2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

Size: px
Start display at page:

Download "2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)"

Transcription

1 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment of body. low-out proof stem for safety. Sphericity tolerance of the ball is unsurpassed. Multiple layers of adjustable PTFE chevron packing rings for standard model enable excellent fugitive emission control. Positive position indication. ocking device capable. Heavy duty body construction. Machined ISO 5211 top mounting flange. ive load springs keep constant force on stem-seal packing, ensuring seal integrity and extended valve life. Dual shaft bearings for high cycle life operation. Higher v values and less cost for diverting which can be normally done with multiple installation of valves. General application Diverting or mixing fluids. Technical data 2 seats (-port) Model: N11 / N12 / N21 / N22 Full bore: NPS 11/2 - NPS 8 (N11 / N12) Reduced bore: NPS 5 - NPS 10 (N21 / N22) Pressure rating: SME lass 150, JIS 10K, 20K Temperature: -20 F to 518 F* (Option: up to 932 F) * Please consult us for lower temperature 4 seats ( and T-port) Model: M11 / M12 / M21 / M22 Full bore: NPS 1/2 - NPS 8 (M11 / M12) Reduced bore: NPS 5 - NPS 8 (M21 / M22) Pressure rating: SME lass 150, JIS 10K, 20K Temperature: -20 F to 302 F 2 seats feature OM2 compatible, co-polymer E-seat as standard. Machined firesafe lip for metal touch to ball in case of fire. It also eliminates possibility of seat deformation. ower operating torque, easing operation and reducing actuator cost. 4 seats feature Equipped with 4 seats so that each port can be used as an inlet. vailable with -port and T-port for variety of applications. E-seat as standard for M11 and M Emerson. ll rights reserved. VTDS US 14/11

2 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) 2-SETS (-PORT) N11, N12, FU ORE / N21, N22 REDUED ORE 25 7,8, ,12 20, 21, Stem detail Note: The illustration shows body construction of 3-way ball valve, Model N11 in NPS 3 Parts ist No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Shaft 316 S/S or 304 S/S 5 Seat E-seat as standard (T or G seat for options) 6 Gasket R-PTFE 7 Gland bolt 193 (G) 8 8 Washer 316 SS 9 Gland flange F8 10 Gland packing PTFE 11 Stud 193 (G) 8 or 193 (G) 7 12 Nut 194 (G) 8 or 194 (G) 2H 13 ive loading spring 304 S/S 14 nti-static spring 316 S/S 15 nti-static spring 316 S/S 16 Gland bearing PTFE 17 Thrust bearing PTFE 18 Shaft bearing R-PTFE 19 Snap ring 304 S/S 20 Spring washer 304 S/S 21 olt 304 S/S 22 Washer 304 SS 23 Stopper 304 S/S 24 Handle arbon steel 25 Indicator 304 S/S Options NE MR Gratite seat for high temp. service (2 seats} Extension bonnet for low temp. service (2 seats) E Marking PED 97 / 23 / E Special tests - X-ray (RT) - iquid penetrant (PT) - Positive Material Identification (PMI) 2

3 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) 2-SETS (-PORT) N11, N12, FU ORE / N21, N22 REDUED ORE W H H1 Ød SME lass 150 / JIS 10K Dimensions - N11 ND N21 Full bore - N11 Reduced bore - N21 NPS Ød H W H1 Ød Ødo H W H1 1 1/ / SME lass / JIS 20K Dimensions - N12 ND N22 Full bore - N12 Reduced bore - N22 NPS Ød H W H1 Ød Ødo H W H1 1 1/ / Note: Ødo = bore opening diameter on reduced bore valves 3

4 8,14 9 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) 11 12,13 4-SETS ( ND T-PORT) M11, M12 FU ORE / M21, M22 REDUED ORE ,21, , , H H1 Stem detail , , Note: The illustration shows body construction of 3-way ball valve, Model M11 in NPS 3 1 Parts ist No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Stem 316 S/S or 304 S/S 5 Seat E-seat as standard (G-seat an option) 6 Gasket PTFE 7 Thrust washer 316 S/S 8 Gland bolt 193 (G) 8 9 Gland flange F8 10 Gland packing PTFE 11 Snap ring 304 S/S 12 Stud 193 (G) 8 or 193 (G) 7 13 Nut 194 (G) 8 or 194 (G) 2H 14 ive loading spring 304 S/S 15 nti-static spring 316 S/S 16 nti-static spring 316 S/S 17 Gland bearing PTFE 18 Thrust bearing PTFE 19 Shaft bearing R-PTFE 20 Washer 304 S/S 21 Spring washer 304 S/S 22 olt 304 S/S 23 Snap ring 304 S/S 24 Stopper 304 S/S 25 Handle head arbon steel 26 Handle/pipe arbon steel 27 Indicator 304 S/S 15, , Options NE MR E Marking PED 97 / 23 / E Special tests - X-ray (RT) - iquid penetrant (PT) - Positive Material Identification (PMI) Note: Please consult us for 4 seats SME lass valves (M12 and M22) 4

