K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS

Transcription

1 A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections. 3/4/5-way multi-port designs available. ISO 5211 top mounting plate available, for easy actuation, on selected models. Body construction either investment or sand cast according to model. Carbon steel or stainless steel body materials. Wide range of pressure ratings available. Reduced and full bore models. Locking device on all models. Seat material options available. Fire tested valves available. APPLICAION he range includes valves ideal for general industrial and service applications including water, oil, gas and chemical processes. Certain models also offer designs suitable for more hazardous services such as fuel and inflammable substances. ECHNICAL DAA Sizes: DN 8 - NPS ¼ - 12 Pressure ratings: PN 10/16/25/40/63 ASME 1/ JISK 10K/20K End connections Screwed: BSPP, BSP, NP Welded: Socket and butt weld Flanged: ASME 1/ PN 10/16/25/40 JISK 10K/20K Emerson.com/FinalControl 2017 Emerson. All Rights Reserved. VCDS EN 17/11

2 R110/R112 - ONE-PIECE BODY BALL VALVE See page 4 An economical, investment cast, one-piece body ball valve in stainless steel Size range DN 8 (NPS ¼) to DN (NPS 2) - Reduced bore F120 - WO-PIECE BODY BALL VALVE See page 5 General purpose, 69 bar (0 psi) (PN 63) ball valve, in stainless steel Size range DN 8 (NPS ¼) to DN (NPS 2) - Full bore F130M - HREE-WAY SPLI BODY BALL VALVE See page 6 and 7 With ISO 5211 top mounting plate and fully enclosed bolting Flanged ASME 1 or DIN PN 10/16 or JIS 10K L-, - or LL-port options, 90 operation Carbon steel or stainless steel bodies Size range DN (NPS 2) to DN 1 (NPS 6) - Full bore DN (NPS 8) - Reduced bore F133M - HREE AND FOUR-WAY SPLI BODY BALL VALVE See page 8-10 With ISO 5211 top mounting plate and fully enclosed bolting End connections screwed, socket weld, butt weld or flanged Flanged ASME 1 or DIN PN 10/16 or JIS 10K L-, - or LL-port options, 90 operation Carbon steel or stainless steel bodies Size range DN 10 (NPS ⅜) to DN (NPS 2) - Full and reduced bore R138 - HREE WAY MULI-POR BALL VALVE See page 11 With ISO 5211 top mounting plate Investment stainless steel cast body Screwed ends, NP, BSPP, BSP reduced bore L- or -port options, 90 operation Size range DN 8 (NPS ¼) to DN (NPS 2) - Reduced bore 2

3 F155 - HREE-PIECE ECONOMICAL BALL VALVE See page 12 and 13 hree piece, swing-out design End connections screwed, butt weld or socket weld Carbon steel or stainless steel bodies Size range DN 8 (NPS ¼) to DN (NPS 4) - Full bore F171 - HREE-PIECE BALL VALVE O ISO 5211 See page 14 and 15 With ISO 5211 top mounting plate End connections flanged, screwed, butt weld or socket weld Carbon steel or stainless steel bodies Size range DN 8 (NPS ¼) to DN (NPS 4) - Full bore F171 - HREE-PIECE HIGH PURIY CLEAN BALL VALVE See page 16 and 17 With ISO 5211 mounting plate End connections butt weld, tubing and ri-clamp High purity cleaning (oil free) Helium leak detection calibrated to 1 x 10-5 std cm 3 /sec Size range DN 15 (NPS ½) to DN (NPS 12) - Full bore/true bore F180/R180/F180F/R180F - HREE-PIECE HEAVY DUY BALL VALVE See page With ISO 5211 top mounting plate and fully enclosed bolting End connections screwed, butt weld or socket weld Carbon steel or stainless steel bodies F180F Fire safe tested to API th edition / ISO 10497:4 Size range F180 - DN 8 (NPS ¼) to DN (NPS 4) F180F - DN 8 (NPS ¼) to DN 80 (NPS 3) - Full bore and reduced bore F190/F190F - SPLI BODY FLANGED BALL VALVE See page With ISO 5211 top mounting pad Flanged ASME 1, or DIN PN 10/16, 25/40 or JIS 10K, 20K Investment casting for DN (NPS 4) and under, carbon steel or stainless steel bodies F190F Fire safe tested to API th edition / ISO 10497:4 Size range DN 15 (NPS ½) to DN (NPS 12) - Full bore 3

4 R110/R112 - ONE-PIECE BODY BALL VALVE MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / Insert ASM A351 Gr CF8M 1 3 Ball ASM A351 Gr CF8M 1 4 Seat PFE 2 5 Anti-static shaft A276 ype Handle 304SS 1 7 Shaft packing PFE 1 8 hrust washer PFE 1 9 Gland ring 304SS 1 10 Handle sleeve Vinyl 1 11 Handle washer 304SS 1 12 Shaft nut 304SS 1 13 Locking device 304SS 1 DIMENSIONS (mm) NPS DN Ød M H L B1 B2 S Wt (kg) ¼ ⅜ ½ ¾ ¼ ½ FEAURES General purpose 69 bar (0 psi) (PN 63) ball valve Investment cast, one-piece body Stainless steel construction only Screwed ends to: - BSPP - BSP - NP Blow-out proof shaft Locking device Size range DN 8 (NPS ¼) to DN (NPS 2) - Reduced bore NOE For Pressure/emperature charts, please refer to page 31 4

