Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
|
|
- Debra Parsons
- 5 years ago
- Views:
Transcription
1 Valves, Automation & Controls SERIES 88 I PURITY TUBE ULL PORT 3-PIECE BALL VALVE
2 Design & eatures Body Material 316L Stainless Steel ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical, biotech, cosmetic, food and other industries where aseptic conditions are required. 5% or Less errite Content Content of less than 5% to prevent rouging. Low Sulphur All welded end parts made from 316L stainless steel are supplied with sulphur content of % assuring the integrity of the orbital welding. (BPE-2009) All Wetted Parts Polish To Ra, 240 rit Significantly reduces friction between valve and media. Crevice-free smooth surface helps eliminate areas where contaminants can proliferate. (BPE-2009) DA Compliant Material ygienic Seat and Seal Design PTE and TM seats provide a bubble-tight bidirectional shut off. Encapsulated PTE and TM body seals eliminate entrapment area between valve body and valve ends. Optional PTE cavity fillers eliminate the dead space between the ball and valve body. Extended Butt Weld Ends Meets table DT-4 minimal length for automatic welding. (BPE-2009) 3-Piece Design In-line serviceable swing out center section allows easy access to internal valve components without disturbing alignment of pipe. loating Ball Design Precision engineered and machined solid stainless steel ball with relief hole in the stem slot prevents build-up of cavity pressure while the valve is open. Stem Design Live-loaded, bottom entry, blowout proof stem featuring packing that extends valve cycle life over conventional ball valves and is best choice for actuation. Stem seals are live-loaded using Belleville springs to provide consistent sealing forces, reducing or eliminating the need for frequent seal adjustment. ISO 5211 Integral Mounting Pad Ideal for actuation. Centering lip feature assures precise alignment of bracket, stem and coupler. Actuators may be retrofitted on existing Sharpe Series 88 without disruption of line integrity. Allows for secondary containment unit to be added when necessary. Tongue and roove Design ully encapsulated body seals, allowing ends to be welded in-line, without time consuming and labor intensive disassembly. Design compensates for bolt expansion and reduces the chance of external leakage. elps prevent seal ruptures in high pressure, cryogenic or steam applications. Variety of End Combinations End connections available include; Clamp End (CE), Butt Weld Extensions ( BTE) for orbital welders. Optional ends include but are not limited to; Short Butt Weld Tube, Butt Weld Tube of Cherry Burrell I, S & Q line and lush Bottom Tank Pads. Encapsulated Body Bolts eavy duty stainless steel bolting is protected from outside environment assuring valve integrity. Ideal for wash-downs. Lockable andle All Sharpe Series 88 valves are supplied with lever or pipe handles and are designed to permit locking the valve in either the open or closed position. Traceability Body, end piece, ball and stems are marked with heat codes providing traceability to the chemical analysis and material test reports performed at the foundry. CMTR s are supplied with every Sharpe Series 88 Ball Valves. 3
