D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS. EURO/IEC Fuses & Accessories 500 VOLT D TYPE DIAZED FUSE-LINKS, SCREW CAPS AND FUSE BASES

Size: px
Start display at page:

Download "D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS. EURO/IEC Fuses & Accessories 500 VOLT D TYPE DIAZED FUSE-LINKS, SCREW CAPS AND FUSE BASES"

Transcription

1 D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS 500 VOLT D TYPE DIAZED FUSE-LINKS, SCREW CAPS AND FUSE BASES Ferraz Shawmut D fuse-links, also called Diazed type, are 500 Volts AC rated with 75kA interrupting rating. They have 4 physical sizes, DI, DII, DIII, and DIV and fit into special screw caps. All fuse-links have blownfuse indicators which are visible through the screw cap. Screw caps fit onto single pole bases which are screw or DIN rail mounted. All accessories such as covers, adapter rings, and gauge rings are described. Ferraz Shawmut is also comprised of Lindner GmbH, a major supplier of D Type Diazed fuses. These fuses are now being sold to markets worldwide through the Ferraz Shawmut distribution network. For Lindner information please contact your local representative. D FUSES Catalog Numbers, Ratings RATED In CAP CATALOG STANDARD SIZE CURRENT (A) THREAD NUMBER PACK/CTN G G G DI 10 E G G G G G G G DII 10 E G 5/ G G G G DIII 50 E G 5/ G Ratings AC: 500 Volts AC, 75kA interrupting rating gl-gg Performance Characterisitic Approvals Meet IEC, VDE and UNE Standards: IEC 269-3, 3A VDE 0636 UNE Approved by Lloyds Register of Shipping and Bureau Veritas 1 Ceramic body 2 Sand 3 Upper contact 4 Contact top 5 Lower contact 6 Melting element 7 Indicator DIV 80 R 1-1/ G R 1-1/ G G G G G F 16

2 D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS Dimensions Gauge Ring DI DII (10-25A) DIV Gauge Ring Dimensions SII SIII S1V Gauge Rings DII (2-6A) DIII A B C D E RATED in CAP CATALOG STANDARD SIZE CURRENT (A) THREAD NUMBER PACK G G G SII 10 E G G G G G SIII 50 E G G G G F SIV 80 R 1-1/4" G 50 Screw Caps RATED In CAP CATALOG STANDARD SIZE CURRENT (A) THREAD NUMBER PACK KII 25 E G 50 KIII 63 E G 50 KIV 100 R 1-1/4" G G Dimensions KII KIII KIV A B Adapter Rings DIII - DII G G F 17

3 D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS G G Single Pole Fuse Bases MOUNTING RATED In CAP CATALOG STANDARD METHOD SIZE CURRENT (A) THREAD NUMBER PACK EZII 25 E G 36 SCREW EZIII 63 E G 36 EZIV 100 R 1-1/ G 6 DIN RAIL EZPII 25 E G 24 EZPIII 63 E G 24 Dimensions EZ II EZ III EZ IV EZP II EZP III A B C D E F G F 18

4 D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS Melting Time - Current Data Amperes 2h 1h 30 min. 10 min. 5 min. 1 min. 10 s Time in Seconds 1 s 100 ms 10 ms 1 ms F Current in Amperes Peak Let-Thru Current Data Amperes Maximum Instantaneous Peak Let-Thru Amperes 100A 80A 63A 50A 40A 35A 32A 25A 20A 16A 10A 5A 4A 2A Available Current in RMS Symmetrical Amperes F 19

5 D Type (DIAZED) FUSE-LINKS & SCREW CAP HOLDERS 500V 380V 220V Operating I 2 t Pre-arcing I 2 t F 20

6 gi-gl-gg, am NH DIMENSION KNIFE-BLADE FUSE-LINKS NH DIMENSION KNIFE-BLADE FUSE-LINKS, FUSE BASES, AND ACCESSORIES Ferraz Shawmut NH Fuse-links, sizes 00, 0, 1, 2, 3 and 4 are rated 500 or 690 Volts AC with breaking capacities of 80kA or 120kA. All fuse-links include an indicator or striker and can accept a microswitch for remote signaling. They all have silver-plated knife blades and ceramic bodies. Accessories include 1, 2, 3 or 4-pole bases, barriers, shields, terminals, microswitch, etc. Ferraz Shawmut Circuit Protection Group is also comprised of Lindner GmbH, a major supplier of NH fuses. These fuses are now being sold to markets worldwide through the Ferraz Shawmut distribution network. For Lindner information please contact your local representative. Standards DIN NFC CEI A UNE VDE , 2-2 DIN Approvals Lloyd s Register of Shipping Bureau Veritas F gi-gl-gg gi-gl-gg am am FULL RANGE PROTECTION FULL RANGE PROTECTION SHORT CIRCUIT PROTECTION SHORT CIRCUIT PROTECTION Sizes 00, 0, 1,2, 3, 4 Fuse-link with Striker Sizes 00, 0, 1, 2, 3 Fuse-link with Striker 500 and 690 Volt ratings - 4A through 1250A All ratings include indicator Sizes 0, 1, 2, and 690 Volt ratings - 32A through 630A 500 and 690 Volt ratings - 10A through 630A All ratings include indicator Sizes 0, 1, 2, and 690 Volt ratings - 32A through 630A All equipped for microswitch mounting 1 Ceramic body 2 Quartz sand 3 Knife contact 4 Indicator 5 Melting element 6 End plate 7 Insulating joint All ratings include striker All equipped for microswitch mounting All ratings include striker Certification DIN VDE NFC 63210, IEC 269-1, 2, 2A UNE Approved by Lloyds Register of Shipping and Bureau Veritas F 29

7 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS G G G G G Catalog Numbers, Ratings gi-gl-gg RATED In RATED CATALOG INTERRUPTING STANDARD SIZE CURRENT (A) VOLTAGE NUMBER RATING (A) PACK 4 690V G 80, G G G G G G 00 C G G G G G G G G V G 120, G 6 690V G 80, G G G G 0 C G G G G G G G V G 120, G V G 80, G OS V G 120, G G V G 80, G G G G G G G G G G G G V G 120, G G G Table continued on next page G F 30

8 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS Catalog Numbers, Ratings gi-gl-gg (cont. ) RATED In RATED CATALOG INTERRUPTING STANDARD SIZE CURRENT (A) VOLTAGE NUMBER RATING (A) PACK G V G 80, G G G G G G G G G G G G V G 120, G G G Indicator G V G 80, G G G G V G 120, G F BEFORE AFTER V G 120, G G Dimensions 00 0 C C S A B C D E F G H I J K L M F 31

9 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS Catalog Numbers, Ratings gi-gl-gg with Striker SIZE RATED In RATED CATALOG INTERRUPTING STANDARD CURRENT (A) VOLTAGE NUMBER RATING (A) PACK G V G 80, G G G G 0 OS G G V G 120, G G G V G 80, G G G G V G 120, G G G G V G 80, G G G G G G V G 120, G G V G 80, G G G V G 120,000 Dimensions A B C D E F G H I J K L M N O P F 32

