Circuit Protection Solutions. Low Voltage Fuse Links Catalogue

Transcription

1 Circuit Protection Solutions Low Voltage Fuse Links Catalogue

2 Table of Contents Domestic Applications to BS161 & BS11 Consumer Fuse Link 4 Plug Top Fuse Links 4 Industrial & Motor Applications to BS88 Offset Bolted Tags 5-7 Centre Bolted Tags 8-9 Offset Blade Tags 10 Merchandising Stand 11 Industrial Applications to BS88-500Vdc Special DC Range Offset/Centre Bolted Tag 1 Industrial Applications to BS88-660/690V Offset Bolted Tags 1 Centre Bolted Tags 14 Special Tag Arrangements 15 Street Lighting Applications to BS88 Offset Bolted Tags 16 Utility Applications to BS88 House-Service Cut-Out Fuse Links 17 J Type Fuse Links to BS88: Part 5 Cylindrical 17 J Type Fuse Links to BS88: Part 5 Slotted/Non Slotted 18 Joint NATO Reference System Cylindrical/Offset Bolted Tag 19 BS88 Fuseholders Camaster HRC Fuseholder 0 Safeloc Fuseholder 1 Cylindrical Domestic Fuses Domestic Fuses Cylindrical Industrial Fuses Class gg 4 Class am 5 CHD 6 CHM 7 CH 8 NH Fuses - Dual Indicator Class gg - Low Power Loss 9-0 Class gg 1 Class am - Class gg - am 4 NH Fuses - 5 NH Fuseholders for Knife Fuses 6 for Knife fuse and Fuseholders (NH) 7-8 NH Fuse Rails and Disconnectors 9-41 DO Fuses 4 DO Fuseholders 4 D Fuses 44 D Fuseholders 45 Other Low Voltage Fuse Ranges 46 Medium Voltage Fuses and Isolators 47 Ultra Fast Fuses and Holders 48-49

3 Domestic Applications to BS161 & BS11 Consumer Fuse Link 40V / 5-45 A Description: Cylindrical Fuse Links for domestic application according to BS161 Volts: - 40V Amps: A IR kA Applications: Protection of domestic distribution systems. Agency Information: Approved to BS161 Plug Top Fuse Links 40V / 1-1A Description: Cylindrical Fuse links for domestic applications according to BS16, to be fitted into domestic BS16 plug top to conform with the requirements of the Plug and Socket Safety Regulations 1995 Volts: - 40V Amps: - 1-1A IR - 6kA Applications: protection of the cables connected to domestic equipment against overloads or small overcurrents. Rating Catalogue Number BK (Part Number), packing = 100 Colour Code 5 C55 White 15 C1515 Blue 0 C150 Yellow 0 C00 Red 45 C4545 Green 10 Agency Information: BSI Kite Mark, ASTA accreditation (except 1A Fuse), BS16 RoHS Compliant Rating Catalogue Number Colour Code 1 C180-1A Black C180-A Black C180-A Red 5 C180-5A Black 7 C180-7A Black 10 C180-10A Black 1 C180-1A Black BK-(Part Number), packing= Catalogue Number A B C C C C C Catalogue Number A B C180-RatingA

4 Industrial & Motor Applications to BS88 Offset Bolted Tags V ac / - A Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics Applications: General Industrial & Motors applications Volts: V ac Amps: - - A IR - 415/550V ac Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) RoHS Compliant NITD 550V ac (gg) / - A 415V ac (gm) AAO 550V ac / - A Rating Catalogue Number NITD 4 NITD4 6 NITD6 10 NITD10 16 NITD16 0 NITD0 5 NITD5 NITD 0M5 NITD0M5 0M NITD0M M40 M50 M6 NITDM40 NITDM50 NITDM6 Class BS Ref gg gm Fixing Centres mm A Rating Catalogue Number AAO 4 AAO4 6 AAO6 10 AAO10 16 AAO16 0 AAO0 5 AAO5 AAO M40 AAOM40 M50 M6 AAOM50 AAOM6 Class BS Ref gg gm Fixing Centres mm A 7 0 Fuseholders: CAMASTER CMF, see page 0 Fuseholders: CAMASTER CMFC, see page 0 Part No (mm) A B C D E F G NITD NITDM Part No (mm) A B C D E F G H J AAO AAOM Data Sheet: 4106 Data Sheet:

5 Industrial & Motor Applications to BS88 Offset Bolted Tags (Cont.../...) V / - 100A Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics Applications: General Industrial & Motors applications Volts: V ac Amps: A IR / 550V ac Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) and CSA C. No 106-M 1985 RoHS Compliant BAO 550V ac / 5-6A CEO 550V ac / -100A 415V ac (gm) Rating Catalogue Number 5 BAO5 40 BAO40 50 BAO50 6 BAO6 6M80 BAO6M80 6M100 BAO6M100 Class BS Ref gg gm Fixing Centres mm A 7 0 Fuseholder: CAMASTER CM6F, see page 0 Rating Catalogue Number CEO 40 CEO40 50 CEO50 6 CEO6 80 CEO CEO M15 100M M00 CEO100M15 CEO100M160 CEO100M00 Class BS Ref gg gm Fixing Centres mm A Part No (mm) A B C D E F G H J Part No (mm) A B C D E F G H J BAO BAO6M CEO CEO100M15 & CEO100M Data Sheet: 411 Data Sheet:

6 Industrial & Motor Applications to BS88 Offset Bolted Tags (Cont.../...) V ac / 80-00A Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics Applications: General Industrial & Motors applications Volts: V ac Amps: A IR / 550V ac Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) RoHS Compliant OSD 550V ac (gg) / A 415V ac (gm) DEO 415V ac / 15-00A (gg) (gm) Rating Catalogue Number 80 OSD OSD M15 100M160 OSD100M15 OSD100M160 Class gg gm BS Ref Fixing Centres mm N/A 7 0 Fuseholders: CAMASTER CM100F, see page 0 Rating Catalogue Number 15 DEO DEO DEO00 00M50 DEO00M50 00M15 DEO00M15 Class gg gm BS Ref Fixing Centres mm N/A 94 5 Part No (mm) A B C D E F G H J Part No (mm) A B C D E F G H J OSD OSD100M DEO DEO00M Data Sheet: 4107 Data Sheet:

7 Industrial & Motor Applications to BS88 Centre Bolted Tags V ac / - 150A 50V dc Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics Applications: General Industrial & Motors applications Volts: V ac / 50V dc Amps: A IR - 50V dc / 550V ac Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) RoHS Compliant AC / BC 550V ac / - 6A 50 V dc (except gm) AD / BD / CD / DD / ED 550V ac / - 400A 415V ac (Types gm, DD, ED) 50 V dc (Types AD, BD) Type AC BC Rating Catalogue Number AC 4 AC4 6 AC6 10 AC10 16 AC16 0 AC0 5 AC5 AC 40 BC40 50 BC50 6 BC6 6M80 6M100 BC6M80 BC6M100 Class Fixing Centres mm gg gg gm Type AD BD CD DD ED Rating Catalogue Number AD 4 AD4 6 AD6 10 AD10 16 AD16 0 AD0 5 AD5 AD 40 BD40 50 BD50 6 BD6 80 CD CD M15 CD100M15 100M160 CD100M M00 CD100M00 15 DD DD DD00 00M50 DD00M50 00M15 DD00M15 50 ED50 15 ED15 55 ED ED400 15M400 ED15M M500 ED400M500* Class Ref BS Fixing Centres mm gg N/A gg N/A gg gm gg gm gg gm B B B/B *-550V ac Part No A B C D E F G H K AC AD BC BC6M BD CD CD100M15 & CD100M CD100M DD DD00M ED ED ED15M ED400M Data Sheets: AC: 4110 / BC: 411 / AD: 4111 / BD: 4114 / CD: 4116 / DD: 4118 / ED:

