BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
|
|
- Homer Harvey
- 6 years ago
- Views:
Transcription
1 The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized control, flow capacity and pressure drops; all with bi-directional ANSI class Vl shut off. Our exclusive Thrust Washer and Thrust Washer Protector design combine to provide a primary seal, reduce torque and prevent galling. The BVM Series ball valves also feature a floating ball design for low torque and increased cycle life. Characterized V-Balls and full port versions provide multiple Cv values in each size. BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/ /27/17 Features and Benefits High Cycle Packing Design Years of trouble free service Bubble Tight Shut-Off with Zero Leakage Energy efficient Independent Packing Gland Allows in-line servicing Phosphate Coated Carbon Steel Bodies For cost effective applications up to 285 psi at 225 F Available NEMA 4 Actuators Reliable, cost effective control Increased Linear Response Due to the in-line design inherent with characterized control ball valves, line media flows linearly through the piping system. The direct pattern provides increased media control and rapid response times to controller commands. Flow Curve Chart Round Bore 90 V Port C v 60 V Port Percent Open 30 V Port 15 V Port 1/8" Slotted Port These curves of standard ports are general guidelines and are not specific to any particular valve size. BVM-1
2 BVM - Specifications Technical Specifications - BVM Flanged Industrial Ball Valve, 2-1/ Way Carbon Steel Body V-Port Full-Port Service Valve Fluid Temperature Limits Valve Body Pressure Rating Maximum Close-Off Pressure Maximum Recommended Pressure Drop Flow Characteristic Rangeability Leakage End Connections Ambient Operating Temperature Range Materials Chilled/Hot, 50/50 Glycol Solutions and Saturated 2-1/2 to 12 Flanged Valves, 2-Way -20 to 383 F at 190 PSI (-28 to 195 C at 1,310kPa) (689 kpa) ANSI Class 150 (1,965 kpa) 80 PSI (551 kpa) 50 PSI (344 kpa) V15 Port Linear NA V30 Port Modified Equal Percentage NA V60 & 90 Port Equal Percentage NA 200:1 Bubble Tight per API 598 ANSI Class 150 See Actuator Rating (Optional high temperature mounting kit may be required) Body Ball & Stem WCB Carbon Steel 316 Stainless Steel Seat Tek-Fil TFM Stem Seal/Packing RPTFE Body Seal 316/Graphite Body Bolts ASTM A 193 B7 Disclaimer - The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Bray office. Bray, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. BVM - Piping Diagram V-Port valves- Note the arrow engraved on the ends which shows the flow going from the bolt head to the nut so that the V-ball is downstream. Full Port valves are bi-directional. BVM - Mode of Actuation Typical Two-Way Ball Valve Application Coil Return Note: Mount the valve downstream from the coil to minimize heat transfer to the actuator. Supply BVM - For Applications Install valve with stem at 45 to 90 from vertical. Media Flow entering valve from left. Installing the V downstream is preferred. 45 to 90 BVM-2
3 BVM - Cut-Away View The BVM Flanged Series Ball Valves feature a floating ball design for low torque and increased cycle life. Most standard large size valves feature trunnion-type ball support. These rugged ball valves are ideal for heavy commercial and industrialtype applications. Stem Seals BVM Flanged Series Valves 2½ 12 valves utilize an independent packing gland which can be easily adjusted without removing mounting hardware or operator. The packing gland is contoured to more uniformly distribute the load across the packing. The primary stem seal is a combination of a thrust washer and a thrust washer protector. An adjustable stem packing creates a secondary seal between the stem and body. The stem packing is composed of RPTFE V-rings as standard graphite stem packing is standard on all Fire Safe valves. Ball BVM Flanged Series Valves balls are precision machined and mirror finished for bubble-tight shut off and less operating torque. As