Series G Moulded Case. Circuit Breakers. Series G Moulded Case Circuit Breakers 1

Transcription

1 1 Series G Moulded Case Circuit Breakers Description Series G Globally Accepted Breaker General Information Product Line Overview Electrical Characteristics Amperes (EG Frame) Amperes (JG Frame) Amperes (LG Frame) Amperes (NG Frame) Amperes (RG Frame) Motor Circuit Protectors Motor Protector Circuit Breaker Earth Leakage Modules Special Features and Accessories Plug-in Blocks and Drawout Cassettes Handle Mechanisms Dimensions Page

2 Amperes for UL, CSA & IEC Applications Product Line Overview General Information Cutler-Hammer Series G Moulded Case Circuit Breakers provide increased performance in considerably less space than standard circuit breakers or comparable fusible devices. The G signifies global applications: Series G circuit breakers are marked with UL, CSA, CE, IEC and KEMA KEUR listings. Other advantages include: Field-fit accessories. Common accessories through amperes. Electronic trip units from 20 to 0 amperes. CSA and UL-listed and IEC-rated, 30 ma ground fault/earth leakage modules. Built-in ground fault protection down to 20 amperes. The EG, JG and LG frames are designed around space-saving footprints. The NG and RG use the proven Cutler-Hammer Series C ND and RD designs but use metric threading on their line and load conductors. Cutler-Hammer Series G Circuit Breakers meet applicable CSA C22.2 No. 5, UL 89 and IEC standards. The Cutler-Hammer Series G family includes five frame sizes in ratings from 15 to 0 amperes. Series G offers a choice of several interrupting capacities up to 65 ka at volts ac (200 ka at 20 volts ac). The Most Logically Designed Contact Assembly The flexibility and outstanding performance characteristics of Cutler- Hammer Circuit Breakers are made possible by the best contact designs in circuit breaker history. Our patented technology creates a high-speed blow-open action using the electromechanical forces produced by high-level fault currents. Cutler-Hammer Circuit Breakers are operated by a toggle-type mechanism that is mechanically trip-free from the handle so that the contacts cannot be held closed against short circuit currents. Tripping due to overload or short circuits is clearly indicated by the position on the handle. This remarkably fast and dependable contact action is designed to enhance safety. Thorough In-Plant Testing The quality, dependability and reliability of every Cutler-Hammer Circuit Breaker is ensured by a thorough program of in-plant testing. Two calibration tests are conducted on every pole of every circuit breaker to verify the trip mechanism, operating mechanism, continuity and accuracy. ISO Certification Cutler-Hammer Circuit Breakers are manufactured in ISO certified facilities. Current Limiting Characteristics Circuit breakers are current limiting because of their high repulsion contact arrangement and use of state-ofthe-art arc extinguishing technology. Eaton offers one of the most complete lines of current limiting breakers in the industry. The industrial breakers are available in current limiting versions with interrupting capacities up to 65 ka at V without fuses in the same physical size as standard and high interrupting capacity breakers. Operating Mechanisms Cutler-Hammer Circuit Breakers have a toggle handle operating mechanism, which also serves as a switching position indicator. The indicator shows the positions of: ON, OFF and TRIPPED. The toggle handle snaps into the TRIPPED position if the breaker is tripped by one of its overcurrent, short circuit, shunt or undervoltage releases. Before the circuit breaker can be reclosed following a trip-out, the toggle handle must be brought beyond the OFF position (RESET). The circuit breaker can then be reclosed. As an additional switching position indicator for EG- to RG-Frame circuit breakers, there are two windows on the right and on the left of the toggle handle, in which the switching state is indicated by means of the colors red, green and white corresponding to the ON, OFF and TRIPPED positions respectively. Standard calibration is 0 C. For applications in high ambient temperature conditions, 50 C factory calibration is available on thermal magnetic breakers (not CSA/UL). OFF RESET ON Tripped Figure 1. Positions of the Toggle Handle Drive

3 15 0 Amperes for UL, CSA & IEC Applications Product Line Overview 3 Standards and Certifications Cutler-Hammer Moulded Case Circuit Breakers from Eaton are designed to conform with the following international standards: Australian Standard AS 218 and AS Moulded Case Circuit Breakers. British Standards Institution Standard EN International Electrotechnical Commission Recommendations IEC Circuit Breakers. Japanese T-Mark Standard Moulded Case Circuit Breakers. National Electrical Manufacturers Association Standards Publication No. AB Moulded Case Circuit Breakers. South African Bureau of Standards, Standard SANS 156, Standard Specification for Moulded Case Circuit Breakers. Swiss Electro-Technical Association Standard SEV 97.2, Safety Regulations for Circuit Breakers. Union Technique de l Electricite Standard NF C , Low Voltage Switchgear and Control Gear Circuit Breaker Requirements. Verband Deutscher Elektrotechnike (Association of German Electrical Engineers) Standard VDE 0660, Low Voltage Switchgear and Control Gear, Circuit Breakers. Global Third-Party Certification Certification marks ensure product compliance with the total standard via the third party witnessing of tests by globally recognized independent certification organizations. KEMA is a highly recognized, independent international organization that offers certification and inspection facilities for equipment in many industries. The KEMA-KEUR mark is the highest certification an electrical product can receive from KEMA. Our IEC Moulded Case Circuit Breakers are KEMA tested and certified. These breakers are also listed in accordance with UL 89, as well as CSA C22.2 No KEMA, UL and CSA provide ongoing follow-up testing and inspections to ensure that Cutler-Hammer Moulded Case Circuit Breakers continue to meet their exacting standards. General Information Eaton s electrical business, under the Cutler-Hammer brand, offers the widest variety of moulded case circuit breakers available today. Designed for electrical and machinery OEMs serving a range of industries and applications, these proven designs incorporate the latest in innovation with the high reliability that has been our hallmark since the advent of the circuit breaker in the 1920s. The Series C family ranges from 15 0 amperes, and includes thermalmagnetic breakers, electronic trip breakers, moulded case switches, motor circuit protectors, and specially designed breakers for Engine Generator, DC and mining applications. The new Series G line features an average 35% size reduction, common field-installable internal accessories, and advanced trip unit functionality that eliminates the need for rating plugs. These breakers meet the requirements of UL, CSA, IEC, CCC and CE, allowing the OEM to standardize on a design that meets the needs of their global customer base.

4 15 0 Amperes for UL, CSA & IEC Applications Frame Sizes EG through LG Electrical Characteristics Table 1. Electrical Characteristics Maximum EG JG LG Rated Current (Amperes) 125, , Breaker Type B E S H C E S H C U X E S H C U X of Poles 1 2, 3, 2, 3, 1 2, 3, 1 2, 3, 3, 2, 3, 3, 3, 3, 3, 3, 3, Breaker Capacity (ka rms) ac Hz NEMA, 20 Vac UL, CSA 80 Vac Vac / Vdc IEC 220 Icu Vac Ics Icu Vac Ics Icu Vac Ics / Icu Vdc Ics Ampere Range A 20 A A Trip Units F = Fixed A = Adjustable T = Thermal M = Magnetic Thermal Magnetic Electronic rms Dimensions Inches (mm) FT-FM AT-FM FT-AM AT-AM Electronic (Digitrip RMS 310+) Utilization Category A A A 125 amperes is the maximum UL and CSA rating for the EG. amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA listed rating for the LG. EG breaker rated Y/37 Vac. Two poles in series. Not suitable for dc application. -pole ground fault not available. 125 Vdc only for 1-pole breakers. Current limiting. FT-AM AT-AM Electronic (Digitrip RMS 310+) Interchangeable Built-in Fixed Thermal Adjustable Thermal Magnetic Fixed Adjustable Adjustable LS LSI LSG LSIG H W D H W D H W D 1-Pole (25.) Pole (139.7) 2.00 (50.8) (76.0) Pole 3.00 (76.2) (177.8) (105.0) (87.) (258.0) (10.0) (10.0) Weight (approximate) lbs. (kg) -Pole.00 (101.6) 5.3 (135.6) 7.22 (183.0) 1-Pole 2-Pole 3-Pole -Pole 2-Pole 3-Pole -Pole 3-Pole -Pole 0.85 (0.39) 1.57 (0.71) 2.28 (1.0) 2.85 (1.29) 11.3 (5.13) 5.06 (2.30) T/M 5.31 (2.1) ETU 6.76 (3.07) T/M 7.12 (3.23) ETU (5.61) T/M 13.0 (5.92) ETU (7.39) T/M (7.68) ETU

5 15 0 Amperes for UL, CSA & IEC Applications Frame Sizes NG and RG 5 Table 1. Electrical Characteristics (Continued) Maximum Rated Current NG (Amperes) RG 800, , 2000, 0 Breaker Type S H C S U H C of Poles 2, 3, 3 3 3, Breaker Capacity (ka rms) ac Hz NEMA, 20 Vac UL, CSA 80 Vac Vac IEC Icu Vac Ics Icu Vac Ics Icu Vac Ics Vdc Icu Ics Ampere Range A 1 A 800 A A Trip Units Electronic Electronic (Digitrip RMS 310, 610 and 910) Interchangeable Built-in Electronic LI LS LSI LIG LSG LSIG Dimensions H W D H W D Inches (mm) 1-Pole 2-Pole 3-Pole (06.0) 8.25 (210.0) 5.50 (10.0) (06.0) (39.0) 9.75 (229.0) -Pole (280.0) (508.0) Weight (approximate) lbs. (kg) 3-Pole -Pole 3-Pole -Pole 6.8 (21.3) 62.0 (28.3) (7.0) 118. (5.0) Utilization Category A A The NG and RG MCCB s use metric threading in their line and load terminals. If English (Imperial) threading is needed, use Series C ND and RD MCCB s. Contact Eaton for more information. NG 1 ampere frame is not UL or CSA listed. Not KEMA-KEUR listed. IEC H.5 Annex H is not KEMA-KEUR tested. Not suitable for dc application. -pole ground fault not available. Available only on Digitrip 610 and 910 trip units.

6 Amperes for UL, CSA & IEC Applications Frame Sizes EG through RG Table 2. EG through RG Electrical Characteristics Technical Data EG JG LG NG RG Maximum Rated Current I n Depending on the Version Rated Insulation Voltage U, According to IEC Main Conducting Paths Auxiliary Circuits Rated Impulse Withstand Voltage U imp Main Conducting Paths Auxiliary Circuits Rated Operational Voltage U e IEC NEMA 125 amperes is the maximum UL and CSA rating for the EG. amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA rating for the LG amperes is the maximum UL and CSA rating for the NG. See footnotes for exceptions. Thermal overload release set to the lower value. Thermal overload release set to the upper value. Not suitable for dc application. 160 A A 00, A 800, 1200, 1 A 1, 2000, 0 A 690 Vac 690 Vac 6 kv kv 690 Vac Y/37 Vac 750 Vac 690 Vac 8 kv kv 690 Vac Vac 750 Vac 690 Vac 8 kv kv 690 Vac Vac 750 Vac 690 Vac 8 kv kv 690 Vac Vac 750 Vac 690 Vac 8 kv kv 690 Vac Vac UL and CSA Listed Yes Yes Yes Yes Yes Permissible Ambient Temperature -20 to +70 C -20 to +70 C -20 to +70 C -5 to +60 C -5 to +60 C Permissible Load for Various Ambient Temperatures Close to the Circuit Breaker, Related to the Rated Current of the Circuit Breaker Circuit Breakers for Plant Protection At 0 C At 50 C At 55 C At 60 C At 70 C Circuit Breakers for Motor Protection At 0 C At 50 C At 55 C At 60 C At 70 C Circuit Breakers for Starter Combinations and Isolating Circuit Breakers At 0 C At 50 C At 55 C At 60 C At 70 C Rated Short Circuit Breaking Capacity (dc) Not for Circuit Breakers for Motor Protection (Time Constant = 10 rms) 2 Conducting Paths in Series For EG to LG up to Vdc NEMA (Time Constant = 8 rms) 2 Conducting Paths in Series Vdc Main Switch Characteristics According to IEC in Combination with Lockable Rotary Drives Rated Short Circuit Breaking Capacity According to IEC (at ac 50/60 Hz) % 96% 93% 91% 86% % % 96% 91% 86% % 92% 87% 83% 73% % 96% 9% 92% 88% % % % % 90% % % 96% 82% 88% % 9% 90% 87% 80% % 96% 93% 90% 8% % % % % 90% % % 95% 90% 8% % 91% 86% 82% 70% % 91% 85% 81% % 91% 85% 81% % 91% 85% 81% % 91% 85% 81% 2 ka Max. 2 ka Max. 2 ka Max. 2 ka Max. 2 ka Max. 2 ka Max. Yes Yes Yes Yes Yes Rated Short Circuit Breaking Capacity See Table 1 on Page Endurance (Operating Cycles) 10,000 10,000 8,000 3,000 3,000 Maximum Switching Frequency 300 1/h 20 1/h 20 1/h 60 1/h 20 1/h

7 Amperes for UL, CSA & IEC Applications Frame Sizes EG through RG 7 Table 2. EG through RG Electrical Characteristics (Continued) Technical Data EG JG LG NG RG Conductor Cross Sections and Terminal Types for Main Conductors Solid or Stranded Finely Stranded with End Sleeve Bus Bar Tightening Torque for Box Terminals Tightening Torque for Bus Bar Connection Pieces Conductor Cross Sections for Auxiliary Circuits with Terminal Connection or Terminal Strip Solid Finely Stranded with End Sleeve With Brought-out Cable Ends Tightening Torque for Fitting Screws Power Loss per Circuit Breaker at Maximum Rated Current l n (The Power Losses of the Undervoltage Releases ( r Releases) Must Be Observed if Necessary) at Three-Phase Symmetrical Load) For Plant Protection As Isolating Circuit Breaker For Starter Combinations For Motor Protection Permissible Mounting Position Box Terminals 2.5 to 95 mm to 50/70 mm Nm 5.6 Nm Box Terminals 50 to 150 mm 2 35 to 120 mm 2 20 Nm 15 Nm 0.75 to 2.5 mm to 2.5 mm to 2.5 mm to 2.5 mm (AWG 18) mm to 1. Nm 0 W 0 W 0 W 5 W 5 W 5 W 5 W Box Terminals 95 to 20 mm 2 70 to 150 mm 2 2 Nm 30 Nm 0.75 to 2.5 mm to 2.5 mm (AWG 18) mm to 1. Nm 00 A: 65 W 65 W 65 W 65 W Flat Bar Terminals A 31 Nm 6 Nm A: 120 W 120 W 120 W 120 W Flat Bar Terminals Optional 31 Nm 50 Nm Up to 2x mm 2 Up to 2x2.5 mm (AWG 18) mm to 1. Nm 87/210 W 87/210 W Flat Bar Terminals Optional 20 Nm Up to 2x mm 2 Up to 2x2.5 mm (AWG 18) mm to 1. Nm 220/270/00 W 220/270/00 W Arc Spacing Suitable for Reverse-Feed Applications Yes (Except HMCPE) Yes Yes Yes Yes

8 Amperes for UL, CSA & IEC Applications Frame Sizes EG through RG Table 2. EG through RG Electrical Characteristics (Continued) Technical Data EG JG LG NG RG Auxiliary Switches Rated Thermal Current l th Rated Making Capacity ac (ac-15) Rated Operational Voltage Rated Operational Current dc (dc-13) Rated Operational Voltage Rated Operational Current Backup Fuse Miniature Circuit Breaker 6 A 20 A 230/00/ V 6/3/0.25 A 125/ V 0.5/0.25 A 6// A 6/ A Releases Undervoltage Releases ( r Releases) Response Voltage: Drop (Breaker Tripped) U s 35 70% Pickup (Breaker May Be Switched on) U s % Power Consumption in Continuous Operation at: 50/60 Hz 12 Vac 50/60 Hz 2 Vac 50/60 Hz 8 60 Vac 50/60 Hz Vac 50/60 Hz Vac 50/60 Hz Vac 50/60 Hz 525 Vac 12 Vdc 2 Vdc 8 60 Vdc Vdc 220 Vdc Maximum Opening Time Shunt Trips 0.95 VA 0.72 VA VA VA VA VA 3..3 VA 0.88 W 0.70 W W W W 50 ms 6 A 20 A 230/00/ V 6/3/0.25 A 125/ V 0.5/0.15 A 6// A 6/ A 35 70% % 1.9 VA 3.9 VA VA VA VA VA 3..3 VA 1.6 W 3.1 W W W 3.1 W 50 ms 6 A 20 A 230/00/ V 6/3/0.25 A 125/ V 0.5/0.15 A 6// A 6/ A 35 70% % 1.9 VA 3.9 VA VA VA VA VA 3..3 VA 1.6 W 3.1 W W W 3.1 W 50 ms 6 A 20 A V 6 A 125/ V 0.5/0.25 A 6// A 6/ A 35 70% % 1.9 VA 2. VA VA 3..2 VA VA VA 2.6 W 3.6 W W W W 62 ms 6 A 20 A V 6 A 125/ V 0.5/0.25 A 6// A 6/ A 35 70% % 2.9 VA 3.1 VA VA VA VA VA 3. W.3 W W W W 62 ms Shunt Trips ( f Releases) Response Voltage: Pickup (Breaker Tripped) U s % % % % % Power Consumption in (Short Time) at: 50/60 Hz 2 Vac 50/60 Hz 8 60 Vac 50/60 Hz Vac 50/60 Hz Vac 50/60 Hz Vac 50/60 Hz 380 Vac 50/60 Hz 80 Vac 12 2 Vdc 8 60 Vdc Vdc 220 Vdc Maximum Load Duration 10 1 VA VA VA VA W W W VA VA VA VA 3 60 VA W W W 0 58 W VA VA VA VA 3 60 VA W W W 0 58 W VA 2 50 VA VA VA 19 2 VA W W W 6 55 W Interrupts Automatically Maximum Opening Time 50 ms 50 ms 50 ms 62 ms 62 ms Moulded Case Switch (with High Magnetic Trip) Unfused kaic at: Vac 25 (Y/37) VA VA VA VA VA 396 W W W W Vac 15 Vac 20 Vac Vac (125/) Self-Protected, Will Trip Above: 1 for EG125; 1 for EG /0 12,500 20,000

9 15 0 Amperes for UL, CSA & IEC Applications Frame Sizes EG through LG 9 DC Switching Duty The EG- to LG-Frame circuit breakers are also suitable for switching dc currents. The NG- and RG-Frame circuit breakers are not suitable for dc currents due to the solid-state overcurrent release system. For switching dc currents, however, the maximum permissible dc voltage per conducting path has to be considered. For voltages higher than volts, the series connection of two or three conducting paths is required. As the current has to flow through all conducting paths so as to maintain the thermal tripping characteristics, the following circuit arrangements are recommended. With dc, the trip values of the instantaneous short circuit release ( n release) are increased by 30 to 0%. Table 3. For 3- and -Pole Circuit Breakers Proposed Circuit NSI-5178a NSI-5179a NSI-5180 NSI-5181 M M M M Maximum Permissible Vdc Ue Remarks Vdc Double-pole switching. If there is no risk of an earth fault, or if any earth fault which occurs is immediately eliminated (earth fault monitoring), the maximum permissible dc voltage can be volts. 0 Vdc Double-pole switching (earth system). The earthed pole must always be assigned to the individual conducting path, so that two paths are always in series in the event of an earth fault. Vdc Single-pole switching (earthed system). Three conducting paths in series. The earthed pole must be assigned to the nonswitched conducting path. 750 Vdc Single-pole switching (earthed system). Four conducting paths in series. The earthed pole must be assigned to the nonswitched conducting path.