10 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS Melting Time - Current Data Amperes Time in Seconds F Current in Amperes Peak Let-Thru Current Data Amperes Striker Maximum Instantaneous Peak Let-Thru Amperes Available Current in RMS Symmetrical Amperes BEFORE AFTER F 33

11 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS Power Loss (Watts) at Rated Current RATED In SIZE CURRENT (A) 00 0 OS W 1.7 W W 1.8 W W 2.2 W 2.2 W W 2.6 W 2.5 W W 3.1 W 3.0 W W 3.7 W 3.6 W 3.5 W W 4.0 W 3.9 W 3.8 W W 4.5 W 4.4 W 4.3 W W 5.2 W 4.9 W 4.8 W W 6.2 W 5.8 W 5.8 W W 7.5 W 6.9 W 6.8 W W 8.5 W 8.1 W 7.9 W W 10.7 W 10.7 W 9.6 W 9.5 W W 13.5 W 13.5 W 11.9 W 11.5 W W 15.0 W 14.9 W 14.5 W W 16.2 W 16.7 W 16.0 W W 17.8 W 18.7 W 17.5 W W 23.8 W 23 W W 26.0 W 25 W W 30 W W 34 W W 40 W W W 67 W W W RATED In CURRENT (A) 100A 160A 250A 400A 630A 1000A VDE 0660 (500V) IEC (690V) UNE (500V) NFC (500V) VDE 0636 (690V) 12.0 W 10.0 W 25 W - 32 W 23 W 45 W 34 W 60 W 48 W 90 W 70 W VDE 0636 (500V) 7.5 W 16 W 23 W 34 W 48 W 110 W IEC 269 (500V) 7.5 W 16 W 23 W 34 W 48 W 90 W UNESA (500V) - 17 W 26 W 32 W 48 W - WDE W (500V) 7.5 W 16 W 21 W 32 W 42 W - Typical values allowed by the standards. F 34

12 gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS I 2 t Characteristics Discrimination I 2 t (Ampere 2 Seconds) F Fuse-link Rated Current In (A) 690V 500V 400V Operating I 2 t Pre-arcing I 2 t F 35

13 am NH DIMENSION KNIFE-BLADE FUSE-LINKS G G G G G G Catalog Numbers, Ratings am SIZE RATED In RATED CATALOG INTERRUPTING STANDARD CURRENT (A) VOLTAGE NUMBER RATING (A) PACK V G 80, G G G G G G G G G G G V G V G 80, G G G G G G G 0S V G V G 80, G G G G G G G V G V G 80, G G G G G G G G G V G V G 80, G G G V G 120,000 Microswitch Sizes 00, 1, 2, 3 Only G 1 Microswitch Mounted Blown-Fuse Indicator BEFORE AFTER F 36 BEFORE AFTER

14 am NH DIMENSION KNIFE-BLADE FUSE-LINKS Catalog Numbers, Ratings am with Striker G G Striker G G RATED In RATED CATALOG INTERRUPTING STANDARD SIZE CURRENT (A) VOLTAGE NUMBER RATING (A) PACK OS V G 80, G G G G G G G V G V G 80, G G G G G V G V G 80, G G G G G G G V G V G 80, G G G V G 120,000 F BEFORE AFTER Dimensions A B C D E F G H I J K L M N O P F 37

15 am NH DIMENSION KNIFE-BLADE FUSE-LINKS Melting Time - Current Data Amperes Time in Seconds Current in Amperes Peak Let-Thru Current Data Amperes Maximum Instantaneous Peak Let-Thru Amperes Available Current in RMS Symmetrical Amperes F 38

16 am NH DIMENSION KNIFE-BLADE FUSE-LINKS Power Loss (Watts) at Rated Current RATED CURRENT SIZE In (A) 00 0/0S W W W W 2.2 W W 2.4 W W 2.8 W W 3.6 W 3.6 W W 4.6 W 4.6 W 4.6 W W 6.0 W 6.0 W 6.0 W W 7.5 W 7.5 W 7.5 W W 9.5 W 9.5 W 9.6 W W 12.0 W 12.7 W 12.7 W W 16.4 W 16.4 W W 18.7 W W 21.5 W W 25.0 W W 29.0 W W 34.0 W W W 45.0 W W I 2 t Characteristics Discrimination 690V 500V 440V Operating I 2 t Pre-arcing I 2 t I 2 t (Ampere 2 Seconds) Fuse-link Rated Current In (A) F 39

17 gf, gi-gg, am CYLINDRICAL FUSE-LINKS DOMESTIC AND INDUSTRIAL CYLINDRICAL FUSE-LINKS Ferraz Shawmut gf, gi-gg and am fuse-links cover a wide range of physical sizes and ampere ratings for 250, 400, 500, and 690 volts AC. gf fuse-links are for domestic use. gi-gg and am fuse-links are for industrial applications. Most ratings are available with an optional indicator. All industrial fuse-links have the option of a built-in striker. All cylindrical fuse-links have ceramic bodies and silver-plated ferrules. gf gi-gg gi-gg am am FULL RANGE PROTECTION 7 physical sizes from 6.3 x 23mm to 10.3 x 38 mm 250 and 400 Volt ratings - 0.5A through 32A Most ratings available with indicator Meet IEC, NFC, UNE and British standards FULL RANGE PROTECTION 4 physical sizes from 8 x 31mm to 22 x 58 mm 400, 500 and 690 Volt ratings - 0.5A through 125A Most ratings available with indicator Meet IEC, NFC and UNE standards Approved by Lloyds Register of Shipping and Bureau Veritas FULL RANGE PROTECTION Fuse-links with Striker 2 sizes- 14 x 51mm and 22 x 58mm 400, 500 and 690 Volt ratings - 4A through 125A All ratings include striker Meet IEC, NFC and UNE standards Approved by Lloyds Register of Shipping and Bureau Veritas SHORT CIRCUIT PROTECTION 4 physical sizes from 8 x 31mm to 22 x 58mm 400, 500 and 690 Volt ratings -.16A through 125A Most ratings available with indicator Meet IEC, NFC and UNE standards Approved by Lloyds Register of Shipping and Bureau Veritas SHORT CIRCUIT PROTECTION Fuse-links with Striker 2 sizes - 14 x 51mm and 22 x 58mm 400, 500 and 690 Volt ratings - 2A through 125A All ratings include striker Meet IEC, NFC and UNE standards Approved by Lloyds Register of Shipping and Bureau Veritas F 2

18 gf CYLINDRICAL FUSE-LINKS Catalog Numbers, Ratings gf (Optional Blown-Fuse Indicator) SIZE RATED In RATED CATALOG NUMBER INTERRUPTING STANDARD (mm x mm) CURRENT (A) VOLTAGE w/o Indicator w/indicator RATING (A) PACK/CTN G 2 250V G - 6,000 10/ x G G G G G G G G 2 250V G G 6,000 10/ G G 8.5 X G G G G G G 6 250V G G 6,000 10/ X G G G G V G G 20,000 10/ G G G G G G G G 8.5 x G G G G G G G G G G G G V G G 20,000 10/ x G G G G 2 400V G G 20,000 10/ G G G G 8.5 x G G G G G G G G G G 10.3 x V G G 20,000 10/ G G F 1 Ceramic body 2 Sand 3 Indicator contact 4 Lower contact 5 Contact ring 6 Melting element 7 Indicator Dimensions FUSE SIZE (mm x mm) A B C 6.3 X X x x x x x Blown-Fuse Indicator BEFORE AFTER F 3

