Ball Valves. Features

Transcription

1 Catalog HY14-252/U Technical Information eries BVMM General Description eries BVMM is a manifold mounted high pressure 414 Bar (6 PI) 2 or 3-way ball valve. Manifold mounting eliminates an external fluid connection. Operation eries BVMM valves operate through either 9 or 18 depending on the ball pattern chosen. For 3-way valves, pressure is applied to Port 1. pecifications Maximum Pressure Body Material Ball Material pindle Material tandard Handle 414 Bar (6 PI) Carbon teel, Black Oxide teel, Chrome Plated teel, Nickel Plated teel, Offset, Nickel Plated Features Ball eals Delrin + Mo 2 Variety of ball patterns allow for different flow paths and flexibility for many applications. pindle eals Operating Temperature O-Rings & Backup, Nitrile -3 C to +1 C (-22 F to +212 F) Thrust bearings in the spindle and delrin moly ball seals result in low actuation torque as well as extended service life. Performance Curves PI Bar Pressure Drop Pressure Drop at Flow Curve, L-Bore "1" Ball 3 ¼" / 8 " ½" ¾" 1" 1¼" 3. Actuation Torque Pressure LPM GPM 38 1 Flow ½" Actuation Torque (in-lbs x 1) Bar PI 7 1 Line Pressure 1 1/2" 1 1/4" 1" 3/4" 1/2" 3/8" 1/4" p65, dd 37 lyria, Ohio, UA

2 Catalog HY14-252/U Ordering Information eries BVMM BVMM eries ize Ball Pattern ize 4 1/4" 6 3/8" 8 1/2" 12 3/4" 16 1" 2 1 1/4" /2" 32 2" Body Material teel Ball & tem Material teel Ball eals tem eals Options Design eries NOT: Not required when ordering. 1 Delrin 2 * PTF 4 Peek * Valve pressure rating reduced. Consult factory. N V Nitrile Fluorocarbon PR A Locking Handle C 1 Way Limit witch G Flat Non-offset Handle * 1 Way Limit witch w/lock * witch is set to indicate valve open condition When selecting this option, your ball valve will come with limit switch bracket, but does not include the switch. The switch is sold separately (Part #LB) Weights kg (lbs.) (2.5 ) 6 2. (4.4) (5.1) (7.5) (11.5 ) (23.1) (33.3) (52.9 ) Multiway Manifold Mount Valve Porting Options Handle Phase top Ball IO Circuit Ball Washer ymbol Pattern 1 2-Way 2 L-Bore Port Overlap 3 L-Bore No Overlap 4 T-Bore 9 5 T-Bore 18 Please request a certified print before building a manifold. For 3-way valves, pressure is applied to Port p65, dd 38 lyria, Ohio, UA

3 Catalog HY14-252/U Dimensions eries BVMM Manifold Mounted A D H J F G B C L Please request a certified print before building a manifold. Port Working Dimensions mm (in) ize Pressure A B C L D F G H J BVMM 2-Way and 3-Way Manifold Mounted 4 1 1/4" 414 Bar n/a 35. (6 PI) (2.62) (1.5) (.24) (.375) (2.) (4.5) (3.8) (1.653) (n/a) (1.377) 6 1 3/8" 414 Bar n/a 4. (6 PI) (3.22) (1.97) (.38) (.375) (2.25) (4.5) (3.55) (2.165) (n/a) (1.575) 8 1/2" 414 Bar (6 PI) (4.) (1.97) (.51) (.375) (2.25) (4.5) (3.54) (3.267) (1.634) (1.771) 12 3/4" 414 Bar (6 PI) (5.57) (2.73) (.79) (.375) (2.75) (7.) (5.18) (3.818) (1.99) (2.7) 16 1" 414 Bar (6 PI) (6.16) (3.19) (.94) (.375) (3.25) (7.) (5.63) (4.528) (2.264) (2.362) 2 1 1/4" 414 Bar (6 PI) (7.1) (3.94) (1.25) (.5) (4.) (1.) (7.5) (5.354) (2.677) (3.7) /2" 414 Bar (6 PI) (7.72) (3.95) (1.5) (.69) (5.) (1.) (7.7) (4.49) (2.199) (3.74) 32 2" 414 Bar (6 PI) (9.72) (4.88) (1.88) (.88) (6.) (1.) (7.99) (5.354) (2.684) (4.49) NOT: (1) These sizes use only the four outside mounting holes. Dimension J is not applicable. (2) Ball portings for multiway valves are somewhat smaller than their 2-way counterparts. Please refer to dimension C to confirm suitability p65, dd 39 lyria, Ohio, UA

4 Catalog HY14-252/U Dimensions eries BVMM Manifold Porting pecifications F G A top pin on top of valve to indicate orientation C D B For 3-way valves, pressure is applied to Port 1. Please request a certified print before building a manifold. Port ize A B C D F G BVMM Mounting Pad pecifications 4 1/4" (.5) (.642) (.67) (1.535) (.33) (.612) (.312) 6 3/8" (.625) (.86) (.75) (1.732) (.33) (.77) (.34) 8 1/2" (.75) (.947) (1.243) (2.283) (.33) (.293) (.24) 12 3/4" (1.63) (1.594) (1.56) (2.716) (.41) (.892) (.372) 16 1" (1.313) (1.549) (1.692) (3.188) (.51) (.76) (.444) 2 1 1/4" (1.563) (1.58) (1.97) (3.78) (.51) (.676) (.465) /2" (1.875) (1.661) (2.199) (4.49) (.66) (1.661) (.63) 32 2" (2.25) (2.176) (2.684) (5.354) (.81) (2.178).796) p65, dd 4 lyria, Ohio, UA

5 Catalog HY14-252/U eal it Accessories eries BVMM Ball Valve eal its restore a ball valve to factory specifications, providing no erosion or metal-to-metal wear has taken place. The eal it includes all the o-rings, ball seals and thrust bearings that were originally installed at the factory. A sketch of these parts is provided at the right. OM MODL Ordering Information BVMM Accessory eries ize Ball Body Pattern Material eal it Ball & tem Material Ball eals tem eals Design eries NOT: Not required when ordering. ize 4 1/4" 6 3/8" 8 1/2" 12 3/4" 16 1" 2 1 1/4" /2" 32 2" teel 1 Delrin 2 * PTF 4 Peek * Valve pressure rating reduced. Consult factory. N V Nitrile Fluorocarbon PR teel Multiway Manifold Mount Valve Porting Options Handle Phase top Ball IO Circuit Ball Washer ymbol Pattern 1 2-Way 2 L-Bore Port Overlap 3 L-Bore No Overlap 4 T-Bore 9 5 T-Bore p65, dd 41 lyria, Ohio, UA

6 Catalog HY14-252/U Locking Handle it Accessories eries BVMM BVMM2L: tandard eries 'BVMM2L-*' kit replaces the stopwasher with a stationary and moving plate, as illustrated below. As the handle is actuated, the moving plate aligns with one of the two locking positions in the stationary plate, enabling the valve to be locked in either fully closed or fully open position. Ordering Information BVMM tandard Locking ize (Part Number) 4 1/4" BVMM2L-1 6 3/8" BVMM2L-2 8 1/2" BVMM2L /4" BVMM2L " BVMM2L /4" BVMM2L /2" BVMM2L " BVMM2L p65, dd 42 lyria, Ohio, UA