10 Amperes for UL, CSA & IEC Applications Series G Electronic Trip Units Multi-Function Electronic Trip Units for All Applications Digitrip RMS Trip Units True rms Sensing Digitrip RMS Trip Units utilize our patented microprocessor-based intelligence to provide true rms sensing, permitting increased accuracy and reliable system protection. True rms sensing is not susceptible to nuisance tripping when waveforms containing high harmonic currents are present. Digitrip RMS 310 Digitrip RMS 310 Electronic Trip Units are available with Cutler-Hammer Circuit Breakers K-, L-, M-, N- and R- Frames 20 through 0 amperes. Digitrip RMS 310+ Digitrip RMS 310+ Electronic Trip Units are available with Cutler-Hammer Circuit Breakers F-, JG and LG. They are selectable long time delay (t LD ) and pickup settings (I r ). A rating plug is not required. The Digitrip 310+ offers true rms sensing, is front adjustable and has an optional local display of current and cause of trip. Rating Plugs If rating plugs are needed for K-, L-, M-, N- and R-Frame, they are marked for 50/60 Hz applications. Both fixed and adjustable rating plugs are available, providing further flexibility when applied to selectively coordinated systems. Curve Shaping When selectively coordinated systems are called for, Digitrip RMS 310 will provide a cost-effective solution for a variety of applications. The standard Digitrip RMS 310 includes an adjustable short time pickup setting encompassing an I 2 t ramp function which provides the basic LS curve shaping function. JG- and LG-Frames have an adjustable long time delay. JG- and LG-Frames have selectable long time delay (t LD ) and pickup settings (I r ). A rating plug is not required. The optional Digitrip RMS 310 provides additional flat response short time delay adjustments on an instantaneous setting to provide LSI curve shaping capability. Digitrip RMS 310 Trip Units are available with ground fault pickup and flat response ground fault delay which provides the trip unit with full function LSG and LSIG curve shaping flexibility. Digitrip RMS 310 Trip Units can effectively coordinate with both sophisticated upstream power breakers as well as downstream thermal magnetic breakers making Digitrip RMS 310 Trip Units the cost-effective reliable choice for selectively coordinated systems. Thermal Memory All Digitrip RMS Trip Units incorporate a long delay. Thermal memory prevents the system from cumulative overheating due to repeated overcurrent events that may occur in quick succession. Field Testing A field test kit is available for Digitrip RMS 310 trip units. A plug-in test kit is also available for Digitrip RMS 310+ trip units. Digitrip RMS 610 and 910 RMS 610 RMS 910 Digitrip RMS 610 and 910 Trip Units are available with Cutler-Hammer R-Frame Circuit Breakers 800 through 0 amperes. Digitrip 610 and 910 Trip Units provide unparalleled system protection with the added convenience of a local display. Curve Shaping Digitrip RMS 610 and 910 Trip Units are available with up to nine curve shaping choices achieved by adjusting up to seven switches on the front of the unit for optimum system coordination. Maximum curve shaping flexibility is provided by dependent long and short delay adjustments that are long delay pickup (I r ) based, depicted on the front of the unit by the blue portion of the time-current curve. Additional coordination capability can be provided by utilizing the short delay and ground fault zone selective interlocking features available on these trip units.

11 15 0 Amperes for UL, CSA & IEC Applications Series G Electronic Trip Units 11 System Diagnostics Digitrip RMS 610 and 910 models of trip units provide long delay, short delay, instantaneous, and ground fault cause of trip LEDs on the front of the unit. Their display shows a magnitude of trip information, as well as remote signal contacts, for improved system alarming. System Monitoring Digitrip 610 and 910 Trip Units have the capability to monitor phase currents, as well as neutral or ground currents. This information is displayed on a large digital display mounted on the unit. Digitrip RMS 910 Trip Units can also provide the user with power and energy monitoring capability. Peak power demand, present power demand, and total energy, as well as forward and reverse energy can be monitored with this unit. Digitrip RMS 910 Trip Units have the additional capability of monitoring line-to-line voltage, as well as system power factor. Both parameters are displayed in the digital display window and are supported by LEDs to indicate which parameter is being displayed. Harmonics Monitoring Digitrip RMS 910 Trip Units are capable of displaying values of current harmonics in the digital display window. Percentage of harmonic content can be monitored for each phase, up to the 27th harmonic. Additionally, a total harmonic distortion value can be calculated and displayed. Communications Digitrip RMS 910 units have built-in communications options to allow all protection, monitoring, and control information to be transmitted back to a central location via the Cutler-Hammer PowerNet system. Field Testing Integral field testing capability is provided on all 610 and 910 Trip Units. No additional test set is needed to perform both trip and no trip field testing.

12 Amperes for UL, CSA & IEC Applications Series G Electronic Trip Units Digitrip RMS Electronic Trip Unit Selection Guide Table. Digitrip RMS Electronic Trip Unit Selection Guide Digitrip RMS 310 RMS 610 RMS 910 JG LG RG RG RG Breaker Type Cutler-Hammer Frame(s) JG-, LG-, NG- and RG-Frames RG-Frame RG-Frame Ampere Rating 20 0 A A A Interrupting Rating at V 18, 25, 35, 50, 65 ka 50, 65 ka 50, 65 ka Trip Unit Sensing rms Sensing Yes Yes Yes Protection and Coordination Protection Ordering Options LS, LSG LSI, LSIG LI, LS, LSI, LIG, LSG, LSIG LI, LS, LSI, LIG, LSG, LSIG Fixed Rating Plug (I n ) Yes Yes Yes Yes Overtemperature Trip Yes Yes Yes Yes Long Delay Adjustable Rating Plug (l n ) Yes Yes No No Long Delay Setting (l n ) (l n ) x (l n ) x (l n ) Long Delay Time I 2 t at 6x 12 Seconds 12 Seconds 2 2 Seconds 2 2 Seconds Long Delay Thermal Memory Yes Yes Yes Yes High Load Alarm No No 0.85 x I r 0.85 x I r Short Delay Short Delay Setting Var/Frame Var/Frame 200 % S1 & S2 x (I r ) 200 % S1 & S2 x (I r ) Short Delay Time I 2 t ms No, 300, 500 ms, 300, 500 ms Short Delay Time Flat No I 300 ms 500 ms 500 ms Short Delay Time ZSI No No Yes Yes Instantaneous Instantaneous Setting No Var/Frame 200 % M1 & M2 x (l n ) 200 % M1 & M2 x (l n ) Discriminator No No Yes Yes Instantaneous Override Yes Yes Yes Yes Ground Fault Ground Fault Setting Var/Frame Var/Frame 25 % x (l n ) 25 % x (l n ) Ground Fault Delay I 2 t at.62x No No, 300, 500 ms, 300, 500 ms Ground Fault Delay Flat I 500 ms I 500 ms 500 ms 500 ms Ground Fault ZSI No No Yes Yes Ground Fault Thermal Memory No No Yes Yes System Diagnostics Cause of Trip LEDs No No Yes Yes Magnitude of Trip Information No No Yes Yes Remote Signal Contacts No No Yes Yes System Monitoring Digital Display No No Yes Yes Current No No Yes Yes Voltage No No No Yes Power and Energy No No No Yes Power Quality Harmonics No No No Yes Power Factor No No No Yes System Communications PowerNet No No No Yes Field Testing Testing Method Test Set Test Set Integral Integral JG- and LG-Frames have selectable I r settings instead of a rating plug. JG-, LG- and NG-Frames have adjustable long delay times of 2 2 seconds. JG: 2-8, 10, 1X (I r ), LG: 2-8, 10, 12X (I r ); NG: 2X 8X (I n ); 1/2000 ampere RG- Frame: 2X 8X (I n ); 0 ampere RG-Frame: 2X - 6X (I n ). Occurs with Short Delay Time adjustment set at I. Same setting as shown in Note 3. JG-Frame also has a 1 I i setting and LG- Frame also has a 12 I i setting. LS, LSG only. Not to exceed 1200 amperes. JG- and LG-Frames are Instantaneous, 120 ms and 300 ms. NG- and RG-Frames are Instantaneous, 150, 300 and 500 ms. Note: I n = Rating plug rating. I r = Long delay setting.

13 EG-Frame Eaton s Cutler-Hammer EG Product Description EG breaker is HACR rated Amperes EG-Frame Technical Data and Specifications Table 5. CSA C22.2 No. 5 / UL 89/IEC Interrupting Capacity Ratings Circuit Breaker Type of Poles EGB , 3, dc ratings apply to substantially non-inductive circuits. IEC only. 2-pole circuit breaker, or two poles of 3-pole circuit breaker. Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at 2 ka. Current limiting. Dimensions/Weights Interrupting Capacity (Symmetrical Amperes) (ka) Volts ac (50/60 Hz) Volts dc Y/ I 37 cu I cs I cu I cs I cu I cs I cu I cs I cu I cs EGE125 2, 3, EGS , 3, EGH , 3, EGC125 3, Table 6. Dimensions in Inches (mm) Width Height Depth of Poles (25.) 2.00 (50.8) 3.00 (76.2).00 (101.6) 5.50 (139.7) 5.50 (139.7) 5.50 (139.7) 5.50 (139.7) 2.99 (75.9) 2.99 (75.9) 2.99 (75.9) 2.99 (75.9) Table 7. Approximate Shipping Weight in Lbs. (kg) Breaker of Poles Type EGB125, EGE125, EGS125, EGH125, EGC (.68) 2.0 (.91) 3.0 (1.36).9 (1.82)

14 Amperes EG-Frame Product Selection Table 8. Main ing System E G H FF G Frame Poles Amperes Terminations/Hardware E Standard/Application G = IEC/CE/UL/CSA Performance Y/ B E S H C K Moulded Case Switch 1 = One 2 = Two 3 = Three = Four Neutral 0% Protected 7 = Four Neutral % Protected Terminals M = Metric End Caps E = Imperial End Caps G = Line/Load Standard Mounting Hardware Metric Imperial Metric Trip Unit FF = Fixed Thermal Fixed Magnetic AF = Adj. Thermal Fixed Magnetic KS = Moulded Case Switch Cannot be CSA/UL rated. Available only as 125 and 160 A sizes. 160 amperes is not a UL or CSA listed rating. 125 amperes is the maximum UL and CSA rating for the EG.

15 Amperes EG-Frame 15 Product Selection Table 9. Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC Rating at 15/80/(Y/37) Volts Max. 1-Pole 2-Pole 3-Pole -Pole 0% Protected Neutral Cont. Fixed Fixed Fixed Adjustable Amps Fixed Adjustable Thermal Thermal Thermal Thermal Thermal Thermal at 0 C Fixed Fixed Fixed Fixed Fixed Fixed Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic 18/18/ /25/ /35/ EGB1015FFG EGB1016FFG EGB1020FFG EGB1025FFG EGB1030FFG EGB1032FFG EGB1035FFG EGBFFG EGB105FFG EGB1050FFG EGB1060FFG EGB1063FFG EGB1070FFG EGB1080FFG EGB1090FFG EGB1FFG EGB1125FFG EGS1015FFG EGS1016FFG EGS1020FFG EGS1025FFG EGS1030FFG EGS1032FFG EGS1035FFG EGSFFG EGS105FFG EGS1050FFG EGS1060FFG EGS1063FFG EGS1070FFG EGS1080FFG EGS1090FFG EGS1FFG EGS1125FFG EGB2015FFG EGB2016FFG EGB2020FFG EGB2025FFG EGB2030FFG EGB2032FFG EGB2035FFG EGB200FFG EGB205FFG EGB2050FFG EGB2060FFG EGB2063FFG EGB2070FFG EGB2080FFG EGB2090FFG EGB2FFG EGB2125FFG EGE2015FFG EGE2016FFG EGE2020FFG EGE2025FFG EGE2030FFG EGE2032FFG EGE2035FFG EGE200FFG EGE205FFG EGE2050FFG EGE2060FFG EGE2063FFG EGE2070FFG EGE2080FFG EGE2090FFG EGE2FFG EGE2125FFG EGS2015FFG EGS2016FFG EGS2020FFG EGS2025FFG EGS2030FFG EGS2032FFG EGS2035FFG EGS200FFG EGS205FFG EGS2050FFG EGS2060FFG EGS2063FFG EGS2070FFG EGS2080FFG EGS2090FFG EGS2FFG EGS2125FFG EGB3015FFG EGB3016FFG EGB3020FFG EGB3025FFG EGB3030FFG EGB3032FFG EGB3035FFG EGB300FFG EGB305FFG EGB3050FFG EGB3060FFG EGB3063FFG EGB3070FFG EGB3080FFG EGB3090FFG EGB3FFG EGB3125FFG EGE3015FFG EGE3016FFG EGE3020FFG EGE3025FFG EGE3030FFG EGE3032FFG EGE3035FFG EGE300FFG EGE305FFG EGE3050FFG EGE3060FFG EGE3063FFG EGE3070FFG EGE3080FFG EGE3090FFG EGE3FFG EGE3125FFG EGS3015FFG EGS3016FFG EGS3020FFG EGS3025FFG EGS3030FFG EGS3032FFG EGS3035FFG EGS300FFG EGS305FFG EGS3050FFG EGS3060FFG EGS3063FFG EGS3070FFG EGS3080FFG EGS3090FFG EGS3FFG EGS3125FFG 16, 32, 63 A are not CSA/UL listed ratings. Adjustable thermal are not CSA/UL listed. Change the fourth digit to 7 for % neutral protection. Neutral is on the LH side. EGB3025AFG EGB3032AFG EGB300AFG EGB3050AFG EGB3063AFG EGB3080AFG EGB3AFG EGB3125AFG EGE3025AFG EGE3032AFG EGE300AFG EGE3050AFG EGE3063AFG EGE3080AFG EGE3AFG EGE3125AFG EGS3025AFG EGS3032AFG EGS300AFG EGS3050AFG EGS3063AFG EGS3080AFG EGS3AFG EGS3125AFG EGB015FFG EGB016FFG EGB020FFG EGB025FFG EGB030FFG EGB032FFG EGB035FFG EGB00FFG EGB05FFG EGB050FFG EGB060FFG EGB063FFG EGB070FFG EGB080FFG EGB090FFG EGBFFG EGB125FFG EGE015FFG EGE016FFG EGE020FFG EGE025FFG EGE030FFG EGE032FFG EGE035FFG EGE00FFG EGE05FFG EGE050FFG EGE060FFG EGE063FFG EGE070FFG EGE080FFG EGE090FFG EGEFFG EGE125FFG EGS015FFG EGS016FFG EGS020FFG EGS025FFG EGS030FFG EGS032FFG EGS035FFG EGS00FFG EGS05FFG EGS7050FFG EGS7060FFG EGS7063FFG EGS7070FFG EGS7080FFG EGS7090FFG EGS7FFG EGS7125FFG EGB020AFG EGB025AFG EGB032AFG EGB00AFG EGB050AFG EGB063AFG EGB080AFG EGBAFG EGB125AFG EGE020AFG EGE025AFG EGE032AFG EGE00AFG EGE050AFG EGE063AFG EGE080AFG EGEAFG EGE125AFG EGS020AFG EGS025AFG EGS032AFG EGS00AFG EGS050AFG EGS063AFG EGS080AFG EGSAFG EGS125AFG

