Type 695. , Sizes 1/2-2

Size: px

Start display at page:

Download "Type 695. , Sizes 1/2-2"

Clinton Lane
5 years ago
Views:

1 escription The type 695 is a compact valve with many features which make it ideal for pharmaceutical and bioprocessing applications. Sanitary iaphragm Valve Pneumatically operated Standard Features, Compact design, Sanitary internals, FA compliant diaphragms 6L stainless steel body Triclamp, O.. Tubing, ISO, and IN end connections, s / Available Options, Handwheel, manual override Electrical limit and proximity switches Visual position indicator Pneumatic and electropneumatic positioners Stoke limiters Special connections Hose barb, tube extensions, Swagelok, Cajon VCR, Ingold, and others available upon request. Fabrications Cluster valve assemblies for both horizontal and vertical orientations, and custom fabrications upon request. Materials AL6XN, Hastelloy, Titanium, and others available upon request. Typical Applications, Pharmaceutical manufacturing, Bioprocessing, Cosmetic, Brewery Service, Food and Beverage, Semiconductor, High Purity Chemicals Type

2 Type 695 Technical ata Max permissible working temperature: 76 F (depending on diaphragm and body materials). The valve will seal against flow in either direction up to full working pressure. Control Medium Min. Required control pressure: 45 psi Max. Permissible control pressure: 90 psi Max. Permissible temp. of control medium: 04 F Actuator volume: / 9. cubic inches /4 /.4 cubic inches 67. cubic inches Body Configuration iaphragm material way valve body way angled valve body E nd generation, modified Teflon with Ethylenepropylene backing piece molded closed TFM/EPM 5E Connection IN IN 8/Series IN 8/Series IN 8/Series Butt weld O.. Tubing s /4/8 0 gauge.05 wall s / 6 gauge.065 wall s 4 4 gauge.08 wall ISO Schedule 0 pipe Triclamp O.. Tubing by Triclamp Extended O.. Tubing Extended O.. Tubing by Triclamp Body material Investment cast body Stainless steel 6 L.445 (BN) Fe 0.5% Stainless steel.459 (UNS N 08904) Forged Body Stainless steel 6 L.445 (ASTM A 8) Stainless steel 6 L.445 (BN) Fe 0.5% Machined block Stainless steel 6 L.445 (ASTM A 479) Special versions (Consult factory for special material reference numbers) nd generation, modified Teflon with Silicone backing piece molded closed Ethylenepropylene Rubber for saturated steam max F Ethylenepropylene Rubber for saturated steam max F nd generation, modified Teflon with Ethyleneproplylene backing (piece) nd generation, modified Teflon with Ethyleneproplylene backing Control function Normally closed Normally open ouble acting Surface finish Special Versions Special versions TFM/VMQ EPM EPM TFM/EPM TFM/EPM All diaphragms listed conform to the FA code of Federal Regulations paragraph 77.0 of section. BPE Surface Ra Average [Note ()] Ra Max µin. esignation µin. µm µin. µm Mechanical 5 Mechanical SFV Epol SFV Mechanical SFV Epol SFV Mechanical SFV Epol SFV GENERAL NOTE: All Ra readings are taken across the grain. NOTE: () The average Ra is derived from two readings taken at different locations. 5S UXXXX Order Example Type of valve 695 N Body configuration Connection (valve body) Body material iaphragm material Control function Actuator size Locking device Pipe main size Pipe main connection Surface finish Special versions (XXXX) AN CONTROL SYSTEMS 800 Camp Creek Parkway Building 0, Suite 0 Atlanta, GA Phone (4) Fax (4) 449 info@gemu.com 57

3 Control Pressure (psi) Control Pressure (psi) Type 695 Technical ata Control function Control function Control function (In.) (mm) Body Configuration = straight through Working pressure (psi) Working pressure (psi) Working pressure (psi) EPM, EPM, EPM, Viton, Silicon Teflon Viton, Silicon Teflon Viton, Silicon Teflon Cvvalue (gpm) ISO Connections O.. Tubing Weight (lbs) / /4 /4 / All pressures are gauge pressures when applied upstream. The C v values vary due to differences in valve construction (i.e., Port size, body material, diaphragm material, etc.) Control function (/ ) Control function + (/ ) Given control pressures apply to max. Stroke of valve. Values are lower for lower strokes. 5 The values shown relate to control function (with lifting spring). For control function (without lifting spring) control pressure is approx. bar lower Operating Pressure (psi) Operating Pressure (psi) AN CONTROL SYSTEMS 800 Camp Creek Parkway Building 0, Suite 0 Atlanta, GA Phone (4) Fax (4) 449 info@gemu.com 07

4 Type 695 imensional ata Take Out imensions for Standard Connections Con. Ref. No. (59) (80) (94) (9) (95) N Units Ød s L L L L4 L5 / 5 mm in /4 0 mm in mm in / mm in mm in L = Connection Code 59 = Standard buttweld L = Connection Code 80 = Standard clamp L = Connection Code 94 = Standard buttweld extension (AWF) L4 = Connection Code 9 = Standard clamp X buttweld L5 = Connection Code 95 = Standard clamp X buttweld extension (AWF) rain Angles N egrees / 5 46 / /4 65 / rain angles are for BS O.. Tubing only. Optional Spigot imensions Connection Ref. No. / /4 /4 / N L , 6,9,7 4,4 48,, d s d s d s d s d s d,6,6,0,0,0, 8,5 8,5 8,5 8 4,5 4,5 5, ,5,5,5,5,5, ,0,7 8,0 5,0 s,,,, imensions CF CF, N Units A A F G ØB / 5 mm G/4 5.0 in /4 0 mm G/4 5.0 in mm G/4 5.0 in /4 mm G/ in / mm G/ in mm G/4 0.0 in AN CONTROL SYSTEMS 800 Camp Creek Parkway Building 0, Suite 0 Atlanta, GA Phone (4) Fax (4) 449 info@gemu.com

5 Type 695 Spare Parts ITEM PART Valve Body iaphragm Compressor Quadring Membrane Plate Actuator ome SocketHead Bolt Membrane Spindle Actuator Base SocketHead Bolt Locking Nut Cap Cap Pin Stem AN CONTROL SYSTEMS 800 Camp Creek Parkway Building 0, Suite 0 Atlanta, GA Phone (4) Fax (4) 449 info@gemu.com 09

Type 625. , Maintenance-free piston actuator: Normally Open, Normally. , FDA compliant diaphragms. , Sizes 3/8-3/4

Type 625. , Maintenance-free piston actuator: Normally Open, Normally. , FDA compliant diaphragms. , Sizes 3/8-3/4 escription The type 65 is an extremely compact pneumatically actuated valve with many features which make them ideal for pharmaceutical and bio-processg applications. Sanitary iaphragm Valve Pneumatically