an added safety feature, a hole in the stem slot of each ball equalizes pressure between the body cavity and the line media flow. Seat The seat design ensures bi-directional, bubble-tight sealing with low operating torque. All resilient seats feature relief slots or seat O.D. clearance to relieve pressure past the upstream seat, and positive preloading to ensure low pressure/vacuum sealing. Stem Assemblies BVM Flanged Series Valves are heavy duty, high quality stems with double D connection to ball and operator mounting. Stems are mated with the ball to ensure positive contact. All stems are internal entry and blowout proof for maximum safety Stem Packing An adjustable V-ring design creates a multiple seal between the stem and body. Each stem assembly is composed of three or four (dependent on valve size) rings providing a very high cycle life by resisting creep and cold flow. The Thrust Washer and the Thrust Washer Protector combine to provide a primary seal, reduce torque and prevent galling. Stem Nut and Tab Lock Washer Belleville Washers Packing Gland PEEK Protector Stem Packing Anti-Static Devices Tek-Fil Thrust Washer PEEK Protector Anti-Static Devices BVM-3
4 BVM -2-Way Actuator Selection and and Close-Off Chart 2-Way BVM Actuator Selection/Close-Off (PSI) - and On/Off & Floating H H H H H H AU-2130 AU SVH SVH SVH SVH SVH SVH AU-2130SV AU-4068SV Valve Models Modulating in. mm Flow Coefficient Cv Kv BVM250-CF BVM250-CF BVM250-CF BVM250-CF BVM250-CF * BVM3-CF BVM3-CF BVM3-CF BVM3-CF BVM3-CF ,150.0* BVM4-CF BVM4-CF BVM4-CF BVM4-CF BVM4-CF ,100.0* 1,810.2 BVM6-CF BVM6-CF BVM6-CF BVM6-CF BVM6-CF ,000.0* 4,310.0 BVM8-CF BVM8-CF BVM8-CF BVM8-CF , ,428.2 BVM8-CF ,600.0* 8,275.2 BVM10-CF BVM10-CF BVM10-CF , ,345.2 BVM10-CF , ,231.5 BVM10-CF ,000.0* 12,930.0 BVM12-CF , BVM12-CF , BVM12-CF , ,883.2 BVM12-CF , BVM12-CF ,000.0* 18,102.0 V-port ball valves have a 20% to 85% angle of controllability * Full Port Valves For steam applications, install valve with stem at 45 to 90 from vertical. Series 70 - ONLY Series 70 - Key = BVM3-CF15-32 Industrial Flanged Ball Valve Series (in.) AU Series BVM 3 CF15 32 Material CF15 = Carbon Steel Cv BVM-4
5 BVM - 2-Way - Flanged Ball Valve/Industrial Actuator Dimensions 2-Way Setup - Industrial Actuator C B 2-Way BVM Dimensions, 2-1/ Flanged BVM Series - with Industrial Actuators Valve Models in. mm Flow Coefficient Cv Kv BVM250-CF BVM250-CF BVM250-CF BVM250-CF BVM250-CF * BVM3-CF BVM3-CF BVM3-CF BVM3-CF BVM3-CF ,150.0* BVM4-CF BVM4-CF BVM4-CF BVM4-CF BVM4-CF ,100.0* 1,810.2 BVM6-CF BVM6-CF BVM6-CF BVM6-CF BVM6-CF ,000.0* 4,310.0 BVM8-CF BVM8-CF BVM8-CF BVM8-CF , ,428.2 BVM8-CF ,600.0* 8,275.2 BVM10-CF BVM10-CF BVM10-CF , ,345.2 BVM10-CF , ,231.5 BVM10-CF ,000.0* 12,930.0 BVM12-CF , BVM12-CF , BVM12-CF , ,883.2 BVM12-CF , BVM12-CF ,000.0* 18, Weights are for valve assemblies. (based on largest selectable actuator) - Largest actuator dimension shown. * Full Port Valves For steam applications, install valve with stem at 45 to 90 from vertical. A A B C Weight (191) 8.0 (203) 9.0 (229) 15.5 (394) 18.0 (457) 21.0 (533) 24.0 (610) (357) 14.3 (364) 15.1 (382) 18.5 (471) 19.0 (482) 28.6 (726) 29.8 (757) (358) (358) 33.5 (851) 36.2 (920) lbs. kg BVM-5
BV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart
The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationSTM Series Flanged Characterized Ball Valves
TM eries Flanged Ball Valves are designed to regulate the flow of hot water, chilled water, and % glycol solutions to the demand of a controller in Heating, Ventilating, and Air Conditioning (HVAC) systems.the
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationVELAN TRUNNION-MOUNTED
VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationVF Series High-Pressure, High-Temperature Butterfly Valves
Product Bulletin VF Series No. 3 Issue Date 11/01/01 VF Series High-Pressure, High-Temperature Butterfly s VF Series High-Pressure, High-Temperature Butterfly s are specifically designed for a wide range