3 Parts & Materials Series 88 1/4" - 2" Series 88 21/2" 4 No. Part Name Qty Material 1 Body 1 316L Stainless Steel ASTM A351 C3M 2 Pipe Ends 2 316L Stainless Steel ASTM A351 C3M 3 Ball 1 316L Stainless Steel 4 Stem 1 316L Stainless Steel 5 Seat 2 TM, PTE/RTE/Cavity iller PTE 6 Body Seal 2/3 PTE, TM 7 Thrust Bearing 1 TM 8 Thrust Bearing 1 TM 9 Stem Packing 3 TM 10 Seal Protector 1 TM 11 land Series Stainless Steel 12 Belleville Washer Series Stainless Steel 13 Packing Nut Series Stainless Steel 14 Lock Tab Series Stainless Steel 15 Lower Lock Latch Series Stainless Steel 15B Upper Lock Latch Series Stainless Steel 15C Latch Bolt Series Stainless Steel 16 andle Series Stainless Steel 17 Lock Washer Series Stainless Steel 18 andle Nut (1/4" - 2") Series Stainless Steel 19 Body Bolts Stainless Steel 20 Nuts Series Stainless Steel 21 Stop Pin (1/2")* Series Stainless Steel 300 Series Stainless Steel No. Part Name Qty Material 1 Body 1 316L Stainless Steel ASTM A351 C3M 2 Pipe Ends 2 316L Stainless Stee ASTM A351 C3M 3 Ball 1 316L Stainless Steel 4 Seat 2 TM, PTE/RTE/Cavity iller PTE 5 Body Seal 2 PTE, TM 6 Thrust Bearing 2 TM 7 Stem 1 316L Stainless Steel 8 Stem Seal 3 TM 9 land Series Stainless Steel 10 Stopper Series Stainless Steel 11 Belleville Washer Series Stainless Steel 12 Packing Nut Series Stainless Steel 13 Lock Tab Series Stainless Steel 14 Wrench Block Series Stainless Steel 15 andle Bolt Series Stainless Steel 16 Stop Pin Series Stainless Steel 17 Body Bolts Stainless Steel 18 Body Nuts Series Stainless Steel 19 andle Series Stainless Steel 20 land Washer Series Stainless Steel 21 Screw Stainless Steel 22 Lower Stopper Stainless Steel
4 Parts & Materials Series 88-3" - 4" No. Part Name Qty Material 1 Body 1 316L Stainless Steel ASTM A351 C3M 2 Pipe Ends 2 316L Stainless Stee ASTM A351 C3M 3 Ball 1 316L Stainless Steel 4 Stem 1 316L Stainless Steel 5 Seat 2 TM, PTE/RTE/Cavity iller PTE 6 Body Seal 2 PTE, TM 7 Thrust Bearing 1 TM 7A Stem Location Ring Series Stainless Steel 8 Thrust Bearing 1 TM 9 Stem Packing 3 TM 9A Packing Protector Series Stainless Steel No. Part Name Qty Material 10 land Series Stainless Steel 11 Belleville Washer Series Stainless Steel 12 Packing Nut Series Stainless Steel 13 Lock Tab Series Stainless Steel 14 andle Series Stainless Steel 15 Wrench Block Series Stainless Steel 16 ex ead Bolt Series Stainless Steel 17 Body Bolts Stainless Steel 18 Stop Pin Series Stainless Steel 19 Seat Retainer Series Stainless Steel 20 Stopper Series Stainless Steel 5
5 Dimensions 1/2-2 C D N E M 21/2 C D N J M PCD ØT B A I PCD ØT E E C D C D N M J I PCD ØT B A B A 3 & 4 E C D N M PCD ØT B A Size A B C D E T N M I J 1/ M / / M / M / / M / M / / M M20 x P M M The dimensions above are for informational purpose only. Please refer to Sharpe Valves if you need dimensions for construction.
