Kulka Military Class (A-A-59125) / (MIL-T-55164*)
|
|
- Fay Carter
- 5 years ago
- Views:
Transcription
1 ( ) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting holes are covered with molded-in reinforcement straddle plates. 37T / MIL-T Terminal Type Voltage Current Wire & Lug Information Information Military/Navy Terminal locks Class Spec # Description Max Dielectric Max Screw RECMD Max MS17143 Max Lug RECMD Torque Rated with Test Rated Size Wire Size Lug # Width Lb-In (N-M) 37 T / 1 Double Screw 300 V 3000 V 15 mp #6 #16 WG -11 RMS RMS 60 Hz [7.2] [ ] 38 T / 2 Double Screw 600 V 3400 V 20 mp #6 #14 WG -14 RMS RMS 60 Hz [ ] 39 T / 3 Double Screw 600 V 4000 V 30 mp #8 #10 WG -9 RMS RMS 60 Hz [10.4] [ ] 40 T / 4 Single Screw 300 V 3000 V 7.5 mp #6 #18 WG -10 Feed Thru RMS RMS 60 Hz [7.2] [ ] 41 T / 5 Single Screw 600 V 3400 V 10 mp #6 #16 WG -14 Feed Thru RMS RMS 60 Hz [ ] 42 T / 6 Single Screw 600 V 4000 V 15 mp #8 #14 WG -8 Feed Thru RMS RMS 60 Hz [10.4] [ ] *Marathon Special Products manufactures terminal blocks that are constructed to meet MIL-T-55164C and Mil standard , dated September 16, 1997, superceeds MIL-T-55164C. We will continue to supply the same parts for this spec. The CID identifier will be the same class number as for MIL-T-55164C. The old MIL-T-55164C standard required Group and Group testing. The Group testing was required every three years. Since the new standard does not require Group testing, we have elected to discontinue this test. We will continue to do Group testing. The following blocks are effected by this change: Class/Spec # 37T / 1 38T / 2 39T / 3 40T / 4 41T / 5 42T / 6
2 ( ) / (MIL-T-55164) 37T-/40T- Series 300 Volts C/DC Specifications: ase, Valox 420-SEO, Grey Color, 130 C Closed ack Design Screws, rass Nickel Plate, 6-32 inder Head, Slotted Terminals, rass Nickel Plate, Ultrasonically Inserted 2-20 Poles, Consult Customer Service for Longer Lengths 3/8 Centers Flammability Rating 94 V-O Wire Size #16 15 mps Parts are supplied with end plates RoHS Compliant 37T04 40T04 Catalog Number Dimensions Number of Poles 37T T T T T T T T T T T T T T T T T T T Hardware Options: Lug Types (Commercial): 3/4 ST 600 = Half Solder See Page 102 ST600 = Full Solder See Page 102 Feed-Thru Hardware Options: Long Feed-Thru Solder 40T Only ccessories: (Jumper Commercial Grade) Marking Strips = MS, MS, MSC See Page 134 Jumper = J600, 600RJ, 600RJ(S) See Page 103 Service Options: Consult Customer Service.38 [9.5].17 [ 4.3].48 [12.1] [8.3] Military/Navy Terminal locks.87 [22.1] #6-32 X.23[5.7] D HD SCREW
3 Military/Navy Terminal locks 37T-Military Class ( /1)/(MIL-T-55164/1) Plastic: Grade F temperature rating 155 C per MIL-M-14 Screws: rass per QQ-W-321, nickel plated per QQ-N-290 Terminal Plates: rass per QQ--613, nickel plated per QQ-N Rated voltage (maximum): 300 volts Current rating: 15 mps D.W.V.: 3000 volts RMS.30 [7.6] 38T-Military Class ( /2)/(MIL-T-55164/2) Plastic: Grade F temperature rating 155 C per MIL-M-14 Screws: rass per QQ-W-321, nickel plated per QQ-N-290 Terminal Plates: rass per QQ--613, nickel plated per QQ-N-290 Current rating: 20 mps D.W.V.: 3400 volts RMS [8.4].38 [9.5] #6-32 X.23[5.7] D HD SCREW.44 [11.1] #6-32 UNC-2 x.25[6.3] Kulka Military Class ( ) / (MIL-T-55164) [ 4.2].20 [ 5.0] [10.7].82 [20.8].46 [11.6] [8.3].88 [22.2] [14.2].39 [9.9] 1.13 [28.6] Designation of poles 37T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F T 19 F T 20 F T 21 F T 22 F T 23 F T 24 F T 25 F T 26 F T 27 F T 28 F T 29 F T 30 F T 31 F Designation of poles 38T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F T 19 F T 20 F T 21 F T 22 F T 23 F
