Bussmann series IEC cylindrical fuses

Transcription

1 IEC and ritish Standard fuses 5 Contents ussmann series IEC cylindrical fuses Complete portfolio of 8-22 mm diameter Class am and Class gg cylindrical fuses for industrial applications escription Fuses Section page CSA Type P and fuses (CN, CS and PON) 2 HRC Form II Class C fuses (CGL) 3 HRCI industrial ceramic body fuses HRCI-CA (CIF2) HRCI-C (CIF06) HRCI-Misc. Type K (CIH, CIK and CIL) 5 HRC Form II current-limiting fuses (H07C, K07C, L4C, M4C, L09C, M09C, P09C, PC, RC) S88 Part fuses S88 SS, NS, ES ST, NIT, AAO, AO, OS, CEO, EO AC, A, C,, C,, E, EFS EF, FF, FG, GF, GG, GH IN Type iazed (6, 27, 33, 25) IN Type N Neozed (NZ0, NZ02) NH HRC fuses (NHG) 0- JKS-700 fast-acting, current limiting UL Recognized and CSA Component Acceptance 700 Vac fuses up to 60 amps NH fuse blocks and accessories (S, T) 2 Fuses continued IEC industrial fuses with and without indicator/striker Class gg ferrule (C0G, C4G, C22G) 3 Class am ferrule (C0M, C4M, C22M) 4 HRC fuse holders CAMaster SAFEloc Red Spot IEC and ritish Standard fuses USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-

2 5 IEC and ritish Standard fuses CN, CS and PON CSA Type P and fuses CSA time-delay Type and P fuses. imensions in (mm) A 250 Vac (CN and PON) 600 Vac (CS) Up to 60 A C A Amps A F IR 0 ka minimum 70 to 600 A E CSA Certified, Class 42-0, File 53787, CE Features Economical fuse in a variety of ratings for applications not requiring time-delay Typical applications Lighting, heating and other circuits not subject to temporary surges and where available short-circuit current are relatively low * Catalog symbol Available amp ratings Time-elay CSA Type "" fuses CN** CS 250 Vac 600 Vac One-time CSA Type "P" fuses 0, 2, 5, 20, 25, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 25, 50, 75, 200, 225, 250, 300, 350, 400, 450, 500, 600 0, 2, 5, 20, 25, 30, 35, 40, 45, 50, 60, 70,, 90, 00, 0, 25, 50,75, 200, 225, 250, 300, 350, 400, 450, 500, 600 PON 250 Vac 5, 20, 25, 30, 35, 40, 45, 50, 60 * To order, specify catalog symbol and amp rating, e.g., CN30, CS0 or PON40. ** elow 0 amps, use FRN-R. elow 0 amps, use FRS-R. Amps A C E F CN/PON 250 Vac Up to (5) 0.6 (4) (76) 0.8 (2) (49).0 (25) 0. (3) 0.8 (9) (85).4 (35) 4. (05) 0.2 (5). (29) (29).9 (48) 4.6 (8) 0.3 (6).6 (4) (264) 2.3 (57) 5.2 (32) 0.3 (6) 2 (5) CS 600 Vac Up to (27) 0.8 (2) (40). (27) (200).0 (25) 0. (3) 0.8 (9) (245).4 (35) 6. (6) 0.2 (5). (29) (295).9 (48) 7. (8) 0.3 (6).6 (4) (340) 2.3 (57) 8.2 (208) 0.3 (6) 2 (5) Recommended fuse blocks * Fuse amps Up to 30 HM25030-(poles) HM60030-(poles) HM25060-(poles) HM60060-(poles) HM2500-(poles) HM6000-(poles) HM25200-(poles) HM60200-(poles) HM25400-(poles) HM60400-(poles) HM25600-(poles) HM60600-(poles) * To order, specify, 2 or 3 poles, e.g., HM _. See data sheets 0289 (30-60 A) and 392 ( A) for available terminals. ata sheet no USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