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationFeatures Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
More informationFlanged End FloaF. Ideal Design for Process and Petrochemical Applications
Tech Bulletin Page 5- Flanged End FloaF loating Ball Valves Ideal Design for Process and Petrochemical Applications Size - 3 F FULL-FLO SERIES Models F50 Class 50 / F Class Full Port:/2" - 2" Standard
More informationSimple Set COMMERCIAL. Pressure Independent Control Valves 2 Way 1/2-2 02/16/18 COMMERCIAL
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationSV SERIES. Metal Seated Ball Valves
SV SERIES Metal Seated Ball Valves 1/2 THRU 12 ANSI 150# THRU ANSI 1500# FULL PORT AND REDUCED PORT UNI-DIRECTIONAL AND BI-DIRECTIONAL 316SS OR CARBON STEEL BODY LIVE LOADED STEM PACKING HIGH QUALITY CASTINGS
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationCLASS 150 & 300 REDUCED BORE BALL VALVES
CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationSERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
More informationMK Series - High Performance Butterfly Valves Operation and Maintenance Instructions
COMMERCIAL Bray Controls Commercial Division 13788 West Road, Suite 200A Houston, Texas 77041 BCDSales@Bray.com Phone: 1-888-412-2729 Fax: 1-888-412-2720 www.braycommercialdivision.com MK Series - High
More informationCharacterized Port -CP Three-Way Ball Valves
Characterized Port Three Way Ball Valves Technical Instructions The Characterized Port (-CP) Series 3-way Ball Valves are coupled with our Type A actuators to provide three-way mixing or diverting flow
More information26 Series Stainless Steel 2-way Ball Valves
1-800-899-0553 26 Series Stainless Steel 2-way Ball Valves Users Manual Installation, Operation, & Maintenance 1. General Precaution 1.1. Material Section Material deterioration is determined by the contained
More informationHIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000
More informationK-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
More informationInnovative World Leader
Innovative World Leader The ANSWER to Tight shut-off in various applications, Series 600 Triple offset butterfly valve is a virtual solution for heavy duty process, high pressure & temperature, and high
More information3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationHigh Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
More informationValves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
More informationElectronic Ball Valve Guide Specifications
Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationHSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationBALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationThe VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
More informationMARPAC K SERIES. Full Bore Fire Safe Flanged Ball Valves
MARPAC K SERIES Full Bore Fire Safe Flanged Ball Valves The Flowserve Marpac flanged full bore valve range provides customers with specification compliant product with long service free life resulting
More informationATi Max Series. Pressure Independent Control Valves 2 Way 2-1/2-6
The Auto Touch Independent Max (ATiMX) valve brings pressure independent control technology to valves up to 6 and flow rates up to 468 GPM. It is a state-of-the-art control valve combining a high quality/
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSERIES Way Divert Valve Assembly, 2-inch to 4-inch
SERIES 7300 3-Way Divert Valve Assembly, 2-inch to 4-inch Publication -101 Issue 10/16 Rev.A Electric DC Motor is rated for 100% duty cycle and never requires maintenance The gear assembly comes standard
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationBall and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
More informationNeotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
More informationR o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
More informationSeries 41 Full Bore Seated Ball Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100
