Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50

Transcription

1 Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications in pharmaceutic and food industry. Perfect cleanability by optimised flow condition in relation to constand high wall shear stress EHEG certified easy to clean design for aseptic applications Body made from non-porous barstock material Medium is sealed by the diaphragm Solid design of the diaphragm for extreme variations in temperature Highest chemical restistance by a PTFE-coated diaphragm Simple and clever design Customer-friendly maintenance Used parts are FA conformity and comply with the USP class VI, 1935/2004 and 10/2011 Control valve with positioner type 8049 Integrated digital positioner type 8049 Internal stroke feedback Optical position indicator bonnet Shut-off valve Exterior lip sealing Valve stem Stem guiding iaphragm Barstock body Plug of PEEK Schubert & Salzer Control Systems GmbH, Bunsenstr. 38, Ingolstadt, Tel: +49 (0) , Fax: +49 (0) info.cs@schubert-salzer.com,

2 with EHEG-Certification Technical information valve Body material Nominal sizes Connections Nominal pressure iaphragm Fluid temperature Rangeability Materials Valve body Stainless steel Stainless steel (optional: polished) iaphragm actuator Stainless steel springs Stainless steel Valve stem Stainless steel Control plug PEEK Clamp-connection Stainless steel Body positioner Aluminium, filled PA, optional: stainless steel Body position indicator PA Polyamid (clear) Positioner For technical information of our positioners, type 8049 or 8047, refer to the corresponding data sheets. Kvs Values with EHEG Certification Stainless steel up to 50 Welding ends IN series 2 Welding ends ASME BPE Welding ends ISO 1127 Tri-clamp acc. Inch (IN C) PN 16 Reinforced EPM diaphragm with PTFE-foil (fluidside) -20 C up to +140 C 50 : 1 < 0,5 % Hysteresis Surface finish Inside Ra < 0,6 µm electropolished, Ra < 0,4 µm (optional for body) electropolished, Ra < 0,25 µm (optional for body) Outside Ra < 1,2 µm characteristic linear equal percentage % 3,5 3,5 8,8 21,9 35 2,6 2,6 6,8 14,5 24,5 reduced (63 %) 2,2 2,2 5,5 14-1,6 1,6 4,4 9,9 - reduced (40 %) 1,4 1,4 3,5 8,8-1,1 1,1 2,6 - - reduced (25 %) 0,88 0,88 2, ,6 - - reduced (16 %) 0,55 0,55 1, ,1 - - reduced (10 %) 0,35 0,35 0, reduced (6,3 %) 0,22-0, reduced (4 %) - - 0, reduced (2,5 %) 0,09 0, stroke (mm) Kvs Values without EHEG Certification characteristic linear equal percentage % reduced (63 %) 2,5 2,5 6,3 16-2,5 2,5 6, reduced (40 %) 1,6 1, ,6 1, reduced (25 %) 1 1 2, ,5 - - reduced (16 %) 0,63 0,63 1, ,6 - - reduced (10 %) 0,4 0, reduced (6,3 %) 0,25-0, reduced (4 %) - - 0, reduced (2,5 %) 0,1 0, stroke (mm)

