Eaton s Cutler-Hammer

Size: px
Start display at page:

Download "Eaton s Cutler-Hammer"

Transcription

1 Alltid Always tillgänglig available - Alltid öppen! - Always open!

2 A New Generation of Moulded Case Circuit Breakers Eaton s Cutler-Hammer offer a complete range of Moulded Case Circuit Breakers - MCCBs A in three frame sizes. Each frame size offers a choice of several breaking capacities up to 100 ka at 400 VAC. The MCCB:s are designed to conform with all major international standards including IEC and UL 489/CSA C22.2 No 5.1. The performance is third party certifi ed by KEMA, UL and CSA. KEMA, UL and CSA are independent third party test houses which assure that Eaton s Cutler-Hammer MCCB:s meet their exacting standards through regularly scheduled follow-up testing and inspection. Innovative design and an optimum of performance The fl exibility and outstanding performance characteristics of Eaton s Cutler-Hammer MCCBs are made possible by the most logically designed contact assemblies. Based on the patented contact design, the contact assembly creates a high speed blow-open action when it confronts the electromechanical forces produced by a high-level fault current. Breaking Capacity, Icu at 400 VAC, ka E B S EG frame H E S H JG frame C C E S H LG frame Three frame sizes cover A, breaking capacity from ka at 400 VAC The MCCBs carry both UL, CSA and KEMA-KEUR certifi cation as standard. Cascading and discrimination The current limiting capacity reduces the rated breaking capacity required for the other circuit breakers installed downstream. With Eaton s Cutler-Hammer MCCBs, a high level of discrimination in a distribution system is achieved. When a fault occurs, only the MCCB located immediately upstream is tripped. Protect IEC/NEC, the new discrimination software, includes the complete range of protective devices from Eaton s Cutler-Hammer. Protect IEC/NEC is easy to use and drastically reduces the time spent on discrimination studies. Additional information as cascading rating sheets as well as time/ current curves can be downloaded from our web site,. Same MCCBs for IEC and North American applications Eaton s Cutler-Hammer Series G MCCBs are for truly global use with UL/CSA/KEMA-KEUR approvals as standard. Series G MCCBs are UL 489 listed and meet the requirements in National Electrical Code (NEC) for Branch Circuit Protection, Motor Branch Circuit Protection and as Disconnecting Means. Operating mechanism meets the requirements for mechanical interlocking according to NFPA 79. Unmatched protection and flexibility All Eaton s Cutler-Hammer MCCBs are current limiting. High speed opening and the electromagnetic repulsion forces in combination with the incorporation of sophisticated arc extinguishing technique limit energy developed by the short-circuit current to very low values. A wide selection of trip units for different applications are available, thermal-magnetic and Digitrip electronic types, with or without earth fault protection. Digitrip trip units detect earth fault currents through residual sensing, they are not designed for zero sequence. Earth leakage modules, based on zero sequence sensing, with a built-in current sensor are also available. This technique allows for protective sensitivities down to 30 ma levels. Earth leakage MCCBs are available up to 630 A and according to IEC and UL standard. Information regarding Series G MCCBs A are availabe in a separate cataloge! 2

3 A Complete System for Unmatched Flexibility... Eaton s Cutler-Hammer N 0 F F I T E S T T E S T WARNING reset test I ON OFF O ON/I Trip OFF/O ON/I Trip OFF/O 25 ON OFF Circuit breaker 2 Thermal magnetic trip unit, integrated on EG frame 3 Magnetic only trip unit, integrated on EG frame 4 Electronic protection trip unit, JG/LG frame only 5 Auxiliary/alarm contact 6 Shunt trip 7 Undervoltage release 8 DIN-rail mounting adaptor, EG frame only 9 Plug-in block 10 Terminal cover 11 Terminal end cover 12 Interphase barrier 13 Control wire kit 14 Multiwire connector 15 Steel cable terminal 16 Aluminium/copper terminal 17 Terminal spreader 18 Endcap kit 19 Earth leakage module, side mounted on EG frame 20 Padlockable handle lock hasp 21 Padlockable handle block 22 Motor operator 23 Direct close coupled handle mechanism 24 Through-the-door handle mechanism 25 Flexshaft handle mechanism 3

4 Program Overview see note 1, 2, 3, 4, 5, 6 EG frame JG frame LG frame B E S H E S H C E S H C Breaking capacity, IEC VAC Icu Ics VAC Icu Ics VAC Icu Ics VDC Icu Ics Breaking capacity, UL VAC VAC Y/347 VAC VAC General Rated voltage Ue IEC , V 500, Rated voltage UL 489, V 480, 600Y/ Current range In, A / /630 Utilization category, IEC A A A Trip units Type Fixed trip units Interchangeable trip units Interchangeable trip units Thermal magnetic FT-FM, AT-FM FT-AM, AT-AM FT-AM, AT-AM Magnetic only, starter combination AM AM AM Electronic LS, LSI, LSG, LSIG LS, LSI, LSG, LSIG A is max UL rating for EG frame. 600 A is max UL rating for LG frame. 2 DC ratings are based on two poles in series. 3 MCCBs with Straight voltage rating have been tested for use in a circuit where the nominal voltage between any two conductors does not exceed the voltage rating of the MCCB. The slash (/) between the higher and lower voltage ratings indicates that the MCCB has been tested for use in a circuit with higher voltage between phases and with the lower voltage to ground. EG-frame MCCBs have been tested for 600Y/347 and 480 V Straight per UL 489. Contact CHS Controls for application assistance. 4 See page 20 for breaking capacity for starter combination breakers. 5 Available protection types. Curves are available at. FT-FM Fixed thermal, fi xed magnetic LS Long delay and short delay protection AT-FM Adjustable thermal, fi xed magnetic LSI Long delay, short delay and instantaneous protection FM-AM Fixed thermal, adjustable magnetic LSG Long delay, short delay and earth fault protection AT-AM Adjustable thermal, adjustable magnetic LSIG Long delay, short delay, instantaneous and earth fault protection AM Adjustable magnetic, starter combination 6 Electronic trip units are not suitable for DC applications. 4

5 9 0 Technical Data Moulded Case Circuit Breakers Eaton s Cutler-Hammer Frame size EG JG LG General Current range, In IEC , A Current range, In UL 489, A Utilization category, IEC A A A Number of poles 1, 2, 3, 4 2, 3, 4 3, 4 Rated operational voltage, Ue, IEC , V 500, Rated operational voltage, Ue, UL 489, V 480, 600Y/ Rated insulation voltage, Un, IEC , V Rated impulse withstand voltage, Uimp, IEC , kv Breaking Capacity IEC UL 489 See product overview on page 4 and product selection See product overview on page 4 and product selection Moulded Case Switch (MCS) Breaking capacity at 415 VAC, unfused, ka Breaking capacity at 480 VAC, unfused, ka Self protected, will trip above, A 1250/ /6300 Environmental Permissible ambient temperature, C Power losses, plant protection/isolating/starter combination, W 50/40/40 75/75/45 255/160/160 Operation, Endurance Main switch characteristic, IEC Yes, in combination with locable rotary device Suitable for reverse feed see note 7 Yes Yes Yes Opening time, ms <50 <50 <50 Maximum switching frequency, operation/hour Endurance, operating cycles Permissible Loads for Various Ambient Temperatures MCCBs for plant protection see note 8 At 40 C 100/100% 100/100% 100/100% At 50 C 96/92% 96/94% 96/91% At 55 C 93/87% 94/90% 93/86% At 60 C 91/83% 92/87% 90/82% At 70 C 86/73% 88/80% 84/70% MCCBs for starter combinations/mcs At 40 C 100% 100% 100% At 50 C 100% 100% 100% At 55 C 96% 96% 95% At 60 C 91% 92% 90% At 70 C 86% 88% 84% Permissible Mounting Positions Weights 3 pole, kg 1,4 5,2 7,3 4 pole, kg 1,8 7 9,1 Approvals KEMA-KEUR Certifi cate No Pending, available in June 2005 MCCBs for plant protection only UL 489/508/1076 File E7819 E7819 E7819 CSA C22.2 File LR43556 LR43556 LR EG frame MCCB for starter combinations (HMCPE) can not be used for reverse feed 8 First fi gure: thermal trip set to the lower value, second fi gure: thermal trip set to the upper value. 5

6 Technical Data - Electronic Trip Units see note 6, 9 LS protection LSG protection LSI protection LSIG protection Sensing method RMS RMS RMS RMS Overtemperature protection Yes Yes Yes Yes Overload protection, long time delay (L) Long delay setting, Ir 0,5-1 x In 0,5-1 x In 0,5-1 x In 0,5-1 x In Long delay time I 2 t at 6 x Ir 2-24 s 2-24 s 2-24 s 2-24 s Long delay thermal memory Yes Yes Yes Yes Short circuit protection, short time delay (S) Short delay setting % x In % x In % x In % x In Short delay time I 2 t 100 ms 100 ms No No Short delay time fl at No No I-300 ms I-300 ms Short circuit protection, instantaneous (I) Instantaneous setting see note 10 No No % x In % x In Instantaneous override Yes Yes Yes Yes Eath fault protection (G) Earth fault protection No Yes No Yes Earth fault delay, fl at No I, 120 ms No I, 120 ms Field testing External test set External test set External test set External test set DC Applications The MCCBs with thermal magnetic trip units are suitable for switching DC currents. MCCBs with electronic trip units should not be used. For switching DC currents, however the maximum permissible voltage per conducting path has to be considered. For voltages higher than 250 VDC, the series connection of two or three conducting paths are required, see proposed circuits for 3 and 4 pole MCCBs below. As the current has to fl ow through all conducting paths so as to maintain the thermal tripping characteristics, the following circuit arrangements are recommended. With DC, the trip values of the instantaneous short circuit release is increased by 30-40%. Double-pole switching max 250 VDC Double-pole switching - earth system, max 440 VDC Single-pole switching - earth system, max 600 VDC Single-pole switching - earth system, max 750 VDC M M M M If there is no risk of an earth fault, or if any earth fault which occurs is immediately eliminated (earth fault monitoring), the max permissible voltage can be 600 VDC. The earthed pole must always be assigned to the individual conducting path, so that two paths are always in series in case of an earth fault. Three conducting paths in series. The earthed pole must be assigned to the nonswitched conducting path. Four conducting paths in series. The earthed pole must be assigned to the nonswitched conducting path. 6 Electronic trip units are not suitable for DC applications. 9 Curves are available at. 10 JG frame has also a 1400% setting. 6

