High Purity PVDF/PP Valves and Flowmeters

Size: px
Start display at page:

Download "High Purity PVDF/PP Valves and Flowmeters"

Transcription

1 High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS

2 Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry leader in the production of high purity valves, actuators and control systems. Our dedication to quality has earned us many loyal customers in the semiconductor industry. Our High Purity products are developed and produced specifically for use in process equipment, ultra Source: Infineon pure water and chemical manufacturing and distribution systems, for microchip production. They are produced today under the strictest cleanroom conditions at our manufacturing site in Switzerland. 2

3 We develop, produce and supply: CleanStar PFA-HP valves, control systems and accessories FlareStar PFA-HP fittings and accessories The pureplus valve range is the result of close cooperation with designers, equipment manufacturers and end users / chip manufacturers in the semiconductor industry. HydraLine PFA-HP pressure measurement devices and transmitters, specifically designed for ultra high purity chemicals TubeStar PFA-HP tubing pureplus A product range including PVDF-HP and PP-HP diaphragm valves as well as PVDF-HP flowmeters We offer a complete High Purity PFA, PVDF and PP range of components for critical fluid management and control, that sets new standards. pureplus, the PVDF-HP and PP-HP valve range, provides advanced proven technical design to meet the challenges of your requirements. 3

4 Product overview 1 Technical information 2 Diaphragm valves 6 Nominal size 7 PVDF-HP valves 3 GEMÜ 617 manually operated 8 9 GEMÜ 677 manually operated GEMÜ 610 pneumatically operated GEMÜ 600 pneumatically operated GEMÜ 690 pneumatically operated GEMÜ 677 manually operated, T-valve GEMÜ 690 pneumatically operated, T-valve PP-HP valves 4 Flowmeters GEMÜ 677 manually operated GEMÜ 690 pneumatically operated GEMÜ 883, 833, 834 / PVDF float, O-Ring FPM , 823, 824 with/without magnet 4 Contents

5 5 Accessories GEMÜ 1041 Mounting plates for GEMÜ 600, 677, GEMÜ 1300 Optical position indicator for GEMÜ GEMÜ 1114 Stroke limiter for GEMÜ GEMÜ FLAD Flare-Adapter, for transition from PVDF-HP 43 to PFA tube GEMÜ 1230/1201 Electrical position indicators 43 with microswitches for GEMÜ 600, 610, 690 GEMÜ 1231/1211 Electrical position indicators ATEX 44 with 2-wire Namur proximity switches for GEMÜ 600, 610, 690 GEMÜ 1232/1214 Electrical position indicators 45 with 3-wire proximity switches for GEMÜ 600, 610, 690 GEMÜ 1234 Electrical position indicator, 46 intelligent programming for GEMÜ 610 GEMÜ 1235 Electrical position indicator, 46 intelligent programming for GEMÜ 600, 610, 690 GEMÜ 1251/1252 Limit switches for GEMÜ flowmeters 48 (DN 25 50) GEMÜ 1256/1257 Limit switches for GEMÜ flowmeters 48 (DN ) GEMÜ Instrument sensor, 49 continuous measurement, for GEMÜ 833, 883 Contents 5

6 1 Diaphragm valves Technical information High Purity diaphragm valves have been specifically developed for ultra high purity water treatment and distribution plants as well as for process equipment for microchip production. All valves can be welded using common IR butt-welding machines. In addition, all PVDF-HP diaphragm valves up to d 63/DN 50 can also be welded with WNF/BCF welding machines. Product features Minimal contamination Use of High Purity materials Minimal dead legs Compact design Optional mounting position and flow direction Good Cv values Low maintenance actuators, long service life Extensive range of accessories Manufactured in class 100 clean room Flow characteristics Information about the control behavior of diaphragm valves is shown in the flow characteristic curve: Flow rate in % Pressure differential 1.0 bar Valve stroke in % There is a nearly linear flow increase in the range from 5 65% valve stroke. Only a slight flow increase is achieved above 80% stroke. Application limits The maximum working temperature for diaphragm valves and flowmeters is 90 C/194 F. Pressure/Temperature diagram Pressure rating PN 6: Working pressure Pressure rating PN 10: Working pressure Temperature Temperature 6 Technical information

7 Nominal size 1 Flow capability in relation to nominal size Flow/Pressure differential curve Flow/Pressure differential curve (DN 15 40) (DN ) DN 40, Cv DN 100, Cv DN 32, Cv DN 80, Cv 140 Flow (gal/min) DN 25, Cv 12.3 DN 20, Cv 9.6 DN 15, Cv 6.5 Flow (gal/min) DN 65, Cv 91 DN 50, Cv Pressure differential (psi) Pressure differential (psi) Coordination of sizes (mm) Conversion factor Nominal diam. (DN) Pipe (d) Size Kv (l/min) = Cv (gal/min) x mm inch mm inch inch Cv (gal/min) = Kv (l/min) x ½ ¾ ¼ ½ Spare parts ½ Spare parts such as complete actuators and diaphragms are available upon request. Technical information 7