5 F120 - WO-PIECE BODY BALL VALVE B Ød MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / Ball ASM A351 Gr. CF8M 1 3 Seat PFE 2 4 Body seal PFE 1 5 Cap CF8M / Anti-static shaft A276 ype hrust washer PFE 1 8 Shaft packing PFE 1 9 Gland nut 304SS 1 10 Shaft washer 304SS 1 11 Shaft nut 304SS 1 12 Handle 304SS 1 13 Handle sleeve Vinyl 1 14 Locking device 304SS 1 DIMENSIONS (mm) NPS DN Ød M H L B Wt (kg) ¼ ⅜ ½ ¾ ¼ ½ FEAURES General purpose 69 bar (0 psi) (PN 63), ball valve wo piece, investment cast body Stainless steel construction only Screwed end to: - BSPP - BSP - NP DIN 3202 M3 face-to-face Adjustable shaft packing Locking device Size range DN 8 (NPS ¼) to DN (NPS 2) - Full bore NOE For Pressure/emperature charts, please refer to page 31 5

6 F130M - HREE-WAY SPLI BODY BALL VALVE DN - (NPS 2-4) DN 1 (NPS 6) MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Cap CF8M / WCB, / Ball ASM A351 Gr. CF8M 1 4 Ball seat RPFE 4 5 Body gasket PFE 4 6 Bolt nut A2-70 (Note 1) 7 Bolt B8/A2-70/8.8 (Note 1) 8 Bushing % SS powder / % PFE 1 9 Anti-static shaft A276 ype 316 (Note 3) 1 10 Lower thrust washer % SS powder / % PFE 1 11 Compress ring 316L SS DN - (NPS 2-4) 1 316SS DN 1 - (NPS 6-8) 12 Upper thrust washer FM Cover CF8M / WCB, / V-ring shaft packing PFE 1 set 15 hrust washer % SS powder / % PFE 1 16 Gland 304SS 1 17 Stop bolt Stainless steel Cover seal PFE 1 19 Belleville washer 301SS 2 20 riangle stopper Stainless steel 1 21 Lock saddle Stainless steel 1 22 Shaft nut 304SS Shaft adapter 304SS 1 24 Handle SGP Zn plating 1 25 Block cover ASM A351 Gr. CF8M / ASM A216 Gr. WCB 1 (Note 2) Note 1: DN - 80 (NPS 2-3), all standards: 20 pcs; DN (NPS 4), all standards: 28 pcs, (B8); DN 1 (NPS 6) Class 1, PN 10/16,10K, all standards: 44 pcs, (SS: A2-70/CS: 8.8) Note 2: For no. 25 block cover, please refer to page 7 Note 3: 2205 (A276-S31803) is standard for DN 1 (NPS 6) Class 1, 10K, PN 10/16 CF8M/SCS14A/ ball valves 17-4 (A ) is standard for DN 1 (NPS 6) Class 1, 10K, PN 10/16 WCB/SCPH2/ ball valves FEAURES Four seats design Simplicity in replacing valve seats and packing Investment cast body DN (NPS 2) to DN (NPS 4) Sand casting DN 1 (NPS 6) and DN (NPS 8) reduced bore Standard L-port and -port; optional LL-port for 4 way (*) ightness to EN , Rate A Patented SEALMASER shaft arrangement Double shaft sealing complies with A Luft requirements Semi-trunnion mounted Lower operation torque ISO 5211 mounting plate Full bore and flanged connection Anti-static design according to EN 1983 / ISO Optional ball and body patterns for various flow paths Valve pressure rating: - ASME Class 1 - DIN PN 10/16 - JIS 10K NOE For Pressure/emperature charts, please refer to page 31 BALL POR CONFIGURAION op view Side view Side entry: 1. ee-port () 2. Angle port (L) 3. Double angle port (LL)* 4. Straight port (S) * Please consult factory for minimum order quantity 6

7 F130M - HREE-WAY SPLI BODY BALL VALVE DIMENSIONS (mm) NPS DN A B Ø F G W M8 2½ M M M M12 8* M12 ØB ØC ØD ASME JIS PN ASME JIS PN ASME JIS PN ASME JIS PN NPS DN Ød 1 10K 10/ K 10/ K 10/ K 10/ ½ * f N ØN L ASME JIS ASME JIS PN ASME JIS PN ASME JIS PN NPS DN 1 10K 1 10K 10/ K 10/ K 10/16 H H1 M ½ * * Reduced bore only. 7

8 F133M - HREE- AND FOUR-WAY SPLI BODY BALL VALVE FEAURES Handle for valve Size DN 40 (NPS 1½) MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Cap CF8M / WCB, / Ball ASM A351 Gr. CF8M 1 4 Ball seat RPFE 4 5 Body gasket PFE 4 6 Bolt washer 304SS 16 7 Bolt A Lower thrust washer % SS powder / % PFE 1 9 Compress ring 316L SS 1 10 Upper thrust washer FM V-ring shaft packing PFE 1 set 12 hrust washer % SS powder / % PFE 1 13 Anti-static shaft A276 ype Gland 304SS 1 15 Belleville washer 301SS 2 16 Shaft nut 304SS Handle CF8 DN (NPS ½ - 1¼) 1 SGP Zn plating DN 40 (NPS 1½) 18 Handle sleeve Vinyl 1 19 Rivet 304SS 1 20 Shaft adapter 304SS 1 21 riangle stopper Stainless steel 1 22 Lock saddle Stainless steel 1 23 Locking trigger Stainless steel 1 24 Stop bolt Stainless steel 1 25 Block cover CF8M / WCB, / Four seats design Simplicity in replacing valve seats and packing Investment casting for body and end cap Optional LL-port for 4 way (*) Patented SEALMASER shaft arrangement Double shaft sealing complies with A Luft requirements Blow-out proof shaft ISO 5211 mounting plate Anti-static design according to EN 1983 / ISO Optional ball and body patterns for various flow paths Weld in place for socket or butt weld end Size range DN 10 (NPS ⅜) to DN (NPS 2) - Full and reduced bore Valve pressure rating: - ASME Class 1 - DIN PN 10/16 - JIS 10K End connections screwed, butt weld, socket weld and flanged Flanged connection in full bore only ightness to EN , Rate A Patented POSILOCK handle for DN 15 (NPS ½) to DN 32 (NPS 1¼) - Full bore DN 10 (NPS ⅜) to DN 32 (NPS 1¼) for standard handle DN 40 (NPS 1½) -handle BALL POR CONFIGURAION Side entry 3-way A Side entry 4-way B op view Side entry 1. ee-port () 2. Angle port (L) 3. Double angle port (LL)* 4. Straight port (S) op view Side view * Please consult factory for minimum order quantity Side view 8