19 gf CYLINDRICAL FUSE-LINKS Melting Time - Current Data 2-16 Amperes, 250V Time in Seconds Melting Time - Current Data 2-32 Amperes, 400V Current in Amperes Time in Seconds Current in Amperes F 4

20 gi-gg CYLINDRICAL FUSE-LINKS Catalog Numbers, Ratings gi-gg (Optional Blown-Fuse Indicator) SIZE RATED In RATED CATALOG NUMBER INTERRUPTING STANDARD (mm x mm) CURRENT (A) VOLTAGE w/o Indicator w/indicator RATING (A) PACK/CTN G G G G V G - 20, G G G G G G G G 8 x G G 10/ G G G G G G G G V G - 120, G G G G G G G 10 X G G 10/ G G G G G G G G G G V G G 1 690V G - 80, G G G G G G G G G G 14 X G G 10/ G G G G G G V G G 120, G G V G G 2 690V G - 80, G G G G G G G G G G G G G G 22 x G G 10/ G G G G G G G G G G V G G 120, V G G F Blown-Fuse Indicator Dimensions BEFORE AFTER F 5 FUSE SIZE A B C 8 x x x x

21 gi-gg CYLINDRICAL FUSE-LINKS Catalog Numbers, Ratings gi-gg with Striker G G Striker BEFORE 1 Ceramic body 2 Sand 3 Indicator contact 4 Lower contact 5 Contact ring 6 Melting element 7 Indicator Dimensions AFTER SIZE RATED RATED CATALOG INTERRUPTING STANDARD (mm x mm) CURRENT In VOLTAGE NUMBER RATING (A) PACK/CTN. (A) 2 500V G 120, G G G G G 14 X G 10/ G G G G V G 4 690V G 80, G G G G G 22 X G 10/ G G G G G V G 120, G V G FUSE SIZE A B C D E 14 x x Melting Time - Current Data Amperes Peak Let-Thru Current Data Amperes Time in Seconds Maximum Instantaneous Peak Let-Thru Amperes Current in Amperes Available Current in RMS Symmetrical Amperes F 6

22 gi-gg CYLINDRICAL FUSE-LINKS I 2 t (Ampere 2 Seconds) I 2 t Characteristics Discrimination Power Loss (Watts) at Rated Current In RATED SIZE CURRENT (A) 10 x x x W W 0.5 W W 0.7 W 0.9 W W 1.0 W 1.3 W W 1.3 W 1.45 W W 1.5 W 1.85 W W 1.7 W 2.2 W W 2.0 W 2.3 W W 2.3 W 2.65 W W 2.7 W 3.1 W W 3.3 W 3.85 W 40 4 W 4.8 W W 5.3 W W 80 8 W W W F 690V 500V 400V Fuse-link In (A) Operating I 2 t IEC x x x 58 NFC A 40A 100A UBE W 5W 9.5 W These values are much lower than those allowed by the standards. Pre-arcing I 2 t Temperature Temperature rise reached by gi-gg fuse-links at In, measured on their upper contact. F 7

23 am CYLINDRICAL FUSE-LINKS Catalog Numbers, Ratings am (Optional Blown-Fuse Indicator) SIZE RATED In RATED CATALOG NUMBER INTERRUPTING STANDARD (mm x mm) CURRENT (A) VOLTAGE w/o Indicator w/indicator RATING (A) PACK/CTN G G G G Blown-Fuse Indicator 1 400V G - 20, G G - 8 x G - 10/ G G V G - 120, G G G G G G G G G G 10 X G G 10/ G G G G G G G G V G G G V G - 80, G G G G G G G G G G G G G 14 X G G 10/ G G G G G G V G G 120, G G G G V G G 4 690V G G 80, G G G G G G G G G G 22 x G G 10/ G G G G G G G G G G G G V G G 120, V G G Dimensions BEFORE AFTER FUSE SIZE A B C 8 x x x x F 8

24 am CYLINDRICAL FUSE-LINKS Catalog Numbers, Ratings am with Striker SIZE RATED In RATED CATALOG INTERRUPTING STANDARD (mm x mm) CURRENT (A) VOLTAGE NUMBER RATING (A) PACK/CTN G G 1 500V G 120, G G G G G 14 X G 10/ G G G G G G V G Striker BEFORE Dimensions AFTER 4 690V G 80, G G G G G 22 X G 10/ G G G G G V G 120, V G G F FUSE SIZE A B C D E 14 x x Melting Time - Current Data Amperes Peak Let-Thru Current Data Amperes Time in Seconds Maximum Instantaneous Peak Let-Thru Amperes Current in Amperes Available Current in RMS Symmetrical Amperes F 9

25 am I 2 t Characteristics Discrimination CYLINDRICAL FUSE-LINKS Power Loss (Watts) at Rated Current In RATED In SIZE CURRENT (A) 10 x x x 58 I 2 t (Ampere 2 Seconds) W W 0.3 W W 0.4 W 0.5 W W 0.5 W 0.6 W W 0.6 W 0.8 W W 0.8 W 1.0 W W 1.0 W 1.2 W W 1.2 W 1.5 W W 1.5 W 1.8 W W 1.9 W 2.0 W W 2.3 W 2.6 W W 3.2 W W 3.9 W W W W W 690V 500V 400V Fuse-link In (A) Operating I 2 t IEC x x x 58 NFC A 50 A 100 A UNE W 3 W 7 W These values are much lower than those allowed by the standards. Pre-arcing I 2 t Temperature Temperature rise reached by am fuse-links at In, measured on their upper contact. F 10

gi-gl-gg, am gi-gl-gg gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories

gi-gl-gg, am gi-gl-gg gi-gl-gg NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories ,, FUSE BASES, AND ACCESSORIES Ferraz Shawmut NH Fuse-links, sizes 00, 0, 1, 2, 3 and 4 are rated 500 or 690 Volts AC with breaking capacities of 80kA or 120kA. All fuse-links include an indicator or striker

More information

gg, am NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories NH DIMENSION KNIFE-BLADE FUSE-LINKS, FUSE BASES, AND ACCESSORIES

gg, am NH DIMENSION KNIFE-BLADE FUSE-LINKS EURO/IEC Fuses & Accessories NH DIMENSION KNIFE-BLADE FUSE-LINKS, FUSE BASES, AND ACCESSORIES , am, FUSE BASES, AND ACCESSORIES Ferraz Shawmut NH Fuse-links, sizes 000, 00, 0, 1, 2, 3, 4 and 4a are rated 500 or 690 Volts AC with breaking capacities of 80kA or 120kA. All fuse-links include an indicator

More information

Short Circuit. Sizes 0, 1, 2, and 690 Volt ratings - 32A through 630A All ratings include striker. 0% Lead

