Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
|
|
- Clement Warren
- 6 years ago
- Views:
Transcription
1 Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev:
2 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View 1. Handwheel Nut: The handwheel nut secures the handwheel to the bonnet assembly. 2. Handwheel: The handwheel cycles the valve. 3. Stem Nut: The stem nut provides a precision guide for proper stem alignment.. 4. & 11. Gland olts & Nuts: The gland bolt and nut allows for easy adjustments for packing compression. 5. Stuffing ox: The stuffing box contains the packing. 6. onnet olts: The bonnet bolts secure the bonnet to the body. 7. Yoke & onnet: Newco bonnet assemblies are built to the same standards as the bodies. Larger size gate valves utilize a multi-piece bonnet design. 8. onnet Gasket: The bonnet gasket creates a leakproof seal between the bonnet and body. 9. ody: Newco forged steel bodies provide low resistance flow and optimum strength and performance. 10. Seat Rings: To ensure a stable shutoff, seat rings are aligned and swaged into the valve, then precision ground for optimal seating. 12. Gland Flange: pplies pressure to the gland for accurate packing adjustments. 13. Gland: ompresses the packing to create a stem seal above the back seat, between the bonnet and stem. 14. Packing: The packing creates a seal above the back seat, between the bonnet and stem. 15. Stem: The stem is precision machined and inserts into the horizontal channel in the disc. 16. Wedge: Newmans solid wedge is machined to the tightest tolerances to ensure trouble free shutoff and cycling
3 Forged Steel olted & Welded onnet Gates Threaded, Socket Weld & uttweld Ends onventional Port lass 800 thru 2500 s: 1/4 thru 3 Valve esign: PI 602 Pipe Threads, General Purpose, Inch: SME Socket Welding & Threaded: SME Tested in ccordance with: PI 598 Recoended Spare Parts* OLTE ONNET WELE ONNET lass 800 thru 2500 olted & Welded onnet Gates lass 800 W lass 800 Wt. Wt. 1/ / / / / / lass 1500 W lass 1500 Wt. Wt. 1/ / / / lass 2500 W lass 2500 Wt. Wt. 1/ / / / Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. imensions are subject to change without notice. Typical ill of Materials (See page 12 for available materials.) omponent Material STM Spec omponent Material STM Spec ody arbon Steel 105N Handwheel Nut arbon Steel oercial onnet arbon Steel 105N Nameplate luminum oercial * Packing Graphite W/raided arbon Fiber End Rings Handwheel arbon Steel 105N * Gasket Stainless Steel 316 Graphite Yoke Sleeve Stainless Steel ISI 416 Stem Stainless Steel Gland Nuts arbon Steel 194 2H Wedge Stainless Steel 13 hrome Gland Flange arbon Steel 105N Seat Rings Stainless Steel Gland Studs Stainless Steel ISI 410 onnet olt lloy Steel Packing Gland Stainless Steel
4 Forged Steel Extended ody Gates olted & Welded onnet onventional Port lass 800 thru 1500 s: 1/2 thru 2 Valve esign: PI 602 Pipe Threads, General Purpose, Inch: SME Socket Welding : SME Tested in ccordance with: PI 598 Recoended Spare Parts* vailable Ends Socket Weld OLTE ONNET WELE ONNET Integrally Reinforced ontoured End Integrally Reinforced Lip End Threaded lass 800 & 1500 Extended ody - olted & Welded onnet Gate lass 800 IR ontoured End lass 800 IR - Lip End lass 800 Threaded lass 800 Socket Weld Wt. Wt. Wt. Wt. 1/ / / lass 1500 Re-Out-Forced lass 1500 Re-In Forced lass 1500 Threaded lass 1500 Socket Weld Wt. Wt. Wt. Wt. 1/ / / Typical ill of Materials (See page 12 for available materials.) omponent Material STM Spec omponent Material STM Spec ody arbon Steel 105N Handwheel Nut arbon Steel oercial onnet arbon Steel 105N Nameplate luminum oercial * Packing Graphite W/raided arbon Fiber End Rings Handwheel arbon Steel 105N * Gasket Stainless Steel 316 Graphite Yoke Sleeve Stainless Steel ISI 416 Stem Stainless Steel Gland Nuts arbon Steel 194 2H Wedge Stainless Steel 13 hrome Gland Flange arbon Steel 105N Seat Rings Stainless Steel Gland Studs Stainless Steel ISI 410 onnet olt lloy Steel Packing Gland Stainless Steel Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. imensions are subject to change without notice. 16
