PVGard 600 and 1000 Vdc solar photovoltaic circuit breakers
|
|
|
- Blaise Washington
- 6 years ago
- Views:
Transcription
1 Supersedes October 2013 photovoltaic circuit breakers Contents Description Page Product description PVGard 600 Vdc Technical data Dimensions Time/current curves PVGard 1000 Vdc Technical data Dimensions Time/current curves Product description Thermal-magnetic circuit breakers Designed to meet UL 489B for solar photovoltaic circuit protection Both 100% and 80% rated breakers available 50 C calibrated Can be applied in grounded, ungrounded, or bipolar systems Ability to open on signal from DC arc or ground fault detector Two PVGard lineups: 600 Vdc per-pole breaker and switch; each pole rated 600 Vdc 1000 Vdc poles-in-series breaker and switch; requires poles in series connection UL File EE350638, Category Control Number DIUR Table 1. PVGard 600 Vdc Current Ratings by Frame Frame ampere Rating JG PVS KD PVS Table 2. PVGard 1000 Vdc Current Ratings by Frame Frame ampere Rating FD PV KD PV LG PV MDL PV
2 PVGard 600 Vdc Technical data Table 3. Technical Data for PVGard 600 Vdc Per-Pole Solar PV Circuit Breakers JG PVS Number of 600 Vdc circuits 3 3 KD PVS Maximum voltage rating 600 Vdc 600 Vdc Ampere range A A Interrupting capacity at 600 Vdc 1.2 ka 3 ka Time constant 1 ms 1 ms Trip unit type Thermal-magnetic Thermal-magnetic Rated impulse withstand voltage Main conducting paths Auxiliary circuits 8 kv 4 kv 8 kv 4 kv Endurance Mechanical operations Electrical operations Maximum switching frequency 10, per hour per hour Third-party certification UL 489B UL 489B Environment Design ambient temperature Maximum current at 60 C, as % of rated current Maximum current at 70 C, as % of rated current Operating temperature range Storage temperature range Suitable for freeze temperatures to 40 C Relative humidity 50 C 93% 85% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing Suitable for reverse-feed applications Yes Yes Mounting permissible mounting position 50 C 93% 85% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing 90º 90º 90º 90º Connection diagrams Load Suitable for grounded or ungrounded systems Suitable for quantity (3) 600 Vdc circuits Terminations Al/Cu wire TA250FJ: (1) #8 350 kcmil TA300K: (1) #3 350 kcmil 3TA251FJK1: (2) 2/0 (2) 4/0 a TA350K: (1) kcmil 3TA251FJK2: (2) 2/0 (2) 4/0 b TA403K: (2) 1/0 400 kcmil 3TA402K: (1) kcmil c Cu wire T250FJ: (1) #4 350 kcmil T300K: (1) #3 350 kcmil Dimensions in inches (mm) Height Width Depth 7.00 (177.8) 4.13 (104.9) 3.57 (90.7) Weight in lbs a Three terminals with terminal shield as a kit. b Three terminals with two interphase barriers as a kit. c Not UL 489B recognized size for maximum of 400A breaker (257.3) 5.50 (139.7) 4.10 (104.1) 2
3 Technical Data TD E Dimensions JG PVS A breaker outlines and drilling plans 2.06 (52.4) 4.13 (104.8) 3.57 (90.6) 3.34 (84.9) 0.50 (12.7) Line End 1.91 (48.4) 4.99 (126.8) 2.91 (73.8) 0.78 (19.8) 6.28 (159.5) 6.50 (165.1) 7.00 (177.8) On 23.5 Tripped (45.0) 0.38 (9.5) 3.95 (100.4) 0.99 (25.0) 1.98 (50.4) 3.97 (100.7) Off 4.0 Reset 6.4 A 0.38 (9.5) Pivot 3.10 (78.8) 0.93 (23.7) 0.69 (17.5) 0.69 (17.5) Load End 4X Ø 0.20 (5.0) through (3.81) from Top, Line End (3.91) from Top, Load End (6.76) 0.50 (12.7) from Bottom, Both Ends for M4 x 0.7 x 90 mm Mounting Screws 0.03 (0.8) Dimensions for Terminal Shield 1.19 (30.2) 0.59 (15.1) 0.50 (12.7) 0.25 (6.4) 3.34 (84.9) B Section A-A 3.44 (87.3) 0.63 (15.9) 0.13 (3.2) 1.00 (25.4) 1.94 (49.2) Breaker Dimensions Status A B Force, Lbs On 3.96 (100.7) 4.27 (108.4) 19 Tripped 3.38 (85.8) 4.41 (112.0) Off 2.71 (68.8) 4.41 (112.0) 14 Reset 2.60 (66.0) 4.39 (111.5) 21 Dimensions in parentheses in millimeters (17.5) Wide Conductor with Ø 0.33 (8.3) Hole Line and Load End Figure 1. Type JG PVS A Outline 3
