For the right ball valve
|
|
- Carmella Lambert
- 5 years ago
- Views:
Transcription
1 A or the right ball valve usinesses from food and beverage to pharmaceutical and cosmetics have trusted radford sanitary ball valves for many years. he reason: ixon anitary has the quality valves they need. radford ball valves are available in ½" - " and in various end connections such as clamp, buttweld, -line, bevel seat, ohn erry, and -line. all for delivery as these ends are special order. Actuation is available in double acting, air-tospring and electric. lease call for delivery as availability varies according to the requirements. ixon anitary's wide ball valve selection is available from our thirteen distribution centers - so we can ship the parts you need within twenty-four hours. radford quality: maintaining the standard he anitary tandard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. he standard, developed in collaboration by a group of processors, suppliers, regulatory officials and sanitation specialists, is generally accepted by federal, sate and local regulatory authorities. ur products have earned the symbol, which requires an annual assessment to make certain each product conforms in all respects to the published standard. radford ball valves carrying the symbol conform to the sanitary standards for valves for milk and milk products (#68-00). ixon anitary is proud to be a participant in the program. W ixon anitary 006 atalog
2 get control with radford roduct pecifications ize range: ½" - ".. (050-00) aterials: (6) 8 ype of ends available: lamp -line uttweld evel eat -line ohn erry ome items may not be in stock. all for price and availability. f your part is not listed, call us; we may still be able to get it for you. rdering nstructions - way valve part numbers A = ball. = valve. = -way. = non-encapsulated = encapulated with elevated pad and live loaded packing 5. = virgin = stainless steel reinforced = 5% fiberglass filled = W polyethylene = 5% carbon = (-) 6. reserved 7, 8, 9. ize = [ie; 050=½"] 0,. nd configuration; =clamp, =butt weld, =female -line, =male -line, =threaded bevel, = plain bevel, =-line, =ohn erry plain, =ohn erry threaded. eserved. A = standard handle,. digits = actuator possibilities (call factory) - way valve part numbers A = ball. = valve. = -way, = -way. ntry: = side 5. = virgin 6. all configuration: = port = port 7. ort: = full = reduced (½" valve only available in full port, " valve only available in reduced port) 8, 9, 0. ize = [i.e.; 050=½"]. nd configuration; =clamp, =buttweld, =female -line, =male -line, =threaded bevel, = plain bevel, =-line, =ohn erry plain, =ohn erry threaded,. - A = standard handle, digits = actuator possibilities (call factory) [if actuated-continue below]. low plan (call factory) 5. esignation of initial ball position or position with extended spring A- (call factory) ixon anitary 006 atalog A W
3 A ize ½" ¾" " ½" " ½" " " -Way -piece ncapsulated all alve A he radford ball valve is designed as a three piece construction with swing out center section for easy field repair and cleaning in place. perating parts are stainless steel type 8 (6) conforming to A A5, solution annealed and passivated for corrosion resistance. All major parts are traceable for chemistry (ask for s). he ball is fully encapsulated to eliminate cavities for bacteria to form. ive loaded stem packing provides a leak proof design which allows time for scheduled maintenance. he full port design creates less turbulence and is self draining. levated, integral 5 mounting pad is part of the valve design making actuation easy without any custom brackets. he handle makes this suitable for lock-out / tag-out applications. is polished to A or better low-out-proof stem design arious ends available: clamp, buttweld, -line, -line, bevel seat and ohn erry irect mount actuation: double, air to spring, and electric ated at,000 W (water, oil and gas), most applications ive loaded stem packing imensions Width reak torque (in-lbs.) Weight (lbs.) ote: drawing is for dimensional information only. pecifications and dimensions are subject to change without notice W ixon anitary 006 atalog
4 ize ½" ¾" " ½" " ½" " -050-A -075-A -00-A -50-A -00-A -50-A -00-A " -00-A ote: many other end configurations and seat materials available (see ordering instructions on page 5) ½" - " valves have bolts, nuts and washers ½" and " valves have bolts, 8 nuts and 8 washers " valve has 6 bolts, nuts and washers -Way -piece ncapsulated all alve avity illed all alve - art umber irgin valve 8/6 8/6 8/6 iton 6 iton 8 olymer aterials ist for tem art ame aterial ty ody (--*) lamp end (--*) all (--*) olt, ut & Washer it (--*) Washers a uts b olts epair it 5 5a 5b 5c 5d tem it 6 6a 6b 6c 5b 5c (-- *) ody eal eat ring hrust washer tem packing -ring (-- *) tem land nut evel washer-spring steel land ring hrust washer tem packing -ring 5d top it (-- *) 7 topper andle Assembly (--A *) 8 andle cover 8a andle 8b andle bolt 8c andle cap 8d Washer 8e ock plate ++ indicates seat material = irgin = 5% glass = 5% carbon = stainless filled = W polyethylene = (-) ixon anitary 006 atalog rdering ey * list size (050-00) ote: replaced * ist size (050-00) it items are not sold individually it items are not sold individually 55 A W