Short Circuit. Sizes 0, 1, 2, and 690 Volt ratings - 32A through 630A All ratings include striker. 0% Lead , am nh dimension knife-blade fuse-links, fuse bases, and accessories Ferraz Shawmut NH Fuse-links, sizes 000, 00, 0, 1, 2, 3, 4 and 4a are rated 500 or 690 Volts AC with breaking capacities of 80kA or

More information

NH fuse-links am VAC with striker, size 0, 1, 2, 3, 4

NH fuse-links am VAC with striker, size 0, 1, 2, 3, 4 NH fuse-links am 500-690VAC LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions according to DIN 43 620 Parts 1 to 4 Lead free contact blades 0% cadmium APPLICATIONS am: Partial purpose,

More information

NH fuse-links gg 500VAC top indicator/live gripping-lugs size 4, 4a

NH fuse-links gg 500VAC top indicator/live gripping-lugs size 4, 4a LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions in accordance with DIN 43 62 Live tags Top indicator Lead free contact blades % cadmium APPLICATIONS gg: General purpose (protection

More information

NH fuse-links gg 690VAC top indicator/live gripping-lugs size 4 and 4a

NH fuse-links gg 690VAC top indicator/live gripping-lugs size 4 and 4a NH fuse-links gg 69VAC NH fuse-links gg 69VAC LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions in accordance with DIN 43 62 Live tags Top indicator Lead free contact blades % cadmium

More information

Fuses for Semiconductor Protection - European Standard. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits

Fuses for Semiconductor Protection - European Standard. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits Fuses for Semiconductor Protection - European Standard Class: ar Voltage ratings: 660V AC to 1000V AC Current ratings: 16 A to 400 A Standards: UL 248-13 IEC 60269-1 & 4 DIN VDE 0636-40 DIN 43653 Approvals:

More information

NH fuse-links gg 400VAC double indicator/live gripping-lugs size 000, 00, 1, 2, 3

NH fuse-links gg 400VAC double indicator/live gripping-lugs size 000, 00, 1, 2, 3 NH fuse-links gg 4VAC double indicator/live gripping-lugs size,, 1, 2, 3 NH fuse-links gg 4VAC double indicator/live gripping-lugs size,, 1, 2, 3 LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS

More information

NH fuse-links am 690VAC top indicator/live tags size 4, 4a

NH fuse-links am 690VAC top indicator/live tags size 4, 4a NH fuse-links am 69VAC LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions according to DIN 43 62 parts 1 to 4 Non-isolated gripping lugs Double indicator Lead free contact blades %

More information

NH fuse-links gg 500VAC size 000, 00, 0, 1, 2, 3

NH fuse-links gg 500VAC size 000, 00, 0, 1, 2, 3 IEC LV NH fuse links with blade contacts The NH system is classified among plug-in fuse systems and is composed of: fuse-base, (possibly including terminal covers and phase barriers) fuse-link with blade

More information

Protistor size 70 gr 690VAC (IEC)

Protistor size 70 gr 690VAC (IEC) Protistor size 70 gr SEMICONDUCTOR PROTECTION FUSES SQUARE BODY HIGH-SPEED FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Excellent cycling capability Multiple body sizes and terminals or blades combination

More information

NH Solid Blades 690 VAC sizes 000 to 3

NH Solid Blades 690 VAC sizes 000 to 3 NH Solid Blades 6 VAC sizes 000 to gs-class Protistor NH 6 VAC fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. This range is a

More information

IEC Low Voltage Products Module 4

IEC Low Voltage Products Module 4 IEC Low Voltage Products Module 4 IEC Low Voltage Products NH DIN o All variations o Features benefits o Dual indication IEC Cylindrical Fuse System o Wide range of sizes and ratings o CCP NEW Product!

More information

CL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES

CL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES SERIES E-RATED / MEDIUM VOLTAGE FUSES 5kV AND 15kV CLIP-LOCK MOUNTED FUSES Amp-trap E-rated 5kV and 15kV fuses have 3" diameter barrels and mount in unique cam-locking clips, for superior connections as

More information

CS-3 SERIES E-RATED/MEDIUM VOLTAGE FUSES

CS-3 SERIES E-RATED/MEDIUM VOLTAGE FUSES SERIES E-RATED/MEDIUM VOLTAGE FUSES 5kV, 8kV and 15.5kV FERRULE MOUNTED FUSES Amp-trap E-rated 5kV 8kV and 15kV fuses have 2 or 3 inch diameter barrels with ferrules and are mounted in spring reinforced

More information

NH-Fuse system Low voltage

NH-Fuse system Low voltage 38103-FER NH-fuses A4-engl 22.10.2003 15:50 Uhr Seite 3 NH-Fuse system Low voltage 38103-FER NH-fuses A4-engl 22.10.2003 14:01 Uhr Seite 2 Utilization NH-fuses gg am gtr NH-fuses Utilization Categories

More information

General Purpose IEC Fuses

General Purpose IEC Fuses Line protection fuses gl-gg IEC 60269 parts1, 3 and 3-1 DIN VDE 0636 Parts 10, 30 and 31 Dimensions are stipulated in the following regulations: DIN 49360 D Fuse-links DIN 49515 D Fuse-links DIN 49367

More information

International products

International products Section Overview With over 25 locations around the globe, Littelfuse is the supplier of choice when it comes to international fuses, fuseholders and accessories. With an ever expanding portfolio of products

More information

Protistor size 31 ar 690VAC (IEC) / 700VAC (UL)

Protistor size 31 ar 690VAC (IEC) / 700VAC (UL) Protistor size 31 ar SEMICONDUCTOR PROTECTION FUSES SQUARE BODY HIGH-SPEED FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Multiple body sizes and terminals or blades combination ar Class according to IEC

More information

PSC SQUARE BODY 690/700 Volt SEMICONDUCTOR PROTECTION FUSES

PSC SQUARE BODY 690/700 Volt SEMICONDUCTOR PROTECTION FUSES PSC SQUARE BOY Ferraz Shawmut 690/700V PSC fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. These square body fuse-links are available

More information

Limitor -G General Purpose Fuses

Limitor -G General Purpose Fuses Limitor -G General Purpose Fuses HIGH VOLTAGE IEC FUSES DIN HV GENERAL PURPOSE FUSES FOR TRANSFORMERS FEATURES & BENEFITS Mersen HV fuse-links have been used for reliable protection in high-voltage switchgear

More information

Semiconductor Fuses European Fuses

Semiconductor Fuses European Fuses 66 grb 66 V AC grb - from up to 3 A Size: x38 The fuse preselection table below indicates: Fuse preselection - rated current (or ) I N - pre-arcing I²t (I²t p ) at ms - total ope I²t (I²tt) at 66 V, cos

More information

onlinecomponents.com

onlinecomponents.com 66 grb 66 V AC grb - from up to 3 A Size: x38 The fuse preselection table below indicates: Fuse preselection Rated current Pre-arcing I²t Total I²t at 66VAC I N (A) I²t p (A²s) I²t (A²s) - rated current

More information

Semiconductor (AC) fuses

Semiconductor (AC) fuses Main characteristics 450 TO 700VAC / 63 TO 2800A Recognized Exceptionally low I 2 T, Watt losses. Non-magnetic construction, Highly reliable low voltage Trip-indicator system, conformity to UL, IEC, DIN