3 IEC and ritish Standard fuses 5 CGL HRC Form II Class C fuses Current-limiting HRCII-C fuses designed to withstand inrush currents on typical motor start-ups while offering high current limitation in the short-circuit region. See drawings for dimensions. 600 Vac 250 Vdc (-30 A) Amps -600 A IR 200 ka 40 ka C CSA Certified, Class 422,File 53787, CE (amps) CGL- CGL-25 CGL- CGL-225 CGL-2 CGL-30 CGL-90 CGL-250 CGL-3 CGL-35 CGL-00 CGL-300 CGL-4 CGL-40 CGL-0 CGL-350 CGL-6 CGL-45 CGL-25 CGL-400 CGL-0 CGL-50 CGL-50 CGL-450 CGL-5 CGL-60 CGL-75 CGL-500 CGL-20 CGL-70 CGL-200 CGL-600 Features imensions in (mm) CGL (5.56) CGL (50.8) 2. (7.04) 3.3 (84.4) 0.22 (5.56) 2.0 (50.8) 2. (7.04) 3.5 (88.9) (8.7) CGL (5.56) 0.22 (5.56) 2.39 (60.72) 3.64 (92.47) 4.3 (09.54) (8.7) CGL (9.53) 3.00 (76.2) 4.30 (09.22) 5.3 (34.87) 0.34 (8.73) (8.7) 0.8 (20.64) 0.50 (2.7) 0.8 (20.64) 0.75 (9.05) (8.7).34 (34.04) 0.06 (.59) 0.94 (23.8) 0.75 (9.05) 0.06 (.59).06 (26.92) 0.09 (2.29).375 (34.93).50 (38.).0 (25.4) 0.25 (3.8) 0.9 (4.76) IEC and ritish Standard fuses Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications CGL (76.2) 5.25 (33.35) 8.9 (207.96).0 (25.4) 2.38 (60.33) For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Available Red Spot fuse holders 0.4 (0.32).0 (25.4) Fuse amps Up to 32 Catalog symbol* RS32_ RS63_ RS00_ RS200_ CGL (25.4) 3.0 (76.2) 5.25 (33.35) 8.9 (207.96) 0.60 (5.24) (9.53) 3.00 (76.2) RS400_ * See Red Spot data sheet no for terminal options. ata sheet no. 425 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-3

4 5 IEC and ritish Standard fuses CIF2 HRCI-CA industrial ceramic body fuses The HRCI-CA bolt-on, ceramic body fuse provides both overload and short-circuit protection to HRCI requirements. Offset blades for bolt-on mounting CIF2 fuse fits the ussmann series Red Spot fuse holder (data sheet 0083) and CAMaster fuse holder (data sheet number 432). 600 Vac 250 Vdc Amps -30 A IR 200 ka RMS Sym. CSA, Class , File 53787, CE Amps Amps CIF2 5CIF2 5 3CIF2 3 20CIF2 20 6CIF2 6 25CIF2 25 0CIF2 0 30CIF2 30 Features Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders Amps escription * Up to 20 Red Spot RS20_(terminal option) Up to 30 CAMaster CM20CF * See data sheet no (Red Spot) and 432 (CAMaster) for details. imensions in (mm) CIF06 HRCI-C industrial ceramic body fuses A miniature offset clip-in blade, ceramic body industrial fuse that provides both short-circuit and overload protection and the CIF06 fits the 30 A SAFEloc fuse holder (data sheet number 433). 600 Vac 250 Vdc Amps -30 A IR 200 ka RMS Sym. CSA, Class , File (3-30 A only), CE Amps Amps CIF06 5CIF06 5 3CIF CIF CIF CIF CIF CIF06 30 Features Close sizing to loads allows using smaller and less costly switches Provides a higher degree of short-circuit protection Helps protect motors against burnout from overloads Typical applications For use in circuits subject to surge currents such as those caused by motors, transformers and other inductive loads Recommended fuse holders Amps escription * Up to 30 SAFEloc C30(terminal option) * See data sheet no. 433 for SAFEloc details. imensions in (mm) 2.38 (60).44 (36) 2.5 (55).44 (36) 0.54 (4) 0.5 (3) 0.54 (4) 0.9 (5) 0.44 () 0.4 (4) 0.03 (4).75 (45) 0.03 () ata sheet no. 427 ata sheet no USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