9 F133M - HREE- AND FOUR-WAY SPLI BODY BALL VALVE Full bore DN 40 (NPS 1½) Reduced bore DN (NPS 2) NOE For Pressure/emperature charts, please refer to page 31 DIMENSIONS (mm) NPS DN F R F R Ød H L M A B G ØP ØF W ⅜ ½ M5 ½ ¾ M5 ¾ M6 1 1¼ M6 1¼ 1½ M8 1½ M8 F: Full bore R: Reduced bore 9

10 F133M - HREE- AND FOUR-WAY SPLI BODY BALL VALVE Size DN 40 (NPS 1½) L/2 NOE For Pressure/emperature charts, please refer to page 31 DIMENSIONS (mm) ØB ØC ØD ASME JIS 10K PN ASME JIS 10K PN ASME JIS 10K PN NPS DN A B 1 JIS 20K 10 1 JIS 20K 10 Ød ØP 1 JIS 20K 10 N M W ½ M5 ¾ M M6 1½ M8 L f Øn ASME 1 PN ASME JIS JIS PN ASME JIS 10K PN ASME JIS 10K PN NPS DN F G H1 JIS 10K JIS 20K K 20K 10 1 JIS 20K 10 1 JIS 20K 10 ½ ¾ ½

11 R138 - HREE-WAY MULI-POR BALL VALVE Port MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / Cap CF8M / Seat RPFE 4 4 Ball ASM A351 Gr. CF8M 1 5 Anti-static shaft A276 ype Joint gasket PFE 2 7 hrust washer PFE 1 8 Gland 304SS 1 9 Handle 304SS 1 10 Handle washer 304SS Washer 304SS 1 12 Handle nut 304SS 1 13 Handle sleeve Vinyl 1 14 End cap CF8M / Shaft packings PFE 1 set 16 End cap seal PFE 1 17 Stopper 304SS 1 18 Bolt A Locking device 304SS 1 FEAURES General purpose 69 bar (0 psi) (PN 63), ball valve hree way multi-port ball valve with L-port or -port options, 90 operation Investment cast body Stainless steel body, RPFE seats Screwed ends to: - BSPP - BSP - NP ISO 5211 top mounting plate Blow-out proof shaft Size range DN 8 (NPS ¼) to DN 80 (NPS 3) - Reduced bore NOE For Pressure/emperature charts, please refer to page DEAIL K BALL POR CONFIGURAION DIMENSIONS (mm) NPS DN Port E F ØP N Ød±0.5 L±0.8 H±3.0 M±3.0 Wt (kg) ¼ M ⅜ M ½ M ¾ M M ¼ M ½ M M ½ M M op view Side view Side entry 1. ee-port () 2. Angle port (L) 11

12 F155 - HREE-PIECE ECONOMICAL BALL VALVE Ød MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Seat PFE 2 3 Body gasket PFE 2 4 Ball ASM A351 Gr. CF8M 1 5 Bolt nut 304SS Bolt washer 304SS Bolt 304SS Cap CF8M / WCB, / * 9 Anti-static shaft A276 ype Handle washer 304SS 1 11 Shaft packing PFE 1 12 hrust washer PFE 1 13 Gland nut 304SS 1 14 Shaft nut 304SS 1 15 Handle 304SS 1 set 16 Handle sleeve Vinyl 1 17 Locking device 304SS 1 FEAURES General purpose 69 bar (0 psi) (PN 63) / bar ( psi) (PN 40), ball valve hree piece, swing out design Investment casting for body and end cap End connections screwed, butt weld and socket weld Blow-out proof stem Locking device Size range DN 8 (NPS ¼) to DN (NPS 4) - Full bore ightness to EN , Rate A hreaded ends to: BSPP, BSP, NP NOE For Pressure/emperature charts, please refer to page 32 * Stainless steel welded connectors are CF3M/ ØN1 ØN2 ØN3 ØM3 L L L1 hreaded end Socket weld end Butt weld end 12

13 F155 - HREE-PIECE ECONOMICAL BALL VALVE L M Ød H L BW 37.5Ø ØN2 L SW DN 8-1/4"~3" 80 / NPS ¼ - 3 ØN3 ØM3 4" DN / NPS 4 DIMENSIONS (mm) DN NPS d1 L M H N2 N3 M3 Wt (kg) 8 ¼ ⅜ ½ ¾ ¼ ½ ½ PAR LIS NO. Part name Material 1 Body CF8M/WCB, / Body seat PFE 3 Body gasket PFE 4 Ball ASM A351 Gr.CF8M 5 Bolt nut SS304 6 Bolt washer SS304 7 Bolt SS304 8 Cap CF8M/WCB, / Anti-static stem A276 type Handle washer SS Stem packing PFE 12 hrust washer PFE 13 Gland nut SS Stem nut SS Handle SS Handle sleeve Vinyl 17 Locking device SS304 DIMENSIONS (inch) NPS DN d1 L M H N2 N3 M3 Wt (lbs) 8 ¼ ⅜ ½ ¾ ¼ ½ ½

