Products Recommended for Steam Service

Transcription

1 oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking balls in sizes ¼" through. or further information see page 7. oss round oint ittings oss female ground joint fittings are available in plated steel and/or malleable iron in sizes ¼" through 6". or further information see page 8. oss Washer Seal ittings oss female washer seal fittings are available in plated steel and/or malleable iron in sizes through 6". or further information see page 9. oss ale s oss male stems are available in steel bar stock in sizes ¼" through ; malleable iron in sizes through ; 316 stainless steel in sizes ½" through and brass in sizes through. or further information see page 60. oss lamps oss clamps in the -bolt and 4-bolt style are available in plated malleable iron in sizes ¼" through ; stainless steel in sizes ½" through and brass in sizes ½" through. oss lamps in the three-piece style are available in plated malleable iron in sizes through 6". or further information see pages 63 and Steam auge Siphon 180 steam gauge siphon is available in red brass pipe in ¼". n order to prevent live steam from entering a pressure gauge bourdon tube a siphon filled with water should be installed between the gauge and the process line. or further information see page PS Steam all Valve 0 lb. steam ball valves are available with a threaded bronze valve, 316 stainless steel ball and stem in sizes ½" through. or further information see page 377. ote: Pressurized steam is an extremely dangerous commodity. nly hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! ever use an unapproved item for steam service. lways follow the manufacturers product recommendations for pressurized steam handling. 6 ixon Valve & oupling o., all P

2 ~ actory nly Steam Quick isconnect ouplings esigned exclusively for steam applications, the socket and plug are solid brass with stainless steel springs and locking balls. The socket has a large plated steel sleeve especially designed for easier gripping with gloves. Two ethylene propylene -rings in the socket and one ethylene propylene -ring in the plug provide double protection against leaks. Rated to 0 PS gauge saturated steam (338 ). Poppet Valve oupler ody PT 1/ 1/ 1-1/ ale PT 1/ 1/ 1-1/ oupling Warning: o ot isconnect Under Pressure!! 16-00S S S S S S $ Purpose: oss ouplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded (PT) outlet. eatures: The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment. The stem part that is clamped to the hose is the other half. The two halves are connected or disconnected by rotating the wing nut onto the spud. When connected they achieve a mechanical, as well as, a pressure seal. x ale ose ssembly ose Poppet Valve Plug ody PT 1/ 1/ 1-1/ oss oupling System oupling 1/ 1/ 1-1/ ale 17-00S S S S S S ose $ Services: oss ouplings are all-purpose hose couplings, universally recommended for steam hose connections. They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to. oss ouplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose. onsult the factory for specific media capabilities. Spud oupling x ose ssembly Spud oupling PT ale Spud ose aterials: ¼" to include: to 6" include: s: Plated steel Plated malleable iron through. Tubular steel - 6". ouble Spud ose ¼" to include: to 6" include: Spuds: Plated steel Plated malleable iron s: Plated malleable iron Plated malleable iron Worn-out hose couplings can be dangerous. They should be checked regularly and replaced when necessary. ach coupling user should review applications and add safety devices where indicated. P ixon Valve & oupling o., all

3 oss ouplings oss round oint Seal Positive etal-to-polymer Seal ~ actory nly leakproof seal is formed when the metal head of the stem makes contact with the patented polymer seat in the spud. The non-metallic polymer seat resists most chemicals found in manufacturing facilities. Recommended for steam service up to 40 asy to seal Works with existing ground joint fittings Plated steel and/or malleable iron Use with oss clamps found on pages 63 and 64. * 1/, and 6" come only with copper seat spuds. ** ot to be used with #0 or #306 oss clamps. ose Shank x PT 1/ * * 1/ 1-1/ 1-1/ -1/ 6" * omplete ** $ ** $ $ P.T.P.T ose Shank x PT 1/ * * 1/ 1-1/ 1-1/ -1/ 6" * Spud $ ale Spud $ oss couplings and the steam quick disconnects on page 7 are the only ixon couplings recommended for steam service. ouble Spud $ ixon Valve & oupling o., all P