5 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) 4 - seats ( and T - port) M11 Full bore / M21 Reduced bore W H H1 Ød 1 SME lass 150 / JIS 10K Dimensions - M11 ND M21 Full bore - M11 Reduced bore - M21 NPS Ød 1 H W H1 Ød Ødo 1 H W H1 1/ / / / Note: Ødo = bore opening diameter on reduced bore valves Please consult us for 4 seats SME lass valves (M12 and M22) 5

6 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) PRESSURE-TEMPERTURE RTINGs NPS 1/2, 3/4 lass lass Temperature F EGEND: Dashed lines indicate body ratings. W F8M F8 4-seats - Upper limit 302 F NOTE: E seat is PTFE/PF copolymer seat Seat ratings for Gratite seated valves are identical to SME body ratings Please consult us for 4 seats SME lass valves (M12 and M22) 0 NPS 1-2 1/2 for Full bore NPS 3 For Reduced bore NPS 3, 4 for Full bore NPS 4, 5 For Reduced bore lass 700 lass lass 150 lass Temperature F 0 0 Temperature F 0 NPS 5, 6 for Full bore NPS 6, 8 For Reduced bore NPS 8 for Full bore NPS 10 for Reduced bore lass 700 lass 0 lass 150 lass Temperature F Temperature F 6

7 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) OPERTION FORM -PORT (N11, N12, N21, N22 ND M11, M21),, indicate the three supply ports. Quarter turn and -port construction allow for the following two flow patterns. (Pattern 1 and Pattern 2) Pattern 1 and Pattern 2 are standard flow directions for -port valve. rrows indicate pressure higher than 0 MPa. For vacuum use please inquire separately. Straight flow from to and to is not possible. (The operation rotates 90.) rossed out forms cannot be used. eakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Pattern 1 Pattern 3 Pattern 2 NOTES: 1. s for 2-seats (N), Shut-off function is not available at the center port () because the seat is not installed there. Please pay attention to the direction of the flow channel when using it. In Pattern 3, the fluid pass through both flow channel to and to. 2. Please consult us for 4-seats SME lass and JIS 20K valves (M12/M22) OPERTION FORM T-PORT (M11, M21),, indicate the three supply ports. T-port available for below four patterns. Pattern 1 and Pattern 2 are standard flow directions for a 4-seat (T-port) valve. rrows indicate pressure higher than 0 MPa. For vacuum use please inquire separately. rossed out forms cannot be used. eakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. NOTE: Please consult us for 4-seats SME lass and JIS 20K valves (M12/M22) Pattern 1 Pattern 2 Pattern 3 Pattern 4 7

8 KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) Selection guide Example N E T S Valve code Description N11 Full bore, NPS 1 1/2 - NPS 8 N12 Full bore, NPS 1 1/2 - NPS 8 N21 Reduced bore, NPS 5 - NPS 10 N22 Reduced bore, NPS 5 - NPS 10 M11 Full bore, NPS 1/2 - NPS 8 M12 Full bore, NPS 1/2 - NPS 8 M21 Reduced bore, NPS 5 - NPS 8 M22 Reduced bore, NPS 5 - NPS 8 ody code Description S/S F S/S F8M 62 W Special feature Description -port T T-port [For 4-seats only] all & shaft code * Description S/S -F S/S - F8M all coating -- Seat material Description E PTFE-PF copolymer G Reinforced PTFE (carbon fiber reinforce) F Hard graphite Shaft packing Description T PTFE U GRFOI G Reinforced PTFE Pressure class Description 15 SME SME Manual operator Description ever handle G Worm gear operator W Oval handwheel onnection Description -- Raised face standard (specify for all others) Special Description S Special - give complete detail NoteS: * When the shaft material is different from the ball material. Use the code numbers to define the required materials. Example: 32/31 all = F8M Shaft = F8 Please consult us for 4 seats SME lass valves (M12 and M22) 2017 Emerson. ll rights reserved. 8

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive

More information

KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment

More information

KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids

KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of

More information

A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping

A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced

More information

KTM Jacketed Ball Valves Full bore and Reduced bore

KTM Jacketed Ball Valves Full bore and Reduced bore KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy

More information

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES OMNI-II, a new generation of ball valves with OW-E fugitive emission certification, cavity relieving seats and ease of automation FEATURES GENERA APPICATIONS Chemical, petrochemical, pulp and paper, reactive

More information

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES

KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES A new generation of ball valves with fugitive emission control and ISO mounting pad FEATURES GENERAL APPLICATIONS Pulp and paper, reactive monomers, oil and gas production, steam, hot gases, toxic and

More information

KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE

KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE A rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers FEATURES GENERAL APPLICATION Steam, liquids, gas or critical services

More information

Order code information

Order code information 3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal

More information

G Series Investment Cast Stainless Steel Ball Valves

G Series Investment Cast Stainless Steel Ball Valves G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE

More information

Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration

Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration * ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications

More information

Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500

Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500 Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View

More information

KTM. Enhanced, proven design offers both control and block valve functions

KTM. Enhanced, proven design offers both control and block valve functions KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)

More information

General applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas

General applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas KTM Gratite Seat i-temp Ball Valves KTM KTM s Gratite seat ball valve not only operates across an impressive range of temperatures, from -29 C to 500 C, it also boasts outstanding performance and a reliability,

More information

VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION

VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations

More information

AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.

AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd. N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD

More information

Two-Way Soft Seated Ball Valve Type 75-S

Two-Way Soft Seated Ball Valve Type 75-S Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,

More information

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES

More information

Durco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4)

Durco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4) P R E S E N T I N G T H E N E W urco Microfinish all Valve F O R H E M I A L S E R V I E S The est Standard Stem Seal In The Industry ulletin VM-6e (A4) (VM-6e) Microfinish all Valve 8/2/2 7:35 AM Page

More information

Model SCV (Angle Body)

Model SCV (Angle Body) Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and

More information

SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves

SPIRA-TROL. ½ to 4 ASME (ANSI) Two-port KEA, KFA and KLA Control Valves Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves

More information

CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1

CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1 Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1

More information

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600 The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and

More information

Two-Way Metal Seated Ball Valve Type 75-M

Two-Way Metal Seated Ball Valve Type 75-M Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO

More information

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661) 3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company

More information

3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections

3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek

More information

3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.

3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2 - 6 Stainless or Carbon Steel. L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating

More information

Two-Way Metal Seated Ball Valve Type 85-M

Two-Way Metal Seated Ball Valve Type 85-M Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards

More information

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.

More information

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:

More information

Sempell High Pressure Stop Valves Model VA500 (ASME)

Sempell High Pressure Stop Valves Model VA500 (ASME) 7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

BALL VALVE SERIES Electric actuator - El-O-matic

BALL VALVE SERIES Electric actuator - El-O-matic BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0

More information

Two-Way Soft Seated Ball Valve Type 14-S

Two-Way Soft Seated Ball Valve Type 14-S Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

Cv Values L & T-PORT 90 T-PORT STRAIGHT THRU

Cv Values L & T-PORT 90 T-PORT STRAIGHT THRU This 3-way ball valve offers diverting and mixing flow patterns, often eliminating the need for two valves. The full port design is easily automated and is available with various seat materials. The bolts

More information

Keystone WINN Hi-Seal High Performance Butterfly Valve

Keystone WINN Hi-Seal High Performance Butterfly Valve m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive

More information

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180 SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body

More information

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through

More information

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE

More information

NAF-Triball ball valve

NAF-Triball ball valve NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application

More information

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these

More information

Two-Way Metal Seated Ball Valve Type 16-R

Two-Way Metal Seated Ball Valve Type 16-R Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards

More information

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve - Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing

More information

Series 110 Globe Control Valves

Series 110 Globe Control Valves Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball

More information

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

More information

FLANGED BALL VALVES ASME CLASS 150 & 300

FLANGED BALL VALVES ASME CLASS 150 & 300 FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety

More information

General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS

General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT

More information

FLOATING BALL VALVE CATALOG

FLOATING BALL VALVE CATALOG FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11

More information

D I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV

D I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more

More information

B1F. B Series Forged Brass Ball Valves 5.1

B1F. B Series Forged Brass Ball Valves 5.1 ** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged

More information

BALL SECTOR VALVE of stainless steel 455 (459) series

BALL SECTOR VALVE of stainless steel 455 (459) series Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and

More information

Three-Way Metal Seated Ball Valve Type 21-M

Three-Way Metal Seated Ball Valve Type 21-M Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

Ball valve are designed, constructed and tested according to API-6D standards.