4 Line End 2.06 (52.4) 4.13 (104.8) 2.06 (52.4) 4.13 (104.8) 1.25 (31.8) 0.63 (15.9) 0.78 (19.8) 3.95 (100.4) R 0.19 (4.8) 3.95 (100.4) 0.91 (23.0) (65.1) (177.8) (139.7) 3.06 (77.8) 4.13 (104.8) 2.08 (52.8) 7.00 (177.8) Load End 0.69 (17.5) 4.00 (101.6) 2.00 (50.8) Figure 2. Type JG PVS A Drilling Plans 4
5 Technical Data TD E Time/current curves JG PVS circuit breaker time/current curves Equipped with type thermal-magnetic trip unit. For application and coordination purposes only. Based on cold start at rated ambient temperature. Connected with four feet of rated wire (90 C) per terminal with all poles wired in series. Tested in open air Maximum Breaker Rating Rated Amperes (I n ) 90, 100, 125, 150, 175, 200, 225, 250, Instantaneous Trip Settings are for 700% of trip unit rating Instantaneous trip values are for single-pole 100 Interruption Rating (ka) Number of Poles in Series 600 Vdc ka Note: For A ratings, instantaneous trip is above interruption rating. For application and coordination purposes only. Minimum 10 Time in Seconds 1 7x +20% 20% 0.1 Interruption rating determines end of curve Current in Multiples of Rating (I n ) Figure 3. JG PVS Circuit Breakers Time/Current Curves 5
6 PVGard 1000 Vdc Technical data Table 4. Technical Data for PVGard 1000 Vdc Solar PV Circuit Breakers (100% and 80% Rated Frames) FD PV KD PV LG PV MDL PV Number of poles Maximum voltage rating 1000 Vdc 1000 Vdc 1000 Vdc 1000 Vdc Maximum current rating 100A 350A 400A 600A Interrupting capacity at 1000 Vdc 3 ka 5 ka 5 ka 7.5 ka Time constant 1 ms 1 ms 1 ms 1 ms Ampere range A A A A Trip unit type Thermal-magnetic Thermal-magnetic Thermal-magnetic Thermal-magnetic Rated impulse withstand voltage Main conducting paths Auxiliary circuits 8 kv 4 kv 8 kv 4 kv 8 kv 4 kv 8 kv 4 kv Endurance Mechanical operations Electrical operations Maximum switching frequency 10, per hour 10, per hour per hour per hour Third-party certification UL 489B UL 489B UL 489B UL 489B Environment Design ambient temperature Maximum current at 60 C, as % of rated current Maximum current at 70 C, as % of rated current Operating temperature range Storage temperature range Suitable for freeze temperatures to 40 C Relative humidity 50 C 91% 88% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing 50 C 91% 88% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing 50 C 93% 88% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing Suitable for reverse-feed applications Yes Yes Yes Yes Mounting permissible mounting position 50 C 93% 88% 20 C to +50 C 20 C to +70 C Option 0 to 95% noncondensing 90º 90º 90º 90º Connection diagrams Load Load (A) a b Terminations Al/Cu wire #6 300 kcmil (2) 3/0 250 kcmil (2) #2 500 kcmil (3) 3/0 400 kcmil Cu wire #4 4/0 (2) 3/0 250 kcmil (2) #2 500 kcmil (3) 3/0 300 kcmil Dimensions in inches (mm) Height Width Depth 6.00 (152.4) 5.50 (139.7) 3.38 (85.9) (257.3) 7.22 (183.4) 4.09 (103.9) (257.3) 7.22 (183.4) 4.09 (103.9) Weight in lbs a Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. b Suitable for use on ungrounded systems only (406.4) 8.25 (209.5) 4.06 (103.1) 6
7 Technical Data TD E Dimensions FD PV four-pole breaker outlines and drilling plans Front View Side View 2.06 (52.4) 5.50 (139.7) 6X Ø 0.45 (11.43) Line End (26.2) (19.1) (11.9) 3.50 (88.9) 3.39 (86.0) 3.19 (81.0) 1.41 (35.7) 4X R 0.16 (4.0) 0.27 (6.8) 2.72 (69.1) On Off 4.00 (101.6) 4.50 (114.3) 5.06 (128.6) 6.00 (152.4) On 14.9 Trip (44.8) 3.63 (92.1) 0.27 (6.7) Off 4.3 Reset 6.5 A Pivot 4X Ø (5.0) Hole Ø (8.33) (49.23) from Top Ø (8.74) (16.66) from Bottom for (#8) x (38.1) Mounting Screw 0.69 (17.5) Load End 3.19 (81.0) B (1.6) (6.7) 1.00 (25.4) 0.37 (9.4) 0.50 (12.7) 0.19 (4.7) 0.75 (19.1) 0.08 (2.0) 0.74 (18.8) 1.56 (39.7) Dimensions Breaker Status A B Force, Lbs On 2.91 (74.0) 4.02 (102.0) 14 Tripped 2.57 (65.2) 4.07 (103.4) 4 Off 2.14 (54.4) 4.07 (103.4) 16 Reset 2.06 (52.2) 4.06 (103.1) 21 Dimensions in parentheses in millimeters (12.7) Wide Conductor with Ø 0.25 (5.35) Hole Load End Ø (5.56) Hole Load End Figure 4. Type FD PV Four-Pole Outline 7