6 Technical Information 1400 Pressure-Temperature Ratings Series ¼" - 2" 1000 ¼" - 2" 800 Pressure (PSI) ½" - 4" Temperature ( ) * Ratings are for the valve body, specific ends may cause the ratings to change. Available Options Mechanical Polishing Available to 320 rit (10 Ra). Improves machined surface by removing entrapment areas and adding a high luster appearance. Electro-Polishing Improves surface finish of mechanical polishing up to 50%. Passivates surface for increased corrosion resistance. Removes any entrapped contaminants. Purge Ports Available on bodies or ends. These ports are suitable for CIP (clean in place) and SIP (sterilize in place) applications. lush Bottom Tank Pads ighly polished and made from 316L bar stock. Tube full port assures quick unobstructed drainage. 7
7 Technical Information Conversion Table of surface finishes Surface Designation ASME Mechanically Polished Ra Average Ra Max BPE µ-in. µ-m µ-in. µ-m SV SV SV Conversion Table Chart Standard rit Ra RMS µ-in. µ-m µ-in. µ-m 150 rit rit rit rit Surface Designation ASME Mechanically Polished and Eletropolished Ra Average Ra Max BPE µ-in. µ-m µ-in. µ-m SV SV SV Approx. Weight (Lbs.) SIZE TRI CLAMP END EXTENDED BUTT WELD END SORT BUTT WELD ¼" ⅜" ½" ¾" " ¼" ½" " ½" " " Cv actor SIZE Cv ¼" 1.5 ⅜" 3.2 ½" 8.1 ¾" " 67 1¼" 110 1½" 192 2" 434 2½" 779 3" "
8 ow To Order ig: 1-1/ T - T - CE Size Series Body & Ends Ball & Stem Seat Body Seal Ends Options 1/4* L Stainless Steel 6 316L Stainless Steel T PTE M TM CE Clamp Ends EP Electro Polish* 3/8* M TM T PTE BTE Butt-weld Tube Extended rit / 8-10 RA* 1/2 R RTE BE Butt-weld (Short)* PP1 Purge Port on One End* 3/4 C Cavity iller - PTE TP lush Bottom Tank Pad* PP2 Purge Port on Two Ends * 1 PP3 Purge Port on Ends & Body* 1-1/4* CERRY BURRELL PPB Purge Port on Body* 1-1/2 I I Line* V Purge with VCR emale* 2 S S Line* C Purge Port Compression* 2-1/2 Q Q Line* VM Purge Port VCR Male* 3 OT Purge Port O.D. Tubing* 4 C Purge Port with Clamp* X Oxygen Service*(As Per M's Standards) O Oval andle L Lockable Stem Ext. *POA TM is a registered trademark of Dyneon, LLC Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required. Toll ree ax Los Angeles, CA Chicago, IL Atlanta, A Vancouver, WA ouston, TX Rev 3/16
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
More informationSERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationSection G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationSERIES 203FB SPECIFICATIONS. Internal Surface Finish. CV & Weight Chart
SERIES 203FB 3-Piece Body Hygienic Ball Valve Valve Sizes: I /2" to 4", Optional 6" 3 piece body allows end connection variations Quick acting I /4 turn operation with visual indications of the flow Unobstructed
More informationIndianapolis Chicago San Juan SVF CleanFLOW HIGH PURITY BALL VALVES
SVF CleanFLOW HIGH PURITY BALL VALVES The latest ASME/BPE guideline for valve and tubing designs used in biotech and pharmaceutical applications provides process engineers with a reliable and measurable
More informationBall and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationSection G TOP-FLO Series 77 High Purity Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
More informationTUBE BORE SIZE BALL VALVE
BULLETIN P-0 INDUSTRIAL VALVES LTD. S E R I E S TUBE BORE SIZE BALL VALVE Size Range: Application: Service: Material: End Connection: Standards: Operation: /" - " Pharmaceutical, Biotechnology, Food &
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
More informationSPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationD I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV
TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more
More informationM80i ISO Stainless Steel Ball Valve for Sanitary Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSVC/SHC Series. Sanitary Check Valves. NEW - SVC for vertical down process outflow and drain installations. Features
SVC/SHC Series Sanitary Check Valves NEW - SVC for vertical down process outflow and drain installations The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationSanitary Check Valves A solution for the prevent reverse flow and cross contamination.