5 A -Way -piece on-ncapsulated all alve he radford ball valve is designed as a three piece construction with swing out center section for easy field repair and cleaning in place. perating parts are stainless steel type 8 (6) conforming to A A5, solution annealed and passivated for corrosion resistance. All major parts are traceable for chemistry (ask for s). ntegral 5 mounting pad is part of the valve design making actuation easy without any custom brackets. he handle makes this suitable for lock-out / tag-out applications. is polished to A or better low-out-proof stem design arious ends available: lamp, uttweld, -line, -line evel seat and ohn erry Actuation available: double, air-to-spring, and electric ated at,000 W (water, oil and gas), most applications ize ½" ¾" " ½" " ½" " " A imensions Width reak torque (in-lbs.) Weight (lbs.) W ixon anitary 006 atalog
6 ize ½" ¾" " ½" " ½" " " -Way -piece on-ncapsulated all alve ote: many other end configurations and seat materials available (see ordering instructions on page 55) ½" - " valves have bolts, nuts and washers ½" and " valves have bolts, 8 nuts and 8 washers " valve has 6 bolts, nuts and washers ody (-- *) lamp end (-- *) all (-- *) -- * Washers uts olts --* ody eal eat ring hrust washer tem packing -- * tem land nut land ring hrust washer tem packing 5c top it -- * 7 topper andle Assembly --A * 8 andle cover 8a andle 8b ock plate 8c andle nut 8d Washer * ist size (050-00) it items are not sold individually * () for ½" - " valves () for ½" - " valves on-cavity illed all alve - 8/6 8/6 8/6 6 8 olymer aterials ist tem art ame aterial ty olt, ut & Washer it a b epair it 5 5a 5b 5c tem it 6 6a 6c 5b art umber irgin seat valve with clamp ends -050-A -075-A -00-A -50-A -00-A -50-A -00-A -00-A ixon anitary 006 atalog * * rdering ey = irgin = 5% glass = 5% carbon = stainless filled = W polyethylene = (-) 57 A W
7 A W 58 is polished to A or better low-out-proof stem design arious ends available: lamp, uttweld, -line, -line evel seat and ohn erry Actuation available: double-acting, air-to-spring, electric -Way ncapsulated all alve ize ½" ¾" " ½" " ½" " " A he radford -way ball valve is designed with a balanced four seat construction. ive loaded stem packing provides a leak-proof design allowing time to schedule maintenance. perating parts are stainless steel type 8 (6) conforming to A A5, solution annealed and passivated for corrosion resistance. All major parts are traceable for chemistry (ask for s). t is fully encapsulated to eliminate cavities for bacteria to form. ultiple flow patterns allow for more versatility in your processing applications. ntegral 5 mounting pad is part of the valve design making actuation easy. he handle makes this suitable for lock-out / tag-out applications. ated at,000 W (water, oil and gas) most applications ive loaded stem packing and flow patterns (side entry only) imensions (inches) Ø Width reak torque (in-lbs.) Weight (lbs.) ixon anitary 006 atalog
8 ize ½" ¾" " ½" " ½" " " ote: many other end configurations and seat materials available (see ordering instructions on page 5) umber otation art umber port valve 050-A 075-A 00-A 50-A 00-A 50-A 00-A 00-A -Way ncapsulated all alve avity illed -way all alve - art umber port valve 050-A 075-A 00-A 50-A 00-A 50-A 00-A 00-A tem art ame aterial ty 5 8 epair it 6 6a 6b 6c 7a 7b tem it 7 7a 7b 7c 7d 7e 6c umber body (-#*) clamp end (-#++*) cover plate (-#*) ball (-# *) bolts (-#*) stopper (-#*) -#* encapsulated seat body seat -ring gasket stem packing -ring thrust washer -#* stem -ring thrust washer stem washer spring washer gland nut stem packing low lan ptions A,,,, A otation 80 attern (top view, way, side entry) umber otation way available, call for information aterials ist for 8/6 8/6 8/6 8/6 6 iton 6 iton low lan ptions A,,,,,, A, A, attern (top view, way, side entry) low lan ptions A, A,, andle Assembly -#A* 9 handle cover olymer = ball 9a handle = ball 9b handle nut () for ½"-" valves 9c washer 0 () for ½"-" valves () for ½"-" valves it items are not sold individually ixon anitary 006 atalog ** ** # = ull ort = educed ort * ndicates size (050-00) % = virgin = 5% glass = 5% carbon = stainles filled = W polyethylene = (-) 59 A W
get connected with clamp fittings Bradford Company, Inc
get connected with clamp fittings Bradford Company, Inc. 800.789.78 www.bradfordfittings.com 2 clamp fittings clamps end caps hangers ferrules elbows tees laterals reducers For the right fitting at Your
More informationSanitary Fittings & Tubing
anitary Fittgs & ubg pecifications anitary tubg is 3- approved taless steel sanitary tubg dimensions and materials conform to M 269/270 and 3- pproved taless steel plate flanges made from M 240 (Plate)