7 Internal Accessories Series G MCCBs can be equipped with a number of internal accessories, auxiliary switches, alarm switches, shunt trip and undervoltage release. Auxiliary switches Available with one or two changeover contacts. They indicate if the MCCB is in closed or open position. Alarm switches Available with one or two changeover contacts. They indicate if the MCCB is in tripped position. MCCB Toggle position Off/Reset On Tripped Auxiliary switch position Contact position by the auxiliary and alarm switches as a function of the switching position of the MCCB Combination switches Consist of one changeover alarm switch and one changeover auxiliary contact. Shunt trip Shunt trip is used for remote tripping of the MCCB. The shunt trip coil is only rated for short time operation and should not be used in control circuits with a continuous command. The shunt trip has built-in cut-off switch to prevent coil burnout. Undervoltage release The MCCB can not be closed until the undervoltage release is energized. If the undervoltage release is not energized, the MCCB can only perform an idle switching operation. Idle operation should be avoided as they shorten the endurance of the MCCB. 3 pole MCCB 4 pole MCCB Alarm switch position Left Right Left Right Technical Data - Auxiliary/Alarm Switches General Rated thermal current, Ith, A 6 Rated making capacity, A 20 Rated insulating voltage Un, V 690 Rated impulse withstand voltage Uimp, kv 4 Electrical Data, Utilization Category AC-15, IEC Rated operational voltage, VAC 230/400/600 Rated operational current, A 6/3/0,25 Back up fuse class gg 6/4/4 Miniature circuit breaker, B-curve 6/4/- Electrical Data, Utilization Category DC-13, IEC Rated operational voltage, VDC 125/250 Rated operational current, A 0,5/0,25 Back up fuse class gg 6/4 Miniature circuit breaker, B-curve 6/4 Technical Data - Shunt Trip/Undervoltage Trip Shunt Trip Response voltage, pick-up, Us % Opening time <50 ms Power consumption short time operation 120 VAC <435 VA 240 VAC <435 VA VAC <1050 VA 24 VDC <635 W 48 VDC <1580 W Undervoltage Release Response voltage, drop Us 35-70% Response voltage, pick-up, Us % Opening time <50 ms Power consumption, continuous operation 24 VAC <4 VA 48 VAC <4 VA 120 VAC <2,5 VA VAC <4 VA VAC <6 VA VAC <4,5 VA 24 VDC <3,1 W 48 VDC <3,1 W 120 VDC <2,2 W VDC <4 W U< 1/2 AUX 1/2 AS U< 1/2 AUX U< U< 1/2 AS U< 1 AS + 1 AUX U< 1 AS + 1 AUX U< Shunt trip/undervoltage release AUX = Auxiliary switch AS = Alarm switch Accessory alternatives - one of above combinations, insulated accessory chambers 7

8 Moulded Case Circuit Breakers for Plant Protection, EG Frame A, IEC/UL/CSA Breaker Capacity see note 3, 11 Breaking capacity, ka Breaker Rated voltage, Ue, VAC IEC , Icu/Ics, VAC UL 489/CSA, VAC type IEC UL/CSA Y/347 B /25 18/ E 500, Y/347 35/35 25/25 3/ S 500, Y/347 85/43 40/30 4/ H 500, Y/ /50 70/35 6/ Catalogue Numbers, 3 Pole MCCB with Thermal-Magnetic Trip Unit see note 12, 13, 14, 15, 16, 17 Rated Adjustable range current Thermal Magnetic Catalogue numbers, complete breakers In, A Ir, A Im, A Type B Type E Type S Type H 15 Fixed Fixed EGB3015FFG EGE3015FFG EGS3015FFG EGH3015FFG 16 Fixed Fixed EGB3016FFG EGE3016FFG EGS3016FFG EGH3016FFG 20 Fixed Fixed EGB3020FFG EGE3020FFG EGS3020FFG EGH3020FFG 25 Fixed Fixed EGB3025FFG EGE3025FFG EGS3025FFG EGH3025FFG 30 Fixed Fixed EGB3030FFG EGE3030FFG EGS3030FFG EGH3030FFG 32 Fixed Fixed EGB3032FFG EGE3032FFG EGS3032FFG EGH3032FFG 35 Fixed Fixed EGB3035FFG EGE3035FFG EGS3035FFG EGH3035FFG 40 Fixed Fixed EGB3040FFG EGE3040FFG EGS3040FFG EGH3040FFG 45 Fixed Fixed EGB3045FFG EGE3045FFG EGS3045FFG EGH3045FFG 50 Fixed Fixed EGB3050FFG EGE3050FFG EGS3050FFG EGH3050FFG 60 Fixed Fixed EGB3060FFG EGE3060FFG EGS3060FFG EGH3060FFG 63 Fixed Fixed EGB3063FFG EGE3063FFG EGS3063FFG EGH3063FFG 70 Fixed Fixed EGB3070FFG EGE3070FFG EGS3070FFG EGH3070FFG 80 Fixed Fixed EGB3080FFG EGE3080FFG EGS3080FFG EGH3080FFG 90 Fixed Fixed EGB3090FFG EGE3090FFG EGS3090FFG EGH3090FFG 100 Fixed Fixed EGB3100FFG EGE3100FFG EGS3100FFG EGH3100FFG 125 Fixed Fixed EGB3125FFG EGE3125FFG EGS3125FFG EGH3125FFG 160 Fixed Fixed EGB3160FFG EGE3160FFG EGS3160FFG EGH3160FFG Fixed EGB3020AFG EGE3020AFG EGS3020AFG EGH3020AFG Fixed EGB3025AFG EGE3025AFG EGS3025AFG EGH3025AFG Fixed EGB3032AFG EGE3032AFG EGS3032AFG EGH3032AFG Fixed EGB3040AFG EGE3040AFG EGS3040AFG EGH3040AFG Fixed EGB3050AFG EGE3050AFG EGS3050AFG EGH3050AFG Fixed EGB3063AFG EGE3063AFG EGS3063AFG EGH3063AFG Fixed EGB3080AFG EGE3080AFG EGS3080AFG EGH3080AFG Fixed EGB3100AFG EGE3100AFG EGS3100AFG EGH3100AFG Fixed EGB3125AFG EGE3125AFG EGS3125AFG EGH3125AFG 125 Moulded case switch EGK3125KSG Fixed EGB3160AFG EGE3160AFG EGS316AFFG EGH3160AFG 160 Moulded case switch EGK3160KSG 8

9 Catalogue Numbers, 4 Pole MCCB with Thermal-Magnetic Trip Unit see note 12, 13, 14, 15, 16, 17, 18 Rated Adjustable range current Thermal Magnetic Catalogue numbers, complete breakers In, A Ir, A Im, A Type B Type E Type S Type H 15 Fixed Fixed EGB4015FFG EGE4015FFG EGS4015FFG EGH4015FFG 16 Fixed Fixed EGB4016FFG EGE4016FFG EGS4016FFG EGH4015FFG 20 Fixed Fixed EGB4020FFG EGE4020FFG EGS4020FFG EGH4020FFG 25 Fixed Fixed EGB4025FFG EGE4025FFG EGS4025FFG EGH4025FFG 30 Fixed Fixed EGB4030FFG EGE4030FFG EGS4030FFG EGH4030FFG 32 Fixed Fixed EGB4032FFG EGE4032FFG EGS4032FFG EGH4032FFG 35 Fixed Fixed EGB4035FFG EGE4035FFG EGS4035FFG EGH4035FFG 40 Fixed Fixed EGB4040FFG EGE4040FFG EGS4040FFG EGH4040FFG 45 Fixed Fixed EGB4045FFG EGE4045FFG EGS4045FFG EGH4045FFG 50 Fixed Fixed EGB4050FFG EGE4050FFG EGS4050FFG EGH4050FFG 60 Fixed Fixed EGB4060FFG EGE4060FFG EGS4060FFG EGH4060FFG 63 Fixed Fixed EGB4063FFG EGE4063FFG EGS4063FFG EGH4063FFG 70 Fixed Fixed EGB4070FFG EGE4070FFG EGS4070FFG EGH4070FFG 80 Fixed Fixed EGB4080FFG EGE4080FFG EGS4080FFG EGH4080FFG 90 Fixed Fixed EGB4090FFG EGE4090FFG EGS4090FFG EGH4090FFG 100 Fixed Fixed EGB4100FFG EGE4100FFG EGS4100FFG EGH4100FFG 125 Fixed Fixed EGB4125FFG EGE4125FFG EGS4125FFG EGH4125FFG 160 Fixed Fixed EGB4160FFG EGE4160FFG EGS4160FFG EGH4160FFG Fixed EGB4020AFG EGE4020AFG EGS4020AFG EGH4020AFG Fixed EGB4025AFG EGE4025AFG EGS4025AFG EGH4025AFG Fixed EGB4032AFG EGE4032AFG EGS4032AFG EGH4032AFG Fixed EGB4040AFG EGE4040AFG EGS4040AFG EGH4045AFG Fixed EGB4050AFG EGE4050AFG EGS4050AFG EGH4050AFG Fixed EGB4063AFG EGE4063AFG EGS4063AFG EGH4063AFG Fixed EGB4080AFG EGE4080AFG EGS4080AFG EGH4080AFG Fixed EGB4100AFG EGE4100AFG EGS4100AFG EGH4100AFG Fixed EGB4125AFG EGE4125AFG EGS4125AFG EGH4125AFG Fixed EGB4160AFG EGE4160AFG EGS416AFFG EGH4160AFG 3 MCCBs with Straight voltage rating have been tested for use in a circuit where the nominal voltage between any two conductors does not exceed the voltage rating of the MCCB. The slash (/) between the higher and lower voltage ratings indicates that the MCCB has been tested for use in a circuit with higher voltage between phases and with the lower voltage to ground. EG-frame MCCBs have been tested for 600Y/347 and 480 V Straight per UL 489. Contact CHS Controls for application assistance VAC rating only apply to 160 A MCCBs. 12 Contact CHS Controls for 1-pole and 2-pole MCCBs. 13 Replace suffi x G with W for no line and load terminals. Example: EGB3100FAG will be EGB3100FAW 14 The MCCBs are calibrated at 40 C ambient temperature. MCCBs calibrated for 50 C ambient temperature are also available, add suffi x V to the end of the catalogue number. Example: EGB3100FAG will be EGB3100FAGV. 50 C calibrated MCCBs are not UL/CSA approved. MCCBs with electronic trip units can operate reliably at 50 C ambient temperature , 32, 63 and 160 A MCCBs as well as MCCBs with adjustable thermal trip are not UL/CSA approved. 16 Moulded case switches are self protected, see page 5 for trip levels. 17 M4 hardware is included pole MCCBs have unprotected neutral. Replace the fourth character by 7 for 100% protected neutral. Example: EGB4100FAG will be EGB7100FAG. 9