14 F171 - HREE-PIECE BALL VALVE O ISO Handle for valve Sizes DN 65 - (NPS 2½ - 4) 5 2 Sizes up to DN (NPS 4) MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Cap CF8M / WCB, / * 3 Ball ASM A351 Gr. CF8M 1 4 Bolt A Bolt washer 304SS Body gasket PFE 2 7 Ball seat PFE 2 8 Anti-static shaft A276 ype V-ring shaft packing PFE 1 set 10 hrust washer % SS powder / % PFE 1 11 Gland 304SS 1 12 Belleville washer 301SS 2 13 Locking trigger Stainless steel 1 14 Lower shaft seal % SS powder / % PFE 1 15 Compress ring 316L SS 1 16 Upper shaft seal FM Stop bolt Stainless steel 1 18 Lock saddle Stainless steel 1 19 Shaft nut 304SS Handle CF8 / SGP Zn plating 1 21 Handle sleeve Vinyl 1 22 Rivet 304SS 1 23 Bolt nut A riangle stopper Stainless steel 1 25 Handle adapter CF8 1 FEAURES Patented SEALMASER shaft arrangement for DN 15 (NPS ½) (full bore) and larger sizes Double shaft seal design complies with A Luft fugitive emission requirements hree-piece swing out design Valve pressure rating: DN 8-40 (NPS ¼ - 1½) - ASME Class DN - (NPS 2-4) - ASME Class ISO 5211 top mounting plate End connections flanged, screwed, butt weld or socket weld Carbon steel or stainless steel bodies Size range DN 8 (NPS ¼) to DN (NPS 4) - Full bore Seat material options Blow-out proof shaft and anti-static design ightness to EN , Rate A Patented POSILOCK handle for DN 15 (NPS ½) to DN (NPS 2) - Full bore NOE For Pressure/emperature charts, please refer to page 33 * Stainless steel welded connectors are CF3M/

15 F171 - HREE-PIECE BALL VALVE O ISO 5211 d C B D N n f hreaded end Socket weld Butt weld Flange end (PN 25/40 F1) DIMENSIONS (mm) Wt (kg) hreaded NPS DN A B G ØP F W SW, BW ¼ M ⅜ M ½ M ¾ M M ¼ M ½ M M ½ M M M Wt (kg) PN 25/40 NPS DN Ød M H1 L4 L1 L2 N t1 f Øn ØD ØB ØC ØN2 ØN3 Flange ¼ ⅜ ½ ¾ ¼ ½ ½ ØN1 refer to thread options: BSPP, BSP, NP, DIN

16 F171 - HREE-PIECE HIGH PURIY CLEAN BALL VALVE a Sizes DN (NPS ½ - 3) Sizes DN - (NPS 4-12) MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, Cap CF8M / WCB, Ball ASM A351 Gr. CF8M 1 4 Ball seat PFE 2 5 Body seal PFE 2 5a Seat ring ASM A351 Gr. CF8M - DN (NPS 5-12) 1 6 Bolt washer 304SS Bolt nut A Bolt A2-70 (Note 1) 9 Lower thrust washer % SS powder / % PFE 1 10 Compress ring 316L SS - DN 15 - (NPS ½ - 4) SS - DN (NPS 5-12) 11 Upper thrust washer FM Anti-static shaft A276 ype 316 (Note 2) 1 13 V-ring shaft packing PFE 1 set 14 hrust washer % SS powder / % PFE 1 15 Gland 304SS 1 16 Belleville washer 301SS 2 17 Stop bolt Stainless steel Lock saddle Stainless steel 1 19 Shaft nut 304SS Locking trigger Stainless steel 1 21 Handle CF8 / SGP Zn plating 1 22 Handle sleeve Vinyl 1 23 Cap seal PFE 1 24 riangle stopper Stainless steel - DN 65 - (NPS 2½ - 12) 1 25 Handle adapter CF8 - DN (NPS 2½ - 5) A536 DN 1 - (NPS 6-12) 1 Note 1: DN (NPS ½ - 2½) x 4 pcs, DN 80 - (NPS 3-4) x 6 pcs, DN 125 (NPS 5) x 20 pcs, DN 1 (NPS 6) x 28 pcs, DN (NPS 8) x 24 pcs, DN 2 - (NPS 10-12) x 40 pcs Note 2: see table below FEAURES Patented SEALMASER shaft arrangement Double shaft seal design complies with A Luft fugitive emission requirements Blow-out proof shaft ISO 5211 top mounting plate hree-piece swing out design Valve pressure rating: DN (NPS ½ - 1½) - PN 63 DN - (NPS 2-4) - PN 40 DN (NPS 5-12) - PN 16 End connections butt weld, tubing and ri-clamp All wetted parts are polished to 180 Grit (0.51 to 0.64 micron) All extended weld ends in CF3M/DIN material allows orbital welding in place High purity cleaning (oil free) and packing Bosses for purge connections are built into the end caps Size range DN 15 (NPS ½) to DN (NPS 12) Helium leak detection calibrated to 1x10-5 std cm 3 /sec Patented POSILOCK handle for DN 15 (NPS ½) to DN (NPS 2) full bore Individually bagged Cavity filler seat option available Clean room asembly option available NOE For Pressure/emperature charts, please refer to page 33 Body material Size CF8M, SCS14A, NPS ½ NPS (A276-S31803) NPS (A276-S31803) WCB, SCPH2, NPS ½ NPS (A ) NPS (A ) 16