8 Drilling Plans Front Connected Front Cover Cutout Line End 2.75 (69.9) 0.69 (17.5) 6X Ø 0.16 (4.2) 32 Tap 1.19 (30.2) 0.60 (15.2) R 0.25 (6.4) 3.63 (92.1) 2.88 (73.0) 2.91 (73.8) 6.00 (152.4) 4.50 (114.3) 0.59 (15.1) 2.06 Load End (52.4) 5.50 (139.7) Figure 5. Type FD PV Four-Pole Drilling Plans 8
9 Technical Data TD E KD PV four-pole breaker outlines and drilling plans Front View Side View 2.75 (69.9) 7.22 (183.4) Line End (21.4) (15.9) 4.31 (109.6) 3.81 (96.9) 2.94 (74.6) R 0.19 (4.8) 2.81 (71.5) 0.50 (12.7) 5.77 (146.5) 7.41 (188.1) 1.25 (31.8) R 0.25 (6.4) 3.56 (90.5) On/I Off/O 2.39 (60.7) 4.00 (101.6) 0.25 (6.4) 8.44 (214.3) 8.88 (225.4) (257.2) On 15.1 Tripped 5.6 Off 3.5 Reset 4.9 A 1.07 (27.1) Pivot R 0.19 (4.8) 4.78 (121.4) Dimensions for Extended Terminals and Barrier Style Numbers 4212B60G02, 4212B61G02 and 1492D24H (29.4) (23.8) 3.81 (96.9) 0.19 (4.8) 0.88 (22.2) 0.86 (21.8) 2.44 (61.9) 1.22 (31.0) 0.44 (11.1) Load End 6X Ø 0.28 (7.1) Mounting Holes Ø 0.50 (12.7) 2.88 (73.0) from Top, Load End Ø 0.50 (12.7) 2.63 (66.7) from Top, Line End Ø 0.44 (11.1) 0.75 (19.1) from Bottom Both Ends for x 1.50 (38.1) Mounting Screws 2.38 (60.3) Breaker Status Dimensions A On 5.40 (137.1) 4.79 (121.6) 30 Tripped 4.77 (121.2) 4.91 (124.7) Off 4.16 (105.7) 4.93 (125.2) 25 Reset 4.07 (103.4) 4.92 (125.0) 35 Dimensions in parentheses in millimeters. B 4.06 (103.2) B 0.47 (11.9) 0.6 (1.6) Force, Lbs 0.77 (19.5) 1.06 (27.0) 0.75 (19.1) Wide Conductor with Ø 0.39 (9.9) Hole Line and Load End Figure 6. Type KD PV Four-Pole Outline 9
10 Front Connected Terminals Front Cover Cutout Line End 3.44 (87.3) 0.86 (21.8) 6X Ø 0.25 (6.4) 20 Tap 1.31 (33.3) 2.63 (66.7) R 0.34 (8.7) 5.77 (146.5) 4.92 (125.0) 3.75 (95.3) (257.2) 8.44 (214.3) 1.64 (41.7) R 0.19 (4.8) 0.83 (21.0) 1.25 (31.8) 2.75 (69.8) Load End 7.22 (183.4) 2.39 (60.7) 4.78 (121.5) Figure 7. Type KD PV Four-Pole Drilling Plans 10
11 Technical Data TD E LG PV four-pole breaker outlines and drilling plans Front View Side View 7.22 (183.4) 2.75 (69.9) Line End (44.5) (21.4) (15.9) 4.31 (109.4) 4.06 (103.2) 3.72 (94.4) R 0.25 (6.4) 7.28 (184.9) 3.04 (77.1) 1.59 (40.4) 8.44 (214.4) 7.23 (183.7) 8.88 (225.4) (257.2) On 17.4 Tripped 5.0 Reset 18.0 Off 14.2 A 2.17 (55.2) 0.44 (11.1) 5.58 (141.7) Pivot Dimensions for Extended Terminals and Barrier Style Number 69D (54.0) (30.2) 0.86 (21.8) 1.18 (23.0) 2.31 (58.6) Ø 0.44 (11.1) 1.15 (29.3) 0.59 (15.0) Load End 6X Ø 0.22 (5.5) Mounting Holes Ø 0.44 (11.1) 0.55 (13.9) from Top, Load End Ø 0.44 (11.1) 0.62 (15.9) from Top, Line End Ø 0.21 (5.3) 0.50 (12.7) from Bottom Both Ends for M5 x 0.8 x 100 mm Mounting Screws 4.06 (103.2) B Section A-A 0.41 (10.3) 0.06 (1.6) 3.98 (101.2) 0.13 (3.2) 0.85 (21.5) 1.34 (34.1) 2.38 (60.3) 0.97 (24.6) Wide Conductor with Ø 0.52 (13.1) Hole Line and Load End Breaker Status Dimensions A On 5.32 (135.1) 5.34 (135.6) 44 Tripped 4.62 (117.4) 5.43 (137.9) Off 3.55 (90.0) 5.27 (133.9) 56 Reset 3.34 (84.9) 5.20 (132.1) 45 Dimensions in parentheses in millimeters. B Force, Lbs Figure 8. Type LG PV Four-Pole Outline 11
12 Line End 3.44 (87.3) 0.86 (21.8) 6X M5 X (68.6) 1.35 (34.3) 5.58 (141.7) 4.73 (120.2) R 0.28 (7.0) (257.2) 8.44 (214.3) 1.64 (41.7) 1.33 (33.9) 3.34 (84.8) 1.58 (40.2) Load End 2.75 (69.9) 7.22 (183.4) 7.06 (179.3) 2.67 (67.8) Figure 9. Type LG PV Four-Pole Drilling Plan 12