10 Earth Leakage Modules for EG Frame MCCBs, Side Mounted Eaton s Cutler-Hammer Rated Rated current voltage Pickup Time Alarm contacts In, A Un, VAC Poles Standard setting, A Delay, s Earth fault level Catalogue numbers reset test IEC 0,03-10 Inst.-1 50/100% ELEBLE3125W IEC 0,03-10 Inst.-1 50/100% ELEBE4125W Terminals, Installation Accessories for EG Frame MCCBs see note 19, 20, 21 3T125EF 3TA125EF 3TA150EF Description Terminals for Cu/Al cond., pressure type, 125 A, 2,5-95 mm 2 /AWG 14-3/0, kit of 3 Terminals for Cu/Al cond., pressure type, 125 A, 2,5-50 mm 2 /AWG 14-1/0, kit of 3 Terminals for Cu/Al cond., pressure type, 160 A, mm 2 /AWG 6-3/0, kit of 3 Terminals for Cu/Al cond., pressure type, 160 A, mm 2 /AWG-kcmil 3-250, kit of 3 Terminals for Cu/Al cond., pressure type, 160 A, mm 2 /AWG-kcmil 3-250, kit of 4 Catalogue numbers 3T125EF, included 3TA125EF 3TA150EF, included 3TA160EFK 4TA160EFK 3TA160EFK Multiwire teminal Endcap kit GCWTK Endcap kit for busbar/cable lugs, 3 pole, metric hardware Endcap kit for busbar/cable lugs, 4 pole, metric hardware Endcap kit for busbar/cable lugs, 3 pole, imperial hardware Endcap kit for busbar/cable lugs, 4 pole, imperial hardware Multiwire connectors for Cu cond., 125 A, 3 wires, 2,1-13 mm 2 /AWG 14-6, kit of 3 Multiwire connectors for Cu cond., 125 A, 6 wires, 2,1-13 mm 2 /AWG 14-6, kit of 3 Control wire terminal kit, only for use with 3T125EF terminals, 12 pcs per package Spreader, pole cc=35,4 mm, 3 pole, hardware not included, use endcap kit Spreader, pole cc=35,4 mm, 4 pole, hardware not included, use endcap kit Terminal shields, ingress protection IP 30, 3 pole EF3RTWK EF4RTWK EF3RTDK EF4RTDK 3TA100E3K 3TA100E6K GCWTK EFTEW3 EFTEW4 EFTS3K Spreader Interphase barrier Terminal shields, ingress protection IP 30, 4 pole Terminal end cover, 3 pole, conductor opening 6,4 mm, 10 pcs per package Terminal end cover, 3 pole, conductor opening 10,4 mm, 10 pcs per package Interphase barriers, 2 pcs per package Mounting adapter for 35mm DIN rail, for 3 pole and 4 pole MCCBs EFTS4K EEC3K EEC4K EIPBK EF34DIN Terminal shield Terminal end cover Plug-in Blocks for EG Frame Breakers see note 22 Plug-in block for 3 pole breaker, including breaker terminals and trip-on drawout interlock Plug-in block for 4 pole breaker, including breaker terminals and trip-on drawout interlock PAD3E PAD4E 19 3TA160EFK and 4TA160EFK, terminal cover is included. 20 Multiwire terminals only to be used on 3 pole MCCBs, terminal cover is included. 21 Terminal 3T125EF is made of steel. Terminals 3TA125EF, 3TA150EF, 3TA160EFK and 4TA160EFK are made of aluminium. 22 Plug-in block can be installed either on or partly behind mounting plate. Rear terminal stabs are included. Stabs can be converted to front terminals. 10

11 I Eaton s Cutler-Hammer Internal Accessories for EG Frame MCCBs see note 23 Aux/alarm switch Shunt trip Undervoltage release Description Auxiliary contact, 1 change-over contact Auxiliary contact, 2 change-over contacts Alarm contact, 1 change-over contact Alarm contact, 2 change-over contacts Combination auxiliary and alarm contact, 1 change-over contact of each Shunt trip, 120 VAC Shunt trip, 240 VAC Shunt trip, VAC Shunt trip, VDC Undervoltage release, 120 VAC Undervoltage release, VAC, VAC Undervoltage release, VAC Undervoltage release, 24 VAC/VDC Undervoltage release, 48 VAC Undervoltage release, 48 VDC Undervoltage release, 120 VDC Catalogue Number AUX1A1BPK AUX2A2BPK ALM1M1BEPK ALM2M2BEPK AUXALRMEPK SNT120CPK SNT120CPK SNT480APK SNT060CPK UVR120APK UVR480APK UVR600APK UVR024CPK UVR048APK UVR048DPK UVR125DPK External Accessories for EG Frame MCCBs see note 24, 25, 26 OFF/O Trip ON/I Direct rotary handle OFF/O Trip ON/I Rotary through-the-door handle Flexshaft mechanism, fl ange mounted ON OFF O Motor operator ON OFF Direct (close-coupled) rotary handle Direct (close-coupled) rotary handle with door interlock Rotary through-the-door handle, black - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 609 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 609 mm shaft Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 2,1 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 2,1 m wire Motor operator, 120 VAC Motor operator, 240 VAC Motor operator, 24 VDC Motor operator, 48 VDC Motor operator, 120 VDC Handle block for temporary use, padlockable in On/Off position Handle block for temporary use, padlockable in Off position Handle block, fi xed mounted on breaker, padlockable in On/Off position Handle block, fi xed mounted on breaker, padlockable in Off position EHMCCB EHMCCBI EHMVD06B EHMVD12B EHMVD24B EHMVD06R EHMVD12R EHMVD24R EHMVD06BX EHMVD12BX EHMVD24BX EHMVD06RX EHMVD12RX EHMVD24RX EHMFS04 EMHFS07I EHMFS04X EHMFS07X EOPEF240C EOPEF240C EOPEF24D EOPEF48D EOPEF240C EFPHB EFPHBOFF EFPHL EFPHLOFF Handle block fi xed mounted Handle block temporary use Discrimination/system design software on CD Contact CHS Controls 23 See page 7 for possible installation combinations. 24 Rotary through-the-door handle, see page 24 for min and max enclosure depth. 25 Flexshaft mechanism, additional hardware may be required depending on enclosure type. Contact CHS Controls for more information. 26 Contact CHS Controls for breaker interlock kits and cylinder locks. 11

12 Moulded Case Circuit Breakers for Plant Protection, JG Frame A, IEC/UL/CSA Breaker Capacity Breaking capacity, ka, VAC Breaker Rated voltage, Ue, VAC IEC , Icu/Ics UL 489/CSA type IEC UL/CSA E /65 25/25 12/ S /85 40/40 12/ H /100 70/70 14/ C / /75 20/ Catalogue Numbers, MCCBs with Thermal-Magnetic Trip Unit see note 17, 27, 28, 29, 30 Rated Adjustable range Catalogue numbers current Thermal Magnetic Complete breakers Trip unit In, A Ir, A Im, A Type E Type S Type H Type C only 3 pole breakers 70 Fixed JGE3070FAG JGS3070FAG JGH3070FAG JGC3070FAG JT3070FA 90 Fixed JGE3090FAG JGS3090FAG JGH3090FAG JGC3090FAG JT3090FA 100 Fixed JGE3100FAG JGS3100FAG JGH3100FAG JGC3100FAG JT3100FA 125 Fixed JGE3125FAG JGS3125FAG JGH3125FAG JGC3125FAG JT3125FA 150 Fixed JGE3150FAG JGS3150FAG JGH3150FAG JGC3150FAG JT3150FA 175 Fixed JGE3175FAG JGS3175FAG JGH3175FAG JGC3175FAG JT3175FA 200 Fixed JGE3200FAG JGS3200FAG JGH3200FAG JGC3200FAG JT3200FA 225 Fixed JGE3225FAG JGS3225FAG JGH3225FAG JGC3225FAG JT3225FA 250 Fixed JGE3250FAG JGS3250FAG JGH3250FAG JGC3250FAG JT3250FA JGE3080AAG JGS3080AAG JGH3080AAG JGC3080AAG JT3080AA JGE3100AAG JGS3100AAG JGH3100AAG JGC3100AAG JT3100AA JGE3125AAG JGS3125AAG JGH3125AAG JGC3125AAG JT3125AA JGE3160AAG JGS3160AAG JGH3160AAG JGC3160AAG JT3160AA JGE3200AAG JGS3200AAG JGH3200AAG JGC3200AAG JT3200AA JGE3250AAG JGS3250AAG JGH3250AAG JGC3250AAG JT3250AA 250 Breaker frame only JGE3250NN JGS3250NN JGH3250NN 250 Moulded case switch JGK3250KSG 4 pole breakers 70 Fixed JGE4070FAG JGS4070FAG JGH4070FAG JGC4070FAG JT4070FA 90 Fixed JGE4090FAG JGS4090FAG JGH4090FAG JGC4090FAG JT4090FA 100 Fixed JGE4100FAG JGS4100FAG JGH4100FAG JGC4100FAG JT4100FA 125 Fixed JGE4125FAG JGS4125FAG JGH4125FAG JGC4125FAG JT4125FA 150 Fixed JGE4150FAG JGS4150FAG JGH4150FAG JGC4150FAG JT4150FA 175 Fixed JGE4175FAG JGS4175FAG JGH4175FAG JGC4175FAG JT4175FA 200 Fixed JGE4200FAG JGS4200FAG JGH4200FAG JGC4200FAG JT4200FA 225 Fixed JGE4225FAG JGS4225FAG JGH4225FAG JGC4225FAG JT4225FA 250 Fixed JGE4250FAG JGS4250FAG JGH4250FAG JGC4250FAG JT4250FA JGE4080AAG JGS4080AAG JGH4080AAG JGC4080AAG JT4080AA JGE4100AAG JGS4100AAG JGH4100AAG JGC4100AAG JT4100AA JGE4125AAG JGS4125AAG JGH4125AAG JGC4125AAG JT4125AA JGE4160AAG JGS4160AAG JGH4160AAG JGC4160AAG JT4160AA JGE4200AAG JGS4200AAG JGH4200AAG JGC4200AAG JT4200AA JGE4250AAG JGS3250AAG JGH4250AAG JGC4250AAG JT4250AA 250 Breaker frame only JGE4250NN JGS4250NN JGH4250NN 250 Moulded case switch JGK7250KSG 12