More information

LOW VOLTAGE FUSES EUROPEAN NH KNIFE-BLADE FUSE SYSTEM

LOW VOLTAGE FUSES EUROPEAN NH KNIFE-BLADE FUSE SYSTEM NH SIBA NH Fuse-links with top and center indicator are available in a large variety of voltage ratings, body sizes and operating classes: Sizes: 000, 00, 0, 1, 2, 3 and 4 Voltage ratings: AC 400 / 500

More information

gg ferrule-style fuses

gg ferrule-style fuses gg 8.5 x 31.5-400V Size Current Voltage Cat. number Ref. number Cat. number Ref. number Voltage Ref. number Cat.number Pckg (A) (V) w/o indicator w/o indicator with indicator with indicator (V) with striker

More information

NEOZED D0 fuse-links gg 400/440VAC

NEOZED D0 fuse-links gg 400/440VAC NEOZED D0 fuse-links gg 400/440VAC LOW VOLTAGE IEC FUSES DIN LV FUSE-LINKS D0 FEATURES & BENEFITS The D0 fuse-system is installed in low voltage distribution units, where fuse-links are accessible to non

More information

Medium voltage fuses Medium voltage fuses

Medium voltage fuses Medium voltage fuses European Fuses DIN Fuses 7.2kV - 36kV IBD 7.2 UP TO 36 KV HIGH-VOLTAGE FUSES DESIGNED FOR POWER TRANSFORMER PROTECTION INTERIOR/EXTERIOR USE CERAMIC HOUSING MEDIUM CLASS TRIP-INDICATOR COMBINED WITH A

More information

Fuses for Semiconductor Protection European Standard Sizes 000 and 00. Protection of Power Semiconductors according to IEC and -4

Fuses for Semiconductor Protection European Standard Sizes 000 and 00. Protection of Power Semiconductors according to IEC and -4 URB Fuses for Semiconductor Protection European Standard Sizes 000 and 00 Class: ar Voltage ratings: AC 660 V AC 1000 V Current ratings: 16 A to 400 A Approvals: Standards: DIN 43653 IEC 60269-1 and -4

More information

E-RATED/MEDIUM VOLTAGE FUSES

E-RATED/MEDIUM VOLTAGE FUSES SRIS -RATD/MDIUM VOLTAG FUSS 5kV, 8kV and 15.5kV Ferrule mounted fuses Amp-trap -rated 5kV 8kV and 15kV fuses have 2 or 3 inch diameter barrels with ferrules and are mounted in spring reinforced clips.

More information

INDUSTRIAL CYLINDRICAL FUSE LINKS

INDUSTRIAL CYLINDRICAL FUSE LINKS gg Cylindrical gg class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube with high withstand to internal

More information

LENRK/LESRK CLASS RK1 DUAL ELEMENT TIME-DELAY FUSES

LENRK/LESRK CLASS RK1 DUAL ELEMENT TIME-DELAY FUSES LENRK/LESRK CLASS RK Catalog Number LENRK (. - 0A) 50 Volts AC or Less Catalog Number LESRK (.5-0A) 0 Volts AC or Less S LENRK 50V 0..5 75 0..5 5 0..5 9 50 5 0.5 50 0.. 70 0 0..5 5 0 50 7.5 90 0..5 0 50.

More information

CL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES

CL-14 SERIES E-RATED / MEDIUM VOLTAGE FUSES SRIS -RATD / MDIUM VOLTAG FUSS 5kV AND 15kV CLIP-LOCK MOUNTD FUSS Amp-trap -rated 5kV and 15kV fuses have 3" diameter barrels and mount in unique cam-locking clips, for superior connections as well as

More information

A240R/A480R/A072F/A072B MED. VOLTAGE FUSES / R-RATED

A240R/A480R/A072F/A072B MED. VOLTAGE FUSES / R-RATED A240R/A480R/A072F/A072B MED. VOTAGE FUSES / R-RATED R-RATED MOTOR STARTER FUSES Amp-trap R-rated fuses are current-limiting, high interrupting rating fuses intended for the short-circuit protection of

More information

Protistor size 14x51 ar 690VAC (IEC) / 700VAC (UL)

Protistor size 14x51 ar 690VAC (IEC) / 700VAC (UL) 690VAC (IEC) / VAC (UL) Protistor size 14x51 ar 690VAC (IEC) / VAC (UL) SEMICONDUCTOR PROTECTION FUSES IEC HIGH-SPEED CYLINDRICAL FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Low l²t for improved semiconductor

More information

CYLINDRICAL FUSES. 8x32. 10x38. 14x51. In REFERENCE U BREAKING CAPACITY REFERENCE U BREAKING CAPACITY PACKING (A) IEC /95/EC

CYLINDRICAL FUSES. 8x32. 10x38. 14x51. In REFERENCE U BREAKING CAPACITY REFERENCE U BREAKING CAPACITY PACKING (A) IEC /95/EC fuses 02 gg 04 am gg Cylindrical fuse links gg class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube

More information

Section ( VI ) TECHNICAL SPECIFICATIONS AND SCHEDULES

Section ( VI ) TECHNICAL SPECIFICATIONS AND SCHEDULES Section ( VI ) TECHNICAL SPECIFICATIONS AND SCHEDULES TECHNICAL SPECIFICATIONS L.V- HRC KNIFE (NH TYPE) FUSE-LINKS ( V.AC) HRC knife fuse-links (NH Type) must have a rated breaking capacity current of

More information

HHB. Medium Voltage Fuses British Standard. Introduction. Fuse-links for oil insulated switchgear

HHB. Medium Voltage Fuses British Standard. Introduction. Fuse-links for oil insulated switchgear HHB Medium Voltage Fuses British Standard For Oil Insulated Switchgears Introduction Medium voltage fuse-links according to British Standard are back-up fuse-links for the protection of substations up

More information

34-SDMS-02 SPECIFICATIONS FOR

34-SDMS-02 SPECIFICATIONS FOR SPECIFICATIONS FOR M V & L V FUSE LINKS This specification is property of SEC and subject to change or modification without any notice TABLE OF CONTENTS 1.0 SCOPE 3 2.0 CROSS REFERENCES 3 3.0 APPLICABLE

More information

Medium Voltage current limiting Fuse links

Medium Voltage current limiting Fuse links Medium Voltage current limiting Fuse links Type PCEF for indoor and outdoor use Rated Voltage 12-24 kv Current Rating 6 200A 1. General information P&C Medium Voltage fuse-links named PCEF are designed

More information

IEC Standard Back-Up Fuse-Links

IEC Standard Back-Up Fuse-Links 3 / 7.2 kv 6 / 12 kv 10 / 17.5 kv 10 / 24 kv 20 / 36 kv Ferrule German DIN Standard Beyond our line of ANSI / IEEE current-limiting fuses, Mersen offers a full line of medium voltage fuse links according