8 Industrial & Motor Applications to BS88 Centre Bolted Tags (Cont.../...) Vac / A Vdc Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics Applications: General Industrial & Motors applications EFS / EF / FF / GF 415V ac / A 550V ac (Types EF - gm, FF, FG, GF) 50V dc (Type GF) Volts: V ac / 50V dc Amps: A IR - 50V dc GF, GG except 1000 & 150A - 400V dc FG, FF - 415/550V ac Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) RoHS Compliant FG / GG / GH 550V ac / A 50V dc (Type GG A only) 400V dc (Type FG) Type EFS EF FF GF Rating Catalogue Number 15 EFS EFS160 Class Ref BS Fixing Centres mm 1 00 EFS00 gg N/A 50 EFS50 15 EFS15 1/ EF EF400 gg 400M500 EF400M500 gm 450 FF FF FF FF GF GF GF GF150 Interrupting Rating 1 C1 1/184 1 gg C 1/184 1 gg C 1/ Vac 415 Vac 415 Vac 400Vdc 550Vac 50Vdc Type FG GG GH Rating Catalogue Number 450 FG FG FG FG GG GG GG GG GH GH GH GH150 Fixing Class Centres mm gg 167/1 1 gg 165/1 165/8.5 1 Interrupting Rating 550Vac 400vdc 550Vdc 50Vdc 550Vdc No DC Rating gg Vac (mm) Part No A B C D E F G H J EFS EF55 & EF400M FF FG GF (mm) Part No A B C D E F G H J FG GF GG710 & GG1000 & (mm) Part No A B C D E F G H J GH710 & GH1000 & Data Sheets: EFS: 411 / EF: 410 / FF: 410 / GF: 410 Data Sheets: FG: 41 / GG: 4104 / GH:

9 Industrial & Motor Applications to BS88 Offset Blade Tags V / - 6A Description: Fuse Links for general industrial applications with Q1 fusing factor - general purpose (gg) and motor protection (gm) characteristics. Volts: - 40V ac (SSD) - 415V ac (NSD gm) / ESD gg (40-6A) - 550V ac (NSD gg) / ESD gg ( - A) Amps: - - 6A IR - 40V ac - 500V ac Applications: General Industrial and Motors applications Agency Information: Meets BS88: Part 6, 1988 and IEC 69: Parts 1, 1986 RoHS Compliant Rating Catalogue Number SSD 4 SSD4 6 SSD6 10 SSD10 16 SSD16 0 SSD0 SSD Rating Catalogue Number NSD 4 NSD4 6 NSD6 10 NSD10 16 NSD16 0 NSD0 NSD 0M5 NSD0M5 0M NSD0M 0M6 NSD0M6 M6 M40 M50 M6 NSDM6 NSDM40 NSDM50 NSDM6 Class BS Reference Fuseholder gg E1 N/A 0 Class gr gm BS Reference Fuseholder F1 SAFELOC NNSF 0 Rating Catalogue Number Class BS Reference Fuse Holder ESD 4 ESD4 6 ESD6 10 ESD10 16 ESD16 0 ESD0 ESD 40 ESD40 gg F SAFELOC 6ENSF 0 Part No (mm) A B D E F N SSD NSD & NSD0M NSD0M6 & NSDM ESD50 6 ESD6 6M80 6M100 ESD6M80 ESD6M100 gm ESD - A 1.8 ESD40-6A ESD6M 1.0 Data Sheet SSD: 4105 Data Sheet NSD:

10 Point of Sale Stand Merchandising Stand Description: Merchandising stand with BS88 fuses packed in packs of s or 10 s Stand dimensions: 1.88 Metre tall x 0.91 Metre wide x 0.51 Metre deep* (including hooks) Please note this stand is for the UK market only Part Number Part Description Pack Qty (Nb of fuses per pack) Outer box Qty (MOQ) M-AAO10 10A 550V BS88 Fuse 0 M-AAO16 16A 550V BS88 Fuse 0 M-AAO0 0A 550V BS88 Fuse 0 M-AAO5 5A 550V BS88 Fuse 0 M-AAO A 550V BS88 Fuse 0 M-BAO40 40A 550V BS88 Fuse 0 M-BAO50 50A 550V BS88 Fuse 0 M-BAO6 6A 550V BS88 Fuse 0 M-CD A 550V BS88 Fuse 0 M-CEO80 80A 550V BS88 Fuse 0 M-CEO A 550V BS88 Fuse 0 M-NITD A 550V BS88 Fuse 0 M-NITD10 10A 550V BS88 Fuse 0 M-NITD16 16A 550V BS88 Fuse 0 M-NITD0 0A 550V BS88 Fuse 0 M-NITD A 550V BS88 Fuse 0 M-C180-A A BS16 Fuse M-C180-5A 5A BS16 Fuse M-C180-1A 1A BS16 Fuse M-NSD4 4A 550V BS88 Fuse 0 M-NSD6 6A 550V BS88 Fuse 0 M-NSD10 10A 550V BS88 Fuse 0 M-NSD16 16A 550V BS88 Fuse 0 M-NSD0 0A 550V BS88 Fuse 0 M-NSD A 550V BS88 Fuse 0 M-NITD6 6A 550V BS88 Fuse 0 M-STD6 6A 40V BS88 Fuse 0 M-STD10 10A 40V BS88 Fuse 0 M-NNSF A Safeloc Fuseholder 1 5 M-6ENSF 6A Safeloc Fuseholder 1 5 M-CM0F 0A Camaster Fuseholder 1 5 M-CMFC A Camaster Fuseholder Compact 1 5 M-CMF A Camaster Fuseholder 1 5 M-CM6F 6A Camaster Fuseholder 1 5 M-CM100F 100A Camaster Fuseholder

11 Industrial Applications to BS88-500Vdc Special DC Range Offset/Centre Bolted Tag 500Vdc / 10-6A Description: Fuse links for industrial DC applications available in offset and centre bolted tags Volts: - 500V dc Amps: A IR - 500V dc Applications: Protection of DC electrical circuits Agency information: ASTA approved to BS88 part RoHS Compliant Rating Offset Bolted Center fixings Centre Bolted 7mm 98mm 111mm 10 10HS07-10KS HS07-16KS09 0 0HS07-0KS09 5 5HS07-5KS09 HS07 - KS KS07 40KS08 40KS KS07 50KS08 50KS09 6 6KS07 6KS08 6KS09 0 (mm) Part No A B C D F G H J HS KS Part No (mm) A B C D E F G H KS KS Data Sheet: E

12 Industrial Applications to BS88-660/690V Offset Bolted Tags V / - 00A Description: Fuse links for industrial applications at 660/690V that meets dimensional and performance requirements of BS88 and IEC standards Volts: / 690V ac - 50V dc ( - 6A) - 400V dc (80-00A) Amps: A IR - 660V ac - 400V dc Applications: Protection of large industrial installations at 600/690Vac Agency information: Meets BS88: Part 1 & and IEC 69: Parts 1 & RoHS Compliant Rating Catalogue Number H H H H H H H H K K K L L M M M BS Reference CAMaster fuseholder A 0 CMF A 0 CM6F CM100F A4 10 N/A N/A 5 N/A Part No (mm) A B C D E F G H J H K L M Data Sheet H07: 4150 Data Sheet K07: 4151 Data Sheet L14: 415 Data Sheet M14: 415 1

13 Industrial Applications to BS88-660/690V Centre Bolted Tags V ac / - 60A V dc Description: Fuse Links for industrial applications at 660/690V that meets dimensional and performance requirements of BS88 and IEC standards. Rating Catalogue Number K K K K K K K K K K BS Reference Fixing Centres (mm) N/A 9 0 Volts: / 690V ac - 50V dc ( - 6A) (K08, K09) - 400V dc (80-60A) (L09, M09, N09, P09, N11, P11, P1, R11, R1) Amps: A IR - 660V ac - 50V dc/400v dc Applications: Protection of large industrial installations at 660/690Vac Agency Information: Meets BS88: Part 1 & and IEC 69: Parts 1 & RoHS Compliant Part No (mm) A B C D E F G H K A K A K A K A K K K K K K K K K K L L M M M N N P P N N N N N P P R R R R P P R R R R1-660 N/A B1 B B B4 N/A 1 1 C1 1/184 1 C 1/184 1 N/A 167/1 1 Part No (mm) A B C D E F G H J Part No (mm) A B C D E F G H L M N P N P P R R Data Sheets: K08: 415 / L09: 4156 / M09: 4157 / N09: 4158 / P09: 4159 / N11: 4160 / P11: 4161 / R11: 416 / R1:

14 Industrial Applications to BS88-660/690V Special Tag Arrangements V / A Description: Fuse Links for industrial applications at 660/690V that meets dimensional and performance requirements of BS88 and IEC standards. Volts: / 690V ac (except S0 type - 550V ac) - 400V dc (except S0 type) Amps: A IR - 660V ac - 400V (except S0 type) Applications: Protection of large industrial installations at 600 / 690Vac Agency Information: BS88 part 1 section -1 & - RoHS Compliant Offset Bolted Tag Tag Types Offset Bolted Tag Centre Bolted Tag Special Offset Tag Rating Catalogue Number 15 15M M M M M M M 00 00M 50 50N N N N P P R R N N N N N P P R R R R S S0 Fixing Centres (mm) / / Centre Bolted Tag Part No (mm) A B C D E F G H J M M N Special Tag Arrangement 8.7 Part No (mm) A B C D E F G H N Part No (mm) A B C D E F G H J N P R S Part No (mm) A B C D E F G H J P R Data Sheets: M1 & M: 415 / N15: 4164 / N4: 4165 / P5: 4161 / R40: 416 / N0: 4166 / P0: 4167 / R0: 4168 / S0: E

15 Street Lighting Applications to BS88 Offset Bolted Tags V / - A Description: Fuse Links for general street lighting applications with Q1 fusing factor - general purpose (gg) Applications: Street lighting applications Volts: V ac Amps: - - A IR - 40V ac (STD) / 550V ac (SMD) Agency information: Meets BS88: Part 1 & (1988), IEC 69: Parts 1 (1986) RoHS Compliant SMD 415V ac (gg) / - A STD 40V ac / - A Rating Part Reference SMD 4 SMD4 6 SMD6 10 SMD10 16 SMD16 0 SMD0 5 SMD5 SMD 0 Rating Part Reference STD 4 STD4 6 STD6 10 STD10 16 STD16 0 STD0 5 STD5 STD 0 Part No (mm) A B C D SMD Part No (mm) A B C D E F G H STD Also available as Offset Bladed Tags SSD, see page 10 Data Sheet: 41 16

16 Utility Applications to BS88 House Service Cut-Out Fuse Links 415V / 5-100A Description: Cylindrical Fuse Links for electrical utilities to BS Standard Volts: - 415V Amps: A IR - 415V Applications: Fuses to use in connection with House Service cut-outs. Agency Information: ASTA certified and tested in accordance to BS 161 RoHS Compliant Rating Catalogue Number mm Diameter 0mm 5 5KR KR KR85-0 0KR85-5 5KR85-0 0KR85 0LR KR85 40LR KR KR85 50LR KR85 60LR KR KR85 80LR KR KR85 100LR85 KR85 Type 0 J Type Fuse Links to BS88: Part 5 Cylindrical Type 415V / 0-50A Description: Cylindrical type fuses designed for use with wedge type fuse carriers on BS applications Volts: - 415V Amps: A IR - 415V Applications: For use by Electrical Authorities in distribution pillars, open type substation boards, heavy duty cut-outs, and underground connection boxes. Cylindrical type to be used in pole or wall mounted outdoor service fuse units. Agency information: ASTA certifed and tested to BS88: Part 5 RoHS Compliant : Rating Catalogue Number 0 0MJ5-6 MJ MJ MJ MJ MJ MJ MJ MJ MJ5-6 0 LR85 Type Data Sheet KR85: 4185 Data Sheet LR85: 4186 Data Sheet:

17 Utility Applications to BS88 J Type Fuse Links to BS88: Part 5 Slotted/Non Slotted Types 415V / 0-800A Description: Slotted type fuses designed for use with wedge type fuse carriers on BS applications Volts: - 415V Amps: A (Slotted Type) 800A (Non Slotted Type) IR - 415V Applications: For use by Electrical Authorities in distribution pillars, open type substation boards, heavy duty cut-outs, and underground connection boxes. Agency information: ASTA certified and tested BS88: Part 5 RoHS Compliant Rating Slotted Fixing Center 76mm 8mm 9mm Non Slotted MJ MJ MJ0-8 MJ MJ0-8 40MJ MJ0-8 50MJ MJ9-6 6MJ0-8 6MJ MJ9-6 80MJ0-7 80MJ MJ MJ MJ MJ0-7 15MJ MJ MJ MJ MJ9-6 00MJ0-7 00MJ MJ9-6 50MJ0-7 50MJ MJ0-7 15MJ PJ0-7 55PJ PJ PJ RJ RJ SJ SJ SJ8 10 Type A B C D E F G H I J K MJ /6.5 MJ0-7 (Up to 00A) /6.5 MJ0-7 (15-400A) /6.5 MJ1-7 (Up to 00A) /8.7 MJ1-7 (15-400A) /8.7 PJ /6.5 PJ /8.7 RJ /8.7 SJ /8.7 SJ /8.7 Slotted Type (MJ1-7 up to 00A) Data Sheets: MJ0-8: 4178A / MJ0-7: 4178B / MJ1-7 or 8: 4180 / PJ1: 4181 / RJ: 418 / SJ:

18 Joint NATO Reference System Cylindrical/Offset Bolted Tag 440V / A Description: Cylindrical Fuse links originally developped for the Admiralty but are now used in a wide variety of applications Volts: - 440V Amps: A (Cylindrical) Applications: defence, aeronautical, allied industries, electronics Agency information: Defence standard (superceding DEF 6). Tested to BS88 at 440V/kA RoHS Compliant Cylindrical A (Offset Bolted Tag) IR - 440Vac Size 0 1 Rating Cylindrical Offset Bolted N/A Size A D B Offset Bolted Tag Size A B C D Data Sheets: size 0: 4188/ size 1: 4189 / size : 4190 / size :

19 BS88 Fuseholders CM CAMASTER HRC Fuseholder 690V ac / 0-400A Description: Fully shrouded fuse bases with unique cam action system for BS88 Fuse link applications. Volts: - 660V ac Amps: - 0, (Compact), 6 and 100A Applications: Lighting and heating equipment, circuit protection, Motor protection, Control equipment circuit protection Agency Information: CE Compliance to BS88, EN IEC For UL and CSA approved versions also available,consult Cooper Bussmann RoHS Compliant Rating Catalogue Number Recommended Fuse Link 0 CM0F NITD 10 CMFC NITD 10 CMF AAO 10 6 CM6F BAO CM100F OSD 5 00* 00DF 00DFBS Front/Back 00DBS Back/Back DD 400* 400EF ED * 00A & 400A do not have the CAM action Accesories Numbers Accessory Rating Catalogue No Back Stud 6/100 BSC BS 6/100BS Ganging Links GLP 1 set Neon Indicator V ac NI Lockable Safety Carriers Neutral Links 6/100 LSCC LSC 6/100LSC CMLC CML 6/100CML Security Clip CMSC 0 1 Notes: 1 - Type CMFC is also available rated at 0A, catalogue number CM0F - For colours other than Black (standard) add the appropriate letter code: W = White; G = Green, GY = Grey Cat. No Max cable mm (mm) A B C D E F G H J K CM0F M6 - Care must be taken when fitting solid single or stranded cables of small cross-sectional area to ensure correct clamping. Small Multi-stranded cables must be terminated with bootlace ferrules to ensure correct clamping. Bootlace ferrules should not be used on standard power cables or high current applications. If in doubt please consult Cooper Bussmann 4 - A +5% tolerance should be allowed on dimensions when cutting metal work to fit CAMaster fuse holders CMFC M6 CMF M6 CM6F M8 CM100F M8 00DF M1 400EF