5 Forged Steel Flanged End Gates olted & Welded onnet onventional Port lass 150 thru 1500 s: 1/2 thru 2 (1/4 & 3/8 available upon request) OLTE ONNET WELE ONNET Typical ill of Materials (See page 12 for available materials.) omponent Material STM Spec ody arbon Steel 105N onnet arbon Steel 105N * Packing Graphite W/raided arbon Fiber End Rings * Gasket Stainless Steel 316 Graphite Stem Stainless Steel Wedge Stainless Steel 13 hrome Seat Rings Stainless Steel onnet olt lloy Steel Handwheel Nut arbon Steel oercial Nameplate luminum oercial Handwheel arbon Steel 105N Yoke Sleeve Stainless Steel ISI 416 Gland Nuts arbon Steel 194 2H Gland Flange arbon Steel 105N Gland Studs Stainless Steel ISI 410 Packing Gland Stainless Steel Valve esign: PI 602 Flange imensions: SME 16.5 Face-to-Face imensions: SME Tested in ccordance with: PI 598 Recoended Spare Parts* lass 150 thru 1500 olted & Welded onnet Flanged Gates lass 150 & W Wt. 1/ / / / lass 300 & W Wt. 1/ / / / lass 600 & W Wt. 1/ / / / lass 1500 & W Wt. 1/ / / / Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes available on request. imensions are subject to change without notice. 17
6 Forged Steel High Pressure Welded onnet Gate onventional Port lass 4500 s: 1/2 thru 2 Valve esign: SME Pipe Threads, General Purpose, Inch: SME Socket Welding: SME Tested in ccordance with: PI 598 Recoended Spare Parts* lass 4500 Welded onnet Gate Wt. 1/ / / / Typical ill of Materials (See page 12 for available materials.) omponent Material STM Spec ody arbon Steel 105N onnet arbon Steel 105N * Packing Graphite W/raided arbon Fiber End Rings * Gasket Stainless Steel 316 Graphite Stem Stainless Steel Wedge Stainless Steel 13 hrome Seat Rings Stainless Steel onnet olt lloy Steel Handwheel Nut arbon Steel oercial Nameplate luminum oercial Handwheel arbon Steel 105N Yoke Sleeve Stainless Steel ISI 416 Gland Nuts arbon Steel 194 2H Gland Flange arbon Steel 105N Gland Studs Stainless Steel ISI 410 Packing Gland Stainless Steel Note: imensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes available on request. imensions are subject to change without notice. 18
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationStainless & Exotic Alloy Valves Product Line Technical Data
Stainless & Exotic lloy Valves Product Line Technical ata orporate Headquarters ooper Valves Stafford, Texas 13127 Trinity rive Stafford, TX 7777 Tel: 281.302.900 Fax: 281.302.801 www.oopervalves.com Manufacturer
More informationVanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
More informationAN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves
brands you trust. LOYCO Corrosion Resistant Stainless Steel s Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M (lloy 20) road pressure classes
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationbrands you trust. ALOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy
brands you trust. LOYCO Corrosion Resistant Stainless Steel Valves Crane ChemPharma & Energy Key Features and pplications Key Features and enefits Full material offering including CF8M, CF3M, and CN7M
More informationModel SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
More informationAloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
More informationFORGING AHEAD OF THE REST
Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance.