16 Amperes EG-Frame Table 9. Complete Breaker (Includes Frame, Trip Unit, Standard Terminals & Mounting Hardware) IC Rating at 15/80/(Y/37) Volts (Cont d) Max. 1-Pole 2-Pole 3-Pole -Pole 0% Protected Neutral Cont. Fixed Fixed Fixed Adjustable Amps at Fixed Adjustable Thermal Thermal Thermal Thermal Thermal Thermal 0 C Fixed Fixed Fixed Fixed Fixed Fixed Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic 70/65/ // EGH1015FFG EGH1016FFG EGH1020FFG EGH1025FFG EGH1030FFG EGH1032FFG EGH1035FFG EGHFFG EGH105FFG EGH1050FFG EGH1060FFG EGH1063FFG EGH1070FFG EGH1080FFG EGH1090FFG EGH1FFG EGH1125FFG 16, 32, 63 A are not CSA/UL listed ratings. Adjustable thermal is not CSA/UL listed. Change the fourth digit to 7 for % neutral protection. Neutral is on LH side. Table 10. Moulded Case Switches EGK2125KSG EGK3125KSG EGK125KSG EGK7125KSG EGH2015FFG EGH2016FFG EGH2020FFG EGH2025FFG EGH2030FFG EGH2032FFG EGH2035FFG EGH200FFG EGH205FFG EGH2050FFG EGH2060FFG EGH2063FFG EGH2070FFG EGH2080FFG EGH2090FFG EGH2FFG EGH2125FFG Note: Moulded case switches may open above 1 A. EGH3015FFG EGH3016FFG EGH3020FFG EGH3025FFG EGH3030FFG EGH3032FFG EGH3035FFG EGH300FFG EGH305FFG EGH3050FFG EGH3060FFG EGH3063FFG EGH3070FFG EGH3080FFG EGH3090FFG EGH3FFG EGH3125FFG EGC3015FFG EGC3016FFG EGC3020FFG EGC3025FFG EGC3030FFG EGC3032FFG EGC3035FFG EGC300FFG EGC305FFG EGC3050FFG EGC3060FFG EGC3063FFG EGC3070FFG EGC3080FFG EGC3090FFG EGC3FFG EGC3125FFG EGH3020AFG EGH3025AFG EGH3032AFG EGH300AFG EGH3050AFG EGH3063AFG EGH3080AFG EGH3AFG EGH3125AFG EGC3020AFG EGC3025AFG EGC3032AFG EGC300AFG EGC3050AFG EGC3063AFG EGC3080AFG EGC3AFG EGC3125AFG EGH015FFG EGH016FFG EGH020FFG EGH025FFG EGH030FFG EGH032FFG EGH035FFG EGH00FFG EGH05FFG EGH050FFG EGH060FFG EGH063FFG EGH070FFG EGH080FFG EGH090FFG EGHFFG EGH125FFG EGC7015FFG EGC7016FFG EGC7020FFG EGC7025FFG EGC7030FFG EGC7032FFG EGC7035FFG EGC700FFG EGC705FFG EGC7050FFG EGC7060FFG EGC7063FFG EGC7070FFG EGC7080FFG EGC7090FFG EGC7FFG EGC7125FFG EGH020AFG EGH025AFG EGH032AFG EGH00AFG EGH050AFG EGH063AFG EGH080AFG EGHAFG EGH125AFG EGC7020AFG EGC7025AFG EGC7032AFG EGC700AFG EGC7050AFG EGC7063AFG EGC7080AFG EGC7AFG EGC7125AFG

17 Amperes EG-Frame 17 Selection Guide and Ordering Information 3T125EF 3TA125EF 3TA150EF 3TA160EFK Endcap Kit EF3RTWK, 3-Pole Metric EFRTWK, -Pole Metric EF3RTDK, 3-Pole Imperial EFRTDK, -Pole Imperial Control Wire Terminal Kit GCWTK Multiwire Connectors Line and Load Terminals EG-Frame circuit breakers and moulded case switches have line and load terminals as standard equipment. Table 11. Line and Load Terminals Max. Breaker Amps Terminal Body Material Wire Type Metric Wire Range mm 2 Standard line and load terminals. AWG Wire Range Package of 3 Terminals Standard Cu/Al Pressure Type Terminals 125 Steel Cu #1-3/0 3T125EF Aluminum Aluminum Aluminum Aluminum Cu/Al Cu/Al Cu/Al Cu/Al #1-1/0 #6-3/0 #3- #3-3TA125EF 3TA150EF 3TA160EFK TA160EFK Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: Collar must surround conductor. Insert collar enclosing conductor and center on extrusion. Tighten securely with screw and washer. Endcap kits are used on the E-Frame breaker line side to connect bus bar or similar electrical connections. Includes hardware. Control Wire Terminal Kit For use with steel or stainless steel standard line and load terminals only. Table 12. Control Wire Terminal Kit Package of 12 Priced Individually Control Wire Terminal Kit Interphase Barriers The interphase barrier is available for extended insulation between circuit breaker poles. Specify quantity when ordering. Table 13. Interphase Barriers Package of 2 Priced Individually Interphase Barriers 5652B38G01 EIPBK Base Mounting Hardware Metric base mounting hardware is included with a circuit breaker or moulded case switch. (Included with breaker.) Table 1. DIN Rail Mounting DIN Rail Adapter 3- or -Pole EF3DIN Multiwire Connectors Field-installed multiwire connectors for the load side (OFF) end terminals. They are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks. Multiwire lug kits include mounting hardware, terminal shield insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed for copper only as used on the load side (OFF) end. Table 15. EG-Frame Multiwire Connectors Ordering Information (Package of 3) Max. Amps Wires per Terminal Wire Size Range AWG Cu Kit Terminal Shields The terminal shield is available for line terminal areas in 3- and -pole circuit breakers. Special terminal shields are also available for use when an electrical (solenoid) operator is mounted on the circuit breaker. The standard style number by pole for each terminal shield is for a package of 10 and is priced per each package. Special terminal shields are packaged individually. Table 16. Terminal Shields IP30 Protection of Poles s EFTS3K EFTSK TA125E3K 3TA125E6K Terminal End Covers (Gas Barrier) The terminal end cover is available for 3-pole circuit breakers only. Two conductor opening sizes are available. Specify quantity (one per circuit breaker) when ordering. Table 17. Terminal End Covers Conductor Opening Diameter Inches (mm) 6.35 (0.25) 10.1 (0.1) EEC3K EECK Note: English mounting hardware kit can be supplied separate. number is BMHE #6 32 x 3 inches.

18 Amperes EG-Frame Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Table 18. Accessories Description Reference 1-Pole 2-Pole 3-Pole -Pole Page Center Left Right Left Center Right Neutral Left Center Right Internal Accessories (Only one internal accessory per pole) Alarm Lockout (Make/Break) 58 Alarm Lockout (2Make/2Break) 58 Auxiliary Switch (1A, 1B) 58 Auxiliary Switch (2A, 2B) 58 Auxiliary Switch and Alarm Switch Combination 58 Shunt Trip Standard 58 Undervoltage Release Mechanism 58 External Accessories End Cap Kit 17 Control Wire Terminal Kit 17 Multiwire Connectors 17 Base Mounting Hardware 17 Terminal Shields 17 Terminal End Covers 17 Interphase Barriers 17 Non-Padlockable Handle Block 56 Snap-On Padlockable Handle Lock Hasp 56 Padlockable Handle Lock Hasp 56 Walking Beam Interlock Requires Two Breakers 56 Plug-in Adapters 59 Electrical Operator 56 Handle Mechanisms 60 Modifications (Refer to Eaton) Moisture Fungus Treatment Freeze-Tested Circuit Breakers Marine Application Applicable in indicated pole position May be mounted on left or right pole Accessory available/modification available not both

19 JG-Frame Eaton s Cutler-Hammer J 63 Amperes JG-Frame Technical Data and Specifications Table 19. CSA C22.2 No. 5 / UL 89/IEC Interrupting Capacity Ratings Circuit Interrupting Capacity (ka Symmetrical Amperes) Breaker of Poles Volts ac (50/60 Hz) Volts dc Type I cu I cs I cu I cs I cu I cs JGE 2, 3, JGS 2, 3, JGH 2, 3, JGC 3, JGU 3, JGX 3, dc ratings apply to substantially non-inductive circuits. 2-pole circuit breaker, or two poles of 3-pole circuit breaker. Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at 22 ka. Current limiting. 19 Product Description JG breaker is HACR rated. Dimensions/Weights Table 20. Dimensions in Inches (mm) Width Height Depth of Poles 2/3.13 (10.9) 7.00 (177.8) 3.57 (90.7) 5.3 (135.6) 7.00 (177.8) 3.57 (90.7) Table 21. Approximate Shipping Weight in Lbs. (kg) Breaker of Poles Type 2/3 JGE, JGS, JGH, JGC, JGU, JGX 6 (2.7) 8 (3.6)

20 20 63 Amperes JG-Frame Product Selection Table 22. Main ing System J G S 3 25O FA G C Frame Poles Amperes Trip Unit J Standard/Application G = IEC/CE/UL/CSA 2 = Two 3 = Three = Four Neutral 0% Protected 8 = Four Neutral 0 60% Protected 9 = Four Neutral 0 Protected Performance E S H C U AA = Adj. Thermal Adj. Magnetic FA = Fixed Thermal Adj. Magnetic KS = Moulded Case Switch 33 = 310+ Electronic LS 32 = 310+ Electronic LSI 35 = 310+ Electronic LSG 36 = 310+ Electronic LSIG NN = Frame Only (No Trip) Terminations/Hardware Terminals Mounting Hardware M = Metric End Caps E = Imperial End Caps G = Line/Load Standard Metric Imperial Metric X K Moulded Case Switch Rating Blank = 80% Rated C = % Rated Table 23. Trip Unit ing System JT FA Trip Poles Amperes Trip Unit JT 2 = Two 3 = Three = Four Neutral 0% Protected 8 = Four Neutral 0/60% Protected 9 = Four Neutral 0/% Protected T/M ETU AA = Adj. Thermal Adj. Magnetic FA = Fixed Thermal Adj. Magnetic KS = Moulded Case Switch 33 = 310+ Electronic LS 32 = 310+ Electronic LSI 35 = 310+ Electronic LSG 36 = 310+ Electronic LSIG

21 63 Amperes JG-Frame 21 Product Selection Table 2. Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC Rating at 15/80/ Volts Maximum Magnetic 2-Pole 3-Pole -Pole 0% Continuous Range Fixed Thermal Fixed Thermal Adjustable Thermal Fixed Thermal Adjustable Thermal Amperes Adjustable Magnetic Adjustable Magnetic Adjustable Magnetic Adjustable Magnetic Adjustable Magnetic IEC/CE/UL/CSA 25/25/ IEC/CE/UL/CSA 0/35/ IEC/CE/UL/CSA 70/65/ IEC/CE/UL/CSA // IEC/CE/UL/CSA 150/150/ IEC/CE/UL/CSA 200/200/ JGE2070FAG JGE2090FAG JGE2FAG JGE2125FAG JGE2150FAG JGE2175FAG JGE2200FAG JGE2225FAG JGE2FAG JGS2070FAG JGS2090FAG JGS2FAG JGS2125FAG JGS2150FAG JGS2175FAG JGS2200FAG JGS2225FAG JGS2FAG JGH2070FAG JGH2090FAG JGH2FAG JGH2125FAG JGH2150FAG JGH2175FAG JGH2200FAG JGH2225FAG JGH2FAG JGE3070FAG JGE3090FAG JGE3FAG JGE3125FAG JGE3150FAG JGE3175FAG JGE3200FAG JGE3225FAG JGE3FAG JGS3070FAG JGS3090FAG JGS3FAG JGS3125FAG JGS3150FAG JGS3175FAG JGS3200FAG JGS3225FAG JGS3FAG JGH3070FAG JGH3090FAG JGH3FAG JGH3125FAG JGH3150FAG JGH3175FAG JGH3200FAG JGH3225FAG JGC3070FAG JGC3090FAG JGC3FAG JGC3125FAG JGC3150FAG JGC3175FAG JGC3200FAG JGC3225FAG JGC3FAG JGU3070FAG JGU3090FAG JGU3FAG JGU3125FAG JGU3150FAG JGU3175FAG JGU3200FAG JGU3225FAG JGU3FAG JGX3070FAG JGX3090FAG JGX3FAG JGX3125FAG JGX3150FAG JGX3175FAG JGX3200FAG JGX3225FAG JGX3FAG JGE3AAG JGE3125AAG JGE3160AAG JGE3200AAG JGE3AAG JGS3AAG JGS3125AAG JGS3160AAG JGS3200AAG JGS3AAG JGH3AAG JGH3125AAG JGH3160AAG JGH3200AAG JGH3AAG JGC3080AAG JGC3AAG JGC3125AAG JGC3160AAG JGC3200AAG JGC3AAG JGU3080AAG JGU3AAG JGU3125AAG JGU3160AAG JGU3200AAG JGU3AAG JGX3080AAG JGX3AAG JGX3125AAG JGX3160AAG JGX3200AAG JGX3AAG JGE070FAG JGE090FAG JGEFAG JGE125FAG JGE150FAG JGE175FAG JGE200FAG JGE225FAG JGEFAG JGS070FAG JGS090FAG JGSFAG JGS125FAG JGS150FAG JGS175FAG JGS200FAG JGS225FAG JGSFAG JGH070FAG JGH090FAG JGHFAG JGH125FAG JGH150FAG JGH175FAG JGH200FAG JGH225FAG JGHFAG JGC070FAG JGC090FAG JGCFAG JGC125FAG JGC150FAG JGC175FAG JGC200FAG JGC225FAG JGCFAG JGU070FAG JGU090FAG JGUFAG JGU125FAG JGU150FAG JGU175FAG JGU200FAG JGU225FAG JGUFAG JGX070FAG JGX090FAG JGXFAG JGX125FAG JGX150FAG JGX175FAG JGX200FAG JGX225FAG JGXFAG Change the fourth digit to 8 for adjustable 0 60% neutral protection, 9 for 0 % neutral protection. Neutral is on LH side. IEC-EN only. Adjustment is.8 and 1.0. Not CSA or UL listed. JGEAAG JGE125AAG JGE160AAG JGE200AAG JGEAAG JGSAAG JGS125AAG JGS160AAG JGS200AAG JGSAAG JGHAAG JGH125AAG JGH160AAG JGH200AAG JGHAAG JGC080AAG JGCAAG JGC125AAG JGC160AAG JGC200AAG JGCAAG JGU080AAG JGUAAG JGU125AAG JGU160AAG JGU200AAG JGUAAG JGX080AAG JGXAAG JGX125AAG JGX160AAG JGX200AAG JGXAAG

22 22 63 Amperes JG-Frame Product Selection Table 25. Thermal-Magnetic Trip Unit Ampere Rating Magnetic Trip Range Range JT2070FA JT2090FA JT2FA JT2125FA JT2150FA JT2175FA JT2200FA JT2225FA JT2FA JT3070FA JT3090FA JT3FA JT3125FA JT3150FA JT3175FA JT3200FA JT3225FA JT3FA JT3080AA JT3AA JT3125AA JT3160AA JT3200AA JT3AA Adjustable thermal trip units are typically used in IEC markets and are not UL or CSA listed JT070FA JT090FA JTFA JT125FA JT150FA JT175FA JT200FA JT225FA JTFA JT080AA JTAA JT125AA JT160AA JT200AA JTAA Table 26. Moulded Case Switches JGK2KSK JGK3KSG JGK7KSG Note: Moulded case switches will trip above 0 amperes. Table 27. Components Line and Load Terminal Maximum Breaker Amperes Terminal Body Material Wire Type Standard line and load terminals. AWG Wire Range No. Conductors Metric Wire Range mm 2 Standard Cu/AI Pressure Terminals Aluminum Cu/Al 350 kcmil TAFJ Stainless Steel Cu 350 kcmil TFJ

