Volume 4 Circuit Protection CA E February 01

409 Specialty Breakers.5 E M/E MM Circuit Breaker with Interchangeable Thermal-Magnetic Trip Unit E M/E MM 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EM3600W EM3800F EM3600TN EM3800W EM3800F EM3800TX 1000Y/577 Vac Maximum, 50 Vdc, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EMM3600W EMM3800F EM3600TN EMM3800W EMM3800F EM3800TX Circuit Breaker with Interchangeable Magnetic Only Trip Unit 600 Vac Maximum, 50 Vdc, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EM3800MNW EM3800F EM3800TMN EM3800MXW EM3800F EM3800TMX EM3800MPW EM3800F EM3800TMP EM3800MWW EM3800F EM3800TMW 1000Y/577 Vac Maximum, 50 Vdc, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EMM3800MNW EMM3800F EM3800TMN EMM3800MXW EMM3800F EM3800TMX EMM3800MPW EMM3800F EM3800TMP EMM3800MWW EMM3800F EM3800TMW Volume 4 Circuit Protection CA E February 01 V4-T-409

410 .5 Specialty Breakers E M/E MM Circuit Breaker with Interchangeable Electronic Trip Unit, Long/Instantaneous 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EME3800W EM3800F MEM3800T EME3800W EM3800F MEM3800T 1000Y/577 Vac Maximum, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EMEM3800W EMM3800F MEM3800T EMEM3800W EMM3800F MEM3800T Circuit Breaker with Interchangeable Electronic Trip Unit, Instantaneous Only 600 Vac Maximum, 35 ka at 480 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EME3800MW EM3800F MEM3800TM EME3800MW EM3800F MEM3800TM 1000Y/577 Vac Maximum, 18 ka at 1000 Vac, Three-Pole Maximum Complete Breaker Frame Only Trip Unit Only Continuous Ampere Magnetic at 40 C Trip Range EMEM3800MW EMM3800F MEM3800TM EMEM3800MW EMM3800F MEM3800TM V4-T-410 Volume 4 Circuit Protection CA E February 01

411 Specialty Breakers.5 E N/E NM Circuit Breakers with Electronic Trip Unit, Long/Instantaneous 600 Vac Maximum, 50 ka at 480 Vac, Three-Pole Frame Maximum Continuous Ampere at 40 C Magnetic Trip Range 1000Y/577 Vac Maximum, 5 ka at 1000 Vac, Three-Pole Frame Circuit Breakers with Electronic Trip Unit, Instantaneous Only 600 Vac Maximum, 50 ka at 480 Vac, Three-Pole Frame 1000Y/577 Vac Maximum, 5 ka at 1000 Vac, Three-Pole Frame EN3400W EN3500W EN3600W EN3700W EN3800W EN3900W EN310W EN31W Maximum Continuous Ampere at 40 C Magnetic Trip Range ENM3400W ENM3500W ENM3600W ENM3700W ENM3800W ENM3900W ENM310W ENM31W Maximum Continuous Ampere at 40 C Magnetic Trip Range EN3800MW EN31MW Maximum Continuous Ampere at 40 C Magnetic Trip Range ENM3800MW ENM31MW Volume 4 Circuit Protection CA E February 01 V4-T-411

412 .5 Specialty Breakers E R/E RM Circuit Breakers with Electronic Trip Unit, Long/Instantaneous (Does Not Include Plugs) Vac Maximum, 50 ka at 480 Vac, Three-Pole Frame Maximum Continuous Ampere at 40 C 1000Y/577 Vac Maximum, 5 ka at 1000 Vac, Three-Pole Frame Note Magnetic Trip Range 1 plugs: 1600 amperes 16RES16T; 000 amperes 0RES0T. LS x I n ER316T33W x I n ER30T33W LSI x I n ER316T3W x I n ER30T3W Maximum Continuous Ampere at 40 C Magnetic Trip Range LS x I n ERM316T33W x I n ERM30T33W LSI x I n ERM316T3W x I n ERM30T3W V4-T-41 Volume 4 Circuit Protection CA E February 01

413 Specialty Breakers.5 Accessories Line and Load Terminals Breaker Type Maximum Breaker Amperes End Cap Terminals For Use with Ring Type Terminals External Accessories Padlockable Handle Lock Hasp Breaker Type Wire Type AWG Wire Range (No. Conductors) E F/E FM 100 Cu/AI #14 1/0 (1) 3T100FB (package of three) 150 Cu #4 4/0 (1) 3T150FB (package of three) E J/E JM 50 Cu #4 350 (1) T50KB E K/E KM 5 Cu #3 350 (1) T300K 350 Cu (1) T350K 400 Cu /0 50 () 3T400K (three-pole kit) E LME/E LMZ 400 Cu/AI (1) 3TA631LK E L/E LM 400 Cu/AI 4/0 600 (1) 3TA401LDK (three-pole kit) 600 Cu () T60LD E M/E MM 600 Cu () /0 500 kcmil T600MA1 600 Cu/AI () kcmil TA700MA1 800 std. Cu/AI (3) 3/0 400 kcmil TA800MA 800 Cu/AI () kcmil TA801MA 800 Cu (3) 3/0 300 kcmil T800MA1 E N/E NM 700 Cu /0 500 () T700NB Cu 3/0 500 (3) T1000NB1 100 Cu 3/0 400 (4) T100NB3 Breaker Type 1600 Cu/AI (4) TA1600RD 000 Cu/AI 600 (6) TA000RD Maximum Breaker Amperes Metric E F/E FM 150 KPEK1 KPEMK1 E J/E JM 50 KPEK KPEMK E K/E KM 400 KPEK3 KPEMK3 E LME/E LMZ 400 L3RTWK E L/E LM 600 KPEK4 KPEMK4 E F/E FM E J/E JM E K/E KM E LME/E LMZ E L/E LM E M/E MM E N/E NM E R/E RM PLK1 PLK3 PLK3 LPHL HLK4 HLK4 PLK5 HLK6 Imperial Volume 4 Circuit Protection CA E February 01 V4-T-413