20 BS88 Fuseholders NNS, ENS Safeloc Fuseholder 660V ac / - 6A Rating Catalogue Number Available Variants Required Fuse Link NNSF Front connected/ Front connected 10 Description: Fuseholder to be used with BS88 Fuse links for bolted panel mounting or DIN rail. NNSBS NNSFBS Back stud/ Back stud Front connected/ Back stud NSD Volts: - 550V ac, 415V ac (6A) Amps: -, 6A Applications: Lighting and heating equipment, circuit protection, Motor protection, Control equipment circuit protection Agency Information: CE Compliance to BS88, EN IEC 6069 RoHS Compliant 6 NNL Neutral links 10 6ENSF 6ENSBS 6ENSFBS Front connected/ Front connected Back stud/ Back stud Front connected/ Back stud ESD 6ENL Neutral links 1 Notes: 1 - For colours other than Black (standard), add the appropriate letter code: W = White, G = Green, GY = Grey, at the end of the catalogue reference Security seal (ref. 551) available for A Safeloc - Care must be taken when fitting solid single or stranded cables of small cross-sectional area to ensure correct clamping. Small Multi-stranded cables must be terminated with bootlace ferrules to ensure correct clamping. Bootlace ferrules should not be used on standard power cables or high current applications. If in doubt please consult Cooper Bussmann 4 - A +5% tolerance should be allowed on dimensions when cutting metal work to fit Safeloc fuse holders Rating Part No Max Cable mm (mm) A B C D E F G H J K NNS M6 6 ENS M8 1

21 Cylindrical Domestic Fuses Class gg (gf) V / A Sizes: 6x, 8x, 10x5 8x1, 10x1, 8x6 10x8 Description: Cylindrical fuses for domestic protection. Available in types with and without striker indicator. Volts: - 50V ac (6x, 8x, 10x5) 400V ac (8x1, 10x1, 8x6, 10x8) Amps: A IR - 6kA (6x, 8x, 10x5) - 0kA (8x1, 10x1, 8x6, 10x6) Applications: Protection of power lines, heating circuits, lighting circuits. electrical domestic appliances and domestic electricity meters Agency Information: NF C 60, EN IEC 6069-, NF marking (see references in bold in catalogue numbers chart) RoHS Compliant Size 6x 8x 10x5 8x1 10x1 8x6 Currrent References without Indicator CD06G CD06G4 CD06G6 CD06G10 CD08G CD08G4 CD08G6 CD08G10 CD08G16 CD105G6 CD105G10 CD105G16 CD081G0.5 CD081G1 CD081G CD081G4 CD081G6 CD081G8 CD081G10 CD081G1 CD081G16 CD081G0 CD101G16 CD101G0 CD101G5 CD086G CD086G4 CD086G6 CD086G10 CD086G16 CD086G0 CD086G5 CD086G References with Indicator CD08GI CD08G4I CD08G6I CD08G10I CD08G16I CD105G6I CD105G10I CD105G16I - - CD081GI CD081G4I CD081G6I CD081G8I CD081G10I CD081G1I CD081G16I CD081G0I CD101G16I CD101G0I CD101G5I CD086GI CD086G4I CD086G6I CD086G10I CD086G16I CD086G0I CD086G5I CD086GI Interrupting Voltage Rating (V) (ka) UP* 50V 6kA 10 50V 6kA 10 50V 6kA V 0kA V 0kA V 0kA 1 Size A B C 10x8 5 CD108G5 CD108G CD108G5I CD108GI 400V 0kA 10 6 x x *UP = 8 x NFC x x x x

22 Domestic Fuses AD 440V ac / 15-90A Sizes: 10x8, 14x51, x58 (cylindrical fuses) 00 (Knife fuses) Size Current Catalogue Number Voltage (V) 10x8 15 CA10D15 Description: fuse cartridge type AD for fitting to circuit breakers on low-voltage branch circuits. Volts: - 440V ac Amps: A (Cylindrical fuses) Applications: Fitting for circuit breakers in public branch panels Agency Information: Conform to standards NF C 6-91, EN IEC 6069 RoHS Compliant A (Fuse size 00) IR - 0kA (size 10x8) - ka (size 14x51, x58, 00) 14x51 0 CA14D0 x CAD15 CAD0 CAD45 CAD60 0NH00AD 45NH00AD 60NH00AD 90NH00AD 440V V Sizes A B C 10x x x

23 Cylindrical Industrial Fuses Class gg V / A Sizes: 8x1, 10x8, 14x51, x58 Description: Cylindrical fuses for gg Industrial protection (general applications). Available with or without indicators and visual fuse activation indicator. Striker fitted to activate an auxiliary contact. Volts: - 400, 500, 690V ac Amps: A IR - 0kA - 400V ac (size 8 x 1) - 10kA and 500V ac - 80 ka - 690V ac Applications: Protection of electrical distribution circuits and electrical appliances (with the exception of electrical motors) Agency Information: EN IEC 6069 RoHS Compliant Size A B C D E 8 x x x x Size 8 x 1 10 x 8 14 x 51 x 58 Current References without Indicator 0.5 C08G0.5-1 C08G1 - C08G C08GI 4 C08G4 C08G4I 6 C08G4 C08G4I 8 C08G8 C08G8I 10 C08G10 C08G10I 1 C08G1 C08G1I 16 C08G16 C08G16I 0 C08G0 C08G0I 0.5 C10G0.5-1 C10G1 - C10G C10GI 4 C10G4 C10G4I 6 C10G6 C10G6I 8 C10G8 C10G8I 10 C10G10 C10G10I 1 C10G1 C10G1I 16 C10G16 C10G16I 0 C10G0 C10G0I 5 C10G5 C10G5I References References with with Indicator Striker Voltage (V) Disconnection power (ka) UP* 400V 0kA V C10G C10GI 400V C14G C14GI C14GS 4 C14G4 C14G4I C14G4S 6 C14G6 C14G6I C14G6S 8 C14G8 C14G8I C14G8S 10 C14G10 C14G10I C14G10S 1 C14G1 C14G1I C14G1S 16 C14G16 C14G16I C14G16S 0 C14G0 C14G0I C14G0S 5 C14G5 C14G5I C14G5S C14G C14GI C14GS 40 C14G40 C14G40I C14G40S 690V 500V 50 C14G50 C14G50I C14G50S 400V CG CGI 4 CG4 CG4I CG4S 6 CG6 CG6I CG6S 8 CG8 CG8I CG8S 10 CG10 CG10I CG10S 1 CG1 CG1I CG1S 16 CG16 CG16I CG16S 0 CG0 CG0I CG0S 5 CG5 CG5I CG5S CG CGI CGS 40 CG40 CG40I CG40S 50 CG50 CG50I CG50S 6 CG6 CG6I CG6S 80 CG80 CG80I CG80S 100 CG100 CG100I CG100S 690V 500V 15 CG15 CG15I CG15S 400V 10kA 10 80kA 10kA 80kA 10kA *UP: 4