8 2 617 PVDF-HP valves 2/2 way diaphragm valve, manually operated, d 20 / DN 15 PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Valve body with butt weld spigots (BCF) White bonnet D28205A0 M HPW 1/2 Black bonnet D28205A0 M HP 1/2 Valve body with union ends and IR inserts White bonnet D78205A0 M HPW 1/2 Black bonnet D78205A0 M HP 1/2 Product features Stable, integrated mounting plate Max. working pressure: 90 psi (6 bar) Optical position indicator as standard Bonnet and handwheel in PVDF Also available with union ends for easy installation and removal. Dimensions Valve body with butt weld spigots (BCF) (inch) 8 PVDF-HP valves

9 617 2 Dimensions Valve bonnet and body mounting (inch) * * * Mounting holes 2 x M5, hole distance 1.38" * Mounting dimensions for use with mounting plate GEMÜ 1041 Dimensions Valve body with union ends and IR inserts (inch) PVDF-HP valves Inhalt 9

10 /2 way diaphragm valve, manually operated d / DN PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch White bonnet D28205E0 HPW ½ D28205E0 HPW ¾ D28205E0 HPW D28205E0 HPW 1¼ D28205E0 HPW 1½ D28205E0 HPW 2 Black bonnet D28205E0 HP ½ D28205E0 HP ¾ D28205E0 HP D28205E0 HP 1¼ D28205E0 HP 1½ D28205E0 HP D HP 2½ D HP D HP 4 Product features Optical position indicator as standard Lockable handwheel clamp option Electrical position indication (open) optional 10 PVDF-HP valves

11 677 2 Handwheel with locking device d DN PN Weight Cv Order code Size mm psi lbs gpm inch White bonnet D28205EL HPW ½ D28205EL HPW ¾ D28205EL HPW D28205EL HPW 1¼ D28205EL HPW 1½ D28205EL HPW 2 Black bonnet D28205EL HP ½ D28205EL HP ¾ D28205EL HP D28205EL HP 1¼ D28205EL HP 1½ D28205EL HP D202052L HP 2½ D202052L HP D202052L HP 4 PVDF-HP valves 11

12 2 677 Dimensions Bonnet (inch) DN Ø B A A Dimensions Valve body DN (inch) DN L H H1 Ø d c c1 s Dimensions Valve body DN (inch) DN L H H1 Ø d c s PVDF-HP valves

13 677 2 Dimensions Body mounting DN (inch) DN M f 15 M M M M M M M M Dimensions Body mounting DN 100 (inch) DN M f 100 M /2.36 PVDF-HP valves 13

14 /2 way diaphragm valve, pneumatically operated d 20 / DN 15 PVDF-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Valve body with butt weld spigots (BCF) White actuator D28205A1 M HPW ½ Black actuator D M HP ½ Valve body with union ends and IR inserts White actuator D78205A1 M HPW ½ Black actuator D M HP ½ Technical data is valid for control function 1 (normally closed) Control pressure: psi (5 7 bar), max. working pressure: 90 psi (6 bar) Control function 2 (normally open) Product features Stable, integrated mounting plate Optical position indicator as standard Stroke limiter and electrical position indicator available as accessories Also available with union ends for easy installation and removal and 3 (double acting) upon request Dimensions Valve body with butt weld spigots (BCF) (inch) 14 PVDF-HP valves

15 610 2 Dimensions Actuator and body mounting (inch) Mounting holes 2 x M5, hole distance 1.38" * Mounting dimensions for use with mounting plate GEMÜ 1041 Dimensions Valve body with union ends and IR inserts (inch) PVDF-HP valves 15

16 /2 way diaphragm valve, pneumatically operated d / DN PVDF-HP / diaphragm material PTFE Product features Compact design Low maintenance piston actuator Stroke limiter, optical position indicator, minimum flow regulation and manual override as standard Connection for pilot valves acc. to Namur Control connection in-line with piping, thus installable in very restricted spaces d DN PN Weight Cv Order code Size mm psi lbs gpm inch D28205E1 HP ½ D28205E1 HP ¾ D28205E1 HP D28205E1 HP 1¼ D28205E1 HP 1½ D28205E1 HP 2 Technical data is valid for control function 1 (normally closed) Control function 2 (normally open) and 3 (double acting) upon request Control pressure: psi (4 6 bar) max. working pressure: 90 psi (6 bar) 16 PVDF-HP valves

17 600 2 Dimensions Actuator (inch) DN Ø B B1 A A1 A Dimensions Valve body DN (inch) DN L H H1 Ø d c c1 s PVDF-HP valves 17