414 .5 Specialty Breakers Internal Accessories Undervoltage Release 1 Breaker Type UVR Type Voltage Mounting Location E F/E FM Handle reset Vac Left pole UVH1LP11K (thermal/magnetic only) U18 Handle reset Vdc Left pole UVH1LP6K (thermal/magnetic only) U4 E J/E JM Handle reset Vac Left pole UVHLP08K U18 Handle reset Vac Left pole UVHLP11K U Handle reset Vdc Left pole UVHLP6K T14 E K/E KM 10 volt handle reset with LED 10 Vac Left pole UVM3LP08K 3 U66 10 volt handle reset with LED 10 Vac Left pole UVM3LP08KT 4 U68 Handle reset Vac Left pole UVH3LP08K U18 Handle reset Vac Left pole UVH3LP11K U Handle reset Vdc Left pole UVH3LP6K T14 E LME/E LMZ Handle reset Vac Left pole UVR10APK U5 Handle reset Vdc Left pole UVR15DPK U6 E L/E LM/E M/E MM 10 volt handle reset with LED 10 Vac Left pole UVM4LP08K 3 U66 10 volt handle reset with LED 10 Vac Left pole UVM4LP08KT 4 U68 Handle reset Vac Left pole UVH4LP08K U18 Handle reset Vac Left pole UVH4LP11K U Handle reset Vdc Left pole UVH4LP6K T14 E N/E NM 10 volt handle reset with LED 10 Vac Left pole UVM5LP08K 3 U66 10 volt handle reset with LED 10 Vac Left pole UVM5LT08K 4 U68 Handle reset Vac Left pole UVH5LP08K U18 Handle reset Vac Left pole UVH5LP11K U Handle reset Vdc Left pole UVH5LP6K T14 E R/E RM 10 volt handle reset with LED 10 Vac Right pole UVM6RP08K 35 U58 Handle reset Vac Right pole UVH6RP08K 5 U49 Handle reset Vac Right pole UVH6RP11K 5 U53 Handle reset Vdc Right pole UVH6RP6K 5 T33 1 Contact Eaton for internal accessory voltage ratings not listed. LH (RH also available). 3 Pigtail leads. 4 Terminal blocks. 5 RH only. Factory Modification Code V4-T-414 Volume 4 Circuit Protection CA E February 01

415 Specialty Breakers.5 Shunt Trip 1 Breaker Type Auxiliary Switch Voltage Mounting Location E F/E FM Vac or Left pole SNT1LP08K S Vdc Vac or Left pole SNT1LP1K S Vdc E J/E JM Vac or Left pole SNTP11K 3 S Vdc E K/E KM Vac or Left pole SNT3P11K 3 S Vdc E LME/E LMZ 4 60 Vac/Vdc Left pole SNT060CPK S Vac/Vdc Left pole SNT10CPK S E L/E LM/E M/E MM Vac Left pole SNT4LP05K S Vdc Left pole SNT4LP3K S Vac Left pole SNT4LP11K S Vdc Left pole SNT4LP6K S4 E N/E NM Vac Left pole SNT5LP11K S Vdc Left pole SNT5LP6K S4 E R/E RM Vac Right pole SNT6P11K 4 S Vdc Right pole SNT6P6K 4 S45 Breaker Type of Sets of Contacts (1A and 1B) Mounting Location E F/E FM 1 Right A1X1PK A06 Right AX1RPK A13 E J/E JM 1 Right A1XPK A06 Right AXPK A13 E K/E KM 1 Right A1X3PK A06 Right AX3PK A13 E LME/E LMZ 1 Right AUX1A1BPK A1 Right AUXABPK A E L/E LM/E M/E MM 1 Right A1X4PK A06 Right AX4PK A13 E N/E NM 1 Right A1X5PK A06 Right AX5PK A13 E R/E RM Right AX6RPK A1 4 Right A4X6RPK A19 Factory Modification Code Factory Modification Code Alarm (Signal/Lockout Switch) Breaker Type of Sets of Contacts (Make and Break) Mounting Location E F/E FM 1 Right A1L1LPK/A1L1RPK B06 Right AL1LPK/AL1RPK B13 E J/E JM 1 Right A1LLPK/A1LRPK B06 E K/E KM 1 Right A1L3LPK/A1L3RPK B06 Right AL3LPK/AL3RPK B13 E LME/E LMZ 1 Right ALM1M1BJPK B1 Right ALMMBJPK B3 E L/E LM/E M/E MM 1 Right A1L4LPK/A1L4RPK B06 Right AL4LPK/AL4RPK B13 E N/E NM 1 Right A1L5LPK/A1L5RPK B06 Right AL5LPK/AL5RPK B13 E R/E RM 1 Right A1L6RPK B05 Right AL6RPK B1 1 Contact Eaton for internal accessory voltage ratings not listed. LH (RH also available). 3 LH or RH. 4 RH only. Factory Modification Code Volume 4 Circuit Protection CA E February 01 V4-T-415

416 .5 Specialty Breakers Classic Mining Breakers Product Overview Classic mining service circuit breakers continue to be manufactured and are primarily applied to achieve an exact physical and electronic replacement of previously Cutler-Hammer installed Westinghouse equipment. To upgrade to the current offering of E mining circuit breakers, consult the cross reference information on Page V4-T-45. AC Interrupting Capacity, Symmetrical Amperes Special DC Interrupting Capacity Breaker Type 1 Based on circuit power factor of 50% or greater. HLAM must be rear stud connected. If front connected, interrupting capacity rating is 10,000 amperes. 3 Resistive circuit. 4 Two poles in electrical series in ungrounded leg of circuit. Contents 60 Hz All Other 1000 Volt AC Volts KAM LAM, MAM, NBM HKAM HLAM Breakers 40 5,000 4, ,000 30, ,000, ,000 1,000 14,000 Breaker Type Description E Mining Service Breakers Product Overview Product Selection Accessories Classic Mining Breakers Product Selection Accessories Reference Information PVGard Solar Circuit Breakers Interrupting Capacity (Amperes) at Vdc Single-Pole Two Poles in Series 4 Maximum Ampere mh Inductance mh Inductance mh Inductance.4 mh Inductance KAM 5 15,000 10,000 15, LAM 400/600 15,000 10,000 15, MAM ,000 10,000 15, NBM ,000 10,000 15, Page V4-T-393 V4-T-393 V4-T-397 V4-T-413 V4-T-416 V4-T-418 V4-T-43 V4-T-45 V4-T-433 V4-T-416 Volume 4 Circuit Protection CA E February 01

417 Specialty Breakers.5 Classic Circuit Breakers For Mining Service Undervoltage Release Data Undervoltage releases are calibrated to pick up at 7 to 85% of rated voltage dropout between 35 to 70% of rated voltage. Breaker Type Shunt Trip Coil Data Breaker Type Volts Amperes VA 1 Supplied for external customer mounting. New design electrical reset UVR. 3 16,000 for Type MAM and HMAM. Volts Line Amperes Series Resistors 1 KAM, HKAM 1 480/ , / / / LAM, HLAM, MAM, 480/ , HMAM, NBM, HNBM 1 40/ , / / KAM, HKAM, LAM, HLAM, MAM, HMAM, NBM, HNBM 480/ / / DC Total VA Volume 4 Circuit Protection CA E February 01 V4-T-417