13 Catalogue Numbers, MCCBs with Digitrip 310 Electronic Trip Unit see note 17, 31, 32, 33 Rated Catalogue numbers current Complete breakers Trip unit External In, A Protection Type E Type S Type H Type C only neutral CT 3 pole breakers 50 LS JGE305033G JGS305033G JGH305033G JGC305033G JT LSI JGE305032G JGS305032G JGH305032G JGC305032G JT LSG JGE305035G JGS305035G JGH305035G JGC305035G JT JGFCT LSIG JGE305036G JGS305036G JGH305036G JGC305036G JT JGFCT LS JGE310033G JGS310033G JGH310033G JGC310033G JT LSI JGE310032G JGS310032G JGH310032G JGC310032G JT LSG JGE310035G JGS310035G JGH310035G JGC310035G JT JGFCT LSIG JGE310036G JGS310036G JGH310036G JGC310036G JT JGFCT LS JGE316033G JGS316033G JGH316033G JGC316033G JT LSI JGE316032G JGS316032G JGH316032G JGC316032G JT LSG JGE316035G JGS316035G JGH316035G JGC316035G JT JGFCT LSIG JGE316036G JGS316036G JGH316036G JGC316036G JT JGFCT LS JGE325033G JGS325033G JGH325033G JGC325033G JT LSI JGE325032G JGS325032G JGH325032G JGC325032G JT LSG JGE325035G JGS325035G JGH325035G JGC325035G JT JGFCT LSIG JGE325036G JGS325036G JGH325036G JGC325036G JT JGFCT250 4 pole breakers 50 LS JGE405033G JGS405033G JGH405033G JGC405033G JT JGFCT LSI JGE405032G JGS405032G JGH405032G JGC405032G JT JGFCT LSG JGE405035G JGS405035G JGH405035G JGC405035G JT JGFCT LSIG JGE405036G JGS405036G JGH405036G JGC405036G JT JGFCT LS JGE410033G JGS410033G JGH410033G JGC410033G JT JGFCT LSI JGE410032G JGS410032G JGH410032G JGC410032G JT JGFCT LSG JGE410035G JGS410035G JGH410035G JGC410035G JT JGFCT LSIG JGE410036G JGS410036G JGH410036G JGC410036G JT JGFCT LS JGE416033G JGS416033G JGH416033G JGC416033G JT JGFCT LSI JGE416032G JGS416032G JGH416032G JGC416032G JT JGFCT LSG JGE416035G JGS416035G JGH416035G JGC416035G JT JGFCT LSIG JGE416036G JGS416036G JGH416036G JGC416036G JT JGFCT LS JGE425033G JGS425033G JGH425033G JGC425033G JT JGFCT LSI JGE425032G JGS425032G JGH425032G JGC425032G JT JGFCT LSG JGE425035G JGS425035G JGH425035G JGC425035G JT JGFCT LSIG JGE425036G JGS425036G JGH425036G JGC425036G JT JGFCT M4 hardware is included. 27 For 2 pole applications, use two outer poles. Contact CHS Controls for 2 pole breakers. 28 MCCBs with adjustable thermal trip are not UL/CSA approved. 29 Terminals are not included in breaker frames, must be ordered separately pole thermal magnetic MCCBs have unprotected neutral. Replace the fourth character by 8 for 0/60% or by 9 for 0/100% protected neutral. Example: JGH4250AAG will be JGH8250AAG. 31 Protection type Ir settings LS Long delay and short delay protection 250 A MCCB 250, 225, 200, 175, 160, 150, 125, 100. LSI Long delay, short delay and instantaneous protection 160 A MCCB 160, 150, 125, 110, 100, 90, 80, 63. LSG Long delay, short delay and earth fault protection 100 A MCCB 100, 90, 80, 70, 63, 50, 45, 40. LSIG Long delay, short delay, instantaneous and earth fault protection 50 A MCCB 50, 45, 40, 32, 30, 25, Neutral CT is required for 4-wire systems with protected neutral and for LSG/LSIG trip units. External installation pole electronic trip units MCCBs have unprotected neutral. Replace the fourth character to 6 for 60% or to 7 for 100% protected neutral. Protected neutral is not adjustable. Example: JGH425033G will be JGH725033G. 13

14 Earth Leakage Modules for JG Frame MCCBs, bottom mounted Eaton s Cutler-Hammer Rated Rated current voltage Pickup Time Alarm contacts In, A Un, VAC Poles Standard setting, A Delay, s Earth fault levels Catalogue numbers reset WARNING test IEC 0,03-10 Inst.-1 50/100% ELJBE3160W IEC 0,03-10 Inst.-1 50/100% ELJBE4160W IEC 0,03-10 Inst.-1 50/100% ELJBE3250W IEC 0,03-10 Inst.-1 50/100% ELJBE4250W UL/CSA 0,03-10 Inst.-1 50/100% ELJBN3150W UL/CSA 0,03-10 Inst.-1 50/100% ELJBN4150W UL/CSA 0,03-10 Inst.-1 50/100% ELJBN3250W UL/CSA 0,03-10 Inst.-1 50/100% ELJBN4250W Terminals, Installation Accessories for JG Frame MCCBs see note 20, 34 T250FJ TA250FJ FJCWTK TC250FJ Description Terminal for Cu cond., pressure type, 250 A, mm 2 /AWG Terminal for Cu/Al cond., pressure type, 250 A, mm 2 /AWG Terminal for Cu/Al cond., pressure type, 250 A, mm 2 /AWG Endcap kit for busbar/cable lugs, 3 pole, metric hardware Endcap kit for busbar/cable lugs, 4 pole, metric hardware Catalogue numbers T250FJ, included TA250FJ TC250FJ FJ3RTWK FJ4RTWK Multiwire terminal Endcap kit Endcap kit for busbar/cable lugs, 3 pole, imperial hardware Endcap kit for busbar/cable lugs, 4 pole, imperial hardware Multiwire connectors for Cu cond., 250 A, 3 wires, 2,1-13 mm 2 /AWG 14-6, kit of 3 Multiwire connectors for Cu cond., 250 A, 6 wires, 2,1-13 mm 2 /AWG 14-6, kit of 3 Control wire terminal kit, only for use with T250FJ terminals, 14 pcs per package FJ3RTDK FJ4RTDK 3TA250J3 3TA250J6 FJCWTK Spreader Interphase barrier Spreader, pole cc=45 mm, 3 pole, hardware not included, use endcap kit Spreader, pole cc=45 mm, 4 pole, hardware not included, use endcap kit Terminal shields, ingress protection IP 30, 3 pole Terminal shields, ingress protection IP 30, 4 pole Interphase barriers, 6 pcs per package Interphase barriers, 8 pcs per package FJTEW3 FJTEW4 FJTS3K FJTS4K FJIPBK FJIPBK4 Terminal shield Plug-in Blocks for JG Frame MCCBs see note 22 Plug-in block for 3 pole breaker, including breaker terminals and trip-on drawout interlock Plug-in block for 4 pole breaker, including breaker terminals and trip-on drawout interlock PAD3J PAD4J 20 Multiwire terminals only to be used on 3 pole MCCBs, terminal cover is included. 22 Plug-in block can be installed either on or partly behind mounting plate. Rear terminal stabs are included. Stabs can be converted to front terminals. 23 See page 7 for possible installation combinations. 24 Rotary through-the-door handle, see page 24 for min and max enclosure depth. 25 Flexshaft mechanism, additional hardware may be required depending on enclosure type. Contact CHS Controls for more information. 26 Contact CHS Controls for breaker interlock kits and cylinder locks. 34 Terminal T250FJ is made of stainless steel. Terminal TA250FJ is made of aluminium. Terminal TC250FJ is made of copper. 14

15 I Eaton s Cutler-Hammer Internal Accessories for JG Frame MCCBs see note 23 Aux/alarm switch Shunt trip Undervoltage release Description Auxiliary contact, 1 change-over contact Auxiliary contact, 2 change-over contacts Alarm contact, 1 change-over contact Alarm contact, 2 change-over contacts Combination auxiliary and alarm contact, 1 change-over contact of each Shunt trip, 120 VAC Shunt trip, 240 VAC Shunt trip, VAC Shunt trip, VDC Undervoltage release, 120 VAC Undervoltage release, VAC, VAC Undervoltage release, VAC Undervoltage release, 24 VAC/VDC Undervoltage release, 48 VAC Undervoltage release, 48 VDC Undervoltage release, 120 VDC Catalogue Number AUX1A1BPK AUX2A2BPK ALM1M1BJPK ALM2M2BJPK AUXALRMJPK SNT120CPK SNT1200PK SNT480APK SNT060CPK UVR120APK UVR480APK UVR600APK UVR024CPK UVR048APK UVR048DPK UVR125DPK External Accessories for JG Frame MCCBs see note 24, 25, 26 OFF/O Trip ON/I Direct rotary handle OFF/O Trip ON/I Rotary through-the-door handle Flexshaft mechanism, fl ange mounted ON OFF O Motor operator ON OFF Direct (close-coupled) rotary handle Direct (close-coupled) rotary handle with door interlock Rotary through-the-door handle, black - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 609 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 609 mm shaft Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 2,1 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 2,1 m wire Motor operator, 120 VAC Motor operator, 240 VAC Motor operator, 24 VDC Motor operator, 48 VDC Motor operator, 120 VDC Handle block for temporary use, padlockable in On/Off position Handle block for temporary use, padlockable in Off position JHMCCB JHMCCBI FJHMVD06B FJHMVD12B FJHMVD24B FJHMVD06R FJHMVD12R FJHMVD24R FJHMVD06BX FJHMVD12BX FJHMVD24BX FJHMVD06RX FJHMVD12RX FJHMVD24RX JHMFS04 JMHFS07 JHMFS04X JHMFS07X EOPFJ240C EOPFJ240C EOPFJ24D EOPFJ48D EOPFJ240C FJPHB FJPHBOFF Handle block fi xed mounted Handle block temporary use Handle block, fi xed mounted on breaker, padlockable in On/Off position Handle block, fi xed mounted on breaker, padlockable in Off position Plug-in test kit for electronic trip units, 120 VAC power supply Plug-in test kit for electronic trip units, 230 VAC power supply Discrimination/system design software on CD FJPHL FJPHLOFF MTST120V MTST230V Contact CHS Controls 15