More informationDixon Sanitary General Products. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The
More informationValves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
More informationSection G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
More informationValves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 I PURITY TUBE ULL PORT 3-PIECE BALL VALVE Design & eatures Body Material 316L Stainless Steel ASME / BPE-2009 Designed specifically for the demanding process requirements
More informationS E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationProducts Recommended for Steam Service
oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking
More informationPRESSURE REDUCING MODULAR VALVE. 40 to 300l/min 25,35MPa
RSSUR RU UR VV Reducing to l/min,a eatures qhis modular valve makes the pressure in part of the circuit lower than the main circuit. wven when pressure changes in the primary main circuit, the reduced
More informationThe VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More informationSanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
More informationBall Valves. Features
Catalog HY14-252/U Technical Information eries V3D General Description eries V3D is a 3-way diverter. The product is rated at 27 ar (3 PI) and designed to economically satisfy many 3-way applications.
More informationKTM SERIES EF190FE TWO-PIECE FULL BORE BALL VALVES SPLIT BODY FLANGED BALL VALVE - FUGITIVE EMISSION CERTIFIED AND FIRE TESTED
M EIE EF190FE WO-PIECE FLL BOE BALL VALVE PLI BODY FLANGED BALL VALVE - FGIIVE EMIION CEIFIED AND FIE EED igh performance two-piece ball valve for demanding process applications where fire-safe and fugitive
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
More informationHigh Pressure Ball Valves Series BVHP. General Description. Operating. Specifications. Features. Performance Curves
Technical Information igh Pressure all Valves eries VP General Description eries VP valves are used for shut-off applications and are rated at 414 ar (6000 PI). The wide variety of porting options plus
More informationSERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
More informationItem 501T Multi-Way Ball Valve
Item T MultiWay Ball Valve 000/00 WOG/ PN/ IZE: /"" the media from leaving in the cavity for easy cleaning & antisticky of the ball. But the internal body need to be machining first. As for the soft kits,
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationSwing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
More informationSection G TOP-FLO Series 77 High Purity Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationESV - EGMO Sampling Valves
Hygienic Flow Equipment ESV - EGMO Sampling Valves Hygienic sampling valves for pharmaceutical & sanitary applications The EGMO Sampling Valves are uniquely designed for process quality control, which
More informationKTM BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS EF190 - TWO-PIECE BALL VALVE
M BALL VALVE FO INDIAL AND POCE APPLICAION EF190 - WO-PIECE BALL VALVE igh performance two-piece ball valve for demanding process and utility applications FEAE ENEAL APPLICAION he EF190 has been designed
More informationManual and Specialty Valves. Efficient Fluid Processing. ease and thoroughness of CIP incorporating new technology and innovation
Valves are important to any processing system. That s why many trust the experience and innovation of Alfa Laval. Manual and Specialty Valves Efficient Fluid Processing The key to efficient fluid processing
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
More informationBall Valves. Features
Technical Information General Description eries BV3H and BV4H are true 3-way and 4-way high pressure valves, incorporating many of the advanced features of the 2-way product. These products come in steel
More informationSection G TOP-FLO T4V Sanitary V-Port Control Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
More informationCentrifugal Pumps. Distributed by: 7033 Telford Way #20, Mississauga, ON L5S 1V4 Tel: Toll Free:
Centrifugal Pumps Distributed by: 733 Telford Way #2, Mississauga, ON L5S 1V4 Tel: 95.677.9 Toll Free: 1.8.486.7863 www.tricanada.com Engineered For Lasting Performance Fristam is an international manufacturer
More informationBall Valves. Features
Catalog HY14-252/U Technical Information eries BVMM General Description eries BVMM is a manifold mounted high pressure 414 Bar (6 PI) 2 or 3-way ball valve. Manifold mounting eliminates an external fluid
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More informationCombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines
More informationBall Valves. Full Ported Very low pressure drop. Polyamide Thrust Bearings Low actuation torque and high
Features and Advantages Introduction The Parker High Pressure all Valve Product Line serves in applications ranging from 3000 to 10,000 PI. Included in this section is the eries VAL, especially designed
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 55 Toggle link mechanism aintains secure and powerful support.