More informationG Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
More informationB1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
More informationTABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
More informationGate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
More informationMSC-125 and MSC-160 Manifolds for Steam Distribution and Condensate Collection.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More informationSempell Dewrance Parallel Slide Gate Valves High pressure Cast Steel
High pressure and temperature parallel slide gate valve. The eyelet follower (conduit) design provides long reliable service life and allows for high seat velocities without detriment to service life.
More informationFeatures and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationA single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
More informationGATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
More informationThe GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
More informationPRESSURE SEAL CATALOG
PRESSURE SEL TLOG www.walworth.com 2 www.walworth.com INEX INTROUTION ENGINEERING ONTROL... 5 QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 GTE, GLOE, GLOE Y PTTERN, TILTING IS HEK, SWING IS HEK N LIFT
More informationPRESSURE SEAL CATALOG
PRESSURE SEL TLOG For more detailed information, please visit our website: UNITE STTES TW The Valve ompany 13641 ublin ourt, Stafford, Texas 77477 Phone: (713) 996 9696 Toll free: (1 800) 697 1842 Fax:
More informationKTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationYARWAY BLOW-OFF VALVES SEATLESS, HARDSEAT AND UNIT TANDEM
YRWY LOW-OFF VLVS STLSS, HRDST ND UNIT TNDM Designed for blow-off service in boiler systems with pressures of 36 psig. FTURS GNRL LICTION low-off service in boiler systems to remove dirt, sediment and
More informationTable of Contents
040815 FULL Catalog Table of Contents COOPER Valves Company Information 1 Our History 1 The COOPER Mission Statement 1 Our Products 2 Typical Applications 2 COOPER Features and Benefits 2 Why consider
More informationCAST STEEL CATALOG.
ST STEEL TLOG www.walworthmx.com INEX Introduction WLWORTH Engineering ontrol...5 WLWORTH Quality System...5 Quality ontrol Equipment...9 ast Steel Gate, Globe and Swing heck Valves ST STEEL OLTE ONNET
More informationAN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
More informationFLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
More informationProduct Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
More information9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More informationASME Classes /2 24 ( mm) Class /2 1 1 /2 (15 40 mm)
ASME Classes 150 300 1 /2 24 (15 600 mm) Class 800 1 /2 1 1 /2 (15 40 mm) PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check,
More informationManufacturing Standards
HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have
More informationDEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More informationTilting Disc Check Valve
Figures 123 123½ Tilting heck Valve lass 150 olted ap Figure 123 Figure 123½ utt Weld 2 through 36 inches (50-900 mm) STM 216 Grade W 285 psi @ -20 F to 100 F (20 bar @ -28 to 37 ) of onstruction* Inlet
More informationDesigned for blow-off service in boiler systems with pressures of 3,206 psig.
Designed for blow-off service in boiler systems with pressures of 3,6 psig. General Description asic requirements for the design and use of blow-off valves are established by the SM Power oiler Code, Section
More informationGate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationCAST STEEL VALVE CATALOG. VÁLVULAS UNIVAL DE MÉXICO
ST STL VLV TLOG www.unival.com.mx VÁLVULS UNIVL MÉXIO INX UNIVL HISTORY...4 MISSION...4 VISION...4 QULITY POLIY...4 STNR PROUT LIN... valves comparision table Y FIGUR NUMR...6 PROUT O (HOW TO ORR)...7
More informationCAST STEEL PLUG VALVE CATALOG
ST STL PLUG VLV TLOG www.walworth.com INX INTROUTION NGINRING ONTROL... 5 QULITY SYSTM... 5 QULITY ONTROL QUIPMNT... 9 OMPNSTOR, TOP NTRY, N GS SRVI STL PLUG VLVS WLWORTH LURIT PLUG VLVS, VNTGS N PTTRNS...11
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationCompact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationDurco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationNewco / OIC / Cooper Forged Valves. Operation & Maintenance. Manual
NEWCO / OIC / COOPER VALVES Newmans Inc., Newmans Valve Ltd. Operation & Maintenance Manual Revision 2, 9 May 2007 1. Introduction and Safety Information... 1 1.1. Introduction... 1 1.2. Safety Information...