24 Cylindrical Industrial Fuses Class am V / A Sizes: 8 x 1, 10 x 8, 14 x 51, x 58 Description: Cylindrical fuses for am industrial protection range (protection of motors). Available in types without indicators, with visual fuse activation indicator and plunger for activation of an auxiliary contact. Volts: - 440, 500, 690V ac Amps: A IR - 0kA - 400V ac (size 8 x 1) Applications: Direct protection of motors Agency information: Conform to standard EN IEC 6069 RoHS Compliant 10kA and 500V ac 80kA - 690Vac Size A B C D E 8 x x x x Size Current References without Indicator References References with Indicator with striker Voltage (V) Disconnection power (ka) 1 C8M1 C8M1I C8M C8MI 8 x 1 4 C8M4 C8M4I 6 C8M6 C8M6I N/A 400V 0kA 10 8 C8M8-10 C8M10 C8M10I 0.16 C10M C10M C10M0.5-1 C10M1 C10M1I C10M C10MI 4 C10M4 C10M4I 10 x 8 6 C10M6 C10M6I 8 C10M8 C10M8I N/A 500V 10kA C10M10 C10M10I 1 C10M1 C10M1I 16 C10M16 C10M16I 0 C10M0 C10M0I 5 C10M5 C10M5I C10M - 400V 0.5 C14M C14M C14M1 C14M1I C14M C14MI C14MS 4 C14M4 C14M4I C14M4S 6 C14M6 C14M6I C14M6S 8 C14M8 C14M8I C14M8S 14 x C14M10 C14M10I C14M10S 500V 10kA 10 1 C14M1 C14M1I C14M1S 16 C14M16 C14M16I C14M16S 0 C14M0 C14M0I C14M0S 5 C14M5 C14M5I C14M5S C14M C14MI C14MS 40 C14M40 C14M40I C14M40S 50 C14M50 C14M50I C14M50S 400V CM CMI 4 CM4 CM4I 6 CM6 CM6I 8 CM8 CM8I x CM10 CM10I 1 CM1 CM1I 16 CM16 CM16I CM16S 690V 0 CM0 CM0I CM0S 5 CM5 CM5I CM5S CM CMI CMS 40 CM40 CM40I CM40S 50 CM50 CM50I CM50S 6 CM6 CM6I CM6S 80 CM80 CM80I CM80S 100 CM100 CM100I CM100S 500V 15 CM15 CM15I CM15S 400V 80kA 10kA UP* 10 *UP: Neutral Cartridges 8 x 1 C8NL 10 x 8 C10NL Neutral 14 x 51 C14NL x 58 CNL 5

25 Modular Domestic Fuse Holders CHD V / 10 - A Sizes: 8x, 10x5, 8x1 10x1, 10x8 Description: Fuse Holder for domestic cylindrical fuses. Secured to DIN rail and available with light indicator for active fuse function. Range as single-pole and single-pole plus neutral in one module. Volts: - 50V ac (8x1, 10x5) - 400V ac (8x1, 10x1, 10x8) Amps: A IR - 6kA (6x, 8x, 10x5) - 0kA (8x1, 10x1, 8x6, 10x8) Size Rating Voltage (V) without Indicator Single Pole with Indicator Single Pole + Neutral without Indicator with Indicator 8x CHD81D CHD81DI CHD81DN CHD81DNI 1 10x CHD1051D CHD1051DI CHD1051DN CHD1051DNI 1 8x CHD811D CHD811DI CHD811DN CHD811DNI 1 10x CHD1011D CHD1011DI CHD1011DN CHD1011DNI 1 10x8 400 CHD108D CHD108DI CHD108DN CHD108DNI 1 Neutral 400 CHDND UP: UP Applications: Protection for power lines, heating circuits, lighting circuits. electrical domestic appliances and domestic electricity meters Agency Information: NF C 60, EN IEC 6069-, NF marking on all models 6

26 Cylindrical Industrial Fuses CHM 690V / 5 - A Sizes: 8x1, 10x8 Description: Fuse Holder for cylindrical industrial fuses. Secured to DIN rail and available with and without light indicator for active fuse function. Range as multi-pole and single-pole plus neutral fuse holders in one module. Accessories for the assembly of modules. Volts: - 690V ac Amps: A Applications: Protection of industrial electrical distribution circuits and electrical appliances Agency Information: EN IEC 6069-, EN IEC Size 8 x 1 10 x 8 Poles No of Modules References without Indicator References with Indicator Neutral 1 CHMDNX - Current Voltage (V) 1P 1 CH081D CH081DI 1 1P + N 1 CH081DNS CH081DNSI 1 1P + N CH081DN CH081DNI 6 P CH08D CH08DI 5A 690V 6 P CH08D CH08DI 4 P + N CH08DNS CH08DNSI 4 P + N 4 CH08DN CH08DNI 4P 4 CH084D CH084DI Neutral 1 CHMDNX - 1P 1 CHM1D CHM1DI 1 1P + N 1 CHM1DNS CHM1DNSI 1 1P + N CHM1DN CHM1DNI 6 P CHMD CHMDI A 690V 6 P CHMD CHMDI 4 P + N CHMDNS CHMDNSI 4 P + N 4 CHMDN CHMDNI 4P 4 CHM4D CHM4DI 1 1 Catalogue Number Description Size References Clips for assembly of multi-pole fuse holders 8 x 1-10 x 8-14 x 51 - x 58 AL-D 1 Multi phase handle pin connector 8 x 1-10 x 8 CH810-HP 1 7

27 Cylindrical Industrial Fuses CH 690V / 50-15A Sizes: 14 x 51, x 8 Description: Fuse Holders for cylindrical industrial fuses. Secured to DIN rail and screwed. Available with and without light indicator for active fuse function and with auxiliary contact for use with plunger fuses. The auxiliary contact is available in two versions: one for the detection of fuse actuation and pre-disconnected, and the other fuse actuation only. Volts: - 690V ac Amps: A Applications: Protection of industrial circuits and electrical appliances. Size 14 x 51 x 58 Poles References Nb of without Modules Indicator References with Indicator References with auxiliary contact Fuse response/ presence and pre-disconnect Fuse response Neutral 1.5 CH141DNX - - Current Voltage (V) 1P 1.5 CH141D CH141DI CH141DMS-F CH141DMS 6 1P + N CH141DN CH141DNI - - P CH14D CH14DI A 690V P 4.5 CH14D CH14DI CH14DMS-F CH14DMS P + N 6 CH14DN CH14DNI CH14DNMS-F CH14DNMS 1 4P 6 CH144D CH144DI - 1 Neutral CH1DNX - 1P CH1D - CH1DMS 6 1P + N 4 CH1DN - P 4 CHD - 15A 690V UP* 6 6 Agency Information: EN IEC 6069-, EN IEC P 6 CHD - CHDMS P + N 8 CHDN - CHMDNMS 1 4P 8 CH4D - 1 *UP: 14 x 51 Description Size Ref UP* Clips for assembly of multi-pole fuse holder 8x1, 10x8, 14x51, AL-D 1 Multi phase handle Pin connector 14x51 CH14-P 1 Auxiliary contact for fuse response - 1 pole Auxiliary contact for fuse response - pole 14x51 14x51 CH14MS-1D CH14MS-D 5 *UP: x 58 8

28 NH Fuses - Dual Indicator Class gg - Low Power Loss 400V / - 60A Sizes 000, 00, 01, 1, 0,, 0, Description: Low Power Loss NH Fuses for industrial protection, gg range (general protection). Dual Indicator system for fuse operation function (in the body and in the side plate). Version with voltage free metal gripping lugs for insulated fuses. The components used are lead and cadmium free. Fuses subject to HRC recycling commitment. Volts: - 400V ac Amps: A IR - 10kA - 400V ac Applications: Protection of large electric distribution networks, cables and distribution boards where the minimization of power losses is a requirement. Electrical utilities and electrical distribution networks Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460, VDE approval. : see page 5 Size Rated Current voltage conducting gripping lugs gg-gl Dual Indicator voltage free metal gripping lugs NHG000B-400 NHG000BI NHG000B-400 4NHG000BI NHG000B-400 6NHG000BI NHG000B NHG000BI NHG000B NHG000BI NHG000B-400 0NHG000BI NHG000B-400 5NHG000BI-400 NHG000B-400 NHG000BI NHG000B-400 5NHG000BI NHG000B NHG000BI NHG000B NHG000BI NHG000B-400 6NHG000BI NHG000B NHG000BI NHG000B NHG000BI NHG00B NHG00BI NHG00B NHG00BI NHG01B-400 5NHG01BI NHG01B NHG01BI NHG01B NHG01BI NHG01B-400 6NHG01BI NHG01B-40 80NHG01BI NHG01B NHG01BI NHG01B NHG01BI NHG01B NHG01BI NHG1B NHG1BI NHG1B-400 4NHG1BI NHG1B NHG1BI NHG0B-400 5NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B-400 6NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B-400 4NHG0BI NHG0B NHG0BI NHGB NHGBI NHGB NHGBI NHGB NHGBI NHG0B NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHG0B NHG0BI NHGB NHGBI NHGB NHGBI-400 Data Sheets: /