13 Technical Data TD E MDL PV three-pole breaker outlines and drilling plans 4.13 (104.8) 2.75 (69.9) 8.25 (209.6) 2.75 (69.9) 0.63 (15.9) Line End 4.38 (111.1) 4.06 (103.2) 6.44 (163.6) 1.19 (30.2) R 0.25 (6.4) (374.7) 8.30 (210.9) (269.1) R 0.19 (4.8) 3.09 (78.6) 1.50 (38.1) 1.92 (48.7) On/I On/I Off/O Off/O 3.64 (92.5) 7.28 (184.9) (406.4) On 14.7 Tripped 0.2 Off 19.2 Reset 24.2 A 2.05 (51.9) Pivot 1.19 (30.2) 4X Ø 0.38 (9.5) Mounting Holes Ø 0.74 (18.7) 3.33 (84.6) from Top Ø 0.59 (15.1) 0.36 (9.1) from Bottom for 0.31 (7.9) 16 x 1.75 (44.5) Mounting Screws 4.06 (103.2) B Section A-A 0.06 (1.6) 4.06 (103.2) 4.00 (101.6) 3.72 (94.4) 1.63 (41.3) 3.25 (82.6) 1.63 (41.3) 0.81 (20.6) (12.7) (7.9) Load End Breaker Status Dimensions A On 8.74 (222.0) 5.34 (135.6) 49 Tripped 7.88 (200.2) 5.50 (139.6) Off 6.72 (170.8) 5.36 (136.2) 52 Reset 6.44 (163.5) 5.27 (133.7) 64 Dimensions in parentheses in millimeters. B Force, Lbs 1.87 (47.6) 1.88 (47.6) Wide Conductor with Ø 0.42 (10.6) Hole Line and Load End 0.53 (13.5) Figure 10. Type MDL PV Three-Pole Outline 13
14 Line End 2.75 (69.9) 4X Ø 0.31 (7.9) 3.44 (87.3) 8.30 (210.9) 7.68 (195.0) R 0.25 (6.4) (406.4) (374.7) 2.29 (58.2) R 0.19 (4.8) 1.33 (33.7) 3.28 (83.3) 1.50 (38.1) Load End 4.13 (104.8) 8.25 (209.6) 3.64 (92.5) 7.28 (184.9) Figure 11. Type MDL PV Three-Pole Drilling Plans 14
15 Technical Data TD E Time/current curves 10,000 KD PV circuit breaker time/current curves Equipped with type thermal-magnetic trip unit Maximum For application and coordination purposes only. Based on cold start at rated ambient temperature. Connected with four feet of rated wire (90 C) per terminal with all poles wired in series. Tested in open air. Breaker Rating Rated Amperes (I n ) 125, 150, 175, 200, 225, 250, 300, 350 Interruption Rating (ka) Number of Poles in Series 1000 Vdc 4 5 ka Instantaneous Trip Settings are for 700% of trip unit rating Instantaneous trip values are for single-pole Minimum 10 Time in Seconds x +20% 20% Interruption rating determines end of curve ,000 10, ,000 1,000,000 Current in Percent of Breaker Trip Unit Rating (I n ) Figure 12. KD PV Circuit Breakers Time/Current Curves 15
16 10,000 LG PV circuit breaker time/current curves Equipped with type thermal-magnetic trip unit. For application and coordination purposes only. Based on cold start at rated ambient temperature. Connected with four feet of rated wire (90 C) per terminal with all poles wired in series. Tested in open air Breaker Rating Rated Amperes (I n ) 250, 300, 350, 400 Instantaneous Trip Settings are for 700% of trip unit rating Instantaneous trip values are for single-pole 100 Interruption Rating (ka) Number of Poles in Series 1000 Vdc 4 5 ka Maximum Minimum 10 Time in Seconds x +20% 20% Interruption rating determines end of curve ,000 Current in Multiples of Rating (I n ) Figure 13. LG PV Circuit Breakers Time/Current Curves 16
17 Technical Data TD E 10,000 MDL PV circuit breaker time/current curves Equipped with type thermal-magnetic trip unit. For application and coordination purposes only. Based on cold start at rated ambient temperature. Connected with four feet of rated wire (90 C) per terminal with all poles wired in series. Tested in open air Breaker Rating Rated Amperes (I n ) 300, 350, 400, 450, 500, 600 Instantaneous Trip Settings are for 700% of trip unit rating Instantaneous trip values are for single-pole Maximum Interruption Rating (ka) Number of Poles in Series 1000 Vdc ka 100 Minimum 10 Time in Seconds x +20% 20% Interruption rating determines end of curve , ,000 Current in Percent of Breaker Trip Unit Rating (I n ) Figure 14. Type MDL PV Circuit Breakers Time/Current Curves 17
18 18
19 Technical Data TD E 19
20 Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com 2014 Eaton All Rights Reserved Printed in USA Publication No. TD E / Z14800 February 2014 Eaton is a registered trademark. All other trademarks are property of their respective owners.