More information

A240R/A480R/A072F/A072B MED. VOLTAGE FUSES / R-RATED

A240R/A480R/A072F/A072B MED. VOLTAGE FUSES / R-RATED A240R/A480R/A072F/A072B MED. VOTAGE FUSES / R-RATED R-RATED MOTOR STARTER FUSES Amp-trap R-rated fuses are current-limiting, high interrupting rating fuses intended for the short-circuit protection of

More information

Protistor size 120 gr 750VDC (IEC)

Protistor size 120 gr 750VDC (IEC) Protistor size 12 gr SEMICONDUCTOR PROTECTION FUSES SQUARE BODY HIGH-SPEED FUSE-LINKS DC PROTECTION FEATURES & BENEFITS Multiple body sizes and terminals or blades combination Very low I²t Extremely fast

More information

Medium Voltage current limiting Fuse links

Medium Voltage current limiting Fuse links Medium Voltage current limiting Fuse links Type PCEF for indoor and outdoor use Rated Voltage 12-24 kv Current Rating 6 0A 1. General information P&C Medium Voltage fuse-links named PCEF are designed to

More information

NH HRC Fuses. IEC & British Standard Fuses NHG B

NH HRC Fuses. IEC & British Standard Fuses NHG B NH HRC Fuses NHG B Specifications Class: gg/ g L Description: DIN square bodied, dual indication industrial fuses. Construction: Steatite insulator, corrosionproof (aluminum) metal parts with full-contact,

More information

Glass fuse 16x5 mm time lag. Number Amp. Number Amp.

Glass fuse 16x5 mm time lag. Number Amp. Number Amp. Fuses Glass Accessoiries for fuses Fuses NDZ Fuses Diazed Fuses Neozed Fuses automatic Screw connection Fuses Knife Fuses plug/in standard and Maxi Fuse links melting plate Fuses porcelain Glass fuse 16x5

More information

HHD. High Voltage Fuses German DIN Standard. The temperature limiting function of the fuse striker pin. Design and construction.

HHD. High Voltage Fuses German DIN Standard. The temperature limiting function of the fuse striker pin. Design and construction. HHD High Voltage Fuses German DIN Standard For Air & Gas Insulated Switchgear Indoor and Outdoor Application The striker pin system is connected by means of a high resistance parallel conductor. After

More information

RAPIDPLUS. high speed fuse links for semiconductors

RAPIDPLUS. high speed fuse links for semiconductors high speed fuse links for semiconductors RAPIDPLUS 2 PAGE04 ar HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS PAGE05 gr HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS PAGE06 gs NH HIGH SPEED FUSE LINKS FOR SEMICONDUCTORS

More information

new NH fuse-links (HRC) rated rated breaking type current voltage capacity size description price

new NH fuse-links (HRC) rated rated breaking type current voltage capacity size description price NH fuse-links (HRC) rated rated breaking type current voltage capacity size description price gg fuselinks 500V (IEC60269 - VDE0636 - DIN43620) with fuse blown indication NH Fuse links gg class with high

More information

Low voltage NH knife-blade fuse-links

Low voltage NH knife-blade fuse-links Low voltage NH knife-blade fuse-links NV KOMBI advantages ETI is introducing a new generation of low-voltage fuse-links from size NV00C up to NV3 with new, dual indication of fuse-link operation, called

More information

Semiconductor Fuses Microswitches & Studs

Semiconductor Fuses Microswitches & Studs MICROSWITCH SYSTEMS ADAPTED TO THE FOLLOWING FUSES: - PSC sizes 0,,, / 70, 7, 7, 7 - Blade-type PSC (PA) sizes 0-, - / 70, 7, 7, 7 - PSC sizes 000 / 00 New MS L -5 B6 MS PA -5 HIGHLY RESISTANT STUDS OFFERING

More information

Ultra Rapid Fuses. For Semiconductor Protection

Ultra Rapid Fuses. For Semiconductor Protection UR Ultra Rapid Fuses For Semiconductor Protection Over many decades SIBA has developed a very comprehensive product line of Ultra Rapid fuses that has achieved worldwide acceptance. SIBA's worldwide distribution

More information

HHD HIGH VOLTAGE FUSES GERMAN DIN STANDARD. The temperature limiting function of the fuse striker pin. Design and construction.

HHD HIGH VOLTAGE FUSES GERMAN DIN STANDARD. The temperature limiting function of the fuse striker pin. Design and construction. HHD HIGH VOLTAGE GERMAN DIN STANDARD FOR AIR & GAS INSULATED SWITCHGEARS OUTDOOR SWITCHGEARS The striker pin system is connected by means of a high resistance parallel conductor. After melting the main

More information

Bussmann series NH catalogue. Leadership in circuit protection

Bussmann series NH catalogue. Leadership in circuit protection Bussmann series NH catalogue Leadership in circuit protection Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability and make the places

More information

URDC-PV. Features and Benefits FUSES. URPV Fuses for PV Semiconductor Protection. gpv. Class: Voltage ratings: 600V DC to 1500V DC.

URDC-PV. Features and Benefits FUSES. URPV Fuses for PV Semiconductor Protection. gpv. Class: Voltage ratings: 600V DC to 1500V DC. Fuses for PV Semiconductor Protection Class: gpv 0 Voltage ratings: 600V DC to 1500V DC Current ratings: 1 A to 450 A Standards: UL 2579 IEC 60 269-6 Approvals: E341342 E341490 Features and Benefits High

More information

Selection Guide. HHD-BPT, DIN Style, Current-Limiting, Back-Up, Potential Transformer Protection

Selection Guide. HHD-BPT, DIN Style, Current-Limiting, Back-Up, Potential Transformer Protection HHD-BPT Selection Guide HHD-BPT, DIN Style, Current-imiting,, Potential Transformer Protection Current ratings [A]; 0.5, 1, 2, 2.5, 3.15, 4, 5 E=192mm Page E=292mm Page E=367mm Page E=442mm Page E=537mm

More information

RAPIDPLUS. high speed fuse links for semiconductors

RAPIDPLUS. high speed fuse links for semiconductors high speed fuse links for semiconductors RAPIDPLUS 2 PAGE04 ar PAGE05 gr PAGE06 gs NH ar RAPIDPLUS ar fuse links are intended to clearing short-circuits and have been designed and manufactured to have

More information

NH DIN Dual Indication Fuse Links Class am, 690Vac, 6 to 500 Amps, Sizes 000 to 3 NH Series

NH DIN Dual Indication Fuse Links Class am, 690Vac, 6 to 500 Amps, Sizes 000 to 3 NH Series Description: A range of Class am square bodied industrial fuse links for a wide variety of motor protection applications. Packaging: MOQ: 3 Catalogue Symbol: Class of Operation: (amp)nhm(size)b-690 am

More information

TELECOMMUNICATIONS SPECIAL PURPOSE FUSES

TELECOMMUNICATIONS SPECIAL PURPOSE FUSES TELECOMMUNICATIONS SPECIAL PURPOSE FUSES Ferraz Shawmut telecommunications fuses are specially designed for the protection of telecommunications equipment which includes telephone switching equipment,