Ball valve are designed, constructed and tested according to API-6D standards. A VAVE DESIGN AND TEST all valve are designed, constructed and tested according to APID standards. DOUE OCK AND EED All trunnion mounted type ball valve employ a sealing principle that facilitates all

More information

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211

More information

Materials : Forged carbon steel or stainless steel

Materials : Forged carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire

More information

Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d

Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves

More information

9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal

More information

Double Offset Butterfly Valve

Double Offset Butterfly Valve General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire

More information

Sempell High Pressure Stop Valves Model VA510 (DIN)

Sempell High Pressure Stop Valves Model VA510 (DIN) Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with

More information

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1 Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled

More information

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting

More information

NELES TRUNNION MOUNTED BALL VALVE SERIES D

NELES TRUNNION MOUNTED BALL VALVE SERIES D NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience

More information

Item 513F. 3/4 Way High Pressure Ball Valve ASME600, 900 & 1500 SIZE: 1/2"-2"

Item 513F. 3/4 Way High Pressure Ball Valve ASME600, 900 & 1500 SIZE: 1/2-2 Item 53F 3/ Way High Pressure Ball Valve ASME600, 900 & 0 : /"" ZIPSON'S 53F, 3600 psi, 3/ way high performance flanged ball valve was designed for the high pressure industrial pipe line. With T//X/Iport

More information

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under

More information

Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals

Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe

More information

NAF-Duball ball valves

NAF-Duball ball valves NAF-Duball ball valves 25-400, Size 1-16 PN 10-40, ANSI Class 150-300 Fk 41.61(22)GB 07.12 Primary characteristics NAF-Duball is a full-bore ball valve which, due to its design and combination of materials,

More information

WKM Valves Triple Offset Valves

WKM Valves Triple Offset Valves WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets ontents Triple offset geometry.......................................... 3 Major markets...................................................

More information

GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150

GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150 CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane

More information

R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition

R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,

More information

Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves

Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00

More information

BALL VALVE SERIES Pneumatic actuator - Actreg

BALL VALVE SERIES Pneumatic actuator - Actreg FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

Product Guide MAS CA 08/05

Product Guide MAS CA 08/05 Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder

More information

NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class

NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(2)GB 11.02 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating

More information

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001 Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial

More information

Val-Matic QuadroSphere Trunnion Mounted Ball Valve

Val-Matic QuadroSphere Trunnion Mounted Ball Valve Manual No. QS-OM1-1 Val-Matic QuadroSphere Trunnion Mounted Ball Valve Operation, Maintenance and Installation Manual INTRODUCTION... 2 RECEIVING AND STORAGE... 2 INSTALLATION... 2 DESCRIPTION OF OPERATION...

More information

NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class

NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating

More information

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout

More information

BALL SECTOR VALVE of stainless steel 455 (459) series

BALL SECTOR VALVE of stainless steel 455 (459) series Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and

More information

3L/T-2P/Q33 Series 3 Way Ball Valves

3L/T-2P/Q33 Series 3 Way Ball Valves 3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying

More information

VALVE WITH UV ELECTRIC ACTUATOR

VALVE WITH UV ELECTRIC ACTUATOR 762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

Engineered Valves For Pipeline Service Application

Engineered Valves For Pipeline Service Application Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

Bushing Viton O-ring (Other material available) Anti-Static Device

Bushing Viton O-ring (Other material available) Anti-Static Device API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by

More information

Body Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure

More information

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve

Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API

More information

F20 Series Ball Valve Index

F20 Series Ball Valve Index F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For

More information

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300. n x Øs Ø P. N h. 4x900=360 0 Ø 5 Ø P BALL VALVES

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300. n x Øs Ø P. N h. 4x900=360 0 Ø 5 Ø P BALL VALVES H Ø T Ø R Ø 5 2 DN-300 (12 ) to DN-400 (16 lass-150 & 300 DN-150 (6 ) to DN-300 Ø X Y Ø P M n x Øs N h 4x900=360 0 Ø 5 Ø P R3 nx x ØS ØS ØS A VAVES ØP ØP ØR ØR ØT R 1 V NDEX 2 VAVES The company 5 GENERA

More information

VALVE WITH UV ACTUATOR

VALVE WITH UV ACTUATOR CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves

More information

NAF-Triball ball valve DN for max. 40bar. Fk (9)GB 03.03

NAF-Triball ball valve DN for max. 40bar. Fk (9)GB 03.03 NAF-Triball ball valve - 0 for max. bar Fk.6(9)GB 03.03 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application for the metal

More information

Worcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202

Worcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202 Worcester 3/4 Series Reduced Bore Flanged Ball Valves to DIN 3202 General Description Since its introduction to industry, the Series 3/4 ball valve has become a major force in the world of fluid control.

More information

Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4

Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4 FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models

More information