29 NH Fuses - Dual Indicator Class gg - Low Power Loss 500V / A Sizes C00, 0, 1,,, 4, 4A Description: Low Power Loss NH Fuses for industrial protection, gg range (general protection). Dual Indicator system for fuse operation function (in the body and in the side plate) except for the sizes 4 & 4A. Version with voltage free metal gripping lugs for insulated fuses. The components used in manufacture are lead and cadmium free. Fuses subject to HRC recycling commitment. Volts: - 500V ac Amps: A IR - 10kA - 500V ac - 50kA - 50V dc Applications: Protection of large electric distribution networks, cables and distribution boards (except motors) where the minimize of power losses is a requirement. Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460, VDE approval. : see page 5 Data Sheets: 14 Size Slotted End Tags 4A None Slotted End Tags Rated Current voltage conducting gripping lugs gg-gl Dual Indicator voltage free metal gripping lugs NHG000B NHG000BI 4 4NHG000B 4NHG000BI 6 6NHG000B 6NHG000BI 10 10NHG000B 10NHG000BI 16 16NHG000B 16NHG000BI 0 0NHG000B 0NHG000BI 5 5NHG000B 5NHG000BI NHG000B NHG000BI 5 5NHG000B 5NHG000BI 40 40NHG000B 40NHG000BI 50 50NHG000B 50NHG000BI 6 6NHG000B 6NHG000BI 80 80NHG000B 80NHG000BI NHG000B 100NHG000BI 15 15NHG00B 15NHG00BI NHG00B 160NHG00BI 10 10NHG0B NHG0B - 0 0NHG0B - 5 5NHG0B - NHG0B - 5 5NHG0B NHG0B NHG0B - 6 6NHG0B NHG0B NHG0B NHG0B NHG0B NHG01B 10NHG01BI 16 16NHG01B 16NHG01BI 0 0NHG01B 0NHG01BI 5 5NHG01B 5NHG01BI NHG01B NHG01BI 5 5NHG01B 5NHG01BI 40 40NHG01B 40NHG01BI 50 50NHG01B 50NHG01BI 6 6NHG01B 6NHG01BI 80 80NHG01B 80NHG01BI NHG01B 100NHG01BI 15 15NHG01B 15NHG01BI NHG01B 160NHG01BI 00 00NHG1B 00NHG1BI 4 4NHG1B 4NHG1BI 50 50NHG1B 50NHG1BI 5 5NHG0B 5NHG0BI 40 40NHG0B 40NHG0BI 50 50NHG0B 50NHG0BI 6 6NHG0B 6NHG0BI 80 80NHG0B 80NHG0BI NHG0B 100NHG0BI 15 15NHG0B 15NHG0BI NHG0B 160NHG0BI 00 00NHG0B 00NHG0BI 4 4NHG0B 4NHG0BI 50 50NHG0B 50NHG0BI 15 15NHGB 15NHGBI 55 55NHGB 55NHGBI NHGB 400NHGBI 50 50NHG0B 50NHG0BI 15 15NHG0B 15NHG0BI 55 55NHG0B 55NHG0BI NHG0B 400NHG0BI NHGB 500NHGBI 60 60NHGB 60NHGBI NHG4G NHG4G NHG4G NHG4G NHG4G NH4AG NH4AG NH4AG NH4AG NH4AG NH4AG - 0

30 NH Fuses - Dual Indicator Class gg 690V / - 60A Sizes 000, 00, 0, 1,, Description: NH Fuses for gg range industrial protection (general protection). Double indicator system for fuse operation (in the body and in the side plate). Version with voltage free metal gripping lugs for insulated fuses. The components used in manufacture are lead and cadmium free. Fuses subject to HRC recycling commitment. Volts: - 690V ac Amps: A IR - 10kA - 690V ac Applications: Protection of electrical distribution circuits, cables and electrical appliances (with the exception of motors). Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460. : see page 5 Size Rated Current voltage conducting gripping lugs gg - gl Dual Indicator voltage free metal gripping lugs NHG000B-690 NHG000BI NHG000B-690 4NHG000BI NHG000B-690 6NHG000BI NHG000B NHG000BI NHG000B NHG000BI NHG000B-690 0NHG000BI NHG000B-690 5NHG000BI-690 NHG000B-690 NHG000BI-690 5** 5NHG000B-690 5NHG000BI NHG000B NHG000BI NHG00B NHG00BI NHG00B-690 6NHG00BI NHG00B NHG00BI NHG00B NHG00BI NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG0B NHG1B NHG1BI NHG1B-690 6NHG1BI NHG1B NHG1BI NHG1B NHG1BI NHG1B NHG1BI NHG1B NHG1BI NHG1B NHG1BI NHGB-690 6NHGBI NHGB NHGBI NHGB NHGBI NHGB NHGBI NHGB NHGBI NHGB NHGBI NHGB-690 4NHGBI NHGB NHGBI NHGB NHGBI NHGB NHGBI-690* 15 15NHGB NHGBI-690* 55 55NHGB NHGBI-690* NHGB NHGBI-690* NHGB NHGBI-690* * Contact Cooper Bussmann for availibility ** Interrupting Rating for the 5 A size 000 is 80kA 1

31 NH Fuses - Dual Indicator Class am V / - 60A Sizes 000, 00, 0, 1,, A Description: NH Fuses for am range industrial protection (general protection). Double indicator system for fuse operation (in the body and in the side plate). Version with voltage free metal gripping lugs for insulated fuses. The components used in manufacture are lead and cadmium free. Fuses subject to HRC recycling commitment. Volts: - 690V ac Amps: A IR - 80 ka - 500Vac (sizes 000,00 - up to 100A) - 10kA - 500Vac/690Vac Applications: Protection of electrical motors. Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460. : see page 5 Size Rated Current voltage conducting gripping lugs am Dual Indicator voltage free metal gripping lugs NHM000B-690 6NHM000BI NHM000B NHM000BI NHM000B NHM000BI NHM000B-690 0NHM000BI NHM000B-690 5NHM000BI-690 NHM000B-690 NHM000BI NHM000B-690 5NHM000BI NHM000B NHM000BI NHM00B 50NHM00BI 6 6NHM00B 6NHM00BI 80 80NHM00B 80NHM00BI NHM00B 100NHM00BI NHM00B 160NHM00BI 6 6NHM0B NHM0B NHM0B - 0 0NHM0B - 5 5NHM0B - NHM0B - 5 5NHM0B NHM0B NHM0B - 6 6NHM0B NHM0B NHM0B NHM1B-690 6NHM1BI NHM1B 80NHM1BI NHM1B 100NHM1BI 15 15NHM1B 15NHM1BI NHM1B 160NHM1BI 00 00NHM1B 00NHM1BI 4 4NHM1B 4NHM1BI 50 50NHM1B 50NHM1BI NHMB NHMBI NHMB NHMBI NHMB NHMBI NHMB-690 4NHMBI NHMB NHMBI NHMB NHMBI NHMB NHMBI NHMB 400NHMBI NHMB NHMBI NHMB NHMBI NHMB NHMBI NHMB NHMBI NHMB 60NHMBI

32 NH Fuses Class am 500V / - 60A Sizes C00, 0, 1,, Description: NH Fuses for am range industrial protection (general protection). Indicator for fuse activation in the side panel. The components used in manufacture are lead and cadmium free. Fuses subject to HRC recycling commitment. Volts: - 500V ac Amps: A IR - 10kA - 500Vac - 50kA - 50V dc Applications: Protection of direct starter motors Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460. : see page 5 Size C Rated current Voltage conducting gripping lugs NHC00M 4 4NHC00M 6 6NHC00M 10 10NHC00M 16 16NHC00M 0 0NHC00M 5 5NHC00M NHC00M 40 40NHC00M 50 50NHC00M 6 6NH00M 80 80NH00M NH00M 15 15NH00M NH00M NH0M 50 50NH0M 6 6NH0M 80 80NH0M NH0M 15 15NH0M NH0M 40 40NH1M 50 50NH1M 6 6NH1M 80 80NH1M NH1M 15 15NH1M NH1M 00 00NH1M 50 50NH1M NHM 15 15NHM NHM 00 00NHM 50 50NHM 15 15NHM 55 55NHM NHM 15 15NHM NHM NHM 60 60NHM Disconnect Power (ka) 10kA 10kA 10kA 10kA 10kA 10kA