18 /2 way diaphragm valve, pneumatically operated d / DN PVDF-HP / diaphragm material PTFE Product features Optical position indicator as standard Electrical position indication optional d DN PN Weight Cv Order code Size mm psi lbs gpm inch D28205E1 HP ½ D28205E1 HP ¾ D28205E1 HP D28205E1 HP 1¼ D28205E1 HP 1½ D28205E1 HP D HP 2½ D HP D HP 4 Technical data is valid for control function 1 (normally closed) Control function 2 (normally open) Max. working pressure: 90 psi (6 bar) (DN 15 80), 60 psi (4 bar) (DN 100) and 3 (double acting) upon request 18 PVDF-HP valves

19 690 2 Dimensions Actuator control function 1 (NC) (inch) DN Ø B A A Dimensions Actuator control function (NO and DA) (inch) DN Ø B A A1 A Control pressure [psi] Working pressure [psi] DN 65 DN 100 DN 32, 40 DN 50 DN 15, 20, 25 Measured values correspond to control function 2 (normally open). For control function 3 (double acting) control pressure values are approx. 15 psi (1 bar) lower. PVDF-HP valves 19

20 2 690 Dimensions Valve body DN (inch) DN L H H1 Ø d c c1 s Dimensions Valve body DN (inch) DN L H H1 Ø d c s PVDF-HP valves

21 690 2 Dimensions Body mounting DN (inch) DN M f 15 M M M M M M M M Dimensions Body mounting DN 100 (inch) DN M f 100 M / 2.36 PVDF-HP valves 21

22 /2 way T-diaphragm valve, manually operated d / DN PVDF-HP / diaphragm material PTFE d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch White bonnet T28205E HPW ½ - ½ T28205E HPW ¾ - ½ T28205E HPW ¾ - ¾ T28205E HPW 1 - ½ T28205E HPW 1 - ¾ T28205E HPW T28205E HPW 1¼ - ½ T28205E HPW 1¼ T28205E HPW 1¼ - 1¼ T28205E HPW 1½ - ½ T28205E HPW 1½ - ¾ T28205E HPW 1½ T28205E HPW 1½ - 1½ T28205E HPW 2 - ½ T28205E HPW 2 - ¾ T28205E HPW T28205E HPW 2-1¼ T28205E HPW 2-1½ T28205E HPW 2-2 Product features Optical position indicator as standard Lockable handwheel clamp option Injection molded T-body Minimized dead leg Saves welding time/cost T28205E HPW 2½ - 1¼ T28205E HPW 2½ T28205E HPW 3 - ½ T28205E HPW 3 - ¾ T28205E HPW T28205E HPW 3-1¼ T28205E HPW 3-1½ T28205E HPW T28205E HPW* 4 - ½ T28205E HPW* 4 - ¾ T28205E HPW* T28205E HPW 4-1¼ T28205E HPW 4-1½ T28205E HPW PVDF-HP valves

23 677 2 Handwheel with locking device d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch White bonnet T28205EL 1528 HPW ½ - ½ T28205EL 2028 HPW ¾ - ½ T28205EL 2028 HPW ¾ - ¾ T28205EL 2528 HPW 1 - ½ T28205EL 2528 HPW 1 - ¾ T28205EL 2528 HPW T28205EL 3228 HPW 1¼ - ½ T28205EL 3228 HPW 1¼ T28205EL 3228 HPW 1¼ - 1¼ T28205EL 4028 HPW 1½ - ½ T28205EL 4028 HPW 1½ - ¾ T28205EL 4028 HPW 1½ T28205EL 4028 HPW 1½ - 1½ T28205EL 5028 HPW 2 - ½ T28205EL 5028 HPW 2 - ¾ T28205EL 5028 HPW T28205EL 5028 HPW 2-1¼ T28205EL 5028 HPW 2-1½ T28205EL 5028 HPW T28205EL 6520 HPW 2½ - 1¼ T28205EL 6520 HPW 2½ T28205EL 8020 HPW 3 - ½ T28205EL 8020 HPW 3 - ¾ T28205EL 8020 HPW T28205EL 8020 HPW 3-1¼ T28205EL 8020 HPW 3-1½ T28205EL 8020 HPW T28205EL HPW* 4 - ½ T28205EL HPW* 4 - ¾ ** d1 = branch d2 = main pipe T28205EL HPW* T28205EL HPW 4-1¼ T28205EL HPW 4-1½ * Available on request T28205EL HPW 4-2 PVDF-HP valves 23