5 IEC and ritish Standard fuses 5 CIH, CIK and CIL HRCI Misc. Type K fuses Misc. Type K HRCI bolt-on, ceramic body fuses provide both overload and short-circuit protection, featuring offset blades for bolt down mounting. 600 V Amps -00 A IR 200 ka@600 V CSA, Class , File 53787, CE (amp)cih, CIK, CIL CIH07 5CIH07 35CIK07 CIL4 3CIH07 20CIH07 40CIK07 90CIL4 6CIH07 25CIH07 50CIK07 00CIL4 0CIH07 30CIH07 60CIK07 imensions in (mm) The CIL4 has a rejection hole, not a slot as shown above. Amps A C E F G H J K L Up to K 2.25 (57) 2.28 (58) (70) 0.94 (24).06 (27).44 (37) 3.38 (86) 3.56 (9) 4.38 () F A L C 0.38 (0) 0.5 (3) 0.75 (9) 0.04 () 0.05 () 0.09 (3) H 2.88 (73) 2.88 (73) 3.69 (94) G G 0.2 (5) 0.2 (5) 0.34 (9) J E 0.3 (8) 0.4 () 0.4 () (25).09 (28).5 (39) 0.0 (3) 0.3 (3) 2.38 (60) 2.38 (6) 2.9 (74) IEC and ritish Standard fuses Recommended fuse holders Amps Red Spot* CAMaster* Up to 30 RS32_ CM30CF RS63_ CM60CF -00 RS00_ * See data sheet no (Red Spot) and 432 (CAMaster) for details. ata sheet no. 430 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-5

6 5 IEC and ritish Standard fuses HRC Form II current-limiting fuses HRC Form II bolt-on, ceramic body current-limiting fuses. 600 Vac (or less) 250 Vdc imensions in (mm) G G F A H C H07C offset blades F A E E J J Amps A IR 200 ka RMS Sym. H C K07C, K07CR, L4C, M4C offset blades CSA, Class , File 53787, S88:2, IEC 60269:2, CE G H C A (amps) catalog no. H07C offset blades 2H07C 6H07C 5H07C 25H07C 4H07C 0H07C 20H07C 30H07C K07C offset blades 40K07C 60K07C 00K07CR 50K07C L4C offset blades L4C M4C offset blades K07CR 00L4C 25M4C* 50M4C* 200M4C* L09C center blades L09C* M09C center blades 00L09C* 25M09C 50M09C 200M09C P09C center blades 250P09C* 300P09C* 350P09C* 400P09C* PC center blades 250PC 300PC 350PC 400PC RC center blades 450RC 500RC 600RC * Not suitable for installation in Red Spot fuse holders. Typical applications Used to protect motor control circuits, together with contactors and overload protection relays to provide Type 2 coordination per IEC Recommended fuse holders: Red Spot up to 400 amps (data sheet no.0083) and CAMaster up to 00 amps (data sheet no. 432). G L09C, M09C, P09C center blades K F F A C PC, RC center blades Catalog symbol/ style A C E F G H J K H K E E CSA category H07C offset blades HRCII-C (35) (4) (85) (9) () (73) (6) (8) (4) K07C offset blades HRCII-C (56) (22) (87) (3) () (73) (6) (8) (22) HRCII- (56) (22) (95) (3) () (73) (6) (8) (22) MISC L4C offset blades HRCII-C (60) (2) () (4) (3) (94) (9) () (25) M4C offset blades HRCII- (65) (38) () (9) (2) (94) (9) () MISC L09C center blades HRCII- (60) (2) (27) (4) (3) () (9) () MISC M09C center blades HRCII-C (65) (38) (36) (9) (3) () (9) (4) P09C center blades HRCII- (78) (59) (36) (25) (5) () (9) (3) MISC PC center blades HRCII-C (78) (59) (20) (25) (5) (33) (0) (6) (25) RC center blades HRCII-C (8) (73) (20) (25) (6) (33) (0) (6) (25) ata sheet no USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