33 NH Fuses with Striker Class gg - am V / 6-150A Sizes 1,,, 4 Description: NH Fuses for industrial applications class gg and am with integrated side striker for visual or remote indication of the fuse status. To be used with NH fuse holders fitted with micro-switch. Volts: - 500V ac Size 4-690V ac Size 1,, Current - 6A - 150A IR - 10kA - 500V ac - 80kA - 690V ac Applications: Protection of electrical distribution circuits (Class gg) and motor protection (Class am) Standards and Approvals: Conform to standards EN IEC 6069, VDE 066, DIN 460. Size 1 4 Rated Current gg Voltage conducting metal gripping lugs am Voltage conducting metal gripping lugs 6 6NHG1BS-690* 6NHM1BS-690* 80 80NHG1BS-690* 80NHM1BS-690* NHG1BS-690* 100NHM1BS-690* 15 15NHG1BS-690* 15NHM1BS-690* NHG1BS-690* 160NHM1BS-690* 00 00NHG1BS-690* 00NHM1BS-690* 4-4NHM1BS-690* 50-50NHM1BS-690* 15 15NHGBS-690* 15NHMBS-690* NHGBS-690* 160NHMBS-690* 00 00NHGBS-690* 00NHMBS-690* 4 4NHGBS-690* 4NHMBS-690* 50 50NHGBS-690* 50NHMBS-690* 15 15NHGBS-690* 15NHMBS-690* 55-55NHMBS-690* NHMBS-690* 15 15NHGBS-690* NHGBS-690* NHGBS-690* 400NHMBS-690* NHGBS-690* 500NHMBS-690* 60 60NHGBS-690* 60NHMBS-690* NH4G-S NH4G-S NH4G-S NH4G-S NH4G-S - * Contact Cooper Bussmann for availibility Pack Qty 4

34 NH Fuses - Knife Fuses (NH) Size a a1 a (max) a a4 b (rated) c1(±8) c (rated) D (rated) e1 (max) e (max) e (max) e4 (rated) f (max) ± ±1.5 49± ± ± ±1.5 49± ± ± ± +/ ± +1.5/ ± ± ±.5 68± ± ± ±.5 68± ± ± ±.5 68± ± ± ±.5 68± ± ± ±.5 68± ± ± ±.5 68± ± a a -1600A

35 NH Fuse Holders for Knife Fuses SB-D, SB-S, SB-DMS 690V / A Sizes 00, 0, 1,,, 4 Description: Knife fuses, NH, thermoplastic bodies for knife fuses. Securing to DIN rail and by screws (size 4 screw fixation only). Range of protection accesories for live parts in order to obtain IP0 protection standard. Available with micro- switch contact for use with fuses with striker (see page 0). Volts: - up to 690V ac Amps: A Applications: Protection of industrial circuits and electrical apparatus Standards and Approvals: IEC 6069, VDE 066, DIN 460 Size Poles Current 160A 160A 50A 400A 60A Part References Screw connection SB00-S TB00-S SB0-S TB0-S SB1-S TB1-S SB-S TB-S SB-S TB-S DIN Rail connection SB00-D TB00-D TB00-D-IP0 SB0-D TB0-D SB1-D TB1-D SB-D TB-D SB-D TB-D With microswitch contact UP* 1 1 SB0-DMS 1 SB1-DMS 1 SB-DMS 1 SB-DMS A SB4-S SB4-DMS Neutral Size Current Part Ref NH SL00 NH0 160 SL0 NH1 50 SL1 NH 400 SL NH 60 SL NH SL4 Fuse extraction handle Size Part Ref C00- FEH 1 Protection accessories Size Current Separation Partition 4 Part Ref Fuse Cover 5 Part Ref Terminal Cover 1 Part Ref Part Ref Separator NH00 NH0 NH1 NH NH NH4 160A 160A 50A 400A 60A 150A SP00 SP0 SP1- SP1- SP SP4 FC00 FC0 FC1 FC FC CS00 CS0 CS1 CS CS BC00 BC0 BC1- BC1- BC IP Protection Kits TB00-D-IP0 FPK0-P FPK1-P FPK-P FPK-P Complete triple pole fuse base IP0 rated IP0 kit for TB0-D fuse base IP0 kit for TB1-D fuse base IP0 kit for TB-D fuse base IP0 kit for TB-D fuse base 6

36 for Knife Fuse and Fuseholders (NH) Knife Fuseholders (NH) Bases for fuseholders size 00 Bases for fuseholders size 0, 1,,, 4 Size A B C D E F G H I J K L M N O P Q NH MB NH M NH M NH M Bases for fuse holders size 4 7

37 for Knife Fuses and Fuseholders NH Knife Fuseholders (NH) Bases for fuseholders with micro circuit-breaker Size A B C NH NH NH NH NH

38 NH Fuse Rail Vertical Style BFRD 690V / 50-60A Sizes 1,, Description: Vertical Fuse Rails are designed to be used with NH Fuses. Fully protected against accidental contacts. Main features are: - Contact covers - Inter polar barriers - Label for protected circuit identification - Busbar mounting with screws Volts: - 690V ac Amps: A Applications: Disconnecting cabinets and low voltage distribution switchboards with busbar spacing of 185mm Standards and Approvals: CE, IEC EN , IEC EN : Size Rating Part Reference BFR1-K/LM/C (*) BFR1-K/LW BFR1-K/LL BFR-K/LM/C (*) BFR-K/LW BFR/K/LL BFR-K/LM/C (*) BFR-K/LW BFR-K/LL (*) with Leading-out Terminal cover Leading out Terminals Pressed-in Nuts with M10 Screw V-Shaped Clamps Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts Pressed-in Nuts with M10 Screw V-Shaped Clamps Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts Pressed-in Nuts with M10 Screw V-Shaped Clamps Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts 9

39 NH Fuse Switch Disconnectors Vertical Style BFD 690V / 50-60A Sizes 1,, A Size Rating Part Reference 1 Pole Switching Poles Switching 1 50 BFD1-1/LM BFD1-/LM Terminals Pressed-in Nuts with M10 Screw UP* 1 BFD1-1/LW BFD1-/LW V-shaped Clamps 1 Description: Vertical Fuse Switch disconnectors are designed to be used with NH Fuses. Enabling safe connection and disconnection operations. Main features are: - Measuring holes in the fuse cover - Possibility to lock the fuse cover - Label for protected circuit identification - Busbar mounting with screws. Volts: - 690V ac Amps: A Utilization category - 400V ac - ACB - 690V ac - ACB Applications: Distribution and Industrial switchboards with busbar spacing of 185mm Approvals: CE, IEC EN , IEC EN BFD1-1/LL BFD1-/LL 400 BFD-1/LM BFD-/LW Switch Disconnector for Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts Pressed-in Nuts with M10 Screw BFD-1/LW BFD-/LW V-Shaped Clamps 1 BFD-1/LL BFD-/LL 60 BFD-1/LM BFD-/LM * UP = Switch Disconnector for Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts Pressed-in Nuts with M1 Screw BFD-1/LW BFD-/LW V-Shaped Clamps 1 BFD-1/LL BFD-/LL Switch Disconnector for Busbar Systems 185mm Busbar Spacing Connects to Busbar with M1 bolts : 40