16 Moulded Case Circuit Breakers for Plant Protection, LG Frame A, IEC/UL/CSA Breaker Capacity Breaking capacity, ka, VAC Breaker Rated voltage, Ue, VAC IEC , Icu/Ics UL 489/CSA type IEC UL/CSA E /65 35/35 12/ S /85 50/50 20/ H /100 70/70 25/ C / /75 35/ Catalogue Numbers, MCCBs with Thermal-Magnetic Trip Unit see note 29, 35, 36 Rated Adjustable range Catalogue numbers current Thermal Magnetic Complete breakers Trip unit In, A Ir, A Im, A Type E Type S Type H Type C only 3 pole breakers 250 Fixed LGE3250FAG LGS3250FAG LGH3250FAG LGC3250FAG LT3250FA 300 Fixed LGE3300FAG LGS3300FAG LGH3300FAG LGC3300FAG LT3300FA 350 Fixed LGE3350FAG LGS3350FAG LGH3350FAG LGC3350FAG LT3350FA 400 Fixed LGE3400FAG LGS3400FAG LGH3400FAG LGC3400FAG LT3400FA 500 Fixed LGE3500FAG LGS3500FAG LGH3500FAG LGC3500FAG LT3500FA 600 Fixed LGE3600FAG LGS3600FAG LGH3600FAG LGC3600FAG LT3600FA LGE3250AAG LGS3250AAG LGH3250AAG LGC3250AAG LT3250AA LGE3320AAG LGS3320AAG LGH3320AAG LGC3320AAG LT3320AA LGE3400AAG LGS3400AAF LGH3400AAG LGC3400AAG LT3400AA LGE3500AAF LGS3500AAG LGH3500AAG LGC3500AAG LT3500AA LGE3630AAG LGS3630AAG LGH3630AAG LGC3630AAG LT3630AA 630 Breaker frame only LGE3630NN LGS3630NN LGH3630NN LGC3630NN 400 Moulded case switch LGK3400KSG 630 Moulded case switch LGK3630KSG 4 pole breakers 250 Fixed LGE4250FAG LGS4250FAG LGH4250FAG LGC4250FAG LT4250FA 300 Fixed LGE4300FAG LGS4300FAG LGH4300FAG LGC4300FAG LT4300FA 350 Fixed LGE4350FAG LGS4350FAG LGH4350FAG LGC4350FAG LT4350FA 400 Fixed LGE4400FAG LGS4400FAG LGH4400FAG LGC4400FAG LT4400FA 500 Fixed LGE4500FAG LGS4500FAG LGH4500FAG LGC4500FAG LT4500FA 600 Fixed LGE4600FAG LGS4600FAG LGH4600FAG LGC4600FAG LT4600FA LGE4250AAG LGS4250AAG LGH4250AAG LGC4250AAG LT4250AA LGE4320AAG LGS4320AAG LGH4320AAG LGC4320AAG LT4320AA LGE4400AAG LGS4400AAG LGH4400AAG LGC4400AAG LT4400AA LGE4500AAG LGS4500AAG LGH4500AAG LGC4500AAG LT4500AA LGE4630AAG LGS4630AAG LGH4630AAG LGC4630AAG LT4630AA 630 Breaker frame only LGE4630NN LGS4630NN LGH4630NN LGC4630NN 400 Moulded case switch LGK4400KSG 630 Moulded case switch LGK4630KSG 16

17 Catalogue Numbers, MCCBs with Digitrip 310 Electronic Trip Unit see note 35, 36, 38, 39 Rated Catalogue numbers current Complete breakers Trip unit External In, A Protection Type E Type S Type H Type C only neutral CT 3 pole breakers 250 LS LGE325033G LGS325033G LGH325033G LGC325033G LT LSI LGE325032G LGS325032G LGH325032G LGC325032G LT LSG LGE325035G LGS325035G LGH325035G LGC325035G LT LGFCT LSIG LGE325036G LGS325036G LGH325036G LGC325036G LT LGFCT LS LGE340033G LGS340033G LGH340033G LGC340033G LT LSI LGE340032G LGS340032G LGH340032G LGC340032G LT LSG LGE340035G LGS340035G LGH340035G LGC340035G LT LGFCT LSIG LGE340036G LGS340036G LGH340036G LGC340036G LT LGFCT LS LGE360033G LGS360033G LGH360033G LGC360033G LT LSI LGE360032G LGS360032G LGH360032G LGC360032G LT LSG LGE360035G LGS360035G LGH360035G LGC360035G LT LGFCT LSIG LGE360036G LGS360036G LGH360036G LGC360036G LT LGFCT LS LGE363033G LGS363033G LGH363033G LGC363033G LT LSI LGE363032G LGS363032G LGH363032G LGC363032G LT LSG LGE363035G LGS363035G LGH363035G LGC363035G LT LGFCT LSIG LGE363036G LGS363036G LGH363036G LGC363036G LT LGFCT630 4 pole breakers 250 LS LGE425033G LGS425033G LGH425033G LGC425033G LT LGFCT LSI LGE425032G LGS425032G LGH425032G LGC425032G LT LGFCT LSG LGE425035G LGS425035G LGH425035G LGC425035G LT LGFCT LSIG LGE425036G LGS425036G LGH425036G LGC425036G LT LGFCT LS LGE440033G LGS440033G LGH440033G LGC440033G LT LGFCT LSI LGE440032G LGS440032G LGH440032G LGC440032G LT LGFCT LSG LGE440035G LGS440035G LGH440035G LGC440035G LT LGFCT LSIG LGE440036G LGS440036G LGH440036G LGC440036G LT LGFCT LS LGE460033G LGS460033G LGH460033G LGC460033G LT LGFCT LSI LGE460032G LGS460032G LGH460032G LGC460032G LT LGFCT LSG LGE460035G LGS460035G LGH460035G LGC460035G LT LGFCT LSIG LGE460036G LGS460036G LGH460036G LGC460036G LT LGFCT LS LGE463033G LGS463033G LGH463033G LGC463033G LT LGFCT LSI LGE463032G LGS463032G LGH463032G LGC463032G LT LGFCT LSG LGE463035G LGS463035G LGH463035G LGC463035G LT LGFCT LSIG LGE463036G LGS463036G LGH463036G LGC463036G LT LGFCT Terminals are not included in breaker frames, must be ordered separately. 32 Neutral CT is required for 4-wire systems with protected neutral and for LSG/LSIG trip units. External installation. 35 M5 hardware is included A MCCBs as well as MCCBs with adjustable thermal trip are not UL/CSA approved pole thermal magnetic MCCBs have unprotected neutral. Replace the fourth character by 7 for 100%, by 8 for 0-60% or by 9 for 0-100% protected neutral. Example: LGH4630AAG will be LGH7630AAG. 38 Protection type Ir settings LS Long delay and short delay protection 630 A MCCB 630, 600, 500, 400, 350, 315, 300, 250. LSI Long delay, short delay and instantaneous protection 600 A MCCB 600, 500, 450, 400, 350, 315, 300, 250. LSG Long delay, short delay and earth fault protection 400 A MCCB 400, 350, 315, 300, 300, 250, 225, 200, 160. LSIG Long delay, short delay, instantaneous and earth fault protection 250 A MCCB 250,225, 200, 175, 160, 150, 125, pole electronic trip units MCCBs have unprotected neutral. Replace the fourth character by 6 for 60% or by 7 for 100% protected neutral. Protected neutral is not adjustable. Example: LGH463033G will be LGH763033G. 17