17 F171 - HREE-PIECE HIGH PURIY CLEAN BALL VALVE DN 15 - (NPS ½ - 4) Extended butt weld DN (NPS ½ - 3) SCH#5 / SCH#10 Extended butt weld DN - (NPS 4-12) SCH#5 / SCH#10 DN (NPS 5-8) L5 L5 L4 L4 -clamp Orbital tubing DIMENSIONS (mm) Wt (kg) NPS DN V L1 L2 L4 L5 ØK ØN *Ød *Ød1 *ØD -clamp ½ ¾ ½ ½ DN 2 - (NPS 10-12) Wt (kg) NPS DN A B G ØP W F Ød 5S 10S ØD M H1 L3 Ext. BW X Y ½ M ¾ M M ¼ M ½ M M ½ M M M M M M M M

18 F180/R180 - HREE-PIECE HEAVY DUY BALL VALVE Sizes DN 8-40 (NPS ¼ - 1½) Drawing shows full bore construction Sizes DN - 80 (NPS 2-3 ) MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Cap CF8M / WCB, / * 3 Ball ASM A351 Gr. CF8M 1 4 Bolt A Bolt washer 304SS Ball seat RPFE 2 7 Body gasket PFE 2 8 Anti-static shaft A276 ype V-ring shaft packing PFE 1 set 10 hrust washer % SS powder / % PFE 1 11 Gland 304SS 1 12 Belleville washer 301SS 2 13 Locking trigger Stainless steel 1 14 Lower shaft seal % SS powder / % PFE 1 15 Compress ring 316L SS 1 16 Upper shaft seal FM Stop bolt Stainless steel 1 18 Lock saddle Stainless steel 1 19 Shaft nut 304SS 2 20 Handle CF8 / SGP Zn plating 1 21 Handle sleeve Vinyl 1 22 Rivet 304SS 1 23 Bolt nut A * Stainless steel welded connector materials are CF3M/ FEAURES Patented SEALMASER shaft arrangement DN 15 (NPS ½) (full bore) and larger sizes Double shaft sealing complies with A Luft fugitive emission requirements Heavy duty, three piece ball valve ISO 5211 top mounting plate Fully enclosed bolting for sizes up to DN 40 (NPS 1½) full bore and DN (NPS 2) reduced bore End connections, screwed, butt weld and socket weld Seat material options Size range DN 8 to 80 (NPS ¼ - 3) - Reduced bore to DN (NPS 4) Blow-out proof shaft and anti-static design ightness to EN , Rate A Optional casting per AD0-WO Patented POSILOCK handle for DN 15 to (NPS ½ - 2) - Full bore Valve pressure rating: DN 8 - (NPS ¼ - 2) - ASME Class DN (NPS 2½ - 3) - ASME Class NOE For Pressure/emperature charts, please refer to page 33 18

19 F180/R180 - HREE-PIECE HEAVY DUY BALL VALVE H1 L4 Side view Full bore: DN 10 (NPS ⅜) Reduced bore: DN 15 (NPS ½) Side view Full bore: DN (NPS ½ - 1½) Reduced bore: DN 20 - (NPS ¾ - 2) Side view Full bore: DN - 80 (NPS 2-3) Reduced bore: DN 65 - (NPS 2½ - 4) hreaded end Socket weld Butt weld SCH#5 (FP) / SCH#10 (FP) FULL BORE DIMENSIONS (mm) t2 NPS DN Ød A B G ØP F W M t1 5S 10S L1 L2 L3 ØN2 ØN3 ØN4 H1 Wt (kg) ¼ M ⅜ M ½ M ¾ M M ¼ M ½ M M ½ M M ØN1: refer to thread options: NP, BSP, BSPP, DIN 2999 REDUCED BORE DIMENSIONS (mm) NPS DN Ød A B G ØP F W M t1 L1 L4 ØN2 ØN3 H1 Wt (kg) ½ M ¾ M M ¼ M ½ M M ½ M M M ØN1: refer to thread options: NP, BSP, BSPP, DIN

20 F180F/R180F - HREE-PIECE BALL VALVE - FIRE SAFE Seat Metal to metal Before fire After fire DEAIL A MAERIALS OF CONSRUCION No. Part name Material Quantity 1 Body CF8M / WCB, / Cap CF8M / WCB, / * 3 Ball A Bolt A Ball seat RPFE 2 6 Body gasket Graphite 2 7 Anti-static shaft A276 ype Shaft packing Graphite 1 set 9 hrust washer % SS powder / % PFE 1 10 Gland 304SS 1 11 Belleville washer 301SS 2 12 Locking trigger Stainless steel 1 13 Lower shaft seal % SS powder / % PFE 1 14 Compress ring 316L SS 1 15 Upper shaft seal Graphite 1 16 Stop bolt Stainless steel 1 17 Lock saddle Stainless steel 1 18 Shaft nut 304SS 2 19 Handle CF Handle sleeve Vinyl 1 21 Rivet 304SS 1 * Stainless steel welded connectors are CF 3M/ FEAURES Patented SEALMASER shaft arrangement for DN 15 (NPS ½) (full bore) and larger sizes Double shaft seal design Blow-out proof shaft ISO 5211 mounting plate Anti-static design Valve pressure rating: DN 8 - (NPS ¼ - 2) - ASME Class DN (NPS 2½ - 3) - ASME Class End connections, screwed, butt weld and socket weld Secondary metal to metal seating surface Fire tested to API th edition / ISO 10497:4 Size range DN 8-80 (NPS ¼ - 3) - Reduced bore to DN (NPS 4) ightness to EN , Rate A Optional casting per AD-W0 Patented POSILOCK handle for DN 15 - (NPS ½ - 2) - Full bore NOE For Pressure/emperature charts, please refer to page 33 20