More information

HelioProtection HP15NH Photovoltaic fuse-links gpv 1500VDC

HelioProtection HP15NH Photovoltaic fuse-links gpv 1500VDC SPECIAL PURPOSE FUSES PHOTOVOLTAIC FUSES FEATURES & BENEFITS Mersen HP15NH photovoltaic (PV) fuse serie was engineered and designed specifically for the protection of photovoltaic systems. Helio-Protection

More information

FUSES. Safety through quality

FUSES. Safety through quality Safety through quality HH HIGH VOLTAGE Over many decades SIBA has developed a global product line of High Voltage Fuses that are comprehensive for any and all applications. Superior engineering, advanced

More information

Practical and completely safe

Practical and completely safe FUSE RRIERS >>> Practical and completely safe Isolating fuse carriers 058 06 058 28 Dimensions (p. 0) onform to standard IE 60269-2/2. and to NF 63-2. Isolators conform to IE 60947-3. Icc: - 20 k with

More information

FUSE-LINKS FOR PHOTOVOLTAIC APPLICATIONS

FUSE-LINKS FOR PHOTOVOLTAIC APPLICATIONS 1 2 06 PML 10/14x85 1500V FUSE HOLDERS 08 CLIP CONTACT FOR φ10 FUSE LINKS 05 PMX & 14x51 FUSE HOLDERS 02 gpv & 14x51 600 &/1100 FUSE LINKS 03 gpv 1200 & 1500V FUSE LINKS 04 gpv NH1, NH2 & NH3 FUSE LINKS

More information

fuse-links & fuse holders PHOTOVOLTAIC

fuse-links & fuse holders PHOTOVOLTAIC fuse-links & fuse holders 04 gpv FOR APPLICATIONS 04 gpv FOR APPLICATIONS 05 gpv & FOR APPLICATIONS 06 PMF FUSE HOLDERS FOR APPLICATIONS 07 ST & FUSE BASES FOR APPLICATIONS FUSE HOLDERS & BASES gpv 10x38

More information

HelioProtection HP10NH Photovoltaic fuse-links gpv 1000VDC

HelioProtection HP10NH Photovoltaic fuse-links gpv 1000VDC SPECIAL PURPOSE FUSES PHOTOVOLTAIC FUSES FEATURES & BENEFITS Mersen HP10NH photovoltaic (PV) fuse series was engineered and designed specifically for the protection of photovoltaic systems. Helio-Protection

More information

Special Purpose Fuses

Special Purpose Fuses 70 series 70 SERIES Color Coded tip Rated 125V AC, 300V DC UL Recognized 125 VAC, 1000A I.R.; 300V DC, 1000A I.R. Guide JDYX2, File E39265 Continuous rated current is 80% of 10 minute (shown in table).

More information

General Purpose US Fuses

General Purpose US Fuses SMARTSPOT with Maximum circuit protection Amp-trap 2000 SmartSpot AJT fuses now provide a visual open fuse indicator. With advanced material technology added to the existing product line the AJT fuse provides

More information

Modulostar. Motor Branch 400V AC - 690V AC up to 11 kw

Modulostar. Motor Branch 400V AC - 690V AC up to 11 kw Modulostar Motor Branch 400V AC - 690V AC up to 11 kw Innovations in MODULOSTAR to control energy in motor starters Already active in the field of motor starters with rated current over 32A per phase,

More information

ELEKTROTECHNISCHE WERKE FRITZ DRIESCHER & SÖHNE GMBH

ELEKTROTECHNISCHE WERKE FRITZ DRIESCHER & SÖHNE GMBH HH DRIESCHER - High-voltage high breaking capacity fuses from 1 kv up to 36 kv HH HH ELEKTROTECHNISCHE WERKE FRITZ DRIESCHER & SÖHNE GMBH D-866 MOOSBURG TEL. +9 87 61 6 81-0 FAX +9 87 61 68 11 37 http://www.driescher.com

More information

BETA Fuses and Fuse Systems

BETA Fuses and Fuse Systems Introduction Overview Application LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in the switchboards of power supply companies. Fuses

More information

W DATA SHEET: COMBINED RCD/MCB DEVICES BO, 3-POLE

W DATA SHEET: COMBINED RCD/MCB DEVICES BO, 3-POLE W DATA SHEET: COMBINED RCD/MCB DEVICES BO, 3-POLE W SCHRACK-INFO Combined RCD/MCB device Type-A: Protects against special forms of residual pulsating DC which have not been smoothed Line voltage-independent

More information

Applications. Distribution transformers up to 2000 kva High-voltage motors up to 3 MW Capacitors up to1200 kvar MV voltage transformers Cable feeders

Applications. Distribution transformers up to 2000 kva High-voltage motors up to 3 MW Capacitors up to1200 kvar MV voltage transformers Cable feeders Applications HV HRC (high-voltage high rupturing capacity) fuses are used for short circuit protection in high-voltage switchgear for the 50 to 60 Hz frequency range Distribution transformers up to 2000

More information

G eneral Purpose Fuses

G eneral Purpose Fuses G eneral Purpose Fuses North American Power Fuses AMP-TRAP2000 AMP-TRAP2000 AJT Class J - Time Delay 1 to 600A - - Motor, motor controller, control transformer, and circuit back-up protection. Space saving

More information

Selector guide. PSC Square body fuses Size 3X VAC End Contact Terminals. Features and Benefits

Selector guide. PSC Square body fuses Size 3X VAC End Contact Terminals. Features and Benefits Selector guide PSC Square body fuses Size 3X 500-700VAC End Contact Terminals December 2013 Issue 2 The IXYS UK range of 700V/690V protistor fuse links provides maximum flexibility in equipment design

More information

Leadership in Circuit Protection

Leadership in Circuit Protection Leadership in Circuit Protection Bussmann is now a part of Eaton Leadership in Circuit Protection. The only company that can provide a complete circuit protection solution for all applications. Only Eaton

More information

LPSRK100SP 100A 600V TD Dual Elem Class RK1 Low Peak Fuse

LPSRK100SP 100A 600V TD Dual Elem Class RK1 Low Peak Fuse LPSRK100SP 600V TD Dual Elem Class RK1 Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK100SP 600V Class RK1 Low Peak Dual Element, Time Delay Fuse 0.4100 (lbs/each)

More information

Semiconductor (AC) fuses

Semiconductor (AC) fuses x38 grb - 69VAC 69V AC grb - from up to 3 A Size: x38 The fuse preselection table below indicates: - rated current (or rating) I N - pre-arcing I 2 t (I 2 t p ) at ms - total operating I 2 t (I 2 tt) at

More information

Leadership in Circuit Protection

Leadership in Circuit Protection Leadership in Circuit Protection Bussmann is now a part of Eaton Learn more at Eaton.com/Cooper Leadership in Circuit Protection. The only company that can provide a complete circuit protection solution

More information

Low-Peak 600V Class RK1

Low-Peak 600V Class RK1 LPS-RK 600Vac/300Vdc, 1 10-60A, Dual Element, Time-Delay Fuses Dimensions - in 5" (± 0.31) 5.5" (± 0.31) Available with easyid open fuse indication 1/10 to 30A 0.81" (±0.008) 35 to 60A 1.06" (±0.008) Description:

More information

Utilisation category gl/gg 500VAC with combi indicator

Utilisation category gl/gg 500VAC with combi indicator DIN-fuse-links DIN fuse-links are used for the protection of electrical installations and equipment and are common for a wide area of applications. Standardised characteristics, technical data and dimensions

More information

T CLASS T FUSE BLOCKS

T CLASS T FUSE BLOCKS Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut

More information

Circuit Protection Solutions Product Guide

Circuit Protection Solutions Product Guide Circuit Protection Solutions Product Guide Product Guide Low Voltage Fuses and Fusegear NH DIN Industrial fuse links and bases Conforms to IEC 60269 & VDE 0636 General purpose full range & Motor protection

More information

fuses fuse holders CYLINDRICAL

fuses fuse holders CYLINDRICAL fuses fuse holders 02 gg FUSES 04 am FUSES FUSES 09 PMC COMPACT 09 -CC FOR CC CLASS FUSE-LINKS 11 PMB PLUG CONNECTION 11 CLIP CONTACT FOR φ10 FUSE-LINKS 10 PMF 11 BAC OPEN FUSE BASES 06 gg FUSES FUSES

More information

LPCC3 3A 600V TD Class CC Low Peak Fuse. Features amperage rating. Dimensions and Weight. Long Description. Manufacturer Information

LPCC3 3A 600V TD Class CC Low Peak Fuse. Features amperage rating. Dimensions and Weight. Long Description. Manufacturer Information 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 LPCC3 3A 600V TD Class CC Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPCC3

More information

Mica Element Support. Compacted Quartz Sand. Length B

Mica Element Support. Compacted Quartz Sand. Length B Construction A Tin-Plated Brass Caps Dimensional Information for Trans-Guard s NOMINAL 5.5 Resin-Rich Filament Wound Glass/Epoxy Body 3 75 80 200 3 50 5 80 5 125 3 50 5 5 100 23.0 50 Low Current Interruption

More information

CYLINDRICAL FUSES CYLINDRICAL FUSES

CYLINDRICAL FUSES CYLINDRICAL FUSES fuses 1 2 02 04 Cylindrical fuse links class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube with high

More information

Gears & Fuse Gears. Medium Voltage Fuses Clips. Clip lock design for CL-14 series. Mounting Details for Clip Lock Cat. No.

Gears & Fuse Gears. Medium Voltage Fuses Clips. Clip lock design for CL-14 series. Mounting Details for Clip Lock Cat. No. Clip lock design for CL-14 series Cat. No. 228-700-520 Cat. No. 228-700-530 (Pair at bottom) (Single at top) The Clip Lock design provides a reliable, high-pressure contact. Ferraz Shawmut CL-14 fuses

More information

Medium voltage fuses - European Fuses

Medium voltage fuses - European Fuses HV Back-up Fuse-Links according to IEC 60 282- HV fuse-links have been used for reliable protection in medium-voltage switchgear and controlgear and systems for decades. They protect apparatus and equipment

More information

British BS 88 Fuses. High Speed Fuses. Introduction. General Information

British BS 88 Fuses. High Speed Fuses. Introduction. General Information British BS 88 Fuses Introduction British BS 88 Contents Fuse Volts Amp Range Page 0-900 15-17 90-78-1 Accessories Indicator System & Fuse Bases British BS 88 Fuse Ranges Amps Vac Vdc -900 0 150-710 90

More information

High-voltage high-breaking capacity VV fuse-links

High-voltage high-breaking capacity VV fuse-links High- high- VV fuse-links [A] (ka) [mω] [W] [A 2 s] [A 2 s] 12 580 4 6,1 57 4 A 20 370 9 17,3 164 6 A 25 260 10 36 340 10 A 46 55 7 161 1 530 16 A 60 37 13 250 2 270 20 A 80 30 15 430 3 750 25 A 105 25

More information

NH (H.R.C) FUSES AND FUSE BASES

NH (H.R.C) FUSES AND FUSE BASES NH (H.R.C) FUSES AND FUSE BASES NH (H.R.C) Fuses NHC-FB (A...A) NH-FB (A...A) NH-FB (A...A) NH-FB (8A...4A) NH-FB (A...A) NH-FB (A...A) NH (H.R.C) Fuse Bases STEATIT NH-FA NH-FA NH-FA NH-FA NH-FA CONTENTS

More information

Bussmann series IEC cylindrical fuses

Bussmann series IEC cylindrical fuses IE and ritish Standard fuses 5 ontents ussmann series IE cylindrical fuses Section page escription Fuses S Type P and fuses (N, S and PON) HR Form II lass fuses (GL) 3 HRI industrial ceramic body fuses

More information

GMA GDB/GDA MDL MDA. Fuses SMALL DIMENSION. Item Number Amps Price. Item Number Amps Price. Item Number Amps Price. Item Number Amps Price

GMA GDB/GDA MDL MDA. Fuses SMALL DIMENSION. Item Number Amps Price. Item Number Amps Price. Item Number Amps Price. Item Number Amps Price SMALL DIMENSION GDB/GDA GMA Fast acting, low breaking Ceramic tube GDA only Glass tube with brass end caps GDB only.197"(5mm) x.788"(20mm) 250 volts AC or less UL Recognized, IEC 127-SI GDB10 Fast acting

More information

Accessories. For product data sheets, visit

Accessories. For product data sheets, visit British BS 88 Introduction British BS 88 Contents Fuse Volts Amp Range Page 0-900 188-190 90-791-19 Accessories Indicator System & Fuse Bases 195 British BS 88 Fuse Ranges Amps Vac Vdc -900 0 150-710 90

More information

NH LOW VOLTAGE a FUSE SYSTEM

NH LOW VOLTAGE a FUSE SYSTEM NH LOW VOLTAGE a FUSE SYSTEM NH DIN Low Voltage Fuse System from Cooper Bussmann High Breaking Capacity 400Vac, 500Vac and 690Vac Insulated Tag variants available Dual Indication VDE 066 Part 1 DIN 4 60

More information

High voltage high-breaking capacity VV fuse-links

High voltage high-breaking capacity VV fuse-links High fuse-links High fuse-links High high-breaking capacity VV fuse-links VV General information ET fuse-links named VV THERMO are designed to protect devices in switch-gears and other equipment (distribution

More information

IEC and British Standard Fuses.

IEC and British Standard Fuses. IEC and British Standard Fuses Section Contents Page Application Data..................... 45-46 CSA Type P and Type D fuses (CDS, CDN & PON)............................47 Tron HRC Form II Class C fuses

More information

Low Voltage Fuses General information

Low Voltage Fuses General information General information Description FUJI low voltage current-limiting fuses are designed to give protection to power supply and distribution circuits and equipment such as motor starter and semiconductors.

More information

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A

FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are

More information

LPSRK30SP 30A 600V TD Dual Elem Class RK1 Low Peak Fuse

LPSRK30SP 30A 600V TD Dual Elem Class RK1 Low Peak Fuse LPSRK30SP 30A 600V TD Dual Elem Class RK Low Peak Fuse Catalog Number Manufacturer Description Weight per unit Product Category LPSRK30SP 30A 600V Class RK Low Peak Dual Element, Time Delay Fuse 600 (lbs/each)

More information