23 63 Amperes JG-Frame 23 Product Selection Table 28. Components Frame IC Rating at 15/80/ Volts Maximum 2-Pole 3-Pole -Pole 0% Amperes Components % rated frame. To be used with electronic trip units only. Table 29. Plug-in Test Kit Table 31. JG Electronic Trip Units 25/25/18 JGE2NN JGE3NN JGENN 0/35/18 JGS2NN JGS3NN JGSNN 70/65/25 JGH2NN JGH3NN JGHNN //35 JGC3NN JGCNN 150/150/50 JGU3NN JGUNN 200/200/50 JGX3NN JGXNN 25/25/18 JGE3NNWC 0/35/18 JGS3NNWC 70/65/25 JGH3NNWC JGHNNWC Voltage Rating 120 Vac 230 Vac Ampere Rating 3-Pole Pole MTST120V MTST230V Table 30. Breaker Mount Ammeter Description Breaker Mount Ammeter DIGIVIEW Note: Use on electronic trip only. LS LSI LSG LSIG Neutral CT for LSG & LSIG JT JT333 JT JT333 JT05033 JT33 JT16033 JT33 JT JT332 JT JT332 JT05032 JT32 JT16032 JT32 JT JT335 JT JT335 JT05035 JT35 JT16035 JT35 JT JT336 JT JT336 JT05036 JT36 JT16036 JT36 JGFCT050 JGFCT JGFCT160 JGFCT JGFCT050 JGFCT JGFCT160 JGFCT Required for -wire systems if neutral protection is desired. Neutral protection = 0%, 6 = 60%, 7 = % electronic trip unit neutral protection is not adjustable. Note: Long time pickup no rating plug. Ampere Settings, 225, 200, 175, 160, 150, 125,. 160 Ampere Settings 160, 150, 125, 110,, 90, 80, 63. Ampere Settings, 90, 80, 70, 63, 50, 5, Ampere Settings 50, 5, 0, 32, 30, 25, 20. Note: Adjustable long time delay 2 2 seconds at 6 x lr. Adjustable short time delay Inst., 120, 300 ms Digitrip 310+ Test Kit Digitrip 310+ Test Kit Shown with JG MCCB JG Digitrip 310+ Electronic Trip Unit Ammeter

24 2 63 Amperes JG-Frame Table 32. Complete Breaker with Electronic Trip Units IC Rating at 15/80/ Volts Ampere Rating LS LSI LSG LSIG IEC/UL/CSA 25/25/18 3-Pole JGE305033G JGE333G JGE316033G JGE333G IEC/UL/CSA 25/25/18 -Pole IEC/UL/CSA 0/35/18 3-Pole JGE05033G JGE33G JGE16033G JGE33G JGS305033G JGS333G JGS316033G JGS333G IEC/UL/CSA 0/35/18 -Pole IEC/UL/CSA 70/65/25 3-Pole JGS05033G JGS33G JGS16033G JGS33G JGH305033G JGH333G JGH316033G JGH333G IEC/UL/CSA 70/65/25 -Pole JGH05033G JGH33G JGH16033G JGH33G IEC/UL/CSA //35 3-Pole JGC305033G JGC333G JGC316033G JGC335033G IEC/UL/CSA //35 -Pole JGC05033G JGC33G JGC16033G JGC35033G IEC/UL/CSA 150/150/50 3-Pole JGU305033G JGU333G JGU316033G JGU335033G IEC/UL/CSA 150/150/50 -Pole JGU05033G JGU33G JGU16033G JGU35033G IEC/UL/CSA 200/200/50 3-Pole JGX305033G JGX333G JGX316033G JGX333G IEC/UL/CSA 200/200/50 -Pole JGX05033G JGX33G JGX16033G JGX33G JGE305032G JGE332G JGE316032G JGE332G JGE05032G JGE32G JGE16032G JGE32G JGS305032G JGS332G JGS316032G JGS332G JGS05032G JGS32G JGS16032G JGS32G JGH305032G JGH332G JGH316032G JGH332G JGH05032G JGH32G JGH16032G JGH32G JGC305032G JGC332G JGC316032G JGC332G JGC05032G JGC32G JGC16032G JGC32G JGU305032G JGU332G JGU316032G JGU332G JGU05032G JGU32G JGU16032G JGU32G JGX305032G JGX332G JGX316032G JGX332G JGX05032G JGX32G JGX16032G JGX32G JGE305035G JGE335G JGE316035G JGE335G JGE05035G JGE35G JGE16035G JGE35G JGS305035G JGS335G JGS316035G JGS335G JGS05035G JGS35G JGS16035G JGS35G JGH305035G JGH335G JGH316035G JGH335G JGH05035G JGH35G JGH16035G JGH35G JGC305035G JGC335G JGC316035G JGC335G JGC05035G JGC35G JGC16035G JGC35G JGU305035G JGU335G JGU316035G JGU335G JGU05035G JGU35G JGU16035G JGU35G JGX305035G JGX335G JGX316035G JGX335G JGX05035G JGX35G JGX16035G JGX35G LSG and LSIG breakers do not include neutral CT. Neutral protection = 0%, 6 = 60%, 7 = % electronic trip unit neutral protection is not adjustable. JGE305036G JGE336G JGE316036G JGE336G JGE05036G JGE36G JGE16036G JGE36G JGS305036G JGS336G JGS316036G JGS336G JGS05036G JGS36G JGS16036G JGS36G JGH305036G JGH336G JGH316036G JGH336G JGH05036G JGH36G JGH16036G JGH36G JGC305036G JGC336G JGC316036G JGC336G JGC05036G JGC36G JGC16036G JGC36G JGU305036G JGU336G JGU316036G JGU336G JGU05036G JGU36G JGU16036G JGU36G JGX305036G JGX336G JGX316036G JGX336G JGX05036G JGX36G JGX16036G JGX36G

25 63 Amperes JG-Frame 25 Table 33. JG % Rated Electronic Breaker IC Rating at 15/80/ Volts Ampere Rating LS LSI LSG LSIG IEC/UL/CSA 25/25/ IEC/UL/CSA 0/35/ IEC/UL/CSA 70/65/ JGE305033GC JGE333GC JGE316033GC JGE333GC JGS305033GC JGS333GC JGS316033GC JGS333GC JGH305033GC JGH333GC JGH316033GC JGH333GC LSG and LSIG breakers do not include neutral CT. JGE305032GC JGE332GC JGE316032GC JGE332GC JGS305032GC JGS332GC JGS316032GC JGS332GC JGH305032GC JGH332GC JGH316032GC JGH332GC JGE305035GC JGE335GC JGE316035GC JGE335GC JGS305035GC JGS335GC JGS316035GC JGS335GC JGH305035GC JGH335GC JGH316035GC JGH335GC JGE305036GC JGE336GC JGE316036GC JGE336GC JGS305036GC JGS336GC JGS316036GC JGS336GC JGH305036GC JGH336GC JGH316036GC JGH336GC

26 26 63 Amperes JG-Frame Selection Guide and Ordering Information TFJ TAFJ Endcap Kit Line and Load Terminals JG-Frame circuit breakers include Cu/Al terminals TFJ as standard. When optional copper only terminals are required, order by catalogue number. Table 3. Line and Load Terminals Maximum Breaker Amps Terminal Body Material Wire Type Metric Wire Range mm 2 Individually packed. Standard line and load. Contact factory for availability. Endcap Kits Endcap kits are used on J-Frame breaker line side to connect bus bar or similar electrical connections. Includes hardware. Table 35. Kit of Poles Metric Imperial Control Wire Terminal Kit AWG Wire Range/ of Conductors Multiwire Connectors Standard Pressure Type Terminals Stainless Steel Cu # 350 (1) TFJ Aluminum Cu/Al # 350 (1) TAFJ Optional Copper and Cu/Al Pressure Type Terminals Copper Cu/Al # 350 (1) TCFJ 3 FJ3RTWK FJRTWK FJ3RTDK FJRTDK Control Wire Terminal Kit For use with aluminum or copper terminals only. Table 36. Control Wire Terminal Kit Control Wire Terminal Kit Package of 1 Priced Individually FJCWTK Multiwire Connectors Field-installed multiwire connectors for the load side (OFF) end terminals. They are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks. Multiwire lug kits include terminal shield, mounting hardware, insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed for copper only as used on the load side (OFF) end. Table 37. JG-Frame Multiwire Connectors Ordering Information (Package of 3) Max. Amps Wires per Terminal 3 6 Wire Size Range AWG Cu Kit 3TAFJ3 3TAFJ6 Base Mounting Hardware Base mounting hardware is included with a circuit breaker or moulded case switch. (Included with breaker.) Table 38. Terminal Shields IP30 Location of Poles Line or Load 2, 3 FJTS3K FJTSK Table 39. Interphase Barriers Package of 2 of Poles 3 FJIPBK FJIPBK

27 63 Amperes JG-Frame 27 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Table 0. Accessories Description Reference 2-, 3-Pole -Pole Page Left Center Right Neu. Left Center Right Internal Accessories (Only One Internal Accessory Per Pole) Alarm Lockout (Make/Break) 58 Auxiliary Switch (1A, 1B) 58 Auxiliary Switch (2A, 2B) 58 Auxiliary Switch and Alarm Switch Combination 58 Shunt Trip Standard 58 Undervoltage Release Mechanism 58 External Accessories End Cap Kit 26 Control Wire Terminal Kit 26 Multiwire Connectors 26 Base Mounting Hardware 26 Interphase Barriers 26 Padlockable Handle Block 56 Padlockable Handle Lock Hasp 56 Key Interlock Kit 56 Sliding Bar Interlock Requires Two Breakers 56 Electrical Operator 56 Plug-in Adapters 59 Handle Mechanisms 60 Earth Leakage/Ground Fault Protector 5 Drawout Cassette 59 Digitrip 310+ Test Kit 23 Ammeter/Cause of Trip Display 23 Modifications (Refer to Eaton) Moisture Fungus Treatment Freeze-Tested Circuit Breakers Marine/Naval Application, UL Supplement SA and SB Applicable in indicated pole position May be mounted on left or right pole Accessory available/modification available not both Contact Eaton

28 28 Amperes LG-Frame LG-Frame Typical LG-Frame Circuit Breaker Product Description LG breaker is HACR rated. Interrupting Capacity Ratings Table 1. CSA C22.2 No.5 / UL 89/IEC Interrupting Capacity Ratings Circuit Interrupting Capacity (ka rms Symmetrical Amperes) (ka) Breaker of Poles Volts ac (50/60 Hz) Volts dc Type Icu Ics Icu Ics Icu Ics Icu Ics LGE 3, LGS 3, LGH 3, LGC 3, LGU 3, LGX 3, dc rating apply to substantially non-inductive circuits. 2-pole circuit breaker, or two poles of 3-pole circuits. Time constant is 3 milliseconds minimum at 10 ka and 8 milliseconds minimum at ka. 3-poles in series. 750 Vdc ratings available (-poles in series, not UL listed). Contact Eaton. Current limiting.

29 Amperes LG-Frame 29 Product Selection Table 2. Main ing System L G S 3 FA G C Frame Poles Amperes Trip Unit L Standard/Application G = IEC/CE/UL/CSA 3 = Three = Four Neutral 0% Protected 6 = Four Neutral 60% Protected 7 = Four Neutral % Protected 8 = Four Neutral 0 60% Protected 9 = Four Neutral 0 Protected Performance AA = Adj. Thermal Adj. Magnetic FA = Fixed Thermal Adj. Magnetic KS = Moulded Case Switch 33 = 310+ Electronic LS 32 = 310+ Electronic LSI 35 = 310+ Electronic LSG 36 = 310+ Electronic LSIG NN = Frame Only (No Trip) E S H C U Terminations Terminals Mounting Hardware M = Metric End Caps E = Imperial End Caps G = Line/Load Standard W = Without Terminals Metric Imperial Metric X K Moulded Case Switch Rating Blank = 80% Rated C = % Rated Table 3. Trip Unit ing System LT 3 FA Trip Poles Amperes Trip Unit LT 3 = Three = Four Neutral 0% Protected 8 = Four Neutral 0/60% Protected 9 = Four Neutral 0/% Protected AA = Adj. Thermal Adj. Magnetic FA = Fixed Thermal Adj. Magnetic KS = Moulded Case Switch 33 = 310+ Electronic LS 32 = 310+ Electronic LSI 35 = 310+ Electronic LSG 36 = 310+ Electronic LSIG

30 30 Amperes Frame Size LG, Amperes ( Amperes UL, CSA) LG-Frame, Amperes Table. Complete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) Ampere 3-Pole -Pole (0%) 3-Pole -Pole (0%) Rating Fixed Thermal Adj. Magnetic Adj. Thermal Adj. Magnetic Fixed Thermal Adj. Magnetic Adj. Thermal Adj. Magnetic Fixed Thermal Adj. Magnetic Adj. Thermal Adj. Magnetic Fixed Thermal Adj. Magnetic IC Rating: 35 kaic at 15 and 80 Vac, 18 Vac IC Rating: 50 kaic at 15 and 80 Vac, Vac LGE3FAG LGE3300FAG LGE3350FAG LGE300FAG LGE3500FAG LGE3FAG LGE3AAG LGE3320AAG LGE300AAG LGE3500AAG LGE3AAG LGEFAG LGE300FAG LGE350FAG LGE00FAG LGE500FAG LGEFAG LGEAAG LGE320AAG LGE00AAG LGE500AAG LGEAAG LGS3FAG LGS3300FAG LGS3350FAG LGS300FAG LGS3500FAG LGS3FAG LGS3AAG LGS3320AAG LGS300AAG LGS3500AAG LGS3AAG LGSFAG LGS350FAG LGS350FAG LGS00FAG LGS500FAG LGSFAG IC Rating: 70 kaic at 15 Vac, 65 kaic at 80 Vac, 35 Vac IC Rating: kaic at 15 and 80 Vac, Vac LGH3FAG LGH3300FAG LGH3350FAG LGH300FAG LGH3500FAG LGH3FAG LGH3AAG LGH3320AAG LGH300AAG LGH3500AAG LGH3AAG LGHFAG LGH300FAG LGH350FAG LGH00FAG LGH500FAG LGHFAG LGHAAG LGH320AAG LGH00AAG LGH500AAG LGHAAG LGC3FAG LGC3300FAG LGC3350FAG LGC300FAG LGC3500FAG LGC3FAG LGC3AAG LGC3320AAG LGC300AAG LGC3500AAG LGC3AAG LGCFAG LGC300FAG LGC350FAG LGC00FAG LGC500FAG LGCFAG IC Rating: 150 kaic at 15 and 80 Vac, 65 Vac IC Rating: 200 kaic at 15 and 80 Vac, Vac LGU3FAG LGU3300FAG LGU3350FAG LGU300FAG LGU3500FAG LGU3FAG LGU3AAG LGU3320AAG LGU300AAG LGU3500AAG LGU3AAG LGUFAG LGU300FAG LGU350FAG LGU00FAG LGU500FAG LGUFAG LGUAAG LGU320AAG LGU00AAG LGU500AAG LGUAAG LGX3FAG LGX3300FAG LGX3350FAG LGX300FAG LGX3500FAG LGX3FAG LGX3AAG LGX3320AAG LGX300AAG LGX3500AAG LGX3AAG LGXFAG LGX300FAG LGX350FAG LGX00FAG LGX500FAG LGXFAG Replace suffix G with W for no line and load terminals. For 2-pole applications, use two outer poles. Neutral protection is indicated by the fourth character: = 0%, 7 = %, 8 = adjustable 0 60% and 9 = 0 %. Neutral is on LH side. 320/ amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA rating for the LG. Adjustable thermal units are typically used in IEC markets and are not UL or CSA listed. Note: Please contact Eaton for pricing. Adj. Thermal Adj. Magnetic LGSAAG LGS320AAG LGS00AAG LGS500AAG LGSAAG LGCAAG LGC320AAG LGC00AAG LGC500AAG LGCAAG LGXAAG LGX320AAG LGX00AAG LGX500AAG LGXAAG Table 5. Thermal-Magnetic Trip Unit Ampere Rating 3-Pole Fixed Thermal/ Adj. Magnetic Adj. Thermal/ Adj. Magnetic -Pole (0%) Fixed Thermal/ Adj. Magnetic Adj. Thermal/ Adj. Magnetic LT3FA LT3300FA LT3350FA LT300FA LT3500FA LT3FA LT3AA LT3320AA LT300AA LT3500AA LT3AA LTFA LT300FA LT350FA LT00FA LT500FA LTFA For 2-pole applications, use two outer poles. Neutral protection is indicated by the third character: = 0%, 7 = %, 8 = adjustable 0 60% and 9 = 0 % Adjustable thermal, adjustable magnetic trip units are typically used in IEC markets and are not UL or CSA listed. LTAA LT320AA LT00AA LT500AA LTAA

31 Amperes Frame Size LG, Amperes ( Amperes UL, CSA) 31 Table 6. Moulded Case Switches Ampere Rating of Poles For 2-pole applications, use two outer poles. amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA rating for the LG. Note: Moulded case switches will trip above 0 amperes. Table 7. Breaker Frame Only Ampere Rating IC Rating at 15/ 80 V 35/35 35/35 50/50 50/50 70/65 70/65 / 150/ /200 amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA rating for the LG. For 2-pole applications, use two outer poles. % rated frame. For use with electronic trip units only. Table 8. Electronic Trip Units Digitrip 310+ Ampere Rating 3-Pole 00 -Pole 00 Required for -wire systems if neutral protection is desired. amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA listed rating for the LG. Neutral protection: = 0%, 6 = 60%, 7 = %. Electronic trip unit neutral protection is not adjustable. Note: Long time pickup no rating plug needed. Ampere Settings,, 500, 00, 350, 315, 300, (315, are IEC ratings only). Ampere Settings, 500, 50, 00, 350, 315, 300, (315 is IEC rating only). 00 Ampere Settings 00, 350, 315, 300,, 225, 200, 160 (315 is IEC rating only). Ampere Settings, 225, 200, 175, 160, 150, 125, (160 is IEC rating only). Note: Adjustable long time delay 2 2 seconds at 6 x I r. Adjustable short time delay Inst., 120, 300 ms. Table 9. Plug-in Test Kit Voltage Rating LGK300KSG LGK00KSG LGK3KSG LGKKSG 3-Pole -Pole (0%) LGE3NN LGE3NNWC LGS3NN LGS3NNWC LGH3NN LGH3NNWC LGC3NN LGU3NN LGX3NN LGENN LGSNN LGHNN LGCNN LGUNN LGXNN LS LSI LSG LSIG Neutral CT for LSG & LSIG LT333 LT30033 LT333 LT333 LT33 LT0033 LT33 LT33 LT332 LT30032 LT332 LT332 LT32 LT0032 LT32 LT32 LT335 LT30035 LT335 LT335 LT35 LT0035 LT35 LT35 LT336 LT30036 LT336 LT336 LT36 LT0036 LT36 LT36 LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT Table 50. Breaker Mount Ammeter Description Digitrip 310+ Test Kit Digitrip 310+ Test Kit Shown with JG MCCB LG Digitrip 310+ Electronic Trip Unit Ammeter 120 Vac 230 Vac MTST120V MTST230V Breaker Mount Ammeter DIGIVIEW Note: Use on electronic trip only.