3 with EHEG-Certification Admissible differential pressures for control valves with positioner type 8049 Max. admissible Supply Springs Max. admissible diff. pressure in bar bar size back pressure in bar ,5 to 6 80 mm 2 4, ,2 to mm 3 8, ,5 to 6 80 mm 2 4, ,2 to mm 3 8, ,5 to 6 80 mm 2 4,5 25 8,5 3,2 to mm 3 8, ,6 to mm ,5 3,2 to mm 3 8, ,3 to mm ,2 to mm 3 8,5 50 7,5 2,3 to mm 6 11 Admissible differential pressures for shut-off valves (spring to close*) Max. admissible Supply Springs Max. admissible diff. pressure in bar bar size back pressure in bar 15 to ,5 to mm 2 4,5 15 to ,2 to mm 3 8, ,2 to mm 3 8, ,3 to mm ,5 3,2 to mm 3 8, ,3 to mm 6 11 *Pressure values for spring to open on demand Ordering number system / V S 1-6 : Please note all 6 sections. 7-12: Quote only if required. Symbol: "V": Valve Type Size "R": Repair kit (sealings) 1. esign 2. Connections 3. Body material 4. Control plug-/ iaphragmmaterial 5. Positioner 6. A Aseptic Welding ends 7 stainless steel E Control plug of PEEK - without (stut-off valve) 1 piston Ø 80mm control acc. IN11850, Ra <0,6 µm Ra < 0,6 µm 6 p/p-positioner type 8047 with stainless valve with series 2 9 stainless steel diaphragm of EPM 8 i/p-positioner type 8047 steel bonnet EHEG- E Welding ends surface roughness with PTFE-foil (fluidside) C digital positioner 2 piston Ø 125mm Certification acc. ASME BPE inside Ra <0,4 µm Ra < 0,6 µm type 8049, 4-wire with stainless B Aseptic F Welding ends electropolished R digital positioner steel bonnet control acc. ISO 1127 A stainless steel type 8049, 2-wire M piston Ø 80mm valve without Z Tri-clamp acc. surface roughness W digital positioner with plastic EHEG- Inch (IN C) inside Ra <0,25 µm type 8049, 2-wire, bonnet Certification electropolished ex-version C diaphragm A Special version 8. Springs 9. Flow characteristic 10. Kvs-value 11. Accessories 12. Special versions M see - Standard spring - linear - full (100%) S without S in case further following configuration 1 equal 1 red. 40% 1 1 limit switch specials are positions 1 Spring opens percentage 2 red. 25% (micro switch) required (for digital positioner 3 red. 16% 2 2 limit switches B digital position or shut-off valve) 4 red. 10% (micro switch) indicator with R 4 springs 5 red. 6,3% K 1 limit switch bluetooth W 8 springs 6 red. 4% compact C digital position 7 red. 2,5% M 2 inductive limit switches indicator A red. 63% P 1 inductive limit switch AS-I control head M el. Position indicator with cable bushing N el. Position indicator with plug connetion - 3 -

4 with integrated digital positioner type 8049 I H , ,5 53,5 1,6 21,3 46,5 53 1,65 12,7 46,5 61, , ,5 53,5 1,6 26,9 46,5 53 1,65 19,05 46,5 53, , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,65 50, , , ,65 50, ,7 Tri-clamp ASME BPE I H , ,5 85, , , ,4 50,5 75,2 79, ,4 50,5 75,2 79, ,1 50, ,1 50, , ,9 88, , ,9 88, ,2 9,9 8 10,7 8,2 11,3 imensions in mm - 4 -

5 with integrated digital positioner type 8049 H , ,5 53,5 1,6 21,3 46,5 53 1,65 12,7 46,5 61, , , ,5 53,5 1,6 26,9 46,5 53 1,65 19,05 46,5 53, , , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,65 50, ,7 Tri-Clamp ASME BPE H , ,5 85, , , ,4 50,5 75,2 79, ,1 50, , ,9 88, ,5 15, ,5 16,7 imensions in mm - 5 -

6 shut-off valve with piston actuator I H E , ,5 53,5 1,6 21,3 46,5 53 1,65 12,7 46,5 61, , , ,5 53,5 1,6 26,9 46,5 53 1,65 19,05 46,5 53, , , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,65 50, , , , ,65 50, ,5 Tri-Clamp ASME BPE I H E , ,5 85, , , ,4 50,5 75,2 79, ,4 50,5 75,2 79, ,1 50, ,1 50, , ,9 88, , ,9 88, ,8 5,8 6 8,7 6,8 9,5 7 10,2 imensions in mm - 6 -

7 Text and pictures are not binding. We reserve the right, to alter the equipment. shut-off valve with diaphragm actuator E , ,5 53,5 1,6 21,3 46,5 53 1,65 12,7 46,5 61, , , ,5 53,5 1,6 26,9 46,5 53 1,65 19,05 46,5 53, , , ,5 53,5 2 33,7 46,5 53 1,65 25,4 46,5 53, , , , ,3 49,5 47 1,65 38,1 49,5 54, , , , ,65 50, ,5 Tri-Clamp ASME BPE E , ,5 85, , , ,4 50,5 75,2 79, ,1 50, , ,9 88,9 435 ata sheet 6051e/Version: ,3 14,5 14,8 15,3 15,5 imensions in mm - 7 -