4 ( ) / (MIL-T-55164) 39T-Military Class ( /3)/(MIL-T-55164/3) Plastic: Grade F temperature rating 155 C per MIL-M-14 Screws: rass per QQ-W-321, nickel plated per QQ-N-290 Terminal Plates: rass per QQ--613, nickel plated per QQ-N-290 Current rating: 30 mps D.W.V.: 4000 volts RMS.20 [5.2].43 [10.8] [14.3] [ 5.7] [12.7] [23.8] [17.4].45 [11.4] 1 [33.3] Designation of poles 39T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F #8-32 UNC-2 x 1 D HD SCREW 40T-Military Class ( /4)/(MIL-T-55164/4) Same as 37 T Class Hardware: Lug, rass per QQ--613, tin plated Rated voltage (maximum): 300 volts Current rating: 7.5 mps D.W.V.: 3000 volts RMS [7.6].38 [9.5] #6-32 UNC-2 x D HD SCREW FEED THRU SOLDER LUG [ 4.2].44 [11.3].46 [11.6] [8.3].88 [22.2] Designation of poles 40T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F T 19 F T 20 F T 21 F T 22 F T 23 F T 24 F T 25 F T 26 F T 27 F T 28 F T 29 F T 30 F T 31 F Military/Navy Terminal locks
5 ( ) / (MIL-T-55164) 41T-Military Class ( /5)/(MIL-T-55164/5) Same as 38 T Class Hardware: Lug, rass per QQ--613, tin plated Current rating: 10 mps D.W.V.: 3400 volts RMS [8.4] FEED THRU SOLDER LUG.44 [11.1] #6-32 UNC-2 x.25[6.3] D HD SCREW.20 [ 5.0] [10.7].82 [20.8] [14.2].39 [9.9] 1.13 [28.6] Designation of poles 41T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F T 19 F T 20 F T 21 F T 22 F T 23 F Military/Navy Terminal locks 42T-Military Class ( /6)/(MIL-T-55164/6).20 [5.2] Same as 39 T Class Hardware: Lug, rass per QQ--613, tin plated Current rating: 15 mps D.W.V.: 3400 volts RMS [14.3] [ 5.7] [17.4].45 [11.4] Designation of poles 42T 02 F T 03 F T 04 F T 05 F T 06 F T 07 F T 08 F T 09 F T 10 F T 11 F T 12 F T 13 F T 14 F T 15 F T 16 F T 17 F T 18 F [23.8] 1 [33.3].43 [10.8] FEED THRU SOLDER LUG [12.7] #8-32 UNC-2 x 1 D HD SCREW
6 ( ) / (MIL-T-55164) *Solder Hardware Dimensions are not to Mil Spec 37TLD (Commercial Equivalent) 1 [31.0].75 [19.1] [17.5] 1 [31.0].03 [.76] 37TLS (Commercial Equivalent).45 [11].23 [5.9].922 [23].03 [0.8] [4.1] Ø.09 [2.3] (2 HOLES) Ø.144 (2 HOLES) This is an assembly of the 37T Class Terminal oard and a two-sided terminal lug (ST600). vailable in lengths from 2 terminals through 31 terminals. Lugs are brass, tin plated. [4.1] Ø HOLES Ø.09 HOLE [2.3] This is an assembly of the 37T Class Terminal oard and a one-sided terminal lug (3/4 ST600). vailable in lengths from 2 terminals through 31 terminals. Lugs are brass, tin plated. 38TLD (Commercial Equivalent) 1.58 [40.1] [23.8] 1.58 [40.1] 38TLS (Commercial Equivalent).58 [15].32 [8.1] 1.17 [29.7] [11].84 [21.4].036 [.91].036 [.91] [11] This is an assembly of the 38T Class Terminal oard and a two-sided terminal lug (ST601). vailable in lengths from 2 terminals through 23 terminals. Lugs are brass, tin plated. 39TLD (Commercial Equivalent) 1.85 [47.0] 1.85 [47.0] 1 [26.9] Ø.13 2-HOLES Ø.15 2-HOLES [3.8] [23.9].037 [0.9] This is an assembly of the 38T Class Terminal oard and a one-sided terminal lug (3/4 ST601). vailable in lengths from 2 terminals through 23 terminals. Lugs are brass, tin plated. Ø.15 2-HOLES [3.8] Ø.13 2-HOLES 39TLS (Commercial Equivalent) [18].39 [9.9] 1.37 [34.8] [13].037 [0.9] Military/Navy Terminal locks.41 [10].09 [2.4] [13] Ø.13 2-HOLES Ø HOLES [4.5].41 [10].09 [2.4] Ø.13 HOLE Ø HOLES [4.5] This is an assembly of the 39T Class Terminal oard and a two-sided terminal lug (ST602). vailable in lengths from 2 terminals through 18 terminals. Lugs are brass, tin plated. This is an assembly of the 39T Class Terminal oard and a one-sided terminal lug (3/4 ST602). vailable in lengths from 2 terminals through 18 terminals. Lugs are brass, tin plated. To ensure solderability, use within six (6) months.