4 ~ actory nly Washer Type linger washer is inserted between the stem and spud. leakproof seal is formed by rotating the wing nut and hammering it tight. Plated steel and/or malleable iron oss ouplings oss Washer Seal ose Shank x PT 1/ 1-1/ 1-1/ -1/ omplete W3 W6 W6 W36 W1 W61 W81** W96 W111 $ SS ** $ $ * Washer is a linger nylon, nitrile bonded, evlar reinforced material. ** ot to be used with #0 or #306 oss clamps..p.t.p.t ose Shank x PT 1/ 1-1/ 1-1/ -1/ Spud $ W W3 W8 W13 W18 W3 W8 W38 ale Spud $ ouble Spud $ W W W1 W1 W17 W17 W7 W3 W37 W47 Washer * $ tem will be discontinued when stock is depleted. ptional./ox Quantity Shown P ixon Valve & oupling o., all

5 oss ouplings oss ale s ~ actory nly ose x PT 1/ x 1/8" 1/ x 1/ 1/ x x 1/ x x 1/ 1/ x 1/ 1/ x 1/ x 1/ 1/ x x 1/ x x x x Steel ar Stock S4X S S S6X4 S S6X8 S8X4 S8X6 S1 S8X1 S1X8 S6 S1X16 S16X1 S11 $ ½" 6" 1-1/ 1-1/ -1/ alleable ron S16 S1 S6 S31 S36 S46 $ * tubular steel Use with oss clamps on pages 63 and 64 or safety tags and safety tape see page 434 ptional./ox Quantity Shown P-oss ale s Plated Steel P16 $4.00 P P P P P P oss ose enders oss Spud x ose ollars to engage grip fingers of oss clamps. -, plated malleable iron; ½" and 6", plated steel ½" 1/ 1-1/ 1-1/ -1/ 316 Stainless Steel RS1 $46.0 RS RS RS RS RS RS RP36 * RP46 *~ 6.00 ale PT nd 316 Stainless RP36 $ RP eveled nd Unplated Steel P6 $39.0 P Polymer Seat opper Seat $ $ / 1-1/ ½" 6" rass S6 $19.00 S S S S S Schedule 80* Plated arbon Steel P16-80* $4.00 P1-80* 4.00 P6-80* * Schedule 80 stems meet P 8 $ $ ixon Valve & oupling o., all P

6 ~ actory nly oss ouplings 316 Stainless Steel oss round oint Shipped from factory only. Recommended for steam service up to 40. R6 R36 R1 R61 R81 * $ R6 R11 R16 R1 R6 * $ R1 R1 R17 R17 R7 ut $ Spud R8 R13 R18 R3 R8 $ * ot to be used with #0 or #306 oss clamps rass round oint Shipped from factory only. ut Spud ~ * $ ~ 1 6 * $ * ot to be used with #0 or #306 oss clamps $ ~ 3 8 $ rass Washer Style available. onsult factory for pricing and availability. Stainless Steel Washer Style round oint Shipped from factory only. ut Spud Washer * RW6 RW36 RW1 RW61 RW81 ** $ R6 R11 R16 R1 R6 ** $ R1 R1 R17 R17 R7 $ R8 R13 R18 R3 R8 * Washer is linger nylon, nitrile bonded, evlar reinforced material. $ W1 W1 W17 W17 W7 $ ** ot to be used with #0 or #306 oss clamps. P ixon Valve & oupling o., all

7 oss ouplings oss oledall ittings ~ actory nly oss oledall fittings are designed for air and liquid applications where a permanent, low profile clamping system is desired. oth fittings are supplied with carbon steel ferrules. onsult the factory for swage and/or crimp specifications. ot for steam services. ose.. alleable ron rom: To: 1-/6 1-1/6 1-19/6 1-30/6 1-3/6 1-39/6 1-1/16" -1/6-9/6-9/16" -41/6-49/6 3-9/16" 3-41/6 3-49/6 1-14/6 1-18/6 1-/6 1-34/6 1-38/6 1-4/6-1/8" -1/ -/8" - -7/8" 3-/8" 3-3-7/8" 6P1 6P 6P3 36P1 36P 36P3 61P1 61P 61P3 81P1 81P 81P3 111P1 111P 111P3 $ R61P1 R61P R81P1 R81P Stainless Steel $ oss dapters These fittings have male or female PT threads and are designed to fit the standard ground joint spuds on page 8. ouplings come with adapter and wing nut. or safety tags and safety tape, see page 434. oss ale PT dapter S6 S11 S1 S6 * $ * ote: S6 uses a special wing nut, part # 7-3. oss aps and and hain ength oss PT dapter S6 S11 $ ote: Wing nut is permanently attached on the size. 1S 17S 7S 37S $ ptional./ox Quantity Shown or best results, use with washer style spuds and washers on page 9. Supplied with 1 chain and washer. ote: oss wing nut caps are not intended for pressure applications. 6 ixon Valve & oupling o., all P