418 .5 Specialty Breakers Product Selection For reference only. Replace these frames with E Series. See Cross-Reference information beginning on Page V4-T-45. Classic Mining Service Circuit Breakers Breaker Type Frame Style s 1 Poles Amperes 1 Terminals not included in style number. All breakers listed are complete with accessories indicated. 3 Rated 10 volts/60 Hz: undervoltage release is handle reset type. 4 UVR is auto-reset type, 10 Vac. M = magnetic only; TM = thermal-magnetic. Trip Type Accessories (Included in Frame) KAM 609D60G M None C6G M UVR D60G M Standard shunt trip C6G01 5 TM UVR C6G0 5 TM UVR D60G M None C6G M UVR D60G M Standard shunt trip D48G TM None D48G TM None C6G TM UVR C6G TM UVR D60G TM Standard shunt trip D60G0 3 5 TM Standard shunt trip D60G M None D60G M None C6G M UVR C6G M UVR LAM 191C3G TM UVR D60G M Shunt trip (48 Vdc) C3G TM UVR D48G TM None C3G TM UVR Magnetic Trip Range, Amperes 3 609D60G TM Standard shunt trip D60G M None C3G M UVR V4-T-418 Volume 4 Circuit Protection CA E February 01

419 Specialty Breakers.5 For reference only. Replace these frames with E Series. See Cross-Reference information beginning on Page V4-T-45. Classic Mining Service Circuit Breakers, continued Breaker Type Frame Style s 1 Poles Amperes 1 Terminals not included in style number. All breakers listed are complete with accessories indicated. 3 Rated 10 volts/60 Hz: undervoltage release is handle reset type. 4 UVR is auto-reset type, 10 Vac. M = magnetic only; TM = thermal-magnetic. Trip Type Accessories (Included in Frame) MAM 609D60G TM UVR Magnetic Trip Range, Amperes 3 609D60G TM UVR D60G TM UVR D48G TM None D60G TM UVR D60G TM Standard shunt trip D60G TM Standard shunt trip D48G TM None D60G TM UVR D60G M None D60G M UVR D60G M None D60G M UVR NBM 19C37G TM UVR C37G TM UVR C36G TM None C37G TM UVR C36G TM Standard shunt trip C36G TM Standard shunt trip C36G TM None C37G TM UVR C36G M None C37G M UVR Volume 4 Circuit Protection CA E February 01 V4-T-419

420 .5 Specialty Breakers HKAM HLAM HMAM HNAM 1000 Volt Classic Mining Service Circuit Breakers Breaker Type Frame Style s Poles Amperes 1 The magnetic trip range does not change when rating plug is changed. 10 volt, 60 Hz electrical reset type. 3 Rated 10 volts, 60 Hz; undervoltage release is handle reset type. M = magnetic only; TM = thermal-magnetic. Trip Type Accessories (Included in Frame) HKAM 609D60G M None C6G M UVR D48G TM None C6G1 3 5 TM UVR D48G TM None C6G TM UVR C6G M UVR C6G M UVR HLAM 5685D48G TM None C3G TM UVR C3G M UVR Magnetic Trip Range, Amperes 1 HMAM 5685D48G TM None D60G TM UVR D48G TM None D60G TM UVR D60G M UVR D60G M UVR HNBM 17C36G TM None C37G TM UVR C36G TM None C37G TM UVR C37G M UVR V4-T-40 Volume 4 Circuit Protection CA E February 01

421 Specialty Breakers.5 Classic Mining Service Breaker Frames Only Breaker Type Trip Units for Classic Mining Circuit Breakers 1 Frame modified for left-hand mounting of UVR attachment. Frame modified for right-hand mounting of UVR attachment. 3 Three-pole trip units only are suitable for replacement in 1000 volt mining service circuit breakers amperes. Frame Size, Amperes of Poles Style s Breaker Type Frame Size, Amperes of Poles Style s KAM D86G11 MAM D43G D86G D43G1 KAMH D86G13 MAMH D43G D86G D43G14 HKAM C99G05 HMAM C99G03 LAM D99G05 NBM D64G D99G D64G08 LAMH D99G07 NBMH D64G D99G D64G10 HLAM C99G0 HNBM D64G13 LAM3600F D48G07 LAMH3600F D48G08 HLAM3600F D48G09 Breaker Type Conductor Size Magnetic Trip Range, Amperes Maximum Continuous Amperes Thermal-Magnetic Three-Pole 3 Style s Magnetic Only Three-Pole Style s HKAM # D99G #4 # D48G40 611D75G01 #4 # D48G34 611D75G0 HLAM #4 # D48G97 609D99G1 # #/ D48G8 611D75G03 HLAM600 # / D99G0 /0 500 kcmil D99G19 HMAM # #/ /0 500 kcmil D48G 611D75G04 4 #1 3/ /0 500 kcmil D48G16 611D75G05 HNBM /0 500 kcmil /0 500 kcmil D48G10 3/0 500 kcmil /0 500 kcmil D48G04 611D75G07 Volume 4 Circuit Protection CA E February 01 V4-T-41

422 .5 Specialty Breakers Terminals For Classic Mining Service Breakers Terminals are UL listed for wire type and range listed below. When used with aluminum conductors, use joint compound. Breaker Type Terminal Type Terminals For Mining Service Breakers Maximum Amperes Package of 3 Line Terminals Style Wire Range, Type FBM, HFBM Style pressure type terminals B100G0 #14 1/0 Al/Cu Breaker Type Optional Al/Cu pressure terminals 50 64B100G10 #14 #4 Al/Cu B100G17 # 4 4/0 Al/Cu Terminal Type Maximum Amperes Terminal Wire Range, Type of Cables KAM, HKAM Standard pressure terminals (copper only) 5 T5LA (1) #6 350 kcmil Optional Al/Cu pressure terminals 5 TA5LA1 (1) #6 350 kcmil Cu, or (1) #4 350 kcmil Al LAM Standard copper pressure terminals 5 T5LA (1) #6 350 kcmil Cu 400 T401LA (1) #4 50 kcmil Cu plus (1) 3/0 600 kcmil Cu Optional Al/Cu pressure terminals 5 TA5LA1 (1) #6 350 kcmil Cu, or (1) #4 350 kcmil Al 400 TA400LA1 (1) #4 50 kcmil Al/Cu, plus (1) 3/0 600 kcmil Al/Cu 400 TA401LA (1) kcmil Al LAM-600, LAMH-600, HLAM-600 Standard copper pressure terminals 600 T600LA () kcmil Cu Optional Al/Cu pressure terminals 600 TA600LA () kcmil Al/Cu MAM, HMAM, MAMH Standard copper pressure terminals 350 T350MA (1) #1 600 kcmil Cu 600 T600MA1 () /0 500 kcmil Cu 800 T800MA1 (3) 3/0 300 kcmil Cu Optional Al/Cu pressure terminals 600 TA700MA1 () #1 500 kcmil Al/Cu 800 TA800MA (3) 3/0 400 kcmil Al/Cu 800 TA801MA () kcmil Al/Cu NBM, HNBM, NBMH Standard copper pressure terminals 1000 T1000NB1 (3) 3/0 500 kcmil Cu 100 T100NB1 (4) 3/0 400 kcmil Cu Optional Al/Cu pressure terminals 1000 TA1000NB1 (3) 3/0 400 kcmil Al/Cu 100 TA100NB1 (4) 4/0 500 kcmil Al/Cu 100 TA101NB1 (3) kcmil Al/Cu V4-T-4 Volume 4 Circuit Protection CA E February 01