Series C, F-frame molded case circuit breaker, 15A, Two-pole, Thermal Magnetic Trip, FD Breaker
FD2015 2 Pole 15A FD Eaton Corp Catalog Number Manufacturer Description Weight per unit Product Category Features amperage rating 15 Frame Size F-frame interrupt rating 35 kaic at 480V Poles 2 Trip Type
Series C, F-frame molded case circuit breaker, 125A, Three-pole, Thermal magnetic trip. Thermal magnetic
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 HFD3125 HFD3125 125A 3P CKT BRKR Eaton Corp Catalog Number Manufacturer Description Weight per unit Product Category Features
Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI
. Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
Engine Generator Circuit Breakers
Engine Generator Circuit Breakers Product Description............................................. 2 Application Description........................................... 2 Standards and Certifications......................................
15-I73E CAT REF.
& www.terasaki.co.jp 5-I7E CAT REF. TABLE OF CONTENTS General - Introduction - General - Selection Chart - Ratings and Specifications - Air Circuit Breakers for DC50V-00V - Moulded Case Circuit Breakers
14-I73E CAT REF.
& www.terasaki.co.jp -I7E CAT REF. TABLE OF CONTENTS General - Introduction - General - Selection Chart - Ratings and Specifications - Air Circuit Breakers for DC50V-00V - Moulded Case Circuit Breakers
APPENDIX E. Electrical System Single Line Diagram Overcurrent Protection Study Overcurrent Protection Device Specifications
Student Resource Building University of California Santa Barbara Clement Fung Lighting Electrical Option APPENDIX E Electrical System Single Line Diagram Overcurrent Protection Study Overcurrent Protection
Electric vehicle auxiliary fuses 500 Vdc, A
Supersedes February 2017 BUSSMANN SERIES 500 Vdc, 20-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a TS16949 quality system for compliance with automotive requirements RoHS
Product Line Overview. The Most Logically Designed Contact Assembly
Circuit Breakers & Supplementary Protectors 15 00 Amperes for UL, CSA & IEC Applications Product Line Overview -3 General Information Cutler-Hammer Series G Molded Case Circuit Breakers provide increased
1489-M Circuit Breakers
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Terminal design helps prevent wiring misses Scratch- and solventresistant printing Suitable
Miniature Circuit Breakers
S00 Series Miniature S00 Series Miniature Circuit Breakers Description The S00 Series miniature circuit breaker offers a compact solution for protection requirements. The S00 devices are UL tested limiting
24.4. Miniature Circuit Breakers and Supplementary Protectors. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Miniature Circuit Breakers and Supplementary Protectors SPHM Supplementary Protector SPHM Supplementary Protector Product Description The SPHM Supplementary Protector is a dual rated product for both
Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches. Ex9 Series - M. na.noark-electric.
Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches MS50T3L M2N200T3L Ex9 Series - M na.noark-electric.com NOARK Ex9 Series - M Features Molded Case Circuit
Magnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 845-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-freemechanism and toggle actuation. A choice of switching characteristics
PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ)
PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ) Catalog Class 734 0734CT0201R1/07 07 CONTENTS Description..............................................Page Description.............................................