Technical Bulletin B-410 Series 41 Full Bore Seated Ball Valves for ANSI 150 600 (PN20-100) DIN/BS 4504 PN10-PN100 Series 41 Features General Series 41 ball valves are off-the-shelf standard valves that
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationCV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction
4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element
More information20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves
VFB30 Series Issue Date February 1, 2016 20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves Low Torque Facilitates the use of smaller, less expensive directmount rotary-motion actuators Extends
More informationTwo-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationAdvanced V-Control Ball Valves, 1/4-12 Pneumatic, Electro-Pneumatic & Electric Controls
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Advanced V-Control Ball Valves, 1/4-12 Pneumatic, Electro-Pneumatic & Electric Controls Threaded, Socket Weld, Butt Weld & Flanged
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationTECHNICAL BULLETIN. Audco Ball Valve. Reduced Bore Fire safe Flanged Ball Valves 51/52 Series. Experience In Motion
Audco Ball Valve Reduced Bore Fire safe Flanged Ball Valves 51/52 Series TECHNICAL BULLETIN Experience In Motion With the Series 51/52 designed to BS EN ISO 17292 / API 6D, AUDCO brings to the market a
More informationBS 5351 ASME CLASS: SIZES: mm ( 1 /2 12 )
BS 5351 ASME CLASS: 150 300 SIZES: 15 300mm ( 1 /2 12 ) PROFILE Velan is the world's leading manufacturer of steel gate, globe, check, ball, knife and butterfly valves, 8 1500 mm ( 1 4 60 ), ASME Classes
More informationTri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4
RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More informationSingle, Two & Three-piece Ball Valves. ASME Class 150, 300 & mm mm (¼"- 8")
Single, Two & Three-piece Ball Valves SM Class 1, 300 & 600 8 mm - 200 mm (¼"- 8") Larsen & Toubro (L&T) is a technology, engineering, construction and manufacturing company. Seven decades of strong, customer-focused
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More information2000 WOG Sizes: 1 /2 2 (15 50 mm) Fully Rated to ASME B16.34 Fire-Tested to API 607 Rev. 4
2000 WOG Sizes: 1 /2 2 (15 50 mm) Fully Rated to ASME B16.34 Fire-Tested to API 607 Rev. 4 VTP-2000 3-PIECE BALL VALVE REGULAR PORT, THREADED OR SOCKET WELD ENDS, 1 /2 1 (15 25 mm) 2000 WOG; 1 1 /2 2 (40
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationBALL valve FLOATING BALL VALVE
BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationF8/FB8 Series Ball Valves IOM-F8/FB8
!!!CAUTION! Safety Precautions!!! Before removing valve from pipeline NOTE that: Media flowing through a valve may be corrosive, toxic, flammable, or a contaminant of harmful nature. Where there is evidence
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationVG6000 Series Forged Brass Valves
VG6000 Series Forged Brass Valves Product Bulletin PB_VG6000 Issue Date 04 2008 The VG6000 forged brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller
More informationBray/Mckannalok Butterfly Valve Series 40/41/42/43/44/45 Installation Manual Technical Bulletin No Date: May 2004/Page 1 of 6
Date: May 2004/Page 1 of 6 Bray/McCannalok Butterfly Valves Installation and Maintenance Instructions ANSI Classes 150 and 300 - Sizes 2-1/2 through 24 ANSI Classes 600 - Sizes 3 through 16 Bidirectional
More informationV5000. Globe Valves Series for Terminal Units. Product Bulletin
V5000 Globe Valves Series for Terminal Units Product Bulletin The V5000 Valve Series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal unit
More informationMODEL NUMBER - VALVE SELECTION CODES
Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"
More informationBS EN ISO 9001 FM Worcester Controls 5 Series BS 5351 Approved Flanged Ball Valves
BS EN ISO 9001 0086 as FM 00707 Worcester Controls BS 5351 Approved Flanged Ball Valves Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15-50
More information