32 32 Amperes Frame Size LG, Amperes ( Amperes UL, CSA) Table 51. Complete LG Breakers with Electronic Trip Unit (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) Ampere Rating LS LSI LSG LSIG Neutral CT for LSG & LSIG 3-Pole IC Rating: 35 kaic at 15 and 80 Vac, 18 kaic at Vac 00 LGE333G LGE30033G LGE333G LGE333G LGE332G LGE30032G LGE332G LGE332G -Pole IC Rating: 35 kaic at 15 and 80 Vac, 18 kaic at Vac 00 LGE33G LGE0033G LGE33G LGE33G LGE32G LGE0032G LGE32G LGE32G 3-Pole IC Rating: 50 kaic at 15 and 80 Vac, 25 kaic at Vac 00 LGS333G LGS30033G LGS333G LGS333G LGS332G LGS30032G LGS332G LGS332G -Pole IC Rating: 50 kaic at 15 and 80 Vac, 25 kaic at Vac 00 LGS33G LGS0033G LGS33G LGS33G LGS32G LGS0032G LGS32G LGS32G 3-Pole IC Rating: 70 kaic at 15 Vac, 65 kaic at 80 Vac, 35 kaic at Vac 00 LGH333G LGH30033G LGH333G LGH333G LGH332G LGH30032G LGH332G LGH332G -Pole IC Rating: 70 kaic at 15 Vac, 65 kaic at 80 Vac, 35 kaic at Vac 00 LGH33G LGH0033G LGH33G LGH33G LGH32G LGH0032G LGH32G LGH32G 3-Pole IC Rating: kaic at 15 Vac and 80 Vac, 50 kaic at Vac 00 LGC333G LGC30033G LGC333G LGC333G LGC332G LGC30032G LGC332G LGC332G -Pole IC Rating: kaic at 15 Vac and 80 Vac, 50 kaic at Vac 00 LGC33G LGC0033G LGC33G LGC33G LGC32G LGC0032G LGC32G LGC32G 3-Pole IC Rating: 150 kaic at 15 Vac and 80 Vac, 65 kaic at Vac 00 LGU333G LGU30033G LGU333G LGU333G LGU332G LGU30032G LGU332G LGU332G -Pole IC Rating: 150 kaic at 15 Vac and 80 Vac, 65 kaic at Vac 00 LGU33G LGU0033G LGU33G LGU33G LGU32G LGU0032G LGU32G LGU32G 3-Pole IC Rating: 200 kaic at 15 Vac and 80 Vac, 65 kaic at Vac 00 LGX333G LGX30033G LGX333G LGX333G LGX332G LGX30032G LGX332G LGX332G -Pole IC Rating: 200 kaic at 15 Vac and 80 Vac, 65 kaic at Vac 00 LGX33G LGX0033G LGX33G LGX33G LGX32G LGX0032G LGX32G LGX32G LGE335G LGE30035G LGE335G LGE335G LGE35G LGE0035G LGE35G LGE35G LGS335G LGS30035G LGS335G LGS335G LGS35G LGS0035G LGS35G LGS35G LGH335G LGH30035G LGH335G LGH335G LGH35G LGH0035G LGH35G LGH35G LGC335G LGC30035G LGC335G LGC335G LGC35G LGC0035G LGC35G LGC35G LGU335G LGU30035G LGU335G LGU335G LGU35G LGU0035G LGU35G LGU35G LGX335G LGX30035G LGX335G LGX335G LGX35G LGX0035G LGX35G LGX35G LGE336G LGE30036G LGE336G LGE336G LGE36G LGE0036G LGE36G LGE36G LGS336G LGS30036G LGS336G LGS336G LGS36G LGS0036G LGS36G LGS36G LGH336G LGH30036G LGH336G LGH336G LGH36G LGH0036G LGH36G LGH36G LGC336G LGC30036G LGC336G LGC336G LGC36G LGC0036G LGC36G LGC36G LGU336G LGU30036G LGU336G LGU336G LGU36G LGU0036G LGU36G LGU36G LGX336G LGX30036G LGX336G LGX336G LGX36G LGX0036G LGX36G LGX36G Replace suffix G with W for no line and load terminals. Required for -wire systems if neutral protection is desired. For 2-pole applications, use two outer poles. amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA listed rating for the LG. Neutral protection: = 0%, 6 = 60%, 7 = %. Electronic trip unit neutral protection is not adjustable. LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT LGFCT LGFCT00 LGFCT LGFCT

33 Amperes Frame Size LG, Amperes ( Amperes UL, CSA) 33 Table 52. LG % Rated Electronic Breaker Ampere LS LSI LSG LSIG Rating IEC/UL/CSA 35 kaic at 15 and 80 Vac, 18 kaic at Vac 00 LGE333GC LGE30033GC LGE333GC LGE333GC IEC/UL/CSA 50 kaic at 15 and 80 Vac, 25 kaic at Vac 00 LGS333GC LGS30033GC LGS333GC LGS333GC IEC/UL/CSA 70 kaic at 15 and 80 Vac, 35 kaic at Vac 00 LGH333GC LGH30033GC LGH333GC LGH333GC LGE332GC LGE30032GC LGE332GC LGE332GC LGS332GC LGS30032GC LGS332GC LGS332GC LGH332GC LGH30032GC LGH332GC LGH332GC LGE335GC LGE30035GC LGE335GC LGE335GC LGS335GC LGS30035GC LGS335GC LGS335GC LGH335GC LGH30035GC LGH335GC LGH335GC amperes is not a UL or CSA listed rating. amperes is the maximum UL and CSA listed rating for the LG. LGE336GC LGE30036GC LGE336GC LGE336GC LGS336GC LGS30036GC LGS336GC LGS336GC LGH336GC LGH30036GC LGH336GC LGH336GC

34 3 Amperes Frame Size LG, Amperes ( Amperes UL, CSA) Line and Load Terminals Table 53. Line and Load Terminals Maximum Breaker Amperes Terminal Body Material Wire Type AWG Wire Range/ of Conductors Metric Wire Range (mm 2 ) of Terminals Included Aluminum Aluminum Copper Copper Aluminum Aluminum Copper Copper Aluminum Copper Cu/Al Cu/Al Cu Cu Cu/Al Cu/Al Cu Cu Cu/Al Cu (1) (1) (1) (1) (2) (2) (2) (2) (1) (1) Includes LTS3K (3-pole) or LTSK (-pole) terminal covers. Standard terminal included with complete breaker (1) (1) (1) (1) (2) (2) (2) (2) (1) (1) TA631LK TA631LK 3T631LK T631LK 3TA632LK TA632LK 3T632LK T632LK TA350LK T350LK Table 5. Terminal Covers Table 56. Terminal Extensions Table 58. Handle Extension Description of Poles Description 3-Pole Terminal Cover -Pole Terminal Cover LTS3K LTSK Included in TA63IL, T63IL, TA632L kits listed above. Table 55. End Cap Kits (MIO Metric Nuts) of Poles 3 L3RTWK LRTWK 3 Table 57. Terminal Spreaders of Poles 3 LGTEW3 LGTEW LGTES3 LGTES Handle Extension HEXLG Figure 2. Terminals and Terminal Cover for the LG Breaker Includes LTS3K (3-Pole) or LTSK (-Pole) Terminal Covers Note: Extended terminal covers add 2.13 inches (5.0 mm) to breaker length.

35 Amperes LG-Frame 35 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Table 59. Accessories Description Reference 3-Pole -Pole Page Left Center Right Neu. Left Center Right Internal Accessories (Only One Internal Accessory Per Pole) Alarm Lockout (Make/Break) 58 Auxiliary Switch (1A, 1B) 58 Auxiliary Switch (2A, 2B) 58 Auxiliary Switch and Alarm Switch Combination 58 Shunt Trip Standard 58 Undervoltage Release Mechanism 58 External Accessories End Cap Kit 3 Handle Extension 3 Terminal Cover 3 Padlockable Handle Block 56 Padlockable Handle Lock Hasp 56 Key Interlock Kit 56 Sliding Bar Interlock Requires Two Breakers 56 Electrical Operator 56 Plug-in Adapters 59 Rear Connecting Studs 56 Handle Mechanisms 60 Earth Leakage/Ground Fault Protector 5 Drawout Cassette 59 Digitrip 310+ Test Kit 31 Ammeter/Cause of Trip Display 31 Modifications (Refer to Eaton) Moisture Fungus Treatment Freeze-Tested Circuit Breakers Marine/Naval Application, UL Supplement SA and SB Applicable in indicated pole position May be mounted on left or right pole Accessory available/modification available not both Contact Eaton

36 Amperes NG-Frame NG-Frame Technical Data and Specifications Table 60. CSA C22.2 No. 5 / UL 89/IEC Interrupting Capacity Ratings Circuit Interrupting Capacity (ka Symmetrical Amperes) Breaker of Poles Volts ac (50/60 Hz) Type I cu I cs I cu I cs I cu I cs NGS 2, 3, NGH 2, 3, NGC 2, 3, NGU amperes is not a UL or CSA listed rating amperes is the maximum UL and CSA rating for NG. Contact Eaton for additional details and availability. Typical NG-Frame Circuit Breaker Product Description All Cutler-Hammer NG-Frame Circuit Breakers by Eaton Corporation are suitable for reverse feed use. All NG-Frame circuit breakers are HACR rated.

37 Amperes NG-Frame 37 NG-Frame Digitrip Specifications Table 61. Specifications Trip Unit Type Digitrip RMS 310 Digitrip OPTIM 550 Digitrip OPTIM 1050 rms Sensing Yes Yes Yes Breaker Type Frame N N N Ampere Range 00 A 1200 A 00 A 1200 A 00 A 1200 A Interrupting Rating at Volts 25, 35, 65 (ka) 25, 35, 65 (ka) 25, 35, 65 (ka) Protection Ordering Options LS, LSG LSI, LSIG LSI, LSIG, LSI(A) LSI(A), LISG Fixed Rated Plug (I n ) Yes Yes Yes Yes Overtemperature Trip Yes Yes Yes Yes Long Delay Protection (L) Adjustable Rating Plug (I n ) Yes Yes No No Long Delay Pickup (I n ) (I n ) x (I n ) x (I n ) Long Delay Time I 2 t 12 Seconds 12 Seconds 2 2 Seconds 2 2 Seconds Long Delay Time I t No No 1 5 Seconds 1 5 Seconds Long Delay Thermal Memory Yes Yes Yes Yes High Load Alarm No No No x I r Short Delay Protection (S) Short Delay Pickup % x (I n ) % x (I n ) % x (I r ) % x (I r ) Short Delay Time I 2 t ms No 500 ms 500 ms Short Delay Time Flat No Inst 300 ms 500 ms 500 ms Short Delay Time Zone Selective Interlocking No No Yes Yes Instantaneous Protection (I) Instantaneous Pickup No % x (I n ) % x (I n ) % x (I n ) Discriminator No No Yes Yes Instantaneous Override Yes Yes Yes Yes Ground Fault Protection (G) Ground Fault Alarm No No 20 % x (I s ) 20 % x (I s ) Ground Fault Pickup 1 5 x Ig (160 A) 1 5 x Ig (160 A) 20 % x (I s ) 20 % x (I s ) Ground Fault Delay I 2 t No No 500 ms 500 ms Ground Fault Delay Flat Inst 500 ms Inst 500 ms 500 ms 500 ms Ground Fault Zone Selective Interlocking No No Yes Yes Ground Fault Thermal Memory Yes Yes Yes Yes System Diagnostics Status LEDs Yes Yes Yes Yes Cause of Trip LEDs No No Yes Yes Magnitude of Trip Information No No Yes Yes Remote Signal Contact Ground Alarm Yes Yes Yes Yes Local Auxiliary and Bell Alarm Contact Optional Optional Optional Included System Monitoring Digital Display No No Yes Yes Current No No Yes Yes Power and Energy No No No Yes Power Quality Harmonics No No No Yes Power Factor No No No Yes Communications Cutler-Hammer PowerNet No No Yes Yes Testing Testing Method Test Set (STK2) Adjust by rating plug. Zone interlock kit. With separate ground fault alarm unit (GFAU). By OPTIMizer/BIM. Eaton s Cutler-Hammer PowerNet kit. OPTIMizer, BIM, Cutler-Hammer PowerNet OPTIMizer, BIM, Cutler-Hammer PowerNet Legend: BIM = Breaker Interface Module (A) = GF Alarm I s = Sensor Rating I n = Rating Plug I r = Long Delay Pickup Setting

38 Amperes NG-Frame Dimensions/Weights Table 62. Dimensions in Inches (mm) of Poles Width Height Depth 2, (209.6) (282.6) (06.) (06.) 5.50 (139.7) 5.50 (139.7) Table 63. Approximate Shipping Weight in Lbs. (kg) Breaker Type Complete Breaker of Poles 2 3 NGS, NGH, NGC, NGU 37 (16.8) 5 (20.) 58 (26.3) Product Selection This information is presented only as an aid to understanding s. It is not to be used to build s for circuit breakers or trip units. Table 6. Circuit Breaker/Frame ing System N G S T33 W P18 Frame N S H C Standard/Application G = IEC/CE/UL/CSA Performance Rating U K Moulded Case Switch of Poles 2 = 2 Poles 3 = 3 Poles = Poles Trip Unit 33 = LS 32 = LSI 35 = LSG 36 = LSIG Amperes 800 = = = 1 Suffix W = Without Terminals K = Moulded Case Switch Rating Plug P08 = 1200AF = 1200/0/800/ Adjustable P09 = 1AF = 1/0/800/ Adjustable P18 = 800AF = 800//500/00 Adjustable P19 = 800AF = 800//500/00 Adjustable P35 = 1AF = 1/1/0/800 Adjustable P36 = 1AF = 1/0/800/ Adjustable

39 Amperes Frame Size NG, 1200 Amperes 39 NG-Frame, 1200 Amperes Selection Guide and Ordering Information Table 65. Type NGS Standard Interrupting Capacity U e Max. 690 Vac, 25 kaic at Vac, 50 ka l cu at 80 Vac or 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay For ac use only. NG MCCB s are suitable for 0 C or 50 C applications. Order suffix V3 to eliminate standard 0 C labeling. Order terminals separately. Unprotected left pole neutral. Insert E for % neutral or EH for 60% neutral between T33 or T32 and W (e.g., NGS12T32EHWP08). Neutral is on LH side. Non-UL listed NG 1 with 1 ampere trip unit is also available. Note: NG MCCB s have metric threading on line and load conductors. Use ND MCCB s if imperial threading is required. Table 66. Moulded Case Switches Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) Included with Breaker LS LSI LSG LSIG Fixed Rating Plug Adj. Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere Adjustable I 300 ms I 300 ms Rating Ampere A A Settings I 500 ms I 500 ms Pole NGS2800T33WP18 NGS2800T32WP18 NGS2800T35WP18 NGS2800T36WP Pole NGS3800T33WP18 NGS3800T32WP18 NGS3800T35WP18 NGS3800T36WP Pole NGS800T33WP18 NGS800T32WP Pole NGS212T33WP08 NGS212T32WP08 NGS212T35WP08 NGS212T36WP Pole NGS312T33WP08 NGS312T32WP08 NGS312T35WP08 NGS312T36WP Pole NGS12T33WP08 NGS12T32WP NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 00/500//800 A8NES800T1 00/500//800 A8NES800T1 00/500//800 A8NES800T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 Ampere Rating U e Maximum 690 Vac 3-Pole -Pole 800 MCS Only without Line and Load Terminals NGK3800KSW MCS Only without Line and Load Terminals NGK800KSW 1200 MCS Only without Line and Load Terminals NGK312KSW MCS Only without Line and Load Terminals NGK12KSW 1 MCS Only without Line and Load Terminals NGK3125KSW MCS Only without Line and Load Terminals NGK125KSW For ac use only. Moulded case switch will trip above 1,000 amperes. For 2-pole applications, use outer poles of 3-pole moulded case switch.