7 IEC and ritish Standard fuses 5 SS, NS, ES S88 Part fuses The NS and ES are low voltage offset blade, ceramic body fuses complying with general purpose gg characteristics Vac Amps 2-63 A 20M25 to 63M00 motor starter ratings IR 33 ka (SS) ka (NS, ES) Meets the requirements of S88 Part and IEC , CE * Catalog symbol Amps (class) Max Vac S88 ref. SS 2, 4, 6, 0, 6, 20, 25, 32 (gg) 240 E NS 20M25, 20M32, 20M36, 32M36, 32M40, 32M50, 32M63 (gm) 45 2, 4, 6, 0, 6, 20, 25, 32 (gg) 550 ES 40, 50, 63 (gg) 63M, 63M00 (gm) 45 2, 4, 6, 0, 6, 20, 25, 32 (gg) 550 * To order, specify catalog symbol and amp rating, e.g., SS20. "M" indicates motor starter ratings. Recommended fuse holders Fuse symbol NS ES 32NNSF 63ENSF F F2 ST, NIT, AAO, AO, OS, CEO, EO S88 Part fuses The ST to EO type ceramic body, offset bolt-on blade low voltage fuses complying with general purpose gg characteristics Vac Amps A 20M25 to 200M35 motor starter ratings IR 33 ka (ST) ka (NIT, AAO, AO, CEO, EO, OS) Meets the requirements of S88 Part and IEC , CE * Catalog symbol Amps (class) Max Vac S88 ref. ST 2, 4, 6, 0, 6, 20, 25, 32 (gg) 240 NIT 2, 4, 6, 0, 6, 20, 25, 32 (gg) 20M25, 20M32 (gm) M40, 32M50, 32M63 (gm) 45 AAO 2, 4, 6, 0, 6, 20, 25, 32, (gg) M40, 32M50, 32M63 (gm) 500 AO 40, 50, 63 (gg) 63M, 63M00 (gm) 32, 40, 50, 63,, 00 (gg) 550 CEO 00M25, 00M60, 00M200 (gm) 45 EO 25, 60, 200 (gg) 200M35 (gm) OS, 00 (gg) M25, 00M60 (gm) 45 * To order, specify basic catalog symbol and amp rating. E.g., AO6. "M" indicates motor starter ratings. A2 500 A3 A4 45 IEC and ritish Standard fuses Typical applications The ST type are used in 240 V street lighting cut-outs NIT to EO types used for industrial and general purpose applications Recommended fuse blocks and holders Fuse catalog symbol NIT AAO AO OS CEO lock/holder catalog no.* CM32FC, RS20_ CM32F, RS32_ CM63F, RS63_ CM00F, RS00_ H-0 * See data sheet no. 432 (CM_), 0083 (RS_) and 200 (H-_). ata sheet no. 405 (SS), 400 (NS) and 40 (ES) ata sheet no. 423 (ST), 406 (NIT), 409 (AAO), 42 (AO), 407 (OS), 45 (CEO) and 47 (EO) USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-7

8 5 IEC and ritish Standard fuses AC, A, C,, C,, E, EFS S88 fuses Ceramic body, center blade two-hole bolt-on low voltage fuses that comply with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 250 amps with four hole mount. 45/550 Vac 250 Vdc Amps A 63M to 400M500 motor starter ratings IR see catalog numbers table Meets the requirements of S88 Parts and 2 and IEC , CE * IR ( ka) Max volts Catalog symbol Amps (class) AC C AC C AC A C S88 ref. 2, 4, 6, 0, 6, 20 (gg) , 32 (gg) 500 2, 4, 6, 0, 6, 20 (gg) , 32 (gg) , 50, 63 (gg) 63M, 63M00 (gm) , 50, 63 (gg) C E EFS C, C00 (gg) 00M25, 00M60, 00M200 (gm) 25, 60, 200 (gg) 200M250, 200M35 (gm) 250, 35, 355, 400 (gg) 35M400 (gm) M500 (gm) , 60, 200, 250, 35 (gg) * To order, specify catalog symbol and amp rating. E.g., C40. "M" indicates motor starter ratings EF, FF, FG, GF, GG, GH S88 fuses Ceramic body, center blade four-hole bolt-on low voltage fuses complying with general purpose gg characteristics and available up to 400 amps with two hole mount and up to 250 amps with four hole mount. (see catalog numbers table) 45/690 Vac 250/400 Vdc Amps A IR see catalog numbers table Meets the requirements of S88 Parts and 2 and IEC , CE * IR ( ka) Max volts Catalog symbol Amps (class) AC C AC C EF 355, 400 (gg) M500 (gm) 550 S88 ref. C FF 450, 500, 560, 630 (gg) C2 FG 450, 500, 560, 630 (gg) GF 70, 0 (gg) C3 GG 70, 0 (gg) , 250 (gg) GH 70, 0, 000, * To order, specify catalog symbol and amp rating, e.g., FG450. "M" indicates motor starter ratings. Recommended fuse blocks Fuse catalog symbol Modular block catalog no.* AC H-0 A H- C H-0 H- C H- H- E H-3 * See data sheet no. 200 (H-0_) and 20 (H-_) for details. ata sheets no. 40 (AC), 4 (A), 43 (C), 44 (), 46 (C), 48 (), 49 (E) and 42 (EFS) ata sheet no. 420 (EF), 402 (FF), 422 (FG), 403 (GF), 404 (GG) and 408 (GH) 5-8 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