BOLLETTINO VRN-16 Sanitary Check Valves A solution for the prevent reverse flow and cross contamination. DESCRIPTION STANDARD DESIGN The valve body is machined from solid round bar in stainless steel AISI
More informationBVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationS E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full
More informationSection G TOP-FLO T4V Sanitary V-Port Control Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
More informationVALVE MANIFOLDS. Valve Solutions
VALVE MANIFOLDS Valve Solutions PBM s Fabflex Valve Manifolds A valve engineering and manufacturing company, PBM provides the valve products and services required to minimize contamination, comply with
More informationBiotechnic Aseptic Sampling Valves
VPAK SERIES VPA SERIES APPLICATIONS Bioreactors/Fermentors Sterile Holding Blood/Plasma Processing WFI Storage Media Preparation FEATURES Radial Diaphragm Flush Mounted CIP/SIP Easy Disassembly Design
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationRadial Diaphragm Valve
www.swagelok.com Radial Diaphragm DR Series 36L stainless steel and modified PTFE wetted parts Variety of compact multivalve, multiport configurations Choice of sanitary clamp and butt weld end connections
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationBall Valves. ASME Class 150 to mm mm (¼" - 8") ISO 17292/ API 6D
Ball Valves SM Class 150 to 2500 8 mm - 200 mm (¼" - 8") ISO 17292/ PI 6D L&T Valves Limited is a wholly owned subsidiary of Larsen & Toubro. Backed by a fifty-year track-record of excellence and world-leading
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000
More informationInspired By Challenge. TuBore clean valves
Inspired By Challenge TuBore clean valves Floating Ball Valves ASME BE ISO 7 DIN 80 Ordering code system Introduction 8 series - the TuBore line The TuBore series is Habonim s line of sterile ball valves
More informationSanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
More informationSingle, Two & Three-piece Ball Valves. ASME Class 150, 300 & mm mm (¼"- 8")
Single, Two & Three-piece Ball Valves SM Class 1, 300 & 600 8 mm - 200 mm (¼"- 8") Larsen & Toubro (L&T) is a technology, engineering, construction and manufacturing company. Seven decades of strong, customer-focused
More informationTBV Series Three-piece wafer valves
TBV Series 3100 Three-piece wafer valves Content TBV Series 3100 Three-Piece Wafer Valves Introduction................................................................................3 Features.....................................................................................4
More informationDIN /DIN Aseptic Screwed Union for ISO 1127 Schedule Pipe
/ Aseptic Screwed Union for ISO 1127 Schedule Pipe / Aseptic Screwed Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationBV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart
The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These
More informationASEPTIC SAMPLING VALVES SANITARY SAMPLING VALVES SANITARY SAMPLING BOTTLE TANK BOTTOM ASEPTIC VALVE
BOLLETTINO VRN-18 Sanitary Check Valves The solution to prevent reverse flow. DESCRIPTION preventing reverse flow and assuring process integrity. Versions suitable for horizontal or vertical installation.,
More informationDIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationJSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve The JSBLF is a fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME BPE low flow
More informationType 625. , Maintenance-free piston actuator: Normally Open, Normally. , FDA compliant diaphragms. , Sizes 3/8-3/4
escription The type 65 is an extremely compact pneumatically actuated valve with many features which make them ideal for pharmaceutical and bio-processg applications. Sanitary iaphragm Valve Pneumatically
More informationSanitary Valves JSB Series Back Pressure Valves
3L/T-2R/S33 Series JS Series Compact, High Purity ack Pressure Regulating Valve J-Pure is the first fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME PE
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationFeatures of Aegis HPCV Series Ball Valves
Features of Aegis HPCV Series Ball Valves Aegis HPCV Series high integrity ball valves feature the most advanced technology available for isolating and controlling industries most hazardous process liquids
More informationMark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationkyalfa Laval Unique DV-ST UltraPure
kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a
More informationSanitary Valves Mark 978LF Sanitary Control Valves. Sanitary Low Flow Control Valves. 3L/T-2R/S33 Series Mark 978LF Series. Features.