24 /2 way T-diaphragm valve, manually operated d / DN PVDF-HP / diaphragm material PTFE d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black bonnet T28205E HP ½ - ½ T28205E HP ¾ - ½ T28205E HP ¾ - ¾ T28205E HP 1 - ½ T28205E HP 1 - ¾ T28205E HP T28205E HP 1¼ - ½ T28205E HP 1¼ T28205E HP 1¼ - 1¼ T28205E HP 1½ - ½ T28205E HP 1½ - ¾ T28205E HP 1½ T28205E HP 1½ - 1½ T28205E HP 2 - ½ T28205E HP 2 - ¾ T28205E HP T28205E HP 2-1¼ T28205E HP 2-1½ Product features Optical position indicator as standard Lockable handwheel clamp option Injection molded T-body Minimized dead leg Saves welding time/cost T28205E HP T28205E HP 2½ - 1¼ T28205E HP 2½ T28205E HP 3 - ½ T28205E HP 3 - ¾ T28205E HP T28205E HP 3-1¼ T28205E HP 3-1½ T28205E HP T28205E HP* 4 - ½ T28205E HP* 4 - ¾ T28205E HP* T28205E HP 4-1¼ T28205E HP 4-1½ T28205E HP PVDF-HP valves

25 677 2 Handwheel with locking device d2 d1** DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black bonnet T28205EL 1528 HP ½ - ½ T28205EL 2028 HP ¾ - ½ T28205EL 2028 HP ¾ - ¾ T28205EL 2528 HP 1 - ½ T28205EL 2528 HP 1 - ¾ T28205EL 2528 HP T28205EL 3228 HP 1¼ - ½ T28205EL 3228 HP 1¼ T28205EL 3228 HP 1¼ - 1¼ T28205EL 4028 HP 1½ - ½ T28205EL 4028 HP 1½ - ¾ T28205EL 4028 HP 1½ T28205EL 4028 HP 1½ - 1½ T28205EL 5028 HP 2 - ½ T28205EL 5028 HP 2 - ¾ T28205EL 5028 HP T28205EL 5028 HP 2-1¼ T28205EL 5028 HP 2-1½ T28205EL 5028 HP T28205EL 6520 HP 2½ - 1¼ T28205EL 6520 HP 2½ T28205EL 8020 HP 3 - ½ T28205EL 8020 HP 3 - ¾ T28205EL 8020 HP T28205EL 8020 HP 3-1¼ T28205EL 8020 HP 3-1½ T28205EL 8020 HP T28205EL HP* 4 - ½ T28205EL HP* 4 - ¾ ** d1 = branch d2 = main pipe T28205EL HP* T28205EL HP 4-1¼ T28205EL HP 4-1½ * Available on request T28205EL HP 4-2 PVDF-HP valves 25

26 2 677 Dimensions T-valve body DN (inch) * No dimension given as from DN 65 and larger, there is no registration ring for BCF weld on the spigot. DN2 DN1 Ø d2 s2 LB LB1 LB2 T1 T2 T3 T4 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch ½ - ½ ¾ - ½ ½ ¼ - ½ ½ - ½ ½ * ½ ¾ - ¾ ¾ ½ - ¾ ¾ * ¾ ¼ ½ * ½ * ¼ - 1¼ ¼ * ½ - 1¼ * ¼ ½ - 1½ ½ * ½ * ½ * * ¼ * ½ * PVDF-HP valves

27 677 2 Dimensions T-valve body DN (inch) DN2 DN1 Ø d1 s1 L L1 L2 L4 L5 L7 L8 H H1 H2 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch inch inch inch ½ - ½ ¾ - ½ ½ ¼ - ½ ½ - ½ ½ ½ ¾ - ¾ ¾ ½ - ¾ ¾ ¾ ¼ ½ ½ ¼ - 1¼ ¼ ½ - 1¼ ¼ ½ - 1½ ½ ½ ½ ¼ ½ PVDF-HP valves 27

28 2 677 Dimensions Bonnet with handwheel (inch) DN A A1 Ø B PVDF-HP valves

29 677 2 Dimensions Diaphragm (inch) (PTFE with EPDM backing) DN L B H PVDF-HP valves 29

30 /2 way T-diaphragm valve, pneumatically operated d / DN PVDF-HP / diaphragm material PTFE d2 d1 DN2 DN1 PN Cv Order code Size mm Pipe Branch psi gpm inch Black actuator T28205E HP ½ - ½ T28205E HP ¾ - ½ T28205E HP ¾ - ¾ T28205E HP 1 - ½ T28205E HP 1 - ¾ T28205E HP T28205E HP 1¼ - ½ T28205E HP 1¼ T28205E HP 1¼ - 1¼ T28205E HP 1½ - ½ T28205E HP 1½ - ¾ T28205E HP 1½ T28205E HP 1½ - 1½ T28205E HP 2 - ½ T28205E HP 2 - ¾ T28205E HP T28205E HP 2-1¼ T28205E HP 2-1½ Product features Injection molded T-body Minimized dead leg Saves welding time/cost T28205E HP T28205E HP 2½ - 1¼ T28205E HP 2½ T28205E HP 3 - ½ T28205E HP 3 - ¾ T28205E HP T28205E HP 3-1¼ T28205E HP 3-1½ T28205E HP T28205E HP* 4 - ½ T28205E HP* 4 - ¾ T28205E HP* T28205E HP 4-1¼ T28205E HP 4-1½ T28205E HP PVDF-HP valves