9 IEC and ritish Standard fuses 5 6, 27, 33, 25 IN Type iazed fuses IN style Type ceramic body low voltage fuses. 500 Vac Amps 2-00 A IR 50 ka IEC and IN 4955, CE NZ0, NZ02 IN Type N Neozed fuses IN style Type N ceramic body low voltage. 400 Vac Amps 2-63 A IR 50 ka IEC and IN 4955, CE Amps "" dimension Color code Fig Pink rown Green Red Grey lue Yellow Pink rown Green Red Grey lue Yellow lack White Copper 25 5 Silver Red Additional 500 V quick acting fuses in body sizes 6, 27, 33 and 25 rated 2-00 A. Reference number suffixed "Q." E.g., 027Q. Gauge rings and keys can also be supplied Amps "" dimension Color code 2NZ0 2 Pink 4NZ0 4 rown 6NZ0 6 Green 0NZ0 0 Red 6NZ0 6 Grey 20NZ lue 25NZ Yellow 35NZ lack 50NZ White 63NZ Copper imensions mm 36 IEC and ritish Standard fuses imensions mm Fig. Fig. 2 Fig. 3 Fig. 4 ata sheet no. 424 ata sheet no. 424 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-9

10 5 IEC and ritish Standard fuses NHG NH HRC fuses IN 000 to 4 Class: gg/gl IN square bodied, dual indication industrial fuses with voltage conducting metal gripping lugs. They are made of a steatite insulator, corrosion-proof (aluminum) metal parts with full-contact and silver-plated copper blades. All NHG fuses feature a selectivity ratio: :.6 up to 500 Vac. 500 Vac 690 Vac Amps A IR 20 ka Frequency Hz operating IEC 60269, VE 0636, IN CE (500 Vac only) imensions mm Fuse size a a 2 a 3 a 4 b c c 2 e e 2 e 3 e 4 f Recommended fuse blocks lock catalog no. Fuse size S S- *, S2-02, 2, 03, 3 a 4 a 3 a 2 a ata sheet no. 064 (500 V), (690 V) d b f c 2 c e 3 e 2 e 4 2 min. e NHG NH HRC fuses 500 Vac gg/gl dual indicator voltage conducting metal gripping lugs Amps 000 size 2 2NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG000 NHG NHG size 50 50NHG NHG00 NHG NHG NHG NHG00 0 size 6 6NHG0 0 0NHG0 6 6NHG NHG NHG NHG NHG NHG NHG NHG0 NHG NHG NHG NHG0 0 size 6 6NHG0 0 0NHG0 6 6NHG NHG NHG NHG NHG NHG NHG NHG0 NHG NHG NHG NHG0 Amps size 50 50NHG 63 63NHG NHG 00 00NHG 25 25NHG 60 60NHG NHG NHG NHG 35 35NHG NHG 02 size 35 35NHG NHG NHG NHG02 NHG NHG NHG NHG NHG NHG NHG02 2 size NHG NHG NHG NHG NHG NHG NHG NHG2 03 size NHG NHG NHG NHG03 3 size 35 35NHG NHG NHG NHG NHG NHG NHG3 0 0NHG3 4 size* NHG4G NHG4G 0 0NHG4G NHG4G NHG4G * Size 4 is a a single indicator fuse with slotted end blades. 5-0 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