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationBall Valves. Plug Valves. 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented. 1/8" to 1/4" Pipe Size. Section B. Pneumatic
Ball Valves 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented Plug Valves 1/8" to 1/4" Pipe Size B Section B Ball Valve Basic Features...2 Ball Valve Part umbers & imensions... 3-4 Plug Valve Basic Features...5
More informationQuick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationDixon Sanitary 2008 Actuation Catalog
Dixon Sanitary 008 Actuation Catalog Distributed By: Table of Contents Miscellaneous... -5 Ordering Instructions... - Seat and Seat Materials... Available Options...5 Standards and Finishes...5 Check Valves...
More informationLIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY Bradford, a division of Dixon Valve and Coupling Company, (herein called "Bradford") warrants the products described herein, and manufactured by Bradford to be free from defects in material
More informationDurco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationMarwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
More informationTBV. TBV Cryogenic Ball Valves
TV ryogenic all Valves upplying the needs of the cryogenic market since 1978, TV continues to offer its customers new and improved products for cold service TV 2 TV T TT TV ryogenic all Valves verview...
More informationItem 513F. 3/4 Way High Pressure Ball Valve ASME600, 900 & 1500 SIZE: 1/2"-2"
Item 53F 3/ Way High Pressure Ball Valve ASME600, 900 & 0 : /"" ZIPSON'S 53F, 3600 psi, 3/ way high performance flanged ball valve was designed for the high pressure industrial pipe line. With T//X/Iport
More informationAFFILIATIONS PAGE 1 BUTTERFLY VALVES PAGE 2-9 CHECK VALVES PAGE BALL VALVES PAGE PVA VALVES PAGE COMPRESSION VALVE PAGE 42
TABLE OF CONTENTS AFFILIATIONS PAGE 1 BUTTERFLY VALVES PAGE 2-9 Specifications... 3 Pneumatically Operated technical application data and dimensions...4 Manual information and dimensional chart... 5 Manual
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationInstallation, Maintenance & Operating Instructions
-SS VVS nstallation, aintenance & Operating nstructions - SS VVS TO The ulflo -Series feature both direct acting and internal pilot operated models with either screw or flange type connections. The threaded
More information9400 Series. Top Entry Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
9400 Series Top Entry Valves STANDARDS eets ASE B16.5, B16.10, and B16.34, API 608, API 598, API 607 Rev. 5/ISO 10497 ASE Section 8 cover/body flange connection and bolting Wall thickness complies with
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 ourtesy of Steven ngineering, nc.-2 Ryan Way, South San rancisco,
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More informationFor Repair Parts, call
Dayton Operating nstructions and s Manual For Repair s, call 1-800-323-0620 -erial number (if any) - description and number as shown in parts list Figure 11 Repair s llustration for Pallet Truck 18 Dayton
More informationTOP-FLO TF4 Flow Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries TOP-FLO Full Flow Ball
More informationbrands you trust. CRANE - Cast Steel Valves Crane ChemPharma & Energy
brands you trust. CRANE - Cast Steel Valves Features & Benefits Key Features & Benefits All seat rings are seal welded as standard Quality process fully documented, materials fully traceable Full range
More informationType 695. , Sizes 1/2-2
escription The type 695 is a compact valve with many features which make it ideal for pharmaceutical and bioprocessing applications. Sanitary iaphragm Valve Pneumatically operated Standard Features, Compact
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More information2.26 S OLENOID VALVES S ERIES VQ1000
2.26 S OLENOID VALVES 5 PORT M ETAL S EAL/RUBBER S EAL U LTRA H IGH S PEED S OLENOID VALVE High Speed Response from new Solenoid Design. Long Life: Over 200 Million Cycles can be with Patent Pilot Valve
More informationManufacturer of precision helical gear pumps for a wide range of industrial applications
Manufacturer of precision helical gear pumps for a wide range of industrial applications Made in the U our series of versatile helical gear pumps for moving both low and high viscosity liquids PUMP U 2
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationSERIES 203FB SPECIFICATIONS. Internal Surface Finish. CV & Weight Chart