31 690 2 Dimensions Actuator (inch) DN A A1 Ø B Dimensions Diaphragm (inch) (PTFE with EPDM backing) DN L B H Technical data is valid for control function 1 (normally closed) Control pressure: psi (5,5 7 bar), max. working pressure: 90 psi (6 bar) Control function 2 (normally open) and 3 (double acting) upon request * Available on request. PVDF-HP valves 31

32 2 690 Dimensions T-valve body DN (inch) * No dimension given as from DN 65 and larger, there is no registration ring for BCF weld on the spigot. DN2 DN1 Ø d2 s2 LB LB1 LB2 T1 T2 T3 T4 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch ½ - ½ ¾ - ½ ½ ¼ - ½ ½ - ½ ½ * ½ ¾ - ¾ ¾ ½ - ¾ ¾ * ¾ ¼ ½ * ½ * ¼ - 1¼ ¼ * ½ - 1¼ * ¼ ½ - 1½ ½ * ½ * ½ * * ¼ * ½ * PVDF-HP valves

33 690 2 Dimensions T-valve body DN (inch) DN2 DN1 Ø d1 s1 L L1 L2 L4 L5 L7 L8 H H1 H2 Size Pipe Branch inch inch inch inch inch inch inch inch inch inch inch inch inch ½ - ½ ¾ - ½ ½ ¼ - ½ ½ - ½ ½ ½ ¾ - ¾ ¾ ½ - ¾ ¾ ¾ ¼ ½ ½ ¼ - 1¼ ¼ ½ - 1¼ ¼ ½ - 1½ ½ ½ ½ ¼ ½ PVDF-HP valves 33

34 3 677 PP-HP valves 2/2 way diaphragm valve, manually operated d / DN PP-HP / diaphragm material PTFE d DN PN Weight Cv Order code Size mm psi lbs gpm inch Black bonnet: Body inliner PP grey / outliner PP, reinforced D20715E0 HP ½ D20715E0 HP ¾ D20715E0 HP D20715E0 HP 1¼ D20715E0 HP 1½ D20715E0 HP 2 Black bonnet: Body inliner PP natural / outliner PP, reinforced D20705E0 HP ½ D20705E0 HP ¾ D20705E0 HP D20705E0 HP 1¼ D20705E0 HP 1½ D20705E0 HP 2 Product features Optical position indicator as standard Lockable handwheel clamp option Electrical position indication (open) optional 34 PP-HP valves

35 677 3 Dimensions Bonnet (inch) DN Ø B A A Dimensions Valve body DN (inch) DN L H H1 Ø d c s Dimensions Body mounting DN (inch) DN M f 15 M M M M M M PP-HP valves 35

36 /2 way diaphragm valve, pneumatically operated d / DN PP-HP / diaphragm material PTFE Product features Electrical position indication (open) optional d DN PN Weight Cv Order code Size mm psi lbs gpm inch Black actuator: Body inliner PP grey / outliner PP, reinforced D20715E1 HP ½ D20715E1 HP ¾ D20715E1 HP D20715E1 HP 1¼ D20715E1 HP 1½ D20715E1 HP 2 Technical data is valid for control function 1 (normally closed) Control pressure: psi (5,5 7 bar) Max. working pressure: 90 psi (6 bar Control function 2 (normally open) and 3 (double acting) upon request Black actuator: Body inliner PP natural / outliner PP, reinforced D20705E1 HP ½ D20705E1 HP ¾ D20705E1 HP D20705E1 HP 1¼ D20705E1 HP 1½ D20705E1 HP 2 36 PP-HP valves

37 690 3 Dimensions Actuator control function 1 (NC) (inch) DN Ø B A A Dimensions Actuator control function (NO and DA) (inch) DN Ø B A A1 A Control pressure [psi] Steuerfunktion Working pressure [psi] DN 32, 40 DN 50 DN 15, 20, 25 Measured values correspond to control function 2 (normally open). For control function 3 (double acting) control pressure values are approx. 15 psi (1 bar) lower. PP-HP valves 37

38 3 690 Dimensions Valve body DN (inch) DN L H H1 Ø d c s Dimensions Body mounting DN (inch) DN M f 15 M M M M M M PP-HP valves