21 F180F/R180F - HREE-PIECE BALL VALVE - FIRE SAFE hreaded end Socket weld Butt weld Side view Full bore: DN 10 (NPS ⅜) Reduced bore: DN 15 (NPS ½) Side view Full bore: DN (NPS ½ - 1½) Reduced bore: DN 20 - (NPS ¾ - 2) Side view Full bore: DN - 80 (NPS 2-3) Reduced bore: DN (NPS 2½ - 3) FULL BORE DIMENSIONS (mm) NPS DN Ød A B G ØP ØF W H1 L1 L4 M ØN2 ØN3 t Wt (kg) ¼ M ⅜ M ½ M ¾ M M ¼ M ½ M M ½ M M ØN1: refer to thread options: NP, BSP, BSPP, DIN 2999 REDUCED BORE DIMENSIONS (mm) NPS DN Ød A B G ØP F W H1 L1 L4 M ØN2 ØN3 t ½ M ¾ M M ¼ M ½ M M ½ M M M ØN1: refer to thread options: NP, BSP, BSPP, DIN

22 F190 - SPLI BODY FLANGED BALL VALVE a Handle for valve Sizes DN 65 - (NPS 2½ - 12) MAERIALS OF CONSRUCION No. Part name Material Quantity 1* Body ASM A351 Gr. CF8M / ASM A216 Gr. WCB 1 2* Cap ASM A351 Gr. CF8M / ASM A216 Gr. WCB 1 3 Ball ASM A351 Gr. CF8M 1 4 Anti-static shaft A276 ype 316 (Note 1) 1 5 Ball seat PFE 2 6 Body seal PFE 1 7 Stud A193 Gr. B8 / A193 Gr. B a Nut A194 Gr. 8 / A194 Gr. 2H Lower shaft seal % SS powder / % PFE 1 9 Compress ring 316L SS DN 15 - (NPS ½ - 4) / SS DN (NPS 5-12) 10 Upper shaft seal FM V-ring shaft packing PFE 1 set 12 hrust washer % SS powder / % PFE 1 13 Gland 304SS 1 14 Belleville washer 301SS 2 15 Lock saddle Stainless steel 1 16 Shaft nut 304SS Stop bolt Stainless steel Handle CF8 1 DN 15 - (NPS ½ - 2) 19 riangle stopper Stainless steel 1 DN 65 - (NPS 2½ - 12) 20 Handle adapter CF8 DN (NPS 2½ - 5) 1 DN 65 - (NPS 2½ - 12) 21 Handle SGP Zn plating 1 DN 65 - (NPS 2½ - 12) 22 Locking trigger Stainless steel 1 23 Handle sleeve Vinyl 1 24 Rivet 304SS 1 * For DIN valves, the body and cap material will be / * For JIS valves, the body and cap material will be SCS14A/SCPH2 Note 1: Standard shaft material FEAURES Patented SEALMASER shaft arrangement Double shaft sealing complies with A Luft fugitive emission requirements Blow-out proof shaft ISO 5211 mounting plate Anti-static design according to EN 1983 / ISO Valve pressure rating: - ASME Class 1/ - DIN PN 10/16/25/40 - JIS 10K/20K wo piece, split body ball valve with flanged ends Carbon steel or stainless steel bodies Locking device Various seat material options Investment cast body - DN 15 - (NPS ½ - 4) Sand cast body - DN (NPS 5-12) Size range DN 15 - (NPS ½ - 12) - Full bore ightness to EN , Rate A Optional casting per AD0-W0 Patented POSILOCK handle for DN 15 - (NPS ½ - 2) - Full bore NOE For Pressure/emperature charts, please refer to page 34 and 35 Body material Size Class 1, 10K, PN 10/16 Class, 20K, PN 25/40 CF8M, SCS14A, NPS ½ NPS (A276-S31803) NPS (A276-S31803) 2205 (A276-S31803) WCB, SCPH2, NPS ½ NPS (A ) NPS (A ) 17-4 (A ) 22

23 F190F - SPLI BODY FLANGED BALL VALVE - FIRE SAFE a Handle for valve Size DN 65 - (NPS 2½ - 12) MAERIALS OF CONSRUCION No. Part name Material Quantity 1* Body ASM A351 Gr. CF8M / ASM A216 Gr. WCB 1 2* Cap ASM A351 Gr. CF8M / ASM A216 Gr. WCB 1 3 Ball ASM A351 Gr. CF8M 1 4 Anti-static shaft A276 ype 316 (Note 1) 1 5 Ball seat PFE 2 6 Body seal Graphite DN 15 - (NPS ½ - 4) / 1 316SS Spiral wound graphite DN (NPS 5-12) 7 Stud A193 Gr.B8 / A193 Gr.B a Nut A194 Gr. 8 / A194 Gr. 2H Lower shaft seal % SS powder / % PFE 1 9 Compress ring 316L SS DN 15 - (NPS ½ - 4) / SS DN (NPS 5-12) 10 Upper shaft seal Graphite 1 11 Shaft packing Graphite 1 set 12 hrust washer % SS powder / % PFE 1 13 Gland 304SS 1 14 Belleville washer 301SS 2 15 Lock saddle Stainless steel 1 16 Shaft nut 304SS Stop bolt Stainless steel Handle CF8 1 DN 15 - (NPS ½ - 2) 19 riangle stopper Stainless steel 1 DN 65 - (NPS 2½ - 12) 20 Handle adapter CF8 DN (NPS 2½ - 5) 1 DN 65 - (NPS 2½ - 12) A536 DN 1 - (NPS 6-12) 21 Handle SGP Zn plating 1 DN 65 - (NPS 2½ - 12) 22 Locking trigger Stainless steel 1 23 Handle sleeve Vinyl 1 24 Rivet 304SS 1 * For DIN valves, the body and cap material will be / * For JIS valves, the body and cap material will be SCS14A/SCPH2 Note 1: Standard shaft material FEAURES Patented SEALMASER shaft arrangement Double shaft seal design Blow-out proof shaft ISO 5211 mounting plate Anti-static design according to EN 1983 / ISO / BS5351 Valve pressure rating: - ASME Class 1/ - DIN PN 10/16/25/40 - JIS 10K/20K wo-piece, split-body ball valve Flexible graphite body and shaft packing for Hi-temp resistance Secondary metal to metal seating surface Fire tested: DN 15 - (NPS ½ - 8): - API th edition - ISO 10497:4 DN - (NPS 10-12): - API th edition Size range DN 15 - (NPS ½ - 12) - Full bore ightness to EN , Rate A Patented POSILOCK handle for DN 15 - (NPS ½ - 2) - Full bore NOE For Pressure/emperature charts, please refer to page 34 and 35 Body material Size Class 1, 10K, PN 10/16 Class, 20K, PN 25/40 CF8M, SCS14A, NPS ½ NPS (A276-S31803) NPS (A276-S31803) 2205 (A276-S31803) WCB, SCPH2, NPS ½ NPS (A ) NPS (A ) 17-4 (A ) 23