40 Amperes Frame Size NG, 1200 Amperes Table 67. Type NGH High Interrupting Capacity U e Max. 690 Vac, 35 kaic at Vac, 65 ka I cu at 80 Vac, 70 ka I cu at 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) LS LSI LSG LSIG Fixed Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere I 300 ms I 300 ms Rating A A I 500 ms I 500 ms Included with Breaker Adjustable Rating Plug Adjustable Ampere Settings Pole NGH2800T33WP18 NGH2800T32WP18 NGH2800T35WP18 NGH2800T36WP Pole NGH3800T33WP18 NGH3800T32WP18 NGH3800T35WP18 NGH3800T36WP Pole NGH800T33WP18 NGH800T32WP Pole NGH212T33WP08 NGH212T32WP08 NGH212T35WP08 NGH212T36WP Pole NGH312T33WP08 NGH312T32WP08 NGH312T35WP08 NGH312T36WP Pole NGH12T33WP08 NGH12T32WP NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 00/500//800 A8NES800T1 00/500//800 A8NES800T1 00/500//800 A8NES800T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 For ac use only. NG MCCB s are suitable for 0 C or 50 C applications. Order suffix V3 to eliminate standard 0 C labeling. Order terminals separately. Unprotected left pole neutral. Insert E for % neutral or EH for 60% neutral between T33 or T32 and W (e.g., NGH12T32EHWP08). Neutral is on LH side. Non-UL listed NG 1 with 1 ampere trip unit is also available. Note: NG MCCB s have metric threading on line and load conductors. Use ND MCCB s if imperial threading is required.

41 Amperes Frame Size NG, 1200 Amperes 1 Table 68. Type NGC Very High Capacity U e Max. 690 Vac, 65 kaic at Vac, ka I cu at 80 Vac or 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) LS LSI LSG LSIG Fixed Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere I 300 ms I 300 ms Rating A A I 500 ms I 500 ms Included with Breaker Adjustable Rating Plug Adjustable Ampere Settings Pole NGC2800T33WP18 NGC2800T32WP18 NGC2800T35WP18 NGC2800T36WP Pole NGC3800T33WP18 NGC3800T32WP18 NGC3800T35WP18 NGC3800T36WP Pole NGC800T33WP18 NGC800T32WP Pole NGC212T33WP08 NGC212T32WP08 NGC212T35WP08 NGC212T36WP Pole NGC312T33WP08 NGC312T32WP08 NGC312T35WP08 NGC312T36WP Pole NGC12T33WP08 NGC12T32WP NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 12NEST 12NEST 12NES700T 12NES800T 12NES900T 12NES0T 12NES1200T 00/500//800 A8NES800T1 00/500//800 A8NES800T1 00/500//800 A8NES800T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 /800/ 0/1200 A12NES1200T1 For ac use only. NG MCCB s are suitable for 0 C or 50 C applications. Order suffix V3 to eliminate standard 0 C labeling. Order terminals separately. Unprotected left pole neutral. Insert E for % neutral or EH for 60% neutral between T33 or T32 and W (e.g., NGC12T32EHWP08). Neutral is on LH side. Non-UL listed NG 1 with 1 ampere trip unit is also available. Note: NG MCCB s have metric threading on line and load conductors. Use ND MCCB s if imperial threading is required.

42 Amperes Frame Size NG, 1200 Amperes Table 69. Type NGU Ultra High Capacity U e Max. 690 Vac, 65 kaic at Vac, 150 ka I cu at 80 Vac or 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) LS LSI LSG LSIG Fixed Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere I 300 ms I 300 ms Rating A A I 500 ms I 500 ms Included with Breaker Adjustable Rating Plug Adjustable Ampere Setting Pole NGU3800T33WP18 NGU3800T32WP18 NGU3800T35WP18 NGU3800T36WP Pole NGU800T33WP18 NGU800T32WP NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 8NES00T 8NES50T 8NES500T 8NES550T 8NEST 8NEST 8NES700T 8NES800T 00/500//800 A8NES800T1 00/500//800 A8NES800T1 For ac use only. NG MCCB s are suitable for 0 C or 50 C applications. Order suffix V3 to eliminate standard 0 C labeling. Order terminals separately. Unprotected left pole neutral. Insert E for % neutral or EH for 60% neutral between T33 or T32 and W (e.g., NGU12T32EHWP08). Neutral is on LH side. Non-UL listed NG 1 with 1 ampere trip unit is also available. Note: NG MCCB s have metric threading on line and load conductors. Use ND MCCB s if imperial threading is required.

43 Amperes Frame Size NG, 1 Amperes 50 ka at 15 Vac 3 Table 70. Type NGS Standard Interrupting Capacity U e Max. 690 Vac, 50 ka I cu at 15 Vac Maximum Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit and Rating Plugs Continuous of Poles L Adjustable Long Delay Pickup (By Adjustable Rating Plug) Ampere S Adjustable Short Delay Pickup with Fixed Short Delay Time Rating at 0 C (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay LS LSI LSG LSIG Adjustable Rating Plug 2 8 x I n 2 8 x I n I 300 ms 2 8 x I n A I 500 ms 2 8 x I n I 300 ms A I 500 ms 1 3-Pole -Pole Line and Load Terminals N-Frame circuit breakers do not include terminals as standard. When copper or Cu/ Al terminals are required, order by catalogue number. Table 71. Line and Load Terminals Optional Copper and Cu/Al Pressure Type Terminals 1 Copper Copper /0 00 () T1200NB3M Single terminals individually packed. Not suitable with 1 ampere frame version. Base Mounting Hardware Base mounting hardware is included with a circuit breaker or moulded case switch. Table 72. Base Mounting Hardware Metric hardware included with breaker. NGS316T33WP35 NGS16T33WP35 NGS316T32WP35 NGS16T32WP35 Keeper Nut Not required on NG-Frame. Terminals are threaded. Handle Extension Included with breaker. Additional handle extensions are available. Table 73. Handle Extension Description NGS316T35WP35 NGS316T36WP35 For ac use only. NG MCCB s are suitable for 0 C or 50 C applications. Order suffix V3 to eliminate standard 0 C labeling. No UL or CSA label is available for the 1 ampere frame size. Unprotected left pole neutral. Insert 1 for % protected neutral or 6 for 60% protected neutral before WP suffix (e.g., NGS16T336WP35). Note: NG 1 MCCB uses metric threading on line and load conductors. The NG 1 is not UL or CSA listed. Maximum Breaker Amperes of Poles 3- and -pole 3- and -pole Terminal Body Material Description Imperial Hardware: x 1.25 Pan-Head Steel Screws and Lock Washers Metric Hardware: M8 Pan-Head Steel Screws and Lock Washers Wire Type BMH5 BMH5M Metric Wire Range mm 2 AWG Wire of Conductors Single Handle Extension HEX5 Interphase Barriers 800/ 0/ 1/ 1 The interphase barriers provide additional electrical clearance between circuit breaker poles for special termination applications. Barriers are high dielectric insulating plates that are installed in the moulded slots between the terminals. (Field installation only.) Table 7. Interphase Barriers Description Interphase Barriers IPB5

44 Amperes NG-Frame Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Table 75. Accessories Description Reference 3-Pole -Pole Page Left Center Right Neu. Left Center Right Internal Accessories (Only One Internal Accessory Per Pole) Alarm Lockout (Make/Break) 58 Auxiliary Switch (1A, 1B) 58 Auxiliary Switch (2A, 2B) 58 Auxiliary Switch and Alarm Switch Combination 58 Shunt Trip Standard 58 Undervoltage Release Mechanism 58 External Accessories Base Mounting Hardware 3 Interphase Barriers 175 Non-Padlockable Handle Block 56 Padlockable Handle Lock Hasp 178 Key Interlock Kit 56 Sliding Bar Interlock Requires Two Breakers 56 Electrical Operator 56 Plug-in Adapters 59 Rear Connecting Studs 56 Handle Mechanisms 60 Drawout Cassette 59 Handle Extension 19 Digitrip 310 Test Kit 195 Modifications (Refer to Eaton) Moisture Fungus Treatment Freeze-Tested Circuit Breakers Marine/Naval Application, UL Supplement SA and SB Applicable in indicated pole position Page number is from the MCCB Product Guide PG T.K. Contact Eaton. May be mounted on left or right pole not both Accessory available/modification available

45 RG-Frame RG-Frame Circuit Breaker Product Description Cutler-Hammer RG-Frame Circuit Breakers by Eaton Corporation are available as frame (which includes trip unit), rating plug and terminals. All R-Frame circuit breakers are suitable for reverse feed use Amperes RG-Frame Technical Data and Specifications Table 76. CSA /C22.2 No. 5 / UL 89/CSA Interrupting Capacity Ratings Circuit Breaker Type of Poles RGH 3, RGC 3, Utilization Category A circuit breakers. Note: See Page 12 for Trip Unit Specifications. Table 77. IEC 97-2 Interrupting Capacity Ratings Circuit Breaker Type RGH I cu I cs RGC I cu I cs of Poles 3, 3, Utilization Category A circuit breakers. Interrupting Capacity (ka Symmetrical Amperes) Volts ac (50/60 Hz) Interrupting Capacity (ka Symmetrical Amperes) Volts ac (50/60 Hz)

46 Amperes Frame Size RG, 0 Amperes Product Selection Table 78. Circuit Breaker/Frame ing System RGH 3 16 T33 W A01 Type RGH 65K RGC K Amperes 16 = 1 A 20 = 2000 A 25 = 0 A of Poles 3 = 3 Poles = Poles Trip Function Digitrip 310 T33 = LS T32 = LSI T35 = LSG T36 = LSIG Digitrip 610 T61 = LI T62 = LSI T63 = LS T6 = LIG T65 = LSG T66 = LSIG Digitrip 910 T91 = LI T92 = LSI T93 = LS T9 = LIG T95 = LSG T96 = LSIG R E P Modification Suffix = Ground Fault Remote RES Trip = % Protection (New Design 310) RES Trip Unit = % Prot. Neut. P RES Trip Unit V3 = Electronic Trip w/o Ambient Temperature Marked on Trip Unit W = w/o Terms K = Moulded Case Switch Function Codes A12-A19 = Auxiliary Switch B01-B02 = Bell Alarm D01 = Drawout Moving Carrier E01-E13 = Electrical Operator H01-H11 = Special Ratings J01 = Moisture Fungus Proof L01-L05 = Locks N01 = Low Energy Shunt Trip P01-P6 = Rating Plugs Q01-Q02 = Terminal Block S21-S88 = Shunt Trip T21-T37 = UVR (DC) U33-U58 = UVR (AC) W01 = Walking Beam Interlock X01-X08 = Load Termination Y01-Y08 = Line Termination Z01-Z08 = Line & Load Termination Dimensions/Weights Table 79. Dimensions in Inches (mm) Width Height Depth of Poles (393.7) (508.0) (06.) (06.) 9.75 (27.7) 9.75 (27.7) Table 80. Approximate Shipping Weight, Lbs. (kg) Breaker Complete Breaker Type of Poles 3 1 Amperes RGH, RGC 102 (6.3) 135 (61.2) 2000 Amperes RGH, RGC 102 (6.3) 135 (61.2) 0 Amperes RGH, RGC 135 (61.2) 182 (82.6)

47 800 0 Amperes Frame Size RG, 0 Amperes 7 RG-Frame, 0 Amperes Selection Guide and Ordering Information Table 81. Type RGH with Digitrip 310 High Interrupting Capacity U e Maximum 690 Vac, 50 kaic at Vac, 70 ka I cu at 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) LS LSI LSG LSIG Fixed Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere I 300 ms I 300 ms Rating A A I 500 ms I 500 ms 1 3-Pole RGH316T33WP08 RGH316T32WP08 RGH316T35WP08 RGH316T36WP RGH320T33WP16 RGH320T32WP16 RGH320T35WP16 RGH320T36WP RGH325T33WP39 RGH325T32WP39 RGH325T35WP39 RGH325T36WP Pole RGH16T33WP08 RGH16T32WP RGH20T33WP16 RGH20T32WP RGH25T33WP39 RGH25T32WP RES08T 16RES10T 16RES12T 16RES125T 16RES1T 16RES15T 16RES16T 20RES10T 20RES12T A20RES125T A20RES1T A20RES16T A20RES20T 25RES12T 25RES125T A25RES16T A25RES20T A25RES25T 16RES08T 16RES10T 16RES12T 16RES125T 16RES1T 16RES15T 16RES16T 20RES10T 20RES12T A20RES125T A20RES1T A20RES16T A20RES20T 25RES12T 25RES125T A25RES16T A25RES20T A25RES25T For SCR application, use 2000 ampere frame. Order terminals separately. Mounting hardware not included. Ground fault equipped trip units available with remote indicating panel. Add R to catalogue number, e.g., RGH316T35RW. Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. Unprotected left pole neutral. Add P to catalogue number for % protected left pole neutral, add E for 60% protected, e.g., RGH16T33PW, RGH16T33EW. Note: RG MCCB s have metric threading on line and load conductors. Use RD MCCB s if imperial threading is required. Included with Breaker Adjustable Rating Plug Adjustable Ampere Settings 800/0/ 1200/1 A16RES16T1 0/1200/ 1/2000 A20RES20T1 1200/1/ 2000/0 A25RES25T1 800/0/ 1200/1 A16RES16T1 0/1200/ 1/2000 A20RES20T1 1200/1/ 2000/0 A25RES25T1

48 Amperes Frame Size RG, 0 Amperes Table 82. Type RGC with Digitrip 310 Very High Interrupting Capacity U e Maximum 690 Vac, 65 kaic at Vac, ka I cu at 15 Vac Maximum Continuous Ampere Rating at 0 C of Poles Short Time Range Short Time Delay Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 310 Electronic Trip Unit with Adjustable Rating Plugs L Adjustable Long Delay Pickup (By Adjustable Rating Plug) S Adjustable Short Delay Pickup with Fixed Short Delay Time (I 2 t Response) or Adjustable Short Delay Time (Flat Response) I Adjustable Instantaneous Pickup by Setting Short Delay Time to Instantaneous G Adjustable Ground Fault Pickup with Adjustable Ground Fault Delay (Flat Response) Interchangeable Rating Plugs (Order as Individual Component) LS LSI LSG LSIG Fixed Rating Plug 2 8 x I n 2 8 x I n 2 8 x I n 2 8 x I n Ampere I 300 ms I 300 ms Rating A A I 500 ms I 500 ms 1 3-Pole RGC316T33WP08 RGC316T32WP08 RGC316T35WP08 RGC316T36WP RGC320T33WP16 RGC320T32WP16 RGC320T35WP16 RGC320T36WP RGC325T33WP39 RGC325T32WP39 RGC325T35WP39 RGC325T36WP Pole RGC16T33WP08 RGC16T32WP RGC20T33WP16 RGC20T32WP RGC25T33WP39 RGC25T32WP RES08T 16RES10T 16RES12T 16RES125T 16RES1T 16RES15T 16RES16T 20RES10T 20RES12T A20RES125T A20RES1T A20RES16T A20RES20T 25RES12T 25RES125T A25RES16T A25RES20T A25RES25T 16RES08T 16RES10T 16RES12T 16RES125T 16RES1T 16RES15T 16RES16T 20RES10T 20RES12T A20RES125T A20RES1T A20RES16T A20RES20T 25RES12T 25RES125T A15RES16T A25RES20T A25RES25T For SCR application, use 2000 ampere frame. Order terminals separately. Mounting hardware not included. Ground fault equipped trip units available with remote indicating panel. Add R to catalogue number, e.g., RGH316T35RW. Additional IEC ratings are available on adjustable rating plugs. Contact your Eaton representative. Unprotected left pole neutral. Add P to catalogue number for % protected left pole neutral, add E for 60% protected, e.g., RGH16T33PW, RGH16T33EW. Note: RG MCCB s have metric threading on line and load conductors. Use RD MCCB s if imperial threading is required. Included with Breaker Adjustable Rating Plug Adjustable Ampere Settings 800/0/ 1200/1 A16RES16T1 0/1200/ 1/2000 A20RES20T1 1200/1/2000/ 0 A25RES25T1 800/0/ 1200/1 A16RES16T1 0/1200/ 1/2000 A20RES20T1 1200/1/ 2000/0 A25RES25T1 Table 83. Moulded Case Switches Ampere Rating of Poles Pole -Pole Moulded case switch will trip above 17,500 amperes. RGK316WK RGK320WK RGK16WK RGK20WK