11 IEC and ritish Standard fuses 5 NHG NH HRC fuses JKS-700 fast-acting fuses 690 Vac gg/gl dual indicator voltage conducting metal gripping lugs Amps 000 size 2 2NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG NHG size 50 50NHG NHG NHG NHG NHG * 60NHG size 50 50NHG NHG-690 NHG NHG NHG NHG NHG NHG NHG-690 Amps 2 size NHG NHG NHG NHG size NHG NHG NHG NHG NHG NHG size** NHG NHG4-690 * 60 amps rated at 660 Vac. ** Size 4 is a single indicator fuse with slotted end blades. The JKS-700 is a fast-acting, current-limiting fuse that is UL Recognized and has CSA Component Acceptance for applications up to 700 Vac. The JKS-700 is available in ratings up to 60 amps with the same dimensions as a standard Class J fuses; but its voltage rating places it outside the standard Class J fuse class. ussmann recommends the JM7000 modular fuse block and the JM7000-MW power distribution fuse block for the 30 amp case size JKS-700 fuses. See page 8-8 for details. 700 Vac (or less) Amps A IR Minimum 6I n 200 ka RMS Sym. Operating class ar UL Recognized, Semiconductor Fuses, File E5642 CSA Component Acceptance, C22.2 No Semiconductor Fuses, Class Features Current limitation for non-inductive circuits provides currentlimiting response to maximum ground fault and short-circuit conditions 200 ka interrupting rating provides protection at all circuit locations Economical circuit protection for high-fault current circuits Typical applications Power panelboards up to 700 Vac IEC and ritish Standard fuses Machinery disconnects up to 700 Vac (amps) JKS JKS JKS JKS ata sheet no. 064 (500 V), (690 V) ata sheet no. 026 USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-

12 5 IEC and ritish Standard fuses S_ and T_ NH fuse blocks Shroud kits NH fuse bases feature thermoplastic bodies, and IN-Rail and screw mounting (size 4 is screw fix). They are available with a range of protection accessories for live parts for IP20 protection. 690 Vac 000 Vac (S- only) Amps up to 250 A NH fuse sizes 000 to 4 IEC and 2 VE and 2 Typical applications Protecting industrial circuits and electrical apparatus Fuse size Poles Amps IN-Rail or screw mount Screw mount only Carton qty. S T00- S T- S T2- S T S4-S 3 4 Neutrals NH size Amps Carton qty. 250 SL SL SL-3 3 Accepts fuse sizes 000 and 00 0 and 02 and 2 03 and 3 Fits fuse block T00-IP20 T00- T-IP20 T- T2-IP20 T2- T3-IP20 T3- S00-SK S00- S2-SK S and S2 S3-SK S3 Phase barrier kits Fits fuse block S00-P S00- S2-P* S and S2 S3-P* S3 * Kits include 2 phase barriers and 2 ganging links. Fuse extraction handle Size Carton qty. C00-3 FEH ata sheet USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

13 IEC and ritish Standard fuses 5 Class gg IEC industrial ferrule fuses 0 to 22mm diameter IEC Class gg fuses with optional indicators (0x38mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, Class gg, 500 and 400 Vac, 0.5 to 50 A Standard W/ indicator Vac Amps IR (ka) Holder/block C0G C0G C0G2 2 C0G4 4 C0G6 6 C0G C0G0 0 C0G2 2 CHM IN-Rail*, 20 C0G6 6 MM block C0G20 20 C0G25 25 C0G C0G C0G C0G40I C0G50I * Not recommended for use with indicator version..22x58mm, Class gg, 400, 500 and 690 Vac, 2 to 25 A Standard W/ striker Vac Amps IR (ka) Holder/block C22G2 C22G4 C22G4S 4 C22G6 C22G6S 6 C22G8 C22G8S 8 C22G0 C22G0S 0 C22G2 C22G2S 2 C22G6 C22G6S C22G20 C22G20S 20 C22G25 C22G25S 25 C22G32 C22G32S 32 C22G40 C22G40S 40 C22G50 C22G50S 50 C22G63 C22G63S 63 C22G C22GS 500 C22G00 C22G00S 00 C22G25 C22G25S ØA C 2 20 * Use striker version to actuate optional, external microswitch. imensions mm Catalog symbol Ø A C CH22 IN-Rail*, JM7000 block ØE Indicator/striker C0G C4G C22G Ø E IEC and ritish Standard fuses 4x5mm, Class gg, 400, 500 and 690 Vac, to 50 A Standard W/ striker Vac Amps IR ( ka) Holder C4G 690 C4G2 2 C4G2S C4G C4G4S C4G C4G6S C4G C4G8S C4G C4G0S C4G C4G2S CH4 IN-Rail** C4G C4G6S C4G C4G20S C4G C4G25S C4G32 C4G32S C4G40 C4G40S C4G50 C4G50S ** Not recommended for use with indicator version, use striker version to actuate optional, external microswitch ata sheet no USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-3