423 Specialty Breakers.5 Accessories Classic Mining Circuit Breakers Rear Connected Studs 1 For complete stud assembly, order a stud and tube based on thickness of customer s mounting panel. A short stud must be assembled adjacent to a long stud to maintain Mounting Panel Thickness In Inches (mm) Stud Length Style s clearances required by Underwriters Laboratories. Two studs required per pole. For List Prices, see Eaton s Price and Availability Digest. Tube Length In Inches (mm) Style s KAM, HKAM Breakers 0.75 (19.1) 1.00 (5.4) Short 656D565G (1.3) 456D983H05 Long 656D565G (96.0) 456D983H (1.7) 0.75 (19.1) Short 656D565G (7.7) 456D983H06 Long 656D565G (10.4) 456D983H (6.4) 0.50 (1.7) Short 656D565G (34.0) 456D983H07 Long 656D565G0 4.8 (108.7) 456D983H10 Rear Connected Studs For Insulated Panels Only: Two Per Pole Stud Ampere Diameter, In Inches (mm) and Thread Extension Back of Breaker In Inches (mm) Stud Style s LAM, HLAM Breakers (1.7) (81.8) (1.7) (159.5) (1.7) (16.) (19.1) (138.9) 05B7383G 0.75 (19.1) (0.4) 05B7383G (19.1) (65.9) 05B7383G (5.4) (150.1) 314C960G (5.4) (13.6) 314C960G (5.4) (77.1) 314C960G18 MAM, HMAM, MAMH Breakers (1.7) (93.0) 314C960G (19.1) (150.1) 314C960G (19.1) (13.6) 314C960G (19.1) (77.1) 314C960G (5.4) (150.1) 314C960G (5.4) (13.6) 314C960G (5.4) (77.1) 314C960G (8.7) (14.7) 314C960G (8.7) (13.6) 314C960G (8.7) (77.1) 314C960G1 NBM, HNBM, NBMH Breakers (8.7) (139.7) 63BG (8.7) (03.) 63BG (8.7) (66.7) 63BG (31.8) (139.7) 373B375G (31.8) (66.7) 373B375G03 Line and Load Terminal Shields 5 Breaker Type Description Style s KAM Line terminals 161C93G01 Load terminals 16C46G01 LAM-400 Line terminals 161C95G01 Load terminals 16C48G01 MAM Line terminals 161C97G01 Load terminals 161C97G0 1 Not UL Iisted. 400 ampere LA studs of the same length have sufficient clearance; however, customer connections may make it necessary to use a short stud adjacent to a long stud , 300 and 400 ampere frames only. 4 This is a special stud that includes six contact nuts for use where bus contact nuts must be used. 5 For breakers used with terminals and cable connections. Sold in packages of 10. Volume 4 Circuit Protection CA E February 01 V4-T-43

424 .5 Specialty Breakers Standard Handle Reset Undervoltage Release For Classic breakers field mountable on special frames listed on Page V4-T-45, or replacement on breakers originally equipped with this type UVR. For undervoltage protection. A solenoid device mounts within breaker case. Coil must be energized before closing breaker. Trips breaker Breaker Type Volts when voltage drops below 35 to 70% of coil rating. Picks up and seals in at 7 to 85% of coil rating. For line voltages up to 50 Vdc or 600 Vac. Externally mounted resistors are supplied for certain ratings. Standard leads extend inches (457. mm) outside of breaker. Longer leads may be specified. Style s Right-Hand Mounting LAM, HLAM 10 Vac 4995D1G11 10 Vac 1 18C76G03 40 Vac 4995D1G Vac 4995D1G14 15 Vdc 4995D1G09 MAM, HMAM, 10 Vac 567D69G11 MAMH 10 Vac 1 40 Vac 567D69G Vac 567D69G14 NBM, HNBM, 10 Vac 4995D11G11 NBMH 10 Vac 1 19C35G03 40 Vac 4995D11G Vac 4995D11G14 Left-Hand Mounting KAM, HKAM 10 Vac 4995D10G01 10 Vac 1 18C76G03 40 Vac 4995D10G Vac 4995D10G04 Shunt Trips For tripping breaker from a remote point. A solenoid device mounts within breaker case. Breaker trips when coil is energized. A cutoff switch breaks the circuit to the momentary rated coil when breaker opens. Available for Breaker Type 1 Electrical reset UVR. Auto reset type. Volts (50 60 Hz) control voltages up to 50 Vdc or 600 Vac. Voltage and frequency must be specified. Standard leads extend inches (457. mm) outside of breaker. Longer leads may be specified. Style s Right-Hand Mounting KAM, HKAM 480 Vac 605D15G16 40 Vac 605D15G17 10 Vac 605D15G19 LAM, HLAM 480 Vac 606D56G16 40 Vac 606D56G17 10 Vac 606D56G19 48 Vdc 606D56G07 MAM, HMAM, 480 Vac 606D57G16 MAMH 40 Vac 606D57G17 10 Vac 606D57G19 NBM, HNBM, NBMH 480 Vac 606D58G16 40 Vac 606D58G17 10 Vac 606D58G19 Left-Hand Mounting KAM, HKAM 480 Vac 605D15G0 40 Vac 605D15G03 10 Vac 605D15G05 LAM, HLAM 480 Vac 606D56G0 40 Vac 606D56G03 10 Vac 606D56G05 MAM, HMAM, 480 Vac 606D57G0 MAMH 40 Vac 606D57G03 NBM, HNBM, NBMH 10 Vac 606D57G Vac 606D58G0 40 Vac 606D58G03 10 Vac 606D58G05 V4-T-44 Volume 4 Circuit Protection CA E February 01