40 NH Fuse Switch Disconnectors Horizontal Style BFH 690V / A Size Rating Catalogue Number 1 Pole Poles Terminals UP* Sizes 000, 00, 1,,, 4A BFH000-1A/T BFH000-A/T Terminal Clips for 1.5- to 50mm cable BFH00-1A/F BFH00-A/F Terminal Screw M8 1 Description: Horizontal Switch disconnectors are designed to be used with NH Fuses. Enabling safe connection and disconnection operations. Main features are: - Measuring holes in the fuse cover - Possibility to lock the fuse cover - Label for protected circuit identification - Panel mounting with screws. On 5mm DIN Rail (only size 000) 1 50 BFH1-1A/F BFH1-A/F Terminal Screws M BFH-1A/F BFH-A/F Terminal Screws M BFH-1AF BFH-A/F Terminal Screws M1 1 4A 1600 LBS4/1 LBS4/ Terminal Screws xm1 1 * UP = Volts: - 690V ac / 50V dc (sizes 1,,) / 400V dc (size 000) Amps: A Utilization category - 400V ac - ACB - 500V ac - ACB - 690V ac - AC1B - 50V dc - DC1B (sizes 1,,) - 50V dc - DCB (sizes 000, 00) - 440V dc - DC0B Applications: Industrial control panels, motor control panels Approvals: CE, IEC EN , IEC EN : 41

41 DO Fuses Class gg 400V / - 100A Sizes D01, D0, D0 Size Current Colour Code Part Ref Voltage (V) Disconnection Power (ka) Description: DO fuses, gg range, for industrial and domestic protection. All the fuses incorporate a visual display of fuse actuation. Additional range of fuse holders and accesories. Volts: - 690V ac Amps: A IR - 50kA - 400V ac DO1 DO DO Pink Brown Green Red Grey Blue Yellow White Black Copper Silver Red NZ01 4NZ01 6NZ01 10NZ01 16NZ01 0NZ0 5NZ0 5NZ0 50NZ0 6NZ0 80NZ0 100NZ0 400V 100kA V 100kA V 100kA 10 Applications: Protection of electrical distribution circuits, cables and electrical apparatus (with the exception of motors). Standards and Approvals: IEC 6069, VDE 066, D01 D0 D0 In A In A In A

42 DO Fuseholders FN C, TFN C, FRN C, TFRN C 400V / A Sizes D01, D0, D0 Size Current Part Ref Screw Connection Single Pole Three Pole Part Ref DIN Rail Connection Single Pole Three Pole Description: DO fuse carriers in ceramic bodies with versions for securing to DIN rail or screw connection. Complete range of accessories. DO1 DO 16A 6A FN01C FN0C TFN01C TFN0C FRN01C TFRN1C FRNC0C TFRNC 15/5 (Three Pole) 15/5 (Three Pole) Volts: - 400V ac Amps: A Accessories Applications: Protection of industrial circuits and electrical apparatus. Accessories Size Current Fuse Base Type References Standards and Approvals: IEC 6069, VDE 066, Fuse Carrier DO1 DO 16 6 E14 E18 CN01 CN0 0 Size A DO1 5 DO 57 Gauge/ Calibration ring Covers DO1 DO DO1 1 pole DO 1 pole DO1 pole DO pole E14 E18 E14 E18 E14 E18 GN01 4GN01 6GN01 10GN01 16GN0 0GN0 5GN0 5GN0 50GN0 SFPCDO1 SFPCDO TFPCDO1 TFPCDO

43 D Fuses Class gg 500V / - 00A Sizes: DI, DII, DIII, DIV, DV Size Current Colour Code References Voltage (V) Disconnection Power (ka) Description: D fuses, gg range, for industrial and domestic protection. All the fuses incorporate a visual display of fuse actuation. Additional range of fuse holders and accesories. Volts: - 690V ac Amps: A IR - 50kA - 500V ac DI DII Pink Brown Green Red Grey Blue Yellow Pink Brown Green Red Grey Blue Yellow D16 4D16 6D16 10D16 16D16 0D16 5D16 D7 4D7 6D7 10D7 16D7 0D7 5D7 500V 100kA V 100kA 10 Applications: Protection of electrical distribution circuits, cables and electrical apparatus (with the exception of motors). DIII Black White Copper 5D 50D 6D 500V 100kA 10 Standards and Approvals: IEC 6069, VDE 066, DIV Silver Red 80D15 100D15 500V 100kA 10 Int A B Int A B Int A B Int A B

44 D Fuseholders SFD, TFD, SFRD C, TFR 500V / 5-6A Sizes: DII, DIII Size DI Current 5A Part Ref Screw Connection Single Pole SFD7 Part Ref DIN Rail Connection Three Pole Single Pole Three Pole TFD7 SFRD7 TFRD7 15/4 (Three Terminal) DIII 6A SFD TFD SFRD TFRD 15/6 (Three Terminal) Description: D fuse carriers in ceramic bodies with versions for securing to DIN rail or screw connection. Complete range of accessories. Accessories Volts: - 500V ac Amps: - 5-6A Accessories Fuse Carrier Size DII DIII Current 5A 6A Fuse Base Type E7 E References CD7 CD 50 0 Applications: Protection of industrial circuits and electrical apparaturs. Standards and Approvals: IEC 6069, VDE 066, Gauge/ Calibration Ring DII E7 GD7 4GD7 6GD7 10GD7 16GD7 0GD7 5GD7 50 Covers DIII DII 1 pole DIII 1 pole DII pole DIII pole E E7 E E7 E 5GD 50GD 6GD SFPRD7 SFPRD7 TFPCD7 TFPCD 50 0 Size A B C D E F DII DIII Size A B C D E F G H DII DIII Size A B C D DII E DIII E Pole A B C D DII DIII Pole A B C D DII DIII

45 Other Low Voltage Fuse Ranges North American Standard Fuses and Holders Description: Round fuses and holders in accordance with North American standards. Some ranges available with fuse actuation display. Makes: CUBEFuse TM low-peak, Fusetron, Limitron, CC- Tron, Dura-LagTM, T-Tron, Optima. Modular fuse holders (class CC, Midget and class J), fuse holders and isolator circuit-breakers. Volts: - 15 to 600V ac Amps: - 100mA to 6000A IR - 00kA Applications: General use for all types of protection and also motor protection. Standards and Approvals: Classes UL and CSA certified (consult us for types) : Miniature, class CC, class RK5, class RK1, class J, class G, Midget, class L. 46

46 Medium Voltage Fuses and Isolators Fuses for Voltage and Transformer Auxiliary Fuses Other MV Fuses DIN Fuses Description: Medium Voltage fuses with low current values, which allow for the associated system to be isolated in the event of a fault in the transformer circuit. Volts: - 1 to 6kV ac Amps: A IR kA Applications: For use in the voltage transformer primary circuit and in transformer auxiliary elements, etc. Description: Complete range of fuses (back-up, full range), and also motor protection. Volts: - 1 to 6kV ac Amps: - 6. to 160A : DIN 465, EN IEC , VDE Oil Fuses Standards and Approvals: BS69-1, IEC : Cylindrical body fuses with various length and diameter dimensions Description: Fuses for use in oil-insulated isolators and circuit breakers. Fuses fitted with a pyrotechnic plunger. Volts: -.6 to 4kV ac Amps: - 6. to 50A : BS 69-1, ESI 1-8, EN IEC Starter Motor Fuses Description: Fuses to provide protection against shortcircuit in motor and engine circuits. Volts: -.6 to 7.kV ac Amps: - 5 to 400A : Conform to British Standards, Standards UL and IEC DIN

47 Ultra Fast Fuses and Holders British Standard Fuses and Holders North American Standard Fuses and Holders Description: Standard British ultra-fast fuses. Possibility of adapting side indicators and auxiliary micro-switch as accessories. Volts: V ac / 150 to 500V dc Amps: A IR - 00ka RMS Sym Applications: Protection of semiconductors, UPS (ASI), rectifiers, static relays, converters etc Standards and Approvals: Conform to standards BS88-4, EN IEC , UL recognized : Various fuses sizes in single or double cylindrical body Description: Standard North American ultra-fast fuses. Fuse actuation display available on external and internal versions. Limited range of fuse bases Volts: - 10 to 1000V ac / 10 to 800V dc Amps: - 1 to 4000A IR - 00kA RMS Sym Applications: Protection of semiconductors, UPS (ASI), rectifiers, static relays, converters, etc. Standards and Approvals: UL Recognised, CSA, Component Acceptance : There are no standard dimensions with these types of fuses. 48