39 690 3 PP-HP valves 39

40 4 883, 833, 834 / 873, 823, 824 Flowmeters PVDF float, O-ring FPM with/without magnet d DN Meas. range PN Weight Order code Size mm gpm psi lbs inch with magnet D HP ½ D HP ¾ D HP D HP 1¼ D HP D HP D HP 2 without magnet D HP ½ D HP ¾ D HP D HP 1¼ D HP D HP D HP 2 Product features Extensive range of accessories for detection of measured values and flow rate control Dovetail sections for mounting limit switches and instrument sensors Easy installation and removal Magnet is imbedded in liquid tight PVDF float 40 Flowmeters

41 883, 833, 834 / 873, 823, Dimensions Flowmeters (inch) DN Ø D Ø d s L1 L2 L Legend Item Designation Pieces 1 Measuring tube 1 2 Float 1 3 Float stop 2 4 Union nut 2 5 Union hub 2 6 O-ring 2 7 Flow indicator 2 Flowmeters 41

42 5 1041, 1300, 1114 Accessories Flare adapter For transition from PVDF-HP to PFA tube d Tube PN e D L l Order code inch inch psi inch inch inch inch 0.78 ¼ FLAD 20D HP / FLAD 20D HP 0.78 ½ FLAD 20D HP 0.78 ¾ FLAD 20D HP 0.98 ¼ FLAD 25D HP / FLAD 25D HP 0.98 ½ FLAD 25D HP 0.98 ¾ FLAD 25D HP FLAD 25D HP 1.25 ½ FLAD 32D HP 1.25 ¾ FLAD 32D HP FLAD 32D HP 1.57 ½ FLAD 40D HP 1.57 ¾ FLAD 40D HP FLAD 40D HP Mounting plates for GEMÜ 600, 677*, 690* d DN Order code Size mm inch Z0305 1½ Z0305 HP** 1¼ - 1½ * valid for PVDF-HP valves, for PP-HP valves upon request ** HP cleaned and packaged 42 Accessories

43 1041, 1230/ Stroke limiter/ indicator for GEMÜ 690 d DN Order code Size mm inch Z1 ½ Z2 1¼ - 1½ Z3 2 Optical position indicator for GEMÜ 690 d DN Order code Size mm inch Z13 ½ Z14 1¼ - 1½ Z Z16 2½ Z17 4 Electrical position indicators with microswitches for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit Open-Closed 1230 ½ Open-Closed ½ - 4 Mounting kit for GEMÜ 1230 for GEMÜ S01Z 1201 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 43

44 5 1231/1211 Electrical position indicators ATEX with 2-wire Namur proximity switches for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit Open-Closed 1231 ½ Open-Closed ½ - 4 Mounting kit for GEMÜ 1231 for GEMÜ S01Z 1211 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. 44 Accessories

45 1232/ Electrical position indicators with 3-wire proximity switches for GEMÜ 600, 610, 690 d DN Function Type mm Position indicator without mounting kit Open-Closed 1232 ½ Open-Closed ½ - 4 Mounting kit for GEMÜ 1232 for GEMÜ S01Z 1214 S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 45

46 Electrical position indicator, intelligent programming for GEMÜ 610 d DN Function Type Size mm inch Position indicator without mounting kit Open-Closed 1234 ½ Mounting kit for GEMÜ S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. 46 Accessories

47 Electrical position indicator, intelligent programming for GEMÜ 600, 610, 690 d DN Function Type Size mm inch Position indicator without mounting kit Open-Closed 1235 ½ - 4 Mounting kit for GEMÜ S01Z When ordering an electrical position indicator, please specify the complete valve type key as the mounting kit is valve-specific. Complete order key for mounting kit upon request. Accessories 47

48 5 1251/1252, 1256/1257 Limit switches for GEMÜ 833, 834, 883 (DN 25 50) Version Max. contact Min. contact Order code Z Z Limit switches for GEMÜ 883 (DN ) Version Max. contact Min. contact Order code Z Z 48 Accessories

49 Instrument sensor, continuous measurement for GEMÜ 833, 834, 883 d DN Function Order code Size mm inch for GEMÜ Z1001 ½ - ¾ for GEMÜ Z for GEMÜ 833/ Z2501 1¼ - 2 with integrated 2-wire measuring transducer for GEMÜ Z1001 ½ - ¾ for GEMÜ Z for GEMÜ 833/ Z2501 1¼ - 2 Accessories 49

50 Purity, Perfection, Safety The highest quality assurance is our standard To guarantee absolute purity, we manufacture, clean, assemble and pack all High Purity products in cleanroom environments. Injection molding In separate rooms (only HP materials) under Laminar Flow, class Cleaning of High Purity products Fully automatic 3-chamber purifier, prewash with DI water/ tenside, ultrasonic cleaning and final rinse with DI water (»all wetted parts«in PVDF and Halar), drying (hot air cleanroom class 1000) 18.2 M DI water. DI water treatment plant 18.2 M DI water for cleaning and testing, pendulum softening, reverse osmosis, UV sterilization, MB ion exchanger, polishing, submicron filter, PVDF-HP loop, recirculation. 50