49 800 0 Amperes Frame Size RG, 0 Amperes Digitrip 610 & 910 Trip Units 9 Table 8. Type RG with Digitrip 610 and 910 Maximum Continuous Ampere Rating at 0 C of Poles Long Delay Pickup Long Delay Time Short Time Range Short Time Delay Instantaneous Ground Fault Pickup Ground Fault Delay Circuit Breaker Frame Including Digitrip RMS 610 and 910 Electronic Trip Unit with Rating Plugs Order as Individual Component L Adjustable Long Delay Pickup (I r ) with Adjustable Long Delay Time S Adjustable Short Delay Pickup with Adjustable Short Delay Time (I 2 t or Flat Response) I Adjustable Instantaneous Pickup G Adjustable Ground Fault Pickup with Adjustable Ground Fault Time Delay (I 2 t or Flat Response) Order terminals separately. Mounting hardware not included. Not to exceed 1200 ampere ground fault pickup. Note: RG MCCB s have metric threading on line and load conductors. Use RD MCCB s if imperial threading is required. Digitrip RMS Interchangeable Rating Plug (Order as Individual Component) LI LS LSI LIG LSG LSIG Fixed Rating Plug x I n 0.5 I.0 n x I n x I n x I n x I n Ampere 2 2 Seconds 2 2 Seconds 2 2 Seconds 2 2 Seconds 2 2 Sec. 2 2 Seconds Rating 2 6 x I r 2 6 x I r 2 6 x I r 2 6 x I r 2 6 x I r 2 6 x I r 500 ms 500 ms 500 ms 500 ms 2 6 x M1 & M2 2 6 x M1 & M2 2 6 x M1 & M2 2 6 x M1 & M x In x In x In 500 ms 500 ms 500 ms Type RGH with Digitrip 610 High Interrupting Capacity U e Max. 690 Vac, 50 kaic at Vac, 70 ka I cu at 15 Vac 1 3-Pole RGH316T61WP RGH316T63WP RGH316T62WP RGH316T6WP RGH316T65WP RGH316T66WP Includes 1 A Rating Plug RGH320T61WP9 RGH320T63WP9 RGH320T62WP9 RGH320T6WP9 RGH320T65WP9 RGH320T66WP Includes 2000 A Rating Plug RGH325T61WP53 RGH325T63WP53 RGH325T62WP53 RGH325T6WP53 RGH325T65WP53 RGH325T66WP53 1 Includes 0 A Rating Plug Type RGC with Digitrip 610 Very High Interrupting Capacity U e Max. 690 Vac, 65 kaic at Vac, ka I cu at 15 Vac 1 3-Pole RGC316T61WP RGC316T63WP RGC316T62WP RGC316T6WP RGC316T65WP RGC316T66WP Includes 1 A Rating Plug RGC320T61WP9 RGC320T63WP9 RGC320T62WP9 RGC320T6WP9 RGC320T65WP9 RGC320T66WP Includes 2000 A Rating Plug RGC325T61WP53 RGC325T63WP53 RGC325T62WP53 RGC325T6WP53 RGC325T65WP53 RGC325T66WP53 1 Includes 0 A Rating Plug Type RGH with Digitrip 910 High Interrupting Capacity U e Max. 690 Vac, 50 kaic at Vac, 70 ka I cu at 15 Vac 1 3-Pole RGH316T91WP RGH316T93WP RGH316T92WP RGH316T9WP RGH316T95WP RGH316T96WP Includes 1 A Rating Plug RGH320T91WP9 RGH320T93WP9 RGH320T92WP9 RGH320T9WP9 RGH320T95WP9 RGH320T96WP Includes 2000 A Rating Plug RGH325T91WP53 RGH325T93WP53 RGH325T92WP53 RGH325T9WP53 RGH325T95WP53 RGH325T96WP53 1 Includes 0 A Rating Plug Type RGC with Digitrip 910 Very High Interrupting Capacity U e Max. 690 Vac, 65 kaic at Vac, ka I cu at 15 Vac 1 3-Pole RGC316T91WP RGC316T93WP RGC316T92WP RGC316T9WP RGC316T95WP RGC316T96WP Includes 1 A Rating Plug RGC320T91WP9 RGC320T93WP9 RGC320T92WP9 RGC320T9WP9 RGC320T95WP9 RGC320T96WP Includes 2000 A Rating Plug RGC325T91WP53 RGC325T93WP53 RGC325T92WP53 RGC325T9WP53 RGC325T95WP53 RGC325T96WP53 1 Includes 0 A Rating Plug RP6R16A080 RP6R16A RP6R16A120 RP6R16A125 RP6R16A160 RP6R20A RP6R20A120 RP6R20A125 RP6R20A160 RP6R20A200 RP6R25A160 RP6R25A200 RP6R25A RP6R16A080 RP6R16A RP6R16A120 RP6R16A125 RP6R16A160 RP6R20A RP6R20A120 RP6R20A125 RP6R20A160 RP6R20A200 RP6R25A160 RP6R25A200 RP6R25A RP6R16A080 RP6R16A RP6R16A120 RP6R16A125 RP6R16A160 RP6R20A RP6R20A120 RP6R20A125 RP6R20A160 RP6R20A200 RP6R25A160 RP6R25A200 RP6R25A RP6R16A080 RP6R16A RP6R16A120 RP6R16A125 RP6R16A160 RP6R20A RP6R20A120 RP6R20A125 RP6R20A160 RP6R20A200 RP6R25A160 RP6R25A200 RP6R25A

50 Amperes for UL, CSA & IEC Applications Frame Size RG, Amperes Line and Load Terminals R-Frame circuit breakers use Cu/Al terminals as standard and copper only terminals as an option. Specify if factory installation is required. Table 85. Line and Load Terminals Maximum Breaker Amperes Wire Terminals Rear Connectors Terminal Body Material Aluminum Copper Aluminum Copper Copper Copper Wire Type Cu/Al Cu Cu/Al Hardware Metric Metric Metric AWG/kcmil Wire Range/ of Conductors () 1 () 2 (6) Metric Wire Range mm TA1RDM T1RDM TA2000RDM Order one per pole single terminals individually packed. Order one TA2000RDM kit per 3-poles. number includes bus connection, terminals and hardware for either line side or load side of 3-pole breaker. Note: RG MCCB s have metric threading on line and load conductors. Use RD MCCB s if imperial threading is required. Conductor (Viewed from Rear of Circuit Breaker and Cut Away for Clarity) Metric Metric Metric Conductor (Viewed from Front of Circuit Breaker) B2016RDM B2016RDLM B0RDM Securing Hardware Cu Only Terminal T1RDM (For 1 A Frame Only) OR Breaker Line/Load Conductors Figure. TA2000RD Wire Terminal Note: Order one TA2000RDM kit per 3-poles. number includes bus connection, terminals and hardware for either line side or load side of 3-pole breaker. Base Mounting Hardware Supplied by customer. Handle Extension Included with breaker. Additional handle extensions are available. Table 86. Handle Extension Description Single Handle Extension HEX6 Rear Connector (Cu) B2016RDM B2016RDLM (For % Application) (For 1 A and 2000 A Frames) B0RDM for 0 A Securing Hardware Al/Cu Terminal TA1RDM (For 1 A Frame Only) Figure 3. RD Rear Connector Exploded View Order one per pole (or two per pole if line and load terminals are required) single terminals individually packed. Note: RG MCCB s have metric threading on line and load conductors. Use RD MCCB s if imperial threading is required.

51 800 0 Amperes RG-Frame 51 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. Table 87. Accessories Description Reference 3-Pole -Pole Page Left Center Right Neu. Left Center Right Internal Accessories (Only One Internal Accessory Per Pole) Alarm Lockout (Make/Break) 58 Auxiliary Switch (1A, 1B) 58 Auxiliary Switch (2A, 2B) 58 Auxiliary Switch and Alarm Switch Combination 58 Shunt Trip Standard 58 Undervoltage Release Mechanism 58 External Accessories Base Mounting Hardware 50 Padlockable Handle Lock Hasp 56 Key Interlock Kit 56 Electrical Operator 56 Handle Mechanisms 60 Drawout Cassette 59 Handle Extension 50 Digitrip 310 Test Kit 195 Modifications (Refer to Eaton) Moisture Fungus Treatment Freeze-Tested Circuit Breakers Marine/Naval Application, UL Supplement SA and SB Applicable in indicated pole position Page number is from the MCCB Product Guide PG T.K. Contact Eaton. May be mounted on left or right pole not both Accessory available/modification available

52 Amperes for UL, CSA & IEC Applications Motor Circuit Protectors Motor Circuit 80 Vac, Protectors Selection Guide and Ordering Information Table 88. EG-Frame 80 Vac, Y/37 Vac Maximum, Vdc Maximum Continuous Amperes 3 A B C D E F 7 A B C D E F 15 A B C D E F 30 A B C D E F 50 A B C D E F 70 A B C D E F A B C D E F A B C D E F Cam Setting Motor Full Load Current Amperes MCP Trip Setting MCP HMCPE003A0C HMCPE007C0C HMCPE015E0C HMCPE030H1C HMCPE050K2C HMCPE070M2C HMCPER3C HMCPET3C CSA and UL listed for use with Cutler-Hammer Motor Starters. Motor FLA ranges are typical. The corresponding trip setting is at 13 times the minimum FLA value shown. Where a 13 times setting is required for an intermediate FLA value, alternate cam settings and/or MCP ratings should be used. For dc applications, actual trip levels are approximately 0% higher than values shown. Settings above 10 x I n are for special applications. Where the ampere rating of the disconnecting means cannot be less than 115% of the motor full load ampere rating. Table 89. JG-Frame Vac Maximum, Vdc Maximum Continuous Amperes MCP Trip Range (Amperes) MCP HMCPJA5L HMCPJC5L HMCPJD5L HMCPJF5L HMCPJG5L HMCPJJ5L HMCPJK5L HMCPJL5L HMCPJW5L CSA and UL listed for use with Cutler-Hammer Motor Starters. Table 90. LG-Frame Vac Maximum, Vdc Maximum Continuous Amperes MCP Trip Range (Amperes) MCP HMCPLL6G HMCPLN6G HMCPLR6G HMCPLX6G HMCPLY6G HMCPLP6G HMCPLM6G Equipped with an electromechanical trip device. CSA and UL listed for use with Cutler-Hammer Motor Starters. Note: 800 and 1200 ampere, Vac maximum motor circuit protectors are available as Series C HMCP product.

53 15 0 Amperes for UL, CSA & IEC Applications Motor Protector Circuit Breaker 53 Series G Motor Protector Circuit Breaker (MPCB) Product Description Eliminates need for separate overload relay. Features IEC UL 89 rating. CSA C22.2 No. 5 Phase unbalance protection. Phase loss protection. Hot trip/cold trip. High load alarm. Pre-detection trip relay option. Class 10, 15, 20, 30 protection. Applications Can be used with contactor to eliminate need for overload relay and still create manual motor control. Meets requirement for motor branch protection, including: Disconnecting means Branch circuit short circuit protection Overload protection Table 91. JGMPS and JGMPH Rating and Ampere Range Maximum Rated Current (Amperes) Breaker Type JGMPS JGMPH Breaker Capacity (ka rms) ac Hz IEC Vac I cu I cs Vac I cu I cs Vac I cu I cs Table 92. LGMPS and LGMPH Rating and Ampere Range Maximum Rated Current (Amperes) Breaker Type LGMPS LGMPH Breaker Capacity (ka rms) ac Hz Table 93. JGMP s Continuous Amperes 35 kaic 65 kaic Table 9. LGMP s Continuous Amperes 50 kaic 65 kaic amperes is not a UL listed rating. amperes is the maximum UL or CSA for LG breaker. Note: For pre-trip alarm option, order Style 5721B31G NEMA UL Vac Vac Vac of Poles 3 3 Ampere Range IEC Vac I cu I cs Vac I cu I cs Vac I cu I cs NEMA UL Vac Vac Vac of Poles 3 3 Ampere Range JGMPS050G JGMPSG JGMPS160G JGMPSG LGMPSG LGMPS00G LGMPSG LGMPSG JGMPH050G JGMPHG JGMPH160G JGMPHG LGMPHG LGMPH00G LGMPHG LGMPHG

54 Amperes for UL, CSA & IEC Applications 30 ma Ground Fault (Earth Leakage) Modules 30 ma Ground Fault (Earth Leakage) Modules Clockwise from Left: JG, LG MCCB s Shown with Ground Fault (Earth Leakage) Modules Product Description Eaton offers a 3- and -pole 30 ma ground fault (earth leakage) protection module for JG and LG breakers. The module does not restrict the use of other breaker accessories. CSA and UL-listed modules are available for JG and LG MCCB s. The JG and LG modules are both bottom mounted for circuits up to 160 and amperes (JG), or 00 and amperes for the LG. The module is completely self-contained since the current sensor, relay and power supply are located inside the product. Current pickup settings are selectable from amperes for all IEC-rated modules and JG CSA and UL-listed module, and amperes for the LG CSA and UL-listed modules. Time delays are also selectable from Instantaneous 1.0 seconds for 0.10 ampere settings and above. A current pickup setting of 0.03 amperes defaults to an Instantaneous time setting regardless of the time dial s position. Two alarm contacts come as standard: a 50% pretrip and a % after trip, both based only on earth leakage current levels. Product Selection Table 95. JG-Frame Ground Fault Modules, CSA and UL-Rated (Bottom Mounted, Vac, 50/60 Hz) Amperes Poles ELJBN3150W ELJBN150W ELJBN3W ELJBNW Table 96. JG-Frame Earth Leakage Modules, IEC (Bottom Mounted, Vac, 50/60 Hz) Amperes Poles ELJBE3160W ELJBE160W ELJBE3W ELJBEW Table 97. LG-Frame Ground Fault Modules, CSA and UL-Rated (Bottom Mounted, Vac, 50/60 Hz) Amperes Poles ELLBN300W ELLBN00W ELLBN3W ELLBNW Table 98. LG-Frame Earth Leakage Modules, IEC (Bottom Mounted, Vac, 50/60 Hz) Amperes Poles ELLBE300W ELLBE00W ELLBE3W ELLBEW Figure 5. UL-Rated LG-Frame Earth Leakage Module Faceplate Figure 6. IEC-Rated LG-Frame Earth Leakage Module Faceplate

55 15 0 Amperes for UL, CSA & IEC Applications Special Features and Accessories 55 Special Features and Accessories Internal Accessories Alarm Lockout The alarm switches operate when the circuit breaker is tripped by a short circuit or overcurrent, but also when it is tripped by a shunt trip or undervoltage release. Auxiliary Switches Auxiliary switches are used for signaling and control purposes. The various functions of the auxiliary switches (changeover) are shown in Figure 8. Shunt Trips The shunt trip is used for remote tripping. The coil of the shunt trip is rated only for short-time operation. It is not permissible with the circuit breaker open to apply a continuous opening command to the shunt trip in order to prevent the breaker from closing. This means that interlocking circuits with continuous commands may not be set up with shunt trips. Undervoltage Releases The circuit breaker cannot be closed until the undervoltage release is energized. If the release is not energized, the circuit breaker can only perform an idle switching operation. Frequent idle switching actions should be avoided as they shorten the endurance of the circuit breaker. Accessory Configurations for EG RG Circuit Breakers 3-Pole Circuit Breakers left right 2 AS 1 AS 2 AS U< DI U< DI U< DI U< DI 1 AUX 2 AUX 1 AS 1 AS + 1 AUX 1 AUX 2 AUX 2 AUX For NG Circuit Breaker Only. Figure 7. Internal Accessory Configurations -Pole Circuit Breakers left right 2 AS 1 AS 2 AS U< DI U< DI U< DI U< DI AUX AUX AUX AUX AUX AUX U< 2AS 2AS 2AS U< 2AS 2AS 2AS U< DI AUX AS 1 AUX 2 AUX 1 AUX 2 AUX 2 AUX = Shunt Trip or Undervoltage Release or DI Module (if Built-In) = Auxiliary Switch = Alarm Switch 1 AS 1 AS + 1 AUX = For R-Frame Circuit Breakers Only Figure 8. Contact Making by the Auxiliary and Alarm Switches as a Function of the Switching Position of the Circuit Breaker