24 F190/190F - SPLI BODY FLANGED BALL VALVE Sizes DN 15 - (NPS ½ - 2) Sizes DN 65 - (NPS 2½ - 12) Ød1 ØC ØB ØD K H J L f DN 15 - (NPS ½ - 4) DN (NPS 5-8) DN 2 - (NPS 10-12) DN 2 - (NPS 10-12) Optional DIMENSIONS (mm) NPS DN A ØP F G B W M H H1 J K X Y ½ M ¾ M M ¼ M ½ M M ½ M10* M10* M10* M10* M M M M * For DN (NPS 2½ - 5) JIS 10K/20K, W = M12 24

25 F190/190F - SPLI BODY FLANGED BALL VALVE ASME 1/ DIMENSIONS (mm) ØB ØD L N Øn Wt (kg) NPS DN ØC Ød1 f 1 ½ ¾ ½ ½ Face to face dimensions to ASME B16.10 DIN PN 10/16/25/40 DIMENSIONS (mm) NPS DN PN ØB ØC ØD L *L N Øn Ød1 f F1 F4/F5 ½ 15 10/16/25/ ¾ 20 10/16/25/ /16/25/ ¼ 32 10/16/25/ ½ 40 10/16/25/ / / ½ 65 10/ / / / / / / / / / L Dimensions EN 558 Series 27 *L Dimensions EN 558 Series 1 Wt (kg) JIS 10K/20K DIMENSIONS (mm) ØB ØC ØD L N Øn Wt (kg) NPS DN 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K 10K 20K J K Ød1 f H 10K 20K ½ 15A ¾ 20A A ¼ 32A ½ 40A A ½ 65A A A A A A A A

26 FLOW PLAN CHAR (ONLY FOR 3-WAY BALL VALVE) -POR 90 URN Position 1 Position 2 Position 1 Position 2 Position 1 Position 2 Position 1 Position 2 FLOW PLAN D FLOW PLAN E FLOW PLAN F FLOW PLAN G -POR 180 URN Position 1 Position 2 Position 3 Position 1 Position 2 Position 3 FLOW PLAN H FLOW PLAN I Position 1 Position 2 Position 3 Position 1 Position 2 Position 3 FLOW PLAN J FLOW PLAN K L-POR 90 URN Position 1 Position 2 L-POR 180 URN Position 1 Position 2 Position 3 FLOW PLAN A FLOW PLAN B LL-POR* 90 URN (not available for F133M, F138 and F139) Position 1 Position 2 LL-POR 180 URN (not available for F138 and F139) 4-way valves Position 1 Position 2 Position 3 FLOW PLAN M FLOW PLAN N * Please consult factory for minimum quantity. 26

27 COMPLEE VALVE RANGE AVAILABILIY MARIX (MODELS AND SIZES AVAILABLE) DN Model NPS ¼ ⅜ ½ ¾ 1 1¼ 1½ 2 2½ R110/R112 - SS F120 - SS F130M F133M - SS RB - CS RB - SS RB - CS RB R138 - SS F171 - SS - CS F171 - SS F180/R180 - SS F180F/ - SS R180F - CS - SS F190 - CS - SS F190F - CS SS = Stainless Steel CS = Carbon Steel RB = Reduced Bore F171 DIFFERENIAL-PRESSURE ORQUE (Nm) Seat: Pressure: bar (psi) MAS (Nm) PFE / RPFE A SS NPS DN 0 () () (700) (0) (10) ½ ¾ ¼ ½ ½

28 COMPLEE VALVE RANGE F180/R180, F180F/R180F DIFFERENIAL-PRESSURE ORQUE (Nm) Seat: Pressure: bar (psi) MAS (Nm) PFE / RPFE A SS NPS DN 0 () () (700) (0) (10) (Note 8) ½ ¾ ¼ ½ ½ F190, F190F DIFFERENIAL-PRESSURE ORQUE (Nm) Seat: Pressure: bar (psi) MAS (Nm) PFE / RPFE A SS NPS DN 0 () () () () (0) () (700) ½ ¾ ¼ ½ ½ F130M, F133M MAX. BREAK-AWAY ORQUE Seat: PFE / RPFE MAS (Nm) NPS DN Nm kgfcm A SS ⅜ ½ ¾ ¼ ½ ½ NOES 1. Increase by 25% for MG1241, carbon and SS filled seat. 2. Increase by 15% for dry gas or oil free products. 3. Increase by 40% for dry gas (- and below). 4. Increase by 40% for gas or liquid with slurry powder (above -). 5. Increase by 40% for high viscosity fluid (above -). 6. For actuator sizing, we recommend to add at least 20% of the break-away torque of valve as safety factor. 7. Valve torques refer to ball valves with full port. For reduced port valve torque take one size smaller. 8. MAS (maximum allowable shaft torque) for full bore option. Other shaft options available. 28