7 Marking Strips Marking Styles MS, MS, MSC Top Surface of Marking Strip MS MS MSC (blank) ottom Surface of Marking Strip MS MS (blank) MSC (blank) Military/Navy Terminal locks Requirements: Type Mount: Dimensions: Material: Marking: ottom Only See Page 110 for Charts Type GME Marking Strips shall be Marked in ccordance with CID (can be provided to MIL T55164) single letter shall be inserted in the above type designation to specify the marking style (, or C). oth the front and the back of the marking strips shall be marked as indicated. The numbers shall be marked at a 45 ± 2 angle with reference to the side of the marking strip, as indicated. Type MSC37T (blank single sided marking strip) shall have the same dimensions as type MS.
Kulka Military Class (A-A-59125)/(MIL-T-55164)
Kulka Military Class (A-A-59125)/(MIL-T-55164) Military Class: Closed Back These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
More informationStudded Power Feed Thru Terminal Blocks
ST722 Series The Studded Power Feed Thru were designed for applications where power feed thru is necessary using standard double hole lugs with.625 spacing. These terminal blocks are available in three
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationFuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More informationDIN-Rail terminal blocks with ratings up to 200 ka SCCR. Multiple bridging options for point-of-use configuration. Connector products 10.
Connector products 10 DIN-Rail terminal blocks with ratings up to 200 ka SCCR Section page Description Compact rail and panel mount blocks NDN DIN-Rail and feed through blocks 2-3 N512, NFT2, NFT3, NC3,
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More information*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
More information2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationWire connection products
Wire connection products Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks...282-283 N512-BK 12-Pole block... 284 NFT2-WH 2-Pole block... 284 NFT3-3-pole block... 284
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More information4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
More informationConnectors. Section Contents
Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks........ 304-305 N512-BK 12-Pole block......................... 306 NFT2-WH 2-Pole block......................... 306
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationELAPSED TIME INDICATORS
ELAPSE TIME INICATORS AC SERIES: SUBMINIATURE ELAPSE TIME INICATORS & Models 21, 25, 91, 92 & 95 See the Military Cross Reference for military qualified models, pages 82-84. The AC meter was developed
More informationSeries 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
More informationFuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationELAPSED TIME INDICATORS
ELAPSE TIME INICATORS C SERIES: SUBMINIATURE Models 16, 16 & 46 See the Military Cross Reference for military qualified models, page 82. The Electrodynamics C meter was developed to meet the difficult
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationSERIES 16, 18, 26 & 19N MICROSWITCH RANGES
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationor 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationPower rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationMS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationPRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationPart Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More informationVoltage B = 50 C = 100. Temperature Characteristic
MIL-PRF-123 HOW TO ORDER Military Type Designation: Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability M123 A 01 BX B 103 K C Mil-Spec Number Modification
More informationClass gg/gl, 690Vac, 2 to 500 Amps, Sizes 000 to 3 NH Series
Description: A range of Class gg/gl square bodied industrial fuse links for a variety of applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhg(size)b-690 gg/gl Fuse Size: 000 to
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationVolts: 600V Amps: up to 30A limited by conductor size Withstand: 200kA RMS Sym. Operating and storage temperature:
Technical Data 7 Effective December 05 Supersedes October 05 USSMNN SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Symbol: HE* Description: The ussmann series
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationMINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
More informationTP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
More informationMIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS
CONNECTING YOUR ENGINEERING PASSION Series MIL-DTL-353 Micro-D MILITARY STYLE CONNECTORS MILITARY & DEFENSE EDITION Lightweight, High-Density Connectors Pre-Assembled Wire Harnesses PCB Angled & Straight
More informationup to 30A limited by conductor size Operating and storage temperature:
Technical Data 7 USSMNN Effective pril 07 Supersedes December 05 SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Use these part numbers to order insulating
More informationPin & Sleeve Devices. Series and IEC Configuration
Pin & Sleeve Devices Series 309-1 and 309-2 IEC Configuration Leviton s are designed for high quality distribution of electrical power in industrial facilities. These devices are ideal where heavy electrical
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationHigh Performance Thermal-Magnetic Circuit Breakers 410/520/
High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism
More informationPin and Sleeve Devices Mechanical Interlocks
Section E Pin and Sleeve Devices Mechanical Interlocks Index Product Page IEC Pin and Sleeve Watertight Devices Features and enefits...e-2 Ordering Information Chart...E-4 ack oxes...e-6 ccessories...e-7
More information