3L/T-2R/S33 Series Mark 978LF Series Sanitary Low Flow Control Valves The Mark 978LF Sanitary Low Flow Control Valve is designed to meet the stringent specifications for low flow sterile processes. Steriflow's
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationFROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
More informationJSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
More informationMODEL NUMBER - VALVE SELECTION CODES
Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"
More informationWeir-Style Diaphragm Valves
www.swagelok.com Weir-Style Diaphragm s GSI Series Available in sizes 1/2 to 4 Available with a variety of end connections, including Kwik-Clamp and TS series sanitary clamp and tube butt weld 2 Weir-Style
More informationThe VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationNeotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More information26 Series Stainless Steel 2-way Ball Valves
1-800-899-0553 26 Series Stainless Steel 2-way Ball Valves Users Manual Installation, Operation, & Maintenance 1. General Precaution 1.1. Material Section Material deterioration is determined by the contained
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationType 612. , Sizes 3/8, 1/2, 3/4
escription The type 612 is a compact valve with many features which make it ideal for pharmaceutical and bio-processg applications. Sanitary iaphragm Valve Manually operated Standard Features Compact design,
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationBALL VALVES FROM SIMPLE TO COMPLEX DESIGNS. A Guide To Manual And Automated Ball Valves.
SG-2018 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
More informationTechnology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
More informationMicro Pneumatics Pvt. Ltd.
Micro Pneumatics Pvt. Ltd. A member of Group Reliability Efficiency Quality Company Profile Micro Pneumatics Private Limited founded in 1986 with clear vision of excellent quality, reliability and customer
More informationEvans Ball Valves. Evans. High Purity 304 Stainless
Ball Valves High Purity 304 Stainless SG Series 1/4-12 and 15A-300A s CFOS Cleaned and Bagged Integrated Valve Assemblies Standard Spool Assemblies & Custom Spool engths (Customer Specified in Feet) 100%
More informationSeries 44 Ball Valves 3-piece ball valves designed to meet all requirements of ANSI B Worcester Controls PB
PB 401-32 An ISO 9001 Registered Company Series 44 Ball Valves 3-piece ball valves designed to meet all requirements of ANSI B16.34 THE NEW SERIES 44: A quantum advance in ball valve durability, cycle
More informationFLUSH MOUNTED TC CONNECTION. Function: blind cap. Design: Requirement:
TK CONNECTION FLUSH MOUNTED TC CONNECTION Syringe device on TK connection sampling valve on TK Connection Typ. installation Function: Hygienic device features a compact design that allow the installation
More informationBall Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationPRODUCT SPECIFICATION GUIDE. Flow Controls, Inc. VALVES ACTUATORS CONTROLS. Checkout our ANSI Class. Flanged Valves on Page 11!
SVF Flow Controls, Inc. VALVES ACTUATORS CONTROLS Checkout our ANSI Class 1 50, 300 and 600 Flanged on Page 11! PRODUCT SPECIFICATION GUIDE Rev. 09/14 SVF Flow Controls, Inc. 13560 Larwin Circle, Santa
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationTBV Series 2000 Flanged Ball Valve
TBV Series 2000 Flanged Ball Valve TBV Series 2000 Flanged Ball Valve Cameron s TBV Series 2000 flanged ball valve is a unique standard port flanged ball valve, offering almost unlimited versatility with
More informationJSRLF Series. Sanitary Valves JSRLF Series Low Flow Gas Reducing Valves
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas pplication The Steriflow JSRLF Series line of low flow pressure regulators have the ability to handle very high pressures
More informationMulti-port Diaphragm Valve, Forged stainless steel body
Fully machined from SS 316L bar-stock no welded components Increased security no internal fabrication welds Reduced dead leg based on orientation Greater structural integrity Fewer fittings, welds and
More informationMarwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
More informationkysmall, Yet Flexible
. kysmall, Yet Flexible ky Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage,
More informationOPERATION AND MAINTENANCE INSTRUCTIONS
OPERATION AND MAINTENANCE INSTRUCTIONS 334 SERIES THREE-PIECE BALL VALVES 1/4 to 2-1/2 Installation and Operation Always install your valve according to accepted industry standards and practices and operate
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationApplication Pressure reducing valves for the food and pharmaceutical industries
Series 2371 Pressure Regulators Pressure Reducing Valves for the food and pharmaceutical industries Type 2371-10 Pneumatic set point adjustment Type 2371-11 Manual set point adjustment Application Pressure
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More informationJSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
More information