29 SEALMASER POSILOCK HANDLE Pull the locking trigger up Spring compressed Release the trigger. And the elasticity of the spring makes the trigger automatically bounce back to its original position PARS LIS No. Parts name 1 Handle 2 Spring 3 Locking trigger FEAURES Simple construction Smooth action for locking trigger Wrapped locking trigger design prevents the spring from coming out he elasticity of the spring makes the trigger automatically bounce back to its original position, which keeps the plate in position for firm locking. his also avoids unwanted valve operation caused by accident. PAENED SEALMASER SHAF SEAL ARRANGEMEN - AVAILABLE FOR FIGURES F130M, F133M, F171, F180/R180, F190 Our extremely high cycle shaft sealing design is accomplished by double sealing system. he high performance of our ball valves is mainly due to unique SEALMASER shaft seal arrangement, which provides a primary sealing. It has been specially designed and constructed to prevent line fluid permeation and resultant leakage. On top of this arrangement are multiple layers of V-ring shaft packing, this acts as secondary sealing. A set of Belleville washers automatically and constantly compresses the seals to adjust for wear, pressure and temperature fluctuations. Our ball valve is a stalwart barrier against fugitive emissions. Belleville washers V-ring shaft packing SEALMASER 29

30 SEALMASER EXPLANAION OF SEALMASER he live loaded SEALMASER is a combination of 3 components; (A) a cup and cone PFA/FE upper thrust seal, (B) a cup and cone sintered SS316 center load ring and (C) a flat SS/FE lower thrust seal. When tightened, the live loaded shaft pulls up and compressing the shaft thrust seals. As this happens, material from upper and lower thrust seal extrude between shaft and body enclosures. (See 1-6). he surfaces between the bottom of lower thrust seal and top of shaft flange are smooth and all rotation occurs between these two surfaces leaving the shaft thrust seal static to create the best possible seal. As rotation continues, components bed in and keep seal performance constant with usage. A B C MAIN FEAURES OF SEALMASER - PAENED SHAF SEAL ARRANGEMEN Multiple sealing up to 6 areas (see view 1-6). Encapsulated static sealing achieved on upper thrust seal. Constant sealing force transmitted to shaft (see arrow) and making the shaft primary sealing positive. Excellent wear resistance on lower thrust seal (% SS filled PFE). Standard shaft finish better than Ra 0.8 µm (1 Grit) to reduce seals friction to a minimum SHAF SEAL ARRANGEMEN DN 8 (NPS ¼) DN 8-10 (NPS ¼ - ⅜) F133M F171, F180/R180 and F180F/R180R Patented SEALMASER DN 8-40 (NPS ¼ - 1½) DN - 1 (NPS 2-6) DN 15 - (NPS ½ - 12) F133M F130M F171, F171, F180/R180, F180F/R180R and F190/F190F No. Part name Material Shaft seal arrangement Patented SEALMASER shaft seal arrangement 1 Lower thrust washer % SS powder / % PFE 2 Compress ring 316 SS 3 Upper thrust washer FM 1 4 V-ring shaft packing PFE 5 hrust washer % SS powder / % PFE 6 Flat thrust washer % SS powder / % PFE 7 Shaft packing 15% Graphite + PFE means available 30

31 R110/R112, F120, F130M - PRESSURE/EMPERAURE CHARS R110/R112 ONE-PIECE BODY BALL VALVE DN 8 to DN (NPS ¼ to NPS 2) - reduced bore 1 F120 WO-PIECE BODY BALL VALVE DN 8 to DN (NPS ¼ to NPS 2) - full bore (14) 1 emperature 2-10 (14) 1 emperature 2 F130M HREE-WAY SPLI-BODY BALL VALVE PN 16, PN 10: DN to DN 1 (NPS 2 to NPS 6) - full bore DN (NPS 8) - reduced bore 1 F130M HREE-WAY SPLI-BODY BALL VALVE ASME Class 1: DN to DN 1 (NPS 2 to NPS 6) - full bore DN (NPS 8) - reduced bore PN16 PN16 PN10 PN10 R Class 1 Class 1 R -10 (14) 1 emperature (-20) (32) 1 emperature 2 R = body rating = body rating = WCB body rating = CF8M body rating = PFE = RPFE 31

32 F133, R138, F155 - PRESSURE/EMPERAURE CHARS F133M/F133M HREE- AND FOUR-WAY SPLI-BODY BALL VALVE PN 63, PN 40, PN 25, PN 16, PN 10: DN 10 to DN 40 (NPS ⅜ to NPS 1½) - full bore DN 15 to DN (NPS ½ to NPS 2) - reduced bore 1 F133M/F133M HREE- AND FOUR-WAY SPLI-BODY BALL VALVE ASME Class 1/: DN 10 to DN 40 (NPS ⅜ to NPS 1½) - full bore DN 15 to DN (NPS ½ to NPS 2) - reduced bore PN63 PN63 PN25 PN25 PN10 PN10 PN40 PN40 R PN16 PN16 Class Class Class 1 Class 1 R -10 (14) 1 emperature (-20) (32) 1 emperature 2 R138 HREE-WAY MULI-POR BALL VALVE DN 8 to DN (NPS ¼ to NPS 2) - reduced bore 1 F155 HREE-PIECE ECONOMICAL BALL VALVE DN 8 to DN Rating: PN63 1 R 0 DN 65 to DN Rating: PN (14) 1 emperature 2-10 (14) 1 emperature 2 R = body rating = body rating = WCB body rating = CF8M body rating = PFE = RPFE 32