51 Assembly, test, packing The entire process comprising cleaning, assembly, test and mounting takes place in cleanroom class 100. Quality assurance The production of the GEMÜ High Purity products are subject to a state-of-the-art continuous quality management system. Use of specified/tested raw materials SPC-statistical process control Training of our personnel Third-party inspection Customer audits Continuous improvements ensure a constant high quality which corresponds to the requirements of our customers and their product applications. 51

52 VALVES, MEASUREMENT AND CONTROL SYSTEMS GEMÜ Valves INC Camp Creek Parkway Suite 120, Building 2600 Atlanta, Georgia Phone: Telefax: Subject to alteration 03/

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,

More information

600, 630. Diaphragm Valve, Plastic

600, 630. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

More information

Product overview and technical data. FlareStar Ultra pure PFA tube and weld fittings

Product overview and technical data. FlareStar Ultra pure PFA tube and weld fittings Product overview and technical data FlareStar Ultra pure PF tube and weld fittings FlareStar THE RESULT OF RESERH, INNOVTION N PPLITION MILESTONE IN HIGH PURITY Since 1988, has been an Industry leader

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position

More information

Diaphragm valve, Plastic

Diaphragm valve, Plastic Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves,

More information

R690. Diaphragm Valve, Plastic

R690. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled

More information

R677. Diaphragm Valve, Plastic

R677. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

More information

GEMÜ R680 Motorized diaphragm valve

GEMÜ R680 Motorized diaphragm valve Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems.

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Diaphragm Valve, Plastic 2/2 way, motorized

Diaphragm Valve, Plastic 2/2 way, motorized Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features

More information

Diaphragm valve MV 309

Diaphragm valve MV 309 Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Your first choice in valve technology

Your first choice in valve technology Your first choice in valve technology Facts and figures GEMÜ an international successful family owned enterprise, based in the Hohenlohe area, the strongest region of Baden-Württemberg, South Germany over

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Product Range Valves, Measurement and Control Systems

Product Range Valves, Measurement and Control Systems Product Range Valves, Measurement and Control Systems Innovative technology The GEMÜ Group is a leading manufacturer of valves, measurement and control systems employing over 1700 members of staff worldwide.

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical

More information

Membranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4

Membranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4 Membranventil Kunststoff, DN - 50 Diaphragm Valve Plastic, DN - 50 DE GB ORIGINAL EINBAU- UND MONTAGEANLEITUNG INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS GEMÜ 600 Antriebsgröße Code -4 Actuator

More information

Butterfly valves Plastic and Metal

Butterfly valves Plastic and Metal Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm

More information

710, 717, 723. Ball Valve, Plastic

710, 717, 723. Ball Valve, Plastic Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance

More information

Diaphragm Valve MV 309

Diaphragm Valve MV 309 Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial

More information

Flowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing

Flowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*

More information

Plastic Valves and Flowmeters

Plastic Valves and Flowmeters Plastic Valves and Flowmeters The correct valve selection creates security Within the various areas of application, valves are subject to widely different requirements. Chemical and physical properties

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control

More information

Plastic Valves and Flowmeters

Plastic Valves and Flowmeters Plastic Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Contents GEMÜ Innovative technology... 4 Product applications... 5-7 Valve designs Valve designs

More information

N086, N186, N786. Pressure retaining valve, Plastic

N086, N186, N786. Pressure retaining valve, Plastic Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled

More information

485 - NC NO/DA DN

485 - NC NO/DA DN 485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The

More information

PNEUMATICALLY ACTUATED 2-WAY

PNEUMATICALLY ACTUATED 2-WAY 482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing

More information

Control valve BioStar control

Control valve BioStar control Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending

More information

Flowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885

Flowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885 Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media

More information

George Fischer Zero Static Valve Type 319 and 319-HTR

George Fischer Zero Static Valve Type 319 and 319-HTR Diaphragm Valves George Fischer Zero Static Valve Type 39 and 39-HTR The Type 39 Zero Static Valve is ideally suited to eliminate dead legs in ultrapure water systems. Ergonomic, snap-on handwheel easy

More information

653, 654. Diaphragm Valve, Metal

653, 654. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature

More information

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional

More information

Tank Bottom Valve, Metal

Tank Bottom Valve, Metal Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve

More information

DK AND DK/CP DN 15 65

DK AND DK/CP DN 15 65 DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.