425 Specialty Breakers.5 Reference Information E Cross-Reference Mining 1491D7G D7G3 1491D7G33 Superseded by E Mining EJ3070T EJ3090T EJ3100T Mining FDBM3040 FDBM3045 FDBM3050 Superseded by E Mining EF3040 EF3045 EF D7G37 66C87G7 66C87G8 66C87G3 EKM3100 EKM3100U66 EKM315 EKM315U66 EKM3150 EKM3150MU66 EKM3150TM EKM3150U66 EKM300 EKM300U66 EKM35 EKM35F EKM35FUV EKM35MU66 EKM35TM EJ300T EK35AWU66 EK35DWU66 EK3400GWU66 EKEM3100W EKEM3100WU66 EKEM315W EKEM315WU66 EKEM3150W EKEM3150WU66 EKEM3150MW EKEM3150MWU66 EKEM300W EKEM300WU66 EKEM35W EKM3400F EKM3400F EKEM35MWU66 EKEM35TM FDBM3050U6 FDBM3050WU6 FDBM3060 FDBM3070 FDBM3070WU6 FDBM3080 FDBM3090 FDBM3100 FDBM3100LM04U6 FDBM315 FDBM3150 FDBM3150L FDM3015 FDM3015L FDM3015LU6 FDM300 FDM300LU6 FDM305 FDM305L EF3050U6 EF3050WU6 EF3060 EF3070 EF3070WU6 EF3080 EF3090 EF3100 EF3100M04U6 EF315 EF3150 EF3150L EF3015 EF3015L EF3015LU6 EF300 EF300LU6 EF305 EF305L EKM35U66 ELM3300U66 ELM3350U66 ELM3400U66 ELM3400F ELM3400FUV ELM3400MU66 ELM3400MU66 ELM3400U66 FDBM3015 FDBM3015WU6 FDBM300 FDBM305 FDBM305U6 FDBM3030 FDBM3030U6 FDBM3030WU6 FDBM3035 EKEM35WU66 ELEM3300WU66 ELEM3350WU66 ELEM3400WU66 ELM3600F ELM3600F ELEM3400MWU66 ELEM3400MWU66 ELEM3400WU66 EF3015 EF3015WU6 EF300 EF305 EF305U6 EF3030 EF3030WU6 EF3030WU6 EF3035 FDM305LS FDM305LU6 FDM3030 FDM3030LS FDM3040 FDM3040L FDM3040LU6 FDM3050 FDM3050LU6 FDM3050U6 FDM3060 FDM3060LU6 FDM3070 FDM3070A0U6 FDM3080 FDM3090 FDM3100 FDM3100LS EF305LS EF305LU6 EF3030 EF3030LS EF3040 EF3040L EF3040LU6 EF3050 EF3050LU6 EF3050U6 EF3060 EF3060LU6 EF3070 EF3070A0U6 EF3080 EF3090 EF3100 EF3100LS Volume 4 Circuit Protection CA E February 01 V4-T-45

426 .5 Specialty Breakers E Cross-Reference, continued Mining Superseded by E Mining FDM3100LU6 EFLU6 FDM315 EF315 FDM315LU6 EF315LU6 FDM3150 EF3150 HFDM003AM EF003AM HFDM003AMLU6 EF003AMLU6 HFDM007CM EF007CM HFDM007CMU6 EF007CMU6 HFDM015EM EF015EM HFDM015EMA0 EF015EMA0 Mining JDCM3150W JDCM3175W JDCM300W JDCM35A5W JDCM35D5W JDCM35W JDCM350A5MW JDCM350A5MWU18 JDCM350A5W JDCM350C5MW Superseded by E Mining EJM3150W EJM3175W EJM300W EJM35AW EJM35DW EJM35W EJM350MAW EJM350MAWU18 EJM350AW EJM350MCW HFDM015EMLU6 HFDM015EMU6 HFDM030HM HFDM030HMLU6 HFDM030HMU6 HFDM050KM HFDM050KML HFDM050KMLU6 HFDM050KMU6 HFDM070MM HFDM070MMU6 HFDM1001M HFDM1001MS HFDM100LM HFDM100LMA0 HFDM100LMU6 HFDM 100RM HFDM100RML HFDM100RMS EF015EMLU6 EF015EMU6 EF030HM EF030HMLU6 EF030HMU6 EF050KM EF050KML EF050KMLU6 EF050KMU6 EF070MM EF070MMU6 EF1001M EF1001MS EF100LM EF100LMA0 EF100LMU6 EF100RM EF100RML EF100RMS JDCM350D5MW JDCM350D5MWA06 JDCM350D5W JDCM350D5WS10 JDCM350F JDCM350F5MD01 JDCM350F5MW JDCM350G5MW JDCM350G5WA0D01 JDCM350J5MW JDCM350J5MWA0 JDCM350J5WA0D01 JDCM350J5WD01 JDCM350K5MW JDCM350L5MW JDCM350MW JDCM350W JDCMAAD1 JDCMDD1S30 EJM350MDW EJM350MDWA06 EJM350DW EJM350DWS10 EJM350F EJM350MFD01 EJM350MFW EJM350MGW EJM350MGA0D01 EJM350MJW EJM350MJA0 EJM350MJA0D01 EJM350MJD01 EJM350MKW EJM350MLW EJM350MW EJM350W EJM350MM0D01 EJM350MDS30D01 HFDM100RMU6 HFDM150TM HFDM150TML HFDM150TMU6 HFDM150UM JCDAD1S30 JCMAD1S30 JDCM3070W JDCM3090W JDCM3100W JDCM315W EF100RMU6 EF150TM EF150TML EF150TMU6 EF150UM EJM50MDAD1S30 EJM50MFAD1S30 EJM3070W EJM3090W EJM3100W EJM315W JDCMFD01 JDCMGA0D1 JDCMJAD1 JDCMJD01 JDM50F JDM3070W JDM3090W JDM3100W JDM315W JDM3150W JDM3150WU18 EJM350MFD01 EJM350MGA0D01 EJM350MJA0D01 EJM350MJD01 EJM350F EJ3070W EJ3090W EJ3100W EJ315W EJ3150W EJ3150WU18 V4-T-46 Volume 4 Circuit Protection CA E February 01