18 Earth Leakage Modules for LG Frame MCCBs, bottom mounted Eaton s Cutler-Hammer Rated Rated current voltage Pickup Time Alarm contacts In, A Un, VAC Poles Standard setting, A Delay, s Earth fault levels Catalogue numbers reset WARNING test IEC 0,03-10 Inst.-1 50/100% ELLBE3400W IEC 0,03-10 Inst.-1 50/100% ELLBE4400W IEC 0,03-10 Inst.-1 50/100% ELLBE3630W IEC 0,03-10 Inst.-1 50/100% ELLBE4630W UL/CSA 0,03-10 Inst.-1 50/100% ELLBN3400W UL/CSA 0,03-10 Inst.-1 50/100% ELLBN4400W UL/CSA 0,03-10 Inst.-1 50/100% ELLBN3600W UL/CSA 0,03-10 Inst.-1 50/100% ELLBN4600W Terminals, Installation Accessories for LG Frame MCCBs see note 40, 41 TA632LK TA631LK TA350LK T632LK T631LK T350LK Endcap kit Description Terminal for Cu/Al cond., pressure type, 400 A, mm 2 /AWG Terminal for Cu cond., pressure type, 400 A, mm 2 /AWG Terminals for Cu/Al cond., pressure type, 400 A, mm 2 /kcmil , kit of 3 Terminals for Cu cond., pressure type, 400 A, mm 2 /kcmil , kit of 3 Terminals for Cu/Al cond., pressure type, 400 A, mm 2 /kcmil , kit of 4 Terminals for Cu cond., pressure type, 400 A, mm 2 /kcmil , kit of 4 Terminals for Cu/Al cond., pressure type, 630 A, 2* mm 2 /AWG 2*2-500, kit of 3 Terminals for Cu cond., pressure type, 630 A, 2* mm 2 /AWG 2*2-500, kit of 3 Terminals for Cu/Al cond., pressure type, 630 A, 2* mm 2 /AWG 2*2-500, kit of 4 Terminals for Cu cond., pressure type, 630 A, 2* mm 2 /AWG 2*2-500, kit of 4 Catalogue numbers TA350LK, included T350LK 3TA631LK 3T631LK 4TA631LK 4T631LK 3TA632LK, included 3T632LK 4TA632LK, included 4T632LK Spreader Interphase barrier Endcap kit for busbar/cable lugs, 3 pole, metric hardware Endcap kit for busbar/cable lugs, 4 pole, metric hardware Endcap kit for busbar/cable lugs, 3 pole, imperial hardware Endcap kit for busbar/cable lugs, 4 pole, imperial hardware Spreader, pole cc=54 mm, 3 pole, hardware not included, use endcap kit L3RTWK L4RTWK L3RTDK L4RTDK LGTEW3 Spreader, pole cc=54 mm, 4 pole, hardware not included, use endcap kit Terminal shields, ingress protection IP 30, 3 pole Terminal shields, ingress protection IP 30, 4 pole Interphase barriers, 2 pcs per package LGTEW4 LTS3K LTS4K IPB3 Terminal shield Plug-in Blocks for LG Frame MCCBs see note 22 Plug-in block for 3 pole breaker, including breaker terminals and trip-on drawout interlock Plug-in block for 4 pole breaker, including breaker terminals and trip-on drawout interlock PAD3L PAD4L 22 Plug-in block can be installed either on or partly behind mounting plate. Rear terminal stabs are included. Stabs can be converted to front terminals. 23 See page 7 for possible installation combinations. 24 Rotary through-the-door handle, see page 24 for min and max enclosure depth. 25 Flexshaft mechanism, additional hardware may be required depending on enclosure type. Contact CHS Controls for more information. 26 Contact CHS Controls for breaker interlock kits and cylinder locks. 40 Terminal cover is included for terminals 3TA631LK, 3T631LK, 4TA631LK, 4T631LK, 3TA632LK, 3T632LK, 4TA632LK and 4T632LK. 41 Terminals TA350LK, 3TA631LK, 4TA631LK, 3TA632LK and 4TA632LK are made of aluminium. Terminals T350LK, 3T631LK, 4T631LK, 3T632LK and 4T632LK are made of copper. 18

19 I Eaton s Cutler-Hammer Internal Accessories for LG Frame MCCBs see note 23 Aux/alarm switch Shunt trip Undervoltage release Description Auxiliary contact, 1 change-over contact Auxiliary contact, 2 change-over contacts Alarm contact, 1 change-over contact Alarm contact, 2 change-over contacts Combination auxiliary and alarm contact, 1 change-over contact of each Shunt trip, 120 VAC Shunt trip, 240 VAC Shunt trip, VAC Shunt trip, VDC Undervoltage release, 120 VAC Undervoltage release, VAC, VAC Undervoltage release, VAC Undervoltage release, 24 VAC/VDC Undervoltage release, 48 VAC Undervoltage release, 48 VDC Undervoltage release, 120 VDC Catalogue Number AUX1A1BPK AUX2A2BPK ALM1M1BJPK ALM2M2BJPK AUXALRMJPK SNT120CPK SNT1200PK SNT480APK SNT060CPK UVR120APK UVR480APK UVR600APK UVR024CPK UVR048APK UVR048DPK UVR125DPK External Accessories for LG Frame MCCBs see note 24, 25, 26 OFF/O Trip ON/I Direct rotary handle OFF/O Trip ON/I Rotary through-the-door handle Flexshaft mechanism, fl ange mounted ON OFF O Motor operator ON OFF Direct (close-coupled) rotary handle Direct (close-coupled) rotary handle with door interlock Rotary through-the-door handle, black - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, black - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 152 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 304 mm shaft Rotary through-the-door handle, red - IP 54/NEMA 12, 609 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, black - IP 65/NEMA 4X, 609 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 152 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 304 mm shaft Rotary through-the-door handle, red - IP 65/NEMA 4X, 609 mm shaft Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 54/NEMA 12, 2,1 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 1,2 m wire Flexshaft mechanism, fl ange mounted handle - IP 65/NEMA 4X, 2,1 m wire Motor operator, 120 VAC Motor operator, 240 VAC Motor operator, 24 VDC Motor operator, 48 VDC Motor operator, 120 VDC Handle block for temporary use, padlockable in On/Off position Handle block for temporary use, padlockable in Off position LHMCCB LHMCCBI KLHMVD06B KLHMVD12B KLHMVD24B KLHMVD06R KLHMVD12R KLHMVD24R KLHMVD06BX KLHMVD12BX KLHMVD24BX KLHMVD06RX KLHMVD12RX KLHMVD24RX LHMFS04 LMHFS07 LMHFS04X LMHFS07X EOPLG240C EOPLG240C EOPLG24D EOPLG48D EOPLG240C LBHP LBHPOFF Handle block fi xed mounted Handle block temporary use Handle block, fi xed mounted on breaker, padlockable in On/Off position Handle block, fi xed mounted on breaker, padlockable in Off position Plug-in test kit for electronic trip units, 120 VAC power supply Plug-in test kit for electronic trip units, 230 VAC power supply Discrimination/system design software on CD LPHL LPHLOFF MTST120V MTST230V Contact CHS Controls 19

20 Moulded Case Circuit Breakers for Motor Starters EG - LG Frame A, IEC/UL/CSA Combination Ratings see note 42 Combination ratings with Eaton s Cutler-Hammer starters, ka, VAC Breaker Rated voltage, Ue, VAC IEC UL 489/CSA frame IEC UL/CSA EG Y/ /65 100/ JG LG Catalogue Numbers, 3 Pole MCCBs with Magnetic Trip Unit for Starter Combinations see note 43, 44, 45, 46 Rated Adjustable settings Catalogue numbers current Magnetic Complete circuit breakers In, A Im, A EG Frame JG Frame LG Frame 3 9, 15, 21, 27, 30, 33 HMCPE003A0C 7 21, 35, 49, 63, 70, 77 HMCPE007C0C 15 45, 75, 105, 135, 150, 165 HMCPE015E0C 30 90, 150, 210, 270, 300, 330 HMCPE030H1C , 250, 350, 450, 500,550 HMCPE050K2C , 350,490, 630, 700, 770 HMCPE070M2C , 500, 700, 900, 1000, 1100 HMCPE100R3C , 750, 1000, 1250, 1375, 1500 HMCPE100T3C HMCPJ250D5L HMCPJ250F5L HMCPJ250G5L HMCPJ250J5L HMCPJ250K5L HMCPJ250L5L HMCPJ250W5L HMCPL600L HMCPL600N HMCPL600R HMCPL600X HMCPL600Y HMCPL600P HMCPL600M 42 Combination ratings per IEC , Type 2 coordination, are based on combination use with Eaton s Cutler-Hammer IT Starters. The UL/CSA approval is based on combination use with Eaton s Cutler-Hammer IT and Freedom Series starters. Contact CHS Controls for coordination information. 43 The MCCBs can be used for DC applications, max 250 VDC. 44 Trip levels for DC applications, actual trip level is approximately 40% higher than values shown. 45 Contact CHS Controls for MCCBs for thermal magnetic motor protection MCCBs according to IEC For accessories see page 10 for EG frame, 14 for JG frame and page 18 for LG frame. 20

Series G Moulded Case. Circuit Breakers. Series G Moulded Case Circuit Breakers 1

Series G Moulded Case. Circuit Breakers. Series G Moulded Case Circuit Breakers 1 1 Series G Moulded Case Circuit Breakers Description Series G Globally Accepted Breaker General Information........................................... 2 Product Line Overview.........................................

More information

Product Line Overview. The Most Logically Designed Contact Assembly

Product Line Overview. The Most Logically Designed Contact Assembly 15 0 Amperes for UL, CSA & IEC Applications Product Line Overview -3 General Information Cutler-Hammer Series G Molded Case Circuit Breakers provide increased performance in considerably less space than

More information

Supplementary Protectors. Circuit Breakers & Circuit Breakers & Supplementary Protectors Contents

Supplementary Protectors. Circuit Breakers & Circuit Breakers & Supplementary Protectors Contents -1 May 008 Circuit Breakers & Supplementary Protectors Contents Description Page Series C vs. Series G Typical Applications........................................... - Series G Globally Accepted Breaker

More information

30 ma Ground Fault (Earth Leakage) Modules. Product Description

30 ma Ground Fault (Earth Leakage) Modules. Product Description August 2006 0 ma Ground Fault (Earth Leakage) Modules 5-0 ma Ground Fault (Earth Leakage) Modules Clockwise from Left:,, MCCBs Shown with Ground Fault (Earth Leakage) Modules Product Description Eaton

More information

Product Line Overview. The Most Logically Designed Contact Assembly

Product Line Overview. The Most Logically Designed Contact Assembly Circuit Breakers & Supplementary Protectors 15 00 Amperes for UL, CSA & IEC Applications Product Line Overview -3 General Information Cutler-Hammer Series G Molded Case Circuit Breakers provide increased

More information

Technical Data and Specifications. Table UL 489/IEC Interrupting Capacity Ratings. cu I cs I cu I cs I cu I cs I cu I cs I cu I cs

Technical Data and Specifications. Table UL 489/IEC Interrupting Capacity Ratings. cu I cs I cu I cs I cu I cs I cu I cs I cu I cs -14 1 Amperes November 08 Eaton s Cutler-Hammer EG Product Description EG breaker is HACR rated. Technical Data and Specifications Table -6. UL 489/IEC 947-2 Interrupting Capacity Ratings Circuit Interrupting

More information

Series G Moulded Case Circuit Breakers A for IEC & NEMA Applications

Series G Moulded Case Circuit Breakers A for IEC & NEMA Applications 15 0 A for IEC & NEMA Applications Product Focus World-class accessories include: Q Circuit breaker W Thermal-magnetic trip unit, integrated on E Frame E Magnetic only trip unit, integrated on E Frame

More information

Molded Case Circuit Breakers

Molded Case Circuit Breakers Molded Case Circuit Breakers Series G Circuit Breakers.1 Introduction Product Overview......................................... V4-T- Typical Applications........................................ V4-T-

More information

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI . Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,

More information

Molded Case Circuit Breakers

Molded Case Circuit Breakers Series G Circuit Breakers.1 Introduction Product Overview........................................ V4-T- Typical Applications....................................... V4-T- Series G in Eaton Assemblies...............................