More informationDesign A61D TriAx Triple Offset High Performance Butterfly Valve
pril 2000 ulletin 51.6:61D Trix Design 61D Trix Triple Offset High Performance utterfly Valve Description The Design 61D Trix is a triple offset disk HPV designed for rugged isolation service, available
More informationSeries Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
More informationDRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
More information1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationWKM Valves Triple Offset Valves
WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets ontents Triple offset geometry.......................................... 3 Major markets...................................................
More informationKF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationGasket
CAST STAINLESS STEEL GATE VALVES API 603 INTEGRAL SEAT, 1 2 1 1 2", (15 40 mm) CLASS 800 GATE VALVES FULL PORT 1 2 1 1 2", (15 40 mm) THREAE OR SOCKET WEL, ASME CLASS 800 Precision High Quality Investment
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationarflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
More informationDRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSoft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16
SLES SERVICE +8 (0)7 6 info@econosto.fi TYPE 000 DN0-0 TYPE 000 DN0-00 Soft sealing gate valves Nominal diameter options (DN) 0-00 Nominal pressure options (PN) 6 TYPE 000/BV-0-7 Soft sealing gate valve
More informationDistributed by: M&M Control Service, Inc brands you trust.
Distributed by: M&M Control Service, Inc. /stockham.php 800-876-0036 847-356-0566 brands you trust. STOCKHAM - Cast Valves Contents Performance in Any Application...4 How to Specify and Order Valves...4
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationBronze Valves. Gate Valves Globe Valves Check Valves
ronze Valves Gate Valves Globe Valves heck Valves ronze Valves Index ross Reference... 2 General Data... 3 Materials... 4 Ratings... 5 Pressure/Temperature Ratings and Flow Data... 6 ronze Valve Selection
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationCAST STEEL VALVES. 150# 300# 600# Gate Globe Check. 4Evergreen Valve
CST STEE VVES 150# 300# 600# Gate Globe Check 4Evergreen Valve 4E is a Texas corporation valve company which was founded in 1993 by a group of enthusiastic people with more than years of serving in the
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationS-17 CATALOG. Forged Steel Strainers
S-17 CTLOG Forged Steel s Vogt Valves History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
More informationAmphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
More informationHV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationUREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
More informationSeries Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
More informationType K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES. Pressure Seal - Bolted Bonnet Cryogenic.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES Pressure Seal - Bolted Bonnet Cryogenic. 1 Design 2 Outside 3 Face 4 Non 5 Suggested 6 Dimension 7 Special
More informationProject Valves Technical Data
Project Valves Technical ata Project Valves Technical ata ontents Introduction 1 ominator Z3000 2-4 alancing Valves 5-15 Gate Valves 16-34 Globe Valves 35-40 heck Valves 41-47 all Valves 48-58 utterfly
More informationNorth. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve
North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5
More informationValve installation orientations
By: Greg Johnson, June, 2016 1 Valve installation orientations Valve installation orientations Flow horizontal stem vertical Stem vertical - optimum Flow horizontal stem vertical An assist from gravity
More informationIOM Manual. IOM Manual. Series 76/77.
IOM Manual IOM Manual Series 76/77 www.flowlinevalves.com Flow Line Valve and Controls, L.L.C. 110 Main Project Road Schriever, LA 70395 P.O. Box 677 Schriever, LA 70395 Phone 985-414-6004 * Toll Free
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationYSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationGate Valves Globe Valves Check Valves. The Valve Experts IRON VALVES
Gate Valves Globe Valves Check Valves The Valve Experts IRON VLVES Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section...
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More informationCheck Valves High Pressure Steel
heck Valves High Pressure Steel DEWRANE Features & Benefits Excellent Reliability - Direct deposited seats hard-faced with Stellite or Equivalent - Tilting Disc design balanced for quick opening and immediate
More information