427 Specialty Breakers.5 E Cross-Reference, continued Mining Superseded by E Mining JDM3175W EJ3175W JDM300W EJ300W JDM300WA06 EJ300WA06 JDM35A5W EJ35AW JDM35D5W EJ35DW JDM35W EJ35W JDM350A5MW EJ350MAW JDM350A5W EJ350AW JDM350C5MW EJ350CW JDM350D5MW EJ350MDW Mining JM350TL5M_ JM350TM KDCM3100W KDCM315W KDCM3150W KDCM3175W KDCM300W KDCM35A5MW KDCM35D5MW KDCM35W Superseded by E Mining EJ350TML EJ350TM EKM3100W EKM315W EKM3150W EKM3175W EKM300W EKM300MAW EKM300MDW EKM35W JDM350D5W JDM350F JDM350F5MW JDM350G5MW JDM350J5MW JDM350K5MW JDM350L5MW EJ350DW EJ350F EJ350MFW EJ350MGW EJ350MJW EJ350MKW EJ350MLW KDCM350W KDCM350WU18 KDCM3300W KDCM3350W KDCM3400D5MA0D09H04 KDCM3400D5MW KDCM3400D5MWA0D07 EKM350W EKM350WU18 EKM3300W EKM3350W EKM3400MDA0D09H04 EKM3400MDW EKM3400MDA0D07 JDM350MW JDM350W JDM350WS10 JM5T JM3070T JM3090T JM3100T JM315T JM3150T JM3175T JM300T JM35T EJ350MW EJ350W EJ350WS10 EJ35T EJ3070T EJ3090T EJ3100T EJ315T EJ3150T EJ3175T EJ300T EJ35T KDCM3400D5W KDCM3400D5WD09 KDCM3400F KDCM3400F5MW KDCM3400FD09G04 KDCM3400G5MW KDCM3400G5MWD09H04 KDCM3400G5W KDCM3400G5WD07 KDCM3400J5MA0D09 KDCM3400J5MAD9G4S30 KDCM3400J5MD09 EKM3400DW EKM3400DD09 EKM3400F EKM3400MFW EKM3400MFD09G04 EKM3400MGD09G05 EKM3400MGD09H04 EKM3400MGW EKM3400MGD07 EKM3400MJA0D09 EKM3400MJAD9G4S30 EKM3400MJD09 JM35TA5 JM35TD5 JM350T JM350TA5 JM350TA5M_ JM350TC5M JM350TD5_ EJ35TA EJ35TD EJ350T EJ350TA EJ350TMA EJ350TMC EJ350TMD KDCM3400J5MD09H04S30 KDCM3400J5MW KDCM3400J5MWA0D07 KDCM3400J5MWA06 KDCM3400J5MWD07S30 KDCM3400J5WD07 KDCM3400K5MW EKM3400MJD09H04S30 EKM3400MJW EKM3400MJA0D07 EKM3400MJWA06 EKM3400MJD07S30 EKM3400MJD07 EKM3400MKW JM350TF5M_ JM350TG5M_ JM350TJ5M_ JM350TK5M_ EJ350TMF EJ350TMG EJ350TMJ EJ350TMK KDCM3400K5MWS10 KDCM3400K5MWU18 KDCM3400L5MW KDCM3400L5MWD09H04 EKM3400MKWS10 EKM3400MKWU18 EKM3400MLW EKM3400MLD09H04 Volume 4 Circuit Protection CA E February 01 V4-T-47

428 .5 Specialty Breakers E Cross-Reference, continued Mining KDCM3400L5MWS10 KDCM3400L5WD07 KDCM3400MW KDCM3400N5MW KDCM3400N5MWA06 KDCM3400N5WA0D07 KDCM3400R5MW KDCM3400W KDCM3400W5MW KDCMDMD07 Superseded by E Mining EKM3400MLWS10 EKM3400MLD07 EKM3400MW EKM3400MNW EKM3400MNWA06 EKM3400MNA0D07 EKM3400MRW EKM3400W EKM3400MWW EKM3400MDD07 Mining KDM3300WS10 KDM3350W KDM3400D5MW KDM3400D5W KDM3400D5WU18 KDM3400F KDM3400F5MW KDM3400FK37A06D09D18 KDM3400G5A06D09U18 KDM3400G5A13D09U18 Superseded by E Mining EK3300WS10 EK3350W EK3400MDW EK3400DW EK3400DWU18 EK3400F EK3400MFW EKE3400A06D09D18 EK3400GA06D09U18 EK3400GA13D09U18 KDCMNAD7 KDM400F KDM400G5MS50 KDM400G5MW KDM400W5MW KDM400W5MWA06D07S10 KDM400W5MWA06D10S10 KDM400W5MWD07 KDM400W5MWD07S10 KDM400W5MWD10 KDM400W5MWD10S10 KDM400W5MWS10 KDM3100W KDM315W KDM3150W KDM3150WA06 KDM3175W KDM300W KDM35A5W EKM3400MNA0D07 EK400F EK400MGWS50 EK400MGW EK400MWW EK400MWA06D07S10 EK400MWA06D10S10 EK400MWD07 EK400MWD07S10 EK400MWD10 EK400MWD10S10 EK400MWWS10 EK3100W EK315W EK3150W EK3150WA06 EK3175W EK300W EK35AW KDM3400G5MW KDM3400G5W KDM3400G5WA06 KDM3400G5WS10 KDM3400G5WU18 KDM3400J5MW KDM3400K5MS54 KDM3400K5MW KDM3400L5MW KDM3400MW KDM3400MWA06U18 KDM3400N5MW KDM3400R5MW KDM3400W KDM3400W5MW KEM3100T KEM315T KEM3150T KEM3150TM EK3400MGW EK3400GW EK3400GWS10 EK3400GWS10 EK3400GWU18 EK3400MJW EK3400MKWS54 EK3400MKW EK3400MLW EK3400MW EK3400MWA06U18 EK3400MNW EK3400MRW EK3400W EK3400MWW KEM3100T KEM315T KEM3150T KEM3150TM KDM35D5A13D09U18 KDM35D5MW KDM35D5W KDM35F KDM35W KDM35WK37 KDM35WK37U18 KDM35WK38 KDM350W KDM3300W KDM3300WA06U18 EK35DA13D09U18 EK3400MDW EK35DW EK3400F EK35W EKE35W EKE35WU18 EKE35MW EK350W EK3300W EK3300WA06U18 KEM300T KEM35T KEM35T KEM35TM KEM35TM KM5TA5 KM5TA5M KM5TD5 KM5TD5M KM400TD5 KM400TD5M KEM300T KEM35T KEM35T KEM35TM KEM35TM EK5TA EK400TMA EK5TD EK400TMD EK400TD EK400TMD V4-T-48 Volume 4 Circuit Protection CA E February 01