More information

Molded Case Circuit Breakers

Molded Case Circuit Breakers Series G Circuit Breakers.1 Introduction Product Overview........................................ V4-T- Typical Applications....................................... V4-T- Series G in Eaton Assemblies...............................

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

MCCB Panelboard Distribution System Product Focus 2004 Catalogue

MCCB Panelboard Distribution System Product Focus 2004 Catalogue MCCB Panelboard Distribution System Product Focus 2004 Catalogue Features and Benefits 250A, 400A, 630A & 800A panelboard versions available. 3 to 18 outgoing ways. Outgoing MCCBs up to 400A. KEMA certified.

More information

2.2. Molded Case Circuit Breakers. Contents. NG-Frame ( Amperes) Series G

2.2. Molded Case Circuit Breakers. Contents. NG-Frame ( Amperes) Series G . NG-Frame (00 ) NG-Frame (30 00 s) Product All Eaton NG-Frame circuit breakers are suitable for reverse feed use All NG-Frame circuit breakers are HACR rated Contents Page EG-Frame (5 5 s)..................

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................

More information

DPX moulded case circuit breakers

DPX moulded case circuit breakers BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.

More information

DPX 1600 Electronic release

DPX 1600 Electronic release 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 1600 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND

More information

PVGard 600 and 1000 Vdc solar photovoltaic circuit breakers

PVGard 600 and 1000 Vdc solar photovoltaic circuit breakers Supersedes October 2013 photovoltaic circuit breakers Contents Description Page Product description........................ 1 PVGard 600 Vdc........................... 2 Technical data...........................

More information

DPX 630 Electronic release

DPX 630 Electronic release 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND MECHANICAL CHARACTERISTICS

More information

DPX earth leakage DPX 3 -I earth leakage

DPX earth leakage DPX 3 -I earth leakage 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 + earth leakage Reference(s) : 420 225/ 227/ 228/229/ 255/ 257/ 258/ 259/ 285/ 287/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3.

More information

DPX Thermal magnetic and trip-free switches DPX 3 -I 250

DPX Thermal magnetic and trip-free switches DPX 3 -I 250 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 Reference(s) : 420 205/ 207/ 208/209/ 215/ 217/ 218/ 219/ 235/ 237/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3.

More information

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar

More information

Table Line and Load Terminals. Terminal Body Material. Wire Type. Aluminum Copper Aluminum. English English English.

Table Line and Load Terminals. Terminal Body Material. Wire Type. Aluminum Copper Aluminum. English English English. -174 Series C Molded Case Circuit s July 7 Molded Case Switches Refer to Eaton for UL listed, series tested Molded Case Switch application data. Table -278. Molded Case Switches Cont. Amp Rating at 40

More information

Table Types LD, HLD and LDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units

Table Types LD, HLD and LDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units -1 1 Amperes July 07 Product Selection Table -191. s, H and C Thermal-Magnetic Circuit s with Interchangeable Trip Units Maximum Continuous Ampere at 40 C 2-Pole 0 0 3-Pole 0 0 4-Pole 0 0 Magnetic trip

More information

DPX 630 Thermal magnetic and trip-free switches DPX-I 630

DPX 630 Thermal magnetic and trip-free switches DPX-I 630 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND MECHANICAL CHARACTERISTICS

More information

DPX Thermal magnetic and trip-free switches DPX 3 -I 160

DPX Thermal magnetic and trip-free switches DPX 3 -I 160 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY

More information

DPX Magnetic only

DPX Magnetic only 87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 5. CONFORMITY

More information

LV Power Distribution Table of Contents

LV Power Distribution Table of Contents Table of Contents Residential Products Circuit Protection.................-2 Plastic Loadcentres...............-4 Metal Loadcentres and Boards......-5 Miniature Circuit Breakers Quicklag and ELQ.................-8

More information

DPX Thermal magnetic and trip-free switches DPX 3 -I 630

DPX Thermal magnetic and trip-free switches DPX 3 -I 630 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 2 6. CONFORMITY

More information

cor Long Run Experience

cor Long Run Experience Moulded Case Circuit Breakers Moulded Case Circuit Breakers 16-1250A cor Long Run Experience cor Breaking capacity (according to IEC 947-2 at 415V) Icu 100 D160L D250L D400L D630L 70 60 DH800 50 35 30

More information

DPX Electronic + earth leakage

DPX Electronic + earth leakage 87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 DPX 3 250 Electronic + earth leakage CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. ELECTRICAL AND MECHANICAL

More information

Technical data for manual motor starters Type MS325

Technical data for manual motor starters Type MS325 for manual mor starters Type MS325 General data Rated voltage 600 V Rated current 25 A (14 setting ranges, 0.1 25A) Rated frequency 50-60 Hz Electrical and mechanical life endurance 100,000 operations

More information

DPX 160 Thermal magnetic and trip-free switches DPX-I 160

DPX 160 Thermal magnetic and trip-free switches DPX-I 160 87045 LIMOGES Cedex Phone : +33 05 55 06 87 87 FAX : +33 05 55 06 88 88 DPX 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND

More information

Low voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.

Low voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application. Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80

More information

Safety, Reliability and Performance verified with the KEMA KEUR mark. Series G Moulded Case Circuit Breakers

Safety, Reliability and Performance verified with the KEMA KEUR mark. Series G Moulded Case Circuit Breakers Series G Moulded Case Circuit Breakers Product Focus Up to 690 Vac 18kA to 100kA Icu 16-2500 Amperes IEC 60947-2 Safety, Reliability and Performance verified with the KEMA KEUR mark Safety, Reliability

More information

Specification for 70mm pole pitch Air circuit breaker up to 1600 A

Specification for 70mm pole pitch Air circuit breaker up to 1600 A Specification for 70mm pole pitch Air circuit breaker up to 1600 A Protective device for low voltage electrical installation Last update :2011-07-08-1 - Table of contents: 1 General...3 2 Compliance with

More information

Manual Motor Starters. Meta-MEC

Manual Motor Starters. Meta-MEC Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) RG H ZG E C

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) RG H ZG E C Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Selection This information is presented only as an aid to understanding catalog numbers.

More information

L-Frame LD F. Circuit Breaker/ Frame Ampere Rating. Trip Unit Rating/ Plug Ampere Rating LD T5 7 W

L-Frame LD F. Circuit Breaker/ Frame Ampere Rating. Trip Unit Rating/ Plug Ampere Rating LD T5 7 W July 07 5 Amperes -111 Product Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.

More information

Overview of Low voltage equipment - Moulded-case & Air circuit-breakers

Overview of Low voltage equipment - Moulded-case & Air circuit-breakers Overview of Low voltage equipment - Moulded-case & Air circuit-breakers Moulded-case circuit-breakers for distribution (1) R16 and R20 Icu = 16 ka @ 220/230 V (2) All the versions with Icu = 35 ka are

More information

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when

More information

Selection Guide Motor Control Device Solutions

Selection Guide Motor Control Device Solutions Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements

More information

DMX 3 -I 2500 switch disconnectors

DMX 3 -I 2500 switch disconnectors 8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40

More information

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters

More information

3 - Protection components Motor circuit-breakers

3 - Protection components Motor circuit-breakers Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

DPX Electronic. Fiche technique : F01362EN/02 Mise à jour le : 15/12/2011 Créé le : 15/06/2011

DPX Electronic. Fiche technique : F01362EN/02 Mise à jour le : 15/12/2011 Créé le : 15/06/2011 87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 DPX 3 250 Electronic Reference(s): 420 302/305/307/309/312/315/317/319/332/335/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3.

More information

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator

More information

Moulded case circuit breakers

Moulded case circuit breakers Moulded case circuit breakers CONTENT Range 4 Protection Releases 5 Salient Features 8 Accessories, 4 Technical data 2 Time Current Characteristics 5 Overall Dimensions 7 SN4 SN3 SN2 SN 3 RANGE Moulded

More information

The breakers offer thermal-magnetic trip protection according to Z and K characteristics.

The breakers offer thermal-magnetic trip protection according to Z and K characteristics. Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific

More information

Protection Equipment

Protection Equipment Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection

More information

DRX 250 B/N/H Circuit breaker (not adjustable)

DRX 250 B/N/H Circuit breaker (not adjustable) 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 References rences: /18/19/20/21/22/23/24/25/26/27/28/29/ 32/33 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. MOUNTING 2 5.

More information

6300A 15 Optibreak B1 & B2 Optibreak B1 & B2 50/60 Hz Ue Icu [v] [ka] 415 65 690 40 4h 4i 1. Open / close Indication 2. Charge and Discharge Indicator 3. Release the reset button 4. Laser Nameplate

More information

DRX 125 Circuit breaker (not adjustable)

DRX 125 Circuit breaker (not adjustable) 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 272 20/21/22/23/24/25/26/27/55/56/57/58/59/60 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (continuation) 2 4.

More information

Vistop TM isolating switches 63 to 160A

Vistop TM isolating switches 63 to 160A DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary

More information

2.3. Molded Case Circuit Breakers. Contents. Internal Accessories. Series C. Product Overview. Description

2.3. Molded Case Circuit Breakers. Contents. Internal Accessories. Series C. Product Overview. Description Molded Case Circuit s Series C.3 Series C Internal Accessories Contents Description Product Overview.......................... Standards and Certifications.................. Quick Reference...........................