More information

Lock it in with IPEX DK Series Dialock. Diaphragm Valves. IPEX DK Series Dialock Diaphragm Valve VALVE AVAILABILITY

Lock it in with IPEX DK Series Dialock. Diaphragm Valves. IPEX DK Series Dialock Diaphragm Valve VALVE AVAILABILITY IPEX DK Series Dialock Diaphragm Valve Lock it in with IPEX DK Series Dialock Diaphragm Valves IPEX is pleased to introduce our new DK Series Dialock Diaphragm Valves, available in manual and pneumatically

More information

SilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal

SilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Manual & Actuated Valves

Manual & Actuated Valves GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems

More information

Angle Seat Control Valve 7020

Angle Seat Control Valve 7020 Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid

More information

/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic

/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*

More information

GEMÜ 717 Manually operated ball valve

GEMÜ 717 Manually operated ball valve Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The

More information

Flowmeter DFM

Flowmeter DFM Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,

More information

Globe Valve, Metal. Sectional drawing

Globe Valve, Metal. Sectional drawing Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

More information

GEMÜ 205 Electrically operated solenoid valve

GEMÜ 205 Electrically operated solenoid valve Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator

More information

Butterfly valves Plastic and Metal

Butterfly valves Plastic and Metal Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz

More information

Ultra Proline. ECTFE (Halar ) Single Wall Piping System

Ultra Proline. ECTFE (Halar ) Single Wall Piping System ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland

More information

Pressure Reducing Valve V782

Pressure Reducing Valve V782 Pressure Reducing Valve V General Function The V Pressure Reducing Valve reduces the pressure within the system to a pre-set value. By using the differential pressure, the pressure reducing valve adjusts

More information

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL. CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which

More information

2/2 Pressure operated valves

2/2 Pressure operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54

More information

C 200 Modern Construction. Flexible Modular Design. Highest Safety.

C 200 Modern Construction. Flexible Modular Design. Highest Safety. Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information

Angle Seat Valve SV 300

Angle Seat Valve SV 300 Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and

More information

Type 561/562 Cone Check Valve

Type 561/562 Cone Check Valve Type 561/562 Cone Check Valve Standard Features Size 3/8 4 Material Body: PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVDF, ABS Spring (562 only): Stainless Steel Optional: Nimonic C/Hastelloy C,

More information

2/2-Way and T Valve Bodies in Stainless Steel

2/2-Way and T Valve Bodies in Stainless Steel 2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The

More information

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

CATALOG. Metal Diaphragm Valves for industrial applications SMART IN FLOW CONTROL.

CATALOG. Metal Diaphragm Valves for industrial applications SMART IN FLOW CONTROL. CATALOG Metal Diaphragm Valves for industrial applications SMART IN FLOW CONTROL. 2 www.sed-flowcontrol.com TABLE OF CONTENTS Introduction 04 Company 04 Production and Quality 05 Applications 06 Overview

More information

Pressure relief valve DHV 718

Pressure relief valve DHV 718 Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless

More information

Ball Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.

Ball Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation. ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange

More information

ASAHIPUR. High Purity Piping Systems. Purad PolyPure PP-Pure Purflon Frank Regulators SP Series Welding Equipment

ASAHIPUR. High Purity Piping Systems. Purad PolyPure PP-Pure Purflon Frank Regulators SP Series Welding Equipment ASAHIPUR High Purity Piping Systems Purad PolyPure PP-Pure Purflon Frank Regulators SP Series Welding Equipment High Purity and Wet Process Solutions Asahi/America offers the most advanced high purity

More information

2/2-Way and T Valve Bodies in Stainless Steel

2/2-Way and T Valve Bodies in Stainless Steel 2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and

More information

GEMÜ 710 Pneumatically operated ball valve

GEMÜ 710 Pneumatically operated ball valve Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or

More information

Diaphragm Valve MV 310

Diaphragm Valve MV 310 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation

More information

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

More information

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

Control Valve, Plastic/Metal

Control Valve, Plastic/Metal Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally

More information

Distributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP

Distributed By Aetna Plastics   Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,

More information

410, 417, 423. Butterfly valve, Plastic

410, 417, 423. Butterfly valve, Plastic Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available

More information

Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request

Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*

More information

INSERTION Adaptor for analysis

INSERTION Adaptor for analysis INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing

More information

George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028

George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028 George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories

More information

Angle Seat Valve /2" up to 3"

Angle Seat Valve /2 up to 3 1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure

More information

ARI-STEVI 470 / 471 (DN15-150)

ARI-STEVI 470 / 471 (DN15-150) With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic

More information

Globe Valve, Metal. Sectional view

Globe Valve, Metal. Sectional view Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the

More information

GEMÜ sterile sampling systems

GEMÜ sterile sampling systems GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,

More information

Type 514, 515, 517, 519

Type 514, 515, 517, 519 Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,

More information

EDELSTAHL. Kämmer Series Aseptic and Sanitary Valves

EDELSTAHL. Kämmer Series Aseptic and Sanitary Valves EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the

More information

PNEUMATIC VALVES HYGIENIC series

PNEUMATIC VALVES HYGIENIC series PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435

More information