UTS400 SELECTION GUIDE CATALOG NUMBERING [PRODUCT SELECTION] UTS400 NT ATU 400A 3P LL LSIS UL MCCB
![UTS400 SELECTION GUIDE CATALOG NUMBERING [PRODUCT SELECTION] UTS400 NT ATU 400A 3P LL LSIS UL MCCB](/thumbs/90/103923509.jpg "UTS400 SELECTION GUIDE CATALOG NUMBERING [PRODUCT SELECTION] UTS400 NT ATU 400A 3P LL LSIS UL MCCB")
PRODUCT CATALOG SELECTION GUIDE UTS400 CATALOG NUMBERING [PRODUCT SELECTION] UTS400 NT ATU 400A 3P LL UL SERIES & FRAME: Susol 400AF PERFORMANCE Rating 80% 0% ka N NT 65 SUFFIX UL : UL 240Vac H HT 0 L
18-I73E CAT REF.
& www.terasaki.co.jp 1-I73E CAT REF. TABLE OF CONTENTS General 1-1 Introduction 1- General 1-3 Selection Chart 1- Ratings and Specifications -1 Air Circuit Breakers for DC350V-00V - Moulded Case Circuit
SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
Fusetron FRN-R Class RK5 250Vac/125Vdc A, dual element, time-delay fuses
Technical Data1019 Supersedes July 2013 Fusetron FRN-R Class RK5 250Vac/125Vdc Catalog symbols: FRN-R-_ (non-indicating) FRN-R-_ID (indicating) Description: Eaton Bussmann series advanced protection, energy
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series - B1NQ
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series - BNQ BNQD5T BNQD5 with Front Mounting Clips na.noark-electric.com NOARK Ex9 Series - BNQ Features The BNQ is compliant with UL/CSA/IEC standards
Thermal-Magnetic Circuit Breaker 2210-S291-P9M A
Thermal-Magnetic Circuit Breaker 0-S9-P9M-40033-...A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact
2.2. Molded Case Circuit Breakers. Contents. NG-Frame ( Amperes) Series G
. NG-Frame (00 ) NG-Frame (30 00 s) Product All Eaton NG-Frame circuit breakers are suitable for reverse feed use All NG-Frame circuit breakers are HACR rated Contents Page EG-Frame (5 5 s)..................
MS General Information Extended Product Type: MS
MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual
DPX Thermal magnetic and trip-free switches DPX 3 -I 250
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 Reference(s) : 420 205/ 207/ 208/209/ 215/ 217/ 218/ 219/ 235/ 237/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3.
HelioProtection HP10NH Photovoltaic fuse-links gpv 1000VDC
SPECIAL PURPOSE FUSES PHOTOVOLTAIC FUSES FEATURES & BENEFITS Mersen HP10NH photovoltaic (PV) fuse series was engineered and designed specifically for the protection of photovoltaic systems. Helio-Protection
Westinghouse Molded Case Circuit Breakers Engine Generator FG Amperes
Circuit s FG 15-150 Amperes Description Page Type FG Three-Pole... 1 Type JG Three-Pole... 3 Type KG Three-Pole... 5 Type G Three-Pole... 7 Type MG Three-Pole... 9 Type NG Three-Pole... 11 Cutler-Hammer
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
Table Types LD, HLD and LDC Thermal-Magnetic Circuit Breakers with Interchangeable Trip Units
-1 1 Amperes July 07 Product Selection Table -191. s, H and C Thermal-Magnetic Circuit s with Interchangeable Trip Units Maximum Continuous Ampere at 40 C 2-Pole 0 0 3-Pole 0 0 4-Pole 0 0 Magnetic trip
Technical data for manual motor starters Type MS325
for manual mor starters Type MS325 General data Rated voltage 600 V Rated current 25 A (14 setting ranges, 0.1 25A) Rated frequency 50-60 Hz Electrical and mechanical life endurance 100,000 operations
Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches Ex9 Series - M
Data Sheet Molded Case Circuit Breakers Molded Case Motor Circuit Protectors Molded Case Switches Ex9 Series - M MS50T3L M2N200T3L na.noark-electric.com NOARK Ex9 Series - M Features Molded Case Circuit
Low voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
PD-Series Ground Fault Circuit Protection
PD-Series Ground Fault Circuit Protection SmartGuard is an equipment ground fault protection device that functions as a standard high-quality Carling hydraulic/ magnetic circuit breaker, offering customized
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR400 400A 250V TD Class RK5 Dual Elem Fuse-Fusetron Catalog Number Manufacturer Description Weight per unit Product
DPX earth leakage DPX 3 -I earth leakage
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 + earth leakage Reference(s) : 420 225/ 227/ 228/229/ 255/ 257/ 258/ 259/ 285/ 287/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3.
Magnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics
6.3 mm reverse quick connect
BUSSMANN SERIES Pre-production and sample electric vehicle auxiliary fuses 500 Vdc, 5-50 A Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a IATF 16949 quality system for compliance
Bussmann 10x38mm Photovoltaic fuses 1000Vdc, 1-30A
Technical Data Effective March 0 Bussmann x38mm Photovoltaic fuses Operating class gpv and UL PV fuse links PV Fuse coordination With thin film cells and, 5 and crystalline silicon cells Description A
Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
Technical Information
-100 Controller IEC Performance Data (CSA C22.2, UL 508 No. 14 in connection with a short-circuit protection device Catalog No. -100... 25A 40A 63A 90A Maximum Short-Circuit Current 480V [ka] 65 65 42
MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers
IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when
Electronic overload relays EF205 and EF370
Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
Interrupting Capacity (Symmetrical Amperes) Volts ac (50/60 Hz) Y/ ,000 25,000. Frame Only E2L3600F
-220 Mining Service Circuit s Table -395. Interrupting Capacity Ratings Circuit Interrupting Capacity (Symmetrical Amperes) Volts ac (50/60 Hz) Volts dc 240 480 1000Y/577 250 E 2 L E 2 LM 65,000 35,000
12-I73Eb CAT REF.
& www.terasaki.co.jp -I7Eb CAT REF. TABLE OF CONTENTS General - Outline Dimensions 5- Introduction - DC Air Circuit Breakers Outline Dimensions General - Selection Chart - AR6S, AR0S 5- AR5S, ARS 5- Ratings
S200 UL 489 Series. Miniature circuit breakers S200. Features. Description
UL 489 Series UL 489 Series Description The Series miniature circuit breaker offers a compact solution for protection requirements. The U AND UP devices are UL 489 tested limiting and DIN rail mounted.
MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
Low voltage moulded case circuit breaker EB2
Low voltage moulded case circuit breaker EB2 Product series description unit condition Model-type Number of poles Nominal current ratings Electrical characteristics Rated operational voltage Rated insulation
KT4 Manual Motor Starter
KT4 Manual Motor Starter Ideal for use as a manual starter The KT4 is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one
Thermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker -F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 694 with trip free mechanism) offering the choice of single
Series KTU7 UL489 Molded Case Circuit Breakers
Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed
Magnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics
Bolted contact switches. Pringle switches
Bolted contact switches Pringle switches Eaton s Pringle bolted contact switches History Eaton s PringleT switches have helped pioneer the development of high-quality electrical products for commercial
SIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A
Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They
DPX Magnetic only
87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 5. CONFORMITY
Ideal for use as a manual starter
Manual Motor Starter Ideal for use as a manual starter The is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one compact
Thermal-magnetic Miniature Circuit Breaker 4230-T...
Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail
Magnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
Circuit Breakers Naval Shipboard Use
Circuit Breakers Naval Shipboard Use Circuit Breakers for Naval Shipboard Use Contents Description Page Description Page Description Page Description Page Selector Guide for Navy Circuit Breakers......
Type BR thermal magnetic trip curve results
Trip Curves TC00EN Effective April 06 Type BR thermal magnetic trip curve results Contents Description Page. Types BR, BD, BQ, BQC, BRH, GFCB, GFCBH -A Curve No. SC-49-9.... Types BR, BD,BQ, BRH,GFCB,
Molded Case Circuit Breakers
Molded Case Circuit Breakers Series G Circuit Breakers.1 Introduction Product Overview......................................... V4-T- Typical Applications........................................ V4-T-
cor Long Run Experience
Moulded Case Circuit Breakers Moulded Case Circuit Breakers 16-1250A cor Long Run Experience cor Breaking capacity (according to IEC 947-2 at 415V) Icu 100 D160L D250L D400L D630L 70 60 DH800 50 35 30
Thermal-Magnetic Circuit Breaker M1-...
Thermal-Magnetic Circuit Breaker 320-...-M-... Description Two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 6034). The addition of a magnetic tripping
Table Line and Load Terminals. Terminal Body Material. Wire Type. Aluminum Copper Aluminum. English English English.
-174 Series C Molded Case Circuit s July 7 Molded Case Switches Refer to Eaton for UL listed, series tested Molded Case Switch application data. Table -278. Molded Case Switches Cont. Amp Rating at 40
System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489
System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU 200 M is ABB s solution for UL 489 branch
Bulletin 1489 Circuit Breakers. Selection Guide
Bulletin 1489 s Selection Guide Bulletin 1489-A Overview/Description Bulletin 1489-A s Energy-limiting design protects downstream components better than conventional breakers during short circuits Field-mountable
Thermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
SIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
PB-Series. GFCI/ELCI & Panel Seal
PB-Series GFCI/ELCI & Panel Seal The PB-Series utilizes the hydraulic magnetic principle which provides precise operation and performance even when exposed to extremely hot and/or cold application environments.
Series KTU7 UL489 Molded Case Circuit Breakers
Series UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s series of UL are UL489 and CE listed for global applications. The current
L-Frame. With Standard Line and. Standard Terminals Only. Catalog Number. Price U.S. $ LDB2300 LDB2350 LDB2400 LDB2450 LDB2500 LDB2600
January 01 Vol. 1, Ref. No. [05] 1 Amperes 12- Table 12-99. Type Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Maximum Continuous Ampere 2-Pole 0 0 3-Pole 0 0 V AC Rated, 0V DC
Electronic circuit breaker EBU10-T
Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions
Installation Instructions for KPS and KPH Circuit Breakers and Molded Case Switches
Instruction Leaflet IL 0106001E Contents Description Page Introduction.......................... Installation............................ Manual Operation and Thermal Magnetic Trip Unit Adjustment.......................
Thermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of
AP/UP, AP/MIL Series Magnetic Circuit Protectors
AP/UP, AP/MIL AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction 68 Single Pole 69 Multi-Pole 70 Configurations 72 Operating Characteristics 73 Delay Curves 74 Specifications 75 Decision Tables
Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
Electronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
Molded Case Circuit Breakers
Series G Circuit Breakers.1 Introduction Product Overview........................................ V4-T- Typical Applications....................................... V4-T- Series G in Eaton Assemblies...............................
sirco-ul_004_b_cat 100A to 2000A - 600VDC and 1000VDC UL98B Listed
site_317_a sirco-ul_22_b_cat sirco-ul_4_b_cat 1A to 2A - 6VDC and 1VDC UL98B Listed  Function non fusible disconnects are heavy duty switches that break and make 6VDC or 1VDC photovoltaic circuits on
DPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
Submersible Vacuum Fault Interrupters
Submersible Vacuum Fault Interrupters UG Distribution Medium Voltage Vacuum Fault Interrupters Functional Specification Guide PS024002EN Functional Specification for 2.4kV to 17.5kV UG Distribution Medium
L-Frame LD F. Circuit Breaker/ Frame Ampere Rating. Trip Unit Rating/ Plug Ampere Rating LD T5 7 W
July 07 5 Amperes -111 Product Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
I r A short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting.
DATASHEET - ZB12-2,4 Delivery program Overload relay, 1.6-2.4 A, 1N/O+1N/C Part no. ZB12-2,4 Catalog No. 278437 Eaton Catalog No. XTOB2P4BC1 EL-Nummer 0004131832 (Norway) Product range Overload relay ZB
Control Circuit Protection
Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC
VL Circuit Breaker Features & Benefits. powerful ideas RELIABLE SOLUTIONS
VL Circuit Breaker Features & Benefits powerful ideas RELIABLE SOLUTIONS A Solutions Oriented Circuit Protection Family The Tangram An ancient Chinese game in which a few simple components provide endless
System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
Safety, Reliability and Performance verified with the KEMA KEUR mark. Series G Moulded Case Circuit Breakers
Series G Moulded Case Circuit Breakers Product Focus Up to 690 Vac 18kA to 100kA Icu 16-2500 Amperes IEC 60947-2 Safety, Reliability and Performance verified with the KEMA KEUR mark Safety, Reliability
The breakers offer thermal-magnetic trip protection according to Z and K characteristics.
Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific
Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
Low-Peak LPJ Class J 600Vac/300Vdc, 1-60A, dual element, time-delay fuses
Technical Data 6 Supersedes August 2015 Low-Peak LPJ Class J 600Vac/Vdc, 1-60A, Catalog symbol: LPJ-(amp)SP (non-indicating) LPJ-(amp)SPI (indicating) Description: Bussmann series Ultimate protection LPJ
Product index. 4 - Manual motor protectors. Phone: Fax: Web: -
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
FR circuit breaker - hydraulic magnetic, railway, very high current. Datasheet
FR circuit breaker - hydraulic magnetic, railway, Datasheet very high current Features Ideal for very high current applications Precise, temperature independent operation Panel mount Integrated auxiliary
GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
Low voltage moulded case circuit breaker EB2
Low voltage moulded case circuit breaker EB2 Product series description unit condition Model-type Number of poles Nominal current ratings Electrical characteristics Rated operational voltage Rated insulation
Supplementary Protectors. Circuit Breakers & Circuit Breakers & Supplementary Protectors Contents
-1 May 008 Circuit Breakers & Supplementary Protectors Contents Description Page Series C vs. Series G Typical Applications........................................... - Series G Globally Accepted Breaker
Single Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
DPX Electronic + earth leakage
87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 DPX 3 250 Electronic + earth leakage CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. ELECTRICAL AND MECHANICAL
AR circuit breaker - Hydraulic magnetic,
AR circuit breaker - Hydraulic magnetic, Datasheet railway, small Features Description Small hydraulic magnetic circuit breaker for railway applications to protect electronic equipment and components against
TMC 91H is now TMC 60 C Series
TMC 91H is now TMC 60 C Series The new Thermal Magnetic Circuit Breaker is once again available and better than ever! The new version is not only UL recognized with the same electrical performance as the
Features 1 Phase HP/Volts 1/6 HP AT 230 V 3 Phase HP/Volts 1/2 HP AT 200/230 V, 1-1/2 HP AT 460/575 V
804 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A07NN A Man Motor Protector Eaton Corp Catalog Number A07NN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;