More information

Control Circuit Protection

Control Circuit Protection Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC

More information

APPENDIX E. Electrical System Single Line Diagram Overcurrent Protection Study Overcurrent Protection Device Specifications

APPENDIX E. Electrical System Single Line Diagram Overcurrent Protection Study Overcurrent Protection Device Specifications Student Resource Building University of California Santa Barbara Clement Fung Lighting Electrical Option APPENDIX E Electrical System Single Line Diagram Overcurrent Protection Study Overcurrent Protection

More information

PRICING. Multi 9, Compact, Masterpact, Interpact, and Vigirex Circuit Protection Products. Class 600. October 2004

PRICING. Multi 9, Compact, Masterpact, Interpact, and Vigirex Circuit Protection Products. Class 600. October 2004 PRICING October 2004 Multi 9, Compact, Masterpact, Interpact, and Vigirex Circuit Protection Products Class 600 CONTENTS Description Page Multi 9 Supplementary Protectors and Miniature Circuit Breakers.............3

More information

DRX 100 B/N/H Circuit breaker (not adjustable)

DRX 100 B/N/H Circuit breaker (not adjustable) 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (continuation) 2 4. MOUNTING 2 5. CABLING 3 6. ELECTRIC AND MECHANICAL

More information

Thermal magnetic and trip-free switches

Thermal magnetic and trip-free switches 87045 LIMOGES Cedex Phone : 33 05 55 06 87 87 Fax : 33 05 55 06 88 88 DPX 3 1600 Reference(s : 422 250 /251/ 252/ 253/ 254/ 255 /256/ 262/263/ 264/ 265/ 266/ 267/268/ 269/ 270/ 271/ 272/ 273/ 278/ 287/

More information

Molded Case. Circuit Breakers. Molded Case Circuit Breakers Contents

Molded Case. Circuit Breakers. Molded Case Circuit Breakers Contents January 2001 Vol. 1, Ref. No. [0467] -1 Molded Case Circuit Breakers Contents Description Page Product Line Overview........................................... -2 Product Line Description.......................................

More information

Tmax Molded Case Circuit Breakers

Tmax Molded Case Circuit Breakers Tmax Molded Case Circuit s Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product technology. Never before has the industry seen such high

More information

Low voltage moulded case circuit breaker EB2

Low voltage moulded case circuit breaker EB2 Low voltage moulded case circuit breaker EB2 Product series description unit condition Model-type Number of poles Nominal current ratings Electrical characteristics Rated operational voltage Rated insulation

More information

BULLETIN 140U. Molded Case Circuit Breakers SELECTION GUIDE

BULLETIN 140U. Molded Case Circuit Breakers SELECTION GUIDE BULLETIN 140U SELECTION GUIDE Product Overview Bulletin 140U 15 1200 A Thermal-Magnetic 15 800 A Electronic 70 1200 A LS Long Time/Short Time LSI Long Time/Short Time/High Instantaneous LSG Long Time/Short

More information

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24

More information

Comprehensive circuit protection for control panel applications

Comprehensive circuit protection for control panel applications Industrial control circuit breakers Molded-case circuit breakers Miniature circuit breakers Supplementary protectors Hydraulic-magnetic circuit breakers Comprehensive circuit protection for control panel

More information

Product index. 4 - Manual motor protectors. Phone: Fax: Web: -

Product index. 4 - Manual motor protectors. Phone: Fax: Web:  - Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

New DMX 3. Efficient protection up to A AIR CIRCUIT BREAKERS PRODUCT GUIDE

New DMX 3. Efficient protection up to A AIR CIRCUIT BREAKERS PRODUCT GUIDE New DMX 3 Efficient protection up to 4 000 A AIR CIRCUIT BREAKERS PRODUCT GUIDE NEW DMX 3 ACBs UP TO 4 000 A EFFICIENT PROTECTION AND CONTROL FOR ALL TYPE OF BUILDINGS 02 Electrical panel equipped with

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

VL Circuit Breaker Features & Benefits. powerful ideas RELIABLE SOLUTIONS

VL Circuit Breaker Features & Benefits. powerful ideas RELIABLE SOLUTIONS VL Circuit Breaker Features & Benefits powerful ideas RELIABLE SOLUTIONS A Solutions Oriented Circuit Protection Family The Tangram An ancient Chinese game in which a few simple components provide endless

More information

Introduction. Standard Features. GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Introduction

Introduction. Standard Features. GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Introduction Introduction Introduction Schneider Electric offers a complete line of products for the manual control and protection of motors. This catalog covers those devices designed to meet IEC standards for protection

More information

Wall mounted switchgear

Wall mounted switchgear Contents Safepact 2... pages /2 to / Enclosed MCCBs 6 to 60A... page /2 Enclosed switch disconnectors 100 to 60A... page / Earth leakage.... page /4 Auxiliaries and accessories... page /5 Enclosed Interpact...page

More information

Magnum IEC Low Voltage Air Circuit Breakers

Magnum IEC Low Voltage Air Circuit Breakers Magnum IEC Low Voltage Air Circuit Breakers Product Focus Up to 690 Vac 42 ka to 100 ka Icu 800 to 6300 Amperes EN 60947-2 A Global Source for Innovative Electrical Power Distribution Solutions Proven

More information

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4. Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

DX³ RCCBs - ID 4P up to 100 A

DX³ RCCBs - ID 4P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified

More information

Low Voltage. EasyPact CVS. Moulded-case circuit breakers from 16 to 100 A

Low Voltage. EasyPact CVS. Moulded-case circuit breakers from 16 to 100 A Low Voltage EasyPact CVS Moulded-case circuit breakers from 16 to 100 A Catalogue 2013 EasyPact CVS Contents Functions and characteristics A-1 Installation recommendations B-1 Dimensions and connection

More information

Approvals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking

Approvals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches

More information

01 Spectra Plus - Introduction

01 Spectra Plus - Introduction 01 Spectra Plus - Introduction Standard features Conforming to IS13947-2/EN60947 2 Compact dimensions Available in 3P & 4P High performance microprocessor protection release Wide overload setting from

More information

Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches Ex9 Series - M

Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches Ex9 Series - M Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches Ex9 Series - M MS50T3L M2N200T3L na.noark-electric.com NOARK Ex9 Series - M Features Molded Case Circuit

More information

PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ)

PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ) PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ) Catalog Class 734 0734CT0201R1/07 07 CONTENTS Description..............................................Page Description.............................................

More information

ACW. Molded-Case Circuit Breaker UL 489 Listed. ACW Catalog Number Sequence

ACW. Molded-Case Circuit Breaker UL 489 Listed. ACW Catalog Number Sequence rotection rotectors Contactors Overloads Relays ushbuttons Molded-Case Breaker UL 489 Listed The EG Series of Molded Case Breakers are designed to provide overload and short-circuit protection for industrial

More information

Cutler-Hammer. Installation Instructions for the Digitrip OPTIM Pole Trip Unit Installation and Operation with L-Frame Series C Circuit Breakers

Cutler-Hammer. Installation Instructions for the Digitrip OPTIM Pole Trip Unit Installation and Operation with L-Frame Series C Circuit Breakers Cutler-Hammer Installation Instructions for the Digitrip OPTIM 550 3-Pole Trip Unit Installation and Operation with L-Frame Series C Circuit Breakers Table of Contents Description Page 1.0 General Information......................1

More information

TX³ RCCBs 2P up to 100 A

TX³ RCCBs 2P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

TYPES DS II AND DSL II METAL ENCLOSED LOW VOLTAGE POWER CIRCUIT BREAKERS

TYPES DS II AND DSL II METAL ENCLOSED LOW VOLTAGE POWER CIRCUIT BREAKERS om.c ww w.e lec tri ca lp ar tm an ua ls TYPES DS II AND DSL II METAL ENCLOSED LOW VOLTAGE POWER CIRCUIT BREAKERS Proven Technology with the Enhancements and Additional Ratings Our Customers Asked For

More information

3. Coils shall be of molded construction

3. Coils shall be of molded construction .7-4 Motor Starters & Contactors Low Voltage Enclosures General Non-Combination Starters January 00 Sheet 8 0 7 8 9 4 Non-Combination Starters Maximum hp, Volts Typical Non-Combination Starter Application

More information

SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A

SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certifi ed for

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1

Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1 MainswitchSurfacemounting Partno. T0-2-8900/I1/SVB Articleno. 207151 CatalogNo. CT02-8900-I1CRQ Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual

More information

Breaking and protection devices

Breaking and protection devices Power guide: A complete set of technical documentation Breaking and protection devices 01 Sustainable development 08 Protection against external disturbances 02 Power balance and choice of power supply

More information

Miniature Circuit Breakers

Miniature Circuit Breakers S00 Series Miniature S00 Series Miniature Circuit Breakers Description The S00 Series miniature circuit breaker offers a compact solution for protection requirements. The S00 devices are UL tested limiting

More information

www. ElectricalPartManuals. com Miniature Circuit Breakers Section 7

www. ElectricalPartManuals. com Miniature Circuit Breakers Section 7 EP60 Series...7-2 EP100 Series...7-4 EP100 ULH Series...7-6 EP100 UC Series (Branch Circuit Protection)...7-8 Series CA Auxiliary Switch and Bell Alarm...7-10 Series CB Auxiliary Switch and Bell Alarm...7-11

More information

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up

More information

C60H-DC C curve. Catalogue numbers

C60H-DC C curve. Catalogue numbers distriution systems PB104013-34 The supplementary protectors are used in direct current circuits (Industrial control and automations, transport, renewale energy...). They comine the following functions

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL ed and

More information

Tmax Molded Case Circuit Breakers

Tmax Molded Case Circuit Breakers Tmax Molded Case Circuit s Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product technology. Never before has the industry seen such high

More information

Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches. Ex9 Series - M. na.noark-electric.

Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches. Ex9 Series - M. na.noark-electric. Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches MS50T3L M2N200T3L Ex9 Series - M na.noark-electric.com NOARK Ex9 Series - M Features Molded Case Circuit

More information

Technical Information

Technical Information -100 Controller IEC Performance Data (CSA C22.2, UL 508 No. 14 in connection with a short-circuit protection device Catalog No. -100... 25A 40A 63A 90A Maximum Short-Circuit Current 480V [ka] 65 65 42

More information

Emergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0

Emergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0 MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches

More information