429 Specialty Breakers.5 E Cross-Reference, continued Superseded by Mining E Mining KM400TG5M KM400TN5M KM400TW5M KM3100T KM315T KM3150T KM3175T KM300T KM35T KM35TA5 KM35TA5M KM35TD5 KM35TD5M KM350T KM3300T KM3350T KM3400T KM3400TD5 KM3400TF5M KM3400TG5M KM3400TJ5M KM3400TK5M KM3400TL5M KM3400TM KM3400TN5M KM3400TR5M KM3400TW5M LDCM3600EMA05W LDCM3600F LDM3600F EK400TMG EK400TMN EK400TMW EK3100T EK315T EK3150T EK3175T EK300T EK35T EK35TA EK3400TMA EK35TD EK3400TMD EK350T EK3300T EK3350T EK3400T EK3400TD EK3400TMF EK3400TMG EK3400TMJ EK3400TMK EK3400TML EK3400TM EK3400TMN EK3400TMR EK3400TMW ELEM3600MA05W ELM3600F EL3600F Mining LEM3300T LEM3350T LEM3400T LEM3400T LEM3400TM LEM3400TM LEM3600T LEM3600TM LM3600TL6M LM3600TN6M LM3600TP6M LM3600TR6M LM3600TS6M LM3600TX6M UVE3LP08K UVE4LP08K Superseded by E Mining LEM3300T LEM3350T LEM3400T LEM3400T LEM3400TM LEM3400TM LEM3600T LEM3600TM EL3600TML EL3600TMN EL3600TMP EL3600TMR EL3600TM EL3600TMX UVE3LP08K UVE4LP08K Additional Information on Mining Breakers Source Description TD E E Mining Circuit Breaker Dimensional Data BR E E Mining Circuit Breaker Brochure TC E E Mining Circuit Breaker Time Current Curves Mining and Metals Volume 4 Circuit Protection CA E February 01 V4-T-49

430 .5 Specialty Breakers GFR Relay Contents Description Engine Generator Circuit Breakers Direct Current Circuit Breakers E Mining Service Circuit Breakers Classic Mining Breakers Add-On Ground Fault Protection Type GFR..... Product Selection Accessories Technical Data and Specifications PVGard Solar Circuit Breakers Page V4-T-374 V4-T-380 V4-T-393 V4-T-416 V4-T-430 V4-T-43 V4-T-43 V4-T-433 Add-On Ground Fault Protection Type GFR Product Description A Type GFR ground fault protection system, when properly installed on a grounded electrical system, will sense phase-to-ground fault currents. When the level of fault current is in excess of the pre-selected current pickup and time delay settings, the GFR relay will initiate a trip action of a disconnect device, which will open the faulted circuit and clear the fault. The GFR devices are UL Class I devices designed to protect electrical equipment against extensive damage from arcing ground faults. A basic Type GFR ground fault protection system consists of a ground fault relay, a ground fault current sensor and a disconnect device equipped with a shunt trip device. This disconnect device can be a molded case circuit breaker, a power circuit breaker, a bolted pressure switch or other fusible disconnect device, suitable for application with UL Class I ground fault sensing and relaying equipment. Note: Suitable for either surface or semi-flush mounting. Standards and Certifications Eaton s GFR ground fault relays, current sensors, test panels and accessory devices are UL listed by Underwriters Laboratories in accordance with their standard for ground fault sensing and relaying equipment, UL 1053, under File E Note: Relays are also listed with CSA under their file number V4-T-430 Volume 4 Circuit Protection CA E February 01

431 Specialty Breakers.5 Product Selection Each installation requires: One relay unit (select trip ampere as required) One current sensor (select configuration required) GFR Relay GFR Relay GFR Relay Types Typical Current Sensor Current Sensor Window Size in Inches (mm) One circuit breaker or disconnect device with shunt trip, or a shunt trip attachment for mounting in existing breaker Test panel (optional) 1 Suitable for either surface or semi-flush mounting. One end removable for installation. Ground Fault Pickup Amperes For 10 Volt 50/60 Hz Control Electrical reset with zone interlocking GFR1EI GFR60EI GFR100EI Electrical reset without zone interlocking GFR1E GFR60E GFR100E Mechanical reset with zone interlocking GFR1MI GFR60MI GFR100MI Mechanical reset without zone interlocking GFR1M GFR60M GFR100M For 10 Vdc Control Electrical reset with zone interlocking GFR100EID Electrical reset without zone interlocking GFR100ED Mechanical reset with zone interlocking GFR100MID Mechanical reset without zone interlocking GFR100MD Used with Relays Rated 1 1 Amperes 5.50 (139.7) I.D. 183C45G01 Used with Relays Rated 5 60 Amperes.50 (63.5) I.D. 179C768G (139.7) I.D. 156C13G x (198.4 x 79.4) Rect. 157C88G x 4.94 (84.1 x 760.5) Rect. 157C9G03 Used with Relays Rated Amperes.50 (63.5) I.D. 179C768G (139.7) I.D. 156C13G0 8.5 (09.6). I.D. 179C767G x (198.4 x 79.4) Rect. 157C88G x (5.5 x 430.3) Rect. 157C90G x 3.94 (5.5 x 608.1) Rect. 157C91G x (404.9 x 506.4) Rect. 157C89G x 4.94 (84.1 x 633.5) Rect. 157C9G x 9.64 (171.5 x 75.9) Rect. 155C39G03 Volume 4 Circuit Protection CA E February 01 V4-T-431

432 .5 Specialty Breakers Accessories Options Additional optional equipment can be added to the protection system to meet the requirements of the specifying engineer, including: Ground fault test panel Ground fault warning indicator relay Ground fault indicating ammeter GFR relays are available with zone selective interlocking circuitry to interlock several relays within the same system. This allows the relay which detects a ground fault to instantly clear the fault by tripping the disconnect device. The relay simultaneously sends a signal to relay units upstream from the fault to time delay or to block their operation completely. Current sensors in various designs provide a range of window sizes to accommodate standard bus and cable arrangements. Shunt trip attachments may be ordered for field mounting in Eaton s molded case circuit breakers, or may be ordered factory installed in the breaker. Test Panel (10 Vac) Used to test the ground fault system, to give an indication the relay has tripped the breaker, and to reset the relay after tripping. These functions may be separately mounted pilot devices. Note: When a mechanically reset relay is used with a test panel, both the relay and test panel must be reset following either a simulated ground fault test or actual ground fault. Not UL listed. Optional Test Panel Control Test 10 Volt 50/60 Hz Ground Fault Warning Indicator This is an accessory item for use with GFR relays with interlocking circuitry. At approximately 30 50% of the relay pickup setting, the indicator switches separate 10 Vac control power to a lamp or relay, (not included) to give an indication of a ground fault. The indicator is rated 110/10 Vac 50/60 Hz for a maximum indicator load of 0.5 amperes. Ground Fault Warning Indicator Description Manual reset Self-resetting 10 Volt 50/60 Hz GFRTP 134C67G01 134C67G0 Indicating Ammeter The optional indicating ammeter connects to the sensor terminals through a momentary contact pushbutton, and will indicate (in amperes) any ground fault current flowing through the sensor. Kit includes the ammeter and pushbutton. Note: Not UL listed. Ammeter Kit GFR System Used with Shunt Trip Attachments Use 10 Vac shunt trips. Faceplate Recommended when these relays are semi-flush mounted, to close the door cutout opening. Face Plate Kit 1 1 ampere 75B80G ampere 75B80G ampere 75B80G03 Description Faceplate 75B410G01 Technical Data and Specifications Sensor 600 volt, 50/60 Hz maximum system voltage Electrical s GFR Relay Ground fault detection ranges: 1 to 1, 5 to 60 or 100 to 100 amperes Output contacts: 40 volt, 50/60 Hz: 3.0 amperes 10 volt, 50/60 Hz: 6.0 amperes 8 Vdc: 3.0 amperes 15 Vdc: 0.5 amperes Control power requirements: 10 volt, 50/60 Hz or 15 Vdc (optional) V4-T-43 Volume 4 Circuit Protection CA E February 01