14 5 IEC and ritish Standard fuses Class am IEC industrial ferrule fuses 0 to 22mm diameter IEC Class am fuses with optional indicators (22x58mm only) and strikers. See catalog numbers for availability and ratings. 0x38mm, Class am, 500 and 400 Vac, 0.25 to 25 A Standard Vac Amps IR (ka) Holder/block C0M C0M C0M2 2 C0M4 4 C0M CHM in-rail, C0M MM block C0M0 0 C0M2 2 C0M6 6 C0M C0M x5mm, Class am, 400, 500 and 690 Vac, 0.25 to 50 A Standard W/ striker Vac Amps IR (ka) Holder C4M C4M C4M C4M2 2 C4M2S C4M C4M4S C4M C4M6S C4M C4M8S C4M C4M0S CH4 IN-Rail** C4M C4M2S C4M C4M6S C4M C4M20S C4M C4M25S C4M32 C4M32S C4M40 C4M40S C4M50 C4M50S ** Use striker version to actuate optional, external microswitch. 22x58mm, Class am, 400, 500 and 690 Vac, 2 to 25 A W/ Standard indicator W/ striker Vac Amps IR (ka) Holder/block C22M2 2 C22M4 4 C22M6 6 C22M8 8 C22M0 0 C22M2 C22M2S 2 C22M6 C22M6S C22M20 C22M20S 20 CH22 IN-Rail*, C22M25 C22M25S 25 JM7000 block C22M32 C22M32S 32 C22M40 C22M40S 40 C22M50 C22M50S 50 C22M63 C22M63S 63 C22M C22MS 500 C22M00 C22M00S C22M25 C22M25I C22M25S * Not recommended for use with indicator version, use striker version to actuate optional, external microswitch. imensions mm ØA Catalog symbol Ø A C C ØE Indicator/striker C0M C4M C22M Ø E ata sheet no USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries

15 IEC and ritish Standard fuses 5 HRC fuse holders CAMaster The ussmann series CAMaster HRC fuse holder features a unique cam-action for easy fuse removal while allowing significantly improved contact pressure between fuse carrier and base contact that enhances electrical performance. A range of lockable safety carriers for the fuse holder (catalog reference LSC), are available. 690 V Amps up to 00 A CSA C22.2 No. 39; IEC 269 and S88, CE SAFEloc The ussmann series SAFEloc HRC fuse holders (for use with HRCI-C fuses) provides a positive, stress-free fuse fitting and locks it in position to ensure safe insertion and withdrawal from the base. ase contacts are fully shrouded to help protect against electric shock. Shrouds utilize simple slide/snap action allowing access to the contact terminal screws. It can be mounted on a 35mm IN-Rail or panel-mounted with a single screw. 600 V Amps A Amps etails for Fuses accepted CM20CF 30 _CIF2 HRCI-CA applications CM30CF 30 _H07C CM60CF 60 _K07C HRCII applications CM00CF 00 _K07CR Accessories Amps escription CAMaster accepted 20S 30 CM20CF 32S 30 ack stud CM30CF 60/00S 60/00 CM60/00CF GLP All Ganging link kit 3-Pole 20LSC 30 CM20CF 32LSCC 30 Security carrier with clip CM30CF 63/00LSC 60/00 CM60/00CF esigned to accommodate the compact range of offset blade fuse to CSA C22.2 No. 06, HRCI-C, CE * Amps Connection Fuses accepted C30F C30S C30FS C60F C60S C60FS * For use with HRCI-C fuses Front ack Front-back Front ack Front-back ussmann series Red Spot fuse holders _CIF06 EK-(amp) IEC and ritish Standard fuses These versatile CSA Certified and IP20 finger-safe fuse holders for S88 HRC industrial fuses are available in ratings from 20 to 400 amps. Padlock inserts, warning carriers and fuse adapter accessories enhance safety and application flexibility. See data sheet no for details. USSMANN SERIES FULL LINE CATALOG 007 OCTOER 208 Eaton.com/bussmannseries 5-5

16 USSMANN SERIES Enhanced safety. Improved system reliability. Simplified inventory. It s easier than ever to improve your circuit protection while efficiently reducing your fuse inventory. Leveraging ussmann series ultimate protection fuses, our Low-Peak Upgrade program couples the industry s most advanced circuit protection with our extensive knowledge to deliver enganced safety, improved system reliability and simplified inventory. In just three simple steps, you ll save time and increase productivity. All by using ussmann series Low-Peak fuses. Three steps to ultimate protection: Audit 2 Analyze 3 Implement Visit Eaton.com/bussmannseries to learn more. Follow us on social media to get the latest product and support information.