SERIES 203FB 3-Piece Body Hygienic Ball Valve Valve Sizes: I /2" to 4", Optional 6" 3 piece body allows end connection variations Quick acting I /4 turn operation with visual indications of the flow Unobstructed
More informationValve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
More informationKTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More informationNorgren Compact. Interchangeable Pneumatic Actuator. Section 9. Single Acting Compact. Double Acting Compact Interchangeable Pneumatic Actuator
Section 9 orgren Compact Interchangeable neumatic Actuator Single Acting Actuator...ACT-9-1 Double Acting Actuator...ACT-9-8 Single Acting Compact Interchangeable neumatic Actuator Double Acting Compact
More informationManifold Specifications
Series 00 Manifold Specifications Manifold Specifications Model Manifold type P(SUP)/R(EXH) Valve stations A port porting specifications Port size For internal pilot For external pilot Location Direction
More informationDimensions / Technical Data / Order Codes
Flow Control alves / / Throttle and Shut-Off alve (In-Line ssembly) ød2 Smax 8 9 0 1 2 G2 L2 1 in both directions S, T and S threaded connections anel mounting nuts available on request zinc/iron-plated
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationSwing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationVELAN COMPANY PROFILE
VL-GPV-27 VLN COMPNY PROFIL Velan is one of the world's leading manufacturers of industrial steel valves, supplying gate, globe, check, ball, butterfly and knife gate valves for critical applications in
More informationEvans Ball Valves. Evans. Process Cooling Water System
Ball Valves System PW Series Full Port Design 1/4-6 Range Integrated Valve Assemblies Spool anifolds up to 24 (7m) engths One-piece ANSI 150lb Flange Optional 100% Pressure Tested PW Series In today s
More informationYou get it All. Quality products are not enough. Standardized carton sizes. Large. The benchmark of packaging
Stainless Steel You get it ll. It s not just a quality product - it s a quality system Quality products are not enough. ecause if you want every product to be a quality product, you need a quality system.
More informationHIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationLKH Centrifugal Pump ) ) ( (
D 65328 10 2000-08 L entrifugal ump pplication he L pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance.
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationPRECISION Instrument Manifolds
he ew tandard PC nstrument anifolds irect ount anifolds PC s line of transmitter manifolds are designed to mate directly to all transmitters. dditionally, a complete line of remote mount manifolds is on
More informationG Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
More informationK-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.
More informationSV80H Safety and Relief Valves
age 1 of 18 I2 B ev.00 U S Safety and elief alves escription he S is a full nozzle safety and relief valve with orifices to, comply with the AI S 526, beyond others with super capacity. Suitable for gas,
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationSTEEL & O BRIEN MANUFACTURING
STEEL & O BRIEN MANUFACTURING VALVES, SIGHT GLASSES & SPRAY BALLS Don t See What You Need? We have more than 35,000 unique part numbers in our inventory. We ll be happy to help you find what you need or
More informationForged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
More informationNAVAL. Navaltrim stainless steel control valve
NAVAL Navaltrim stainless steel control valve CONSTRUCTION: NAVALTRIM CONTROL VALVE NAVALTRIM control valves are designed for control of liquid flows in heating, and cooling systems. They are also suitable
More informationYARWAY BLOW-OFF VALVES SEATLESS, HARDSEAT AND UNIT TANDEM
YRWY LOW-OFF VLVS STLSS, HRDST ND UNIT TNDM Designed for blow-off service in boiler systems with pressures of 36 psig. FTURS GNRL LICTION low-off service in boiler systems to remove dirt, sediment and
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationProduct Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationNAVAL Ball Valves NAVALTRIM. Control valve
NAVAL Ball Valves NAVALTRIM Control valve NAVALTRIM CONTROL VALVES NAVALTRIM control valves are designed for control of liquid flows in heating, cooling and air-conditioning systems. NAVALTRIM control
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More information