8 ~ actory nly ose ose.. Plated alleable ron.. rom: To: 1/ 1/ 1/ 1/ 1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ 1-1/ -1/ -1/ -1/ 36/6 44/6 /6 60/6 1-4/6 1-/6 1-1/6 1-0/6 1-3/6 8/6 1-6/6 1-34/6 1-44/6 1-60/6 1-3/6 1-44/6 1-0/6 1-6/6-8/6 1-/6-4/6-1/6-4/6-36/6-16/6 -/6-3/6-3/6-48/6-48/6 3-6/6 3-4/6 3-6/6 3-3/6 3-3/6 3-3/6 3-48/6 3-/6 4-4/6 4-1/6 4/6 6/6 60/6 1-4/6 1-1/6 1-18/6 1-0/6 1-3/6 1-44/6 1-/6 1-36/6 1-46/6 1-60/6-8/6 1-0/6 1-6/6-6/6-4/6-4/6-14/6-8/6-16/6-4/6-36/6-48/6-3/6-34/6-48/6-0/6 3-4/6 3-4/6 3-8/6 3-3/6 3-8/6 3-60/6 3-48/6 3-60/6 4-4/6 4-1/6 4-8/6 4-3/ U9S 4 U U U U U U U8 7 1 U U U $ oss ouplings oss lamps Stainless Steel Torque R4 $ RU U9 R ~ RU U14 R14 ~ R19 ~ ~ RU U4 ~ R RU U9 ~ R ~ RU rass Torque $ gripping fingers Will become obsolete as inventory is depleted. 3 Torque applies to plated malleable iron and stainless steel clamps 4 nvestment cast carbon steel ot to be used with 81, 6, W81, 6, R81, R6, 81, 6, RW81, R6 -olt Type 4-olt Type ripping ingers 4-olt Type 4 ripping ingers 1 The bolts used in the oss interlocking clamps are not standard bolts. They vary from standard bolts in their length, diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only. ixon recommends using only factory supplied replacement bolts. Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. See page 444 for raction to ecimal conversion chart. o not lubricate nuts and bolts. Recommended torque rating in ft. lbs. ptional./ox Quantity Shown P ixon Valve & oupling o., all

9 Three Piece 6-olt Type ose.. 6" 6" oss ouplings oss lamps ose.. Plated alleable ron rom: To: 4-16/6 4-40/6 4-6/6-16/6-34/6 6-6/6 7-3/6 4-/6 " -16/6-38/6-60/6 7-4/6 8" S39 4 S49 U ~ ~ actory nly The bolts used in the oss interlocking clamps are not standard bolts. They vary from standard bolts in their length, diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended that they be reused, as they are designed for a single bend only. ixon recommends using only factory supplied replacement bolts. Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. See page 444 for raction to ecimal conversion chart. o not lubricate nuts and bolts. Recommended torque rating in ft. lbs. ptional./ox Quantity Shown $ Torque round oint ir ammer ouplings round oint Type - rounded steel head of stem fits concave inserts in spuds for superior sealing. Use with oss clamp. omplete Plated Steel alleable ron Style ompact ose.. & PT s 1/ oarse ut 1-31/6.. x 8 T.P $ $ $ eavy 1-47/6.. x 8 T.P.. 1 $ $ $ Style PT s oarse Spud Plated Steel w/ opper Seat Spud Plated Steel w/ opper Seat ale Spud Plated Steel w/ opper Seat ouble Spud ompact eavy 1/ 1-31/6.. x 8 T.P /6.. x 8 T.P $ $ $ $ $ $ ixon Valve & oupling o., all P