56 Amperes for UL, CSA & IEC Applications Special Features and Accessories Special Calibration Special non-ul listed calibrations are available for certain ambient temperatures other than 0ºC and for frequencies other than 50/60 Hz or dc. Reduced interrupting ratings will apply for 00 Hz applications. 50ºC Calibration Note: Breakers equipped with electronic trip units can operate reliably in ambient temperatures of 50ºC. Add suffix V3 to NG MCCB s to remove standard 0 C labeling. Add suffix V to catalogue number for complete thermal magnetic breaker when ordering listed ampere ratings for breakers to be used in 50ºC ambients. 50ºC ambient MCCB s are not UL listed. Contact Eaton for availability. Moisture-Fungus Treatment All Cutler-Hammer Circuit Breaker cases are moulded from glass-polyester which does not support the growth of fungus. Any parts which are susceptible to the growth of fungus will require special treatment. Order by description. Table 99. Calibrations and Treatment Description Frame EG JG LG NG RG Special Calibration Moisture-Fungus Treatment Table. External Accessories and Test Kit Description Fit Frame Type EG JG LG NG RG External Accessories Non-Padlockable Field EFHB LKD Handle Block Padlockable Field EFPHB Handle Block Padlockable Handle Field EFPHBOFF FJPHBOFF LBHPOFF Block Off-Only Padlockable Handle Field EFPHL FJPHL LPHL PLK5 HLK6 Lock Hasp Padlockable Handle Field EFPHLOFF FJPHLOFF LPHLOFF PLK5LOFF HLK6LOFF Lock Hasp Off-Only Kirk Key Interlock Kit Field KYKJG KYKLG KYK KYK6 Castell Key Interlock Kit Field CTKJG CTKLG CYK CYK6 Slide Bar Interlock Field EFSBI FJSBI LGSBI SBK5 Walking Beam 3-Pole EG3WBI JG3WBI LG3WBI WBL5 WBL6 Interlock -Pole EGWBI JGWBI LGWBI WBL5 Electrical Operator 120 Vac MOPEG20C EOPFJ20C EOPLG20C EOP5T07 EOP6T08 20 Vac MOPEG20C EOPFJ20C EOPLG20C EOP5T11 EOP6T11K 2 Vdc MOPEG8D EOPFJ2D EOPLG2D EOP5T21 EOP6T19K 8 Vdc MOPEG8D EOPFJ8D EOPLG8D EOP5T22 EOP6T21K 125 Vdc MOPEG20C EOPFJ20C EOPLG20C EOP5T26 Plug-In Adapters 3-Pole PAD3E PAD3J PAD3L PAD53 -Pole PADE PADJ PADL PAD5 Rear Connecting Studs Field 3P LRCS3WK P LRCSWK Test Kit Electronic Portable Test Kit 120 V 230 V Provision only. See Page 57 for bolt projection dimensions. Castell bolt mounting hole must be 10 mm. Requires two breakers. N/A N/A MTST120V MTST230V Contact Eaton for availability of operators for EG- Frames. Contact Eaton for catalogue numbers. MTST120V MTST230V STK2 STK2

57 Key Interlock Kit (Lock Not Included) Key Interlock Kit Product Description The Key Interlock is used to externally lock the circuit breaker handle in the OFF position. When the key interlock is locked, an extended deadbolt blocks movement of the circuit breaker handle. Uniquely coded keys are removable only with the deadbolt extended. Each coded key controls a group of circuit breakers for a given specific customer installation. The key interlock assembly is Underwriters Laboratories listed for field installation under UL File E7819 and consists of a mounting kit and a purchaser supplied deadbolt lock. The mounting kit comprises a mounting plate, which is secured to the circuit breaker cover in either the left- or right-pole position, key interlock mounting screws, and a wire seal. Specific mounting kits are required for individual key interlock types. Ordering Information Key interlock mounting kits are for field installation only. Select mounting kit catalogue numbers to match type of lock used. Key interlocks are supplied by customer Amperes for UL, CSA & IEC Applications Mechanical Interlocking Devices Key Interlock Kit Lock Manufacturer Lock Type Bolt Projection in Withdrawn Position in Inches (mm) Kit JG-Frame Superior B (9.5) KYKJG Kirk Square D F SF.38 (9.5) None Castell K or QK.38 (9.5) CTKJG LG-Frame Superior B (9.5) KYKLG Kirk Square D F SF.38 (9.5) None Castell K or QK.38 (9.5) CTKLG NG-Frames Superior Kirk Square D B F SF.38 (9.5).38 (9.5) None KYK Castell K or QK.38 (9.5) CTK RG-Frame Superior B (25.) KYK6 Kirk F 1.0 (25.) Square D SF 1.0 (25.) Castell K or QK 1.0 (25.) CTK6 When ordering Castell Interlock, it is necessary for customer to specify that the mounting bolt holes must be 10 mm in diameter. 57

58 Amperes for UL, CSA & IEC Applications Accessories Table 101. Accessories Description Pole Frame Location EG, JG & LG NG RG Field Fit Kit s Alarm Lockout Make/Break Left A1L5LPK Make Right ALM1M1BEPK A1L5RPK A1L6RPK 2 Make/2 Break Left A2L5LPK Right ALM2M2BEPK A2L5RPK A2L6RPK Break Auxiliary Switch 1A, 1B Left A1X5LPK Right AUX1A1BPK A1X5RPK a b 2A, 2B 3A, 3B Left Left A2X5LPK A3X5LPK Right Right AUX2A2BPK A2X5RPK A3X5RPK A2X6RPK A, B Left Auxiliary Switch / Alarm Lockout Shunt Trip Standard Shunt Trip Low Energy ST a Undervoltage Release Mechanism UV All accessories mount in the RH cavity which will accept one each of shunt trip, UVR, auxiliary switch and alarm switch. Part number for JG and LG is ALM1M1BJPK. Part number for JG and LG is ALM2M2BJPK. Right AX6RPK Left AA115LPK Right AUXALRMEPK AA115RPK 120 Vac Left SNT120CPK SNT5LP11K Right SNT6P11K 20 Vac Left SNT120CPK SNT5LP11K Right SNT6P11K 2 Vdc Left SNT060CPK SNT5LP03K Right SNT6P03K 8 Vdc Left SNT060CPK SNT5LP23K Right SNT6P23K 380 Vac Left SNT80CPK Right 220 Vdc or Vac SNT5LP1K SNT6P1K 80 Vac SNT5LP18K SNT6P18K Left LST5LPK Right LST6RPK Vac Left UVR120APK UVH5LP08K Right UVH6RP08K Vac Left UVR20APK UVH5LP11K Right UVH6RP11K 2 Vdc, Vac Left UVR02CPK UVH5LP21K Right UVH6RP21K 8 60 Vdc Left UVR08DPK UVH5LP23K Right UVH6RP23K 12 Vdc, Vac Left UVR012CPK Right 8 60 Vac Left UVR08APK UVHLP05K Right UVHRP05K 120 Vdc Left UVR125DPK UVHLP26K Right UVHRP26K 220 Vdc Left UVRDPK UVHLP28K Right UVHRP28K Vac Left UVR80APK UVHLP29K Right UVHRP29K 525 Vac Left UVRAPK Right 12 Vdc Left UVHLP20K Right UVH6RP20K 12 Vac Left UVHLP02K Right UVH6RP02K Part number for JG and LG is AUXALRMJPK Vdc, 50/60 Hz Vdc, 50/60 Hz. Part number for 2 Vac rated UVR is UVH5LP03K. Part number for 2 Vac rated UVR is UVH6RP03K.

59 15 0 Amperes for UL, CSA & IEC Applications Plug-in Blocks and Drawout Cassettes 59 Plug-in Blocks Plug-in adapters simplify installation and front removal of circuit breakers. Plug-ins are available for rear connection applications on 3- and -pole circuit breakers. Trip on drawout interlock kits are included. Stabs for EG, JG and LG plug-ins rotate 90 for flexible installation. Use terminal shields for IP30 protection. LG Breaker with Plug-in Block Product Selection Table 102. Plug-in Blocks Breaker Poles Frame EG-, JG- and LG-Frame Plug-in Blocks EG EG JG JG LG LG PAD3E PADE PAD3J PADJ PAD3L PADL Trip-on Drawout Interlock Kit EG JG LG 3, 3, 3, Terminal Shields IP30 EG EG JG JG LG LG PIILEG PIILJG PIILLG EFTS3K EFTSK FJTS3K FJTSK LTS3K LTSK Position Switch EG 3, PADILE JG 3, PADILJ LG 3, PADILL Included with plug-in block. Trips the breaker when breaker is removed from plug-in block. Drawout Cassette Drawout Cassette JG and LG Drawout Cassettes The Drawout Cassette is available for use with JG, LG and NG, 3- and -pole breakers. Also available are drawout cassettes for use with the standard 3-pole 50 and 65kA/ Vac, 1 ampere and 2000 ampere RG circuit breakers. The cassettes consist of two separate components: the movable mechanism, which attaches to the breaker, and the stationary mechanism, which houses in the cassette. The stationary mechanism is shipped separately for the RG frame breakers. For the JG, LG and NG drawout cassettes, all necessary parts for installation are included in the one catalogue number. Features of the drawout cassettes for the JG, LG and NG include: Trip on drawout Breaker will trip if it is in the ON position when withdrawn from the cassette. Secondary Terminal Block The drawout cassettes include a secondary terminal block for easier access when wiring low voltage accessories, including shunts and undervoltage releases. The drawout mechanism has three primary positions: Connected The breaker is fully connected to the primary stabs and secondary contacts. Disconnected Both the primary stabs and the secondary contacts are disconnected. Withdraw The breaker can be removed from the cassette. Table 103. RG Drawout Cassette Description 50 ka/ Vac Version Movable RD20DOM Mechanism Stationary Mechanism RD20DOS RD20DOSS 65 ka/ Vac Version Movable RDC20DOM Mechanism Stationary Mechanism RDC20DOS RDC20DOSS List price included in price of the stationary mechanism. Without shutters. With shutters. Movable mechanism must be ordered with RG circuit breaker and is shipped mounted to circuit breaker frame. Stationary mechanism is ordered separately. Table 10. JG, LG and NG Drawout Cassettes Breaker Poles Frame JG 3 JG3DOM JGDOM LG 3 LG3DOM LGDOM NG 3 NG3DOM NGDOM

60 Amperes for UL, CSA & IEC Applications Handle Mechanisms Handle Mechanisms Overview Handle mechanisms are used to operate moulded case circuit breakers, moulded case switches and motor circuit protectors. They are available in three basic configurations Flange Mounted, Through-the-Door and Direct (Close-Coupled) providing safe, dependable operation and ease of installation. Flange Mounted Flex Shaft Through-the-Door Universal Rotary Direct (Close Coupled) Universal Direct Euro IEC Handle mechanisms are typically used on enclosed circuit breakers, control panels and motor control centers in many different applications. Eaton s Electrical Group has a handle mechanism for virtually any need. Flange Mounted Handle Mechanisms The Flex Shaft Flange Mounted handle mechanisms mount on the flange of an enclosure door. The Flex Shaft is an extra heavy-duty mechanism that includes a flexible shaft in various lengths, 3 feet (0.9 m) through 10 feet (3 m) for use with various size enclosures. The Flex Shaft handle will accept up to three padlock shackles, each with a maximum diameter of 3/8 inch (9.5 mm). Can be used with NEMA 12 fabricated enclosures. An optional handle is available for Flex Shaft that is suitable for use with NEMA environments. Flex Shaft comes preset from the factory, requiring only minor field adjustments on installation, which takes about 10 minutes a significant time savings compared to installation of other types of flange handle mechanisms. The Flex Shaft mechanism also takes up less interior enclosure space than competitive designs and the handle fits standard flange cutouts. Flex Shaft handle can be remotely mounted from breaker, where an operator can use it by funneling the cable through conduit. Flex Shaft is UL listed under File E6893 and meets CSA requirements. Note: NEMA X handle mechanisms are available. Add Suffix X to the complete. i.e., EHMFS03X, JHMFS03X, LHMFS0X, F5S0CXI, F6S0X. Note: When selecting the length of shaft, ensure minimum bending radius of inches (101.6 mm) is maintained to operate properly. The standard method of shipment includes the mechanism preset at the factory; however, minor field adjustments may be required. Flex Shaft Ordering Information Table 105. Flex Shaft Ordering Information Breaker Flexible Shaft Length in Feet (m) Frame 2 (0.61) 3 (.9) (1.2) 5 (1.3) 6 (1.8) 7 (2.1) 8 (2.) 9 (2.7) 10 (3.1) EG JG LG NG RG EHMF02 N/A N/A N/A N/A EHMFS03 JHMFS03 N/A N/A EHMFS0 JHMFS0 LHMFS0 F5S0CI F6S0 EHMFS05 JHMFS05 F5S05CI F6S05 EHMFS06 JHMFS06 F5S06CI F6S06 EHMFS07 JHMFS07 LHMFS07 N/A N/A EHMFS08 JHMFS08 N/A N/A EHMFS09 JHMFS09 N/A N/A EHMFS10 JHMFS10 LHMFS10 F5S10CI N/A Handle mechanism supplied with C371 handle. Handle mechanism supplied with AMT handle. Note: 3-Pole only for EG, 3 and Pole for JG and LG. Note: EG, JG and LG can be left or right-hand mounted. Flex Shaft Accessories (E- through R-Frame) Table 106. NEMA 12 Safety Door Hardware for Flex Shaft Handle Length in Inches (mm).00 (101.6) 6.00 (152.) Roller Latch C361KJ C361KJ6 C361KR Customer: Consult with box manufacturer for correct door hardware and any adapters required for assembly. The 1/-inch x 1/2-inch (6.35 x 12.7 mm) standard mill rectangular locking bar is not supplied with these kits. Third roller latch for use with - or 6-inch (101.6 or 152. mm) handle when 3 point latching is required. Table 107. NEMA IP Crossover NEMA Type IP Type 1 3R 12 /X IP20 IP55 IP5 IP66

61 15 0 Amperes for UL, CSA & IEC Applications Handle Mechanisms 61 Through-the-Door Handle Mechanisms Universal Rotary The Cutler-Hammer Universal Rotary is suitable for use with NEMA 12 enclosure types. An optional NEMA /X handle mechanism is also available. All rotary handle mechanisms include a handle Lock Off, to prevent turning the breaker ON while in the OFF position. All Rotary handles indicate ON/OFF/Tripped/Reset positions, however, Universal Rotary has the added feature of international markings for ON (I) and OFF (O). The Universal Rotary is made of moulded material. Inside handle is lockable. The Universal Rotary mechanisms for EG, JG and LG MCCB s can be operated by hand with the door open or locked off to prevent operation with the door open. For the NG-Frame MCCB s, a Cutler-Hammer Rotary with a metal handle (Table 109) is also available. /X Handle Mechanism Table 108. Universal Rotary Ordering Information Shaft Length in Inches (mm) EG-Frame 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) JG-Frame 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) LG-Frame 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) 6.00 (152.) (30.8) 2.00 (609.6) NG-Frame 6.00 (152.) 6.00 (152.) 6.00 (152.) (30.8) (06.) Handle Color Black Black Black Red Red Red Black Black Black Red Red Red Black Black Black Red Red Red Black Black Black Red Red Red Black Black Black Red Red Red Black Black Black Red Red Red Black Black Black Black Black NEMA Rating 1, 12 1, 12 1, 12 1, 12 1, 12 1, 12, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R 1, 12 1, 12 1, 12 1, 12 1, 12 1, 12, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R 1, 12 1, 12 1, 12 1, 12 1, 12 1, 12, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R, X, 3R 1 1, X, 3R, X, 3R, X, 3R Complete EHMVD06B EHMVD12B EHMVD2B EHMVD06R EHMVD12R EHMVD2R EHMVD06BX EHMVD12BX EHMVD2BX EHMVD06RX EHMVD12RX EHMVD2RX FJHMVD06B FJHMVD12B FJHMVD2B FJHMVD06R FJHMVD12R FJHMVD2R FJHMVD06BX FJHMVD12BX FJHMVD2BX FJHMVD06RX FJHMVD12RX FJHMVD2RX KLHMVD06B KLHMVD12B KLHMVD2B KLHMVD06R KLHMVD12R KLHMVD2R KLHMVD06BX KLHMVD12BX KLHMVD2BX KLHMVD06RX KLHMVD12RX KLHMVD2RX HMVD5B HMVD5BT WHM5R06X WHM5R12X WHM5R16X 2.00 (609.6 Black, X, 3R WHM5R2X RG-Frame 9.00 (235.0) Black 1 HMVD6B Complete catalogue number includes handle, mechanism, shaft and mounting hardware. Same as HMVD5B, except uses R-Frame T handle. EG-Frame JG & LG-Frames (JG Shown) Table 109. Cutler-Hammer Rotary Ordering Information NG-Frame Shaft Length Handle Complete in Inches (mm) Color 6.00 (152.) (30.8) (06.) 2.00 (609.6) Black Black Black Black NEMA 1, 3R, 12 WHM5R06 WHM5R12 WHM5R16 WHM5R2 NEMA /X WHM5R06X WHM5R12X WHM5R16X WHM5R2X Complete catalogue number includes handle, mechanism, shaft and mounting hardware.

62 Amperes for UL, CSA & IEC Applications Handle Mechanisms Direct (Close-Coupled) Handle Mechanisms The Universal Direct handle mechanism is designed exclusively for the new Cutler-Hammer EG, JG and LG circuit breakers. It is available as standard with a door interlock to prevent opening the enclosure while the circuit breaker is in the ON position. It is also available without a door interlock. The Universal Direct handle mechanism is UL 89 listed, IEC /2 and meets CSA requirements. The Euro IEC Direct handle mechanism is designed for NG and RG MCCB s. The Euro IEC Direct handle mechanism is Universal Direct (EG LG) Direct (Close-Coupled) Handle Mechanisms mount directly to the circuit breaker. They are used in shallow enclosures where the standard variable depth Through-the-Door type mechanism is not practical or cannot be used. They are typically for applications where high volume, standardized enclosures are being fabricated. Table 110. Universal Direct Ordering Information Frame White Handle Color Red Handle Color with Interlock without Interlock without Interlock EG JG LG EHMCCBI Table 111. Euro IEC Direct Ordering Information Frame Black Handle EHMCCB JHMCCB LHMCCB EHMCCR JHMCCR LHMCCR NG RG HMVD5B HMVD6B