433 Specialty Breakers.5 PVGard Solar Photovoltaic Circuit Breakers PVGard Solar Circuit Breakers Product Description Thermal-magnetic circuit breakers Designed to meet UL 489B for solar photovoltaic circuit protection Rated for 100% continuous current at 50 C ambient temperature Requires poles in series connection Application Description Photovoltaic (PV) systems convert the energy of the sun into electrical power that is fed directly into the electric grid. The DC circuit breaker is a key component in the solar installation. PVGard DC circuit breakers are used to protect the wiring from the modules to the combiner box or inverter from overcurrents. Each breaker has its own handle for disconnecting means. One circuit breaker is used per 1000 Vdc load. Eaton offers a complete line of 600 Vdc circuit breakers, as well as protection for the AC side of the inverter. Refer to Page V4-T-380 for 600 Vdc breakers and Page V4-T-6 for AC breaker selection. Contents Description Engine Generator Circuit Breakers Direct Current Circuit Breakers E Mining Service Circuit Breakers Classic Mining Breakers Add-On Ground Fault Protection Type GFR..... PVGard Solar Circuit Breakers Dimensions Wiring Diagrams Product Selection Accessories Features PVGard breakers are uniquely designed with these features: Meets the higher voltage and lower fault current levels of solar systems Tested to extreme ambient conditions from 40ºC to +90ºC Optional shunt trip on signal from PVGard DC arc fault detector Page V4-T-374 V4-T-380 V4-T-393 V4-T-416 V4-T-430 V4-T-434 V4-T-434 V4-T-435 V4-T-436 Standards and Certifications UL File E7819, Category Control DIUR Volume 4 Circuit Protection CA E February 01 V4-T-433

434 .5 Specialty Breakers Quick Reference PVGard Solar Circuit Breakers UL 489B Interrupting Capacity (ka) 1000 Vdc Circuit Breaker Type Minimum Amps Maximum Amps ka Poles in Series HFD-PV HKD-PV LGH-PV HMDL-PV Dimensions Approximate Dimensions in Inches (mm) PVCGard Solar Circuit Breakers Frame of Poles Width Height Depth HFD-PV (139.7) 6.00 (15.4) 3.38 (86.0) HKD-PV 4 7. (183.4) (57.3) 4.10 (104.1) LGH-PV 4 7. (183.4) (57.3) 4.09 (103.9) HMDL-PV (09.6) (406.4) 4.06 (103.1) Wiring Diagrams onnection Diagrams for DC Application 1 HFD-PV, HKD-PV, LGH-PV 1000 Vdc Maximum Four Poles in Series HMDL-PV 1000 Vdc Maximum Three Poles in Series Load (A) Load Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. Load (A) Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. Suitable for use on ungrounded systems only. Suitable for use on ungrounded systems only. 1 Poles in series connection is customer supplied. Use rated cable per NEC. For grounded systems, all poles in series must be connected on non-grounded terminal, with load connected to grounded terminal. Load V4-T-434 Volume 4 Circuit Protection CA E February 01

435 Specialty Breakers.5 Product Selection number includes breaker frame and trip unit. Order terminals separately. See Page V4-T-438. HFD-PV Frame HKD-PV Frame LGH-PV Frame HMDL-PV Frame HFD-PV Frame, 100A Maximum, 1000 Vdc, 1.5 ka 1 Current Amperes Poles in Series Trip Unit 15 4 Fixed thermal, fixed magnetic HFDPV4015W 0 4 Fixed thermal, fixed magnetic HFDPV400W 5 4 Fixed thermal, fixed magnetic HFDPV405W 30 4 Fixed thermal, fixed magnetic HFDPV4030W 40 4 Fixed thermal, fixed magnetic HFDPV4040W 50 4 Fixed thermal, fixed magnetic HFDPV4050W 60 4 Fixed thermal, fixed magnetic HFDPV4060W 70 4 Fixed thermal, fixed magnetic HFDPV4070W 80 4 Fixed thermal, fixed magnetic HFDPV4080W 90 4 Fixed thermal, fixed magnetic HFDPV4090W Fixed thermal, fixed magnetic HFDPV4100W HKD-PV Frame, 50A Maximum, 1000 Vdc, 3 ka 1 Current Amperes Poles in Series Trip Unit 15 4 Fixed thermal, fixed magnetic HKDPV415W Fixed thermal, fixed magnetic HKDPV4150W Fixed thermal, fixed magnetic HKDPV4175W 00 4 Fixed thermal, fixed magnetic HKDPV400W 5 4 Fixed thermal, fixed magnetic HKDPV45W 50 4 Fixed thermal, fixed magnetic HKDPV450W LGH-PV Frame, 400A Maximum, 1000 Vdc, 3 ka 1 Current Amperes Poles in Series Trip Unit 50 4 Fixed thermal, fixed magnetic LGHPV450W Fixed thermal, fixed magnetic LGHPV4300W Fixed thermal, fixed magnetic LGHPV4350W Fixed thermal, fixed magnetic LGHPV4400W HMDL-PV Frame, 600A Maximum, 1000 Vdc, 5 ka 1 Current Amperes Poles in Series Trip Unit Fixed thermal, fixed magnetic HMDLPV3300W Fixed thermal, fixed magnetic HMDLPV3350W Fixed thermal, fixed magnetic HMDLPV3400PV Fixed thermal, fixed magnetic HMDLPV3450W Fixed thermal, fixed magnetic HMDLPV3500W Fixed thermal, fixed magnetic HMDLPV3600W Note 1 Terminals not included with frames. Volume 4 Circuit Protection CA E February 01 V4-T-435